git.oblomov.eu Git - linux-2.6/blob - drivers/char/synclinkmp.c

   1 /*
   2  * $Id: synclinkmp.c,v 4.38 2005/07/15 13:29:44 paulkf Exp $
   3  *
   4  * Device driver for Microgate SyncLink Multiport
   5  * high speed multiprotocol serial adapter.
   6  *
   7  * written by Paul Fulghum for Microgate Corporation
   8  * paulkf@microgate.com
   9  *
  10  * Microgate and SyncLink are trademarks of Microgate Corporation
  11  *
  12  * Derived from serial.c written by Theodore Ts'o and Linus Torvalds
  13  * This code is released under the GNU General Public License (GPL)
  14  *
  15  * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
  16  * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
  17  * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
  18  * DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT,
  19  * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
  20  * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
  21  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
  22  * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
  23  * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
  24  * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
  25  * OF THE POSSIBILITY OF SUCH DAMAGE.
  26  */
  27
  28 #define VERSION(ver,rel,seq) (((ver)<<16) | ((rel)<<8) | (seq))
  29 #if defined(__i386__)
  30 #  define BREAKPOINT() asm("   int $3");
  31 #else
  32 #  define BREAKPOINT() { }
  33 #endif
  34
  35 #define MAX_DEVICES 12
  36
  37 #include <linux/module.h>
  38 #include <linux/errno.h>
  39 #include <linux/signal.h>
  40 #include <linux/sched.h>
  41 #include <linux/timer.h>
  42 #include <linux/interrupt.h>
  43 #include <linux/pci.h>
  44 #include <linux/tty.h>
  45 #include <linux/tty_flip.h>
  46 #include <linux/serial.h>
  47 #include <linux/major.h>
  48 #include <linux/string.h>
  49 #include <linux/fcntl.h>
  50 #include <linux/ptrace.h>
  51 #include <linux/ioport.h>
  52 #include <linux/mm.h>
  53 #include <linux/slab.h>
  54 #include <linux/netdevice.h>
  55 #include <linux/vmalloc.h>
  56 #include <linux/init.h>
  57 #include <linux/delay.h>
  58 #include <linux/ioctl.h>
  59
  60 #include <asm/system.h>
  61 #include <asm/io.h>
  62 #include <asm/irq.h>
  63 #include <asm/dma.h>
  64 #include <linux/bitops.h>
  65 #include <asm/types.h>
  66 #include <linux/termios.h>
  67 #include <linux/workqueue.h>
  68 #include <linux/hdlc.h>
  69 #include <linux/synclink.h>
  70
  71 #if defined(CONFIG_HDLC) || (defined(CONFIG_HDLC_MODULE) && defined(CONFIG_SYNCLINKMP_MODULE))
  72 #define SYNCLINK_GENERIC_HDLC 1
  73 #else
  74 #define SYNCLINK_GENERIC_HDLC 0
  75 #endif
  76
  77 #define GET_USER(error,value,addr) error = get_user(value,addr)
  78 #define COPY_FROM_USER(error,dest,src,size) error = copy_from_user(dest,src,size) ? -EFAULT : 0
  79 #define PUT_USER(error,value,addr) error = put_user(value,addr)
  80 #define COPY_TO_USER(error,dest,src,size) error = copy_to_user(dest,src,size) ? -EFAULT : 0
  81
  82 #include <asm/uaccess.h>
  83
  84 static MGSL_PARAMS default_params = {
  85         MGSL_MODE_HDLC,                 /* unsigned long mode */
  86         0,                              /* unsigned char loopback; */
  87         HDLC_FLAG_UNDERRUN_ABORT15,     /* unsigned short flags; */
  88         HDLC_ENCODING_NRZI_SPACE,       /* unsigned char encoding; */
  89         0,                              /* unsigned long clock_speed; */
  90         0xff,                           /* unsigned char addr_filter; */
  91         HDLC_CRC_16_CCITT,              /* unsigned short crc_type; */
  92         HDLC_PREAMBLE_LENGTH_8BITS,     /* unsigned char preamble_length; */
  93         HDLC_PREAMBLE_PATTERN_NONE,     /* unsigned char preamble; */
  94         9600,                           /* unsigned long data_rate; */
  95         8,                              /* unsigned char data_bits; */
  96         1,                              /* unsigned char stop_bits; */
  97         ASYNC_PARITY_NONE               /* unsigned char parity; */
  98 };
  99
 100 /* size in bytes of DMA data buffers */
 101 #define SCABUFSIZE      1024
 102 #define SCA_MEM_SIZE    0x40000
 103 #define SCA_BASE_SIZE   512
 104 #define SCA_REG_SIZE    16
 105 #define SCA_MAX_PORTS   4
 106 #define SCAMAXDESC      128
 107
 108 #define BUFFERLISTSIZE  4096
 109
 110 /* SCA-I style DMA buffer descriptor */
 111 typedef struct _SCADESC
 112 {
 113         u16     next;           /* lower l6 bits of next descriptor addr */
 114         u16     buf_ptr;        /* lower 16 bits of buffer addr */
 115         u8      buf_base;       /* upper 8 bits of buffer addr */
 116         u8      pad1;
 117         u16     length;         /* length of buffer */
 118         u8      status;         /* status of buffer */
 119         u8      pad2;
 120 } SCADESC, *PSCADESC;
 121
 122 typedef struct _SCADESC_EX
 123 {
 124         /* device driver bookkeeping section */
 125         char    *virt_addr;     /* virtual address of data buffer */
 126         u16     phys_entry;     /* lower 16-bits of physical address of this descriptor */
 127 } SCADESC_EX, *PSCADESC_EX;
 128
 129 /* The queue of BH actions to be performed */
 130
 131 #define BH_RECEIVE  1
 132 #define BH_TRANSMIT 2
 133 #define BH_STATUS   4
 134
 135 #define IO_PIN_SHUTDOWN_LIMIT 100
 136
 137 struct  _input_signal_events {
 138         int     ri_up;
 139         int     ri_down;
 140         int     dsr_up;
 141         int     dsr_down;
 142         int     dcd_up;
 143         int     dcd_down;
 144         int     cts_up;
 145         int     cts_down;
 146 };
 147
 148 /*
 149  * Device instance data structure
 150  */
 151 typedef struct _synclinkmp_info {
 152         void *if_ptr;                           /* General purpose pointer (used by SPPP) */
 153         int                     magic;
 154         struct tty_port         port;
 155         int                     line;
 156         unsigned short          close_delay;
 157         unsigned short          closing_wait;   /* time to wait before closing */
 158
 159         struct mgsl_icount      icount;
 160
 161         int                     timeout;
 162         int                     x_char;         /* xon/xoff character */
 163         u16                     read_status_mask1;  /* break detection (SR1 indications) */
 164         u16                     read_status_mask2;  /* parity/framing/overun (SR2 indications) */
 165         unsigned char           ignore_status_mask1;  /* break detection (SR1 indications) */
 166         unsigned char           ignore_status_mask2;  /* parity/framing/overun (SR2 indications) */
 167         unsigned char           *tx_buf;
 168         int                     tx_put;
 169         int                     tx_get;
 170         int                     tx_count;
 171
 172         wait_queue_head_t       status_event_wait_q;
 173         wait_queue_head_t       event_wait_q;
 174         struct timer_list       tx_timer;       /* HDLC transmit timeout timer */
 175         struct _synclinkmp_info *next_device;   /* device list link */
 176         struct timer_list       status_timer;   /* input signal status check timer */
 177
 178         spinlock_t lock;                /* spinlock for synchronizing with ISR */
 179         struct work_struct task;                        /* task structure for scheduling bh */
 180
 181         u32 max_frame_size;                     /* as set by device config */
 182
 183         u32 pending_bh;
 184
 185         bool bh_running;                                /* Protection from multiple */
 186         int isr_overflow;
 187         bool bh_requested;
 188
 189         int dcd_chkcount;                       /* check counts to prevent */
 190         int cts_chkcount;                       /* too many IRQs if a signal */
 191         int dsr_chkcount;                       /* is floating */
 192         int ri_chkcount;
 193
 194         char *buffer_list;                      /* virtual address of Rx & Tx buffer lists */
 195         unsigned long buffer_list_phys;
 196
 197         unsigned int rx_buf_count;              /* count of total allocated Rx buffers */
 198         SCADESC *rx_buf_list;                   /* list of receive buffer entries */
 199         SCADESC_EX rx_buf_list_ex[SCAMAXDESC]; /* list of receive buffer entries */
 200         unsigned int current_rx_buf;
 201
 202         unsigned int tx_buf_count;              /* count of total allocated Tx buffers */
 203         SCADESC *tx_buf_list;           /* list of transmit buffer entries */
 204         SCADESC_EX tx_buf_list_ex[SCAMAXDESC]; /* list of transmit buffer entries */
 205         unsigned int last_tx_buf;
 206
 207         unsigned char *tmp_rx_buf;
 208         unsigned int tmp_rx_buf_count;
 209
 210         bool rx_enabled;
 211         bool rx_overflow;
 212
 213         bool tx_enabled;
 214         bool tx_active;
 215         u32 idle_mode;
 216
 217         unsigned char ie0_value;
 218         unsigned char ie1_value;
 219         unsigned char ie2_value;
 220         unsigned char ctrlreg_value;
 221         unsigned char old_signals;
 222
 223         char device_name[25];                   /* device instance name */
 224
 225         int port_count;
 226         int adapter_num;
 227         int port_num;
 228
 229         struct _synclinkmp_info *port_array[SCA_MAX_PORTS];
 230
 231         unsigned int bus_type;                  /* expansion bus type (ISA,EISA,PCI) */
 232
 233         unsigned int irq_level;                 /* interrupt level */
 234         unsigned long irq_flags;
 235         bool irq_requested;                     /* true if IRQ requested */
 236
 237         MGSL_PARAMS params;                     /* communications parameters */
 238
 239         unsigned char serial_signals;           /* current serial signal states */
 240
 241         bool irq_occurred;                      /* for diagnostics use */
 242         unsigned int init_error;                /* Initialization startup error */
 243
 244         u32 last_mem_alloc;
 245         unsigned char* memory_base;             /* shared memory address (PCI only) */
 246         u32 phys_memory_base;
 247         int shared_mem_requested;
 248
 249         unsigned char* sca_base;                /* HD64570 SCA Memory address */
 250         u32 phys_sca_base;
 251         u32 sca_offset;
 252         bool sca_base_requested;
 253
 254         unsigned char* lcr_base;                /* local config registers (PCI only) */
 255         u32 phys_lcr_base;
 256         u32 lcr_offset;
 257         int lcr_mem_requested;
 258
 259         unsigned char* statctrl_base;           /* status/control register memory */
 260         u32 phys_statctrl_base;
 261         u32 statctrl_offset;
 262         bool sca_statctrl_requested;
 263
 264         u32 misc_ctrl_value;
 265         char flag_buf[MAX_ASYNC_BUFFER_SIZE];
 266         char char_buf[MAX_ASYNC_BUFFER_SIZE];
 267         bool drop_rts_on_tx_done;
 268
 269         struct  _input_signal_events    input_signal_events;
 270
 271         /* SPPP/Cisco HDLC device parts */
 272         int netcount;
 273         spinlock_t netlock;
 274
 275 #if SYNCLINK_GENERIC_HDLC
 276         struct net_device *netdev;
 277 #endif
 278
 279 } SLMP_INFO;
 280
 281 #define MGSL_MAGIC 0x5401
 282
 283 /*
 284  * define serial signal status change macros
 285  */
 286 #define MISCSTATUS_DCD_LATCHED  (SerialSignal_DCD<<8)   /* indicates change in DCD */
 287 #define MISCSTATUS_RI_LATCHED   (SerialSignal_RI<<8)    /* indicates change in RI */
 288 #define MISCSTATUS_CTS_LATCHED  (SerialSignal_CTS<<8)   /* indicates change in CTS */
 289 #define MISCSTATUS_DSR_LATCHED  (SerialSignal_DSR<<8)   /* change in DSR */
 290
 291 /* Common Register macros */
 292 #define LPR     0x00
 293 #define PABR0   0x02
 294 #define PABR1   0x03
 295 #define WCRL    0x04
 296 #define WCRM    0x05
 297 #define WCRH    0x06
 298 #define DPCR    0x08
 299 #define DMER    0x09
 300 #define ISR0    0x10
 301 #define ISR1    0x11
 302 #define ISR2    0x12
 303 #define IER0    0x14
 304 #define IER1    0x15
 305 #define IER2    0x16
 306 #define ITCR    0x18
 307 #define INTVR   0x1a
 308 #define IMVR    0x1c
 309
 310 /* MSCI Register macros */
 311 #define TRB     0x20
 312 #define TRBL    0x20
 313 #define TRBH    0x21
 314 #define SR0     0x22
 315 #define SR1     0x23
 316 #define SR2     0x24
 317 #define SR3     0x25
 318 #define FST     0x26
 319 #define IE0     0x28
 320 #define IE1     0x29
 321 #define IE2     0x2a
 322 #define FIE     0x2b
 323 #define CMD     0x2c
 324 #define MD0     0x2e
 325 #define MD1     0x2f
 326 #define MD2     0x30
 327 #define CTL     0x31
 328 #define SA0     0x32
 329 #define SA1     0x33
 330 #define IDL     0x34
 331 #define TMC     0x35
 332 #define RXS     0x36
 333 #define TXS     0x37
 334 #define TRC0    0x38
 335 #define TRC1    0x39
 336 #define RRC     0x3a
 337 #define CST0    0x3c
 338 #define CST1    0x3d
 339
 340 /* Timer Register Macros */
 341 #define TCNT    0x60
 342 #define TCNTL   0x60
 343 #define TCNTH   0x61
 344 #define TCONR   0x62
 345 #define TCONRL  0x62
 346 #define TCONRH  0x63
 347 #define TMCS    0x64
 348 #define TEPR    0x65
 349
 350 /* DMA Controller Register macros */
 351 #define DARL    0x80
 352 #define DARH    0x81
 353 #define DARB    0x82
 354 #define BAR     0x80
 355 #define BARL    0x80
 356 #define BARH    0x81
 357 #define BARB    0x82
 358 #define SAR     0x84
 359 #define SARL    0x84
 360 #define SARH    0x85
 361 #define SARB    0x86
 362 #define CPB     0x86
 363 #define CDA     0x88
 364 #define CDAL    0x88
 365 #define CDAH    0x89
 366 #define EDA     0x8a
 367 #define EDAL    0x8a
 368 #define EDAH    0x8b
 369 #define BFL     0x8c
 370 #define BFLL    0x8c
 371 #define BFLH    0x8d
 372 #define BCR     0x8e
 373 #define BCRL    0x8e
 374 #define BCRH    0x8f
 375 #define DSR     0x90
 376 #define DMR     0x91
 377 #define FCT     0x93
 378 #define DIR     0x94
 379 #define DCMD    0x95
 380
 381 /* combine with timer or DMA register address */
 382 #define TIMER0  0x00
 383 #define TIMER1  0x08
 384 #define TIMER2  0x10
 385 #define TIMER3  0x18
 386 #define RXDMA   0x00
 387 #define TXDMA   0x20
 388
 389 /* SCA Command Codes */
 390 #define NOOP            0x00
 391 #define TXRESET         0x01
 392 #define TXENABLE        0x02
 393 #define TXDISABLE       0x03
 394 #define TXCRCINIT       0x04
 395 #define TXCRCEXCL       0x05
 396 #define TXEOM           0x06
 397 #define TXABORT         0x07
 398 #define MPON            0x08
 399 #define TXBUFCLR        0x09
 400 #define RXRESET         0x11
 401 #define RXENABLE        0x12
 402 #define RXDISABLE       0x13
 403 #define RXCRCINIT       0x14
 404 #define RXREJECT        0x15
 405 #define SEARCHMP        0x16
 406 #define RXCRCEXCL       0x17
 407 #define RXCRCCALC       0x18
 408 #define CHRESET         0x21
 409 #define HUNT            0x31
 410
 411 /* DMA command codes */
 412 #define SWABORT         0x01
 413 #define FEICLEAR        0x02
 414
 415 /* IE0 */
 416 #define TXINTE          BIT7
 417 #define RXINTE          BIT6
 418 #define TXRDYE          BIT1
 419 #define RXRDYE          BIT0
 420
 421 /* IE1 & SR1 */
 422 #define UDRN    BIT7
 423 #define IDLE    BIT6
 424 #define SYNCD   BIT4
 425 #define FLGD    BIT4
 426 #define CCTS    BIT3
 427 #define CDCD    BIT2
 428 #define BRKD    BIT1
 429 #define ABTD    BIT1
 430 #define GAPD    BIT1
 431 #define BRKE    BIT0
 432 #define IDLD    BIT0
 433
 434 /* IE2 & SR2 */
 435 #define EOM     BIT7
 436 #define PMP     BIT6
 437 #define SHRT    BIT6
 438 #define PE      BIT5
 439 #define ABT     BIT5
 440 #define FRME    BIT4
 441 #define RBIT    BIT4
 442 #define OVRN    BIT3
 443 #define CRCE    BIT2
 444
 445
 446 /*
 447  * Global linked list of SyncLink devices
 448  */
 449 static SLMP_INFO *synclinkmp_device_list = NULL;
 450 static int synclinkmp_adapter_count = -1;
 451 static int synclinkmp_device_count = 0;
 452
 453 /*
 454  * Set this param to non-zero to load eax with the
 455  * .text section address and breakpoint on module load.
 456  * This is useful for use with gdb and add-symbol-file command.
 457  */
 458 static int break_on_load = 0;
 459
 460 /*
 461  * Driver major number, defaults to zero to get auto
 462  * assigned major number. May be forced as module parameter.
 463  */
 464 static int ttymajor = 0;
 465
 466 /*
 467  * Array of user specified options for ISA adapters.
 468  */
 469 static int debug_level = 0;
 470 static int maxframe[MAX_DEVICES] = {0,};
 471
 472 module_param(break_on_load, bool, 0);
 473 module_param(ttymajor, int, 0);
 474 module_param(debug_level, int, 0);
 475 module_param_array(maxframe, int, NULL, 0);
 476
 477 static char *driver_name = "SyncLink MultiPort driver";
 478 static char *driver_version = "$Revision: 4.38 $";
 479
 480 static int synclinkmp_init_one(struct pci_dev *dev,const struct pci_device_id *ent);
 481 static void synclinkmp_remove_one(struct pci_dev *dev);
 482
 483 static struct pci_device_id synclinkmp_pci_tbl[] = {
 484         { PCI_VENDOR_ID_MICROGATE, PCI_DEVICE_ID_MICROGATE_SCA, PCI_ANY_ID, PCI_ANY_ID, },
 485         { 0, }, /* terminate list */
 486 };
 487 MODULE_DEVICE_TABLE(pci, synclinkmp_pci_tbl);
 488
 489 MODULE_LICENSE("GPL");
 490
 491 static struct pci_driver synclinkmp_pci_driver = {
 492         .name           = "synclinkmp",
 493         .id_table       = synclinkmp_pci_tbl,
 494         .probe          = synclinkmp_init_one,
 495         .remove         = __devexit_p(synclinkmp_remove_one),
 496 };
 497
 498
 499 static struct tty_driver *serial_driver;
 500
 501 /* number of characters left in xmit buffer before we ask for more */
 502 #define WAKEUP_CHARS 256
 503
 504
 505 /* tty callbacks */
 506
 507 static int  open(struct tty_struct *tty, struct file * filp);
 508 static void close(struct tty_struct *tty, struct file * filp);
 509 static void hangup(struct tty_struct *tty);
 510 static void set_termios(struct tty_struct *tty, struct ktermios *old_termios);
 511
 512 static int  write(struct tty_struct *tty, const unsigned char *buf, int count);
 513 static int put_char(struct tty_struct *tty, unsigned char ch);
 514 static void send_xchar(struct tty_struct *tty, char ch);
 515 static void wait_until_sent(struct tty_struct *tty, int timeout);
 516 static int  write_room(struct tty_struct *tty);
 517 static void flush_chars(struct tty_struct *tty);
 518 static void flush_buffer(struct tty_struct *tty);
 519 static void tx_hold(struct tty_struct *tty);
 520 static void tx_release(struct tty_struct *tty);
 521
 522 static int  ioctl(struct tty_struct *tty, struct file *file, unsigned int cmd, unsigned long arg);
 523 static int  read_proc(char *page, char **start, off_t off, int count,int *eof, void *data);
 524 static int  chars_in_buffer(struct tty_struct *tty);
 525 static void throttle(struct tty_struct * tty);
 526 static void unthrottle(struct tty_struct * tty);
 527 static int set_break(struct tty_struct *tty, int break_state);
 528
 529 #if SYNCLINK_GENERIC_HDLC
 530 #define dev_to_port(D) (dev_to_hdlc(D)->priv)
 531 static void hdlcdev_tx_done(SLMP_INFO *info);
 532 static void hdlcdev_rx(SLMP_INFO *info, char *buf, int size);
 533 static int  hdlcdev_init(SLMP_INFO *info);
 534 static void hdlcdev_exit(SLMP_INFO *info);
 535 #endif
 536
 537 /* ioctl handlers */
 538
 539 static int  get_stats(SLMP_INFO *info, struct mgsl_icount __user *user_icount);
 540 static int  get_params(SLMP_INFO *info, MGSL_PARAMS __user *params);
 541 static int  set_params(SLMP_INFO *info, MGSL_PARAMS __user *params);
 542 static int  get_txidle(SLMP_INFO *info, int __user *idle_mode);
 543 static int  set_txidle(SLMP_INFO *info, int idle_mode);
 544 static int  tx_enable(SLMP_INFO *info, int enable);
 545 static int  tx_abort(SLMP_INFO *info);
 546 static int  rx_enable(SLMP_INFO *info, int enable);
 547 static int  modem_input_wait(SLMP_INFO *info,int arg);
 548 static int  wait_mgsl_event(SLMP_INFO *info, int __user *mask_ptr);
 549 static int  tiocmget(struct tty_struct *tty, struct file *file);
 550 static int  tiocmset(struct tty_struct *tty, struct file *file,
 551                      unsigned int set, unsigned int clear);
 552 static int  set_break(struct tty_struct *tty, int break_state);
 553
 554 static void add_device(SLMP_INFO *info);
 555 static void device_init(int adapter_num, struct pci_dev *pdev);
 556 static int  claim_resources(SLMP_INFO *info);
 557 static void release_resources(SLMP_INFO *info);
 558
 559 static int  startup(SLMP_INFO *info);
 560 static int  block_til_ready(struct tty_struct *tty, struct file * filp,SLMP_INFO *info);
 561 static int carrier_raised(struct tty_port *port);
 562 static void shutdown(SLMP_INFO *info);
 563 static void program_hw(SLMP_INFO *info);
 564 static void change_params(SLMP_INFO *info);
 565
 566 static bool init_adapter(SLMP_INFO *info);
 567 static bool register_test(SLMP_INFO *info);
 568 static bool irq_test(SLMP_INFO *info);
 569 static bool loopback_test(SLMP_INFO *info);
 570 static int  adapter_test(SLMP_INFO *info);
 571 static bool memory_test(SLMP_INFO *info);
 572
 573 static void reset_adapter(SLMP_INFO *info);
 574 static void reset_port(SLMP_INFO *info);
 575 static void async_mode(SLMP_INFO *info);
 576 static void hdlc_mode(SLMP_INFO *info);
 577
 578 static void rx_stop(SLMP_INFO *info);
 579 static void rx_start(SLMP_INFO *info);
 580 static void rx_reset_buffers(SLMP_INFO *info);
 581 static void rx_free_frame_buffers(SLMP_INFO *info, unsigned int first, unsigned int last);
 582 static bool rx_get_frame(SLMP_INFO *info);
 583
 584 static void tx_start(SLMP_INFO *info);
 585 static void tx_stop(SLMP_INFO *info);
 586 static void tx_load_fifo(SLMP_INFO *info);
 587 static void tx_set_idle(SLMP_INFO *info);
 588 static void tx_load_dma_buffer(SLMP_INFO *info, const char *buf, unsigned int count);
 589
 590 static void get_signals(SLMP_INFO *info);
 591 static void set_signals(SLMP_INFO *info);
 592 static void enable_loopback(SLMP_INFO *info, int enable);
 593 static void set_rate(SLMP_INFO *info, u32 data_rate);
 594
 595 static int  bh_action(SLMP_INFO *info);
 596 static void bh_handler(struct work_struct *work);
 597 static void bh_receive(SLMP_INFO *info);
 598 static void bh_transmit(SLMP_INFO *info);
 599 static void bh_status(SLMP_INFO *info);
 600 static void isr_timer(SLMP_INFO *info);
 601 static void isr_rxint(SLMP_INFO *info);
 602 static void isr_rxrdy(SLMP_INFO *info);
 603 static void isr_txint(SLMP_INFO *info);
 604 static void isr_txrdy(SLMP_INFO *info);
 605 static void isr_rxdmaok(SLMP_INFO *info);
 606 static void isr_rxdmaerror(SLMP_INFO *info);
 607 static void isr_txdmaok(SLMP_INFO *info);
 608 static void isr_txdmaerror(SLMP_INFO *info);
 609 static void isr_io_pin(SLMP_INFO *info, u16 status);
 610
 611 static int  alloc_dma_bufs(SLMP_INFO *info);
 612 static void free_dma_bufs(SLMP_INFO *info);
 613 static int  alloc_buf_list(SLMP_INFO *info);
 614 static int  alloc_frame_bufs(SLMP_INFO *info, SCADESC *list, SCADESC_EX *list_ex,int count);
 615 static int  alloc_tmp_rx_buf(SLMP_INFO *info);
 616 static void free_tmp_rx_buf(SLMP_INFO *info);
 617
 618 static void load_pci_memory(SLMP_INFO *info, char* dest, const char* src, unsigned short count);
 619 static void trace_block(SLMP_INFO *info, const char* data, int count, int xmit);
 620 static void tx_timeout(unsigned long context);
 621 static void status_timeout(unsigned long context);
 622
 623 static unsigned char read_reg(SLMP_INFO *info, unsigned char addr);
 624 static void write_reg(SLMP_INFO *info, unsigned char addr, unsigned char val);
 625 static u16 read_reg16(SLMP_INFO *info, unsigned char addr);
 626 static void write_reg16(SLMP_INFO *info, unsigned char addr, u16 val);
 627 static unsigned char read_status_reg(SLMP_INFO * info);
 628 static void write_control_reg(SLMP_INFO * info);
 629
 630
 631 static unsigned char rx_active_fifo_level = 16; // rx request FIFO activation level in bytes
 632 static unsigned char tx_active_fifo_level = 16; // tx request FIFO activation level in bytes
 633 static unsigned char tx_negate_fifo_level = 32; // tx request FIFO negation level in bytes
 634
 635 static u32 misc_ctrl_value = 0x007e4040;
 636 static u32 lcr1_brdr_value = 0x00800028;
 637
 638 static u32 read_ahead_count = 8;
 639
 640 /* DPCR, DMA Priority Control
 641  *
 642  * 07..05  Not used, must be 0
 643  * 04      BRC, bus release condition: 0=all transfers complete
 644  *              1=release after 1 xfer on all channels
 645  * 03      CCC, channel change condition: 0=every cycle
 646  *              1=after each channel completes all xfers
 647  * 02..00  PR<2..0>, priority 100=round robin
 648  *
 649  * 00000100 = 0x00
 650  */
 651 static unsigned char dma_priority = 0x04;
 652
 653 // Number of bytes that can be written to shared RAM
 654 // in a single write operation
 655 static u32 sca_pci_load_interval = 64;
 656
 657 /*
 658  * 1st function defined in .text section. Calling this function in
 659  * init_module() followed by a breakpoint allows a remote debugger
 660  * (gdb) to get the .text address for the add-symbol-file command.
 661  * This allows remote debugging of dynamically loadable modules.
 662  */
 663 static void* synclinkmp_get_text_ptr(void);
 664 static void* synclinkmp_get_text_ptr(void) {return synclinkmp_get_text_ptr;}
 665
 666 static inline int sanity_check(SLMP_INFO *info,
 667                                char *name, const char *routine)
 668 {
 669 #ifdef SANITY_CHECK
 670         static const char *badmagic =
 671                 "Warning: bad magic number for synclinkmp_struct (%s) in %s\n";
 672         static const char *badinfo =
 673                 "Warning: null synclinkmp_struct for (%s) in %s\n";
 674
 675         if (!info) {
 676                 printk(badinfo, name, routine);
 677                 return 1;
 678         }
 679         if (info->magic != MGSL_MAGIC) {
 680                 printk(badmagic, name, routine);
 681                 return 1;
 682         }
 683 #else
 684         if (!info)
 685                 return 1;
 686 #endif
 687         return 0;
 688 }
 689
 690 /**
 691  * line discipline callback wrappers
 692  *
 693  * The wrappers maintain line discipline references
 694  * while calling into the line discipline.
 695  *
 696  * ldisc_receive_buf  - pass receive data to line discipline
 697  */
 698
 699 static void ldisc_receive_buf(struct tty_struct *tty,
 700                               const __u8 *data, char *flags, int count)
 701 {
 702         struct tty_ldisc *ld;
 703         if (!tty)
 704                 return;
 705         ld = tty_ldisc_ref(tty);
 706         if (ld) {
 707                 if (ld->ops->receive_buf)
 708                         ld->ops->receive_buf(tty, data, flags, count);
 709                 tty_ldisc_deref(ld);
 710         }
 711 }
 712
 713 /* tty callbacks */
 714
 715 /* Called when a port is opened.  Init and enable port.
 716  */
 717 static int open(struct tty_struct *tty, struct file *filp)
 718 {
 719         SLMP_INFO *info;
 720         int retval, line;
 721         unsigned long flags;
 722
 723         line = tty->index;
 724         if ((line < 0) || (line >= synclinkmp_device_count)) {
 725                 printk("%s(%d): open with invalid line #%d.\n",
 726                         __FILE__,__LINE__,line);
 727                 return -ENODEV;
 728         }
 729
 730         info = synclinkmp_device_list;
 731         while(info && info->line != line)
 732                 info = info->next_device;
 733         if (sanity_check(info, tty->name, "open"))
 734                 return -ENODEV;
 735         if ( info->init_error ) {
 736                 printk("%s(%d):%s device is not allocated, init error=%d\n",
 737                         __FILE__,__LINE__,info->device_name,info->init_error);
 738                 return -ENODEV;
 739         }
 740
 741         tty->driver_data = info;
 742         info->port.tty = tty;
 743
 744         if (debug_level >= DEBUG_LEVEL_INFO)
 745                 printk("%s(%d):%s open(), old ref count = %d\n",
 746                          __FILE__,__LINE__,tty->driver->name, info->port.count);
 747
 748         /* If port is closing, signal caller to try again */
 749         if (tty_hung_up_p(filp) || info->port.flags & ASYNC_CLOSING){
 750                 if (info->port.flags & ASYNC_CLOSING)
 751                         interruptible_sleep_on(&info->port.close_wait);
 752                 retval = ((info->port.flags & ASYNC_HUP_NOTIFY) ?
 753                         -EAGAIN : -ERESTARTSYS);
 754                 goto cleanup;
 755         }
 756
 757         info->port.tty->low_latency = (info->port.flags & ASYNC_LOW_LATENCY) ? 1 : 0;
 758
 759         spin_lock_irqsave(&info->netlock, flags);
 760         if (info->netcount) {
 761                 retval = -EBUSY;
 762                 spin_unlock_irqrestore(&info->netlock, flags);
 763                 goto cleanup;
 764         }
 765         info->port.count++;
 766         spin_unlock_irqrestore(&info->netlock, flags);
 767
 768         if (info->port.count == 1) {
 769                 /* 1st open on this device, init hardware */
 770                 retval = startup(info);
 771                 if (retval < 0)
 772                         goto cleanup;
 773         }
 774
 775         retval = block_til_ready(tty, filp, info);
 776         if (retval) {
 777                 if (debug_level >= DEBUG_LEVEL_INFO)
 778                         printk("%s(%d):%s block_til_ready() returned %d\n",
 779                                  __FILE__,__LINE__, info->device_name, retval);
 780                 goto cleanup;
 781         }
 782
 783         if (debug_level >= DEBUG_LEVEL_INFO)
 784                 printk("%s(%d):%s open() success\n",
 785                          __FILE__,__LINE__, info->device_name);
 786         retval = 0;
 787
 788 cleanup:
 789         if (retval) {
 790                 if (tty->count == 1)
 791                         info->port.tty = NULL; /* tty layer will release tty struct */
 792                 if(info->port.count)
 793                         info->port.count--;
 794         }
 795
 796         return retval;
 797 }
 798
 799 /* Called when port is closed. Wait for remaining data to be
 800  * sent. Disable port and free resources.
 801  */
 802 static void close(struct tty_struct *tty, struct file *filp)
 803 {
 804         SLMP_INFO * info = tty->driver_data;
 805
 806         if (sanity_check(info, tty->name, "close"))
 807                 return;
 808
 809         if (debug_level >= DEBUG_LEVEL_INFO)
 810                 printk("%s(%d):%s close() entry, count=%d\n",
 811                          __FILE__,__LINE__, info->device_name, info->port.count);
 812
 813         if (tty_port_close_start(&info->port, tty, filp) == 0)
 814                 goto cleanup;
 815
 816         if (info->port.flags & ASYNC_INITIALIZED)
 817                 wait_until_sent(tty, info->timeout);
 818
 819         flush_buffer(tty);
 820         tty_ldisc_flush(tty);
 821         shutdown(info);
 822
 823         tty_port_close_end(&info->port, tty);
 824         info->port.tty = NULL;
 825 cleanup:
 826         if (debug_level >= DEBUG_LEVEL_INFO)
 827                 printk("%s(%d):%s close() exit, count=%d\n", __FILE__,__LINE__,
 828                         tty->driver->name, info->port.count);
 829 }
 830
 831 /* Called by tty_hangup() when a hangup is signaled.
 832  * This is the same as closing all open descriptors for the port.
 833  */
 834 static void hangup(struct tty_struct *tty)
 835 {
 836         SLMP_INFO *info = tty->driver_data;
 837
 838         if (debug_level >= DEBUG_LEVEL_INFO)
 839                 printk("%s(%d):%s hangup()\n",
 840                          __FILE__,__LINE__, info->device_name );
 841
 842         if (sanity_check(info, tty->name, "hangup"))
 843                 return;
 844
 845         flush_buffer(tty);
 846         shutdown(info);
 847
 848         info->port.count = 0;
 849         info->port.flags &= ~ASYNC_NORMAL_ACTIVE;
 850         info->port.tty = NULL;
 851
 852         wake_up_interruptible(&info->port.open_wait);
 853 }
 854
 855 /* Set new termios settings
 856  */
 857 static void set_termios(struct tty_struct *tty, struct ktermios *old_termios)
 858 {
 859         SLMP_INFO *info = tty->driver_data;
 860         unsigned long flags;
 861
 862         if (debug_level >= DEBUG_LEVEL_INFO)
 863                 printk("%s(%d):%s set_termios()\n", __FILE__,__LINE__,
 864                         tty->driver->name );
 865
 866         change_params(info);
 867
 868         /* Handle transition to B0 status */
 869         if (old_termios->c_cflag & CBAUD &&
 870             !(tty->termios->c_cflag & CBAUD)) {
 871                 info->serial_signals &= ~(SerialSignal_RTS + SerialSignal_DTR);
 872                 spin_lock_irqsave(&info->lock,flags);
 873                 set_signals(info);
 874                 spin_unlock_irqrestore(&info->lock,flags);
 875         }
 876
 877         /* Handle transition away from B0 status */
 878         if (!(old_termios->c_cflag & CBAUD) &&
 879             tty->termios->c_cflag & CBAUD) {
 880                 info->serial_signals |= SerialSignal_DTR;
 881                 if (!(tty->termios->c_cflag & CRTSCTS) ||
 882                     !test_bit(TTY_THROTTLED, &tty->flags)) {
 883                         info->serial_signals |= SerialSignal_RTS;
 884                 }
 885                 spin_lock_irqsave(&info->lock,flags);
 886                 set_signals(info);
 887                 spin_unlock_irqrestore(&info->lock,flags);
 888         }
 889
 890         /* Handle turning off CRTSCTS */
 891         if (old_termios->c_cflag & CRTSCTS &&
 892             !(tty->termios->c_cflag & CRTSCTS)) {
 893                 tty->hw_stopped = 0;
 894                 tx_release(tty);
 895         }
 896 }
 897
 898 /* Send a block of data
 899  *
 900  * Arguments:
 901  *
 902  *      tty             pointer to tty information structure
 903  *      buf             pointer to buffer containing send data
 904  *      count           size of send data in bytes
 905  *
 906  * Return Value:        number of characters written
 907  */
 908 static int write(struct tty_struct *tty,
 909                  const unsigned char *buf, int count)
 910 {
 911         int     c, ret = 0;
 912         SLMP_INFO *info = tty->driver_data;
 913         unsigned long flags;
 914
 915         if (debug_level >= DEBUG_LEVEL_INFO)
 916                 printk("%s(%d):%s write() count=%d\n",
 917                        __FILE__,__LINE__,info->device_name,count);
 918
 919         if (sanity_check(info, tty->name, "write"))
 920                 goto cleanup;
 921
 922         if (!info->tx_buf)
 923                 goto cleanup;
 924
 925         if (info->params.mode == MGSL_MODE_HDLC) {
 926                 if (count > info->max_frame_size) {
 927                         ret = -EIO;
 928                         goto cleanup;
 929                 }
 930                 if (info->tx_active)
 931                         goto cleanup;
 932                 if (info->tx_count) {
 933                         /* send accumulated data from send_char() calls */
 934                         /* as frame and wait before accepting more data. */
 935                         tx_load_dma_buffer(info, info->tx_buf, info->tx_count);
 936                         goto start;
 937                 }
 938                 ret = info->tx_count = count;
 939                 tx_load_dma_buffer(info, buf, count);
 940                 goto start;
 941         }
 942
 943         for (;;) {
 944                 c = min_t(int, count,
 945                         min(info->max_frame_size - info->tx_count - 1,
 946                             info->max_frame_size - info->tx_put));
 947                 if (c <= 0)
 948                         break;
 949
 950                 memcpy(info->tx_buf + info->tx_put, buf, c);
 951
 952                 spin_lock_irqsave(&info->lock,flags);
 953                 info->tx_put += c;
 954                 if (info->tx_put >= info->max_frame_size)
 955                         info->tx_put -= info->max_frame_size;
 956                 info->tx_count += c;
 957                 spin_unlock_irqrestore(&info->lock,flags);
 958
 959                 buf += c;
 960                 count -= c;
 961                 ret += c;
 962         }
 963
 964         if (info->params.mode == MGSL_MODE_HDLC) {
 965                 if (count) {
 966                         ret = info->tx_count = 0;
 967                         goto cleanup;
 968                 }
 969                 tx_load_dma_buffer(info, info->tx_buf, info->tx_count);
 970         }
 971 start:
 972         if (info->tx_count && !tty->stopped && !tty->hw_stopped) {
 973                 spin_lock_irqsave(&info->lock,flags);
 974                 if (!info->tx_active)
 975                         tx_start(info);
 976                 spin_unlock_irqrestore(&info->lock,flags);
 977         }
 978
 979 cleanup:
 980         if (debug_level >= DEBUG_LEVEL_INFO)
 981                 printk( "%s(%d):%s write() returning=%d\n",
 982                         __FILE__,__LINE__,info->device_name,ret);
 983         return ret;
 984 }
 985
 986 /* Add a character to the transmit buffer.
 987  */
 988 static int put_char(struct tty_struct *tty, unsigned char ch)
 989 {
 990         SLMP_INFO *info = tty->driver_data;
 991         unsigned long flags;
 992         int ret = 0;
 993
 994         if ( debug_level >= DEBUG_LEVEL_INFO ) {
 995                 printk( "%s(%d):%s put_char(%d)\n",
 996                         __FILE__,__LINE__,info->device_name,ch);
 997         }
 998
 999         if (sanity_check(info, tty->name, "put_char"))
1000                 return 0;
1001
1002         if (!info->tx_buf)
1003                 return 0;
1004
1005         spin_lock_irqsave(&info->lock,flags);
1006
1007         if ( (info->params.mode != MGSL_MODE_HDLC) ||
1008              !info->tx_active ) {
1009
1010                 if (info->tx_count < info->max_frame_size - 1) {
1011                         info->tx_buf[info->tx_put++] = ch;
1012                         if (info->tx_put >= info->max_frame_size)
1013                                 info->tx_put -= info->max_frame_size;
1014                         info->tx_count++;
1015                         ret = 1;
1016                 }
1017         }
1018
1019         spin_unlock_irqrestore(&info->lock,flags);
1020         return ret;
1021 }
1022
1023 /* Send a high-priority XON/XOFF character
1024  */
1025 static void send_xchar(struct tty_struct *tty, char ch)
1026 {
1027         SLMP_INFO *info = tty->driver_data;
1028         unsigned long flags;
1029
1030         if (debug_level >= DEBUG_LEVEL_INFO)
1031                 printk("%s(%d):%s send_xchar(%d)\n",
1032                          __FILE__,__LINE__, info->device_name, ch );
1033
1034         if (sanity_check(info, tty->name, "send_xchar"))
1035                 return;
1036
1037         info->x_char = ch;
1038         if (ch) {
1039                 /* Make sure transmit interrupts are on */
1040                 spin_lock_irqsave(&info->lock,flags);
1041                 if (!info->tx_enabled)
1042                         tx_start(info);
1043                 spin_unlock_irqrestore(&info->lock,flags);
1044         }
1045 }
1046
1047 /* Wait until the transmitter is empty.
1048  */
1049 static void wait_until_sent(struct tty_struct *tty, int timeout)
1050 {
1051         SLMP_INFO * info = tty->driver_data;
1052         unsigned long orig_jiffies, char_time;
1053
1054         if (!info )
1055                 return;
1056
1057         if (debug_level >= DEBUG_LEVEL_INFO)
1058                 printk("%s(%d):%s wait_until_sent() entry\n",
1059                          __FILE__,__LINE__, info->device_name );
1060
1061         if (sanity_check(info, tty->name, "wait_until_sent"))
1062                 return;
1063
1064         lock_kernel();
1065
1066         if (!(info->port.flags & ASYNC_INITIALIZED))
1067                 goto exit;
1068
1069         orig_jiffies = jiffies;
1070
1071         /* Set check interval to 1/5 of estimated time to
1072          * send a character, and make it at least 1. The check
1073          * interval should also be less than the timeout.
1074          * Note: use tight timings here to satisfy the NIST-PCTS.
1075          */
1076
1077         if ( info->params.data_rate ) {
1078                 char_time = info->timeout/(32 * 5);
1079                 if (!char_time)
1080                         char_time++;
1081         } else
1082                 char_time = 1;
1083
1084         if (timeout)
1085                 char_time = min_t(unsigned long, char_time, timeout);
1086
1087         if ( info->params.mode == MGSL_MODE_HDLC ) {
1088                 while (info->tx_active) {
1089                         msleep_interruptible(jiffies_to_msecs(char_time));
1090                         if (signal_pending(current))
1091                                 break;
1092                         if (timeout && time_after(jiffies, orig_jiffies + timeout))
1093                                 break;
1094                 }
1095         } else {
1096                 //TODO: determine if there is something similar to USC16C32
1097                 //      TXSTATUS_ALL_SENT status
1098                 while ( info->tx_active && info->tx_enabled) {
1099                         msleep_interruptible(jiffies_to_msecs(char_time));
1100                         if (signal_pending(current))
1101                                 break;
1102                         if (timeout && time_after(jiffies, orig_jiffies + timeout))
1103                                 break;
1104                 }
1105         }
1106
1107 exit:
1108         unlock_kernel();
1109         if (debug_level >= DEBUG_LEVEL_INFO)
1110                 printk("%s(%d):%s wait_until_sent() exit\n",
1111                          __FILE__,__LINE__, info->device_name );
1112 }
1113
1114 /* Return the count of free bytes in transmit buffer
1115  */
1116 static int write_room(struct tty_struct *tty)
1117 {
1118         SLMP_INFO *info = tty->driver_data;
1119         int ret;
1120
1121         if (sanity_check(info, tty->name, "write_room"))
1122                 return 0;
1123
1124         lock_kernel();
1125         if (info->params.mode == MGSL_MODE_HDLC) {
1126                 ret = (info->tx_active) ? 0 : HDLC_MAX_FRAME_SIZE;
1127         } else {
1128                 ret = info->max_frame_size - info->tx_count - 1;
1129                 if (ret < 0)
1130                         ret = 0;
1131         }
1132         unlock_kernel();
1133
1134         if (debug_level >= DEBUG_LEVEL_INFO)
1135                 printk("%s(%d):%s write_room()=%d\n",
1136                        __FILE__, __LINE__, info->device_name, ret);
1137
1138         return ret;
1139 }
1140
1141 /* enable transmitter and send remaining buffered characters
1142  */
1143 static void flush_chars(struct tty_struct *tty)
1144 {
1145         SLMP_INFO *info = tty->driver_data;
1146         unsigned long flags;
1147
1148         if ( debug_level >= DEBUG_LEVEL_INFO )
1149                 printk( "%s(%d):%s flush_chars() entry tx_count=%d\n",
1150                         __FILE__,__LINE__,info->device_name,info->tx_count);
1151
1152         if (sanity_check(info, tty->name, "flush_chars"))
1153                 return;
1154
1155         if (info->tx_count <= 0 || tty->stopped || tty->hw_stopped ||
1156             !info->tx_buf)
1157                 return;
1158
1159         if ( debug_level >= DEBUG_LEVEL_INFO )
1160                 printk( "%s(%d):%s flush_chars() entry, starting transmitter\n",
1161                         __FILE__,__LINE__,info->device_name );
1162
1163         spin_lock_irqsave(&info->lock,flags);
1164
1165         if (!info->tx_active) {
1166                 if ( (info->params.mode == MGSL_MODE_HDLC) &&
1167                         info->tx_count ) {
1168                         /* operating in synchronous (frame oriented) mode */
1169                         /* copy data from circular tx_buf to */
1170                         /* transmit DMA buffer. */
1171                         tx_load_dma_buffer(info,
1172                                  info->tx_buf,info->tx_count);
1173                 }
1174                 tx_start(info);
1175         }
1176
1177         spin_unlock_irqrestore(&info->lock,flags);
1178 }
1179
1180 /* Discard all data in the send buffer
1181  */
1182 static void flush_buffer(struct tty_struct *tty)
1183 {
1184         SLMP_INFO *info = tty->driver_data;
1185         unsigned long flags;
1186
1187         if (debug_level >= DEBUG_LEVEL_INFO)
1188                 printk("%s(%d):%s flush_buffer() entry\n",
1189                          __FILE__,__LINE__, info->device_name );
1190
1191         if (sanity_check(info, tty->name, "flush_buffer"))
1192                 return;
1193
1194         spin_lock_irqsave(&info->lock,flags);
1195         info->tx_count = info->tx_put = info->tx_get = 0;
1196         del_timer(&info->tx_timer);
1197         spin_unlock_irqrestore(&info->lock,flags);
1198
1199         tty_wakeup(tty);
1200 }
1201
1202 /* throttle (stop) transmitter
1203  */
1204 static void tx_hold(struct tty_struct *tty)
1205 {
1206         SLMP_INFO *info = tty->driver_data;
1207         unsigned long flags;
1208
1209         if (sanity_check(info, tty->name, "tx_hold"))
1210                 return;
1211
1212         if ( debug_level >= DEBUG_LEVEL_INFO )
1213                 printk("%s(%d):%s tx_hold()\n",
1214                         __FILE__,__LINE__,info->device_name);
1215
1216         spin_lock_irqsave(&info->lock,flags);
1217         if (info->tx_enabled)
1218                 tx_stop(info);
1219         spin_unlock_irqrestore(&info->lock,flags);
1220 }
1221
1222 /* release (start) transmitter
1223  */
1224 static void tx_release(struct tty_struct *tty)
1225 {
1226         SLMP_INFO *info = tty->driver_data;
1227         unsigned long flags;
1228
1229         if (sanity_check(info, tty->name, "tx_release"))
1230                 return;
1231
1232         if ( debug_level >= DEBUG_LEVEL_INFO )
1233                 printk("%s(%d):%s tx_release()\n",
1234                         __FILE__,__LINE__,info->device_name);
1235
1236         spin_lock_irqsave(&info->lock,flags);
1237         if (!info->tx_enabled)
1238                 tx_start(info);
1239         spin_unlock_irqrestore(&info->lock,flags);
1240 }
1241
1242 /* Service an IOCTL request
1243  *
1244  * Arguments:
1245  *
1246  *      tty     pointer to tty instance data
1247  *      file    pointer to associated file object for device
1248  *      cmd     IOCTL command code
1249  *      arg     command argument/context
1250  *
1251  * Return Value:        0 if success, otherwise error code
1252  */
1253 static int do_ioctl(struct tty_struct *tty, struct file *file,
1254                  unsigned int cmd, unsigned long arg)
1255 {
1256         SLMP_INFO *info = tty->driver_data;
1257         int error;
1258         struct mgsl_icount cnow;        /* kernel counter temps */
1259         struct serial_icounter_struct __user *p_cuser;  /* user space */
1260         unsigned long flags;
1261         void __user *argp = (void __user *)arg;
1262
1263         if (debug_level >= DEBUG_LEVEL_INFO)
1264                 printk("%s(%d):%s ioctl() cmd=%08X\n", __FILE__,__LINE__,
1265                         info->device_name, cmd );
1266
1267         if (sanity_check(info, tty->name, "ioctl"))
1268                 return -ENODEV;
1269
1270         if ((cmd != TIOCGSERIAL) && (cmd != TIOCSSERIAL) &&
1271             (cmd != TIOCMIWAIT) && (cmd != TIOCGICOUNT)) {
1272                 if (tty->flags & (1 << TTY_IO_ERROR))
1273                     return -EIO;
1274         }
1275
1276         switch (cmd) {
1277         case MGSL_IOCGPARAMS:
1278                 return get_params(info, argp);
1279         case MGSL_IOCSPARAMS:
1280                 return set_params(info, argp);
1281         case MGSL_IOCGTXIDLE:
1282                 return get_txidle(info, argp);
1283         case MGSL_IOCSTXIDLE:
1284                 return set_txidle(info, (int)arg);
1285         case MGSL_IOCTXENABLE:
1286                 return tx_enable(info, (int)arg);
1287         case MGSL_IOCRXENABLE:
1288                 return rx_enable(info, (int)arg);
1289         case MGSL_IOCTXABORT:
1290                 return tx_abort(info);
1291         case MGSL_IOCGSTATS:
1292                 return get_stats(info, argp);
1293         case MGSL_IOCWAITEVENT:
1294                 return wait_mgsl_event(info, argp);
1295         case MGSL_IOCLOOPTXDONE:
1296                 return 0; // TODO: Not supported, need to document
1297                 /* Wait for modem input (DCD,RI,DSR,CTS) change
1298                  * as specified by mask in arg (TIOCM_RNG/DSR/CD/CTS)
1299                  */
1300         case TIOCMIWAIT:
1301                 return modem_input_wait(info,(int)arg);
1302
1303                 /*
1304                  * Get counter of input serial line interrupts (DCD,RI,DSR,CTS)
1305                  * Return: write counters to the user passed counter struct
1306                  * NB: both 1->0 and 0->1 transitions are counted except for
1307                  *     RI where only 0->1 is counted.
1308                  */
1309         case TIOCGICOUNT:
1310                 spin_lock_irqsave(&info->lock,flags);
1311                 cnow = info->icount;
1312                 spin_unlock_irqrestore(&info->lock,flags);
1313                 p_cuser = argp;
1314                 PUT_USER(error,cnow.cts, &p_cuser->cts);
1315                 if (error) return error;
1316                 PUT_USER(error,cnow.dsr, &p_cuser->dsr);
1317                 if (error) return error;
1318                 PUT_USER(error,cnow.rng, &p_cuser->rng);
1319                 if (error) return error;
1320                 PUT_USER(error,cnow.dcd, &p_cuser->dcd);
1321                 if (error) return error;
1322                 PUT_USER(error,cnow.rx, &p_cuser->rx);
1323                 if (error) return error;
1324                 PUT_USER(error,cnow.tx, &p_cuser->tx);
1325                 if (error) return error;
1326                 PUT_USER(error,cnow.frame, &p_cuser->frame);
1327                 if (error) return error;
1328                 PUT_USER(error,cnow.overrun, &p_cuser->overrun);
1329                 if (error) return error;
1330                 PUT_USER(error,cnow.parity, &p_cuser->parity);
1331                 if (error) return error;
1332                 PUT_USER(error,cnow.brk, &p_cuser->brk);
1333                 if (error) return error;
1334                 PUT_USER(error,cnow.buf_overrun, &p_cuser->buf_overrun);
1335                 if (error) return error;
1336                 return 0;
1337         default:
1338                 return -ENOIOCTLCMD;
1339         }
1340         return 0;
1341 }
1342
1343 static int ioctl(struct tty_struct *tty, struct file *file,
1344                  unsigned int cmd, unsigned long arg)
1345 {
1346         int ret;
1347         lock_kernel();
1348         ret = do_ioctl(tty, file, cmd, arg);
1349         unlock_kernel();
1350         return ret;
1351 }
1352
1353 /*
1354  * /proc fs routines....
1355  */
1356
1357 static inline int line_info(char *buf, SLMP_INFO *info)
1358 {
1359         char    stat_buf[30];
1360         int     ret;
1361         unsigned long flags;
1362
1363         ret = sprintf(buf, "%s: SCABase=%08x Mem=%08X StatusControl=%08x LCR=%08X\n"
1364                        "\tIRQ=%d MaxFrameSize=%u\n",
1365                 info->device_name,
1366                 info->phys_sca_base,
1367                 info->phys_memory_base,
1368                 info->phys_statctrl_base,
1369                 info->phys_lcr_base,
1370                 info->irq_level,
1371                 info->max_frame_size );
1372
1373         /* output current serial signal states */
1374         spin_lock_irqsave(&info->lock,flags);
1375         get_signals(info);
1376         spin_unlock_irqrestore(&info->lock,flags);
1377
1378         stat_buf[0] = 0;
1379         stat_buf[1] = 0;
1380         if (info->serial_signals & SerialSignal_RTS)
1381                 strcat(stat_buf, "|RTS");
1382         if (info->serial_signals & SerialSignal_CTS)
1383                 strcat(stat_buf, "|CTS");
1384         if (info->serial_signals & SerialSignal_DTR)
1385                 strcat(stat_buf, "|DTR");
1386         if (info->serial_signals & SerialSignal_DSR)
1387                 strcat(stat_buf, "|DSR");
1388         if (info->serial_signals & SerialSignal_DCD)
1389                 strcat(stat_buf, "|CD");
1390         if (info->serial_signals & SerialSignal_RI)
1391                 strcat(stat_buf, "|RI");
1392
1393         if (info->params.mode == MGSL_MODE_HDLC) {
1394                 ret += sprintf(buf+ret, "\tHDLC txok:%d rxok:%d",
1395                               info->icount.txok, info->icount.rxok);
1396                 if (info->icount.txunder)
1397                         ret += sprintf(buf+ret, " txunder:%d", info->icount.txunder);
1398                 if (info->icount.txabort)
1399                         ret += sprintf(buf+ret, " txabort:%d", info->icount.txabort);
1400                 if (info->icount.rxshort)
1401                         ret += sprintf(buf+ret, " rxshort:%d", info->icount.rxshort);
1402                 if (info->icount.rxlong)
1403                         ret += sprintf(buf+ret, " rxlong:%d", info->icount.rxlong);
1404                 if (info->icount.rxover)
1405                         ret += sprintf(buf+ret, " rxover:%d", info->icount.rxover);
1406                 if (info->icount.rxcrc)
1407                         ret += sprintf(buf+ret, " rxlong:%d", info->icount.rxcrc);
1408         } else {
1409                 ret += sprintf(buf+ret, "\tASYNC tx:%d rx:%d",
1410                               info->icount.tx, info->icount.rx);
1411                 if (info->icount.frame)
1412                         ret += sprintf(buf+ret, " fe:%d", info->icount.frame);
1413                 if (info->icount.parity)
1414                         ret += sprintf(buf+ret, " pe:%d", info->icount.parity);
1415                 if (info->icount.brk)
1416                         ret += sprintf(buf+ret, " brk:%d", info->icount.brk);
1417                 if (info->icount.overrun)
1418                         ret += sprintf(buf+ret, " oe:%d", info->icount.overrun);
1419         }
1420
1421         /* Append serial signal status to end */
1422         ret += sprintf(buf+ret, " %s\n", stat_buf+1);
1423
1424         ret += sprintf(buf+ret, "\ttxactive=%d bh_req=%d bh_run=%d pending_bh=%x\n",
1425          info->tx_active,info->bh_requested,info->bh_running,
1426          info->pending_bh);
1427
1428         return ret;
1429 }
1430
1431 /* Called to print information about devices
1432  */
1433 static int read_proc(char *page, char **start, off_t off, int count,
1434               int *eof, void *data)
1435 {
1436         int len = 0, l;
1437         off_t   begin = 0;
1438         SLMP_INFO *info;
1439
1440         len += sprintf(page, "synclinkmp driver:%s\n", driver_version);
1441
1442         info = synclinkmp_device_list;
1443         while( info ) {
1444                 l = line_info(page + len, info);
1445                 len += l;
1446                 if (len+begin > off+count)
1447                         goto done;
1448                 if (len+begin < off) {
1449                         begin += len;
1450                         len = 0;
1451                 }
1452                 info = info->next_device;
1453         }
1454
1455         *eof = 1;
1456 done:
1457         if (off >= len+begin)
1458                 return 0;
1459         *start = page + (off-begin);
1460         return ((count < begin+len-off) ? count : begin+len-off);
1461 }
1462
1463 /* Return the count of bytes in transmit buffer
1464  */
1465 static int chars_in_buffer(struct tty_struct *tty)
1466 {
1467         SLMP_INFO *info = tty->driver_data;
1468
1469         if (sanity_check(info, tty->name, "chars_in_buffer"))
1470                 return 0;
1471
1472         if (debug_level >= DEBUG_LEVEL_INFO)
1473                 printk("%s(%d):%s chars_in_buffer()=%d\n",
1474                        __FILE__, __LINE__, info->device_name, info->tx_count);
1475
1476         return info->tx_count;
1477 }
1478
1479 /* Signal remote device to throttle send data (our receive data)
1480  */
1481 static void throttle(struct tty_struct * tty)
1482 {
1483         SLMP_INFO *info = tty->driver_data;
1484         unsigned long flags;
1485
1486         if (debug_level >= DEBUG_LEVEL_INFO)
1487                 printk("%s(%d):%s throttle() entry\n",
1488                          __FILE__,__LINE__, info->device_name );
1489
1490         if (sanity_check(info, tty->name, "throttle"))
1491                 return;
1492
1493         if (I_IXOFF(tty))
1494                 send_xchar(tty, STOP_CHAR(tty));
1495
1496         if (tty->termios->c_cflag & CRTSCTS) {
1497                 spin_lock_irqsave(&info->lock,flags);
1498                 info->serial_signals &= ~SerialSignal_RTS;
1499                 set_signals(info);
1500                 spin_unlock_irqrestore(&info->lock,flags);
1501         }
1502 }
1503
1504 /* Signal remote device to stop throttling send data (our receive data)
1505  */
1506 static void unthrottle(struct tty_struct * tty)
1507 {
1508         SLMP_INFO *info = tty->driver_data;
1509         unsigned long flags;
1510
1511         if (debug_level >= DEBUG_LEVEL_INFO)
1512                 printk("%s(%d):%s unthrottle() entry\n",
1513                          __FILE__,__LINE__, info->device_name );
1514
1515         if (sanity_check(info, tty->name, "unthrottle"))
1516                 return;
1517
1518         if (I_IXOFF(tty)) {
1519                 if (info->x_char)
1520                         info->x_char = 0;
1521                 else
1522                         send_xchar(tty, START_CHAR(tty));
1523         }
1524
1525         if (tty->termios->c_cflag & CRTSCTS) {
1526                 spin_lock_irqsave(&info->lock,flags);
1527                 info->serial_signals |= SerialSignal_RTS;
1528                 set_signals(info);
1529                 spin_unlock_irqrestore(&info->lock,flags);
1530         }
1531 }
1532
1533 /* set or clear transmit break condition
1534  * break_state  -1=set break condition, 0=clear
1535  */
1536 static int set_break(struct tty_struct *tty, int break_state)
1537 {
1538         unsigned char RegValue;
1539         SLMP_INFO * info = tty->driver_data;
1540         unsigned long flags;
1541
1542         if (debug_level >= DEBUG_LEVEL_INFO)
1543                 printk("%s(%d):%s set_break(%d)\n",
1544                          __FILE__,__LINE__, info->device_name, break_state);
1545
1546         if (sanity_check(info, tty->name, "set_break"))
1547                 return -EINVAL;
1548
1549         spin_lock_irqsave(&info->lock,flags);
1550         RegValue = read_reg(info, CTL);
1551         if (break_state == -1)
1552                 RegValue |= BIT3;
1553         else
1554                 RegValue &= ~BIT3;
1555         write_reg(info, CTL, RegValue);
1556         spin_unlock_irqrestore(&info->lock,flags);
1557         return 0;
1558 }
1559
1560 #if SYNCLINK_GENERIC_HDLC
1561
1562 /**
1563  * called by generic HDLC layer when protocol selected (PPP, frame relay, etc.)
1564  * set encoding and frame check sequence (FCS) options
1565  *
1566  * dev       pointer to network device structure
1567  * encoding  serial encoding setting
1568  * parity    FCS setting
1569  *
1570  * returns 0 if success, otherwise error code
1571  */
1572 static int hdlcdev_attach(struct net_device *dev, unsigned short encoding,
1573                           unsigned short parity)
1574 {
1575         SLMP_INFO *info = dev_to_port(dev);
1576         unsigned char  new_encoding;
1577         unsigned short new_crctype;
1578
1579         /* return error if TTY interface open */
1580         if (info->port.count)
1581                 return -EBUSY;
1582
1583         switch (encoding)
1584         {
1585         case ENCODING_NRZ:        new_encoding = HDLC_ENCODING_NRZ; break;
1586         case ENCODING_NRZI:       new_encoding = HDLC_ENCODING_NRZI_SPACE; break;
1587         case ENCODING_FM_MARK:    new_encoding = HDLC_ENCODING_BIPHASE_MARK; break;
1588         case ENCODING_FM_SPACE:   new_encoding = HDLC_ENCODING_BIPHASE_SPACE; break;
1589         case ENCODING_MANCHESTER: new_encoding = HDLC_ENCODING_BIPHASE_LEVEL; break;
1590         default: return -EINVAL;
1591         }
1592
1593         switch (parity)
1594         {
1595         case PARITY_NONE:            new_crctype = HDLC_CRC_NONE; break;
1596         case PARITY_CRC16_PR1_CCITT: new_crctype = HDLC_CRC_16_CCITT; break;
1597         case PARITY_CRC32_PR1_CCITT: new_crctype = HDLC_CRC_32_CCITT; break;
1598         default: return -EINVAL;
1599         }
1600
1601         info->params.encoding = new_encoding;
1602         info->params.crc_type = new_crctype;
1603
1604         /* if network interface up, reprogram hardware */
1605         if (info->netcount)
1606                 program_hw(info);
1607
1608         return 0;
1609 }
1610
1611 /**
1612  * called by generic HDLC layer to send frame
1613  *
1614  * skb  socket buffer containing HDLC frame
1615  * dev  pointer to network device structure
1616  *
1617  * returns 0 if success, otherwise error code
1618  */
1619 static int hdlcdev_xmit(struct sk_buff *skb, struct net_device *dev)
1620 {
1621         SLMP_INFO *info = dev_to_port(dev);
1622         unsigned long flags;
1623
1624         if (debug_level >= DEBUG_LEVEL_INFO)
1625                 printk(KERN_INFO "%s:hdlc_xmit(%s)\n",__FILE__,dev->name);
1626
1627         /* stop sending until this frame completes */
1628         netif_stop_queue(dev);
1629
1630         /* copy data to device buffers */
1631         info->tx_count = skb->len;
1632         tx_load_dma_buffer(info, skb->data, skb->len);
1633
1634         /* update network statistics */
1635         dev->stats.tx_packets++;
1636         dev->stats.tx_bytes += skb->len;
1637
1638         /* done with socket buffer, so free it */
1639         dev_kfree_skb(skb);
1640
1641         /* save start time for transmit timeout detection */
1642         dev->trans_start = jiffies;
1643
1644         /* start hardware transmitter if necessary */
1645         spin_lock_irqsave(&info->lock,flags);
1646         if (!info->tx_active)
1647                 tx_start(info);
1648         spin_unlock_irqrestore(&info->lock,flags);
1649
1650         return 0;
1651 }
1652
1653 /**
1654  * called by network layer when interface enabled
1655  * claim resources and initialize hardware
1656  *
1657  * dev  pointer to network device structure
1658  *
1659  * returns 0 if success, otherwise error code
1660  */
1661 static int hdlcdev_open(struct net_device *dev)
1662 {
1663         SLMP_INFO *info = dev_to_port(dev);
1664         int rc;
1665         unsigned long flags;
1666
1667         if (debug_level >= DEBUG_LEVEL_INFO)
1668                 printk("%s:hdlcdev_open(%s)\n",__FILE__,dev->name);
1669
1670         /* generic HDLC layer open processing */
1671         if ((rc = hdlc_open(dev)))
1672                 return rc;
1673
1674         /* arbitrate between network and tty opens */
1675         spin_lock_irqsave(&info->netlock, flags);
1676         if (info->port.count != 0 || info->netcount != 0) {
1677                 printk(KERN_WARNING "%s: hdlc_open returning busy\n", dev->name);
1678                 spin_unlock_irqrestore(&info->netlock, flags);
1679                 return -EBUSY;
1680         }
1681         info->netcount=1;
1682         spin_unlock_irqrestore(&info->netlock, flags);
1683
1684         /* claim resources and init adapter */
1685         if ((rc = startup(info)) != 0) {
1686                 spin_lock_irqsave(&info->netlock, flags);
1687                 info->netcount=0;
1688                 spin_unlock_irqrestore(&info->netlock, flags);
1689                 return rc;
1690         }
1691
1692         /* assert DTR and RTS, apply hardware settings */
1693         info->serial_signals |= SerialSignal_RTS + SerialSignal_DTR;
1694         program_hw(info);
1695
1696         /* enable network layer transmit */
1697         dev->trans_start = jiffies;
1698         netif_start_queue(dev);
1699
1700         /* inform generic HDLC layer of current DCD status */
1701         spin_lock_irqsave(&info->lock, flags);
1702         get_signals(info);
1703         spin_unlock_irqrestore(&info->lock, flags);
1704         if (info->serial_signals & SerialSignal_DCD)
1705                 netif_carrier_on(dev);
1706         else
1707                 netif_carrier_off(dev);
1708         return 0;
1709 }
1710
1711 /**
1712  * called by network layer when interface is disabled
1713  * shutdown hardware and release resources
1714  *
1715  * dev  pointer to network device structure
1716  *
1717  * returns 0 if success, otherwise error code
1718  */
1719 static int hdlcdev_close(struct net_device *dev)
1720 {
1721         SLMP_INFO *info = dev_to_port(dev);
1722         unsigned long flags;
1723
1724         if (debug_level >= DEBUG_LEVEL_INFO)
1725                 printk("%s:hdlcdev_close(%s)\n",__FILE__,dev->name);
1726
1727         netif_stop_queue(dev);
1728
1729         /* shutdown adapter and release resources */
1730         shutdown(info);
1731
1732         hdlc_close(dev);
1733
1734         spin_lock_irqsave(&info->netlock, flags);
1735         info->netcount=0;
1736         spin_unlock_irqrestore(&info->netlock, flags);
1737
1738         return 0;
1739 }
1740
1741 /**
1742  * called by network layer to process IOCTL call to network device
1743  *
1744  * dev  pointer to network device structure
1745  * ifr  pointer to network interface request structure
1746  * cmd  IOCTL command code
1747  *
1748  * returns 0 if success, otherwise error code
1749  */
1750 static int hdlcdev_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd)
1751 {
1752         const size_t size = sizeof(sync_serial_settings);
1753         sync_serial_settings new_line;
1754         sync_serial_settings __user *line = ifr->ifr_settings.ifs_ifsu.sync;
1755         SLMP_INFO *info = dev_to_port(dev);
1756         unsigned int flags;
1757
1758         if (debug_level >= DEBUG_LEVEL_INFO)
1759                 printk("%s:hdlcdev_ioctl(%s)\n",__FILE__,dev->name);
1760
1761         /* return error if TTY interface open */
1762         if (info->port.count)
1763                 return -EBUSY;
1764
1765         if (cmd != SIOCWANDEV)
1766                 return hdlc_ioctl(dev, ifr, cmd);
1767
1768         switch(ifr->ifr_settings.type) {
1769         case IF_GET_IFACE: /* return current sync_serial_settings */
1770
1771                 ifr->ifr_settings.type = IF_IFACE_SYNC_SERIAL;
1772                 if (ifr->ifr_settings.size < size) {
1773                         ifr->ifr_settings.size = size; /* data size wanted */
1774                         return -ENOBUFS;
1775                 }
1776
1777                 flags = info->params.flags & (HDLC_FLAG_RXC_RXCPIN | HDLC_FLAG_RXC_DPLL |
1778                                               HDLC_FLAG_RXC_BRG    | HDLC_FLAG_RXC_TXCPIN |
1779                                               HDLC_FLAG_TXC_TXCPIN | HDLC_FLAG_TXC_DPLL |
1780                                               HDLC_FLAG_TXC_BRG    | HDLC_FLAG_TXC_RXCPIN);
1781
1782                 switch (flags){
1783                 case (HDLC_FLAG_RXC_RXCPIN | HDLC_FLAG_TXC_TXCPIN): new_line.clock_type = CLOCK_EXT; break;
1784                 case (HDLC_FLAG_RXC_BRG    | HDLC_FLAG_TXC_BRG):    new_line.clock_type = CLOCK_INT; break;
1785                 case (HDLC_FLAG_RXC_RXCPIN | HDLC_FLAG_TXC_BRG):    new_line.clock_type = CLOCK_TXINT; break;
1786                 case (HDLC_FLAG_RXC_RXCPIN | HDLC_FLAG_TXC_RXCPIN): new_line.clock_type = CLOCK_TXFROMRX; break;
1787                 default: new_line.clock_type = CLOCK_DEFAULT;
1788                 }
1789
1790                 new_line.clock_rate = info->params.clock_speed;
1791                 new_line.loopback   = info->params.loopback ? 1:0;
1792
1793                 if (copy_to_user(line, &new_line, size))
1794                         return -EFAULT;
1795                 return 0;
1796
1797         case IF_IFACE_SYNC_SERIAL: /* set sync_serial_settings */
1798
1799                 if(!capable(CAP_NET_ADMIN))
1800                         return -EPERM;
1801                 if (copy_from_user(&new_line, line, size))
1802                         return -EFAULT;
1803
1804                 switch (new_line.clock_type)
1805                 {
1806                 case CLOCK_EXT:      flags = HDLC_FLAG_RXC_RXCPIN | HDLC_FLAG_TXC_TXCPIN; break;
1807                 case CLOCK_TXFROMRX: flags = HDLC_FLAG_RXC_RXCPIN | HDLC_FLAG_TXC_RXCPIN; break;
1808                 case CLOCK_INT:      flags = HDLC_FLAG_RXC_BRG    | HDLC_FLAG_TXC_BRG;    break;
1809                 case CLOCK_TXINT:    flags = HDLC_FLAG_RXC_RXCPIN | HDLC_FLAG_TXC_BRG;    break;
1810                 case CLOCK_DEFAULT:  flags = info->params.flags &
1811                                              (HDLC_FLAG_RXC_RXCPIN | HDLC_FLAG_RXC_DPLL |
1812                                               HDLC_FLAG_RXC_BRG    | HDLC_FLAG_RXC_TXCPIN |
1813                                               HDLC_FLAG_TXC_TXCPIN | HDLC_FLAG_TXC_DPLL |
1814                                               HDLC_FLAG_TXC_BRG    | HDLC_FLAG_TXC_RXCPIN); break;
1815                 default: return -EINVAL;
1816                 }
1817
1818                 if (new_line.loopback != 0 && new_line.loopback != 1)
1819                         return -EINVAL;
1820
1821                 info->params.flags &= ~(HDLC_FLAG_RXC_RXCPIN | HDLC_FLAG_RXC_DPLL |
1822                                         HDLC_FLAG_RXC_BRG    | HDLC_FLAG_RXC_TXCPIN |
1823                                         HDLC_FLAG_TXC_TXCPIN | HDLC_FLAG_TXC_DPLL |
1824                                         HDLC_FLAG_TXC_BRG    | HDLC_FLAG_TXC_RXCPIN);
1825                 info->params.flags |= flags;
1826
1827                 info->params.loopback = new_line.loopback;
1828
1829                 if (flags & (HDLC_FLAG_RXC_BRG | HDLC_FLAG_TXC_BRG))
1830                         info->params.clock_speed = new_line.clock_rate;
1831                 else
1832                         info->params.clock_speed = 0;
1833
1834                 /* if network interface up, reprogram hardware */
1835                 if (info->netcount)
1836                         program_hw(info);
1837                 return 0;
1838
1839         default:
1840                 return hdlc_ioctl(dev, ifr, cmd);
1841         }
1842 }
1843
1844 /**
1845  * called by network layer when transmit timeout is detected
1846  *
1847  * dev  pointer to network device structure
1848  */
1849 static void hdlcdev_tx_timeout(struct net_device *dev)
1850 {
1851         SLMP_INFO *info = dev_to_port(dev);
1852         unsigned long flags;
1853
1854         if (debug_level >= DEBUG_LEVEL_INFO)
1855                 printk("hdlcdev_tx_timeout(%s)\n",dev->name);
1856
1857         dev->stats.tx_errors++;
1858         dev->stats.tx_aborted_errors++;
1859
1860         spin_lock_irqsave(&info->lock,flags);
1861         tx_stop(info);
1862         spin_unlock_irqrestore(&info->lock,flags);
1863
1864         netif_wake_queue(dev);
1865 }
1866
1867 /**
1868  * called by device driver when transmit completes
1869  * reenable network layer transmit if stopped
1870  *
1871  * info  pointer to device instance information
1872  */
1873 static void hdlcdev_tx_done(SLMP_INFO *info)
1874 {
1875         if (netif_queue_stopped(info->netdev))
1876                 netif_wake_queue(info->netdev);
1877 }
1878
1879 /**
1880  * called by device driver when frame received
1881  * pass frame to network layer
1882  *
1883  * info  pointer to device instance information
1884  * buf   pointer to buffer contianing frame data
1885  * size  count of data bytes in buf
1886  */
1887 static void hdlcdev_rx(SLMP_INFO *info, char *buf, int size)
1888 {
1889         struct sk_buff *skb = dev_alloc_skb(size);
1890         struct net_device *dev = info->netdev;
1891
1892         if (debug_level >= DEBUG_LEVEL_INFO)
1893                 printk("hdlcdev_rx(%s)\n",dev->name);
1894
1895         if (skb == NULL) {
1896                 printk(KERN_NOTICE "%s: can't alloc skb, dropping packet\n",
1897                        dev->name);
1898                 dev->stats.rx_dropped++;
1899                 return;
1900         }
1901
1902         memcpy(skb_put(skb, size), buf, size);
1903
1904         skb->protocol = hdlc_type_trans(skb, dev);
1905
1906         dev->stats.rx_packets++;
1907         dev->stats.rx_bytes += size;
1908
1909         netif_rx(skb);
1910
1911         dev->last_rx = jiffies;
1912 }
1913
1914 /**
1915  * called by device driver when adding device instance
1916  * do generic HDLC initialization
1917  *
1918  * info  pointer to device instance information
1919  *
1920  * returns 0 if success, otherwise error code
1921  */
1922 static int hdlcdev_init(SLMP_INFO *info)
1923 {
1924         int rc;
1925         struct net_device *dev;
1926         hdlc_device *hdlc;
1927
1928         /* allocate and initialize network and HDLC layer objects */
1929
1930         if (!(dev = alloc_hdlcdev(info))) {
1931                 printk(KERN_ERR "%s:hdlc device allocation failure\n",__FILE__);
1932                 return -ENOMEM;
1933         }
1934
1935         /* for network layer reporting purposes only */
1936         dev->mem_start = info->phys_sca_base;
1937         dev->mem_end   = info->phys_sca_base + SCA_BASE_SIZE - 1;
1938         dev->irq       = info->irq_level;
1939
1940         /* network layer callbacks and settings */
1941         dev->do_ioctl       = hdlcdev_ioctl;
1942         dev->open           = hdlcdev_open;
1943         dev->stop           = hdlcdev_close;
1944         dev->tx_timeout     = hdlcdev_tx_timeout;
1945         dev->watchdog_timeo = 10*HZ;
1946         dev->tx_queue_len   = 50;
1947
1948         /* generic HDLC layer callbacks and settings */
1949         hdlc         = dev_to_hdlc(dev);
1950         hdlc->attach = hdlcdev_attach;
1951         hdlc->xmit   = hdlcdev_xmit;
1952
1953         /* register objects with HDLC layer */
1954         if ((rc = register_hdlc_device(dev))) {
1955                 printk(KERN_WARNING "%s:unable to register hdlc device\n",__FILE__);
1956                 free_netdev(dev);
1957                 return rc;
1958         }
1959
1960         info->netdev = dev;
1961         return 0;
1962 }
1963
1964 /**
1965  * called by device driver when removing device instance
1966  * do generic HDLC cleanup
1967  *
1968  * info  pointer to device instance information
1969  */
1970 static void hdlcdev_exit(SLMP_INFO *info)
1971 {
1972         unregister_hdlc_device(info->netdev);
1973         free_netdev(info->netdev);
1974         info->netdev = NULL;
1975 }
1976
1977 #endif /* CONFIG_HDLC */
1978
1979
1980 /* Return next bottom half action to perform.
1981  * Return Value:        BH action code or 0 if nothing to do.
1982  */
1983 static int bh_action(SLMP_INFO *info)
1984 {
1985         unsigned long flags;
1986         int rc = 0;
1987
1988         spin_lock_irqsave(&info->lock,flags);
1989
1990         if (info->pending_bh & BH_RECEIVE) {
1991                 info->pending_bh &= ~BH_RECEIVE;
1992                 rc = BH_RECEIVE;
1993         } else if (info->pending_bh & BH_TRANSMIT) {
1994                 info->pending_bh &= ~BH_TRANSMIT;
1995                 rc = BH_TRANSMIT;
1996         } else if (info->pending_bh & BH_STATUS) {
1997                 info->pending_bh &= ~BH_STATUS;
1998                 rc = BH_STATUS;
1999         }
2000
2001         if (!rc) {
2002                 /* Mark BH routine as complete */
2003                 info->bh_running = false;
2004                 info->bh_requested = false;
2005         }
2006
2007         spin_unlock_irqrestore(&info->lock,flags);
2008
2009         return rc;
2010 }
2011
2012 /* Perform bottom half processing of work items queued by ISR.
2013  */
2014 static void bh_handler(struct work_struct *work)
2015 {
2016         SLMP_INFO *info = container_of(work, SLMP_INFO, task);
2017         int action;
2018
2019         if (!info)
2020                 return;
2021
2022         if ( debug_level >= DEBUG_LEVEL_BH )
2023                 printk( "%s(%d):%s bh_handler() entry\n",
2024                         __FILE__,__LINE__,info->device_name);
2025
2026         info->bh_running = true;
2027
2028         while((action = bh_action(info)) != 0) {
2029
2030                 /* Process work item */
2031                 if ( debug_level >= DEBUG_LEVEL_BH )
2032                         printk( "%s(%d):%s bh_handler() work item action=%d\n",
2033                                 __FILE__,__LINE__,info->device_name, action);
2034
2035                 switch (action) {
2036
2037                 case BH_RECEIVE:
2038                         bh_receive(info);
2039                         break;
2040                 case BH_TRANSMIT:
2041                         bh_transmit(info);
2042                         break;
2043                 case BH_STATUS:
2044                         bh_status(info);
2045                         break;
2046                 default:
2047                         /* unknown work item ID */
2048                         printk("%s(%d):%s Unknown work item ID=%08X!\n",
2049                                 __FILE__,__LINE__,info->device_name,action);
2050                         break;
2051                 }
2052         }
2053
2054         if ( debug_level >= DEBUG_LEVEL_BH )
2055                 printk( "%s(%d):%s bh_handler() exit\n",
2056                         __FILE__,__LINE__,info->device_name);
2057 }
2058
2059 static void bh_receive(SLMP_INFO *info)
2060 {
2061         if ( debug_level >= DEBUG_LEVEL_BH )
2062                 printk( "%s(%d):%s bh_receive()\n",
2063                         __FILE__,__LINE__,info->device_name);
2064
2065         while( rx_get_frame(info) );
2066 }
2067
2068 static void bh_transmit(SLMP_INFO *info)
2069 {
2070         struct tty_struct *tty = info->port.tty;
2071
2072         if ( debug_level >= DEBUG_LEVEL_BH )
2073                 printk( "%s(%d):%s bh_transmit() entry\n",
2074                         __FILE__,__LINE__,info->device_name);
2075
2076         if (tty)
2077                 tty_wakeup(tty);
2078 }
2079
2080 static void bh_status(SLMP_INFO *info)
2081 {
2082         if ( debug_level >= DEBUG_LEVEL_BH )
2083                 printk( "%s(%d):%s bh_status() entry\n",
2084                         __FILE__,__LINE__,info->device_name);
2085
2086         info->ri_chkcount = 0;
2087         info->dsr_chkcount = 0;
2088         info->dcd_chkcount = 0;
2089         info->cts_chkcount = 0;
2090 }
2091
2092 static void isr_timer(SLMP_INFO * info)
2093 {
2094         unsigned char timer = (info->port_num & 1) ? TIMER2 : TIMER0;
2095
2096         /* IER2<7..4> = timer<3..0> interrupt enables (0=disabled) */
2097         write_reg(info, IER2, 0);
2098
2099         /* TMCS, Timer Control/Status Register
2100          *
2101          * 07      CMF, Compare match flag (read only) 1=match
2102          * 06      ECMI, CMF Interrupt Enable: 0=disabled
2103          * 05      Reserved, must be 0
2104          * 04      TME, Timer Enable
2105          * 03..00  Reserved, must be 0
2106          *
2107          * 0000 0000
2108          */
2109         write_reg(info, (unsigned char)(timer + TMCS), 0);
2110
2111         info->irq_occurred = true;
2112
2113         if ( debug_level >= DEBUG_LEVEL_ISR )
2114                 printk("%s(%d):%s isr_timer()\n",
2115                         __FILE__,__LINE__,info->device_name);
2116 }
2117
2118 static void isr_rxint(SLMP_INFO * info)
2119 {
2120         struct tty_struct *tty = info->port.tty;
2121         struct  mgsl_icount *icount = &info->icount;
2122         unsigned char status = read_reg(info, SR1) & info->ie1_value & (FLGD + IDLD + CDCD + BRKD);
2123         unsigned char status2 = read_reg(info, SR2) & info->ie2_value & OVRN;
2124
2125         /* clear status bits */
2126         if (status)
2127                 write_reg(info, SR1, status);
2128
2129         if (status2)
2130                 write_reg(info, SR2, status2);
2131
2132         if ( debug_level >= DEBUG_LEVEL_ISR )
2133                 printk("%s(%d):%s isr_rxint status=%02X %02x\n",
2134                         __FILE__,__LINE__,info->device_name,status,status2);
2135
2136         if (info->params.mode == MGSL_MODE_ASYNC) {
2137                 if (status & BRKD) {
2138                         icount->brk++;
2139
2140                         /* process break detection if tty control
2141                          * is not set to ignore it
2142                          */
2143                         if ( tty ) {
2144                                 if (!(status & info->ignore_status_mask1)) {
2145                                         if (info->read_status_mask1 & BRKD) {
2146                                                 tty_insert_flip_char(tty, 0, TTY_BREAK);
2147                                                 if (info->port.flags & ASYNC_SAK)
2148                                                         do_SAK(tty);
2149                                         }
2150                                 }
2151                         }
2152                 }
2153         }
2154         else {
2155                 if (status & (FLGD|IDLD)) {
2156                         if (status & FLGD)
2157                                 info->icount.exithunt++;
2158                         else if (status & IDLD)
2159                                 info->icount.rxidle++;
2160                         wake_up_interruptible(&info->event_wait_q);
2161                 }
2162         }
2163
2164         if (status & CDCD) {
2165                 /* simulate a common modem status change interrupt
2166                  * for our handler
2167                  */
2168                 get_signals( info );
2169                 isr_io_pin(info,
2170                         MISCSTATUS_DCD_LATCHED|(info->serial_signals&SerialSignal_DCD));
2171         }
2172 }
2173
2174 /*
2175  * handle async rx data interrupts
2176  */
2177 static void isr_rxrdy(SLMP_INFO * info)
2178 {
2179         u16 status;
2180         unsigned char DataByte;
2181         struct tty_struct *tty = info->port.tty;
2182         struct  mgsl_icount *icount = &info->icount;
2183
2184         if ( debug_level >= DEBUG_LEVEL_ISR )
2185                 printk("%s(%d):%s isr_rxrdy\n",
2186                         __FILE__,__LINE__,info->device_name);
2187
2188         while((status = read_reg(info,CST0)) & BIT0)
2189         {
2190                 int flag = 0;
2191                 bool over = false;
2192                 DataByte = read_reg(info,TRB);
2193
2194                 icount->rx++;
2195
2196                 if ( status & (PE + FRME + OVRN) ) {
2197                         printk("%s(%d):%s rxerr=%04X\n",
2198                                 __FILE__,__LINE__,info->device_name,status);
2199
2200                         /* update error statistics */
2201                         if (status & PE)
2202                                 icount->parity++;
2203                         else if (status & FRME)
2204                                 icount->frame++;
2205                         else if (status & OVRN)
2206                                 icount->overrun++;
2207
2208                         /* discard char if tty control flags say so */
2209                         if (status & info->ignore_status_mask2)
2210                                 continue;
2211
2212                         status &= info->read_status_mask2;
2213
2214                         if ( tty ) {
2215                                 if (status & PE)
2216                                         flag = TTY_PARITY;
2217                                 else if (status & FRME)
2218                                         flag = TTY_FRAME;
2219                                 if (status & OVRN) {
2220                                         /* Overrun is special, since it's
2221                                          * reported immediately, and doesn't
2222                                          * affect the current character
2223                                          */
2224                                         over = true;
2225                                 }
2226                         }
2227                 }       /* end of if (error) */
2228
2229                 if ( tty ) {
2230                         tty_insert_flip_char(tty, DataByte, flag);
2231                         if (over)
2232                                 tty_insert_flip_char(tty, 0, TTY_OVERRUN);
2233                 }
2234         }
2235
2236         if ( debug_level >= DEBUG_LEVEL_ISR ) {
2237                 printk("%s(%d):%s rx=%d brk=%d parity=%d frame=%d overrun=%d\n",
2238                         __FILE__,__LINE__,info->device_name,
2239                         icount->rx,icount->brk,icount->parity,
2240                         icount->frame,icount->overrun);
2241         }
2242
2243         if ( tty )
2244                 tty_flip_buffer_push(tty);
2245 }
2246
2247 static void isr_txeom(SLMP_INFO * info, unsigned char status)
2248 {
2249         if ( debug_level >= DEBUG_LEVEL_ISR )
2250                 printk("%s(%d):%s isr_txeom status=%02x\n",
2251                         __FILE__,__LINE__,info->device_name,status);
2252
2253         write_reg(info, TXDMA + DIR, 0x00); /* disable Tx DMA IRQs */
2254         write_reg(info, TXDMA + DSR, 0xc0); /* clear IRQs and disable DMA */
2255         write_reg(info, TXDMA + DCMD, SWABORT); /* reset/init DMA channel */
2256
2257         if (status & UDRN) {
2258                 write_reg(info, CMD, TXRESET);
2259                 write_reg(info, CMD, TXENABLE);
2260         } else
2261                 write_reg(info, CMD, TXBUFCLR);
2262
2263         /* disable and clear tx interrupts */
2264         info->ie0_value &= ~TXRDYE;
2265         info->ie1_value &= ~(IDLE + UDRN);
2266         write_reg16(info, IE0, (unsigned short)((info->ie1_value << 8) + info->ie0_value));
2267         write_reg(info, SR1, (unsigned char)(UDRN + IDLE));
2268
2269         if ( info->tx_active ) {
2270                 if (info->params.mode != MGSL_MODE_ASYNC) {
2271                         if (status & UDRN)
2272                                 info->icount.txunder++;
2273                         else if (status & IDLE)
2274                                 info->icount.txok++;
2275                 }
2276
2277                 info->tx_active = false;
2278                 info->tx_count = info->tx_put = info->tx_get = 0;
2279
2280                 del_timer(&info->tx_timer);
2281
2282                 if (info->params.mode != MGSL_MODE_ASYNC && info->drop_rts_on_tx_done ) {
2283                         info->serial_signals &= ~SerialSignal_RTS;
2284                         info->drop_rts_on_tx_done = false;
2285                         set_signals(info);
2286                 }
2287
2288 #if SYNCLINK_GENERIC_HDLC
2289                 if (info->netcount)
2290                         hdlcdev_tx_done(info);
2291                 else
2292 #endif
2293                 {
2294                         if (info->port.tty && (info->port.tty->stopped || info->port.tty->hw_stopped)) {
2295                                 tx_stop(info);
2296                                 return;
2297                         }
2298                         info->pending_bh |= BH_TRANSMIT;
2299                 }
2300         }
2301 }
2302
2303
2304 /*
2305  * handle tx status interrupts
2306  */
2307 static void isr_txint(SLMP_INFO * info)
2308 {
2309         unsigned char status = read_reg(info, SR1) & info->ie1_value & (UDRN + IDLE + CCTS);
2310
2311         /* clear status bits */
2312         write_reg(info, SR1, status);
2313
2314         if ( debug_level >= DEBUG_LEVEL_ISR )
2315                 printk("%s(%d):%s isr_txint status=%02x\n",
2316                         __FILE__,__LINE__,info->device_name,status);
2317
2318         if (status & (UDRN + IDLE))
2319                 isr_txeom(info, status);
2320
2321         if (status & CCTS) {
2322                 /* simulate a common modem status change interrupt
2323                  * for our handler
2324                  */
2325                 get_signals( info );
2326                 isr_io_pin(info,
2327                         MISCSTATUS_CTS_LATCHED|(info->serial_signals&SerialSignal_CTS));
2328
2329         }
2330 }
2331
2332 /*
2333  * handle async tx data interrupts
2334  */
2335 static void isr_txrdy(SLMP_INFO * info)
2336 {
2337         if ( debug_level >= DEBUG_LEVEL_ISR )
2338                 printk("%s(%d):%s isr_txrdy() tx_count=%d\n",
2339                         __FILE__,__LINE__,info->device_name,info->tx_count);
2340
2341         if (info->params.mode != MGSL_MODE_ASYNC) {
2342                 /* disable TXRDY IRQ, enable IDLE IRQ */
2343                 info->ie0_value &= ~TXRDYE;
2344                 info->ie1_value |= IDLE;
2345                 write_reg16(info, IE0, (unsigned short)((info->ie1_value << 8) + info->ie0_value));
2346                 return;
2347         }
2348
2349         if (info->port.tty && (info->port.tty->stopped || info->port.tty->hw_stopped)) {
2350                 tx_stop(info);
2351                 return;
2352         }
2353
2354         if ( info->tx_count )
2355                 tx_load_fifo( info );
2356         else {
2357                 info->tx_active = false;
2358                 info->ie0_value &= ~TXRDYE;
2359                 write_reg(info, IE0, info->ie0_value);
2360         }
2361
2362         if (info->tx_count < WAKEUP_CHARS)
2363                 info->pending_bh |= BH_TRANSMIT;
2364 }
2365
2366 static void isr_rxdmaok(SLMP_INFO * info)
2367 {
2368         /* BIT7 = EOT (end of transfer)
2369          * BIT6 = EOM (end of message/frame)
2370          */
2371         unsigned char status = read_reg(info,RXDMA + DSR) & 0xc0;
2372
2373         /* clear IRQ (BIT0 must be 1 to prevent clearing DE bit) */
2374         write_reg(info, RXDMA + DSR, (unsigned char)(status | 1));
2375
2376         if ( debug_level >= DEBUG_LEVEL_ISR )
2377                 printk("%s(%d):%s isr_rxdmaok(), status=%02x\n",
2378                         __FILE__,__LINE__,info->device_name,status);
2379
2380         info->pending_bh |= BH_RECEIVE;
2381 }
2382
2383 static void isr_rxdmaerror(SLMP_INFO * info)
2384 {
2385         /* BIT5 = BOF (buffer overflow)
2386          * BIT4 = COF (counter overflow)
2387          */
2388         unsigned char status = read_reg(info,RXDMA + DSR) & 0x30;
2389
2390         /* clear IRQ (BIT0 must be 1 to prevent clearing DE bit) */
2391         write_reg(info, RXDMA + DSR, (unsigned char)(status | 1));
2392
2393         if ( debug_level >= DEBUG_LEVEL_ISR )
2394                 printk("%s(%d):%s isr_rxdmaerror(), status=%02x\n",
2395                         __FILE__,__LINE__,info->device_name,status);
2396
2397         info->rx_overflow = true;
2398         info->pending_bh |= BH_RECEIVE;
2399 }
2400
2401 static void isr_txdmaok(SLMP_INFO * info)
2402 {
2403         unsigned char status_reg1 = read_reg(info, SR1);
2404
2405         write_reg(info, TXDMA + DIR, 0x00);     /* disable Tx DMA IRQs */
2406         write_reg(info, TXDMA + DSR, 0xc0); /* clear IRQs and disable DMA */
2407         write_reg(info, TXDMA + DCMD, SWABORT); /* reset/init DMA channel */
2408
2409         if ( debug_level >= DEBUG_LEVEL_ISR )
2410                 printk("%s(%d):%s isr_txdmaok(), status=%02x\n",
2411                         __FILE__,__LINE__,info->device_name,status_reg1);
2412
2413         /* program TXRDY as FIFO empty flag, enable TXRDY IRQ */
2414         write_reg16(info, TRC0, 0);
2415         info->ie0_value |= TXRDYE;
2416         write_reg(info, IE0, info->ie0_value);
2417 }
2418
2419 static void isr_txdmaerror(SLMP_INFO * info)
2420 {
2421         /* BIT5 = BOF (buffer overflow)
2422          * BIT4 = COF (counter overflow)
2423          */
2424         unsigned char status = read_reg(info,TXDMA + DSR) & 0x30;
2425
2426         /* clear IRQ (BIT0 must be 1 to prevent clearing DE bit) */
2427         write_reg(info, TXDMA + DSR, (unsigned char)(status | 1));
2428
2429         if ( debug_level >= DEBUG_LEVEL_ISR )
2430                 printk("%s(%d):%s isr_txdmaerror(), status=%02x\n",
2431                         __FILE__,__LINE__,info->device_name,status);
2432 }
2433
2434 /* handle input serial signal changes
2435  */
2436 static void isr_io_pin( SLMP_INFO *info, u16 status )
2437 {
2438         struct  mgsl_icount *icount;
2439
2440         if ( debug_level >= DEBUG_LEVEL_ISR )
2441                 printk("%s(%d):isr_io_pin status=%04X\n",
2442                         __FILE__,__LINE__,status);
2443
2444         if (status & (MISCSTATUS_CTS_LATCHED | MISCSTATUS_DCD_LATCHED |
2445                       MISCSTATUS_DSR_LATCHED | MISCSTATUS_RI_LATCHED) ) {
2446                 icount = &info->icount;
2447                 /* update input line counters */
2448                 if (status & MISCSTATUS_RI_LATCHED) {
2449                         icount->rng++;
2450                         if ( status & SerialSignal_RI )
2451                                 info->input_signal_events.ri_up++;
2452                         else
2453                                 info->input_signal_events.ri_down++;
2454                 }
2455                 if (status & MISCSTATUS_DSR_LATCHED) {
2456                         icount->dsr++;
2457                         if ( status & SerialSignal_DSR )
2458                                 info->input_signal_events.dsr_up++;
2459                         else
2460                                 info->input_signal_events.dsr_down++;
2461                 }
2462                 if (status & MISCSTATUS_DCD_LATCHED) {
2463                         if ((info->dcd_chkcount)++ >= IO_PIN_SHUTDOWN_LIMIT) {
2464                                 info->ie1_value &= ~CDCD;
2465                                 write_reg(info, IE1, info->ie1_value);
2466                         }
2467                         icount->dcd++;
2468                         if (status & SerialSignal_DCD) {
2469                                 info->input_signal_events.dcd_up++;
2470                         } else
2471                                 info->input_signal_events.dcd_down++;
2472 #if SYNCLINK_GENERIC_HDLC
2473                         if (info->netcount) {
2474                                 if (status & SerialSignal_DCD)
2475                                         netif_carrier_on(info->netdev);
2476                                 else
2477                                         netif_carrier_off(info->netdev);
2478                         }
2479 #endif
2480                 }
2481                 if (status & MISCSTATUS_CTS_LATCHED)
2482                 {
2483                         if ((info->cts_chkcount)++ >= IO_PIN_SHUTDOWN_LIMIT) {
2484                                 info->ie1_value &= ~CCTS;
2485                                 write_reg(info, IE1, info->ie1_value);
2486                         }
2487                         icount->cts++;
2488                         if ( status & SerialSignal_CTS )
2489                                 info->input_signal_events.cts_up++;
2490                         else
2491                                 info->input_signal_events.cts_down++;
2492                 }
2493                 wake_up_interruptible(&info->status_event_wait_q);
2494                 wake_up_interruptible(&info->event_wait_q);
2495
2496                 if ( (info->port.flags & ASYNC_CHECK_CD) &&
2497                      (status & MISCSTATUS_DCD_LATCHED) ) {
2498                         if ( debug_level >= DEBUG_LEVEL_ISR )
2499                                 printk("%s CD now %s...", info->device_name,
2500                                        (status & SerialSignal_DCD) ? "on" : "off");
2501                         if (status & SerialSignal_DCD)
2502                                 wake_up_interruptible(&info->port.open_wait);
2503                         else {
2504                                 if ( debug_level >= DEBUG_LEVEL_ISR )
2505                                         printk("doing serial hangup...");
2506                                 if (info->port.tty)
2507                                         tty_hangup(info->port.tty);
2508                         }
2509                 }
2510
2511                 if ( (info->port.flags & ASYNC_CTS_FLOW) &&
2512                      (status & MISCSTATUS_CTS_LATCHED) ) {
2513                         if ( info->port.tty ) {
2514                                 if (info->port.tty->hw_stopped) {
2515                                         if (status & SerialSignal_CTS) {
2516                                                 if ( debug_level >= DEBUG_LEVEL_ISR )
2517                                                         printk("CTS tx start...");
2518                                                 info->port.tty->hw_stopped = 0;
2519                                                 tx_start(info);
2520                                                 info->pending_bh |= BH_TRANSMIT;
2521                                                 return;
2522                                         }
2523                                 } else {
2524                                         if (!(status & SerialSignal_CTS)) {
2525                                                 if ( debug_level >= DEBUG_LEVEL_ISR )
2526                                                         printk("CTS tx stop...");
2527                                                 info->port.tty->hw_stopped = 1;
2528                                                 tx_stop(info);
2529                                         }
2530                                 }
2531                         }
2532                 }
2533         }
2534
2535         info->pending_bh |= BH_STATUS;
2536 }
2537
2538 /* Interrupt service routine entry point.
2539  *
2540  * Arguments:
2541  *      irq             interrupt number that caused interrupt
2542  *      dev_id          device ID supplied during interrupt registration
2543  *      regs            interrupted processor context
2544  */
2545 static irqreturn_t synclinkmp_interrupt(int dummy, void *dev_id)
2546 {
2547         SLMP_INFO *info = dev_id;
2548         unsigned char status, status0, status1=0;
2549         unsigned char dmastatus, dmastatus0, dmastatus1=0;
2550         unsigned char timerstatus0, timerstatus1=0;
2551         unsigned char shift;
2552         unsigned int i;
2553         unsigned short tmp;
2554
2555         if ( debug_level >= DEBUG_LEVEL_ISR )
2556                 printk(KERN_DEBUG "%s(%d): synclinkmp_interrupt(%d)entry.\n",
2557                         __FILE__, __LINE__, info->irq_level);
2558
2559         spin_lock(&info->lock);
2560
2561         for(;;) {
2562
2563                 /* get status for SCA0 (ports 0-1) */
2564                 tmp = read_reg16(info, ISR0);   /* get ISR0 and ISR1 in one read */
2565                 status0 = (unsigned char)tmp;
2566                 dmastatus0 = (unsigned char)(tmp>>8);
2567                 timerstatus0 = read_reg(info, ISR2);
2568
2569                 if ( debug_level >= DEBUG_LEVEL_ISR )
2570                         printk(KERN_DEBUG "%s(%d):%s status0=%02x, dmastatus0=%02x, timerstatus0=%02x\n",
2571                                 __FILE__, __LINE__, info->device_name,
2572                                 status0, dmastatus0, timerstatus0);
2573
2574                 if (info->port_count == 4) {
2575                         /* get status for SCA1 (ports 2-3) */
2576                         tmp = read_reg16(info->port_array[2], ISR0);
2577                         status1 = (unsigned char)tmp;
2578                         dmastatus1 = (unsigned char)(tmp>>8);
2579                         timerstatus1 = read_reg(info->port_array[2], ISR2);
2580
2581                         if ( debug_level >= DEBUG_LEVEL_ISR )
2582                                 printk("%s(%d):%s status1=%02x, dmastatus1=%02x, timerstatus1=%02x\n",
2583                                         __FILE__,__LINE__,info->device_name,
2584                                         status1,dmastatus1,timerstatus1);
2585                 }
2586
2587                 if (!status0 && !dmastatus0 && !timerstatus0 &&
2588                          !status1 && !dmastatus1 && !timerstatus1)
2589                         break;
2590
2591                 for(i=0; i < info->port_count ; i++) {
2592                         if (info->port_array[i] == NULL)
2593                                 continue;
2594                         if (i < 2) {
2595                                 status = status0;
2596                                 dmastatus = dmastatus0;
2597                         } else {
2598                                 status = status1;
2599                                 dmastatus = dmastatus1;
2600                         }
2601
2602                         shift = i & 1 ? 4 :0;
2603
2604                         if (status & BIT0 << shift)
2605                                 isr_rxrdy(info->port_array[i]);
2606                         if (status & BIT1 << shift)
2607                                 isr_txrdy(info->port_array[i]);
2608                         if (status & BIT2 << shift)
2609                                 isr_rxint(info->port_array[i]);
2610                         if (status & BIT3 << shift)
2611                                 isr_txint(info->port_array[i]);
2612
2613                         if (dmastatus & BIT0 << shift)
2614                                 isr_rxdmaerror(info->port_array[i]);
2615                         if (dmastatus & BIT1 << shift)
2616                                 isr_rxdmaok(info->port_array[i]);
2617                         if (dmastatus & BIT2 << shift)
2618                                 isr_txdmaerror(info->port_array[i]);
2619                         if (dmastatus & BIT3 << shift)
2620                                 isr_txdmaok(info->port_array[i]);
2621                 }
2622
2623                 if (timerstatus0 & (BIT5 | BIT4))
2624                         isr_timer(info->port_array[0]);
2625                 if (timerstatus0 & (BIT7 | BIT6))
2626                         isr_timer(info->port_array[1]);
2627                 if (timerstatus1 & (BIT5 | BIT4))
2628                         isr_timer(info->port_array[2]);
2629                 if (timerstatus1 & (BIT7 | BIT6))
2630                         isr_timer(info->port_array[3]);
2631         }
2632
2633         for(i=0; i < info->port_count ; i++) {
2634                 SLMP_INFO * port = info->port_array[i];
2635
2636                 /* Request bottom half processing if there's something
2637                  * for it to do and the bh is not already running.
2638                  *
2639                  * Note: startup adapter diags require interrupts.
2640                  * do not request bottom half processing if the
2641                  * device is not open in a normal mode.
2642                  */
2643                 if ( port && (port->port.count || port->netcount) &&
2644                      port->pending_bh && !port->bh_running &&
2645                      !port->bh_requested ) {
2646                         if ( debug_level >= DEBUG_LEVEL_ISR )
2647                                 printk("%s(%d):%s queueing bh task.\n",
2648                                         __FILE__,__LINE__,port->device_name);
2649                         schedule_work(&port->task);
2650                         port->bh_requested = true;
2651                 }
2652         }
2653
2654         spin_unlock(&info->lock);
2655
2656         if ( debug_level >= DEBUG_LEVEL_ISR )
2657                 printk(KERN_DEBUG "%s(%d):synclinkmp_interrupt(%d)exit.\n",
2658                         __FILE__, __LINE__, info->irq_level);
2659         return IRQ_HANDLED;
2660 }
2661
2662 /* Initialize and start device.
2663  */
2664 static int startup(SLMP_INFO * info)
2665 {
2666         if ( debug_level >= DEBUG_LEVEL_INFO )
2667                 printk("%s(%d):%s tx_releaseup()\n",__FILE__,__LINE__,info->device_name);
2668
2669         if (info->port.flags & ASYNC_INITIALIZED)
2670                 return 0;
2671
2672         if (!info->tx_buf) {
2673                 info->tx_buf = kmalloc(info->max_frame_size, GFP_KERNEL);
2674                 if (!info->tx_buf) {
2675                         printk(KERN_ERR"%s(%d):%s can't allocate transmit buffer\n",
2676                                 __FILE__,__LINE__,info->device_name);
2677                         return -ENOMEM;
2678                 }
2679         }
2680
2681         info->pending_bh = 0;
2682
2683         memset(&info->icount, 0, sizeof(info->icount));
2684
2685         /* program hardware for current parameters */
2686         reset_port(info);
2687
2688         change_params(info);
2689
2690         mod_timer(&info->status_timer, jiffies + msecs_to_jiffies(10));
2691
2692         if (info->port.tty)
2693                 clear_bit(TTY_IO_ERROR, &info->port.tty->flags);
2694
2695         info->port.flags |= ASYNC_INITIALIZED;
2696
2697         return 0;
2698 }
2699
2700 /* Called by close() and hangup() to shutdown hardware
2701  */
2702 static void shutdown(SLMP_INFO * info)
2703 {
2704         unsigned long flags;
2705
2706         if (!(info->port.flags & ASYNC_INITIALIZED))
2707                 return;
2708
2709         if (debug_level >= DEBUG_LEVEL_INFO)
2710                 printk("%s(%d):%s synclinkmp_shutdown()\n",
2711                          __FILE__,__LINE__, info->device_name );
2712
2713         /* clear status wait queue because status changes */
2714         /* can't happen after shutting down the hardware */
2715         wake_up_interruptible(&info->status_event_wait_q);
2716         wake_up_interruptible(&info->event_wait_q);
2717
2718         del_timer(&info->tx_timer);
2719         del_timer(&info->status_timer);
2720
2721         kfree(info->tx_buf);
2722         info->tx_buf = NULL;
2723
2724         spin_lock_irqsave(&info->lock,flags);
2725
2726         reset_port(info);
2727
2728         if (!info->port.tty || info->port.tty->termios->c_cflag & HUPCL) {
2729                 info->serial_signals &= ~(SerialSignal_DTR + SerialSignal_RTS);
2730                 set_signals(info);
2731         }
2732
2733         spin_unlock_irqrestore(&info->lock,flags);
2734
2735         if (info->port.tty)
2736                 set_bit(TTY_IO_ERROR, &info->port.tty->flags);
2737
2738         info->port.flags &= ~ASYNC_INITIALIZED;
2739 }
2740
2741 static void program_hw(SLMP_INFO *info)
2742 {
2743         unsigned long flags;
2744
2745         spin_lock_irqsave(&info->lock,flags);
2746
2747         rx_stop(info);
2748         tx_stop(info);
2749
2750         info->tx_count = info->tx_put = info->tx_get = 0;
2751
2752         if (info->params.mode == MGSL_MODE_HDLC || info->netcount)
2753                 hdlc_mode(info);
2754         else
2755                 async_mode(info);
2756
2757         set_signals(info);
2758
2759         info->dcd_chkcount = 0;
2760         info->cts_chkcount = 0;
2761         info->ri_chkcount = 0;
2762         info->dsr_chkcount = 0;
2763
2764         info->ie1_value |= (CDCD|CCTS);
2765         write_reg(info, IE1, info->ie1_value);
2766
2767         get_signals(info);
2768
2769         if (info->netcount || (info->port.tty && info->port.tty->termios->c_cflag & CREAD) )
2770                 rx_start(info);
2771
2772         spin_unlock_irqrestore(&info->lock,flags);
2773 }
2774
2775 /* Reconfigure adapter based on new parameters
2776  */
2777 static void change_params(SLMP_INFO *info)
2778 {
2779         unsigned cflag;
2780         int bits_per_char;
2781
2782         if (!info->port.tty || !info->port.tty->termios)
2783                 return;
2784
2785         if (debug_level >= DEBUG_LEVEL_INFO)
2786                 printk("%s(%d):%s change_params()\n",
2787                          __FILE__,__LINE__, info->device_name );
2788
2789         cflag = info->port.tty->termios->c_cflag;
2790
2791         /* if B0 rate (hangup) specified then negate DTR and RTS */
2792         /* otherwise assert DTR and RTS */
2793         if (cflag & CBAUD)
2794                 info->serial_signals |= SerialSignal_RTS + SerialSignal_DTR;
2795         else
2796                 info->serial_signals &= ~(SerialSignal_RTS + SerialSignal_DTR);
2797
2798         /* byte size and parity */
2799
2800         switch (cflag & CSIZE) {
2801               case CS5: info->params.data_bits = 5; break;
2802               case CS6: info->params.data_bits = 6; break;
2803               case CS7: info->params.data_bits = 7; break;
2804               case CS8: info->params.data_bits = 8; break;
2805               /* Never happens, but GCC is too dumb to figure it out */
2806               default:  info->params.data_bits = 7; break;
2807               }
2808
2809         if (cflag & CSTOPB)
2810                 info->params.stop_bits = 2;
2811         else
2812                 info->params.stop_bits = 1;
2813
2814         info->params.parity = ASYNC_PARITY_NONE;
2815         if (cflag & PARENB) {
2816                 if (cflag & PARODD)
2817                         info->params.parity = ASYNC_PARITY_ODD;
2818                 else
2819                         info->params.parity = ASYNC_PARITY_EVEN;
2820 #ifdef CMSPAR
2821                 if (cflag & CMSPAR)
2822                         info->params.parity = ASYNC_PARITY_SPACE;
2823 #endif
2824         }
2825
2826         /* calculate number of jiffies to transmit a full
2827          * FIFO (32 bytes) at specified data rate
2828          */
2829         bits_per_char = info->params.data_bits +
2830                         info->params.stop_bits + 1;
2831
2832         /* if port data rate is set to 460800 or less then
2833          * allow tty settings to override, otherwise keep the
2834          * current data rate.
2835          */
2836         if (info->params.data_rate <= 460800) {
2837                 info->params.data_rate = tty_get_baud_rate(info->port.tty);
2838         }
2839
2840         if ( info->params.data_rate ) {
2841                 info->timeout = (32*HZ*bits_per_char) /
2842                                 info->params.data_rate;
2843         }
2844         info->timeout += HZ/50;         /* Add .02 seconds of slop */
2845
2846         if (cflag & CRTSCTS)
2847                 info->port.flags |= ASYNC_CTS_FLOW;
2848         else
2849                 info->port.flags &= ~ASYNC_CTS_FLOW;
2850
2851         if (cflag & CLOCAL)
2852                 info->port.flags &= ~ASYNC_CHECK_CD;
2853         else
2854                 info->port.flags |= ASYNC_CHECK_CD;
2855
2856         /* process tty input control flags */
2857
2858         info->read_status_mask2 = OVRN;
2859         if (I_INPCK(info->port.tty))
2860                 info->read_status_mask2 |= PE | FRME;
2861         if (I_BRKINT(info->port.tty) || I_PARMRK(info->port.tty))
2862                 info->read_status_mask1 |= BRKD;
2863         if (I_IGNPAR(info->port.tty))
2864                 info->ignore_status_mask2 |= PE | FRME;
2865         if (I_IGNBRK(info->port.tty)) {
2866                 info->ignore_status_mask1 |= BRKD;
2867                 /* If ignoring parity and break indicators, ignore
2868                  * overruns too.  (For real raw support).
2869                  */
2870                 if (I_IGNPAR(info->port.tty))
2871                         info->ignore_status_mask2 |= OVRN;
2872         }
2873
2874         program_hw(info);
2875 }
2876
2877 static int get_stats(SLMP_INFO * info, struct mgsl_icount __user *user_icount)
2878 {
2879         int err;
2880
2881         if (debug_level >= DEBUG_LEVEL_INFO)
2882                 printk("%s(%d):%s get_params()\n",
2883                          __FILE__,__LINE__, info->device_name);
2884
2885         if (!user_icount) {
2886                 memset(&info->icount, 0, sizeof(info->icount));
2887         } else {
2888                 COPY_TO_USER(err, user_icount, &info->icount, sizeof(struct mgsl_icount));
2889                 if (err)
2890                         return -EFAULT;
2891         }
2892
2893         return 0;
2894 }
2895
2896 static int get_params(SLMP_INFO * info, MGSL_PARAMS __user *user_params)
2897 {
2898         int err;
2899         if (debug_level >= DEBUG_LEVEL_INFO)
2900                 printk("%s(%d):%s get_params()\n",
2901                          __FILE__,__LINE__, info->device_name);
2902
2903         COPY_TO_USER(err,user_params, &info->params, sizeof(MGSL_PARAMS));
2904         if (err) {
2905                 if ( debug_level >= DEBUG_LEVEL_INFO )
2906                         printk( "%s(%d):%s get_params() user buffer copy failed\n",
2907                                 __FILE__,__LINE__,info->device_name);
2908                 return -EFAULT;
2909         }
2910
2911         return 0;
2912 }
2913
2914 static int set_params(SLMP_INFO * info, MGSL_PARAMS __user *new_params)
2915 {
2916         unsigned long flags;
2917         MGSL_PARAMS tmp_params;
2918         int err;
2919
2920         if (debug_level >= DEBUG_LEVEL_INFO)
2921                 printk("%s(%d):%s set_params\n",
2922                         __FILE__,__LINE__,info->device_name );
2923         COPY_FROM_USER(err,&tmp_params, new_params, sizeof(MGSL_PARAMS));
2924         if (err) {
2925                 if ( debug_level >= DEBUG_LEVEL_INFO )
2926                         printk( "%s(%d):%s set_params() user buffer copy failed\n",
2927                                 __FILE__,__LINE__,info->device_name);
2928                 return -EFAULT;
2929         }
2930
2931         spin_lock_irqsave(&info->lock,flags);
2932         memcpy(&info->params,&tmp_params,sizeof(MGSL_PARAMS));
2933         spin_unlock_irqrestore(&info->lock,flags);
2934
2935         change_params(info);
2936
2937         return 0;
2938 }
2939
2940 static int get_txidle(SLMP_INFO * info, int __user *idle_mode)
2941 {
2942         int err;
2943
2944         if (debug_level >= DEBUG_LEVEL_INFO)
2945                 printk("%s(%d):%s get_txidle()=%d\n",
2946                          __FILE__,__LINE__, info->device_name, info->idle_mode);
2947
2948         COPY_TO_USER(err,idle_mode, &info->idle_mode, sizeof(int));
2949         if (err) {
2950                 if ( debug_level >= DEBUG_LEVEL_INFO )
2951                         printk( "%s(%d):%s get_txidle() user buffer copy failed\n",
2952                                 __FILE__,__LINE__,info->device_name);
2953                 return -EFAULT;
2954         }
2955
2956         return 0;
2957 }
2958
2959 static int set_txidle(SLMP_INFO * info, int idle_mode)
2960 {
2961         unsigned long flags;
2962
2963         if (debug_level >= DEBUG_LEVEL_INFO)
2964                 printk("%s(%d):%s set_txidle(%d)\n",
2965                         __FILE__,__LINE__,info->device_name, idle_mode );
2966
2967         spin_lock_irqsave(&info->lock,flags);
2968         info->idle_mode = idle_mode;
2969         tx_set_idle( info );
2970         spin_unlock_irqrestore(&info->lock,flags);
2971         return 0;
2972 }
2973
2974 static int tx_enable(SLMP_INFO * info, int enable)
2975 {
2976         unsigned long flags;
2977
2978         if (debug_level >= DEBUG_LEVEL_INFO)
2979                 printk("%s(%d):%s tx_enable(%d)\n",
2980                         __FILE__,__LINE__,info->device_name, enable);
2981
2982         spin_lock_irqsave(&info->lock,flags);
2983         if ( enable ) {
2984                 if ( !info->tx_enabled ) {
2985                         tx_start(info);
2986                 }
2987         } else {
2988                 if ( info->tx_enabled )
2989                         tx_stop(info);
2990         }
2991         spin_unlock_irqrestore(&info->lock,flags);
2992         return 0;
2993 }
2994
2995 /* abort send HDLC frame
2996  */
2997 static int tx_abort(SLMP_INFO * info)
2998 {
2999         unsigned long flags;
3000
3001         if (debug_level >= DEBUG_LEVEL_INFO)
3002                 printk("%s(%d):%s tx_abort()\n",
3003                         __FILE__,__LINE__,info->device_name);
3004
3005         spin_lock_irqsave(&info->lock,flags);
3006         if ( info->tx_active && info->params.mode == MGSL_MODE_HDLC ) {
3007                 info->ie1_value &= ~UDRN;
3008                 info->ie1_value |= IDLE;
3009                 write_reg(info, IE1, info->ie1_value);  /* disable tx status interrupts */
3010                 write_reg(info, SR1, (unsigned char)(IDLE + UDRN));     /* clear pending */
3011
3012                 write_reg(info, TXDMA + DSR, 0);                /* disable DMA channel */
3013                 write_reg(info, TXDMA + DCMD, SWABORT); /* reset/init DMA channel */
3014
3015                 write_reg(info, CMD, TXABORT);
3016         }
3017         spin_unlock_irqrestore(&info->lock,flags);
3018         return 0;
3019 }
3020
3021 static int rx_enable(SLMP_INFO * info, int enable)
3022 {
3023         unsigned long flags;
3024
3025         if (debug_level >= DEBUG_LEVEL_INFO)
3026                 printk("%s(%d):%s rx_enable(%d)\n",
3027                         __FILE__,__LINE__,info->device_name,enable);
3028
3029         spin_lock_irqsave(&info->lock,flags);
3030         if ( enable ) {
3031                 if ( !info->rx_enabled )
3032                         rx_start(info);
3033         } else {
3034                 if ( info->rx_enabled )
3035                         rx_stop(info);
3036         }
3037         spin_unlock_irqrestore(&info->lock,flags);
3038         return 0;
3039 }
3040
3041 /* wait for specified event to occur
3042  */
3043 static int wait_mgsl_event(SLMP_INFO * info, int __user *mask_ptr)
3044 {
3045         unsigned long flags;
3046         int s;
3047         int rc=0;
3048         struct mgsl_icount cprev, cnow;
3049         int events;
3050         int mask;
3051         struct  _input_signal_events oldsigs, newsigs;
3052         DECLARE_WAITQUEUE(wait, current);
3053
3054         COPY_FROM_USER(rc,&mask, mask_ptr, sizeof(int));
3055         if (rc) {
3056                 return  -EFAULT;
3057         }
3058
3059         if (debug_level >= DEBUG_LEVEL_INFO)
3060                 printk("%s(%d):%s wait_mgsl_event(%d)\n",
3061                         __FILE__,__LINE__,info->device_name,mask);
3062
3063         spin_lock_irqsave(&info->lock,flags);
3064
3065         /* return immediately if state matches requested events */
3066         get_signals(info);
3067         s = info->serial_signals;
3068
3069         events = mask &
3070                 ( ((s & SerialSignal_DSR) ? MgslEvent_DsrActive:MgslEvent_DsrInactive) +
3071                   ((s & SerialSignal_DCD) ? MgslEvent_DcdActive:MgslEvent_DcdInactive) +
3072                   ((s & SerialSignal_CTS) ? MgslEvent_CtsActive:MgslEvent_CtsInactive) +
3073                   ((s & SerialSignal_RI)  ? MgslEvent_RiActive :MgslEvent_RiInactive) );
3074         if (events) {
3075                 spin_unlock_irqrestore(&info->lock,flags);
3076                 goto exit;
3077         }
3078
3079         /* save current irq counts */
3080         cprev = info->icount;
3081         oldsigs = info->input_signal_events;
3082
3083         /* enable hunt and idle irqs if needed */
3084         if (mask & (MgslEvent_ExitHuntMode+MgslEvent_IdleReceived)) {
3085                 unsigned char oldval = info->ie1_value;
3086                 unsigned char newval = oldval +
3087                          (mask & MgslEvent_ExitHuntMode ? FLGD:0) +
3088                          (mask & MgslEvent_IdleReceived ? IDLD:0);
3089                 if ( oldval != newval ) {
3090                         info->ie1_value = newval;
3091                         write_reg(info, IE1, info->ie1_value);
3092                 }
3093         }
3094
3095         set_current_state(TASK_INTERRUPTIBLE);
3096         add_wait_queue(&info->event_wait_q, &wait);
3097
3098         spin_unlock_irqrestore(&info->lock,flags);
3099
3100         for(;;) {
3101                 schedule();
3102                 if (signal_pending(current)) {
3103                         rc = -ERESTARTSYS;
3104                         break;
3105                 }
3106
3107                 /* get current irq counts */
3108                 spin_lock_irqsave(&info->lock,flags);
3109                 cnow = info->icount;
3110                 newsigs = info->input_signal_events;
3111                 set_current_state(TASK_INTERRUPTIBLE);
3112                 spin_unlock_irqrestore(&info->lock,flags);
3113
3114                 /* if no change, wait aborted for some reason */
3115                 if (newsigs.dsr_up   == oldsigs.dsr_up   &&
3116                     newsigs.dsr_down == oldsigs.dsr_down &&
3117                     newsigs.dcd_up   == oldsigs.dcd_up   &&
3118                     newsigs.dcd_down == oldsigs.dcd_down &&
3119                     newsigs.cts_up   == oldsigs.cts_up   &&
3120                     newsigs.cts_down == oldsigs.cts_down &&
3121                     newsigs.ri_up    == oldsigs.ri_up    &&
3122                     newsigs.ri_down  == oldsigs.ri_down  &&
3123                     cnow.exithunt    == cprev.exithunt   &&
3124                     cnow.rxidle      == cprev.rxidle) {
3125                         rc = -EIO;
3126                         break;
3127                 }
3128
3129                 events = mask &
3130                         ( (newsigs.dsr_up   != oldsigs.dsr_up   ? MgslEvent_DsrActive:0)   +
3131                           (newsigs.dsr_down != oldsigs.dsr_down ? MgslEvent_DsrInactive:0) +
3132                           (newsigs.dcd_up   != oldsigs.dcd_up   ? MgslEvent_DcdActive:0)   +
3133                           (newsigs.dcd_down != oldsigs.dcd_down ? MgslEvent_DcdInactive:0) +
3134                           (newsigs.cts_up   != oldsigs.cts_up   ? MgslEvent_CtsActive:0)   +
3135                           (newsigs.cts_down != oldsigs.cts_down ? MgslEvent_CtsInactive:0) +
3136                           (newsigs.ri_up    != oldsigs.ri_up    ? MgslEvent_RiActive:0)    +
3137                           (newsigs.ri_down  != oldsigs.ri_down  ? MgslEvent_RiInactive:0)  +
3138                           (cnow.exithunt    != cprev.exithunt   ? MgslEvent_ExitHuntMode:0) +
3139                           (cnow.rxidle      != cprev.rxidle     ? MgslEvent_IdleReceived:0) );
3140                 if (events)
3141                         break;
3142
3143                 cprev = cnow;
3144                 oldsigs = newsigs;
3145         }
3146
3147         remove_wait_queue(&info->event_wait_q, &wait);
3148         set_current_state(TASK_RUNNING);
3149
3150
3151         if (mask & (MgslEvent_ExitHuntMode + MgslEvent_IdleReceived)) {
3152                 spin_lock_irqsave(&info->lock,flags);
3153                 if (!waitqueue_active(&info->event_wait_q)) {
3154                         /* disable enable exit hunt mode/idle rcvd IRQs */
3155                         info->ie1_value &= ~(FLGD|IDLD);
3156                         write_reg(info, IE1, info->ie1_value);
3157                 }
3158                 spin_unlock_irqrestore(&info->lock,flags);
3159         }
3160 exit:
3161         if ( rc == 0 )
3162                 PUT_USER(rc, events, mask_ptr);
3163
3164         return rc;
3165 }
3166
3167 static int modem_input_wait(SLMP_INFO *info,int arg)
3168 {
3169         unsigned long flags;
3170         int rc;
3171         struct mgsl_icount cprev, cnow;
3172         DECLARE_WAITQUEUE(wait, current);
3173
3174         /* save current irq counts */
3175         spin_lock_irqsave(&info->lock,flags);
3176         cprev = info->icount;
3177         add_wait_queue(&info->status_event_wait_q, &wait);
3178         set_current_state(TASK_INTERRUPTIBLE);
3179         spin_unlock_irqrestore(&info->lock,flags);
3180
3181         for(;;) {
3182                 schedule();
3183                 if (signal_pending(current)) {
3184                         rc = -ERESTARTSYS;
3185                         break;
3186                 }
3187
3188                 /* get new irq counts */
3189                 spin_lock_irqsave(&info->lock,flags);
3190                 cnow = info->icount;
3191                 set_current_state(TASK_INTERRUPTIBLE);
3192                 spin_unlock_irqrestore(&info->lock,flags);
3193
3194                 /* if no change, wait aborted for some reason */
3195                 if (cnow.rng == cprev.rng && cnow.dsr == cprev.dsr &&
3196                     cnow.dcd == cprev.dcd && cnow.cts == cprev.cts) {
3197                         rc = -EIO;
3198                         break;
3199                 }
3200
3201                 /* check for change in caller specified modem input */
3202                 if ((arg & TIOCM_RNG && cnow.rng != cprev.rng) ||
3203                     (arg & TIOCM_DSR && cnow.dsr != cprev.dsr) ||
3204                     (arg & TIOCM_CD  && cnow.dcd != cprev.dcd) ||
3205                     (arg & TIOCM_CTS && cnow.cts != cprev.cts)) {
3206                         rc = 0;
3207                         break;
3208                 }
3209
3210                 cprev = cnow;
3211         }
3212         remove_wait_queue(&info->status_event_wait_q, &wait);
3213         set_current_state(TASK_RUNNING);
3214         return rc;
3215 }
3216
3217 /* return the state of the serial control and status signals
3218  */
3219 static int tiocmget(struct tty_struct *tty, struct file *file)
3220 {
3221         SLMP_INFO *info = tty->driver_data;
3222         unsigned int result;
3223         unsigned long flags;
3224
3225         spin_lock_irqsave(&info->lock,flags);
3226         get_signals(info);
3227         spin_unlock_irqrestore(&info->lock,flags);
3228
3229         result = ((info->serial_signals & SerialSignal_RTS) ? TIOCM_RTS:0) +
3230                 ((info->serial_signals & SerialSignal_DTR) ? TIOCM_DTR:0) +
3231                 ((info->serial_signals & SerialSignal_DCD) ? TIOCM_CAR:0) +
3232                 ((info->serial_signals & SerialSignal_RI)  ? TIOCM_RNG:0) +
3233                 ((info->serial_signals & SerialSignal_DSR) ? TIOCM_DSR:0) +
3234                 ((info->serial_signals & SerialSignal_CTS) ? TIOCM_CTS:0);
3235
3236         if (debug_level >= DEBUG_LEVEL_INFO)
3237                 printk("%s(%d):%s tiocmget() value=%08X\n",
3238                          __FILE__,__LINE__, info->device_name, result );
3239         return result;
3240 }
3241
3242 /* set modem control signals (DTR/RTS)
3243  */
3244 static int tiocmset(struct tty_struct *tty, struct file *file,
3245                     unsigned int set, unsigned int clear)
3246 {
3247         SLMP_INFO *info = tty->driver_data;
3248         unsigned long flags;
3249
3250         if (debug_level >= DEBUG_LEVEL_INFO)
3251                 printk("%s(%d):%s tiocmset(%x,%x)\n",
3252                         __FILE__,__LINE__,info->device_name, set, clear);
3253
3254         if (set & TIOCM_RTS)
3255                 info->serial_signals |= SerialSignal_RTS;
3256         if (set & TIOCM_DTR)
3257                 info->serial_signals |= SerialSignal_DTR;
3258         if (clear & TIOCM_RTS)
3259                 info->serial_signals &= ~SerialSignal_RTS;
3260         if (clear & TIOCM_DTR)
3261                 info->serial_signals &= ~SerialSignal_DTR;
3262
3263         spin_lock_irqsave(&info->lock,flags);
3264         set_signals(info);
3265         spin_unlock_irqrestore(&info->lock,flags);
3266
3267         return 0;
3268 }
3269
3270 static int carrier_raised(struct tty_port *port)
3271 {
3272         SLMP_INFO *info = container_of(port, SLMP_INFO, port);
3273         unsigned long flags;
3274
3275         spin_lock_irqsave(&info->lock,flags);
3276         get_signals(info);
3277         spin_unlock_irqrestore(&info->lock,flags);
3278
3279         return (info->serial_signals & SerialSignal_DCD) ? 1 : 0;
3280 }
3281
3282 static void raise_dtr_rts(struct tty_port *port)
3283 {
3284         SLMP_INFO *info = container_of(port, SLMP_INFO, port);
3285         unsigned long flags;
3286
3287         spin_lock_irqsave(&info->lock,flags);
3288         info->serial_signals |= SerialSignal_RTS + SerialSignal_DTR;
3289         set_signals(info);
3290         spin_unlock_irqrestore(&info->lock,flags);
3291 }
3292
3293 /* Block the current process until the specified port is ready to open.
3294  */
3295 static int block_til_ready(struct tty_struct *tty, struct file *filp,
3296                            SLMP_INFO *info)
3297 {
3298         DECLARE_WAITQUEUE(wait, current);
3299         int             retval;
3300         bool            do_clocal = false;
3301         bool            extra_count = false;
3302         unsigned long   flags;
3303         int             cd;
3304         struct tty_port *port = &info->port;
3305
3306         if (debug_level >= DEBUG_LEVEL_INFO)
3307                 printk("%s(%d):%s block_til_ready()\n",
3308                          __FILE__,__LINE__, tty->driver->name );
3309
3310         if (filp->f_flags & O_NONBLOCK || tty->flags & (1 << TTY_IO_ERROR)){
3311                 /* nonblock mode is set or port is not enabled */
3312                 /* just verify that callout device is not active */
3313                 port->flags |= ASYNC_NORMAL_ACTIVE;
3314                 return 0;
3315         }
3316
3317         if (tty->termios->c_cflag & CLOCAL)
3318                 do_clocal = true;
3319
3320         /* Wait for carrier detect and the line to become
3321          * free (i.e., not in use by the callout).  While we are in
3322          * this loop, port->count is dropped by one, so that
3323          * close() knows when to free things.  We restore it upon
3324          * exit, either normal or abnormal.
3325          */
3326
3327         retval = 0;
3328         add_wait_queue(&port->open_wait, &wait);
3329
3330         if (debug_level >= DEBUG_LEVEL_INFO)
3331                 printk("%s(%d):%s block_til_ready() before block, count=%d\n",
3332                          __FILE__,__LINE__, tty->driver->name, port->count );
3333
3334         spin_lock_irqsave(&info->lock, flags);
3335         if (!tty_hung_up_p(filp)) {
3336                 extra_count = true;
3337                 port->count--;
3338         }
3339         spin_unlock_irqrestore(&info->lock, flags);
3340         port->blocked_open++;
3341
3342         while (1) {
3343                 if (tty->termios->c_cflag & CBAUD)
3344                         tty_port_raise_dtr_rts(port);
3345
3346                 set_current_state(TASK_INTERRUPTIBLE);
3347
3348                 if (tty_hung_up_p(filp) || !(port->flags & ASYNC_INITIALIZED)){
3349                         retval = (port->flags & ASYNC_HUP_NOTIFY) ?
3350                                         -EAGAIN : -ERESTARTSYS;
3351                         break;
3352                 }
3353
3354                 cd = tty_port_carrier_raised(port);
3355
3356                 if (!(port->flags & ASYNC_CLOSING) && (do_clocal || cd))
3357                         break;
3358
3359                 if (signal_pending(current)) {
3360                         retval = -ERESTARTSYS;
3361                         break;
3362                 }
3363
3364                 if (debug_level >= DEBUG_LEVEL_INFO)
3365                         printk("%s(%d):%s block_til_ready() count=%d\n",
3366                                  __FILE__,__LINE__, tty->driver->name, port->count );
3367
3368                 schedule();
3369         }
3370
3371         set_current_state(TASK_RUNNING);
3372         remove_wait_queue(&port->open_wait, &wait);
3373
3374         if (extra_count)
3375                 port->count++;
3376         port->blocked_open--;
3377
3378         if (debug_level >= DEBUG_LEVEL_INFO)
3379                 printk("%s(%d):%s block_til_ready() after, count=%d\n",
3380                          __FILE__,__LINE__, tty->driver->name, port->count );
3381
3382         if (!retval)
3383                 port->flags |= ASYNC_NORMAL_ACTIVE;
3384
3385         return retval;
3386 }
3387
3388 static int alloc_dma_bufs(SLMP_INFO *info)
3389 {
3390         unsigned short BuffersPerFrame;
3391         unsigned short BufferCount;
3392
3393         // Force allocation to start at 64K boundary for each port.
3394         // This is necessary because *all* buffer descriptors for a port
3395         // *must* be in the same 64K block. All descriptors on a port
3396         // share a common 'base' address (upper 8 bits of 24 bits) programmed
3397         // into the CBP register.
3398         info->port_array[0]->last_mem_alloc = (SCA_MEM_SIZE/4) * info->port_num;
3399
3400         /* Calculate the number of DMA buffers necessary to hold the */
3401         /* largest allowable frame size. Note: If the max frame size is */
3402         /* not an even multiple of the DMA buffer size then we need to */
3403         /* round the buffer count per frame up one. */
3404
3405         BuffersPerFrame = (unsigned short)(info->max_frame_size/SCABUFSIZE);
3406         if ( info->max_frame_size % SCABUFSIZE )
3407                 BuffersPerFrame++;
3408
3409         /* calculate total number of data buffers (SCABUFSIZE) possible
3410          * in one ports memory (SCA_MEM_SIZE/4) after allocating memory
3411          * for the descriptor list (BUFFERLISTSIZE).
3412          */
3413         BufferCount = (SCA_MEM_SIZE/4 - BUFFERLISTSIZE)/SCABUFSIZE;
3414
3415         /* limit number of buffers to maximum amount of descriptors */
3416         if (BufferCount > BUFFERLISTSIZE/sizeof(SCADESC))
3417                 BufferCount = BUFFERLISTSIZE/sizeof(SCADESC);
3418
3419         /* use enough buffers to transmit one max size frame */
3420         info->tx_buf_count = BuffersPerFrame + 1;
3421
3422         /* never use more than half the available buffers for transmit */
3423         if (info->tx_buf_count > (BufferCount/2))
3424                 info->tx_buf_count = BufferCount/2;
3425
3426         if (info->tx_buf_count > SCAMAXDESC)
3427                 info->tx_buf_count = SCAMAXDESC;
3428
3429         /* use remaining buffers for receive */
3430         info->rx_buf_count = BufferCount - info->tx_buf_count;
3431
3432         if (info->rx_buf_count > SCAMAXDESC)
3433                 info->rx_buf_count = SCAMAXDESC;
3434
3435         if ( debug_level >= DEBUG_LEVEL_INFO )
3436                 printk("%s(%d):%s Allocating %d TX and %d RX DMA buffers.\n",
3437                         __FILE__,__LINE__, info->device_name,
3438                         info->tx_buf_count,info->rx_buf_count);
3439
3440         if ( alloc_buf_list( info ) < 0 ||
3441                 alloc_frame_bufs(info,
3442                                         info->rx_buf_list,
3443                                         info->rx_buf_list_ex,
3444                                         info->rx_buf_count) < 0 ||
3445                 alloc_frame_bufs(info,
3446                                         info->tx_buf_list,
3447                                         info->tx_buf_list_ex,
3448                                         info->tx_buf_count) < 0 ||
3449                 alloc_tmp_rx_buf(info) < 0 ) {
3450                 printk("%s(%d):%s Can't allocate DMA buffer memory\n",
3451                         __FILE__,__LINE__, info->device_name);
3452                 return -ENOMEM;
3453         }
3454
3455         rx_reset_buffers( info );
3456
3457         return 0;
3458 }
3459
3460 /* Allocate DMA buffers for the transmit and receive descriptor lists.
3461  */
3462 static int alloc_buf_list(SLMP_INFO *info)
3463 {
3464         unsigned int i;
3465
3466         /* build list in adapter shared memory */
3467         info->buffer_list = info->memory_base + info->port_array[0]->last_mem_alloc;
3468         info->buffer_list_phys = info->port_array[0]->last_mem_alloc;
3469         info->port_array[0]->last_mem_alloc += BUFFERLISTSIZE;
3470
3471         memset(info->buffer_list, 0, BUFFERLISTSIZE);
3472
3473         /* Save virtual address pointers to the receive and */
3474         /* transmit buffer lists. (Receive 1st). These pointers will */
3475         /* be used by the processor to access the lists. */
3476         info->rx_buf_list = (SCADESC *)info->buffer_list;
3477
3478         info->tx_buf_list = (SCADESC *)info->buffer_list;
3479         info->tx_buf_list += info->rx_buf_count;
3480
3481         /* Build links for circular buffer entry lists (tx and rx)
3482          *
3483          * Note: links are physical addresses read by the SCA device
3484          * to determine the next buffer entry to use.
3485          */
3486
3487         for ( i = 0; i < info->rx_buf_count; i++ ) {
3488                 /* calculate and store physical address of this buffer entry */
3489                 info->rx_buf_list_ex[i].phys_entry =
3490                         info->buffer_list_phys + (i * sizeof(SCABUFSIZE));
3491
3492                 /* calculate and store physical address of */
3493                 /* next entry in cirular list of entries */
3494                 info->rx_buf_list[i].next = info->buffer_list_phys;
3495                 if ( i < info->rx_buf_count - 1 )
3496                         info->rx_buf_list[i].next += (i + 1) * sizeof(SCADESC);
3497
3498                 info->rx_buf_list[i].length = SCABUFSIZE;
3499         }
3500
3501         for ( i = 0; i < info->tx_buf_count; i++ ) {
3502                 /* calculate and store physical address of this buffer entry */
3503                 info->tx_buf_list_ex[i].phys_entry = info->buffer_list_phys +
3504                         ((info->rx_buf_count + i) * sizeof(SCADESC));
3505
3506                 /* calculate and store physical address of */
3507                 /* next entry in cirular list of entries */
3508
3509                 info->tx_buf_list[i].next = info->buffer_list_phys +
3510                         info->rx_buf_count * sizeof(SCADESC);
3511
3512                 if ( i < info->tx_buf_count - 1 )
3513                         info->tx_buf_list[i].next += (i + 1) * sizeof(SCADESC);
3514         }
3515
3516         return 0;
3517 }
3518
3519 /* Allocate the frame DMA buffers used by the specified buffer list.
3520  */
3521 static int alloc_frame_bufs(SLMP_INFO *info, SCADESC *buf_list,SCADESC_EX *buf_list_ex,int count)
3522 {
3523         int i;
3524         unsigned long phys_addr;
3525
3526         for ( i = 0; i < count; i++ ) {
3527                 buf_list_ex[i].virt_addr = info->memory_base + info->port_array[0]->last_mem_alloc;
3528                 phys_addr = info->port_array[0]->last_mem_alloc;
3529                 info->port_array[0]->last_mem_alloc += SCABUFSIZE;
3530
3531                 buf_list[i].buf_ptr  = (unsigned short)phys_addr;
3532                 buf_list[i].buf_base = (unsigned char)(phys_addr >> 16);
3533         }
3534
3535         return 0;
3536 }
3537
3538 static void free_dma_bufs(SLMP_INFO *info)
3539 {
3540         info->buffer_list = NULL;
3541         info->rx_buf_list = NULL;
3542         info->tx_buf_list = NULL;
3543 }
3544
3545 /* allocate buffer large enough to hold max_frame_size.
3546  * This buffer is used to pass an assembled frame to the line discipline.
3547  */
3548 static int alloc_tmp_rx_buf(SLMP_INFO *info)
3549 {
3550         info->tmp_rx_buf = kmalloc(info->max_frame_size, GFP_KERNEL);
3551         if (info->tmp_rx_buf == NULL)
3552                 return -ENOMEM;
3553         return 0;
3554 }
3555
3556 static void free_tmp_rx_buf(SLMP_INFO *info)
3557 {
3558         kfree(info->tmp_rx_buf);
3559         info->tmp_rx_buf = NULL;
3560 }
3561
3562 static int claim_resources(SLMP_INFO *info)
3563 {
3564         if (request_mem_region(info->phys_memory_base,SCA_MEM_SIZE,"synclinkmp") == NULL) {
3565                 printk( "%s(%d):%s mem addr conflict, Addr=%08X\n",
3566                         __FILE__,__LINE__,info->device_name, info->phys_memory_base);
3567                 info->init_error = DiagStatus_AddressConflict;
3568                 goto errout;
3569         }
3570         else
3571                 info->shared_mem_requested = true;
3572
3573         if (request_mem_region(info->phys_lcr_base + info->lcr_offset,128,"synclinkmp") == NULL) {
3574                 printk( "%s(%d):%s lcr mem addr conflict, Addr=%08X\n",
3575                         __FILE__,__LINE__,info->device_name, info->phys_lcr_base);
3576                 info->init_error = DiagStatus_AddressConflict;
3577                 goto errout;
3578         }
3579         else
3580                 info->lcr_mem_requested = true;
3581
3582         if (request_mem_region(info->phys_sca_base + info->sca_offset,SCA_BASE_SIZE,"synclinkmp") == NULL) {
3583                 printk( "%s(%d):%s sca mem addr conflict, Addr=%08X\n",
3584                         __FILE__,__LINE__,info->device_name, info->phys_sca_base);
3585                 info->init_error = DiagStatus_AddressConflict;
3586                 goto errout;
3587         }
3588         else
3589                 info->sca_base_requested = true;
3590
3591         if (request_mem_region(info->phys_statctrl_base + info->statctrl_offset,SCA_REG_SIZE,"synclinkmp") == NULL) {
3592                 printk( "%s(%d):%s stat/ctrl mem addr conflict, Addr=%08X\n",
3593                         __FILE__,__LINE__,info->device_name, info->phys_statctrl_base);
3594                 info->init_error = DiagStatus_AddressConflict;
3595                 goto errout;
3596         }
3597         else
3598                 info->sca_statctrl_requested = true;
3599
3600         info->memory_base = ioremap_nocache(info->phys_memory_base,
3601                                                                 SCA_MEM_SIZE);
3602         if (!info->memory_base) {
3603                 printk( "%s(%d):%s Cant map shared memory, MemAddr=%08X\n",
3604                         __FILE__,__LINE__,info->device_name, info->phys_memory_base );
3605                 info->init_error = DiagStatus_CantAssignPciResources;
3606                 goto errout;
3607         }
3608
3609         info->lcr_base = ioremap_nocache(info->phys_lcr_base, PAGE_SIZE);
3610         if (!info->lcr_base) {
3611                 printk( "%s(%d):%s Cant map LCR memory, MemAddr=%08X\n",
3612                         __FILE__,__LINE__,info->device_name, info->phys_lcr_base );
3613                 info->init_error = DiagStatus_CantAssignPciResources;
3614                 goto errout;
3615         }
3616         info->lcr_base += info->lcr_offset;
3617
3618         info->sca_base = ioremap_nocache(info->phys_sca_base, PAGE_SIZE);
3619         if (!info->sca_base) {
3620                 printk( "%s(%d):%s Cant map SCA memory, MemAddr=%08X\n",
3621                         __FILE__,__LINE__,info->device_name, info->phys_sca_base );
3622                 info->init_error = DiagStatus_CantAssignPciResources;
3623                 goto errout;
3624         }
3625         info->sca_base += info->sca_offset;
3626
3627         info->statctrl_base = ioremap_nocache(info->phys_statctrl_base,
3628                                                                 PAGE_SIZE);
3629         if (!info->statctrl_base) {
3630                 printk( "%s(%d):%s Cant map SCA Status/Control memory, MemAddr=%08X\n",
3631                         __FILE__,__LINE__,info->device_name, info->phys_statctrl_base );
3632                 info->init_error = DiagStatus_CantAssignPciResources;
3633                 goto errout;
3634         }
3635         info->statctrl_base += info->statctrl_offset;
3636
3637         if ( !memory_test(info) ) {
3638                 printk( "%s(%d):Shared Memory Test failed for device %s MemAddr=%08X\n",
3639                         __FILE__,__LINE__,info->device_name, info->phys_memory_base );
3640                 info->init_error = DiagStatus_MemoryError;
3641                 goto errout;
3642         }
3643
3644         return 0;
3645
3646 errout:
3647         release_resources( info );
3648         return -ENODEV;
3649 }
3650
3651 static void release_resources(SLMP_INFO *info)
3652 {
3653         if ( debug_level >= DEBUG_LEVEL_INFO )
3654                 printk( "%s(%d):%s release_resources() entry\n",
3655                         __FILE__,__LINE__,info->device_name );
3656
3657         if ( info->irq_requested ) {
3658                 free_irq(info->irq_level, info);
3659                 info->irq_requested = false;
3660         }
3661
3662         if ( info->shared_mem_requested ) {
3663                 release_mem_region(info->phys_memory_base,SCA_MEM_SIZE);
3664                 info->shared_mem_requested = false;
3665         }
3666         if ( info->lcr_mem_requested ) {
3667                 release_mem_region(info->phys_lcr_base + info->lcr_offset,128);
3668                 info->lcr_mem_requested = false;
3669         }
3670         if ( info->sca_base_requested ) {
3671                 release_mem_region(info->phys_sca_base + info->sca_offset,SCA_BASE_SIZE);
3672                 info->sca_base_requested = false;
3673         }
3674         if ( info->sca_statctrl_requested ) {
3675                 release_mem_region(info->phys_statctrl_base + info->statctrl_offset,SCA_REG_SIZE);
3676                 info->sca_statctrl_requested = false;
3677         }
3678
3679         if (info->memory_base){
3680                 iounmap(info->memory_base);
3681                 info->memory_base = NULL;
3682         }
3683
3684         if (info->sca_base) {
3685                 iounmap(info->sca_base - info->sca_offset);
3686                 info->sca_base=NULL;
3687         }
3688
3689         if (info->statctrl_base) {
3690                 iounmap(info->statctrl_base - info->statctrl_offset);
3691                 info->statctrl_base=NULL;
3692         }
3693
3694         if (info->lcr_base){
3695                 iounmap(info->lcr_base - info->lcr_offset);
3696                 info->lcr_base = NULL;
3697         }
3698
3699         if ( debug_level >= DEBUG_LEVEL_INFO )
3700                 printk( "%s(%d):%s release_resources() exit\n",
3701                         __FILE__,__LINE__,info->device_name );
3702 }
3703
3704 /* Add the specified device instance data structure to the
3705  * global linked list of devices and increment the device count.
3706  */
3707 static void add_device(SLMP_INFO *info)
3708 {
3709         info->next_device = NULL;
3710         info->line = synclinkmp_device_count;
3711         sprintf(info->device_name,"ttySLM%dp%d",info->adapter_num,info->port_num);
3712
3713         if (info->line < MAX_DEVICES) {
3714                 if (maxframe[info->line])
3715                         info->max_frame_size = maxframe[info->line];
3716         }
3717
3718         synclinkmp_device_count++;
3719
3720         if ( !synclinkmp_device_list )
3721                 synclinkmp_device_list = info;
3722         else {
3723                 SLMP_INFO *current_dev = synclinkmp_device_list;
3724                 while( current_dev->next_device )
3725                         current_dev = current_dev->next_device;
3726                 current_dev->next_device = info;
3727         }
3728
3729         if ( info->max_frame_size < 4096 )
3730                 info->max_frame_size = 4096;
3731         else if ( info->max_frame_size > 65535 )
3732                 info->max_frame_size = 65535;
3733
3734         printk( "SyncLink MultiPort %s: "
3735                 "Mem=(%08x %08X %08x %08X) IRQ=%d MaxFrameSize=%u\n",
3736                 info->device_name,
3737                 info->phys_sca_base,
3738                 info->phys_memory_base,
3739                 info->phys_statctrl_base,
3740                 info->phys_lcr_base,
3741                 info->irq_level,
3742                 info->max_frame_size );
3743
3744 #if SYNCLINK_GENERIC_HDLC
3745         hdlcdev_init(info);
3746 #endif
3747 }
3748
3749 static const struct tty_port_operations port_ops = {
3750         .carrier_raised = carrier_raised,
3751         .raise_dtr_rts = raise_dtr_rts,
3752 };
3753
3754 /* Allocate and initialize a device instance structure
3755  *
3756  * Return Value:        pointer to SLMP_INFO if success, otherwise NULL
3757  */
3758 static SLMP_INFO *alloc_dev(int adapter_num, int port_num, struct pci_dev *pdev)
3759 {
3760         SLMP_INFO *info;
3761
3762         info = kzalloc(sizeof(SLMP_INFO),
3763                  GFP_KERNEL);
3764
3765         if (!info) {
3766                 printk("%s(%d) Error can't allocate device instance data for adapter %d, port %d\n",
3767                         __FILE__,__LINE__, adapter_num, port_num);
3768         } else {
3769                 tty_port_init(&info->port);
3770                 info->port.ops = &port_ops;
3771                 info->magic = MGSL_MAGIC;
3772                 INIT_WORK(&info->task, bh_handler);
3773                 info->max_frame_size = 4096;
3774                 info->port.close_delay = 5*HZ/10;
3775                 info->port.closing_wait = 30*HZ;
3776                 init_waitqueue_head(&info->status_event_wait_q);
3777                 init_waitqueue_head(&info->event_wait_q);
3778                 spin_lock_init(&info->netlock);
3779                 memcpy(&info->params,&default_params,sizeof(MGSL_PARAMS));
3780                 info->idle_mode = HDLC_TXIDLE_FLAGS;
3781                 info->adapter_num = adapter_num;
3782                 info->port_num = port_num;
3783
3784                 /* Copy configuration info to device instance data */
3785                 info->irq_level = pdev->irq;
3786                 info->phys_lcr_base = pci_resource_start(pdev,0);
3787                 info->phys_sca_base = pci_resource_start(pdev,2);
3788                 info->phys_memory_base = pci_resource_start(pdev,3);
3789                 info->phys_statctrl_base = pci_resource_start(pdev,4);
3790
3791                 /* Because veremap only works on page boundaries we must map
3792                  * a larger area than is actually implemented for the LCR
3793                  * memory range. We map a full page starting at the page boundary.
3794                  */
3795                 info->lcr_offset    = info->phys_lcr_base & (PAGE_SIZE-1);
3796                 info->phys_lcr_base &= ~(PAGE_SIZE-1);
3797
3798                 info->sca_offset    = info->phys_sca_base & (PAGE_SIZE-1);
3799                 info->phys_sca_base &= ~(PAGE_SIZE-1);
3800
3801                 info->statctrl_offset    = info->phys_statctrl_base & (PAGE_SIZE-1);
3802                 info->phys_statctrl_base &= ~(PAGE_SIZE-1);
3803
3804                 info->bus_type = MGSL_BUS_TYPE_PCI;
3805                 info->irq_flags = IRQF_SHARED;
3806
3807                 setup_timer(&info->tx_timer, tx_timeout, (unsigned long)info);
3808                 setup_timer(&info->status_timer, status_timeout,
3809                                 (unsigned long)info);
3810
3811                 /* Store the PCI9050 misc control register value because a flaw
3812                  * in the PCI9050 prevents LCR registers from being read if
3813                  * BIOS assigns an LCR base address with bit 7 set.
3814                  *
3815                  * Only the misc control register is accessed for which only
3816                  * write access is needed, so set an initial value and change
3817                  * bits to the device instance data as we write the value
3818                  * to the actual misc control register.
3819                  */
3820                 info->misc_ctrl_value = 0x087e4546;
3821
3822                 /* initial port state is unknown - if startup errors
3823                  * occur, init_error will be set to indicate the
3824                  * problem. Once the port is fully initialized,
3825                  * this value will be set to 0 to indicate the
3826                  * port is available.
3827                  */
3828                 info->init_error = -1;
3829         }
3830
3831         return info;
3832 }
3833
3834 static void device_init(int adapter_num, struct pci_dev *pdev)
3835 {
3836         SLMP_INFO *port_array[SCA_MAX_PORTS];
3837         int port;
3838
3839         /* allocate device instances for up to SCA_MAX_PORTS devices */
3840         for ( port = 0; port < SCA_MAX_PORTS; ++port ) {
3841                 port_array[port] = alloc_dev(adapter_num,port,pdev);
3842                 if( port_array[port] == NULL ) {
3843                         for ( --port; port >= 0; --port )
3844                                 kfree(port_array[port]);
3845                         return;
3846                 }
3847         }
3848
3849         /* give copy of port_array to all ports and add to device list  */
3850         for ( port = 0; port < SCA_MAX_PORTS; ++port ) {
3851                 memcpy(port_array[port]->port_array,port_array,sizeof(port_array));
3852                 add_device( port_array[port] );
3853                 spin_lock_init(&port_array[port]->lock);
3854         }
3855
3856         /* Allocate and claim adapter resources */
3857         if ( !claim_resources(port_array[0]) ) {
3858
3859                 alloc_dma_bufs(port_array[0]);
3860
3861                 /* copy resource information from first port to others */
3862                 for ( port = 1; port < SCA_MAX_PORTS; ++port ) {
3863                         port_array[port]->lock  = port_array[0]->lock;
3864                         port_array[port]->irq_level     = port_array[0]->irq_level;
3865                         port_array[port]->memory_base   = port_array[0]->memory_base;
3866                         port_array[port]->sca_base      = port_array[0]->sca_base;
3867                         port_array[port]->statctrl_base = port_array[0]->statctrl_base;
3868                         port_array[port]->lcr_base      = port_array[0]->lcr_base;
3869                         alloc_dma_bufs(port_array[port]);
3870                 }
3871
3872                 if ( request_irq(port_array[0]->irq_level,
3873                                         synclinkmp_interrupt,
3874                                         port_array[0]->irq_flags,
3875                                         port_array[0]->device_name,
3876                                         port_array[0]) < 0 ) {
3877                         printk( "%s(%d):%s Cant request interrupt, IRQ=%d\n",
3878                                 __FILE__,__LINE__,
3879                                 port_array[0]->device_name,
3880                                 port_array[0]->irq_level );
3881                 }
3882                 else {
3883                         port_array[0]->irq_requested = true;
3884                         adapter_test(port_array[0]);
3885                 }
3886         }
3887 }
3888
3889 static const struct tty_operations ops = {
3890         .open = open,
3891         .close = close,
3892         .write = write,
3893         .put_char = put_char,
3894         .flush_chars = flush_chars,
3895         .write_room = write_room,
3896         .chars_in_buffer = chars_in_buffer,
3897         .flush_buffer = flush_buffer,
3898         .ioctl = ioctl,
3899         .throttle = throttle,
3900         .unthrottle = unthrottle,
3901         .send_xchar = send_xchar,
3902         .break_ctl = set_break,
3903         .wait_until_sent = wait_until_sent,
3904         .read_proc = read_proc,
3905         .set_termios = set_termios,
3906         .stop = tx_hold,
3907         .start = tx_release,
3908         .hangup = hangup,
3909         .tiocmget = tiocmget,
3910         .tiocmset = tiocmset,
3911 };
3912
3913
3914 static void synclinkmp_cleanup(void)
3915 {
3916         int rc;
3917         SLMP_INFO *info;
3918         SLMP_INFO *tmp;
3919
3920         printk("Unloading %s %s\n", driver_name, driver_version);
3921
3922         if (serial_driver) {
3923                 if ((rc = tty_unregister_driver(serial_driver)))
3924                         printk("%s(%d) failed to unregister tty driver err=%d\n",
3925                                __FILE__,__LINE__,rc);
3926                 put_tty_driver(serial_driver);
3927         }
3928
3929         /* reset devices */
3930         info = synclinkmp_device_list;
3931         while(info) {
3932                 reset_port(info);
3933                 info = info->next_device;
3934         }
3935
3936         /* release devices */
3937         info = synclinkmp_device_list;
3938         while(info) {
3939 #if SYNCLINK_GENERIC_HDLC
3940                 hdlcdev_exit(info);
3941 #endif
3942                 free_dma_bufs(info);
3943                 free_tmp_rx_buf(info);
3944                 if ( info->port_num == 0 ) {
3945                         if (info->sca_base)
3946                                 write_reg(info, LPR, 1); /* set low power mode */
3947                         release_resources(info);
3948                 }
3949                 tmp = info;
3950                 info = info->next_device;
3951                 kfree(tmp);
3952         }
3953
3954         pci_unregister_driver(&synclinkmp_pci_driver);
3955 }
3956
3957 /* Driver initialization entry point.
3958  */
3959
3960 static int __init synclinkmp_init(void)
3961 {
3962         int rc;
3963
3964         if (break_on_load) {
3965                 synclinkmp_get_text_ptr();
3966                 BREAKPOINT();
3967         }
3968
3969         printk("%s %s\n", driver_name, driver_version);
3970
3971         if ((rc = pci_register_driver(&synclinkmp_pci_driver)) < 0) {
3972                 printk("%s:failed to register PCI driver, error=%d\n",__FILE__,rc);
3973                 return rc;
3974         }
3975
3976         serial_driver = alloc_tty_driver(128);
3977         if (!serial_driver) {
3978                 rc = -ENOMEM;
3979                 goto error;
3980         }
3981
3982         /* Initialize the tty_driver structure */
3983
3984         serial_driver->owner = THIS_MODULE;
3985         serial_driver->driver_name = "synclinkmp";
3986         serial_driver->name = "ttySLM";
3987         serial_driver->major = ttymajor;
3988         serial_driver->minor_start = 64;
3989         serial_driver->type = TTY_DRIVER_TYPE_SERIAL;
3990         serial_driver->subtype = SERIAL_TYPE_NORMAL;
3991         serial_driver->init_termios = tty_std_termios;
3992         serial_driver->init_termios.c_cflag =
3993                 B9600 | CS8 | CREAD | HUPCL | CLOCAL;
3994         serial_driver->init_termios.c_ispeed = 9600;
3995         serial_driver->init_termios.c_ospeed = 9600;
3996         serial_driver->flags = TTY_DRIVER_REAL_RAW;
3997         tty_set_operations(serial_driver, &ops);
3998         if ((rc = tty_register_driver(serial_driver)) < 0) {
3999                 printk("%s(%d):Couldn't register serial driver\n",
4000                         __FILE__,__LINE__);
4001                 put_tty_driver(serial_driver);
4002                 serial_driver = NULL;
4003                 goto error;
4004         }
4005
4006         printk("%s %s, tty major#%d\n",
4007                 driver_name, driver_version,
4008                 serial_driver->major);
4009
4010         return 0;
4011
4012 error:
4013         synclinkmp_cleanup();
4014         return rc;
4015 }
4016
4017 static void __exit synclinkmp_exit(void)
4018 {
4019         synclinkmp_cleanup();
4020 }
4021
4022 module_init(synclinkmp_init);
4023 module_exit(synclinkmp_exit);
4024
4025 /* Set the port for internal loopback mode.
4026  * The TxCLK and RxCLK signals are generated from the BRG and
4027  * the TxD is looped back to the RxD internally.
4028  */
4029 static void enable_loopback(SLMP_INFO *info, int enable)
4030 {
4031         if (enable) {
4032                 /* MD2 (Mode Register 2)
4033                  * 01..00  CNCT<1..0> Channel Connection 11=Local Loopback
4034                  */
4035                 write_reg(info, MD2, (unsigned char)(read_reg(info, MD2) | (BIT1 + BIT0)));
4036
4037                 /* degate external TxC clock source */
4038                 info->port_array[0]->ctrlreg_value |= (BIT0 << (info->port_num * 2));
4039                 write_control_reg(info);
4040
4041                 /* RXS/TXS (Rx/Tx clock source)
4042                  * 07      Reserved, must be 0
4043                  * 06..04  Clock Source, 100=BRG
4044                  * 03..00  Clock Divisor, 0000=1
4045                  */
4046                 write_reg(info, RXS, 0x40);
4047                 write_reg(info, TXS, 0x40);
4048
4049         } else {
4050                 /* MD2 (Mode Register 2)
4051                  * 01..00  CNCT<1..0> Channel connection, 0=normal
4052                  */
4053                 write_reg(info, MD2, (unsigned char)(read_reg(info, MD2) & ~(BIT1 + BIT0)));
4054
4055                 /* RXS/TXS (Rx/Tx clock source)
4056                  * 07      Reserved, must be 0
4057                  * 06..04  Clock Source, 000=RxC/TxC Pin
4058                  * 03..00  Clock Divisor, 0000=1
4059                  */
4060                 write_reg(info, RXS, 0x00);
4061                 write_reg(info, TXS, 0x00);
4062         }
4063
4064         /* set LinkSpeed if available, otherwise default to 2Mbps */
4065         if (info->params.clock_speed)
4066                 set_rate(info, info->params.clock_speed);
4067         else
4068                 set_rate(info, 3686400);
4069 }
4070
4071 /* Set the baud rate register to the desired speed
4072  *
4073  *      data_rate       data rate of clock in bits per second
4074  *                      A data rate of 0 disables the AUX clock.
4075  */
4076 static void set_rate( SLMP_INFO *info, u32 data_rate )
4077 {
4078         u32 TMCValue;
4079         unsigned char BRValue;
4080         u32 Divisor=0;
4081
4082         /* fBRG = fCLK/(TMC * 2^BR)
4083          */
4084         if (data_rate != 0) {
4085                 Divisor = 14745600/data_rate;
4086                 if (!Divisor)
4087                         Divisor = 1;
4088
4089                 TMCValue = Divisor;
4090
4091                 BRValue = 0;
4092                 if (TMCValue != 1 && TMCValue != 2) {
4093                         /* BRValue of 0 provides 50/50 duty cycle *only* when
4094                          * TMCValue is 1 or 2. BRValue of 1 to 9 always provides
4095                          * 50/50 duty cycle.
4096                          */
4097                         BRValue = 1;
4098                         TMCValue >>= 1;
4099                 }
4100
4101                 /* while TMCValue is too big for TMC register, divide
4102                  * by 2 and increment BR exponent.
4103                  */
4104                 for(; TMCValue > 256 && BRValue < 10; BRValue++)
4105                         TMCValue >>= 1;
4106
4107                 write_reg(info, TXS,
4108                         (unsigned char)((read_reg(info, TXS) & 0xf0) | BRValue));
4109                 write_reg(info, RXS,
4110                         (unsigned char)((read_reg(info, RXS) & 0xf0) | BRValue));
4111                 write_reg(info, TMC, (unsigned char)TMCValue);
4112         }
4113         else {
4114                 write_reg(info, TXS,0);
4115                 write_reg(info, RXS,0);
4116                 write_reg(info, TMC, 0);
4117         }
4118 }
4119
4120 /* Disable receiver
4121  */
4122 static void rx_stop(SLMP_INFO *info)
4123 {
4124         if (debug_level >= DEBUG_LEVEL_ISR)
4125                 printk("%s(%d):%s rx_stop()\n",
4126                          __FILE__,__LINE__, info->device_name );
4127
4128         write_reg(info, CMD, RXRESET);
4129
4130         info->ie0_value &= ~RXRDYE;
4131         write_reg(info, IE0, info->ie0_value);  /* disable Rx data interrupts */
4132
4133         write_reg(info, RXDMA + DSR, 0);        /* disable Rx DMA */
4134         write_reg(info, RXDMA + DCMD, SWABORT); /* reset/init Rx DMA */
4135         write_reg(info, RXDMA + DIR, 0);        /* disable Rx DMA interrupts */
4136
4137         info->rx_enabled = false;
4138         info->rx_overflow = false;
4139 }
4140
4141 /* enable the receiver
4142  */
4143 static void rx_start(SLMP_INFO *info)
4144 {
4145         int i;
4146
4147         if (debug_level >= DEBUG_LEVEL_ISR)
4148                 printk("%s(%d):%s rx_start()\n",
4149                          __FILE__,__LINE__, info->device_name );
4150
4151         write_reg(info, CMD, RXRESET);
4152
4153         if ( info->params.mode == MGSL_MODE_HDLC ) {
4154                 /* HDLC, disabe IRQ on rxdata */
4155                 info->ie0_value &= ~RXRDYE;
4156                 write_reg(info, IE0, info->ie0_value);
4157
4158                 /* Reset all Rx DMA buffers and program rx dma */
4159                 write_reg(info, RXDMA + DSR, 0);                /* disable Rx DMA */
4160                 write_reg(info, RXDMA + DCMD, SWABORT); /* reset/init Rx DMA */
4161
4162                 for (i = 0; i < info->rx_buf_count; i++) {
4163                         info->rx_buf_list[i].status = 0xff;
4164
4165                         // throttle to 4 shared memory writes at a time to prevent
4166                         // hogging local bus (keep latency time for DMA requests low).
4167                         if (!(i % 4))
4168                                 read_status_reg(info);
4169                 }
4170                 info->current_rx_buf = 0;
4171
4172                 /* set current/1st descriptor address */
4173                 write_reg16(info, RXDMA + CDA,
4174                         info->rx_buf_list_ex[0].phys_entry);
4175
4176                 /* set new last rx descriptor address */
4177                 write_reg16(info, RXDMA + EDA,
4178                         info->rx_buf_list_ex[info->rx_buf_count - 1].phys_entry);
4179
4180                 /* set buffer length (shared by all rx dma data buffers) */
4181                 write_reg16(info, RXDMA + BFL, SCABUFSIZE);
4182
4183                 write_reg(info, RXDMA + DIR, 0x60);     /* enable Rx DMA interrupts (EOM/BOF) */
4184                 write_reg(info, RXDMA + DSR, 0xf2);     /* clear Rx DMA IRQs, enable Rx DMA */
4185         } else {
4186                 /* async, enable IRQ on rxdata */
4187                 info->ie0_value |= RXRDYE;
4188                 write_reg(info, IE0, info->ie0_value);
4189         }
4190
4191         write_reg(info, CMD, RXENABLE);
4192
4193         info->rx_overflow = false;
4194         info->rx_enabled = true;
4195 }
4196
4197 /* Enable the transmitter and send a transmit frame if
4198  * one is loaded in the DMA buffers.
4199  */
4200 static void tx_start(SLMP_INFO *info)
4201 {
4202         if (debug_level >= DEBUG_LEVEL_ISR)
4203                 printk("%s(%d):%s tx_start() tx_count=%d\n",
4204                          __FILE__,__LINE__, info->device_name,info->tx_count );
4205
4206         if (!info->tx_enabled ) {
4207                 write_reg(info, CMD, TXRESET);
4208                 write_reg(info, CMD, TXENABLE);
4209                 info->tx_enabled = true;
4210         }
4211
4212         if ( info->tx_count ) {
4213
4214                 /* If auto RTS enabled and RTS is inactive, then assert */
4215                 /* RTS and set a flag indicating that the driver should */
4216                 /* negate RTS when the transmission completes. */
4217
4218                 info->drop_rts_on_tx_done = false;
4219
4220                 if (info->params.mode != MGSL_MODE_ASYNC) {
4221
4222                         if ( info->params.flags & HDLC_FLAG_AUTO_RTS ) {
4223                                 get_signals( info );
4224                                 if ( !(info->serial_signals & SerialSignal_RTS) ) {
4225                                         info->serial_signals |= SerialSignal_RTS;
4226                                         set_signals( info );
4227                                         info->drop_rts_on_tx_done = true;
4228                                 }
4229                         }
4230
4231                         write_reg16(info, TRC0,
4232                                 (unsigned short)(((tx_negate_fifo_level-1)<<8) + tx_active_fifo_level));
4233
4234                         write_reg(info, TXDMA + DSR, 0);                /* disable DMA channel */
4235                         write_reg(info, TXDMA + DCMD, SWABORT); /* reset/init DMA channel */
4236
4237                         /* set TX CDA (current descriptor address) */
4238                         write_reg16(info, TXDMA + CDA,
4239                                 info->tx_buf_list_ex[0].phys_entry);
4240
4241                         /* set TX EDA (last descriptor address) */
4242                         write_reg16(info, TXDMA + EDA,
4243                                 info->tx_buf_list_ex[info->last_tx_buf].phys_entry);
4244
4245                         /* enable underrun IRQ */
4246                         info->ie1_value &= ~IDLE;
4247                         info->ie1_value |= UDRN;
4248                         write_reg(info, IE1, info->ie1_value);
4249                         write_reg(info, SR1, (unsigned char)(IDLE + UDRN));
4250
4251                         write_reg(info, TXDMA + DIR, 0x40);             /* enable Tx DMA interrupts (EOM) */
4252                         write_reg(info, TXDMA + DSR, 0xf2);             /* clear Tx DMA IRQs, enable Tx DMA */
4253
4254                         mod_timer(&info->tx_timer, jiffies +
4255                                         msecs_to_jiffies(5000));
4256                 }
4257                 else {
4258                         tx_load_fifo(info);
4259                         /* async, enable IRQ on txdata */
4260                         info->ie0_value |= TXRDYE;
4261                         write_reg(info, IE0, info->ie0_value);
4262                 }
4263
4264                 info->tx_active = true;
4265         }
4266 }
4267
4268 /* stop the transmitter and DMA
4269  */
4270 static void tx_stop( SLMP_INFO *info )
4271 {
4272         if (debug_level >= DEBUG_LEVEL_ISR)
4273                 printk("%s(%d):%s tx_stop()\n",
4274                          __FILE__,__LINE__, info->device_name );
4275
4276         del_timer(&info->tx_timer);
4277
4278         write_reg(info, TXDMA + DSR, 0);                /* disable DMA channel */
4279         write_reg(info, TXDMA + DCMD, SWABORT); /* reset/init DMA channel */
4280
4281         write_reg(info, CMD, TXRESET);
4282
4283         info->ie1_value &= ~(UDRN + IDLE);
4284         write_reg(info, IE1, info->ie1_value);  /* disable tx status interrupts */
4285         write_reg(info, SR1, (unsigned char)(IDLE + UDRN));     /* clear pending */
4286
4287         info->ie0_value &= ~TXRDYE;
4288         write_reg(info, IE0, info->ie0_value);  /* disable tx data interrupts */
4289
4290         info->tx_enabled = false;
4291         info->tx_active = false;
4292 }
4293
4294 /* Fill the transmit FIFO until the FIFO is full or
4295  * there is no more data to load.
4296  */
4297 static void tx_load_fifo(SLMP_INFO *info)
4298 {
4299         u8 TwoBytes[2];
4300
4301         /* do nothing is now tx data available and no XON/XOFF pending */
4302
4303         if ( !info->tx_count && !info->x_char )
4304                 return;
4305
4306         /* load the Transmit FIFO until FIFOs full or all data sent */
4307
4308         while( info->tx_count && (read_reg(info,SR0) & BIT1) ) {
4309
4310                 /* there is more space in the transmit FIFO and */
4311                 /* there is more data in transmit buffer */
4312
4313                 if ( (info->tx_count > 1) && !info->x_char ) {
4314                         /* write 16-bits */
4315                         TwoBytes[0] = info->tx_buf[info->tx_get++];
4316                         if (info->tx_get >= info->max_frame_size)
4317                                 info->tx_get -= info->max_frame_size;
4318                         TwoBytes[1] = info->tx_buf[info->tx_get++];
4319                         if (info->tx_get >= info->max_frame_size)
4320                                 info->tx_get -= info->max_frame_size;
4321
4322                         write_reg16(info, TRB, *((u16 *)TwoBytes));
4323
4324                         info->tx_count -= 2;
4325                         info->icount.tx += 2;
4326                 } else {
4327                         /* only 1 byte left to transmit or 1 FIFO slot left */
4328
4329                         if (info->x_char) {
4330                                 /* transmit pending high priority char */
4331                                 write_reg(info, TRB, info->x_char);
4332                                 info->x_char = 0;
4333                         } else {
4334                                 write_reg(info, TRB, info->tx_buf[info->tx_get++]);
4335                                 if (info->tx_get >= info->max_frame_size)
4336                                         info->tx_get -= info->max_frame_size;
4337                                 info->tx_count--;
4338                         }
4339                         info->icount.tx++;
4340                 }
4341         }
4342 }
4343
4344 /* Reset a port to a known state
4345  */
4346 static void reset_port(SLMP_INFO *info)
4347 {
4348         if (info->sca_base) {
4349
4350                 tx_stop(info);
4351                 rx_stop(info);
4352
4353                 info->serial_signals &= ~(SerialSignal_DTR + SerialSignal_RTS);
4354                 set_signals(info);
4355
4356                 /* disable all port interrupts */
4357                 info->ie0_value = 0;
4358                 info->ie1_value = 0;
4359                 info->ie2_value = 0;
4360                 write_reg(info, IE0, info->ie0_value);
4361                 write_reg(info, IE1, info->ie1_value);
4362                 write_reg(info, IE2, info->ie2_value);
4363
4364                 write_reg(info, CMD, CHRESET);
4365         }
4366 }
4367
4368 /* Reset all the ports to a known state.
4369  */
4370 static void reset_adapter(SLMP_INFO *info)
4371 {
4372         int i;
4373
4374         for ( i=0; i < SCA_MAX_PORTS; ++i) {
4375                 if (info->port_array[i])
4376                         reset_port(info->port_array[i]);
4377         }
4378 }
4379
4380 /* Program port for asynchronous communications.
4381  */
4382 static void async_mode(SLMP_INFO *info)
4383 {
4384
4385         unsigned char RegValue;
4386
4387         tx_stop(info);
4388         rx_stop(info);
4389
4390         /* MD0, Mode Register 0
4391          *
4392          * 07..05  PRCTL<2..0>, Protocol Mode, 000=async
4393          * 04      AUTO, Auto-enable (RTS/CTS/DCD)
4394          * 03      Reserved, must be 0
4395          * 02      CRCCC, CRC Calculation, 0=disabled
4396          * 01..00  STOP<1..0> Stop bits (00=1,10=2)
4397          *
4398          * 0000 0000
4399          */
4400         RegValue = 0x00;
4401         if (info->params.stop_bits != 1)
4402                 RegValue |= BIT1;
4403         write_reg(info, MD0, RegValue);
4404
4405         /* MD1, Mode Register 1
4406          *
4407          * 07..06  BRATE<1..0>, bit rate, 00=1/1 01=1/16 10=1/32 11=1/64
4408          * 05..04  TXCHR<1..0>, tx char size, 00=8 bits,01=7,10=6,11=5
4409          * 03..02  RXCHR<1..0>, rx char size
4410          * 01..00  PMPM<1..0>, Parity mode, 00=none 10=even 11=odd
4411          *
4412          * 0100 0000
4413          */
4414         RegValue = 0x40;
4415         switch (info->params.data_bits) {
4416         case 7: RegValue |= BIT4 + BIT2; break;
4417         case 6: RegValue |= BIT5 + BIT3; break;
4418         case 5: RegValue |= BIT5 + BIT4 + BIT3 + BIT2; break;
4419         }
4420         if (info->params.parity != ASYNC_PARITY_NONE) {
4421                 RegValue |= BIT1;
4422                 if (info->params.parity == ASYNC_PARITY_ODD)
4423                         RegValue |= BIT0;
4424         }
4425         write_reg(info, MD1, RegValue);
4426
4427         /* MD2, Mode Register 2
4428          *
4429          * 07..02  Reserved, must be 0
4430          * 01..00  CNCT<1..0> Channel connection, 00=normal 11=local loopback
4431          *
4432          * 0000 0000
4433          */
4434         RegValue = 0x00;
4435         if (info->params.loopback)
4436                 RegValue |= (BIT1 + BIT0);
4437         write_reg(info, MD2, RegValue);
4438
4439         /* RXS, Receive clock source
4440          *
4441          * 07      Reserved, must be 0
4442          * 06..04  RXCS<2..0>, clock source, 000=RxC Pin, 100=BRG, 110=DPLL
4443          * 03..00  RXBR<3..0>, rate divisor, 0000=1
4444          */
4445         RegValue=BIT6;
4446         write_reg(info, RXS, RegValue);
4447
4448         /* TXS, Transmit clock source
4449          *
4450          * 07      Reserved, must be 0
4451          * 06..04  RXCS<2..0>, clock source, 000=TxC Pin, 100=BRG, 110=Receive Clock
4452          * 03..00  RXBR<3..0>, rate divisor, 0000=1
4453          */
4454         RegValue=BIT6;
4455         write_reg(info, TXS, RegValue);
4456
4457         /* Control Register
4458          *
4459          * 6,4,2,0  CLKSEL<3..0>, 0 = TcCLK in, 1 = Auxclk out
4460          */
4461         info->port_array[0]->ctrlreg_value |= (BIT0 << (info->port_num * 2));
4462         write_control_reg(info);
4463
4464         tx_set_idle(info);
4465
4466         /* RRC Receive Ready Control 0
4467          *
4468          * 07..05  Reserved, must be 0
4469          * 04..00  RRC<4..0> Rx FIFO trigger active 0x00 = 1 byte
4470          */
4471         write_reg(info, RRC, 0x00);
4472
4473         /* TRC0 Transmit Ready Control 0
4474          *
4475          * 07..05  Reserved, must be 0
4476          * 04..00  TRC<4..0> Tx FIFO trigger active 0x10 = 16 bytes
4477          */
4478         write_reg(info, TRC0, 0x10);
4479
4480         /* TRC1 Transmit Ready Control 1
4481          *
4482          * 07..05  Reserved, must be 0
4483          * 04..00  TRC<4..0> Tx FIFO trigger inactive 0x1e = 31 bytes (full-1)
4484          */
4485         write_reg(info, TRC1, 0x1e);
4486
4487         /* CTL, MSCI control register
4488          *
4489          * 07..06  Reserved, set to 0
4490          * 05      UDRNC, underrun control, 0=abort 1=CRC+flag (HDLC/BSC)
4491          * 04      IDLC, idle control, 0=mark 1=idle register
4492          * 03      BRK, break, 0=off 1 =on (async)
4493          * 02      SYNCLD, sync char load enable (BSC) 1=enabled
4494          * 01      GOP, go active on poll (LOOP mode) 1=enabled
4495          * 00      RTS, RTS output control, 0=active 1=inactive
4496          *
4497          * 0001 0001
4498          */
4499         RegValue = 0x10;
4500         if (!(info->serial_signals & SerialSignal_RTS))
4501                 RegValue |= 0x01;
4502         write_reg(info, CTL, RegValue);
4503
4504         /* enable status interrupts */
4505         info->ie0_value |= TXINTE + RXINTE;
4506         write_reg(info, IE0, info->ie0_value);
4507
4508         /* enable break detect interrupt */
4509         info->ie1_value = BRKD;
4510         write_reg(info, IE1, info->ie1_value);
4511
4512         /* enable rx overrun interrupt */
4513         info->ie2_value = OVRN;
4514         write_reg(info, IE2, info->ie2_value);
4515
4516         set_rate( info, info->params.data_rate * 16 );
4517 }
4518
4519 /* Program the SCA for HDLC communications.
4520  */
4521 static void hdlc_mode(SLMP_INFO *info)
4522 {
4523         unsigned char RegValue;
4524         u32 DpllDivisor;
4525
4526         // Can't use DPLL because SCA outputs recovered clock on RxC when
4527         // DPLL mode selected. This causes output contention with RxC receiver.
4528         // Use of DPLL would require external hardware to disable RxC receiver
4529         // when DPLL mode selected.
4530         info->params.flags &= ~(HDLC_FLAG_TXC_DPLL + HDLC_FLAG_RXC_DPLL);
4531
4532         /* disable DMA interrupts */
4533         write_reg(info, TXDMA + DIR, 0);
4534         write_reg(info, RXDMA + DIR, 0);
4535
4536         /* MD0, Mode Register 0
4537          *
4538          * 07..05  PRCTL<2..0>, Protocol Mode, 100=HDLC
4539          * 04      AUTO, Auto-enable (RTS/CTS/DCD)
4540          * 03      Reserved, must be 0
4541          * 02      CRCCC, CRC Calculation, 1=enabled
4542          * 01      CRC1, CRC selection, 0=CRC-16,1=CRC-CCITT-16
4543          * 00      CRC0, CRC initial value, 1 = all 1s
4544          *
4545          * 1000 0001
4546          */
4547         RegValue = 0x81;
4548         if (info->params.flags & HDLC_FLAG_AUTO_CTS)
4549                 RegValue |= BIT4;
4550         if (info->params.flags & HDLC_FLAG_AUTO_DCD)
4551                 RegValue |= BIT4;
4552         if (info->params.crc_type == HDLC_CRC_16_CCITT)
4553                 RegValue |= BIT2 + BIT1;
4554         write_reg(info, MD0, RegValue);
4555
4556         /* MD1, Mode Register 1
4557          *
4558          * 07..06  ADDRS<1..0>, Address detect, 00=no addr check
4559          * 05..04  TXCHR<1..0>, tx char size, 00=8 bits
4560          * 03..02  RXCHR<1..0>, rx char size, 00=8 bits
4561          * 01..00  PMPM<1..0>, Parity mode, 00=no parity
4562          *
4563          * 0000 0000
4564          */
4565         RegValue = 0x00;
4566         write_reg(info, MD1, RegValue);
4567
4568         /* MD2, Mode Register 2
4569          *
4570          * 07      NRZFM, 0=NRZ, 1=FM
4571          * 06..05  CODE<1..0> Encoding, 00=NRZ
4572          * 04..03  DRATE<1..0> DPLL Divisor, 00=8
4573          * 02      Reserved, must be 0
4574          * 01..00  CNCT<1..0> Channel connection, 0=normal
4575          *
4576          * 0000 0000
4577          */
4578         RegValue = 0x00;
4579         switch(info->params.encoding) {
4580         case HDLC_ENCODING_NRZI:          RegValue |= BIT5; break;
4581         case HDLC_ENCODING_BIPHASE_MARK:  RegValue |= BIT7 + BIT5; break; /* aka FM1 */
4582         case HDLC_ENCODING_BIPHASE_SPACE: RegValue |= BIT7 + BIT6; break; /* aka FM0 */
4583         case HDLC_ENCODING_BIPHASE_LEVEL: RegValue |= BIT7; break;      /* aka Manchester */
4584 #if 0
4585         case HDLC_ENCODING_NRZB:                                        /* not supported */
4586         case HDLC_ENCODING_NRZI_MARK:                                   /* not supported */
4587         case HDLC_ENCODING_DIFF_BIPHASE_LEVEL:                          /* not supported */
4588 #endif
4589         }
4590         if ( info->params.flags & HDLC_FLAG_DPLL_DIV16 ) {
4591                 DpllDivisor = 16;
4592                 RegValue |= BIT3;
4593         } else if ( info->params.flags & HDLC_FLAG_DPLL_DIV8 ) {
4594                 DpllDivisor = 8;
4595         } else {
4596                 DpllDivisor = 32;
4597                 RegValue |= BIT4;
4598         }
4599         write_reg(info, MD2, RegValue);
4600
4601
4602         /* RXS, Receive clock source
4603          *
4604          * 07      Reserved, must be 0
4605          * 06..04  RXCS<2..0>, clock source, 000=RxC Pin, 100=BRG, 110=DPLL
4606          * 03..00  RXBR<3..0>, rate divisor, 0000=1
4607          */
4608         RegValue=0;
4609         if (info->params.flags & HDLC_FLAG_RXC_BRG)
4610                 RegValue |= BIT6;
4611         if (info->params.flags & HDLC_FLAG_RXC_DPLL)
4612                 RegValue |= BIT6 + BIT5;
4613         write_reg(info, RXS, RegValue);
4614
4615         /* TXS, Transmit clock source
4616          *
4617          * 07      Reserved, must be 0
4618          * 06..04  RXCS<2..0>, clock source, 000=TxC Pin, 100=BRG, 110=Receive Clock
4619          * 03..00  RXBR<3..0>, rate divisor, 0000=1
4620          */
4621         RegValue=0;
4622         if (info->params.flags & HDLC_FLAG_TXC_BRG)
4623                 RegValue |= BIT6;
4624         if (info->params.flags & HDLC_FLAG_TXC_DPLL)
4625                 RegValue |= BIT6 + BIT5;
4626         write_reg(info, TXS, RegValue);
4627
4628         if (info->params.flags & HDLC_FLAG_RXC_DPLL)
4629                 set_rate(info, info->params.clock_speed * DpllDivisor);
4630         else
4631                 set_rate(info, info->params.clock_speed);
4632
4633         /* GPDATA (General Purpose I/O Data Register)
4634          *
4635          * 6,4,2,0  CLKSEL<3..0>, 0 = TcCLK in, 1 = Auxclk out
4636          */
4637         if (info->params.flags & HDLC_FLAG_TXC_BRG)
4638                 info->port_array[0]->ctrlreg_value |= (BIT0 << (info->port_num * 2));
4639         else
4640                 info->port_array[0]->ctrlreg_value &= ~(BIT0 << (info->port_num * 2));
4641         write_control_reg(info);
4642
4643         /* RRC Receive Ready Control 0
4644          *
4645          * 07..05  Reserved, must be 0
4646          * 04..00  RRC<4..0> Rx FIFO trigger active
4647          */
4648         write_reg(info, RRC, rx_active_fifo_level);
4649
4650         /* TRC0 Transmit Ready Control 0
4651          *
4652          * 07..05  Reserved, must be 0
4653          * 04..00  TRC<4..0> Tx FIFO trigger active
4654          */
4655         write_reg(info, TRC0, tx_active_fifo_level);
4656
4657         /* TRC1 Transmit Ready Control 1
4658          *
4659          * 07..05  Reserved, must be 0
4660          * 04..00  TRC<4..0> Tx FIFO trigger inactive 0x1f = 32 bytes (full)
4661          */
4662         write_reg(info, TRC1, (unsigned char)(tx_negate_fifo_level - 1));
4663
4664         /* DMR, DMA Mode Register
4665          *
4666          * 07..05  Reserved, must be 0
4667          * 04      TMOD, Transfer Mode: 1=chained-block
4668          * 03      Reserved, must be 0
4669          * 02      NF, Number of Frames: 1=multi-frame
4670          * 01      CNTE, Frame End IRQ Counter enable: 0=disabled
4671          * 00      Reserved, must be 0
4672          *
4673          * 0001 0100
4674          */
4675         write_reg(info, TXDMA + DMR, 0x14);
4676         write_reg(info, RXDMA + DMR, 0x14);
4677
4678         /* Set chain pointer base (upper 8 bits of 24 bit addr) */
4679         write_reg(info, RXDMA + CPB,
4680                 (unsigned char)(info->buffer_list_phys >> 16));
4681
4682         /* Set chain pointer base (upper 8 bits of 24 bit addr) */
4683         write_reg(info, TXDMA + CPB,
4684                 (unsigned char)(info->buffer_list_phys >> 16));
4685
4686         /* enable status interrupts. other code enables/disables
4687          * the individual sources for these two interrupt classes.
4688          */
4689         info->ie0_value |= TXINTE + RXINTE;
4690         write_reg(info, IE0, info->ie0_value);
4691
4692         /* CTL, MSCI control register
4693          *
4694          * 07..06  Reserved, set to 0
4695          * 05      UDRNC, underrun control, 0=abort 1=CRC+flag (HDLC/BSC)
4696          * 04      IDLC, idle control, 0=mark 1=idle register
4697          * 03      BRK, break, 0=off 1 =on (async)
4698          * 02      SYNCLD, sync char load enable (BSC) 1=enabled
4699          * 01      GOP, go active on poll (LOOP mode) 1=enabled
4700          * 00      RTS, RTS output control, 0=active 1=inactive
4701          *
4702          * 0001 0001
4703          */
4704         RegValue = 0x10;
4705         if (!(info->serial_signals & SerialSignal_RTS))
4706                 RegValue |= 0x01;
4707         write_reg(info, CTL, RegValue);
4708
4709         /* preamble not supported ! */
4710
4711         tx_set_idle(info);
4712         tx_stop(info);
4713         rx_stop(info);
4714
4715         set_rate(info, info->params.clock_speed);
4716
4717         if (info->params.loopback)
4718                 enable_loopback(info,1);
4719 }
4720
4721 /* Set the transmit HDLC idle mode
4722  */
4723 static void tx_set_idle(SLMP_INFO *info)
4724 {
4725         unsigned char RegValue = 0xff;
4726
4727         /* Map API idle mode to SCA register bits */
4728         switch(info->idle_mode) {
4729         case HDLC_TXIDLE_FLAGS:                 RegValue = 0x7e; break;
4730         case HDLC_TXIDLE_ALT_ZEROS_ONES:        RegValue = 0xaa; break;
4731         case HDLC_TXIDLE_ZEROS:                 RegValue = 0x00; break;
4732         case HDLC_TXIDLE_ONES:                  RegValue = 0xff; break;
4733         case HDLC_TXIDLE_ALT_MARK_SPACE:        RegValue = 0xaa; break;
4734         case HDLC_TXIDLE_SPACE:                 RegValue = 0x00; break;
4735         case HDLC_TXIDLE_MARK:                  RegValue = 0xff; break;
4736         }
4737
4738         write_reg(info, IDL, RegValue);
4739 }
4740
4741 /* Query the adapter for the state of the V24 status (input) signals.
4742  */
4743 static void get_signals(SLMP_INFO *info)
4744 {
4745         u16 status = read_reg(info, SR3);
4746         u16 gpstatus = read_status_reg(info);
4747         u16 testbit;
4748
4749         /* clear all serial signals except DTR and RTS */
4750         info->serial_signals &= SerialSignal_DTR + SerialSignal_RTS;
4751
4752         /* set serial signal bits to reflect MISR */
4753
4754         if (!(status & BIT3))
4755                 info->serial_signals |= SerialSignal_CTS;
4756
4757         if ( !(status & BIT2))
4758                 info->serial_signals |= SerialSignal_DCD;
4759
4760         testbit = BIT1 << (info->port_num * 2); // Port 0..3 RI is GPDATA<1,3,5,7>
4761         if (!(gpstatus & testbit))
4762                 info->serial_signals |= SerialSignal_RI;
4763
4764         testbit = BIT0 << (info->port_num * 2); // Port 0..3 DSR is GPDATA<0,2,4,6>
4765         if (!(gpstatus & testbit))
4766                 info->serial_signals |= SerialSignal_DSR;
4767 }
4768
4769 /* Set the state of DTR and RTS based on contents of
4770  * serial_signals member of device context.
4771  */
4772 static void set_signals(SLMP_INFO *info)
4773 {
4774         unsigned char RegValue;
4775         u16 EnableBit;
4776
4777         RegValue = read_reg(info, CTL);
4778         if (info->serial_signals & SerialSignal_RTS)
4779                 RegValue &= ~BIT0;
4780         else
4781                 RegValue |= BIT0;
4782         write_reg(info, CTL, RegValue);
4783
4784         // Port 0..3 DTR is ctrl reg <1,3,5,7>
4785         EnableBit = BIT1 << (info->port_num*2);
4786         if (info->serial_signals & SerialSignal_DTR)
4787                 info->port_array[0]->ctrlreg_value &= ~EnableBit;
4788         else
4789                 info->port_array[0]->ctrlreg_value |= EnableBit;
4790         write_control_reg(info);
4791 }
4792
4793 /*******************/
4794 /* DMA Buffer Code */
4795 /*******************/
4796
4797 /* Set the count for all receive buffers to SCABUFSIZE
4798  * and set the current buffer to the first buffer. This effectively
4799  * makes all buffers free and discards any data in buffers.
4800  */
4801 static void rx_reset_buffers(SLMP_INFO *info)
4802 {
4803         rx_free_frame_buffers(info, 0, info->rx_buf_count - 1);
4804 }
4805
4806 /* Free the buffers used by a received frame
4807  *
4808  * info   pointer to device instance data
4809  * first  index of 1st receive buffer of frame
4810  * last   index of last receive buffer of frame
4811  */
4812 static void rx_free_frame_buffers(SLMP_INFO *info, unsigned int first, unsigned int last)
4813 {
4814         bool done = false;
4815
4816         while(!done) {
4817                 /* reset current buffer for reuse */
4818                 info->rx_buf_list[first].status = 0xff;
4819
4820                 if (first == last) {
4821                         done = true;
4822                         /* set new last rx descriptor address */
4823                         write_reg16(info, RXDMA + EDA, info->rx_buf_list_ex[first].phys_entry);
4824                 }
4825
4826                 first++;
4827                 if (first == info->rx_buf_count)
4828                         first = 0;
4829         }
4830
4831         /* set current buffer to next buffer after last buffer of frame */
4832         info->current_rx_buf = first;
4833 }
4834
4835 /* Return a received frame from the receive DMA buffers.
4836  * Only frames received without errors are returned.
4837  *
4838  * Return Value:        true if frame returned, otherwise false
4839  */
4840 static bool rx_get_frame(SLMP_INFO *info)
4841 {
4842         unsigned int StartIndex, EndIndex;      /* index of 1st and last buffers of Rx frame */
4843         unsigned short status;
4844         unsigned int framesize = 0;
4845         bool ReturnCode = false;
4846         unsigned long flags;
4847         struct tty_struct *tty = info->port.tty;
4848         unsigned char addr_field = 0xff;
4849         SCADESC *desc;
4850         SCADESC_EX *desc_ex;
4851
4852 CheckAgain:
4853         /* assume no frame returned, set zero length */
4854         framesize = 0;
4855         addr_field = 0xff;
4856
4857         /*
4858          * current_rx_buf points to the 1st buffer of the next available
4859          * receive frame. To find the last buffer of the frame look for
4860          * a non-zero status field in the buffer entries. (The status
4861          * field is set by the 16C32 after completing a receive frame.
4862          */
4863         StartIndex = EndIndex = info->current_rx_buf;
4864
4865         for ( ;; ) {
4866                 desc = &info->rx_buf_list[EndIndex];
4867                 desc_ex = &info->rx_buf_list_ex[EndIndex];
4868
4869                 if (desc->status == 0xff)
4870                         goto Cleanup;   /* current desc still in use, no frames available */
4871
4872                 if (framesize == 0 && info->params.addr_filter != 0xff)
4873                         addr_field = desc_ex->virt_addr[0];
4874
4875                 framesize += desc->length;
4876
4877                 /* Status != 0 means last buffer of frame */
4878                 if (desc->status)
4879                         break;
4880
4881                 EndIndex++;
4882                 if (EndIndex == info->rx_buf_count)
4883                         EndIndex = 0;
4884
4885                 if (EndIndex == info->current_rx_buf) {
4886                         /* all buffers have been 'used' but none mark      */
4887                         /* the end of a frame. Reset buffers and receiver. */
4888                         if ( info->rx_enabled ){
4889                                 spin_lock_irqsave(&info->lock,flags);
4890                                 rx_start(info);
4891                                 spin_unlock_irqrestore(&info->lock,flags);
4892                         }
4893                         goto Cleanup;
4894                 }
4895
4896         }
4897
4898         /* check status of receive frame */
4899
4900         /* frame status is byte stored after frame data
4901          *
4902          * 7 EOM (end of msg), 1 = last buffer of frame
4903          * 6 Short Frame, 1 = short frame
4904          * 5 Abort, 1 = frame aborted
4905          * 4 Residue, 1 = last byte is partial
4906          * 3 Overrun, 1 = overrun occurred during frame reception
4907          * 2 CRC,     1 = CRC error detected
4908          *
4909          */
4910         status = desc->status;
4911
4912         /* ignore CRC bit if not using CRC (bit is undefined) */
4913         /* Note:CRC is not save to data buffer */
4914         if (info->params.crc_type == HDLC_CRC_NONE)
4915                 status &= ~BIT2;
4916
4917         if (framesize == 0 ||
4918                  (addr_field != 0xff && addr_field != info->params.addr_filter)) {
4919                 /* discard 0 byte frames, this seems to occur sometime
4920                  * when remote is idling flags.
4921                  */
4922                 rx_free_frame_buffers(info, StartIndex, EndIndex);
4923                 goto CheckAgain;
4924         }
4925
4926         if (framesize < 2)
4927                 status |= BIT6;
4928
4929         if (status & (BIT6+BIT5+BIT3+BIT2)) {
4930                 /* received frame has errors,
4931                  * update counts and mark frame size as 0
4932                  */
4933                 if (status & BIT6)
4934                         info->icount.rxshort++;
4935                 else if (status & BIT5)
4936                         info->icount.rxabort++;
4937                 else if (status & BIT3)
4938                         info->icount.rxover++;
4939                 else
4940                         info->icount.rxcrc++;
4941
4942                 framesize = 0;
4943 #if SYNCLINK_GENERIC_HDLC
4944                 {
4945                         info->netdev->stats.rx_errors++;
4946                         info->netdev->stats.rx_frame_errors++;
4947                 }
4948 #endif
4949         }
4950
4951         if ( debug_level >= DEBUG_LEVEL_BH )
4952                 printk("%s(%d):%s rx_get_frame() status=%04X size=%d\n",
4953                         __FILE__,__LINE__,info->device_name,status,framesize);
4954
4955         if ( debug_level >= DEBUG_LEVEL_DATA )
4956                 trace_block(info,info->rx_buf_list_ex[StartIndex].virt_addr,
4957                         min_t(int, framesize,SCABUFSIZE),0);
4958
4959         if (framesize) {
4960                 if (framesize > info->max_frame_size)
4961                         info->icount.rxlong++;
4962                 else {
4963                         /* copy dma buffer(s) to contiguous intermediate buffer */
4964                         int copy_count = framesize;
4965                         int index = StartIndex;
4966                         unsigned char *ptmp = info->tmp_rx_buf;
4967                         info->tmp_rx_buf_count = framesize;
4968
4969                         info->icount.rxok++;
4970
4971                         while(copy_count) {
4972                                 int partial_count = min(copy_count,SCABUFSIZE);
4973                                 memcpy( ptmp,
4974                                         info->rx_buf_list_ex[index].virt_addr,
4975                                         partial_count );
4976                                 ptmp += partial_count;
4977                                 copy_count -= partial_count;
4978
4979                                 if ( ++index == info->rx_buf_count )
4980                                         index = 0;
4981                         }
4982
4983 #if SYNCLINK_GENERIC_HDLC
4984                         if (info->netcount)
4985                                 hdlcdev_rx(info,info->tmp_rx_buf,framesize);
4986                         else
4987 #endif
4988                                 ldisc_receive_buf(tty,info->tmp_rx_buf,
4989                                                   info->flag_buf, framesize);
4990                 }
4991         }
4992         /* Free the buffers used by this frame. */
4993         rx_free_frame_buffers( info, StartIndex, EndIndex );
4994
4995         ReturnCode = true;
4996
4997 Cleanup:
4998         if ( info->rx_enabled && info->rx_overflow ) {
4999                 /* Receiver is enabled, but needs to restarted due to
5000                  * rx buffer overflow. If buffers are empty, restart receiver.
5001                  */
5002                 if (info->rx_buf_list[EndIndex].status == 0xff) {
5003                         spin_lock_irqsave(&info->lock,flags);
5004                         rx_start(info);
5005                         spin_unlock_irqrestore(&info->lock,flags);
5006                 }
5007         }
5008
5009         return ReturnCode;
5010 }
5011
5012 /* load the transmit DMA buffer with data
5013  */
5014 static void tx_load_dma_buffer(SLMP_INFO *info, const char *buf, unsigned int count)
5015 {
5016         unsigned short copy_count;
5017         unsigned int i = 0;
5018         SCADESC *desc;
5019         SCADESC_EX *desc_ex;
5020
5021         if ( debug_level >= DEBUG_LEVEL_DATA )
5022                 trace_block(info,buf, min_t(int, count,SCABUFSIZE), 1);
5023
5024         /* Copy source buffer to one or more DMA buffers, starting with
5025          * the first transmit dma buffer.
5026          */
5027         for(i=0;;)
5028         {
5029                 copy_count = min_t(unsigned short,count,SCABUFSIZE);
5030
5031                 desc = &info->tx_buf_list[i];
5032                 desc_ex = &info->tx_buf_list_ex[i];
5033
5034                 load_pci_memory(info, desc_ex->virt_addr,buf,copy_count);
5035
5036                 desc->length = copy_count;
5037                 desc->status = 0;
5038
5039                 buf += copy_count;
5040                 count -= copy_count;
5041
5042                 if (!count)
5043                         break;
5044
5045                 i++;
5046                 if (i >= info->tx_buf_count)
5047                         i = 0;
5048         }
5049
5050         info->tx_buf_list[i].status = 0x81;     /* set EOM and EOT status */
5051         info->last_tx_buf = ++i;
5052 }
5053
5054 static bool register_test(SLMP_INFO *info)
5055 {
5056         static unsigned char testval[] = {0x00, 0xff, 0xaa, 0x55, 0x69, 0x96};
5057         static unsigned int count = ARRAY_SIZE(testval);
5058         unsigned int i;
5059         bool rc = true;
5060         unsigned long flags;
5061
5062         spin_lock_irqsave(&info->lock,flags);
5063         reset_port(info);
5064
5065         /* assume failure */
5066         info->init_error = DiagStatus_AddressFailure;
5067
5068         /* Write bit patterns to various registers but do it out of */
5069         /* sync, then read back and verify values. */
5070
5071         for (i = 0 ; i < count ; i++) {
5072                 write_reg(info, TMC, testval[i]);
5073                 write_reg(info, IDL, testval[(i+1)%count]);
5074                 write_reg(info, SA0, testval[(i+2)%count]);
5075                 write_reg(info, SA1, testval[(i+3)%count]);
5076
5077                 if ( (read_reg(info, TMC) != testval[i]) ||
5078                           (read_reg(info, IDL) != testval[(i+1)%count]) ||
5079                           (read_reg(info, SA0) != testval[(i+2)%count]) ||
5080                           (read_reg(info, SA1) != testval[(i+3)%count]) )
5081                 {
5082                         rc = false;
5083                         break;
5084                 }
5085         }
5086
5087         reset_port(info);
5088         spin_unlock_irqrestore(&info->lock,flags);
5089
5090         return rc;
5091 }
5092
5093 static bool irq_test(SLMP_INFO *info)
5094 {
5095         unsigned long timeout;
5096         unsigned long flags;
5097
5098         unsigned char timer = (info->port_num & 1) ? TIMER2 : TIMER0;
5099
5100         spin_lock_irqsave(&info->lock,flags);
5101         reset_port(info);
5102
5103         /* assume failure */
5104         info->init_error = DiagStatus_IrqFailure;
5105         info->irq_occurred = false;
5106
5107         /* setup timer0 on SCA0 to interrupt */
5108
5109         /* IER2<7..4> = timer<3..0> interrupt enables (1=enabled) */
5110         write_reg(info, IER2, (unsigned char)((info->port_num & 1) ? BIT6 : BIT4));
5111
5112         write_reg(info, (unsigned char)(timer + TEPR), 0);      /* timer expand prescale */
5113         write_reg16(info, (unsigned char)(timer + TCONR), 1);   /* timer constant */
5114
5115
5116         /* TMCS, Timer Control/Status Register
5117          *
5118          * 07      CMF, Compare match flag (read only) 1=match
5119          * 06      ECMI, CMF Interrupt Enable: 1=enabled
5120          * 05      Reserved, must be 0
5121          * 04      TME, Timer Enable
5122          * 03..00  Reserved, must be 0
5123          *
5124          * 0101 0000
5125          */
5126         write_reg(info, (unsigned char)(timer + TMCS), 0x50);
5127
5128         spin_unlock_irqrestore(&info->lock,flags);
5129
5130         timeout=100;
5131         while( timeout-- && !info->irq_occurred ) {
5132                 msleep_interruptible(10);
5133         }
5134
5135         spin_lock_irqsave(&info->lock,flags);
5136         reset_port(info);
5137         spin_unlock_irqrestore(&info->lock,flags);
5138
5139         return info->irq_occurred;
5140 }
5141
5142 /* initialize individual SCA device (2 ports)
5143  */
5144 static bool sca_init(SLMP_INFO *info)
5145 {
5146         /* set wait controller to single mem partition (low), no wait states */
5147         write_reg(info, PABR0, 0);      /* wait controller addr boundary 0 */
5148         write_reg(info, PABR1, 0);      /* wait controller addr boundary 1 */
5149         write_reg(info, WCRL, 0);       /* wait controller low range */
5150         write_reg(info, WCRM, 0);       /* wait controller mid range */
5151         write_reg(info, WCRH, 0);       /* wait controller high range */
5152
5153         /* DPCR, DMA Priority Control
5154          *
5155          * 07..05  Not used, must be 0
5156          * 04      BRC, bus release condition: 0=all transfers complete
5157          * 03      CCC, channel change condition: 0=every cycle
5158          * 02..00  PR<2..0>, priority 100=round robin
5159          *
5160          * 00000100 = 0x04
5161          */
5162         write_reg(info, DPCR, dma_priority);
5163
5164         /* DMA Master Enable, BIT7: 1=enable all channels */
5165         write_reg(info, DMER, 0x80);
5166
5167         /* enable all interrupt classes */
5168         write_reg(info, IER0, 0xff);    /* TxRDY,RxRDY,TxINT,RxINT (ports 0-1) */
5169         write_reg(info, IER1, 0xff);    /* DMIB,DMIA (channels 0-3) */
5170         write_reg(info, IER2, 0xf0);    /* TIRQ (timers 0-3) */
5171
5172         /* ITCR, interrupt control register
5173          * 07      IPC, interrupt priority, 0=MSCI->DMA
5174          * 06..05  IAK<1..0>, Acknowledge cycle, 00=non-ack cycle
5175          * 04      VOS, Vector Output, 0=unmodified vector
5176          * 03..00  Reserved, must be 0
5177          */
5178         write_reg(info, ITCR, 0);
5179
5180         return true;
5181 }
5182
5183 /* initialize adapter hardware
5184  */
5185 static bool init_adapter(SLMP_INFO *info)
5186 {
5187         int i;
5188
5189         /* Set BIT30 of Local Control Reg 0x50 to reset SCA */
5190         volatile u32 *MiscCtrl = (u32 *)(info->lcr_base + 0x50);
5191         u32 readval;
5192
5193         info->misc_ctrl_value |= BIT30;
5194         *MiscCtrl = info->misc_ctrl_value;
5195
5196         /*
5197          * Force at least 170ns delay before clearing
5198          * reset bit. Each read from LCR takes at least
5199          * 30ns so 10 times for 300ns to be safe.
5200          */
5201         for(i=0;i<10;i++)
5202                 readval = *MiscCtrl;
5203
5204         info->misc_ctrl_value &= ~BIT30;
5205         *MiscCtrl = info->misc_ctrl_value;
5206
5207         /* init control reg (all DTRs off, all clksel=input) */
5208         info->ctrlreg_value = 0xaa;
5209         write_control_reg(info);
5210
5211         {
5212                 volatile u32 *LCR1BRDR = (u32 *)(info->lcr_base + 0x2c);
5213                 lcr1_brdr_value &= ~(BIT5 + BIT4 + BIT3);
5214
5215                 switch(read_ahead_count)
5216                 {
5217                 case 16:
5218                         lcr1_brdr_value |= BIT5 + BIT4 + BIT3;
5219                         break;
5220                 case 8:
5221                         lcr1_brdr_value |= BIT5 + BIT4;
5222                         break;
5223                 case 4:
5224                         lcr1_brdr_value |= BIT5 + BIT3;
5225                         break;
5226                 case 0:
5227                         lcr1_brdr_value |= BIT5;
5228                         break;
5229                 }
5230
5231                 *LCR1BRDR = lcr1_brdr_value;
5232                 *MiscCtrl = misc_ctrl_value;
5233         }
5234
5235         sca_init(info->port_array[0]);
5236         sca_init(info->port_array[2]);
5237
5238         return true;
5239 }
5240
5241 /* Loopback an HDLC frame to test the hardware
5242  * interrupt and DMA functions.
5243  */
5244 static bool loopback_test(SLMP_INFO *info)
5245 {
5246 #define TESTFRAMESIZE 20
5247
5248         unsigned long timeout;
5249         u16 count = TESTFRAMESIZE;
5250         unsigned char buf[TESTFRAMESIZE];
5251         bool rc = false;
5252         unsigned long flags;
5253
5254         struct tty_struct *oldtty = info->port.tty;
5255         u32 speed = info->params.clock_speed;
5256
5257         info->params.clock_speed = 3686400;
5258         info->port.tty = NULL;
5259
5260         /* assume failure */
5261         info->init_error = DiagStatus_DmaFailure;
5262
5263         /* build and send transmit frame */
5264         for (count = 0; count < TESTFRAMESIZE;++count)
5265                 buf[count] = (unsigned char)count;
5266
5267         memset(info->tmp_rx_buf,0,TESTFRAMESIZE);
5268
5269         /* program hardware for HDLC and enabled receiver */
5270         spin_lock_irqsave(&info->lock,flags);
5271         hdlc_mode(info);
5272         enable_loopback(info,1);
5273         rx_start(info);
5274         info->tx_count = count;
5275         tx_load_dma_buffer(info,buf,count);
5276         tx_start(info);
5277         spin_unlock_irqrestore(&info->lock,flags);
5278
5279         /* wait for receive complete */
5280         /* Set a timeout for waiting for interrupt. */
5281         for ( timeout = 100; timeout; --timeout ) {
5282                 msleep_interruptible(10);
5283
5284                 if (rx_get_frame(info)) {
5285                         rc = true;
5286                         break;
5287                 }
5288         }
5289
5290         /* verify received frame length and contents */
5291         if (rc &&
5292             ( info->tmp_rx_buf_count != count ||
5293               memcmp(buf, info->tmp_rx_buf,count))) {
5294                 rc = false;
5295         }
5296
5297         spin_lock_irqsave(&info->lock,flags);
5298         reset_adapter(info);
5299         spin_unlock_irqrestore(&info->lock,flags);
5300
5301         info->params.clock_speed = speed;
5302         info->port.tty = oldtty;
5303
5304         return rc;
5305 }
5306
5307 /* Perform diagnostics on hardware
5308  */
5309 static int adapter_test( SLMP_INFO *info )
5310 {
5311         unsigned long flags;
5312         if ( debug_level >= DEBUG_LEVEL_INFO )
5313                 printk( "%s(%d):Testing device %s\n",
5314                         __FILE__,__LINE__,info->device_name );
5315
5316         spin_lock_irqsave(&info->lock,flags);
5317         init_adapter(info);
5318         spin_unlock_irqrestore(&info->lock,flags);
5319
5320         info->port_array[0]->port_count = 0;
5321
5322         if ( register_test(info->port_array[0]) &&
5323                 register_test(info->port_array[1])) {
5324
5325                 info->port_array[0]->port_count = 2;
5326
5327                 if ( register_test(info->port_array[2]) &&
5328                         register_test(info->port_array[3]) )
5329                         info->port_array[0]->port_count += 2;
5330         }
5331         else {
5332                 printk( "%s(%d):Register test failure for device %s Addr=%08lX\n",
5333                         __FILE__,__LINE__,info->device_name, (unsigned long)(info->phys_sca_base));
5334                 return -ENODEV;
5335         }
5336
5337         if ( !irq_test(info->port_array[0]) ||
5338                 !irq_test(info->port_array[1]) ||
5339                  (info->port_count == 4 && !irq_test(info->port_array[2])) ||
5340                  (info->port_count == 4 && !irq_test(info->port_array[3]))) {
5341                 printk( "%s(%d):Interrupt test failure for device %s IRQ=%d\n",
5342                         __FILE__,__LINE__,info->device_name, (unsigned short)(info->irq_level) );
5343                 return -ENODEV;
5344         }
5345
5346         if (!loopback_test(info->port_array[0]) ||
5347                 !loopback_test(info->port_array[1]) ||
5348                  (info->port_count == 4 && !loopback_test(info->port_array[2])) ||
5349                  (info->port_count == 4 && !loopback_test(info->port_array[3]))) {
5350                 printk( "%s(%d):DMA test failure for device %s\n",
5351                         __FILE__,__LINE__,info->device_name);
5352                 return -ENODEV;
5353         }
5354
5355         if ( debug_level >= DEBUG_LEVEL_INFO )
5356                 printk( "%s(%d):device %s passed diagnostics\n",
5357                         __FILE__,__LINE__,info->device_name );
5358
5359         info->port_array[0]->init_error = 0;
5360         info->port_array[1]->init_error = 0;
5361         if ( info->port_count > 2 ) {
5362                 info->port_array[2]->init_error = 0;
5363                 info->port_array[3]->init_error = 0;
5364         }
5365
5366         return 0;
5367 }
5368
5369 /* Test the shared memory on a PCI adapter.
5370  */
5371 static bool memory_test(SLMP_INFO *info)
5372 {
5373         static unsigned long testval[] = { 0x0, 0x55555555, 0xaaaaaaaa,
5374                 0x66666666, 0x99999999, 0xffffffff, 0x12345678 };
5375         unsigned long count = ARRAY_SIZE(testval);
5376         unsigned long i;
5377         unsigned long limit = SCA_MEM_SIZE/sizeof(unsigned long);
5378         unsigned long * addr = (unsigned long *)info->memory_base;
5379
5380         /* Test data lines with test pattern at one location. */
5381
5382         for ( i = 0 ; i < count ; i++ ) {
5383                 *addr = testval[i];
5384                 if ( *addr != testval[i] )
5385                         return false;
5386         }
5387
5388         /* Test address lines with incrementing pattern over */
5389         /* entire address range. */
5390
5391         for ( i = 0 ; i < limit ; i++ ) {
5392                 *addr = i * 4;
5393                 addr++;
5394         }
5395
5396         addr = (unsigned long *)info->memory_base;
5397
5398         for ( i = 0 ; i < limit ; i++ ) {
5399                 if ( *addr != i * 4 )
5400                         return false;
5401                 addr++;
5402         }
5403
5404         memset( info->memory_base, 0, SCA_MEM_SIZE );
5405         return true;
5406 }
5407
5408 /* Load data into PCI adapter shared memory.
5409  *
5410  * The PCI9050 releases control of the local bus
5411  * after completing the current read or write operation.
5412  *
5413  * While the PCI9050 write FIFO not empty, the
5414  * PCI9050 treats all of the writes as a single transaction
5415  * and does not release the bus. This causes DMA latency problems
5416  * at high speeds when copying large data blocks to the shared memory.
5417  *
5418  * This function breaks a write into multiple transations by
5419  * interleaving a read which flushes the write FIFO and 'completes'
5420  * the write transation. This allows any pending DMA request to gain control
5421  * of the local bus in a timely fasion.
5422  */
5423 static void load_pci_memory(SLMP_INFO *info, char* dest, const char* src, unsigned short count)
5424 {
5425         /* A load interval of 16 allows for 4 32-bit writes at */
5426         /* 136ns each for a maximum latency of 542ns on the local bus.*/
5427
5428         unsigned short interval = count / sca_pci_load_interval;
5429         unsigned short i;
5430
5431         for ( i = 0 ; i < interval ; i++ )
5432         {
5433                 memcpy(dest, src, sca_pci_load_interval);
5434                 read_status_reg(info);
5435                 dest += sca_pci_load_interval;
5436                 src += sca_pci_load_interval;
5437         }
5438
5439         memcpy(dest, src, count % sca_pci_load_interval);
5440 }
5441
5442 static void trace_block(SLMP_INFO *info,const char* data, int count, int xmit)
5443 {
5444         int i;
5445         int linecount;
5446         if (xmit)
5447                 printk("%s tx data:\n",info->device_name);
5448         else
5449                 printk("%s rx data:\n",info->device_name);
5450
5451         while(count) {
5452                 if (count > 16)
5453                         linecount = 16;
5454                 else
5455                         linecount = count;
5456
5457                 for(i=0;i<linecount;i++)
5458                         printk("%02X ",(unsigned char)data[i]);
5459                 for(;i<17;i++)
5460                         printk("   ");
5461                 for(i=0;i<linecount;i++) {
5462                         if (data[i]>=040 && data[i]<=0176)
5463                                 printk("%c",data[i]);
5464                         else
5465                                 printk(".");
5466                 }
5467                 printk("\n");
5468
5469                 data  += linecount;
5470                 count -= linecount;
5471         }
5472 }       /* end of trace_block() */
5473
5474 /* called when HDLC frame times out
5475  * update stats and do tx completion processing
5476  */
5477 static void tx_timeout(unsigned long context)
5478 {
5479         SLMP_INFO *info = (SLMP_INFO*)context;
5480         unsigned long flags;
5481
5482         if ( debug_level >= DEBUG_LEVEL_INFO )
5483                 printk( "%s(%d):%s tx_timeout()\n",
5484                         __FILE__,__LINE__,info->device_name);
5485         if(info->tx_active && info->params.mode == MGSL_MODE_HDLC) {
5486                 info->icount.txtimeout++;
5487         }
5488         spin_lock_irqsave(&info->lock,flags);
5489         info->tx_active = false;
5490         info->tx_count = info->tx_put = info->tx_get = 0;
5491
5492         spin_unlock_irqrestore(&info->lock,flags);
5493
5494 #if SYNCLINK_GENERIC_HDLC
5495         if (info->netcount)
5496                 hdlcdev_tx_done(info);
5497         else
5498 #endif
5499                 bh_transmit(info);
5500 }
5501
5502 /* called to periodically check the DSR/RI modem signal input status
5503  */
5504 static void status_timeout(unsigned long context)
5505 {
5506         u16 status = 0;
5507         SLMP_INFO *info = (SLMP_INFO*)context;
5508         unsigned long flags;
5509         unsigned char delta;
5510
5511
5512         spin_lock_irqsave(&info->lock,flags);
5513         get_signals(info);
5514         spin_unlock_irqrestore(&info->lock,flags);
5515
5516         /* check for DSR/RI state change */
5517
5518         delta = info->old_signals ^ info->serial_signals;
5519         info->old_signals = info->serial_signals;
5520
5521         if (delta & SerialSignal_DSR)
5522                 status |= MISCSTATUS_DSR_LATCHED|(info->serial_signals&SerialSignal_DSR);
5523
5524         if (delta & SerialSignal_RI)
5525                 status |= MISCSTATUS_RI_LATCHED|(info->serial_signals&SerialSignal_RI);
5526
5527         if (delta & SerialSignal_DCD)
5528                 status |= MISCSTATUS_DCD_LATCHED|(info->serial_signals&SerialSignal_DCD);
5529
5530         if (delta & SerialSignal_CTS)
5531                 status |= MISCSTATUS_CTS_LATCHED|(info->serial_signals&SerialSignal_CTS);
5532
5533         if (status)
5534                 isr_io_pin(info,status);
5535
5536         mod_timer(&info->status_timer, jiffies + msecs_to_jiffies(10));
5537 }
5538
5539
5540 /* Register Access Routines -
5541  * All registers are memory mapped
5542  */
5543 #define CALC_REGADDR() \
5544         unsigned char * RegAddr = (unsigned char*)(info->sca_base + Addr); \
5545         if (info->port_num > 1) \
5546                 RegAddr += 256;                 /* port 0-1 SCA0, 2-3 SCA1 */ \
5547         if ( info->port_num & 1) { \
5548                 if (Addr > 0x7f) \
5549                         RegAddr += 0x40;        /* DMA access */ \
5550                 else if (Addr > 0x1f && Addr < 0x60) \
5551                         RegAddr += 0x20;        /* MSCI access */ \
5552         }
5553
5554
5555 static unsigned char read_reg(SLMP_INFO * info, unsigned char Addr)
5556 {
5557         CALC_REGADDR();
5558         return *RegAddr;
5559 }
5560 static void write_reg(SLMP_INFO * info, unsigned char Addr, unsigned char Value)
5561 {
5562         CALC_REGADDR();
5563         *RegAddr = Value;
5564 }
5565
5566 static u16 read_reg16(SLMP_INFO * info, unsigned char Addr)
5567 {
5568         CALC_REGADDR();
5569         return *((u16 *)RegAddr);
5570 }
5571
5572 static void write_reg16(SLMP_INFO * info, unsigned char Addr, u16 Value)
5573 {
5574         CALC_REGADDR();
5575         *((u16 *)RegAddr) = Value;
5576 }
5577
5578 static unsigned char read_status_reg(SLMP_INFO * info)
5579 {
5580         unsigned char *RegAddr = (unsigned char *)info->statctrl_base;
5581         return *RegAddr;
5582 }
5583
5584 static void write_control_reg(SLMP_INFO * info)
5585 {
5586         unsigned char *RegAddr = (unsigned char *)info->statctrl_base;
5587         *RegAddr = info->port_array[0]->ctrlreg_value;
5588 }
5589
5590
5591 static int __devinit synclinkmp_init_one (struct pci_dev *dev,
5592                                           const struct pci_device_id *ent)
5593 {
5594         if (pci_enable_device(dev)) {
5595                 printk("error enabling pci device %p\n", dev);
5596                 return -EIO;
5597         }
5598         device_init( ++synclinkmp_adapter_count, dev );
5599         return 0;
5600 }
5601
5602 static void __devexit synclinkmp_remove_one (struct pci_dev *dev)
5603 {
5604 }