2 * arch/ppc/platforms/83xx/mpc834x_sys.c
4 * MPC834x SYS board specific routines
6 * Maintainer: Kumar Gala <kumar.gala@freescale.com>
8 * Copyright 2005 Freescale Semiconductor Inc.
10 * This program is free software; you can redistribute it and/or modify it
11 * under the terms of the GNU General Public License as published by the
12 * Free Software Foundation; either version 2 of the License, or (at your
13 * option) any later version.
16 #include <linux/config.h>
17 #include <linux/stddef.h>
18 #include <linux/kernel.h>
19 #include <linux/init.h>
20 #include <linux/errno.h>
21 #include <linux/reboot.h>
22 #include <linux/pci.h>
23 #include <linux/kdev_t.h>
24 #include <linux/major.h>
25 #include <linux/console.h>
26 #include <linux/delay.h>
27 #include <linux/seq_file.h>
28 #include <linux/root_dev.h>
29 #include <linux/serial.h>
30 #include <linux/tty.h> /* for linux/serial_core.h */
31 #include <linux/serial_core.h>
32 #include <linux/initrd.h>
33 #include <linux/module.h>
34 #include <linux/fsl_devices.h>
36 #include <asm/system.h>
37 #include <asm/pgtable.h>
39 #include <asm/atomic.h>
42 #include <asm/machdep.h>
44 #include <asm/bootinfo.h>
45 #include <asm/pci-bridge.h>
46 #include <asm/mpc83xx.h>
49 #include <asm/ppc_sys.h>
50 #include <mm/mmu_decl.h>
52 #include <syslib/ppc83xx_setup.h>
55 unsigned long isa_io_base = 0;
56 unsigned long isa_mem_base = 0;
59 extern unsigned long total_memory; /* in mm/init */
61 unsigned char __res[sizeof (bd_t)];
65 mpc83xx_map_irq(struct pci_dev *dev, unsigned char idsel, unsigned char pin)
67 static char pci_irq_table[][4] =
69 * PCI IDSEL/INTPIN->INTLINE
73 {PIRQA, PIRQB, PIRQC, PIRQD}, /* idsel 0x11 */
74 {PIRQC, PIRQD, PIRQA, PIRQB}, /* idsel 0x12 */
75 {PIRQD, PIRQA, PIRQB, PIRQC} /* idsel 0x13 */
78 const long min_idsel = 0x11, max_idsel = 0x13, irqs_per_slot = 4;
79 return PCI_IRQ_TABLE_LOOKUP;
83 mpc83xx_exclude_device(u_char bus, u_char devfn)
85 return PCIBIOS_SUCCESSFUL;
87 #endif /* CONFIG_PCI */
89 /* ************************************************************************
91 * Setup the architecture
95 mpc834x_sys_setup_arch(void)
97 bd_t *binfo = (bd_t *) __res;
99 struct gianfar_platform_data *pdata;
101 /* get the core frequency */
102 freq = binfo->bi_intfreq;
104 /* Set loops_per_jiffy to a half-way reasonable value,
105 for use until calibrate_delay gets called. */
106 loops_per_jiffy = freq / HZ;
109 /* setup PCI host bridges */
110 mpc83xx_setup_hose();
112 mpc83xx_early_serial_map();
114 /* setup the board related information for the enet controllers */
115 pdata = (struct gianfar_platform_data *) ppc_sys_get_pdata(MPC83xx_TSEC1);
117 pdata->board_flags = FSL_GIANFAR_BRD_HAS_PHY_INTR;
118 pdata->interruptPHY = MPC83xx_IRQ_EXT1;
120 /* fixup phy address */
121 pdata->phy_reg_addr += binfo->bi_immr_base;
122 memcpy(pdata->mac_addr, binfo->bi_enetaddr, 6);
125 pdata = (struct gianfar_platform_data *) ppc_sys_get_pdata(MPC83xx_TSEC2);
127 pdata->board_flags = FSL_GIANFAR_BRD_HAS_PHY_INTR;
128 pdata->interruptPHY = MPC83xx_IRQ_EXT2;
130 /* fixup phy address */
131 pdata->phy_reg_addr += binfo->bi_immr_base;
132 memcpy(pdata->mac_addr, binfo->bi_enet1addr, 6);
135 #ifdef CONFIG_BLK_DEV_INITRD
137 ROOT_DEV = Root_RAM0;
140 #ifdef CONFIG_ROOT_NFS
143 ROOT_DEV = Root_HDA1;
148 mpc834x_sys_map_io(void)
150 /* we steal the lowest ioremap addr for virt space */
151 io_block_mapping(VIRT_IMMRBAR, immrbar, 1024*1024, _PAGE_IO);
155 mpc834x_sys_show_cpuinfo(struct seq_file *m)
157 uint pvid, svid, phid1;
158 bd_t *binfo = (bd_t *) __res;
161 /* get the core frequency */
162 freq = binfo->bi_intfreq;
164 pvid = mfspr(SPRN_PVR);
165 svid = mfspr(SPRN_SVR);
167 seq_printf(m, "Vendor\t\t: Freescale Inc.\n");
168 seq_printf(m, "Machine\t\t: mpc%s sys\n", cur_ppc_sys_spec->ppc_sys_name);
169 seq_printf(m, "core clock\t: %d MHz\n"
170 "bus clock\t: %d MHz\n",
171 (int)(binfo->bi_intfreq / 1000000),
172 (int)(binfo->bi_busfreq / 1000000));
173 seq_printf(m, "PVR\t\t: 0x%x\n", pvid);
174 seq_printf(m, "SVR\t\t: 0x%x\n", svid);
176 /* Display cpu Pll setting */
177 phid1 = mfspr(SPRN_HID1);
178 seq_printf(m, "PLL setting\t: 0x%x\n", ((phid1 >> 24) & 0x3f));
180 /* Display the amount of memory */
181 seq_printf(m, "Memory\t\t: %d MB\n", (int)(binfo->bi_memsize / (1024 * 1024)));
188 mpc834x_sys_init_IRQ(void)
190 bd_t *binfo = (bd_t *) __res;
194 IRQ_SENSE_LEVEL, /* EXT 1 */
195 IRQ_SENSE_LEVEL, /* EXT 2 */
198 IRQ_SENSE_LEVEL, /* EXT 4 */
199 IRQ_SENSE_LEVEL, /* EXT 5 */
200 IRQ_SENSE_LEVEL, /* EXT 6 */
201 IRQ_SENSE_LEVEL, /* EXT 7 */
210 ipic_init(binfo->bi_immr_base + 0x00700, 0, MPC83xx_IPIC_IRQ_OFFSET, senses, 8);
212 /* Initialize the default interrupt mapping priorities,
213 * in case the boot rom changed something on us.
215 ipic_set_default_priority();
218 #if defined(CONFIG_I2C_MPC) && defined(CONFIG_SENSORS_DS1374)
219 extern ulong ds1374_get_rtc_time(void);
220 extern int ds1374_set_rtc_time(ulong);
223 mpc834x_rtc_hookup(void)
227 ppc_md.get_rtc_time = ds1374_get_rtc_time;
228 ppc_md.set_rtc_time = ds1374_set_rtc_time;
231 tv.tv_sec = (ppc_md.get_rtc_time)();
232 do_settimeofday(&tv);
236 late_initcall(mpc834x_rtc_hookup);
238 static __inline__ void
239 mpc834x_sys_set_bat(void)
241 /* we steal the lowest ioremap addr for virt space */
243 mtspr(SPRN_DBAT1U, VIRT_IMMRBAR | 0x1e);
244 mtspr(SPRN_DBAT1L, immrbar | 0x2a);
249 platform_init(unsigned long r3, unsigned long r4, unsigned long r5,
250 unsigned long r6, unsigned long r7)
252 bd_t *binfo = (bd_t *) __res;
254 /* parse_bootinfo must always be called first */
255 parse_bootinfo(find_bootinfo());
258 * If we were passed in a board information, copy it into the
259 * residual data area.
262 memcpy((void *) __res, (void *) (r3 + KERNELBASE),
266 #if defined(CONFIG_BLK_DEV_INITRD)
268 * If the init RAM disk has been configured in, and there's a valid
269 * starting address for it, set it up.
272 initrd_start = r4 + KERNELBASE;
273 initrd_end = r5 + KERNELBASE;
275 #endif /* CONFIG_BLK_DEV_INITRD */
277 /* Copy the kernel command line arguments to a safe place. */
279 *(char *) (r7 + KERNELBASE) = 0;
280 strcpy(cmd_line, (char *) (r6 + KERNELBASE));
283 immrbar = binfo->bi_immr_base;
285 mpc834x_sys_set_bat();
287 #if defined(CONFIG_SERIAL_8250) && defined(CONFIG_SERIAL_TEXT_DEBUG)
291 memset(&p, 0, sizeof (p));
292 p.iotype = SERIAL_IO_MEM;
293 p.membase = (unsigned char __iomem *)(VIRT_IMMRBAR + 0x4500);
294 p.uartclk = binfo->bi_busfreq;
298 memset(&p, 0, sizeof (p));
299 p.iotype = SERIAL_IO_MEM;
300 p.membase = (unsigned char __iomem *)(VIRT_IMMRBAR + 0x4600);
301 p.uartclk = binfo->bi_busfreq;
307 identify_ppc_sys_by_id(mfspr(SPRN_SVR));
309 /* setup the PowerPC module struct */
310 ppc_md.setup_arch = mpc834x_sys_setup_arch;
311 ppc_md.show_cpuinfo = mpc834x_sys_show_cpuinfo;
313 ppc_md.init_IRQ = mpc834x_sys_init_IRQ;
314 ppc_md.get_irq = ipic_get_irq;
316 ppc_md.restart = mpc83xx_restart;
317 ppc_md.power_off = mpc83xx_power_off;
318 ppc_md.halt = mpc83xx_halt;
320 ppc_md.find_end_of_memory = mpc83xx_find_end_of_memory;
321 ppc_md.setup_io_mappings = mpc834x_sys_map_io;
323 ppc_md.time_init = mpc83xx_time_init;
324 ppc_md.set_rtc_time = NULL;
325 ppc_md.get_rtc_time = NULL;
326 ppc_md.calibrate_decr = mpc83xx_calibrate_decr;
328 ppc_md.early_serial_map = mpc83xx_early_serial_map;
329 #if defined(CONFIG_SERIAL_8250) && defined(CONFIG_SERIAL_TEXT_DEBUG)
330 ppc_md.progress = gen550_progress;
331 #endif /* CONFIG_SERIAL_8250 && CONFIG_SERIAL_TEXT_DEBUG */
334 ppc_md.progress("mpc834x_sys_init(): exit", 0);