git.oblomov.eu Git - linux-2.6/blob - drivers/usb/serial/spcp8x5.c

   1 /*
   2  * spcp8x5 USB to serial adaptor driver
   3  *
   4  * Copyright (C) 2006 Linxb (xubin.lin@worldplus.com.cn)
   5  * Copyright (C) 2006 S1 Corp.
   6  *
   7  * Original driver for 2.6.10 pl2303 driver by
   8  *   Greg Kroah-Hartman (greg@kroah.com)
   9  * Changes for 2.6.20 by Harald Klein <hari@vt100.at>
  10  *
  11  *      This program is free software; you can redistribute it and/or modify
  12  *      it under the terms of the GNU General Public License as published by
  13  *      the Free Software Foundation; either version 2 of the License, or
  14  *      (at your option) any later version.
  15  *
  16  *
  17  */
  18 #include <linux/kernel.h>
  19 #include <linux/errno.h>
  20 #include <linux/init.h>
  21 #include <linux/slab.h>
  22 #include <linux/tty.h>
  23 #include <linux/tty_driver.h>
  24 #include <linux/tty_flip.h>
  25 #include <linux/module.h>
  26 #include <linux/spinlock.h>
  27 #include <linux/usb.h>
  28 #include <linux/usb/serial.h>
  29
  30
  31 /* Version Information */
  32 #define DRIVER_VERSION  "v0.04"
  33 #define DRIVER_DESC     "SPCP8x5 USB to serial adaptor driver"
  34
  35 static int debug;
  36
  37 #define SPCP8x5_007_VID         0x04FC
  38 #define SPCP8x5_007_PID         0x0201
  39 #define SPCP8x5_008_VID         0x04fc
  40 #define SPCP8x5_008_PID         0x0235
  41 #define SPCP8x5_PHILIPS_VID     0x0471
  42 #define SPCP8x5_PHILIPS_PID     0x081e
  43 #define SPCP8x5_INTERMATIC_VID  0x04FC
  44 #define SPCP8x5_INTERMATIC_PID  0x0204
  45 #define SPCP8x5_835_VID         0x04fc
  46 #define SPCP8x5_835_PID         0x0231
  47
  48 static struct usb_device_id id_table [] = {
  49         { USB_DEVICE(SPCP8x5_PHILIPS_VID , SPCP8x5_PHILIPS_PID)},
  50         { USB_DEVICE(SPCP8x5_INTERMATIC_VID, SPCP8x5_INTERMATIC_PID)},
  51         { USB_DEVICE(SPCP8x5_835_VID, SPCP8x5_835_PID)},
  52         { USB_DEVICE(SPCP8x5_008_VID, SPCP8x5_008_PID)},
  53         { USB_DEVICE(SPCP8x5_007_VID, SPCP8x5_007_PID)},
  54         { }                                     /* Terminating entry */
  55 };
  56 MODULE_DEVICE_TABLE(usb, id_table);
  57
  58 struct spcp8x5_usb_ctrl_arg {
  59         u8      type;
  60         u8      cmd;
  61         u8      cmd_type;
  62         u16     value;
  63         u16     index;
  64         u16     length;
  65 };
  66
  67 /* wait 30s before close */
  68 #define SPCP8x5_CLOSING_WAIT    (30*HZ)
  69
  70 #define SPCP8x5_BUF_SIZE        1024
  71
  72
  73 /* spcp8x5 spec register define */
  74 #define MCR_CONTROL_LINE_RTS            0x02
  75 #define MCR_CONTROL_LINE_DTR            0x01
  76 #define MCR_DTR                         0x01
  77 #define MCR_RTS                         0x02
  78
  79 #define MSR_STATUS_LINE_DCD             0x80
  80 #define MSR_STATUS_LINE_RI              0x40
  81 #define MSR_STATUS_LINE_DSR             0x20
  82 #define MSR_STATUS_LINE_CTS             0x10
  83
  84 /* verdor command here , we should define myself */
  85 #define SET_DEFAULT                     0x40
  86 #define SET_DEFAULT_TYPE                0x20
  87
  88 #define SET_UART_FORMAT                 0x40
  89 #define SET_UART_FORMAT_TYPE            0x21
  90 #define SET_UART_FORMAT_SIZE_5          0x00
  91 #define SET_UART_FORMAT_SIZE_6          0x01
  92 #define SET_UART_FORMAT_SIZE_7          0x02
  93 #define SET_UART_FORMAT_SIZE_8          0x03
  94 #define SET_UART_FORMAT_STOP_1          0x00
  95 #define SET_UART_FORMAT_STOP_2          0x04
  96 #define SET_UART_FORMAT_PAR_NONE        0x00
  97 #define SET_UART_FORMAT_PAR_ODD         0x10
  98 #define SET_UART_FORMAT_PAR_EVEN        0x30
  99 #define SET_UART_FORMAT_PAR_MASK        0xD0
 100 #define SET_UART_FORMAT_PAR_SPACE       0x90
 101
 102 #define GET_UART_STATUS_TYPE            0xc0
 103 #define GET_UART_STATUS                 0x22
 104 #define GET_UART_STATUS_MSR             0x06
 105
 106 #define SET_UART_STATUS                 0x40
 107 #define SET_UART_STATUS_TYPE            0x23
 108 #define SET_UART_STATUS_MCR             0x0004
 109 #define SET_UART_STATUS_MCR_DTR         0x01
 110 #define SET_UART_STATUS_MCR_RTS         0x02
 111 #define SET_UART_STATUS_MCR_LOOP        0x10
 112
 113 #define SET_WORKING_MODE                0x40
 114 #define SET_WORKING_MODE_TYPE           0x24
 115 #define SET_WORKING_MODE_U2C            0x00
 116 #define SET_WORKING_MODE_RS485          0x01
 117 #define SET_WORKING_MODE_PDMA           0x02
 118 #define SET_WORKING_MODE_SPP            0x03
 119
 120 #define SET_FLOWCTL_CHAR                0x40
 121 #define SET_FLOWCTL_CHAR_TYPE           0x25
 122
 123 #define GET_VERSION                     0xc0
 124 #define GET_VERSION_TYPE                0x26
 125
 126 #define SET_REGISTER                    0x40
 127 #define SET_REGISTER_TYPE               0x27
 128
 129 #define GET_REGISTER                    0xc0
 130 #define GET_REGISTER_TYPE               0x28
 131
 132 #define SET_RAM                         0x40
 133 #define SET_RAM_TYPE                    0x31
 134
 135 #define GET_RAM                         0xc0
 136 #define GET_RAM_TYPE                    0x32
 137
 138 /* how come ??? */
 139 #define UART_STATE                      0x08
 140 #define UART_STATE_TRANSIENT_MASK       0x74
 141 #define UART_DCD                        0x01
 142 #define UART_DSR                        0x02
 143 #define UART_BREAK_ERROR                0x04
 144 #define UART_RING                       0x08
 145 #define UART_FRAME_ERROR                0x10
 146 #define UART_PARITY_ERROR               0x20
 147 #define UART_OVERRUN_ERROR              0x40
 148 #define UART_CTS                        0x80
 149
 150 enum spcp8x5_type {
 151         SPCP825_007_TYPE,
 152         SPCP825_008_TYPE,
 153         SPCP825_PHILIP_TYPE,
 154         SPCP825_INTERMATIC_TYPE,
 155         SPCP835_TYPE,
 156 };
 157
 158 /* 1st in 1st out buffer 4 driver */
 159 struct ringbuf {
 160         unsigned int    buf_size;
 161         char            *buf_buf;
 162         char            *buf_get;
 163         char            *buf_put;
 164 };
 165
 166 /* alloc the ring buf and alloc the buffer itself */
 167 static inline struct ringbuf *alloc_ringbuf(unsigned int size)
 168 {
 169         struct ringbuf *pb;
 170
 171         if (size == 0)
 172                 return NULL;
 173
 174         pb = kmalloc(sizeof(*pb), GFP_KERNEL);
 175         if (pb == NULL)
 176                 return NULL;
 177
 178         pb->buf_buf = kmalloc(size, GFP_KERNEL);
 179         if (pb->buf_buf == NULL) {
 180                 kfree(pb);
 181                 return NULL;
 182         }
 183
 184         pb->buf_size = size;
 185         pb->buf_get = pb->buf_put = pb->buf_buf;
 186
 187         return pb;
 188 }
 189
 190 /* free the ring buf and the buffer itself */
 191 static inline void free_ringbuf(struct ringbuf *pb)
 192 {
 193         if (pb != NULL) {
 194                 kfree(pb->buf_buf);
 195                 kfree(pb);
 196         }
 197 }
 198
 199 /* clear pipo , juest repoint the pointer here */
 200 static inline void clear_ringbuf(struct ringbuf *pb)
 201 {
 202         if (pb != NULL)
 203                 pb->buf_get = pb->buf_put;
 204 }
 205
 206 /* get the number of data in the pipo */
 207 static inline unsigned int ringbuf_avail_data(struct ringbuf *pb)
 208 {
 209         if (pb == NULL)
 210                 return 0;
 211         return (pb->buf_size + pb->buf_put - pb->buf_get) % pb->buf_size;
 212 }
 213
 214 /* get the number of space in the pipo */
 215 static inline unsigned int ringbuf_avail_space(struct ringbuf *pb)
 216 {
 217         if (pb == NULL)
 218                 return 0;
 219         return (pb->buf_size + pb->buf_get - pb->buf_put - 1) % pb->buf_size;
 220 }
 221
 222 /* put count data into pipo */
 223 static unsigned int put_ringbuf(struct ringbuf *pb, const char *buf,
 224                                 unsigned int count)
 225 {
 226         unsigned int len;
 227
 228         if (pb == NULL)
 229                 return 0;
 230
 231         len  = ringbuf_avail_space(pb);
 232         if (count > len)
 233                 count = len;
 234
 235         if (count == 0)
 236                 return 0;
 237
 238         len = pb->buf_buf + pb->buf_size - pb->buf_put;
 239         if (count > len) {
 240                 memcpy(pb->buf_put, buf, len);
 241                 memcpy(pb->buf_buf, buf+len, count - len);
 242                 pb->buf_put = pb->buf_buf + count - len;
 243         } else {
 244                 memcpy(pb->buf_put, buf, count);
 245                 if (count < len)
 246                         pb->buf_put += count;
 247                 else /* count == len */
 248                         pb->buf_put = pb->buf_buf;
 249         }
 250         return count;
 251 }
 252
 253 /* get count data from pipo */
 254 static unsigned int get_ringbuf(struct ringbuf *pb, char *buf,
 255                                 unsigned int count)
 256 {
 257         unsigned int len;
 258
 259         if (pb == NULL || buf == NULL)
 260                 return 0;
 261
 262         len = ringbuf_avail_data(pb);
 263         if (count > len)
 264                 count = len;
 265
 266         if (count == 0)
 267                 return 0;
 268
 269         len = pb->buf_buf + pb->buf_size - pb->buf_get;
 270         if (count > len) {
 271                 memcpy(buf, pb->buf_get, len);
 272                 memcpy(buf+len, pb->buf_buf, count - len);
 273                 pb->buf_get = pb->buf_buf + count - len;
 274         } else {
 275                 memcpy(buf, pb->buf_get, count);
 276                 if (count < len)
 277                         pb->buf_get += count;
 278                 else /* count == len */
 279                         pb->buf_get = pb->buf_buf;
 280         }
 281
 282         return count;
 283 }
 284
 285 static struct usb_driver spcp8x5_driver = {
 286         .name =                 "spcp8x5",
 287         .probe =                usb_serial_probe,
 288         .disconnect =           usb_serial_disconnect,
 289         .id_table =             id_table,
 290         .no_dynamic_id =        1,
 291 };
 292
 293
 294 struct spcp8x5_private {
 295         spinlock_t      lock;
 296         struct ringbuf  *buf;
 297         int             write_urb_in_use;
 298         enum spcp8x5_type       type;
 299         wait_queue_head_t       delta_msr_wait;
 300         u8                      line_control;
 301         u8                      line_status;
 302         u8                      termios_initialized;
 303 };
 304
 305 /* desc : when device plug in,this function would be called.
 306  * thanks to usb_serial subsystem,then do almost every things for us. And what
 307  * we should do just alloc the buffer */
 308 static int spcp8x5_startup(struct usb_serial *serial)
 309 {
 310         struct spcp8x5_private *priv;
 311         int i;
 312         enum spcp8x5_type type = SPCP825_007_TYPE;
 313         u16 product = le16_to_cpu(serial->dev->descriptor.idProduct);
 314
 315         if (product == 0x0201)
 316                 type = SPCP825_007_TYPE;
 317         else if (product == 0x0231)
 318                 type = SPCP835_TYPE;
 319         else if (product == 0x0235)
 320                 type = SPCP825_008_TYPE;
 321         else if (product == 0x0204)
 322                 type = SPCP825_INTERMATIC_TYPE;
 323         else if (product == 0x0471 &&
 324                  serial->dev->descriptor.idVendor == cpu_to_le16(0x081e))
 325                 type = SPCP825_PHILIP_TYPE;
 326         dev_dbg(&serial->dev->dev, "device type = %d\n", (int)type);
 327
 328         for (i = 0; i < serial->num_ports; ++i) {
 329                 priv = kzalloc(sizeof(struct spcp8x5_private), GFP_KERNEL);
 330                 if (!priv)
 331                         goto cleanup;
 332
 333                 spin_lock_init(&priv->lock);
 334                 priv->buf = alloc_ringbuf(SPCP8x5_BUF_SIZE);
 335                 if (priv->buf == NULL)
 336                         goto cleanup2;
 337
 338                 init_waitqueue_head(&priv->delta_msr_wait);
 339                 priv->type = type;
 340                 usb_set_serial_port_data(serial->port[i] , priv);
 341
 342         }
 343
 344         return 0;
 345
 346 cleanup2:
 347         kfree(priv);
 348 cleanup:
 349         for (--i; i >= 0; --i) {
 350                 priv = usb_get_serial_port_data(serial->port[i]);
 351                 free_ringbuf(priv->buf);
 352                 kfree(priv);
 353                 usb_set_serial_port_data(serial->port[i] , NULL);
 354         }
 355         return -ENOMEM;
 356 }
 357
 358 /* call when the device plug out. free all the memory alloced by probe */
 359 static void spcp8x5_shutdown(struct usb_serial *serial)
 360 {
 361         int i;
 362         struct spcp8x5_private *priv;
 363
 364         for (i = 0; i < serial->num_ports; i++) {
 365                 priv = usb_get_serial_port_data(serial->port[i]);
 366                 if (priv) {
 367                         free_ringbuf(priv->buf);
 368                         kfree(priv);
 369                         usb_set_serial_port_data(serial->port[i] , NULL);
 370                 }
 371         }
 372 }
 373
 374 /* set the modem control line of the device.
 375  * NOTE spcp825-007 not supported this */
 376 static int spcp8x5_set_ctrlLine(struct usb_device *dev, u8 value,
 377                                 enum spcp8x5_type type)
 378 {
 379         int retval;
 380         u8 mcr = 0 ;
 381
 382         if (type == SPCP825_007_TYPE)
 383                 return -EPERM;
 384
 385         mcr = (unsigned short)value;
 386         retval = usb_control_msg(dev, usb_sndctrlpipe(dev, 0),
 387                                  SET_UART_STATUS_TYPE, SET_UART_STATUS,
 388                                  mcr, 0x04, NULL, 0, 100);
 389         if (retval != 0)
 390                 dev_dbg(&dev->dev, "usb_control_msg return %#x\n", retval);
 391         return retval;
 392 }
 393
 394 /* get the modem status register of the device
 395  * NOTE spcp825-007 not supported this */
 396 static int spcp8x5_get_msr(struct usb_device *dev, u8 *status,
 397                            enum spcp8x5_type type)
 398 {
 399         u8 *status_buffer;
 400         int ret;
 401
 402         /* I return Permited not support here but seem inval device
 403          * is more fix */
 404         if (type == SPCP825_007_TYPE)
 405                 return -EPERM;
 406         if (status == NULL)
 407                 return -EINVAL;
 408
 409         status_buffer = kmalloc(1, GFP_KERNEL);
 410         if (!status_buffer)
 411                 return -ENOMEM;
 412         status_buffer[0] = status[0];
 413
 414         ret = usb_control_msg(dev, usb_rcvctrlpipe(dev, 0),
 415                               GET_UART_STATUS, GET_UART_STATUS_TYPE,
 416                               0, GET_UART_STATUS_MSR, status_buffer, 1, 100);
 417         if (ret < 0)
 418                 dev_dbg(&dev->dev, "Get MSR = 0x%p failed (error = %d)",
 419                         status_buffer, ret);
 420
 421         dev_dbg(&dev->dev, "0xc0:0x22:0:6  %d - 0x%p ", ret, status_buffer);
 422         status[0] = status_buffer[0];
 423         kfree(status_buffer);
 424
 425         return ret;
 426 }
 427
 428 /* select the work mode.
 429  * NOTE this function not supported by spcp825-007 */
 430 static void spcp8x5_set_workMode(struct usb_device *dev, u16 value,
 431                                  u16 index, enum spcp8x5_type type)
 432 {
 433         int ret;
 434
 435         /* I return Permited not support here but seem inval device
 436          * is more fix */
 437         if (type == SPCP825_007_TYPE)
 438                 return;
 439
 440         ret = usb_control_msg(dev, usb_sndctrlpipe(dev, 0),
 441                               SET_WORKING_MODE_TYPE, SET_WORKING_MODE,
 442                               value, index, NULL, 0, 100);
 443         dev_dbg(&dev->dev, "value = %#x , index = %#x\n", value, index);
 444         if (ret < 0)
 445                 dev_dbg(&dev->dev,
 446                         "RTSCTS usb_control_msg(enable flowctrl) = %d\n", ret);
 447 }
 448
 449 /* close the serial port. We should wait for data sending to device 1st and
 450  * then kill all urb. */
 451 static void spcp8x5_close(struct tty_struct *tty,
 452                         struct usb_serial_port *port, struct file *filp)
 453 {
 454         struct spcp8x5_private *priv = usb_get_serial_port_data(port);
 455         unsigned long flags;
 456         unsigned int c_cflag;
 457         int bps;
 458         long timeout;
 459         wait_queue_t wait;
 460         int result;
 461
 462         dbg("%s - port %d", __func__, port->number);
 463
 464         /* wait for data to drain from the buffer */
 465         spin_lock_irqsave(&priv->lock, flags);
 466         timeout = SPCP8x5_CLOSING_WAIT;
 467         init_waitqueue_entry(&wait, current);
 468         add_wait_queue(&tty->write_wait, &wait);
 469         for (;;) {
 470                 set_current_state(TASK_INTERRUPTIBLE);
 471                 if (ringbuf_avail_data(priv->buf) == 0 ||
 472                     timeout == 0 || signal_pending(current))
 473                         break;
 474                 spin_unlock_irqrestore(&priv->lock, flags);
 475                 timeout = schedule_timeout(timeout);
 476                 spin_lock_irqsave(&priv->lock, flags);
 477         }
 478         set_current_state(TASK_RUNNING);
 479         remove_wait_queue(&tty->write_wait, &wait);
 480
 481         /* clear out any remaining data in the buffer */
 482         clear_ringbuf(priv->buf);
 483         spin_unlock_irqrestore(&priv->lock, flags);
 484
 485         /* wait for characters to drain from the device (this is long enough
 486          * for the entire all byte spcp8x5 hardware buffer to drain with no
 487          * flow control for data rates of 1200 bps or more, for lower rates we
 488          * should really know how much data is in the buffer to compute a delay
 489          * that is not unnecessarily long) */
 490         bps = tty_get_baud_rate(tty);
 491         if (bps > 1200)
 492                 timeout = max((HZ*2560) / bps, HZ/10);
 493         else
 494                 timeout = 2*HZ;
 495         set_current_state(TASK_INTERRUPTIBLE);
 496         schedule_timeout(timeout);
 497
 498         /* clear control lines */
 499         if (tty) {
 500                 c_cflag = tty->termios->c_cflag;
 501                 if (c_cflag & HUPCL) {
 502                         spin_lock_irqsave(&priv->lock, flags);
 503                         priv->line_control = 0;
 504                         spin_unlock_irqrestore(&priv->lock, flags);
 505                         spcp8x5_set_ctrlLine(port->serial->dev, 0 , priv->type);
 506                 }
 507         }
 508
 509         /* kill urb */
 510         if (port->write_urb != NULL) {
 511                 result = usb_unlink_urb(port->write_urb);
 512                 if (result)
 513                         dev_dbg(&port->dev,
 514                                 "usb_unlink_urb(write_urb) = %d\n", result);
 515         }
 516         result = usb_unlink_urb(port->read_urb);
 517         if (result)
 518                 dev_dbg(&port->dev, "usb_unlink_urb(read_urb) = %d\n", result);
 519 }
 520
 521 /* set the serial param for transfer. we should check if we really need to
 522  * transfer. if we set flow control we should do this too. */
 523 static void spcp8x5_set_termios(struct tty_struct *tty,
 524                 struct usb_serial_port *port, struct ktermios *old_termios)
 525 {
 526         struct usb_serial *serial = port->serial;
 527         struct spcp8x5_private *priv = usb_get_serial_port_data(port);
 528         unsigned long flags;
 529         unsigned int cflag = tty->termios->c_cflag;
 530         unsigned int old_cflag = old_termios->c_cflag;
 531         unsigned short uartdata;
 532         unsigned char buf[2] = {0, 0};
 533         int baud;
 534         int i;
 535         u8 control;
 536
 537         /* for the 1st time call this function */
 538         spin_lock_irqsave(&priv->lock, flags);
 539         if (!priv->termios_initialized) {
 540                 *(tty->termios) = tty_std_termios;
 541                 tty->termios->c_cflag = B115200 | CS8 | CREAD | HUPCL | CLOCAL;
 542                 tty->termios->c_ispeed = 115200;
 543                 tty->termios->c_ospeed = 115200;
 544                 priv->termios_initialized = 1;
 545         }
 546         spin_unlock_irqrestore(&priv->lock, flags);
 547
 548         /* check that they really want us to change something */
 549         if (!tty_termios_hw_change(tty->termios, old_termios))
 550                 return;
 551
 552         /* set DTR/RTS active */
 553         spin_lock_irqsave(&priv->lock, flags);
 554         control = priv->line_control;
 555         if ((old_cflag & CBAUD) == B0) {
 556                 priv->line_control |= MCR_DTR;
 557                 if (!(old_cflag & CRTSCTS))
 558                         priv->line_control |= MCR_RTS;
 559         }
 560         if (control != priv->line_control) {
 561                 control = priv->line_control;
 562                 spin_unlock_irqrestore(&priv->lock, flags);
 563                 spcp8x5_set_ctrlLine(serial->dev, control , priv->type);
 564         } else {
 565                 spin_unlock_irqrestore(&priv->lock, flags);
 566         }
 567
 568         /* Set Baud Rate */
 569         baud = tty_get_baud_rate(tty);;
 570         switch (baud) {
 571         case 300:       buf[0] = 0x00;  break;
 572         case 600:       buf[0] = 0x01;  break;
 573         case 1200:      buf[0] = 0x02;  break;
 574         case 2400:      buf[0] = 0x03;  break;
 575         case 4800:      buf[0] = 0x04;  break;
 576         case 9600:      buf[0] = 0x05;  break;
 577         case 19200:     buf[0] = 0x07;  break;
 578         case 38400:     buf[0] = 0x09;  break;
 579         case 57600:     buf[0] = 0x0a;  break;
 580         case 115200:    buf[0] = 0x0b;  break;
 581         case 230400:    buf[0] = 0x0c;  break;
 582         case 460800:    buf[0] = 0x0d;  break;
 583         case 921600:    buf[0] = 0x0e;  break;
 584 /*      case 1200000:   buf[0] = 0x0f;  break; */
 585 /*      case 2400000:   buf[0] = 0x10;  break; */
 586         case 3000000:   buf[0] = 0x11;  break;
 587 /*      case 6000000:   buf[0] = 0x12;  break; */
 588         case 0:
 589         case 1000000:
 590                         buf[0] = 0x0b;  break;
 591         default:
 592                 dev_err(&port->dev, "spcp825 driver does not support the "
 593                         "baudrate requested, using default of 9600.\n");
 594         }
 595
 596         /* Set Data Length : 00:5bit, 01:6bit, 10:7bit, 11:8bit */
 597         if (cflag & CSIZE) {
 598                 switch (cflag & CSIZE) {
 599                 case CS5:
 600                         buf[1] |= SET_UART_FORMAT_SIZE_5;
 601                         break;
 602                 case CS6:
 603                         buf[1] |= SET_UART_FORMAT_SIZE_6;
 604                         break;
 605                 case CS7:
 606                         buf[1] |= SET_UART_FORMAT_SIZE_7;
 607                         break;
 608                 default:
 609                 case CS8:
 610                         buf[1] |= SET_UART_FORMAT_SIZE_8;
 611                         break;
 612                 }
 613         }
 614
 615         /* Set Stop bit2 : 0:1bit 1:2bit */
 616         buf[1] |= (cflag & CSTOPB) ? SET_UART_FORMAT_STOP_2 :
 617                                      SET_UART_FORMAT_STOP_1;
 618
 619         /* Set Parity bit3-4 01:Odd 11:Even */
 620         if (cflag & PARENB) {
 621                 buf[1] |= (cflag & PARODD) ?
 622                 SET_UART_FORMAT_PAR_ODD : SET_UART_FORMAT_PAR_EVEN ;
 623         } else
 624                 buf[1] |= SET_UART_FORMAT_PAR_NONE;
 625
 626         uartdata = buf[0] | buf[1]<<8;
 627
 628         i = usb_control_msg(serial->dev, usb_sndctrlpipe(serial->dev, 0),
 629                             SET_UART_FORMAT_TYPE, SET_UART_FORMAT,
 630                             uartdata, 0, NULL, 0, 100);
 631         if (i < 0)
 632                 dev_err(&port->dev, "Set UART format %#x failed (error = %d)\n",
 633                         uartdata, i);
 634         dbg("0x21:0x40:0:0  %d\n", i);
 635
 636         if (cflag & CRTSCTS) {
 637                 /* enable hardware flow control */
 638                 spcp8x5_set_workMode(serial->dev, 0x000a,
 639                                      SET_WORKING_MODE_U2C, priv->type);
 640         }
 641         return;
 642 }
 643
 644 /* open the serial port. do some usb system call. set termios and get the line
 645  * status of the device. then submit the read urb */
 646 static int spcp8x5_open(struct tty_struct *tty,
 647                         struct usb_serial_port *port, struct file *filp)
 648 {
 649         struct ktermios tmp_termios;
 650         struct usb_serial *serial = port->serial;
 651         struct spcp8x5_private *priv = usb_get_serial_port_data(port);
 652         int ret;
 653         unsigned long flags;
 654         u8 status = 0x30;
 655         /* status 0x30 means DSR and CTS = 1 other CDC RI and delta = 0 */
 656
 657         dbg("%s -  port %d", __func__, port->number);
 658
 659         usb_clear_halt(serial->dev, port->write_urb->pipe);
 660         usb_clear_halt(serial->dev, port->read_urb->pipe);
 661
 662         ret = usb_control_msg(serial->dev, usb_sndctrlpipe(serial->dev, 0),
 663                               0x09, 0x00,
 664                               0x01, 0x00, NULL, 0x00, 100);
 665         if (ret)
 666                 return ret;
 667
 668         spin_lock_irqsave(&priv->lock, flags);
 669         if (tty && (tty->termios->c_cflag & CBAUD))
 670                 priv->line_control = MCR_DTR | MCR_RTS;
 671         else
 672                 priv->line_control = 0;
 673         spin_unlock_irqrestore(&priv->lock, flags);
 674
 675         spcp8x5_set_ctrlLine(serial->dev, priv->line_control , priv->type);
 676
 677         /* Setup termios */
 678         if (tty)
 679                 spcp8x5_set_termios(tty, port, &tmp_termios);
 680
 681         spcp8x5_get_msr(serial->dev, &status, priv->type);
 682
 683         /* may be we should update uart status here but now we did not do */
 684         spin_lock_irqsave(&priv->lock, flags);
 685         priv->line_status = status & 0xf0 ;
 686         spin_unlock_irqrestore(&priv->lock, flags);
 687
 688         /* FIXME: need to assert RTS and DTR if CRTSCTS off */
 689
 690         dbg("%s - submitting read urb", __func__);
 691         port->read_urb->dev = serial->dev;
 692         ret = usb_submit_urb(port->read_urb, GFP_KERNEL);
 693         if (ret) {
 694                 spcp8x5_close(tty, port, NULL);
 695                 return -EPROTO;
 696         }
 697         return 0;
 698 }
 699
 700 /* bulk read call back function. check the status of the urb. if transfer
 701  * failed return. then update the status and the tty send data to tty subsys.
 702  * submit urb again.
 703  */
 704 static void spcp8x5_read_bulk_callback(struct urb *urb)
 705 {
 706         struct usb_serial_port *port = urb->context;
 707         struct spcp8x5_private *priv = usb_get_serial_port_data(port);
 708         struct tty_struct *tty;
 709         unsigned char *data = urb->transfer_buffer;
 710         unsigned long flags;
 711         int i;
 712         int result;
 713         u8 status = 0;
 714         char tty_flag;
 715
 716         dev_dbg(&port->dev, "start, urb->status = %d, "
 717                 "urb->actual_length = %d\n,", urb->status, urb->actual_length);
 718
 719         /* check the urb status */
 720         if (urb->status) {
 721                 if (!port->port.count)
 722                         return;
 723                 if (urb->status == -EPROTO) {
 724                         /* spcp8x5 mysteriously fails with -EPROTO */
 725                         /* reschedule the read */
 726                         urb->status = 0;
 727                         urb->dev = port->serial->dev;
 728                         result = usb_submit_urb(urb , GFP_ATOMIC);
 729                         if (result)
 730                                 dev_dbg(&port->dev,
 731                                         "failed submitting read urb %d\n",
 732                                         result);
 733                         return;
 734                 }
 735                 dev_dbg(&port->dev, "unable to handle the error, exiting.\n");
 736                 return;
 737         }
 738
 739         /* get tty_flag from status */
 740         tty_flag = TTY_NORMAL;
 741
 742         spin_lock_irqsave(&priv->lock, flags);
 743         status = priv->line_status;
 744         priv->line_status &= ~UART_STATE_TRANSIENT_MASK;
 745         spin_unlock_irqrestore(&priv->lock, flags);
 746         /* wake up the wait for termios */
 747         wake_up_interruptible(&priv->delta_msr_wait);
 748
 749         /* break takes precedence over parity, which takes precedence over
 750          * framing errors */
 751         if (status & UART_BREAK_ERROR)
 752                 tty_flag = TTY_BREAK;
 753         else if (status & UART_PARITY_ERROR)
 754                 tty_flag = TTY_PARITY;
 755         else if (status & UART_FRAME_ERROR)
 756                 tty_flag = TTY_FRAME;
 757         dev_dbg(&port->dev, "tty_flag = %d\n", tty_flag);
 758
 759         tty = tty_port_tty_get(&port->port);
 760         if (tty && urb->actual_length) {
 761                 tty_buffer_request_room(tty, urb->actual_length + 1);
 762                 /* overrun is special, not associated with a char */
 763                 if (status & UART_OVERRUN_ERROR)
 764                         tty_insert_flip_char(tty, 0, TTY_OVERRUN);
 765                 for (i = 0; i < urb->actual_length; ++i)
 766                         tty_insert_flip_char(tty, data[i], tty_flag);
 767                 tty_flip_buffer_push(tty);
 768         }
 769         tty_kref_put(tty);
 770
 771         /* Schedule the next read _if_ we are still open */
 772         if (port->port.count) {
 773                 urb->dev = port->serial->dev;
 774                 result = usb_submit_urb(urb , GFP_ATOMIC);
 775                 if (result)
 776                         dev_dbg(&port->dev, "failed submitting read urb %d\n",
 777                                 result);
 778         }
 779
 780         return;
 781 }
 782
 783 /* get data from ring buffer and then write to usb bus */
 784 static void spcp8x5_send(struct usb_serial_port *port)
 785 {
 786         int count, result;
 787         struct spcp8x5_private *priv = usb_get_serial_port_data(port);
 788         unsigned long flags;
 789
 790         spin_lock_irqsave(&priv->lock, flags);
 791
 792         if (priv->write_urb_in_use) {
 793                 dev_dbg(&port->dev, "write urb still used\n");
 794                 spin_unlock_irqrestore(&priv->lock, flags);
 795                 return;
 796         }
 797
 798         /* send the 1st urb for writting */
 799         memset(port->write_urb->transfer_buffer , 0x00 , port->bulk_out_size);
 800         count = get_ringbuf(priv->buf, port->write_urb->transfer_buffer,
 801                 port->bulk_out_size);
 802
 803         if (count == 0) {
 804                 spin_unlock_irqrestore(&priv->lock, flags);
 805                 return;
 806         }
 807
 808         /* update the urb status */
 809         priv->write_urb_in_use = 1;
 810
 811         spin_unlock_irqrestore(&priv->lock, flags);
 812
 813         port->write_urb->transfer_buffer_length = count;
 814         port->write_urb->dev = port->serial->dev;
 815
 816         result = usb_submit_urb(port->write_urb, GFP_ATOMIC);
 817         if (result) {
 818                 dev_dbg(&port->dev, "failed submitting write urb, error %d\n",
 819                         result);
 820                 priv->write_urb_in_use = 0;
 821                 /* TODO: reschedule spcp8x5_send */
 822         }
 823
 824
 825         schedule_work(&port->work);
 826 }
 827
 828 /* this is the call back function for write urb. NOTE we should not sleep in
 829  * this routine. check the urb return code and then submit the write urb again
 830  * to hold the write loop */
 831 static void spcp8x5_write_bulk_callback(struct urb *urb)
 832 {
 833         struct usb_serial_port *port = urb->context;
 834         struct spcp8x5_private *priv = usb_get_serial_port_data(port);
 835         int result;
 836
 837         switch (urb->status) {
 838         case 0:
 839                 /* success */
 840                 break;
 841         case -ECONNRESET:
 842         case -ENOENT:
 843         case -ESHUTDOWN:
 844                 /* this urb is terminated, clean up */
 845                 dev_dbg(&port->dev, "urb shutting down with status: %d\n",
 846                         urb->status);
 847                 priv->write_urb_in_use = 0;
 848                 return;
 849         default:
 850                 /* error in the urb, so we have to resubmit it */
 851                 dbg("%s - Overflow in write", __func__);
 852                 dbg("%s - nonzero write bulk status received: %d",
 853                         __func__, urb->status);
 854                 port->write_urb->transfer_buffer_length = 1;
 855                 port->write_urb->dev = port->serial->dev;
 856                 result = usb_submit_urb(port->write_urb, GFP_ATOMIC);
 857                 if (result)
 858                         dev_dbg(&port->dev,
 859                                 "failed resubmitting write urb %d\n", result);
 860                 else
 861                         return;
 862         }
 863
 864         priv->write_urb_in_use = 0;
 865
 866         /* send any buffered data */
 867         spcp8x5_send(port);
 868 }
 869
 870 /* write data to ring buffer. and then start the write transfer */
 871 static int spcp8x5_write(struct tty_struct *tty, struct usb_serial_port *port,
 872                          const unsigned char *buf, int count)
 873 {
 874         struct spcp8x5_private *priv = usb_get_serial_port_data(port);
 875         unsigned long flags;
 876
 877         dev_dbg(&port->dev, "%d bytes\n", count);
 878
 879         if (!count)
 880                 return count;
 881
 882         spin_lock_irqsave(&priv->lock, flags);
 883         count = put_ringbuf(priv->buf, buf, count);
 884         spin_unlock_irqrestore(&priv->lock, flags);
 885
 886         spcp8x5_send(port);
 887
 888         return count;
 889 }
 890
 891 static int spcp8x5_wait_modem_info(struct usb_serial_port *port,
 892                                    unsigned int arg)
 893 {
 894         struct spcp8x5_private *priv = usb_get_serial_port_data(port);
 895         unsigned long flags;
 896         unsigned int prevstatus;
 897         unsigned int status;
 898         unsigned int changed;
 899
 900         spin_lock_irqsave(&priv->lock, flags);
 901         prevstatus = priv->line_status;
 902         spin_unlock_irqrestore(&priv->lock, flags);
 903
 904         while (1) {
 905                 /* wake up in bulk read */
 906                 interruptible_sleep_on(&priv->delta_msr_wait);
 907
 908                 /* see if a signal did it */
 909                 if (signal_pending(current))
 910                         return -ERESTARTSYS;
 911
 912                 spin_lock_irqsave(&priv->lock, flags);
 913                 status = priv->line_status;
 914                 spin_unlock_irqrestore(&priv->lock, flags);
 915
 916                 changed = prevstatus^status;
 917
 918                 if (((arg & TIOCM_RNG) && (changed & MSR_STATUS_LINE_RI)) ||
 919                     ((arg & TIOCM_DSR) && (changed & MSR_STATUS_LINE_DSR)) ||
 920                     ((arg & TIOCM_CD)  && (changed & MSR_STATUS_LINE_DCD)) ||
 921                     ((arg & TIOCM_CTS) && (changed & MSR_STATUS_LINE_CTS)))
 922                         return 0;
 923
 924                 prevstatus = status;
 925         }
 926         /* NOTREACHED */
 927         return 0;
 928 }
 929
 930 static int spcp8x5_ioctl(struct tty_struct *tty, struct file *file,
 931                          unsigned int cmd, unsigned long arg)
 932 {
 933         struct usb_serial_port *port = tty->driver_data;
 934         dbg("%s (%d) cmd = 0x%04x", __func__, port->number, cmd);
 935
 936         switch (cmd) {
 937         case TIOCMIWAIT:
 938                 dbg("%s (%d) TIOCMIWAIT", __func__,  port->number);
 939                 return spcp8x5_wait_modem_info(port, arg);
 940
 941         default:
 942                 dbg("%s not supported = 0x%04x", __func__, cmd);
 943                 break;
 944         }
 945
 946         return -ENOIOCTLCMD;
 947 }
 948
 949 static int spcp8x5_tiocmset(struct tty_struct *tty, struct file *file,
 950                             unsigned int set, unsigned int clear)
 951 {
 952         struct usb_serial_port *port = tty->driver_data;
 953         struct spcp8x5_private *priv = usb_get_serial_port_data(port);
 954         unsigned long flags;
 955         u8 control;
 956
 957         spin_lock_irqsave(&priv->lock, flags);
 958         if (set & TIOCM_RTS)
 959                 priv->line_control |= MCR_RTS;
 960         if (set & TIOCM_DTR)
 961                 priv->line_control |= MCR_DTR;
 962         if (clear & TIOCM_RTS)
 963                 priv->line_control &= ~MCR_RTS;
 964         if (clear & TIOCM_DTR)
 965                 priv->line_control &= ~MCR_DTR;
 966         control = priv->line_control;
 967         spin_unlock_irqrestore(&priv->lock, flags);
 968
 969         return spcp8x5_set_ctrlLine(port->serial->dev, control , priv->type);
 970 }
 971
 972 static int spcp8x5_tiocmget(struct tty_struct *tty, struct file *file)
 973 {
 974         struct usb_serial_port *port = tty->driver_data;
 975         struct spcp8x5_private *priv = usb_get_serial_port_data(port);
 976         unsigned long flags;
 977         unsigned int mcr;
 978         unsigned int status;
 979         unsigned int result;
 980
 981         spin_lock_irqsave(&priv->lock, flags);
 982         mcr = priv->line_control;
 983         status = priv->line_status;
 984         spin_unlock_irqrestore(&priv->lock, flags);
 985
 986         result = ((mcr & MCR_DTR)                       ? TIOCM_DTR : 0)
 987                   | ((mcr & MCR_RTS)                    ? TIOCM_RTS : 0)
 988                   | ((status & MSR_STATUS_LINE_CTS)     ? TIOCM_CTS : 0)
 989                   | ((status & MSR_STATUS_LINE_DSR)     ? TIOCM_DSR : 0)
 990                   | ((status & MSR_STATUS_LINE_RI)      ? TIOCM_RI  : 0)
 991                   | ((status & MSR_STATUS_LINE_DCD)     ? TIOCM_CD  : 0);
 992
 993         return result;
 994 }
 995
 996 /* get the avail space room in ring buffer */
 997 static int spcp8x5_write_room(struct tty_struct *tty)
 998 {
 999         struct usb_serial_port *port = tty->driver_data;
1000         struct spcp8x5_private *priv = usb_get_serial_port_data(port);
1001         int room = 0;
1002         unsigned long flags;
1003
1004         spin_lock_irqsave(&priv->lock, flags);
1005         room = ringbuf_avail_space(priv->buf);
1006         spin_unlock_irqrestore(&priv->lock, flags);
1007
1008         return room;
1009 }
1010
1011 /* get the number of avail data in write ring buffer */
1012 static int spcp8x5_chars_in_buffer(struct tty_struct *tty)
1013 {
1014         struct usb_serial_port *port = tty->driver_data;
1015         struct spcp8x5_private *priv = usb_get_serial_port_data(port);
1016         int chars = 0;
1017         unsigned long flags;
1018
1019         spin_lock_irqsave(&priv->lock, flags);
1020         chars = ringbuf_avail_data(priv->buf);
1021         spin_unlock_irqrestore(&priv->lock, flags);
1022
1023         return chars;
1024 }
1025
1026 /* All of the device info needed for the spcp8x5 SIO serial converter */
1027 static struct usb_serial_driver spcp8x5_device = {
1028         .driver = {
1029                 .owner =        THIS_MODULE,
1030                 .name =         "SPCP8x5",
1031         },
1032         .id_table               = id_table,
1033         .num_ports              = 1,
1034         .open                   = spcp8x5_open,
1035         .close                  = spcp8x5_close,
1036         .write                  = spcp8x5_write,
1037         .set_termios            = spcp8x5_set_termios,
1038         .ioctl                  = spcp8x5_ioctl,
1039         .tiocmget               = spcp8x5_tiocmget,
1040         .tiocmset               = spcp8x5_tiocmset,
1041         .write_room             = spcp8x5_write_room,
1042         .read_bulk_callback     = spcp8x5_read_bulk_callback,
1043         .write_bulk_callback    = spcp8x5_write_bulk_callback,
1044         .chars_in_buffer        = spcp8x5_chars_in_buffer,
1045         .attach                 = spcp8x5_startup,
1046         .shutdown               = spcp8x5_shutdown,
1047 };
1048
1049 static int __init spcp8x5_init(void)
1050 {
1051         int retval;
1052         retval = usb_serial_register(&spcp8x5_device);
1053         if (retval)
1054                 goto failed_usb_serial_register;
1055         retval = usb_register(&spcp8x5_driver);
1056         if (retval)
1057                 goto failed_usb_register;
1058         printk(KERN_INFO KBUILD_MODNAME ": " DRIVER_VERSION ":"
1059                DRIVER_DESC "\n");
1060         return 0;
1061 failed_usb_register:
1062         usb_serial_deregister(&spcp8x5_device);
1063 failed_usb_serial_register:
1064         return retval;
1065 }
1066
1067 static void __exit spcp8x5_exit(void)
1068 {
1069         usb_deregister(&spcp8x5_driver);
1070         usb_serial_deregister(&spcp8x5_device);
1071 }
1072
1073 module_init(spcp8x5_init);
1074 module_exit(spcp8x5_exit);
1075
1076 MODULE_DESCRIPTION(DRIVER_DESC);
1077 MODULE_VERSION(DRIVER_VERSION);
1078 MODULE_LICENSE("GPL");
1079
1080 module_param(debug, bool, S_IRUGO | S_IWUSR);
1081 MODULE_PARM_DESC(debug, "Debug enabled or not");