git.oblomov.eu Git - linux-2.6/blob - drivers/net/3c505.c

   1 /*
   2  * Linux Ethernet device driver for the 3Com Etherlink Plus (3C505)
   3  *      By Craig Southeren, Juha Laiho and Philip Blundell
   4  *
   5  * 3c505.c      This module implements an interface to the 3Com
   6  *              Etherlink Plus (3c505) Ethernet card. Linux device
   7  *              driver interface reverse engineered from the Linux 3C509
   8  *              device drivers. Some 3C505 information gleaned from
   9  *              the Crynwr packet driver. Still this driver would not
  10  *              be here without 3C505 technical reference provided by
  11  *              3Com.
  12  *
  13  * $Id: 3c505.c,v 1.10 1996/04/16 13:06:27 phil Exp $
  14  *
  15  * Authors:     Linux 3c505 device driver by
  16  *                      Craig Southeren, <craigs@ineluki.apana.org.au>
  17  *              Final debugging by
  18  *                      Andrew Tridgell, <tridge@nimbus.anu.edu.au>
  19  *              Auto irq/address, tuning, cleanup and v1.1.4+ kernel mods by
  20  *                      Juha Laiho, <jlaiho@ichaos.nullnet.fi>
  21  *              Linux 3C509 driver by
  22  *                      Donald Becker, <becker@super.org>
  23  *                      (Now at <becker@scyld.com>)
  24  *              Crynwr packet driver by
  25  *                      Krishnan Gopalan and Gregg Stefancik,
  26  *                      Clemson University Engineering Computer Operations.
  27  *                      Portions of the code have been adapted from the 3c505
  28  *                         driver for NCSA Telnet by Bruce Orchard and later
  29  *                         modified by Warren Van Houten and krus@diku.dk.
  30  *              3C505 technical information provided by
  31  *                      Terry Murphy, of 3Com Network Adapter Division
  32  *              Linux 1.3.0 changes by
  33  *                      Alan Cox <Alan.Cox@linux.org>
  34  *              More debugging, DMA support, currently maintained by
  35  *                      Philip Blundell <philb@gnu.org>
  36  *              Multicard/soft configurable dma channel/rev 2 hardware support
  37  *                      by Christopher Collins <ccollins@pcug.org.au>
  38  *              Ethtool support (jgarzik), 11/17/2001
  39  */
  40
  41 #define DRV_NAME        "3c505"
  42 #define DRV_VERSION     "1.10a"
  43
  44
  45 /* Theory of operation:
  46  *
  47  * The 3c505 is quite an intelligent board.  All communication with it is done
  48  * by means of Primary Command Blocks (PCBs); these are transferred using PIO
  49  * through the command register.  The card has 256k of on-board RAM, which is
  50  * used to buffer received packets.  It might seem at first that more buffers
  51  * are better, but in fact this isn't true.  From my tests, it seems that
  52  * more than about 10 buffers are unnecessary, and there is a noticeable
  53  * performance hit in having more active on the card.  So the majority of the
  54  * card's memory isn't, in fact, used.  Sadly, the card only has one transmit
  55  * buffer and, short of loading our own firmware into it (which is what some
  56  * drivers resort to) there's nothing we can do about this.
  57  *
  58  * We keep up to 4 "receive packet" commands active on the board at a time.
  59  * When a packet comes in, so long as there is a receive command active, the
  60  * board will send us a "packet received" PCB and then add the data for that
  61  * packet to the DMA queue.  If a DMA transfer is not already in progress, we
  62  * set one up to start uploading the data.  We have to maintain a list of
  63  * backlogged receive packets, because the card may decide to tell us about
  64  * a newly-arrived packet at any time, and we may not be able to start a DMA
  65  * transfer immediately (ie one may already be going on).  We can't NAK the
  66  * PCB, because then it would throw the packet away.
  67  *
  68  * Trying to send a PCB to the card at the wrong moment seems to have bad
  69  * effects.  If we send it a transmit PCB while a receive DMA is happening,
  70  * it will just NAK the PCB and so we will have wasted our time.  Worse, it
  71  * sometimes seems to interrupt the transfer.  The majority of the low-level
  72  * code is protected by one huge semaphore -- "busy" -- which is set whenever
  73  * it probably isn't safe to do anything to the card.  The receive routine
  74  * must gain a lock on "busy" before it can start a DMA transfer, and the
  75  * transmit routine must gain a lock before it sends the first PCB to the card.
  76  * The send_pcb() routine also has an internal semaphore to protect it against
  77  * being re-entered (which would be disastrous) -- this is needed because
  78  * several things can happen asynchronously (re-priming the receiver and
  79  * asking the card for statistics, for example).  send_pcb() will also refuse
  80  * to talk to the card at all if a DMA upload is happening.  The higher-level
  81  * networking code will reschedule a later retry if some part of the driver
  82  * is blocked.  In practice, this doesn't seem to happen very often.
  83  */
  84
  85 /* This driver may now work with revision 2.x hardware, since all the read
  86  * operations on the HCR have been removed (we now keep our own softcopy).
  87  * But I don't have an old card to test it on.
  88  *
  89  * This has had the bad effect that the autoprobe routine is now a bit
  90  * less friendly to other devices.  However, it was never very good.
  91  * before, so I doubt it will hurt anybody.
  92  */
  93
  94 /* The driver is a mess.  I took Craig's and Juha's code, and hacked it firstly
  95  * to make it more reliable, and secondly to add DMA mode.  Many things could
  96  * probably be done better; the concurrency protection is particularly awful.
  97  */
  98
  99 #include <linux/module.h>
 100 #include <linux/kernel.h>
 101 #include <linux/string.h>
 102 #include <linux/interrupt.h>
 103 #include <linux/errno.h>
 104 #include <linux/in.h>
 105 #include <linux/slab.h>
 106 #include <linux/ioport.h>
 107 #include <linux/spinlock.h>
 108 #include <linux/ethtool.h>
 109 #include <linux/delay.h>
 110 #include <linux/bitops.h>
 111
 112 #include <asm/uaccess.h>
 113 #include <asm/io.h>
 114 #include <asm/dma.h>
 115
 116 #include <linux/netdevice.h>
 117 #include <linux/etherdevice.h>
 118 #include <linux/skbuff.h>
 119 #include <linux/init.h>
 120
 121 #include "3c505.h"
 122
 123 /*********************************************************
 124  *
 125  *  define debug messages here as common strings to reduce space
 126  *
 127  *********************************************************/
 128
 129 static const char filename[] = __FILE__;
 130
 131 static const char timeout_msg[] = "*** timeout at %s:%s (line %d) ***\n";
 132 #define TIMEOUT_MSG(lineno) \
 133         printk(timeout_msg, filename,__func__,(lineno))
 134
 135 static const char invalid_pcb_msg[] =
 136 "*** invalid pcb length %d at %s:%s (line %d) ***\n";
 137 #define INVALID_PCB_MSG(len) \
 138         printk(invalid_pcb_msg, (len),filename,__func__,__LINE__)
 139
 140 static char search_msg[] __initdata = KERN_INFO "%s: Looking for 3c505 adapter at address %#x...";
 141
 142 static char stilllooking_msg[] __initdata = "still looking...";
 143
 144 static char found_msg[] __initdata = "found.\n";
 145
 146 static char notfound_msg[] __initdata = "not found (reason = %d)\n";
 147
 148 static char couldnot_msg[] __initdata = KERN_INFO "%s: 3c505 not found\n";
 149
 150 /*********************************************************
 151  *
 152  *  various other debug stuff
 153  *
 154  *********************************************************/
 155
 156 #ifdef ELP_DEBUG
 157 static int elp_debug = ELP_DEBUG;
 158 #else
 159 static int elp_debug;
 160 #endif
 161 #define debug elp_debug
 162
 163 /*
 164  *  0 = no messages (well, some)
 165  *  1 = messages when high level commands performed
 166  *  2 = messages when low level commands performed
 167  *  3 = messages when interrupts received
 168  */
 169
 170 /*****************************************************************
 171  *
 172  * List of I/O-addresses we try to auto-sense
 173  * Last element MUST BE 0!
 174  *****************************************************************/
 175
 176 static int addr_list[] __initdata = {0x300, 0x280, 0x310, 0};
 177
 178 /* Dma Memory related stuff */
 179
 180 static unsigned long dma_mem_alloc(int size)
 181 {
 182         int order = get_order(size);
 183         return __get_dma_pages(GFP_KERNEL, order);
 184 }
 185
 186
 187 /*****************************************************************
 188  *
 189  * Functions for I/O (note the inline !)
 190  *
 191  *****************************************************************/
 192
 193 static inline unsigned char inb_status(unsigned int base_addr)
 194 {
 195         return inb(base_addr + PORT_STATUS);
 196 }
 197
 198 static inline int inb_command(unsigned int base_addr)
 199 {
 200         return inb(base_addr + PORT_COMMAND);
 201 }
 202
 203 static inline void outb_control(unsigned char val, struct net_device *dev)
 204 {
 205         outb(val, dev->base_addr + PORT_CONTROL);
 206         ((elp_device *)(netdev_priv(dev)))->hcr_val = val;
 207 }
 208
 209 #define HCR_VAL(x)   (((elp_device *)(netdev_priv(x)))->hcr_val)
 210
 211 static inline void outb_command(unsigned char val, unsigned int base_addr)
 212 {
 213         outb(val, base_addr + PORT_COMMAND);
 214 }
 215
 216 static inline unsigned int backlog_next(unsigned int n)
 217 {
 218         return (n + 1) % BACKLOG_SIZE;
 219 }
 220
 221 /*****************************************************************
 222  *
 223  *  useful functions for accessing the adapter
 224  *
 225  *****************************************************************/
 226
 227 /*
 228  * use this routine when accessing the ASF bits as they are
 229  * changed asynchronously by the adapter
 230  */
 231
 232 /* get adapter PCB status */
 233 #define GET_ASF(addr) \
 234         (get_status(addr)&ASF_PCB_MASK)
 235
 236 static inline int get_status(unsigned int base_addr)
 237 {
 238         unsigned long timeout = jiffies + 10*HZ/100;
 239         register int stat1;
 240         do {
 241                 stat1 = inb_status(base_addr);
 242         } while (stat1 != inb_status(base_addr) && time_before(jiffies, timeout));
 243         if (time_after_eq(jiffies, timeout))
 244                 TIMEOUT_MSG(__LINE__);
 245         return stat1;
 246 }
 247
 248 static inline void set_hsf(struct net_device *dev, int hsf)
 249 {
 250         elp_device *adapter = netdev_priv(dev);
 251         unsigned long flags;
 252
 253         spin_lock_irqsave(&adapter->lock, flags);
 254         outb_control((HCR_VAL(dev) & ~HSF_PCB_MASK) | hsf, dev);
 255         spin_unlock_irqrestore(&adapter->lock, flags);
 256 }
 257
 258 static bool start_receive(struct net_device *, pcb_struct *);
 259
 260 static inline void adapter_reset(struct net_device *dev)
 261 {
 262         unsigned long timeout;
 263         elp_device *adapter = netdev_priv(dev);
 264         unsigned char orig_hcr = adapter->hcr_val;
 265
 266         outb_control(0, dev);
 267
 268         if (inb_status(dev->base_addr) & ACRF) {
 269                 do {
 270                         inb_command(dev->base_addr);
 271                         timeout = jiffies + 2*HZ/100;
 272                         while (time_before_eq(jiffies, timeout) && !(inb_status(dev->base_addr) & ACRF));
 273                 } while (inb_status(dev->base_addr) & ACRF);
 274                 set_hsf(dev, HSF_PCB_NAK);
 275         }
 276         outb_control(adapter->hcr_val | ATTN | DIR, dev);
 277         mdelay(10);
 278         outb_control(adapter->hcr_val & ~ATTN, dev);
 279         mdelay(10);
 280         outb_control(adapter->hcr_val | FLSH, dev);
 281         mdelay(10);
 282         outb_control(adapter->hcr_val & ~FLSH, dev);
 283         mdelay(10);
 284
 285         outb_control(orig_hcr, dev);
 286         if (!start_receive(dev, &adapter->tx_pcb))
 287                 printk(KERN_ERR "%s: start receive command failed \n", dev->name);
 288 }
 289
 290 /* Check to make sure that a DMA transfer hasn't timed out.  This should
 291  * never happen in theory, but seems to occur occasionally if the card gets
 292  * prodded at the wrong time.
 293  */
 294 static inline void check_3c505_dma(struct net_device *dev)
 295 {
 296         elp_device *adapter = netdev_priv(dev);
 297         if (adapter->dmaing && time_after(jiffies, adapter->current_dma.start_time + 10)) {
 298                 unsigned long flags, f;
 299                 printk(KERN_ERR "%s: DMA %s timed out, %d bytes left\n", dev->name, adapter->current_dma.direction ? "download" : "upload", get_dma_residue(dev->dma));
 300                 spin_lock_irqsave(&adapter->lock, flags);
 301                 adapter->dmaing = 0;
 302                 adapter->busy = 0;
 303
 304                 f=claim_dma_lock();
 305                 disable_dma(dev->dma);
 306                 release_dma_lock(f);
 307
 308                 if (adapter->rx_active)
 309                         adapter->rx_active--;
 310                 outb_control(adapter->hcr_val & ~(DMAE | TCEN | DIR), dev);
 311                 spin_unlock_irqrestore(&adapter->lock, flags);
 312         }
 313 }
 314
 315 /* Primitive functions used by send_pcb() */
 316 static inline bool send_pcb_slow(unsigned int base_addr, unsigned char byte)
 317 {
 318         unsigned long timeout;
 319         outb_command(byte, base_addr);
 320         for (timeout = jiffies + 5*HZ/100; time_before(jiffies, timeout);) {
 321                 if (inb_status(base_addr) & HCRE)
 322                         return false;
 323         }
 324         printk(KERN_WARNING "3c505: send_pcb_slow timed out\n");
 325         return true;
 326 }
 327
 328 static inline bool send_pcb_fast(unsigned int base_addr, unsigned char byte)
 329 {
 330         unsigned int timeout;
 331         outb_command(byte, base_addr);
 332         for (timeout = 0; timeout < 40000; timeout++) {
 333                 if (inb_status(base_addr) & HCRE)
 334                         return false;
 335         }
 336         printk(KERN_WARNING "3c505: send_pcb_fast timed out\n");
 337         return true;
 338 }
 339
 340 /* Check to see if the receiver needs restarting, and kick it if so */
 341 static inline void prime_rx(struct net_device *dev)
 342 {
 343         elp_device *adapter = netdev_priv(dev);
 344         while (adapter->rx_active < ELP_RX_PCBS && netif_running(dev)) {
 345                 if (!start_receive(dev, &adapter->itx_pcb))
 346                         break;
 347         }
 348 }
 349
 350 /*****************************************************************
 351  *
 352  * send_pcb
 353  *   Send a PCB to the adapter.
 354  *
 355  *      output byte to command reg  --<--+
 356  *      wait until HCRE is non zero      |
 357  *      loop until all bytes sent   -->--+
 358  *      set HSF1 and HSF2 to 1
 359  *      output pcb length
 360  *      wait until ASF give ACK or NAK
 361  *      set HSF1 and HSF2 to 0
 362  *
 363  *****************************************************************/
 364
 365 /* This can be quite slow -- the adapter is allowed to take up to 40ms
 366  * to respond to the initial interrupt.
 367  *
 368  * We run initially with interrupts turned on, but with a semaphore set
 369  * so that nobody tries to re-enter this code.  Once the first byte has
 370  * gone through, we turn interrupts off and then send the others (the
 371  * timeout is reduced to 500us).
 372  */
 373
 374 static bool send_pcb(struct net_device *dev, pcb_struct * pcb)
 375 {
 376         int i;
 377         unsigned long timeout;
 378         elp_device *adapter = netdev_priv(dev);
 379         unsigned long flags;
 380
 381         check_3c505_dma(dev);
 382
 383         if (adapter->dmaing && adapter->current_dma.direction == 0)
 384                 return false;
 385
 386         /* Avoid contention */
 387         if (test_and_set_bit(1, &adapter->send_pcb_semaphore)) {
 388                 if (elp_debug >= 3) {
 389                         printk(KERN_DEBUG "%s: send_pcb entered while threaded\n", dev->name);
 390                 }
 391                 return false;
 392         }
 393         /*
 394          * load each byte into the command register and
 395          * wait for the HCRE bit to indicate the adapter
 396          * had read the byte
 397          */
 398         set_hsf(dev, 0);
 399
 400         if (send_pcb_slow(dev->base_addr, pcb->command))
 401                 goto abort;
 402
 403         spin_lock_irqsave(&adapter->lock, flags);
 404
 405         if (send_pcb_fast(dev->base_addr, pcb->length))
 406                 goto sti_abort;
 407
 408         for (i = 0; i < pcb->length; i++) {
 409                 if (send_pcb_fast(dev->base_addr, pcb->data.raw[i]))
 410                         goto sti_abort;
 411         }
 412
 413         outb_control(adapter->hcr_val | 3, dev);        /* signal end of PCB */
 414         outb_command(2 + pcb->length, dev->base_addr);
 415
 416         /* now wait for the acknowledgement */
 417         spin_unlock_irqrestore(&adapter->lock, flags);
 418
 419         for (timeout = jiffies + 5*HZ/100; time_before(jiffies, timeout);) {
 420                 switch (GET_ASF(dev->base_addr)) {
 421                 case ASF_PCB_ACK:
 422                         adapter->send_pcb_semaphore = 0;
 423                         return true;
 424
 425                 case ASF_PCB_NAK:
 426 #ifdef ELP_DEBUG
 427                         printk(KERN_DEBUG "%s: send_pcb got NAK\n", dev->name);
 428 #endif
 429                         goto abort;
 430                 }
 431         }
 432
 433         if (elp_debug >= 1)
 434                 printk(KERN_DEBUG "%s: timeout waiting for PCB acknowledge (status %02x)\n", dev->name, inb_status(dev->base_addr));
 435         goto abort;
 436
 437       sti_abort:
 438         spin_unlock_irqrestore(&adapter->lock, flags);
 439       abort:
 440         adapter->send_pcb_semaphore = 0;
 441         return false;
 442 }
 443
 444
 445 /*****************************************************************
 446  *
 447  * receive_pcb
 448  *   Read a PCB from the adapter
 449  *
 450  *      wait for ACRF to be non-zero        ---<---+
 451  *      input a byte                               |
 452  *      if ASF1 and ASF2 were not both one         |
 453  *              before byte was read, loop      --->---+
 454  *      set HSF1 and HSF2 for ack
 455  *
 456  *****************************************************************/
 457
 458 static bool receive_pcb(struct net_device *dev, pcb_struct * pcb)
 459 {
 460         int i, j;
 461         int total_length;
 462         int stat;
 463         unsigned long timeout;
 464         unsigned long flags;
 465
 466         elp_device *adapter = netdev_priv(dev);
 467
 468         set_hsf(dev, 0);
 469
 470         /* get the command code */
 471         timeout = jiffies + 2*HZ/100;
 472         while (((stat = get_status(dev->base_addr)) & ACRF) == 0 && time_before(jiffies, timeout));
 473         if (time_after_eq(jiffies, timeout)) {
 474                 TIMEOUT_MSG(__LINE__);
 475                 return false;
 476         }
 477         pcb->command = inb_command(dev->base_addr);
 478
 479         /* read the data length */
 480         timeout = jiffies + 3*HZ/100;
 481         while (((stat = get_status(dev->base_addr)) & ACRF) == 0 && time_before(jiffies, timeout));
 482         if (time_after_eq(jiffies, timeout)) {
 483                 TIMEOUT_MSG(__LINE__);
 484                 printk(KERN_INFO "%s: status %02x\n", dev->name, stat);
 485                 return false;
 486         }
 487         pcb->length = inb_command(dev->base_addr);
 488
 489         if (pcb->length > MAX_PCB_DATA) {
 490                 INVALID_PCB_MSG(pcb->length);
 491                 adapter_reset(dev);
 492                 return false;
 493         }
 494         /* read the data */
 495         spin_lock_irqsave(&adapter->lock, flags);
 496         for (i = 0; i < MAX_PCB_DATA; i++) {
 497                 for (j = 0; j < 20000; j++) {
 498                         stat = get_status(dev->base_addr);
 499                         if (stat & ACRF)
 500                                 break;
 501                 }
 502                 pcb->data.raw[i] = inb_command(dev->base_addr);
 503                 if ((stat & ASF_PCB_MASK) == ASF_PCB_END || j >= 20000)
 504                         break;
 505         }
 506         spin_unlock_irqrestore(&adapter->lock, flags);
 507         if (i >= MAX_PCB_DATA) {
 508                 INVALID_PCB_MSG(i);
 509                 return false;
 510         }
 511         if (j >= 20000) {
 512                 TIMEOUT_MSG(__LINE__);
 513                 return false;
 514         }
 515         /* the last "data" byte was really the length! */
 516         total_length = pcb->data.raw[i];
 517
 518         /* safety check total length vs data length */
 519         if (total_length != (pcb->length + 2)) {
 520                 if (elp_debug >= 2)
 521                         printk(KERN_WARNING "%s: mangled PCB received\n", dev->name);
 522                 set_hsf(dev, HSF_PCB_NAK);
 523                 return false;
 524         }
 525
 526         if (pcb->command == CMD_RECEIVE_PACKET_COMPLETE) {
 527                 if (test_and_set_bit(0, (void *) &adapter->busy)) {
 528                         if (backlog_next(adapter->rx_backlog.in) == adapter->rx_backlog.out) {
 529                                 set_hsf(dev, HSF_PCB_NAK);
 530                                 printk(KERN_WARNING "%s: PCB rejected, transfer in progress and backlog full\n", dev->name);
 531                                 pcb->command = 0;
 532                                 return true;
 533                         } else {
 534                                 pcb->command = 0xff;
 535                         }
 536                 }
 537         }
 538         set_hsf(dev, HSF_PCB_ACK);
 539         return true;
 540 }
 541
 542 /******************************************************
 543  *
 544  *  queue a receive command on the adapter so we will get an
 545  *  interrupt when a packet is received.
 546  *
 547  ******************************************************/
 548
 549 static bool start_receive(struct net_device *dev, pcb_struct * tx_pcb)
 550 {
 551         bool status;
 552         elp_device *adapter = netdev_priv(dev);
 553
 554         if (elp_debug >= 3)
 555                 printk(KERN_DEBUG "%s: restarting receiver\n", dev->name);
 556         tx_pcb->command = CMD_RECEIVE_PACKET;
 557         tx_pcb->length = sizeof(struct Rcv_pkt);
 558         tx_pcb->data.rcv_pkt.buf_seg
 559             = tx_pcb->data.rcv_pkt.buf_ofs = 0;         /* Unused */
 560         tx_pcb->data.rcv_pkt.buf_len = 1600;
 561         tx_pcb->data.rcv_pkt.timeout = 0;       /* set timeout to zero */
 562         status = send_pcb(dev, tx_pcb);
 563         if (status)
 564                 adapter->rx_active++;
 565         return status;
 566 }
 567
 568 /******************************************************
 569  *
 570  * extract a packet from the adapter
 571  * this routine is only called from within the interrupt
 572  * service routine, so no cli/sti calls are needed
 573  * note that the length is always assumed to be even
 574  *
 575  ******************************************************/
 576
 577 static void receive_packet(struct net_device *dev, int len)
 578 {
 579         int rlen;
 580         elp_device *adapter = netdev_priv(dev);
 581         void *target;
 582         struct sk_buff *skb;
 583         unsigned long flags;
 584
 585         rlen = (len + 1) & ~1;
 586         skb = dev_alloc_skb(rlen + 2);
 587
 588         if (!skb) {
 589                 printk(KERN_WARNING "%s: memory squeeze, dropping packet\n", dev->name);
 590                 target = adapter->dma_buffer;
 591                 adapter->current_dma.target = NULL;
 592                 /* FIXME: stats */
 593                 return;
 594         }
 595
 596         skb_reserve(skb, 2);
 597         target = skb_put(skb, rlen);
 598         if ((unsigned long)(target + rlen) >= MAX_DMA_ADDRESS) {
 599                 adapter->current_dma.target = target;
 600                 target = adapter->dma_buffer;
 601         } else {
 602                 adapter->current_dma.target = NULL;
 603         }
 604
 605         /* if this happens, we die */
 606         if (test_and_set_bit(0, (void *) &adapter->dmaing))
 607                 printk(KERN_ERR "%s: rx blocked, DMA in progress, dir %d\n", dev->name, adapter->current_dma.direction);
 608
 609         adapter->current_dma.direction = 0;
 610         adapter->current_dma.length = rlen;
 611         adapter->current_dma.skb = skb;
 612         adapter->current_dma.start_time = jiffies;
 613
 614         outb_control(adapter->hcr_val | DIR | TCEN | DMAE, dev);
 615
 616         flags=claim_dma_lock();
 617         disable_dma(dev->dma);
 618         clear_dma_ff(dev->dma);
 619         set_dma_mode(dev->dma, 0x04);   /* dma read */
 620         set_dma_addr(dev->dma, isa_virt_to_bus(target));
 621         set_dma_count(dev->dma, rlen);
 622         enable_dma(dev->dma);
 623         release_dma_lock(flags);
 624
 625         if (elp_debug >= 3) {
 626                 printk(KERN_DEBUG "%s: rx DMA transfer started\n", dev->name);
 627         }
 628
 629         if (adapter->rx_active)
 630                 adapter->rx_active--;
 631
 632         if (!adapter->busy)
 633                 printk(KERN_WARNING "%s: receive_packet called, busy not set.\n", dev->name);
 634 }
 635
 636 /******************************************************
 637  *
 638  * interrupt handler
 639  *
 640  ******************************************************/
 641
 642 static irqreturn_t elp_interrupt(int irq, void *dev_id)
 643 {
 644         int len;
 645         int dlen;
 646         int icount = 0;
 647         struct net_device *dev = dev_id;
 648         elp_device *adapter = netdev_priv(dev);
 649         unsigned long timeout;
 650
 651         spin_lock(&adapter->lock);
 652
 653         do {
 654                 /*
 655                  * has a DMA transfer finished?
 656                  */
 657                 if (inb_status(dev->base_addr) & DONE) {
 658                         if (!adapter->dmaing) {
 659                                 printk(KERN_WARNING "%s: phantom DMA completed\n", dev->name);
 660                         }
 661                         if (elp_debug >= 3) {
 662                                 printk(KERN_DEBUG "%s: %s DMA complete, status %02x\n", dev->name, adapter->current_dma.direction ? "tx" : "rx", inb_status(dev->base_addr));
 663                         }
 664
 665                         outb_control(adapter->hcr_val & ~(DMAE | TCEN | DIR), dev);
 666                         if (adapter->current_dma.direction) {
 667                                 dev_kfree_skb_irq(adapter->current_dma.skb);
 668                         } else {
 669                                 struct sk_buff *skb = adapter->current_dma.skb;
 670                                 if (skb) {
 671                                         if (adapter->current_dma.target) {
 672                                         /* have already done the skb_put() */
 673                                         memcpy(adapter->current_dma.target, adapter->dma_buffer, adapter->current_dma.length);
 674                                         }
 675                                         skb->protocol = eth_type_trans(skb,dev);
 676                                         dev->stats.rx_bytes += skb->len;
 677                                         netif_rx(skb);
 678                                 }
 679                         }
 680                         adapter->dmaing = 0;
 681                         if (adapter->rx_backlog.in != adapter->rx_backlog.out) {
 682                                 int t = adapter->rx_backlog.length[adapter->rx_backlog.out];
 683                                 adapter->rx_backlog.out = backlog_next(adapter->rx_backlog.out);
 684                                 if (elp_debug >= 2)
 685                                         printk(KERN_DEBUG "%s: receiving backlogged packet (%d)\n", dev->name, t);
 686                                 receive_packet(dev, t);
 687                         } else {
 688                                 adapter->busy = 0;
 689                         }
 690                 } else {
 691                         /* has one timed out? */
 692                         check_3c505_dma(dev);
 693                 }
 694
 695                 /*
 696                  * receive a PCB from the adapter
 697                  */
 698                 timeout = jiffies + 3*HZ/100;
 699                 while ((inb_status(dev->base_addr) & ACRF) != 0 && time_before(jiffies, timeout)) {
 700                         if (receive_pcb(dev, &adapter->irx_pcb)) {
 701                                 switch (adapter->irx_pcb.command)
 702                                 {
 703                                 case 0:
 704                                         break;
 705                                         /*
 706                                          * received a packet - this must be handled fast
 707                                          */
 708                                 case 0xff:
 709                                 case CMD_RECEIVE_PACKET_COMPLETE:
 710                                         /* if the device isn't open, don't pass packets up the stack */
 711                                         if (!netif_running(dev))
 712                                                 break;
 713                                         len = adapter->irx_pcb.data.rcv_resp.pkt_len;
 714                                         dlen = adapter->irx_pcb.data.rcv_resp.buf_len;
 715                                         if (adapter->irx_pcb.data.rcv_resp.timeout != 0) {
 716                                                 printk(KERN_ERR "%s: interrupt - packet not received correctly\n", dev->name);
 717                                         } else {
 718                                                 if (elp_debug >= 3) {
 719                                                         printk(KERN_DEBUG "%s: interrupt - packet received of length %i (%i)\n", dev->name, len, dlen);
 720                                                 }
 721                                                 if (adapter->irx_pcb.command == 0xff) {
 722                                                         if (elp_debug >= 2)
 723                                                                 printk(KERN_DEBUG "%s: adding packet to backlog (len = %d)\n", dev->name, dlen);
 724                                                         adapter->rx_backlog.length[adapter->rx_backlog.in] = dlen;
 725                                                         adapter->rx_backlog.in = backlog_next(adapter->rx_backlog.in);
 726                                                 } else {
 727                                                         receive_packet(dev, dlen);
 728                                                 }
 729                                                 if (elp_debug >= 3)
 730                                                         printk(KERN_DEBUG "%s: packet received\n", dev->name);
 731                                         }
 732                                         break;
 733
 734                                         /*
 735                                          * 82586 configured correctly
 736                                          */
 737                                 case CMD_CONFIGURE_82586_RESPONSE:
 738                                         adapter->got[CMD_CONFIGURE_82586] = 1;
 739                                         if (elp_debug >= 3)
 740                                                 printk(KERN_DEBUG "%s: interrupt - configure response received\n", dev->name);
 741                                         break;
 742
 743                                         /*
 744                                          * Adapter memory configuration
 745                                          */
 746                                 case CMD_CONFIGURE_ADAPTER_RESPONSE:
 747                                         adapter->got[CMD_CONFIGURE_ADAPTER_MEMORY] = 1;
 748                                         if (elp_debug >= 3)
 749                                                 printk(KERN_DEBUG "%s: Adapter memory configuration %s.\n", dev->name,
 750                                                        adapter->irx_pcb.data.failed ? "failed" : "succeeded");
 751                                         break;
 752
 753                                         /*
 754                                          * Multicast list loading
 755                                          */
 756                                 case CMD_LOAD_MULTICAST_RESPONSE:
 757                                         adapter->got[CMD_LOAD_MULTICAST_LIST] = 1;
 758                                         if (elp_debug >= 3)
 759                                                 printk(KERN_DEBUG "%s: Multicast address list loading %s.\n", dev->name,
 760                                                        adapter->irx_pcb.data.failed ? "failed" : "succeeded");
 761                                         break;
 762
 763                                         /*
 764                                          * Station address setting
 765                                          */
 766                                 case CMD_SET_ADDRESS_RESPONSE:
 767                                         adapter->got[CMD_SET_STATION_ADDRESS] = 1;
 768                                         if (elp_debug >= 3)
 769                                                 printk(KERN_DEBUG "%s: Ethernet address setting %s.\n", dev->name,
 770                                                        adapter->irx_pcb.data.failed ? "failed" : "succeeded");
 771                                         break;
 772
 773
 774                                         /*
 775                                          * received board statistics
 776                                          */
 777                                 case CMD_NETWORK_STATISTICS_RESPONSE:
 778                                         dev->stats.rx_packets += adapter->irx_pcb.data.netstat.tot_recv;
 779                                         dev->stats.tx_packets += adapter->irx_pcb.data.netstat.tot_xmit;
 780                                         dev->stats.rx_crc_errors += adapter->irx_pcb.data.netstat.err_CRC;
 781                                         dev->stats.rx_frame_errors += adapter->irx_pcb.data.netstat.err_align;
 782                                         dev->stats.rx_fifo_errors += adapter->irx_pcb.data.netstat.err_ovrrun;
 783                                         dev->stats.rx_over_errors += adapter->irx_pcb.data.netstat.err_res;
 784                                         adapter->got[CMD_NETWORK_STATISTICS] = 1;
 785                                         if (elp_debug >= 3)
 786                                                 printk(KERN_DEBUG "%s: interrupt - statistics response received\n", dev->name);
 787                                         break;
 788
 789                                         /*
 790                                          * sent a packet
 791                                          */
 792                                 case CMD_TRANSMIT_PACKET_COMPLETE:
 793                                         if (elp_debug >= 3)
 794                                                 printk(KERN_DEBUG "%s: interrupt - packet sent\n", dev->name);
 795                                         if (!netif_running(dev))
 796                                                 break;
 797                                         switch (adapter->irx_pcb.data.xmit_resp.c_stat) {
 798                                         case 0xffff:
 799                                                 dev->stats.tx_aborted_errors++;
 800                                                 printk(KERN_INFO "%s: transmit timed out, network cable problem?\n", dev->name);
 801                                                 break;
 802                                         case 0xfffe:
 803                                                 dev->stats.tx_fifo_errors++;
 804                                                 printk(KERN_INFO "%s: transmit timed out, FIFO underrun\n", dev->name);
 805                                                 break;
 806                                         }
 807                                         netif_wake_queue(dev);
 808                                         break;
 809
 810                                         /*
 811                                          * some unknown PCB
 812                                          */
 813                                 default:
 814                                         printk(KERN_DEBUG "%s: unknown PCB received - %2.2x\n", dev->name, adapter->irx_pcb.command);
 815                                         break;
 816                                 }
 817                         } else {
 818                                 printk(KERN_WARNING "%s: failed to read PCB on interrupt\n", dev->name);
 819                                 adapter_reset(dev);
 820                         }
 821                 }
 822
 823         } while (icount++ < 5 && (inb_status(dev->base_addr) & (ACRF | DONE)));
 824
 825         prime_rx(dev);
 826
 827         /*
 828          * indicate no longer in interrupt routine
 829          */
 830         spin_unlock(&adapter->lock);
 831         return IRQ_HANDLED;
 832 }
 833
 834
 835 /******************************************************
 836  *
 837  * open the board
 838  *
 839  ******************************************************/
 840
 841 static int elp_open(struct net_device *dev)
 842 {
 843         elp_device *adapter = netdev_priv(dev);
 844         int retval;
 845
 846         if (elp_debug >= 3)
 847                 printk(KERN_DEBUG "%s: request to open device\n", dev->name);
 848
 849         /*
 850          * make sure we actually found the device
 851          */
 852         if (adapter == NULL) {
 853                 printk(KERN_ERR "%s: Opening a non-existent physical device\n", dev->name);
 854                 return -EAGAIN;
 855         }
 856         /*
 857          * disable interrupts on the board
 858          */
 859         outb_control(0, dev);
 860
 861         /*
 862          * clear any pending interrupts
 863          */
 864         inb_command(dev->base_addr);
 865         adapter_reset(dev);
 866
 867         /*
 868          * no receive PCBs active
 869          */
 870         adapter->rx_active = 0;
 871
 872         adapter->busy = 0;
 873         adapter->send_pcb_semaphore = 0;
 874         adapter->rx_backlog.in = 0;
 875         adapter->rx_backlog.out = 0;
 876
 877         spin_lock_init(&adapter->lock);
 878
 879         /*
 880          * install our interrupt service routine
 881          */
 882         if ((retval = request_irq(dev->irq, &elp_interrupt, 0, dev->name, dev))) {
 883                 printk(KERN_ERR "%s: could not allocate IRQ%d\n", dev->name, dev->irq);
 884                 return retval;
 885         }
 886         if ((retval = request_dma(dev->dma, dev->name))) {
 887                 free_irq(dev->irq, dev);
 888                 printk(KERN_ERR "%s: could not allocate DMA%d channel\n", dev->name, dev->dma);
 889                 return retval;
 890         }
 891         adapter->dma_buffer = (void *) dma_mem_alloc(DMA_BUFFER_SIZE);
 892         if (!adapter->dma_buffer) {
 893                 printk(KERN_ERR "%s: could not allocate DMA buffer\n", dev->name);
 894                 free_dma(dev->dma);
 895                 free_irq(dev->irq, dev);
 896                 return -ENOMEM;
 897         }
 898         adapter->dmaing = 0;
 899
 900         /*
 901          * enable interrupts on the board
 902          */
 903         outb_control(CMDE, dev);
 904
 905         /*
 906          * configure adapter memory: we need 10 multicast addresses, default==0
 907          */
 908         if (elp_debug >= 3)
 909                 printk(KERN_DEBUG "%s: sending 3c505 memory configuration command\n", dev->name);
 910         adapter->tx_pcb.command = CMD_CONFIGURE_ADAPTER_MEMORY;
 911         adapter->tx_pcb.data.memconf.cmd_q = 10;
 912         adapter->tx_pcb.data.memconf.rcv_q = 20;
 913         adapter->tx_pcb.data.memconf.mcast = 10;
 914         adapter->tx_pcb.data.memconf.frame = 20;
 915         adapter->tx_pcb.data.memconf.rcv_b = 20;
 916         adapter->tx_pcb.data.memconf.progs = 0;
 917         adapter->tx_pcb.length = sizeof(struct Memconf);
 918         adapter->got[CMD_CONFIGURE_ADAPTER_MEMORY] = 0;
 919         if (!send_pcb(dev, &adapter->tx_pcb))
 920                 printk(KERN_ERR "%s: couldn't send memory configuration command\n", dev->name);
 921         else {
 922                 unsigned long timeout = jiffies + TIMEOUT;
 923                 while (adapter->got[CMD_CONFIGURE_ADAPTER_MEMORY] == 0 && time_before(jiffies, timeout));
 924                 if (time_after_eq(jiffies, timeout))
 925                         TIMEOUT_MSG(__LINE__);
 926         }
 927
 928
 929         /*
 930          * configure adapter to receive broadcast messages and wait for response
 931          */
 932         if (elp_debug >= 3)
 933                 printk(KERN_DEBUG "%s: sending 82586 configure command\n", dev->name);
 934         adapter->tx_pcb.command = CMD_CONFIGURE_82586;
 935         adapter->tx_pcb.data.configure = NO_LOOPBACK | RECV_BROAD;
 936         adapter->tx_pcb.length = 2;
 937         adapter->got[CMD_CONFIGURE_82586] = 0;
 938         if (!send_pcb(dev, &adapter->tx_pcb))
 939                 printk(KERN_ERR "%s: couldn't send 82586 configure command\n", dev->name);
 940         else {
 941                 unsigned long timeout = jiffies + TIMEOUT;
 942                 while (adapter->got[CMD_CONFIGURE_82586] == 0 && time_before(jiffies, timeout));
 943                 if (time_after_eq(jiffies, timeout))
 944                         TIMEOUT_MSG(__LINE__);
 945         }
 946
 947         /* enable burst-mode DMA */
 948         /* outb(0x1, dev->base_addr + PORT_AUXDMA); */
 949
 950         /*
 951          * queue receive commands to provide buffering
 952          */
 953         prime_rx(dev);
 954         if (elp_debug >= 3)
 955                 printk(KERN_DEBUG "%s: %d receive PCBs active\n", dev->name, adapter->rx_active);
 956
 957         /*
 958          * device is now officially open!
 959          */
 960
 961         netif_start_queue(dev);
 962         return 0;
 963 }
 964
 965
 966 /******************************************************
 967  *
 968  * send a packet to the adapter
 969  *
 970  ******************************************************/
 971
 972 static bool send_packet(struct net_device *dev, struct sk_buff *skb)
 973 {
 974         elp_device *adapter = netdev_priv(dev);
 975         unsigned long target;
 976         unsigned long flags;
 977
 978         /*
 979          * make sure the length is even and no shorter than 60 bytes
 980          */
 981         unsigned int nlen = (((skb->len < 60) ? 60 : skb->len) + 1) & (~1);
 982
 983         if (test_and_set_bit(0, (void *) &adapter->busy)) {
 984                 if (elp_debug >= 2)
 985                         printk(KERN_DEBUG "%s: transmit blocked\n", dev->name);
 986                 return false;
 987         }
 988
 989         dev->stats.tx_bytes += nlen;
 990
 991         /*
 992          * send the adapter a transmit packet command. Ignore segment and offset
 993          * and make sure the length is even
 994          */
 995         adapter->tx_pcb.command = CMD_TRANSMIT_PACKET;
 996         adapter->tx_pcb.length = sizeof(struct Xmit_pkt);
 997         adapter->tx_pcb.data.xmit_pkt.buf_ofs
 998             = adapter->tx_pcb.data.xmit_pkt.buf_seg = 0;        /* Unused */
 999         adapter->tx_pcb.data.xmit_pkt.pkt_len = nlen;
1000
1001         if (!send_pcb(dev, &adapter->tx_pcb)) {
1002                 adapter->busy = 0;
1003                 return false;
1004         }
1005         /* if this happens, we die */
1006         if (test_and_set_bit(0, (void *) &adapter->dmaing))
1007                 printk(KERN_DEBUG "%s: tx: DMA %d in progress\n", dev->name, adapter->current_dma.direction);
1008
1009         adapter->current_dma.direction = 1;
1010         adapter->current_dma.start_time = jiffies;
1011
1012         if ((unsigned long)(skb->data + nlen) >= MAX_DMA_ADDRESS || nlen != skb->len) {
1013                 skb_copy_from_linear_data(skb, adapter->dma_buffer, nlen);
1014                 memset(adapter->dma_buffer+skb->len, 0, nlen-skb->len);
1015                 target = isa_virt_to_bus(adapter->dma_buffer);
1016         }
1017         else {
1018                 target = isa_virt_to_bus(skb->data);
1019         }
1020         adapter->current_dma.skb = skb;
1021
1022         flags=claim_dma_lock();
1023         disable_dma(dev->dma);
1024         clear_dma_ff(dev->dma);
1025         set_dma_mode(dev->dma, 0x48);   /* dma memory -> io */
1026         set_dma_addr(dev->dma, target);
1027         set_dma_count(dev->dma, nlen);
1028         outb_control(adapter->hcr_val | DMAE | TCEN, dev);
1029         enable_dma(dev->dma);
1030         release_dma_lock(flags);
1031
1032         if (elp_debug >= 3)
1033                 printk(KERN_DEBUG "%s: DMA transfer started\n", dev->name);
1034
1035         return true;
1036 }
1037
1038 /*
1039  *      The upper layer thinks we timed out
1040  */
1041
1042 static void elp_timeout(struct net_device *dev)
1043 {
1044         int stat;
1045
1046         stat = inb_status(dev->base_addr);
1047         printk(KERN_WARNING "%s: transmit timed out, lost %s?\n", dev->name, (stat & ACRF) ? "interrupt" : "command");
1048         if (elp_debug >= 1)
1049                 printk(KERN_DEBUG "%s: status %#02x\n", dev->name, stat);
1050         dev->trans_start = jiffies;
1051         dev->stats.tx_dropped++;
1052         netif_wake_queue(dev);
1053 }
1054
1055 /******************************************************
1056  *
1057  * start the transmitter
1058  *    return 0 if sent OK, else return 1
1059  *
1060  ******************************************************/
1061
1062 static int elp_start_xmit(struct sk_buff *skb, struct net_device *dev)
1063 {
1064         unsigned long flags;
1065         elp_device *adapter = netdev_priv(dev);
1066
1067         spin_lock_irqsave(&adapter->lock, flags);
1068         check_3c505_dma(dev);
1069
1070         if (elp_debug >= 3)
1071                 printk(KERN_DEBUG "%s: request to send packet of length %d\n", dev->name, (int) skb->len);
1072
1073         netif_stop_queue(dev);
1074
1075         /*
1076          * send the packet at skb->data for skb->len
1077          */
1078         if (!send_packet(dev, skb)) {
1079                 if (elp_debug >= 2) {
1080                         printk(KERN_DEBUG "%s: failed to transmit packet\n", dev->name);
1081                 }
1082                 spin_unlock_irqrestore(&adapter->lock, flags);
1083                 return 1;
1084         }
1085         if (elp_debug >= 3)
1086                 printk(KERN_DEBUG "%s: packet of length %d sent\n", dev->name, (int) skb->len);
1087
1088         /*
1089          * start the transmit timeout
1090          */
1091         dev->trans_start = jiffies;
1092
1093         prime_rx(dev);
1094         spin_unlock_irqrestore(&adapter->lock, flags);
1095         netif_start_queue(dev);
1096         return 0;
1097 }
1098
1099 /******************************************************
1100  *
1101  * return statistics on the board
1102  *
1103  ******************************************************/
1104
1105 static struct net_device_stats *elp_get_stats(struct net_device *dev)
1106 {
1107         elp_device *adapter = netdev_priv(dev);
1108
1109         if (elp_debug >= 3)
1110                 printk(KERN_DEBUG "%s: request for stats\n", dev->name);
1111
1112         /* If the device is closed, just return the latest stats we have,
1113            - we cannot ask from the adapter without interrupts */
1114         if (!netif_running(dev))
1115                 return &dev->stats;
1116
1117         /* send a get statistics command to the board */
1118         adapter->tx_pcb.command = CMD_NETWORK_STATISTICS;
1119         adapter->tx_pcb.length = 0;
1120         adapter->got[CMD_NETWORK_STATISTICS] = 0;
1121         if (!send_pcb(dev, &adapter->tx_pcb))
1122                 printk(KERN_ERR "%s: couldn't send get statistics command\n", dev->name);
1123         else {
1124                 unsigned long timeout = jiffies + TIMEOUT;
1125                 while (adapter->got[CMD_NETWORK_STATISTICS] == 0 && time_before(jiffies, timeout));
1126                 if (time_after_eq(jiffies, timeout)) {
1127                         TIMEOUT_MSG(__LINE__);
1128                         return &dev->stats;
1129                 }
1130         }
1131
1132         /* statistics are now up to date */
1133         return &dev->stats;
1134 }
1135
1136
1137 static void netdev_get_drvinfo(struct net_device *dev,
1138                                struct ethtool_drvinfo *info)
1139 {
1140         strcpy(info->driver, DRV_NAME);
1141         strcpy(info->version, DRV_VERSION);
1142         sprintf(info->bus_info, "ISA 0x%lx", dev->base_addr);
1143 }
1144
1145 static u32 netdev_get_msglevel(struct net_device *dev)
1146 {
1147         return debug;
1148 }
1149
1150 static void netdev_set_msglevel(struct net_device *dev, u32 level)
1151 {
1152         debug = level;
1153 }
1154
1155 static const struct ethtool_ops netdev_ethtool_ops = {
1156         .get_drvinfo            = netdev_get_drvinfo,
1157         .get_msglevel           = netdev_get_msglevel,
1158         .set_msglevel           = netdev_set_msglevel,
1159 };
1160
1161 /******************************************************
1162  *
1163  * close the board
1164  *
1165  ******************************************************/
1166
1167 static int elp_close(struct net_device *dev)
1168 {
1169         elp_device *adapter = netdev_priv(dev);
1170
1171         if (elp_debug >= 3)
1172                 printk(KERN_DEBUG "%s: request to close device\n", dev->name);
1173
1174         netif_stop_queue(dev);
1175
1176         /* Someone may request the device statistic information even when
1177          * the interface is closed. The following will update the statistics
1178          * structure in the driver, so we'll be able to give current statistics.
1179          */
1180         (void) elp_get_stats(dev);
1181
1182         /*
1183          * disable interrupts on the board
1184          */
1185         outb_control(0, dev);
1186
1187         /*
1188          * release the IRQ
1189          */
1190         free_irq(dev->irq, dev);
1191
1192         free_dma(dev->dma);
1193         free_pages((unsigned long) adapter->dma_buffer, get_order(DMA_BUFFER_SIZE));
1194
1195         return 0;
1196 }
1197
1198
1199 /************************************************************
1200  *
1201  * Set multicast list
1202  * num_addrs==0: clear mc_list
1203  * num_addrs==-1: set promiscuous mode
1204  * num_addrs>0: set mc_list
1205  *
1206  ************************************************************/
1207
1208 static void elp_set_mc_list(struct net_device *dev)
1209 {
1210         elp_device *adapter = netdev_priv(dev);
1211         struct dev_mc_list *dmi = dev->mc_list;
1212         int i;
1213         unsigned long flags;
1214
1215         if (elp_debug >= 3)
1216                 printk(KERN_DEBUG "%s: request to set multicast list\n", dev->name);
1217
1218         spin_lock_irqsave(&adapter->lock, flags);
1219
1220         if (!(dev->flags & (IFF_PROMISC | IFF_ALLMULTI))) {
1221                 /* send a "load multicast list" command to the board, max 10 addrs/cmd */
1222                 /* if num_addrs==0 the list will be cleared */
1223                 adapter->tx_pcb.command = CMD_LOAD_MULTICAST_LIST;
1224                 adapter->tx_pcb.length = 6 * dev->mc_count;
1225                 for (i = 0; i < dev->mc_count; i++) {
1226                         memcpy(adapter->tx_pcb.data.multicast[i], dmi->dmi_addr, 6);
1227                         dmi = dmi->next;
1228                 }
1229                 adapter->got[CMD_LOAD_MULTICAST_LIST] = 0;
1230                 if (!send_pcb(dev, &adapter->tx_pcb))
1231                         printk(KERN_ERR "%s: couldn't send set_multicast command\n", dev->name);
1232                 else {
1233                         unsigned long timeout = jiffies + TIMEOUT;
1234                         while (adapter->got[CMD_LOAD_MULTICAST_LIST] == 0 && time_before(jiffies, timeout));
1235                         if (time_after_eq(jiffies, timeout)) {
1236                                 TIMEOUT_MSG(__LINE__);
1237                         }
1238                 }
1239                 if (dev->mc_count)
1240                         adapter->tx_pcb.data.configure = NO_LOOPBACK | RECV_BROAD | RECV_MULTI;
1241                 else            /* num_addrs == 0 */
1242                         adapter->tx_pcb.data.configure = NO_LOOPBACK | RECV_BROAD;
1243         } else
1244                 adapter->tx_pcb.data.configure = NO_LOOPBACK | RECV_PROMISC;
1245         /*
1246          * configure adapter to receive messages (as specified above)
1247          * and wait for response
1248          */
1249         if (elp_debug >= 3)
1250                 printk(KERN_DEBUG "%s: sending 82586 configure command\n", dev->name);
1251         adapter->tx_pcb.command = CMD_CONFIGURE_82586;
1252         adapter->tx_pcb.length = 2;
1253         adapter->got[CMD_CONFIGURE_82586] = 0;
1254         if (!send_pcb(dev, &adapter->tx_pcb))
1255         {
1256                 spin_unlock_irqrestore(&adapter->lock, flags);
1257                 printk(KERN_ERR "%s: couldn't send 82586 configure command\n", dev->name);
1258         }
1259         else {
1260                 unsigned long timeout = jiffies + TIMEOUT;
1261                 spin_unlock_irqrestore(&adapter->lock, flags);
1262                 while (adapter->got[CMD_CONFIGURE_82586] == 0 && time_before(jiffies, timeout));
1263                 if (time_after_eq(jiffies, timeout))
1264                         TIMEOUT_MSG(__LINE__);
1265         }
1266 }
1267
1268 /************************************************************
1269  *
1270  * A couple of tests to see if there's 3C505 or not
1271  * Called only by elp_autodetect
1272  ************************************************************/
1273
1274 static int __init elp_sense(struct net_device *dev)
1275 {
1276         int addr = dev->base_addr;
1277         const char *name = dev->name;
1278         byte orig_HSR;
1279
1280         if (!request_region(addr, ELP_IO_EXTENT, "3c505"))
1281                 return -ENODEV;
1282
1283         orig_HSR = inb_status(addr);
1284
1285         if (elp_debug > 0)
1286                 printk(search_msg, name, addr);
1287
1288         if (orig_HSR == 0xff) {
1289                 if (elp_debug > 0)
1290                         printk(notfound_msg, 1);
1291                 goto out;
1292         }
1293
1294         /* Wait for a while; the adapter may still be booting up */
1295         if (elp_debug > 0)
1296                 printk(stilllooking_msg);
1297
1298         if (orig_HSR & DIR) {
1299                 /* If HCR.DIR is up, we pull it down. HSR.DIR should follow. */
1300                 outb(0, dev->base_addr + PORT_CONTROL);
1301                 msleep(300);
1302                 if (inb_status(addr) & DIR) {
1303                         if (elp_debug > 0)
1304                                 printk(notfound_msg, 2);
1305                         goto out;
1306                 }
1307         } else {
1308                 /* If HCR.DIR is down, we pull it up. HSR.DIR should follow. */
1309                 outb(DIR, dev->base_addr + PORT_CONTROL);
1310                 msleep(300);
1311                 if (!(inb_status(addr) & DIR)) {
1312                         if (elp_debug > 0)
1313                                 printk(notfound_msg, 3);
1314                         goto out;
1315                 }
1316         }
1317         /*
1318          * It certainly looks like a 3c505.
1319          */
1320         if (elp_debug > 0)
1321                 printk(found_msg);
1322
1323         return 0;
1324 out:
1325         release_region(addr, ELP_IO_EXTENT);
1326         return -ENODEV;
1327 }
1328
1329 /*************************************************************
1330  *
1331  * Search through addr_list[] and try to find a 3C505
1332  * Called only by eplus_probe
1333  *************************************************************/
1334
1335 static int __init elp_autodetect(struct net_device *dev)
1336 {
1337         int idx = 0;
1338
1339         /* if base address set, then only check that address
1340            otherwise, run through the table */
1341         if (dev->base_addr != 0) {      /* dev->base_addr == 0 ==> plain autodetect */
1342                 if (elp_sense(dev) == 0)
1343                         return dev->base_addr;
1344         } else
1345                 while ((dev->base_addr = addr_list[idx++])) {
1346                         if (elp_sense(dev) == 0)
1347                                 return dev->base_addr;
1348                 }
1349
1350         /* could not find an adapter */
1351         if (elp_debug > 0)
1352                 printk(couldnot_msg, dev->name);
1353
1354         return 0;               /* Because of this, the layer above will return -ENODEV */
1355 }
1356
1357
1358 /******************************************************
1359  *
1360  * probe for an Etherlink Plus board at the specified address
1361  *
1362  ******************************************************/
1363
1364 /* There are three situations we need to be able to detect here:
1365
1366  *  a) the card is idle
1367  *  b) the card is still booting up
1368  *  c) the card is stuck in a strange state (some DOS drivers do this)
1369  *
1370  * In case (a), all is well.  In case (b), we wait 10 seconds to see if the
1371  * card finishes booting, and carry on if so.  In case (c), we do a hard reset,
1372  * loop round, and hope for the best.
1373  *
1374  * This is all very unpleasant, but hopefully avoids the problems with the old
1375  * probe code (which had a 15-second delay if the card was idle, and didn't
1376  * work at all if it was in a weird state).
1377  */
1378
1379 static int __init elplus_setup(struct net_device *dev)
1380 {
1381         elp_device *adapter = netdev_priv(dev);
1382         int i, tries, tries1, okay;
1383         unsigned long timeout;
1384         unsigned long cookie = 0;
1385         int err = -ENODEV;
1386
1387         /*
1388          *  setup adapter structure
1389          */
1390
1391         dev->base_addr = elp_autodetect(dev);
1392         if (!dev->base_addr)
1393                 return -ENODEV;
1394
1395         adapter->send_pcb_semaphore = 0;
1396
1397         for (tries1 = 0; tries1 < 3; tries1++) {
1398                 outb_control((adapter->hcr_val | CMDE) & ~DIR, dev);
1399                 /* First try to write just one byte, to see if the card is
1400                  * responding at all normally.
1401                  */
1402                 timeout = jiffies + 5*HZ/100;
1403                 okay = 0;
1404                 while (time_before(jiffies, timeout) && !(inb_status(dev->base_addr) & HCRE));
1405                 if ((inb_status(dev->base_addr) & HCRE)) {
1406                         outb_command(0, dev->base_addr);        /* send a spurious byte */
1407                         timeout = jiffies + 5*HZ/100;
1408                         while (time_before(jiffies, timeout) && !(inb_status(dev->base_addr) & HCRE));
1409                         if (inb_status(dev->base_addr) & HCRE)
1410                                 okay = 1;
1411                 }
1412                 if (!okay) {
1413                         /* Nope, it's ignoring the command register.  This means that
1414                          * either it's still booting up, or it's died.
1415                          */
1416                         printk(KERN_ERR "%s: command register wouldn't drain, ", dev->name);
1417                         if ((inb_status(dev->base_addr) & 7) == 3) {
1418                                 /* If the adapter status is 3, it *could* still be booting.
1419                                  * Give it the benefit of the doubt for 10 seconds.
1420                                  */
1421                                 printk("assuming 3c505 still starting\n");
1422                                 timeout = jiffies + 10*HZ;
1423                                 while (time_before(jiffies, timeout) && (inb_status(dev->base_addr) & 7));
1424                                 if (inb_status(dev->base_addr) & 7) {
1425                                         printk(KERN_ERR "%s: 3c505 failed to start\n", dev->name);
1426                                 } else {
1427                                         okay = 1;  /* It started */
1428                                 }
1429                         } else {
1430                                 /* Otherwise, it must just be in a strange
1431                                  * state.  We probably need to kick it.
1432                                  */
1433                                 printk("3c505 is sulking\n");
1434                         }
1435                 }
1436                 for (tries = 0; tries < 5 && okay; tries++) {
1437
1438                         /*
1439                          * Try to set the Ethernet address, to make sure that the board
1440                          * is working.
1441                          */
1442                         adapter->tx_pcb.command = CMD_STATION_ADDRESS;
1443                         adapter->tx_pcb.length = 0;
1444                         cookie = probe_irq_on();
1445                         if (!send_pcb(dev, &adapter->tx_pcb)) {
1446                                 printk(KERN_ERR "%s: could not send first PCB\n", dev->name);
1447                                 probe_irq_off(cookie);
1448                                 continue;
1449                         }
1450                         if (!receive_pcb(dev, &adapter->rx_pcb)) {
1451                                 printk(KERN_ERR "%s: could not read first PCB\n", dev->name);
1452                                 probe_irq_off(cookie);
1453                                 continue;
1454                         }
1455                         if ((adapter->rx_pcb.command != CMD_ADDRESS_RESPONSE) ||
1456                             (adapter->rx_pcb.length != 6)) {
1457                                 printk(KERN_ERR "%s: first PCB wrong (%d, %d)\n", dev->name, adapter->rx_pcb.command, adapter->rx_pcb.length);
1458                                 probe_irq_off(cookie);
1459                                 continue;
1460                         }
1461                         goto okay;
1462                 }
1463                 /* It's broken.  Do a hard reset to re-initialise the board,
1464                  * and try again.
1465                  */
1466                 printk(KERN_INFO "%s: resetting adapter\n", dev->name);
1467                 outb_control(adapter->hcr_val | FLSH | ATTN, dev);
1468                 outb_control(adapter->hcr_val & ~(FLSH | ATTN), dev);
1469         }
1470         printk(KERN_ERR "%s: failed to initialise 3c505\n", dev->name);
1471         goto out;
1472
1473       okay:
1474         if (dev->irq) {         /* Is there a preset IRQ? */
1475                 int rpt = probe_irq_off(cookie);
1476                 if (dev->irq != rpt) {
1477                         printk(KERN_WARNING "%s: warning, irq %d configured but %d detected\n", dev->name, dev->irq, rpt);
1478                 }
1479                 /* if dev->irq == probe_irq_off(cookie), all is well */
1480         } else                 /* No preset IRQ; just use what we can detect */
1481                 dev->irq = probe_irq_off(cookie);
1482         switch (dev->irq) {    /* Legal, sane? */
1483         case 0:
1484                 printk(KERN_ERR "%s: IRQ probe failed: check 3c505 jumpers.\n",
1485                        dev->name);
1486                 goto out;
1487         case 1:
1488         case 6:
1489         case 8:
1490         case 13:
1491                 printk(KERN_ERR "%s: Impossible IRQ %d reported by probe_irq_off().\n",
1492                        dev->name, dev->irq);
1493                        goto out;
1494         }
1495         /*
1496          *  Now we have the IRQ number so we can disable the interrupts from
1497          *  the board until the board is opened.
1498          */
1499         outb_control(adapter->hcr_val & ~CMDE, dev);
1500
1501         /*
1502          * copy Ethernet address into structure
1503          */
1504         for (i = 0; i < 6; i++)
1505                 dev->dev_addr[i] = adapter->rx_pcb.data.eth_addr[i];
1506
1507         /* find a DMA channel */
1508         if (!dev->dma) {
1509                 if (dev->mem_start) {
1510                         dev->dma = dev->mem_start & 7;
1511                 }
1512                 else {
1513                         printk(KERN_WARNING "%s: warning, DMA channel not specified, using default\n", dev->name);
1514                         dev->dma = ELP_DMA;
1515                 }
1516         }
1517
1518         /*
1519          * print remainder of startup message
1520          */
1521         printk(KERN_INFO "%s: 3c505 at %#lx, irq %d, dma %d, "
1522                "addr %pM, ",
1523                dev->name, dev->base_addr, dev->irq, dev->dma,
1524                dev->dev_addr);
1525
1526         /*
1527          * read more information from the adapter
1528          */
1529
1530         adapter->tx_pcb.command = CMD_ADAPTER_INFO;
1531         adapter->tx_pcb.length = 0;
1532         if (!send_pcb(dev, &adapter->tx_pcb) ||
1533             !receive_pcb(dev, &adapter->rx_pcb) ||
1534             (adapter->rx_pcb.command != CMD_ADAPTER_INFO_RESPONSE) ||
1535             (adapter->rx_pcb.length != 10)) {
1536                 printk("not responding to second PCB\n");
1537         }
1538         printk("rev %d.%d, %dk\n", adapter->rx_pcb.data.info.major_vers, adapter->rx_pcb.data.info.minor_vers, adapter->rx_pcb.data.info.RAM_sz);
1539
1540         /*
1541          * reconfigure the adapter memory to better suit our purposes
1542          */
1543         adapter->tx_pcb.command = CMD_CONFIGURE_ADAPTER_MEMORY;
1544         adapter->tx_pcb.length = 12;
1545         adapter->tx_pcb.data.memconf.cmd_q = 8;
1546         adapter->tx_pcb.data.memconf.rcv_q = 8;
1547         adapter->tx_pcb.data.memconf.mcast = 10;
1548         adapter->tx_pcb.data.memconf.frame = 10;
1549         adapter->tx_pcb.data.memconf.rcv_b = 10;
1550         adapter->tx_pcb.data.memconf.progs = 0;
1551         if (!send_pcb(dev, &adapter->tx_pcb) ||
1552             !receive_pcb(dev, &adapter->rx_pcb) ||
1553             (adapter->rx_pcb.command != CMD_CONFIGURE_ADAPTER_RESPONSE) ||
1554             (adapter->rx_pcb.length != 2)) {
1555                 printk(KERN_ERR "%s: could not configure adapter memory\n", dev->name);
1556         }
1557         if (adapter->rx_pcb.data.configure) {
1558                 printk(KERN_ERR "%s: adapter configuration failed\n", dev->name);
1559         }
1560
1561         dev->open = elp_open;                           /* local */
1562         dev->stop = elp_close;                          /* local */
1563         dev->get_stats = elp_get_stats;                 /* local */
1564         dev->hard_start_xmit = elp_start_xmit;          /* local */
1565         dev->tx_timeout = elp_timeout;                  /* local */
1566         dev->watchdog_timeo = 10*HZ;
1567         dev->set_multicast_list = elp_set_mc_list;      /* local */
1568         dev->ethtool_ops = &netdev_ethtool_ops;         /* local */
1569
1570         dev->mem_start = dev->mem_end = 0;
1571
1572         err = register_netdev(dev);
1573         if (err)
1574                 goto out;
1575
1576         return 0;
1577 out:
1578         release_region(dev->base_addr, ELP_IO_EXTENT);
1579         return err;
1580 }
1581
1582 #ifndef MODULE
1583 struct net_device * __init elplus_probe(int unit)
1584 {
1585         struct net_device *dev = alloc_etherdev(sizeof(elp_device));
1586         int err;
1587         if (!dev)
1588                 return ERR_PTR(-ENOMEM);
1589
1590         sprintf(dev->name, "eth%d", unit);
1591         netdev_boot_setup_check(dev);
1592
1593         err = elplus_setup(dev);
1594         if (err) {
1595                 free_netdev(dev);
1596                 return ERR_PTR(err);
1597         }
1598         return dev;
1599 }
1600
1601 #else
1602 static struct net_device *dev_3c505[ELP_MAX_CARDS];
1603 static int io[ELP_MAX_CARDS];
1604 static int irq[ELP_MAX_CARDS];
1605 static int dma[ELP_MAX_CARDS];
1606 module_param_array(io, int, NULL, 0);
1607 module_param_array(irq, int, NULL, 0);
1608 module_param_array(dma, int, NULL, 0);
1609 MODULE_PARM_DESC(io, "EtherLink Plus I/O base address(es)");
1610 MODULE_PARM_DESC(irq, "EtherLink Plus IRQ number(s) (assigned)");
1611 MODULE_PARM_DESC(dma, "EtherLink Plus DMA channel(s)");
1612
1613 int __init init_module(void)
1614 {
1615         int this_dev, found = 0;
1616
1617         for (this_dev = 0; this_dev < ELP_MAX_CARDS; this_dev++) {
1618                 struct net_device *dev = alloc_etherdev(sizeof(elp_device));
1619                 if (!dev)
1620                         break;
1621
1622                 dev->irq = irq[this_dev];
1623                 dev->base_addr = io[this_dev];
1624                 if (dma[this_dev]) {
1625                         dev->dma = dma[this_dev];
1626                 } else {
1627                         dev->dma = ELP_DMA;
1628                         printk(KERN_WARNING "3c505.c: warning, using default DMA channel,\n");
1629                 }
1630                 if (io[this_dev] == 0) {
1631                         if (this_dev) {
1632                                 free_netdev(dev);
1633                                 break;
1634                         }
1635                         printk(KERN_NOTICE "3c505.c: module autoprobe not recommended, give io=xx.\n");
1636                 }
1637                 if (elplus_setup(dev) != 0) {
1638                         printk(KERN_WARNING "3c505.c: Failed to register card at 0x%x.\n", io[this_dev]);
1639                         free_netdev(dev);
1640                         break;
1641                 }
1642                 dev_3c505[this_dev] = dev;
1643                 found++;
1644         }
1645         if (!found)
1646                 return -ENODEV;
1647         return 0;
1648 }
1649
1650 void __exit cleanup_module(void)
1651 {
1652         int this_dev;
1653
1654         for (this_dev = 0; this_dev < ELP_MAX_CARDS; this_dev++) {
1655                 struct net_device *dev = dev_3c505[this_dev];
1656                 if (dev) {
1657                         unregister_netdev(dev);
1658                         release_region(dev->base_addr, ELP_IO_EXTENT);
1659                         free_netdev(dev);
1660                 }
1661         }
1662 }
1663
1664 #endif                          /* MODULE */
1665 MODULE_LICENSE("GPL");