git.oblomov.eu Git - linux-2.6/blob - arch/arm/plat-omap/dma.c

   1 /*
   2  * linux/arch/arm/plat-omap/dma.c
   3  *
   4  * Copyright (C) 2003 - 2008 Nokia Corporation
   5  * Author: Juha Yrjölä <juha.yrjola@nokia.com>
   6  * DMA channel linking for 1610 by Samuel Ortiz <samuel.ortiz@nokia.com>
   7  * Graphics DMA and LCD DMA graphics tranformations
   8  * by Imre Deak <imre.deak@nokia.com>
   9  * OMAP2/3 support Copyright (C) 2004-2007 Texas Instruments, Inc.
  10  * Merged to support both OMAP1 and OMAP2 by Tony Lindgren <tony@atomide.com>
  11  * Some functions based on earlier dma-omap.c Copyright (C) 2001 RidgeRun, Inc.
  12  *
  13  * Support functions for the OMAP internal DMA channels.
  14  *
  15  * This program is free software; you can redistribute it and/or modify
  16  * it under the terms of the GNU General Public License version 2 as
  17  * published by the Free Software Foundation.
  18  *
  19  */
  20
  21 #include <linux/module.h>
  22 #include <linux/init.h>
  23 #include <linux/sched.h>
  24 #include <linux/spinlock.h>
  25 #include <linux/errno.h>
  26 #include <linux/interrupt.h>
  27 #include <linux/irq.h>
  28 #include <linux/io.h>
  29
  30 #include <asm/system.h>
  31 #include <mach/hardware.h>
  32 #include <mach/dma.h>
  33
  34 #include <mach/tc.h>
  35
  36 #undef DEBUG
  37
  38 #ifndef CONFIG_ARCH_OMAP1
  39 enum { DMA_CH_ALLOC_DONE, DMA_CH_PARAMS_SET_DONE, DMA_CH_STARTED,
  40         DMA_CH_QUEUED, DMA_CH_NOTSTARTED, DMA_CH_PAUSED, DMA_CH_LINK_ENABLED
  41 };
  42
  43 enum { DMA_CHAIN_STARTED, DMA_CHAIN_NOTSTARTED };
  44 #endif
  45
  46 #define OMAP_DMA_ACTIVE                 0x01
  47 #define OMAP_DMA_CCR_EN                 (1 << 7)
  48 #define OMAP2_DMA_CSR_CLEAR_MASK        0xffe
  49
  50 #define OMAP_FUNC_MUX_ARM_BASE          (0xfffe1000 + 0xec)
  51
  52 static int enable_1510_mode;
  53
  54 struct omap_dma_lch {
  55         int next_lch;
  56         int dev_id;
  57         u16 saved_csr;
  58         u16 enabled_irqs;
  59         const char *dev_name;
  60         void (*callback)(int lch, u16 ch_status, void *data);
  61         void *data;
  62
  63 #ifndef CONFIG_ARCH_OMAP1
  64         /* required for Dynamic chaining */
  65         int prev_linked_ch;
  66         int next_linked_ch;
  67         int state;
  68         int chain_id;
  69
  70         int status;
  71 #endif
  72         long flags;
  73 };
  74
  75 struct dma_link_info {
  76         int *linked_dmach_q;
  77         int no_of_lchs_linked;
  78
  79         int q_count;
  80         int q_tail;
  81         int q_head;
  82
  83         int chain_state;
  84         int chain_mode;
  85
  86 };
  87
  88 static struct dma_link_info *dma_linked_lch;
  89
  90 #ifndef CONFIG_ARCH_OMAP1
  91
  92 /* Chain handling macros */
  93 #define OMAP_DMA_CHAIN_QINIT(chain_id)                                  \
  94         do {                                                            \
  95                 dma_linked_lch[chain_id].q_head =                       \
  96                 dma_linked_lch[chain_id].q_tail =                       \
  97                 dma_linked_lch[chain_id].q_count = 0;                   \
  98         } while (0)
  99 #define OMAP_DMA_CHAIN_QFULL(chain_id)                                  \
 100                 (dma_linked_lch[chain_id].no_of_lchs_linked ==          \
 101                 dma_linked_lch[chain_id].q_count)
 102 #define OMAP_DMA_CHAIN_QLAST(chain_id)                                  \
 103         do {                                                            \
 104                 ((dma_linked_lch[chain_id].no_of_lchs_linked-1) ==      \
 105                 dma_linked_lch[chain_id].q_count)                       \
 106         } while (0)
 107 #define OMAP_DMA_CHAIN_QEMPTY(chain_id)                                 \
 108                 (0 == dma_linked_lch[chain_id].q_count)
 109 #define __OMAP_DMA_CHAIN_INCQ(end)                                      \
 110         ((end) = ((end)+1) % dma_linked_lch[chain_id].no_of_lchs_linked)
 111 #define OMAP_DMA_CHAIN_INCQHEAD(chain_id)                               \
 112         do {                                                            \
 113                 __OMAP_DMA_CHAIN_INCQ(dma_linked_lch[chain_id].q_head); \
 114                 dma_linked_lch[chain_id].q_count--;                     \
 115         } while (0)
 116
 117 #define OMAP_DMA_CHAIN_INCQTAIL(chain_id)                               \
 118         do {                                                            \
 119                 __OMAP_DMA_CHAIN_INCQ(dma_linked_lch[chain_id].q_tail); \
 120                 dma_linked_lch[chain_id].q_count++; \
 121         } while (0)
 122 #endif
 123
 124 static int dma_lch_count;
 125 static int dma_chan_count;
 126
 127 static spinlock_t dma_chan_lock;
 128 static struct omap_dma_lch *dma_chan;
 129 static void __iomem *omap_dma_base;
 130
 131 static const u8 omap1_dma_irq[OMAP1_LOGICAL_DMA_CH_COUNT] = {
 132         INT_DMA_CH0_6, INT_DMA_CH1_7, INT_DMA_CH2_8, INT_DMA_CH3,
 133         INT_DMA_CH4, INT_DMA_CH5, INT_1610_DMA_CH6, INT_1610_DMA_CH7,
 134         INT_1610_DMA_CH8, INT_1610_DMA_CH9, INT_1610_DMA_CH10,
 135         INT_1610_DMA_CH11, INT_1610_DMA_CH12, INT_1610_DMA_CH13,
 136         INT_1610_DMA_CH14, INT_1610_DMA_CH15, INT_DMA_LCD
 137 };
 138
 139 static inline void disable_lnk(int lch);
 140 static void omap_disable_channel_irq(int lch);
 141 static inline void omap_enable_channel_irq(int lch);
 142
 143 #define REVISIT_24XX()          printk(KERN_ERR "FIXME: no %s on 24xx\n", \
 144                                                 __func__);
 145
 146 #define dma_read(reg)                                                   \
 147 ({                                                                      \
 148         u32 __val;                                                      \
 149         if (cpu_class_is_omap1())                                       \
 150                 __val = __raw_readw(omap_dma_base + OMAP1_DMA_##reg);   \
 151         else                                                            \
 152                 __val = __raw_readl(omap_dma_base + OMAP_DMA4_##reg);   \
 153         __val;                                                          \
 154 })
 155
 156 #define dma_write(val, reg)                                             \
 157 ({                                                                      \
 158         if (cpu_class_is_omap1())                                       \
 159                 __raw_writew((u16)(val), omap_dma_base + OMAP1_DMA_##reg); \
 160         else                                                            \
 161                 __raw_writel((val), omap_dma_base + OMAP_DMA4_##reg);   \
 162 })
 163
 164 #ifdef CONFIG_ARCH_OMAP15XX
 165 /* Returns 1 if the DMA module is in OMAP1510-compatible mode, 0 otherwise */
 166 int omap_dma_in_1510_mode(void)
 167 {
 168         return enable_1510_mode;
 169 }
 170 #else
 171 #define omap_dma_in_1510_mode()         0
 172 #endif
 173
 174 #ifdef CONFIG_ARCH_OMAP1
 175 static inline int get_gdma_dev(int req)
 176 {
 177         u32 reg = OMAP_FUNC_MUX_ARM_BASE + ((req - 1) / 5) * 4;
 178         int shift = ((req - 1) % 5) * 6;
 179
 180         return ((omap_readl(reg) >> shift) & 0x3f) + 1;
 181 }
 182
 183 static inline void set_gdma_dev(int req, int dev)
 184 {
 185         u32 reg = OMAP_FUNC_MUX_ARM_BASE + ((req - 1) / 5) * 4;
 186         int shift = ((req - 1) % 5) * 6;
 187         u32 l;
 188
 189         l = omap_readl(reg);
 190         l &= ~(0x3f << shift);
 191         l |= (dev - 1) << shift;
 192         omap_writel(l, reg);
 193 }
 194 #else
 195 #define set_gdma_dev(req, dev)  do {} while (0)
 196 #endif
 197
 198 /* Omap1 only */
 199 static void clear_lch_regs(int lch)
 200 {
 201         int i;
 202         void __iomem *lch_base = omap_dma_base + OMAP1_DMA_CH_BASE(lch);
 203
 204         for (i = 0; i < 0x2c; i += 2)
 205                 __raw_writew(0, lch_base + i);
 206 }
 207
 208 void omap_set_dma_priority(int lch, int dst_port, int priority)
 209 {
 210         unsigned long reg;
 211         u32 l;
 212
 213         if (cpu_class_is_omap1()) {
 214                 switch (dst_port) {
 215                 case OMAP_DMA_PORT_OCP_T1:      /* FFFECC00 */
 216                         reg = OMAP_TC_OCPT1_PRIOR;
 217                         break;
 218                 case OMAP_DMA_PORT_OCP_T2:      /* FFFECCD0 */
 219                         reg = OMAP_TC_OCPT2_PRIOR;
 220                         break;
 221                 case OMAP_DMA_PORT_EMIFF:       /* FFFECC08 */
 222                         reg = OMAP_TC_EMIFF_PRIOR;
 223                         break;
 224                 case OMAP_DMA_PORT_EMIFS:       /* FFFECC04 */
 225                         reg = OMAP_TC_EMIFS_PRIOR;
 226                         break;
 227                 default:
 228                         BUG();
 229                         return;
 230                 }
 231                 l = omap_readl(reg);
 232                 l &= ~(0xf << 8);
 233                 l |= (priority & 0xf) << 8;
 234                 omap_writel(l, reg);
 235         }
 236
 237         if (cpu_class_is_omap2()) {
 238                 u32 ccr;
 239
 240                 ccr = dma_read(CCR(lch));
 241                 if (priority)
 242                         ccr |= (1 << 6);
 243                 else
 244                         ccr &= ~(1 << 6);
 245                 dma_write(ccr, CCR(lch));
 246         }
 247 }
 248 EXPORT_SYMBOL(omap_set_dma_priority);
 249
 250 void omap_set_dma_transfer_params(int lch, int data_type, int elem_count,
 251                                   int frame_count, int sync_mode,
 252                                   int dma_trigger, int src_or_dst_synch)
 253 {
 254         u32 l;
 255
 256         l = dma_read(CSDP(lch));
 257         l &= ~0x03;
 258         l |= data_type;
 259         dma_write(l, CSDP(lch));
 260
 261         if (cpu_class_is_omap1()) {
 262                 u16 ccr;
 263
 264                 ccr = dma_read(CCR(lch));
 265                 ccr &= ~(1 << 5);
 266                 if (sync_mode == OMAP_DMA_SYNC_FRAME)
 267                         ccr |= 1 << 5;
 268                 dma_write(ccr, CCR(lch));
 269
 270                 ccr = dma_read(CCR2(lch));
 271                 ccr &= ~(1 << 2);
 272                 if (sync_mode == OMAP_DMA_SYNC_BLOCK)
 273                         ccr |= 1 << 2;
 274                 dma_write(ccr, CCR2(lch));
 275         }
 276
 277         if (cpu_class_is_omap2() && dma_trigger) {
 278                 u32 val;
 279
 280                 val = dma_read(CCR(lch));
 281
 282                 /* DMA_SYNCHRO_CONTROL_UPPER depends on the channel number */
 283                 val &= ~((3 << 19) | 0x1f);
 284                 val |= (dma_trigger & ~0x1f) << 14;
 285                 val |= dma_trigger & 0x1f;
 286
 287                 if (sync_mode & OMAP_DMA_SYNC_FRAME)
 288                         val |= 1 << 5;
 289                 else
 290                         val &= ~(1 << 5);
 291
 292                 if (sync_mode & OMAP_DMA_SYNC_BLOCK)
 293                         val |= 1 << 18;
 294                 else
 295                         val &= ~(1 << 18);
 296
 297                 if (src_or_dst_synch)
 298                         val |= 1 << 24;         /* source synch */
 299                 else
 300                         val &= ~(1 << 24);      /* dest synch */
 301
 302                 dma_write(val, CCR(lch));
 303         }
 304
 305         dma_write(elem_count, CEN(lch));
 306         dma_write(frame_count, CFN(lch));
 307 }
 308 EXPORT_SYMBOL(omap_set_dma_transfer_params);
 309
 310 void omap_set_dma_color_mode(int lch, enum omap_dma_color_mode mode, u32 color)
 311 {
 312         u16 w;
 313
 314         BUG_ON(omap_dma_in_1510_mode());
 315
 316         if (cpu_class_is_omap2()) {
 317                 REVISIT_24XX();
 318                 return;
 319         }
 320
 321         w = dma_read(CCR2(lch));
 322         w &= ~0x03;
 323
 324         switch (mode) {
 325         case OMAP_DMA_CONSTANT_FILL:
 326                 w |= 0x01;
 327                 break;
 328         case OMAP_DMA_TRANSPARENT_COPY:
 329                 w |= 0x02;
 330                 break;
 331         case OMAP_DMA_COLOR_DIS:
 332                 break;
 333         default:
 334                 BUG();
 335         }
 336         dma_write(w, CCR2(lch));
 337
 338         w = dma_read(LCH_CTRL(lch));
 339         w &= ~0x0f;
 340         /* Default is channel type 2D */
 341         if (mode) {
 342                 dma_write((u16)color, COLOR_L(lch));
 343                 dma_write((u16)(color >> 16), COLOR_U(lch));
 344                 w |= 1;         /* Channel type G */
 345         }
 346         dma_write(w, LCH_CTRL(lch));
 347 }
 348 EXPORT_SYMBOL(omap_set_dma_color_mode);
 349
 350 void omap_set_dma_write_mode(int lch, enum omap_dma_write_mode mode)
 351 {
 352         if (cpu_class_is_omap2()) {
 353                 u32 csdp;
 354
 355                 csdp = dma_read(CSDP(lch));
 356                 csdp &= ~(0x3 << 16);
 357                 csdp |= (mode << 16);
 358                 dma_write(csdp, CSDP(lch));
 359         }
 360 }
 361 EXPORT_SYMBOL(omap_set_dma_write_mode);
 362
 363 void omap_set_dma_channel_mode(int lch, enum omap_dma_channel_mode mode)
 364 {
 365         if (cpu_class_is_omap1() && !cpu_is_omap15xx()) {
 366                 u32 l;
 367
 368                 l = dma_read(LCH_CTRL(lch));
 369                 l &= ~0x7;
 370                 l |= mode;
 371                 dma_write(l, LCH_CTRL(lch));
 372         }
 373 }
 374 EXPORT_SYMBOL(omap_set_dma_channel_mode);
 375
 376 /* Note that src_port is only for omap1 */
 377 void omap_set_dma_src_params(int lch, int src_port, int src_amode,
 378                              unsigned long src_start,
 379                              int src_ei, int src_fi)
 380 {
 381         u32 l;
 382
 383         if (cpu_class_is_omap1()) {
 384                 u16 w;
 385
 386                 w = dma_read(CSDP(lch));
 387                 w &= ~(0x1f << 2);
 388                 w |= src_port << 2;
 389                 dma_write(w, CSDP(lch));
 390         }
 391
 392         l = dma_read(CCR(lch));
 393         l &= ~(0x03 << 12);
 394         l |= src_amode << 12;
 395         dma_write(l, CCR(lch));
 396
 397         if (cpu_class_is_omap1()) {
 398                 dma_write(src_start >> 16, CSSA_U(lch));
 399                 dma_write((u16)src_start, CSSA_L(lch));
 400         }
 401
 402         if (cpu_class_is_omap2())
 403                 dma_write(src_start, CSSA(lch));
 404
 405         dma_write(src_ei, CSEI(lch));
 406         dma_write(src_fi, CSFI(lch));
 407 }
 408 EXPORT_SYMBOL(omap_set_dma_src_params);
 409
 410 void omap_set_dma_params(int lch, struct omap_dma_channel_params *params)
 411 {
 412         omap_set_dma_transfer_params(lch, params->data_type,
 413                                      params->elem_count, params->frame_count,
 414                                      params->sync_mode, params->trigger,
 415                                      params->src_or_dst_synch);
 416         omap_set_dma_src_params(lch, params->src_port,
 417                                 params->src_amode, params->src_start,
 418                                 params->src_ei, params->src_fi);
 419
 420         omap_set_dma_dest_params(lch, params->dst_port,
 421                                  params->dst_amode, params->dst_start,
 422                                  params->dst_ei, params->dst_fi);
 423         if (params->read_prio || params->write_prio)
 424                 omap_dma_set_prio_lch(lch, params->read_prio,
 425                                       params->write_prio);
 426 }
 427 EXPORT_SYMBOL(omap_set_dma_params);
 428
 429 void omap_set_dma_src_index(int lch, int eidx, int fidx)
 430 {
 431         if (cpu_class_is_omap2())
 432                 return;
 433
 434         dma_write(eidx, CSEI(lch));
 435         dma_write(fidx, CSFI(lch));
 436 }
 437 EXPORT_SYMBOL(omap_set_dma_src_index);
 438
 439 void omap_set_dma_src_data_pack(int lch, int enable)
 440 {
 441         u32 l;
 442
 443         l = dma_read(CSDP(lch));
 444         l &= ~(1 << 6);
 445         if (enable)
 446                 l |= (1 << 6);
 447         dma_write(l, CSDP(lch));
 448 }
 449 EXPORT_SYMBOL(omap_set_dma_src_data_pack);
 450
 451 void omap_set_dma_src_burst_mode(int lch, enum omap_dma_burst_mode burst_mode)
 452 {
 453         unsigned int burst = 0;
 454         u32 l;
 455
 456         l = dma_read(CSDP(lch));
 457         l &= ~(0x03 << 7);
 458
 459         switch (burst_mode) {
 460         case OMAP_DMA_DATA_BURST_DIS:
 461                 break;
 462         case OMAP_DMA_DATA_BURST_4:
 463                 if (cpu_class_is_omap2())
 464                         burst = 0x1;
 465                 else
 466                         burst = 0x2;
 467                 break;
 468         case OMAP_DMA_DATA_BURST_8:
 469                 if (cpu_class_is_omap2()) {
 470                         burst = 0x2;
 471                         break;
 472                 }
 473                 /* not supported by current hardware on OMAP1
 474                  * w |= (0x03 << 7);
 475                  * fall through
 476                  */
 477         case OMAP_DMA_DATA_BURST_16:
 478                 if (cpu_class_is_omap2()) {
 479                         burst = 0x3;
 480                         break;
 481                 }
 482                 /* OMAP1 don't support burst 16
 483                  * fall through
 484                  */
 485         default:
 486                 BUG();
 487         }
 488
 489         l |= (burst << 7);
 490         dma_write(l, CSDP(lch));
 491 }
 492 EXPORT_SYMBOL(omap_set_dma_src_burst_mode);
 493
 494 /* Note that dest_port is only for OMAP1 */
 495 void omap_set_dma_dest_params(int lch, int dest_port, int dest_amode,
 496                               unsigned long dest_start,
 497                               int dst_ei, int dst_fi)
 498 {
 499         u32 l;
 500
 501         if (cpu_class_is_omap1()) {
 502                 l = dma_read(CSDP(lch));
 503                 l &= ~(0x1f << 9);
 504                 l |= dest_port << 9;
 505                 dma_write(l, CSDP(lch));
 506         }
 507
 508         l = dma_read(CCR(lch));
 509         l &= ~(0x03 << 14);
 510         l |= dest_amode << 14;
 511         dma_write(l, CCR(lch));
 512
 513         if (cpu_class_is_omap1()) {
 514                 dma_write(dest_start >> 16, CDSA_U(lch));
 515                 dma_write(dest_start, CDSA_L(lch));
 516         }
 517
 518         if (cpu_class_is_omap2())
 519                 dma_write(dest_start, CDSA(lch));
 520
 521         dma_write(dst_ei, CDEI(lch));
 522         dma_write(dst_fi, CDFI(lch));
 523 }
 524 EXPORT_SYMBOL(omap_set_dma_dest_params);
 525
 526 void omap_set_dma_dest_index(int lch, int eidx, int fidx)
 527 {
 528         if (cpu_class_is_omap2())
 529                 return;
 530
 531         dma_write(eidx, CDEI(lch));
 532         dma_write(fidx, CDFI(lch));
 533 }
 534 EXPORT_SYMBOL(omap_set_dma_dest_index);
 535
 536 void omap_set_dma_dest_data_pack(int lch, int enable)
 537 {
 538         u32 l;
 539
 540         l = dma_read(CSDP(lch));
 541         l &= ~(1 << 13);
 542         if (enable)
 543                 l |= 1 << 13;
 544         dma_write(l, CSDP(lch));
 545 }
 546 EXPORT_SYMBOL(omap_set_dma_dest_data_pack);
 547
 548 void omap_set_dma_dest_burst_mode(int lch, enum omap_dma_burst_mode burst_mode)
 549 {
 550         unsigned int burst = 0;
 551         u32 l;
 552
 553         l = dma_read(CSDP(lch));
 554         l &= ~(0x03 << 14);
 555
 556         switch (burst_mode) {
 557         case OMAP_DMA_DATA_BURST_DIS:
 558                 break;
 559         case OMAP_DMA_DATA_BURST_4:
 560                 if (cpu_class_is_omap2())
 561                         burst = 0x1;
 562                 else
 563                         burst = 0x2;
 564                 break;
 565         case OMAP_DMA_DATA_BURST_8:
 566                 if (cpu_class_is_omap2())
 567                         burst = 0x2;
 568                 else
 569                         burst = 0x3;
 570                 break;
 571         case OMAP_DMA_DATA_BURST_16:
 572                 if (cpu_class_is_omap2()) {
 573                         burst = 0x3;
 574                         break;
 575                 }
 576                 /* OMAP1 don't support burst 16
 577                  * fall through
 578                  */
 579         default:
 580                 printk(KERN_ERR "Invalid DMA burst mode\n");
 581                 BUG();
 582                 return;
 583         }
 584         l |= (burst << 14);
 585         dma_write(l, CSDP(lch));
 586 }
 587 EXPORT_SYMBOL(omap_set_dma_dest_burst_mode);
 588
 589 static inline void omap_enable_channel_irq(int lch)
 590 {
 591         u32 status;
 592
 593         /* Clear CSR */
 594         if (cpu_class_is_omap1())
 595                 status = dma_read(CSR(lch));
 596         else if (cpu_class_is_omap2())
 597                 dma_write(OMAP2_DMA_CSR_CLEAR_MASK, CSR(lch));
 598
 599         /* Enable some nice interrupts. */
 600         dma_write(dma_chan[lch].enabled_irqs, CICR(lch));
 601 }
 602
 603 static void omap_disable_channel_irq(int lch)
 604 {
 605         if (cpu_class_is_omap2())
 606                 dma_write(0, CICR(lch));
 607 }
 608
 609 void omap_enable_dma_irq(int lch, u16 bits)
 610 {
 611         dma_chan[lch].enabled_irqs |= bits;
 612 }
 613 EXPORT_SYMBOL(omap_enable_dma_irq);
 614
 615 void omap_disable_dma_irq(int lch, u16 bits)
 616 {
 617         dma_chan[lch].enabled_irqs &= ~bits;
 618 }
 619 EXPORT_SYMBOL(omap_disable_dma_irq);
 620
 621 static inline void enable_lnk(int lch)
 622 {
 623         u32 l;
 624
 625         l = dma_read(CLNK_CTRL(lch));
 626
 627         if (cpu_class_is_omap1())
 628                 l &= ~(1 << 14);
 629
 630         /* Set the ENABLE_LNK bits */
 631         if (dma_chan[lch].next_lch != -1)
 632                 l = dma_chan[lch].next_lch | (1 << 15);
 633
 634 #ifndef CONFIG_ARCH_OMAP1
 635         if (cpu_class_is_omap2())
 636                 if (dma_chan[lch].next_linked_ch != -1)
 637                         l = dma_chan[lch].next_linked_ch | (1 << 15);
 638 #endif
 639
 640         dma_write(l, CLNK_CTRL(lch));
 641 }
 642
 643 static inline void disable_lnk(int lch)
 644 {
 645         u32 l;
 646
 647         l = dma_read(CLNK_CTRL(lch));
 648
 649         /* Disable interrupts */
 650         if (cpu_class_is_omap1()) {
 651                 dma_write(0, CICR(lch));
 652                 /* Set the STOP_LNK bit */
 653                 l |= 1 << 14;
 654         }
 655
 656         if (cpu_class_is_omap2()) {
 657                 omap_disable_channel_irq(lch);
 658                 /* Clear the ENABLE_LNK bit */
 659                 l &= ~(1 << 15);
 660         }
 661
 662         dma_write(l, CLNK_CTRL(lch));
 663         dma_chan[lch].flags &= ~OMAP_DMA_ACTIVE;
 664 }
 665
 666 static inline void omap2_enable_irq_lch(int lch)
 667 {
 668         u32 val;
 669
 670         if (!cpu_class_is_omap2())
 671                 return;
 672
 673         val = dma_read(IRQENABLE_L0);
 674         val |= 1 << lch;
 675         dma_write(val, IRQENABLE_L0);
 676 }
 677
 678 int omap_request_dma(int dev_id, const char *dev_name,
 679                      void (*callback)(int lch, u16 ch_status, void *data),
 680                      void *data, int *dma_ch_out)
 681 {
 682         int ch, free_ch = -1;
 683         unsigned long flags;
 684         struct omap_dma_lch *chan;
 685
 686         spin_lock_irqsave(&dma_chan_lock, flags);
 687         for (ch = 0; ch < dma_chan_count; ch++) {
 688                 if (free_ch == -1 && dma_chan[ch].dev_id == -1) {
 689                         free_ch = ch;
 690                         if (dev_id == 0)
 691                                 break;
 692                 }
 693         }
 694         if (free_ch == -1) {
 695                 spin_unlock_irqrestore(&dma_chan_lock, flags);
 696                 return -EBUSY;
 697         }
 698         chan = dma_chan + free_ch;
 699         chan->dev_id = dev_id;
 700
 701         if (cpu_class_is_omap1())
 702                 clear_lch_regs(free_ch);
 703
 704         if (cpu_class_is_omap2())
 705                 omap_clear_dma(free_ch);
 706
 707         spin_unlock_irqrestore(&dma_chan_lock, flags);
 708
 709         chan->dev_name = dev_name;
 710         chan->callback = callback;
 711         chan->data = data;
 712
 713 #ifndef CONFIG_ARCH_OMAP1
 714         if (cpu_class_is_omap2()) {
 715                 chan->chain_id = -1;
 716                 chan->next_linked_ch = -1;
 717         }
 718 #endif
 719
 720         chan->enabled_irqs = OMAP_DMA_DROP_IRQ | OMAP_DMA_BLOCK_IRQ;
 721
 722         if (cpu_class_is_omap1())
 723                 chan->enabled_irqs |= OMAP1_DMA_TOUT_IRQ;
 724         else if (cpu_class_is_omap2())
 725                 chan->enabled_irqs |= OMAP2_DMA_MISALIGNED_ERR_IRQ |
 726                         OMAP2_DMA_TRANS_ERR_IRQ;
 727
 728         if (cpu_is_omap16xx()) {
 729                 /* If the sync device is set, configure it dynamically. */
 730                 if (dev_id != 0) {
 731                         set_gdma_dev(free_ch + 1, dev_id);
 732                         dev_id = free_ch + 1;
 733                 }
 734                 /*
 735                  * Disable the 1510 compatibility mode and set the sync device
 736                  * id.
 737                  */
 738                 dma_write(dev_id | (1 << 10), CCR(free_ch));
 739         } else if (cpu_is_omap730() || cpu_is_omap15xx()) {
 740                 dma_write(dev_id, CCR(free_ch));
 741         }
 742
 743         if (cpu_class_is_omap2()) {
 744                 omap2_enable_irq_lch(free_ch);
 745                 omap_enable_channel_irq(free_ch);
 746                 /* Clear the CSR register and IRQ status register */
 747                 dma_write(OMAP2_DMA_CSR_CLEAR_MASK, CSR(free_ch));
 748                 dma_write(1 << free_ch, IRQSTATUS_L0);
 749         }
 750
 751         *dma_ch_out = free_ch;
 752
 753         return 0;
 754 }
 755 EXPORT_SYMBOL(omap_request_dma);
 756
 757 void omap_free_dma(int lch)
 758 {
 759         unsigned long flags;
 760
 761         spin_lock_irqsave(&dma_chan_lock, flags);
 762         if (dma_chan[lch].dev_id == -1) {
 763                 pr_err("omap_dma: trying to free unallocated DMA channel %d\n",
 764                        lch);
 765                 spin_unlock_irqrestore(&dma_chan_lock, flags);
 766                 return;
 767         }
 768
 769         dma_chan[lch].dev_id = -1;
 770         dma_chan[lch].next_lch = -1;
 771         dma_chan[lch].callback = NULL;
 772         spin_unlock_irqrestore(&dma_chan_lock, flags);
 773
 774         if (cpu_class_is_omap1()) {
 775                 /* Disable all DMA interrupts for the channel. */
 776                 dma_write(0, CICR(lch));
 777                 /* Make sure the DMA transfer is stopped. */
 778                 dma_write(0, CCR(lch));
 779         }
 780
 781         if (cpu_class_is_omap2()) {
 782                 u32 val;
 783                 /* Disable interrupts */
 784                 val = dma_read(IRQENABLE_L0);
 785                 val &= ~(1 << lch);
 786                 dma_write(val, IRQENABLE_L0);
 787
 788                 /* Clear the CSR register and IRQ status register */
 789                 dma_write(OMAP2_DMA_CSR_CLEAR_MASK, CSR(lch));
 790                 dma_write(1 << lch, IRQSTATUS_L0);
 791
 792                 /* Disable all DMA interrupts for the channel. */
 793                 dma_write(0, CICR(lch));
 794
 795                 /* Make sure the DMA transfer is stopped. */
 796                 dma_write(0, CCR(lch));
 797                 omap_clear_dma(lch);
 798         }
 799 }
 800 EXPORT_SYMBOL(omap_free_dma);
 801
 802 /**
 803  * @brief omap_dma_set_global_params : Set global priority settings for dma
 804  *
 805  * @param arb_rate
 806  * @param max_fifo_depth
 807  * @param tparams - Number of thereads to reserve : DMA_THREAD_RESERVE_NORM
 808  *                                                  DMA_THREAD_RESERVE_ONET
 809  *                                                  DMA_THREAD_RESERVE_TWOT
 810  *                                                  DMA_THREAD_RESERVE_THREET
 811  */
 812 void
 813 omap_dma_set_global_params(int arb_rate, int max_fifo_depth, int tparams)
 814 {
 815         u32 reg;
 816
 817         if (!cpu_class_is_omap2()) {
 818                 printk(KERN_ERR "FIXME: no %s on 15xx/16xx\n", __func__);
 819                 return;
 820         }
 821
 822         if (arb_rate == 0)
 823                 arb_rate = 1;
 824
 825         reg = (arb_rate & 0xff) << 16;
 826         reg |= (0xff & max_fifo_depth);
 827
 828         dma_write(reg, GCR);
 829 }
 830 EXPORT_SYMBOL(omap_dma_set_global_params);
 831
 832 /**
 833  * @brief omap_dma_set_prio_lch : Set channel wise priority settings
 834  *
 835  * @param lch
 836  * @param read_prio - Read priority
 837  * @param write_prio - Write priority
 838  * Both of the above can be set with one of the following values :
 839  *      DMA_CH_PRIO_HIGH/DMA_CH_PRIO_LOW
 840  */
 841 int
 842 omap_dma_set_prio_lch(int lch, unsigned char read_prio,
 843                       unsigned char write_prio)
 844 {
 845         u32 l;
 846
 847         if (unlikely((lch < 0 || lch >= dma_lch_count))) {
 848                 printk(KERN_ERR "Invalid channel id\n");
 849                 return -EINVAL;
 850         }
 851         l = dma_read(CCR(lch));
 852         l &= ~((1 << 6) | (1 << 26));
 853         if (cpu_is_omap2430() || cpu_is_omap34xx())
 854                 l |= ((read_prio & 0x1) << 6) | ((write_prio & 0x1) << 26);
 855         else
 856                 l |= ((read_prio & 0x1) << 6);
 857
 858         dma_write(l, CCR(lch));
 859
 860         return 0;
 861 }
 862 EXPORT_SYMBOL(omap_dma_set_prio_lch);
 863
 864 /*
 865  * Clears any DMA state so the DMA engine is ready to restart with new buffers
 866  * through omap_start_dma(). Any buffers in flight are discarded.
 867  */
 868 void omap_clear_dma(int lch)
 869 {
 870         unsigned long flags;
 871
 872         local_irq_save(flags);
 873
 874         if (cpu_class_is_omap1()) {
 875                 u32 l;
 876
 877                 l = dma_read(CCR(lch));
 878                 l &= ~OMAP_DMA_CCR_EN;
 879                 dma_write(l, CCR(lch));
 880
 881                 /* Clear pending interrupts */
 882                 l = dma_read(CSR(lch));
 883         }
 884
 885         if (cpu_class_is_omap2()) {
 886                 int i;
 887                 void __iomem *lch_base = omap_dma_base + OMAP_DMA4_CH_BASE(lch);
 888                 for (i = 0; i < 0x44; i += 4)
 889                         __raw_writel(0, lch_base + i);
 890         }
 891
 892         local_irq_restore(flags);
 893 }
 894 EXPORT_SYMBOL(omap_clear_dma);
 895
 896 void omap_start_dma(int lch)
 897 {
 898         u32 l;
 899
 900         if (!omap_dma_in_1510_mode() && dma_chan[lch].next_lch != -1) {
 901                 int next_lch, cur_lch;
 902                 char dma_chan_link_map[OMAP_DMA4_LOGICAL_DMA_CH_COUNT];
 903
 904                 dma_chan_link_map[lch] = 1;
 905                 /* Set the link register of the first channel */
 906                 enable_lnk(lch);
 907
 908                 memset(dma_chan_link_map, 0, sizeof(dma_chan_link_map));
 909                 cur_lch = dma_chan[lch].next_lch;
 910                 do {
 911                         next_lch = dma_chan[cur_lch].next_lch;
 912
 913                         /* The loop case: we've been here already */
 914                         if (dma_chan_link_map[cur_lch])
 915                                 break;
 916                         /* Mark the current channel */
 917                         dma_chan_link_map[cur_lch] = 1;
 918
 919                         enable_lnk(cur_lch);
 920                         omap_enable_channel_irq(cur_lch);
 921
 922                         cur_lch = next_lch;
 923                 } while (next_lch != -1);
 924         } else if (cpu_class_is_omap2()) {
 925                 /* Errata: Need to write lch even if not using chaining */
 926                 dma_write(lch, CLNK_CTRL(lch));
 927         }
 928
 929         omap_enable_channel_irq(lch);
 930
 931         l = dma_read(CCR(lch));
 932
 933         /*
 934          * Errata: On ES2.0 BUFFERING disable must be set.
 935          * This will always fail on ES1.0
 936          */
 937         if (cpu_is_omap24xx())
 938                 l |= OMAP_DMA_CCR_EN;
 939
 940         l |= OMAP_DMA_CCR_EN;
 941         dma_write(l, CCR(lch));
 942
 943         dma_chan[lch].flags |= OMAP_DMA_ACTIVE;
 944 }
 945 EXPORT_SYMBOL(omap_start_dma);
 946
 947 void omap_stop_dma(int lch)
 948 {
 949         u32 l;
 950
 951         if (!omap_dma_in_1510_mode() && dma_chan[lch].next_lch != -1) {
 952                 int next_lch, cur_lch = lch;
 953                 char dma_chan_link_map[OMAP_DMA4_LOGICAL_DMA_CH_COUNT];
 954
 955                 memset(dma_chan_link_map, 0, sizeof(dma_chan_link_map));
 956                 do {
 957                         /* The loop case: we've been here already */
 958                         if (dma_chan_link_map[cur_lch])
 959                                 break;
 960                         /* Mark the current channel */
 961                         dma_chan_link_map[cur_lch] = 1;
 962
 963                         disable_lnk(cur_lch);
 964
 965                         next_lch = dma_chan[cur_lch].next_lch;
 966                         cur_lch = next_lch;
 967                 } while (next_lch != -1);
 968
 969                 return;
 970         }
 971
 972         /* Disable all interrupts on the channel */
 973         if (cpu_class_is_omap1())
 974                 dma_write(0, CICR(lch));
 975
 976         l = dma_read(CCR(lch));
 977         l &= ~OMAP_DMA_CCR_EN;
 978         dma_write(l, CCR(lch));
 979
 980         dma_chan[lch].flags &= ~OMAP_DMA_ACTIVE;
 981 }
 982 EXPORT_SYMBOL(omap_stop_dma);
 983
 984 /*
 985  * Allows changing the DMA callback function or data. This may be needed if
 986  * the driver shares a single DMA channel for multiple dma triggers.
 987  */
 988 int omap_set_dma_callback(int lch,
 989                           void (*callback)(int lch, u16 ch_status, void *data),
 990                           void *data)
 991 {
 992         unsigned long flags;
 993
 994         if (lch < 0)
 995                 return -ENODEV;
 996
 997         spin_lock_irqsave(&dma_chan_lock, flags);
 998         if (dma_chan[lch].dev_id == -1) {
 999                 printk(KERN_ERR "DMA callback for not set for free channel\n");
1000                 spin_unlock_irqrestore(&dma_chan_lock, flags);
1001                 return -EINVAL;
1002         }
1003         dma_chan[lch].callback = callback;
1004         dma_chan[lch].data = data;
1005         spin_unlock_irqrestore(&dma_chan_lock, flags);
1006
1007         return 0;
1008 }
1009 EXPORT_SYMBOL(omap_set_dma_callback);
1010
1011 /*
1012  * Returns current physical source address for the given DMA channel.
1013  * If the channel is running the caller must disable interrupts prior calling
1014  * this function and process the returned value before re-enabling interrupt to
1015  * prevent races with the interrupt handler. Note that in continuous mode there
1016  * is a chance for CSSA_L register overflow inbetween the two reads resulting
1017  * in incorrect return value.
1018  */
1019 dma_addr_t omap_get_dma_src_pos(int lch)
1020 {
1021         dma_addr_t offset = 0;
1022
1023         if (cpu_is_omap15xx())
1024                 offset = dma_read(CPC(lch));
1025         else
1026                 offset = dma_read(CSAC(lch));
1027
1028         /*
1029          * omap 3.2/3.3 erratum: sometimes 0 is returned if CSAC/CDAC is
1030          * read before the DMA controller finished disabling the channel.
1031          */
1032         if (!cpu_is_omap15xx() && offset == 0)
1033                 offset = dma_read(CSAC(lch));
1034
1035         if (cpu_class_is_omap1())
1036                 offset |= (dma_read(CSSA_U(lch)) << 16);
1037
1038         return offset;
1039 }
1040 EXPORT_SYMBOL(omap_get_dma_src_pos);
1041
1042 /*
1043  * Returns current physical destination address for the given DMA channel.
1044  * If the channel is running the caller must disable interrupts prior calling
1045  * this function and process the returned value before re-enabling interrupt to
1046  * prevent races with the interrupt handler. Note that in continuous mode there
1047  * is a chance for CDSA_L register overflow inbetween the two reads resulting
1048  * in incorrect return value.
1049  */
1050 dma_addr_t omap_get_dma_dst_pos(int lch)
1051 {
1052         dma_addr_t offset = 0;
1053
1054         if (cpu_is_omap15xx())
1055                 offset = dma_read(CPC(lch));
1056         else
1057                 offset = dma_read(CDAC(lch));
1058
1059         /*
1060          * omap 3.2/3.3 erratum: sometimes 0 is returned if CSAC/CDAC is
1061          * read before the DMA controller finished disabling the channel.
1062          */
1063         if (!cpu_is_omap15xx() && offset == 0)
1064                 offset = dma_read(CDAC(lch));
1065
1066         if (cpu_class_is_omap1())
1067                 offset |= (dma_read(CDSA_U(lch)) << 16);
1068
1069         return offset;
1070 }
1071 EXPORT_SYMBOL(omap_get_dma_dst_pos);
1072
1073 int omap_get_dma_active_status(int lch)
1074 {
1075         return (dma_read(CCR(lch)) & OMAP_DMA_CCR_EN) != 0;
1076 }
1077 EXPORT_SYMBOL(omap_get_dma_active_status);
1078
1079 int omap_dma_running(void)
1080 {
1081         int lch;
1082
1083         /* Check if LCD DMA is running */
1084         if (cpu_is_omap16xx())
1085                 if (omap_readw(OMAP1610_DMA_LCD_CCR) & OMAP_DMA_CCR_EN)
1086                         return 1;
1087
1088         for (lch = 0; lch < dma_chan_count; lch++)
1089                 if (dma_read(CCR(lch)) & OMAP_DMA_CCR_EN)
1090                         return 1;
1091
1092         return 0;
1093 }
1094
1095 /*
1096  * lch_queue DMA will start right after lch_head one is finished.
1097  * For this DMA link to start, you still need to start (see omap_start_dma)
1098  * the first one. That will fire up the entire queue.
1099  */
1100 void omap_dma_link_lch(int lch_head, int lch_queue)
1101 {
1102         if (omap_dma_in_1510_mode()) {
1103                 printk(KERN_ERR "DMA linking is not supported in 1510 mode\n");
1104                 BUG();
1105                 return;
1106         }
1107
1108         if ((dma_chan[lch_head].dev_id == -1) ||
1109             (dma_chan[lch_queue].dev_id == -1)) {
1110                 printk(KERN_ERR "omap_dma: trying to link "
1111                        "non requested channels\n");
1112                 dump_stack();
1113         }
1114
1115         dma_chan[lch_head].next_lch = lch_queue;
1116 }
1117 EXPORT_SYMBOL(omap_dma_link_lch);
1118
1119 /*
1120  * Once the DMA queue is stopped, we can destroy it.
1121  */
1122 void omap_dma_unlink_lch(int lch_head, int lch_queue)
1123 {
1124         if (omap_dma_in_1510_mode()) {
1125                 printk(KERN_ERR "DMA linking is not supported in 1510 mode\n");
1126                 BUG();
1127                 return;
1128         }
1129
1130         if (dma_chan[lch_head].next_lch != lch_queue ||
1131             dma_chan[lch_head].next_lch == -1) {
1132                 printk(KERN_ERR "omap_dma: trying to unlink "
1133                        "non linked channels\n");
1134                 dump_stack();
1135         }
1136
1137         if ((dma_chan[lch_head].flags & OMAP_DMA_ACTIVE) ||
1138             (dma_chan[lch_head].flags & OMAP_DMA_ACTIVE)) {
1139                 printk(KERN_ERR "omap_dma: You need to stop the DMA channels "
1140                        "before unlinking\n");
1141                 dump_stack();
1142         }
1143
1144         dma_chan[lch_head].next_lch = -1;
1145 }
1146 EXPORT_SYMBOL(omap_dma_unlink_lch);
1147
1148 /*----------------------------------------------------------------------------*/
1149
1150 #ifndef CONFIG_ARCH_OMAP1
1151 /* Create chain of DMA channesls */
1152 static void create_dma_lch_chain(int lch_head, int lch_queue)
1153 {
1154         u32 l;
1155
1156         /* Check if this is the first link in chain */
1157         if (dma_chan[lch_head].next_linked_ch == -1) {
1158                 dma_chan[lch_head].next_linked_ch = lch_queue;
1159                 dma_chan[lch_head].prev_linked_ch = lch_queue;
1160                 dma_chan[lch_queue].next_linked_ch = lch_head;
1161                 dma_chan[lch_queue].prev_linked_ch = lch_head;
1162         }
1163
1164         /* a link exists, link the new channel in circular chain */
1165         else {
1166                 dma_chan[lch_queue].next_linked_ch =
1167                                         dma_chan[lch_head].next_linked_ch;
1168                 dma_chan[lch_queue].prev_linked_ch = lch_head;
1169                 dma_chan[lch_head].next_linked_ch = lch_queue;
1170                 dma_chan[dma_chan[lch_queue].next_linked_ch].prev_linked_ch =
1171                                         lch_queue;
1172         }
1173
1174         l = dma_read(CLNK_CTRL(lch_head));
1175         l &= ~(0x1f);
1176         l |= lch_queue;
1177         dma_write(l, CLNK_CTRL(lch_head));
1178
1179         l = dma_read(CLNK_CTRL(lch_queue));
1180         l &= ~(0x1f);
1181         l |= (dma_chan[lch_queue].next_linked_ch);
1182         dma_write(l, CLNK_CTRL(lch_queue));
1183 }
1184
1185 /**
1186  * @brief omap_request_dma_chain : Request a chain of DMA channels
1187  *
1188  * @param dev_id - Device id using the dma channel
1189  * @param dev_name - Device name
1190  * @param callback - Call back function
1191  * @chain_id -
1192  * @no_of_chans - Number of channels requested
1193  * @chain_mode - Dynamic or static chaining : OMAP_DMA_STATIC_CHAIN
1194  *                                            OMAP_DMA_DYNAMIC_CHAIN
1195  * @params - Channel parameters
1196  *
1197  * @return - Succes : 0
1198  *           Failure: -EINVAL/-ENOMEM
1199  */
1200 int omap_request_dma_chain(int dev_id, const char *dev_name,
1201                            void (*callback) (int chain_id, u16 ch_status,
1202                                              void *data),
1203                            int *chain_id, int no_of_chans, int chain_mode,
1204                            struct omap_dma_channel_params params)
1205 {
1206         int *channels;
1207         int i, err;
1208
1209         /* Is the chain mode valid ? */
1210         if (chain_mode != OMAP_DMA_STATIC_CHAIN
1211                         && chain_mode != OMAP_DMA_DYNAMIC_CHAIN) {
1212                 printk(KERN_ERR "Invalid chain mode requested\n");
1213                 return -EINVAL;
1214         }
1215
1216         if (unlikely((no_of_chans < 1
1217                         || no_of_chans > dma_lch_count))) {
1218                 printk(KERN_ERR "Invalid Number of channels requested\n");
1219                 return -EINVAL;
1220         }
1221
1222         /* Allocate a queue to maintain the status of the channels
1223          * in the chain */
1224         channels = kmalloc(sizeof(*channels) * no_of_chans, GFP_KERNEL);
1225         if (channels == NULL) {
1226                 printk(KERN_ERR "omap_dma: No memory for channel queue\n");
1227                 return -ENOMEM;
1228         }
1229
1230         /* request and reserve DMA channels for the chain */
1231         for (i = 0; i < no_of_chans; i++) {
1232                 err = omap_request_dma(dev_id, dev_name,
1233                                         callback, NULL, &channels[i]);
1234                 if (err < 0) {
1235                         int j;
1236                         for (j = 0; j < i; j++)
1237                                 omap_free_dma(channels[j]);
1238                         kfree(channels);
1239                         printk(KERN_ERR "omap_dma: Request failed %d\n", err);
1240                         return err;
1241                 }
1242                 dma_chan[channels[i]].prev_linked_ch = -1;
1243                 dma_chan[channels[i]].state = DMA_CH_NOTSTARTED;
1244
1245                 /*
1246                  * Allowing client drivers to set common parameters now,
1247                  * so that later only relevant (src_start, dest_start
1248                  * and element count) can be set
1249                  */
1250                 omap_set_dma_params(channels[i], &params);
1251         }
1252
1253         *chain_id = channels[0];
1254         dma_linked_lch[*chain_id].linked_dmach_q = channels;
1255         dma_linked_lch[*chain_id].chain_mode = chain_mode;
1256         dma_linked_lch[*chain_id].chain_state = DMA_CHAIN_NOTSTARTED;
1257         dma_linked_lch[*chain_id].no_of_lchs_linked = no_of_chans;
1258
1259         for (i = 0; i < no_of_chans; i++)
1260                 dma_chan[channels[i]].chain_id = *chain_id;
1261
1262         /* Reset the Queue pointers */
1263         OMAP_DMA_CHAIN_QINIT(*chain_id);
1264
1265         /* Set up the chain */
1266         if (no_of_chans == 1)
1267                 create_dma_lch_chain(channels[0], channels[0]);
1268         else {
1269                 for (i = 0; i < (no_of_chans - 1); i++)
1270                         create_dma_lch_chain(channels[i], channels[i + 1]);
1271         }
1272
1273         return 0;
1274 }
1275 EXPORT_SYMBOL(omap_request_dma_chain);
1276
1277 /**
1278  * @brief omap_modify_dma_chain_param : Modify the chain's params - Modify the
1279  * params after setting it. Dont do this while dma is running!!
1280  *
1281  * @param chain_id - Chained logical channel id.
1282  * @param params
1283  *
1284  * @return - Success : 0
1285  *           Failure : -EINVAL
1286  */
1287 int omap_modify_dma_chain_params(int chain_id,
1288                                 struct omap_dma_channel_params params)
1289 {
1290         int *channels;
1291         u32 i;
1292
1293         /* Check for input params */
1294         if (unlikely((chain_id < 0
1295                         || chain_id >= dma_lch_count))) {
1296                 printk(KERN_ERR "Invalid chain id\n");
1297                 return -EINVAL;
1298         }
1299
1300         /* Check if the chain exists */
1301         if (dma_linked_lch[chain_id].linked_dmach_q == NULL) {
1302                 printk(KERN_ERR "Chain doesn't exists\n");
1303                 return -EINVAL;
1304         }
1305         channels = dma_linked_lch[chain_id].linked_dmach_q;
1306
1307         for (i = 0; i < dma_linked_lch[chain_id].no_of_lchs_linked; i++) {
1308                 /*
1309                  * Allowing client drivers to set common parameters now,
1310                  * so that later only relevant (src_start, dest_start
1311                  * and element count) can be set
1312                  */
1313                 omap_set_dma_params(channels[i], &params);
1314         }
1315
1316         return 0;
1317 }
1318 EXPORT_SYMBOL(omap_modify_dma_chain_params);
1319
1320 /**
1321  * @brief omap_free_dma_chain - Free all the logical channels in a chain.
1322  *
1323  * @param chain_id
1324  *
1325  * @return - Success : 0
1326  *           Failure : -EINVAL
1327  */
1328 int omap_free_dma_chain(int chain_id)
1329 {
1330         int *channels;
1331         u32 i;
1332
1333         /* Check for input params */
1334         if (unlikely((chain_id < 0 || chain_id >= dma_lch_count))) {
1335                 printk(KERN_ERR "Invalid chain id\n");
1336                 return -EINVAL;
1337         }
1338
1339         /* Check if the chain exists */
1340         if (dma_linked_lch[chain_id].linked_dmach_q == NULL) {
1341                 printk(KERN_ERR "Chain doesn't exists\n");
1342                 return -EINVAL;
1343         }
1344
1345         channels = dma_linked_lch[chain_id].linked_dmach_q;
1346         for (i = 0; i < dma_linked_lch[chain_id].no_of_lchs_linked; i++) {
1347                 dma_chan[channels[i]].next_linked_ch = -1;
1348                 dma_chan[channels[i]].prev_linked_ch = -1;
1349                 dma_chan[channels[i]].chain_id = -1;
1350                 dma_chan[channels[i]].state = DMA_CH_NOTSTARTED;
1351                 omap_free_dma(channels[i]);
1352         }
1353
1354         kfree(channels);
1355
1356         dma_linked_lch[chain_id].linked_dmach_q = NULL;
1357         dma_linked_lch[chain_id].chain_mode = -1;
1358         dma_linked_lch[chain_id].chain_state = -1;
1359
1360         return (0);
1361 }
1362 EXPORT_SYMBOL(omap_free_dma_chain);
1363
1364 /**
1365  * @brief omap_dma_chain_status - Check if the chain is in
1366  * active / inactive state.
1367  * @param chain_id
1368  *
1369  * @return - Success : OMAP_DMA_CHAIN_ACTIVE/OMAP_DMA_CHAIN_INACTIVE
1370  *           Failure : -EINVAL
1371  */
1372 int omap_dma_chain_status(int chain_id)
1373 {
1374         /* Check for input params */
1375         if (unlikely((chain_id < 0 || chain_id >= dma_lch_count))) {
1376                 printk(KERN_ERR "Invalid chain id\n");
1377                 return -EINVAL;
1378         }
1379
1380         /* Check if the chain exists */
1381         if (dma_linked_lch[chain_id].linked_dmach_q == NULL) {
1382                 printk(KERN_ERR "Chain doesn't exists\n");
1383                 return -EINVAL;
1384         }
1385         pr_debug("CHAINID=%d, qcnt=%d\n", chain_id,
1386                         dma_linked_lch[chain_id].q_count);
1387
1388         if (OMAP_DMA_CHAIN_QEMPTY(chain_id))
1389                 return OMAP_DMA_CHAIN_INACTIVE;
1390
1391         return OMAP_DMA_CHAIN_ACTIVE;
1392 }
1393 EXPORT_SYMBOL(omap_dma_chain_status);
1394
1395 /**
1396  * @brief omap_dma_chain_a_transfer - Get a free channel from a chain,
1397  * set the params and start the transfer.
1398  *
1399  * @param chain_id
1400  * @param src_start - buffer start address
1401  * @param dest_start - Dest address
1402  * @param elem_count
1403  * @param frame_count
1404  * @param callbk_data - channel callback parameter data.
1405  *
1406  * @return  - Success : 0
1407  *            Failure: -EINVAL/-EBUSY
1408  */
1409 int omap_dma_chain_a_transfer(int chain_id, int src_start, int dest_start,
1410                         int elem_count, int frame_count, void *callbk_data)
1411 {
1412         int *channels;
1413         u32 l, lch;
1414         int start_dma = 0;
1415
1416         /*
1417          * if buffer size is less than 1 then there is
1418          * no use of starting the chain
1419          */
1420         if (elem_count < 1) {
1421                 printk(KERN_ERR "Invalid buffer size\n");
1422                 return -EINVAL;
1423         }
1424
1425         /* Check for input params */
1426         if (unlikely((chain_id < 0
1427                         || chain_id >= dma_lch_count))) {
1428                 printk(KERN_ERR "Invalid chain id\n");
1429                 return -EINVAL;
1430         }
1431
1432         /* Check if the chain exists */
1433         if (dma_linked_lch[chain_id].linked_dmach_q == NULL) {
1434                 printk(KERN_ERR "Chain doesn't exist\n");
1435                 return -EINVAL;
1436         }
1437
1438         /* Check if all the channels in chain are in use */
1439         if (OMAP_DMA_CHAIN_QFULL(chain_id))
1440                 return -EBUSY;
1441
1442         /* Frame count may be negative in case of indexed transfers */
1443         channels = dma_linked_lch[chain_id].linked_dmach_q;
1444
1445         /* Get a free channel */
1446         lch = channels[dma_linked_lch[chain_id].q_tail];
1447
1448         /* Store the callback data */
1449         dma_chan[lch].data = callbk_data;
1450
1451         /* Increment the q_tail */
1452         OMAP_DMA_CHAIN_INCQTAIL(chain_id);
1453
1454         /* Set the params to the free channel */
1455         if (src_start != 0)
1456                 dma_write(src_start, CSSA(lch));
1457         if (dest_start != 0)
1458                 dma_write(dest_start, CDSA(lch));
1459
1460         /* Write the buffer size */
1461         dma_write(elem_count, CEN(lch));
1462         dma_write(frame_count, CFN(lch));
1463
1464         /*
1465          * If the chain is dynamically linked,
1466          * then we may have to start the chain if its not active
1467          */
1468         if (dma_linked_lch[chain_id].chain_mode == OMAP_DMA_DYNAMIC_CHAIN) {
1469
1470                 /*
1471                  * In Dynamic chain, if the chain is not started,
1472                  * queue the channel
1473                  */
1474                 if (dma_linked_lch[chain_id].chain_state ==
1475                                                 DMA_CHAIN_NOTSTARTED) {
1476                         /* Enable the link in previous channel */
1477                         if (dma_chan[dma_chan[lch].prev_linked_ch].state ==
1478                                                                 DMA_CH_QUEUED)
1479                                 enable_lnk(dma_chan[lch].prev_linked_ch);
1480                         dma_chan[lch].state = DMA_CH_QUEUED;
1481                 }
1482
1483                 /*
1484                  * Chain is already started, make sure its active,
1485                  * if not then start the chain
1486                  */
1487                 else {
1488                         start_dma = 1;
1489
1490                         if (dma_chan[dma_chan[lch].prev_linked_ch].state ==
1491                                                         DMA_CH_STARTED) {
1492                                 enable_lnk(dma_chan[lch].prev_linked_ch);
1493                                 dma_chan[lch].state = DMA_CH_QUEUED;
1494                                 start_dma = 0;
1495                                 if (0 == ((1 << 7) & dma_read(
1496                                         CCR(dma_chan[lch].prev_linked_ch)))) {
1497                                         disable_lnk(dma_chan[lch].
1498                                                     prev_linked_ch);
1499                                         pr_debug("\n prev ch is stopped\n");
1500                                         start_dma = 1;
1501                                 }
1502                         }
1503
1504                         else if (dma_chan[dma_chan[lch].prev_linked_ch].state
1505                                                         == DMA_CH_QUEUED) {
1506                                 enable_lnk(dma_chan[lch].prev_linked_ch);
1507                                 dma_chan[lch].state = DMA_CH_QUEUED;
1508                                 start_dma = 0;
1509                         }
1510                         omap_enable_channel_irq(lch);
1511
1512                         l = dma_read(CCR(lch));
1513
1514                         if ((0 == (l & (1 << 24))))
1515                                 l &= ~(1 << 25);
1516                         else
1517                                 l |= (1 << 25);
1518                         if (start_dma == 1) {
1519                                 if (0 == (l & (1 << 7))) {
1520                                         l |= (1 << 7);
1521                                         dma_chan[lch].state = DMA_CH_STARTED;
1522                                         pr_debug("starting %d\n", lch);
1523                                         dma_write(l, CCR(lch));
1524                                 } else
1525                                         start_dma = 0;
1526                         } else {
1527                                 if (0 == (l & (1 << 7)))
1528                                         dma_write(l, CCR(lch));
1529                         }
1530                         dma_chan[lch].flags |= OMAP_DMA_ACTIVE;
1531                 }
1532         }
1533
1534         return 0;
1535 }
1536 EXPORT_SYMBOL(omap_dma_chain_a_transfer);
1537
1538 /**
1539  * @brief omap_start_dma_chain_transfers - Start the chain
1540  *
1541  * @param chain_id
1542  *
1543  * @return - Success : 0
1544  *           Failure : -EINVAL/-EBUSY
1545  */
1546 int omap_start_dma_chain_transfers(int chain_id)
1547 {
1548         int *channels;
1549         u32 l, i;
1550
1551         if (unlikely((chain_id < 0 || chain_id >= dma_lch_count))) {
1552                 printk(KERN_ERR "Invalid chain id\n");
1553                 return -EINVAL;
1554         }
1555
1556         channels = dma_linked_lch[chain_id].linked_dmach_q;
1557
1558         if (dma_linked_lch[channels[0]].chain_state == DMA_CHAIN_STARTED) {
1559                 printk(KERN_ERR "Chain is already started\n");
1560                 return -EBUSY;
1561         }
1562
1563         if (dma_linked_lch[chain_id].chain_mode == OMAP_DMA_STATIC_CHAIN) {
1564                 for (i = 0; i < dma_linked_lch[chain_id].no_of_lchs_linked;
1565                                                                         i++) {
1566                         enable_lnk(channels[i]);
1567                         omap_enable_channel_irq(channels[i]);
1568                 }
1569         } else {
1570                 omap_enable_channel_irq(channels[0]);
1571         }
1572
1573         l = dma_read(CCR(channels[0]));
1574         l |= (1 << 7);
1575         dma_linked_lch[chain_id].chain_state = DMA_CHAIN_STARTED;
1576         dma_chan[channels[0]].state = DMA_CH_STARTED;
1577
1578         if ((0 == (l & (1 << 24))))
1579                 l &= ~(1 << 25);
1580         else
1581                 l |= (1 << 25);
1582         dma_write(l, CCR(channels[0]));
1583
1584         dma_chan[channels[0]].flags |= OMAP_DMA_ACTIVE;
1585
1586         return 0;
1587 }
1588 EXPORT_SYMBOL(omap_start_dma_chain_transfers);
1589
1590 /**
1591  * @brief omap_stop_dma_chain_transfers - Stop the dma transfer of a chain.
1592  *
1593  * @param chain_id
1594  *
1595  * @return - Success : 0
1596  *           Failure : EINVAL
1597  */
1598 int omap_stop_dma_chain_transfers(int chain_id)
1599 {
1600         int *channels;
1601         u32 l, i;
1602         u32 sys_cf;
1603
1604         /* Check for input params */
1605         if (unlikely((chain_id < 0 || chain_id >= dma_lch_count))) {
1606                 printk(KERN_ERR "Invalid chain id\n");
1607                 return -EINVAL;
1608         }
1609
1610         /* Check if the chain exists */
1611         if (dma_linked_lch[chain_id].linked_dmach_q == NULL) {
1612                 printk(KERN_ERR "Chain doesn't exists\n");
1613                 return -EINVAL;
1614         }
1615         channels = dma_linked_lch[chain_id].linked_dmach_q;
1616
1617         /*
1618          * DMA Errata:
1619          * Special programming model needed to disable DMA before end of block
1620          */
1621         sys_cf = dma_read(OCP_SYSCONFIG);
1622         l = sys_cf;
1623         /* Middle mode reg set no Standby */
1624         l &= ~((1 << 12)|(1 << 13));
1625         dma_write(l, OCP_SYSCONFIG);
1626
1627         for (i = 0; i < dma_linked_lch[chain_id].no_of_lchs_linked; i++) {
1628
1629                 /* Stop the Channel transmission */
1630                 l = dma_read(CCR(channels[i]));
1631                 l &= ~(1 << 7);
1632                 dma_write(l, CCR(channels[i]));
1633
1634                 /* Disable the link in all the channels */
1635                 disable_lnk(channels[i]);
1636                 dma_chan[channels[i]].state = DMA_CH_NOTSTARTED;
1637
1638         }
1639         dma_linked_lch[chain_id].chain_state = DMA_CHAIN_NOTSTARTED;
1640
1641         /* Reset the Queue pointers */
1642         OMAP_DMA_CHAIN_QINIT(chain_id);
1643
1644         /* Errata - put in the old value */
1645         dma_write(sys_cf, OCP_SYSCONFIG);
1646
1647         return 0;
1648 }
1649 EXPORT_SYMBOL(omap_stop_dma_chain_transfers);
1650
1651 /* Get the index of the ongoing DMA in chain */
1652 /**
1653  * @brief omap_get_dma_chain_index - Get the element and frame index
1654  * of the ongoing DMA in chain
1655  *
1656  * @param chain_id
1657  * @param ei - Element index
1658  * @param fi - Frame index
1659  *
1660  * @return - Success : 0
1661  *           Failure : -EINVAL
1662  */
1663 int omap_get_dma_chain_index(int chain_id, int *ei, int *fi)
1664 {
1665         int lch;
1666         int *channels;
1667
1668         /* Check for input params */
1669         if (unlikely((chain_id < 0 || chain_id >= dma_lch_count))) {
1670                 printk(KERN_ERR "Invalid chain id\n");
1671                 return -EINVAL;
1672         }
1673
1674         /* Check if the chain exists */
1675         if (dma_linked_lch[chain_id].linked_dmach_q == NULL) {
1676                 printk(KERN_ERR "Chain doesn't exists\n");
1677                 return -EINVAL;
1678         }
1679         if ((!ei) || (!fi))
1680                 return -EINVAL;
1681
1682         channels = dma_linked_lch[chain_id].linked_dmach_q;
1683
1684         /* Get the current channel */
1685         lch = channels[dma_linked_lch[chain_id].q_head];
1686
1687         *ei = dma_read(CCEN(lch));
1688         *fi = dma_read(CCFN(lch));
1689
1690         return 0;
1691 }
1692 EXPORT_SYMBOL(omap_get_dma_chain_index);
1693
1694 /**
1695  * @brief omap_get_dma_chain_dst_pos - Get the destination position of the
1696  * ongoing DMA in chain
1697  *
1698  * @param chain_id
1699  *
1700  * @return - Success : Destination position
1701  *           Failure : -EINVAL
1702  */
1703 int omap_get_dma_chain_dst_pos(int chain_id)
1704 {
1705         int lch;
1706         int *channels;
1707
1708         /* Check for input params */
1709         if (unlikely((chain_id < 0 || chain_id >= dma_lch_count))) {
1710                 printk(KERN_ERR "Invalid chain id\n");
1711                 return -EINVAL;
1712         }
1713
1714         /* Check if the chain exists */
1715         if (dma_linked_lch[chain_id].linked_dmach_q == NULL) {
1716                 printk(KERN_ERR "Chain doesn't exists\n");
1717                 return -EINVAL;
1718         }
1719
1720         channels = dma_linked_lch[chain_id].linked_dmach_q;
1721
1722         /* Get the current channel */
1723         lch = channels[dma_linked_lch[chain_id].q_head];
1724
1725         return dma_read(CDAC(lch));
1726 }
1727 EXPORT_SYMBOL(omap_get_dma_chain_dst_pos);
1728
1729 /**
1730  * @brief omap_get_dma_chain_src_pos - Get the source position
1731  * of the ongoing DMA in chain
1732  * @param chain_id
1733  *
1734  * @return - Success : Destination position
1735  *           Failure : -EINVAL
1736  */
1737 int omap_get_dma_chain_src_pos(int chain_id)
1738 {
1739         int lch;
1740         int *channels;
1741
1742         /* Check for input params */
1743         if (unlikely((chain_id < 0 || chain_id >= dma_lch_count))) {
1744                 printk(KERN_ERR "Invalid chain id\n");
1745                 return -EINVAL;
1746         }
1747
1748         /* Check if the chain exists */
1749         if (dma_linked_lch[chain_id].linked_dmach_q == NULL) {
1750                 printk(KERN_ERR "Chain doesn't exists\n");
1751                 return -EINVAL;
1752         }
1753
1754         channels = dma_linked_lch[chain_id].linked_dmach_q;
1755
1756         /* Get the current channel */
1757         lch = channels[dma_linked_lch[chain_id].q_head];
1758
1759         return dma_read(CSAC(lch));
1760 }
1761 EXPORT_SYMBOL(omap_get_dma_chain_src_pos);
1762 #endif  /* ifndef CONFIG_ARCH_OMAP1 */
1763
1764 /*----------------------------------------------------------------------------*/
1765
1766 #ifdef CONFIG_ARCH_OMAP1
1767
1768 static int omap1_dma_handle_ch(int ch)
1769 {
1770         u32 csr;
1771
1772         if (enable_1510_mode && ch >= 6) {
1773                 csr = dma_chan[ch].saved_csr;
1774                 dma_chan[ch].saved_csr = 0;
1775         } else
1776                 csr = dma_read(CSR(ch));
1777         if (enable_1510_mode && ch <= 2 && (csr >> 7) != 0) {
1778                 dma_chan[ch + 6].saved_csr = csr >> 7;
1779                 csr &= 0x7f;
1780         }
1781         if ((csr & 0x3f) == 0)
1782                 return 0;
1783         if (unlikely(dma_chan[ch].dev_id == -1)) {
1784                 printk(KERN_WARNING "Spurious interrupt from DMA channel "
1785                        "%d (CSR %04x)\n", ch, csr);
1786                 return 0;
1787         }
1788         if (unlikely(csr & OMAP1_DMA_TOUT_IRQ))
1789                 printk(KERN_WARNING "DMA timeout with device %d\n",
1790                        dma_chan[ch].dev_id);
1791         if (unlikely(csr & OMAP_DMA_DROP_IRQ))
1792                 printk(KERN_WARNING "DMA synchronization event drop occurred "
1793                        "with device %d\n", dma_chan[ch].dev_id);
1794         if (likely(csr & OMAP_DMA_BLOCK_IRQ))
1795                 dma_chan[ch].flags &= ~OMAP_DMA_ACTIVE;
1796         if (likely(dma_chan[ch].callback != NULL))
1797                 dma_chan[ch].callback(ch, csr, dma_chan[ch].data);
1798
1799         return 1;
1800 }
1801
1802 static irqreturn_t omap1_dma_irq_handler(int irq, void *dev_id)
1803 {
1804         int ch = ((int) dev_id) - 1;
1805         int handled = 0;
1806
1807         for (;;) {
1808                 int handled_now = 0;
1809
1810                 handled_now += omap1_dma_handle_ch(ch);
1811                 if (enable_1510_mode && dma_chan[ch + 6].saved_csr)
1812                         handled_now += omap1_dma_handle_ch(ch + 6);
1813                 if (!handled_now)
1814                         break;
1815                 handled += handled_now;
1816         }
1817
1818         return handled ? IRQ_HANDLED : IRQ_NONE;
1819 }
1820
1821 #else
1822 #define omap1_dma_irq_handler   NULL
1823 #endif
1824
1825 #if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3)
1826
1827 static int omap2_dma_handle_ch(int ch)
1828 {
1829         u32 status = dma_read(CSR(ch));
1830
1831         if (!status) {
1832                 if (printk_ratelimit())
1833                         printk(KERN_WARNING "Spurious DMA IRQ for lch %d\n",
1834                                 ch);
1835                 dma_write(1 << ch, IRQSTATUS_L0);
1836                 return 0;
1837         }
1838         if (unlikely(dma_chan[ch].dev_id == -1)) {
1839                 if (printk_ratelimit())
1840                         printk(KERN_WARNING "IRQ %04x for non-allocated DMA"
1841                                         "channel %d\n", status, ch);
1842                 return 0;
1843         }
1844         if (unlikely(status & OMAP_DMA_DROP_IRQ))
1845                 printk(KERN_INFO
1846                        "DMA synchronization event drop occurred with device "
1847                        "%d\n", dma_chan[ch].dev_id);
1848         if (unlikely(status & OMAP2_DMA_TRANS_ERR_IRQ)) {
1849                 printk(KERN_INFO "DMA transaction error with device %d\n",
1850                        dma_chan[ch].dev_id);
1851                 if (cpu_class_is_omap2()) {
1852                         /* Errata: sDMA Channel is not disabled
1853                          * after a transaction error. So we explicitely
1854                          * disable the channel
1855                          */
1856                         u32 ccr;
1857
1858                         ccr = dma_read(CCR(ch));
1859                         ccr &= ~OMAP_DMA_CCR_EN;
1860                         dma_write(ccr, CCR(ch));
1861                         dma_chan[ch].flags &= ~OMAP_DMA_ACTIVE;
1862                 }
1863         }
1864         if (unlikely(status & OMAP2_DMA_SECURE_ERR_IRQ))
1865                 printk(KERN_INFO "DMA secure error with device %d\n",
1866                        dma_chan[ch].dev_id);
1867         if (unlikely(status & OMAP2_DMA_MISALIGNED_ERR_IRQ))
1868                 printk(KERN_INFO "DMA misaligned error with device %d\n",
1869                        dma_chan[ch].dev_id);
1870
1871         dma_write(OMAP2_DMA_CSR_CLEAR_MASK, CSR(ch));
1872         dma_write(1 << ch, IRQSTATUS_L0);
1873
1874         /* If the ch is not chained then chain_id will be -1 */
1875         if (dma_chan[ch].chain_id != -1) {
1876                 int chain_id = dma_chan[ch].chain_id;
1877                 dma_chan[ch].state = DMA_CH_NOTSTARTED;
1878                 if (dma_read(CLNK_CTRL(ch)) & (1 << 15))
1879                         dma_chan[dma_chan[ch].next_linked_ch].state =
1880                                                         DMA_CH_STARTED;
1881                 if (dma_linked_lch[chain_id].chain_mode ==
1882                                                 OMAP_DMA_DYNAMIC_CHAIN)
1883                         disable_lnk(ch);
1884
1885                 if (!OMAP_DMA_CHAIN_QEMPTY(chain_id))
1886                         OMAP_DMA_CHAIN_INCQHEAD(chain_id);
1887
1888                 status = dma_read(CSR(ch));
1889         }
1890
1891         if (likely(dma_chan[ch].callback != NULL))
1892                 dma_chan[ch].callback(ch, status, dma_chan[ch].data);
1893
1894         dma_write(status, CSR(ch));
1895
1896         return 0;
1897 }
1898
1899 /* STATUS register count is from 1-32 while our is 0-31 */
1900 static irqreturn_t omap2_dma_irq_handler(int irq, void *dev_id)
1901 {
1902         u32 val;
1903         int i;
1904
1905         val = dma_read(IRQSTATUS_L0);
1906         if (val == 0) {
1907                 if (printk_ratelimit())
1908                         printk(KERN_WARNING "Spurious DMA IRQ\n");
1909                 return IRQ_HANDLED;
1910         }
1911         for (i = 0; i < dma_lch_count && val != 0; i++) {
1912                 if (val & 1)
1913                         omap2_dma_handle_ch(i);
1914                 val >>= 1;
1915         }
1916
1917         return IRQ_HANDLED;
1918 }
1919
1920 static struct irqaction omap24xx_dma_irq = {
1921         .name = "DMA",
1922         .handler = omap2_dma_irq_handler,
1923         .flags = IRQF_DISABLED
1924 };
1925
1926 #else
1927 static struct irqaction omap24xx_dma_irq;
1928 #endif
1929
1930 /*----------------------------------------------------------------------------*/
1931
1932 static struct lcd_dma_info {
1933         spinlock_t lock;
1934         int reserved;
1935         void (*callback)(u16 status, void *data);
1936         void *cb_data;
1937
1938         int active;
1939         unsigned long addr, size;
1940         int rotate, data_type, xres, yres;
1941         int vxres;
1942         int mirror;
1943         int xscale, yscale;
1944         int ext_ctrl;
1945         int src_port;
1946         int single_transfer;
1947 } lcd_dma;
1948
1949 void omap_set_lcd_dma_b1(unsigned long addr, u16 fb_xres, u16 fb_yres,
1950                          int data_type)
1951 {
1952         lcd_dma.addr = addr;
1953         lcd_dma.data_type = data_type;
1954         lcd_dma.xres = fb_xres;
1955         lcd_dma.yres = fb_yres;
1956 }
1957 EXPORT_SYMBOL(omap_set_lcd_dma_b1);
1958
1959 void omap_set_lcd_dma_src_port(int port)
1960 {
1961         lcd_dma.src_port = port;
1962 }
1963
1964 void omap_set_lcd_dma_ext_controller(int external)
1965 {
1966         lcd_dma.ext_ctrl = external;
1967 }
1968 EXPORT_SYMBOL(omap_set_lcd_dma_ext_controller);
1969
1970 void omap_set_lcd_dma_single_transfer(int single)
1971 {
1972         lcd_dma.single_transfer = single;
1973 }
1974 EXPORT_SYMBOL(omap_set_lcd_dma_single_transfer);
1975
1976 void omap_set_lcd_dma_b1_rotation(int rotate)
1977 {
1978         if (omap_dma_in_1510_mode()) {
1979                 printk(KERN_ERR "DMA rotation is not supported in 1510 mode\n");
1980                 BUG();
1981                 return;
1982         }
1983         lcd_dma.rotate = rotate;
1984 }
1985 EXPORT_SYMBOL(omap_set_lcd_dma_b1_rotation);
1986
1987 void omap_set_lcd_dma_b1_mirror(int mirror)
1988 {
1989         if (omap_dma_in_1510_mode()) {
1990                 printk(KERN_ERR "DMA mirror is not supported in 1510 mode\n");
1991                 BUG();
1992         }
1993         lcd_dma.mirror = mirror;
1994 }
1995 EXPORT_SYMBOL(omap_set_lcd_dma_b1_mirror);
1996
1997 void omap_set_lcd_dma_b1_vxres(unsigned long vxres)
1998 {
1999         if (omap_dma_in_1510_mode()) {
2000                 printk(KERN_ERR "DMA virtual resulotion is not supported "
2001                                 "in 1510 mode\n");
2002                 BUG();
2003         }
2004         lcd_dma.vxres = vxres;
2005 }
2006 EXPORT_SYMBOL(omap_set_lcd_dma_b1_vxres);
2007
2008 void omap_set_lcd_dma_b1_scale(unsigned int xscale, unsigned int yscale)
2009 {
2010         if (omap_dma_in_1510_mode()) {
2011                 printk(KERN_ERR "DMA scale is not supported in 1510 mode\n");
2012                 BUG();
2013         }
2014         lcd_dma.xscale = xscale;
2015         lcd_dma.yscale = yscale;
2016 }
2017 EXPORT_SYMBOL(omap_set_lcd_dma_b1_scale);
2018
2019 static void set_b1_regs(void)
2020 {
2021         unsigned long top, bottom;
2022         int es;
2023         u16 w;
2024         unsigned long en, fn;
2025         long ei, fi;
2026         unsigned long vxres;
2027         unsigned int xscale, yscale;
2028
2029         switch (lcd_dma.data_type) {
2030         case OMAP_DMA_DATA_TYPE_S8:
2031                 es = 1;
2032                 break;
2033         case OMAP_DMA_DATA_TYPE_S16:
2034                 es = 2;
2035                 break;
2036         case OMAP_DMA_DATA_TYPE_S32:
2037                 es = 4;
2038                 break;
2039         default:
2040                 BUG();
2041                 return;
2042         }
2043
2044         vxres = lcd_dma.vxres ? lcd_dma.vxres : lcd_dma.xres;
2045         xscale = lcd_dma.xscale ? lcd_dma.xscale : 1;
2046         yscale = lcd_dma.yscale ? lcd_dma.yscale : 1;
2047         BUG_ON(vxres < lcd_dma.xres);
2048
2049 #define PIXADDR(x, y) (lcd_dma.addr +                                   \
2050                 ((y) * vxres * yscale + (x) * xscale) * es)
2051 #define PIXSTEP(sx, sy, dx, dy) (PIXADDR(dx, dy) - PIXADDR(sx, sy) - es + 1)
2052
2053         switch (lcd_dma.rotate) {
2054         case 0:
2055                 if (!lcd_dma.mirror) {
2056                         top = PIXADDR(0, 0);
2057                         bottom = PIXADDR(lcd_dma.xres - 1, lcd_dma.yres - 1);
2058                         /* 1510 DMA requires the bottom address to be 2 more
2059                          * than the actual last memory access location. */
2060                         if (omap_dma_in_1510_mode() &&
2061                                 lcd_dma.data_type == OMAP_DMA_DATA_TYPE_S32)
2062                                         bottom += 2;
2063                         ei = PIXSTEP(0, 0, 1, 0);
2064                         fi = PIXSTEP(lcd_dma.xres - 1, 0, 0, 1);
2065                 } else {
2066                         top = PIXADDR(lcd_dma.xres - 1, 0);
2067                         bottom = PIXADDR(0, lcd_dma.yres - 1);
2068                         ei = PIXSTEP(1, 0, 0, 0);
2069                         fi = PIXSTEP(0, 0, lcd_dma.xres - 1, 1);
2070                 }
2071                 en = lcd_dma.xres;
2072                 fn = lcd_dma.yres;
2073                 break;
2074         case 90:
2075                 if (!lcd_dma.mirror) {
2076                         top = PIXADDR(0, lcd_dma.yres - 1);
2077                         bottom = PIXADDR(lcd_dma.xres - 1, 0);
2078                         ei = PIXSTEP(0, 1, 0, 0);
2079                         fi = PIXSTEP(0, 0, 1, lcd_dma.yres - 1);
2080                 } else {
2081                         top = PIXADDR(lcd_dma.xres - 1, lcd_dma.yres - 1);
2082                         bottom = PIXADDR(0, 0);
2083                         ei = PIXSTEP(0, 1, 0, 0);
2084                         fi = PIXSTEP(1, 0, 0, lcd_dma.yres - 1);
2085                 }
2086                 en = lcd_dma.yres;
2087                 fn = lcd_dma.xres;
2088                 break;
2089         case 180:
2090                 if (!lcd_dma.mirror) {
2091                         top = PIXADDR(lcd_dma.xres - 1, lcd_dma.yres - 1);
2092                         bottom = PIXADDR(0, 0);
2093                         ei = PIXSTEP(1, 0, 0, 0);
2094                         fi = PIXSTEP(0, 1, lcd_dma.xres - 1, 0);
2095                 } else {
2096                         top = PIXADDR(0, lcd_dma.yres - 1);
2097                         bottom = PIXADDR(lcd_dma.xres - 1, 0);
2098                         ei = PIXSTEP(0, 0, 1, 0);
2099                         fi = PIXSTEP(lcd_dma.xres - 1, 1, 0, 0);
2100                 }
2101                 en = lcd_dma.xres;
2102                 fn = lcd_dma.yres;
2103                 break;
2104         case 270:
2105                 if (!lcd_dma.mirror) {
2106                         top = PIXADDR(lcd_dma.xres - 1, 0);
2107                         bottom = PIXADDR(0, lcd_dma.yres - 1);
2108                         ei = PIXSTEP(0, 0, 0, 1);
2109                         fi = PIXSTEP(1, lcd_dma.yres - 1, 0, 0);
2110                 } else {
2111                         top = PIXADDR(0, 0);
2112                         bottom = PIXADDR(lcd_dma.xres - 1, lcd_dma.yres - 1);
2113                         ei = PIXSTEP(0, 0, 0, 1);
2114                         fi = PIXSTEP(0, lcd_dma.yres - 1, 1, 0);
2115                 }
2116                 en = lcd_dma.yres;
2117                 fn = lcd_dma.xres;
2118                 break;
2119         default:
2120                 BUG();
2121                 return; /* Suppress warning about uninitialized vars */
2122         }
2123
2124         if (omap_dma_in_1510_mode()) {
2125                 omap_writew(top >> 16, OMAP1510_DMA_LCD_TOP_F1_U);
2126                 omap_writew(top, OMAP1510_DMA_LCD_TOP_F1_L);
2127                 omap_writew(bottom >> 16, OMAP1510_DMA_LCD_BOT_F1_U);
2128                 omap_writew(bottom, OMAP1510_DMA_LCD_BOT_F1_L);
2129
2130                 return;
2131         }
2132
2133         /* 1610 regs */
2134         omap_writew(top >> 16, OMAP1610_DMA_LCD_TOP_B1_U);
2135         omap_writew(top, OMAP1610_DMA_LCD_TOP_B1_L);
2136         omap_writew(bottom >> 16, OMAP1610_DMA_LCD_BOT_B1_U);
2137         omap_writew(bottom, OMAP1610_DMA_LCD_BOT_B1_L);
2138
2139         omap_writew(en, OMAP1610_DMA_LCD_SRC_EN_B1);
2140         omap_writew(fn, OMAP1610_DMA_LCD_SRC_FN_B1);
2141
2142         w = omap_readw(OMAP1610_DMA_LCD_CSDP);
2143         w &= ~0x03;
2144         w |= lcd_dma.data_type;
2145         omap_writew(w, OMAP1610_DMA_LCD_CSDP);
2146
2147         w = omap_readw(OMAP1610_DMA_LCD_CTRL);
2148         /* Always set the source port as SDRAM for now*/
2149         w &= ~(0x03 << 6);
2150         if (lcd_dma.callback != NULL)
2151                 w |= 1 << 1;            /* Block interrupt enable */
2152         else
2153                 w &= ~(1 << 1);
2154         omap_writew(w, OMAP1610_DMA_LCD_CTRL);
2155
2156         if (!(lcd_dma.rotate || lcd_dma.mirror ||
2157               lcd_dma.vxres || lcd_dma.xscale || lcd_dma.yscale))
2158                 return;
2159
2160         w = omap_readw(OMAP1610_DMA_LCD_CCR);
2161         /* Set the double-indexed addressing mode */
2162         w |= (0x03 << 12);
2163         omap_writew(w, OMAP1610_DMA_LCD_CCR);
2164
2165         omap_writew(ei, OMAP1610_DMA_LCD_SRC_EI_B1);
2166         omap_writew(fi >> 16, OMAP1610_DMA_LCD_SRC_FI_B1_U);
2167         omap_writew(fi, OMAP1610_DMA_LCD_SRC_FI_B1_L);
2168 }
2169
2170 static irqreturn_t lcd_dma_irq_handler(int irq, void *dev_id)
2171 {
2172         u16 w;
2173
2174         w = omap_readw(OMAP1610_DMA_LCD_CTRL);
2175         if (unlikely(!(w & (1 << 3)))) {
2176                 printk(KERN_WARNING "Spurious LCD DMA IRQ\n");
2177                 return IRQ_NONE;
2178         }
2179         /* Ack the IRQ */
2180         w |= (1 << 3);
2181         omap_writew(w, OMAP1610_DMA_LCD_CTRL);
2182         lcd_dma.active = 0;
2183         if (lcd_dma.callback != NULL)
2184                 lcd_dma.callback(w, lcd_dma.cb_data);
2185
2186         return IRQ_HANDLED;
2187 }
2188
2189 int omap_request_lcd_dma(void (*callback)(u16 status, void *data),
2190                          void *data)
2191 {
2192         spin_lock_irq(&lcd_dma.lock);
2193         if (lcd_dma.reserved) {
2194                 spin_unlock_irq(&lcd_dma.lock);
2195                 printk(KERN_ERR "LCD DMA channel already reserved\n");
2196                 BUG();
2197                 return -EBUSY;
2198         }
2199         lcd_dma.reserved = 1;
2200         spin_unlock_irq(&lcd_dma.lock);
2201         lcd_dma.callback = callback;
2202         lcd_dma.cb_data = data;
2203         lcd_dma.active = 0;
2204         lcd_dma.single_transfer = 0;
2205         lcd_dma.rotate = 0;
2206         lcd_dma.vxres = 0;
2207         lcd_dma.mirror = 0;
2208         lcd_dma.xscale = 0;
2209         lcd_dma.yscale = 0;
2210         lcd_dma.ext_ctrl = 0;
2211         lcd_dma.src_port = 0;
2212
2213         return 0;
2214 }
2215 EXPORT_SYMBOL(omap_request_lcd_dma);
2216
2217 void omap_free_lcd_dma(void)
2218 {
2219         spin_lock(&lcd_dma.lock);
2220         if (!lcd_dma.reserved) {
2221                 spin_unlock(&lcd_dma.lock);
2222                 printk(KERN_ERR "LCD DMA is not reserved\n");
2223                 BUG();
2224                 return;
2225         }
2226         if (!enable_1510_mode)
2227                 omap_writew(omap_readw(OMAP1610_DMA_LCD_CCR) & ~1,
2228                             OMAP1610_DMA_LCD_CCR);
2229         lcd_dma.reserved = 0;
2230         spin_unlock(&lcd_dma.lock);
2231 }
2232 EXPORT_SYMBOL(omap_free_lcd_dma);
2233
2234 void omap_enable_lcd_dma(void)
2235 {
2236         u16 w;
2237
2238         /*
2239          * Set the Enable bit only if an external controller is
2240          * connected. Otherwise the OMAP internal controller will
2241          * start the transfer when it gets enabled.
2242          */
2243         if (enable_1510_mode || !lcd_dma.ext_ctrl)
2244                 return;
2245
2246         w = omap_readw(OMAP1610_DMA_LCD_CTRL);
2247         w |= 1 << 8;
2248         omap_writew(w, OMAP1610_DMA_LCD_CTRL);
2249
2250         lcd_dma.active = 1;
2251
2252         w = omap_readw(OMAP1610_DMA_LCD_CCR);
2253         w |= 1 << 7;
2254         omap_writew(w, OMAP1610_DMA_LCD_CCR);
2255 }
2256 EXPORT_SYMBOL(omap_enable_lcd_dma);
2257
2258 void omap_setup_lcd_dma(void)
2259 {
2260         BUG_ON(lcd_dma.active);
2261         if (!enable_1510_mode) {
2262                 /* Set some reasonable defaults */
2263                 omap_writew(0x5440, OMAP1610_DMA_LCD_CCR);
2264                 omap_writew(0x9102, OMAP1610_DMA_LCD_CSDP);
2265                 omap_writew(0x0004, OMAP1610_DMA_LCD_LCH_CTRL);
2266         }
2267         set_b1_regs();
2268         if (!enable_1510_mode) {
2269                 u16 w;
2270
2271                 w = omap_readw(OMAP1610_DMA_LCD_CCR);
2272                 /*
2273                  * If DMA was already active set the end_prog bit to have
2274                  * the programmed register set loaded into the active
2275                  * register set.
2276                  */
2277                 w |= 1 << 11;           /* End_prog */
2278                 if (!lcd_dma.single_transfer)
2279                         w |= (3 << 8);  /* Auto_init, repeat */
2280                 omap_writew(w, OMAP1610_DMA_LCD_CCR);
2281         }
2282 }
2283 EXPORT_SYMBOL(omap_setup_lcd_dma);
2284
2285 void omap_stop_lcd_dma(void)
2286 {
2287         u16 w;
2288
2289         lcd_dma.active = 0;
2290         if (enable_1510_mode || !lcd_dma.ext_ctrl)
2291                 return;
2292
2293         w = omap_readw(OMAP1610_DMA_LCD_CCR);
2294         w &= ~(1 << 7);
2295         omap_writew(w, OMAP1610_DMA_LCD_CCR);
2296
2297         w = omap_readw(OMAP1610_DMA_LCD_CTRL);
2298         w &= ~(1 << 8);
2299         omap_writew(w, OMAP1610_DMA_LCD_CTRL);
2300 }
2301 EXPORT_SYMBOL(omap_stop_lcd_dma);
2302
2303 /*----------------------------------------------------------------------------*/
2304
2305 static int __init omap_init_dma(void)
2306 {
2307         int ch, r;
2308
2309         if (cpu_class_is_omap1()) {
2310                 omap_dma_base = IO_ADDRESS(OMAP1_DMA_BASE);
2311                 dma_lch_count = OMAP1_LOGICAL_DMA_CH_COUNT;
2312         } else if (cpu_is_omap24xx()) {
2313                 omap_dma_base = IO_ADDRESS(OMAP24XX_DMA4_BASE);
2314                 dma_lch_count = OMAP_DMA4_LOGICAL_DMA_CH_COUNT;
2315         } else if (cpu_is_omap34xx()) {
2316                 omap_dma_base = IO_ADDRESS(OMAP34XX_DMA4_BASE);
2317                 dma_lch_count = OMAP_DMA4_LOGICAL_DMA_CH_COUNT;
2318         } else {
2319                 pr_err("DMA init failed for unsupported omap\n");
2320                 return -ENODEV;
2321         }
2322
2323         dma_chan = kzalloc(sizeof(struct omap_dma_lch) * dma_lch_count,
2324                                 GFP_KERNEL);
2325         if (!dma_chan)
2326                 return -ENOMEM;
2327
2328         if (cpu_class_is_omap2()) {
2329                 dma_linked_lch = kzalloc(sizeof(struct dma_link_info) *
2330                                                 dma_lch_count, GFP_KERNEL);
2331                 if (!dma_linked_lch) {
2332                         kfree(dma_chan);
2333                         return -ENOMEM;
2334                 }
2335         }
2336
2337         if (cpu_is_omap15xx()) {
2338                 printk(KERN_INFO "DMA support for OMAP15xx initialized\n");
2339                 dma_chan_count = 9;
2340                 enable_1510_mode = 1;
2341         } else if (cpu_is_omap16xx() || cpu_is_omap730()) {
2342                 printk(KERN_INFO "OMAP DMA hardware version %d\n",
2343                        dma_read(HW_ID));
2344                 printk(KERN_INFO "DMA capabilities: %08x:%08x:%04x:%04x:%04x\n",
2345                        (dma_read(CAPS_0_U) << 16) |
2346                        dma_read(CAPS_0_L),
2347                        (dma_read(CAPS_1_U) << 16) |
2348                        dma_read(CAPS_1_L),
2349                        dma_read(CAPS_2), dma_read(CAPS_3),
2350                        dma_read(CAPS_4));
2351                 if (!enable_1510_mode) {
2352                         u16 w;
2353
2354                         /* Disable OMAP 3.0/3.1 compatibility mode. */
2355                         w = dma_read(GSCR);
2356                         w |= 1 << 3;
2357                         dma_write(w, GSCR);
2358                         dma_chan_count = 16;
2359                 } else
2360                         dma_chan_count = 9;
2361                 if (cpu_is_omap16xx()) {
2362                         u16 w;
2363
2364                         /* this would prevent OMAP sleep */
2365                         w = omap_readw(OMAP1610_DMA_LCD_CTRL);
2366                         w &= ~(1 << 8);
2367                         omap_writew(w, OMAP1610_DMA_LCD_CTRL);
2368                 }
2369         } else if (cpu_class_is_omap2()) {
2370                 u8 revision = dma_read(REVISION) & 0xff;
2371                 printk(KERN_INFO "OMAP DMA hardware revision %d.%d\n",
2372                        revision >> 4, revision & 0xf);
2373                 dma_chan_count = OMAP_DMA4_LOGICAL_DMA_CH_COUNT;
2374         } else {
2375                 dma_chan_count = 0;
2376                 return 0;
2377         }
2378
2379         spin_lock_init(&lcd_dma.lock);
2380         spin_lock_init(&dma_chan_lock);
2381
2382         for (ch = 0; ch < dma_chan_count; ch++) {
2383                 omap_clear_dma(ch);
2384                 dma_chan[ch].dev_id = -1;
2385                 dma_chan[ch].next_lch = -1;
2386
2387                 if (ch >= 6 && enable_1510_mode)
2388                         continue;
2389
2390                 if (cpu_class_is_omap1()) {
2391                         /*
2392                          * request_irq() doesn't like dev_id (ie. ch) being
2393                          * zero, so we have to kludge around this.
2394                          */
2395                         r = request_irq(omap1_dma_irq[ch],
2396                                         omap1_dma_irq_handler, 0, "DMA",
2397                                         (void *) (ch + 1));
2398                         if (r != 0) {
2399                                 int i;
2400
2401                                 printk(KERN_ERR "unable to request IRQ %d "
2402                                        "for DMA (error %d)\n",
2403                                        omap1_dma_irq[ch], r);
2404                                 for (i = 0; i < ch; i++)
2405                                         free_irq(omap1_dma_irq[i],
2406                                                  (void *) (i + 1));
2407                                 return r;
2408                         }
2409                 }
2410         }
2411
2412         if (cpu_is_omap2430() || cpu_is_omap34xx())
2413                 omap_dma_set_global_params(DMA_DEFAULT_ARB_RATE,
2414                                 DMA_DEFAULT_FIFO_DEPTH, 0);
2415
2416         if (cpu_class_is_omap2())
2417                 setup_irq(INT_24XX_SDMA_IRQ0, &omap24xx_dma_irq);
2418
2419         /* FIXME: Update LCD DMA to work on 24xx */
2420         if (cpu_class_is_omap1()) {
2421                 r = request_irq(INT_DMA_LCD, lcd_dma_irq_handler, 0,
2422                                 "LCD DMA", NULL);
2423                 if (r != 0) {
2424                         int i;
2425
2426                         printk(KERN_ERR "unable to request IRQ for LCD DMA "
2427                                "(error %d)\n", r);
2428                         for (i = 0; i < dma_chan_count; i++)
2429                                 free_irq(omap1_dma_irq[i], (void *) (i + 1));
2430                         return r;
2431                 }
2432         }
2433
2434         return 0;
2435 }
2436
2437 arch_initcall(omap_init_dma);
2438
2439