git.oblomov.eu Git - linux-2.6/blob - drivers/scsi/aic7xxx/aic7xxx_core.c

   1 /*
   2  * Core routines and tables shareable across OS platforms.
   3  *
   4  * Copyright (c) 1994-2002 Justin T. Gibbs.
   5  * Copyright (c) 2000-2002 Adaptec Inc.
   6  * All rights reserved.
   7  *
   8  * Redistribution and use in source and binary forms, with or without
   9  * modification, are permitted provided that the following conditions
  10  * are met:
  11  * 1. Redistributions of source code must retain the above copyright
  12  *    notice, this list of conditions, and the following disclaimer,
  13  *    without modification.
  14  * 2. Redistributions in binary form must reproduce at minimum a disclaimer
  15  *    substantially similar to the "NO WARRANTY" disclaimer below
  16  *    ("Disclaimer") and any redistribution must be conditioned upon
  17  *    including a substantially similar Disclaimer requirement for further
  18  *    binary redistribution.
  19  * 3. Neither the names of the above-listed copyright holders nor the names
  20  *    of any contributors may be used to endorse or promote products derived
  21  *    from this software without specific prior written permission.
  22  *
  23  * Alternatively, this software may be distributed under the terms of the
  24  * GNU General Public License ("GPL") version 2 as published by the Free
  25  * Software Foundation.
  26  *
  27  * NO WARRANTY
  28  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
  29  * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
  30  * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
  31  * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
  32  * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
  33  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
  34  * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
  35  * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
  36  * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
  37  * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
  38  * POSSIBILITY OF SUCH DAMAGES.
  39  *
  40  * $Id: //depot/aic7xxx/aic7xxx/aic7xxx.c#155 $
  41  */
  42
  43 #ifdef __linux__
  44 #include "aic7xxx_osm.h"
  45 #include "aic7xxx_inline.h"
  46 #include "aicasm/aicasm_insformat.h"
  47 #else
  48 #include <dev/aic7xxx/aic7xxx_osm.h>
  49 #include <dev/aic7xxx/aic7xxx_inline.h>
  50 #include <dev/aic7xxx/aicasm/aicasm_insformat.h>
  51 #endif
  52
  53 /***************************** Lookup Tables **********************************/
  54 static const char *const ahc_chip_names[] = {
  55         "NONE",
  56         "aic7770",
  57         "aic7850",
  58         "aic7855",
  59         "aic7859",
  60         "aic7860",
  61         "aic7870",
  62         "aic7880",
  63         "aic7895",
  64         "aic7895C",
  65         "aic7890/91",
  66         "aic7896/97",
  67         "aic7892",
  68         "aic7899"
  69 };
  70 static const u_int num_chip_names = ARRAY_SIZE(ahc_chip_names);
  71
  72 /*
  73  * Hardware error codes.
  74  */
  75 struct ahc_hard_error_entry {
  76         uint8_t errno;
  77         const char *errmesg;
  78 };
  79
  80 static const struct ahc_hard_error_entry ahc_hard_errors[] = {
  81         { ILLHADDR,     "Illegal Host Access" },
  82         { ILLSADDR,     "Illegal Sequencer Address referrenced" },
  83         { ILLOPCODE,    "Illegal Opcode in sequencer program" },
  84         { SQPARERR,     "Sequencer Parity Error" },
  85         { DPARERR,      "Data-path Parity Error" },
  86         { MPARERR,      "Scratch or SCB Memory Parity Error" },
  87         { PCIERRSTAT,   "PCI Error detected" },
  88         { CIOPARERR,    "CIOBUS Parity Error" },
  89 };
  90 static const u_int num_errors = ARRAY_SIZE(ahc_hard_errors);
  91
  92 static const struct ahc_phase_table_entry ahc_phase_table[] =
  93 {
  94         { P_DATAOUT,    MSG_NOOP,               "in Data-out phase"     },
  95         { P_DATAIN,     MSG_INITIATOR_DET_ERR,  "in Data-in phase"      },
  96         { P_DATAOUT_DT, MSG_NOOP,               "in DT Data-out phase"  },
  97         { P_DATAIN_DT,  MSG_INITIATOR_DET_ERR,  "in DT Data-in phase"   },
  98         { P_COMMAND,    MSG_NOOP,               "in Command phase"      },
  99         { P_MESGOUT,    MSG_NOOP,               "in Message-out phase"  },
 100         { P_STATUS,     MSG_INITIATOR_DET_ERR,  "in Status phase"       },
 101         { P_MESGIN,     MSG_PARITY_ERROR,       "in Message-in phase"   },
 102         { P_BUSFREE,    MSG_NOOP,               "while idle"            },
 103         { 0,            MSG_NOOP,               "in unknown phase"      }
 104 };
 105
 106 /*
 107  * In most cases we only wish to itterate over real phases, so
 108  * exclude the last element from the count.
 109  */
 110 static const u_int num_phases = ARRAY_SIZE(ahc_phase_table) - 1;
 111
 112 /*
 113  * Valid SCSIRATE values.  (p. 3-17)
 114  * Provides a mapping of tranfer periods in ns to the proper value to
 115  * stick in the scsixfer reg.
 116  */
 117 static const struct ahc_syncrate ahc_syncrates[] =
 118 {
 119       /* ultra2    fast/ultra  period     rate */
 120         { 0x42,      0x000,      9,      "80.0" },
 121         { 0x03,      0x000,     10,      "40.0" },
 122         { 0x04,      0x000,     11,      "33.0" },
 123         { 0x05,      0x100,     12,      "20.0" },
 124         { 0x06,      0x110,     15,      "16.0" },
 125         { 0x07,      0x120,     18,      "13.4" },
 126         { 0x08,      0x000,     25,      "10.0" },
 127         { 0x19,      0x010,     31,      "8.0"  },
 128         { 0x1a,      0x020,     37,      "6.67" },
 129         { 0x1b,      0x030,     43,      "5.7"  },
 130         { 0x1c,      0x040,     50,      "5.0"  },
 131         { 0x00,      0x050,     56,      "4.4"  },
 132         { 0x00,      0x060,     62,      "4.0"  },
 133         { 0x00,      0x070,     68,      "3.6"  },
 134         { 0x00,      0x000,      0,      NULL   }
 135 };
 136
 137 /* Our Sequencer Program */
 138 #include "aic7xxx_seq.h"
 139
 140 /**************************** Function Declarations ***************************/
 141 static void             ahc_force_renegotiation(struct ahc_softc *ahc,
 142                                                 struct ahc_devinfo *devinfo);
 143 static struct ahc_tmode_tstate*
 144                         ahc_alloc_tstate(struct ahc_softc *ahc,
 145                                          u_int scsi_id, char channel);
 146 #ifdef AHC_TARGET_MODE
 147 static void             ahc_free_tstate(struct ahc_softc *ahc,
 148                                         u_int scsi_id, char channel, int force);
 149 #endif
 150 static const struct ahc_syncrate*
 151                         ahc_devlimited_syncrate(struct ahc_softc *ahc,
 152                                                 struct ahc_initiator_tinfo *,
 153                                                 u_int *period,
 154                                                 u_int *ppr_options,
 155                                                 role_t role);
 156 static void             ahc_update_pending_scbs(struct ahc_softc *ahc);
 157 static void             ahc_fetch_devinfo(struct ahc_softc *ahc,
 158                                           struct ahc_devinfo *devinfo);
 159 static void             ahc_scb_devinfo(struct ahc_softc *ahc,
 160                                         struct ahc_devinfo *devinfo,
 161                                         struct scb *scb);
 162 static void             ahc_assert_atn(struct ahc_softc *ahc);
 163 static void             ahc_setup_initiator_msgout(struct ahc_softc *ahc,
 164                                                    struct ahc_devinfo *devinfo,
 165                                                    struct scb *scb);
 166 static void             ahc_build_transfer_msg(struct ahc_softc *ahc,
 167                                                struct ahc_devinfo *devinfo);
 168 static void             ahc_construct_sdtr(struct ahc_softc *ahc,
 169                                            struct ahc_devinfo *devinfo,
 170                                            u_int period, u_int offset);
 171 static void             ahc_construct_wdtr(struct ahc_softc *ahc,
 172                                            struct ahc_devinfo *devinfo,
 173                                            u_int bus_width);
 174 static void             ahc_construct_ppr(struct ahc_softc *ahc,
 175                                           struct ahc_devinfo *devinfo,
 176                                           u_int period, u_int offset,
 177                                           u_int bus_width, u_int ppr_options);
 178 static void             ahc_clear_msg_state(struct ahc_softc *ahc);
 179 static void             ahc_handle_proto_violation(struct ahc_softc *ahc);
 180 static void             ahc_handle_message_phase(struct ahc_softc *ahc);
 181 typedef enum {
 182         AHCMSG_1B,
 183         AHCMSG_2B,
 184         AHCMSG_EXT
 185 } ahc_msgtype;
 186 static int              ahc_sent_msg(struct ahc_softc *ahc, ahc_msgtype type,
 187                                      u_int msgval, int full);
 188 static int              ahc_parse_msg(struct ahc_softc *ahc,
 189                                       struct ahc_devinfo *devinfo);
 190 static int              ahc_handle_msg_reject(struct ahc_softc *ahc,
 191                                               struct ahc_devinfo *devinfo);
 192 static void             ahc_handle_ign_wide_residue(struct ahc_softc *ahc,
 193                                                 struct ahc_devinfo *devinfo);
 194 static void             ahc_reinitialize_dataptrs(struct ahc_softc *ahc);
 195 static void             ahc_handle_devreset(struct ahc_softc *ahc,
 196                                             struct ahc_devinfo *devinfo,
 197                                             cam_status status, char *message,
 198                                             int verbose_level);
 199 #ifdef AHC_TARGET_MODE
 200 static void             ahc_setup_target_msgin(struct ahc_softc *ahc,
 201                                                struct ahc_devinfo *devinfo,
 202                                                struct scb *scb);
 203 #endif
 204
 205 static bus_dmamap_callback_t    ahc_dmamap_cb;
 206 static void             ahc_build_free_scb_list(struct ahc_softc *ahc);
 207 static int              ahc_init_scbdata(struct ahc_softc *ahc);
 208 static void             ahc_fini_scbdata(struct ahc_softc *ahc);
 209 static void             ahc_qinfifo_requeue(struct ahc_softc *ahc,
 210                                             struct scb *prev_scb,
 211                                             struct scb *scb);
 212 static int              ahc_qinfifo_count(struct ahc_softc *ahc);
 213 static u_int            ahc_rem_scb_from_disc_list(struct ahc_softc *ahc,
 214                                                    u_int prev, u_int scbptr);
 215 static void             ahc_add_curscb_to_free_list(struct ahc_softc *ahc);
 216 static u_int            ahc_rem_wscb(struct ahc_softc *ahc,
 217                                      u_int scbpos, u_int prev);
 218 static void             ahc_reset_current_bus(struct ahc_softc *ahc);
 219 #ifdef AHC_DUMP_SEQ
 220 static void             ahc_dumpseq(struct ahc_softc *ahc);
 221 #endif
 222 static int              ahc_loadseq(struct ahc_softc *ahc);
 223 static int              ahc_check_patch(struct ahc_softc *ahc,
 224                                         const struct patch **start_patch,
 225                                         u_int start_instr, u_int *skip_addr);
 226 static void             ahc_download_instr(struct ahc_softc *ahc,
 227                                            u_int instrptr, uint8_t *dconsts);
 228 #ifdef AHC_TARGET_MODE
 229 static void             ahc_queue_lstate_event(struct ahc_softc *ahc,
 230                                                struct ahc_tmode_lstate *lstate,
 231                                                u_int initiator_id,
 232                                                u_int event_type,
 233                                                u_int event_arg);
 234 static void             ahc_update_scsiid(struct ahc_softc *ahc,
 235                                           u_int targid_mask);
 236 static int              ahc_handle_target_cmd(struct ahc_softc *ahc,
 237                                               struct target_cmd *cmd);
 238 #endif
 239
 240 static u_int            ahc_index_busy_tcl(struct ahc_softc *ahc, u_int tcl);
 241 static void             ahc_unbusy_tcl(struct ahc_softc *ahc, u_int tcl);
 242 static void             ahc_busy_tcl(struct ahc_softc *ahc,
 243                                      u_int tcl, u_int busyid);
 244
 245 /************************** SCB and SCB queue management **********************/
 246 static void             ahc_run_untagged_queues(struct ahc_softc *ahc);
 247 static void             ahc_run_untagged_queue(struct ahc_softc *ahc,
 248                                                struct scb_tailq *queue);
 249
 250 /****************************** Initialization ********************************/
 251 static void              ahc_alloc_scbs(struct ahc_softc *ahc);
 252 static void              ahc_shutdown(void *arg);
 253
 254 /*************************** Interrupt Services *******************************/
 255 static void             ahc_clear_intstat(struct ahc_softc *ahc);
 256 static void             ahc_run_qoutfifo(struct ahc_softc *ahc);
 257 #ifdef AHC_TARGET_MODE
 258 static void             ahc_run_tqinfifo(struct ahc_softc *ahc, int paused);
 259 #endif
 260 static void             ahc_handle_brkadrint(struct ahc_softc *ahc);
 261 static void             ahc_handle_seqint(struct ahc_softc *ahc, u_int intstat);
 262 static void             ahc_handle_scsiint(struct ahc_softc *ahc,
 263                                            u_int intstat);
 264 static void             ahc_clear_critical_section(struct ahc_softc *ahc);
 265
 266 /***************************** Error Recovery *********************************/
 267 static void             ahc_freeze_devq(struct ahc_softc *ahc, struct scb *scb);
 268 static int              ahc_abort_scbs(struct ahc_softc *ahc, int target,
 269                                        char channel, int lun, u_int tag,
 270                                        role_t role, uint32_t status);
 271 static void             ahc_calc_residual(struct ahc_softc *ahc,
 272                                           struct scb *scb);
 273
 274 /*********************** Untagged Transaction Routines ************************/
 275 static inline void      ahc_freeze_untagged_queues(struct ahc_softc *ahc);
 276 static inline void      ahc_release_untagged_queues(struct ahc_softc *ahc);
 277
 278 /*
 279  * Block our completion routine from starting the next untagged
 280  * transaction for this target or target lun.
 281  */
 282 static inline void
 283 ahc_freeze_untagged_queues(struct ahc_softc *ahc)
 284 {
 285         if ((ahc->flags & AHC_SCB_BTT) == 0)
 286                 ahc->untagged_queue_lock++;
 287 }
 288
 289 /*
 290  * Allow the next untagged transaction for this target or target lun
 291  * to be executed.  We use a counting semaphore to allow the lock
 292  * to be acquired recursively.  Once the count drops to zero, the
 293  * transaction queues will be run.
 294  */
 295 static inline void
 296 ahc_release_untagged_queues(struct ahc_softc *ahc)
 297 {
 298         if ((ahc->flags & AHC_SCB_BTT) == 0) {
 299                 ahc->untagged_queue_lock--;
 300                 if (ahc->untagged_queue_lock == 0)
 301                         ahc_run_untagged_queues(ahc);
 302         }
 303 }
 304
 305 /************************* Sequencer Execution Control ************************/
 306 /*
 307  * Work around any chip bugs related to halting sequencer execution.
 308  * On Ultra2 controllers, we must clear the CIOBUS stretch signal by
 309  * reading a register that will set this signal and deassert it.
 310  * Without this workaround, if the chip is paused, by an interrupt or
 311  * manual pause while accessing scb ram, accesses to certain registers
 312  * will hang the system (infinite pci retries).
 313  */
 314 static void
 315 ahc_pause_bug_fix(struct ahc_softc *ahc)
 316 {
 317         if ((ahc->features & AHC_ULTRA2) != 0)
 318                 (void)ahc_inb(ahc, CCSCBCTL);
 319 }
 320
 321 /*
 322  * Determine whether the sequencer has halted code execution.
 323  * Returns non-zero status if the sequencer is stopped.
 324  */
 325 int
 326 ahc_is_paused(struct ahc_softc *ahc)
 327 {
 328         return ((ahc_inb(ahc, HCNTRL) & PAUSE) != 0);
 329 }
 330
 331 /*
 332  * Request that the sequencer stop and wait, indefinitely, for it
 333  * to stop.  The sequencer will only acknowledge that it is paused
 334  * once it has reached an instruction boundary and PAUSEDIS is
 335  * cleared in the SEQCTL register.  The sequencer may use PAUSEDIS
 336  * for critical sections.
 337  */
 338 void
 339 ahc_pause(struct ahc_softc *ahc)
 340 {
 341         ahc_outb(ahc, HCNTRL, ahc->pause);
 342
 343         /*
 344          * Since the sequencer can disable pausing in a critical section, we
 345          * must loop until it actually stops.
 346          */
 347         while (ahc_is_paused(ahc) == 0)
 348                 ;
 349
 350         ahc_pause_bug_fix(ahc);
 351 }
 352
 353 /*
 354  * Allow the sequencer to continue program execution.
 355  * We check here to ensure that no additional interrupt
 356  * sources that would cause the sequencer to halt have been
 357  * asserted.  If, for example, a SCSI bus reset is detected
 358  * while we are fielding a different, pausing, interrupt type,
 359  * we don't want to release the sequencer before going back
 360  * into our interrupt handler and dealing with this new
 361  * condition.
 362  */
 363 void
 364 ahc_unpause(struct ahc_softc *ahc)
 365 {
 366         if ((ahc_inb(ahc, INTSTAT) & (SCSIINT | SEQINT | BRKADRINT)) == 0)
 367                 ahc_outb(ahc, HCNTRL, ahc->unpause);
 368 }
 369
 370 /************************** Memory mapping routines ***************************/
 371 static struct ahc_dma_seg *
 372 ahc_sg_bus_to_virt(struct scb *scb, uint32_t sg_busaddr)
 373 {
 374         int sg_index;
 375
 376         sg_index = (sg_busaddr - scb->sg_list_phys)/sizeof(struct ahc_dma_seg);
 377         /* sg_list_phys points to entry 1, not 0 */
 378         sg_index++;
 379
 380         return (&scb->sg_list[sg_index]);
 381 }
 382
 383 static uint32_t
 384 ahc_sg_virt_to_bus(struct scb *scb, struct ahc_dma_seg *sg)
 385 {
 386         int sg_index;
 387
 388         /* sg_list_phys points to entry 1, not 0 */
 389         sg_index = sg - &scb->sg_list[1];
 390
 391         return (scb->sg_list_phys + (sg_index * sizeof(*scb->sg_list)));
 392 }
 393
 394 static uint32_t
 395 ahc_hscb_busaddr(struct ahc_softc *ahc, u_int index)
 396 {
 397         return (ahc->scb_data->hscb_busaddr
 398                 + (sizeof(struct hardware_scb) * index));
 399 }
 400
 401 static void
 402 ahc_sync_scb(struct ahc_softc *ahc, struct scb *scb, int op)
 403 {
 404         ahc_dmamap_sync(ahc, ahc->scb_data->hscb_dmat,
 405                         ahc->scb_data->hscb_dmamap,
 406                         /*offset*/(scb->hscb - ahc->hscbs) * sizeof(*scb->hscb),
 407                         /*len*/sizeof(*scb->hscb), op);
 408 }
 409
 410 void
 411 ahc_sync_sglist(struct ahc_softc *ahc, struct scb *scb, int op)
 412 {
 413         if (scb->sg_count == 0)
 414                 return;
 415
 416         ahc_dmamap_sync(ahc, ahc->scb_data->sg_dmat, scb->sg_map->sg_dmamap,
 417                         /*offset*/(scb->sg_list - scb->sg_map->sg_vaddr)
 418                                 * sizeof(struct ahc_dma_seg),
 419                         /*len*/sizeof(struct ahc_dma_seg) * scb->sg_count, op);
 420 }
 421
 422 #ifdef AHC_TARGET_MODE
 423 static uint32_t
 424 ahc_targetcmd_offset(struct ahc_softc *ahc, u_int index)
 425 {
 426         return (((uint8_t *)&ahc->targetcmds[index]) - ahc->qoutfifo);
 427 }
 428 #endif
 429
 430 /*********************** Miscelaneous Support Functions ***********************/
 431 /*
 432  * Determine whether the sequencer reported a residual
 433  * for this SCB/transaction.
 434  */
 435 static void
 436 ahc_update_residual(struct ahc_softc *ahc, struct scb *scb)
 437 {
 438         uint32_t sgptr;
 439
 440         sgptr = ahc_le32toh(scb->hscb->sgptr);
 441         if ((sgptr & SG_RESID_VALID) != 0)
 442                 ahc_calc_residual(ahc, scb);
 443 }
 444
 445 /*
 446  * Return pointers to the transfer negotiation information
 447  * for the specified our_id/remote_id pair.
 448  */
 449 struct ahc_initiator_tinfo *
 450 ahc_fetch_transinfo(struct ahc_softc *ahc, char channel, u_int our_id,
 451                     u_int remote_id, struct ahc_tmode_tstate **tstate)
 452 {
 453         /*
 454          * Transfer data structures are stored from the perspective
 455          * of the target role.  Since the parameters for a connection
 456          * in the initiator role to a given target are the same as
 457          * when the roles are reversed, we pretend we are the target.
 458          */
 459         if (channel == 'B')
 460                 our_id += 8;
 461         *tstate = ahc->enabled_targets[our_id];
 462         return (&(*tstate)->transinfo[remote_id]);
 463 }
 464
 465 uint16_t
 466 ahc_inw(struct ahc_softc *ahc, u_int port)
 467 {
 468         uint16_t r = ahc_inb(ahc, port+1) << 8;
 469         return r | ahc_inb(ahc, port);
 470 }
 471
 472 void
 473 ahc_outw(struct ahc_softc *ahc, u_int port, u_int value)
 474 {
 475         ahc_outb(ahc, port, value & 0xFF);
 476         ahc_outb(ahc, port+1, (value >> 8) & 0xFF);
 477 }
 478
 479 uint32_t
 480 ahc_inl(struct ahc_softc *ahc, u_int port)
 481 {
 482         return ((ahc_inb(ahc, port))
 483               | (ahc_inb(ahc, port+1) << 8)
 484               | (ahc_inb(ahc, port+2) << 16)
 485               | (ahc_inb(ahc, port+3) << 24));
 486 }
 487
 488 void
 489 ahc_outl(struct ahc_softc *ahc, u_int port, uint32_t value)
 490 {
 491         ahc_outb(ahc, port, (value) & 0xFF);
 492         ahc_outb(ahc, port+1, ((value) >> 8) & 0xFF);
 493         ahc_outb(ahc, port+2, ((value) >> 16) & 0xFF);
 494         ahc_outb(ahc, port+3, ((value) >> 24) & 0xFF);
 495 }
 496
 497 uint64_t
 498 ahc_inq(struct ahc_softc *ahc, u_int port)
 499 {
 500         return ((ahc_inb(ahc, port))
 501               | (ahc_inb(ahc, port+1) << 8)
 502               | (ahc_inb(ahc, port+2) << 16)
 503               | (ahc_inb(ahc, port+3) << 24)
 504               | (((uint64_t)ahc_inb(ahc, port+4)) << 32)
 505               | (((uint64_t)ahc_inb(ahc, port+5)) << 40)
 506               | (((uint64_t)ahc_inb(ahc, port+6)) << 48)
 507               | (((uint64_t)ahc_inb(ahc, port+7)) << 56));
 508 }
 509
 510 void
 511 ahc_outq(struct ahc_softc *ahc, u_int port, uint64_t value)
 512 {
 513         ahc_outb(ahc, port, value & 0xFF);
 514         ahc_outb(ahc, port+1, (value >> 8) & 0xFF);
 515         ahc_outb(ahc, port+2, (value >> 16) & 0xFF);
 516         ahc_outb(ahc, port+3, (value >> 24) & 0xFF);
 517         ahc_outb(ahc, port+4, (value >> 32) & 0xFF);
 518         ahc_outb(ahc, port+5, (value >> 40) & 0xFF);
 519         ahc_outb(ahc, port+6, (value >> 48) & 0xFF);
 520         ahc_outb(ahc, port+7, (value >> 56) & 0xFF);
 521 }
 522
 523 /*
 524  * Get a free scb. If there are none, see if we can allocate a new SCB.
 525  */
 526 struct scb *
 527 ahc_get_scb(struct ahc_softc *ahc)
 528 {
 529         struct scb *scb;
 530
 531         if ((scb = SLIST_FIRST(&ahc->scb_data->free_scbs)) == NULL) {
 532                 ahc_alloc_scbs(ahc);
 533                 scb = SLIST_FIRST(&ahc->scb_data->free_scbs);
 534                 if (scb == NULL)
 535                         return (NULL);
 536         }
 537         SLIST_REMOVE_HEAD(&ahc->scb_data->free_scbs, links.sle);
 538         return (scb);
 539 }
 540
 541 /*
 542  * Return an SCB resource to the free list.
 543  */
 544 void
 545 ahc_free_scb(struct ahc_softc *ahc, struct scb *scb)
 546 {
 547         struct hardware_scb *hscb;
 548
 549         hscb = scb->hscb;
 550         /* Clean up for the next user */
 551         ahc->scb_data->scbindex[hscb->tag] = NULL;
 552         scb->flags = SCB_FREE;
 553         hscb->control = 0;
 554
 555         SLIST_INSERT_HEAD(&ahc->scb_data->free_scbs, scb, links.sle);
 556
 557         /* Notify the OSM that a resource is now available. */
 558         ahc_platform_scb_free(ahc, scb);
 559 }
 560
 561 struct scb *
 562 ahc_lookup_scb(struct ahc_softc *ahc, u_int tag)
 563 {
 564         struct scb* scb;
 565
 566         scb = ahc->scb_data->scbindex[tag];
 567         if (scb != NULL)
 568                 ahc_sync_scb(ahc, scb,
 569                              BUS_DMASYNC_POSTREAD|BUS_DMASYNC_POSTWRITE);
 570         return (scb);
 571 }
 572
 573 static void
 574 ahc_swap_with_next_hscb(struct ahc_softc *ahc, struct scb *scb)
 575 {
 576         struct hardware_scb *q_hscb;
 577         u_int  saved_tag;
 578
 579         /*
 580          * Our queuing method is a bit tricky.  The card
 581          * knows in advance which HSCB to download, and we
 582          * can't disappoint it.  To achieve this, the next
 583          * SCB to download is saved off in ahc->next_queued_scb.
 584          * When we are called to queue "an arbitrary scb",
 585          * we copy the contents of the incoming HSCB to the one
 586          * the sequencer knows about, swap HSCB pointers and
 587          * finally assign the SCB to the tag indexed location
 588          * in the scb_array.  This makes sure that we can still
 589          * locate the correct SCB by SCB_TAG.
 590          */
 591         q_hscb = ahc->next_queued_scb->hscb;
 592         saved_tag = q_hscb->tag;
 593         memcpy(q_hscb, scb->hscb, sizeof(*scb->hscb));
 594         if ((scb->flags & SCB_CDB32_PTR) != 0) {
 595                 q_hscb->shared_data.cdb_ptr =
 596                     ahc_htole32(ahc_hscb_busaddr(ahc, q_hscb->tag)
 597                               + offsetof(struct hardware_scb, cdb32));
 598         }
 599         q_hscb->tag = saved_tag;
 600         q_hscb->next = scb->hscb->tag;
 601
 602         /* Now swap HSCB pointers. */
 603         ahc->next_queued_scb->hscb = scb->hscb;
 604         scb->hscb = q_hscb;
 605
 606         /* Now define the mapping from tag to SCB in the scbindex */
 607         ahc->scb_data->scbindex[scb->hscb->tag] = scb;
 608 }
 609
 610 /*
 611  * Tell the sequencer about a new transaction to execute.
 612  */
 613 void
 614 ahc_queue_scb(struct ahc_softc *ahc, struct scb *scb)
 615 {
 616         ahc_swap_with_next_hscb(ahc, scb);
 617
 618         if (scb->hscb->tag == SCB_LIST_NULL
 619          || scb->hscb->next == SCB_LIST_NULL)
 620                 panic("Attempt to queue invalid SCB tag %x:%x\n",
 621                       scb->hscb->tag, scb->hscb->next);
 622
 623         /*
 624          * Setup data "oddness".
 625          */
 626         scb->hscb->lun &= LID;
 627         if (ahc_get_transfer_length(scb) & 0x1)
 628                 scb->hscb->lun |= SCB_XFERLEN_ODD;
 629
 630         /*
 631          * Keep a history of SCBs we've downloaded in the qinfifo.
 632          */
 633         ahc->qinfifo[ahc->qinfifonext++] = scb->hscb->tag;
 634
 635         /*
 636          * Make sure our data is consistent from the
 637          * perspective of the adapter.
 638          */
 639         ahc_sync_scb(ahc, scb, BUS_DMASYNC_PREREAD|BUS_DMASYNC_PREWRITE);
 640
 641         /* Tell the adapter about the newly queued SCB */
 642         if ((ahc->features & AHC_QUEUE_REGS) != 0) {
 643                 ahc_outb(ahc, HNSCB_QOFF, ahc->qinfifonext);
 644         } else {
 645                 if ((ahc->features & AHC_AUTOPAUSE) == 0)
 646                         ahc_pause(ahc);
 647                 ahc_outb(ahc, KERNEL_QINPOS, ahc->qinfifonext);
 648                 if ((ahc->features & AHC_AUTOPAUSE) == 0)
 649                         ahc_unpause(ahc);
 650         }
 651 }
 652
 653 struct scsi_sense_data *
 654 ahc_get_sense_buf(struct ahc_softc *ahc, struct scb *scb)
 655 {
 656         int offset;
 657
 658         offset = scb - ahc->scb_data->scbarray;
 659         return (&ahc->scb_data->sense[offset]);
 660 }
 661
 662 static uint32_t
 663 ahc_get_sense_bufaddr(struct ahc_softc *ahc, struct scb *scb)
 664 {
 665         int offset;
 666
 667         offset = scb - ahc->scb_data->scbarray;
 668         return (ahc->scb_data->sense_busaddr
 669               + (offset * sizeof(struct scsi_sense_data)));
 670 }
 671
 672 /************************** Interrupt Processing ******************************/
 673 static void
 674 ahc_sync_qoutfifo(struct ahc_softc *ahc, int op)
 675 {
 676         ahc_dmamap_sync(ahc, ahc->shared_data_dmat, ahc->shared_data_dmamap,
 677                         /*offset*/0, /*len*/256, op);
 678 }
 679
 680 static void
 681 ahc_sync_tqinfifo(struct ahc_softc *ahc, int op)
 682 {
 683 #ifdef AHC_TARGET_MODE
 684         if ((ahc->flags & AHC_TARGETROLE) != 0) {
 685                 ahc_dmamap_sync(ahc, ahc->shared_data_dmat,
 686                                 ahc->shared_data_dmamap,
 687                                 ahc_targetcmd_offset(ahc, 0),
 688                                 sizeof(struct target_cmd) * AHC_TMODE_CMDS,
 689                                 op);
 690         }
 691 #endif
 692 }
 693
 694 /*
 695  * See if the firmware has posted any completed commands
 696  * into our in-core command complete fifos.
 697  */
 698 #define AHC_RUN_QOUTFIFO 0x1
 699 #define AHC_RUN_TQINFIFO 0x2
 700 static u_int
 701 ahc_check_cmdcmpltqueues(struct ahc_softc *ahc)
 702 {
 703         u_int retval;
 704
 705         retval = 0;
 706         ahc_dmamap_sync(ahc, ahc->shared_data_dmat, ahc->shared_data_dmamap,
 707                         /*offset*/ahc->qoutfifonext, /*len*/1,
 708                         BUS_DMASYNC_POSTREAD);
 709         if (ahc->qoutfifo[ahc->qoutfifonext] != SCB_LIST_NULL)
 710                 retval |= AHC_RUN_QOUTFIFO;
 711 #ifdef AHC_TARGET_MODE
 712         if ((ahc->flags & AHC_TARGETROLE) != 0
 713          && (ahc->flags & AHC_TQINFIFO_BLOCKED) == 0) {
 714                 ahc_dmamap_sync(ahc, ahc->shared_data_dmat,
 715                                 ahc->shared_data_dmamap,
 716                                 ahc_targetcmd_offset(ahc, ahc->tqinfifofnext),
 717                                 /*len*/sizeof(struct target_cmd),
 718                                 BUS_DMASYNC_POSTREAD);
 719                 if (ahc->targetcmds[ahc->tqinfifonext].cmd_valid != 0)
 720                         retval |= AHC_RUN_TQINFIFO;
 721         }
 722 #endif
 723         return (retval);
 724 }
 725
 726 /*
 727  * Catch an interrupt from the adapter
 728  */
 729 int
 730 ahc_intr(struct ahc_softc *ahc)
 731 {
 732         u_int   intstat;
 733
 734         if ((ahc->pause & INTEN) == 0) {
 735                 /*
 736                  * Our interrupt is not enabled on the chip
 737                  * and may be disabled for re-entrancy reasons,
 738                  * so just return.  This is likely just a shared
 739                  * interrupt.
 740                  */
 741                 return (0);
 742         }
 743         /*
 744          * Instead of directly reading the interrupt status register,
 745          * infer the cause of the interrupt by checking our in-core
 746          * completion queues.  This avoids a costly PCI bus read in
 747          * most cases.
 748          */
 749         if ((ahc->flags & (AHC_ALL_INTERRUPTS|AHC_EDGE_INTERRUPT)) == 0
 750          && (ahc_check_cmdcmpltqueues(ahc) != 0))
 751                 intstat = CMDCMPLT;
 752         else {
 753                 intstat = ahc_inb(ahc, INTSTAT);
 754         }
 755
 756         if ((intstat & INT_PEND) == 0) {
 757 #if AHC_PCI_CONFIG > 0
 758                 if (ahc->unsolicited_ints > 500) {
 759                         ahc->unsolicited_ints = 0;
 760                         if ((ahc->chip & AHC_PCI) != 0
 761                          && (ahc_inb(ahc, ERROR) & PCIERRSTAT) != 0)
 762                                 ahc->bus_intr(ahc);
 763                 }
 764 #endif
 765                 ahc->unsolicited_ints++;
 766                 return (0);
 767         }
 768         ahc->unsolicited_ints = 0;
 769
 770         if (intstat & CMDCMPLT) {
 771                 ahc_outb(ahc, CLRINT, CLRCMDINT);
 772
 773                 /*
 774                  * Ensure that the chip sees that we've cleared
 775                  * this interrupt before we walk the output fifo.
 776                  * Otherwise, we may, due to posted bus writes,
 777                  * clear the interrupt after we finish the scan,
 778                  * and after the sequencer has added new entries
 779                  * and asserted the interrupt again.
 780                  */
 781                 ahc_flush_device_writes(ahc);
 782                 ahc_run_qoutfifo(ahc);
 783 #ifdef AHC_TARGET_MODE
 784                 if ((ahc->flags & AHC_TARGETROLE) != 0)
 785                         ahc_run_tqinfifo(ahc, /*paused*/FALSE);
 786 #endif
 787         }
 788
 789         /*
 790          * Handle statuses that may invalidate our cached
 791          * copy of INTSTAT separately.
 792          */
 793         if (intstat == 0xFF && (ahc->features & AHC_REMOVABLE) != 0) {
 794                 /* Hot eject.  Do nothing */
 795         } else if (intstat & BRKADRINT) {
 796                 ahc_handle_brkadrint(ahc);
 797         } else if ((intstat & (SEQINT|SCSIINT)) != 0) {
 798
 799                 ahc_pause_bug_fix(ahc);
 800
 801                 if ((intstat & SEQINT) != 0)
 802                         ahc_handle_seqint(ahc, intstat);
 803
 804                 if ((intstat & SCSIINT) != 0)
 805                         ahc_handle_scsiint(ahc, intstat);
 806         }
 807         return (1);
 808 }
 809
 810 /************************* Sequencer Execution Control ************************/
 811 /*
 812  * Restart the sequencer program from address zero
 813  */
 814 static void
 815 ahc_restart(struct ahc_softc *ahc)
 816 {
 817         uint8_t sblkctl;
 818
 819         ahc_pause(ahc);
 820
 821         /* No more pending messages. */
 822         ahc_clear_msg_state(ahc);
 823
 824         ahc_outb(ahc, SCSISIGO, 0);             /* De-assert BSY */
 825         ahc_outb(ahc, MSG_OUT, MSG_NOOP);       /* No message to send */
 826         ahc_outb(ahc, SXFRCTL1, ahc_inb(ahc, SXFRCTL1) & ~BITBUCKET);
 827         ahc_outb(ahc, LASTPHASE, P_BUSFREE);
 828         ahc_outb(ahc, SAVED_SCSIID, 0xFF);
 829         ahc_outb(ahc, SAVED_LUN, 0xFF);
 830
 831         /*
 832          * Ensure that the sequencer's idea of TQINPOS
 833          * matches our own.  The sequencer increments TQINPOS
 834          * only after it sees a DMA complete and a reset could
 835          * occur before the increment leaving the kernel to believe
 836          * the command arrived but the sequencer to not.
 837          */
 838         ahc_outb(ahc, TQINPOS, ahc->tqinfifonext);
 839
 840         /* Always allow reselection */
 841         ahc_outb(ahc, SCSISEQ,
 842                  ahc_inb(ahc, SCSISEQ_TEMPLATE) & (ENSELI|ENRSELI|ENAUTOATNP));
 843         if ((ahc->features & AHC_CMD_CHAN) != 0) {
 844                 /* Ensure that no DMA operations are in progress */
 845                 ahc_outb(ahc, CCSCBCNT, 0);
 846                 ahc_outb(ahc, CCSGCTL, 0);
 847                 ahc_outb(ahc, CCSCBCTL, 0);
 848         }
 849         /*
 850          * If we were in the process of DMA'ing SCB data into
 851          * an SCB, replace that SCB on the free list.  This prevents
 852          * an SCB leak.
 853          */
 854         if ((ahc_inb(ahc, SEQ_FLAGS2) & SCB_DMA) != 0) {
 855                 ahc_add_curscb_to_free_list(ahc);
 856                 ahc_outb(ahc, SEQ_FLAGS2,
 857                          ahc_inb(ahc, SEQ_FLAGS2) & ~SCB_DMA);
 858         }
 859
 860         /*
 861          * Clear any pending sequencer interrupt.  It is no
 862          * longer relevant since we're resetting the Program
 863          * Counter.
 864          */
 865         ahc_outb(ahc, CLRINT, CLRSEQINT);
 866
 867         ahc_outb(ahc, MWI_RESIDUAL, 0);
 868         ahc_outb(ahc, SEQCTL, ahc->seqctl);
 869         ahc_outb(ahc, SEQADDR0, 0);
 870         ahc_outb(ahc, SEQADDR1, 0);
 871
 872         /*
 873          * Take the LED out of diagnostic mode on PM resume, too
 874          */
 875         sblkctl = ahc_inb(ahc, SBLKCTL);
 876         ahc_outb(ahc, SBLKCTL, (sblkctl & ~(DIAGLEDEN|DIAGLEDON)));
 877
 878         ahc_unpause(ahc);
 879 }
 880
 881 /************************* Input/Output Queues ********************************/
 882 static void
 883 ahc_run_qoutfifo(struct ahc_softc *ahc)
 884 {
 885         struct scb *scb;
 886         u_int  scb_index;
 887
 888         ahc_sync_qoutfifo(ahc, BUS_DMASYNC_POSTREAD);
 889         while (ahc->qoutfifo[ahc->qoutfifonext] != SCB_LIST_NULL) {
 890
 891                 scb_index = ahc->qoutfifo[ahc->qoutfifonext];
 892                 if ((ahc->qoutfifonext & 0x03) == 0x03) {
 893                         u_int modnext;
 894
 895                         /*
 896                          * Clear 32bits of QOUTFIFO at a time
 897                          * so that we don't clobber an incoming
 898                          * byte DMA to the array on architectures
 899                          * that only support 32bit load and store
 900                          * operations.
 901                          */
 902                         modnext = ahc->qoutfifonext & ~0x3;
 903                         *((uint32_t *)(&ahc->qoutfifo[modnext])) = 0xFFFFFFFFUL;
 904                         ahc_dmamap_sync(ahc, ahc->shared_data_dmat,
 905                                         ahc->shared_data_dmamap,
 906                                         /*offset*/modnext, /*len*/4,
 907                                         BUS_DMASYNC_PREREAD);
 908                 }
 909                 ahc->qoutfifonext++;
 910
 911                 scb = ahc_lookup_scb(ahc, scb_index);
 912                 if (scb == NULL) {
 913                         printf("%s: WARNING no command for scb %d "
 914                                "(cmdcmplt)\nQOUTPOS = %d\n",
 915                                ahc_name(ahc), scb_index,
 916                                (ahc->qoutfifonext - 1) & 0xFF);
 917                         continue;
 918                 }
 919
 920                 /*
 921                  * Save off the residual
 922                  * if there is one.
 923                  */
 924                 ahc_update_residual(ahc, scb);
 925                 ahc_done(ahc, scb);
 926         }
 927 }
 928
 929 static void
 930 ahc_run_untagged_queues(struct ahc_softc *ahc)
 931 {
 932         int i;
 933
 934         for (i = 0; i < 16; i++)
 935                 ahc_run_untagged_queue(ahc, &ahc->untagged_queues[i]);
 936 }
 937
 938 static void
 939 ahc_run_untagged_queue(struct ahc_softc *ahc, struct scb_tailq *queue)
 940 {
 941         struct scb *scb;
 942
 943         if (ahc->untagged_queue_lock != 0)
 944                 return;
 945
 946         if ((scb = TAILQ_FIRST(queue)) != NULL
 947          && (scb->flags & SCB_ACTIVE) == 0) {
 948                 scb->flags |= SCB_ACTIVE;
 949                 ahc_queue_scb(ahc, scb);
 950         }
 951 }
 952
 953 /************************* Interrupt Handling *********************************/
 954 static void
 955 ahc_handle_brkadrint(struct ahc_softc *ahc)
 956 {
 957         /*
 958          * We upset the sequencer :-(
 959          * Lookup the error message
 960          */
 961         int i;
 962         int error;
 963
 964         error = ahc_inb(ahc, ERROR);
 965         for (i = 0; error != 1 && i < num_errors; i++)
 966                 error >>= 1;
 967         printf("%s: brkadrint, %s at seqaddr = 0x%x\n",
 968                ahc_name(ahc), ahc_hard_errors[i].errmesg,
 969                ahc_inb(ahc, SEQADDR0) |
 970                (ahc_inb(ahc, SEQADDR1) << 8));
 971
 972         ahc_dump_card_state(ahc);
 973
 974         /* Tell everyone that this HBA is no longer available */
 975         ahc_abort_scbs(ahc, CAM_TARGET_WILDCARD, ALL_CHANNELS,
 976                        CAM_LUN_WILDCARD, SCB_LIST_NULL, ROLE_UNKNOWN,
 977                        CAM_NO_HBA);
 978
 979         /* Disable all interrupt sources by resetting the controller */
 980         ahc_shutdown(ahc);
 981 }
 982
 983 static void
 984 ahc_handle_seqint(struct ahc_softc *ahc, u_int intstat)
 985 {
 986         struct scb *scb;
 987         struct ahc_devinfo devinfo;
 988
 989         ahc_fetch_devinfo(ahc, &devinfo);
 990
 991         /*
 992          * Clear the upper byte that holds SEQINT status
 993          * codes and clear the SEQINT bit. We will unpause
 994          * the sequencer, if appropriate, after servicing
 995          * the request.
 996          */
 997         ahc_outb(ahc, CLRINT, CLRSEQINT);
 998         switch (intstat & SEQINT_MASK) {
 999         case BAD_STATUS:
1000         {
1001                 u_int  scb_index;
1002                 struct hardware_scb *hscb;
1003
1004                 /*
1005                  * Set the default return value to 0 (don't
1006                  * send sense).  The sense code will change
1007                  * this if needed.
1008                  */
1009                 ahc_outb(ahc, RETURN_1, 0);
1010
1011                 /*
1012                  * The sequencer will notify us when a command
1013                  * has an error that would be of interest to
1014                  * the kernel.  This allows us to leave the sequencer
1015                  * running in the common case of command completes
1016                  * without error.  The sequencer will already have
1017                  * dma'd the SCB back up to us, so we can reference
1018                  * the in kernel copy directly.
1019                  */
1020                 scb_index = ahc_inb(ahc, SCB_TAG);
1021                 scb = ahc_lookup_scb(ahc, scb_index);
1022                 if (scb == NULL) {
1023                         ahc_print_devinfo(ahc, &devinfo);
1024                         printf("ahc_intr - referenced scb "
1025                                "not valid during seqint 0x%x scb(%d)\n",
1026                                intstat, scb_index);
1027                         ahc_dump_card_state(ahc);
1028                         panic("for safety");
1029                         goto unpause;
1030                 }
1031
1032                 hscb = scb->hscb;
1033
1034                 /* Don't want to clobber the original sense code */
1035                 if ((scb->flags & SCB_SENSE) != 0) {
1036                         /*
1037                          * Clear the SCB_SENSE Flag and have
1038                          * the sequencer do a normal command
1039                          * complete.
1040                          */
1041                         scb->flags &= ~SCB_SENSE;
1042                         ahc_set_transaction_status(scb, CAM_AUTOSENSE_FAIL);
1043                         break;
1044                 }
1045                 ahc_set_transaction_status(scb, CAM_SCSI_STATUS_ERROR);
1046                 /* Freeze the queue until the client sees the error. */
1047                 ahc_freeze_devq(ahc, scb);
1048                 ahc_freeze_scb(scb);
1049                 ahc_set_scsi_status(scb, hscb->shared_data.status.scsi_status);
1050                 switch (hscb->shared_data.status.scsi_status) {
1051                 case SCSI_STATUS_OK:
1052                         printf("%s: Interrupted for staus of 0???\n",
1053                                ahc_name(ahc));
1054                         break;
1055                 case SCSI_STATUS_CMD_TERMINATED:
1056                 case SCSI_STATUS_CHECK_COND:
1057                 {
1058                         struct ahc_dma_seg *sg;
1059                         struct scsi_sense *sc;
1060                         struct ahc_initiator_tinfo *targ_info;
1061                         struct ahc_tmode_tstate *tstate;
1062                         struct ahc_transinfo *tinfo;
1063 #ifdef AHC_DEBUG
1064                         if (ahc_debug & AHC_SHOW_SENSE) {
1065                                 ahc_print_path(ahc, scb);
1066                                 printf("SCB %d: requests Check Status\n",
1067                                        scb->hscb->tag);
1068                         }
1069 #endif
1070
1071                         if (ahc_perform_autosense(scb) == 0)
1072                                 break;
1073
1074                         targ_info = ahc_fetch_transinfo(ahc,
1075                                                         devinfo.channel,
1076                                                         devinfo.our_scsiid,
1077                                                         devinfo.target,
1078                                                         &tstate);
1079                         tinfo = &targ_info->curr;
1080                         sg = scb->sg_list;
1081                         sc = (struct scsi_sense *)(&hscb->shared_data.cdb);
1082                         /*
1083                          * Save off the residual if there is one.
1084                          */
1085                         ahc_update_residual(ahc, scb);
1086 #ifdef AHC_DEBUG
1087                         if (ahc_debug & AHC_SHOW_SENSE) {
1088                                 ahc_print_path(ahc, scb);
1089                                 printf("Sending Sense\n");
1090                         }
1091 #endif
1092                         sg->addr = ahc_get_sense_bufaddr(ahc, scb);
1093                         sg->len = ahc_get_sense_bufsize(ahc, scb);
1094                         sg->len |= AHC_DMA_LAST_SEG;
1095
1096                         /* Fixup byte order */
1097                         sg->addr = ahc_htole32(sg->addr);
1098                         sg->len = ahc_htole32(sg->len);
1099
1100                         sc->opcode = REQUEST_SENSE;
1101                         sc->byte2 = 0;
1102                         if (tinfo->protocol_version <= SCSI_REV_2
1103                          && SCB_GET_LUN(scb) < 8)
1104                                 sc->byte2 = SCB_GET_LUN(scb) << 5;
1105                         sc->unused[0] = 0;
1106                         sc->unused[1] = 0;
1107                         sc->length = sg->len;
1108                         sc->control = 0;
1109
1110                         /*
1111                          * We can't allow the target to disconnect.
1112                          * This will be an untagged transaction and
1113                          * having the target disconnect will make this
1114                          * transaction indestinguishable from outstanding
1115                          * tagged transactions.
1116                          */
1117                         hscb->control = 0;
1118
1119                         /*
1120                          * This request sense could be because the
1121                          * the device lost power or in some other
1122                          * way has lost our transfer negotiations.
1123                          * Renegotiate if appropriate.  Unit attention
1124                          * errors will be reported before any data
1125                          * phases occur.
1126                          */
1127                         if (ahc_get_residual(scb)
1128                          == ahc_get_transfer_length(scb)) {
1129                                 ahc_update_neg_request(ahc, &devinfo,
1130                                                        tstate, targ_info,
1131                                                        AHC_NEG_IF_NON_ASYNC);
1132                         }
1133                         if (tstate->auto_negotiate & devinfo.target_mask) {
1134                                 hscb->control |= MK_MESSAGE;
1135                                 scb->flags &= ~SCB_NEGOTIATE;
1136                                 scb->flags |= SCB_AUTO_NEGOTIATE;
1137                         }
1138                         hscb->cdb_len = sizeof(*sc);
1139                         hscb->dataptr = sg->addr;
1140                         hscb->datacnt = sg->len;
1141                         hscb->sgptr = scb->sg_list_phys | SG_FULL_RESID;
1142                         hscb->sgptr = ahc_htole32(hscb->sgptr);
1143                         scb->sg_count = 1;
1144                         scb->flags |= SCB_SENSE;
1145                         ahc_qinfifo_requeue_tail(ahc, scb);
1146                         ahc_outb(ahc, RETURN_1, SEND_SENSE);
1147                         /*
1148                          * Ensure we have enough time to actually
1149                          * retrieve the sense.
1150                          */
1151                         ahc_scb_timer_reset(scb, 5 * 1000000);
1152                         break;
1153                 }
1154                 default:
1155                         break;
1156                 }
1157                 break;
1158         }
1159         case NO_MATCH:
1160         {
1161                 /* Ensure we don't leave the selection hardware on */
1162                 ahc_outb(ahc, SCSISEQ,
1163                          ahc_inb(ahc, SCSISEQ) & (ENSELI|ENRSELI|ENAUTOATNP));
1164
1165                 printf("%s:%c:%d: no active SCB for reconnecting "
1166                        "target - issuing BUS DEVICE RESET\n",
1167                        ahc_name(ahc), devinfo.channel, devinfo.target);
1168                 printf("SAVED_SCSIID == 0x%x, SAVED_LUN == 0x%x, "
1169                        "ARG_1 == 0x%x ACCUM = 0x%x\n",
1170                        ahc_inb(ahc, SAVED_SCSIID), ahc_inb(ahc, SAVED_LUN),
1171                        ahc_inb(ahc, ARG_1), ahc_inb(ahc, ACCUM));
1172                 printf("SEQ_FLAGS == 0x%x, SCBPTR == 0x%x, BTT == 0x%x, "
1173                        "SINDEX == 0x%x\n",
1174                        ahc_inb(ahc, SEQ_FLAGS), ahc_inb(ahc, SCBPTR),
1175                        ahc_index_busy_tcl(ahc,
1176                             BUILD_TCL(ahc_inb(ahc, SAVED_SCSIID),
1177                                       ahc_inb(ahc, SAVED_LUN))),
1178                        ahc_inb(ahc, SINDEX));
1179                 printf("SCSIID == 0x%x, SCB_SCSIID == 0x%x, SCB_LUN == 0x%x, "
1180                        "SCB_TAG == 0x%x, SCB_CONTROL == 0x%x\n",
1181                        ahc_inb(ahc, SCSIID), ahc_inb(ahc, SCB_SCSIID),
1182                        ahc_inb(ahc, SCB_LUN), ahc_inb(ahc, SCB_TAG),
1183                        ahc_inb(ahc, SCB_CONTROL));
1184                 printf("SCSIBUSL == 0x%x, SCSISIGI == 0x%x\n",
1185                        ahc_inb(ahc, SCSIBUSL), ahc_inb(ahc, SCSISIGI));
1186                 printf("SXFRCTL0 == 0x%x\n", ahc_inb(ahc, SXFRCTL0));
1187                 printf("SEQCTL == 0x%x\n", ahc_inb(ahc, SEQCTL));
1188                 ahc_dump_card_state(ahc);
1189                 ahc->msgout_buf[0] = MSG_BUS_DEV_RESET;
1190                 ahc->msgout_len = 1;
1191                 ahc->msgout_index = 0;
1192                 ahc->msg_type = MSG_TYPE_INITIATOR_MSGOUT;
1193                 ahc_outb(ahc, MSG_OUT, HOST_MSG);
1194                 ahc_assert_atn(ahc);
1195                 break;
1196         }
1197         case SEND_REJECT:
1198         {
1199                 u_int rejbyte = ahc_inb(ahc, ACCUM);
1200                 printf("%s:%c:%d: Warning - unknown message received from "
1201                        "target (0x%x).  Rejecting\n",
1202                        ahc_name(ahc), devinfo.channel, devinfo.target, rejbyte);
1203                 break;
1204         }
1205         case PROTO_VIOLATION:
1206         {
1207                 ahc_handle_proto_violation(ahc);
1208                 break;
1209         }
1210         case IGN_WIDE_RES:
1211                 ahc_handle_ign_wide_residue(ahc, &devinfo);
1212                 break;
1213         case PDATA_REINIT:
1214                 ahc_reinitialize_dataptrs(ahc);
1215                 break;
1216         case BAD_PHASE:
1217         {
1218                 u_int lastphase;
1219
1220                 lastphase = ahc_inb(ahc, LASTPHASE);
1221                 printf("%s:%c:%d: unknown scsi bus phase %x, "
1222                        "lastphase = 0x%x.  Attempting to continue\n",
1223                        ahc_name(ahc), devinfo.channel, devinfo.target,
1224                        lastphase, ahc_inb(ahc, SCSISIGI));
1225                 break;
1226         }
1227         case MISSED_BUSFREE:
1228         {
1229                 u_int lastphase;
1230
1231                 lastphase = ahc_inb(ahc, LASTPHASE);
1232                 printf("%s:%c:%d: Missed busfree. "
1233                        "Lastphase = 0x%x, Curphase = 0x%x\n",
1234                        ahc_name(ahc), devinfo.channel, devinfo.target,
1235                        lastphase, ahc_inb(ahc, SCSISIGI));
1236                 ahc_restart(ahc);
1237                 return;
1238         }
1239         case HOST_MSG_LOOP:
1240         {
1241                 /*
1242                  * The sequencer has encountered a message phase
1243                  * that requires host assistance for completion.
1244                  * While handling the message phase(s), we will be
1245                  * notified by the sequencer after each byte is
1246                  * transfered so we can track bus phase changes.
1247                  *
1248                  * If this is the first time we've seen a HOST_MSG_LOOP
1249                  * interrupt, initialize the state of the host message
1250                  * loop.
1251                  */
1252                 if (ahc->msg_type == MSG_TYPE_NONE) {
1253                         struct scb *scb;
1254                         u_int scb_index;
1255                         u_int bus_phase;
1256
1257                         bus_phase = ahc_inb(ahc, SCSISIGI) & PHASE_MASK;
1258                         if (bus_phase != P_MESGIN
1259                          && bus_phase != P_MESGOUT) {
1260                                 printf("ahc_intr: HOST_MSG_LOOP bad "
1261                                        "phase 0x%x\n",
1262                                       bus_phase);
1263                                 /*
1264                                  * Probably transitioned to bus free before
1265                                  * we got here.  Just punt the message.
1266                                  */
1267                                 ahc_clear_intstat(ahc);
1268                                 ahc_restart(ahc);
1269                                 return;
1270                         }
1271
1272                         scb_index = ahc_inb(ahc, SCB_TAG);
1273                         scb = ahc_lookup_scb(ahc, scb_index);
1274                         if (devinfo.role == ROLE_INITIATOR) {
1275                                 if (bus_phase == P_MESGOUT) {
1276                                         if (scb == NULL)
1277                                                 panic("HOST_MSG_LOOP with "
1278                                                       "invalid SCB %x\n",
1279                                                       scb_index);
1280
1281                                         ahc_setup_initiator_msgout(ahc,
1282                                                                    &devinfo,
1283                                                                    scb);
1284                                 } else {
1285                                         ahc->msg_type =
1286                                             MSG_TYPE_INITIATOR_MSGIN;
1287                                         ahc->msgin_index = 0;
1288                                 }
1289                         }
1290 #ifdef AHC_TARGET_MODE
1291                         else {
1292                                 if (bus_phase == P_MESGOUT) {
1293                                         ahc->msg_type =
1294                                             MSG_TYPE_TARGET_MSGOUT;
1295                                         ahc->msgin_index = 0;
1296                                 }
1297                                 else
1298                                         ahc_setup_target_msgin(ahc,
1299                                                                &devinfo,
1300                                                                scb);
1301                         }
1302 #endif
1303                 }
1304
1305                 ahc_handle_message_phase(ahc);
1306                 break;
1307         }
1308         case PERR_DETECTED:
1309         {
1310                 /*
1311                  * If we've cleared the parity error interrupt
1312                  * but the sequencer still believes that SCSIPERR
1313                  * is true, it must be that the parity error is
1314                  * for the currently presented byte on the bus,
1315                  * and we are not in a phase (data-in) where we will
1316                  * eventually ack this byte.  Ack the byte and
1317                  * throw it away in the hope that the target will
1318                  * take us to message out to deliver the appropriate
1319                  * error message.
1320                  */
1321                 if ((intstat & SCSIINT) == 0
1322                  && (ahc_inb(ahc, SSTAT1) & SCSIPERR) != 0) {
1323
1324                         if ((ahc->features & AHC_DT) == 0) {
1325                                 u_int curphase;
1326
1327                                 /*
1328                                  * The hardware will only let you ack bytes
1329                                  * if the expected phase in SCSISIGO matches
1330                                  * the current phase.  Make sure this is
1331                                  * currently the case.
1332                                  */
1333                                 curphase = ahc_inb(ahc, SCSISIGI) & PHASE_MASK;
1334                                 ahc_outb(ahc, LASTPHASE, curphase);
1335                                 ahc_outb(ahc, SCSISIGO, curphase);
1336                         }
1337                         if ((ahc_inb(ahc, SCSISIGI) & (CDI|MSGI)) == 0) {
1338                                 int wait;
1339
1340                                 /*
1341                                  * In a data phase.  Faster to bitbucket
1342                                  * the data than to individually ack each
1343                                  * byte.  This is also the only strategy
1344                                  * that will work with AUTOACK enabled.
1345                                  */
1346                                 ahc_outb(ahc, SXFRCTL1,
1347                                          ahc_inb(ahc, SXFRCTL1) | BITBUCKET);
1348                                 wait = 5000;
1349                                 while (--wait != 0) {
1350                                         if ((ahc_inb(ahc, SCSISIGI)
1351                                           & (CDI|MSGI)) != 0)
1352                                                 break;
1353                                         ahc_delay(100);
1354                                 }
1355                                 ahc_outb(ahc, SXFRCTL1,
1356                                          ahc_inb(ahc, SXFRCTL1) & ~BITBUCKET);
1357                                 if (wait == 0) {
1358                                         struct  scb *scb;
1359                                         u_int   scb_index;
1360
1361                                         ahc_print_devinfo(ahc, &devinfo);
1362                                         printf("Unable to clear parity error.  "
1363                                                "Resetting bus.\n");
1364                                         scb_index = ahc_inb(ahc, SCB_TAG);
1365                                         scb = ahc_lookup_scb(ahc, scb_index);
1366                                         if (scb != NULL)
1367                                                 ahc_set_transaction_status(scb,
1368                                                     CAM_UNCOR_PARITY);
1369                                         ahc_reset_channel(ahc, devinfo.channel,
1370                                                           /*init reset*/TRUE);
1371                                 }
1372                         } else {
1373                                 ahc_inb(ahc, SCSIDATL);
1374                         }
1375                 }
1376                 break;
1377         }
1378         case DATA_OVERRUN:
1379         {
1380                 /*
1381                  * When the sequencer detects an overrun, it
1382                  * places the controller in "BITBUCKET" mode
1383                  * and allows the target to complete its transfer.
1384                  * Unfortunately, none of the counters get updated
1385                  * when the controller is in this mode, so we have
1386                  * no way of knowing how large the overrun was.
1387                  */
1388                 u_int scbindex = ahc_inb(ahc, SCB_TAG);
1389                 u_int lastphase = ahc_inb(ahc, LASTPHASE);
1390                 u_int i;
1391
1392                 scb = ahc_lookup_scb(ahc, scbindex);
1393                 for (i = 0; i < num_phases; i++) {
1394                         if (lastphase == ahc_phase_table[i].phase)
1395                                 break;
1396                 }
1397                 ahc_print_path(ahc, scb);
1398                 printf("data overrun detected %s."
1399                        "  Tag == 0x%x.\n",
1400                        ahc_phase_table[i].phasemsg,
1401                        scb->hscb->tag);
1402                 ahc_print_path(ahc, scb);
1403                 printf("%s seen Data Phase.  Length = %ld.  NumSGs = %d.\n",
1404                        ahc_inb(ahc, SEQ_FLAGS) & DPHASE ? "Have" : "Haven't",
1405                        ahc_get_transfer_length(scb), scb->sg_count);
1406                 if (scb->sg_count > 0) {
1407                         for (i = 0; i < scb->sg_count; i++) {
1408
1409                                 printf("sg[%d] - Addr 0x%x%x : Length %d\n",
1410                                        i,
1411                                        (ahc_le32toh(scb->sg_list[i].len) >> 24
1412                                         & SG_HIGH_ADDR_BITS),
1413                                        ahc_le32toh(scb->sg_list[i].addr),
1414                                        ahc_le32toh(scb->sg_list[i].len)
1415                                        & AHC_SG_LEN_MASK);
1416                         }
1417                 }
1418                 /*
1419                  * Set this and it will take effect when the
1420                  * target does a command complete.
1421                  */
1422                 ahc_freeze_devq(ahc, scb);
1423                 if ((scb->flags & SCB_SENSE) == 0) {
1424                         ahc_set_transaction_status(scb, CAM_DATA_RUN_ERR);
1425                 } else {
1426                         scb->flags &= ~SCB_SENSE;
1427                         ahc_set_transaction_status(scb, CAM_AUTOSENSE_FAIL);
1428                 }
1429                 ahc_freeze_scb(scb);
1430
1431                 if ((ahc->features & AHC_ULTRA2) != 0) {
1432                         /*
1433                          * Clear the channel in case we return
1434                          * to data phase later.
1435                          */
1436                         ahc_outb(ahc, SXFRCTL0,
1437                                  ahc_inb(ahc, SXFRCTL0) | CLRSTCNT|CLRCHN);
1438                         ahc_outb(ahc, SXFRCTL0,
1439                                  ahc_inb(ahc, SXFRCTL0) | CLRSTCNT|CLRCHN);
1440                 }
1441                 if ((ahc->flags & AHC_39BIT_ADDRESSING) != 0) {
1442                         u_int dscommand1;
1443
1444                         /* Ensure HHADDR is 0 for future DMA operations. */
1445                         dscommand1 = ahc_inb(ahc, DSCOMMAND1);
1446                         ahc_outb(ahc, DSCOMMAND1, dscommand1 | HADDLDSEL0);
1447                         ahc_outb(ahc, HADDR, 0);
1448                         ahc_outb(ahc, DSCOMMAND1, dscommand1);
1449                 }
1450                 break;
1451         }
1452         case MKMSG_FAILED:
1453         {
1454                 u_int scbindex;
1455
1456                 printf("%s:%c:%d:%d: Attempt to issue message failed\n",
1457                        ahc_name(ahc), devinfo.channel, devinfo.target,
1458                        devinfo.lun);
1459                 scbindex = ahc_inb(ahc, SCB_TAG);
1460                 scb = ahc_lookup_scb(ahc, scbindex);
1461                 if (scb != NULL
1462                  && (scb->flags & SCB_RECOVERY_SCB) != 0)
1463                         /*
1464                          * Ensure that we didn't put a second instance of this
1465                          * SCB into the QINFIFO.
1466                          */
1467                         ahc_search_qinfifo(ahc, SCB_GET_TARGET(ahc, scb),
1468                                            SCB_GET_CHANNEL(ahc, scb),
1469                                            SCB_GET_LUN(scb), scb->hscb->tag,
1470                                            ROLE_INITIATOR, /*status*/0,
1471                                            SEARCH_REMOVE);
1472                 break;
1473         }
1474         case NO_FREE_SCB:
1475         {
1476                 printf("%s: No free or disconnected SCBs\n", ahc_name(ahc));
1477                 ahc_dump_card_state(ahc);
1478                 panic("for safety");
1479                 break;
1480         }
1481         case SCB_MISMATCH:
1482         {
1483                 u_int scbptr;
1484
1485                 scbptr = ahc_inb(ahc, SCBPTR);
1486                 printf("Bogus TAG after DMA.  SCBPTR %d, tag %d, our tag %d\n",
1487                        scbptr, ahc_inb(ahc, ARG_1),
1488                        ahc->scb_data->hscbs[scbptr].tag);
1489                 ahc_dump_card_state(ahc);
1490                 panic("for saftey");
1491                 break;
1492         }
1493         case OUT_OF_RANGE:
1494         {
1495                 printf("%s: BTT calculation out of range\n", ahc_name(ahc));
1496                 printf("SAVED_SCSIID == 0x%x, SAVED_LUN == 0x%x, "
1497                        "ARG_1 == 0x%x ACCUM = 0x%x\n",
1498                        ahc_inb(ahc, SAVED_SCSIID), ahc_inb(ahc, SAVED_LUN),
1499                        ahc_inb(ahc, ARG_1), ahc_inb(ahc, ACCUM));
1500                 printf("SEQ_FLAGS == 0x%x, SCBPTR == 0x%x, BTT == 0x%x, "
1501                        "SINDEX == 0x%x\n, A == 0x%x\n",
1502                        ahc_inb(ahc, SEQ_FLAGS), ahc_inb(ahc, SCBPTR),
1503                        ahc_index_busy_tcl(ahc,
1504                             BUILD_TCL(ahc_inb(ahc, SAVED_SCSIID),
1505                                       ahc_inb(ahc, SAVED_LUN))),
1506                        ahc_inb(ahc, SINDEX),
1507                        ahc_inb(ahc, ACCUM));
1508                 printf("SCSIID == 0x%x, SCB_SCSIID == 0x%x, SCB_LUN == 0x%x, "
1509                        "SCB_TAG == 0x%x, SCB_CONTROL == 0x%x\n",
1510                        ahc_inb(ahc, SCSIID), ahc_inb(ahc, SCB_SCSIID),
1511                        ahc_inb(ahc, SCB_LUN), ahc_inb(ahc, SCB_TAG),
1512                        ahc_inb(ahc, SCB_CONTROL));
1513                 printf("SCSIBUSL == 0x%x, SCSISIGI == 0x%x\n",
1514                        ahc_inb(ahc, SCSIBUSL), ahc_inb(ahc, SCSISIGI));
1515                 ahc_dump_card_state(ahc);
1516                 panic("for safety");
1517                 break;
1518         }
1519         default:
1520                 printf("ahc_intr: seqint, "
1521                        "intstat == 0x%x, scsisigi = 0x%x\n",
1522                        intstat, ahc_inb(ahc, SCSISIGI));
1523                 break;
1524         }
1525 unpause:
1526         /*
1527          *  The sequencer is paused immediately on
1528          *  a SEQINT, so we should restart it when
1529          *  we're done.
1530          */
1531         ahc_unpause(ahc);
1532 }
1533
1534 static void
1535 ahc_handle_scsiint(struct ahc_softc *ahc, u_int intstat)
1536 {
1537         u_int   scb_index;
1538         u_int   status0;
1539         u_int   status;
1540         struct  scb *scb;
1541         char    cur_channel;
1542         char    intr_channel;
1543
1544         if ((ahc->features & AHC_TWIN) != 0
1545          && ((ahc_inb(ahc, SBLKCTL) & SELBUSB) != 0))
1546                 cur_channel = 'B';
1547         else
1548                 cur_channel = 'A';
1549         intr_channel = cur_channel;
1550
1551         if ((ahc->features & AHC_ULTRA2) != 0)
1552                 status0 = ahc_inb(ahc, SSTAT0) & IOERR;
1553         else
1554                 status0 = 0;
1555         status = ahc_inb(ahc, SSTAT1) & (SELTO|SCSIRSTI|BUSFREE|SCSIPERR);
1556         if (status == 0 && status0 == 0) {
1557                 if ((ahc->features & AHC_TWIN) != 0) {
1558                         /* Try the other channel */
1559                         ahc_outb(ahc, SBLKCTL, ahc_inb(ahc, SBLKCTL) ^ SELBUSB);
1560                         status = ahc_inb(ahc, SSTAT1)
1561                                & (SELTO|SCSIRSTI|BUSFREE|SCSIPERR);
1562                         intr_channel = (cur_channel == 'A') ? 'B' : 'A';
1563                 }
1564                 if (status == 0) {
1565                         printf("%s: Spurious SCSI interrupt\n", ahc_name(ahc));
1566                         ahc_outb(ahc, CLRINT, CLRSCSIINT);
1567                         ahc_unpause(ahc);
1568                         return;
1569                 }
1570         }
1571
1572         /* Make sure the sequencer is in a safe location. */
1573         ahc_clear_critical_section(ahc);
1574
1575         scb_index = ahc_inb(ahc, SCB_TAG);
1576         scb = ahc_lookup_scb(ahc, scb_index);
1577         if (scb != NULL
1578          && (ahc_inb(ahc, SEQ_FLAGS) & NOT_IDENTIFIED) != 0)
1579                 scb = NULL;
1580
1581         if ((ahc->features & AHC_ULTRA2) != 0
1582          && (status0 & IOERR) != 0) {
1583                 int now_lvd;
1584
1585                 now_lvd = ahc_inb(ahc, SBLKCTL) & ENAB40;
1586                 printf("%s: Transceiver State Has Changed to %s mode\n",
1587                        ahc_name(ahc), now_lvd ? "LVD" : "SE");
1588                 ahc_outb(ahc, CLRSINT0, CLRIOERR);
1589                 /*
1590                  * When transitioning to SE mode, the reset line
1591                  * glitches, triggering an arbitration bug in some
1592                  * Ultra2 controllers.  This bug is cleared when we
1593                  * assert the reset line.  Since a reset glitch has
1594                  * already occurred with this transition and a
1595                  * transceiver state change is handled just like
1596                  * a bus reset anyway, asserting the reset line
1597                  * ourselves is safe.
1598                  */
1599                 ahc_reset_channel(ahc, intr_channel,
1600                                  /*Initiate Reset*/now_lvd == 0);
1601         } else if ((status & SCSIRSTI) != 0) {
1602                 printf("%s: Someone reset channel %c\n",
1603                         ahc_name(ahc), intr_channel);
1604                 if (intr_channel != cur_channel)
1605                         ahc_outb(ahc, SBLKCTL, ahc_inb(ahc, SBLKCTL) ^ SELBUSB);
1606                 ahc_reset_channel(ahc, intr_channel, /*Initiate Reset*/FALSE);
1607         } else if ((status & SCSIPERR) != 0) {
1608                 /*
1609                  * Determine the bus phase and queue an appropriate message.
1610                  * SCSIPERR is latched true as soon as a parity error
1611                  * occurs.  If the sequencer acked the transfer that
1612                  * caused the parity error and the currently presented
1613                  * transfer on the bus has correct parity, SCSIPERR will
1614                  * be cleared by CLRSCSIPERR.  Use this to determine if
1615                  * we should look at the last phase the sequencer recorded,
1616                  * or the current phase presented on the bus.
1617                  */
1618                 struct  ahc_devinfo devinfo;
1619                 u_int   mesg_out;
1620                 u_int   curphase;
1621                 u_int   errorphase;
1622                 u_int   lastphase;
1623                 u_int   scsirate;
1624                 u_int   i;
1625                 u_int   sstat2;
1626                 int     silent;
1627
1628                 lastphase = ahc_inb(ahc, LASTPHASE);
1629                 curphase = ahc_inb(ahc, SCSISIGI) & PHASE_MASK;
1630                 sstat2 = ahc_inb(ahc, SSTAT2);
1631                 ahc_outb(ahc, CLRSINT1, CLRSCSIPERR);
1632                 /*
1633                  * For all phases save DATA, the sequencer won't
1634                  * automatically ack a byte that has a parity error
1635                  * in it.  So the only way that the current phase
1636                  * could be 'data-in' is if the parity error is for
1637                  * an already acked byte in the data phase.  During
1638                  * synchronous data-in transfers, we may actually
1639                  * ack bytes before latching the current phase in
1640                  * LASTPHASE, leading to the discrepancy between
1641                  * curphase and lastphase.
1642                  */
1643                 if ((ahc_inb(ahc, SSTAT1) & SCSIPERR) != 0
1644                  || curphase == P_DATAIN || curphase == P_DATAIN_DT)
1645                         errorphase = curphase;
1646                 else
1647                         errorphase = lastphase;
1648
1649                 for (i = 0; i < num_phases; i++) {
1650                         if (errorphase == ahc_phase_table[i].phase)
1651                                 break;
1652                 }
1653                 mesg_out = ahc_phase_table[i].mesg_out;
1654                 silent = FALSE;
1655                 if (scb != NULL) {
1656                         if (SCB_IS_SILENT(scb))
1657                                 silent = TRUE;
1658                         else
1659                                 ahc_print_path(ahc, scb);
1660                         scb->flags |= SCB_TRANSMISSION_ERROR;
1661                 } else
1662                         printf("%s:%c:%d: ", ahc_name(ahc), intr_channel,
1663                                SCSIID_TARGET(ahc, ahc_inb(ahc, SAVED_SCSIID)));
1664                 scsirate = ahc_inb(ahc, SCSIRATE);
1665                 if (silent == FALSE) {
1666                         printf("parity error detected %s. "
1667                                "SEQADDR(0x%x) SCSIRATE(0x%x)\n",
1668                                ahc_phase_table[i].phasemsg,
1669                                ahc_inw(ahc, SEQADDR0),
1670                                scsirate);
1671                         if ((ahc->features & AHC_DT) != 0) {
1672                                 if ((sstat2 & CRCVALERR) != 0)
1673                                         printf("\tCRC Value Mismatch\n");
1674                                 if ((sstat2 & CRCENDERR) != 0)
1675                                         printf("\tNo terminal CRC packet "
1676                                                "recevied\n");
1677                                 if ((sstat2 & CRCREQERR) != 0)
1678                                         printf("\tIllegal CRC packet "
1679                                                "request\n");
1680                                 if ((sstat2 & DUAL_EDGE_ERR) != 0)
1681                                         printf("\tUnexpected %sDT Data Phase\n",
1682                                                (scsirate & SINGLE_EDGE)
1683                                              ? "" : "non-");
1684                         }
1685                 }
1686
1687                 if ((ahc->features & AHC_DT) != 0
1688                  && (sstat2 & DUAL_EDGE_ERR) != 0) {
1689                         /*
1690                          * This error applies regardless of
1691                          * data direction, so ignore the value
1692                          * in the phase table.
1693                          */
1694                         mesg_out = MSG_INITIATOR_DET_ERR;
1695                 }
1696
1697                 /*
1698                  * We've set the hardware to assert ATN if we
1699                  * get a parity error on "in" phases, so all we
1700                  * need to do is stuff the message buffer with
1701                  * the appropriate message.  "In" phases have set
1702                  * mesg_out to something other than MSG_NOP.
1703                  */
1704                 if (mesg_out != MSG_NOOP) {
1705                         if (ahc->msg_type != MSG_TYPE_NONE)
1706                                 ahc->send_msg_perror = TRUE;
1707                         else
1708                                 ahc_outb(ahc, MSG_OUT, mesg_out);
1709                 }
1710                 /*
1711                  * Force a renegotiation with this target just in
1712                  * case we are out of sync for some external reason
1713                  * unknown (or unreported) by the target.
1714                  */
1715                 ahc_fetch_devinfo(ahc, &devinfo);
1716                 ahc_force_renegotiation(ahc, &devinfo);
1717
1718                 ahc_outb(ahc, CLRINT, CLRSCSIINT);
1719                 ahc_unpause(ahc);
1720         } else if ((status & SELTO) != 0) {
1721                 u_int   scbptr;
1722
1723                 /* Stop the selection */
1724                 ahc_outb(ahc, SCSISEQ, 0);
1725
1726                 /* No more pending messages */
1727                 ahc_clear_msg_state(ahc);
1728
1729                 /* Clear interrupt state */
1730                 ahc_outb(ahc, SIMODE1, ahc_inb(ahc, SIMODE1) & ~ENBUSFREE);
1731                 ahc_outb(ahc, CLRSINT1, CLRSELTIMEO|CLRBUSFREE|CLRSCSIPERR);
1732
1733                 /*
1734                  * Although the driver does not care about the
1735                  * 'Selection in Progress' status bit, the busy
1736                  * LED does.  SELINGO is only cleared by a sucessfull
1737                  * selection, so we must manually clear it to insure
1738                  * the LED turns off just incase no future successful
1739                  * selections occur (e.g. no devices on the bus).
1740                  */
1741                 ahc_outb(ahc, CLRSINT0, CLRSELINGO);
1742
1743                 scbptr = ahc_inb(ahc, WAITING_SCBH);
1744                 ahc_outb(ahc, SCBPTR, scbptr);
1745                 scb_index = ahc_inb(ahc, SCB_TAG);
1746
1747                 scb = ahc_lookup_scb(ahc, scb_index);
1748                 if (scb == NULL) {
1749                         printf("%s: ahc_intr - referenced scb not "
1750                                "valid during SELTO scb(%d, %d)\n",
1751                                ahc_name(ahc), scbptr, scb_index);
1752                         ahc_dump_card_state(ahc);
1753                 } else {
1754                         struct ahc_devinfo devinfo;
1755 #ifdef AHC_DEBUG
1756                         if ((ahc_debug & AHC_SHOW_SELTO) != 0) {
1757                                 ahc_print_path(ahc, scb);
1758                                 printf("Saw Selection Timeout for SCB 0x%x\n",
1759                                        scb_index);
1760                         }
1761 #endif
1762                         ahc_scb_devinfo(ahc, &devinfo, scb);
1763                         ahc_set_transaction_status(scb, CAM_SEL_TIMEOUT);
1764                         ahc_freeze_devq(ahc, scb);
1765
1766                         /*
1767                          * Cancel any pending transactions on the device
1768                          * now that it seems to be missing.  This will
1769                          * also revert us to async/narrow transfers until
1770                          * we can renegotiate with the device.
1771                          */
1772                         ahc_handle_devreset(ahc, &devinfo,
1773                                             CAM_SEL_TIMEOUT,
1774                                             "Selection Timeout",
1775                                             /*verbose_level*/1);
1776                 }
1777                 ahc_outb(ahc, CLRINT, CLRSCSIINT);
1778                 ahc_restart(ahc);
1779         } else if ((status & BUSFREE) != 0
1780                 && (ahc_inb(ahc, SIMODE1) & ENBUSFREE) != 0) {
1781                 struct  ahc_devinfo devinfo;
1782                 u_int   lastphase;
1783                 u_int   saved_scsiid;
1784                 u_int   saved_lun;
1785                 u_int   target;
1786                 u_int   initiator_role_id;
1787                 char    channel;
1788                 int     printerror;
1789
1790                 /*
1791                  * Clear our selection hardware as soon as possible.
1792                  * We may have an entry in the waiting Q for this target,
1793                  * that is affected by this busfree and we don't want to
1794                  * go about selecting the target while we handle the event.
1795                  */
1796                 ahc_outb(ahc, SCSISEQ,
1797                          ahc_inb(ahc, SCSISEQ) & (ENSELI|ENRSELI|ENAUTOATNP));
1798
1799                 /*
1800                  * Disable busfree interrupts and clear the busfree
1801                  * interrupt status.  We do this here so that several
1802                  * bus transactions occur prior to clearing the SCSIINT
1803                  * latch.  It can take a bit for the clearing to take effect.
1804                  */
1805                 ahc_outb(ahc, SIMODE1, ahc_inb(ahc, SIMODE1) & ~ENBUSFREE);
1806                 ahc_outb(ahc, CLRSINT1, CLRBUSFREE|CLRSCSIPERR);
1807
1808                 /*
1809                  * Look at what phase we were last in.
1810                  * If its message out, chances are pretty good
1811                  * that the busfree was in response to one of
1812                  * our abort requests.
1813                  */
1814                 lastphase = ahc_inb(ahc, LASTPHASE);
1815                 saved_scsiid = ahc_inb(ahc, SAVED_SCSIID);
1816                 saved_lun = ahc_inb(ahc, SAVED_LUN);
1817                 target = SCSIID_TARGET(ahc, saved_scsiid);
1818                 initiator_role_id = SCSIID_OUR_ID(saved_scsiid);
1819                 channel = SCSIID_CHANNEL(ahc, saved_scsiid);
1820                 ahc_compile_devinfo(&devinfo, initiator_role_id,
1821                                     target, saved_lun, channel, ROLE_INITIATOR);
1822                 printerror = 1;
1823
1824                 if (lastphase == P_MESGOUT) {
1825                         u_int tag;
1826
1827                         tag = SCB_LIST_NULL;
1828                         if (ahc_sent_msg(ahc, AHCMSG_1B, MSG_ABORT_TAG, TRUE)
1829                          || ahc_sent_msg(ahc, AHCMSG_1B, MSG_ABORT, TRUE)) {
1830                                 if (ahc->msgout_buf[ahc->msgout_index - 1]
1831                                  == MSG_ABORT_TAG)
1832                                         tag = scb->hscb->tag;
1833                                 ahc_print_path(ahc, scb);
1834                                 printf("SCB %d - Abort%s Completed.\n",
1835                                        scb->hscb->tag, tag == SCB_LIST_NULL ?
1836                                        "" : " Tag");
1837                                 ahc_abort_scbs(ahc, target, channel,
1838                                                saved_lun, tag,
1839                                                ROLE_INITIATOR,
1840                                                CAM_REQ_ABORTED);
1841                                 printerror = 0;
1842                         } else if (ahc_sent_msg(ahc, AHCMSG_1B,
1843                                                 MSG_BUS_DEV_RESET, TRUE)) {
1844 #ifdef __FreeBSD__
1845                                 /*
1846                                  * Don't mark the user's request for this BDR
1847                                  * as completing with CAM_BDR_SENT.  CAM3
1848                                  * specifies CAM_REQ_CMP.
1849                                  */
1850                                 if (scb != NULL
1851                                  && scb->io_ctx->ccb_h.func_code== XPT_RESET_DEV
1852                                  && ahc_match_scb(ahc, scb, target, channel,
1853                                                   CAM_LUN_WILDCARD,
1854                                                   SCB_LIST_NULL,
1855                                                   ROLE_INITIATOR)) {
1856                                         ahc_set_transaction_status(scb, CAM_REQ_CMP);
1857                                 }
1858 #endif
1859                                 ahc_compile_devinfo(&devinfo,
1860                                                     initiator_role_id,
1861                                                     target,
1862                                                     CAM_LUN_WILDCARD,
1863                                                     channel,
1864                                                     ROLE_INITIATOR);
1865                                 ahc_handle_devreset(ahc, &devinfo,
1866                                                     CAM_BDR_SENT,
1867                                                     "Bus Device Reset",
1868                                                     /*verbose_level*/0);
1869                                 printerror = 0;
1870                         } else if (ahc_sent_msg(ahc, AHCMSG_EXT,
1871                                                 MSG_EXT_PPR, FALSE)) {
1872                                 struct ahc_initiator_tinfo *tinfo;
1873                                 struct ahc_tmode_tstate *tstate;
1874
1875                                 /*
1876                                  * PPR Rejected.  Try non-ppr negotiation
1877                                  * and retry command.
1878                                  */
1879                                 tinfo = ahc_fetch_transinfo(ahc,
1880                                                             devinfo.channel,
1881                                                             devinfo.our_scsiid,
1882                                                             devinfo.target,
1883                                                             &tstate);
1884                                 tinfo->curr.transport_version = 2;
1885                                 tinfo->goal.transport_version = 2;
1886                                 tinfo->goal.ppr_options = 0;
1887                                 ahc_qinfifo_requeue_tail(ahc, scb);
1888                                 printerror = 0;
1889                         } else if (ahc_sent_msg(ahc, AHCMSG_EXT,
1890                                                 MSG_EXT_WDTR, FALSE)) {
1891                                 /*
1892                                  * Negotiation Rejected.  Go-narrow and
1893                                  * retry command.
1894                                  */
1895                                 ahc_set_width(ahc, &devinfo,
1896                                               MSG_EXT_WDTR_BUS_8_BIT,
1897                                               AHC_TRANS_CUR|AHC_TRANS_GOAL,
1898                                               /*paused*/TRUE);
1899                                 ahc_qinfifo_requeue_tail(ahc, scb);
1900                                 printerror = 0;
1901                         } else if (ahc_sent_msg(ahc, AHCMSG_EXT,
1902                                                 MSG_EXT_SDTR, FALSE)) {
1903                                 /*
1904                                  * Negotiation Rejected.  Go-async and
1905                                  * retry command.
1906                                  */
1907                                 ahc_set_syncrate(ahc, &devinfo,
1908                                                 /*syncrate*/NULL,
1909                                                 /*period*/0, /*offset*/0,
1910                                                 /*ppr_options*/0,
1911                                                 AHC_TRANS_CUR|AHC_TRANS_GOAL,
1912                                                 /*paused*/TRUE);
1913                                 ahc_qinfifo_requeue_tail(ahc, scb);
1914                                 printerror = 0;
1915                         }
1916                 }
1917                 if (printerror != 0) {
1918                         u_int i;
1919
1920                         if (scb != NULL) {
1921                                 u_int tag;
1922
1923                                 if ((scb->hscb->control & TAG_ENB) != 0)
1924                                         tag = scb->hscb->tag;
1925                                 else
1926                                         tag = SCB_LIST_NULL;
1927                                 ahc_print_path(ahc, scb);
1928                                 ahc_abort_scbs(ahc, target, channel,
1929                                                SCB_GET_LUN(scb), tag,
1930                                                ROLE_INITIATOR,
1931                                                CAM_UNEXP_BUSFREE);
1932                         } else {
1933                                 /*
1934                                  * We had not fully identified this connection,
1935                                  * so we cannot abort anything.
1936                                  */
1937                                 printf("%s: ", ahc_name(ahc));
1938                         }
1939                         for (i = 0; i < num_phases; i++) {
1940                                 if (lastphase == ahc_phase_table[i].phase)
1941                                         break;
1942                         }
1943                         if (lastphase != P_BUSFREE) {
1944                                 /*
1945                                  * Renegotiate with this device at the
1946                                  * next oportunity just in case this busfree
1947                                  * is due to a negotiation mismatch with the
1948                                  * device.
1949                                  */
1950                                 ahc_force_renegotiation(ahc, &devinfo);
1951                         }
1952                         printf("Unexpected busfree %s\n"
1953                                "SEQADDR == 0x%x\n",
1954                                ahc_phase_table[i].phasemsg,
1955                                ahc_inb(ahc, SEQADDR0)
1956                                 | (ahc_inb(ahc, SEQADDR1) << 8));
1957                 }
1958                 ahc_outb(ahc, CLRINT, CLRSCSIINT);
1959                 ahc_restart(ahc);
1960         } else {
1961                 printf("%s: Missing case in ahc_handle_scsiint. status = %x\n",
1962                        ahc_name(ahc), status);
1963                 ahc_outb(ahc, CLRINT, CLRSCSIINT);
1964         }
1965 }
1966
1967 /*
1968  * Force renegotiation to occur the next time we initiate
1969  * a command to the current device.
1970  */
1971 static void
1972 ahc_force_renegotiation(struct ahc_softc *ahc, struct ahc_devinfo *devinfo)
1973 {
1974         struct  ahc_initiator_tinfo *targ_info;
1975         struct  ahc_tmode_tstate *tstate;
1976
1977         targ_info = ahc_fetch_transinfo(ahc,
1978                                         devinfo->channel,
1979                                         devinfo->our_scsiid,
1980                                         devinfo->target,
1981                                         &tstate);
1982         ahc_update_neg_request(ahc, devinfo, tstate,
1983                                targ_info, AHC_NEG_IF_NON_ASYNC);
1984 }
1985
1986 #define AHC_MAX_STEPS 2000
1987 static void
1988 ahc_clear_critical_section(struct ahc_softc *ahc)
1989 {
1990         int     stepping;
1991         int     steps;
1992         u_int   simode0;
1993         u_int   simode1;
1994
1995         if (ahc->num_critical_sections == 0)
1996                 return;
1997
1998         stepping = FALSE;
1999         steps = 0;
2000         simode0 = 0;
2001         simode1 = 0;
2002         for (;;) {
2003                 struct  cs *cs;
2004                 u_int   seqaddr;
2005                 u_int   i;
2006
2007                 seqaddr = ahc_inb(ahc, SEQADDR0)
2008                         | (ahc_inb(ahc, SEQADDR1) << 8);
2009
2010                 /*
2011                  * Seqaddr represents the next instruction to execute,
2012                  * so we are really executing the instruction just
2013                  * before it.
2014                  */
2015                 if (seqaddr != 0)
2016                         seqaddr -= 1;
2017                 cs = ahc->critical_sections;
2018                 for (i = 0; i < ahc->num_critical_sections; i++, cs++) {
2019
2020                         if (cs->begin < seqaddr && cs->end >= seqaddr)
2021                                 break;
2022                 }
2023
2024                 if (i == ahc->num_critical_sections)
2025                         break;
2026
2027                 if (steps > AHC_MAX_STEPS) {
2028                         printf("%s: Infinite loop in critical section\n",
2029                                ahc_name(ahc));
2030                         ahc_dump_card_state(ahc);
2031                         panic("critical section loop");
2032                 }
2033
2034                 steps++;
2035                 if (stepping == FALSE) {
2036
2037                         /*
2038                          * Disable all interrupt sources so that the
2039                          * sequencer will not be stuck by a pausing
2040                          * interrupt condition while we attempt to
2041                          * leave a critical section.
2042                          */
2043                         simode0 = ahc_inb(ahc, SIMODE0);
2044                         ahc_outb(ahc, SIMODE0, 0);
2045                         simode1 = ahc_inb(ahc, SIMODE1);
2046                         if ((ahc->features & AHC_DT) != 0)
2047                                 /*
2048                                  * On DT class controllers, we
2049                                  * use the enhanced busfree logic.
2050                                  * Unfortunately we cannot re-enable
2051                                  * busfree detection within the
2052                                  * current connection, so we must
2053                                  * leave it on while single stepping.
2054                                  */
2055                                 ahc_outb(ahc, SIMODE1, simode1 & ENBUSFREE);
2056                         else
2057                                 ahc_outb(ahc, SIMODE1, 0);
2058                         ahc_outb(ahc, CLRINT, CLRSCSIINT);
2059                         ahc_outb(ahc, SEQCTL, ahc->seqctl | STEP);
2060                         stepping = TRUE;
2061                 }
2062                 if ((ahc->features & AHC_DT) != 0) {
2063                         ahc_outb(ahc, CLRSINT1, CLRBUSFREE);
2064                         ahc_outb(ahc, CLRINT, CLRSCSIINT);
2065                 }
2066                 ahc_outb(ahc, HCNTRL, ahc->unpause);
2067                 while (!ahc_is_paused(ahc))
2068                         ahc_delay(200);
2069         }
2070         if (stepping) {
2071                 ahc_outb(ahc, SIMODE0, simode0);
2072                 ahc_outb(ahc, SIMODE1, simode1);
2073                 ahc_outb(ahc, SEQCTL, ahc->seqctl);
2074         }
2075 }
2076
2077 /*
2078  * Clear any pending interrupt status.
2079  */
2080 static void
2081 ahc_clear_intstat(struct ahc_softc *ahc)
2082 {
2083         /* Clear any interrupt conditions this may have caused */
2084         ahc_outb(ahc, CLRSINT1, CLRSELTIMEO|CLRATNO|CLRSCSIRSTI
2085                                 |CLRBUSFREE|CLRSCSIPERR|CLRPHASECHG|
2086                                 CLRREQINIT);
2087         ahc_flush_device_writes(ahc);
2088         ahc_outb(ahc, CLRSINT0, CLRSELDO|CLRSELDI|CLRSELINGO);
2089         ahc_flush_device_writes(ahc);
2090         ahc_outb(ahc, CLRINT, CLRSCSIINT);
2091         ahc_flush_device_writes(ahc);
2092 }
2093
2094 /**************************** Debugging Routines ******************************/
2095 #ifdef AHC_DEBUG
2096 uint32_t ahc_debug = AHC_DEBUG_OPTS;
2097 #endif
2098
2099 #if 0 /* unused */
2100 static void
2101 ahc_print_scb(struct scb *scb)
2102 {
2103         int i;
2104
2105         struct hardware_scb *hscb = scb->hscb;
2106
2107         printf("scb:%p control:0x%x scsiid:0x%x lun:%d cdb_len:%d\n",
2108                (void *)scb,
2109                hscb->control,
2110                hscb->scsiid,
2111                hscb->lun,
2112                hscb->cdb_len);
2113         printf("Shared Data: ");
2114         for (i = 0; i < sizeof(hscb->shared_data.cdb); i++)
2115                 printf("%#02x", hscb->shared_data.cdb[i]);
2116         printf("        dataptr:%#x datacnt:%#x sgptr:%#x tag:%#x\n",
2117                 ahc_le32toh(hscb->dataptr),
2118                 ahc_le32toh(hscb->datacnt),
2119                 ahc_le32toh(hscb->sgptr),
2120                 hscb->tag);
2121         if (scb->sg_count > 0) {
2122                 for (i = 0; i < scb->sg_count; i++) {
2123                         printf("sg[%d] - Addr 0x%x%x : Length %d\n",
2124                                i,
2125                                (ahc_le32toh(scb->sg_list[i].len) >> 24
2126                                 & SG_HIGH_ADDR_BITS),
2127                                ahc_le32toh(scb->sg_list[i].addr),
2128                                ahc_le32toh(scb->sg_list[i].len));
2129                 }
2130         }
2131 }
2132 #endif
2133
2134 /************************* Transfer Negotiation *******************************/
2135 /*
2136  * Allocate per target mode instance (ID we respond to as a target)
2137  * transfer negotiation data structures.
2138  */
2139 static struct ahc_tmode_tstate *
2140 ahc_alloc_tstate(struct ahc_softc *ahc, u_int scsi_id, char channel)
2141 {
2142         struct ahc_tmode_tstate *master_tstate;
2143         struct ahc_tmode_tstate *tstate;
2144         int i;
2145
2146         master_tstate = ahc->enabled_targets[ahc->our_id];
2147         if (channel == 'B') {
2148                 scsi_id += 8;
2149                 master_tstate = ahc->enabled_targets[ahc->our_id_b + 8];
2150         }
2151         if (ahc->enabled_targets[scsi_id] != NULL
2152          && ahc->enabled_targets[scsi_id] != master_tstate)
2153                 panic("%s: ahc_alloc_tstate - Target already allocated",
2154                       ahc_name(ahc));
2155         tstate = (struct ahc_tmode_tstate*)malloc(sizeof(*tstate),
2156                                                    M_DEVBUF, M_NOWAIT);
2157         if (tstate == NULL)
2158                 return (NULL);
2159
2160         /*
2161          * If we have allocated a master tstate, copy user settings from
2162          * the master tstate (taken from SRAM or the EEPROM) for this
2163          * channel, but reset our current and goal settings to async/narrow
2164          * until an initiator talks to us.
2165          */
2166         if (master_tstate != NULL) {
2167                 memcpy(tstate, master_tstate, sizeof(*tstate));
2168                 memset(tstate->enabled_luns, 0, sizeof(tstate->enabled_luns));
2169                 tstate->ultraenb = 0;
2170                 for (i = 0; i < AHC_NUM_TARGETS; i++) {
2171                         memset(&tstate->transinfo[i].curr, 0,
2172                               sizeof(tstate->transinfo[i].curr));
2173                         memset(&tstate->transinfo[i].goal, 0,
2174                               sizeof(tstate->transinfo[i].goal));
2175                 }
2176         } else
2177                 memset(tstate, 0, sizeof(*tstate));
2178         ahc->enabled_targets[scsi_id] = tstate;
2179         return (tstate);
2180 }
2181
2182 #ifdef AHC_TARGET_MODE
2183 /*
2184  * Free per target mode instance (ID we respond to as a target)
2185  * transfer negotiation data structures.
2186  */
2187 static void
2188 ahc_free_tstate(struct ahc_softc *ahc, u_int scsi_id, char channel, int force)
2189 {
2190         struct ahc_tmode_tstate *tstate;
2191
2192         /*
2193          * Don't clean up our "master" tstate.
2194          * It has our default user settings.
2195          */
2196         if (((channel == 'B' && scsi_id == ahc->our_id_b)
2197           || (channel == 'A' && scsi_id == ahc->our_id))
2198          && force == FALSE)
2199                 return;
2200
2201         if (channel == 'B')
2202                 scsi_id += 8;
2203         tstate = ahc->enabled_targets[scsi_id];
2204         if (tstate != NULL)
2205                 free(tstate, M_DEVBUF);
2206         ahc->enabled_targets[scsi_id] = NULL;
2207 }
2208 #endif
2209
2210 /*
2211  * Called when we have an active connection to a target on the bus,
2212  * this function finds the nearest syncrate to the input period limited
2213  * by the capabilities of the bus connectivity of and sync settings for
2214  * the target.
2215  */
2216 const struct ahc_syncrate *
2217 ahc_devlimited_syncrate(struct ahc_softc *ahc,
2218                         struct ahc_initiator_tinfo *tinfo,
2219                         u_int *period, u_int *ppr_options, role_t role)
2220 {
2221         struct  ahc_transinfo *transinfo;
2222         u_int   maxsync;
2223
2224         if ((ahc->features & AHC_ULTRA2) != 0) {
2225                 if ((ahc_inb(ahc, SBLKCTL) & ENAB40) != 0
2226                  && (ahc_inb(ahc, SSTAT2) & EXP_ACTIVE) == 0) {
2227                         maxsync = AHC_SYNCRATE_DT;
2228                 } else {
2229                         maxsync = AHC_SYNCRATE_ULTRA;
2230                         /* Can't do DT on an SE bus */
2231                         *ppr_options &= ~MSG_EXT_PPR_DT_REQ;
2232                 }
2233         } else if ((ahc->features & AHC_ULTRA) != 0) {
2234                 maxsync = AHC_SYNCRATE_ULTRA;
2235         } else {
2236                 maxsync = AHC_SYNCRATE_FAST;
2237         }
2238         /*
2239          * Never allow a value higher than our current goal
2240          * period otherwise we may allow a target initiated
2241          * negotiation to go above the limit as set by the
2242          * user.  In the case of an initiator initiated
2243          * sync negotiation, we limit based on the user
2244          * setting.  This allows the system to still accept
2245          * incoming negotiations even if target initiated
2246          * negotiation is not performed.
2247          */
2248         if (role == ROLE_TARGET)
2249                 transinfo = &tinfo->user;
2250         else
2251                 transinfo = &tinfo->goal;
2252         *ppr_options &= transinfo->ppr_options;
2253         if (transinfo->width == MSG_EXT_WDTR_BUS_8_BIT) {
2254                 maxsync = max(maxsync, (u_int)AHC_SYNCRATE_ULTRA2);
2255                 *ppr_options &= ~MSG_EXT_PPR_DT_REQ;
2256         }
2257         if (transinfo->period == 0) {
2258                 *period = 0;
2259                 *ppr_options = 0;
2260                 return (NULL);
2261         }
2262         *period = max(*period, (u_int)transinfo->period);
2263         return (ahc_find_syncrate(ahc, period, ppr_options, maxsync));
2264 }
2265
2266 /*
2267  * Look up the valid period to SCSIRATE conversion in our table.
2268  * Return the period and offset that should be sent to the target
2269  * if this was the beginning of an SDTR.
2270  */
2271 const struct ahc_syncrate *
2272 ahc_find_syncrate(struct ahc_softc *ahc, u_int *period,
2273                   u_int *ppr_options, u_int maxsync)
2274 {
2275         const struct ahc_syncrate *syncrate;
2276
2277         if ((ahc->features & AHC_DT) == 0)
2278                 *ppr_options &= ~MSG_EXT_PPR_DT_REQ;
2279
2280         /* Skip all DT only entries if DT is not available */
2281         if ((*ppr_options & MSG_EXT_PPR_DT_REQ) == 0
2282          && maxsync < AHC_SYNCRATE_ULTRA2)
2283                 maxsync = AHC_SYNCRATE_ULTRA2;
2284
2285         /* Now set the maxsync based on the card capabilities
2286          * DT is already done above */
2287         if ((ahc->features & (AHC_DT | AHC_ULTRA2)) == 0
2288             && maxsync < AHC_SYNCRATE_ULTRA)
2289                 maxsync = AHC_SYNCRATE_ULTRA;
2290         if ((ahc->features & (AHC_DT | AHC_ULTRA2 | AHC_ULTRA)) == 0
2291             && maxsync < AHC_SYNCRATE_FAST)
2292                 maxsync = AHC_SYNCRATE_FAST;
2293
2294         for (syncrate = &ahc_syncrates[maxsync];
2295              syncrate->rate != NULL;
2296              syncrate++) {
2297
2298                 /*
2299                  * The Ultra2 table doesn't go as low
2300                  * as for the Fast/Ultra cards.
2301                  */
2302                 if ((ahc->features & AHC_ULTRA2) != 0
2303                  && (syncrate->sxfr_u2 == 0))
2304                         break;
2305
2306                 if (*period <= syncrate->period) {
2307                         /*
2308                          * When responding to a target that requests
2309                          * sync, the requested rate may fall between
2310                          * two rates that we can output, but still be
2311                          * a rate that we can receive.  Because of this,
2312                          * we want to respond to the target with
2313                          * the same rate that it sent to us even
2314                          * if the period we use to send data to it
2315                          * is lower.  Only lower the response period
2316                          * if we must.
2317                          */
2318                         if (syncrate == &ahc_syncrates[maxsync])
2319                                 *period = syncrate->period;
2320
2321                         /*
2322                          * At some speeds, we only support
2323                          * ST transfers.
2324                          */
2325                         if ((syncrate->sxfr_u2 & ST_SXFR) != 0)
2326                                 *ppr_options &= ~MSG_EXT_PPR_DT_REQ;
2327                         break;
2328                 }
2329         }
2330
2331         if ((*period == 0)
2332          || (syncrate->rate == NULL)
2333          || ((ahc->features & AHC_ULTRA2) != 0
2334           && (syncrate->sxfr_u2 == 0))) {
2335                 /* Use asynchronous transfers. */
2336                 *period = 0;
2337                 syncrate = NULL;
2338                 *ppr_options &= ~MSG_EXT_PPR_DT_REQ;
2339         }
2340         return (syncrate);
2341 }
2342
2343 /*
2344  * Convert from an entry in our syncrate table to the SCSI equivalent
2345  * sync "period" factor.
2346  */
2347 u_int
2348 ahc_find_period(struct ahc_softc *ahc, u_int scsirate, u_int maxsync)
2349 {
2350         const struct ahc_syncrate *syncrate;
2351
2352         if ((ahc->features & AHC_ULTRA2) != 0)
2353                 scsirate &= SXFR_ULTRA2;
2354         else
2355                 scsirate &= SXFR;
2356
2357         /* now set maxsync based on card capabilities */
2358         if ((ahc->features & AHC_DT) == 0 && maxsync < AHC_SYNCRATE_ULTRA2)
2359                 maxsync = AHC_SYNCRATE_ULTRA2;
2360         if ((ahc->features & (AHC_DT | AHC_ULTRA2)) == 0
2361             && maxsync < AHC_SYNCRATE_ULTRA)
2362                 maxsync = AHC_SYNCRATE_ULTRA;
2363         if ((ahc->features & (AHC_DT | AHC_ULTRA2 | AHC_ULTRA)) == 0
2364             && maxsync < AHC_SYNCRATE_FAST)
2365                 maxsync = AHC_SYNCRATE_FAST;
2366
2367
2368         syncrate = &ahc_syncrates[maxsync];
2369         while (syncrate->rate != NULL) {
2370
2371                 if ((ahc->features & AHC_ULTRA2) != 0) {
2372                         if (syncrate->sxfr_u2 == 0)
2373                                 break;
2374                         else if (scsirate == (syncrate->sxfr_u2 & SXFR_ULTRA2))
2375                                 return (syncrate->period);
2376                 } else if (scsirate == (syncrate->sxfr & SXFR)) {
2377                                 return (syncrate->period);
2378                 }
2379                 syncrate++;
2380         }
2381         return (0); /* async */
2382 }
2383
2384 /*
2385  * Truncate the given synchronous offset to a value the
2386  * current adapter type and syncrate are capable of.
2387  */
2388 static void
2389 ahc_validate_offset(struct ahc_softc *ahc,
2390                     struct ahc_initiator_tinfo *tinfo,
2391                     const struct ahc_syncrate *syncrate,
2392                     u_int *offset, int wide, role_t role)
2393 {
2394         u_int maxoffset;
2395
2396         /* Limit offset to what we can do */
2397         if (syncrate == NULL) {
2398                 maxoffset = 0;
2399         } else if ((ahc->features & AHC_ULTRA2) != 0) {
2400                 maxoffset = MAX_OFFSET_ULTRA2;
2401         } else {
2402                 if (wide)
2403                         maxoffset = MAX_OFFSET_16BIT;
2404                 else
2405                         maxoffset = MAX_OFFSET_8BIT;
2406         }
2407         *offset = min(*offset, maxoffset);
2408         if (tinfo != NULL) {
2409                 if (role == ROLE_TARGET)
2410                         *offset = min(*offset, (u_int)tinfo->user.offset);
2411                 else
2412                         *offset = min(*offset, (u_int)tinfo->goal.offset);
2413         }
2414 }
2415
2416 /*
2417  * Truncate the given transfer width parameter to a value the
2418  * current adapter type is capable of.
2419  */
2420 static void
2421 ahc_validate_width(struct ahc_softc *ahc, struct ahc_initiator_tinfo *tinfo,
2422                    u_int *bus_width, role_t role)
2423 {
2424         switch (*bus_width) {
2425         default:
2426                 if (ahc->features & AHC_WIDE) {
2427                         /* Respond Wide */
2428                         *bus_width = MSG_EXT_WDTR_BUS_16_BIT;
2429                         break;
2430                 }
2431                 /* FALLTHROUGH */
2432         case MSG_EXT_WDTR_BUS_8_BIT:
2433                 *bus_width = MSG_EXT_WDTR_BUS_8_BIT;
2434                 break;
2435         }
2436         if (tinfo != NULL) {
2437                 if (role == ROLE_TARGET)
2438                         *bus_width = min((u_int)tinfo->user.width, *bus_width);
2439                 else
2440                         *bus_width = min((u_int)tinfo->goal.width, *bus_width);
2441         }
2442 }
2443
2444 /*
2445  * Update the bitmask of targets for which the controller should
2446  * negotiate with at the next convenient oportunity.  This currently
2447  * means the next time we send the initial identify messages for
2448  * a new transaction.
2449  */
2450 int
2451 ahc_update_neg_request(struct ahc_softc *ahc, struct ahc_devinfo *devinfo,
2452                        struct ahc_tmode_tstate *tstate,
2453                        struct ahc_initiator_tinfo *tinfo, ahc_neg_type neg_type)
2454 {
2455         u_int auto_negotiate_orig;
2456
2457         auto_negotiate_orig = tstate->auto_negotiate;
2458         if (neg_type == AHC_NEG_ALWAYS) {
2459                 /*
2460                  * Force our "current" settings to be
2461                  * unknown so that unless a bus reset
2462                  * occurs the need to renegotiate is
2463                  * recorded persistently.
2464                  */
2465                 if ((ahc->features & AHC_WIDE) != 0)
2466                         tinfo->curr.width = AHC_WIDTH_UNKNOWN;
2467                 tinfo->curr.period = AHC_PERIOD_UNKNOWN;
2468                 tinfo->curr.offset = AHC_OFFSET_UNKNOWN;
2469         }
2470         if (tinfo->curr.period != tinfo->goal.period
2471          || tinfo->curr.width != tinfo->goal.width
2472          || tinfo->curr.offset != tinfo->goal.offset
2473          || tinfo->curr.ppr_options != tinfo->goal.ppr_options
2474          || (neg_type == AHC_NEG_IF_NON_ASYNC
2475           && (tinfo->goal.offset != 0
2476            || tinfo->goal.width != MSG_EXT_WDTR_BUS_8_BIT
2477            || tinfo->goal.ppr_options != 0)))
2478                 tstate->auto_negotiate |= devinfo->target_mask;
2479         else
2480                 tstate->auto_negotiate &= ~devinfo->target_mask;
2481
2482         return (auto_negotiate_orig != tstate->auto_negotiate);
2483 }
2484
2485 /*
2486  * Update the user/goal/curr tables of synchronous negotiation
2487  * parameters as well as, in the case of a current or active update,
2488  * any data structures on the host controller.  In the case of an
2489  * active update, the specified target is currently talking to us on
2490  * the bus, so the transfer parameter update must take effect
2491  * immediately.
2492  */
2493 void
2494 ahc_set_syncrate(struct ahc_softc *ahc, struct ahc_devinfo *devinfo,
2495                  const struct ahc_syncrate *syncrate, u_int period,
2496                  u_int offset, u_int ppr_options, u_int type, int paused)
2497 {
2498         struct  ahc_initiator_tinfo *tinfo;
2499         struct  ahc_tmode_tstate *tstate;
2500         u_int   old_period;
2501         u_int   old_offset;
2502         u_int   old_ppr;
2503         int     active;
2504         int     update_needed;
2505
2506         active = (type & AHC_TRANS_ACTIVE) == AHC_TRANS_ACTIVE;
2507         update_needed = 0;
2508
2509         if (syncrate == NULL) {
2510                 period = 0;
2511                 offset = 0;
2512         }
2513
2514         tinfo = ahc_fetch_transinfo(ahc, devinfo->channel, devinfo->our_scsiid,
2515                                     devinfo->target, &tstate);
2516
2517         if ((type & AHC_TRANS_USER) != 0) {
2518                 tinfo->user.period = period;
2519                 tinfo->user.offset = offset;
2520                 tinfo->user.ppr_options = ppr_options;
2521         }
2522
2523         if ((type & AHC_TRANS_GOAL) != 0) {
2524                 tinfo->goal.period = period;
2525                 tinfo->goal.offset = offset;
2526                 tinfo->goal.ppr_options = ppr_options;
2527         }
2528
2529         old_period = tinfo->curr.period;
2530         old_offset = tinfo->curr.offset;
2531         old_ppr    = tinfo->curr.ppr_options;
2532
2533         if ((type & AHC_TRANS_CUR) != 0
2534          && (old_period != period
2535           || old_offset != offset
2536           || old_ppr != ppr_options)) {
2537                 u_int   scsirate;
2538
2539                 update_needed++;
2540                 scsirate = tinfo->scsirate;
2541                 if ((ahc->features & AHC_ULTRA2) != 0) {
2542
2543                         scsirate &= ~(SXFR_ULTRA2|SINGLE_EDGE|ENABLE_CRC);
2544                         if (syncrate != NULL) {
2545                                 scsirate |= syncrate->sxfr_u2;
2546                                 if ((ppr_options & MSG_EXT_PPR_DT_REQ) != 0)
2547                                         scsirate |= ENABLE_CRC;
2548                                 else
2549                                         scsirate |= SINGLE_EDGE;
2550                         }
2551                 } else {
2552
2553                         scsirate &= ~(SXFR|SOFS);
2554                         /*
2555                          * Ensure Ultra mode is set properly for
2556                          * this target.
2557                          */
2558                         tstate->ultraenb &= ~devinfo->target_mask;
2559                         if (syncrate != NULL) {
2560                                 if (syncrate->sxfr & ULTRA_SXFR) {
2561                                         tstate->ultraenb |=
2562                                                 devinfo->target_mask;
2563                                 }
2564                                 scsirate |= syncrate->sxfr & SXFR;
2565                                 scsirate |= offset & SOFS;
2566                         }
2567                         if (active) {
2568                                 u_int sxfrctl0;
2569
2570                                 sxfrctl0 = ahc_inb(ahc, SXFRCTL0);
2571                                 sxfrctl0 &= ~FAST20;
2572                                 if (tstate->ultraenb & devinfo->target_mask)
2573                                         sxfrctl0 |= FAST20;
2574                                 ahc_outb(ahc, SXFRCTL0, sxfrctl0);
2575                         }
2576                 }
2577                 if (active) {
2578                         ahc_outb(ahc, SCSIRATE, scsirate);
2579                         if ((ahc->features & AHC_ULTRA2) != 0)
2580                                 ahc_outb(ahc, SCSIOFFSET, offset);
2581                 }
2582
2583                 tinfo->scsirate = scsirate;
2584                 tinfo->curr.period = period;
2585                 tinfo->curr.offset = offset;
2586                 tinfo->curr.ppr_options = ppr_options;
2587
2588                 ahc_send_async(ahc, devinfo->channel, devinfo->target,
2589                                CAM_LUN_WILDCARD, AC_TRANSFER_NEG);
2590                 if (bootverbose) {
2591                         if (offset != 0) {
2592                                 printf("%s: target %d synchronous at %sMHz%s, "
2593                                        "offset = 0x%x\n", ahc_name(ahc),
2594                                        devinfo->target, syncrate->rate,
2595                                        (ppr_options & MSG_EXT_PPR_DT_REQ)
2596                                        ? " DT" : "", offset);
2597                         } else {
2598                                 printf("%s: target %d using "
2599                                        "asynchronous transfers\n",
2600                                        ahc_name(ahc), devinfo->target);
2601                         }
2602                 }
2603         }
2604
2605         update_needed += ahc_update_neg_request(ahc, devinfo, tstate,
2606                                                 tinfo, AHC_NEG_TO_GOAL);
2607
2608         if (update_needed)
2609                 ahc_update_pending_scbs(ahc);
2610 }
2611
2612 /*
2613  * Update the user/goal/curr tables of wide negotiation
2614  * parameters as well as, in the case of a current or active update,
2615  * any data structures on the host controller.  In the case of an
2616  * active update, the specified target is currently talking to us on
2617  * the bus, so the transfer parameter update must take effect
2618  * immediately.
2619  */
2620 void
2621 ahc_set_width(struct ahc_softc *ahc, struct ahc_devinfo *devinfo,
2622               u_int width, u_int type, int paused)
2623 {
2624         struct  ahc_initiator_tinfo *tinfo;
2625         struct  ahc_tmode_tstate *tstate;
2626         u_int   oldwidth;
2627         int     active;
2628         int     update_needed;
2629
2630         active = (type & AHC_TRANS_ACTIVE) == AHC_TRANS_ACTIVE;
2631         update_needed = 0;
2632         tinfo = ahc_fetch_transinfo(ahc, devinfo->channel, devinfo->our_scsiid,
2633                                     devinfo->target, &tstate);
2634
2635         if ((type & AHC_TRANS_USER) != 0)
2636                 tinfo->user.width = width;
2637
2638         if ((type & AHC_TRANS_GOAL) != 0)
2639                 tinfo->goal.width = width;
2640
2641         oldwidth = tinfo->curr.width;
2642         if ((type & AHC_TRANS_CUR) != 0 && oldwidth != width) {
2643                 u_int   scsirate;
2644
2645                 update_needed++;
2646                 scsirate =  tinfo->scsirate;
2647                 scsirate &= ~WIDEXFER;
2648                 if (width == MSG_EXT_WDTR_BUS_16_BIT)
2649                         scsirate |= WIDEXFER;
2650
2651                 tinfo->scsirate = scsirate;
2652
2653                 if (active)
2654                         ahc_outb(ahc, SCSIRATE, scsirate);
2655
2656                 tinfo->curr.width = width;
2657
2658                 ahc_send_async(ahc, devinfo->channel, devinfo->target,
2659                                CAM_LUN_WILDCARD, AC_TRANSFER_NEG);
2660                 if (bootverbose) {
2661                         printf("%s: target %d using %dbit transfers\n",
2662                                ahc_name(ahc), devinfo->target,
2663                                8 * (0x01 << width));
2664                 }
2665         }
2666
2667         update_needed += ahc_update_neg_request(ahc, devinfo, tstate,
2668                                                 tinfo, AHC_NEG_TO_GOAL);
2669         if (update_needed)
2670                 ahc_update_pending_scbs(ahc);
2671 }
2672
2673 /*
2674  * Update the current state of tagged queuing for a given target.
2675  */
2676 static void
2677 ahc_set_tags(struct ahc_softc *ahc, struct scsi_cmnd *cmd,
2678              struct ahc_devinfo *devinfo, ahc_queue_alg alg)
2679 {
2680         struct scsi_device *sdev = cmd->device;
2681
2682         ahc_platform_set_tags(ahc, sdev, devinfo, alg);
2683         ahc_send_async(ahc, devinfo->channel, devinfo->target,
2684                        devinfo->lun, AC_TRANSFER_NEG);
2685 }
2686
2687 /*
2688  * When the transfer settings for a connection change, update any
2689  * in-transit SCBs to contain the new data so the hardware will
2690  * be set correctly during future (re)selections.
2691  */
2692 static void
2693 ahc_update_pending_scbs(struct ahc_softc *ahc)
2694 {
2695         struct  scb *pending_scb;
2696         int     pending_scb_count;
2697         int     i;
2698         int     paused;
2699         u_int   saved_scbptr;
2700
2701         /*
2702          * Traverse the pending SCB list and ensure that all of the
2703          * SCBs there have the proper settings.
2704          */
2705         pending_scb_count = 0;
2706         LIST_FOREACH(pending_scb, &ahc->pending_scbs, pending_links) {
2707                 struct ahc_devinfo devinfo;
2708                 struct hardware_scb *pending_hscb;
2709                 struct ahc_initiator_tinfo *tinfo;
2710                 struct ahc_tmode_tstate *tstate;
2711
2712                 ahc_scb_devinfo(ahc, &devinfo, pending_scb);
2713                 tinfo = ahc_fetch_transinfo(ahc, devinfo.channel,
2714                                             devinfo.our_scsiid,
2715                                             devinfo.target, &tstate);
2716                 pending_hscb = pending_scb->hscb;
2717                 pending_hscb->control &= ~ULTRAENB;
2718                 if ((tstate->ultraenb & devinfo.target_mask) != 0)
2719                         pending_hscb->control |= ULTRAENB;
2720                 pending_hscb->scsirate = tinfo->scsirate;
2721                 pending_hscb->scsioffset = tinfo->curr.offset;
2722                 if ((tstate->auto_negotiate & devinfo.target_mask) == 0
2723                  && (pending_scb->flags & SCB_AUTO_NEGOTIATE) != 0) {
2724                         pending_scb->flags &= ~SCB_AUTO_NEGOTIATE;
2725                         pending_hscb->control &= ~MK_MESSAGE;
2726                 }
2727                 ahc_sync_scb(ahc, pending_scb,
2728                              BUS_DMASYNC_PREREAD|BUS_DMASYNC_PREWRITE);
2729                 pending_scb_count++;
2730         }
2731
2732         if (pending_scb_count == 0)
2733                 return;
2734
2735         if (ahc_is_paused(ahc)) {
2736                 paused = 1;
2737         } else {
2738                 paused = 0;
2739                 ahc_pause(ahc);
2740         }
2741
2742         saved_scbptr = ahc_inb(ahc, SCBPTR);
2743         /* Ensure that the hscbs down on the card match the new information */
2744         for (i = 0; i < ahc->scb_data->maxhscbs; i++) {
2745                 struct  hardware_scb *pending_hscb;
2746                 u_int   control;
2747                 u_int   scb_tag;
2748
2749                 ahc_outb(ahc, SCBPTR, i);
2750                 scb_tag = ahc_inb(ahc, SCB_TAG);
2751                 pending_scb = ahc_lookup_scb(ahc, scb_tag);
2752                 if (pending_scb == NULL)
2753                         continue;
2754
2755                 pending_hscb = pending_scb->hscb;
2756                 control = ahc_inb(ahc, SCB_CONTROL);
2757                 control &= ~(ULTRAENB|MK_MESSAGE);
2758                 control |= pending_hscb->control & (ULTRAENB|MK_MESSAGE);
2759                 ahc_outb(ahc, SCB_CONTROL, control);
2760                 ahc_outb(ahc, SCB_SCSIRATE, pending_hscb->scsirate);
2761                 ahc_outb(ahc, SCB_SCSIOFFSET, pending_hscb->scsioffset);
2762         }
2763         ahc_outb(ahc, SCBPTR, saved_scbptr);
2764
2765         if (paused == 0)
2766                 ahc_unpause(ahc);
2767 }
2768
2769 /**************************** Pathing Information *****************************/
2770 static void
2771 ahc_fetch_devinfo(struct ahc_softc *ahc, struct ahc_devinfo *devinfo)
2772 {
2773         u_int   saved_scsiid;
2774         role_t  role;
2775         int     our_id;
2776
2777         if (ahc_inb(ahc, SSTAT0) & TARGET)
2778                 role = ROLE_TARGET;
2779         else
2780                 role = ROLE_INITIATOR;
2781
2782         if (role == ROLE_TARGET
2783          && (ahc->features & AHC_MULTI_TID) != 0
2784          && (ahc_inb(ahc, SEQ_FLAGS)
2785            & (CMDPHASE_PENDING|TARG_CMD_PENDING|NO_DISCONNECT)) != 0) {
2786                 /* We were selected, so pull our id from TARGIDIN */
2787                 our_id = ahc_inb(ahc, TARGIDIN) & OID;
2788         } else if ((ahc->features & AHC_ULTRA2) != 0)
2789                 our_id = ahc_inb(ahc, SCSIID_ULTRA2) & OID;
2790         else
2791                 our_id = ahc_inb(ahc, SCSIID) & OID;
2792
2793         saved_scsiid = ahc_inb(ahc, SAVED_SCSIID);
2794         ahc_compile_devinfo(devinfo,
2795                             our_id,
2796                             SCSIID_TARGET(ahc, saved_scsiid),
2797                             ahc_inb(ahc, SAVED_LUN),
2798                             SCSIID_CHANNEL(ahc, saved_scsiid),
2799                             role);
2800 }
2801
2802 static const struct ahc_phase_table_entry*
2803 ahc_lookup_phase_entry(int phase)
2804 {
2805         const struct ahc_phase_table_entry *entry;
2806         const struct ahc_phase_table_entry *last_entry;
2807
2808         /*
2809          * num_phases doesn't include the default entry which
2810          * will be returned if the phase doesn't match.
2811          */
2812         last_entry = &ahc_phase_table[num_phases];
2813         for (entry = ahc_phase_table; entry < last_entry; entry++) {
2814                 if (phase == entry->phase)
2815                         break;
2816         }
2817         return (entry);
2818 }
2819
2820 void
2821 ahc_compile_devinfo(struct ahc_devinfo *devinfo, u_int our_id, u_int target,
2822                     u_int lun, char channel, role_t role)
2823 {
2824         devinfo->our_scsiid = our_id;
2825         devinfo->target = target;
2826         devinfo->lun = lun;
2827         devinfo->target_offset = target;
2828         devinfo->channel = channel;
2829         devinfo->role = role;
2830         if (channel == 'B')
2831                 devinfo->target_offset += 8;
2832         devinfo->target_mask = (0x01 << devinfo->target_offset);
2833 }
2834
2835 void
2836 ahc_print_devinfo(struct ahc_softc *ahc, struct ahc_devinfo *devinfo)
2837 {
2838         printf("%s:%c:%d:%d: ", ahc_name(ahc), devinfo->channel,
2839                devinfo->target, devinfo->lun);
2840 }
2841
2842 static void
2843 ahc_scb_devinfo(struct ahc_softc *ahc, struct ahc_devinfo *devinfo,
2844                 struct scb *scb)
2845 {
2846         role_t  role;
2847         int     our_id;
2848
2849         our_id = SCSIID_OUR_ID(scb->hscb->scsiid);
2850         role = ROLE_INITIATOR;
2851         if ((scb->flags & SCB_TARGET_SCB) != 0)
2852                 role = ROLE_TARGET;
2853         ahc_compile_devinfo(devinfo, our_id, SCB_GET_TARGET(ahc, scb),
2854                             SCB_GET_LUN(scb), SCB_GET_CHANNEL(ahc, scb), role);
2855 }
2856
2857
2858 /************************ Message Phase Processing ****************************/
2859 static void
2860 ahc_assert_atn(struct ahc_softc *ahc)
2861 {
2862         u_int scsisigo;
2863
2864         scsisigo = ATNO;
2865         if ((ahc->features & AHC_DT) == 0)
2866                 scsisigo |= ahc_inb(ahc, SCSISIGI);
2867         ahc_outb(ahc, SCSISIGO, scsisigo);
2868 }
2869
2870 /*
2871  * When an initiator transaction with the MK_MESSAGE flag either reconnects
2872  * or enters the initial message out phase, we are interrupted.  Fill our
2873  * outgoing message buffer with the appropriate message and beging handing
2874  * the message phase(s) manually.
2875  */
2876 static void
2877 ahc_setup_initiator_msgout(struct ahc_softc *ahc, struct ahc_devinfo *devinfo,
2878                            struct scb *scb)
2879 {
2880         /*
2881          * To facilitate adding multiple messages together,
2882          * each routine should increment the index and len
2883          * variables instead of setting them explicitly.
2884          */
2885         ahc->msgout_index = 0;
2886         ahc->msgout_len = 0;
2887
2888         if ((scb->flags & SCB_DEVICE_RESET) == 0
2889          && ahc_inb(ahc, MSG_OUT) == MSG_IDENTIFYFLAG) {
2890                 u_int identify_msg;
2891
2892                 identify_msg = MSG_IDENTIFYFLAG | SCB_GET_LUN(scb);
2893                 if ((scb->hscb->control & DISCENB) != 0)
2894                         identify_msg |= MSG_IDENTIFY_DISCFLAG;
2895                 ahc->msgout_buf[ahc->msgout_index++] = identify_msg;
2896                 ahc->msgout_len++;
2897
2898                 if ((scb->hscb->control & TAG_ENB) != 0) {
2899                         ahc->msgout_buf[ahc->msgout_index++] =
2900                             scb->hscb->control & (TAG_ENB|SCB_TAG_TYPE);
2901                         ahc->msgout_buf[ahc->msgout_index++] = scb->hscb->tag;
2902                         ahc->msgout_len += 2;
2903                 }
2904         }
2905
2906         if (scb->flags & SCB_DEVICE_RESET) {
2907                 ahc->msgout_buf[ahc->msgout_index++] = MSG_BUS_DEV_RESET;
2908                 ahc->msgout_len++;
2909                 ahc_print_path(ahc, scb);
2910                 printf("Bus Device Reset Message Sent\n");
2911                 /*
2912                  * Clear our selection hardware in advance of
2913                  * the busfree.  We may have an entry in the waiting
2914                  * Q for this target, and we don't want to go about
2915                  * selecting while we handle the busfree and blow it
2916                  * away.
2917                  */
2918                 ahc_outb(ahc, SCSISEQ, (ahc_inb(ahc, SCSISEQ) & ~ENSELO));
2919         } else if ((scb->flags & SCB_ABORT) != 0) {
2920                 if ((scb->hscb->control & TAG_ENB) != 0)
2921                         ahc->msgout_buf[ahc->msgout_index++] = MSG_ABORT_TAG;
2922                 else
2923                         ahc->msgout_buf[ahc->msgout_index++] = MSG_ABORT;
2924                 ahc->msgout_len++;
2925                 ahc_print_path(ahc, scb);
2926                 printf("Abort%s Message Sent\n",
2927                        (scb->hscb->control & TAG_ENB) != 0 ? " Tag" : "");
2928                 /*
2929                  * Clear our selection hardware in advance of
2930                  * the busfree.  We may have an entry in the waiting
2931                  * Q for this target, and we don't want to go about
2932                  * selecting while we handle the busfree and blow it
2933                  * away.
2934                  */
2935                 ahc_outb(ahc, SCSISEQ, (ahc_inb(ahc, SCSISEQ) & ~ENSELO));
2936         } else if ((scb->flags & (SCB_AUTO_NEGOTIATE|SCB_NEGOTIATE)) != 0) {
2937                 ahc_build_transfer_msg(ahc, devinfo);
2938         } else {
2939                 printf("ahc_intr: AWAITING_MSG for an SCB that "
2940                        "does not have a waiting message\n");
2941                 printf("SCSIID = %x, target_mask = %x\n", scb->hscb->scsiid,
2942                        devinfo->target_mask);
2943                 panic("SCB = %d, SCB Control = %x, MSG_OUT = %x "
2944                       "SCB flags = %x", scb->hscb->tag, scb->hscb->control,
2945                       ahc_inb(ahc, MSG_OUT), scb->flags);
2946         }
2947
2948         /*
2949          * Clear the MK_MESSAGE flag from the SCB so we aren't
2950          * asked to send this message again.
2951          */
2952         ahc_outb(ahc, SCB_CONTROL, ahc_inb(ahc, SCB_CONTROL) & ~MK_MESSAGE);
2953         scb->hscb->control &= ~MK_MESSAGE;
2954         ahc->msgout_index = 0;
2955         ahc->msg_type = MSG_TYPE_INITIATOR_MSGOUT;
2956 }
2957
2958 /*
2959  * Build an appropriate transfer negotiation message for the
2960  * currently active target.
2961  */
2962 static void
2963 ahc_build_transfer_msg(struct ahc_softc *ahc, struct ahc_devinfo *devinfo)
2964 {
2965         /*
2966          * We need to initiate transfer negotiations.
2967          * If our current and goal settings are identical,
2968          * we want to renegotiate due to a check condition.
2969          */
2970         struct  ahc_initiator_tinfo *tinfo;
2971         struct  ahc_tmode_tstate *tstate;
2972         const struct ahc_syncrate *rate;
2973         int     dowide;
2974         int     dosync;
2975         int     doppr;
2976         u_int   period;
2977         u_int   ppr_options;
2978         u_int   offset;
2979
2980         tinfo = ahc_fetch_transinfo(ahc, devinfo->channel, devinfo->our_scsiid,
2981                                     devinfo->target, &tstate);
2982         /*
2983          * Filter our period based on the current connection.
2984          * If we can't perform DT transfers on this segment (not in LVD
2985          * mode for instance), then our decision to issue a PPR message
2986          * may change.
2987          */
2988         period = tinfo->goal.period;
2989         offset = tinfo->goal.offset;
2990         ppr_options = tinfo->goal.ppr_options;
2991         /* Target initiated PPR is not allowed in the SCSI spec */
2992         if (devinfo->role == ROLE_TARGET)
2993                 ppr_options = 0;
2994         rate = ahc_devlimited_syncrate(ahc, tinfo, &period,
2995                                        &ppr_options, devinfo->role);
2996         dowide = tinfo->curr.width != tinfo->goal.width;
2997         dosync = tinfo->curr.offset != offset || tinfo->curr.period != period;
2998         /*
2999          * Only use PPR if we have options that need it, even if the device
3000          * claims to support it.  There might be an expander in the way
3001          * that doesn't.
3002          */
3003         doppr = ppr_options != 0;
3004
3005         if (!dowide && !dosync && !doppr) {
3006                 dowide = tinfo->goal.width != MSG_EXT_WDTR_BUS_8_BIT;
3007                 dosync = tinfo->goal.offset != 0;
3008         }
3009
3010         if (!dowide && !dosync && !doppr) {
3011                 /*
3012                  * Force async with a WDTR message if we have a wide bus,
3013                  * or just issue an SDTR with a 0 offset.
3014                  */
3015                 if ((ahc->features & AHC_WIDE) != 0)
3016                         dowide = 1;
3017                 else
3018                         dosync = 1;
3019
3020                 if (bootverbose) {
3021                         ahc_print_devinfo(ahc, devinfo);
3022                         printf("Ensuring async\n");
3023                 }
3024         }
3025
3026         /* Target initiated PPR is not allowed in the SCSI spec */
3027         if (devinfo->role == ROLE_TARGET)
3028                 doppr = 0;
3029
3030         /*
3031          * Both the PPR message and SDTR message require the
3032          * goal syncrate to be limited to what the target device
3033          * is capable of handling (based on whether an LVD->SE
3034          * expander is on the bus), so combine these two cases.
3035          * Regardless, guarantee that if we are using WDTR and SDTR
3036          * messages that WDTR comes first.
3037          */
3038         if (doppr || (dosync && !dowide)) {
3039
3040                 offset = tinfo->goal.offset;
3041                 ahc_validate_offset(ahc, tinfo, rate, &offset,
3042                                     doppr ? tinfo->goal.width
3043                                           : tinfo->curr.width,
3044                                     devinfo->role);
3045                 if (doppr) {
3046                         ahc_construct_ppr(ahc, devinfo, period, offset,
3047                                           tinfo->goal.width, ppr_options);
3048                 } else {
3049                         ahc_construct_sdtr(ahc, devinfo, period, offset);
3050                 }
3051         } else {
3052                 ahc_construct_wdtr(ahc, devinfo, tinfo->goal.width);
3053         }
3054 }
3055
3056 /*
3057  * Build a synchronous negotiation message in our message
3058  * buffer based on the input parameters.
3059  */
3060 static void
3061 ahc_construct_sdtr(struct ahc_softc *ahc, struct ahc_devinfo *devinfo,
3062                    u_int period, u_int offset)
3063 {
3064         if (offset == 0)
3065                 period = AHC_ASYNC_XFER_PERIOD;
3066         ahc->msgout_index += spi_populate_sync_msg(
3067                         ahc->msgout_buf + ahc->msgout_index, period, offset);
3068         ahc->msgout_len += 5;
3069         if (bootverbose) {
3070                 printf("(%s:%c:%d:%d): Sending SDTR period %x, offset %x\n",
3071                        ahc_name(ahc), devinfo->channel, devinfo->target,
3072                        devinfo->lun, period, offset);
3073         }
3074 }
3075
3076 /*
3077  * Build a wide negotiation message in our message
3078  * buffer based on the input parameters.
3079  */
3080 static void
3081 ahc_construct_wdtr(struct ahc_softc *ahc, struct ahc_devinfo *devinfo,
3082                    u_int bus_width)
3083 {
3084         ahc->msgout_index += spi_populate_width_msg(
3085                         ahc->msgout_buf + ahc->msgout_index, bus_width);
3086         ahc->msgout_len += 4;
3087         if (bootverbose) {
3088                 printf("(%s:%c:%d:%d): Sending WDTR %x\n",
3089                        ahc_name(ahc), devinfo->channel, devinfo->target,
3090                        devinfo->lun, bus_width);
3091         }
3092 }
3093
3094 /*
3095  * Build a parallel protocol request message in our message
3096  * buffer based on the input parameters.
3097  */
3098 static void
3099 ahc_construct_ppr(struct ahc_softc *ahc, struct ahc_devinfo *devinfo,
3100                   u_int period, u_int offset, u_int bus_width,
3101                   u_int ppr_options)
3102 {
3103         if (offset == 0)
3104                 period = AHC_ASYNC_XFER_PERIOD;
3105         ahc->msgout_index += spi_populate_ppr_msg(
3106                         ahc->msgout_buf + ahc->msgout_index, period, offset,
3107                         bus_width, ppr_options);
3108         ahc->msgout_len += 8;
3109         if (bootverbose) {
3110                 printf("(%s:%c:%d:%d): Sending PPR bus_width %x, period %x, "
3111                        "offset %x, ppr_options %x\n", ahc_name(ahc),
3112                        devinfo->channel, devinfo->target, devinfo->lun,
3113                        bus_width, period, offset, ppr_options);
3114         }
3115 }
3116
3117 /*
3118  * Clear any active message state.
3119  */
3120 static void
3121 ahc_clear_msg_state(struct ahc_softc *ahc)
3122 {
3123         ahc->msgout_len = 0;
3124         ahc->msgin_index = 0;
3125         ahc->msg_type = MSG_TYPE_NONE;
3126         if ((ahc_inb(ahc, SCSISIGI) & ATNI) != 0) {
3127                 /*
3128                  * The target didn't care to respond to our
3129                  * message request, so clear ATN.
3130                  */
3131                 ahc_outb(ahc, CLRSINT1, CLRATNO);
3132         }
3133         ahc_outb(ahc, MSG_OUT, MSG_NOOP);
3134         ahc_outb(ahc, SEQ_FLAGS2,
3135                  ahc_inb(ahc, SEQ_FLAGS2) & ~TARGET_MSG_PENDING);
3136 }
3137
3138 static void
3139 ahc_handle_proto_violation(struct ahc_softc *ahc)
3140 {
3141         struct  ahc_devinfo devinfo;
3142         struct  scb *scb;
3143         u_int   scbid;
3144         u_int   seq_flags;
3145         u_int   curphase;
3146         u_int   lastphase;
3147         int     found;
3148
3149         ahc_fetch_devinfo(ahc, &devinfo);
3150         scbid = ahc_inb(ahc, SCB_TAG);
3151         scb = ahc_lookup_scb(ahc, scbid);
3152         seq_flags = ahc_inb(ahc, SEQ_FLAGS);
3153         curphase = ahc_inb(ahc, SCSISIGI) & PHASE_MASK;
3154         lastphase = ahc_inb(ahc, LASTPHASE);
3155         if ((seq_flags & NOT_IDENTIFIED) != 0) {
3156
3157                 /*
3158                  * The reconnecting target either did not send an
3159                  * identify message, or did, but we didn't find an SCB
3160                  * to match.
3161                  */
3162                 ahc_print_devinfo(ahc, &devinfo);
3163                 printf("Target did not send an IDENTIFY message. "
3164                        "LASTPHASE = 0x%x.\n", lastphase);
3165                 scb = NULL;
3166         } else if (scb == NULL) {
3167                 /*
3168                  * We don't seem to have an SCB active for this
3169                  * transaction.  Print an error and reset the bus.
3170                  */
3171                 ahc_print_devinfo(ahc, &devinfo);
3172                 printf("No SCB found during protocol violation\n");
3173                 goto proto_violation_reset;
3174         } else {
3175                 ahc_set_transaction_status(scb, CAM_SEQUENCE_FAIL);
3176                 if ((seq_flags & NO_CDB_SENT) != 0) {
3177                         ahc_print_path(ahc, scb);
3178                         printf("No or incomplete CDB sent to device.\n");
3179                 } else if ((ahc_inb(ahc, SCB_CONTROL) & STATUS_RCVD) == 0) {
3180                         /*
3181                          * The target never bothered to provide status to
3182                          * us prior to completing the command.  Since we don't
3183                          * know the disposition of this command, we must attempt
3184                          * to abort it.  Assert ATN and prepare to send an abort
3185                          * message.
3186                          */
3187                         ahc_print_path(ahc, scb);
3188                         printf("Completed command without status.\n");
3189                 } else {
3190                         ahc_print_path(ahc, scb);
3191                         printf("Unknown protocol violation.\n");
3192                         ahc_dump_card_state(ahc);
3193                 }
3194         }
3195         if ((lastphase & ~P_DATAIN_DT) == 0
3196          || lastphase == P_COMMAND) {
3197 proto_violation_reset:
3198                 /*
3199                  * Target either went directly to data/command
3200                  * phase or didn't respond to our ATN.
3201                  * The only safe thing to do is to blow
3202                  * it away with a bus reset.
3203                  */
3204                 found = ahc_reset_channel(ahc, 'A', TRUE);
3205                 printf("%s: Issued Channel %c Bus Reset. "
3206                        "%d SCBs aborted\n", ahc_name(ahc), 'A', found);
3207         } else {
3208                 /*
3209                  * Leave the selection hardware off in case
3210                  * this abort attempt will affect yet to
3211                  * be sent commands.
3212                  */
3213                 ahc_outb(ahc, SCSISEQ,
3214                          ahc_inb(ahc, SCSISEQ) & ~ENSELO);
3215                 ahc_assert_atn(ahc);
3216                 ahc_outb(ahc, MSG_OUT, HOST_MSG);
3217                 if (scb == NULL) {
3218                         ahc_print_devinfo(ahc, &devinfo);
3219                         ahc->msgout_buf[0] = MSG_ABORT_TASK;
3220                         ahc->msgout_len = 1;
3221                         ahc->msgout_index = 0;
3222                         ahc->msg_type = MSG_TYPE_INITIATOR_MSGOUT;
3223                 } else {
3224                         ahc_print_path(ahc, scb);
3225                         scb->flags |= SCB_ABORT;
3226                 }
3227                 printf("Protocol violation %s.  Attempting to abort.\n",
3228                        ahc_lookup_phase_entry(curphase)->phasemsg);
3229         }
3230 }
3231
3232 /*
3233  * Manual message loop handler.
3234  */
3235 static void
3236 ahc_handle_message_phase(struct ahc_softc *ahc)
3237 {
3238         struct  ahc_devinfo devinfo;
3239         u_int   bus_phase;
3240         int     end_session;
3241
3242         ahc_fetch_devinfo(ahc, &devinfo);
3243         end_session = FALSE;
3244         bus_phase = ahc_inb(ahc, SCSISIGI) & PHASE_MASK;
3245
3246 reswitch:
3247         switch (ahc->msg_type) {
3248         case MSG_TYPE_INITIATOR_MSGOUT:
3249         {
3250                 int lastbyte;
3251                 int phasemis;
3252                 int msgdone;
3253
3254                 if (ahc->msgout_len == 0)
3255                         panic("HOST_MSG_LOOP interrupt with no active message");
3256
3257 #ifdef AHC_DEBUG
3258                 if ((ahc_debug & AHC_SHOW_MESSAGES) != 0) {
3259                         ahc_print_devinfo(ahc, &devinfo);
3260                         printf("INITIATOR_MSG_OUT");
3261                 }
3262 #endif
3263                 phasemis = bus_phase != P_MESGOUT;
3264                 if (phasemis) {
3265 #ifdef AHC_DEBUG
3266                         if ((ahc_debug & AHC_SHOW_MESSAGES) != 0) {
3267                                 printf(" PHASEMIS %s\n",
3268                                        ahc_lookup_phase_entry(bus_phase)
3269                                                              ->phasemsg);
3270                         }
3271 #endif
3272                         if (bus_phase == P_MESGIN) {
3273                                 /*
3274                                  * Change gears and see if
3275                                  * this messages is of interest to
3276                                  * us or should be passed back to
3277                                  * the sequencer.
3278                                  */
3279                                 ahc_outb(ahc, CLRSINT1, CLRATNO);
3280                                 ahc->send_msg_perror = FALSE;
3281                                 ahc->msg_type = MSG_TYPE_INITIATOR_MSGIN;
3282                                 ahc->msgin_index = 0;
3283                                 goto reswitch;
3284                         }
3285                         end_session = TRUE;
3286                         break;
3287                 }
3288
3289                 if (ahc->send_msg_perror) {
3290                         ahc_outb(ahc, CLRSINT1, CLRATNO);
3291                         ahc_outb(ahc, CLRSINT1, CLRREQINIT);
3292 #ifdef AHC_DEBUG
3293                         if ((ahc_debug & AHC_SHOW_MESSAGES) != 0)
3294                                 printf(" byte 0x%x\n", ahc->send_msg_perror);
3295 #endif
3296                         ahc_outb(ahc, SCSIDATL, MSG_PARITY_ERROR);
3297                         break;
3298                 }
3299
3300                 msgdone = ahc->msgout_index == ahc->msgout_len;
3301                 if (msgdone) {
3302                         /*
3303                          * The target has requested a retry.
3304                          * Re-assert ATN, reset our message index to
3305                          * 0, and try again.
3306                          */
3307                         ahc->msgout_index = 0;
3308                         ahc_assert_atn(ahc);
3309                 }
3310
3311                 lastbyte = ahc->msgout_index == (ahc->msgout_len - 1);
3312                 if (lastbyte) {
3313                         /* Last byte is signified by dropping ATN */
3314                         ahc_outb(ahc, CLRSINT1, CLRATNO);
3315                 }
3316
3317                 /*
3318                  * Clear our interrupt status and present
3319                  * the next byte on the bus.
3320                  */
3321                 ahc_outb(ahc, CLRSINT1, CLRREQINIT);
3322 #ifdef AHC_DEBUG
3323                 if ((ahc_debug & AHC_SHOW_MESSAGES) != 0)
3324                         printf(" byte 0x%x\n",
3325                                ahc->msgout_buf[ahc->msgout_index]);
3326 #endif
3327                 ahc_outb(ahc, SCSIDATL, ahc->msgout_buf[ahc->msgout_index++]);
3328                 break;
3329         }
3330         case MSG_TYPE_INITIATOR_MSGIN:
3331         {
3332                 int phasemis;
3333                 int message_done;
3334
3335 #ifdef AHC_DEBUG
3336                 if ((ahc_debug & AHC_SHOW_MESSAGES) != 0) {
3337                         ahc_print_devinfo(ahc, &devinfo);
3338                         printf("INITIATOR_MSG_IN");
3339                 }
3340 #endif
3341                 phasemis = bus_phase != P_MESGIN;
3342                 if (phasemis) {
3343 #ifdef AHC_DEBUG
3344                         if ((ahc_debug & AHC_SHOW_MESSAGES) != 0) {
3345                                 printf(" PHASEMIS %s\n",
3346                                        ahc_lookup_phase_entry(bus_phase)
3347                                                              ->phasemsg);
3348                         }
3349 #endif
3350                         ahc->msgin_index = 0;
3351                         if (bus_phase == P_MESGOUT
3352                          && (ahc->send_msg_perror == TRUE
3353                           || (ahc->msgout_len != 0
3354                            && ahc->msgout_index == 0))) {
3355                                 ahc->msg_type = MSG_TYPE_INITIATOR_MSGOUT;
3356                                 goto reswitch;
3357                         }
3358                         end_session = TRUE;
3359                         break;
3360                 }
3361
3362                 /* Pull the byte in without acking it */
3363                 ahc->msgin_buf[ahc->msgin_index] = ahc_inb(ahc, SCSIBUSL);
3364 #ifdef AHC_DEBUG
3365                 if ((ahc_debug & AHC_SHOW_MESSAGES) != 0)
3366                         printf(" byte 0x%x\n",
3367                                ahc->msgin_buf[ahc->msgin_index]);
3368 #endif
3369
3370                 message_done = ahc_parse_msg(ahc, &devinfo);
3371
3372                 if (message_done) {
3373                         /*
3374                          * Clear our incoming message buffer in case there
3375                          * is another message following this one.
3376                          */
3377                         ahc->msgin_index = 0;
3378
3379                         /*
3380                          * If this message illicited a response,
3381                          * assert ATN so the target takes us to the
3382                          * message out phase.
3383                          */
3384                         if (ahc->msgout_len != 0) {
3385 #ifdef AHC_DEBUG
3386                                 if ((ahc_debug & AHC_SHOW_MESSAGES) != 0) {
3387                                         ahc_print_devinfo(ahc, &devinfo);
3388                                         printf("Asserting ATN for response\n");
3389                                 }
3390 #endif
3391                                 ahc_assert_atn(ahc);
3392                         }
3393                 } else
3394                         ahc->msgin_index++;
3395
3396                 if (message_done == MSGLOOP_TERMINATED) {
3397                         end_session = TRUE;
3398                 } else {
3399                         /* Ack the byte */
3400                         ahc_outb(ahc, CLRSINT1, CLRREQINIT);
3401                         ahc_inb(ahc, SCSIDATL);
3402                 }
3403                 break;
3404         }
3405         case MSG_TYPE_TARGET_MSGIN:
3406         {
3407                 int msgdone;
3408                 int msgout_request;
3409
3410                 if (ahc->msgout_len == 0)
3411                         panic("Target MSGIN with no active message");
3412
3413                 /*
3414                  * If we interrupted a mesgout session, the initiator
3415                  * will not know this until our first REQ.  So, we
3416                  * only honor mesgout requests after we've sent our
3417                  * first byte.
3418                  */
3419                 if ((ahc_inb(ahc, SCSISIGI) & ATNI) != 0
3420                  && ahc->msgout_index > 0)
3421                         msgout_request = TRUE;
3422                 else
3423                         msgout_request = FALSE;
3424
3425                 if (msgout_request) {
3426
3427                         /*
3428                          * Change gears and see if
3429                          * this messages is of interest to
3430                          * us or should be passed back to
3431                          * the sequencer.
3432                          */
3433                         ahc->msg_type = MSG_TYPE_TARGET_MSGOUT;
3434                         ahc_outb(ahc, SCSISIGO, P_MESGOUT | BSYO);
3435                         ahc->msgin_index = 0;
3436                         /* Dummy read to REQ for first byte */
3437                         ahc_inb(ahc, SCSIDATL);
3438                         ahc_outb(ahc, SXFRCTL0,
3439                                  ahc_inb(ahc, SXFRCTL0) | SPIOEN);
3440                         break;
3441                 }
3442
3443                 msgdone = ahc->msgout_index == ahc->msgout_len;
3444                 if (msgdone) {
3445                         ahc_outb(ahc, SXFRCTL0,
3446                                  ahc_inb(ahc, SXFRCTL0) & ~SPIOEN);
3447                         end_session = TRUE;
3448                         break;
3449                 }
3450
3451                 /*
3452                  * Present the next byte on the bus.
3453                  */
3454                 ahc_outb(ahc, SXFRCTL0, ahc_inb(ahc, SXFRCTL0) | SPIOEN);
3455                 ahc_outb(ahc, SCSIDATL, ahc->msgout_buf[ahc->msgout_index++]);
3456                 break;
3457         }
3458         case MSG_TYPE_TARGET_MSGOUT:
3459         {
3460                 int lastbyte;
3461                 int msgdone;
3462
3463                 /*
3464                  * The initiator signals that this is
3465                  * the last byte by dropping ATN.
3466                  */
3467                 lastbyte = (ahc_inb(ahc, SCSISIGI) & ATNI) == 0;
3468
3469                 /*
3470                  * Read the latched byte, but turn off SPIOEN first
3471                  * so that we don't inadvertently cause a REQ for the
3472                  * next byte.
3473                  */
3474                 ahc_outb(ahc, SXFRCTL0, ahc_inb(ahc, SXFRCTL0) & ~SPIOEN);
3475                 ahc->msgin_buf[ahc->msgin_index] = ahc_inb(ahc, SCSIDATL);
3476                 msgdone = ahc_parse_msg(ahc, &devinfo);
3477                 if (msgdone == MSGLOOP_TERMINATED) {
3478                         /*
3479                          * The message is *really* done in that it caused
3480                          * us to go to bus free.  The sequencer has already
3481                          * been reset at this point, so pull the ejection
3482                          * handle.
3483                          */
3484                         return;
3485                 }
3486
3487                 ahc->msgin_index++;
3488
3489                 /*
3490                  * XXX Read spec about initiator dropping ATN too soon
3491                  *     and use msgdone to detect it.
3492                  */
3493                 if (msgdone == MSGLOOP_MSGCOMPLETE) {
3494                         ahc->msgin_index = 0;
3495
3496                         /*
3497                          * If this message illicited a response, transition
3498                          * to the Message in phase and send it.
3499                          */
3500                         if (ahc->msgout_len != 0) {
3501                                 ahc_outb(ahc, SCSISIGO, P_MESGIN | BSYO);
3502                                 ahc_outb(ahc, SXFRCTL0,
3503                                          ahc_inb(ahc, SXFRCTL0) | SPIOEN);
3504                                 ahc->msg_type = MSG_TYPE_TARGET_MSGIN;
3505                                 ahc->msgin_index = 0;
3506                                 break;
3507                         }
3508                 }
3509
3510                 if (lastbyte)
3511                         end_session = TRUE;
3512                 else {
3513                         /* Ask for the next byte. */
3514                         ahc_outb(ahc, SXFRCTL0,
3515                                  ahc_inb(ahc, SXFRCTL0) | SPIOEN);
3516                 }
3517
3518                 break;
3519         }
3520         default:
3521                 panic("Unknown REQINIT message type");
3522         }
3523
3524         if (end_session) {
3525                 ahc_clear_msg_state(ahc);
3526                 ahc_outb(ahc, RETURN_1, EXIT_MSG_LOOP);
3527         } else
3528                 ahc_outb(ahc, RETURN_1, CONT_MSG_LOOP);
3529 }
3530
3531 /*
3532  * See if we sent a particular extended message to the target.
3533  * If "full" is true, return true only if the target saw the full
3534  * message.  If "full" is false, return true if the target saw at
3535  * least the first byte of the message.
3536  */
3537 static int
3538 ahc_sent_msg(struct ahc_softc *ahc, ahc_msgtype type, u_int msgval, int full)
3539 {
3540         int found;
3541         u_int index;
3542
3543         found = FALSE;
3544         index = 0;
3545
3546         while (index < ahc->msgout_len) {
3547                 if (ahc->msgout_buf[index] == MSG_EXTENDED) {
3548                         u_int end_index;
3549
3550                         end_index = index + 1 + ahc->msgout_buf[index + 1];
3551                         if (ahc->msgout_buf[index+2] == msgval
3552                          && type == AHCMSG_EXT) {
3553
3554                                 if (full) {
3555                                         if (ahc->msgout_index > end_index)
3556                                                 found = TRUE;
3557                                 } else if (ahc->msgout_index > index)
3558                                         found = TRUE;
3559                         }
3560                         index = end_index;
3561                 } else if (ahc->msgout_buf[index] >= MSG_SIMPLE_TASK
3562                         && ahc->msgout_buf[index] <= MSG_IGN_WIDE_RESIDUE) {
3563
3564                         /* Skip tag type and tag id or residue param*/
3565                         index += 2;
3566                 } else {
3567                         /* Single byte message */
3568                         if (type == AHCMSG_1B
3569                          && ahc->msgout_buf[index] == msgval
3570                          && ahc->msgout_index > index)
3571                                 found = TRUE;
3572                         index++;
3573                 }
3574
3575                 if (found)
3576                         break;
3577         }
3578         return (found);
3579 }
3580
3581 /*
3582  * Wait for a complete incoming message, parse it, and respond accordingly.
3583  */
3584 static int
3585 ahc_parse_msg(struct ahc_softc *ahc, struct ahc_devinfo *devinfo)
3586 {
3587         struct  ahc_initiator_tinfo *tinfo;
3588         struct  ahc_tmode_tstate *tstate;
3589         int     reject;
3590         int     done;
3591         int     response;
3592         u_int   targ_scsirate;
3593
3594         done = MSGLOOP_IN_PROG;
3595         response = FALSE;
3596         reject = FALSE;
3597         tinfo = ahc_fetch_transinfo(ahc, devinfo->channel, devinfo->our_scsiid,
3598                                     devinfo->target, &tstate);
3599         targ_scsirate = tinfo->scsirate;
3600
3601         /*
3602          * Parse as much of the message as is available,
3603          * rejecting it if we don't support it.  When
3604          * the entire message is available and has been
3605          * handled, return MSGLOOP_MSGCOMPLETE, indicating
3606          * that we have parsed an entire message.
3607          *
3608          * In the case of extended messages, we accept the length
3609          * byte outright and perform more checking once we know the
3610          * extended message type.
3611          */
3612         switch (ahc->msgin_buf[0]) {
3613         case MSG_DISCONNECT:
3614         case MSG_SAVEDATAPOINTER:
3615         case MSG_CMDCOMPLETE:
3616         case MSG_RESTOREPOINTERS:
3617         case MSG_IGN_WIDE_RESIDUE:
3618                 /*
3619                  * End our message loop as these are messages
3620                  * the sequencer handles on its own.
3621                  */
3622                 done = MSGLOOP_TERMINATED;
3623                 break;
3624         case MSG_MESSAGE_REJECT:
3625                 response = ahc_handle_msg_reject(ahc, devinfo);
3626                 /* FALLTHROUGH */
3627         case MSG_NOOP:
3628                 done = MSGLOOP_MSGCOMPLETE;
3629                 break;
3630         case MSG_EXTENDED:
3631         {
3632                 /* Wait for enough of the message to begin validation */
3633                 if (ahc->msgin_index < 2)
3634                         break;
3635                 switch (ahc->msgin_buf[2]) {
3636                 case MSG_EXT_SDTR:
3637                 {
3638                         const struct ahc_syncrate *syncrate;
3639                         u_int    period;
3640                         u_int    ppr_options;
3641                         u_int    offset;
3642                         u_int    saved_offset;
3643
3644                         if (ahc->msgin_buf[1] != MSG_EXT_SDTR_LEN) {
3645                                 reject = TRUE;
3646                                 break;
3647                         }
3648
3649                         /*
3650                          * Wait until we have both args before validating
3651                          * and acting on this message.
3652                          *
3653                          * Add one to MSG_EXT_SDTR_LEN to account for
3654                          * the extended message preamble.
3655                          */
3656                         if (ahc->msgin_index < (MSG_EXT_SDTR_LEN + 1))
3657                                 break;
3658
3659                         period = ahc->msgin_buf[3];
3660                         ppr_options = 0;
3661                         saved_offset = offset = ahc->msgin_buf[4];
3662                         syncrate = ahc_devlimited_syncrate(ahc, tinfo, &period,
3663                                                            &ppr_options,
3664                                                            devinfo->role);
3665                         ahc_validate_offset(ahc, tinfo, syncrate, &offset,
3666                                             targ_scsirate & WIDEXFER,
3667                                             devinfo->role);
3668                         if (bootverbose) {
3669                                 printf("(%s:%c:%d:%d): Received "
3670                                        "SDTR period %x, offset %x\n\t"
3671                                        "Filtered to period %x, offset %x\n",
3672                                        ahc_name(ahc), devinfo->channel,
3673                                        devinfo->target, devinfo->lun,
3674                                        ahc->msgin_buf[3], saved_offset,
3675                                        period, offset);
3676                         }
3677                         ahc_set_syncrate(ahc, devinfo,
3678                                          syncrate, period,
3679                                          offset, ppr_options,
3680                                          AHC_TRANS_ACTIVE|AHC_TRANS_GOAL,
3681                                          /*paused*/TRUE);
3682
3683                         /*
3684                          * See if we initiated Sync Negotiation
3685                          * and didn't have to fall down to async
3686                          * transfers.
3687                          */
3688                         if (ahc_sent_msg(ahc, AHCMSG_EXT, MSG_EXT_SDTR, TRUE)) {
3689                                 /* We started it */
3690                                 if (saved_offset != offset) {
3691                                         /* Went too low - force async */
3692                                         reject = TRUE;
3693                                 }
3694                         } else {
3695                                 /*
3696                                  * Send our own SDTR in reply
3697                                  */
3698                                 if (bootverbose
3699                                  && devinfo->role == ROLE_INITIATOR) {
3700                                         printf("(%s:%c:%d:%d): Target "
3701                                                "Initiated SDTR\n",
3702                                                ahc_name(ahc), devinfo->channel,
3703                                                devinfo->target, devinfo->lun);
3704                                 }
3705                                 ahc->msgout_index = 0;
3706                                 ahc->msgout_len = 0;
3707                                 ahc_construct_sdtr(ahc, devinfo,
3708                                                    period, offset);
3709                                 ahc->msgout_index = 0;
3710                                 response = TRUE;
3711                         }
3712                         done = MSGLOOP_MSGCOMPLETE;
3713                         break;
3714                 }
3715                 case MSG_EXT_WDTR:
3716                 {
3717                         u_int bus_width;
3718                         u_int saved_width;
3719                         u_int sending_reply;
3720
3721                         sending_reply = FALSE;
3722                         if (ahc->msgin_buf[1] != MSG_EXT_WDTR_LEN) {
3723                                 reject = TRUE;
3724                                 break;
3725                         }
3726
3727                         /*
3728                          * Wait until we have our arg before validating
3729                          * and acting on this message.
3730                          *
3731                          * Add one to MSG_EXT_WDTR_LEN to account for
3732                          * the extended message preamble.
3733                          */
3734                         if (ahc->msgin_index < (MSG_EXT_WDTR_LEN + 1))
3735                                 break;
3736
3737                         bus_width = ahc->msgin_buf[3];
3738                         saved_width = bus_width;
3739                         ahc_validate_width(ahc, tinfo, &bus_width,
3740                                            devinfo->role);
3741                         if (bootverbose) {
3742                                 printf("(%s:%c:%d:%d): Received WDTR "
3743                                        "%x filtered to %x\n",
3744                                        ahc_name(ahc), devinfo->channel,
3745                                        devinfo->target, devinfo->lun,
3746                                        saved_width, bus_width);
3747                         }
3748
3749                         if (ahc_sent_msg(ahc, AHCMSG_EXT, MSG_EXT_WDTR, TRUE)) {
3750                                 /*
3751                                  * Don't send a WDTR back to the
3752                                  * target, since we asked first.
3753                                  * If the width went higher than our
3754                                  * request, reject it.
3755                                  */
3756                                 if (saved_width > bus_width) {
3757                                         reject = TRUE;
3758                                         printf("(%s:%c:%d:%d): requested %dBit "
3759                                                "transfers.  Rejecting...\n",
3760                                                ahc_name(ahc), devinfo->channel,
3761                                                devinfo->target, devinfo->lun,
3762                                                8 * (0x01 << bus_width));
3763                                         bus_width = 0;
3764                                 }
3765                         } else {
3766                                 /*
3767                                  * Send our own WDTR in reply
3768                                  */
3769                                 if (bootverbose
3770                                  && devinfo->role == ROLE_INITIATOR) {
3771                                         printf("(%s:%c:%d:%d): Target "
3772                                                "Initiated WDTR\n",
3773                                                ahc_name(ahc), devinfo->channel,
3774                                                devinfo->target, devinfo->lun);
3775                                 }
3776                                 ahc->msgout_index = 0;
3777                                 ahc->msgout_len = 0;
3778                                 ahc_construct_wdtr(ahc, devinfo, bus_width);
3779                                 ahc->msgout_index = 0;
3780                                 response = TRUE;
3781                                 sending_reply = TRUE;
3782                         }
3783                         /*
3784                          * After a wide message, we are async, but
3785                          * some devices don't seem to honor this portion
3786                          * of the spec.  Force a renegotiation of the
3787                          * sync component of our transfer agreement even
3788                          * if our goal is async.  By updating our width
3789                          * after forcing the negotiation, we avoid
3790                          * renegotiating for width.
3791                          */
3792                         ahc_update_neg_request(ahc, devinfo, tstate,
3793                                                tinfo, AHC_NEG_ALWAYS);
3794                         ahc_set_width(ahc, devinfo, bus_width,
3795                                       AHC_TRANS_ACTIVE|AHC_TRANS_GOAL,
3796                                       /*paused*/TRUE);
3797                         if (sending_reply == FALSE && reject == FALSE) {
3798
3799                                 /*
3800                                  * We will always have an SDTR to send.
3801                                  */
3802                                 ahc->msgout_index = 0;
3803                                 ahc->msgout_len = 0;
3804                                 ahc_build_transfer_msg(ahc, devinfo);
3805                                 ahc->msgout_index = 0;
3806                                 response = TRUE;
3807                         }
3808                         done = MSGLOOP_MSGCOMPLETE;
3809                         break;
3810                 }
3811                 case MSG_EXT_PPR:
3812                 {
3813                         const struct ahc_syncrate *syncrate;
3814                         u_int   period;
3815                         u_int   offset;
3816                         u_int   bus_width;
3817                         u_int   ppr_options;
3818                         u_int   saved_width;
3819                         u_int   saved_offset;
3820                         u_int   saved_ppr_options;
3821
3822                         if (ahc->msgin_buf[1] != MSG_EXT_PPR_LEN) {
3823                                 reject = TRUE;
3824                                 break;
3825                         }
3826
3827                         /*
3828                          * Wait until we have all args before validating
3829                          * and acting on this message.
3830                          *
3831                          * Add one to MSG_EXT_PPR_LEN to account for
3832                          * the extended message preamble.
3833                          */
3834                         if (ahc->msgin_index < (MSG_EXT_PPR_LEN + 1))
3835                                 break;
3836
3837                         period = ahc->msgin_buf[3];
3838                         offset = ahc->msgin_buf[5];
3839                         bus_width = ahc->msgin_buf[6];
3840                         saved_width = bus_width;
3841                         ppr_options = ahc->msgin_buf[7];
3842                         /*
3843                          * According to the spec, a DT only
3844                          * period factor with no DT option
3845                          * set implies async.
3846                          */
3847                         if ((ppr_options & MSG_EXT_PPR_DT_REQ) == 0
3848                          && period == 9)
3849                                 offset = 0;
3850                         saved_ppr_options = ppr_options;
3851                         saved_offset = offset;
3852
3853                         /*
3854                          * Mask out any options we don't support
3855                          * on any controller.  Transfer options are
3856                          * only available if we are negotiating wide.
3857                          */
3858                         ppr_options &= MSG_EXT_PPR_DT_REQ;
3859                         if (bus_width == 0)
3860                                 ppr_options = 0;
3861
3862                         ahc_validate_width(ahc, tinfo, &bus_width,
3863                                            devinfo->role);
3864                         syncrate = ahc_devlimited_syncrate(ahc, tinfo, &period,
3865                                                            &ppr_options,
3866                                                            devinfo->role);
3867                         ahc_validate_offset(ahc, tinfo, syncrate,
3868                                             &offset, bus_width,
3869                                             devinfo->role);
3870
3871                         if (ahc_sent_msg(ahc, AHCMSG_EXT, MSG_EXT_PPR, TRUE)) {
3872                                 /*
3873                                  * If we are unable to do any of the
3874                                  * requested options (we went too low),
3875                                  * then we'll have to reject the message.
3876                                  */
3877                                 if (saved_width > bus_width
3878                                  || saved_offset != offset
3879                                  || saved_ppr_options != ppr_options) {
3880                                         reject = TRUE;
3881                                         period = 0;
3882                                         offset = 0;
3883                                         bus_width = 0;
3884                                         ppr_options = 0;
3885                                         syncrate = NULL;
3886                                 }
3887                         } else {
3888                                 if (devinfo->role != ROLE_TARGET)
3889                                         printf("(%s:%c:%d:%d): Target "
3890                                                "Initiated PPR\n",
3891                                                ahc_name(ahc), devinfo->channel,
3892                                                devinfo->target, devinfo->lun);
3893                                 else
3894                                         printf("(%s:%c:%d:%d): Initiator "
3895                                                "Initiated PPR\n",
3896                                                ahc_name(ahc), devinfo->channel,
3897                                                devinfo->target, devinfo->lun);
3898                                 ahc->msgout_index = 0;
3899                                 ahc->msgout_len = 0;
3900                                 ahc_construct_ppr(ahc, devinfo, period, offset,
3901                                                   bus_width, ppr_options);
3902                                 ahc->msgout_index = 0;
3903                                 response = TRUE;
3904                         }
3905                         if (bootverbose) {
3906                                 printf("(%s:%c:%d:%d): Received PPR width %x, "
3907                                        "period %x, offset %x,options %x\n"
3908                                        "\tFiltered to width %x, period %x, "
3909                                        "offset %x, options %x\n",
3910                                        ahc_name(ahc), devinfo->channel,
3911                                        devinfo->target, devinfo->lun,
3912                                        saved_width, ahc->msgin_buf[3],
3913                                        saved_offset, saved_ppr_options,
3914                                        bus_width, period, offset, ppr_options);
3915                         }
3916                         ahc_set_width(ahc, devinfo, bus_width,
3917                                       AHC_TRANS_ACTIVE|AHC_TRANS_GOAL,
3918                                       /*paused*/TRUE);
3919                         ahc_set_syncrate(ahc, devinfo,
3920                                          syncrate, period,
3921                                          offset, ppr_options,
3922                                          AHC_TRANS_ACTIVE|AHC_TRANS_GOAL,
3923                                          /*paused*/TRUE);
3924                         done = MSGLOOP_MSGCOMPLETE;
3925                         break;
3926                 }
3927                 default:
3928                         /* Unknown extended message.  Reject it. */
3929                         reject = TRUE;
3930                         break;
3931                 }
3932                 break;
3933         }
3934 #ifdef AHC_TARGET_MODE
3935         case MSG_BUS_DEV_RESET:
3936                 ahc_handle_devreset(ahc, devinfo,
3937                                     CAM_BDR_SENT,
3938                                     "Bus Device Reset Received",
3939                                     /*verbose_level*/0);
3940                 ahc_restart(ahc);
3941                 done = MSGLOOP_TERMINATED;
3942                 break;
3943         case MSG_ABORT_TAG:
3944         case MSG_ABORT:
3945         case MSG_CLEAR_QUEUE:
3946         {
3947                 int tag;
3948
3949                 /* Target mode messages */
3950                 if (devinfo->role != ROLE_TARGET) {
3951                         reject = TRUE;
3952                         break;
3953                 }
3954                 tag = SCB_LIST_NULL;
3955                 if (ahc->msgin_buf[0] == MSG_ABORT_TAG)
3956                         tag = ahc_inb(ahc, INITIATOR_TAG);
3957                 ahc_abort_scbs(ahc, devinfo->target, devinfo->channel,
3958                                devinfo->lun, tag, ROLE_TARGET,
3959                                CAM_REQ_ABORTED);
3960
3961                 tstate = ahc->enabled_targets[devinfo->our_scsiid];
3962                 if (tstate != NULL) {
3963                         struct ahc_tmode_lstate* lstate;
3964
3965                         lstate = tstate->enabled_luns[devinfo->lun];
3966                         if (lstate != NULL) {
3967                                 ahc_queue_lstate_event(ahc, lstate,
3968                                                        devinfo->our_scsiid,
3969                                                        ahc->msgin_buf[0],
3970                                                        /*arg*/tag);
3971                                 ahc_send_lstate_events(ahc, lstate);
3972                         }
3973                 }
3974                 ahc_restart(ahc);
3975                 done = MSGLOOP_TERMINATED;
3976                 break;
3977         }
3978 #endif
3979         case MSG_TERM_IO_PROC:
3980         default:
3981                 reject = TRUE;
3982                 break;
3983         }
3984
3985         if (reject) {
3986                 /*
3987                  * Setup to reject the message.
3988                  */
3989                 ahc->msgout_index = 0;
3990                 ahc->msgout_len = 1;
3991                 ahc->msgout_buf[0] = MSG_MESSAGE_REJECT;
3992                 done = MSGLOOP_MSGCOMPLETE;
3993                 response = TRUE;
3994         }
3995
3996         if (done != MSGLOOP_IN_PROG && !response)
3997                 /* Clear the outgoing message buffer */
3998                 ahc->msgout_len = 0;
3999
4000         return (done);
4001 }
4002
4003 /*
4004  * Process a message reject message.
4005  */
4006 static int
4007 ahc_handle_msg_reject(struct ahc_softc *ahc, struct ahc_devinfo *devinfo)
4008 {
4009         /*
4010          * What we care about here is if we had an
4011          * outstanding SDTR or WDTR message for this
4012          * target.  If we did, this is a signal that
4013          * the target is refusing negotiation.
4014          */
4015         struct scb *scb;
4016         struct ahc_initiator_tinfo *tinfo;
4017         struct ahc_tmode_tstate *tstate;
4018         u_int scb_index;
4019         u_int last_msg;
4020         int   response = 0;
4021
4022         scb_index = ahc_inb(ahc, SCB_TAG);
4023         scb = ahc_lookup_scb(ahc, scb_index);
4024         tinfo = ahc_fetch_transinfo(ahc, devinfo->channel,
4025                                     devinfo->our_scsiid,
4026                                     devinfo->target, &tstate);
4027         /* Might be necessary */
4028         last_msg = ahc_inb(ahc, LAST_MSG);
4029
4030         if (ahc_sent_msg(ahc, AHCMSG_EXT, MSG_EXT_PPR, /*full*/FALSE)) {
4031                 /*
4032                  * Target does not support the PPR message.
4033                  * Attempt to negotiate SPI-2 style.
4034                  */
4035                 if (bootverbose) {
4036                         printf("(%s:%c:%d:%d): PPR Rejected. "
4037                                "Trying WDTR/SDTR\n",
4038                                ahc_name(ahc), devinfo->channel,
4039                                devinfo->target, devinfo->lun);
4040                 }
4041                 tinfo->goal.ppr_options = 0;
4042                 tinfo->curr.transport_version = 2;
4043                 tinfo->goal.transport_version = 2;
4044                 ahc->msgout_index = 0;
4045                 ahc->msgout_len = 0;
4046                 ahc_build_transfer_msg(ahc, devinfo);
4047                 ahc->msgout_index = 0;
4048                 response = 1;
4049         } else if (ahc_sent_msg(ahc, AHCMSG_EXT, MSG_EXT_WDTR, /*full*/FALSE)) {
4050
4051                 /* note 8bit xfers */
4052                 printf("(%s:%c:%d:%d): refuses WIDE negotiation.  Using "
4053                        "8bit transfers\n", ahc_name(ahc),
4054                        devinfo->channel, devinfo->target, devinfo->lun);
4055                 ahc_set_width(ahc, devinfo, MSG_EXT_WDTR_BUS_8_BIT,
4056                               AHC_TRANS_ACTIVE|AHC_TRANS_GOAL,
4057                               /*paused*/TRUE);
4058                 /*
4059                  * No need to clear the sync rate.  If the target
4060                  * did not accept the command, our syncrate is
4061                  * unaffected.  If the target started the negotiation,
4062                  * but rejected our response, we already cleared the
4063                  * sync rate before sending our WDTR.
4064                  */
4065                 if (tinfo->goal.offset != tinfo->curr.offset) {
4066
4067                         /* Start the sync negotiation */
4068                         ahc->msgout_index = 0;
4069                         ahc->msgout_len = 0;
4070                         ahc_build_transfer_msg(ahc, devinfo);
4071                         ahc->msgout_index = 0;
4072                         response = 1;
4073                 }
4074         } else if (ahc_sent_msg(ahc, AHCMSG_EXT, MSG_EXT_SDTR, /*full*/FALSE)) {
4075                 /* note asynch xfers and clear flag */
4076                 ahc_set_syncrate(ahc, devinfo, /*syncrate*/NULL, /*period*/0,
4077                                  /*offset*/0, /*ppr_options*/0,
4078                                  AHC_TRANS_ACTIVE|AHC_TRANS_GOAL,
4079                                  /*paused*/TRUE);
4080                 printf("(%s:%c:%d:%d): refuses synchronous negotiation. "
4081                        "Using asynchronous transfers\n",
4082                        ahc_name(ahc), devinfo->channel,
4083                        devinfo->target, devinfo->lun);
4084         } else if ((scb->hscb->control & MSG_SIMPLE_TASK) != 0) {
4085                 int tag_type;
4086                 int mask;
4087
4088                 tag_type = (scb->hscb->control & MSG_SIMPLE_TASK);
4089
4090                 if (tag_type == MSG_SIMPLE_TASK) {
4091                         printf("(%s:%c:%d:%d): refuses tagged commands.  "
4092                                "Performing non-tagged I/O\n", ahc_name(ahc),
4093                                devinfo->channel, devinfo->target, devinfo->lun);
4094                         ahc_set_tags(ahc, scb->io_ctx, devinfo, AHC_QUEUE_NONE);
4095                         mask = ~0x23;
4096                 } else {
4097                         printf("(%s:%c:%d:%d): refuses %s tagged commands.  "
4098                                "Performing simple queue tagged I/O only\n",
4099                                ahc_name(ahc), devinfo->channel, devinfo->target,
4100                                devinfo->lun, tag_type == MSG_ORDERED_TASK
4101                                ? "ordered" : "head of queue");
4102                         ahc_set_tags(ahc, scb->io_ctx, devinfo, AHC_QUEUE_BASIC);
4103                         mask = ~0x03;
4104                 }
4105
4106                 /*
4107                  * Resend the identify for this CCB as the target
4108                  * may believe that the selection is invalid otherwise.
4109                  */
4110                 ahc_outb(ahc, SCB_CONTROL,
4111                          ahc_inb(ahc, SCB_CONTROL) & mask);
4112                 scb->hscb->control &= mask;
4113                 ahc_set_transaction_tag(scb, /*enabled*/FALSE,
4114                                         /*type*/MSG_SIMPLE_TASK);
4115                 ahc_outb(ahc, MSG_OUT, MSG_IDENTIFYFLAG);
4116                 ahc_assert_atn(ahc);
4117
4118                 /*
4119                  * This transaction is now at the head of
4120                  * the untagged queue for this target.
4121                  */
4122                 if ((ahc->flags & AHC_SCB_BTT) == 0) {
4123                         struct scb_tailq *untagged_q;
4124
4125                         untagged_q =
4126                             &(ahc->untagged_queues[devinfo->target_offset]);
4127                         TAILQ_INSERT_HEAD(untagged_q, scb, links.tqe);
4128                         scb->flags |= SCB_UNTAGGEDQ;
4129                 }
4130                 ahc_busy_tcl(ahc, BUILD_TCL(scb->hscb->scsiid, devinfo->lun),
4131                              scb->hscb->tag);
4132
4133                 /*
4134                  * Requeue all tagged commands for this target
4135                  * currently in our posession so they can be
4136                  * converted to untagged commands.
4137                  */
4138                 ahc_search_qinfifo(ahc, SCB_GET_TARGET(ahc, scb),
4139                                    SCB_GET_CHANNEL(ahc, scb),
4140                                    SCB_GET_LUN(scb), /*tag*/SCB_LIST_NULL,
4141                                    ROLE_INITIATOR, CAM_REQUEUE_REQ,
4142                                    SEARCH_COMPLETE);
4143         } else {
4144                 /*
4145                  * Otherwise, we ignore it.
4146                  */
4147                 printf("%s:%c:%d: Message reject for %x -- ignored\n",
4148                        ahc_name(ahc), devinfo->channel, devinfo->target,
4149                        last_msg);
4150         }
4151         return (response);
4152 }
4153
4154 /*
4155  * Process an ingnore wide residue message.
4156  */
4157 static void
4158 ahc_handle_ign_wide_residue(struct ahc_softc *ahc, struct ahc_devinfo *devinfo)
4159 {
4160         u_int scb_index;
4161         struct scb *scb;
4162
4163         scb_index = ahc_inb(ahc, SCB_TAG);
4164         scb = ahc_lookup_scb(ahc, scb_index);
4165         /*
4166          * XXX Actually check data direction in the sequencer?
4167          * Perhaps add datadir to some spare bits in the hscb?
4168          */
4169         if ((ahc_inb(ahc, SEQ_FLAGS) & DPHASE) == 0
4170          || ahc_get_transfer_dir(scb) != CAM_DIR_IN) {
4171                 /*
4172                  * Ignore the message if we haven't
4173                  * seen an appropriate data phase yet.
4174                  */
4175         } else {
4176                 /*
4177                  * If the residual occurred on the last
4178                  * transfer and the transfer request was
4179                  * expected to end on an odd count, do
4180                  * nothing.  Otherwise, subtract a byte
4181                  * and update the residual count accordingly.
4182                  */
4183                 uint32_t sgptr;
4184
4185                 sgptr = ahc_inb(ahc, SCB_RESIDUAL_SGPTR);
4186                 if ((sgptr & SG_LIST_NULL) != 0
4187                  && (ahc_inb(ahc, SCB_LUN) & SCB_XFERLEN_ODD) != 0) {
4188                         /*
4189                          * If the residual occurred on the last
4190                          * transfer and the transfer request was
4191                          * expected to end on an odd count, do
4192                          * nothing.
4193                          */
4194                 } else {
4195                         struct ahc_dma_seg *sg;
4196                         uint32_t data_cnt;
4197                         uint32_t data_addr;
4198                         uint32_t sglen;
4199
4200                         /* Pull in all of the sgptr */
4201                         sgptr = ahc_inl(ahc, SCB_RESIDUAL_SGPTR);
4202                         data_cnt = ahc_inl(ahc, SCB_RESIDUAL_DATACNT);
4203
4204                         if ((sgptr & SG_LIST_NULL) != 0) {
4205                                 /*
4206                                  * The residual data count is not updated
4207                                  * for the command run to completion case.
4208                                  * Explicitly zero the count.
4209                                  */
4210                                 data_cnt &= ~AHC_SG_LEN_MASK;
4211                         }
4212
4213                         data_addr = ahc_inl(ahc, SHADDR);
4214
4215                         data_cnt += 1;
4216                         data_addr -= 1;
4217                         sgptr &= SG_PTR_MASK;
4218
4219                         sg = ahc_sg_bus_to_virt(scb, sgptr);
4220
4221                         /*
4222                          * The residual sg ptr points to the next S/G
4223                          * to load so we must go back one.
4224                          */
4225                         sg--;
4226                         sglen = ahc_le32toh(sg->len) & AHC_SG_LEN_MASK;
4227                         if (sg != scb->sg_list
4228                          && sglen < (data_cnt & AHC_SG_LEN_MASK)) {
4229
4230                                 sg--;
4231                                 sglen = ahc_le32toh(sg->len);
4232                                 /*
4233                                  * Preserve High Address and SG_LIST bits
4234                                  * while setting the count to 1.
4235                                  */
4236                                 data_cnt = 1 | (sglen & (~AHC_SG_LEN_MASK));
4237                                 data_addr = ahc_le32toh(sg->addr)
4238                                           + (sglen & AHC_SG_LEN_MASK) - 1;
4239
4240                                 /*
4241                                  * Increment sg so it points to the
4242                                  * "next" sg.
4243                                  */
4244                                 sg++;
4245                                 sgptr = ahc_sg_virt_to_bus(scb, sg);
4246                         }
4247                         ahc_outl(ahc, SCB_RESIDUAL_SGPTR, sgptr);
4248                         ahc_outl(ahc, SCB_RESIDUAL_DATACNT, data_cnt);
4249                         /*
4250                          * Toggle the "oddness" of the transfer length
4251                          * to handle this mid-transfer ignore wide
4252                          * residue.  This ensures that the oddness is
4253                          * correct for subsequent data transfers.
4254                          */
4255                         ahc_outb(ahc, SCB_LUN,
4256                                  ahc_inb(ahc, SCB_LUN) ^ SCB_XFERLEN_ODD);
4257                 }
4258         }
4259 }
4260
4261
4262 /*
4263  * Reinitialize the data pointers for the active transfer
4264  * based on its current residual.
4265  */
4266 static void
4267 ahc_reinitialize_dataptrs(struct ahc_softc *ahc)
4268 {
4269         struct   scb *scb;
4270         struct   ahc_dma_seg *sg;
4271         u_int    scb_index;
4272         uint32_t sgptr;
4273         uint32_t resid;
4274         uint32_t dataptr;
4275
4276         scb_index = ahc_inb(ahc, SCB_TAG);
4277         scb = ahc_lookup_scb(ahc, scb_index);
4278         sgptr = (ahc_inb(ahc, SCB_RESIDUAL_SGPTR + 3) << 24)
4279               | (ahc_inb(ahc, SCB_RESIDUAL_SGPTR + 2) << 16)
4280               | (ahc_inb(ahc, SCB_RESIDUAL_SGPTR + 1) << 8)
4281               | ahc_inb(ahc, SCB_RESIDUAL_SGPTR);
4282
4283         sgptr &= SG_PTR_MASK;
4284         sg = ahc_sg_bus_to_virt(scb, sgptr);
4285
4286         /* The residual sg_ptr always points to the next sg */
4287         sg--;
4288
4289         resid = (ahc_inb(ahc, SCB_RESIDUAL_DATACNT + 2) << 16)
4290               | (ahc_inb(ahc, SCB_RESIDUAL_DATACNT + 1) << 8)
4291               | ahc_inb(ahc, SCB_RESIDUAL_DATACNT);
4292
4293         dataptr = ahc_le32toh(sg->addr)
4294                 + (ahc_le32toh(sg->len) & AHC_SG_LEN_MASK)
4295                 - resid;
4296         if ((ahc->flags & AHC_39BIT_ADDRESSING) != 0) {
4297                 u_int dscommand1;
4298
4299                 dscommand1 = ahc_inb(ahc, DSCOMMAND1);
4300                 ahc_outb(ahc, DSCOMMAND1, dscommand1 | HADDLDSEL0);
4301                 ahc_outb(ahc, HADDR,
4302                          (ahc_le32toh(sg->len) >> 24) & SG_HIGH_ADDR_BITS);
4303                 ahc_outb(ahc, DSCOMMAND1, dscommand1);
4304         }
4305         ahc_outb(ahc, HADDR + 3, dataptr >> 24);
4306         ahc_outb(ahc, HADDR + 2, dataptr >> 16);
4307         ahc_outb(ahc, HADDR + 1, dataptr >> 8);
4308         ahc_outb(ahc, HADDR, dataptr);
4309         ahc_outb(ahc, HCNT + 2, resid >> 16);
4310         ahc_outb(ahc, HCNT + 1, resid >> 8);
4311         ahc_outb(ahc, HCNT, resid);
4312         if ((ahc->features & AHC_ULTRA2) == 0) {
4313                 ahc_outb(ahc, STCNT + 2, resid >> 16);
4314                 ahc_outb(ahc, STCNT + 1, resid >> 8);
4315                 ahc_outb(ahc, STCNT, resid);
4316         }
4317 }
4318
4319 /*
4320  * Handle the effects of issuing a bus device reset message.
4321  */
4322 static void
4323 ahc_handle_devreset(struct ahc_softc *ahc, struct ahc_devinfo *devinfo,
4324                     cam_status status, char *message, int verbose_level)
4325 {
4326 #ifdef AHC_TARGET_MODE
4327         struct ahc_tmode_tstate* tstate;
4328         u_int lun;
4329 #endif
4330         int found;
4331
4332         found = ahc_abort_scbs(ahc, devinfo->target, devinfo->channel,
4333                                CAM_LUN_WILDCARD, SCB_LIST_NULL, devinfo->role,
4334                                status);
4335
4336 #ifdef AHC_TARGET_MODE
4337         /*
4338          * Send an immediate notify ccb to all target mord peripheral
4339          * drivers affected by this action.
4340          */
4341         tstate = ahc->enabled_targets[devinfo->our_scsiid];
4342         if (tstate != NULL) {
4343                 for (lun = 0; lun < AHC_NUM_LUNS; lun++) {
4344                         struct ahc_tmode_lstate* lstate;
4345
4346                         lstate = tstate->enabled_luns[lun];
4347                         if (lstate == NULL)
4348                                 continue;
4349
4350                         ahc_queue_lstate_event(ahc, lstate, devinfo->our_scsiid,
4351                                                MSG_BUS_DEV_RESET, /*arg*/0);
4352                         ahc_send_lstate_events(ahc, lstate);
4353                 }
4354         }
4355 #endif
4356
4357         /*
4358          * Go back to async/narrow transfers and renegotiate.
4359          */
4360         ahc_set_width(ahc, devinfo, MSG_EXT_WDTR_BUS_8_BIT,
4361                       AHC_TRANS_CUR, /*paused*/TRUE);
4362         ahc_set_syncrate(ahc, devinfo, /*syncrate*/NULL,
4363                          /*period*/0, /*offset*/0, /*ppr_options*/0,
4364                          AHC_TRANS_CUR, /*paused*/TRUE);
4365
4366         if (status != CAM_SEL_TIMEOUT)
4367                 ahc_send_async(ahc, devinfo->channel, devinfo->target,
4368                                CAM_LUN_WILDCARD, AC_SENT_BDR);
4369
4370         if (message != NULL
4371          && (verbose_level <= bootverbose))
4372                 printf("%s: %s on %c:%d. %d SCBs aborted\n", ahc_name(ahc),
4373                        message, devinfo->channel, devinfo->target, found);
4374 }
4375
4376 #ifdef AHC_TARGET_MODE
4377 static void
4378 ahc_setup_target_msgin(struct ahc_softc *ahc, struct ahc_devinfo *devinfo,
4379                        struct scb *scb)
4380 {
4381
4382         /*
4383          * To facilitate adding multiple messages together,
4384          * each routine should increment the index and len
4385          * variables instead of setting them explicitly.
4386          */
4387         ahc->msgout_index = 0;
4388         ahc->msgout_len = 0;
4389
4390         if (scb != NULL && (scb->flags & SCB_AUTO_NEGOTIATE) != 0)
4391                 ahc_build_transfer_msg(ahc, devinfo);
4392         else
4393                 panic("ahc_intr: AWAITING target message with no message");
4394
4395         ahc->msgout_index = 0;
4396         ahc->msg_type = MSG_TYPE_TARGET_MSGIN;
4397 }
4398 #endif
4399 /**************************** Initialization **********************************/
4400 /*
4401  * Allocate a controller structure for a new device
4402  * and perform initial initializion.
4403  */
4404 struct ahc_softc *
4405 ahc_alloc(void *platform_arg, char *name)
4406 {
4407         struct  ahc_softc *ahc;
4408         int     i;
4409
4410 #ifndef __FreeBSD__
4411         ahc = malloc(sizeof(*ahc), M_DEVBUF, M_NOWAIT);
4412         if (!ahc) {
4413                 printf("aic7xxx: cannot malloc softc!\n");
4414                 free(name, M_DEVBUF);
4415                 return NULL;
4416         }
4417 #else
4418         ahc = device_get_softc((device_t)platform_arg);
4419 #endif
4420         memset(ahc, 0, sizeof(*ahc));
4421         ahc->seep_config = malloc(sizeof(*ahc->seep_config),
4422                                   M_DEVBUF, M_NOWAIT);
4423         if (ahc->seep_config == NULL) {
4424 #ifndef __FreeBSD__
4425                 free(ahc, M_DEVBUF);
4426 #endif
4427                 free(name, M_DEVBUF);
4428                 return (NULL);
4429         }
4430         LIST_INIT(&ahc->pending_scbs);
4431         /* We don't know our unit number until the OSM sets it */
4432         ahc->name = name;
4433         ahc->unit = -1;
4434         ahc->description = NULL;
4435         ahc->channel = 'A';
4436         ahc->channel_b = 'B';
4437         ahc->chip = AHC_NONE;
4438         ahc->features = AHC_FENONE;
4439         ahc->bugs = AHC_BUGNONE;
4440         ahc->flags = AHC_FNONE;
4441         /*
4442          * Default to all error reporting enabled with the
4443          * sequencer operating at its fastest speed.
4444          * The bus attach code may modify this.
4445          */
4446         ahc->seqctl = FASTMODE;
4447
4448         for (i = 0; i < AHC_NUM_TARGETS; i++)
4449                 TAILQ_INIT(&ahc->untagged_queues[i]);
4450         if (ahc_platform_alloc(ahc, platform_arg) != 0) {
4451                 ahc_free(ahc);
4452                 ahc = NULL;
4453         }
4454         return (ahc);
4455 }
4456
4457 int
4458 ahc_softc_init(struct ahc_softc *ahc)
4459 {
4460
4461         /* The IRQMS bit is only valid on VL and EISA chips */
4462         if ((ahc->chip & AHC_PCI) == 0)
4463                 ahc->unpause = ahc_inb(ahc, HCNTRL) & IRQMS;
4464         else
4465                 ahc->unpause = 0;
4466         ahc->pause = ahc->unpause | PAUSE;
4467         /* XXX The shared scb data stuff should be deprecated */
4468         if (ahc->scb_data == NULL) {
4469                 ahc->scb_data = malloc(sizeof(*ahc->scb_data),
4470                                        M_DEVBUF, M_NOWAIT);
4471                 if (ahc->scb_data == NULL)
4472                         return (ENOMEM);
4473                 memset(ahc->scb_data, 0, sizeof(*ahc->scb_data));
4474         }
4475
4476         return (0);
4477 }
4478
4479 void
4480 ahc_set_unit(struct ahc_softc *ahc, int unit)
4481 {
4482         ahc->unit = unit;
4483 }
4484
4485 void
4486 ahc_set_name(struct ahc_softc *ahc, char *name)
4487 {
4488         if (ahc->name != NULL)
4489                 free(ahc->name, M_DEVBUF);
4490         ahc->name = name;
4491 }
4492
4493 void
4494 ahc_free(struct ahc_softc *ahc)
4495 {
4496         int i;
4497
4498         switch (ahc->init_level) {
4499         default:
4500         case 5:
4501                 ahc_shutdown(ahc);
4502                 /* FALLTHROUGH */
4503         case 4:
4504                 ahc_dmamap_unload(ahc, ahc->shared_data_dmat,
4505                                   ahc->shared_data_dmamap);
4506                 /* FALLTHROUGH */
4507         case 3:
4508                 ahc_dmamem_free(ahc, ahc->shared_data_dmat, ahc->qoutfifo,
4509                                 ahc->shared_data_dmamap);
4510                 ahc_dmamap_destroy(ahc, ahc->shared_data_dmat,
4511                                    ahc->shared_data_dmamap);
4512                 /* FALLTHROUGH */
4513         case 2:
4514                 ahc_dma_tag_destroy(ahc, ahc->shared_data_dmat);
4515         case 1:
4516 #ifndef __linux__
4517                 ahc_dma_tag_destroy(ahc, ahc->buffer_dmat);
4518 #endif
4519                 break;
4520         case 0:
4521                 break;
4522         }
4523
4524 #ifndef __linux__
4525         ahc_dma_tag_destroy(ahc, ahc->parent_dmat);
4526 #endif
4527         ahc_platform_free(ahc);
4528         ahc_fini_scbdata(ahc);
4529         for (i = 0; i < AHC_NUM_TARGETS; i++) {
4530                 struct ahc_tmode_tstate *tstate;
4531
4532                 tstate = ahc->enabled_targets[i];
4533                 if (tstate != NULL) {
4534 #ifdef AHC_TARGET_MODE
4535                         int j;
4536
4537                         for (j = 0; j < AHC_NUM_LUNS; j++) {
4538                                 struct ahc_tmode_lstate *lstate;
4539
4540                                 lstate = tstate->enabled_luns[j];
4541                                 if (lstate != NULL) {
4542                                         xpt_free_path(lstate->path);
4543                                         free(lstate, M_DEVBUF);
4544                                 }
4545                         }
4546 #endif
4547                         free(tstate, M_DEVBUF);
4548                 }
4549         }
4550 #ifdef AHC_TARGET_MODE
4551         if (ahc->black_hole != NULL) {
4552                 xpt_free_path(ahc->black_hole->path);
4553                 free(ahc->black_hole, M_DEVBUF);
4554         }
4555 #endif
4556         if (ahc->name != NULL)
4557                 free(ahc->name, M_DEVBUF);
4558         if (ahc->seep_config != NULL)
4559                 free(ahc->seep_config, M_DEVBUF);
4560 #ifndef __FreeBSD__
4561         free(ahc, M_DEVBUF);
4562 #endif
4563         return;
4564 }
4565
4566 static void
4567 ahc_shutdown(void *arg)
4568 {
4569         struct  ahc_softc *ahc;
4570         int     i;
4571
4572         ahc = (struct ahc_softc *)arg;
4573
4574         /* This will reset most registers to 0, but not all */
4575         ahc_reset(ahc, /*reinit*/FALSE);
4576         ahc_outb(ahc, SCSISEQ, 0);
4577         ahc_outb(ahc, SXFRCTL0, 0);
4578         ahc_outb(ahc, DSPCISTATUS, 0);
4579
4580         for (i = TARG_SCSIRATE; i < SCSICONF; i++)
4581                 ahc_outb(ahc, i, 0);
4582 }
4583
4584 /*
4585  * Reset the controller and record some information about it
4586  * that is only available just after a reset.  If "reinit" is
4587  * non-zero, this reset occured after initial configuration
4588  * and the caller requests that the chip be fully reinitialized
4589  * to a runable state.  Chip interrupts are *not* enabled after
4590  * a reinitialization.  The caller must enable interrupts via
4591  * ahc_intr_enable().
4592  */
4593 int
4594 ahc_reset(struct ahc_softc *ahc, int reinit)
4595 {
4596         u_int   sblkctl;
4597         u_int   sxfrctl1_a, sxfrctl1_b;
4598         int     error;
4599         int     wait;
4600
4601         /*
4602          * Preserve the value of the SXFRCTL1 register for all channels.
4603          * It contains settings that affect termination and we don't want
4604          * to disturb the integrity of the bus.
4605          */
4606         ahc_pause(ahc);
4607         sxfrctl1_b = 0;
4608         if ((ahc->chip & AHC_CHIPID_MASK) == AHC_AIC7770) {
4609                 u_int sblkctl;
4610
4611                 /*
4612                  * Save channel B's settings in case this chip
4613                  * is setup for TWIN channel operation.
4614                  */
4615                 sblkctl = ahc_inb(ahc, SBLKCTL);
4616                 ahc_outb(ahc, SBLKCTL, sblkctl | SELBUSB);
4617                 sxfrctl1_b = ahc_inb(ahc, SXFRCTL1);
4618                 ahc_outb(ahc, SBLKCTL, sblkctl & ~SELBUSB);
4619         }
4620         sxfrctl1_a = ahc_inb(ahc, SXFRCTL1);
4621
4622         ahc_outb(ahc, HCNTRL, CHIPRST | ahc->pause);
4623
4624         /*
4625          * Ensure that the reset has finished.  We delay 1000us
4626          * prior to reading the register to make sure the chip
4627          * has sufficiently completed its reset to handle register
4628          * accesses.
4629          */
4630         wait = 1000;
4631         do {
4632                 ahc_delay(1000);
4633         } while (--wait && !(ahc_inb(ahc, HCNTRL) & CHIPRSTACK));
4634
4635         if (wait == 0) {
4636                 printf("%s: WARNING - Failed chip reset!  "
4637                        "Trying to initialize anyway.\n", ahc_name(ahc));
4638         }
4639         ahc_outb(ahc, HCNTRL, ahc->pause);
4640
4641         /* Determine channel configuration */
4642         sblkctl = ahc_inb(ahc, SBLKCTL) & (SELBUSB|SELWIDE);
4643         /* No Twin Channel PCI cards */
4644         if ((ahc->chip & AHC_PCI) != 0)
4645                 sblkctl &= ~SELBUSB;
4646         switch (sblkctl) {
4647         case 0:
4648                 /* Single Narrow Channel */
4649                 break;
4650         case 2:
4651                 /* Wide Channel */
4652                 ahc->features |= AHC_WIDE;
4653                 break;
4654         case 8:
4655                 /* Twin Channel */
4656                 ahc->features |= AHC_TWIN;
4657                 break;
4658         default:
4659                 printf(" Unsupported adapter type.  Ignoring\n");
4660                 return(-1);
4661         }
4662
4663         /*
4664          * Reload sxfrctl1.
4665          *
4666          * We must always initialize STPWEN to 1 before we
4667          * restore the saved values.  STPWEN is initialized
4668          * to a tri-state condition which can only be cleared
4669          * by turning it on.
4670          */
4671         if ((ahc->features & AHC_TWIN) != 0) {
4672                 u_int sblkctl;
4673
4674                 sblkctl = ahc_inb(ahc, SBLKCTL);
4675                 ahc_outb(ahc, SBLKCTL, sblkctl | SELBUSB);
4676                 ahc_outb(ahc, SXFRCTL1, sxfrctl1_b);
4677                 ahc_outb(ahc, SBLKCTL, sblkctl & ~SELBUSB);
4678         }
4679         ahc_outb(ahc, SXFRCTL1, sxfrctl1_a);
4680
4681         error = 0;
4682         if (reinit != 0)
4683                 /*
4684                  * If a recovery action has forced a chip reset,
4685                  * re-initialize the chip to our liking.
4686                  */
4687                 error = ahc->bus_chip_init(ahc);
4688 #ifdef AHC_DUMP_SEQ
4689         else
4690                 ahc_dumpseq(ahc);
4691 #endif
4692
4693         return (error);
4694 }
4695
4696 /*
4697  * Determine the number of SCBs available on the controller
4698  */
4699 int
4700 ahc_probe_scbs(struct ahc_softc *ahc) {
4701         int i;
4702
4703         for (i = 0; i < AHC_SCB_MAX; i++) {
4704
4705                 ahc_outb(ahc, SCBPTR, i);
4706                 ahc_outb(ahc, SCB_BASE, i);
4707                 if (ahc_inb(ahc, SCB_BASE) != i)
4708                         break;
4709                 ahc_outb(ahc, SCBPTR, 0);
4710                 if (ahc_inb(ahc, SCB_BASE) != 0)
4711                         break;
4712         }
4713         return (i);
4714 }
4715
4716 static void
4717 ahc_dmamap_cb(void *arg, bus_dma_segment_t *segs, int nseg, int error)
4718 {
4719         dma_addr_t *baddr;
4720
4721         baddr = (dma_addr_t *)arg;
4722         *baddr = segs->ds_addr;
4723 }
4724
4725 static void
4726 ahc_build_free_scb_list(struct ahc_softc *ahc)
4727 {
4728         int scbsize;
4729         int i;
4730
4731         scbsize = 32;
4732         if ((ahc->flags & AHC_LSCBS_ENABLED) != 0)
4733                 scbsize = 64;
4734
4735         for (i = 0; i < ahc->scb_data->maxhscbs; i++) {
4736                 int j;
4737
4738                 ahc_outb(ahc, SCBPTR, i);
4739
4740                 /*
4741                  * Touch all SCB bytes to avoid parity errors
4742                  * should one of our debugging routines read
4743                  * an otherwise uninitiatlized byte.
4744                  */
4745                 for (j = 0; j < scbsize; j++)
4746                         ahc_outb(ahc, SCB_BASE+j, 0xFF);
4747
4748                 /* Clear the control byte. */
4749                 ahc_outb(ahc, SCB_CONTROL, 0);
4750
4751                 /* Set the next pointer */
4752                 if ((ahc->flags & AHC_PAGESCBS) != 0)
4753                         ahc_outb(ahc, SCB_NEXT, i+1);
4754                 else
4755                         ahc_outb(ahc, SCB_NEXT, SCB_LIST_NULL);
4756
4757                 /* Make the tag number, SCSIID, and lun invalid */
4758                 ahc_outb(ahc, SCB_TAG, SCB_LIST_NULL);
4759                 ahc_outb(ahc, SCB_SCSIID, 0xFF);
4760                 ahc_outb(ahc, SCB_LUN, 0xFF);
4761         }
4762
4763         if ((ahc->flags & AHC_PAGESCBS) != 0) {
4764                 /* SCB 0 heads the free list. */
4765                 ahc_outb(ahc, FREE_SCBH, 0);
4766         } else {
4767                 /* No free list. */
4768                 ahc_outb(ahc, FREE_SCBH, SCB_LIST_NULL);
4769         }
4770
4771         /* Make sure that the last SCB terminates the free list */
4772         ahc_outb(ahc, SCBPTR, i-1);
4773         ahc_outb(ahc, SCB_NEXT, SCB_LIST_NULL);
4774 }
4775
4776 static int
4777 ahc_init_scbdata(struct ahc_softc *ahc)
4778 {
4779         struct scb_data *scb_data;
4780
4781         scb_data = ahc->scb_data;
4782         SLIST_INIT(&scb_data->free_scbs);
4783         SLIST_INIT(&scb_data->sg_maps);
4784
4785         /* Allocate SCB resources */
4786         scb_data->scbarray =
4787             (struct scb *)malloc(sizeof(struct scb) * AHC_SCB_MAX_ALLOC,
4788                                  M_DEVBUF, M_NOWAIT);
4789         if (scb_data->scbarray == NULL)
4790                 return (ENOMEM);
4791         memset(scb_data->scbarray, 0, sizeof(struct scb) * AHC_SCB_MAX_ALLOC);
4792
4793         /* Determine the number of hardware SCBs and initialize them */
4794
4795         scb_data->maxhscbs = ahc_probe_scbs(ahc);
4796         if (ahc->scb_data->maxhscbs == 0) {
4797                 printf("%s: No SCB space found\n", ahc_name(ahc));
4798                 return (ENXIO);
4799         }
4800
4801         /*
4802          * Create our DMA tags.  These tags define the kinds of device
4803          * accessible memory allocations and memory mappings we will
4804          * need to perform during normal operation.
4805          *
4806          * Unless we need to further restrict the allocation, we rely
4807          * on the restrictions of the parent dmat, hence the common
4808          * use of MAXADDR and MAXSIZE.
4809          */
4810
4811         /* DMA tag for our hardware scb structures */
4812         if (ahc_dma_tag_create(ahc, ahc->parent_dmat, /*alignment*/1,
4813                                /*boundary*/BUS_SPACE_MAXADDR_32BIT + 1,
4814                                /*lowaddr*/BUS_SPACE_MAXADDR_32BIT,
4815                                /*highaddr*/BUS_SPACE_MAXADDR,
4816                                /*filter*/NULL, /*filterarg*/NULL,
4817                                AHC_SCB_MAX_ALLOC * sizeof(struct hardware_scb),
4818                                /*nsegments*/1,
4819                                /*maxsegsz*/BUS_SPACE_MAXSIZE_32BIT,
4820                                /*flags*/0, &scb_data->hscb_dmat) != 0) {
4821                 goto error_exit;
4822         }
4823
4824         scb_data->init_level++;
4825
4826         /* Allocation for our hscbs */
4827         if (ahc_dmamem_alloc(ahc, scb_data->hscb_dmat,
4828                              (void **)&scb_data->hscbs,
4829                              BUS_DMA_NOWAIT, &scb_data->hscb_dmamap) != 0) {
4830                 goto error_exit;
4831         }
4832
4833         scb_data->init_level++;
4834
4835         /* And permanently map them */
4836         ahc_dmamap_load(ahc, scb_data->hscb_dmat, scb_data->hscb_dmamap,
4837                         scb_data->hscbs,
4838                         AHC_SCB_MAX_ALLOC * sizeof(struct hardware_scb),
4839                         ahc_dmamap_cb, &scb_data->hscb_busaddr, /*flags*/0);
4840
4841         scb_data->init_level++;
4842
4843         /* DMA tag for our sense buffers */
4844         if (ahc_dma_tag_create(ahc, ahc->parent_dmat, /*alignment*/1,
4845                                /*boundary*/BUS_SPACE_MAXADDR_32BIT + 1,
4846                                /*lowaddr*/BUS_SPACE_MAXADDR_32BIT,
4847                                /*highaddr*/BUS_SPACE_MAXADDR,
4848                                /*filter*/NULL, /*filterarg*/NULL,
4849                                AHC_SCB_MAX_ALLOC * sizeof(struct scsi_sense_data),
4850                                /*nsegments*/1,
4851                                /*maxsegsz*/BUS_SPACE_MAXSIZE_32BIT,
4852                                /*flags*/0, &scb_data->sense_dmat) != 0) {
4853                 goto error_exit;
4854         }
4855
4856         scb_data->init_level++;
4857
4858         /* Allocate them */
4859         if (ahc_dmamem_alloc(ahc, scb_data->sense_dmat,
4860                              (void **)&scb_data->sense,
4861                              BUS_DMA_NOWAIT, &scb_data->sense_dmamap) != 0) {
4862                 goto error_exit;
4863         }
4864
4865         scb_data->init_level++;
4866
4867         /* And permanently map them */
4868         ahc_dmamap_load(ahc, scb_data->sense_dmat, scb_data->sense_dmamap,
4869                         scb_data->sense,
4870                         AHC_SCB_MAX_ALLOC * sizeof(struct scsi_sense_data),
4871                         ahc_dmamap_cb, &scb_data->sense_busaddr, /*flags*/0);
4872
4873         scb_data->init_level++;
4874
4875         /* DMA tag for our S/G structures.  We allocate in page sized chunks */
4876         if (ahc_dma_tag_create(ahc, ahc->parent_dmat, /*alignment*/8,
4877                                /*boundary*/BUS_SPACE_MAXADDR_32BIT + 1,
4878                                /*lowaddr*/BUS_SPACE_MAXADDR_32BIT,
4879                                /*highaddr*/BUS_SPACE_MAXADDR,
4880                                /*filter*/NULL, /*filterarg*/NULL,
4881                                PAGE_SIZE, /*nsegments*/1,
4882                                /*maxsegsz*/BUS_SPACE_MAXSIZE_32BIT,
4883                                /*flags*/0, &scb_data->sg_dmat) != 0) {
4884                 goto error_exit;
4885         }
4886
4887         scb_data->init_level++;
4888
4889         /* Perform initial CCB allocation */
4890         memset(scb_data->hscbs, 0,
4891                AHC_SCB_MAX_ALLOC * sizeof(struct hardware_scb));
4892         ahc_alloc_scbs(ahc);
4893
4894         if (scb_data->numscbs == 0) {
4895                 printf("%s: ahc_init_scbdata - "
4896                        "Unable to allocate initial scbs\n",
4897                        ahc_name(ahc));
4898                 goto error_exit;
4899         }
4900
4901         /*
4902          * Reserve the next queued SCB.
4903          */
4904         ahc->next_queued_scb = ahc_get_scb(ahc);
4905
4906         /*
4907          * Note that we were successfull
4908          */
4909         return (0);
4910
4911 error_exit:
4912
4913         return (ENOMEM);
4914 }
4915
4916 static void
4917 ahc_fini_scbdata(struct ahc_softc *ahc)
4918 {
4919         struct scb_data *scb_data;
4920
4921         scb_data = ahc->scb_data;
4922         if (scb_data == NULL)
4923                 return;
4924
4925         switch (scb_data->init_level) {
4926         default:
4927         case 7:
4928         {
4929                 struct sg_map_node *sg_map;
4930
4931                 while ((sg_map = SLIST_FIRST(&scb_data->sg_maps))!= NULL) {
4932                         SLIST_REMOVE_HEAD(&scb_data->sg_maps, links);
4933                         ahc_dmamap_unload(ahc, scb_data->sg_dmat,
4934                                           sg_map->sg_dmamap);
4935                         ahc_dmamem_free(ahc, scb_data->sg_dmat,
4936                                         sg_map->sg_vaddr,
4937                                         sg_map->sg_dmamap);
4938                         free(sg_map, M_DEVBUF);
4939                 }
4940                 ahc_dma_tag_destroy(ahc, scb_data->sg_dmat);
4941         }
4942         case 6:
4943                 ahc_dmamap_unload(ahc, scb_data->sense_dmat,
4944                                   scb_data->sense_dmamap);
4945         case 5:
4946                 ahc_dmamem_free(ahc, scb_data->sense_dmat, scb_data->sense,
4947                                 scb_data->sense_dmamap);
4948                 ahc_dmamap_destroy(ahc, scb_data->sense_dmat,
4949                                    scb_data->sense_dmamap);
4950         case 4:
4951                 ahc_dma_tag_destroy(ahc, scb_data->sense_dmat);
4952         case 3:
4953                 ahc_dmamap_unload(ahc, scb_data->hscb_dmat,
4954                                   scb_data->hscb_dmamap);
4955         case 2:
4956                 ahc_dmamem_free(ahc, scb_data->hscb_dmat, scb_data->hscbs,
4957                                 scb_data->hscb_dmamap);
4958                 ahc_dmamap_destroy(ahc, scb_data->hscb_dmat,
4959                                    scb_data->hscb_dmamap);
4960         case 1:
4961                 ahc_dma_tag_destroy(ahc, scb_data->hscb_dmat);
4962                 break;
4963         case 0:
4964                 break;
4965         }
4966         if (scb_data->scbarray != NULL)
4967                 free(scb_data->scbarray, M_DEVBUF);
4968 }
4969
4970 static void
4971 ahc_alloc_scbs(struct ahc_softc *ahc)
4972 {
4973         struct scb_data *scb_data;
4974         struct scb *next_scb;
4975         struct sg_map_node *sg_map;
4976         dma_addr_t physaddr;
4977         struct ahc_dma_seg *segs;
4978         int newcount;
4979         int i;
4980
4981         scb_data = ahc->scb_data;
4982         if (scb_data->numscbs >= AHC_SCB_MAX_ALLOC)
4983                 /* Can't allocate any more */
4984                 return;
4985
4986         next_scb = &scb_data->scbarray[scb_data->numscbs];
4987
4988         sg_map = malloc(sizeof(*sg_map), M_DEVBUF, M_NOWAIT);
4989
4990         if (sg_map == NULL)
4991                 return;
4992
4993         /* Allocate S/G space for the next batch of SCBS */
4994         if (ahc_dmamem_alloc(ahc, scb_data->sg_dmat,
4995                              (void **)&sg_map->sg_vaddr,
4996                              BUS_DMA_NOWAIT, &sg_map->sg_dmamap) != 0) {
4997                 free(sg_map, M_DEVBUF);
4998                 return;
4999         }
5000
5001         SLIST_INSERT_HEAD(&scb_data->sg_maps, sg_map, links);
5002
5003         ahc_dmamap_load(ahc, scb_data->sg_dmat, sg_map->sg_dmamap,
5004                         sg_map->sg_vaddr, PAGE_SIZE, ahc_dmamap_cb,
5005                         &sg_map->sg_physaddr, /*flags*/0);
5006
5007         segs = sg_map->sg_vaddr;
5008         physaddr = sg_map->sg_physaddr;
5009
5010         newcount = (PAGE_SIZE / (AHC_NSEG * sizeof(struct ahc_dma_seg)));
5011         newcount = min(newcount, (AHC_SCB_MAX_ALLOC - scb_data->numscbs));
5012         for (i = 0; i < newcount; i++) {
5013                 struct scb_platform_data *pdata;
5014 #ifndef __linux__
5015                 int error;
5016 #endif
5017                 pdata = (struct scb_platform_data *)malloc(sizeof(*pdata),
5018                                                            M_DEVBUF, M_NOWAIT);
5019                 if (pdata == NULL)
5020                         break;
5021                 next_scb->platform_data = pdata;
5022                 next_scb->sg_map = sg_map;
5023                 next_scb->sg_list = segs;
5024                 /*
5025                  * The sequencer always starts with the second entry.
5026                  * The first entry is embedded in the scb.
5027                  */
5028                 next_scb->sg_list_phys = physaddr + sizeof(struct ahc_dma_seg);
5029                 next_scb->ahc_softc = ahc;
5030                 next_scb->flags = SCB_FREE;
5031 #ifndef __linux__
5032                 error = ahc_dmamap_create(ahc, ahc->buffer_dmat, /*flags*/0,
5033                                           &next_scb->dmamap);
5034                 if (error != 0)
5035                         break;
5036 #endif
5037                 next_scb->hscb = &scb_data->hscbs[scb_data->numscbs];
5038                 next_scb->hscb->tag = ahc->scb_data->numscbs;
5039                 SLIST_INSERT_HEAD(&ahc->scb_data->free_scbs,
5040                                   next_scb, links.sle);
5041                 segs += AHC_NSEG;
5042                 physaddr += (AHC_NSEG * sizeof(struct ahc_dma_seg));
5043                 next_scb++;
5044                 ahc->scb_data->numscbs++;
5045         }
5046 }
5047
5048 void
5049 ahc_controller_info(struct ahc_softc *ahc, char *buf)
5050 {
5051         int len;
5052
5053         len = sprintf(buf, "%s: ", ahc_chip_names[ahc->chip & AHC_CHIPID_MASK]);
5054         buf += len;
5055         if ((ahc->features & AHC_TWIN) != 0)
5056                 len = sprintf(buf, "Twin Channel, A SCSI Id=%d, "
5057                               "B SCSI Id=%d, primary %c, ",
5058                               ahc->our_id, ahc->our_id_b,
5059                               (ahc->flags & AHC_PRIMARY_CHANNEL) + 'A');
5060         else {
5061                 const char *speed;
5062                 const char *type;
5063
5064                 speed = "";
5065                 if ((ahc->features & AHC_ULTRA) != 0) {
5066                         speed = "Ultra ";
5067                 } else if ((ahc->features & AHC_DT) != 0) {
5068                         speed = "Ultra160 ";
5069                 } else if ((ahc->features & AHC_ULTRA2) != 0) {
5070                         speed = "Ultra2 ";
5071                 }
5072                 if ((ahc->features & AHC_WIDE) != 0) {
5073                         type = "Wide";
5074                 } else {
5075                         type = "Single";
5076                 }
5077                 len = sprintf(buf, "%s%s Channel %c, SCSI Id=%d, ",
5078                               speed, type, ahc->channel, ahc->our_id);
5079         }
5080         buf += len;
5081
5082         if ((ahc->flags & AHC_PAGESCBS) != 0)
5083                 sprintf(buf, "%d/%d SCBs",
5084                         ahc->scb_data->maxhscbs, AHC_MAX_QUEUE);
5085         else
5086                 sprintf(buf, "%d SCBs", ahc->scb_data->maxhscbs);
5087 }
5088
5089 int
5090 ahc_chip_init(struct ahc_softc *ahc)
5091 {
5092         int      term;
5093         int      error;
5094         u_int    i;
5095         u_int    scsi_conf;
5096         u_int    scsiseq_template;
5097         uint32_t physaddr;
5098
5099         ahc_outb(ahc, SEQ_FLAGS, 0);
5100         ahc_outb(ahc, SEQ_FLAGS2, 0);
5101
5102         /* Set the SCSI Id, SXFRCTL0, SXFRCTL1, and SIMODE1, for both channels*/
5103         if (ahc->features & AHC_TWIN) {
5104
5105                 /*
5106                  * Setup Channel B first.
5107                  */
5108                 ahc_outb(ahc, SBLKCTL, ahc_inb(ahc, SBLKCTL) | SELBUSB);
5109                 term = (ahc->flags & AHC_TERM_ENB_B) != 0 ? STPWEN : 0;
5110                 ahc_outb(ahc, SCSIID, ahc->our_id_b);
5111                 scsi_conf = ahc_inb(ahc, SCSICONF + 1);
5112                 ahc_outb(ahc, SXFRCTL1, (scsi_conf & (ENSPCHK|STIMESEL))
5113                                         |term|ahc->seltime_b|ENSTIMER|ACTNEGEN);
5114                 if ((ahc->features & AHC_ULTRA2) != 0)
5115                         ahc_outb(ahc, SIMODE0, ahc_inb(ahc, SIMODE0)|ENIOERR);
5116                 ahc_outb(ahc, SIMODE1, ENSELTIMO|ENSCSIRST|ENSCSIPERR);
5117                 ahc_outb(ahc, SXFRCTL0, DFON|SPIOEN);
5118
5119                 /* Select Channel A */
5120                 ahc_outb(ahc, SBLKCTL, ahc_inb(ahc, SBLKCTL) & ~SELBUSB);
5121         }
5122         term = (ahc->flags & AHC_TERM_ENB_A) != 0 ? STPWEN : 0;
5123         if ((ahc->features & AHC_ULTRA2) != 0)
5124                 ahc_outb(ahc, SCSIID_ULTRA2, ahc->our_id);
5125         else
5126                 ahc_outb(ahc, SCSIID, ahc->our_id);
5127         scsi_conf = ahc_inb(ahc, SCSICONF);
5128         ahc_outb(ahc, SXFRCTL1, (scsi_conf & (ENSPCHK|STIMESEL))
5129                                 |term|ahc->seltime
5130                                 |ENSTIMER|ACTNEGEN);
5131         if ((ahc->features & AHC_ULTRA2) != 0)
5132                 ahc_outb(ahc, SIMODE0, ahc_inb(ahc, SIMODE0)|ENIOERR);
5133         ahc_outb(ahc, SIMODE1, ENSELTIMO|ENSCSIRST|ENSCSIPERR);
5134         ahc_outb(ahc, SXFRCTL0, DFON|SPIOEN);
5135
5136         /* There are no untagged SCBs active yet. */
5137         for (i = 0; i < 16; i++) {
5138                 ahc_unbusy_tcl(ahc, BUILD_TCL(i << 4, 0));
5139                 if ((ahc->flags & AHC_SCB_BTT) != 0) {
5140                         int lun;
5141
5142                         /*
5143                          * The SCB based BTT allows an entry per
5144                          * target and lun pair.
5145                          */
5146                         for (lun = 1; lun < AHC_NUM_LUNS; lun++)
5147                                 ahc_unbusy_tcl(ahc, BUILD_TCL(i << 4, lun));
5148                 }
5149         }
5150
5151         /* All of our queues are empty */
5152         for (i = 0; i < 256; i++)
5153                 ahc->qoutfifo[i] = SCB_LIST_NULL;
5154         ahc_sync_qoutfifo(ahc, BUS_DMASYNC_PREREAD);
5155
5156         for (i = 0; i < 256; i++)
5157                 ahc->qinfifo[i] = SCB_LIST_NULL;
5158
5159         if ((ahc->features & AHC_MULTI_TID) != 0) {
5160                 ahc_outb(ahc, TARGID, 0);
5161                 ahc_outb(ahc, TARGID + 1, 0);
5162         }
5163
5164         /*
5165          * Tell the sequencer where it can find our arrays in memory.
5166          */
5167         physaddr = ahc->scb_data->hscb_busaddr;
5168         ahc_outb(ahc, HSCB_ADDR, physaddr & 0xFF);
5169         ahc_outb(ahc, HSCB_ADDR + 1, (physaddr >> 8) & 0xFF);
5170         ahc_outb(ahc, HSCB_ADDR + 2, (physaddr >> 16) & 0xFF);
5171         ahc_outb(ahc, HSCB_ADDR + 3, (physaddr >> 24) & 0xFF);
5172
5173         physaddr = ahc->shared_data_busaddr;
5174         ahc_outb(ahc, SHARED_DATA_ADDR, physaddr & 0xFF);
5175         ahc_outb(ahc, SHARED_DATA_ADDR + 1, (physaddr >> 8) & 0xFF);
5176         ahc_outb(ahc, SHARED_DATA_ADDR + 2, (physaddr >> 16) & 0xFF);
5177         ahc_outb(ahc, SHARED_DATA_ADDR + 3, (physaddr >> 24) & 0xFF);
5178
5179         /*
5180          * Initialize the group code to command length table.
5181          * This overrides the values in TARG_SCSIRATE, so only
5182          * setup the table after we have processed that information.
5183          */
5184         ahc_outb(ahc, CMDSIZE_TABLE, 5);
5185         ahc_outb(ahc, CMDSIZE_TABLE + 1, 9);
5186         ahc_outb(ahc, CMDSIZE_TABLE + 2, 9);
5187         ahc_outb(ahc, CMDSIZE_TABLE + 3, 0);
5188         ahc_outb(ahc, CMDSIZE_TABLE + 4, 15);
5189         ahc_outb(ahc, CMDSIZE_TABLE + 5, 11);
5190         ahc_outb(ahc, CMDSIZE_TABLE + 6, 0);
5191         ahc_outb(ahc, CMDSIZE_TABLE + 7, 0);
5192
5193         if ((ahc->features & AHC_HS_MAILBOX) != 0)
5194                 ahc_outb(ahc, HS_MAILBOX, 0);
5195
5196         /* Tell the sequencer of our initial queue positions */
5197         if ((ahc->features & AHC_TARGETMODE) != 0) {
5198                 ahc->tqinfifonext = 1;
5199                 ahc_outb(ahc, KERNEL_TQINPOS, ahc->tqinfifonext - 1);
5200                 ahc_outb(ahc, TQINPOS, ahc->tqinfifonext);
5201         }
5202         ahc->qinfifonext = 0;
5203         ahc->qoutfifonext = 0;
5204         if ((ahc->features & AHC_QUEUE_REGS) != 0) {
5205                 ahc_outb(ahc, QOFF_CTLSTA, SCB_QSIZE_256);
5206                 ahc_outb(ahc, HNSCB_QOFF, ahc->qinfifonext);
5207                 ahc_outb(ahc, SNSCB_QOFF, ahc->qinfifonext);
5208                 ahc_outb(ahc, SDSCB_QOFF, 0);
5209         } else {
5210                 ahc_outb(ahc, KERNEL_QINPOS, ahc->qinfifonext);
5211                 ahc_outb(ahc, QINPOS, ahc->qinfifonext);
5212                 ahc_outb(ahc, QOUTPOS, ahc->qoutfifonext);
5213         }
5214
5215         /* We don't have any waiting selections */
5216         ahc_outb(ahc, WAITING_SCBH, SCB_LIST_NULL);
5217
5218         /* Our disconnection list is empty too */
5219         ahc_outb(ahc, DISCONNECTED_SCBH, SCB_LIST_NULL);
5220
5221         /* Message out buffer starts empty */
5222         ahc_outb(ahc, MSG_OUT, MSG_NOOP);
5223
5224         /*
5225          * Setup the allowed SCSI Sequences based on operational mode.
5226          * If we are a target, we'll enalbe select in operations once
5227          * we've had a lun enabled.
5228          */
5229         scsiseq_template = ENSELO|ENAUTOATNO|ENAUTOATNP;
5230         if ((ahc->flags & AHC_INITIATORROLE) != 0)
5231                 scsiseq_template |= ENRSELI;
5232         ahc_outb(ahc, SCSISEQ_TEMPLATE, scsiseq_template);
5233
5234         /* Initialize our list of free SCBs. */
5235         ahc_build_free_scb_list(ahc);
5236
5237         /*
5238          * Tell the sequencer which SCB will be the next one it receives.
5239          */
5240         ahc_outb(ahc, NEXT_QUEUED_SCB, ahc->next_queued_scb->hscb->tag);
5241
5242         /*
5243          * Load the Sequencer program and Enable the adapter
5244          * in "fast" mode.
5245          */
5246         if (bootverbose)
5247                 printf("%s: Downloading Sequencer Program...",
5248                        ahc_name(ahc));
5249
5250         error = ahc_loadseq(ahc);
5251         if (error != 0)
5252                 return (error);
5253
5254         if ((ahc->features & AHC_ULTRA2) != 0) {
5255                 int wait;
5256
5257                 /*
5258                  * Wait for up to 500ms for our transceivers
5259                  * to settle.  If the adapter does not have
5260                  * a cable attached, the transceivers may
5261                  * never settle, so don't complain if we
5262                  * fail here.
5263                  */
5264                 for (wait = 5000;
5265                      (ahc_inb(ahc, SBLKCTL) & (ENAB40|ENAB20)) == 0 && wait;
5266                      wait--)
5267                         ahc_delay(100);
5268         }
5269         ahc_restart(ahc);
5270         return (0);
5271 }
5272
5273 /*
5274  * Start the board, ready for normal operation
5275  */
5276 int
5277 ahc_init(struct ahc_softc *ahc)
5278 {
5279         int      max_targ;
5280         u_int    i;
5281         u_int    scsi_conf;
5282         u_int    ultraenb;
5283         u_int    discenable;
5284         u_int    tagenable;
5285         size_t   driver_data_size;
5286
5287 #ifdef AHC_DEBUG
5288         if ((ahc_debug & AHC_DEBUG_SEQUENCER) != 0)
5289                 ahc->flags |= AHC_SEQUENCER_DEBUG;
5290 #endif
5291
5292 #ifdef AHC_PRINT_SRAM
5293         printf("Scratch Ram:");
5294         for (i = 0x20; i < 0x5f; i++) {
5295                 if (((i % 8) == 0) && (i != 0)) {
5296                         printf ("\n              ");
5297                 }
5298                 printf (" 0x%x", ahc_inb(ahc, i));
5299         }
5300         if ((ahc->features & AHC_MORE_SRAM) != 0) {
5301                 for (i = 0x70; i < 0x7f; i++) {
5302                         if (((i % 8) == 0) && (i != 0)) {
5303                                 printf ("\n              ");
5304                         }
5305                         printf (" 0x%x", ahc_inb(ahc, i));
5306                 }
5307         }
5308         printf ("\n");
5309         /*
5310          * Reading uninitialized scratch ram may
5311          * generate parity errors.
5312          */
5313         ahc_outb(ahc, CLRINT, CLRPARERR);
5314         ahc_outb(ahc, CLRINT, CLRBRKADRINT);
5315 #endif
5316         max_targ = 15;
5317
5318         /*
5319          * Assume we have a board at this stage and it has been reset.
5320          */
5321         if ((ahc->flags & AHC_USEDEFAULTS) != 0)
5322                 ahc->our_id = ahc->our_id_b = 7;
5323
5324         /*
5325          * Default to allowing initiator operations.
5326          */
5327         ahc->flags |= AHC_INITIATORROLE;
5328
5329         /*
5330          * Only allow target mode features if this unit has them enabled.
5331          */
5332         if ((AHC_TMODE_ENABLE & (0x1 << ahc->unit)) == 0)
5333                 ahc->features &= ~AHC_TARGETMODE;
5334
5335 #ifndef __linux__
5336         /* DMA tag for mapping buffers into device visible space. */
5337         if (ahc_dma_tag_create(ahc, ahc->parent_dmat, /*alignment*/1,
5338                                /*boundary*/BUS_SPACE_MAXADDR_32BIT + 1,
5339                                /*lowaddr*/ahc->flags & AHC_39BIT_ADDRESSING
5340                                         ? (dma_addr_t)0x7FFFFFFFFFULL
5341                                         : BUS_SPACE_MAXADDR_32BIT,
5342                                /*highaddr*/BUS_SPACE_MAXADDR,
5343                                /*filter*/NULL, /*filterarg*/NULL,
5344                                /*maxsize*/(AHC_NSEG - 1) * PAGE_SIZE,
5345                                /*nsegments*/AHC_NSEG,
5346                                /*maxsegsz*/AHC_MAXTRANSFER_SIZE,
5347                                /*flags*/BUS_DMA_ALLOCNOW,
5348                                &ahc->buffer_dmat) != 0) {
5349                 return (ENOMEM);
5350         }
5351 #endif
5352
5353         ahc->init_level++;
5354
5355         /*
5356          * DMA tag for our command fifos and other data in system memory
5357          * the card's sequencer must be able to access.  For initiator
5358          * roles, we need to allocate space for the qinfifo and qoutfifo.
5359          * The qinfifo and qoutfifo are composed of 256 1 byte elements.
5360          * When providing for the target mode role, we must additionally
5361          * provide space for the incoming target command fifo and an extra
5362          * byte to deal with a dma bug in some chip versions.
5363          */
5364         driver_data_size = 2 * 256 * sizeof(uint8_t);
5365         if ((ahc->features & AHC_TARGETMODE) != 0)
5366                 driver_data_size += AHC_TMODE_CMDS * sizeof(struct target_cmd)
5367                                  + /*DMA WideOdd Bug Buffer*/1;
5368         if (ahc_dma_tag_create(ahc, ahc->parent_dmat, /*alignment*/1,
5369                                /*boundary*/BUS_SPACE_MAXADDR_32BIT + 1,
5370                                /*lowaddr*/BUS_SPACE_MAXADDR_32BIT,
5371                                /*highaddr*/BUS_SPACE_MAXADDR,
5372                                /*filter*/NULL, /*filterarg*/NULL,
5373                                driver_data_size,
5374                                /*nsegments*/1,
5375                                /*maxsegsz*/BUS_SPACE_MAXSIZE_32BIT,
5376                                /*flags*/0, &ahc->shared_data_dmat) != 0) {
5377                 return (ENOMEM);
5378         }
5379
5380         ahc->init_level++;
5381
5382         /* Allocation of driver data */
5383         if (ahc_dmamem_alloc(ahc, ahc->shared_data_dmat,
5384                              (void **)&ahc->qoutfifo,
5385                              BUS_DMA_NOWAIT, &ahc->shared_data_dmamap) != 0) {
5386                 return (ENOMEM);
5387         }
5388
5389         ahc->init_level++;
5390
5391         /* And permanently map it in */
5392         ahc_dmamap_load(ahc, ahc->shared_data_dmat, ahc->shared_data_dmamap,
5393                         ahc->qoutfifo, driver_data_size, ahc_dmamap_cb,
5394                         &ahc->shared_data_busaddr, /*flags*/0);
5395
5396         if ((ahc->features & AHC_TARGETMODE) != 0) {
5397                 ahc->targetcmds = (struct target_cmd *)ahc->qoutfifo;
5398                 ahc->qoutfifo = (uint8_t *)&ahc->targetcmds[AHC_TMODE_CMDS];
5399                 ahc->dma_bug_buf = ahc->shared_data_busaddr
5400                                  + driver_data_size - 1;
5401                 /* All target command blocks start out invalid. */
5402                 for (i = 0; i < AHC_TMODE_CMDS; i++)
5403                         ahc->targetcmds[i].cmd_valid = 0;
5404                 ahc_sync_tqinfifo(ahc, BUS_DMASYNC_PREREAD);
5405                 ahc->qoutfifo = (uint8_t *)&ahc->targetcmds[256];
5406         }
5407         ahc->qinfifo = &ahc->qoutfifo[256];
5408
5409         ahc->init_level++;
5410
5411         /* Allocate SCB data now that buffer_dmat is initialized */
5412         if (ahc->scb_data->maxhscbs == 0)
5413                 if (ahc_init_scbdata(ahc) != 0)
5414                         return (ENOMEM);
5415
5416         /*
5417          * Allocate a tstate to house information for our
5418          * initiator presence on the bus as well as the user
5419          * data for any target mode initiator.
5420          */
5421         if (ahc_alloc_tstate(ahc, ahc->our_id, 'A') == NULL) {
5422                 printf("%s: unable to allocate ahc_tmode_tstate.  "
5423                        "Failing attach\n", ahc_name(ahc));
5424                 return (ENOMEM);
5425         }
5426
5427         if ((ahc->features & AHC_TWIN) != 0) {
5428                 if (ahc_alloc_tstate(ahc, ahc->our_id_b, 'B') == NULL) {
5429                         printf("%s: unable to allocate ahc_tmode_tstate.  "
5430                                "Failing attach\n", ahc_name(ahc));
5431                         return (ENOMEM);
5432                 }
5433         }
5434
5435         if (ahc->scb_data->maxhscbs < AHC_SCB_MAX_ALLOC) {
5436                 ahc->flags |= AHC_PAGESCBS;
5437         } else {
5438                 ahc->flags &= ~AHC_PAGESCBS;
5439         }
5440
5441 #ifdef AHC_DEBUG
5442         if (ahc_debug & AHC_SHOW_MISC) {
5443                 printf("%s: hardware scb %u bytes; kernel scb %u bytes; "
5444                        "ahc_dma %u bytes\n",
5445                         ahc_name(ahc),
5446                         (u_int)sizeof(struct hardware_scb),
5447                         (u_int)sizeof(struct scb),
5448                         (u_int)sizeof(struct ahc_dma_seg));
5449         }
5450 #endif /* AHC_DEBUG */
5451
5452         /*
5453          * Look at the information that board initialization or
5454          * the board bios has left us.
5455          */
5456         if (ahc->features & AHC_TWIN) {
5457                 scsi_conf = ahc_inb(ahc, SCSICONF + 1);
5458                 if ((scsi_conf & RESET_SCSI) != 0
5459                  && (ahc->flags & AHC_INITIATORROLE) != 0)
5460                         ahc->flags |= AHC_RESET_BUS_B;
5461         }
5462
5463         scsi_conf = ahc_inb(ahc, SCSICONF);
5464         if ((scsi_conf & RESET_SCSI) != 0
5465          && (ahc->flags & AHC_INITIATORROLE) != 0)
5466                 ahc->flags |= AHC_RESET_BUS_A;
5467
5468         ultraenb = 0;
5469         tagenable = ALL_TARGETS_MASK;
5470
5471         /* Grab the disconnection disable table and invert it for our needs */
5472         if ((ahc->flags & AHC_USEDEFAULTS) != 0) {
5473                 printf("%s: Host Adapter Bios disabled.  Using default SCSI "
5474                         "device parameters\n", ahc_name(ahc));
5475                 ahc->flags |= AHC_EXTENDED_TRANS_A|AHC_EXTENDED_TRANS_B|
5476                               AHC_TERM_ENB_A|AHC_TERM_ENB_B;
5477                 discenable = ALL_TARGETS_MASK;
5478                 if ((ahc->features & AHC_ULTRA) != 0)
5479                         ultraenb = ALL_TARGETS_MASK;
5480         } else {
5481                 discenable = ~((ahc_inb(ahc, DISC_DSB + 1) << 8)
5482                            | ahc_inb(ahc, DISC_DSB));
5483                 if ((ahc->features & (AHC_ULTRA|AHC_ULTRA2)) != 0)
5484                         ultraenb = (ahc_inb(ahc, ULTRA_ENB + 1) << 8)
5485                                       | ahc_inb(ahc, ULTRA_ENB);
5486         }
5487
5488         if ((ahc->features & (AHC_WIDE|AHC_TWIN)) == 0)
5489                 max_targ = 7;
5490
5491         for (i = 0; i <= max_targ; i++) {
5492                 struct ahc_initiator_tinfo *tinfo;
5493                 struct ahc_tmode_tstate *tstate;
5494                 u_int our_id;
5495                 u_int target_id;
5496                 char channel;
5497
5498                 channel = 'A';
5499                 our_id = ahc->our_id;
5500                 target_id = i;
5501                 if (i > 7 && (ahc->features & AHC_TWIN) != 0) {
5502                         channel = 'B';
5503                         our_id = ahc->our_id_b;
5504                         target_id = i % 8;
5505                 }
5506                 tinfo = ahc_fetch_transinfo(ahc, channel, our_id,
5507                                             target_id, &tstate);
5508                 /* Default to async narrow across the board */
5509                 memset(tinfo, 0, sizeof(*tinfo));
5510                 if (ahc->flags & AHC_USEDEFAULTS) {
5511                         if ((ahc->features & AHC_WIDE) != 0)
5512                                 tinfo->user.width = MSG_EXT_WDTR_BUS_16_BIT;
5513
5514                         /*
5515                          * These will be truncated when we determine the
5516                          * connection type we have with the target.
5517                          */
5518                         tinfo->user.period = ahc_syncrates->period;
5519                         tinfo->user.offset = MAX_OFFSET;
5520                 } else {
5521                         u_int scsirate;
5522                         uint16_t mask;
5523
5524                         /* Take the settings leftover in scratch RAM. */
5525                         scsirate = ahc_inb(ahc, TARG_SCSIRATE + i);
5526                         mask = (0x01 << i);
5527                         if ((ahc->features & AHC_ULTRA2) != 0) {
5528                                 u_int offset;
5529                                 u_int maxsync;
5530
5531                                 if ((scsirate & SOFS) == 0x0F) {
5532                                         /*
5533                                          * Haven't negotiated yet,
5534                                          * so the format is different.
5535                                          */
5536                                         scsirate = (scsirate & SXFR) >> 4
5537                                                  | (ultraenb & mask)
5538                                                   ? 0x08 : 0x0
5539                                                  | (scsirate & WIDEXFER);
5540                                         offset = MAX_OFFSET_ULTRA2;
5541                                 } else
5542                                         offset = ahc_inb(ahc, TARG_OFFSET + i);
5543                                 if ((scsirate & ~WIDEXFER) == 0 && offset != 0)
5544                                         /* Set to the lowest sync rate, 5MHz */
5545                                         scsirate |= 0x1c;
5546                                 maxsync = AHC_SYNCRATE_ULTRA2;
5547                                 if ((ahc->features & AHC_DT) != 0)
5548                                         maxsync = AHC_SYNCRATE_DT;
5549                                 tinfo->user.period =
5550                                     ahc_find_period(ahc, scsirate, maxsync);
5551                                 if (offset == 0)
5552                                         tinfo->user.period = 0;
5553                                 else
5554                                         tinfo->user.offset = MAX_OFFSET;
5555                                 if ((scsirate & SXFR_ULTRA2) <= 8/*10MHz*/
5556                                  && (ahc->features & AHC_DT) != 0)
5557                                         tinfo->user.ppr_options =
5558                                             MSG_EXT_PPR_DT_REQ;
5559                         } else if ((scsirate & SOFS) != 0) {
5560                                 if ((scsirate & SXFR) == 0x40
5561                                  && (ultraenb & mask) != 0) {
5562                                         /* Treat 10MHz as a non-ultra speed */
5563                                         scsirate &= ~SXFR;
5564                                         ultraenb &= ~mask;
5565                                 }
5566                                 tinfo->user.period =
5567                                     ahc_find_period(ahc, scsirate,
5568                                                     (ultraenb & mask)
5569                                                    ? AHC_SYNCRATE_ULTRA
5570                                                    : AHC_SYNCRATE_FAST);
5571                                 if (tinfo->user.period != 0)
5572                                         tinfo->user.offset = MAX_OFFSET;
5573                         }
5574                         if (tinfo->user.period == 0)
5575                                 tinfo->user.offset = 0;
5576                         if ((scsirate & WIDEXFER) != 0
5577                          && (ahc->features & AHC_WIDE) != 0)
5578                                 tinfo->user.width = MSG_EXT_WDTR_BUS_16_BIT;
5579                         tinfo->user.protocol_version = 4;
5580                         if ((ahc->features & AHC_DT) != 0)
5581                                 tinfo->user.transport_version = 3;
5582                         else
5583                                 tinfo->user.transport_version = 2;
5584                         tinfo->goal.protocol_version = 2;
5585                         tinfo->goal.transport_version = 2;
5586                         tinfo->curr.protocol_version = 2;
5587                         tinfo->curr.transport_version = 2;
5588                 }
5589                 tstate->ultraenb = 0;
5590         }
5591         ahc->user_discenable = discenable;
5592         ahc->user_tagenable = tagenable;
5593
5594         return (ahc->bus_chip_init(ahc));
5595 }
5596
5597 void
5598 ahc_intr_enable(struct ahc_softc *ahc, int enable)
5599 {
5600         u_int hcntrl;
5601
5602         hcntrl = ahc_inb(ahc, HCNTRL);
5603         hcntrl &= ~INTEN;
5604         ahc->pause &= ~INTEN;
5605         ahc->unpause &= ~INTEN;
5606         if (enable) {
5607                 hcntrl |= INTEN;
5608                 ahc->pause |= INTEN;
5609                 ahc->unpause |= INTEN;
5610         }
5611         ahc_outb(ahc, HCNTRL, hcntrl);
5612 }
5613
5614 /*
5615  * Ensure that the card is paused in a location
5616  * outside of all critical sections and that all
5617  * pending work is completed prior to returning.
5618  * This routine should only be called from outside
5619  * an interrupt context.
5620  */
5621 void
5622 ahc_pause_and_flushwork(struct ahc_softc *ahc)
5623 {
5624         int intstat;
5625         int maxloops;
5626         int paused;
5627
5628         maxloops = 1000;
5629         ahc->flags |= AHC_ALL_INTERRUPTS;
5630         paused = FALSE;
5631         do {
5632                 if (paused) {
5633                         ahc_unpause(ahc);
5634                         /*
5635                          * Give the sequencer some time to service
5636                          * any active selections.
5637                          */
5638                         ahc_delay(500);
5639                 }
5640                 ahc_intr(ahc);
5641                 ahc_pause(ahc);
5642                 paused = TRUE;
5643                 ahc_outb(ahc, SCSISEQ, ahc_inb(ahc, SCSISEQ) & ~ENSELO);
5644                 intstat = ahc_inb(ahc, INTSTAT);
5645                 if ((intstat & INT_PEND) == 0) {
5646                         ahc_clear_critical_section(ahc);
5647                         intstat = ahc_inb(ahc, INTSTAT);
5648                 }
5649         } while (--maxloops
5650               && (intstat != 0xFF || (ahc->features & AHC_REMOVABLE) == 0)
5651               && ((intstat & INT_PEND) != 0
5652                || (ahc_inb(ahc, SSTAT0) & (SELDO|SELINGO)) != 0));
5653         if (maxloops == 0) {
5654                 printf("Infinite interrupt loop, INTSTAT = %x",
5655                        ahc_inb(ahc, INTSTAT));
5656         }
5657         ahc_platform_flushwork(ahc);
5658         ahc->flags &= ~AHC_ALL_INTERRUPTS;
5659 }
5660
5661 #ifdef CONFIG_PM
5662 int
5663 ahc_suspend(struct ahc_softc *ahc)
5664 {
5665
5666         ahc_pause_and_flushwork(ahc);
5667
5668         if (LIST_FIRST(&ahc->pending_scbs) != NULL) {
5669                 ahc_unpause(ahc);
5670                 return (EBUSY);
5671         }
5672
5673 #ifdef AHC_TARGET_MODE
5674         /*
5675          * XXX What about ATIOs that have not yet been serviced?
5676          * Perhaps we should just refuse to be suspended if we
5677          * are acting in a target role.
5678          */
5679         if (ahc->pending_device != NULL) {
5680                 ahc_unpause(ahc);
5681                 return (EBUSY);
5682         }
5683 #endif
5684         ahc_shutdown(ahc);
5685         return (0);
5686 }
5687
5688 int
5689 ahc_resume(struct ahc_softc *ahc)
5690 {
5691
5692         ahc_reset(ahc, /*reinit*/TRUE);
5693         ahc_intr_enable(ahc, TRUE);
5694         ahc_restart(ahc);
5695         return (0);
5696 }
5697 #endif
5698 /************************** Busy Target Table *********************************/
5699 /*
5700  * Return the untagged transaction id for a given target/channel lun.
5701  * Optionally, clear the entry.
5702  */
5703 static u_int
5704 ahc_index_busy_tcl(struct ahc_softc *ahc, u_int tcl)
5705 {
5706         u_int scbid;
5707         u_int target_offset;
5708
5709         if ((ahc->flags & AHC_SCB_BTT) != 0) {
5710                 u_int saved_scbptr;
5711
5712                 saved_scbptr = ahc_inb(ahc, SCBPTR);
5713                 ahc_outb(ahc, SCBPTR, TCL_LUN(tcl));
5714                 scbid = ahc_inb(ahc, SCB_64_BTT + TCL_TARGET_OFFSET(tcl));
5715                 ahc_outb(ahc, SCBPTR, saved_scbptr);
5716         } else {
5717                 target_offset = TCL_TARGET_OFFSET(tcl);
5718                 scbid = ahc_inb(ahc, BUSY_TARGETS + target_offset);
5719         }
5720
5721         return (scbid);
5722 }
5723
5724 static void
5725 ahc_unbusy_tcl(struct ahc_softc *ahc, u_int tcl)
5726 {
5727         u_int target_offset;
5728
5729         if ((ahc->flags & AHC_SCB_BTT) != 0) {
5730                 u_int saved_scbptr;
5731
5732                 saved_scbptr = ahc_inb(ahc, SCBPTR);
5733                 ahc_outb(ahc, SCBPTR, TCL_LUN(tcl));
5734                 ahc_outb(ahc, SCB_64_BTT+TCL_TARGET_OFFSET(tcl), SCB_LIST_NULL);
5735                 ahc_outb(ahc, SCBPTR, saved_scbptr);
5736         } else {
5737                 target_offset = TCL_TARGET_OFFSET(tcl);
5738                 ahc_outb(ahc, BUSY_TARGETS + target_offset, SCB_LIST_NULL);
5739         }
5740 }
5741
5742 static void
5743 ahc_busy_tcl(struct ahc_softc *ahc, u_int tcl, u_int scbid)
5744 {
5745         u_int target_offset;
5746
5747         if ((ahc->flags & AHC_SCB_BTT) != 0) {
5748                 u_int saved_scbptr;
5749
5750                 saved_scbptr = ahc_inb(ahc, SCBPTR);
5751                 ahc_outb(ahc, SCBPTR, TCL_LUN(tcl));
5752                 ahc_outb(ahc, SCB_64_BTT + TCL_TARGET_OFFSET(tcl), scbid);
5753                 ahc_outb(ahc, SCBPTR, saved_scbptr);
5754         } else {
5755                 target_offset = TCL_TARGET_OFFSET(tcl);
5756                 ahc_outb(ahc, BUSY_TARGETS + target_offset, scbid);
5757         }
5758 }
5759
5760 /************************** SCB and SCB queue management **********************/
5761 int
5762 ahc_match_scb(struct ahc_softc *ahc, struct scb *scb, int target,
5763               char channel, int lun, u_int tag, role_t role)
5764 {
5765         int targ = SCB_GET_TARGET(ahc, scb);
5766         char chan = SCB_GET_CHANNEL(ahc, scb);
5767         int slun = SCB_GET_LUN(scb);
5768         int match;
5769
5770         match = ((chan == channel) || (channel == ALL_CHANNELS));
5771         if (match != 0)
5772                 match = ((targ == target) || (target == CAM_TARGET_WILDCARD));
5773         if (match != 0)
5774                 match = ((lun == slun) || (lun == CAM_LUN_WILDCARD));
5775         if (match != 0) {
5776 #ifdef AHC_TARGET_MODE
5777                 int group;
5778
5779                 group = XPT_FC_GROUP(scb->io_ctx->ccb_h.func_code);
5780                 if (role == ROLE_INITIATOR) {
5781                         match = (group != XPT_FC_GROUP_TMODE)
5782                               && ((tag == scb->hscb->tag)
5783                                || (tag == SCB_LIST_NULL));
5784                 } else if (role == ROLE_TARGET) {
5785                         match = (group == XPT_FC_GROUP_TMODE)
5786                               && ((tag == scb->io_ctx->csio.tag_id)
5787                                || (tag == SCB_LIST_NULL));
5788                 }
5789 #else /* !AHC_TARGET_MODE */
5790                 match = ((tag == scb->hscb->tag) || (tag == SCB_LIST_NULL));
5791 #endif /* AHC_TARGET_MODE */
5792         }
5793
5794         return match;
5795 }
5796
5797 static void
5798 ahc_freeze_devq(struct ahc_softc *ahc, struct scb *scb)
5799 {
5800         int     target;
5801         char    channel;
5802         int     lun;
5803
5804         target = SCB_GET_TARGET(ahc, scb);
5805         lun = SCB_GET_LUN(scb);
5806         channel = SCB_GET_CHANNEL(ahc, scb);
5807
5808         ahc_search_qinfifo(ahc, target, channel, lun,
5809                            /*tag*/SCB_LIST_NULL, ROLE_UNKNOWN,
5810                            CAM_REQUEUE_REQ, SEARCH_COMPLETE);
5811
5812         ahc_platform_freeze_devq(ahc, scb);
5813 }
5814
5815 void
5816 ahc_qinfifo_requeue_tail(struct ahc_softc *ahc, struct scb *scb)
5817 {
5818         struct scb *prev_scb;
5819
5820         prev_scb = NULL;
5821         if (ahc_qinfifo_count(ahc) != 0) {
5822                 u_int prev_tag;
5823                 uint8_t prev_pos;
5824
5825                 prev_pos = ahc->qinfifonext - 1;
5826                 prev_tag = ahc->qinfifo[prev_pos];
5827                 prev_scb = ahc_lookup_scb(ahc, prev_tag);
5828         }
5829         ahc_qinfifo_requeue(ahc, prev_scb, scb);
5830         if ((ahc->features & AHC_QUEUE_REGS) != 0) {
5831                 ahc_outb(ahc, HNSCB_QOFF, ahc->qinfifonext);
5832         } else {
5833                 ahc_outb(ahc, KERNEL_QINPOS, ahc->qinfifonext);
5834         }
5835 }
5836
5837 static void
5838 ahc_qinfifo_requeue(struct ahc_softc *ahc, struct scb *prev_scb,
5839                     struct scb *scb)
5840 {
5841         if (prev_scb == NULL) {
5842                 ahc_outb(ahc, NEXT_QUEUED_SCB, scb->hscb->tag);
5843         } else {
5844                 prev_scb->hscb->next = scb->hscb->tag;
5845                 ahc_sync_scb(ahc, prev_scb,
5846                              BUS_DMASYNC_PREREAD|BUS_DMASYNC_PREWRITE);
5847         }
5848         ahc->qinfifo[ahc->qinfifonext++] = scb->hscb->tag;
5849         scb->hscb->next = ahc->next_queued_scb->hscb->tag;
5850         ahc_sync_scb(ahc, scb, BUS_DMASYNC_PREREAD|BUS_DMASYNC_PREWRITE);
5851 }
5852
5853 static int
5854 ahc_qinfifo_count(struct ahc_softc *ahc)
5855 {
5856         uint8_t qinpos;
5857         uint8_t diff;
5858
5859         if ((ahc->features & AHC_QUEUE_REGS) != 0) {
5860                 qinpos = ahc_inb(ahc, SNSCB_QOFF);
5861                 ahc_outb(ahc, SNSCB_QOFF, qinpos);
5862         } else
5863                 qinpos = ahc_inb(ahc, QINPOS);
5864         diff = ahc->qinfifonext - qinpos;
5865         return (diff);
5866 }
5867
5868 int
5869 ahc_search_qinfifo(struct ahc_softc *ahc, int target, char channel,
5870                    int lun, u_int tag, role_t role, uint32_t status,
5871                    ahc_search_action action)
5872 {
5873         struct  scb *scb;
5874         struct  scb *prev_scb;
5875         uint8_t qinstart;
5876         uint8_t qinpos;
5877         uint8_t qintail;
5878         uint8_t next;
5879         uint8_t prev;
5880         uint8_t curscbptr;
5881         int     found;
5882         int     have_qregs;
5883
5884         qintail = ahc->qinfifonext;
5885         have_qregs = (ahc->features & AHC_QUEUE_REGS) != 0;
5886         if (have_qregs) {
5887                 qinstart = ahc_inb(ahc, SNSCB_QOFF);
5888                 ahc_outb(ahc, SNSCB_QOFF, qinstart);
5889         } else
5890                 qinstart = ahc_inb(ahc, QINPOS);
5891         qinpos = qinstart;
5892         found = 0;
5893         prev_scb = NULL;
5894
5895         if (action == SEARCH_COMPLETE) {
5896                 /*
5897                  * Don't attempt to run any queued untagged transactions
5898                  * until we are done with the abort process.
5899                  */
5900                 ahc_freeze_untagged_queues(ahc);
5901         }
5902
5903         /*
5904          * Start with an empty queue.  Entries that are not chosen
5905          * for removal will be re-added to the queue as we go.
5906          */
5907         ahc->qinfifonext = qinpos;
5908         ahc_outb(ahc, NEXT_QUEUED_SCB, ahc->next_queued_scb->hscb->tag);
5909
5910         while (qinpos != qintail) {
5911                 scb = ahc_lookup_scb(ahc, ahc->qinfifo[qinpos]);
5912                 if (scb == NULL) {
5913                         printf("qinpos = %d, SCB index = %d\n",
5914                                 qinpos, ahc->qinfifo[qinpos]);
5915                         panic("Loop 1\n");
5916                 }
5917
5918                 if (ahc_match_scb(ahc, scb, target, channel, lun, tag, role)) {
5919                         /*
5920                          * We found an scb that needs to be acted on.
5921                          */
5922                         found++;
5923                         switch (action) {
5924                         case SEARCH_COMPLETE:
5925                         {
5926                                 cam_status ostat;
5927                                 cam_status cstat;
5928
5929                                 ostat = ahc_get_transaction_status(scb);
5930                                 if (ostat == CAM_REQ_INPROG)
5931                                         ahc_set_transaction_status(scb, status);
5932                                 cstat = ahc_get_transaction_status(scb);
5933                                 if (cstat != CAM_REQ_CMP)
5934                                         ahc_freeze_scb(scb);
5935                                 if ((scb->flags & SCB_ACTIVE) == 0)
5936                                         printf("Inactive SCB in qinfifo\n");
5937                                 ahc_done(ahc, scb);
5938
5939                                 /* FALLTHROUGH */
5940                         }
5941                         case SEARCH_REMOVE:
5942                                 break;
5943                         case SEARCH_COUNT:
5944                                 ahc_qinfifo_requeue(ahc, prev_scb, scb);
5945                                 prev_scb = scb;
5946                                 break;
5947                         }
5948                 } else {
5949                         ahc_qinfifo_requeue(ahc, prev_scb, scb);
5950                         prev_scb = scb;
5951                 }
5952                 qinpos++;
5953         }
5954
5955         if ((ahc->features & AHC_QUEUE_REGS) != 0) {
5956                 ahc_outb(ahc, HNSCB_QOFF, ahc->qinfifonext);
5957         } else {
5958                 ahc_outb(ahc, KERNEL_QINPOS, ahc->qinfifonext);
5959         }
5960
5961         if (action != SEARCH_COUNT
5962          && (found != 0)
5963          && (qinstart != ahc->qinfifonext)) {
5964                 /*
5965                  * The sequencer may be in the process of dmaing
5966                  * down the SCB at the beginning of the queue.
5967                  * This could be problematic if either the first,
5968                  * or the second SCB is removed from the queue
5969                  * (the first SCB includes a pointer to the "next"
5970                  * SCB to dma). If we have removed any entries, swap
5971                  * the first element in the queue with the next HSCB
5972                  * so the sequencer will notice that NEXT_QUEUED_SCB
5973                  * has changed during its dma attempt and will retry
5974                  * the DMA.
5975                  */
5976                 scb = ahc_lookup_scb(ahc, ahc->qinfifo[qinstart]);
5977
5978                 if (scb == NULL) {
5979                         printf("found = %d, qinstart = %d, qinfifionext = %d\n",
5980                                 found, qinstart, ahc->qinfifonext);
5981                         panic("First/Second Qinfifo fixup\n");
5982                 }
5983                 /*
5984                  * ahc_swap_with_next_hscb forces our next pointer to
5985                  * point to the reserved SCB for future commands.  Save
5986                  * and restore our original next pointer to maintain
5987                  * queue integrity.
5988                  */
5989                 next = scb->hscb->next;
5990                 ahc->scb_data->scbindex[scb->hscb->tag] = NULL;
5991                 ahc_swap_with_next_hscb(ahc, scb);
5992                 scb->hscb->next = next;
5993                 ahc->qinfifo[qinstart] = scb->hscb->tag;
5994
5995                 /* Tell the card about the new head of the qinfifo. */
5996                 ahc_outb(ahc, NEXT_QUEUED_SCB, scb->hscb->tag);
5997
5998                 /* Fixup the tail "next" pointer. */
5999                 qintail = ahc->qinfifonext - 1;
6000                 scb = ahc_lookup_scb(ahc, ahc->qinfifo[qintail]);
6001                 scb->hscb->next = ahc->next_queued_scb->hscb->tag;
6002         }
6003
6004         /*
6005          * Search waiting for selection list.
6006          */
6007         curscbptr = ahc_inb(ahc, SCBPTR);
6008         next = ahc_inb(ahc, WAITING_SCBH);  /* Start at head of list. */
6009         prev = SCB_LIST_NULL;
6010
6011         while (next != SCB_LIST_NULL) {
6012                 uint8_t scb_index;
6013
6014                 ahc_outb(ahc, SCBPTR, next);
6015                 scb_index = ahc_inb(ahc, SCB_TAG);
6016                 if (scb_index >= ahc->scb_data->numscbs) {
6017                         printf("Waiting List inconsistency. "
6018                                "SCB index == %d, yet numscbs == %d.",
6019                                scb_index, ahc->scb_data->numscbs);
6020                         ahc_dump_card_state(ahc);
6021                         panic("for safety");
6022                 }
6023                 scb = ahc_lookup_scb(ahc, scb_index);
6024                 if (scb == NULL) {
6025                         printf("scb_index = %d, next = %d\n",
6026                                 scb_index, next);
6027                         panic("Waiting List traversal\n");
6028                 }
6029                 if (ahc_match_scb(ahc, scb, target, channel,
6030                                   lun, SCB_LIST_NULL, role)) {
6031                         /*
6032                          * We found an scb that needs to be acted on.
6033                          */
6034                         found++;
6035                         switch (action) {
6036                         case SEARCH_COMPLETE:
6037                         {
6038                                 cam_status ostat;
6039                                 cam_status cstat;
6040
6041                                 ostat = ahc_get_transaction_status(scb);
6042                                 if (ostat == CAM_REQ_INPROG)
6043                                         ahc_set_transaction_status(scb,
6044                                                                    status);
6045                                 cstat = ahc_get_transaction_status(scb);
6046                                 if (cstat != CAM_REQ_CMP)
6047                                         ahc_freeze_scb(scb);
6048                                 if ((scb->flags & SCB_ACTIVE) == 0)
6049                                         printf("Inactive SCB in Waiting List\n");
6050                                 ahc_done(ahc, scb);
6051                                 /* FALLTHROUGH */
6052                         }
6053                         case SEARCH_REMOVE:
6054                                 next = ahc_rem_wscb(ahc, next, prev);
6055                                 break;
6056                         case SEARCH_COUNT:
6057                                 prev = next;
6058                                 next = ahc_inb(ahc, SCB_NEXT);
6059                                 break;
6060                         }
6061                 } else {
6062
6063                         prev = next;
6064                         next = ahc_inb(ahc, SCB_NEXT);
6065                 }
6066         }
6067         ahc_outb(ahc, SCBPTR, curscbptr);
6068
6069         found += ahc_search_untagged_queues(ahc, /*ahc_io_ctx_t*/NULL, target,
6070                                             channel, lun, status, action);
6071
6072         if (action == SEARCH_COMPLETE)
6073                 ahc_release_untagged_queues(ahc);
6074         return (found);
6075 }
6076
6077 int
6078 ahc_search_untagged_queues(struct ahc_softc *ahc, ahc_io_ctx_t ctx,
6079                            int target, char channel, int lun, uint32_t status,
6080                            ahc_search_action action)
6081 {
6082         struct  scb *scb;
6083         int     maxtarget;
6084         int     found;
6085         int     i;
6086
6087         if (action == SEARCH_COMPLETE) {
6088                 /*
6089                  * Don't attempt to run any queued untagged transactions
6090                  * until we are done with the abort process.
6091                  */
6092                 ahc_freeze_untagged_queues(ahc);
6093         }
6094
6095         found = 0;
6096         i = 0;
6097         if ((ahc->flags & AHC_SCB_BTT) == 0) {
6098
6099                 maxtarget = 16;
6100                 if (target != CAM_TARGET_WILDCARD) {
6101
6102                         i = target;
6103                         if (channel == 'B')
6104                                 i += 8;
6105                         maxtarget = i + 1;
6106                 }
6107         } else {
6108                 maxtarget = 0;
6109         }
6110
6111         for (; i < maxtarget; i++) {
6112                 struct scb_tailq *untagged_q;
6113                 struct scb *next_scb;
6114
6115                 untagged_q = &(ahc->untagged_queues[i]);
6116                 next_scb = TAILQ_FIRST(untagged_q);
6117                 while (next_scb != NULL) {
6118
6119                         scb = next_scb;
6120                         next_scb = TAILQ_NEXT(scb, links.tqe);
6121
6122                         /*
6123                          * The head of the list may be the currently
6124                          * active untagged command for a device.
6125                          * We're only searching for commands that
6126                          * have not been started.  A transaction
6127                          * marked active but still in the qinfifo
6128                          * is removed by the qinfifo scanning code
6129                          * above.
6130                          */
6131                         if ((scb->flags & SCB_ACTIVE) != 0)
6132                                 continue;
6133
6134                         if (ahc_match_scb(ahc, scb, target, channel, lun,
6135                                           SCB_LIST_NULL, ROLE_INITIATOR) == 0
6136                          || (ctx != NULL && ctx != scb->io_ctx))
6137                                 continue;
6138
6139                         /*
6140                          * We found an scb that needs to be acted on.
6141                          */
6142                         found++;
6143                         switch (action) {
6144                         case SEARCH_COMPLETE:
6145                         {
6146                                 cam_status ostat;
6147                                 cam_status cstat;
6148
6149                                 ostat = ahc_get_transaction_status(scb);
6150                                 if (ostat == CAM_REQ_INPROG)
6151                                         ahc_set_transaction_status(scb, status);
6152                                 cstat = ahc_get_transaction_status(scb);
6153                                 if (cstat != CAM_REQ_CMP)
6154                                         ahc_freeze_scb(scb);
6155                                 if ((scb->flags & SCB_ACTIVE) == 0)
6156                                         printf("Inactive SCB in untaggedQ\n");
6157                                 ahc_done(ahc, scb);
6158                                 break;
6159                         }
6160                         case SEARCH_REMOVE:
6161                                 scb->flags &= ~SCB_UNTAGGEDQ;
6162                                 TAILQ_REMOVE(untagged_q, scb, links.tqe);
6163                                 break;
6164                         case SEARCH_COUNT:
6165                                 break;
6166                         }
6167                 }
6168         }
6169
6170         if (action == SEARCH_COMPLETE)
6171                 ahc_release_untagged_queues(ahc);
6172         return (found);
6173 }
6174
6175 int
6176 ahc_search_disc_list(struct ahc_softc *ahc, int target, char channel,
6177                      int lun, u_int tag, int stop_on_first, int remove,
6178                      int save_state)
6179 {
6180         struct  scb *scbp;
6181         u_int   next;
6182         u_int   prev;
6183         u_int   count;
6184         u_int   active_scb;
6185
6186         count = 0;
6187         next = ahc_inb(ahc, DISCONNECTED_SCBH);
6188         prev = SCB_LIST_NULL;
6189
6190         if (save_state) {
6191                 /* restore this when we're done */
6192                 active_scb = ahc_inb(ahc, SCBPTR);
6193         } else
6194                 /* Silence compiler */
6195                 active_scb = SCB_LIST_NULL;
6196
6197         while (next != SCB_LIST_NULL) {
6198                 u_int scb_index;
6199
6200                 ahc_outb(ahc, SCBPTR, next);
6201                 scb_index = ahc_inb(ahc, SCB_TAG);
6202                 if (scb_index >= ahc->scb_data->numscbs) {
6203                         printf("Disconnected List inconsistency. "
6204                                "SCB index == %d, yet numscbs == %d.",
6205                                scb_index, ahc->scb_data->numscbs);
6206                         ahc_dump_card_state(ahc);
6207                         panic("for safety");
6208                 }
6209
6210                 if (next == prev) {
6211                         panic("Disconnected List Loop. "
6212                               "cur SCBPTR == %x, prev SCBPTR == %x.",
6213                               next, prev);
6214                 }
6215                 scbp = ahc_lookup_scb(ahc, scb_index);
6216                 if (ahc_match_scb(ahc, scbp, target, channel, lun,
6217                                   tag, ROLE_INITIATOR)) {
6218                         count++;
6219                         if (remove) {
6220                                 next =
6221                                     ahc_rem_scb_from_disc_list(ahc, prev, next);
6222                         } else {
6223                                 prev = next;
6224                                 next = ahc_inb(ahc, SCB_NEXT);
6225                         }
6226                         if (stop_on_first)
6227                                 break;
6228                 } else {
6229                         prev = next;
6230                         next = ahc_inb(ahc, SCB_NEXT);
6231                 }
6232         }
6233         if (save_state)
6234                 ahc_outb(ahc, SCBPTR, active_scb);
6235         return (count);
6236 }
6237
6238 /*
6239  * Remove an SCB from the on chip list of disconnected transactions.
6240  * This is empty/unused if we are not performing SCB paging.
6241  */
6242 static u_int
6243 ahc_rem_scb_from_disc_list(struct ahc_softc *ahc, u_int prev, u_int scbptr)
6244 {
6245         u_int next;
6246
6247         ahc_outb(ahc, SCBPTR, scbptr);
6248         next = ahc_inb(ahc, SCB_NEXT);
6249
6250         ahc_outb(ahc, SCB_CONTROL, 0);
6251
6252         ahc_add_curscb_to_free_list(ahc);
6253
6254         if (prev != SCB_LIST_NULL) {
6255                 ahc_outb(ahc, SCBPTR, prev);
6256                 ahc_outb(ahc, SCB_NEXT, next);
6257         } else
6258                 ahc_outb(ahc, DISCONNECTED_SCBH, next);
6259
6260         return (next);
6261 }
6262
6263 /*
6264  * Add the SCB as selected by SCBPTR onto the on chip list of
6265  * free hardware SCBs.  This list is empty/unused if we are not
6266  * performing SCB paging.
6267  */
6268 static void
6269 ahc_add_curscb_to_free_list(struct ahc_softc *ahc)
6270 {
6271         /*
6272          * Invalidate the tag so that our abort
6273          * routines don't think it's active.
6274          */
6275         ahc_outb(ahc, SCB_TAG, SCB_LIST_NULL);
6276
6277         if ((ahc->flags & AHC_PAGESCBS) != 0) {
6278                 ahc_outb(ahc, SCB_NEXT, ahc_inb(ahc, FREE_SCBH));
6279                 ahc_outb(ahc, FREE_SCBH, ahc_inb(ahc, SCBPTR));
6280         }
6281 }
6282
6283 /*
6284  * Manipulate the waiting for selection list and return the
6285  * scb that follows the one that we remove.
6286  */
6287 static u_int
6288 ahc_rem_wscb(struct ahc_softc *ahc, u_int scbpos, u_int prev)
6289 {
6290         u_int curscb, next;
6291
6292         /*
6293          * Select the SCB we want to abort and
6294          * pull the next pointer out of it.
6295          */
6296         curscb = ahc_inb(ahc, SCBPTR);
6297         ahc_outb(ahc, SCBPTR, scbpos);
6298         next = ahc_inb(ahc, SCB_NEXT);
6299
6300         /* Clear the necessary fields */
6301         ahc_outb(ahc, SCB_CONTROL, 0);
6302
6303         ahc_add_curscb_to_free_list(ahc);
6304
6305         /* update the waiting list */
6306         if (prev == SCB_LIST_NULL) {
6307                 /* First in the list */
6308                 ahc_outb(ahc, WAITING_SCBH, next);
6309
6310                 /*
6311                  * Ensure we aren't attempting to perform
6312                  * selection for this entry.
6313                  */
6314                 ahc_outb(ahc, SCSISEQ, (ahc_inb(ahc, SCSISEQ) & ~ENSELO));
6315         } else {
6316                 /*
6317                  * Select the scb that pointed to us
6318                  * and update its next pointer.
6319                  */
6320                 ahc_outb(ahc, SCBPTR, prev);
6321                 ahc_outb(ahc, SCB_NEXT, next);
6322         }
6323
6324         /*
6325          * Point us back at the original scb position.
6326          */
6327         ahc_outb(ahc, SCBPTR, curscb);
6328         return next;
6329 }
6330
6331 /******************************** Error Handling ******************************/
6332 /*
6333  * Abort all SCBs that match the given description (target/channel/lun/tag),
6334  * setting their status to the passed in status if the status has not already
6335  * been modified from CAM_REQ_INPROG.  This routine assumes that the sequencer
6336  * is paused before it is called.
6337  */
6338 static int
6339 ahc_abort_scbs(struct ahc_softc *ahc, int target, char channel,
6340                int lun, u_int tag, role_t role, uint32_t status)
6341 {
6342         struct  scb *scbp;
6343         struct  scb *scbp_next;
6344         u_int   active_scb;
6345         int     i, j;
6346         int     maxtarget;
6347         int     minlun;
6348         int     maxlun;
6349
6350         int     found;
6351
6352         /*
6353          * Don't attempt to run any queued untagged transactions
6354          * until we are done with the abort process.
6355          */
6356         ahc_freeze_untagged_queues(ahc);
6357
6358         /* restore this when we're done */
6359         active_scb = ahc_inb(ahc, SCBPTR);
6360
6361         found = ahc_search_qinfifo(ahc, target, channel, lun, SCB_LIST_NULL,
6362                                    role, CAM_REQUEUE_REQ, SEARCH_COMPLETE);
6363
6364         /*
6365          * Clean out the busy target table for any untagged commands.
6366          */
6367         i = 0;
6368         maxtarget = 16;
6369         if (target != CAM_TARGET_WILDCARD) {
6370                 i = target;
6371                 if (channel == 'B')
6372                         i += 8;
6373                 maxtarget = i + 1;
6374         }
6375
6376         if (lun == CAM_LUN_WILDCARD) {
6377
6378                 /*
6379                  * Unless we are using an SCB based
6380                  * busy targets table, there is only
6381                  * one table entry for all luns of
6382                  * a target.
6383                  */
6384                 minlun = 0;
6385                 maxlun = 1;
6386                 if ((ahc->flags & AHC_SCB_BTT) != 0)
6387                         maxlun = AHC_NUM_LUNS;
6388         } else {
6389                 minlun = lun;
6390                 maxlun = lun + 1;
6391         }
6392
6393         if (role != ROLE_TARGET) {
6394                 for (;i < maxtarget; i++) {
6395                         for (j = minlun;j < maxlun; j++) {
6396                                 u_int scbid;
6397                                 u_int tcl;
6398
6399                                 tcl = BUILD_TCL(i << 4, j);
6400                                 scbid = ahc_index_busy_tcl(ahc, tcl);
6401                                 scbp = ahc_lookup_scb(ahc, scbid);
6402                                 if (scbp == NULL
6403                                  || ahc_match_scb(ahc, scbp, target, channel,
6404                                                   lun, tag, role) == 0)
6405                                         continue;
6406                                 ahc_unbusy_tcl(ahc, BUILD_TCL(i << 4, j));
6407                         }
6408                 }
6409
6410                 /*
6411                  * Go through the disconnected list and remove any entries we
6412                  * have queued for completion, 0'ing their control byte too.
6413                  * We save the active SCB and restore it ourselves, so there
6414                  * is no reason for this search to restore it too.
6415                  */
6416                 ahc_search_disc_list(ahc, target, channel, lun, tag,
6417                                      /*stop_on_first*/FALSE, /*remove*/TRUE,
6418                                      /*save_state*/FALSE);
6419         }
6420
6421         /*
6422          * Go through the hardware SCB array looking for commands that
6423          * were active but not on any list.  In some cases, these remnants
6424          * might not still have mappings in the scbindex array (e.g. unexpected
6425          * bus free with the same scb queued for an abort).  Don't hold this
6426          * against them.
6427          */
6428         for (i = 0; i < ahc->scb_data->maxhscbs; i++) {
6429                 u_int scbid;
6430
6431                 ahc_outb(ahc, SCBPTR, i);
6432                 scbid = ahc_inb(ahc, SCB_TAG);
6433                 scbp = ahc_lookup_scb(ahc, scbid);
6434                 if ((scbp == NULL && scbid != SCB_LIST_NULL)
6435                  || (scbp != NULL
6436                   && ahc_match_scb(ahc, scbp, target, channel, lun, tag, role)))
6437                         ahc_add_curscb_to_free_list(ahc);
6438         }
6439
6440         /*
6441          * Go through the pending CCB list and look for
6442          * commands for this target that are still active.
6443          * These are other tagged commands that were
6444          * disconnected when the reset occurred.
6445          */
6446         scbp_next = LIST_FIRST(&ahc->pending_scbs);
6447         while (scbp_next != NULL) {
6448                 scbp = scbp_next;
6449                 scbp_next = LIST_NEXT(scbp, pending_links);
6450                 if (ahc_match_scb(ahc, scbp, target, channel, lun, tag, role)) {
6451                         cam_status ostat;
6452
6453                         ostat = ahc_get_transaction_status(scbp);
6454                         if (ostat == CAM_REQ_INPROG)
6455                                 ahc_set_transaction_status(scbp, status);
6456                         if (ahc_get_transaction_status(scbp) != CAM_REQ_CMP)
6457                                 ahc_freeze_scb(scbp);
6458                         if ((scbp->flags & SCB_ACTIVE) == 0)
6459                                 printf("Inactive SCB on pending list\n");
6460                         ahc_done(ahc, scbp);
6461                         found++;
6462                 }
6463         }
6464         ahc_outb(ahc, SCBPTR, active_scb);
6465         ahc_platform_abort_scbs(ahc, target, channel, lun, tag, role, status);
6466         ahc_release_untagged_queues(ahc);
6467         return found;
6468 }
6469
6470 static void
6471 ahc_reset_current_bus(struct ahc_softc *ahc)
6472 {
6473         uint8_t scsiseq;
6474
6475         ahc_outb(ahc, SIMODE1, ahc_inb(ahc, SIMODE1) & ~ENSCSIRST);
6476         scsiseq = ahc_inb(ahc, SCSISEQ);
6477         ahc_outb(ahc, SCSISEQ, scsiseq | SCSIRSTO);
6478         ahc_flush_device_writes(ahc);
6479         ahc_delay(AHC_BUSRESET_DELAY);
6480         /* Turn off the bus reset */
6481         ahc_outb(ahc, SCSISEQ, scsiseq & ~SCSIRSTO);
6482
6483         ahc_clear_intstat(ahc);
6484
6485         /* Re-enable reset interrupts */
6486         ahc_outb(ahc, SIMODE1, ahc_inb(ahc, SIMODE1) | ENSCSIRST);
6487 }
6488
6489 int
6490 ahc_reset_channel(struct ahc_softc *ahc, char channel, int initiate_reset)
6491 {
6492         struct  ahc_devinfo devinfo;
6493         u_int   initiator, target, max_scsiid;
6494         u_int   sblkctl;
6495         u_int   scsiseq;
6496         u_int   simode1;
6497         int     found;
6498         int     restart_needed;
6499         char    cur_channel;
6500
6501         ahc->pending_device = NULL;
6502
6503         ahc_compile_devinfo(&devinfo,
6504                             CAM_TARGET_WILDCARD,
6505                             CAM_TARGET_WILDCARD,
6506                             CAM_LUN_WILDCARD,
6507                             channel, ROLE_UNKNOWN);
6508         ahc_pause(ahc);
6509
6510         /* Make sure the sequencer is in a safe location. */
6511         ahc_clear_critical_section(ahc);
6512
6513         /*
6514          * Run our command complete fifos to ensure that we perform
6515          * completion processing on any commands that 'completed'
6516          * before the reset occurred.
6517          */
6518         ahc_run_qoutfifo(ahc);
6519 #ifdef AHC_TARGET_MODE
6520         /*
6521          * XXX - In Twin mode, the tqinfifo may have commands
6522          *       for an unaffected channel in it.  However, if
6523          *       we have run out of ATIO resources to drain that
6524          *       queue, we may not get them all out here.  Further,
6525          *       the blocked transactions for the reset channel
6526          *       should just be killed off, irrespecitve of whether
6527          *       we are blocked on ATIO resources.  Write a routine
6528          *       to compact the tqinfifo appropriately.
6529          */
6530         if ((ahc->flags & AHC_TARGETROLE) != 0) {
6531                 ahc_run_tqinfifo(ahc, /*paused*/TRUE);
6532         }
6533 #endif
6534
6535         /*
6536          * Reset the bus if we are initiating this reset
6537          */
6538         sblkctl = ahc_inb(ahc, SBLKCTL);
6539         cur_channel = 'A';
6540         if ((ahc->features & AHC_TWIN) != 0
6541          && ((sblkctl & SELBUSB) != 0))
6542             cur_channel = 'B';
6543         scsiseq = ahc_inb(ahc, SCSISEQ_TEMPLATE);
6544         if (cur_channel != channel) {
6545                 /* Case 1: Command for another bus is active
6546                  * Stealthily reset the other bus without
6547                  * upsetting the current bus.
6548                  */
6549                 ahc_outb(ahc, SBLKCTL, sblkctl ^ SELBUSB);
6550                 simode1 = ahc_inb(ahc, SIMODE1) & ~(ENBUSFREE|ENSCSIRST);
6551 #ifdef AHC_TARGET_MODE
6552                 /*
6553                  * Bus resets clear ENSELI, so we cannot
6554                  * defer re-enabling bus reset interrupts
6555                  * if we are in target mode.
6556                  */
6557                 if ((ahc->flags & AHC_TARGETROLE) != 0)
6558                         simode1 |= ENSCSIRST;
6559 #endif
6560                 ahc_outb(ahc, SIMODE1, simode1);
6561                 if (initiate_reset)
6562                         ahc_reset_current_bus(ahc);
6563                 ahc_clear_intstat(ahc);
6564                 ahc_outb(ahc, SCSISEQ, scsiseq & (ENSELI|ENRSELI|ENAUTOATNP));
6565                 ahc_outb(ahc, SBLKCTL, sblkctl);
6566                 restart_needed = FALSE;
6567         } else {
6568                 /* Case 2: A command from this bus is active or we're idle */
6569                 simode1 = ahc_inb(ahc, SIMODE1) & ~(ENBUSFREE|ENSCSIRST);
6570 #ifdef AHC_TARGET_MODE
6571                 /*
6572                  * Bus resets clear ENSELI, so we cannot
6573                  * defer re-enabling bus reset interrupts
6574                  * if we are in target mode.
6575                  */
6576                 if ((ahc->flags & AHC_TARGETROLE) != 0)
6577                         simode1 |= ENSCSIRST;
6578 #endif
6579                 ahc_outb(ahc, SIMODE1, simode1);
6580                 if (initiate_reset)
6581                         ahc_reset_current_bus(ahc);
6582                 ahc_clear_intstat(ahc);
6583                 ahc_outb(ahc, SCSISEQ, scsiseq & (ENSELI|ENRSELI|ENAUTOATNP));
6584                 restart_needed = TRUE;
6585         }
6586
6587         /*
6588          * Clean up all the state information for the
6589          * pending transactions on this bus.
6590          */
6591         found = ahc_abort_scbs(ahc, CAM_TARGET_WILDCARD, channel,
6592                                CAM_LUN_WILDCARD, SCB_LIST_NULL,
6593                                ROLE_UNKNOWN, CAM_SCSI_BUS_RESET);
6594
6595         max_scsiid = (ahc->features & AHC_WIDE) ? 15 : 7;
6596
6597 #ifdef AHC_TARGET_MODE
6598         /*
6599          * Send an immediate notify ccb to all target more peripheral
6600          * drivers affected by this action.
6601          */
6602         for (target = 0; target <= max_scsiid; target++) {
6603                 struct ahc_tmode_tstate* tstate;
6604                 u_int lun;
6605
6606                 tstate = ahc->enabled_targets[target];
6607                 if (tstate == NULL)
6608                         continue;
6609                 for (lun = 0; lun < AHC_NUM_LUNS; lun++) {
6610                         struct ahc_tmode_lstate* lstate;
6611
6612                         lstate = tstate->enabled_luns[lun];
6613                         if (lstate == NULL)
6614                                 continue;
6615
6616                         ahc_queue_lstate_event(ahc, lstate, CAM_TARGET_WILDCARD,
6617                                                EVENT_TYPE_BUS_RESET, /*arg*/0);
6618                         ahc_send_lstate_events(ahc, lstate);
6619                 }
6620         }
6621 #endif
6622         /* Notify the XPT that a bus reset occurred */
6623         ahc_send_async(ahc, devinfo.channel, CAM_TARGET_WILDCARD,
6624                        CAM_LUN_WILDCARD, AC_BUS_RESET);
6625
6626         /*
6627          * Revert to async/narrow transfers until we renegotiate.
6628          */
6629         for (target = 0; target <= max_scsiid; target++) {
6630
6631                 if (ahc->enabled_targets[target] == NULL)
6632                         continue;
6633                 for (initiator = 0; initiator <= max_scsiid; initiator++) {
6634                         struct ahc_devinfo devinfo;
6635
6636                         ahc_compile_devinfo(&devinfo, target, initiator,
6637                                             CAM_LUN_WILDCARD,
6638                                             channel, ROLE_UNKNOWN);
6639                         ahc_set_width(ahc, &devinfo, MSG_EXT_WDTR_BUS_8_BIT,
6640                                       AHC_TRANS_CUR, /*paused*/TRUE);
6641                         ahc_set_syncrate(ahc, &devinfo, /*syncrate*/NULL,
6642                                          /*period*/0, /*offset*/0,
6643                                          /*ppr_options*/0, AHC_TRANS_CUR,
6644                                          /*paused*/TRUE);
6645                 }
6646         }
6647
6648         if (restart_needed)
6649                 ahc_restart(ahc);
6650         else
6651                 ahc_unpause(ahc);
6652         return found;
6653 }
6654
6655
6656 /***************************** Residual Processing ****************************/
6657 /*
6658  * Calculate the residual for a just completed SCB.
6659  */
6660 static void
6661 ahc_calc_residual(struct ahc_softc *ahc, struct scb *scb)
6662 {
6663         struct hardware_scb *hscb;
6664         struct status_pkt *spkt;
6665         uint32_t sgptr;
6666         uint32_t resid_sgptr;
6667         uint32_t resid;
6668
6669         /*
6670          * 5 cases.
6671          * 1) No residual.
6672          *    SG_RESID_VALID clear in sgptr.
6673          * 2) Transferless command
6674          * 3) Never performed any transfers.
6675          *    sgptr has SG_FULL_RESID set.
6676          * 4) No residual but target did not
6677          *    save data pointers after the
6678          *    last transfer, so sgptr was
6679          *    never updated.
6680          * 5) We have a partial residual.
6681          *    Use residual_sgptr to determine
6682          *    where we are.
6683          */
6684
6685         hscb = scb->hscb;
6686         sgptr = ahc_le32toh(hscb->sgptr);
6687         if ((sgptr & SG_RESID_VALID) == 0)
6688                 /* Case 1 */
6689                 return;
6690         sgptr &= ~SG_RESID_VALID;
6691
6692         if ((sgptr & SG_LIST_NULL) != 0)
6693                 /* Case 2 */
6694                 return;
6695
6696         spkt = &hscb->shared_data.status;
6697         resid_sgptr = ahc_le32toh(spkt->residual_sg_ptr);
6698         if ((sgptr & SG_FULL_RESID) != 0) {
6699                 /* Case 3 */
6700                 resid = ahc_get_transfer_length(scb);
6701         } else if ((resid_sgptr & SG_LIST_NULL) != 0) {
6702                 /* Case 4 */
6703                 return;
6704         } else if ((resid_sgptr & ~SG_PTR_MASK) != 0) {
6705                 panic("Bogus resid sgptr value 0x%x\n", resid_sgptr);
6706         } else {
6707                 struct ahc_dma_seg *sg;
6708
6709                 /*
6710                  * Remainder of the SG where the transfer
6711                  * stopped.
6712                  */
6713                 resid = ahc_le32toh(spkt->residual_datacnt) & AHC_SG_LEN_MASK;
6714                 sg = ahc_sg_bus_to_virt(scb, resid_sgptr & SG_PTR_MASK);
6715
6716                 /* The residual sg_ptr always points to the next sg */
6717                 sg--;
6718
6719                 /*
6720                  * Add up the contents of all residual
6721                  * SG segments that are after the SG where
6722                  * the transfer stopped.
6723                  */
6724                 while ((ahc_le32toh(sg->len) & AHC_DMA_LAST_SEG) == 0) {
6725                         sg++;
6726                         resid += ahc_le32toh(sg->len) & AHC_SG_LEN_MASK;
6727                 }
6728         }
6729         if ((scb->flags & SCB_SENSE) == 0)
6730                 ahc_set_residual(scb, resid);
6731         else
6732                 ahc_set_sense_residual(scb, resid);
6733
6734 #ifdef AHC_DEBUG
6735         if ((ahc_debug & AHC_SHOW_MISC) != 0) {
6736                 ahc_print_path(ahc, scb);
6737                 printf("Handled %sResidual of %d bytes\n",
6738                        (scb->flags & SCB_SENSE) ? "Sense " : "", resid);
6739         }
6740 #endif
6741 }
6742
6743 /******************************* Target Mode **********************************/
6744 #ifdef AHC_TARGET_MODE
6745 /*
6746  * Add a target mode event to this lun's queue
6747  */
6748 static void
6749 ahc_queue_lstate_event(struct ahc_softc *ahc, struct ahc_tmode_lstate *lstate,
6750                        u_int initiator_id, u_int event_type, u_int event_arg)
6751 {
6752         struct ahc_tmode_event *event;
6753         int pending;
6754
6755         xpt_freeze_devq(lstate->path, /*count*/1);
6756         if (lstate->event_w_idx >= lstate->event_r_idx)
6757                 pending = lstate->event_w_idx - lstate->event_r_idx;
6758         else
6759                 pending = AHC_TMODE_EVENT_BUFFER_SIZE + 1
6760                         - (lstate->event_r_idx - lstate->event_w_idx);
6761
6762         if (event_type == EVENT_TYPE_BUS_RESET
6763          || event_type == MSG_BUS_DEV_RESET) {
6764                 /*
6765                  * Any earlier events are irrelevant, so reset our buffer.
6766                  * This has the effect of allowing us to deal with reset
6767                  * floods (an external device holding down the reset line)
6768                  * without losing the event that is really interesting.
6769                  */
6770                 lstate->event_r_idx = 0;
6771                 lstate->event_w_idx = 0;
6772                 xpt_release_devq(lstate->path, pending, /*runqueue*/FALSE);
6773         }
6774
6775         if (pending == AHC_TMODE_EVENT_BUFFER_SIZE) {
6776                 xpt_print_path(lstate->path);
6777                 printf("immediate event %x:%x lost\n",
6778                        lstate->event_buffer[lstate->event_r_idx].event_type,
6779                        lstate->event_buffer[lstate->event_r_idx].event_arg);
6780                 lstate->event_r_idx++;
6781                 if (lstate->event_r_idx == AHC_TMODE_EVENT_BUFFER_SIZE)
6782                         lstate->event_r_idx = 0;
6783                 xpt_release_devq(lstate->path, /*count*/1, /*runqueue*/FALSE);
6784         }
6785
6786         event = &lstate->event_buffer[lstate->event_w_idx];
6787         event->initiator_id = initiator_id;
6788         event->event_type = event_type;
6789         event->event_arg = event_arg;
6790         lstate->event_w_idx++;
6791         if (lstate->event_w_idx == AHC_TMODE_EVENT_BUFFER_SIZE)
6792                 lstate->event_w_idx = 0;
6793 }
6794
6795 /*
6796  * Send any target mode events queued up waiting
6797  * for immediate notify resources.
6798  */
6799 void
6800 ahc_send_lstate_events(struct ahc_softc *ahc, struct ahc_tmode_lstate *lstate)
6801 {
6802         struct ccb_hdr *ccbh;
6803         struct ccb_immed_notify *inot;
6804
6805         while (lstate->event_r_idx != lstate->event_w_idx
6806             && (ccbh = SLIST_FIRST(&lstate->immed_notifies)) != NULL) {
6807                 struct ahc_tmode_event *event;
6808
6809                 event = &lstate->event_buffer[lstate->event_r_idx];
6810                 SLIST_REMOVE_HEAD(&lstate->immed_notifies, sim_links.sle);
6811                 inot = (struct ccb_immed_notify *)ccbh;
6812                 switch (event->event_type) {
6813                 case EVENT_TYPE_BUS_RESET:
6814                         ccbh->status = CAM_SCSI_BUS_RESET|CAM_DEV_QFRZN;
6815                         break;
6816                 default:
6817                         ccbh->status = CAM_MESSAGE_RECV|CAM_DEV_QFRZN;
6818                         inot->message_args[0] = event->event_type;
6819                         inot->message_args[1] = event->event_arg;
6820                         break;
6821                 }
6822                 inot->initiator_id = event->initiator_id;
6823                 inot->sense_len = 0;
6824                 xpt_done((union ccb *)inot);
6825                 lstate->event_r_idx++;
6826                 if (lstate->event_r_idx == AHC_TMODE_EVENT_BUFFER_SIZE)
6827                         lstate->event_r_idx = 0;
6828         }
6829 }
6830 #endif
6831
6832 /******************** Sequencer Program Patching/Download *********************/
6833
6834 #ifdef AHC_DUMP_SEQ
6835 void
6836 ahc_dumpseq(struct ahc_softc* ahc)
6837 {
6838         int i;
6839
6840         ahc_outb(ahc, SEQCTL, PERRORDIS|FAILDIS|FASTMODE|LOADRAM);
6841         ahc_outb(ahc, SEQADDR0, 0);
6842         ahc_outb(ahc, SEQADDR1, 0);
6843         for (i = 0; i < ahc->instruction_ram_size; i++) {
6844                 uint8_t ins_bytes[4];
6845
6846                 ahc_insb(ahc, SEQRAM, ins_bytes, 4);
6847                 printf("0x%08x\n", ins_bytes[0] << 24
6848                                  | ins_bytes[1] << 16
6849                                  | ins_bytes[2] << 8
6850                                  | ins_bytes[3]);
6851         }
6852 }
6853 #endif
6854
6855 static int
6856 ahc_loadseq(struct ahc_softc *ahc)
6857 {
6858         struct  cs cs_table[num_critical_sections];
6859         u_int   begin_set[num_critical_sections];
6860         u_int   end_set[num_critical_sections];
6861         const struct patch *cur_patch;
6862         u_int   cs_count;
6863         u_int   cur_cs;
6864         u_int   i;
6865         u_int   skip_addr;
6866         u_int   sg_prefetch_cnt;
6867         int     downloaded;
6868         uint8_t download_consts[7];
6869
6870         /*
6871          * Start out with 0 critical sections
6872          * that apply to this firmware load.
6873          */
6874         cs_count = 0;
6875         cur_cs = 0;
6876         memset(begin_set, 0, sizeof(begin_set));
6877         memset(end_set, 0, sizeof(end_set));
6878
6879         /* Setup downloadable constant table */
6880         download_consts[QOUTFIFO_OFFSET] = 0;
6881         if (ahc->targetcmds != NULL)
6882                 download_consts[QOUTFIFO_OFFSET] += 32;
6883         download_consts[QINFIFO_OFFSET] = download_consts[QOUTFIFO_OFFSET] + 1;
6884         download_consts[CACHESIZE_MASK] = ahc->pci_cachesize - 1;
6885         download_consts[INVERTED_CACHESIZE_MASK] = ~(ahc->pci_cachesize - 1);
6886         sg_prefetch_cnt = ahc->pci_cachesize;
6887         if (sg_prefetch_cnt < (2 * sizeof(struct ahc_dma_seg)))
6888                 sg_prefetch_cnt = 2 * sizeof(struct ahc_dma_seg);
6889         download_consts[SG_PREFETCH_CNT] = sg_prefetch_cnt;
6890         download_consts[SG_PREFETCH_ALIGN_MASK] = ~(sg_prefetch_cnt - 1);
6891         download_consts[SG_PREFETCH_ADDR_MASK] = (sg_prefetch_cnt - 1);
6892
6893         cur_patch = patches;
6894         downloaded = 0;
6895         skip_addr = 0;
6896         ahc_outb(ahc, SEQCTL, PERRORDIS|FAILDIS|FASTMODE|LOADRAM);
6897         ahc_outb(ahc, SEQADDR0, 0);
6898         ahc_outb(ahc, SEQADDR1, 0);
6899
6900         for (i = 0; i < sizeof(seqprog)/4; i++) {
6901                 if (ahc_check_patch(ahc, &cur_patch, i, &skip_addr) == 0) {
6902                         /*
6903                          * Don't download this instruction as it
6904                          * is in a patch that was removed.
6905                          */
6906                         continue;
6907                 }
6908
6909                 if (downloaded == ahc->instruction_ram_size) {
6910                         /*
6911                          * We're about to exceed the instruction
6912                          * storage capacity for this chip.  Fail
6913                          * the load.
6914                          */
6915                         printf("\n%s: Program too large for instruction memory "
6916                                "size of %d!\n", ahc_name(ahc),
6917                                ahc->instruction_ram_size);
6918                         return (ENOMEM);
6919                 }
6920
6921                 /*
6922                  * Move through the CS table until we find a CS
6923                  * that might apply to this instruction.
6924                  */
6925                 for (; cur_cs < num_critical_sections; cur_cs++) {
6926                         if (critical_sections[cur_cs].end <= i) {
6927                                 if (begin_set[cs_count] == TRUE
6928                                  && end_set[cs_count] == FALSE) {
6929                                         cs_table[cs_count].end = downloaded;
6930                                         end_set[cs_count] = TRUE;
6931                                         cs_count++;
6932                                 }
6933                                 continue;
6934                         }
6935                         if (critical_sections[cur_cs].begin <= i
6936                          && begin_set[cs_count] == FALSE) {
6937                                 cs_table[cs_count].begin = downloaded;
6938                                 begin_set[cs_count] = TRUE;
6939                         }
6940                         break;
6941                 }
6942                 ahc_download_instr(ahc, i, download_consts);
6943                 downloaded++;
6944         }
6945
6946         ahc->num_critical_sections = cs_count;
6947         if (cs_count != 0) {
6948
6949                 cs_count *= sizeof(struct cs);
6950                 ahc->critical_sections = malloc(cs_count, M_DEVBUF, M_NOWAIT);
6951                 if (ahc->critical_sections == NULL)
6952                         panic("ahc_loadseq: Could not malloc");
6953                 memcpy(ahc->critical_sections, cs_table, cs_count);
6954         }
6955         ahc_outb(ahc, SEQCTL, PERRORDIS|FAILDIS|FASTMODE);
6956
6957         if (bootverbose) {
6958                 printf(" %d instructions downloaded\n", downloaded);
6959                 printf("%s: Features 0x%x, Bugs 0x%x, Flags 0x%x\n",
6960                        ahc_name(ahc), ahc->features, ahc->bugs, ahc->flags);
6961         }
6962         return (0);
6963 }
6964
6965 static int
6966 ahc_check_patch(struct ahc_softc *ahc, const struct patch **start_patch,
6967                 u_int start_instr, u_int *skip_addr)
6968 {
6969         const struct patch *cur_patch;
6970         const struct patch *last_patch;
6971         u_int   num_patches;
6972
6973         num_patches = ARRAY_SIZE(patches);
6974         last_patch = &patches[num_patches];
6975         cur_patch = *start_patch;
6976
6977         while (cur_patch < last_patch && start_instr == cur_patch->begin) {
6978
6979                 if (cur_patch->patch_func(ahc) == 0) {
6980
6981                         /* Start rejecting code */
6982                         *skip_addr = start_instr + cur_patch->skip_instr;
6983                         cur_patch += cur_patch->skip_patch;
6984                 } else {
6985                         /* Accepted this patch.  Advance to the next
6986                          * one and wait for our intruction pointer to
6987                          * hit this point.
6988                          */
6989                         cur_patch++;
6990                 }
6991         }
6992
6993         *start_patch = cur_patch;
6994         if (start_instr < *skip_addr)
6995                 /* Still skipping */
6996                 return (0);
6997
6998         return (1);
6999 }
7000
7001 static void
7002 ahc_download_instr(struct ahc_softc *ahc, u_int instrptr, uint8_t *dconsts)
7003 {
7004         union   ins_formats instr;
7005         struct  ins_format1 *fmt1_ins;
7006         struct  ins_format3 *fmt3_ins;
7007         u_int   opcode;
7008
7009         /*
7010          * The firmware is always compiled into a little endian format.
7011          */
7012         instr.integer = ahc_le32toh(*(uint32_t*)&seqprog[instrptr * 4]);
7013
7014         fmt1_ins = &instr.format1;
7015         fmt3_ins = NULL;
7016
7017         /* Pull the opcode */
7018         opcode = instr.format1.opcode;
7019         switch (opcode) {
7020         case AIC_OP_JMP:
7021         case AIC_OP_JC:
7022         case AIC_OP_JNC:
7023         case AIC_OP_CALL:
7024         case AIC_OP_JNE:
7025         case AIC_OP_JNZ:
7026         case AIC_OP_JE:
7027         case AIC_OP_JZ:
7028         {
7029                 const struct patch *cur_patch;
7030                 int address_offset;
7031                 u_int address;
7032                 u_int skip_addr;
7033                 u_int i;
7034
7035                 fmt3_ins = &instr.format3;
7036                 address_offset = 0;
7037                 address = fmt3_ins->address;
7038                 cur_patch = patches;
7039                 skip_addr = 0;
7040
7041                 for (i = 0; i < address;) {
7042
7043                         ahc_check_patch(ahc, &cur_patch, i, &skip_addr);
7044
7045                         if (skip_addr > i) {
7046                                 int end_addr;
7047
7048                                 end_addr = min(address, skip_addr);
7049                                 address_offset += end_addr - i;
7050                                 i = skip_addr;
7051                         } else {
7052                                 i++;
7053                         }
7054                 }
7055                 address -= address_offset;
7056                 fmt3_ins->address = address;
7057                 /* FALLTHROUGH */
7058         }
7059         case AIC_OP_OR:
7060         case AIC_OP_AND:
7061         case AIC_OP_XOR:
7062         case AIC_OP_ADD:
7063         case AIC_OP_ADC:
7064         case AIC_OP_BMOV:
7065                 if (fmt1_ins->parity != 0) {
7066                         fmt1_ins->immediate = dconsts[fmt1_ins->immediate];
7067                 }
7068                 fmt1_ins->parity = 0;
7069                 if ((ahc->features & AHC_CMD_CHAN) == 0
7070                  && opcode == AIC_OP_BMOV) {
7071                         /*
7072                          * Block move was added at the same time
7073                          * as the command channel.  Verify that
7074                          * this is only a move of a single element
7075                          * and convert the BMOV to a MOV
7076                          * (AND with an immediate of FF).
7077                          */
7078                         if (fmt1_ins->immediate != 1)
7079                                 panic("%s: BMOV not supported\n",
7080                                       ahc_name(ahc));
7081                         fmt1_ins->opcode = AIC_OP_AND;
7082                         fmt1_ins->immediate = 0xff;
7083                 }
7084                 /* FALLTHROUGH */
7085         case AIC_OP_ROL:
7086                 if ((ahc->features & AHC_ULTRA2) != 0) {
7087                         int i, count;
7088
7089                         /* Calculate odd parity for the instruction */
7090                         for (i = 0, count = 0; i < 31; i++) {
7091                                 uint32_t mask;
7092
7093                                 mask = 0x01 << i;
7094                                 if ((instr.integer & mask) != 0)
7095                                         count++;
7096                         }
7097                         if ((count & 0x01) == 0)
7098                                 instr.format1.parity = 1;
7099                 } else {
7100                         /* Compress the instruction for older sequencers */
7101                         if (fmt3_ins != NULL) {
7102                                 instr.integer =
7103                                         fmt3_ins->immediate
7104                                       | (fmt3_ins->source << 8)
7105                                       | (fmt3_ins->address << 16)
7106                                       | (fmt3_ins->opcode << 25);
7107                         } else {
7108                                 instr.integer =
7109                                         fmt1_ins->immediate
7110                                       | (fmt1_ins->source << 8)
7111                                       | (fmt1_ins->destination << 16)
7112                                       | (fmt1_ins->ret << 24)
7113                                       | (fmt1_ins->opcode << 25);
7114                         }
7115                 }
7116                 /* The sequencer is a little endian cpu */
7117                 instr.integer = ahc_htole32(instr.integer);
7118                 ahc_outsb(ahc, SEQRAM, instr.bytes, 4);
7119                 break;
7120         default:
7121                 panic("Unknown opcode encountered in seq program");
7122                 break;
7123         }
7124 }
7125
7126 int
7127 ahc_print_register(const ahc_reg_parse_entry_t *table, u_int num_entries,
7128                    const char *name, u_int address, u_int value,
7129                    u_int *cur_column, u_int wrap_point)
7130 {
7131         int     printed;
7132         u_int   printed_mask;
7133
7134         if (cur_column != NULL && *cur_column >= wrap_point) {
7135                 printf("\n");
7136                 *cur_column = 0;
7137         }
7138         printed = printf("%s[0x%x]", name, value);
7139         if (table == NULL) {
7140                 printed += printf(" ");
7141                 *cur_column += printed;
7142                 return (printed);
7143         }
7144         printed_mask = 0;
7145         while (printed_mask != 0xFF) {
7146                 int entry;
7147
7148                 for (entry = 0; entry < num_entries; entry++) {
7149                         if (((value & table[entry].mask)
7150                           != table[entry].value)
7151                          || ((printed_mask & table[entry].mask)
7152                           == table[entry].mask))
7153                                 continue;
7154
7155                         printed += printf("%s%s",
7156                                           printed_mask == 0 ? ":(" : "|",
7157                                           table[entry].name);
7158                         printed_mask |= table[entry].mask;
7159
7160                         break;
7161                 }
7162                 if (entry >= num_entries)
7163                         break;
7164         }
7165         if (printed_mask != 0)
7166                 printed += printf(") ");
7167         else
7168                 printed += printf(" ");
7169         if (cur_column != NULL)
7170                 *cur_column += printed;
7171         return (printed);
7172 }
7173
7174 void
7175 ahc_dump_card_state(struct ahc_softc *ahc)
7176 {
7177         struct  scb *scb;
7178         struct  scb_tailq *untagged_q;
7179         u_int   cur_col;
7180         int     paused;
7181         int     target;
7182         int     maxtarget;
7183         int     i;
7184         uint8_t last_phase;
7185         uint8_t qinpos;
7186         uint8_t qintail;
7187         uint8_t qoutpos;
7188         uint8_t scb_index;
7189         uint8_t saved_scbptr;
7190
7191         if (ahc_is_paused(ahc)) {
7192                 paused = 1;
7193         } else {
7194                 paused = 0;
7195                 ahc_pause(ahc);
7196         }
7197
7198         saved_scbptr = ahc_inb(ahc, SCBPTR);
7199         last_phase = ahc_inb(ahc, LASTPHASE);
7200         printf(">>>>>>>>>>>>>>>>>> Dump Card State Begins <<<<<<<<<<<<<<<<<\n"
7201                "%s: Dumping Card State %s, at SEQADDR 0x%x\n",
7202                ahc_name(ahc), ahc_lookup_phase_entry(last_phase)->phasemsg,
7203                ahc_inb(ahc, SEQADDR0) | (ahc_inb(ahc, SEQADDR1) << 8));
7204         if (paused)
7205                 printf("Card was paused\n");
7206         printf("ACCUM = 0x%x, SINDEX = 0x%x, DINDEX = 0x%x, ARG_2 = 0x%x\n",
7207                ahc_inb(ahc, ACCUM), ahc_inb(ahc, SINDEX), ahc_inb(ahc, DINDEX),
7208                ahc_inb(ahc, ARG_2));
7209         printf("HCNT = 0x%x SCBPTR = 0x%x\n", ahc_inb(ahc, HCNT),
7210                ahc_inb(ahc, SCBPTR));
7211         cur_col = 0;
7212         if ((ahc->features & AHC_DT) != 0)
7213                 ahc_scsiphase_print(ahc_inb(ahc, SCSIPHASE), &cur_col, 50);
7214         ahc_scsisigi_print(ahc_inb(ahc, SCSISIGI), &cur_col, 50);
7215         ahc_error_print(ahc_inb(ahc, ERROR), &cur_col, 50);
7216         ahc_scsibusl_print(ahc_inb(ahc, SCSIBUSL), &cur_col, 50);
7217         ahc_lastphase_print(ahc_inb(ahc, LASTPHASE), &cur_col, 50);
7218         ahc_scsiseq_print(ahc_inb(ahc, SCSISEQ), &cur_col, 50);
7219         ahc_sblkctl_print(ahc_inb(ahc, SBLKCTL), &cur_col, 50);
7220         ahc_scsirate_print(ahc_inb(ahc, SCSIRATE), &cur_col, 50);
7221         ahc_seqctl_print(ahc_inb(ahc, SEQCTL), &cur_col, 50);
7222         ahc_seq_flags_print(ahc_inb(ahc, SEQ_FLAGS), &cur_col, 50);
7223         ahc_sstat0_print(ahc_inb(ahc, SSTAT0), &cur_col, 50);
7224         ahc_sstat1_print(ahc_inb(ahc, SSTAT1), &cur_col, 50);
7225         ahc_sstat2_print(ahc_inb(ahc, SSTAT2), &cur_col, 50);
7226         ahc_sstat3_print(ahc_inb(ahc, SSTAT3), &cur_col, 50);
7227         ahc_simode0_print(ahc_inb(ahc, SIMODE0), &cur_col, 50);
7228         ahc_simode1_print(ahc_inb(ahc, SIMODE1), &cur_col, 50);
7229         ahc_sxfrctl0_print(ahc_inb(ahc, SXFRCTL0), &cur_col, 50);
7230         ahc_dfcntrl_print(ahc_inb(ahc, DFCNTRL), &cur_col, 50);
7231         ahc_dfstatus_print(ahc_inb(ahc, DFSTATUS), &cur_col, 50);
7232         if (cur_col != 0)
7233                 printf("\n");
7234         printf("STACK:");
7235         for (i = 0; i < STACK_SIZE; i++)
7236                printf(" 0x%x", ahc_inb(ahc, STACK)|(ahc_inb(ahc, STACK) << 8));
7237         printf("\nSCB count = %d\n", ahc->scb_data->numscbs);
7238         printf("Kernel NEXTQSCB = %d\n", ahc->next_queued_scb->hscb->tag);
7239         printf("Card NEXTQSCB = %d\n", ahc_inb(ahc, NEXT_QUEUED_SCB));
7240         /* QINFIFO */
7241         printf("QINFIFO entries: ");
7242         if ((ahc->features & AHC_QUEUE_REGS) != 0) {
7243                 qinpos = ahc_inb(ahc, SNSCB_QOFF);
7244                 ahc_outb(ahc, SNSCB_QOFF, qinpos);
7245         } else
7246                 qinpos = ahc_inb(ahc, QINPOS);
7247         qintail = ahc->qinfifonext;
7248         while (qinpos != qintail) {
7249                 printf("%d ", ahc->qinfifo[qinpos]);
7250                 qinpos++;
7251         }
7252         printf("\n");
7253
7254         printf("Waiting Queue entries: ");
7255         scb_index = ahc_inb(ahc, WAITING_SCBH);
7256         i = 0;
7257         while (scb_index != SCB_LIST_NULL && i++ < 256) {
7258                 ahc_outb(ahc, SCBPTR, scb_index);
7259                 printf("%d:%d ", scb_index, ahc_inb(ahc, SCB_TAG));
7260                 scb_index = ahc_inb(ahc, SCB_NEXT);
7261         }
7262         printf("\n");
7263
7264         printf("Disconnected Queue entries: ");
7265         scb_index = ahc_inb(ahc, DISCONNECTED_SCBH);
7266         i = 0;
7267         while (scb_index != SCB_LIST_NULL && i++ < 256) {
7268                 ahc_outb(ahc, SCBPTR, scb_index);
7269                 printf("%d:%d ", scb_index, ahc_inb(ahc, SCB_TAG));
7270                 scb_index = ahc_inb(ahc, SCB_NEXT);
7271         }
7272         printf("\n");
7273
7274         ahc_sync_qoutfifo(ahc, BUS_DMASYNC_POSTREAD);
7275         printf("QOUTFIFO entries: ");
7276         qoutpos = ahc->qoutfifonext;
7277         i = 0;
7278         while (ahc->qoutfifo[qoutpos] != SCB_LIST_NULL && i++ < 256) {
7279                 printf("%d ", ahc->qoutfifo[qoutpos]);
7280                 qoutpos++;
7281         }
7282         printf("\n");
7283
7284         printf("Sequencer Free SCB List: ");
7285         scb_index = ahc_inb(ahc, FREE_SCBH);
7286         i = 0;
7287         while (scb_index != SCB_LIST_NULL && i++ < 256) {
7288                 ahc_outb(ahc, SCBPTR, scb_index);
7289                 printf("%d ", scb_index);
7290                 scb_index = ahc_inb(ahc, SCB_NEXT);
7291         }
7292         printf("\n");
7293
7294         printf("Sequencer SCB Info: ");
7295         for (i = 0; i < ahc->scb_data->maxhscbs; i++) {
7296                 ahc_outb(ahc, SCBPTR, i);
7297                 cur_col = printf("\n%3d ", i);
7298
7299                 ahc_scb_control_print(ahc_inb(ahc, SCB_CONTROL), &cur_col, 60);
7300                 ahc_scb_scsiid_print(ahc_inb(ahc, SCB_SCSIID), &cur_col, 60);
7301                 ahc_scb_lun_print(ahc_inb(ahc, SCB_LUN), &cur_col, 60);
7302                 ahc_scb_tag_print(ahc_inb(ahc, SCB_TAG), &cur_col, 60);
7303         }
7304         printf("\n");
7305
7306         printf("Pending list: ");
7307         i = 0;
7308         LIST_FOREACH(scb, &ahc->pending_scbs, pending_links) {
7309                 if (i++ > 256)
7310                         break;
7311                 cur_col = printf("\n%3d ", scb->hscb->tag);
7312                 ahc_scb_control_print(scb->hscb->control, &cur_col, 60);
7313                 ahc_scb_scsiid_print(scb->hscb->scsiid, &cur_col, 60);
7314                 ahc_scb_lun_print(scb->hscb->lun, &cur_col, 60);
7315                 if ((ahc->flags & AHC_PAGESCBS) == 0) {
7316                         ahc_outb(ahc, SCBPTR, scb->hscb->tag);
7317                         printf("(");
7318                         ahc_scb_control_print(ahc_inb(ahc, SCB_CONTROL),
7319                                               &cur_col, 60);
7320                         ahc_scb_tag_print(ahc_inb(ahc, SCB_TAG), &cur_col, 60);
7321                         printf(")");
7322                 }
7323         }
7324         printf("\n");
7325
7326         printf("Kernel Free SCB list: ");
7327         i = 0;
7328         SLIST_FOREACH(scb, &ahc->scb_data->free_scbs, links.sle) {
7329                 if (i++ > 256)
7330                         break;
7331                 printf("%d ", scb->hscb->tag);
7332         }
7333         printf("\n");
7334
7335         maxtarget = (ahc->features & (AHC_WIDE|AHC_TWIN)) ? 15 : 7;
7336         for (target = 0; target <= maxtarget; target++) {
7337                 untagged_q = &ahc->untagged_queues[target];
7338                 if (TAILQ_FIRST(untagged_q) == NULL)
7339                         continue;
7340                 printf("Untagged Q(%d): ", target);
7341                 i = 0;
7342                 TAILQ_FOREACH(scb, untagged_q, links.tqe) {
7343                         if (i++ > 256)
7344                                 break;
7345                         printf("%d ", scb->hscb->tag);
7346                 }
7347                 printf("\n");
7348         }
7349
7350         ahc_platform_dump_card_state(ahc);
7351         printf("\n<<<<<<<<<<<<<<<<< Dump Card State Ends >>>>>>>>>>>>>>>>>>\n");
7352         ahc_outb(ahc, SCBPTR, saved_scbptr);
7353         if (paused == 0)
7354                 ahc_unpause(ahc);
7355 }
7356
7357 /************************* Target Mode ****************************************/
7358 #ifdef AHC_TARGET_MODE
7359 cam_status
7360 ahc_find_tmode_devs(struct ahc_softc *ahc, struct cam_sim *sim, union ccb *ccb,
7361                     struct ahc_tmode_tstate **tstate,
7362                     struct ahc_tmode_lstate **lstate,
7363                     int notfound_failure)
7364 {
7365
7366         if ((ahc->features & AHC_TARGETMODE) == 0)
7367                 return (CAM_REQ_INVALID);
7368
7369         /*
7370          * Handle the 'black hole' device that sucks up
7371          * requests to unattached luns on enabled targets.
7372          */
7373         if (ccb->ccb_h.target_id == CAM_TARGET_WILDCARD
7374          && ccb->ccb_h.target_lun == CAM_LUN_WILDCARD) {
7375                 *tstate = NULL;
7376                 *lstate = ahc->black_hole;
7377         } else {
7378                 u_int max_id;
7379
7380                 max_id = (ahc->features & AHC_WIDE) ? 16 : 8;
7381                 if (ccb->ccb_h.target_id >= max_id)
7382                         return (CAM_TID_INVALID);
7383
7384                 if (ccb->ccb_h.target_lun >= AHC_NUM_LUNS)
7385                         return (CAM_LUN_INVALID);
7386
7387                 *tstate = ahc->enabled_targets[ccb->ccb_h.target_id];
7388                 *lstate = NULL;
7389                 if (*tstate != NULL)
7390                         *lstate =
7391                             (*tstate)->enabled_luns[ccb->ccb_h.target_lun];
7392         }
7393
7394         if (notfound_failure != 0 && *lstate == NULL)
7395                 return (CAM_PATH_INVALID);
7396
7397         return (CAM_REQ_CMP);
7398 }
7399
7400 void
7401 ahc_handle_en_lun(struct ahc_softc *ahc, struct cam_sim *sim, union ccb *ccb)
7402 {
7403         struct     ahc_tmode_tstate *tstate;
7404         struct     ahc_tmode_lstate *lstate;
7405         struct     ccb_en_lun *cel;
7406         cam_status status;
7407         u_long     s;
7408         u_int      target;
7409         u_int      lun;
7410         u_int      target_mask;
7411         u_int      our_id;
7412         int        error;
7413         char       channel;
7414
7415         status = ahc_find_tmode_devs(ahc, sim, ccb, &tstate, &lstate,
7416                                      /*notfound_failure*/FALSE);
7417
7418         if (status != CAM_REQ_CMP) {
7419                 ccb->ccb_h.status = status;
7420                 return;
7421         }
7422
7423         if (cam_sim_bus(sim) == 0)
7424                 our_id = ahc->our_id;
7425         else
7426                 our_id = ahc->our_id_b;
7427
7428         if (ccb->ccb_h.target_id != our_id) {
7429                 /*
7430                  * our_id represents our initiator ID, or
7431                  * the ID of the first target to have an
7432                  * enabled lun in target mode.  There are
7433                  * two cases that may preclude enabling a
7434                  * target id other than our_id.
7435                  *
7436                  *   o our_id is for an active initiator role.
7437                  *     Since the hardware does not support
7438                  *     reselections to the initiator role at
7439                  *     anything other than our_id, and our_id
7440                  *     is used by the hardware to indicate the
7441                  *     ID to use for both select-out and
7442                  *     reselect-out operations, the only target
7443                  *     ID we can support in this mode is our_id.
7444                  *
7445                  *   o The MULTARGID feature is not available and
7446                  *     a previous target mode ID has been enabled.
7447                  */
7448                 if ((ahc->features & AHC_MULTIROLE) != 0) {
7449
7450                         if ((ahc->features & AHC_MULTI_TID) != 0
7451                          && (ahc->flags & AHC_INITIATORROLE) != 0) {
7452                                 /*
7453                                  * Only allow additional targets if
7454                                  * the initiator role is disabled.
7455                                  * The hardware cannot handle a re-select-in
7456                                  * on the initiator id during a re-select-out
7457                                  * on a different target id.
7458                                  */
7459                                 status = CAM_TID_INVALID;
7460                         } else if ((ahc->flags & AHC_INITIATORROLE) != 0
7461                                 || ahc->enabled_luns > 0) {
7462                                 /*
7463                                  * Only allow our target id to change
7464                                  * if the initiator role is not configured
7465                                  * and there are no enabled luns which
7466                                  * are attached to the currently registered
7467                                  * scsi id.
7468                                  */
7469                                 status = CAM_TID_INVALID;
7470                         }
7471                 } else if ((ahc->features & AHC_MULTI_TID) == 0
7472                         && ahc->enabled_luns > 0) {
7473
7474                         status = CAM_TID_INVALID;
7475                 }
7476         }
7477
7478         if (status != CAM_REQ_CMP) {
7479                 ccb->ccb_h.status = status;
7480                 return;
7481         }
7482
7483         /*
7484          * We now have an id that is valid.
7485          * If we aren't in target mode, switch modes.
7486          */
7487         if ((ahc->flags & AHC_TARGETROLE) == 0
7488          && ccb->ccb_h.target_id != CAM_TARGET_WILDCARD) {
7489                 u_long   s;
7490                 ahc_flag saved_flags;
7491
7492                 printf("Configuring Target Mode\n");
7493                 ahc_lock(ahc, &s);
7494                 if (LIST_FIRST(&ahc->pending_scbs) != NULL) {
7495                         ccb->ccb_h.status = CAM_BUSY;
7496                         ahc_unlock(ahc, &s);
7497                         return;
7498                 }
7499                 saved_flags = ahc->flags;
7500                 ahc->flags |= AHC_TARGETROLE;
7501                 if ((ahc->features & AHC_MULTIROLE) == 0)
7502                         ahc->flags &= ~AHC_INITIATORROLE;
7503                 ahc_pause(ahc);
7504                 error = ahc_loadseq(ahc);
7505                 if (error != 0) {
7506                         /*
7507                          * Restore original configuration and notify
7508                          * the caller that we cannot support target mode.
7509                          * Since the adapter started out in this
7510                          * configuration, the firmware load will succeed,
7511                          * so there is no point in checking ahc_loadseq's
7512                          * return value.
7513                          */
7514                         ahc->flags = saved_flags;
7515                         (void)ahc_loadseq(ahc);
7516                         ahc_restart(ahc);
7517                         ahc_unlock(ahc, &s);
7518                         ccb->ccb_h.status = CAM_FUNC_NOTAVAIL;
7519                         return;
7520                 }
7521                 ahc_restart(ahc);
7522                 ahc_unlock(ahc, &s);
7523         }
7524         cel = &ccb->cel;
7525         target = ccb->ccb_h.target_id;
7526         lun = ccb->ccb_h.target_lun;
7527         channel = SIM_CHANNEL(ahc, sim);
7528         target_mask = 0x01 << target;
7529         if (channel == 'B')
7530                 target_mask <<= 8;
7531
7532         if (cel->enable != 0) {
7533                 u_int scsiseq;
7534
7535                 /* Are we already enabled?? */
7536                 if (lstate != NULL) {
7537                         xpt_print_path(ccb->ccb_h.path);
7538                         printf("Lun already enabled\n");
7539                         ccb->ccb_h.status = CAM_LUN_ALRDY_ENA;
7540                         return;
7541                 }
7542
7543                 if (cel->grp6_len != 0
7544                  || cel->grp7_len != 0) {
7545                         /*
7546                          * Don't (yet?) support vendor
7547                          * specific commands.
7548                          */
7549                         ccb->ccb_h.status = CAM_REQ_INVALID;
7550                         printf("Non-zero Group Codes\n");
7551                         return;
7552                 }
7553
7554                 /*
7555                  * Seems to be okay.
7556                  * Setup our data structures.
7557                  */
7558                 if (target != CAM_TARGET_WILDCARD && tstate == NULL) {
7559                         tstate = ahc_alloc_tstate(ahc, target, channel);
7560                         if (tstate == NULL) {
7561                                 xpt_print_path(ccb->ccb_h.path);
7562                                 printf("Couldn't allocate tstate\n");
7563                                 ccb->ccb_h.status = CAM_RESRC_UNAVAIL;
7564                                 return;
7565                         }
7566                 }
7567                 lstate = malloc(sizeof(*lstate), M_DEVBUF, M_NOWAIT);
7568                 if (lstate == NULL) {
7569                         xpt_print_path(ccb->ccb_h.path);
7570                         printf("Couldn't allocate lstate\n");
7571                         ccb->ccb_h.status = CAM_RESRC_UNAVAIL;
7572                         return;
7573                 }
7574                 memset(lstate, 0, sizeof(*lstate));
7575                 status = xpt_create_path(&lstate->path, /*periph*/NULL,
7576                                          xpt_path_path_id(ccb->ccb_h.path),
7577                                          xpt_path_target_id(ccb->ccb_h.path),
7578                                          xpt_path_lun_id(ccb->ccb_h.path));
7579                 if (status != CAM_REQ_CMP) {
7580                         free(lstate, M_DEVBUF);
7581                         xpt_print_path(ccb->ccb_h.path);
7582                         printf("Couldn't allocate path\n");
7583                         ccb->ccb_h.status = CAM_RESRC_UNAVAIL;
7584                         return;
7585                 }
7586                 SLIST_INIT(&lstate->accept_tios);
7587                 SLIST_INIT(&lstate->immed_notifies);
7588                 ahc_lock(ahc, &s);
7589                 ahc_pause(ahc);
7590                 if (target != CAM_TARGET_WILDCARD) {
7591                         tstate->enabled_luns[lun] = lstate;
7592                         ahc->enabled_luns++;
7593
7594                         if ((ahc->features & AHC_MULTI_TID) != 0) {
7595                                 u_int targid_mask;
7596
7597                                 targid_mask = ahc_inb(ahc, TARGID)
7598                                             | (ahc_inb(ahc, TARGID + 1) << 8);
7599
7600                                 targid_mask |= target_mask;
7601                                 ahc_outb(ahc, TARGID, targid_mask);
7602                                 ahc_outb(ahc, TARGID+1, (targid_mask >> 8));
7603
7604                                 ahc_update_scsiid(ahc, targid_mask);
7605                         } else {
7606                                 u_int our_id;
7607                                 char  channel;
7608
7609                                 channel = SIM_CHANNEL(ahc, sim);
7610                                 our_id = SIM_SCSI_ID(ahc, sim);
7611
7612                                 /*
7613                                  * This can only happen if selections
7614                                  * are not enabled
7615                                  */
7616                                 if (target != our_id) {
7617                                         u_int sblkctl;
7618                                         char  cur_channel;
7619                                         int   swap;
7620
7621                                         sblkctl = ahc_inb(ahc, SBLKCTL);
7622                                         cur_channel = (sblkctl & SELBUSB)
7623                                                     ? 'B' : 'A';
7624                                         if ((ahc->features & AHC_TWIN) == 0)
7625                                                 cur_channel = 'A';
7626                                         swap = cur_channel != channel;
7627                                         if (channel == 'A')
7628                                                 ahc->our_id = target;
7629                                         else
7630                                                 ahc->our_id_b = target;
7631
7632                                         if (swap)
7633                                                 ahc_outb(ahc, SBLKCTL,
7634                                                          sblkctl ^ SELBUSB);
7635
7636                                         ahc_outb(ahc, SCSIID, target);
7637
7638                                         if (swap)
7639                                                 ahc_outb(ahc, SBLKCTL, sblkctl);
7640                                 }
7641                         }
7642                 } else
7643                         ahc->black_hole = lstate;
7644                 /* Allow select-in operations */
7645                 if (ahc->black_hole != NULL && ahc->enabled_luns > 0) {
7646                         scsiseq = ahc_inb(ahc, SCSISEQ_TEMPLATE);
7647                         scsiseq |= ENSELI;
7648                         ahc_outb(ahc, SCSISEQ_TEMPLATE, scsiseq);
7649                         scsiseq = ahc_inb(ahc, SCSISEQ);
7650                         scsiseq |= ENSELI;
7651                         ahc_outb(ahc, SCSISEQ, scsiseq);
7652                 }
7653                 ahc_unpause(ahc);
7654                 ahc_unlock(ahc, &s);
7655                 ccb->ccb_h.status = CAM_REQ_CMP;
7656                 xpt_print_path(ccb->ccb_h.path);
7657                 printf("Lun now enabled for target mode\n");
7658         } else {
7659                 struct scb *scb;
7660                 int i, empty;
7661
7662                 if (lstate == NULL) {
7663                         ccb->ccb_h.status = CAM_LUN_INVALID;
7664                         return;
7665                 }
7666
7667                 ahc_lock(ahc, &s);
7668
7669                 ccb->ccb_h.status = CAM_REQ_CMP;
7670                 LIST_FOREACH(scb, &ahc->pending_scbs, pending_links) {
7671                         struct ccb_hdr *ccbh;
7672
7673                         ccbh = &scb->io_ctx->ccb_h;
7674                         if (ccbh->func_code == XPT_CONT_TARGET_IO
7675                          && !xpt_path_comp(ccbh->path, ccb->ccb_h.path)){
7676                                 printf("CTIO pending\n");
7677                                 ccb->ccb_h.status = CAM_REQ_INVALID;
7678                                 ahc_unlock(ahc, &s);
7679                                 return;
7680                         }
7681                 }
7682
7683                 if (SLIST_FIRST(&lstate->accept_tios) != NULL) {
7684                         printf("ATIOs pending\n");
7685                         ccb->ccb_h.status = CAM_REQ_INVALID;
7686                 }
7687
7688                 if (SLIST_FIRST(&lstate->immed_notifies) != NULL) {
7689                         printf("INOTs pending\n");
7690                         ccb->ccb_h.status = CAM_REQ_INVALID;
7691                 }
7692
7693                 if (ccb->ccb_h.status != CAM_REQ_CMP) {
7694                         ahc_unlock(ahc, &s);
7695                         return;
7696                 }
7697
7698                 xpt_print_path(ccb->ccb_h.path);
7699                 printf("Target mode disabled\n");
7700                 xpt_free_path(lstate->path);
7701                 free(lstate, M_DEVBUF);
7702
7703                 ahc_pause(ahc);
7704                 /* Can we clean up the target too? */
7705                 if (target != CAM_TARGET_WILDCARD) {
7706                         tstate->enabled_luns[lun] = NULL;
7707                         ahc->enabled_luns--;
7708                         for (empty = 1, i = 0; i < 8; i++)
7709                                 if (tstate->enabled_luns[i] != NULL) {
7710                                         empty = 0;
7711                                         break;
7712                                 }
7713
7714                         if (empty) {
7715                                 ahc_free_tstate(ahc, target, channel,
7716                                                 /*force*/FALSE);
7717                                 if (ahc->features & AHC_MULTI_TID) {
7718                                         u_int targid_mask;
7719
7720                                         targid_mask = ahc_inb(ahc, TARGID)
7721                                                     | (ahc_inb(ahc, TARGID + 1)
7722                                                        << 8);
7723
7724                                         targid_mask &= ~target_mask;
7725                                         ahc_outb(ahc, TARGID, targid_mask);
7726                                         ahc_outb(ahc, TARGID+1,
7727                                                  (targid_mask >> 8));
7728                                         ahc_update_scsiid(ahc, targid_mask);
7729                                 }
7730                         }
7731                 } else {
7732
7733                         ahc->black_hole = NULL;
7734
7735                         /*
7736                          * We can't allow selections without
7737                          * our black hole device.
7738                          */
7739                         empty = TRUE;
7740                 }
7741                 if (ahc->enabled_luns == 0) {
7742                         /* Disallow select-in */
7743                         u_int scsiseq;
7744
7745                         scsiseq = ahc_inb(ahc, SCSISEQ_TEMPLATE);
7746                         scsiseq &= ~ENSELI;
7747                         ahc_outb(ahc, SCSISEQ_TEMPLATE, scsiseq);
7748                         scsiseq = ahc_inb(ahc, SCSISEQ);
7749                         scsiseq &= ~ENSELI;
7750                         ahc_outb(ahc, SCSISEQ, scsiseq);
7751
7752                         if ((ahc->features & AHC_MULTIROLE) == 0) {
7753                                 printf("Configuring Initiator Mode\n");
7754                                 ahc->flags &= ~AHC_TARGETROLE;
7755                                 ahc->flags |= AHC_INITIATORROLE;
7756                                 /*
7757                                  * Returning to a configuration that
7758                                  * fit previously will always succeed.
7759                                  */
7760                                 (void)ahc_loadseq(ahc);
7761                                 ahc_restart(ahc);
7762                                 /*
7763                                  * Unpaused.  The extra unpause
7764                                  * that follows is harmless.
7765                                  */
7766                         }
7767                 }
7768                 ahc_unpause(ahc);
7769                 ahc_unlock(ahc, &s);
7770         }
7771 }
7772
7773 static void
7774 ahc_update_scsiid(struct ahc_softc *ahc, u_int targid_mask)
7775 {
7776         u_int scsiid_mask;
7777         u_int scsiid;
7778
7779         if ((ahc->features & AHC_MULTI_TID) == 0)
7780                 panic("ahc_update_scsiid called on non-multitid unit\n");
7781
7782         /*
7783          * Since we will rely on the TARGID mask
7784          * for selection enables, ensure that OID
7785          * in SCSIID is not set to some other ID
7786          * that we don't want to allow selections on.
7787          */
7788         if ((ahc->features & AHC_ULTRA2) != 0)
7789                 scsiid = ahc_inb(ahc, SCSIID_ULTRA2);
7790         else
7791                 scsiid = ahc_inb(ahc, SCSIID);
7792         scsiid_mask = 0x1 << (scsiid & OID);
7793         if ((targid_mask & scsiid_mask) == 0) {
7794                 u_int our_id;
7795
7796                 /* ffs counts from 1 */
7797                 our_id = ffs(targid_mask);
7798                 if (our_id == 0)
7799                         our_id = ahc->our_id;
7800                 else
7801                         our_id--;
7802                 scsiid &= TID;
7803                 scsiid |= our_id;
7804         }
7805         if ((ahc->features & AHC_ULTRA2) != 0)
7806                 ahc_outb(ahc, SCSIID_ULTRA2, scsiid);
7807         else
7808                 ahc_outb(ahc, SCSIID, scsiid);
7809 }
7810
7811 static void
7812 ahc_run_tqinfifo(struct ahc_softc *ahc, int paused)
7813 {
7814         struct target_cmd *cmd;
7815
7816         /*
7817          * If the card supports auto-access pause,
7818          * we can access the card directly regardless
7819          * of whether it is paused or not.
7820          */
7821         if ((ahc->features & AHC_AUTOPAUSE) != 0)
7822                 paused = TRUE;
7823
7824         ahc_sync_tqinfifo(ahc, BUS_DMASYNC_POSTREAD);
7825         while ((cmd = &ahc->targetcmds[ahc->tqinfifonext])->cmd_valid != 0) {
7826
7827                 /*
7828                  * Only advance through the queue if we
7829                  * have the resources to process the command.
7830                  */
7831                 if (ahc_handle_target_cmd(ahc, cmd) != 0)
7832                         break;
7833
7834                 cmd->cmd_valid = 0;
7835                 ahc_dmamap_sync(ahc, ahc->shared_data_dmat,
7836                                 ahc->shared_data_dmamap,
7837                                 ahc_targetcmd_offset(ahc, ahc->tqinfifonext),
7838                                 sizeof(struct target_cmd),
7839                                 BUS_DMASYNC_PREREAD);
7840                 ahc->tqinfifonext++;
7841
7842                 /*
7843                  * Lazily update our position in the target mode incoming
7844                  * command queue as seen by the sequencer.
7845                  */
7846                 if ((ahc->tqinfifonext & (HOST_TQINPOS - 1)) == 1) {
7847                         if ((ahc->features & AHC_HS_MAILBOX) != 0) {
7848                                 u_int hs_mailbox;
7849
7850                                 hs_mailbox = ahc_inb(ahc, HS_MAILBOX);
7851                                 hs_mailbox &= ~HOST_TQINPOS;
7852                                 hs_mailbox |= ahc->tqinfifonext & HOST_TQINPOS;
7853                                 ahc_outb(ahc, HS_MAILBOX, hs_mailbox);
7854                         } else {
7855                                 if (!paused)
7856                                         ahc_pause(ahc);
7857                                 ahc_outb(ahc, KERNEL_TQINPOS,
7858                                          ahc->tqinfifonext & HOST_TQINPOS);
7859                                 if (!paused)
7860                                         ahc_unpause(ahc);
7861                         }
7862                 }
7863         }
7864 }
7865
7866 static int
7867 ahc_handle_target_cmd(struct ahc_softc *ahc, struct target_cmd *cmd)
7868 {
7869         struct    ahc_tmode_tstate *tstate;
7870         struct    ahc_tmode_lstate *lstate;
7871         struct    ccb_accept_tio *atio;
7872         uint8_t *byte;
7873         int       initiator;
7874         int       target;
7875         int       lun;
7876
7877         initiator = SCSIID_TARGET(ahc, cmd->scsiid);
7878         target = SCSIID_OUR_ID(cmd->scsiid);
7879         lun    = (cmd->identify & MSG_IDENTIFY_LUNMASK);
7880
7881         byte = cmd->bytes;
7882         tstate = ahc->enabled_targets[target];
7883         lstate = NULL;
7884         if (tstate != NULL)
7885                 lstate = tstate->enabled_luns[lun];
7886
7887         /*
7888          * Commands for disabled luns go to the black hole driver.
7889          */
7890         if (lstate == NULL)
7891                 lstate = ahc->black_hole;
7892
7893         atio = (struct ccb_accept_tio*)SLIST_FIRST(&lstate->accept_tios);
7894         if (atio == NULL) {
7895                 ahc->flags |= AHC_TQINFIFO_BLOCKED;
7896                 /*
7897                  * Wait for more ATIOs from the peripheral driver for this lun.
7898                  */
7899                 if (bootverbose)
7900                         printf("%s: ATIOs exhausted\n", ahc_name(ahc));
7901                 return (1);
7902         } else
7903                 ahc->flags &= ~AHC_TQINFIFO_BLOCKED;
7904 #if 0
7905         printf("Incoming command from %d for %d:%d%s\n",
7906                initiator, target, lun,
7907                lstate == ahc->black_hole ? "(Black Holed)" : "");
7908 #endif
7909         SLIST_REMOVE_HEAD(&lstate->accept_tios, sim_links.sle);
7910
7911         if (lstate == ahc->black_hole) {
7912                 /* Fill in the wildcards */
7913                 atio->ccb_h.target_id = target;
7914                 atio->ccb_h.target_lun = lun;
7915         }
7916
7917         /*
7918          * Package it up and send it off to
7919          * whomever has this lun enabled.
7920          */
7921         atio->sense_len = 0;
7922         atio->init_id = initiator;
7923         if (byte[0] != 0xFF) {
7924                 /* Tag was included */
7925                 atio->tag_action = *byte++;
7926                 atio->tag_id = *byte++;
7927                 atio->ccb_h.flags = CAM_TAG_ACTION_VALID;
7928         } else {
7929                 atio->ccb_h.flags = 0;
7930         }
7931         byte++;
7932
7933         /* Okay.  Now determine the cdb size based on the command code */
7934         switch (*byte >> CMD_GROUP_CODE_SHIFT) {
7935         case 0:
7936                 atio->cdb_len = 6;
7937                 break;
7938         case 1:
7939         case 2:
7940                 atio->cdb_len = 10;
7941                 break;
7942         case 4:
7943                 atio->cdb_len = 16;
7944                 break;
7945         case 5:
7946                 atio->cdb_len = 12;
7947                 break;
7948         case 3:
7949         default:
7950                 /* Only copy the opcode. */
7951                 atio->cdb_len = 1;
7952                 printf("Reserved or VU command code type encountered\n");
7953                 break;
7954         }
7955
7956         memcpy(atio->cdb_io.cdb_bytes, byte, atio->cdb_len);
7957
7958         atio->ccb_h.status |= CAM_CDB_RECVD;
7959
7960         if ((cmd->identify & MSG_IDENTIFY_DISCFLAG) == 0) {
7961                 /*
7962                  * We weren't allowed to disconnect.
7963                  * We're hanging on the bus until a
7964                  * continue target I/O comes in response
7965                  * to this accept tio.
7966                  */
7967 #if 0
7968                 printf("Received Immediate Command %d:%d:%d - %p\n",
7969                        initiator, target, lun, ahc->pending_device);
7970 #endif
7971                 ahc->pending_device = lstate;
7972                 ahc_freeze_ccb((union ccb *)atio);
7973                 atio->ccb_h.flags |= CAM_DIS_DISCONNECT;
7974         }
7975         xpt_done((union ccb*)atio);
7976         return (0);
7977 }
7978
7979 #endif