Merge branch 'for-2.6.24' of git://git.secretlab.ca/git/linux-2.6-mpc52xx
[linux-2.6] / drivers / ssb / driver_chipcommon.c
1 /*
2  * Sonics Silicon Backplane
3  * Broadcom ChipCommon core driver
4  *
5  * Copyright 2005, Broadcom Corporation
6  * Copyright 2006, 2007, Michael Buesch <mb@bu3sch.de>
7  *
8  * Licensed under the GNU/GPL. See COPYING for details.
9  */
10
11 #include <linux/ssb/ssb.h>
12 #include <linux/ssb/ssb_regs.h>
13 #include <linux/pci.h>
14
15 #include "ssb_private.h"
16
17
18 /* Clock sources */
19 enum ssb_clksrc {
20         /* PCI clock */
21         SSB_CHIPCO_CLKSRC_PCI,
22         /* Crystal slow clock oscillator */
23         SSB_CHIPCO_CLKSRC_XTALOS,
24         /* Low power oscillator */
25         SSB_CHIPCO_CLKSRC_LOPWROS,
26 };
27
28
29 static inline u32 chipco_read32(struct ssb_chipcommon *cc,
30                                 u16 offset)
31 {
32         return ssb_read32(cc->dev, offset);
33 }
34
35 static inline void chipco_write32(struct ssb_chipcommon *cc,
36                                   u16 offset,
37                                   u32 value)
38 {
39         ssb_write32(cc->dev, offset, value);
40 }
41
42 static inline void chipco_write32_masked(struct ssb_chipcommon *cc, u16 offset,
43                                          u32 mask, u32 value)
44 {
45         value &= mask;
46         value |= chipco_read32(cc, offset) & ~mask;
47         chipco_write32(cc, offset, value);
48 }
49
50 void ssb_chipco_set_clockmode(struct ssb_chipcommon *cc,
51                               enum ssb_clkmode mode)
52 {
53         struct ssb_device *ccdev = cc->dev;
54         struct ssb_bus *bus;
55         u32 tmp;
56
57         if (!ccdev)
58                 return;
59         bus = ccdev->bus;
60         /* chipcommon cores prior to rev6 don't support dynamic clock control */
61         if (ccdev->id.revision < 6)
62                 return;
63         /* chipcommon cores rev10 are a whole new ball game */
64         if (ccdev->id.revision >= 10)
65                 return;
66         if (!(cc->capabilities & SSB_CHIPCO_CAP_PCTL))
67                 return;
68
69         switch (mode) {
70         case SSB_CLKMODE_SLOW:
71                 tmp = chipco_read32(cc, SSB_CHIPCO_SLOWCLKCTL);
72                 tmp |= SSB_CHIPCO_SLOWCLKCTL_FSLOW;
73                 chipco_write32(cc, SSB_CHIPCO_SLOWCLKCTL, tmp);
74                 break;
75         case SSB_CLKMODE_FAST:
76                 ssb_pci_xtal(bus, SSB_GPIO_XTAL, 1); /* Force crystal on */
77                 tmp = chipco_read32(cc, SSB_CHIPCO_SLOWCLKCTL);
78                 tmp &= ~SSB_CHIPCO_SLOWCLKCTL_FSLOW;
79                 tmp |= SSB_CHIPCO_SLOWCLKCTL_IPLL;
80                 chipco_write32(cc, SSB_CHIPCO_SLOWCLKCTL, tmp);
81                 break;
82         case SSB_CLKMODE_DYNAMIC:
83                 tmp = chipco_read32(cc, SSB_CHIPCO_SLOWCLKCTL);
84                 tmp &= ~SSB_CHIPCO_SLOWCLKCTL_FSLOW;
85                 tmp &= ~SSB_CHIPCO_SLOWCLKCTL_IPLL;
86                 tmp &= ~SSB_CHIPCO_SLOWCLKCTL_ENXTAL;
87                 if ((tmp & SSB_CHIPCO_SLOWCLKCTL_SRC) != SSB_CHIPCO_SLOWCLKCTL_SRC_XTAL)
88                         tmp |= SSB_CHIPCO_SLOWCLKCTL_ENXTAL;
89                 chipco_write32(cc, SSB_CHIPCO_SLOWCLKCTL, tmp);
90
91                 /* for dynamic control, we have to release our xtal_pu "force on" */
92                 if (tmp & SSB_CHIPCO_SLOWCLKCTL_ENXTAL)
93                         ssb_pci_xtal(bus, SSB_GPIO_XTAL, 0);
94                 break;
95         default:
96                 SSB_WARN_ON(1);
97         }
98 }
99
100 /* Get the Slow Clock Source */
101 static enum ssb_clksrc chipco_pctl_get_slowclksrc(struct ssb_chipcommon *cc)
102 {
103         struct ssb_bus *bus = cc->dev->bus;
104         u32 uninitialized_var(tmp);
105
106         if (cc->dev->id.revision < 6) {
107                 if (bus->bustype == SSB_BUSTYPE_SSB ||
108                     bus->bustype == SSB_BUSTYPE_PCMCIA)
109                         return SSB_CHIPCO_CLKSRC_XTALOS;
110                 if (bus->bustype == SSB_BUSTYPE_PCI) {
111                         pci_read_config_dword(bus->host_pci, SSB_GPIO_OUT, &tmp);
112                         if (tmp & 0x10)
113                                 return SSB_CHIPCO_CLKSRC_PCI;
114                         return SSB_CHIPCO_CLKSRC_XTALOS;
115                 }
116         }
117         if (cc->dev->id.revision < 10) {
118                 tmp = chipco_read32(cc, SSB_CHIPCO_SLOWCLKCTL);
119                 tmp &= 0x7;
120                 if (tmp == 0)
121                         return SSB_CHIPCO_CLKSRC_LOPWROS;
122                 if (tmp == 1)
123                         return SSB_CHIPCO_CLKSRC_XTALOS;
124                 if (tmp == 2)
125                         return SSB_CHIPCO_CLKSRC_PCI;
126         }
127
128         return SSB_CHIPCO_CLKSRC_XTALOS;
129 }
130
131 /* Get maximum or minimum (depending on get_max flag) slowclock frequency. */
132 static int chipco_pctl_clockfreqlimit(struct ssb_chipcommon *cc, int get_max)
133 {
134         int uninitialized_var(limit);
135         enum ssb_clksrc clocksrc;
136         int divisor = 1;
137         u32 tmp;
138
139         clocksrc = chipco_pctl_get_slowclksrc(cc);
140         if (cc->dev->id.revision < 6) {
141                 switch (clocksrc) {
142                 case SSB_CHIPCO_CLKSRC_PCI:
143                         divisor = 64;
144                         break;
145                 case SSB_CHIPCO_CLKSRC_XTALOS:
146                         divisor = 32;
147                         break;
148                 default:
149                         SSB_WARN_ON(1);
150                 }
151         } else if (cc->dev->id.revision < 10) {
152                 switch (clocksrc) {
153                 case SSB_CHIPCO_CLKSRC_LOPWROS:
154                         break;
155                 case SSB_CHIPCO_CLKSRC_XTALOS:
156                 case SSB_CHIPCO_CLKSRC_PCI:
157                         tmp = chipco_read32(cc, SSB_CHIPCO_SLOWCLKCTL);
158                         divisor = (tmp >> 16) + 1;
159                         divisor *= 4;
160                         break;
161                 }
162         } else {
163                 tmp = chipco_read32(cc, SSB_CHIPCO_SYSCLKCTL);
164                 divisor = (tmp >> 16) + 1;
165                 divisor *= 4;
166         }
167
168         switch (clocksrc) {
169         case SSB_CHIPCO_CLKSRC_LOPWROS:
170                 if (get_max)
171                         limit = 43000;
172                 else
173                         limit = 25000;
174                 break;
175         case SSB_CHIPCO_CLKSRC_XTALOS:
176                 if (get_max)
177                         limit = 20200000;
178                 else
179                         limit = 19800000;
180                 break;
181         case SSB_CHIPCO_CLKSRC_PCI:
182                 if (get_max)
183                         limit = 34000000;
184                 else
185                         limit = 25000000;
186                 break;
187         }
188         limit /= divisor;
189
190         return limit;
191 }
192
193 static void chipco_powercontrol_init(struct ssb_chipcommon *cc)
194 {
195         struct ssb_bus *bus = cc->dev->bus;
196
197         if (bus->chip_id == 0x4321) {
198                 if (bus->chip_rev == 0)
199                         chipco_write32(cc, SSB_CHIPCO_CHIPCTL, 0x3A4);
200                 else if (bus->chip_rev == 1)
201                         chipco_write32(cc, SSB_CHIPCO_CHIPCTL, 0xA4);
202         }
203
204         if (!(cc->capabilities & SSB_CHIPCO_CAP_PCTL))
205                 return;
206
207         if (cc->dev->id.revision >= 10) {
208                 /* Set Idle Power clock rate to 1Mhz */
209                 chipco_write32(cc, SSB_CHIPCO_SYSCLKCTL,
210                                (chipco_read32(cc, SSB_CHIPCO_SYSCLKCTL) &
211                                 0x0000FFFF) | 0x00040000);
212         } else {
213                 int maxfreq;
214
215                 maxfreq = chipco_pctl_clockfreqlimit(cc, 1);
216                 chipco_write32(cc, SSB_CHIPCO_PLLONDELAY,
217                                (maxfreq * 150 + 999999) / 1000000);
218                 chipco_write32(cc, SSB_CHIPCO_FREFSELDELAY,
219                                (maxfreq * 15 + 999999) / 1000000);
220         }
221 }
222
223 static void calc_fast_powerup_delay(struct ssb_chipcommon *cc)
224 {
225         struct ssb_bus *bus = cc->dev->bus;
226         int minfreq;
227         unsigned int tmp;
228         u32 pll_on_delay;
229
230         if (bus->bustype != SSB_BUSTYPE_PCI)
231                 return;
232         if (!(cc->capabilities & SSB_CHIPCO_CAP_PCTL))
233                 return;
234
235         minfreq = chipco_pctl_clockfreqlimit(cc, 0);
236         pll_on_delay = chipco_read32(cc, SSB_CHIPCO_PLLONDELAY);
237         tmp = (((pll_on_delay + 2) * 1000000) + (minfreq - 1)) / minfreq;
238         SSB_WARN_ON(tmp & ~0xFFFF);
239
240         cc->fast_pwrup_delay = tmp;
241 }
242
243 void ssb_chipcommon_init(struct ssb_chipcommon *cc)
244 {
245         if (!cc->dev)
246                 return; /* We don't have a ChipCommon */
247         chipco_powercontrol_init(cc);
248         ssb_chipco_set_clockmode(cc, SSB_CLKMODE_FAST);
249         calc_fast_powerup_delay(cc);
250 }
251
252 void ssb_chipco_suspend(struct ssb_chipcommon *cc, pm_message_t state)
253 {
254         if (!cc->dev)
255                 return;
256         ssb_chipco_set_clockmode(cc, SSB_CLKMODE_SLOW);
257 }
258
259 void ssb_chipco_resume(struct ssb_chipcommon *cc)
260 {
261         if (!cc->dev)
262                 return;
263         chipco_powercontrol_init(cc);
264         ssb_chipco_set_clockmode(cc, SSB_CLKMODE_FAST);
265 }
266
267 /* Get the processor clock */
268 void ssb_chipco_get_clockcpu(struct ssb_chipcommon *cc,
269                              u32 *plltype, u32 *n, u32 *m)
270 {
271         *n = chipco_read32(cc, SSB_CHIPCO_CLOCK_N);
272         *plltype = (cc->capabilities & SSB_CHIPCO_CAP_PLLT);
273         switch (*plltype) {
274         case SSB_PLLTYPE_2:
275         case SSB_PLLTYPE_4:
276         case SSB_PLLTYPE_6:
277         case SSB_PLLTYPE_7:
278                 *m = chipco_read32(cc, SSB_CHIPCO_CLOCK_MIPS);
279                 break;
280         case SSB_PLLTYPE_3:
281                 /* 5350 uses m2 to control mips */
282                 *m = chipco_read32(cc, SSB_CHIPCO_CLOCK_M2);
283                 break;
284         default:
285                 *m = chipco_read32(cc, SSB_CHIPCO_CLOCK_SB);
286                 break;
287         }
288 }
289
290 /* Get the bus clock */
291 void ssb_chipco_get_clockcontrol(struct ssb_chipcommon *cc,
292                                  u32 *plltype, u32 *n, u32 *m)
293 {
294         *n = chipco_read32(cc, SSB_CHIPCO_CLOCK_N);
295         *plltype = (cc->capabilities & SSB_CHIPCO_CAP_PLLT);
296         switch (*plltype) {
297         case SSB_PLLTYPE_6: /* 100/200 or 120/240 only */
298                 *m = chipco_read32(cc, SSB_CHIPCO_CLOCK_MIPS);
299                 break;
300         case SSB_PLLTYPE_3: /* 25Mhz, 2 dividers */
301                 if (cc->dev->bus->chip_id != 0x5365) {
302                         *m = chipco_read32(cc, SSB_CHIPCO_CLOCK_M2);
303                         break;
304                 }
305                 /* Fallthough */
306         default:
307                 *m = chipco_read32(cc, SSB_CHIPCO_CLOCK_SB);
308         }
309 }
310
311 void ssb_chipco_timing_init(struct ssb_chipcommon *cc,
312                             unsigned long ns)
313 {
314         struct ssb_device *dev = cc->dev;
315         struct ssb_bus *bus = dev->bus;
316         u32 tmp;
317
318         /* set register for external IO to control LED. */
319         chipco_write32(cc, SSB_CHIPCO_PROG_CFG, 0x11);
320         tmp = DIV_ROUND_UP(10, ns) << SSB_PROG_WCNT_3_SHIFT;            /* Waitcount-3 = 10ns */
321         tmp |= DIV_ROUND_UP(40, ns) << SSB_PROG_WCNT_1_SHIFT;   /* Waitcount-1 = 40ns */
322         tmp |= DIV_ROUND_UP(240, ns);                           /* Waitcount-0 = 240ns */
323         chipco_write32(cc, SSB_CHIPCO_PROG_WAITCNT, tmp);       /* 0x01020a0c for a 100Mhz clock */
324
325         /* Set timing for the flash */
326         tmp = DIV_ROUND_UP(10, ns) << SSB_FLASH_WCNT_3_SHIFT;   /* Waitcount-3 = 10nS */
327         tmp |= DIV_ROUND_UP(10, ns) << SSB_FLASH_WCNT_1_SHIFT;  /* Waitcount-1 = 10nS */
328         tmp |= DIV_ROUND_UP(120, ns);                           /* Waitcount-0 = 120nS */
329         if ((bus->chip_id == 0x5365) ||
330             (dev->id.revision < 9))
331                 chipco_write32(cc, SSB_CHIPCO_FLASH_WAITCNT, tmp);
332         if ((bus->chip_id == 0x5365) ||
333             (dev->id.revision < 9) ||
334             ((bus->chip_id == 0x5350) && (bus->chip_rev == 0)))
335                 chipco_write32(cc, SSB_CHIPCO_PCMCIA_MEMWAIT, tmp);
336
337         if (bus->chip_id == 0x5350) {
338                 /* Enable EXTIF */
339                 tmp = DIV_ROUND_UP(10, ns) << SSB_PROG_WCNT_3_SHIFT;      /* Waitcount-3 = 10ns */
340                 tmp |= DIV_ROUND_UP(20, ns) << SSB_PROG_WCNT_2_SHIFT;  /* Waitcount-2 = 20ns */
341                 tmp |= DIV_ROUND_UP(100, ns) << SSB_PROG_WCNT_1_SHIFT; /* Waitcount-1 = 100ns */
342                 tmp |= DIV_ROUND_UP(120, ns);                     /* Waitcount-0 = 120ns */
343                 chipco_write32(cc, SSB_CHIPCO_PROG_WAITCNT, tmp); /* 0x01020a0c for a 100Mhz clock */
344         }
345 }
346
347 /* Set chip watchdog reset timer to fire in 'ticks' backplane cycles */
348 void ssb_chipco_watchdog_timer_set(struct ssb_chipcommon *cc, u32 ticks)
349 {
350         /* instant NMI */
351         chipco_write32(cc, SSB_CHIPCO_WATCHDOG, ticks);
352 }
353
354 u32 ssb_chipco_gpio_in(struct ssb_chipcommon *cc, u32 mask)
355 {
356         return chipco_read32(cc, SSB_CHIPCO_GPIOIN) & mask;
357 }
358
359 void ssb_chipco_gpio_out(struct ssb_chipcommon *cc, u32 mask, u32 value)
360 {
361         chipco_write32_masked(cc, SSB_CHIPCO_GPIOOUT, mask, value);
362 }
363
364 void ssb_chipco_gpio_outen(struct ssb_chipcommon *cc, u32 mask, u32 value)
365 {
366         chipco_write32_masked(cc, SSB_CHIPCO_GPIOOUTEN, mask, value);
367 }
368
369 #ifdef CONFIG_SSB_SERIAL
370 int ssb_chipco_serial_init(struct ssb_chipcommon *cc,
371                            struct ssb_serial_port *ports)
372 {
373         struct ssb_bus *bus = cc->dev->bus;
374         int nr_ports = 0;
375         u32 plltype;
376         unsigned int irq;
377         u32 baud_base, div;
378         u32 i, n;
379
380         plltype = (cc->capabilities & SSB_CHIPCO_CAP_PLLT);
381         irq = ssb_mips_irq(cc->dev);
382
383         if (plltype == SSB_PLLTYPE_1) {
384                 /* PLL clock */
385                 baud_base = ssb_calc_clock_rate(plltype,
386                                                 chipco_read32(cc, SSB_CHIPCO_CLOCK_N),
387                                                 chipco_read32(cc, SSB_CHIPCO_CLOCK_M2));
388                 div = 1;
389         } else {
390                 if (cc->dev->id.revision >= 11) {
391                         /* Fixed ALP clock */
392                         baud_base = 20000000;
393                         div = 1;
394                         /* Set the override bit so we don't divide it */
395                         chipco_write32(cc, SSB_CHIPCO_CORECTL,
396                                        SSB_CHIPCO_CORECTL_UARTCLK0);
397                 } else if (cc->dev->id.revision >= 3) {
398                         /* Internal backplane clock */
399                         baud_base = ssb_clockspeed(bus);
400                         div = chipco_read32(cc, SSB_CHIPCO_CLKDIV)
401                               & SSB_CHIPCO_CLKDIV_UART;
402                 } else {
403                         /* Fixed internal backplane clock */
404                         baud_base = 88000000;
405                         div = 48;
406                 }
407
408                 /* Clock source depends on strapping if UartClkOverride is unset */
409                 if ((cc->dev->id.revision > 0) &&
410                     !(chipco_read32(cc, SSB_CHIPCO_CORECTL) & SSB_CHIPCO_CORECTL_UARTCLK0)) {
411                         if ((cc->capabilities & SSB_CHIPCO_CAP_UARTCLK) ==
412                             SSB_CHIPCO_CAP_UARTCLK_INT) {
413                                 /* Internal divided backplane clock */
414                                 baud_base /= div;
415                         } else {
416                                 /* Assume external clock of 1.8432 MHz */
417                                 baud_base = 1843200;
418                         }
419                 }
420         }
421
422         /* Determine the registers of the UARTs */
423         n = (cc->capabilities & SSB_CHIPCO_CAP_NRUART);
424         for (i = 0; i < n; i++) {
425                 void __iomem *cc_mmio;
426                 void __iomem *uart_regs;
427
428                 cc_mmio = cc->dev->bus->mmio + (cc->dev->core_index * SSB_CORE_SIZE);
429                 uart_regs = cc_mmio + SSB_CHIPCO_UART0_DATA;
430                 /* Offset changed at after rev 0 */
431                 if (cc->dev->id.revision == 0)
432                         uart_regs += (i * 8);
433                 else
434                         uart_regs += (i * 256);
435
436                 nr_ports++;
437                 ports[i].regs = uart_regs;
438                 ports[i].irq = irq;
439                 ports[i].baud_base = baud_base;
440                 ports[i].reg_shift = 0;
441         }
442
443         return nr_ports;
444 }
445 #endif /* CONFIG_SSB_SERIAL */