Merge branch 'drm-next' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied...
[linux-2.6] / drivers / net / phy / et1011c.c
1 /*
2  * drivers/net/phy/et1011c.c
3  *
4  * Driver for LSI ET1011C PHYs
5  *
6  * Author: Chaithrika U S
7  *
8  * Copyright (c) 2008 Texas Instruments
9  *
10  * This program is free software; you can redistribute  it and/or modify it
11  * under  the terms of  the GNU General  Public License as published by the
12  * Free Software Foundation;  either version 2 of the  License, or (at your
13  * option) any later version.
14  *
15  */
16 #include <linux/kernel.h>
17 #include <linux/string.h>
18 #include <linux/errno.h>
19 #include <linux/unistd.h>
20 #include <linux/slab.h>
21 #include <linux/interrupt.h>
22 #include <linux/init.h>
23 #include <linux/delay.h>
24 #include <linux/netdevice.h>
25 #include <linux/etherdevice.h>
26 #include <linux/skbuff.h>
27 #include <linux/spinlock.h>
28 #include <linux/mm.h>
29 #include <linux/module.h>
30 #include <linux/mii.h>
31 #include <linux/ethtool.h>
32 #include <linux/phy.h>
33 #include <linux/io.h>
34 #include <linux/uaccess.h>
35 #include <asm/irq.h>
36
37 #define ET1011C_STATUS_REG      (0x1A)
38 #define ET1011C_CONFIG_REG      (0x16)
39 #define ET1011C_SPEED_MASK              (0x0300)
40 #define ET1011C_GIGABIT_SPEED           (0x0200)
41 #define ET1011C_TX_FIFO_MASK            (0x3000)
42 #define ET1011C_TX_FIFO_DEPTH_8         (0x0000)
43 #define ET1011C_TX_FIFO_DEPTH_16        (0x1000)
44 #define ET1011C_INTERFACE_MASK          (0x0007)
45 #define ET1011C_GMII_INTERFACE          (0x0002)
46 #define ET1011C_SYS_CLK_EN              (0x01 << 4)
47
48
49 MODULE_DESCRIPTION("LSI ET1011C PHY driver");
50 MODULE_AUTHOR("Chaithrika U S");
51 MODULE_LICENSE("GPL");
52
53 static int et1011c_config_aneg(struct phy_device *phydev)
54 {
55         int ctl = 0;
56         ctl = phy_read(phydev, MII_BMCR);
57         if (ctl < 0)
58                 return ctl;
59         ctl &= ~(BMCR_FULLDPLX | BMCR_SPEED100 | BMCR_SPEED1000 |
60                  BMCR_ANENABLE);
61         /* First clear the PHY */
62         phy_write(phydev, MII_BMCR, ctl | BMCR_RESET);
63
64         return genphy_config_aneg(phydev);
65 }
66
67 static int et1011c_read_status(struct phy_device *phydev)
68 {
69         int ret;
70         u32 val;
71         static int speed;
72         ret = genphy_read_status(phydev);
73
74         if (speed != phydev->speed) {
75                 speed = phydev->speed;
76                 val = phy_read(phydev, ET1011C_STATUS_REG);
77                 if ((val & ET1011C_SPEED_MASK) ==
78                                         ET1011C_GIGABIT_SPEED) {
79                         val = phy_read(phydev, ET1011C_CONFIG_REG);
80                         val &= ~ET1011C_TX_FIFO_MASK;
81                         phy_write(phydev, ET1011C_CONFIG_REG, val\
82                                         | ET1011C_GMII_INTERFACE\
83                                         | ET1011C_SYS_CLK_EN\
84                                         | ET1011C_TX_FIFO_DEPTH_16);
85
86                 }
87         }
88         return ret;
89 }
90
91 static struct phy_driver et1011c_driver = {
92         .phy_id         = 0x0282f014,
93         .name           = "ET1011C",
94         .phy_id_mask    = 0xfffffff0,
95         .features       = (PHY_BASIC_FEATURES | SUPPORTED_1000baseT_Full),
96         .flags          = PHY_POLL,
97         .config_aneg    = et1011c_config_aneg,
98         .read_status    = et1011c_read_status,
99         .driver         = { .owner = THIS_MODULE,},
100 };
101
102 static int __init et1011c_init(void)
103 {
104         return phy_driver_register(&et1011c_driver);
105 }
106
107 static void __exit et1011c_exit(void)
108 {
109         phy_driver_unregister(&et1011c_driver);
110 }
111
112 module_init(et1011c_init);
113 module_exit(et1011c_exit);