git.oblomov.eu Git - linux-2.6/blob - drivers/idle/i7300_idle.c

   1 /*
   2  * (C) Copyright 2008 Intel Corporation
   3  * Authors:
   4  * Andy Henroid <andrew.d.henroid@intel.com>
   5  * Venkatesh Pallipadi <venkatesh.pallipadi@intel.com>
   6  */
   7
   8 /*
   9  * Save DIMM power on Intel 7300-based platforms when all CPUs/cores
  10  * are idle, using the DIMM thermal throttling capability.
  11  *
  12  * This driver depends on the Intel integrated DMA controller (I/O AT).
  13  * If the driver for I/O AT (drivers/dma/ioatdma*) is also enabled,
  14  * this driver should work cooperatively.
  15  */
  16
  17 /* #define DEBUG */
  18
  19 #include <linux/module.h>
  20 #include <linux/pci.h>
  21 #include <linux/sched.h>
  22 #include <linux/notifier.h>
  23 #include <linux/cpumask.h>
  24 #include <linux/ktime.h>
  25 #include <linux/delay.h>
  26 #include <linux/debugfs.h>
  27 #include <linux/stop_machine.h>
  28 #include <linux/i7300_idle.h>
  29
  30 #include <asm/idle.h>
  31
  32 #include "../dma/ioatdma_hw.h"
  33 #include "../dma/ioatdma_registers.h"
  34
  35 #define I7300_IDLE_DRIVER_VERSION       "1.55"
  36 #define I7300_PRINT                     "i7300_idle:"
  37
  38 #define MAX_STOP_RETRIES        10
  39
  40 static int debug;
  41 module_param_named(debug, debug, uint, 0644);
  42 MODULE_PARM_DESC(debug, "Enable debug printks in this driver");
  43
  44 #define dprintk(fmt, arg...) \
  45         do { if (debug) printk(KERN_INFO I7300_PRINT fmt, ##arg); } while (0)
  46
  47 /*
  48  * Value to set THRTLOW to when initiating throttling
  49  *  0 = No throttling
  50  *  1 = Throttle when > 4 activations per eval window (Maximum throttling)
  51  *  2 = Throttle when > 8 activations
  52  *  168 = Throttle when > 672 activations (Minimum throttling)
  53  */
  54 #define MAX_THROTTLE_LOW_LIMIT          168
  55 static uint throttle_low_limit = 1;
  56 module_param_named(throttle_low_limit, throttle_low_limit, uint, 0644);
  57 MODULE_PARM_DESC(throttle_low_limit,
  58                 "Value for THRTLOWLM activation field "
  59                 "(0 = disable throttle, 1 = Max throttle, 168 = Min throttle)");
  60
  61 /*
  62  * simple invocation and duration statistics
  63  */
  64 static unsigned long total_starts;
  65 static unsigned long total_us;
  66
  67 #ifdef DEBUG
  68 static unsigned long past_skip;
  69 #endif
  70
  71 static struct pci_dev *fbd_dev;
  72
  73 static spinlock_t i7300_idle_lock;
  74 static int i7300_idle_active;
  75
  76 static u8 i7300_idle_thrtctl_saved;
  77 static u8 i7300_idle_thrtlow_saved;
  78 static u32 i7300_idle_mc_saved;
  79
  80 static cpumask_t idle_cpumask;
  81 static ktime_t start_ktime;
  82 static unsigned long avg_idle_us;
  83
  84 static struct dentry *debugfs_dir;
  85
  86 /* Begin: I/O AT Helper routines */
  87
  88 #define IOAT_CHANBASE(ioat_ctl, chan) (ioat_ctl + 0x80 + 0x80 * chan)
  89 /* Snoop control (disable snoops when coherency is not important) */
  90 #define IOAT_DESC_SADDR_SNP_CTL (1UL << 1)
  91 #define IOAT_DESC_DADDR_SNP_CTL (1UL << 2)
  92
  93 static struct pci_dev *ioat_dev;
  94 static struct ioat_dma_descriptor *ioat_desc; /* I/O AT desc & data (1 page) */
  95 static unsigned long ioat_desc_phys;
  96 static u8 *ioat_iomap; /* I/O AT memory-mapped control regs (aka CB_BAR) */
  97 static u8 *ioat_chanbase;
  98
  99 /* Start I/O AT memory copy */
 100 static int i7300_idle_ioat_start(void)
 101 {
 102         u32 err;
 103         /* Clear error (due to circular descriptor pointer) */
 104         err = readl(ioat_chanbase + IOAT_CHANERR_OFFSET);
 105         if (err)
 106                 writel(err, ioat_chanbase + IOAT_CHANERR_OFFSET);
 107
 108         writeb(IOAT_CHANCMD_START, ioat_chanbase + IOAT1_CHANCMD_OFFSET);
 109         return 0;
 110 }
 111
 112 /* Stop I/O AT memory copy */
 113 static void i7300_idle_ioat_stop(void)
 114 {
 115         int i;
 116         u64 sts;
 117
 118         for (i = 0; i < MAX_STOP_RETRIES; i++) {
 119                 writeb(IOAT_CHANCMD_RESET,
 120                         ioat_chanbase + IOAT1_CHANCMD_OFFSET);
 121
 122                 udelay(10);
 123
 124                 sts = readq(ioat_chanbase + IOAT1_CHANSTS_OFFSET) &
 125                         IOAT_CHANSTS_DMA_TRANSFER_STATUS;
 126
 127                 if (sts != IOAT_CHANSTS_DMA_TRANSFER_STATUS_ACTIVE)
 128                         break;
 129
 130         }
 131
 132         if (i == MAX_STOP_RETRIES) {
 133                 dprintk("failed to stop I/O AT after %d retries\n",
 134                         MAX_STOP_RETRIES);
 135         }
 136 }
 137
 138 /* Test I/O AT by copying 1024 byte from 2k to 1k */
 139 static int __init i7300_idle_ioat_selftest(u8 *ctl,
 140                 struct ioat_dma_descriptor *desc, unsigned long desc_phys)
 141 {
 142         u64 chan_sts;
 143
 144         memset(desc, 0, 2048);
 145         memset((u8 *) desc + 2048, 0xab, 1024);
 146
 147         desc[0].size = 1024;
 148         desc[0].ctl = 0;
 149         desc[0].src_addr = desc_phys + 2048;
 150         desc[0].dst_addr = desc_phys + 1024;
 151         desc[0].next = 0;
 152
 153         writeb(IOAT_CHANCMD_RESET, ioat_chanbase + IOAT1_CHANCMD_OFFSET);
 154         writeb(IOAT_CHANCMD_START, ioat_chanbase + IOAT1_CHANCMD_OFFSET);
 155
 156         udelay(1000);
 157
 158         chan_sts = readq(ioat_chanbase + IOAT1_CHANSTS_OFFSET) &
 159                         IOAT_CHANSTS_DMA_TRANSFER_STATUS;
 160
 161         if (chan_sts != IOAT_CHANSTS_DMA_TRANSFER_STATUS_DONE) {
 162                 /* Not complete, reset the channel */
 163                 writeb(IOAT_CHANCMD_RESET,
 164                        ioat_chanbase + IOAT1_CHANCMD_OFFSET);
 165                 return -1;
 166         }
 167
 168         if (*(u32 *) ((u8 *) desc + 3068) != 0xabababab ||
 169             *(u32 *) ((u8 *) desc + 2044) != 0xabababab) {
 170                 dprintk("Data values src 0x%x, dest 0x%x, memset 0x%x\n",
 171                         *(u32 *) ((u8 *) desc + 2048),
 172                         *(u32 *) ((u8 *) desc + 1024),
 173                         *(u32 *) ((u8 *) desc + 3072));
 174                 return -1;
 175         }
 176         return 0;
 177 }
 178
 179 static struct device dummy_dma_dev = {
 180         .bus_id = "fallback device",
 181         .coherent_dma_mask = DMA_64BIT_MASK,
 182         .dma_mask = &dummy_dma_dev.coherent_dma_mask,
 183 };
 184
 185 /* Setup and initialize I/O AT */
 186 /* This driver needs I/O AT as the throttling takes effect only when there is
 187  * some memory activity. We use I/O AT to set up a dummy copy, while all CPUs
 188  * go idle and memory is throttled.
 189  */
 190 static int __init i7300_idle_ioat_init(void)
 191 {
 192         u8 ver, chan_count, ioat_chan;
 193         u16 chan_ctl;
 194
 195         ioat_iomap = (u8 *) ioremap_nocache(pci_resource_start(ioat_dev, 0),
 196                                             pci_resource_len(ioat_dev, 0));
 197
 198         if (!ioat_iomap) {
 199                 printk(KERN_ERR I7300_PRINT "failed to map I/O AT registers\n");
 200                 goto err_ret;
 201         }
 202
 203         ver = readb(ioat_iomap + IOAT_VER_OFFSET);
 204         if (ver != IOAT_VER_1_2) {
 205                 printk(KERN_ERR I7300_PRINT "unknown I/O AT version (%u.%u)\n",
 206                         ver >> 4, ver & 0xf);
 207                 goto err_unmap;
 208         }
 209
 210         chan_count = readb(ioat_iomap + IOAT_CHANCNT_OFFSET);
 211         if (!chan_count) {
 212                 printk(KERN_ERR I7300_PRINT "unexpected # of I/O AT channels "
 213                         "(%u)\n",
 214                         chan_count);
 215                 goto err_unmap;
 216         }
 217
 218         ioat_chan = chan_count - 1;
 219         ioat_chanbase = IOAT_CHANBASE(ioat_iomap, ioat_chan);
 220
 221         chan_ctl = readw(ioat_chanbase + IOAT_CHANCTRL_OFFSET);
 222         if (chan_ctl & IOAT_CHANCTRL_CHANNEL_IN_USE) {
 223                 printk(KERN_ERR I7300_PRINT "channel %d in use\n", ioat_chan);
 224                 goto err_unmap;
 225         }
 226
 227         writew(IOAT_CHANCTRL_CHANNEL_IN_USE,
 228                 ioat_chanbase + IOAT_CHANCTRL_OFFSET);
 229
 230         ioat_desc = (struct ioat_dma_descriptor *)dma_alloc_coherent(
 231                         &dummy_dma_dev, 4096,
 232                         (dma_addr_t *)&ioat_desc_phys, GFP_KERNEL);
 233         if (!ioat_desc) {
 234                 printk(KERN_ERR I7300_PRINT "failed to allocate I/O AT desc\n");
 235                 goto err_mark_unused;
 236         }
 237
 238         writel(ioat_desc_phys & 0xffffffffUL,
 239                ioat_chanbase + IOAT1_CHAINADDR_OFFSET_LOW);
 240         writel(ioat_desc_phys >> 32,
 241                ioat_chanbase + IOAT1_CHAINADDR_OFFSET_HIGH);
 242
 243         if (i7300_idle_ioat_selftest(ioat_iomap, ioat_desc, ioat_desc_phys)) {
 244                 printk(KERN_ERR I7300_PRINT "I/O AT self-test failed\n");
 245                 goto err_free;
 246         }
 247
 248         /* Setup circular I/O AT descriptor chain */
 249         ioat_desc[0].ctl = IOAT_DESC_SADDR_SNP_CTL | IOAT_DESC_DADDR_SNP_CTL;
 250         ioat_desc[0].src_addr = ioat_desc_phys + 2048;
 251         ioat_desc[0].dst_addr = ioat_desc_phys + 3072;
 252         ioat_desc[0].size = 128;
 253         ioat_desc[0].next = ioat_desc_phys + sizeof(struct ioat_dma_descriptor);
 254
 255         ioat_desc[1].ctl = ioat_desc[0].ctl;
 256         ioat_desc[1].src_addr = ioat_desc[0].src_addr;
 257         ioat_desc[1].dst_addr = ioat_desc[0].dst_addr;
 258         ioat_desc[1].size = ioat_desc[0].size;
 259         ioat_desc[1].next = ioat_desc_phys;
 260
 261         return 0;
 262
 263 err_free:
 264         dma_free_coherent(&dummy_dma_dev, 4096, (void *)ioat_desc, 0);
 265 err_mark_unused:
 266         writew(0, ioat_chanbase + IOAT_CHANCTRL_OFFSET);
 267 err_unmap:
 268         iounmap(ioat_iomap);
 269 err_ret:
 270         return -ENODEV;
 271 }
 272
 273 /* Cleanup I/O AT */
 274 static void __exit i7300_idle_ioat_exit(void)
 275 {
 276         int i;
 277         u64 chan_sts;
 278
 279         i7300_idle_ioat_stop();
 280
 281         /* Wait for a while for the channel to halt before releasing */
 282         for (i = 0; i < MAX_STOP_RETRIES; i++) {
 283                 writeb(IOAT_CHANCMD_RESET,
 284                        ioat_chanbase + IOAT1_CHANCMD_OFFSET);
 285
 286                 chan_sts = readq(ioat_chanbase + IOAT1_CHANSTS_OFFSET) &
 287                         IOAT_CHANSTS_DMA_TRANSFER_STATUS;
 288
 289                 if (chan_sts != IOAT_CHANSTS_DMA_TRANSFER_STATUS_ACTIVE) {
 290                         writew(0, ioat_chanbase + IOAT_CHANCTRL_OFFSET);
 291                         break;
 292                 }
 293                 udelay(1000);
 294         }
 295
 296         chan_sts = readq(ioat_chanbase + IOAT1_CHANSTS_OFFSET) &
 297                         IOAT_CHANSTS_DMA_TRANSFER_STATUS;
 298
 299         /*
 300          * We tried to reset multiple times. If IO A/T channel is still active
 301          * flag an error and return without cleanup. Memory leak is better
 302          * than random corruption in that extreme error situation.
 303          */
 304         if (chan_sts == IOAT_CHANSTS_DMA_TRANSFER_STATUS_ACTIVE) {
 305                 printk(KERN_ERR I7300_PRINT "Unable to stop IO A/T channels."
 306                         " Not freeing resources\n");
 307                 return;
 308         }
 309
 310         dma_free_coherent(&dummy_dma_dev, 4096, (void *)ioat_desc, 0);
 311         iounmap(ioat_iomap);
 312 }
 313
 314 /* End: I/O AT Helper routines */
 315
 316 #define DIMM_THRTLOW 0x64
 317 #define DIMM_THRTCTL 0x67
 318 #define DIMM_THRTCTL_THRMHUNT (1UL << 0)
 319 #define DIMM_MC 0x40
 320 #define DIMM_GTW_MODE (1UL << 17)
 321 #define DIMM_GBLACT 0x60
 322
 323 /*
 324  * Keep track of an exponential-decaying average of recent idle durations.
 325  * The latest duration gets DURATION_WEIGHT_PCT percentage weight
 326  * in this average, with the old average getting the remaining weight.
 327  *
 328  * High weights emphasize recent history, low weights include long history.
 329  */
 330 #define DURATION_WEIGHT_PCT 55
 331
 332 /*
 333  * When the decaying average of recent durations or the predicted duration
 334  * of the next timer interrupt is shorter than duration_threshold, the
 335  * driver will decline to throttle.
 336  */
 337 #define DURATION_THRESHOLD_US 100
 338
 339
 340 /* Store DIMM thermal throttle configuration */
 341 static int i7300_idle_thrt_save(void)
 342 {
 343         u32 new_mc_val;
 344         u8 gblactlm;
 345
 346         pci_read_config_byte(fbd_dev, DIMM_THRTCTL, &i7300_idle_thrtctl_saved);
 347         pci_read_config_byte(fbd_dev, DIMM_THRTLOW, &i7300_idle_thrtlow_saved);
 348         pci_read_config_dword(fbd_dev, DIMM_MC, &i7300_idle_mc_saved);
 349         /*
 350          * Make sure we have Global Throttling Window Mode set to have a
 351          * "short" window. This (mostly) works around an issue where
 352          * throttling persists until the end of the global throttling window
 353          * size. On the tested system, this was resulting in a maximum of
 354          * 64 ms to exit throttling (average 32 ms). The actual numbers
 355          * depends on system frequencies. Setting the short window reduces
 356          * this by a factor of 4096.
 357          *
 358          * We will only do this only if the system is set for
 359          * unlimited-activations while in open-loop throttling (i.e., when
 360          * Global Activation Throttle Limit is zero).
 361          */
 362         pci_read_config_byte(fbd_dev, DIMM_GBLACT, &gblactlm);
 363         dprintk("thrtctl_saved = 0x%02x, thrtlow_saved = 0x%02x\n",
 364                 i7300_idle_thrtctl_saved,
 365                 i7300_idle_thrtlow_saved);
 366         dprintk("mc_saved = 0x%08x, gblactlm = 0x%02x\n",
 367                 i7300_idle_mc_saved,
 368                 gblactlm);
 369         if (gblactlm == 0) {
 370                 new_mc_val = i7300_idle_mc_saved | DIMM_GTW_MODE;
 371                 pci_write_config_dword(fbd_dev, DIMM_MC, new_mc_val);
 372                 return 0;
 373         } else {
 374                 dprintk("could not set GTW_MODE = 1 (OLTT enabled)\n");
 375                 return -ENODEV;
 376         }
 377 }
 378
 379 /* Restore DIMM thermal throttle configuration */
 380 static void i7300_idle_thrt_restore(void)
 381 {
 382         pci_write_config_dword(fbd_dev, DIMM_MC, i7300_idle_mc_saved);
 383         pci_write_config_byte(fbd_dev, DIMM_THRTLOW, i7300_idle_thrtlow_saved);
 384         pci_write_config_byte(fbd_dev, DIMM_THRTCTL, i7300_idle_thrtctl_saved);
 385 }
 386
 387 /* Enable DIMM thermal throttling */
 388 static void i7300_idle_start(void)
 389 {
 390         u8 new_ctl;
 391         u8 limit;
 392
 393         new_ctl = i7300_idle_thrtctl_saved & ~DIMM_THRTCTL_THRMHUNT;
 394         pci_write_config_byte(fbd_dev, DIMM_THRTCTL, new_ctl);
 395
 396         limit = throttle_low_limit;
 397         if (unlikely(limit > MAX_THROTTLE_LOW_LIMIT))
 398                 limit = MAX_THROTTLE_LOW_LIMIT;
 399
 400         pci_write_config_byte(fbd_dev, DIMM_THRTLOW, limit);
 401
 402         new_ctl = i7300_idle_thrtctl_saved | DIMM_THRTCTL_THRMHUNT;
 403         pci_write_config_byte(fbd_dev, DIMM_THRTCTL, new_ctl);
 404 }
 405
 406 /* Disable DIMM thermal throttling */
 407 static void i7300_idle_stop(void)
 408 {
 409         u8 new_ctl;
 410         u8 got_ctl;
 411
 412         new_ctl = i7300_idle_thrtctl_saved & ~DIMM_THRTCTL_THRMHUNT;
 413         pci_write_config_byte(fbd_dev, DIMM_THRTCTL, new_ctl);
 414
 415         pci_write_config_byte(fbd_dev, DIMM_THRTLOW, i7300_idle_thrtlow_saved);
 416         pci_write_config_byte(fbd_dev, DIMM_THRTCTL, i7300_idle_thrtctl_saved);
 417         pci_read_config_byte(fbd_dev, DIMM_THRTCTL, &got_ctl);
 418         WARN_ON_ONCE(got_ctl != i7300_idle_thrtctl_saved);
 419 }
 420
 421
 422 /*
 423  * i7300_avg_duration_check()
 424  * return 0 if the decaying average of recent idle durations is
 425  * more than DURATION_THRESHOLD_US
 426  */
 427 static int i7300_avg_duration_check(void)
 428 {
 429         if (avg_idle_us >= DURATION_THRESHOLD_US)
 430                 return 0;
 431
 432 #ifdef DEBUG
 433         past_skip++;
 434 #endif
 435         return 1;
 436 }
 437
 438 /* Idle notifier to look at idle CPUs */
 439 static int i7300_idle_notifier(struct notifier_block *nb, unsigned long val,
 440                                 void *data)
 441 {
 442         unsigned long flags;
 443         ktime_t now_ktime;
 444         static ktime_t idle_begin_time;
 445         static int time_init = 1;
 446
 447         if (!throttle_low_limit)
 448                 return 0;
 449
 450         if (unlikely(time_init)) {
 451                 time_init = 0;
 452                 idle_begin_time = ktime_get();
 453         }
 454
 455         spin_lock_irqsave(&i7300_idle_lock, flags);
 456         if (val == IDLE_START) {
 457
 458                 cpu_set(smp_processor_id(), idle_cpumask);
 459
 460                 if (cpus_weight(idle_cpumask) != num_online_cpus())
 461                         goto end;
 462
 463                 now_ktime = ktime_get();
 464                 idle_begin_time = now_ktime;
 465
 466                 if (i7300_avg_duration_check())
 467                         goto end;
 468
 469                 i7300_idle_active = 1;
 470                 total_starts++;
 471                 start_ktime = now_ktime;
 472
 473                 i7300_idle_start();
 474                 i7300_idle_ioat_start();
 475
 476         } else if (val == IDLE_END) {
 477                 cpu_clear(smp_processor_id(), idle_cpumask);
 478                 if (cpus_weight(idle_cpumask) == (num_online_cpus() - 1)) {
 479                         /* First CPU coming out of idle */
 480                         u64 idle_duration_us;
 481
 482                         now_ktime = ktime_get();
 483
 484                         idle_duration_us = ktime_to_us(ktime_sub
 485                                                 (now_ktime, idle_begin_time));
 486
 487                         avg_idle_us =
 488                                 ((100 - DURATION_WEIGHT_PCT) * avg_idle_us +
 489                                  DURATION_WEIGHT_PCT * idle_duration_us) / 100;
 490
 491                         if (i7300_idle_active) {
 492                                 ktime_t idle_ktime;
 493
 494                                 idle_ktime = ktime_sub(now_ktime, start_ktime);
 495                                 total_us += ktime_to_us(idle_ktime);
 496
 497                                 i7300_idle_ioat_stop();
 498                                 i7300_idle_stop();
 499                                 i7300_idle_active = 0;
 500                         }
 501                 }
 502         }
 503 end:
 504         spin_unlock_irqrestore(&i7300_idle_lock, flags);
 505         return 0;
 506 }
 507
 508 static struct notifier_block i7300_idle_nb = {
 509         .notifier_call = i7300_idle_notifier,
 510 };
 511
 512 MODULE_DEVICE_TABLE(pci, pci_tbl);
 513
 514 int stats_open_generic(struct inode *inode, struct file *fp)
 515 {
 516         fp->private_data = inode->i_private;
 517         return 0;
 518 }
 519
 520 static ssize_t stats_read_ul(struct file *fp, char __user *ubuf, size_t count,
 521                                 loff_t *off)
 522 {
 523         unsigned long *p = fp->private_data;
 524         char buf[32];
 525         int len;
 526
 527         len = snprintf(buf, 32, "%lu\n", *p);
 528         return simple_read_from_buffer(ubuf, count, off, buf, len);
 529 }
 530
 531 static const struct file_operations idle_fops = {
 532         .open   = stats_open_generic,
 533         .read   = stats_read_ul,
 534 };
 535
 536 struct debugfs_file_info {
 537         void *ptr;
 538         char name[32];
 539         struct dentry *file;
 540 } debugfs_file_list[] = {
 541                                 {&total_starts, "total_starts", NULL},
 542                                 {&total_us, "total_us", NULL},
 543 #ifdef DEBUG
 544                                 {&past_skip, "past_skip", NULL},
 545 #endif
 546                                 {NULL, "", NULL}
 547                         };
 548
 549 static int __init i7300_idle_init(void)
 550 {
 551         spin_lock_init(&i7300_idle_lock);
 552         cpus_clear(idle_cpumask);
 553         total_us = 0;
 554
 555         if (i7300_idle_platform_probe(&fbd_dev, &ioat_dev))
 556                 return -ENODEV;
 557
 558         if (i7300_idle_thrt_save())
 559                 return -ENODEV;
 560
 561         if (i7300_idle_ioat_init())
 562                 return -ENODEV;
 563
 564         debugfs_dir = debugfs_create_dir("i7300_idle", NULL);
 565         if (debugfs_dir) {
 566                 int i = 0;
 567
 568                 while (debugfs_file_list[i].ptr != NULL) {
 569                         debugfs_file_list[i].file = debugfs_create_file(
 570                                         debugfs_file_list[i].name,
 571                                         S_IRUSR,
 572                                         debugfs_dir,
 573                                         debugfs_file_list[i].ptr,
 574                                         &idle_fops);
 575                         i++;
 576                 }
 577         }
 578
 579         idle_notifier_register(&i7300_idle_nb);
 580
 581         printk(KERN_INFO "i7300_idle: loaded v%s\n", I7300_IDLE_DRIVER_VERSION);
 582         return 0;
 583 }
 584
 585 static void __exit i7300_idle_exit(void)
 586 {
 587         idle_notifier_unregister(&i7300_idle_nb);
 588
 589         if (debugfs_dir) {
 590                 int i = 0;
 591
 592                 while (debugfs_file_list[i].file != NULL) {
 593                         debugfs_remove(debugfs_file_list[i].file);
 594                         i++;
 595                 }
 596
 597                 debugfs_remove(debugfs_dir);
 598         }
 599         i7300_idle_thrt_restore();
 600         i7300_idle_ioat_exit();
 601 }
 602
 603 module_init(i7300_idle_init);
 604 module_exit(i7300_idle_exit);
 605
 606 MODULE_AUTHOR("Andy Henroid <andrew.d.henroid@intel.com>");
 607 MODULE_DESCRIPTION("Intel Chipset DIMM Idle Power Saving Driver v"
 608                         I7300_IDLE_DRIVER_VERSION);
 609 MODULE_LICENSE("GPL");