5 this file has configuration informations - card-specific stuff
6 like the big tvcards array for the most part
8 Copyright (C) 1996,97,98 Ralph Metzler (rjkm@thp.uni-koeln.de)
9 & Marcus Metzler (mocm@thp.uni-koeln.de)
10 (c) 1999-2001 Gerd Knorr <kraxel@goldbach.in-berlin.de>
12 This program is free software; you can redistribute it and/or modify
13 it under the terms of the GNU General Public License as published by
14 the Free Software Foundation; either version 2 of the License, or
15 (at your option) any later version.
17 This program is distributed in the hope that it will be useful,
18 but WITHOUT ANY WARRANTY; without even the implied warranty of
19 MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
20 GNU General Public License for more details.
22 You should have received a copy of the GNU General Public License
23 along with this program; if not, write to the Free Software
24 Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
28 #include <linux/delay.h>
29 #include <linux/module.h>
30 #include <linux/kmod.h>
31 #include <linux/init.h>
32 #include <linux/pci.h>
33 #include <linux/vmalloc.h>
34 #include <linux/firmware.h>
35 #include <net/checksum.h>
37 #include <asm/unaligned.h>
41 #include <media/v4l2-common.h>
42 #include <media/tvaudio.h>
43 #include "bttv-audio-hook.h"
46 static void boot_msp34xx(struct bttv *btv, int pin);
47 static void hauppauge_eeprom(struct bttv *btv);
48 static void avermedia_eeprom(struct bttv *btv);
49 static void osprey_eeprom(struct bttv *btv, const u8 ee[256]);
50 static void modtec_eeprom(struct bttv *btv);
51 static void init_PXC200(struct bttv *btv);
52 static void init_RTV24(struct bttv *btv);
54 static void rv605_muxsel(struct bttv *btv, unsigned int input);
55 static void eagle_muxsel(struct bttv *btv, unsigned int input);
56 static void xguard_muxsel(struct bttv *btv, unsigned int input);
57 static void ivc120_muxsel(struct bttv *btv, unsigned int input);
58 static void gvc1100_muxsel(struct bttv *btv, unsigned int input);
60 static void PXC200_muxsel(struct bttv *btv, unsigned int input);
62 static void picolo_tetra_muxsel(struct bttv *btv, unsigned int input);
63 static void picolo_tetra_init(struct bttv *btv);
65 static void tibetCS16_muxsel(struct bttv *btv, unsigned int input);
66 static void tibetCS16_init(struct bttv *btv);
68 static void kodicom4400r_muxsel(struct bttv *btv, unsigned int input);
69 static void kodicom4400r_init(struct bttv *btv);
71 static void sigmaSLC_muxsel(struct bttv *btv, unsigned int input);
72 static void sigmaSQ_muxsel(struct bttv *btv, unsigned int input);
74 static void geovision_muxsel(struct bttv *btv, unsigned int input);
76 static void phytec_muxsel(struct bttv *btv, unsigned int input);
78 static void gv800s_muxsel(struct bttv *btv, unsigned int input);
79 static void gv800s_init(struct bttv *btv);
81 static int terratec_active_radio_upgrade(struct bttv *btv);
82 static int tea5757_read(struct bttv *btv);
83 static int tea5757_write(struct bttv *btv, int value);
84 static void identify_by_eeprom(struct bttv *btv,
85 unsigned char eeprom_data[256]);
86 static int __devinit pvr_boot(struct bttv *btv);
88 /* config variables */
89 static unsigned int triton1;
90 static unsigned int vsfx;
91 static unsigned int latency = UNSET;
94 static unsigned int card[BTTV_MAX] = { [ 0 ... (BTTV_MAX-1) ] = UNSET };
95 static unsigned int pll[BTTV_MAX] = { [ 0 ... (BTTV_MAX-1) ] = UNSET };
96 static unsigned int tuner[BTTV_MAX] = { [ 0 ... (BTTV_MAX-1) ] = UNSET };
97 static unsigned int svhs[BTTV_MAX] = { [ 0 ... (BTTV_MAX-1) ] = UNSET };
98 static unsigned int remote[BTTV_MAX] = { [ 0 ... (BTTV_MAX-1) ] = UNSET };
99 static unsigned int audiodev[BTTV_MAX];
100 static unsigned int saa6588[BTTV_MAX];
101 static struct bttv *master[BTTV_MAX] = { [ 0 ... (BTTV_MAX-1) ] = NULL };
102 static unsigned int autoload = UNSET;
103 static unsigned int gpiomask = UNSET;
104 static unsigned int audioall = UNSET;
105 static unsigned int audiomux[5] = { [ 0 ... 4 ] = UNSET };
108 module_param(triton1, int, 0444);
109 module_param(vsfx, int, 0444);
110 module_param(no_overlay, int, 0444);
111 module_param(latency, int, 0444);
112 module_param(gpiomask, int, 0444);
113 module_param(audioall, int, 0444);
114 module_param(autoload, int, 0444);
116 module_param_array(card, int, NULL, 0444);
117 module_param_array(pll, int, NULL, 0444);
118 module_param_array(tuner, int, NULL, 0444);
119 module_param_array(svhs, int, NULL, 0444);
120 module_param_array(remote, int, NULL, 0444);
121 module_param_array(audiodev, int, NULL, 0444);
122 module_param_array(audiomux, int, NULL, 0444);
124 MODULE_PARM_DESC(triton1,"set ETBF pci config bit "
125 "[enable bug compatibility for triton1 + others]");
126 MODULE_PARM_DESC(vsfx,"set VSFX pci config bit "
127 "[yet another chipset flaw workaround]");
128 MODULE_PARM_DESC(latency,"pci latency timer");
129 MODULE_PARM_DESC(card,"specify TV/grabber card model, see CARDLIST file for a list");
130 MODULE_PARM_DESC(pll,"specify installed crystal (0=none, 28=28 MHz, 35=35 MHz)");
131 MODULE_PARM_DESC(tuner,"specify installed tuner type");
132 MODULE_PARM_DESC(autoload, "obsolete option, please do not use anymore");
133 MODULE_PARM_DESC(audiodev, "specify audio device:\n"
134 "\t\t-1 = no audio\n"
135 "\t\t 0 = autodetect (default)\n"
139 MODULE_PARM_DESC(saa6588, "if 1, then load the saa6588 RDS module, default (0) is to use the card definition.");
140 MODULE_PARM_DESC(no_overlay,"allow override overlay default (0 disables, 1 enables)"
141 " [some VIA/SIS chipsets are known to have problem with overlay]");
143 /* ----------------------------------------------------------------------- */
144 /* list of card IDs for bt878+ cards */
150 } cards[] __devinitdata = {
151 { 0x13eb0070, BTTV_BOARD_HAUPPAUGE878, "Hauppauge WinTV" },
152 { 0x39000070, BTTV_BOARD_HAUPPAUGE878, "Hauppauge WinTV-D" },
153 { 0x45000070, BTTV_BOARD_HAUPPAUGEPVR, "Hauppauge WinTV/PVR" },
154 { 0xff000070, BTTV_BOARD_OSPREY1x0, "Osprey-100" },
155 { 0xff010070, BTTV_BOARD_OSPREY2x0_SVID,"Osprey-200" },
156 { 0xff020070, BTTV_BOARD_OSPREY500, "Osprey-500" },
157 { 0xff030070, BTTV_BOARD_OSPREY2000, "Osprey-2000" },
158 { 0xff040070, BTTV_BOARD_OSPREY540, "Osprey-540" },
159 { 0xff070070, BTTV_BOARD_OSPREY440, "Osprey-440" },
161 { 0x00011002, BTTV_BOARD_ATI_TVWONDER, "ATI TV Wonder" },
162 { 0x00031002, BTTV_BOARD_ATI_TVWONDERVE,"ATI TV Wonder/VE" },
164 { 0x6606107d, BTTV_BOARD_WINFAST2000, "Leadtek WinFast TV 2000" },
165 { 0x6607107d, BTTV_BOARD_WINFASTVC100, "Leadtek WinFast VC 100" },
166 { 0x6609107d, BTTV_BOARD_WINFAST2000, "Leadtek TV 2000 XP" },
167 { 0x263610b4, BTTV_BOARD_STB2, "STB TV PCI FM, Gateway P/N 6000704" },
168 { 0x264510b4, BTTV_BOARD_STB2, "STB TV PCI FM, Gateway P/N 6000704" },
169 { 0x402010fc, BTTV_BOARD_GVBCTV3PCI, "I-O Data Co. GV-BCTV3/PCI" },
170 { 0x405010fc, BTTV_BOARD_GVBCTV4PCI, "I-O Data Co. GV-BCTV4/PCI" },
171 { 0x407010fc, BTTV_BOARD_GVBCTV5PCI, "I-O Data Co. GV-BCTV5/PCI" },
172 { 0xd01810fc, BTTV_BOARD_GVBCTV5PCI, "I-O Data Co. GV-BCTV5/PCI" },
174 { 0x001211bd, BTTV_BOARD_PINNACLE, "Pinnacle PCTV" },
175 /* some cards ship with byteswapped IDs ... */
176 { 0x1200bd11, BTTV_BOARD_PINNACLE, "Pinnacle PCTV [bswap]" },
177 { 0xff00bd11, BTTV_BOARD_PINNACLE, "Pinnacle PCTV [bswap]" },
178 /* this seems to happen as well ... */
179 { 0xff1211bd, BTTV_BOARD_PINNACLE, "Pinnacle PCTV" },
181 { 0x3000121a, BTTV_BOARD_VOODOOTV_200, "3Dfx VoodooTV 200" },
182 { 0x263710b4, BTTV_BOARD_VOODOOTV_FM, "3Dfx VoodooTV FM" },
183 { 0x3060121a, BTTV_BOARD_STB2, "3Dfx VoodooTV 100/ STB OEM" },
185 { 0x3000144f, BTTV_BOARD_MAGICTVIEW063, "(Askey Magic/others) TView99 CPH06x" },
186 { 0xa005144f, BTTV_BOARD_MAGICTVIEW063, "CPH06X TView99-Card" },
187 { 0x3002144f, BTTV_BOARD_MAGICTVIEW061, "(Askey Magic/others) TView99 CPH05x" },
188 { 0x3005144f, BTTV_BOARD_MAGICTVIEW061, "(Askey Magic/others) TView99 CPH061/06L (T1/LC)" },
189 { 0x5000144f, BTTV_BOARD_MAGICTVIEW061, "Askey CPH050" },
190 { 0x300014ff, BTTV_BOARD_MAGICTVIEW061, "TView 99 (CPH061)" },
191 { 0x300214ff, BTTV_BOARD_PHOEBE_TVMAS, "Phoebe TV Master (CPH060)" },
193 { 0x00011461, BTTV_BOARD_AVPHONE98, "AVerMedia TVPhone98" },
194 { 0x00021461, BTTV_BOARD_AVERMEDIA98, "AVermedia TVCapture 98" },
195 { 0x00031461, BTTV_BOARD_AVPHONE98, "AVerMedia TVPhone98" },
196 { 0x00041461, BTTV_BOARD_AVERMEDIA98, "AVerMedia TVCapture 98" },
197 { 0x03001461, BTTV_BOARD_AVERMEDIA98, "VDOMATE TV TUNER CARD" },
199 { 0x1117153b, BTTV_BOARD_TERRATVALUE, "Terratec TValue (Philips PAL B/G)" },
200 { 0x1118153b, BTTV_BOARD_TERRATVALUE, "Terratec TValue (Temic PAL B/G)" },
201 { 0x1119153b, BTTV_BOARD_TERRATVALUE, "Terratec TValue (Philips PAL I)" },
202 { 0x111a153b, BTTV_BOARD_TERRATVALUE, "Terratec TValue (Temic PAL I)" },
204 { 0x1123153b, BTTV_BOARD_TERRATVRADIO, "Terratec TV Radio+" },
205 { 0x1127153b, BTTV_BOARD_TERRATV, "Terratec TV+ (V1.05)" },
206 /* clashes with FlyVideo
207 *{ 0x18521852, BTTV_BOARD_TERRATV, "Terratec TV+ (V1.10)" }, */
208 { 0x1134153b, BTTV_BOARD_TERRATVALUE, "Terratec TValue (LR102)" },
209 { 0x1135153b, BTTV_BOARD_TERRATVALUER, "Terratec TValue Radio" }, /* LR102 */
210 { 0x5018153b, BTTV_BOARD_TERRATVALUE, "Terratec TValue" }, /* ?? */
211 { 0xff3b153b, BTTV_BOARD_TERRATVALUER, "Terratec TValue Radio" }, /* ?? */
213 { 0x400015b0, BTTV_BOARD_ZOLTRIX_GENIE, "Zoltrix Genie TV" },
214 { 0x400a15b0, BTTV_BOARD_ZOLTRIX_GENIE, "Zoltrix Genie TV" },
215 { 0x400d15b0, BTTV_BOARD_ZOLTRIX_GENIE, "Zoltrix Genie TV / Radio" },
216 { 0x401015b0, BTTV_BOARD_ZOLTRIX_GENIE, "Zoltrix Genie TV / Radio" },
217 { 0x401615b0, BTTV_BOARD_ZOLTRIX_GENIE, "Zoltrix Genie TV / Radio" },
219 { 0x1430aa00, BTTV_BOARD_PV143, "Provideo PV143A" },
220 { 0x1431aa00, BTTV_BOARD_PV143, "Provideo PV143B" },
221 { 0x1432aa00, BTTV_BOARD_PV143, "Provideo PV143C" },
222 { 0x1433aa00, BTTV_BOARD_PV143, "Provideo PV143D" },
223 { 0x1433aa03, BTTV_BOARD_PV143, "Security Eyes" },
225 { 0x1460aa00, BTTV_BOARD_PV150, "Provideo PV150A-1" },
226 { 0x1461aa01, BTTV_BOARD_PV150, "Provideo PV150A-2" },
227 { 0x1462aa02, BTTV_BOARD_PV150, "Provideo PV150A-3" },
228 { 0x1463aa03, BTTV_BOARD_PV150, "Provideo PV150A-4" },
230 { 0x1464aa04, BTTV_BOARD_PV150, "Provideo PV150B-1" },
231 { 0x1465aa05, BTTV_BOARD_PV150, "Provideo PV150B-2" },
232 { 0x1466aa06, BTTV_BOARD_PV150, "Provideo PV150B-3" },
233 { 0x1467aa07, BTTV_BOARD_PV150, "Provideo PV150B-4" },
235 { 0xa132ff00, BTTV_BOARD_IVC100, "IVC-100" },
236 { 0xa1550000, BTTV_BOARD_IVC200, "IVC-200" },
237 { 0xa1550001, BTTV_BOARD_IVC200, "IVC-200" },
238 { 0xa1550002, BTTV_BOARD_IVC200, "IVC-200" },
239 { 0xa1550003, BTTV_BOARD_IVC200, "IVC-200" },
240 { 0xa1550100, BTTV_BOARD_IVC200, "IVC-200G" },
241 { 0xa1550101, BTTV_BOARD_IVC200, "IVC-200G" },
242 { 0xa1550102, BTTV_BOARD_IVC200, "IVC-200G" },
243 { 0xa1550103, BTTV_BOARD_IVC200, "IVC-200G" },
244 { 0xa182ff00, BTTV_BOARD_IVC120, "IVC-120G" },
245 { 0xa182ff01, BTTV_BOARD_IVC120, "IVC-120G" },
246 { 0xa182ff02, BTTV_BOARD_IVC120, "IVC-120G" },
247 { 0xa182ff03, BTTV_BOARD_IVC120, "IVC-120G" },
248 { 0xa182ff04, BTTV_BOARD_IVC120, "IVC-120G" },
249 { 0xa182ff05, BTTV_BOARD_IVC120, "IVC-120G" },
250 { 0xa182ff06, BTTV_BOARD_IVC120, "IVC-120G" },
251 { 0xa182ff07, BTTV_BOARD_IVC120, "IVC-120G" },
252 { 0xa182ff08, BTTV_BOARD_IVC120, "IVC-120G" },
253 { 0xa182ff09, BTTV_BOARD_IVC120, "IVC-120G" },
254 { 0xa182ff0a, BTTV_BOARD_IVC120, "IVC-120G" },
255 { 0xa182ff0b, BTTV_BOARD_IVC120, "IVC-120G" },
256 { 0xa182ff0c, BTTV_BOARD_IVC120, "IVC-120G" },
257 { 0xa182ff0d, BTTV_BOARD_IVC120, "IVC-120G" },
258 { 0xa182ff0e, BTTV_BOARD_IVC120, "IVC-120G" },
259 { 0xa182ff0f, BTTV_BOARD_IVC120, "IVC-120G" },
260 { 0xf0500000, BTTV_BOARD_IVCE8784, "IVCE-8784" },
261 { 0xf0500001, BTTV_BOARD_IVCE8784, "IVCE-8784" },
262 { 0xf0500002, BTTV_BOARD_IVCE8784, "IVCE-8784" },
263 { 0xf0500003, BTTV_BOARD_IVCE8784, "IVCE-8784" },
265 { 0x41424344, BTTV_BOARD_GRANDTEC, "GrandTec Multi Capture" },
266 { 0x01020304, BTTV_BOARD_XGUARD, "Grandtec Grand X-Guard" },
268 { 0x18501851, BTTV_BOARD_CHRONOS_VS2, "FlyVideo 98 (LR50)/ Chronos Video Shuttle II" },
269 { 0xa0501851, BTTV_BOARD_CHRONOS_VS2, "FlyVideo 98 (LR50)/ Chronos Video Shuttle II" },
270 { 0x18511851, BTTV_BOARD_FLYVIDEO98EZ, "FlyVideo 98EZ (LR51)/ CyberMail AV" },
271 { 0x18521852, BTTV_BOARD_TYPHOON_TVIEW, "FlyVideo 98FM (LR50)/ Typhoon TView TV/FM Tuner" },
272 { 0x41a0a051, BTTV_BOARD_FLYVIDEO_98FM, "Lifeview FlyVideo 98 LR50 Rev Q" },
273 { 0x18501f7f, BTTV_BOARD_FLYVIDEO_98, "Lifeview Flyvideo 98" },
275 { 0x010115cb, BTTV_BOARD_GMV1, "AG GMV1" },
276 { 0x010114c7, BTTV_BOARD_MODTEC_205, "Modular Technology MM201/MM202/MM205/MM210/MM215 PCTV" },
278 { 0x10b42636, BTTV_BOARD_HAUPPAUGE878, "STB ???" },
279 { 0x217d6606, BTTV_BOARD_WINFAST2000, "Leadtek WinFast TV 2000" },
280 { 0xfff6f6ff, BTTV_BOARD_WINFAST2000, "Leadtek WinFast TV 2000" },
281 { 0x03116000, BTTV_BOARD_SENSORAY311, "Sensoray 311" },
282 { 0x00790e11, BTTV_BOARD_WINDVR, "Canopus WinDVR PCI" },
283 { 0xa0fca1a0, BTTV_BOARD_ZOLTRIX, "Face to Face Tvmax" },
284 { 0x82b2aa6a, BTTV_BOARD_SIMUS_GVC1100, "SIMUS GVC1100" },
285 { 0x146caa0c, BTTV_BOARD_PV951, "ituner spectra8" },
286 { 0x200a1295, BTTV_BOARD_PXC200, "ImageNation PXC200A" },
288 { 0x40111554, BTTV_BOARD_PV_BT878P_9B, "Prolink Pixelview PV-BT" },
289 { 0x17de0a01, BTTV_BOARD_KWORLD, "Mecer TV/FM/Video Tuner" },
291 { 0x01051805, BTTV_BOARD_PICOLO_TETRA_CHIP, "Picolo Tetra Chip #1" },
292 { 0x01061805, BTTV_BOARD_PICOLO_TETRA_CHIP, "Picolo Tetra Chip #2" },
293 { 0x01071805, BTTV_BOARD_PICOLO_TETRA_CHIP, "Picolo Tetra Chip #3" },
294 { 0x01081805, BTTV_BOARD_PICOLO_TETRA_CHIP, "Picolo Tetra Chip #4" },
296 { 0x15409511, BTTV_BOARD_ACORP_Y878F, "Acorp Y878F" },
298 { 0x53534149, BTTV_BOARD_SSAI_SECURITY, "SSAI Security Video Interface" },
299 { 0x5353414a, BTTV_BOARD_SSAI_ULTRASOUND, "SSAI Ultrasound Video Interface" },
301 /* likely broken, vendor id doesn't match the other magic views ...
302 * { 0xa0fca04f, BTTV_BOARD_MAGICTVIEW063, "Guillemot Maxi TV Video 3" }, */
304 /* Duplicate PCI ID, reconfigure for this board during the eeprom read.
305 * { 0x13eb0070, BTTV_BOARD_HAUPPAUGE_IMPACTVCB, "Hauppauge ImpactVCB" }, */
307 { 0x109e036e, BTTV_BOARD_CONCEPTRONIC_CTVFMI2, "Conceptronic CTVFMi v2"},
309 /* DVB cards (using pci function .1 for mpeg data xfer) */
310 { 0x001c11bd, BTTV_BOARD_PINNACLESAT, "Pinnacle PCTV Sat" },
311 { 0x01010071, BTTV_BOARD_NEBULA_DIGITV, "Nebula Electronics DigiTV" },
312 { 0x20007063, BTTV_BOARD_PC_HDTV, "pcHDTV HD-2000 TV"},
313 { 0x002611bd, BTTV_BOARD_TWINHAN_DST, "Pinnacle PCTV SAT CI" },
314 { 0x00011822, BTTV_BOARD_TWINHAN_DST, "Twinhan VisionPlus DVB" },
315 { 0xfc00270f, BTTV_BOARD_TWINHAN_DST, "ChainTech digitop DST-1000 DVB-S" },
316 { 0x07711461, BTTV_BOARD_AVDVBT_771, "AVermedia AverTV DVB-T 771" },
317 { 0x07611461, BTTV_BOARD_AVDVBT_761, "AverMedia AverTV DVB-T 761" },
318 { 0xdb1018ac, BTTV_BOARD_DVICO_DVBT_LITE, "DViCO FusionHDTV DVB-T Lite" },
319 { 0xdb1118ac, BTTV_BOARD_DVICO_DVBT_LITE, "Ultraview DVB-T Lite" },
320 { 0xd50018ac, BTTV_BOARD_DVICO_FUSIONHDTV_5_LITE, "DViCO FusionHDTV 5 Lite" },
321 { 0x00261822, BTTV_BOARD_TWINHAN_DST, "DNTV Live! Mini "},
322 { 0xd200dbc0, BTTV_BOARD_DVICO_FUSIONHDTV_2, "DViCO FusionHDTV 2" },
323 { 0x763c008a, BTTV_BOARD_GEOVISION_GV600, "GeoVision GV-600" },
324 { 0x18011000, BTTV_BOARD_ENLTV_FM_2, "Encore ENL TV-FM-2" },
325 { 0x763d800a, BTTV_BOARD_GEOVISION_GV800S, "GeoVision GV-800(S) (master)" },
326 { 0x763d800b, BTTV_BOARD_GEOVISION_GV800S_SL, "GeoVision GV-800(S) (slave)" },
327 { 0x763d800c, BTTV_BOARD_GEOVISION_GV800S_SL, "GeoVision GV-800(S) (slave)" },
328 { 0x763d800d, BTTV_BOARD_GEOVISION_GV800S_SL, "GeoVision GV-800(S) (slave)" },
330 { 0x15401830, BTTV_BOARD_PV183, "Provideo PV183-1" },
331 { 0x15401831, BTTV_BOARD_PV183, "Provideo PV183-2" },
332 { 0x15401832, BTTV_BOARD_PV183, "Provideo PV183-3" },
333 { 0x15401833, BTTV_BOARD_PV183, "Provideo PV183-4" },
334 { 0x15401834, BTTV_BOARD_PV183, "Provideo PV183-5" },
335 { 0x15401835, BTTV_BOARD_PV183, "Provideo PV183-6" },
336 { 0x15401836, BTTV_BOARD_PV183, "Provideo PV183-7" },
337 { 0x15401837, BTTV_BOARD_PV183, "Provideo PV183-8" },
342 /* ----------------------------------------------------------------------- */
343 /* array with description for bt848 / bt878 tv/grabber cards */
345 struct tvcard bttv_tvcards[] = {
346 /* ---- card 0x00 ---------------------------------- */
347 [BTTV_BOARD_UNKNOWN] = {
348 .name = " *** UNKNOWN/GENERIC *** ",
351 .muxsel = MUXSEL(2, 3, 1, 0),
353 .tuner_addr = ADDR_UNSET,
355 [BTTV_BOARD_MIRO] = {
358 /* .audio_inputs= 1, */
361 .muxsel = MUXSEL(2, 3, 1, 1),
362 .gpiomux = { 2, 0, 0, 0 },
366 .tuner_addr = ADDR_UNSET,
368 [BTTV_BOARD_HAUPPAUGE] = {
369 .name = "Hauppauge (bt848)",
371 /* .audio_inputs= 1, */
374 .muxsel = MUXSEL(2, 3, 1, 1),
375 .gpiomux = { 0, 1, 2, 3 },
379 .tuner_addr = ADDR_UNSET,
382 .name = "STB, Gateway P/N 6000699 (bt848)",
384 /* .audio_inputs= 1, */
387 .muxsel = MUXSEL(2, 3, 1, 1),
388 .gpiomux = { 4, 0, 2, 3 },
392 .tuner_type = TUNER_PHILIPS_NTSC,
393 .tuner_addr = ADDR_UNSET,
398 /* ---- card 0x04 ---------------------------------- */
399 [BTTV_BOARD_INTEL] = {
400 .name = "Intel Create and Share PCI/ Smart Video Recorder III",
402 /* .audio_inputs= 0, */
405 .muxsel = MUXSEL(2, 3, 1, 1),
408 .tuner_type = TUNER_ABSENT,
409 .tuner_addr = ADDR_UNSET,
411 [BTTV_BOARD_DIAMOND] = {
412 .name = "Diamond DTV2000",
414 /* .audio_inputs= 1, */
417 .muxsel = MUXSEL(2, 3, 1, 0),
418 .gpiomux = { 0, 1, 0, 1 },
422 .tuner_addr = ADDR_UNSET,
424 [BTTV_BOARD_AVERMEDIA] = {
425 .name = "AVerMedia TVPhone",
427 /* .audio_inputs= 1, */
429 .muxsel = MUXSEL(2, 3, 1, 1),
431 .gpiomux = { 0x0c, 0x04, 0x08, 0x04 },
432 /* 0x04 for some cards ?? */
435 .tuner_addr = ADDR_UNSET,
436 .audio_mode_gpio= avermedia_tvphone_audio,
439 [BTTV_BOARD_MATRIX_VISION] = {
440 .name = "MATRIX-Vision MV-Delta",
442 /* .audio_inputs= 1, */
445 .muxsel = MUXSEL(2, 3, 1, 0, 0),
448 .tuner_type = TUNER_ABSENT,
449 .tuner_addr = ADDR_UNSET,
452 /* ---- card 0x08 ---------------------------------- */
453 [BTTV_BOARD_FLYVIDEO] = {
454 .name = "Lifeview FlyVideo II (Bt848) LR26 / MAXI TV Video PCI2 LR26",
456 /* .audio_inputs= 1, */
459 .muxsel = MUXSEL(2, 3, 1, 1),
460 .gpiomux = { 0, 0xc00, 0x800, 0x400 },
465 .tuner_addr = ADDR_UNSET,
467 [BTTV_BOARD_TURBOTV] = {
468 .name = "IMS/IXmicro TurboTV",
470 /* .audio_inputs= 1, */
473 .muxsel = MUXSEL(2, 3, 1, 1),
474 .gpiomux = { 1, 1, 2, 3 },
477 .tuner_type = TUNER_TEMIC_PAL,
478 .tuner_addr = ADDR_UNSET,
480 [BTTV_BOARD_HAUPPAUGE878] = {
481 .name = "Hauppauge (bt878)",
483 /* .audio_inputs= 1, */
485 .gpiomask = 0x0f, /* old: 7 */
486 .muxsel = MUXSEL(2, 0, 1, 1),
487 .gpiomux = { 0, 1, 2, 3 },
492 .tuner_addr = ADDR_UNSET,
494 [BTTV_BOARD_MIROPRO] = {
495 .name = "MIRO PCTV pro",
497 /* .audio_inputs= 1, */
500 .muxsel = MUXSEL(2, 3, 1, 1),
501 .gpiomux = { 0x20001,0x10001, 0, 0 },
505 .tuner_addr = ADDR_UNSET,
508 /* ---- card 0x0c ---------------------------------- */
509 [BTTV_BOARD_ADSTECH_TV] = {
510 .name = "ADS Technologies Channel Surfer TV (bt848)",
512 /* .audio_inputs= 1, */
515 .muxsel = MUXSEL(2, 3, 1, 1),
516 .gpiomux = { 13, 14, 11, 7 },
519 .tuner_addr = ADDR_UNSET,
521 [BTTV_BOARD_AVERMEDIA98] = {
522 .name = "AVerMedia TVCapture 98",
524 /* .audio_inputs= 4, */
527 .muxsel = MUXSEL(2, 3, 1, 1),
528 .gpiomux = { 13, 14, 11, 7 },
532 .tuner_type = TUNER_PHILIPS_PAL,
533 .tuner_addr = ADDR_UNSET,
534 .audio_mode_gpio= avermedia_tv_stereo_audio,
538 .name = "Aimslab Video Highway Xtreme (VHX)",
540 /* .audio_inputs= 1, */
543 .muxsel = MUXSEL(2, 3, 1, 1),
544 .gpiomux = { 0, 2, 1, 3 }, /* old: {0, 1, 2, 3, 4} */
549 .tuner_addr = ADDR_UNSET,
551 [BTTV_BOARD_ZOLTRIX] = {
552 .name = "Zoltrix TV-Max",
554 /* .audio_inputs= 1, */
557 .muxsel = MUXSEL(2, 3, 1, 1),
558 .gpiomux = { 0, 0, 1, 0 },
562 .tuner_addr = ADDR_UNSET,
565 /* ---- card 0x10 ---------------------------------- */
566 [BTTV_BOARD_PIXVIEWPLAYTV] = {
567 .name = "Prolink Pixelview PlayTV (bt878)",
569 /* .audio_inputs= 1, */
571 .gpiomask = 0x01fe00,
572 .muxsel = MUXSEL(2, 3, 1, 1),
573 /* 2003-10-20 by "Anton A. Arapov" <arapov@mail.ru> */
574 .gpiomux = { 0x001e00, 0, 0x018000, 0x014000 },
575 .gpiomute = 0x002000,
579 .tuner_addr = ADDR_UNSET,
581 [BTTV_BOARD_WINVIEW_601] = {
582 .name = "Leadtek WinView 601",
584 /* .audio_inputs= 1, */
586 .gpiomask = 0x8300f8,
587 .muxsel = MUXSEL(2, 3, 1, 1, 0),
588 .gpiomux = { 0x4fa007,0xcfa007,0xcfa007,0xcfa007 },
589 .gpiomute = 0xcfa007,
592 .tuner_addr = ADDR_UNSET,
593 .volume_gpio = winview_volume,
596 [BTTV_BOARD_AVEC_INTERCAP] = {
597 .name = "AVEC Intercapture",
599 /* .audio_inputs= 2, */
602 .muxsel = MUXSEL(2, 3, 1, 1),
603 .gpiomux = { 1, 0, 0, 0 },
606 .tuner_addr = ADDR_UNSET,
608 [BTTV_BOARD_LIFE_FLYKIT] = {
609 .name = "Lifeview FlyVideo II EZ /FlyKit LR38 Bt848 (capture only)",
611 /* .audio_inputs= 1, */
613 .gpiomask = 0x8dff00,
614 .muxsel = MUXSEL(2, 3, 1, 1),
617 .tuner_type = TUNER_ABSENT,
618 .tuner_addr = ADDR_UNSET,
621 /* ---- card 0x14 ---------------------------------- */
622 [BTTV_BOARD_CEI_RAFFLES] = {
623 .name = "CEI Raffles Card",
625 /* .audio_inputs= 3, */
627 .muxsel = MUXSEL(2, 3, 1, 1),
629 .tuner_addr = ADDR_UNSET,
631 [BTTV_BOARD_CONFERENCETV] = {
632 .name = "Lifeview FlyVideo 98/ Lucky Star Image World ConferenceTV LR50",
634 /* .audio_inputs= 2, tuner, line in */
637 .muxsel = MUXSEL(2, 3, 1, 1),
638 .gpiomux = { 0, 0x800, 0x1000, 0x1000 },
641 .tuner_type = TUNER_PHILIPS_PAL_I,
642 .tuner_addr = ADDR_UNSET,
644 [BTTV_BOARD_PHOEBE_TVMAS] = {
645 .name = "Askey CPH050/ Phoebe Tv Master + FM",
647 /* .audio_inputs= 1, */
650 .muxsel = MUXSEL(2, 3, 1, 1),
651 .gpiomux = { 0, 1, 0x800, 0x400 },
656 .tuner_addr = ADDR_UNSET,
658 [BTTV_BOARD_MODTEC_205] = {
659 .name = "Modular Technology MM201/MM202/MM205/MM210/MM215 PCTV, bt878",
661 /* .audio_inputs= 1, */
665 .muxsel = MUXSEL(2, 3, 0), /* input 2 is digital */
666 /* .digital_mode= DIGITAL_MODE_CAMERA, */
667 .gpiomux = { 0, 0, 0, 0 },
670 .tuner_type = TUNER_ALPS_TSBB5_PAL_I,
671 .tuner_addr = ADDR_UNSET,
674 /* ---- card 0x18 ---------------------------------- */
675 [BTTV_BOARD_MAGICTVIEW061] = {
676 .name = "Askey CPH05X/06X (bt878) [many vendors]",
678 /* .audio_inputs= 1, */
681 .muxsel = MUXSEL(2, 3, 1, 1),
682 .gpiomux = {0x400, 0x400, 0x400, 0x400 },
687 .tuner_addr = ADDR_UNSET,
690 [BTTV_BOARD_VOBIS_BOOSTAR] = {
691 .name = "Terratec TerraTV+ Version 1.0 (Bt848)/ Terra TValue Version 1.0/ Vobis TV-Boostar",
693 /* .audio_inputs= 1, */
695 .gpiomask = 0x1f0fff,
696 .muxsel = MUXSEL(2, 3, 1, 1),
697 .gpiomux = { 0x20000, 0x30000, 0x10000, 0 },
700 .tuner_type = TUNER_PHILIPS_PAL,
701 .tuner_addr = ADDR_UNSET,
702 .audio_mode_gpio= terratv_audio,
704 [BTTV_BOARD_HAUPPAUG_WCAM] = {
705 .name = "Hauppauge WinCam newer (bt878)",
707 /* .audio_inputs= 1, */
710 .muxsel = MUXSEL(2, 0, 1, 1),
711 .gpiomux = { 0, 1, 2, 3 },
715 .tuner_addr = ADDR_UNSET,
717 [BTTV_BOARD_MAXI] = {
718 .name = "Lifeview FlyVideo 98/ MAXI TV Video PCI2 LR50",
720 /* .audio_inputs= 2, */
723 .muxsel = MUXSEL(2, 3, 1, 1),
724 .gpiomux = { 0, 0x800, 0x1000, 0x1000 },
727 .tuner_type = TUNER_PHILIPS_SECAM,
728 .tuner_addr = ADDR_UNSET,
731 /* ---- card 0x1c ---------------------------------- */
732 [BTTV_BOARD_TERRATV] = {
733 .name = "Terratec TerraTV+ Version 1.1 (bt878)",
735 /* .audio_inputs= 1, */
737 .gpiomask = 0x1f0fff,
738 .muxsel = MUXSEL(2, 3, 1, 1),
739 .gpiomux = { 0x20000, 0x30000, 0x10000, 0x00000 },
742 .tuner_type = TUNER_PHILIPS_PAL,
743 .tuner_addr = ADDR_UNSET,
744 .audio_mode_gpio= terratv_audio,
746 External 20 pin connector (for Active Radio Upgrade board)
752 gpio05: om5610-stereo
756 gpio09+10: nIOR, nSEL ?? (bt878)
760 gpio16: u2-A0 (1st 4052bt)
763 gpio19: u4-A0 (2nd 4052)
767 00000 : Cdrom (internal audio input)
768 10000 : ext. Video audio input
777 [BTTV_BOARD_PXC200] = {
778 /* Jannik Fritsch <jannik@techfak.uni-bielefeld.de> */
779 .name = "Imagenation PXC200",
781 /* .audio_inputs= 1, */
782 .svhs = 1, /* was: 4 */
784 .muxsel = MUXSEL(2, 3, 1, 0, 0),
787 .tuner_type = TUNER_ABSENT,
788 .tuner_addr = ADDR_UNSET,
789 .muxsel_hook = PXC200_muxsel,
792 [BTTV_BOARD_FLYVIDEO_98] = {
793 .name = "Lifeview FlyVideo 98 LR50",
795 /* .audio_inputs= 1, */
797 .gpiomask = 0x1800, /* 0x8dfe00 */
798 .muxsel = MUXSEL(2, 3, 1, 1),
799 .gpiomux = { 0, 0x0800, 0x1000, 0x1000 },
803 .tuner_addr = ADDR_UNSET,
805 [BTTV_BOARD_IPROTV] = {
806 .name = "Formac iProTV, Formac ProTV I (bt848)",
808 /* .audio_inputs= 1, */
811 .muxsel = MUXSEL(2, 3, 1, 1),
812 .gpiomux = { 1, 0, 0, 0 },
814 .tuner_type = TUNER_PHILIPS_PAL,
815 .tuner_addr = ADDR_UNSET,
818 /* ---- card 0x20 ---------------------------------- */
819 [BTTV_BOARD_INTEL_C_S_PCI] = {
820 .name = "Intel Create and Share PCI/ Smart Video Recorder III",
822 /* .audio_inputs= 0, */
825 .muxsel = MUXSEL(2, 3, 1, 1),
828 .tuner_type = TUNER_ABSENT,
829 .tuner_addr = ADDR_UNSET,
831 [BTTV_BOARD_TERRATVALUE] = {
832 .name = "Terratec TerraTValue Version Bt878",
834 /* .audio_inputs= 1, */
836 .gpiomask = 0xffff00,
837 .muxsel = MUXSEL(2, 3, 1, 1),
838 .gpiomux = { 0x500, 0, 0x300, 0x900 },
842 .tuner_type = TUNER_PHILIPS_PAL,
843 .tuner_addr = ADDR_UNSET,
845 [BTTV_BOARD_WINFAST2000] = {
846 .name = "Leadtek WinFast 2000/ WinFast 2000 XP",
848 /* .audio_inputs= 1, */
850 /* TV, CVid, SVid, CVid over SVid connector */
851 .muxsel = MUXSEL(2, 3, 1, 1, 0),
852 /* Alexander Varakin <avarakin@hotmail.com> [stereo version] */
853 .gpiomask = 0xb33000,
854 .gpiomux = { 0x122000,0x1000,0x0000,0x620000 },
855 .gpiomute = 0x800000,
856 /* Audio Routing for "WinFast 2000 XP" (no tv stereo !)
857 gpio23 -- hef4052:nEnable (0x800000)
860 0x0000: external audio
864 Note: There exists another variant "Winfast 2000" with tv stereo !?
865 Note: eeprom only contains FF and pci subsystem id 107d:6606
870 .tuner_type = TUNER_PHILIPS_PAL, /* default for now, gpio reads BFFF06 for Pal bg+dk */
871 .tuner_addr = ADDR_UNSET,
872 .audio_mode_gpio= winfast2000_audio,
875 [BTTV_BOARD_CHRONOS_VS2] = {
876 .name = "Lifeview FlyVideo 98 LR50 / Chronos Video Shuttle II",
878 /* .audio_inputs= 3, */
881 .muxsel = MUXSEL(2, 3, 1, 1),
882 .gpiomux = { 0, 0x800, 0x1000, 0x1000 },
886 .tuner_addr = ADDR_UNSET,
889 /* ---- card 0x24 ---------------------------------- */
890 [BTTV_BOARD_TYPHOON_TVIEW] = {
891 .name = "Lifeview FlyVideo 98FM LR50 / Typhoon TView TV/FM Tuner",
893 /* .audio_inputs= 3, */
896 .muxsel = MUXSEL(2, 3, 1, 1),
897 .gpiomux = { 0, 0x800, 0x1000, 0x1000 },
901 .tuner_addr = ADDR_UNSET,
904 [BTTV_BOARD_PXELVWPLTVPRO] = {
905 .name = "Prolink PixelView PlayTV pro",
907 /* .audio_inputs= 1, */
910 .muxsel = MUXSEL(2, 3, 1, 1),
911 .gpiomux = { 0x21, 0x20, 0x24, 0x2c },
916 .tuner_addr = ADDR_UNSET,
918 [BTTV_BOARD_MAGICTVIEW063] = {
919 .name = "Askey CPH06X TView99",
921 /* .audio_inputs= 1, */
923 .gpiomask = 0x551e00,
924 .muxsel = MUXSEL(2, 3, 1, 0),
925 .gpiomux = { 0x551400, 0x551200, 0, 0 },
926 .gpiomute = 0x551c00,
929 .tuner_type = TUNER_PHILIPS_PAL_I,
930 .tuner_addr = ADDR_UNSET,
933 [BTTV_BOARD_PINNACLE] = {
934 .name = "Pinnacle PCTV Studio/Rave",
936 /* .audio_inputs= 1, */
938 .gpiomask = 0x03000F,
939 .muxsel = MUXSEL(2, 3, 1, 1),
940 .gpiomux = { 2, 0xd0001, 0, 0 },
945 .tuner_addr = ADDR_UNSET,
948 /* ---- card 0x28 ---------------------------------- */
949 [BTTV_BOARD_STB2] = {
950 .name = "STB TV PCI FM, Gateway P/N 6000704 (bt878), 3Dfx VoodooTV 100",
952 /* .audio_inputs= 1, */
955 .muxsel = MUXSEL(2, 3, 1, 1),
956 .gpiomux = { 4, 0, 2, 3 },
960 .tuner_type = TUNER_PHILIPS_NTSC,
961 .tuner_addr = ADDR_UNSET,
965 [BTTV_BOARD_AVPHONE98] = {
966 .name = "AVerMedia TVPhone 98",
968 /* .audio_inputs= 4, */
971 .muxsel = MUXSEL(2, 3, 1, 1),
972 .gpiomux = { 13, 4, 11, 7 },
976 .tuner_addr = ADDR_UNSET,
978 .audio_mode_gpio= avermedia_tvphone_audio,
980 [BTTV_BOARD_PV951] = {
981 .name = "ProVideo PV951", /* pic16c54 */
983 /* .audio_inputs= 1, */
986 .muxsel = MUXSEL(2, 3, 1, 1),
987 .gpiomux = { 0, 0, 0, 0},
991 .tuner_type = TUNER_PHILIPS_PAL_I,
992 .tuner_addr = ADDR_UNSET,
994 [BTTV_BOARD_ONAIR_TV] = {
995 .name = "Little OnAir TV",
997 /* .audio_inputs= 1, */
1000 .muxsel = MUXSEL(2, 3, 1, 1),
1001 .gpiomux = { 0xff9ff6, 0xff9ff6, 0xff1ff7, 0 },
1002 .gpiomute = 0xff3ffc,
1004 .tuner_type = UNSET,
1005 .tuner_addr = ADDR_UNSET,
1008 /* ---- card 0x2c ---------------------------------- */
1009 [BTTV_BOARD_SIGMA_TVII_FM] = {
1010 .name = "Sigma TVII-FM",
1012 /* .audio_inputs= 1, */
1015 .muxsel = MUXSEL(2, 3, 1, 1),
1016 .gpiomux = { 1, 1, 0, 2 },
1020 .tuner_type = UNSET,
1021 .tuner_addr = ADDR_UNSET,
1023 [BTTV_BOARD_MATRIX_VISION2] = {
1024 .name = "MATRIX-Vision MV-Delta 2",
1026 /* .audio_inputs= 1, */
1029 .muxsel = MUXSEL(2, 3, 1, 0, 0),
1033 .tuner_type = TUNER_ABSENT,
1034 .tuner_addr = ADDR_UNSET,
1036 [BTTV_BOARD_ZOLTRIX_GENIE] = {
1037 .name = "Zoltrix Genie TV/FM",
1039 /* .audio_inputs= 1, */
1041 .gpiomask = 0xbcf03f,
1042 .muxsel = MUXSEL(2, 3, 1, 1),
1043 .gpiomux = { 0xbc803f, 0xbc903f, 0xbcb03f, 0 },
1044 .gpiomute = 0xbcb03f,
1047 .tuner_type = TUNER_TEMIC_4039FR5_NTSC,
1048 .tuner_addr = ADDR_UNSET,
1050 [BTTV_BOARD_TERRATVRADIO] = {
1051 .name = "Terratec TV/Radio+",
1053 /* .audio_inputs= 1, */
1055 .gpiomask = 0x70000,
1056 .muxsel = MUXSEL(2, 3, 1, 1),
1057 .gpiomux = { 0x20000, 0x30000, 0x10000, 0 },
1058 .gpiomute = 0x40000,
1062 .tuner_type = TUNER_PHILIPS_PAL_I,
1063 .tuner_addr = ADDR_UNSET,
1067 /* ---- card 0x30 ---------------------------------- */
1068 [BTTV_BOARD_DYNALINK] = {
1069 .name = "Askey CPH03x/ Dynalink Magic TView",
1071 /* .audio_inputs= 1, */
1074 .muxsel = MUXSEL(2, 3, 1, 1),
1075 .gpiomux = {2,0,0,0 },
1079 .tuner_type = UNSET,
1080 .tuner_addr = ADDR_UNSET,
1082 [BTTV_BOARD_GVBCTV3PCI] = {
1083 .name = "IODATA GV-BCTV3/PCI",
1085 /* .audio_inputs= 1, */
1087 .gpiomask = 0x010f00,
1088 .muxsel = MUXSEL(2, 3, 0, 0),
1089 .gpiomux = {0x10000, 0, 0x10000, 0 },
1092 .tuner_type = TUNER_ALPS_TSHC6_NTSC,
1093 .tuner_addr = ADDR_UNSET,
1094 .audio_mode_gpio= gvbctv3pci_audio,
1096 [BTTV_BOARD_PXELVWPLTVPAK] = {
1097 .name = "Prolink PV-BT878P+4E / PixelView PlayTV PAK / Lenco MXTV-9578 CP",
1099 /* .audio_inputs= 1, */
1102 .gpiomask = 0xAA0000,
1103 .muxsel = MUXSEL(2, 3, 1, 1, 0), /* in 4 is digital */
1104 /* .digital_mode= DIGITAL_MODE_CAMERA, */
1105 .gpiomux = { 0x20000, 0, 0x80000, 0x80000 },
1106 .gpiomute = 0xa8000,
1109 .tuner_type = TUNER_PHILIPS_PAL_I,
1110 .tuner_addr = ADDR_UNSET,
1112 /* GPIO wiring: (different from Rev.4C !)
1113 GPIO17: U4.A0 (first hef4052bt)
1115 GPIO20: U5.A1 (second hef4052bt)
1117 GPIO22: BT832 Reset Line
1118 GPIO23: A5,A0, U5,nEN
1119 Note: At i2c=0x8a is a Bt832 chip, which changes to 0x88 after being reset via GPIO22
1122 [BTTV_BOARD_EAGLE] = {
1123 .name = "Eagle Wireless Capricorn2 (bt878A)",
1125 /* .audio_inputs= 1, */
1128 .muxsel = MUXSEL(2, 0, 1, 1),
1129 .gpiomux = { 0, 1, 2, 3 },
1132 .tuner_type = UNSET /* TUNER_ALPS_TMDH2_NTSC */,
1133 .tuner_addr = ADDR_UNSET,
1136 /* ---- card 0x34 ---------------------------------- */
1137 [BTTV_BOARD_PINNACLEPRO] = {
1138 /* David Härdeman <david@2gen.com> */
1139 .name = "Pinnacle PCTV Studio Pro",
1141 /* .audio_inputs= 1, */
1143 .gpiomask = 0x03000F,
1144 .muxsel = MUXSEL(2, 3, 1, 1),
1145 .gpiomux = { 1, 0xd0001, 0, 0 },
1147 /* sound path (5 sources):
1148 MUX1 (mask 0x03), Enable Pin 0x08 (0=enable, 1=disable)
1151 2= Mono TV sound from Tuner
1153 MUX2 (mask 0x30000):
1155 1= FM stereo Radio from Tuner */
1158 .tuner_type = UNSET,
1159 .tuner_addr = ADDR_UNSET,
1161 [BTTV_BOARD_TVIEW_RDS_FM] = {
1162 /* Claas Langbehn <claas@bigfoot.com>,
1163 Sven Grothklags <sven@upb.de> */
1164 .name = "Typhoon TView RDS + FM Stereo / KNC1 TV Station RDS",
1166 /* .audio_inputs= 3, */
1169 .muxsel = MUXSEL(2, 3, 1, 1),
1170 .gpiomux = { 0, 0, 0x10, 8 },
1174 .tuner_type = TUNER_PHILIPS_PAL,
1175 .tuner_addr = ADDR_UNSET,
1178 [BTTV_BOARD_LIFETEC_9415] = {
1179 /* Tim Röstermundt <rosterm@uni-muenster.de>
1180 in de.comp.os.unix.linux.hardware:
1181 options bttv card=0 pll=1 radio=1 gpiomask=0x18e0
1182 gpiomux =0x44c71f,0x44d71f,0,0x44d71f,0x44dfff
1183 options tuner type=5 */
1184 .name = "Lifeview FlyVideo 2000 /FlyVideo A2/ Lifetec LT 9415 TV [LR90]",
1186 /* .audio_inputs= 1, */
1189 .muxsel = MUXSEL(2, 3, 1, 1),
1190 .gpiomux = { 0x0000,0x0800,0x1000,0x1000 },
1192 /* For cards with tda9820/tda9821:
1193 0x0000: Tuner normal stereo
1194 0x0080: Tuner A2 SAP (second audio program = Zweikanalton)
1195 0x0880: Tuner A2 stereo */
1197 .tuner_type = UNSET,
1198 .tuner_addr = ADDR_UNSET,
1200 [BTTV_BOARD_BESTBUY_EASYTV] = {
1201 /* Miguel Angel Alvarez <maacruz@navegalia.com>
1202 old Easy TV BT848 version (model CPH031) */
1203 .name = "Askey CPH031/ BESTBUY Easy TV",
1205 /* .audio_inputs= 1, */
1208 .muxsel = MUXSEL(2, 3, 1, 0),
1209 .gpiomux = { 2, 0, 0, 0 },
1213 .tuner_type = TUNER_TEMIC_PAL,
1214 .tuner_addr = ADDR_UNSET,
1217 /* ---- card 0x38 ---------------------------------- */
1218 [BTTV_BOARD_FLYVIDEO_98FM] = {
1219 /* Gordon Heydon <gjheydon@bigfoot.com ('98) */
1220 .name = "Lifeview FlyVideo 98FM LR50",
1222 /* .audio_inputs= 3, */
1225 .muxsel = MUXSEL(2, 3, 1, 1),
1226 .gpiomux = { 0, 0x800, 0x1000, 0x1000 },
1229 .tuner_type = TUNER_PHILIPS_PAL,
1230 .tuner_addr = ADDR_UNSET,
1232 /* This is the ultimate cheapo capture card
1233 * just a BT848A on a small PCB!
1234 * Steve Hosgood <steve@equiinet.com> */
1235 [BTTV_BOARD_GRANDTEC] = {
1236 .name = "GrandTec 'Grand Video Capture' (Bt848)",
1238 /* .audio_inputs= 0, */
1241 .muxsel = MUXSEL(3, 1),
1246 .tuner_type = TUNER_ABSENT,
1247 .tuner_addr = ADDR_UNSET,
1249 [BTTV_BOARD_ASKEY_CPH060] = {
1250 /* Daniel Herrington <daniel.herrington@home.com> */
1251 .name = "Askey CPH060/ Phoebe TV Master Only (No FM)",
1253 /* .audio_inputs= 1, */
1256 .muxsel = MUXSEL(2, 3, 1, 1),
1257 .gpiomux = { 0x400, 0x400, 0x400, 0x400 },
1261 .tuner_type = TUNER_TEMIC_4036FY5_NTSC,
1262 .tuner_addr = ADDR_UNSET,
1264 [BTTV_BOARD_ASKEY_CPH03X] = {
1265 /* Matti Mottus <mottus@physic.ut.ee> */
1266 .name = "Askey CPH03x TV Capturer",
1268 /* .audio_inputs= 1, */
1270 .gpiomask = 0x03000F,
1271 .muxsel = MUXSEL(2, 3, 1, 0),
1272 .gpiomux = { 2, 0, 0, 0 },
1275 .tuner_type = TUNER_TEMIC_PAL,
1276 .tuner_addr = ADDR_UNSET,
1279 /* ---- card 0x3c ---------------------------------- */
1280 [BTTV_BOARD_MM100PCTV] = {
1281 /* Philip Blundell <philb@gnu.org> */
1282 .name = "Modular Technology MM100PCTV",
1284 /* .audio_inputs= 2, */
1287 .muxsel = MUXSEL(2, 3, 1, 1),
1288 .gpiomux = { 2, 0, 0, 1 },
1291 .tuner_type = TUNER_TEMIC_PAL,
1292 .tuner_addr = ADDR_UNSET,
1294 [BTTV_BOARD_GMV1] = {
1295 /* Adrian Cox <adrian@humboldt.co.uk */
1296 .name = "AG Electronics GMV1",
1298 /* .audio_inputs= 0, */
1301 .muxsel = MUXSEL(2, 2),
1306 .tuner_type = TUNER_ABSENT,
1307 .tuner_addr = ADDR_UNSET,
1309 [BTTV_BOARD_BESTBUY_EASYTV2] = {
1310 /* Miguel Angel Alvarez <maacruz@navegalia.com>
1311 new Easy TV BT878 version (model CPH061)
1312 special thanks to Informatica Mieres for providing the card */
1313 .name = "Askey CPH061/ BESTBUY Easy TV (bt878)",
1315 /* .audio_inputs= 2, */
1318 .muxsel = MUXSEL(2, 3, 1, 0),
1319 .gpiomux = { 1, 0, 4, 4 },
1323 .tuner_type = TUNER_PHILIPS_PAL,
1324 .tuner_addr = ADDR_UNSET,
1326 [BTTV_BOARD_ATI_TVWONDER] = {
1327 /* Lukas Gebauer <geby@volny.cz> */
1328 .name = "ATI TV-Wonder",
1330 /* .audio_inputs= 1, */
1333 .muxsel = MUXSEL(2, 3, 1, 0),
1334 .gpiomux = { 0xbffe, 0, 0xbfff, 0 },
1337 .tuner_type = TUNER_TEMIC_4006FN5_MULTI_PAL,
1338 .tuner_addr = ADDR_UNSET,
1341 /* ---- card 0x40 ---------------------------------- */
1342 [BTTV_BOARD_ATI_TVWONDERVE] = {
1343 /* Lukas Gebauer <geby@volny.cz> */
1344 .name = "ATI TV-Wonder VE",
1346 /* .audio_inputs= 1, */
1349 .muxsel = MUXSEL(2, 3, 0, 1),
1350 .gpiomux = { 0, 0, 1, 0 },
1353 .tuner_type = TUNER_TEMIC_4006FN5_MULTI_PAL,
1354 .tuner_addr = ADDR_UNSET,
1356 [BTTV_BOARD_FLYVIDEO2000] = {
1357 /* DeeJay <deejay@westel900.net (2000S) */
1358 .name = "Lifeview FlyVideo 2000S LR90",
1360 /* .audio_inputs= 3, */
1363 .muxsel = MUXSEL(2, 3, 0, 1),
1364 /* Radio changed from 1e80 to 0x800 to make
1365 FlyVideo2000S in .hu happy (gm)*/
1366 /* -dk-???: set mute=0x1800 for tda9874h daughterboard */
1367 .gpiomux = { 0x0000,0x0800,0x1000,0x1000 },
1369 .audio_mode_gpio= fv2000s_audio,
1374 .tuner_type = TUNER_PHILIPS_PAL,
1375 .tuner_addr = ADDR_UNSET,
1377 [BTTV_BOARD_TERRATVALUER] = {
1378 .name = "Terratec TValueRadio",
1380 /* .audio_inputs= 1, */
1382 .gpiomask = 0xffff00,
1383 .muxsel = MUXSEL(2, 3, 1, 1),
1384 .gpiomux = { 0x500, 0x500, 0x300, 0x900 },
1388 .tuner_type = TUNER_PHILIPS_PAL,
1389 .tuner_addr = ADDR_UNSET,
1392 [BTTV_BOARD_GVBCTV4PCI] = {
1393 /* TANAKA Kei <peg00625@nifty.com> */
1394 .name = "IODATA GV-BCTV4/PCI",
1396 /* .audio_inputs= 1, */
1398 .gpiomask = 0x010f00,
1399 .muxsel = MUXSEL(2, 3, 0, 0),
1400 .gpiomux = {0x10000, 0, 0x10000, 0 },
1403 .tuner_type = TUNER_SHARP_2U5JF5540_NTSC,
1404 .tuner_addr = ADDR_UNSET,
1405 .audio_mode_gpio= gvbctv3pci_audio,
1408 /* ---- card 0x44 ---------------------------------- */
1409 [BTTV_BOARD_VOODOOTV_FM] = {
1410 .name = "3Dfx VoodooTV FM (Euro)",
1411 /* try "insmod msp3400 simple=0" if you have
1412 * sound problems with this card. */
1414 /* .audio_inputs= 1, */
1416 .gpiomask = 0x4f8a00,
1417 /* 0x100000: 1=MSP enabled (0=disable again)
1418 * 0x010000: Connected to "S0" on tda9880 (0=Pal/BG, 1=NTSC) */
1419 .gpiomux = {0x947fff, 0x987fff,0x947fff,0x947fff },
1420 .gpiomute = 0x947fff,
1421 /* tvtuner, radio, external,internal, mute, stereo
1422 * tuner, Composit, SVid, Composit-on-Svid-adapter */
1423 .muxsel = MUXSEL(2, 3, 0, 1),
1424 .tuner_type = TUNER_MT2032,
1425 .tuner_addr = ADDR_UNSET,
1429 [BTTV_BOARD_VOODOOTV_200] = {
1430 .name = "VoodooTV 200 (USA)",
1431 /* try "insmod msp3400 simple=0" if you have
1432 * sound problems with this card. */
1434 /* .audio_inputs= 1, */
1436 .gpiomask = 0x4f8a00,
1437 /* 0x100000: 1=MSP enabled (0=disable again)
1438 * 0x010000: Connected to "S0" on tda9880 (0=Pal/BG, 1=NTSC) */
1439 .gpiomux = {0x947fff, 0x987fff,0x947fff,0x947fff },
1440 .gpiomute = 0x947fff,
1441 /* tvtuner, radio, external,internal, mute, stereo
1442 * tuner, Composit, SVid, Composit-on-Svid-adapter */
1443 .muxsel = MUXSEL(2, 3, 0, 1),
1444 .tuner_type = TUNER_MT2032,
1445 .tuner_addr = ADDR_UNSET,
1449 [BTTV_BOARD_AIMMS] = {
1450 /* Philip Blundell <pb@nexus.co.uk> */
1451 .name = "Active Imaging AIMMS",
1453 /* .audio_inputs= 0, */
1454 .tuner_type = TUNER_ABSENT,
1455 .tuner_addr = ADDR_UNSET,
1457 .muxsel = MUXSEL(2),
1460 [BTTV_BOARD_PV_BT878P_PLUS] = {
1461 /* Tomasz Pyra <hellfire@sedez.iq.pl> */
1462 .name = "Prolink Pixelview PV-BT878P+ (Rev.4C,8E)",
1464 /* .audio_inputs= 4, */
1467 .muxsel = MUXSEL(2, 3, 1, 1),
1468 .gpiomux = { 0, 0, 11, 7 }, /* TV and Radio with same GPIO ! */
1472 .tuner_type = TUNER_LG_PAL_I_FM,
1473 .tuner_addr = ADDR_UNSET,
1476 GPIO0: U4.A0 (hef4052bt)
1478 GPIO2: U4.A1 (second hef4052bt)
1479 GPIO3: U4.nEN, U5.A0, A5.nEN
1483 [BTTV_BOARD_FLYVIDEO98EZ] = {
1484 .name = "Lifeview FlyVideo 98EZ (capture only) LR51",
1486 /* .audio_inputs= 0, */
1488 /* AV1, AV2, SVHS, CVid adapter on SVHS */
1489 .muxsel = MUXSEL(2, 3, 1, 1),
1492 .tuner_type = TUNER_ABSENT,
1493 .tuner_addr = ADDR_UNSET,
1496 /* ---- card 0x48 ---------------------------------- */
1497 [BTTV_BOARD_PV_BT878P_9B] = {
1498 /* Dariusz Kowalewski <darekk@automex.pl> */
1499 .name = "Prolink Pixelview PV-BT878P+9B (PlayTV Pro rev.9B FM+NICAM)",
1501 /* .audio_inputs= 1, */
1504 .muxsel = MUXSEL(2, 3, 1, 1),
1505 .gpiomux = { 0x01, 0x00, 0x03, 0x03 },
1511 .tuner_type = TUNER_PHILIPS_PAL,
1512 .tuner_addr = ADDR_UNSET,
1513 .audio_mode_gpio= pvbt878p9b_audio, /* Note: not all cards have stereo */
1514 .has_radio = 1, /* Note: not all cards have radio */
1521 GPIO20,22,23: R30,R29,R28
1524 [BTTV_BOARD_SENSORAY311] = {
1525 /* Clay Kunz <ckunz@mail.arc.nasa.gov> */
1526 /* you must jumper JP5 for the card to work */
1527 .name = "Sensoray 311",
1529 /* .audio_inputs= 0, */
1532 .muxsel = MUXSEL(2, 3, 1, 0, 0),
1535 .tuner_type = TUNER_ABSENT,
1536 .tuner_addr = ADDR_UNSET,
1538 [BTTV_BOARD_RV605] = {
1539 /* Miguel Freitas <miguel@cetuc.puc-rio.br> */
1540 .name = "RemoteVision MX (RV605)",
1542 /* .audio_inputs= 0, */
1545 .gpiomask2 = 0x07ff,
1546 .muxsel = MUXSEL(3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3),
1549 .tuner_type = TUNER_ABSENT,
1550 .tuner_addr = ADDR_UNSET,
1551 .muxsel_hook = rv605_muxsel,
1553 [BTTV_BOARD_POWERCLR_MTV878] = {
1554 .name = "Powercolor MTV878/ MTV878R/ MTV878F",
1556 /* .audio_inputs= 2, */
1558 .gpiomask = 0x1C800F, /* Bit0-2: Audio select, 8-12:remote control 14:remote valid 15:remote reset */
1559 .muxsel = MUXSEL(2, 1, 1),
1560 .gpiomux = { 0, 1, 2, 2 },
1563 .tuner_type = TUNER_PHILIPS_PAL,
1564 .tuner_addr = ADDR_UNSET,
1569 /* ---- card 0x4c ---------------------------------- */
1570 [BTTV_BOARD_WINDVR] = {
1571 /* Masaki Suzuki <masaki@btree.org> */
1572 .name = "Canopus WinDVR PCI (COMPAQ Presario 3524JP, 5112JP)",
1574 /* .audio_inputs= 1, */
1576 .gpiomask = 0x140007,
1577 .muxsel = MUXSEL(2, 3, 1, 1),
1578 .gpiomux = { 0, 1, 2, 3 },
1580 .tuner_type = TUNER_PHILIPS_NTSC,
1581 .tuner_addr = ADDR_UNSET,
1582 .audio_mode_gpio= windvr_audio,
1584 [BTTV_BOARD_GRANDTEC_MULTI] = {
1585 .name = "GrandTec Multi Capture Card (Bt878)",
1587 /* .audio_inputs= 0, */
1590 .muxsel = MUXSEL(2, 3, 1, 0),
1595 .tuner_type = TUNER_ABSENT,
1596 .tuner_addr = ADDR_UNSET,
1598 [BTTV_BOARD_KWORLD] = {
1599 .name = "Jetway TV/Capture JW-TV878-FBK, Kworld KW-TV878RF",
1601 /* .audio_inputs= 3, */
1604 /* Tuner, SVid, SVHS, SVid to SVHS connector */
1605 .muxsel = MUXSEL(2, 3, 1, 1),
1606 .gpiomux = { 0, 0, 4, 4 },/* Yes, this tuner uses the same audio output for TV and FM radio!
1607 * This card lacks external Audio In, so we mute it on Ext. & Int.
1608 * The PCB can take a sbx1637/sbx1673, wiring unknown.
1609 * This card lacks PCI subsystem ID, sigh.
1610 * gpiomux =1: lower volume, 2+3: mute
1611 * btwincap uses 0x80000/0x80003
1617 .tuner_type = TUNER_PHILIPS_PAL,
1618 .tuner_addr = ADDR_UNSET,
1619 /* Samsung TCPA9095PC27A (BG+DK), philips compatible, w/FM, stereo and
1620 radio signal strength indicators work fine. */
1623 GPIO0,1: HEF4052 A0,A1
1624 GPIO2: HEF4052 nENABLE
1626 GPIO8-13: IRDC357 data0-5 (data6 n.c. ?) [chip not present on my card]
1630 ?? : mtu8b56ep microcontroller for IR (GPIO wiring unknown)*/
1632 [BTTV_BOARD_DSP_TCVIDEO] = {
1633 /* Arthur Tetzlaff-Deas, DSP Design Ltd <software@dspdesign.com> */
1634 .name = "DSP Design TCVIDEO",
1637 .muxsel = MUXSEL(2, 3, 1, 0),
1639 .tuner_type = UNSET,
1640 .tuner_addr = ADDR_UNSET,
1643 /* ---- card 0x50 ---------------------------------- */
1644 [BTTV_BOARD_HAUPPAUGEPVR] = {
1645 .name = "Hauppauge WinTV PVR",
1647 /* .audio_inputs= 1, */
1649 .muxsel = MUXSEL(2, 0, 1, 1),
1652 .tuner_type = UNSET,
1653 .tuner_addr = ADDR_UNSET,
1658 [BTTV_BOARD_GVBCTV5PCI] = {
1659 .name = "IODATA GV-BCTV5/PCI",
1661 /* .audio_inputs= 1, */
1663 .gpiomask = 0x0f0f80,
1664 .muxsel = MUXSEL(2, 3, 1, 0),
1665 .gpiomux = {0x030000, 0x010000, 0, 0 },
1666 .gpiomute = 0x020000,
1669 .tuner_type = TUNER_PHILIPS_NTSC_M,
1670 .tuner_addr = ADDR_UNSET,
1671 .audio_mode_gpio= gvbctv5pci_audio,
1674 [BTTV_BOARD_OSPREY1x0] = {
1675 .name = "Osprey 100/150 (878)", /* 0x1(2|3)-45C6-C1 */
1676 .video_inputs = 4, /* id-inputs-clock */
1677 /* .audio_inputs= 0, */
1679 .muxsel = MUXSEL(3, 2, 0, 1),
1681 .tuner_type = TUNER_ABSENT,
1682 .tuner_addr = ADDR_UNSET,
1687 [BTTV_BOARD_OSPREY1x0_848] = {
1688 .name = "Osprey 100/150 (848)", /* 0x04-54C0-C1 & older boards */
1690 /* .audio_inputs= 0, */
1692 .muxsel = MUXSEL(2, 3, 1),
1694 .tuner_type = TUNER_ABSENT,
1695 .tuner_addr = ADDR_UNSET,
1701 /* ---- card 0x54 ---------------------------------- */
1702 [BTTV_BOARD_OSPREY101_848] = {
1703 .name = "Osprey 101 (848)", /* 0x05-40C0-C1 */
1705 /* .audio_inputs= 0, */
1707 .muxsel = MUXSEL(3, 1),
1709 .tuner_type = TUNER_ABSENT,
1710 .tuner_addr = ADDR_UNSET,
1715 [BTTV_BOARD_OSPREY1x1] = {
1716 .name = "Osprey 101/151", /* 0x1(4|5)-0004-C4 */
1718 /* .audio_inputs= 0, */
1720 .muxsel = MUXSEL(0),
1722 .tuner_type = TUNER_ABSENT,
1723 .tuner_addr = ADDR_UNSET,
1728 [BTTV_BOARD_OSPREY1x1_SVID] = {
1729 .name = "Osprey 101/151 w/ svid", /* 0x(16|17|20)-00C4-C1 */
1731 /* .audio_inputs= 0, */
1733 .muxsel = MUXSEL(0, 1),
1735 .tuner_type = TUNER_ABSENT,
1736 .tuner_addr = ADDR_UNSET,
1741 [BTTV_BOARD_OSPREY2xx] = {
1742 .name = "Osprey 200/201/250/251", /* 0x1(8|9|E|F)-0004-C4 */
1744 /* .audio_inputs= 1, */
1746 .muxsel = MUXSEL(0),
1748 .tuner_type = TUNER_ABSENT,
1749 .tuner_addr = ADDR_UNSET,
1755 /* ---- card 0x58 ---------------------------------- */
1756 [BTTV_BOARD_OSPREY2x0_SVID] = {
1757 .name = "Osprey 200/250", /* 0x1(A|B)-00C4-C1 */
1759 /* .audio_inputs= 1, */
1761 .muxsel = MUXSEL(0, 1),
1763 .tuner_type = TUNER_ABSENT,
1764 .tuner_addr = ADDR_UNSET,
1769 [BTTV_BOARD_OSPREY2x0] = {
1770 .name = "Osprey 210/220/230", /* 0x1(A|B)-04C0-C1 */
1772 /* .audio_inputs= 1, */
1774 .muxsel = MUXSEL(2, 3),
1776 .tuner_type = TUNER_ABSENT,
1777 .tuner_addr = ADDR_UNSET,
1782 [BTTV_BOARD_OSPREY500] = {
1783 .name = "Osprey 500", /* 500 */
1785 /* .audio_inputs= 1, */
1787 .muxsel = MUXSEL(2, 3),
1789 .tuner_type = TUNER_ABSENT,
1790 .tuner_addr = ADDR_UNSET,
1795 [BTTV_BOARD_OSPREY540] = {
1796 .name = "Osprey 540", /* 540 */
1798 /* .audio_inputs= 1, */
1800 .tuner_type = TUNER_ABSENT,
1801 .tuner_addr = ADDR_UNSET,
1807 /* ---- card 0x5C ---------------------------------- */
1808 [BTTV_BOARD_OSPREY2000] = {
1809 .name = "Osprey 2000", /* 2000 */
1811 /* .audio_inputs= 1, */
1813 .muxsel = MUXSEL(2, 3),
1815 .tuner_type = TUNER_ABSENT,
1816 .tuner_addr = ADDR_UNSET,
1819 .no_tda7432 = 1, /* must avoid, conflicts with the bt860 */
1821 [BTTV_BOARD_IDS_EAGLE] = {
1822 /* M G Berberich <berberic@forwiss.uni-passau.de> */
1823 .name = "IDS Eagle",
1825 /* .audio_inputs= 0, */
1826 .tuner_type = TUNER_ABSENT,
1827 .tuner_addr = ADDR_UNSET,
1830 .muxsel = MUXSEL(2, 2, 2, 2),
1831 .muxsel_hook = eagle_muxsel,
1836 [BTTV_BOARD_PINNACLESAT] = {
1837 .name = "Pinnacle PCTV Sat",
1839 /* .audio_inputs= 0, */
1841 .tuner_type = TUNER_ABSENT,
1842 .tuner_addr = ADDR_UNSET,
1846 .muxsel = MUXSEL(3, 1),
1851 [BTTV_BOARD_FORMAC_PROTV] = {
1852 .name = "Formac ProTV II (bt878)",
1854 /* .audio_inputs= 1, */
1857 /* TV, Comp1, Composite over SVID con, SVID */
1858 .muxsel = MUXSEL(2, 3, 1, 1),
1859 .gpiomux = { 2, 2, 0, 0 },
1862 .tuner_type = TUNER_PHILIPS_PAL,
1863 .tuner_addr = ADDR_UNSET,
1865 GPIO=0x00,0x01,0x03: mute (?)
1866 0x02: both TV and radio (tuner: FM1216/I)
1867 The card has onboard audio connectors labeled "cdrom" and "board",
1868 not soldered here, though unknown wiring.
1869 Card lacks: external audio in, pci subsystem id.
1873 /* ---- card 0x60 ---------------------------------- */
1874 [BTTV_BOARD_MACHTV] = {
1877 /* .audio_inputs= 1, */
1880 .muxsel = MUXSEL(2, 3, 1, 1),
1881 .gpiomux = { 0, 1, 2, 3},
1884 .tuner_type = TUNER_PHILIPS_PAL,
1885 .tuner_addr = ADDR_UNSET,
1888 [BTTV_BOARD_EURESYS_PICOLO] = {
1889 .name = "Euresys Picolo",
1891 /* .audio_inputs= 0, */
1897 .muxsel = MUXSEL(2, 0, 1),
1899 .tuner_type = TUNER_ABSENT,
1900 .tuner_addr = ADDR_UNSET,
1902 [BTTV_BOARD_PV150] = {
1903 /* Luc Van Hoeylandt <luc@e-magic.be> */
1904 .name = "ProVideo PV150", /* 0x4f */
1906 /* .audio_inputs= 0, */
1909 .muxsel = MUXSEL(2, 3),
1914 .tuner_type = TUNER_ABSENT,
1915 .tuner_addr = ADDR_UNSET,
1917 [BTTV_BOARD_AD_TVK503] = {
1918 /* Hiroshi Takekawa <sian@big.or.jp> */
1919 /* This card lacks subsystem ID */
1920 .name = "AD-TVK503", /* 0x63 */
1922 /* .audio_inputs= 1, */
1924 .gpiomask = 0x001e8007,
1925 .muxsel = MUXSEL(2, 3, 1, 0),
1926 /* Tuner, Radio, external, internal, off, on */
1927 .gpiomux = { 0x08, 0x0f, 0x0a, 0x08 },
1932 .tuner_type = TUNER_PHILIPS_NTSC,
1933 .tuner_addr = ADDR_UNSET,
1934 .audio_mode_gpio= adtvk503_audio,
1937 /* ---- card 0x64 ---------------------------------- */
1938 [BTTV_BOARD_HERCULES_SM_TV] = {
1939 .name = "Hercules Smart TV Stereo",
1941 /* .audio_inputs= 1, */
1944 .muxsel = MUXSEL(2, 3, 1, 1),
1948 .tuner_type = TUNER_PHILIPS_PAL,
1949 .tuner_addr = ADDR_UNSET,
1951 - card lacks subsystem ID
1952 - stereo variant w/ daughter board with tda9874a @0xb0
1954 always from tda9874 independent of GPIO (?)
1955 external line in: unknown
1956 - Other chips: em78p156elp @ 0x96 (probably IR remote control)
1957 hef4053 (instead 4052) for unknown function
1960 [BTTV_BOARD_PACETV] = {
1961 .name = "Pace TV & Radio Card",
1963 /* .audio_inputs= 1, */
1965 /* Tuner, CVid, SVid, CVid over SVid connector */
1966 .muxsel = MUXSEL(2, 3, 1, 1),
1970 .tuner_type = TUNER_PHILIPS_PAL_I,
1971 .tuner_addr = ADDR_UNSET,
1974 /* Bt878, Bt832, FI1246 tuner; no pci subsystem id
1975 only internal line out: (4pin header) RGGL
1976 Radio must be decoded by msp3410d (not routed through)*/
1978 .digital_mode = DIGITAL_MODE_CAMERA, todo!
1981 [BTTV_BOARD_IVC200] = {
1982 /* Chris Willing <chris@vislab.usyd.edu.au> */
1985 /* .audio_inputs= 0, */
1986 .tuner_type = TUNER_ABSENT,
1987 .tuner_addr = ADDR_UNSET,
1990 .muxsel = MUXSEL(2),
1993 [BTTV_BOARD_IVCE8784] = {
1994 .name = "IVCE-8784",
1996 /* .audio_inputs= 0, */
1997 .tuner_type = TUNER_ABSENT,
1998 .tuner_addr = ADDR_UNSET,
2001 .muxsel = MUXSEL(2),
2004 [BTTV_BOARD_XGUARD] = {
2005 .name = "Grand X-Guard / Trust 814PCI",
2007 /* .audio_inputs= 0, */
2009 .tuner_type = TUNER_ABSENT,
2010 .tuner_addr = ADDR_UNSET,
2012 .muxsel = MUXSEL(2,2,2,2, 3,3,3,3, 1,1,1,1, 0,0,0,0),
2013 .muxsel_hook = xguard_muxsel,
2020 /* ---- card 0x68 ---------------------------------- */
2021 [BTTV_BOARD_NEBULA_DIGITV] = {
2022 .name = "Nebula Electronics DigiTV",
2025 .muxsel = MUXSEL(2, 3, 1, 0),
2030 .tuner_type = TUNER_ABSENT,
2031 .tuner_addr = ADDR_UNSET,
2037 [BTTV_BOARD_PV143] = {
2038 /* Jorge Boncompte - DTI2 <jorge@dti2.net> */
2039 .name = "ProVideo PV143",
2041 /* .audio_inputs= 0, */
2044 .muxsel = MUXSEL(2, 3, 1, 0),
2049 .tuner_type = TUNER_ABSENT,
2050 .tuner_addr = ADDR_UNSET,
2052 [BTTV_BOARD_VD009X1_VD011_MINIDIN] = {
2053 /* M.Klahr@phytec.de */
2054 .name = "PHYTEC VD-009-X1 VD-011 MiniDIN (bt878)",
2056 /* .audio_inputs= 0, */
2059 .muxsel = MUXSEL(2, 3, 1, 0),
2060 .gpiomux = { 0, 0, 0, 0 }, /* card has no audio */
2063 .tuner_type = TUNER_ABSENT,
2064 .tuner_addr = ADDR_UNSET,
2066 [BTTV_BOARD_VD009X1_VD011_COMBI] = {
2067 .name = "PHYTEC VD-009-X1 VD-011 Combi (bt878)",
2069 /* .audio_inputs= 0, */
2072 .muxsel = MUXSEL(2, 3, 1, 1),
2073 .gpiomux = { 0, 0, 0, 0 }, /* card has no audio */
2076 .tuner_type = TUNER_ABSENT,
2077 .tuner_addr = ADDR_UNSET,
2080 /* ---- card 0x6c ---------------------------------- */
2081 [BTTV_BOARD_VD009_MINIDIN] = {
2082 .name = "PHYTEC VD-009 MiniDIN (bt878)",
2084 /* .audio_inputs= 0, */
2087 .gpiomask2 = 0x03, /* used for external vodeo mux */
2088 .muxsel = MUXSEL(2, 2, 2, 2, 3, 3, 3, 3, 1, 0),
2089 .muxsel_hook = phytec_muxsel,
2090 .gpiomux = { 0, 0, 0, 0 }, /* card has no audio */
2093 .tuner_type = TUNER_ABSENT,
2094 .tuner_addr = ADDR_UNSET,
2096 [BTTV_BOARD_VD009_COMBI] = {
2097 .name = "PHYTEC VD-009 Combi (bt878)",
2099 /* .audio_inputs= 0, */
2102 .gpiomask2 = 0x03, /* used for external vodeo mux */
2103 .muxsel = MUXSEL(2, 2, 2, 2, 3, 3, 3, 3, 1, 1),
2104 .muxsel_hook = phytec_muxsel,
2105 .gpiomux = { 0, 0, 0, 0 }, /* card has no audio */
2108 .tuner_type = TUNER_ABSENT,
2109 .tuner_addr = ADDR_UNSET,
2111 [BTTV_BOARD_IVC100] = {
2114 /* .audio_inputs= 0, */
2115 .tuner_type = TUNER_ABSENT,
2116 .tuner_addr = ADDR_UNSET,
2119 .muxsel = MUXSEL(2, 3, 1, 0),
2122 [BTTV_BOARD_IVC120] = {
2123 /* IVC-120G - Alan Garfield <alan@fromorbit.com> */
2126 /* .audio_inputs= 0, */
2127 .tuner_type = TUNER_ABSENT,
2128 .tuner_addr = ADDR_UNSET,
2129 .svhs = NO_SVHS, /* card has no svhs */
2135 .muxsel = MUXSEL(0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0),
2136 .muxsel_hook = ivc120_muxsel,
2140 /* ---- card 0x70 ---------------------------------- */
2141 [BTTV_BOARD_PC_HDTV] = {
2142 .name = "pcHDTV HD-2000 TV",
2144 /* .audio_inputs= 1, */
2146 .muxsel = MUXSEL(2, 3, 1, 0),
2147 .tuner_type = TUNER_PHILIPS_FCV1236D,
2148 .tuner_addr = ADDR_UNSET,
2151 [BTTV_BOARD_TWINHAN_DST] = {
2152 .name = "Twinhan DST + clones",
2156 .tuner_type = TUNER_ABSENT,
2157 .tuner_addr = ADDR_UNSET,
2161 [BTTV_BOARD_WINFASTVC100] = {
2162 .name = "Winfast VC100",
2164 /* .audio_inputs= 0, */
2166 /* Vid In, SVid In, Vid over SVid in connector */
2167 .muxsel = MUXSEL(3, 1, 1, 3),
2171 .tuner_type = TUNER_ABSENT,
2172 .tuner_addr = ADDR_UNSET,
2175 [BTTV_BOARD_TEV560] = {
2176 .name = "Teppro TEV-560/InterVision IV-560",
2178 /* .audio_inputs= 1, */
2181 .muxsel = MUXSEL(2, 3, 1, 1),
2182 .gpiomux = { 1, 1, 1, 1 },
2184 .tuner_type = TUNER_PHILIPS_PAL,
2185 .tuner_addr = ADDR_UNSET,
2189 /* ---- card 0x74 ---------------------------------- */
2190 [BTTV_BOARD_SIMUS_GVC1100] = {
2191 .name = "SIMUS GVC1100",
2193 /* .audio_inputs= 0, */
2195 .tuner_type = TUNER_ABSENT,
2196 .tuner_addr = ADDR_UNSET,
2198 .muxsel = MUXSEL(2, 2, 2, 2),
2200 .muxsel_hook = gvc1100_muxsel,
2202 [BTTV_BOARD_NGSTV_PLUS] = {
2203 /* Carlos Silva r3pek@r3pek.homelinux.org || card 0x75 */
2204 .name = "NGS NGSTV+",
2207 .gpiomask = 0x008007,
2208 .muxsel = MUXSEL(2, 3, 0, 0),
2209 .gpiomux = { 0, 0, 0, 0 },
2210 .gpiomute = 0x000003,
2212 .tuner_type = TUNER_PHILIPS_PAL,
2213 .tuner_addr = ADDR_UNSET,
2216 [BTTV_BOARD_LMLBT4] = {
2217 /* http://linuxmedialabs.com */
2219 .video_inputs = 4, /* IN1,IN2,IN3,IN4 */
2220 /* .audio_inputs= 0, */
2222 .muxsel = MUXSEL(2, 3, 1, 0),
2227 .tuner_type = TUNER_ABSENT,
2228 .tuner_addr = ADDR_UNSET,
2230 [BTTV_BOARD_TEKRAM_M205] = {
2231 /* Helmroos Harri <harri.helmroos@pp.inet.fi> */
2232 .name = "Tekram M205 PRO",
2234 /* .audio_inputs= 1, */
2235 .tuner_type = TUNER_PHILIPS_PAL,
2236 .tuner_addr = ADDR_UNSET,
2240 .muxsel = MUXSEL(2, 3, 1),
2241 .gpiomux = { 0x68, 0x68, 0x61, 0x61 },
2245 /* ---- card 0x78 ---------------------------------- */
2246 [BTTV_BOARD_CONTVFMI] = {
2247 /* Javier Cendan Ares <jcendan@lycos.es> */
2248 /* bt878 TV + FM without subsystem ID */
2249 .name = "Conceptronic CONTVFMi",
2251 /* .audio_inputs= 1, */
2253 .gpiomask = 0x008007,
2254 .muxsel = MUXSEL(2, 3, 1, 1),
2255 .gpiomux = { 0, 1, 2, 2 },
2259 .tuner_type = TUNER_PHILIPS_PAL,
2260 .tuner_addr = ADDR_UNSET,
2264 [BTTV_BOARD_PICOLO_TETRA_CHIP] = {
2265 /*Eric DEBIEF <debief@telemsa.com>*/
2266 /*EURESYS Picolo Tetra : 4 Conexant Fusion 878A, no audio, video input set with analog multiplexers GPIO controled*/
2267 /* adds picolo_tetra_muxsel(), picolo_tetra_init(), the folowing declaration strucure, and #define BTTV_BOARD_PICOLO_TETRA_CHIP*/
2269 .name = "Euresys Picolo Tetra",
2271 /* .audio_inputs= 0, */
2274 .gpiomask2 = 0x3C<<16,/*Set the GPIO[18]->GPIO[21] as output pin.==> drive the video inputs through analog multiplexers*/
2278 /*878A input is always MUX0, see above.*/
2279 .muxsel = MUXSEL(2, 2, 2, 2),
2280 .gpiomux = { 0, 0, 0, 0 }, /* card has no audio */
2283 .muxsel_hook = picolo_tetra_muxsel,/*Required as it doesn't follow the classic input selection policy*/
2284 .tuner_type = TUNER_ABSENT,
2285 .tuner_addr = ADDR_UNSET,
2287 [BTTV_BOARD_SPIRIT_TV] = {
2288 /* Spirit TV Tuner from http://spiritmodems.com.au */
2289 /* Stafford Goodsell <surge@goliath.homeunix.org> */
2290 .name = "Spirit TV Tuner",
2292 /* .audio_inputs= 1, */
2294 .gpiomask = 0x0000000f,
2295 .muxsel = MUXSEL(2, 1, 1),
2296 .gpiomux = { 0x02, 0x00, 0x00, 0x00 },
2297 .tuner_type = TUNER_TEMIC_PAL,
2298 .tuner_addr = ADDR_UNSET,
2302 [BTTV_BOARD_AVDVBT_771] = {
2303 /* Wolfram Joost <wojo@frokaschwei.de> */
2304 .name = "AVerMedia AVerTV DVB-T 771",
2307 .tuner_type = TUNER_ABSENT,
2308 .tuner_addr = ADDR_UNSET,
2309 .muxsel = MUXSEL(3, 3),
2318 /* ---- card 0x7c ---------------------------------- */
2319 [BTTV_BOARD_AVDVBT_761] = {
2320 /* Matt Jesson <dvb@jesson.eclipse.co.uk> */
2321 /* Based on the Nebula card data - added remote and new card number - BTTV_BOARD_AVDVBT_761, see also ir-kbd-gpio.c */
2322 .name = "AverMedia AverTV DVB-T 761",
2325 .muxsel = MUXSEL(3, 1, 2, 0), /* Comp0, S-Video, ?, ? */
2330 .tuner_type = TUNER_ABSENT,
2331 .tuner_addr = ADDR_UNSET,
2336 [BTTV_BOARD_MATRIX_VISIONSQ] = {
2337 /* andre.schwarz@matrix-vision.de */
2338 .name = "MATRIX Vision Sigma-SQ",
2340 /* .audio_inputs= 0, */
2343 .muxsel = MUXSEL(2, 2, 2, 2, 2, 2, 2, 2, 3, 3, 3, 3, 3, 3, 3, 3),
2344 .muxsel_hook = sigmaSQ_muxsel,
2348 .tuner_type = TUNER_ABSENT,
2349 .tuner_addr = ADDR_UNSET,
2351 [BTTV_BOARD_MATRIX_VISIONSLC] = {
2352 /* andre.schwarz@matrix-vision.de */
2353 .name = "MATRIX Vision Sigma-SLC",
2355 /* .audio_inputs= 0, */
2358 .muxsel = MUXSEL(2, 2, 2, 2),
2359 .muxsel_hook = sigmaSLC_muxsel,
2363 .tuner_type = TUNER_ABSENT,
2364 .tuner_addr = ADDR_UNSET,
2366 /* BTTV_BOARD_APAC_VIEWCOMP */
2367 [BTTV_BOARD_APAC_VIEWCOMP] = {
2368 /* Attila Kondoros <attila.kondoros@chello.hu> */
2369 /* bt878 TV + FM 0x00000000 subsystem ID */
2370 .name = "APAC Viewcomp 878(AMAX)",
2372 /* .audio_inputs= 1, */
2375 .muxsel = MUXSEL(2, 3, 1, 1),
2376 .gpiomux = { 2, 0, 0, 0 },
2380 .tuner_type = TUNER_PHILIPS_PAL,
2381 .tuner_addr = ADDR_UNSET,
2382 .has_remote = 1, /* miniremote works, see ir-kbd-gpio.c */
2383 .has_radio = 1, /* not every card has radio */
2386 /* ---- card 0x80 ---------------------------------- */
2387 [BTTV_BOARD_DVICO_DVBT_LITE] = {
2388 /* Chris Pascoe <c.pascoe@itee.uq.edu.au> */
2389 .name = "DViCO FusionHDTV DVB-T Lite",
2396 .tuner_type = TUNER_ABSENT,
2397 .tuner_addr = ADDR_UNSET,
2399 [BTTV_BOARD_VGEAR_MYVCD] = {
2400 /* Steven <photon38@pchome.com.tw> */
2401 .name = "V-Gear MyVCD",
2403 /* .audio_inputs= 1, */
2406 .muxsel = MUXSEL(2, 3, 1, 0),
2407 .gpiomux = {0x31, 0x31, 0x31, 0x31 },
2411 .tuner_type = TUNER_PHILIPS_NTSC_M,
2412 .tuner_addr = ADDR_UNSET,
2415 [BTTV_BOARD_SUPER_TV] = {
2416 /* Rick C <cryptdragoon@gmail.com> */
2417 .name = "Super TV Tuner",
2419 /* .audio_inputs= 1, */
2421 .muxsel = MUXSEL(2, 3, 1, 0),
2422 .tuner_type = TUNER_PHILIPS_NTSC,
2423 .tuner_addr = ADDR_UNSET,
2424 .gpiomask = 0x008007,
2425 .gpiomux = { 0, 0x000001,0,0 },
2429 [BTTV_BOARD_TIBET_CS16] = {
2430 /* Chris Fanning <video4linux@haydon.net> */
2431 .name = "Tibet Systems 'Progress DVR' CS16",
2433 /* .audio_inputs= 0, */
2435 .muxsel = MUXSEL(2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2),
2440 .tuner_type = TUNER_ABSENT,
2441 .tuner_addr = ADDR_UNSET,
2442 .muxsel_hook = tibetCS16_muxsel,
2444 [BTTV_BOARD_KODICOM_4400R] = {
2445 /* Bill Brack <wbrack@mmm.com.hk> */
2447 * Note that, because of the card's wiring, the "master"
2448 * BT878A chip (i.e. the one which controls the analog switch
2449 * and must use this card type) is the 2nd one detected. The
2450 * other 3 chips should use card type 0x85, whose description
2451 * follows this one. There is a EEPROM on the card (which is
2452 * connected to the I2C of one of those other chips), but is
2453 * not currently handled. There is also a facility for a
2454 * "monitor", which is also not currently implemented.
2456 .name = "Kodicom 4400R (master)",
2458 /* .audio_inputs= 0, */
2459 .tuner_type = TUNER_ABSENT,
2460 .tuner_addr = ADDR_UNSET,
2462 /* GPIO bits 0-9 used for analog switch:
2463 * 00 - 03: camera selector
2464 * 04 - 06: channel (controller) selector
2465 * 07: data (1->on, 0->off)
2468 * bit 16 is input from sync separator for the channel
2470 .gpiomask = 0x0003ff,
2472 .muxsel = MUXSEL(3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3),
2477 .muxsel_hook = kodicom4400r_muxsel,
2479 [BTTV_BOARD_KODICOM_4400R_SL] = {
2480 /* Bill Brack <wbrack@mmm.com.hk> */
2481 /* Note that, for reasons unknown, the "master" BT878A chip (i.e. the
2482 * one which controls the analog switch, and must use the card type)
2483 * is the 2nd one detected. The other 3 chips should use this card
2486 .name = "Kodicom 4400R (slave)",
2488 /* .audio_inputs= 0, */
2489 .tuner_type = TUNER_ABSENT,
2490 .tuner_addr = ADDR_UNSET,
2492 .gpiomask = 0x010000,
2494 .muxsel = MUXSEL(3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3),
2499 .muxsel_hook = kodicom4400r_muxsel,
2501 /* ---- card 0x86---------------------------------- */
2502 [BTTV_BOARD_ADLINK_RTV24] = {
2503 /* Michael Henson <mhenson@clarityvi.com> */
2504 /* Adlink RTV24 with special unlock codes */
2505 .name = "Adlink RTV24",
2507 /* .audio_inputs= 1, */
2509 .muxsel = MUXSEL(2, 3, 1, 0),
2510 .tuner_type = UNSET,
2511 .tuner_addr = ADDR_UNSET,
2514 /* ---- card 0x87---------------------------------- */
2515 [BTTV_BOARD_DVICO_FUSIONHDTV_5_LITE] = {
2516 /* Michael Krufky <mkrufky@m1k.net> */
2517 .name = "DViCO FusionHDTV 5 Lite",
2518 .tuner_type = TUNER_LG_TDVS_H06XF, /* TDVS-H064F */
2519 .tuner_addr = ADDR_UNSET,
2521 /* .audio_inputs= 1, */
2523 .muxsel = MUXSEL(2, 3, 1),
2524 .gpiomask = 0x00e00007,
2525 .gpiomux = { 0x00400005, 0, 0x00000001, 0 },
2526 .gpiomute = 0x00c00007,
2532 /* ---- card 0x88---------------------------------- */
2533 [BTTV_BOARD_ACORP_Y878F] = {
2534 /* Mauro Carvalho Chehab <mchehab@infradead.org> */
2535 .name = "Acorp Y878F",
2537 /* .audio_inputs= 1, */
2539 .gpiomask = 0x01fe00,
2540 .muxsel = MUXSEL(2, 3, 1, 1),
2541 .gpiomux = { 0x001e00, 0, 0x018000, 0x014000 },
2542 .gpiomute = 0x002000,
2545 .tuner_type = TUNER_YMEC_TVF66T5_B_DFF,
2546 .tuner_addr = 0xc1 >>1,
2549 /* ---- card 0x89 ---------------------------------- */
2550 [BTTV_BOARD_CONCEPTRONIC_CTVFMI2] = {
2551 .name = "Conceptronic CTVFMi v2",
2553 /* .audio_inputs= 1, */
2555 .gpiomask = 0x001c0007,
2556 .muxsel = MUXSEL(2, 3, 1, 1),
2557 .gpiomux = { 0, 1, 2, 2 },
2561 .tuner_type = TUNER_TENA_9533_DI,
2562 .tuner_addr = ADDR_UNSET,
2566 /* ---- card 0x8a ---------------------------------- */
2567 [BTTV_BOARD_PV_BT878P_2E] = {
2568 .name = "Prolink Pixelview PV-BT878P+ (Rev.2E)",
2570 /* .audio_inputs= 1, */
2573 .gpiomask = 0x01fe00,
2574 .muxsel = MUXSEL(2, 3, 1, 1, 0), /* in 4 is digital */
2575 /* .digital_mode= DIGITAL_MODE_CAMERA, */
2576 .gpiomux = { 0x00400, 0x10400, 0x04400, 0x80000 },
2577 .gpiomute = 0x12400,
2580 .tuner_type = TUNER_LG_PAL_FM,
2581 .tuner_addr = ADDR_UNSET,
2584 /* ---- card 0x8b ---------------------------------- */
2585 [BTTV_BOARD_PV_M4900] = {
2586 /* Sérgio Fortier <sergiofortier@yahoo.com.br> */
2587 .name = "Prolink PixelView PlayTV MPEG2 PV-M4900",
2589 /* .audio_inputs= 1, */
2592 .muxsel = MUXSEL(2, 3, 1, 1),
2593 .gpiomux = { 0x21, 0x20, 0x24, 0x2c },
2597 .tuner_type = TUNER_YMEC_TVF_5533MF,
2598 .tuner_addr = ADDR_UNSET,
2602 /* ---- card 0x8c ---------------------------------- */
2603 /* Has four Bt878 chips behind a PCI bridge, each chip has:
2604 one external BNC composite input (mux 2)
2605 three internal composite inputs (unknown muxes)
2606 an 18-bit stereo A/D (CS5331A), which has:
2607 one external stereo unblanced (RCA) audio connection
2608 one (or 3?) internal stereo balanced (XLR) audio connection
2609 input is selected via gpio to a 14052B mux
2610 (mask=0x300, unbal=0x000, bal=0x100, ??=0x200,0x300)
2611 gain is controlled via an X9221A chip on the I2C bus @0x28
2612 sample rate is controlled via gpio to an MK1413S
2613 (mask=0x3, 32kHz=0x0, 44.1kHz=0x1, 48kHz=0x2, ??=0x3)
2614 There is neither a tuner nor an svideo input. */
2615 [BTTV_BOARD_OSPREY440] = {
2616 .name = "Osprey 440",
2618 /* .audio_inputs= 2, */
2620 .muxsel = MUXSEL(2, 3, 0, 1), /* 3,0,1 are guesses */
2622 .gpiomute = 0x000, /* int + 32kHz */
2623 .gpiomux = { 0, 0, 0x000, 0x100},
2625 .tuner_type = TUNER_ABSENT,
2626 .tuner_addr = ADDR_UNSET,
2631 /* ---- card 0x8d ---------------------------------- */
2632 [BTTV_BOARD_ASOUND_SKYEYE] = {
2633 .name = "Asound Skyeye PCTV",
2635 /* .audio_inputs= 1, */
2638 .muxsel = MUXSEL(2, 3, 1, 1),
2639 .gpiomux = { 2, 0, 0, 0 },
2643 .tuner_type = TUNER_PHILIPS_NTSC,
2644 .tuner_addr = ADDR_UNSET,
2646 /* ---- card 0x8e ---------------------------------- */
2647 [BTTV_BOARD_SABRENT_TVFM] = {
2648 .name = "Sabrent TV-FM (bttv version)",
2650 /* .audio_inputs= 1, */
2652 .gpiomask = 0x108007,
2653 .muxsel = MUXSEL(2, 3, 1, 1),
2654 .gpiomux = { 100000, 100002, 100002, 100000 },
2659 .tuner_type = TUNER_TNF_5335MF,
2660 .tuner_addr = ADDR_UNSET,
2663 /* ---- card 0x8f ---------------------------------- */
2664 [BTTV_BOARD_HAUPPAUGE_IMPACTVCB] = {
2665 .name = "Hauppauge ImpactVCB (bt878)",
2667 /* .audio_inputs= 0, */
2669 .gpiomask = 0x0f, /* old: 7 */
2670 .muxsel = MUXSEL(0, 1, 3, 2), /* Composite 0-3 */
2674 .tuner_type = TUNER_ABSENT,
2675 .tuner_addr = ADDR_UNSET,
2677 [BTTV_BOARD_MACHTV_MAGICTV] = {
2678 /* Julian Calaby <julian.calaby@gmail.com>
2679 * Slightly different from original MachTV definition (0x60)
2681 * FIXME: RegSpy says gpiomask should be "0x001c800f", but it
2682 * stuffs up remote chip. Bug is a pin on the jaecs is not set
2683 * properly (methinks) causing no keyup bits being set */
2685 .name = "MagicTV", /* rebranded MachTV */
2687 /* .audio_inputs= 1, */
2690 .muxsel = MUXSEL(2, 3, 1, 1),
2691 .gpiomux = { 0, 1, 2, 3 },
2693 .tuner_type = TUNER_TEMIC_4009FR5_PAL,
2694 .tuner_addr = ADDR_UNSET,
2699 [BTTV_BOARD_SSAI_SECURITY] = {
2700 .name = "SSAI Security Video Interface",
2702 /* .audio_inputs= 0, */
2704 .muxsel = MUXSEL(0, 1, 2, 3),
2705 .tuner_type = TUNER_ABSENT,
2706 .tuner_addr = ADDR_UNSET,
2708 [BTTV_BOARD_SSAI_ULTRASOUND] = {
2709 .name = "SSAI Ultrasound Video Interface",
2711 /* .audio_inputs= 0, */
2713 .muxsel = MUXSEL(2, 0, 1, 3),
2714 .tuner_type = TUNER_ABSENT,
2715 .tuner_addr = ADDR_UNSET,
2717 /* ---- card 0x94---------------------------------- */
2718 [BTTV_BOARD_DVICO_FUSIONHDTV_2] = {
2719 .name = "DViCO FusionHDTV 2",
2720 .tuner_type = TUNER_PHILIPS_FCV1236D,
2721 .tuner_addr = ADDR_UNSET,
2723 /* .audio_inputs= 1, */
2725 .muxsel = MUXSEL(2, 3, 1),
2726 .gpiomask = 0x00e00007,
2727 .gpiomux = { 0x00400005, 0, 0x00000001, 0 },
2728 .gpiomute = 0x00c00007,
2733 /* ---- card 0x95---------------------------------- */
2734 [BTTV_BOARD_TYPHOON_TVTUNERPCI] = {
2735 .name = "Typhoon TV-Tuner PCI (50684)",
2737 /* .audio_inputs= 1, */
2739 .gpiomask = 0x3014f,
2740 .muxsel = MUXSEL(2, 3, 1, 1),
2741 .gpiomux = { 0x20001,0x10001, 0, 0 },
2745 .tuner_type = TUNER_PHILIPS_PAL_I,
2746 .tuner_addr = ADDR_UNSET,
2748 [BTTV_BOARD_GEOVISION_GV600] = {
2750 .name = "Geovision GV-600",
2752 /* .audio_inputs= 0, */
2755 .muxsel = MUXSEL(2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2),
2756 .muxsel_hook = geovision_muxsel,
2760 .tuner_type = TUNER_ABSENT,
2761 .tuner_addr = ADDR_UNSET,
2763 [BTTV_BOARD_KOZUMI_KTV_01C] = {
2764 /* Mauro Lacy <mauro@lacy.com.ar>
2765 * Based on MagicTV and Conceptronic CONTVFMi */
2767 .name = "Kozumi KTV-01C",
2769 /* .audio_inputs= 1, */
2771 .gpiomask = 0x008007,
2772 .muxsel = MUXSEL(2, 3, 1, 1),
2773 .gpiomux = { 0, 1, 2, 2 }, /* CONTVFMi */
2774 .gpiomute = 3, /* CONTVFMi */
2776 .tuner_type = TUNER_PHILIPS_FM1216ME_MK3, /* TCL MK3 */
2777 .tuner_addr = ADDR_UNSET,
2782 [BTTV_BOARD_ENLTV_FM_2] = {
2783 /* Encore TV Tuner Pro ENL TV-FM-2
2784 Mauro Carvalho Chehab <mchehab@infradead.org */
2785 .name = "Encore ENL TV-FM-2",
2787 /* .audio_inputs= 1, */
2789 /* bit 6 -> IR disabled
2790 bit 18/17 = 00 -> mute
2791 01 -> enable external audio input
2792 10 -> internal audio input (mono?)
2793 11 -> internal audio input
2795 .gpiomask = 0x060040,
2796 .muxsel = MUXSEL(2, 3, 3),
2797 .gpiomux = { 0x60000, 0x60000, 0x20000, 0x20000 },
2799 .tuner_type = TUNER_TCL_MF02GIP_5N,
2800 .tuner_addr = ADDR_UNSET,
2805 [BTTV_BOARD_VD012] = {
2806 /* D.Heer@Phytec.de */
2807 .name = "PHYTEC VD-012 (bt878)",
2809 /* .audio_inputs= 0, */
2812 .muxsel = MUXSEL(0, 2, 3, 1),
2813 .gpiomux = { 0, 0, 0, 0 }, /* card has no audio */
2816 .tuner_type = TUNER_ABSENT,
2817 .tuner_addr = ADDR_UNSET,
2819 [BTTV_BOARD_VD012_X1] = {
2820 /* D.Heer@Phytec.de */
2821 .name = "PHYTEC VD-012-X1 (bt878)",
2823 /* .audio_inputs= 0, */
2826 .muxsel = MUXSEL(2, 3, 1),
2827 .gpiomux = { 0, 0, 0, 0 }, /* card has no audio */
2830 .tuner_type = TUNER_ABSENT,
2831 .tuner_addr = ADDR_UNSET,
2833 [BTTV_BOARD_VD012_X2] = {
2834 /* D.Heer@Phytec.de */
2835 .name = "PHYTEC VD-012-X2 (bt878)",
2837 /* .audio_inputs= 0, */
2840 .muxsel = MUXSEL(3, 2, 1),
2841 .gpiomux = { 0, 0, 0, 0 }, /* card has no audio */
2844 .tuner_type = TUNER_ABSENT,
2845 .tuner_addr = ADDR_UNSET,
2847 [BTTV_BOARD_GEOVISION_GV800S] = {
2848 /* Bruno Christo <bchristo@inf.ufsm.br>
2850 * GeoVision GV-800(S) has 4 Conexant Fusion 878A:
2851 * 1 audio input per BT878A = 4 audio inputs
2852 * 4 video inputs per BT878A = 16 video inputs
2853 * This is the first BT878A chip of the GV-800(S). It's the
2854 * "master" chip and it controls the video inputs through an
2855 * analog multiplexer (a CD22M3494) via some GPIO pins. The
2856 * slaves should use card type 0x9e (following this one).
2857 * There is a EEPROM on the card which is currently not handled.
2858 * The audio input is not working yet.
2860 .name = "Geovision GV-800(S) (master)",
2862 /* .audio_inputs= 1, */
2863 .tuner_type = TUNER_ABSENT,
2864 .tuner_addr = ADDR_UNSET,
2866 .gpiomask = 0xf107f,
2868 .muxsel = MUXSEL(2, 2, 2, 2),
2873 .muxsel_hook = gv800s_muxsel,
2875 [BTTV_BOARD_GEOVISION_GV800S_SL] = {
2876 /* Bruno Christo <bchristo@inf.ufsm.br>
2878 * GeoVision GV-800(S) has 4 Conexant Fusion 878A:
2879 * 1 audio input per BT878A = 4 audio inputs
2880 * 4 video inputs per BT878A = 16 video inputs
2881 * The 3 other BT878A chips are "slave" chips of the GV-800(S)
2882 * and should use this card type.
2883 * The audio input is not working yet.
2885 .name = "Geovision GV-800(S) (slave)",
2887 /* .audio_inputs= 1, */
2888 .tuner_type = TUNER_ABSENT,
2889 .tuner_addr = ADDR_UNSET,
2893 .muxsel = MUXSEL(2, 2, 2, 2),
2898 .muxsel_hook = gv800s_muxsel,
2900 [BTTV_BOARD_PV183] = {
2901 .name = "ProVideo PV183", /* 0x9f */
2903 /* .audio_inputs= 0, */
2906 .muxsel = MUXSEL(2, 3),
2911 .tuner_type = TUNER_ABSENT,
2912 .tuner_addr = ADDR_UNSET,
2916 static const unsigned int bttv_num_tvcards = ARRAY_SIZE(bttv_tvcards);
2918 /* ----------------------------------------------------------------------- */
2920 static unsigned char eeprom_data[256];
2925 void __devinit bttv_idcard(struct bttv *btv)
2927 unsigned int gpiobits;
2931 /* read PCI subsystem ID */
2932 pci_read_config_word(btv->c.pci, PCI_SUBSYSTEM_ID, &tmp);
2933 btv->cardid = tmp << 16;
2934 pci_read_config_word(btv->c.pci, PCI_SUBSYSTEM_VENDOR_ID, &tmp);
2937 if (0 != btv->cardid && 0xffffffff != btv->cardid) {
2938 /* look for the card */
2939 for (type = -1, i = 0; cards[i].id != 0; i++)
2940 if (cards[i].id == btv->cardid)
2945 printk(KERN_INFO "bttv%d: detected: %s [card=%d], "
2946 "PCI subsystem ID is %04x:%04x\n",
2947 btv->c.nr,cards[type].name,cards[type].cardnr,
2948 btv->cardid & 0xffff,
2949 (btv->cardid >> 16) & 0xffff);
2950 btv->c.type = cards[type].cardnr;
2953 printk(KERN_INFO "bttv%d: subsystem: %04x:%04x (UNKNOWN)\n",
2954 btv->c.nr, btv->cardid & 0xffff,
2955 (btv->cardid >> 16) & 0xffff);
2956 printk(KERN_DEBUG "please mail id, board name and "
2957 "the correct card= insmod option to linux-media@vger.kernel.org\n");
2961 /* let the user override the autodetected type */
2962 if (card[btv->c.nr] < bttv_num_tvcards)
2963 btv->c.type=card[btv->c.nr];
2965 /* print which card config we are using */
2966 printk(KERN_INFO "bttv%d: using: %s [card=%d,%s]\n",btv->c.nr,
2967 bttv_tvcards[btv->c.type].name, btv->c.type,
2968 card[btv->c.nr] < bttv_num_tvcards
2969 ? "insmod option" : "autodetected");
2971 /* overwrite gpio stuff ?? */
2972 if (UNSET == audioall && UNSET == audiomux[0])
2975 if (UNSET != audiomux[0]) {
2977 for (i = 0; i < ARRAY_SIZE(bttv_tvcards->gpiomux); i++) {
2978 bttv_tvcards[btv->c.type].gpiomux[i] = audiomux[i];
2979 gpiobits |= audiomux[i];
2982 gpiobits = audioall;
2983 for (i = 0; i < ARRAY_SIZE(bttv_tvcards->gpiomux); i++) {
2984 bttv_tvcards[btv->c.type].gpiomux[i] = audioall;
2987 bttv_tvcards[btv->c.type].gpiomask = (UNSET != gpiomask) ? gpiomask : gpiobits;
2988 printk(KERN_INFO "bttv%d: gpio config override: mask=0x%x, mux=",
2989 btv->c.nr,bttv_tvcards[btv->c.type].gpiomask);
2990 for (i = 0; i < ARRAY_SIZE(bttv_tvcards->gpiomux); i++) {
2991 printk("%s0x%x", i ? "," : "", bttv_tvcards[btv->c.type].gpiomux[i]);
2997 * (most) board specific initialisations goes here
3000 /* Some Modular Technology cards have an eeprom, but no subsystem ID */
3001 static void identify_by_eeprom(struct bttv *btv, unsigned char eeprom_data[256])
3005 if (0 == strncmp(eeprom_data,"GET MM20xPCTV",13))
3006 type = BTTV_BOARD_MODTEC_205;
3007 else if (0 == strncmp(eeprom_data+20,"Picolo",7))
3008 type = BTTV_BOARD_EURESYS_PICOLO;
3009 else if (eeprom_data[0] == 0x84 && eeprom_data[2]== 0)
3010 type = BTTV_BOARD_HAUPPAUGE; /* old bt848 */
3014 printk("bttv%d: detected by eeprom: %s [card=%d]\n",
3015 btv->c.nr, bttv_tvcards[btv->c.type].name, btv->c.type);
3019 static void flyvideo_gpio(struct bttv *btv)
3021 int gpio, has_remote, has_radio, is_capture_only;
3022 int is_lr90, has_tda9820_tda9821;
3023 int tuner_type = UNSET, ttype;
3025 gpio_inout(0xffffff, 0);
3026 udelay(8); /* without this we would see the 0x1800 mask */
3028 /* FIXME: must restore OUR_EN ??? */
3030 /* all cards provide GPIO info, some have an additional eeprom
3031 * LR50: GPIO coding can be found lower right CP1 .. CP9
3032 * CP9=GPIO23 .. CP1=GPIO15; when OPEN, the corresponding GPIO reads 1.
3034 * LR90: GP9=GPIO23 .. GP1=GPIO15 (right above the bt878)
3036 * lowest 3 bytes are remote control codes (no handshake needed)
3037 * xxxFFF: No remote control chip soldered
3038 * xxxF00(LR26/LR50), xxxFE0(LR90): Remote control chip (LVA001 or CF45) soldered
3039 * Note: Some bits are Audio_Mask !
3041 ttype = (gpio & 0x0f0000) >> 16;
3044 tuner_type = 2; /* NTSC, e.g. TPI8NSR11P */
3047 tuner_type = 39; /* LG NTSC (newer TAPC series) TAPC-H701P */
3050 tuner_type = 5; /* Philips PAL TPI8PSB02P, TPI8PSB12P, TPI8PSB12D or FI1216, FM1216 */
3053 tuner_type = 37; /* LG PAL (newer TAPC series) TAPC-G702P */
3056 tuner_type = 3; /* Philips SECAM(+PAL) FQ1216ME or FI1216MF */
3059 printk(KERN_INFO "bttv%d: FlyVideo_gpio: unknown tuner type.\n", btv->c.nr);
3063 has_remote = gpio & 0x800000;
3064 has_radio = gpio & 0x400000;
3065 /* unknown 0x200000;
3066 * unknown2 0x100000; */
3067 is_capture_only = !(gpio & 0x008000); /* GPIO15 */
3068 has_tda9820_tda9821 = !(gpio & 0x004000);
3069 is_lr90 = !(gpio & 0x002000); /* else LR26/LR50 (LR38/LR51 f. capture only) */
3071 * gpio & 0x001000 output bit for audio routing */
3073 if (is_capture_only)
3074 tuner_type = TUNER_ABSENT; /* No tuner present */
3076 printk(KERN_INFO "bttv%d: FlyVideo Radio=%s RemoteControl=%s Tuner=%d gpio=0x%06x\n",
3077 btv->c.nr, has_radio ? "yes" : "no ",
3078 has_remote ? "yes" : "no ", tuner_type, gpio);
3079 printk(KERN_INFO "bttv%d: FlyVideo LR90=%s tda9821/tda9820=%s capture_only=%s\n",
3080 btv->c.nr, is_lr90 ? "yes" : "no ",
3081 has_tda9820_tda9821 ? "yes" : "no ",
3082 is_capture_only ? "yes" : "no ");
3084 if (tuner_type != UNSET) /* only set if known tuner autodetected, else let insmod option through */
3085 btv->tuner_type = tuner_type;
3086 btv->has_radio = has_radio;
3088 /* LR90 Audio Routing is done by 2 hef4052, so Audio_Mask has 4 bits: 0x001c80
3089 * LR26/LR50 only has 1 hef4052, Audio_Mask 0x000c00
3090 * Audio options: from tuner, from tda9821/tda9821(mono,stereo,sap), from tda9874, ext., mute */
3091 if (has_tda9820_tda9821)
3092 btv->audio_mode_gpio = lt9415_audio;
3093 /* todo: if(has_tda9874) btv->audio_mode_gpio = fv2000s_audio; */
3096 static int miro_tunermap[] = { 0,6,2,3, 4,5,6,0, 3,0,4,5, 5,2,16,1,
3097 14,2,17,1, 4,1,4,3, 1,2,16,1, 4,4,4,4 };
3098 static int miro_fmtuner[] = { 0,0,0,0, 0,0,0,0, 0,0,0,0, 0,0,0,1,
3099 1,1,1,1, 1,1,1,0, 0,0,0,0, 0,1,0,0 };
3101 static void miro_pinnacle_gpio(struct bttv *btv)
3106 gpio_inout(0xffffff, 0);
3108 id = ((gpio>>10) & 63) -1;
3109 msp = bttv_I2CRead(btv, I2C_ADDR_MSP3400, "MSP34xx");
3111 btv->tuner_type = miro_tunermap[id];
3112 if (0 == (gpio & 0x20)) {
3114 if (!miro_fmtuner[id]) {
3115 btv->has_matchbox = 1;
3116 btv->mbox_we = (1<<6);
3117 btv->mbox_most = (1<<7);
3118 btv->mbox_clk = (1<<8);
3119 btv->mbox_data = (1<<9);
3120 btv->mbox_mask = (1<<6)|(1<<7)|(1<<8)|(1<<9);
3126 if (btv->c.type == BTTV_BOARD_MIRO)
3127 btv->c.type = BTTV_BOARD_MIROPRO;
3128 if (btv->c.type == BTTV_BOARD_PINNACLE)
3129 btv->c.type = BTTV_BOARD_PINNACLEPRO;
3132 "bttv%d: miro: id=%d tuner=%d radio=%s stereo=%s\n",
3133 btv->c.nr, id+1, btv->tuner_type,
3134 !btv->has_radio ? "no" :
3135 (btv->has_matchbox ? "matchbox" : "fmtuner"),
3136 (-1 == msp) ? "no" : "yes");
3138 /* new cards with microtune tuner */
3143 info = "PAL / mono";
3144 btv->tda9887_conf = TDA9887_INTERCARRIER;
3147 info = "PAL+SECAM / stereo";
3149 btv->tda9887_conf = TDA9887_QSS;
3152 info = "NTSC / stereo";
3154 btv->tda9887_conf = TDA9887_QSS;
3157 info = "PAL+SECAM / mono";
3158 btv->tda9887_conf = TDA9887_QSS;
3161 info = "NTSC / mono";
3162 btv->tda9887_conf = TDA9887_INTERCARRIER;
3165 info = "NTSC / stereo";
3166 btv->tda9887_conf = TDA9887_INTERCARRIER;
3169 info = "PAL / stereo";
3170 btv->tda9887_conf = TDA9887_INTERCARRIER;
3173 info = "oops: unknown card";
3177 btv->c.type = BTTV_BOARD_PINNACLEPRO;
3179 "bttv%d: pinnacle/mt: id=%d info=\"%s\" radio=%s\n",
3180 btv->c.nr, id, info, btv->has_radio ? "yes" : "no");
3181 btv->tuner_type = TUNER_MT2032;
3185 /* GPIO21 L: Buffer aktiv, H: Buffer inaktiv */
3186 #define LM1882_SYNC_DRIVE 0x200000L
3188 static void init_ids_eagle(struct bttv *btv)
3190 gpio_inout(0xffffff,0xFFFF37);
3191 gpio_write(0x200020);
3193 /* flash strobe inverter ?! */
3194 gpio_write(0x200024);
3196 /* switch sync drive off */
3197 gpio_bits(LM1882_SYNC_DRIVE,LM1882_SYNC_DRIVE);
3199 /* set BT848 muxel to 2 */
3200 btaor((2)<<5, ~(2<<5), BT848_IFORM);
3203 /* Muxsel helper for the IDS Eagle.
3204 * the eagles does not use the standard muxsel-bits but
3205 * has its own multiplexer */
3206 static void eagle_muxsel(struct bttv *btv, unsigned int input)
3208 gpio_bits(3, input & 3);
3211 /* set chroma ADC to sleep */
3212 btor(BT848_ADC_C_SLEEP, BT848_ADC);
3213 /* set to composite video */
3214 btand(~BT848_CONTROL_COMP, BT848_E_CONTROL);
3215 btand(~BT848_CONTROL_COMP, BT848_O_CONTROL);
3217 /* switch sync drive off */
3218 gpio_bits(LM1882_SYNC_DRIVE,LM1882_SYNC_DRIVE);
3221 static void gvc1100_muxsel(struct bttv *btv, unsigned int input)
3223 static const int masks[] = {0x30, 0x01, 0x12, 0x23};
3224 gpio_write(masks[input%4]);
3227 /* LMLBT4x initialization - to allow access to GPIO bits for sensors input and
3230 GPIObit | 10 | 9 | 8 | 7 | 6 | 5 | 4 | 3 | 2 | 1 | 0 |
3231 assignment | TI | O3|INx| O2| O1|IN4|IN3|IN2|IN1| | |
3233 IN - sensor inputs, INx - sensor inputs and TI XORed together
3234 O1,O2,O3 - alarm outputs (relays)
3236 OUT ENABLE 1 1 0 . 1 1 0 0 . 0 0 0 0 = 0x6C0
3240 static void init_lmlbt4x(struct bttv *btv)
3242 printk(KERN_DEBUG "LMLBT4x init\n");
3243 btwrite(0x000000, BT848_GPIO_REG_INP);
3244 gpio_inout(0xffffff, 0x0006C0);
3245 gpio_write(0x000000);
3248 static void sigmaSQ_muxsel(struct bttv *btv, unsigned int input)
3250 unsigned int inmux = input % 8;
3251 gpio_inout( 0xf, 0xf );
3252 gpio_bits( 0xf, inmux );
3255 static void sigmaSLC_muxsel(struct bttv *btv, unsigned int input)
3257 unsigned int inmux = input % 4;
3258 gpio_inout( 3<<9, 3<<9 );
3259 gpio_bits( 3<<9, inmux<<9 );
3262 static void geovision_muxsel(struct bttv *btv, unsigned int input)
3264 unsigned int inmux = input % 16;
3265 gpio_inout(0xf, 0xf);
3266 gpio_bits(0xf, inmux);
3269 /* ----------------------------------------------------------------------- */
3271 static void bttv_reset_audio(struct bttv *btv)
3274 * BT878A has a audio-reset register.
3275 * 1. This register is an audio reset function but it is in
3276 * function-0 (video capture) address space.
3277 * 2. It is enough to do this once per power-up of the card.
3278 * 3. There is a typo in the Conexant doc -- it is not at
3279 * 0x5B, but at 0x058. (B is an odd-number, obviously a typo!).
3280 * --//Shrikumar 030609
3286 printk("bttv%d: BT878A ARESET\n",btv->c.nr);
3287 btwrite((1<<7), 0x058);
3292 /* initialization part one -- before registering i2c bus */
3293 void __devinit bttv_init_card1(struct bttv *btv)
3295 switch (btv->c.type) {
3296 case BTTV_BOARD_HAUPPAUGE:
3297 case BTTV_BOARD_HAUPPAUGE878:
3298 boot_msp34xx(btv,5);
3300 case BTTV_BOARD_VOODOOTV_200:
3301 case BTTV_BOARD_VOODOOTV_FM:
3302 boot_msp34xx(btv,20);
3304 case BTTV_BOARD_AVERMEDIA98:
3305 boot_msp34xx(btv,11);
3307 case BTTV_BOARD_HAUPPAUGEPVR:
3310 case BTTV_BOARD_TWINHAN_DST:
3311 case BTTV_BOARD_AVDVBT_771:
3312 case BTTV_BOARD_PINNACLESAT:
3313 btv->use_i2c_hw = 1;
3315 case BTTV_BOARD_ADLINK_RTV24:
3320 if (!bttv_tvcards[btv->c.type].has_dvb)
3321 bttv_reset_audio(btv);
3324 /* initialization part two -- after registering i2c bus */
3325 void __devinit bttv_init_card2(struct bttv *btv)
3327 int addr=ADDR_UNSET;
3329 btv->tuner_type = UNSET;
3331 if (BTTV_BOARD_UNKNOWN == btv->c.type) {
3332 bttv_readee(btv,eeprom_data,0xa0);
3333 identify_by_eeprom(btv,eeprom_data);
3336 switch (btv->c.type) {
3337 case BTTV_BOARD_MIRO:
3338 case BTTV_BOARD_MIROPRO:
3339 case BTTV_BOARD_PINNACLE:
3340 case BTTV_BOARD_PINNACLEPRO:
3342 miro_pinnacle_gpio(btv);
3344 case BTTV_BOARD_FLYVIDEO_98:
3345 case BTTV_BOARD_MAXI:
3346 case BTTV_BOARD_LIFE_FLYKIT:
3347 case BTTV_BOARD_FLYVIDEO:
3348 case BTTV_BOARD_TYPHOON_TVIEW:
3349 case BTTV_BOARD_CHRONOS_VS2:
3350 case BTTV_BOARD_FLYVIDEO_98FM:
3351 case BTTV_BOARD_FLYVIDEO2000:
3352 case BTTV_BOARD_FLYVIDEO98EZ:
3353 case BTTV_BOARD_CONFERENCETV:
3354 case BTTV_BOARD_LIFETEC_9415:
3357 case BTTV_BOARD_HAUPPAUGE:
3358 case BTTV_BOARD_HAUPPAUGE878:
3359 case BTTV_BOARD_HAUPPAUGEPVR:
3360 /* pick up some config infos from the eeprom */
3361 bttv_readee(btv,eeprom_data,0xa0);
3362 hauppauge_eeprom(btv);
3364 case BTTV_BOARD_AVERMEDIA98:
3365 case BTTV_BOARD_AVPHONE98:
3366 bttv_readee(btv,eeprom_data,0xa0);
3367 avermedia_eeprom(btv);
3369 case BTTV_BOARD_PXC200:
3372 case BTTV_BOARD_PICOLO_TETRA_CHIP:
3373 picolo_tetra_init(btv);
3375 case BTTV_BOARD_VHX:
3377 btv->has_matchbox = 1;
3378 btv->mbox_we = 0x20;
3380 btv->mbox_clk = 0x08;
3381 btv->mbox_data = 0x10;
3382 btv->mbox_mask = 0x38;
3384 case BTTV_BOARD_VOBIS_BOOSTAR:
3385 case BTTV_BOARD_TERRATV:
3386 terratec_active_radio_upgrade(btv);
3388 case BTTV_BOARD_MAGICTVIEW061:
3389 if (btv->cardid == 0x3002144f) {
3391 printk("bttv%d: radio detected by subsystem id (CPH05x)\n",btv->c.nr);
3394 case BTTV_BOARD_STB2:
3395 if (btv->cardid == 0x3060121a) {
3396 /* Fix up entry for 3DFX VoodooTV 100,
3397 which is an OEM STB card variant. */
3399 btv->tuner_type=TUNER_TEMIC_NTSC;
3402 case BTTV_BOARD_OSPREY1x0:
3403 case BTTV_BOARD_OSPREY1x0_848:
3404 case BTTV_BOARD_OSPREY101_848:
3405 case BTTV_BOARD_OSPREY1x1:
3406 case BTTV_BOARD_OSPREY1x1_SVID:
3407 case BTTV_BOARD_OSPREY2xx:
3408 case BTTV_BOARD_OSPREY2x0_SVID:
3409 case BTTV_BOARD_OSPREY2x0:
3410 case BTTV_BOARD_OSPREY440:
3411 case BTTV_BOARD_OSPREY500:
3412 case BTTV_BOARD_OSPREY540:
3413 case BTTV_BOARD_OSPREY2000:
3414 bttv_readee(btv,eeprom_data,0xa0);
3415 osprey_eeprom(btv, eeprom_data);
3417 case BTTV_BOARD_IDS_EAGLE:
3418 init_ids_eagle(btv);
3420 case BTTV_BOARD_MODTEC_205:
3421 bttv_readee(btv,eeprom_data,0xa0);
3424 case BTTV_BOARD_LMLBT4:
3427 case BTTV_BOARD_TIBET_CS16:
3428 tibetCS16_init(btv);
3430 case BTTV_BOARD_KODICOM_4400R:
3431 kodicom4400r_init(btv);
3433 case BTTV_BOARD_GEOVISION_GV800S:
3438 /* pll configuration */
3439 if (!(btv->id==848 && btv->revision==0x11)) {
3440 /* defaults from card list */
3441 if (PLL_28 == bttv_tvcards[btv->c.type].pll) {
3442 btv->pll.pll_ifreq=28636363;
3443 btv->pll.pll_crystal=BT848_IFORM_XT0;
3445 if (PLL_35 == bttv_tvcards[btv->c.type].pll) {
3446 btv->pll.pll_ifreq=35468950;
3447 btv->pll.pll_crystal=BT848_IFORM_XT1;
3449 /* insmod options can override */
3450 switch (pll[btv->c.nr]) {
3452 btv->pll.pll_crystal = 0;
3453 btv->pll.pll_ifreq = 0;
3454 btv->pll.pll_ofreq = 0;
3456 case 1: /* 28 MHz */
3458 btv->pll.pll_ifreq = 28636363;
3459 btv->pll.pll_ofreq = 0;
3460 btv->pll.pll_crystal = BT848_IFORM_XT0;
3462 case 2: /* 35 MHz */
3464 btv->pll.pll_ifreq = 35468950;
3465 btv->pll.pll_ofreq = 0;
3466 btv->pll.pll_crystal = BT848_IFORM_XT1;
3470 btv->pll.pll_current = -1;
3472 /* tuner configuration (from card list / autodetect / insmod option) */
3473 if (ADDR_UNSET != bttv_tvcards[btv->c.type].tuner_addr)
3474 addr = bttv_tvcards[btv->c.type].tuner_addr;
3476 if (UNSET != bttv_tvcards[btv->c.type].tuner_type)
3477 if (UNSET == btv->tuner_type)
3478 btv->tuner_type = bttv_tvcards[btv->c.type].tuner_type;
3479 if (UNSET != tuner[btv->c.nr])
3480 btv->tuner_type = tuner[btv->c.nr];
3482 if (btv->tuner_type == TUNER_ABSENT)
3483 printk(KERN_INFO "bttv%d: tuner absent\n", btv->c.nr);
3484 else if(btv->tuner_type == UNSET)
3485 printk(KERN_WARNING "bttv%d: tuner type unset\n", btv->c.nr);
3487 printk(KERN_INFO "bttv%d: tuner type=%d\n", btv->c.nr,
3490 if (autoload != UNSET) {
3491 printk(KERN_WARNING "bttv%d: the autoload option is obsolete.\n", btv->c.nr);
3492 printk(KERN_WARNING "bttv%d: use option msp3400, tda7432 or tvaudio to\n", btv->c.nr);
3493 printk(KERN_WARNING "bttv%d: override which audio module should be used.\n", btv->c.nr);
3496 if (UNSET == btv->tuner_type)
3497 btv->tuner_type = TUNER_ABSENT;
3499 if (btv->tuner_type != TUNER_ABSENT) {
3500 struct tuner_setup tun_setup;
3502 /* Load tuner module before issuing tuner config call! */
3503 if (bttv_tvcards[btv->c.type].has_radio)
3504 v4l2_i2c_new_probed_subdev(&btv->c.v4l2_dev,
3505 &btv->c.i2c_adap, "tuner", "tuner",
3506 v4l2_i2c_tuner_addrs(ADDRS_RADIO));
3507 v4l2_i2c_new_probed_subdev(&btv->c.v4l2_dev,
3508 &btv->c.i2c_adap, "tuner", "tuner",
3509 v4l2_i2c_tuner_addrs(ADDRS_DEMOD));
3510 v4l2_i2c_new_probed_subdev(&btv->c.v4l2_dev,
3511 &btv->c.i2c_adap, "tuner", "tuner",
3512 v4l2_i2c_tuner_addrs(ADDRS_TV_WITH_DEMOD));
3514 tun_setup.mode_mask = T_ANALOG_TV | T_DIGITAL_TV;
3515 tun_setup.type = btv->tuner_type;
3516 tun_setup.addr = addr;
3518 if (bttv_tvcards[btv->c.type].has_radio)
3519 tun_setup.mode_mask |= T_RADIO;
3521 bttv_call_all(btv, tuner, s_type_addr, &tun_setup);
3524 if (btv->tda9887_conf) {
3525 struct v4l2_priv_tun_config tda9887_cfg;
3527 tda9887_cfg.tuner = TUNER_TDA9887;
3528 tda9887_cfg.priv = &btv->tda9887_conf;
3530 bttv_call_all(btv, tuner, s_config, &tda9887_cfg);
3533 btv->dig = bttv_tvcards[btv->c.type].has_dig_in ?
3534 bttv_tvcards[btv->c.type].video_inputs - 1 : UNSET;
3535 btv->svhs = bttv_tvcards[btv->c.type].svhs == NO_SVHS ?
3536 UNSET : bttv_tvcards[btv->c.type].svhs;
3537 if (svhs[btv->c.nr] != UNSET)
3538 btv->svhs = svhs[btv->c.nr];
3539 if (remote[btv->c.nr] != UNSET)
3540 btv->has_remote = remote[btv->c.nr];
3542 if (bttv_tvcards[btv->c.type].has_radio)
3544 if (bttv_tvcards[btv->c.type].has_remote)
3546 if (!bttv_tvcards[btv->c.type].no_gpioirq)
3548 if (bttv_tvcards[btv->c.type].volume_gpio)
3549 btv->volume_gpio=bttv_tvcards[btv->c.type].volume_gpio;
3550 if (bttv_tvcards[btv->c.type].audio_mode_gpio)
3551 btv->audio_mode_gpio=bttv_tvcards[btv->c.type].audio_mode_gpio;
3553 if (btv->tuner_type == TUNER_ABSENT)
3554 return; /* no tuner or related drivers to load */
3556 if (btv->has_saa6588 || saa6588[btv->c.nr]) {
3557 /* Probe for RDS receiver chip */
3558 static const unsigned short addrs[] = {
3563 struct v4l2_subdev *sd;
3565 sd = v4l2_i2c_new_probed_subdev(&btv->c.v4l2_dev,
3566 &btv->c.i2c_adap, "saa6588", "saa6588", addrs);
3567 btv->has_saa6588 = (sd != NULL);
3570 /* try to detect audio/fader chips */
3572 /* First check if the user specified the audio chip via a module
3575 switch (audiodev[btv->c.nr]) {
3577 return; /* do not load any audio module */
3579 case 0: /* autodetect */
3583 /* The user specified that we should probe for msp3400 */
3584 static const unsigned short addrs[] = {
3585 I2C_ADDR_MSP3400 >> 1,
3586 I2C_ADDR_MSP3400_ALT >> 1,
3590 btv->sd_msp34xx = v4l2_i2c_new_probed_subdev(&btv->c.v4l2_dev,
3591 &btv->c.i2c_adap, "msp3400", "msp3400", addrs);
3592 if (btv->sd_msp34xx)
3598 /* The user specified that we should probe for tda7432 */
3599 static const unsigned short addrs[] = {
3600 I2C_ADDR_TDA7432 >> 1,
3604 if (v4l2_i2c_new_probed_subdev(&btv->c.v4l2_dev,
3605 &btv->c.i2c_adap, "tda7432", "tda7432", addrs))
3611 /* The user specified that we should probe for tvaudio */
3612 btv->sd_tvaudio = v4l2_i2c_new_probed_subdev(&btv->c.v4l2_dev,
3613 &btv->c.i2c_adap, "tvaudio", "tvaudio", tvaudio_addrs());
3614 if (btv->sd_tvaudio)
3620 printk(KERN_WARNING "bttv%d: unknown audiodev value!\n",
3625 /* There were no overrides, so now we try to discover this through the
3628 /* probe for msp3400 first: this driver can detect whether or not
3629 it really is a msp3400, so it will return NULL when the device
3630 found is really something else (e.g. a tea6300). */
3631 if (!bttv_tvcards[btv->c.type].no_msp34xx) {
3632 btv->sd_msp34xx = v4l2_i2c_new_probed_subdev_addr(&btv->c.v4l2_dev,
3633 &btv->c.i2c_adap, "msp3400", "msp3400",
3634 I2C_ADDR_MSP3400 >> 1);
3635 } else if (bttv_tvcards[btv->c.type].msp34xx_alt) {
3636 btv->sd_msp34xx = v4l2_i2c_new_probed_subdev_addr(&btv->c.v4l2_dev,
3637 &btv->c.i2c_adap, "msp3400", "msp3400",
3638 I2C_ADDR_MSP3400_ALT >> 1);
3641 /* If we found a msp34xx, then we're done. */
3642 if (btv->sd_msp34xx)
3645 /* it might also be a tda7432. */
3646 if (!bttv_tvcards[btv->c.type].no_tda7432) {
3647 static const unsigned short addrs[] = {
3648 I2C_ADDR_TDA7432 >> 1,
3652 if (v4l2_i2c_new_probed_subdev(&btv->c.v4l2_dev,
3653 &btv->c.i2c_adap, "tda7432", "tda7432", addrs))
3657 /* Now see if we can find one of the tvaudio devices. */
3658 btv->sd_tvaudio = v4l2_i2c_new_probed_subdev(&btv->c.v4l2_dev,
3659 &btv->c.i2c_adap, "tvaudio", "tvaudio", tvaudio_addrs());
3660 if (btv->sd_tvaudio)
3664 printk(KERN_WARNING "bttv%d: audio absent, no audio device found!\n",
3669 /* ----------------------------------------------------------------------- */
3671 static void modtec_eeprom(struct bttv *btv)
3673 if( strncmp(&(eeprom_data[0x1e]),"Temic 4066 FY5",14) ==0) {
3674 btv->tuner_type=TUNER_TEMIC_4066FY5_PAL_I;
3675 printk("bttv%d: Modtec: Tuner autodetected by eeprom: %s\n",
3676 btv->c.nr,&eeprom_data[0x1e]);
3677 } else if (strncmp(&(eeprom_data[0x1e]),"Alps TSBB5",10) ==0) {
3678 btv->tuner_type=TUNER_ALPS_TSBB5_PAL_I;
3679 printk("bttv%d: Modtec: Tuner autodetected by eeprom: %s\n",
3680 btv->c.nr,&eeprom_data[0x1e]);
3681 } else if (strncmp(&(eeprom_data[0x1e]),"Philips FM1246",14) ==0) {
3682 btv->tuner_type=TUNER_PHILIPS_NTSC;
3683 printk("bttv%d: Modtec: Tuner autodetected by eeprom: %s\n",
3684 btv->c.nr,&eeprom_data[0x1e]);
3686 printk("bttv%d: Modtec: Unknown TunerString: %s\n",
3687 btv->c.nr,&eeprom_data[0x1e]);
3691 static void __devinit hauppauge_eeprom(struct bttv *btv)
3695 tveeprom_hauppauge_analog(&btv->i2c_client, &tv, eeprom_data);
3696 btv->tuner_type = tv.tuner_type;
3697 btv->has_radio = tv.has_radio;
3699 printk("bttv%d: Hauppauge eeprom indicates model#%d\n",
3700 btv->c.nr, tv.model);
3703 * Some of the 878 boards have duplicate PCI IDs. Switch the board
3704 * type based on model #.
3706 if(tv.model == 64900) {
3707 printk("bttv%d: Switching board type from %s to %s\n",
3709 bttv_tvcards[btv->c.type].name,
3710 bttv_tvcards[BTTV_BOARD_HAUPPAUGE_IMPACTVCB].name);
3711 btv->c.type = BTTV_BOARD_HAUPPAUGE_IMPACTVCB;
3715 static int terratec_active_radio_upgrade(struct bttv *btv)
3720 btv->has_matchbox = 1;
3721 btv->mbox_we = 0x10;
3722 btv->mbox_most = 0x20;
3723 btv->mbox_clk = 0x08;
3724 btv->mbox_data = 0x04;
3725 btv->mbox_mask = 0x3c;
3727 btv->mbox_iow = 1 << 8;
3728 btv->mbox_ior = 1 << 9;
3729 btv->mbox_csel = 1 << 10;
3732 tea5757_write(btv, 5 * freq + 0x358); /* write 0x1ed8 */
3733 if (0x1ed8 == tea5757_read(btv)) {
3734 printk("bttv%d: Terratec Active Radio Upgrade found.\n",
3737 btv->has_saa6588 = 1;
3738 btv->has_matchbox = 1;
3741 btv->has_matchbox = 0;
3747 /* ----------------------------------------------------------------------- */
3750 * minimal bootstrap for the WinTV/PVR -- upload altera firmware.
3752 * The hcwamc.rbf firmware file is on the Hauppauge driver CD. Have
3753 * a look at Pvr/pvr45xxx.EXE (self-extracting zip archive, can be
3754 * unpacked with unzip).
3756 #define PVR_GPIO_DELAY 10
3758 #define BTTV_ALT_DATA 0x000001
3759 #define BTTV_ALT_DCLK 0x100000
3760 #define BTTV_ALT_NCONFIG 0x800000
3762 static int __devinit pvr_altera_load(struct bttv *btv, const u8 *micro,
3769 gpio_inout(0xffffff,BTTV_ALT_DATA|BTTV_ALT_DCLK|BTTV_ALT_NCONFIG);
3771 udelay(PVR_GPIO_DELAY);
3773 gpio_write(BTTV_ALT_NCONFIG);
3774 udelay(PVR_GPIO_DELAY);
3776 for (n = 0; n < microlen; n++) {
3778 for (i = 0 ; i < 8 ; i++) {
3779 gpio_bits(BTTV_ALT_DCLK,0);
3781 gpio_bits(BTTV_ALT_DATA,BTTV_ALT_DATA);
3783 gpio_bits(BTTV_ALT_DATA,0);
3784 gpio_bits(BTTV_ALT_DCLK,BTTV_ALT_DCLK);
3788 gpio_bits(BTTV_ALT_DCLK,0);
3789 udelay(PVR_GPIO_DELAY);
3791 /* begin Altera init loop (Not necessary,but doesn't hurt) */
3792 for (i = 0 ; i < 30 ; i++) {
3793 gpio_bits(BTTV_ALT_DCLK,0);
3794 gpio_bits(BTTV_ALT_DCLK,BTTV_ALT_DCLK);
3796 gpio_bits(BTTV_ALT_DCLK,0);
3800 static int __devinit pvr_boot(struct bttv *btv)
3802 const struct firmware *fw_entry;
3805 rc = request_firmware(&fw_entry, "hcwamc.rbf", &btv->c.pci->dev);
3807 printk(KERN_WARNING "bttv%d: no altera firmware [via hotplug]\n",
3811 rc = pvr_altera_load(btv, fw_entry->data, fw_entry->size);
3812 printk(KERN_INFO "bttv%d: altera firmware upload %s\n",
3813 btv->c.nr, (rc < 0) ? "failed" : "ok");
3814 release_firmware(fw_entry);
3818 /* ----------------------------------------------------------------------- */
3819 /* some osprey specific stuff */
3821 static void __devinit osprey_eeprom(struct bttv *btv, const u8 ee[256])
3827 /* This code will nevery actually get called in this case.... */
3828 if (btv->c.type == BTTV_BOARD_UNKNOWN) {
3829 /* this might be an antique... check for MMAC label in eeprom */
3830 if (!strncmp(ee, "MMAC", 4)) {
3832 for (i = 0; i < 21; i++)
3834 if (checksum != ee[21])
3836 cardid = BTTV_BOARD_OSPREY1x0_848;
3837 for (i = 12; i < 21; i++)
3838 serial *= 10, serial += ee[i] - '0';
3841 unsigned short type;
3843 for (i = 4*16; i < 8*16; i += 16) {
3844 u16 checksum = ip_compute_csum(ee + i, 16);
3846 if ((checksum&0xff) + (checksum>>8) == 0xff)
3853 /* found a valid descriptor */
3854 type = get_unaligned_be16((__be16 *)(ee+4));
3859 cardid = BTTV_BOARD_OSPREY1x0_848;
3862 cardid = BTTV_BOARD_OSPREY101_848;
3868 cardid = BTTV_BOARD_OSPREY1x0;
3872 cardid = BTTV_BOARD_OSPREY1x1;
3877 cardid = BTTV_BOARD_OSPREY1x1_SVID;
3883 cardid = BTTV_BOARD_OSPREY2xx;
3887 cardid = BTTV_BOARD_OSPREY2x0_SVID;
3890 cardid = BTTV_BOARD_OSPREY500;
3894 cardid = BTTV_BOARD_OSPREY540;
3895 /* bttv_osprey_540_init(btv); */
3900 cardid = BTTV_BOARD_OSPREY2x0;
3901 /* enable output on select control lines */
3902 gpio_inout(0xffffff,0x000303);
3905 cardid = BTTV_BOARD_OSPREY440;
3908 /* unknown...leave generic, but get serial # */
3909 printk(KERN_INFO "bttv%d: "
3910 "osprey eeprom: unknown card type 0x%04x\n",
3914 serial = get_unaligned_be32((__be32 *)(ee+6));
3917 printk(KERN_INFO "bttv%d: osprey eeprom: card=%d '%s' serial=%u\n",
3919 cardid>0 ? bttv_tvcards[cardid].name : "Unknown", serial);
3921 if (cardid<0 || btv->c.type == cardid)
3924 /* card type isn't set correctly */
3925 if (card[btv->c.nr] < bttv_num_tvcards) {
3926 printk(KERN_WARNING "bttv%d: osprey eeprom: "
3927 "Not overriding user specified card type\n", btv->c.nr);
3929 printk(KERN_INFO "bttv%d: osprey eeprom: "
3930 "Changing card type from %d to %d\n", btv->c.nr,
3931 btv->c.type, cardid);
3932 btv->c.type = cardid;
3936 /* ----------------------------------------------------------------------- */
3937 /* AVermedia specific stuff, from bktr_card.c */
3939 static int tuner_0_table[] = {
3940 TUNER_PHILIPS_NTSC, TUNER_PHILIPS_PAL /* PAL-BG*/,
3941 TUNER_PHILIPS_PAL, TUNER_PHILIPS_PAL /* PAL-I*/,
3942 TUNER_PHILIPS_PAL, TUNER_PHILIPS_PAL,
3943 TUNER_PHILIPS_SECAM, TUNER_PHILIPS_SECAM,
3944 TUNER_PHILIPS_SECAM, TUNER_PHILIPS_PAL,
3945 TUNER_PHILIPS_FM1216ME_MK3 };
3947 static int tuner_1_table[] = {
3948 TUNER_TEMIC_NTSC, TUNER_TEMIC_PAL,
3949 TUNER_TEMIC_PAL, TUNER_TEMIC_PAL,
3950 TUNER_TEMIC_PAL, TUNER_TEMIC_PAL,
3951 TUNER_TEMIC_4012FY5, TUNER_TEMIC_4012FY5, /* TUNER_TEMIC_SECAM */
3952 TUNER_TEMIC_4012FY5, TUNER_TEMIC_PAL};
3954 static void __devinit avermedia_eeprom(struct bttv *btv)
3956 int tuner_make, tuner_tv_fm, tuner_format, tuner_type = 0;
3958 tuner_make = (eeprom_data[0x41] & 0x7);
3959 tuner_tv_fm = (eeprom_data[0x41] & 0x18) >> 3;
3960 tuner_format = (eeprom_data[0x42] & 0xf0) >> 4;
3961 btv->has_remote = (eeprom_data[0x42] & 0x01);
3963 if (tuner_make == 0 || tuner_make == 2)
3964 if (tuner_format <= 0x0a)
3965 tuner_type = tuner_0_table[tuner_format];
3966 if (tuner_make == 1)
3967 if (tuner_format <= 9)
3968 tuner_type = tuner_1_table[tuner_format];
3970 if (tuner_make == 4)
3971 if (tuner_format == 0x09)
3972 tuner_type = TUNER_LG_NTSC_NEW_TAPC; /* TAPC-G702P */
3974 printk(KERN_INFO "bttv%d: Avermedia eeprom[0x%02x%02x]: tuner=",
3975 btv->c.nr, eeprom_data[0x41], eeprom_data[0x42]);
3977 btv->tuner_type = tuner_type;
3978 printk(KERN_CONT "%d", tuner_type);
3980 printk(KERN_CONT "Unknown type");
3981 printk(KERN_CONT " radio:%s remote control:%s\n",
3982 tuner_tv_fm ? "yes" : "no",
3983 btv->has_remote ? "yes" : "no");
3987 * For Voodoo TV/FM and Voodoo 200. These cards' tuners use a TDA9880
3988 * analog demod, which is not I2C controlled like the newer and more common
3989 * TDA9887 series. Instead is has two tri-state input pins, S0 and S1,
3990 * that control the IF for the video and audio. Apparently, bttv GPIO
3991 * 0x10000 is connected to S0. S0 low selects a 38.9 MHz VIF for B/G/D/K/I
3992 * (i.e., PAL) while high selects 45.75 MHz for M/N (i.e., NTSC).
3994 u32 bttv_tda9880_setnorm(struct bttv *btv, u32 gpiobits)
3997 if (btv->audio == TVAUDIO_INPUT_TUNER) {
3998 if (bttv_tvnorms[btv->tvnorm].v4l2_id & V4L2_STD_MN)
3999 gpiobits |= 0x10000;
4001 gpiobits &= ~0x10000;
4004 gpio_bits(bttv_tvcards[btv->c.type].gpiomask, gpiobits);
4010 * reset/enable the MSP on some Hauppauge cards
4011 * Thanks to Kyösti Mälkki (kmalkki@cc.hut.fi)!
4016 static void __devinit boot_msp34xx(struct bttv *btv, int pin)
4018 int mask = (1 << pin);
4020 gpio_inout(mask,mask);
4024 gpio_bits(mask,mask);
4027 bttv_gpio_tracking(btv,"msp34xx");
4029 printk(KERN_INFO "bttv%d: Hauppauge/Voodoo msp34xx: reset line "
4030 "init [%d]\n", btv->c.nr, pin);
4033 /* ----------------------------------------------------------------------- */
4034 /* Imagenation L-Model PXC200 Framegrabber */
4035 /* This is basically the same procedure as
4036 * used by Alessandro Rubini in his pxc200
4037 * driver, but using BTTV functions */
4039 static void __devinit init_PXC200(struct bttv *btv)
4041 static int vals[] __devinitdata = { 0x08, 0x09, 0x0a, 0x0b, 0x0d, 0x0d,
4042 0x01, 0x02, 0x03, 0x04, 0x05, 0x06,
4048 /* Initialise GPIO-connevted stuff */
4049 gpio_inout(0xffffff, (1<<13));
4053 /* GPIO inputs are pulled up, so no need to drive
4054 * reset pin any longer */
4055 gpio_bits(0xffffff, 0);
4057 bttv_gpio_tracking(btv,"pxc200");
4059 /* we could/should try and reset/control the AD pots? but
4060 right now we simply turned off the crushing. Without
4061 this the AGC drifts drifts
4062 remember the EN is reverse logic -->
4063 setting BT848_ADC_AGC_EN disable the AGC
4064 tboult@eecs.lehigh.edu
4067 btwrite(BT848_ADC_RESERVED|BT848_ADC_AGC_EN, BT848_ADC);
4069 /* Initialise MAX517 DAC */
4070 printk(KERN_INFO "Setting DAC reference voltage level ...\n");
4071 bttv_I2CWrite(btv,0x5E,0,0x80,1);
4073 /* Initialise 12C508 PIC */
4074 /* The I2CWrite and I2CRead commmands are actually to the
4075 * same chips - but the R/W bit is included in the address
4076 * argument so the numbers are different */
4079 printk(KERN_INFO "Initialising 12C508 PIC chip ...\n");
4081 /* First of all, enable the clock line. This is used in the PXC200-F */
4082 val = btread(BT848_GPIO_DMA_CTL);
4083 val |= BT848_GPIO_DMA_CTL_GPCLKMODE;
4084 btwrite(val, BT848_GPIO_DMA_CTL);
4086 /* Then, push to 0 the reset pin long enough to reset the *
4087 * device same as above for the reset line, but not the same
4088 * value sent to the GPIO-connected stuff
4089 * which one is the good one? */
4090 gpio_inout(0xffffff,(1<<2));
4095 for (i = 0; i < ARRAY_SIZE(vals); i++) {
4096 tmp=bttv_I2CWrite(btv,0x1E,0,vals[i],1);
4099 "I2C Write(%2.2x) = %i\nI2C Read () = %2.2x\n\n",
4100 vals[i],tmp,bttv_I2CRead(btv,0x1F,NULL));
4104 printk(KERN_INFO "PXC200 Initialised.\n");
4109 /* ----------------------------------------------------------------------- */
4111 * The Adlink RTV-24 (aka Angelo) has some special initialisation to unlock
4112 * it. This apparently involves the following procedure for each 878 chip:
4114 * 1) write 0x00C3FEFF to the GPIO_OUT_EN register
4116 * 2) write to GPIO_DATA
4122 * read from GPIO_DATA into buf (uint_32)
4123 * - if ( data>>18 & 0x01 != 0) || ( buf>>19 & 0x01 != 1 )
4124 * error. ERROR_CPLD_Check_Failed stop.
4126 * 3) write to GPIO_DATA
4127 * - write 0x4400 + 0x0E
4129 * - write 0x4410 + 0x0E
4132 * read from GPIO_DATA into buf (uint_32)
4133 * - if ( buf>>18 & 0x01 ) || ( buf>>19 & 0x01 != 0 )
4134 * error. ERROR_CPLD_Check_Failed.
4136 /* ----------------------------------------------------------------------- */
4138 init_RTV24 (struct bttv *btv)
4140 uint32_t dataRead = 0;
4141 long watchdog_value = 0x0E;
4144 "bttv%d: Adlink RTV-24 initialisation in progress ...\n",
4147 btwrite (0x00c3feff, BT848_GPIO_OUT_EN);
4149 btwrite (0 + watchdog_value, BT848_GPIO_DATA);
4151 btwrite (0x10 + watchdog_value, BT848_GPIO_DATA);
4153 btwrite (0 + watchdog_value, BT848_GPIO_DATA);
4155 dataRead = btread (BT848_GPIO_DATA);
4157 if ((((dataRead >> 18) & 0x01) != 0) || (((dataRead >> 19) & 0x01) != 1)) {
4159 "bttv%d: Adlink RTV-24 initialisation(1) ERROR_CPLD_Check_Failed (read %d)\n",
4160 btv->c.nr, dataRead);
4163 btwrite (0x4400 + watchdog_value, BT848_GPIO_DATA);
4165 btwrite (0x4410 + watchdog_value, BT848_GPIO_DATA);
4167 btwrite (watchdog_value, BT848_GPIO_DATA);
4169 dataRead = btread (BT848_GPIO_DATA);
4171 if ((((dataRead >> 18) & 0x01) != 0) || (((dataRead >> 19) & 0x01) != 0)) {
4173 "bttv%d: Adlink RTV-24 initialisation(2) ERROR_CPLD_Check_Failed (read %d)\n",
4174 btv->c.nr, dataRead);
4180 "bttv%d: Adlink RTV-24 initialisation complete.\n", btv->c.nr);
4185 /* ----------------------------------------------------------------------- */
4186 /* Miro Pro radio stuff -- the tea5757 is connected to some GPIO ports */
4188 * Copyright (c) 1999 Csaba Halasz <qgehali@uni-miskolc.hu>
4189 * This code is placed under the terms of the GNU General Public License
4191 * Brutally hacked by Dan Sheridan <dan.sheridan@contact.org.uk> djs52 8/3/00
4194 static void bus_low(struct bttv *btv, int bit)
4196 if (btv->mbox_ior) {
4197 gpio_bits(btv->mbox_ior | btv->mbox_iow | btv->mbox_csel,
4198 btv->mbox_ior | btv->mbox_iow | btv->mbox_csel);
4205 if (btv->mbox_ior) {
4206 gpio_bits(btv->mbox_iow | btv->mbox_csel, 0);
4211 static void bus_high(struct bttv *btv, int bit)
4213 if (btv->mbox_ior) {
4214 gpio_bits(btv->mbox_ior | btv->mbox_iow | btv->mbox_csel,
4215 btv->mbox_ior | btv->mbox_iow | btv->mbox_csel);
4222 if (btv->mbox_ior) {
4223 gpio_bits(btv->mbox_iow | btv->mbox_csel, 0);
4228 static int bus_in(struct bttv *btv, int bit)
4230 if (btv->mbox_ior) {
4231 gpio_bits(btv->mbox_ior | btv->mbox_iow | btv->mbox_csel,
4232 btv->mbox_ior | btv->mbox_iow | btv->mbox_csel);
4235 gpio_bits(btv->mbox_iow | btv->mbox_csel, 0);
4238 return gpio_read() & (bit);
4241 /* TEA5757 register bits */
4242 #define TEA_FREQ 0:14
4243 #define TEA_BUFFER 15:15
4245 #define TEA_SIGNAL_STRENGTH 16:17
4247 #define TEA_PORT1 18:18
4248 #define TEA_PORT0 19:19
4250 #define TEA_BAND 20:21
4251 #define TEA_BAND_FM 0
4252 #define TEA_BAND_MW 1
4253 #define TEA_BAND_LW 2
4254 #define TEA_BAND_SW 3
4256 #define TEA_MONO 22:22
4257 #define TEA_ALLOW_STEREO 0
4258 #define TEA_FORCE_MONO 1
4260 #define TEA_SEARCH_DIRECTION 23:23
4261 #define TEA_SEARCH_DOWN 0
4262 #define TEA_SEARCH_UP 1
4264 #define TEA_STATUS 24:24
4265 #define TEA_STATUS_TUNED 0
4266 #define TEA_STATUS_SEARCHING 1
4268 /* Low-level stuff */
4269 static int tea5757_read(struct bttv *btv)
4271 unsigned long timeout;
4275 /* better safe than sorry */
4276 gpio_inout(btv->mbox_mask, btv->mbox_clk | btv->mbox_we);
4278 if (btv->mbox_ior) {
4279 gpio_bits(btv->mbox_ior | btv->mbox_iow | btv->mbox_csel,
4280 btv->mbox_ior | btv->mbox_iow | btv->mbox_csel);
4285 bttv_gpio_tracking(btv,"tea5757 read");
4287 bus_low(btv,btv->mbox_we);
4288 bus_low(btv,btv->mbox_clk);
4291 timeout= jiffies + msecs_to_jiffies(1000);
4293 /* wait for DATA line to go low; error if it doesn't */
4294 while (bus_in(btv,btv->mbox_data) && time_before(jiffies, timeout))
4296 if (bus_in(btv,btv->mbox_data)) {
4297 printk(KERN_WARNING "bttv%d: tea5757: read timeout\n",btv->c.nr);
4301 dprintk("bttv%d: tea5757:",btv->c.nr);
4302 for (i = 0; i < 24; i++) {
4304 bus_high(btv,btv->mbox_clk);
4306 dprintk("%c",(bus_in(btv,btv->mbox_most) == 0)?'T':'-');
4307 bus_low(btv,btv->mbox_clk);
4309 value |= (bus_in(btv,btv->mbox_data) == 0)?0:1; /* MSB first */
4310 dprintk("%c", (bus_in(btv,btv->mbox_most) == 0)?'S':'M');
4312 dprintk("\nbttv%d: tea5757: read 0x%X\n", btv->c.nr, value);
4316 static int tea5757_write(struct bttv *btv, int value)
4321 gpio_inout(btv->mbox_mask, btv->mbox_clk | btv->mbox_we | btv->mbox_data);
4323 if (btv->mbox_ior) {
4324 gpio_bits(btv->mbox_ior | btv->mbox_iow | btv->mbox_csel,
4325 btv->mbox_ior | btv->mbox_iow | btv->mbox_csel);
4329 bttv_gpio_tracking(btv,"tea5757 write");
4331 dprintk("bttv%d: tea5757: write 0x%X\n", btv->c.nr, value);
4332 bus_low(btv,btv->mbox_clk);
4333 bus_high(btv,btv->mbox_we);
4334 for (i = 0; i < 25; i++) {
4335 if (reg & 0x1000000)
4336 bus_high(btv,btv->mbox_data);
4338 bus_low(btv,btv->mbox_data);
4340 bus_high(btv,btv->mbox_clk);
4342 bus_low(btv,btv->mbox_clk);
4345 bus_low(btv,btv->mbox_we); /* unmute !!! */
4349 void tea5757_set_freq(struct bttv *btv, unsigned short freq)
4351 dprintk("tea5757_set_freq %d\n",freq);
4352 tea5757_write(btv, 5 * freq + 0x358); /* add 10.7MHz (see docs) */
4355 /* RemoteVision MX (rv605) muxsel helper [Miguel Freitas]
4357 * This is needed because rv605 don't use a normal multiplex, but a crosspoint
4358 * switch instead (CD22M3494E). This IC can have multiple active connections
4359 * between Xn (input) and Yn (output) pins. We need to clear any existing
4360 * connection prior to establish a new one, pulsing the STROBE pin.
4362 * The board hardwire Y0 (xpoint) to MUX1 and MUXOUT to Yin.
4363 * GPIO pins are wired as:
4364 * GPIO[0:3] - AX[0:3] (xpoint) - P1[0:3] (microcontroller)
4365 * GPIO[4:6] - AY[0:2] (xpoint) - P1[4:6] (microcontroller)
4366 * GPIO[7] - DATA (xpoint) - P1[7] (microcontroller)
4367 * GPIO[8] - - P3[5] (microcontroller)
4368 * GPIO[9] - RESET (xpoint) - P3[6] (microcontroller)
4369 * GPIO[10] - STROBE (xpoint) - P3[7] (microcontroller)
4370 * GPINTR - - P3[4] (microcontroller)
4372 * The microcontroller is a 80C32 like. It should be possible to change xpoint
4373 * configuration either directly (as we are doing) or using the microcontroller
4374 * which is also wired to I2C interface. I have no further info on the
4375 * microcontroller features, one would need to disassembly the firmware.
4376 * note: the vendor refused to give any information on this product, all
4377 * that stuff was found using a multimeter! :)
4379 static void rv605_muxsel(struct bttv *btv, unsigned int input)
4381 static const u8 muxgpio[] = { 0x3, 0x1, 0x2, 0x4, 0xf, 0x7, 0xe, 0x0,
4382 0xd, 0xb, 0xc, 0x6, 0x9, 0x5, 0x8, 0xa };
4384 gpio_bits(0x07f, muxgpio[input]);
4386 /* reset all conections */
4387 gpio_bits(0x200,0x200);
4389 gpio_bits(0x200,0x000);
4392 /* create a new connection */
4393 gpio_bits(0x480,0x480);
4395 gpio_bits(0x480,0x080);
4399 /* Tibet Systems 'Progress DVR' CS16 muxsel helper [Chris Fanning]
4401 * The CS16 (available on eBay cheap) is a PCI board with four Fusion
4402 * 878A chips, a PCI bridge, an Atmel microcontroller, four sync seperator
4403 * chips, ten eight input analog multiplexors, a not chip and a few
4406 * 16 inputs on a secondary bracket are provided and can be selected
4407 * from each of the four capture chips. Two of the eight input
4408 * multiplexors are used to select from any of the 16 input signals.
4410 * Unsupported hardware capabilities:
4411 * . A video output monitor on the secondary bracket can be selected from
4412 * one of the 878A chips.
4413 * . Another passthrough but I haven't spent any time investigating it.
4414 * . Digital I/O (logic level connected to GPIO) is available from an
4417 * The on chip input mux should always be set to 2.
4418 * GPIO[16:19] - Video input selection
4419 * GPIO[0:3] - Video output monitor select (only available from one 878A)
4420 * GPIO[?:?] - Digital I/O.
4422 * There is an ATMEL microcontroller with an 8031 core on board. I have not
4423 * determined what function (if any) it provides. With the microcontroller
4424 * and sync seperator chips a guess is that it might have to do with video
4425 * switching and maybe some digital I/O.
4427 static void tibetCS16_muxsel(struct bttv *btv, unsigned int input)
4430 gpio_bits(0x0f0000, input << 16);
4433 static void tibetCS16_init(struct bttv *btv)
4435 /* enable gpio bits, mask obtained via btSpy */
4436 gpio_inout(0xffffff, 0x0f7fff);
4437 gpio_write(0x0f7fff);
4441 * The following routines for the Kodicom-4400r get a little mind-twisting.
4442 * There is a "master" controller and three "slave" controllers, together
4443 * an analog switch which connects any of 16 cameras to any of the BT87A's.
4444 * The analog switch is controlled by the "master", but the detection order
4445 * of the four BT878A chips is in an order which I just don't understand.
4446 * The "master" is actually the second controller to be detected. The
4447 * logic on the board uses logical numbers for the 4 controllers, but
4448 * those numbers are different from the detection sequence. When working
4449 * with the analog switch, we need to "map" from the detection sequence
4450 * over to the board's logical controller number. This mapping sequence
4451 * is {3, 0, 2, 1}, i.e. the first controller to be detected is logical
4452 * unit 3, the second (which is the master) is logical unit 0, etc.
4453 * We need to maintain the status of the analog switch (which of the 16
4454 * cameras is connected to which of the 4 controllers). Rather than
4455 * add to the bttv structure for this, we use the data reserved for
4456 * the mbox (unused for this card type).
4460 * First a routine to set the analog switch, which controls which camera
4461 * is routed to which controller. The switch comprises an X-address
4462 * (gpio bits 0-3, representing the camera, ranging from 0-15), and a
4463 * Y-address (gpio bits 4-6, representing the controller, ranging from 0-3).
4464 * A data value (gpio bit 7) of '1' enables the switch, and '0' disables
4465 * the switch. A STROBE bit (gpio bit 8) latches the data value into the
4466 * specified address. The idea is to set the address and data, then bring
4467 * STROBE high, and finally bring STROBE back to low.
4469 static void kodicom4400r_write(struct bttv *btv,
4470 unsigned char xaddr,
4471 unsigned char yaddr,
4472 unsigned char data) {
4475 udata = (data << 7) | ((yaddr&3) << 4) | (xaddr&0xf);
4476 gpio_bits(0x1ff, udata); /* write ADDR and DAT */
4477 gpio_bits(0x1ff, udata | (1 << 8)); /* strobe high */
4478 gpio_bits(0x1ff, udata); /* strobe low */
4482 * Next the mux select. Both the "master" and "slave" 'cards' (controllers)
4483 * use this routine. The routine finds the "master" for the card, maps
4484 * the controller number from the detected position over to the logical
4485 * number, writes the appropriate data to the analog switch, and housekeeps
4486 * the local copy of the switch information. The parameter 'input' is the
4487 * requested camera number (0 - 15).
4489 static void kodicom4400r_muxsel(struct bttv *btv, unsigned int input)
4494 static unsigned char map[4] = {3, 0, 2, 1};
4496 mctlr = master[btv->c.nr];
4497 if (mctlr == NULL) { /* ignore if master not yet detected */
4500 yaddr = (btv->c.nr - mctlr->c.nr + 1) & 3; /* the '&' is for safety */
4502 sw_status = (char *)(&mctlr->mbox_we);
4503 xaddr = input & 0xf;
4504 /* Check if the controller/camera pair has changed, else ignore */
4505 if (sw_status[yaddr] != xaddr)
4507 /* "open" the old switch, "close" the new one, save the new */
4508 kodicom4400r_write(mctlr, sw_status[yaddr], yaddr, 0);
4509 sw_status[yaddr] = xaddr;
4510 kodicom4400r_write(mctlr, xaddr, yaddr, 1);
4515 * During initialisation, we need to reset the analog switch. We
4516 * also preset the switch to map the 4 connectors on the card to the
4517 * *user's* (see above description of kodicom4400r_muxsel) channels
4520 static void kodicom4400r_init(struct bttv *btv)
4522 char *sw_status = (char *)(&btv->mbox_we);
4525 gpio_inout(0x0003ff, 0x0003ff);
4526 gpio_write(1 << 9); /* reset MUX */
4528 /* Preset camera 0 to the 4 controllers */
4529 for (ix = 0; ix < 4; ix++) {
4531 kodicom4400r_write(btv, ix, ix, 1);
4534 * Since this is the "master", we need to set up the
4535 * other three controller chips' pointers to this structure
4536 * for later use in the muxsel routine.
4538 if ((btv->c.nr<1) || (btv->c.nr>BTTV_MAX-3))
4540 master[btv->c.nr-1] = btv;
4541 master[btv->c.nr] = btv;
4542 master[btv->c.nr+1] = btv;
4543 master[btv->c.nr+2] = btv;
4546 /* The Grandtec X-Guard framegrabber card uses two Dual 4-channel
4547 * video multiplexers to provide up to 16 video inputs. These
4548 * multiplexers are controlled by the lower 8 GPIO pins of the
4549 * bt878. The multiplexers probably Pericom PI5V331Q or similar.
4551 * xxx0 is pin xxx of multiplexer U5,
4552 * yyy1 is pin yyy of multiplexer U2
4564 static void xguard_muxsel(struct bttv *btv, unsigned int input)
4566 static const int masks[] = {
4567 ENB0, ENB0|IN00, ENB0|IN10, ENB0|IN00|IN10,
4568 ENA0, ENA0|IN00, ENA0|IN10, ENA0|IN00|IN10,
4569 ENB1, ENB1|IN01, ENB1|IN11, ENB1|IN01|IN11,
4570 ENA1, ENA1|IN01, ENA1|IN11, ENA1|IN01|IN11,
4572 gpio_write(masks[input%16]);
4574 static void picolo_tetra_init(struct bttv *btv)
4576 /*This is the video input redirection fonctionality : I DID NOT USED IT. */
4577 btwrite (0x08<<16,BT848_GPIO_DATA);/*GPIO[19] [==> 4053 B+C] set to 1 */
4578 btwrite (0x04<<16,BT848_GPIO_DATA);/*GPIO[18] [==> 4053 A] set to 1*/
4580 static void picolo_tetra_muxsel (struct bttv* btv, unsigned int input)
4583 dprintk (KERN_DEBUG "bttv%d : picolo_tetra_muxsel => input = %d\n",btv->c.nr,input);
4584 /*Just set the right path in the analog multiplexers : channel 1 -> 4 ==> Analog Mux ==> MUX0*/
4585 /*GPIO[20]&GPIO[21] used to choose the right input*/
4586 btwrite (input<<20,BT848_GPIO_DATA);
4591 * ivc120_muxsel [Added by Alan Garfield <alan@fromorbit.com>]
4593 * The IVC120G security card has 4 i2c controlled TDA8540 matrix
4594 * swichers to provide 16 channels to MUX0. The TDA8540's have
4595 * 4 independent outputs and as such the IVC120G also has the
4596 * optional "Monitor Out" bus. This allows the card to be looking
4597 * at one input while the monitor is looking at another.
4599 * Since I've couldn't be bothered figuring out how to add an
4600 * independant muxsel for the monitor bus, I've just set it to
4601 * whatever the card is looking at.
4603 * OUT0 of the TDA8540's is connected to MUX0 (0x03)
4604 * OUT1 of the TDA8540's is connected to "Monitor Out" (0x0C)
4606 * TDA8540_ALT3 IN0-3 = Channel 13 - 16 (0x03)
4607 * TDA8540_ALT4 IN0-3 = Channel 1 - 4 (0x03)
4608 * TDA8540_ALT5 IN0-3 = Channel 5 - 8 (0x03)
4609 * TDA8540_ALT6 IN0-3 = Channel 9 - 12 (0x03)
4613 /* All 7 possible sub-ids for the TDA8540 Matrix Switcher */
4614 #define I2C_TDA8540 0x90
4615 #define I2C_TDA8540_ALT1 0x92
4616 #define I2C_TDA8540_ALT2 0x94
4617 #define I2C_TDA8540_ALT3 0x96
4618 #define I2C_TDA8540_ALT4 0x98
4619 #define I2C_TDA8540_ALT5 0x9a
4620 #define I2C_TDA8540_ALT6 0x9c
4622 static void ivc120_muxsel(struct bttv *btv, unsigned int input)
4625 int key = input % 4;
4626 int matrix = input / 4;
4628 dprintk("bttv%d: ivc120_muxsel: Input - %02d | TDA - %02d | In - %02d\n",
4629 btv->c.nr, input, matrix, key);
4631 /* Handles the input selection on the TDA8540's */
4632 bttv_I2CWrite(btv, I2C_TDA8540_ALT3, 0x00,
4633 ((matrix == 3) ? (key | key << 2) : 0x00), 1);
4634 bttv_I2CWrite(btv, I2C_TDA8540_ALT4, 0x00,
4635 ((matrix == 0) ? (key | key << 2) : 0x00), 1);
4636 bttv_I2CWrite(btv, I2C_TDA8540_ALT5, 0x00,
4637 ((matrix == 1) ? (key | key << 2) : 0x00), 1);
4638 bttv_I2CWrite(btv, I2C_TDA8540_ALT6, 0x00,
4639 ((matrix == 2) ? (key | key << 2) : 0x00), 1);
4641 /* Handles the output enables on the TDA8540's */
4642 bttv_I2CWrite(btv, I2C_TDA8540_ALT3, 0x02,
4643 ((matrix == 3) ? 0x03 : 0x00), 1); /* 13 - 16 */
4644 bttv_I2CWrite(btv, I2C_TDA8540_ALT4, 0x02,
4645 ((matrix == 0) ? 0x03 : 0x00), 1); /* 1-4 */
4646 bttv_I2CWrite(btv, I2C_TDA8540_ALT5, 0x02,
4647 ((matrix == 1) ? 0x03 : 0x00), 1); /* 5-8 */
4648 bttv_I2CWrite(btv, I2C_TDA8540_ALT6, 0x02,
4649 ((matrix == 2) ? 0x03 : 0x00), 1); /* 9-12 */
4651 /* 878's MUX0 is already selected for input via muxsel values */
4655 /* PXC200 muxsel helper
4656 * luke@syseng.anu.edu.au
4657 * another transplant
4658 * from Alessandro Rubini (rubini@linux.it)
4660 * There are 4 kinds of cards:
4661 * PXC200L which is bt848
4662 * PXC200F which is bt848 with PIC controlling mux
4663 * PXC200AL which is bt878
4664 * PXC200AF which is bt878 with PIC controlling mux
4666 #define PX_CFG_PXC200F 0x01
4667 #define PX_FLAG_PXC200A 0x00001000 /* a pxc200A is bt-878 based */
4668 #define PX_I2C_PIC 0x0f
4669 #define PX_PXC200A_CARDID 0x200a1295
4670 #define PX_I2C_CMD_CFG 0x00
4672 static void PXC200_muxsel(struct bttv *btv, unsigned int input)
4677 unsigned char buf[2];
4679 /* Read PIC config to determine if this is a PXC200F */
4683 rc=bttv_I2CWrite(btv,(PX_I2C_PIC<<1),buf[0],buf[1],1);
4685 printk(KERN_DEBUG "bttv%d: PXC200_muxsel: pic cfg write failed:%d\n", btv->c.nr,rc);
4686 /* not PXC ? do nothing */
4690 rc=bttv_I2CRead(btv,(PX_I2C_PIC<<1),NULL);
4691 if (!(rc & PX_CFG_PXC200F)) {
4692 printk(KERN_DEBUG "bttv%d: PXC200_muxsel: not PXC200F rc:%d \n", btv->c.nr,rc);
4697 /* The multiplexer in the 200F is handled by the GPIO port */
4698 /* get correct mapping between inputs */
4699 /* mux = bttv_tvcards[btv->type].muxsel[input] & 3; */
4700 /* ** not needed!? */
4703 /* make sure output pins are enabled */
4704 /* bitmask=0x30f; */
4706 /* check whether we have a PXC200A */
4707 if (btv->cardid == PX_PXC200A_CARDID) {
4708 bitmask ^= 0x180; /* use 7 and 9, not 8 and 9 */
4709 bitmask |= 7<<4; /* the DAC */
4711 btwrite(bitmask, BT848_GPIO_OUT_EN);
4713 bitmask = btread(BT848_GPIO_DATA);
4714 if (btv->cardid == PX_PXC200A_CARDID)
4715 bitmask = (bitmask & ~0x280) | ((mux & 2) << 8) | ((mux & 1) << 7);
4716 else /* older device */
4717 bitmask = (bitmask & ~0x300) | ((mux & 3) << 8);
4718 btwrite(bitmask,BT848_GPIO_DATA);
4721 * Was "to be safe, set the bt848 to input 0"
4722 * Actually, since it's ok at load time, better not messing
4723 * with these bits (on PXC200AF you need to set mux 2 here)
4725 * needed because bttv-driver sets mux before calling this function
4727 if (btv->cardid == PX_PXC200A_CARDID)
4728 btaor(2<<5, ~BT848_IFORM_MUXSEL, BT848_IFORM);
4729 else /* older device */
4730 btand(~BT848_IFORM_MUXSEL,BT848_IFORM);
4732 printk(KERN_DEBUG "bttv%d: setting input channel to:%d\n", btv->c.nr,(int)mux);
4735 static void phytec_muxsel(struct bttv *btv, unsigned int input)
4737 unsigned int mux = input % 4;
4739 if (input == btv->svhs)
4742 gpio_bits(0x3, mux);
4746 * GeoVision GV-800(S) functions
4747 * Bruno Christo <bchristo@inf.ufsm.br>
4750 /* This is a function to control the analog switch, which determines which
4751 * camera is routed to which controller. The switch comprises an X-address
4752 * (gpio bits 0-3, representing the camera, ranging from 0-15), and a
4753 * Y-address (gpio bits 4-6, representing the controller, ranging from 0-3).
4754 * A data value (gpio bit 18) of '1' enables the switch, and '0' disables
4755 * the switch. A STROBE bit (gpio bit 17) latches the data value into the
4756 * specified address. There is also a chip select (gpio bit 16).
4757 * The idea is to set the address and chip select together, bring
4758 * STROBE high, write the data, and finally bring STROBE back to low.
4760 static void gv800s_write(struct bttv *btv,
4761 unsigned char xaddr,
4762 unsigned char yaddr,
4763 unsigned char data) {
4764 /* On the "master" 878A:
4765 * GPIO bits 0-9 are used for the analog switch:
4766 * 00 - 03: camera selector
4767 * 04 - 06: 878A (controller) selector
4770 * 18: data (1->on, 0->off)
4773 const u32 ADDRESS = ((xaddr&0xf) | (yaddr&3)<<4);
4774 const u32 CSELECT = 1<<16;
4775 const u32 STROBE = 1<<17;
4776 const u32 DATA = data<<18;
4778 gpio_bits(0x1007f, ADDRESS | CSELECT); /* write ADDRESS and CSELECT */
4779 gpio_bits(0x20000, STROBE); /* STROBE high */
4780 gpio_bits(0x40000, DATA); /* write DATA */
4781 gpio_bits(0x20000, ~STROBE); /* STROBE low */
4785 * GeoVision GV-800(S) muxsel
4787 * Each of the 4 cards (controllers) use this function.
4788 * The controller using this function selects the input through the GPIO pins
4789 * of the "master" card. A pointer to this card is stored in master[btv->c.nr].
4791 * The parameter 'input' is the requested camera number (0-4) on the controller.
4792 * The map array has the address of each input. Note that the addresses in the
4793 * array are in the sequence the original GeoVision driver uses, that is, set
4794 * every controller to input 0, then to input 1, 2, 3, repeat. This means that
4795 * the physical "camera 1" connector corresponds to controller 0 input 0,
4796 * "camera 2" corresponds to controller 1 input 0, and so on.
4798 * After getting the input address, the function then writes the appropriate
4799 * data to the analog switch, and housekeeps the local copy of the switch
4802 static void gv800s_muxsel(struct bttv *btv, unsigned int input)
4807 static unsigned int map[4][4] = { { 0x0, 0x4, 0xa, 0x6 },
4808 { 0x1, 0x5, 0xb, 0x7 },
4809 { 0x2, 0x8, 0xc, 0xe },
4810 { 0x3, 0x9, 0xd, 0xf } };
4812 mctlr = master[btv->c.nr];
4813 if (mctlr == NULL) {
4814 /* do nothing until the "master" is detected */
4817 yaddr = (btv->c.nr - mctlr->c.nr) & 3;
4818 sw_status = (char *)(&mctlr->mbox_we);
4819 xaddr = map[yaddr][input] & 0xf;
4821 /* Check if the controller/camera pair has changed, ignore otherwise */
4822 if (sw_status[yaddr] != xaddr) {
4823 /* disable the old switch, enable the new one and save status */
4824 gv800s_write(mctlr, sw_status[yaddr], yaddr, 0);
4825 sw_status[yaddr] = xaddr;
4826 gv800s_write(mctlr, xaddr, yaddr, 1);
4830 /* GeoVision GV-800(S) "master" chip init */
4831 static void gv800s_init(struct bttv *btv)
4833 char *sw_status = (char *)(&btv->mbox_we);
4836 gpio_inout(0xf107f, 0xf107f);
4837 gpio_write(1<<19); /* reset the analog MUX */
4840 /* Preset camera 0 to the 4 controllers */
4841 for (ix = 0; ix < 4; ix++) {
4843 gv800s_write(btv, ix, ix, 1);
4846 /* Inputs on the "master" controller need this brightness fix */
4847 bttv_I2CWrite(btv, 0x18, 0x5, 0x90, 1);
4849 if (btv->c.nr > BTTV_MAX-4)
4852 * Store the "master" controller pointer in the master
4853 * array for later use in the muxsel function.
4855 master[btv->c.nr] = btv;
4856 master[btv->c.nr+1] = btv;
4857 master[btv->c.nr+2] = btv;
4858 master[btv->c.nr+3] = btv;
4861 /* ----------------------------------------------------------------------- */
4862 /* motherboard chipset specific stuff */
4864 void __init bttv_check_chipset(void)
4866 int pcipci_fail = 0;
4867 struct pci_dev *dev = NULL;
4869 if (pci_pci_problems & (PCIPCI_FAIL|PCIAGP_FAIL)) /* should check if target is AGP */
4871 if (pci_pci_problems & (PCIPCI_TRITON|PCIPCI_NATOMA|PCIPCI_VIAETBF))
4873 if (pci_pci_problems & PCIPCI_VSFX)
4875 #ifdef PCIPCI_ALIMAGIK
4876 if (pci_pci_problems & PCIPCI_ALIMAGIK)
4881 /* print warnings about any quirks found */
4883 printk(KERN_INFO "bttv: Host bridge needs ETBF enabled.\n");
4885 printk(KERN_INFO "bttv: Host bridge needs VSFX enabled.\n");
4887 printk(KERN_INFO "bttv: bttv and your chipset may not work "
4890 printk(KERN_INFO "bttv: overlay will be disabled.\n");
4893 printk(KERN_INFO "bttv: overlay forced. Use this "
4894 "option at your own risk.\n");
4897 if (UNSET != latency)
4898 printk(KERN_INFO "bttv: pci latency fixup [%d]\n",latency);
4899 while ((dev = pci_get_device(PCI_VENDOR_ID_INTEL,
4900 PCI_DEVICE_ID_INTEL_82441, dev))) {
4902 pci_read_config_byte(dev, 0x53, &b);
4904 printk(KERN_INFO "bttv: Host bridge: 82441FX Natoma, "
4905 "bufcon=0x%02x\n",b);
4909 int __devinit bttv_handle_chipset(struct bttv *btv)
4911 unsigned char command;
4913 if (!triton1 && !vsfx && UNSET == latency)
4918 printk(KERN_INFO "bttv%d: enabling ETBF (430FX/VP3 compatibilty)\n",btv->c.nr);
4919 if (vsfx && btv->id >= 878)
4920 printk(KERN_INFO "bttv%d: enabling VSFX\n",btv->c.nr);
4921 if (UNSET != latency)
4922 printk(KERN_INFO "bttv%d: setting pci timer to %d\n",
4926 if (btv->id < 878) {
4927 /* bt848 (mis)uses a bit in the irq mask for etbf */
4929 btv->triton1 = BT848_INT_ETBF;
4931 /* bt878 has a bit in the pci config space for it */
4932 pci_read_config_byte(btv->c.pci, BT878_DEVCTRL, &command);
4934 command |= BT878_EN_TBFX;
4936 command |= BT878_EN_VSFX;
4937 pci_write_config_byte(btv->c.pci, BT878_DEVCTRL, command);
4939 if (UNSET != latency)
4940 pci_write_config_byte(btv->c.pci, PCI_LATENCY_TIMER, latency);
projects / linux-2.6 / blob