5 this file has configuration informations - card-specific stuff
6 like the big tvcards array for the most part
8 Copyright (C) 1996,97,98 Ralph Metzler (rjkm@thp.uni-koeln.de)
9 & Marcus Metzler (mocm@thp.uni-koeln.de)
10 (c) 1999-2001 Gerd Knorr <kraxel@goldbach.in-berlin.de>
12 This program is free software; you can redistribute it and/or modify
13 it under the terms of the GNU General Public License as published by
14 the Free Software Foundation; either version 2 of the License, or
15 (at your option) any later version.
17 This program is distributed in the hope that it will be useful,
18 but WITHOUT ANY WARRANTY; without even the implied warranty of
19 MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
20 GNU General Public License for more details.
22 You should have received a copy of the GNU General Public License
23 along with this program; if not, write to the Free Software
24 Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
28 #include <linux/delay.h>
29 #include <linux/module.h>
30 #include <linux/moduleparam.h>
31 #include <linux/kmod.h>
32 #include <linux/init.h>
33 #include <linux/pci.h>
34 #include <linux/vmalloc.h>
35 #include <linux/firmware.h>
40 #include <media/v4l2-common.h>
41 #include <media/tvaudio.h>
44 static void boot_msp34xx(struct bttv *btv, int pin);
45 static void boot_bt832(struct bttv *btv);
46 static void hauppauge_eeprom(struct bttv *btv);
47 static void avermedia_eeprom(struct bttv *btv);
48 static void osprey_eeprom(struct bttv *btv);
49 static void modtec_eeprom(struct bttv *btv);
50 static void init_PXC200(struct bttv *btv);
51 static void init_RTV24(struct bttv *btv);
53 static void winview_audio(struct bttv *btv, struct video_audio *v, int set);
54 static void lt9415_audio(struct bttv *btv, struct video_audio *v, int set);
55 static void avermedia_tvphone_audio(struct bttv *btv, struct video_audio *v,
57 static void avermedia_tv_stereo_audio(struct bttv *btv, struct video_audio *v,
59 static void terratv_audio(struct bttv *btv, struct video_audio *v, int set);
60 static void gvbctv3pci_audio(struct bttv *btv, struct video_audio *v, int set);
61 static void gvbctv5pci_audio(struct bttv *btv, struct video_audio *v, int set);
62 static void winfast2000_audio(struct bttv *btv, struct video_audio *v, int set);
63 static void pvbt878p9b_audio(struct bttv *btv, struct video_audio *v, int set);
64 static void fv2000s_audio(struct bttv *btv, struct video_audio *v, int set);
65 static void windvr_audio(struct bttv *btv, struct video_audio *v, int set);
66 static void adtvk503_audio(struct bttv *btv, struct video_audio *v, int set);
67 static void rv605_muxsel(struct bttv *btv, unsigned int input);
68 static void eagle_muxsel(struct bttv *btv, unsigned int input);
69 static void xguard_muxsel(struct bttv *btv, unsigned int input);
70 static void ivc120_muxsel(struct bttv *btv, unsigned int input);
71 static void gvc1100_muxsel(struct bttv *btv, unsigned int input);
73 static void PXC200_muxsel(struct bttv *btv, unsigned int input);
75 static void picolo_tetra_muxsel(struct bttv *btv, unsigned int input);
76 static void picolo_tetra_init(struct bttv *btv);
78 static void tibetCS16_muxsel(struct bttv *btv, unsigned int input);
79 static void tibetCS16_init(struct bttv *btv);
81 static void kodicom4400r_muxsel(struct bttv *btv, unsigned int input);
82 static void kodicom4400r_init(struct bttv *btv);
84 static void sigmaSLC_muxsel(struct bttv *btv, unsigned int input);
85 static void sigmaSQ_muxsel(struct bttv *btv, unsigned int input);
87 static int terratec_active_radio_upgrade(struct bttv *btv);
88 static int tea5757_read(struct bttv *btv);
89 static int tea5757_write(struct bttv *btv, int value);
90 static void identify_by_eeprom(struct bttv *btv,
91 unsigned char eeprom_data[256]);
92 static int __devinit pvr_boot(struct bttv *btv);
94 /* config variables */
95 static unsigned int triton1;
96 static unsigned int vsfx;
97 static unsigned int latency = UNSET;
100 static unsigned int card[BTTV_MAX] = { [ 0 ... (BTTV_MAX-1) ] = UNSET };
101 static unsigned int pll[BTTV_MAX] = { [ 0 ... (BTTV_MAX-1) ] = UNSET };
102 static unsigned int tuner[BTTV_MAX] = { [ 0 ... (BTTV_MAX-1) ] = UNSET };
103 static unsigned int svhs[BTTV_MAX] = { [ 0 ... (BTTV_MAX-1) ] = UNSET };
104 static unsigned int remote[BTTV_MAX] = { [ 0 ... (BTTV_MAX-1) ] = UNSET };
105 static struct bttv *master[BTTV_MAX] = { [ 0 ... (BTTV_MAX-1) ] = NULL };
107 static unsigned int autoload = 1;
109 static unsigned int autoload;
111 static unsigned int gpiomask = UNSET;
112 static unsigned int audioall = UNSET;
113 static unsigned int audiomux[5] = { [ 0 ... 4 ] = UNSET };
116 module_param(triton1, int, 0444);
117 module_param(vsfx, int, 0444);
118 module_param(no_overlay, int, 0444);
119 module_param(latency, int, 0444);
120 module_param(gpiomask, int, 0444);
121 module_param(audioall, int, 0444);
122 module_param(autoload, int, 0444);
124 module_param_array(card, int, NULL, 0444);
125 module_param_array(pll, int, NULL, 0444);
126 module_param_array(tuner, int, NULL, 0444);
127 module_param_array(svhs, int, NULL, 0444);
128 module_param_array(remote, int, NULL, 0444);
129 module_param_array(audiomux, int, NULL, 0444);
131 MODULE_PARM_DESC(triton1,"set ETBF pci config bit "
132 "[enable bug compatibility for triton1 + others]");
133 MODULE_PARM_DESC(vsfx,"set VSFX pci config bit "
134 "[yet another chipset flaw workaround]");
135 MODULE_PARM_DESC(latency,"pci latency timer");
136 MODULE_PARM_DESC(card,"specify TV/grabber card model, see CARDLIST file for a list");
137 MODULE_PARM_DESC(pll,"specify installed crystal (0=none, 28=28 MHz, 35=35 MHz)");
138 MODULE_PARM_DESC(tuner,"specify installed tuner type");
139 MODULE_PARM_DESC(autoload,"automatically load i2c modules like tuner.o, default is 1 (yes)");
140 MODULE_PARM_DESC(no_overlay,"allow override overlay default (0 disables, 1 enables)"
141 " [some VIA/SIS chipsets are known to have problem with overlay]");
143 /* ----------------------------------------------------------------------- */
144 /* list of card IDs for bt878+ cards */
150 } cards[] __devinitdata = {
151 { 0x13eb0070, BTTV_BOARD_HAUPPAUGE878, "Hauppauge WinTV" },
152 { 0x39000070, BTTV_BOARD_HAUPPAUGE878, "Hauppauge WinTV-D" },
153 { 0x45000070, BTTV_BOARD_HAUPPAUGEPVR, "Hauppauge WinTV/PVR" },
154 { 0xff000070, BTTV_BOARD_OSPREY1x0, "Osprey-100" },
155 { 0xff010070, BTTV_BOARD_OSPREY2x0_SVID,"Osprey-200" },
156 { 0xff020070, BTTV_BOARD_OSPREY500, "Osprey-500" },
157 { 0xff030070, BTTV_BOARD_OSPREY2000, "Osprey-2000" },
158 { 0xff040070, BTTV_BOARD_OSPREY540, "Osprey-540" },
159 { 0xff070070, BTTV_BOARD_OSPREY440, "Osprey-440" },
161 { 0x00011002, BTTV_BOARD_ATI_TVWONDER, "ATI TV Wonder" },
162 { 0x00031002, BTTV_BOARD_ATI_TVWONDERVE,"ATI TV Wonder/VE" },
164 { 0x6606107d, BTTV_BOARD_WINFAST2000, "Leadtek WinFast TV 2000" },
165 { 0x6607107d, BTTV_BOARD_WINFASTVC100, "Leadtek WinFast VC 100" },
166 { 0x6609107d, BTTV_BOARD_WINFAST2000, "Leadtek TV 2000 XP" },
167 { 0x263610b4, BTTV_BOARD_STB2, "STB TV PCI FM, Gateway P/N 6000704" },
168 { 0x264510b4, BTTV_BOARD_STB2, "STB TV PCI FM, Gateway P/N 6000704" },
169 { 0x402010fc, BTTV_BOARD_GVBCTV3PCI, "I-O Data Co. GV-BCTV3/PCI" },
170 { 0x405010fc, BTTV_BOARD_GVBCTV4PCI, "I-O Data Co. GV-BCTV4/PCI" },
171 { 0x407010fc, BTTV_BOARD_GVBCTV5PCI, "I-O Data Co. GV-BCTV5/PCI" },
172 { 0xd01810fc, BTTV_BOARD_GVBCTV5PCI, "I-O Data Co. GV-BCTV5/PCI" },
174 { 0x001211bd, BTTV_BOARD_PINNACLE, "Pinnacle PCTV" },
175 /* some cards ship with byteswapped IDs ... */
176 { 0x1200bd11, BTTV_BOARD_PINNACLE, "Pinnacle PCTV [bswap]" },
177 { 0xff00bd11, BTTV_BOARD_PINNACLE, "Pinnacle PCTV [bswap]" },
178 /* this seems to happen as well ... */
179 { 0xff1211bd, BTTV_BOARD_PINNACLE, "Pinnacle PCTV" },
181 { 0x3000121a, BTTV_BOARD_VOODOOTV_200, "3Dfx VoodooTV 200" },
182 { 0x263710b4, BTTV_BOARD_VOODOOTV_FM, "3Dfx VoodooTV FM" },
183 { 0x3060121a, BTTV_BOARD_STB2, "3Dfx VoodooTV 100/ STB OEM" },
185 { 0x3000144f, BTTV_BOARD_MAGICTVIEW063, "(Askey Magic/others) TView99 CPH06x" },
186 { 0xa005144f, BTTV_BOARD_MAGICTVIEW063, "CPH06X TView99-Card" },
187 { 0x3002144f, BTTV_BOARD_MAGICTVIEW061, "(Askey Magic/others) TView99 CPH05x" },
188 { 0x3005144f, BTTV_BOARD_MAGICTVIEW061, "(Askey Magic/others) TView99 CPH061/06L (T1/LC)" },
189 { 0x5000144f, BTTV_BOARD_MAGICTVIEW061, "Askey CPH050" },
190 { 0x300014ff, BTTV_BOARD_MAGICTVIEW061, "TView 99 (CPH061)" },
191 { 0x300214ff, BTTV_BOARD_PHOEBE_TVMAS, "Phoebe TV Master (CPH060)" },
193 { 0x00011461, BTTV_BOARD_AVPHONE98, "AVerMedia TVPhone98" },
194 { 0x00021461, BTTV_BOARD_AVERMEDIA98, "AVermedia TVCapture 98" },
195 { 0x00031461, BTTV_BOARD_AVPHONE98, "AVerMedia TVPhone98" },
196 { 0x00041461, BTTV_BOARD_AVERMEDIA98, "AVerMedia TVCapture 98" },
197 { 0x03001461, BTTV_BOARD_AVERMEDIA98, "VDOMATE TV TUNER CARD" },
199 { 0x1117153b, BTTV_BOARD_TERRATVALUE, "Terratec TValue (Philips PAL B/G)" },
200 { 0x1118153b, BTTV_BOARD_TERRATVALUE, "Terratec TValue (Temic PAL B/G)" },
201 { 0x1119153b, BTTV_BOARD_TERRATVALUE, "Terratec TValue (Philips PAL I)" },
202 { 0x111a153b, BTTV_BOARD_TERRATVALUE, "Terratec TValue (Temic PAL I)" },
204 { 0x1123153b, BTTV_BOARD_TERRATVRADIO, "Terratec TV Radio+" },
205 { 0x1127153b, BTTV_BOARD_TERRATV, "Terratec TV+ (V1.05)" },
206 /* clashes with FlyVideo
207 *{ 0x18521852, BTTV_BOARD_TERRATV, "Terratec TV+ (V1.10)" }, */
208 { 0x1134153b, BTTV_BOARD_TERRATVALUE, "Terratec TValue (LR102)" },
209 { 0x1135153b, BTTV_BOARD_TERRATVALUER, "Terratec TValue Radio" }, /* LR102 */
210 { 0x5018153b, BTTV_BOARD_TERRATVALUE, "Terratec TValue" }, /* ?? */
211 { 0xff3b153b, BTTV_BOARD_TERRATVALUER, "Terratec TValue Radio" }, /* ?? */
213 { 0x400015b0, BTTV_BOARD_ZOLTRIX_GENIE, "Zoltrix Genie TV" },
214 { 0x400a15b0, BTTV_BOARD_ZOLTRIX_GENIE, "Zoltrix Genie TV" },
215 { 0x400d15b0, BTTV_BOARD_ZOLTRIX_GENIE, "Zoltrix Genie TV / Radio" },
216 { 0x401015b0, BTTV_BOARD_ZOLTRIX_GENIE, "Zoltrix Genie TV / Radio" },
217 { 0x401615b0, BTTV_BOARD_ZOLTRIX_GENIE, "Zoltrix Genie TV / Radio" },
219 { 0x1430aa00, BTTV_BOARD_PV143, "Provideo PV143A" },
220 { 0x1431aa00, BTTV_BOARD_PV143, "Provideo PV143B" },
221 { 0x1432aa00, BTTV_BOARD_PV143, "Provideo PV143C" },
222 { 0x1433aa00, BTTV_BOARD_PV143, "Provideo PV143D" },
223 { 0x1433aa03, BTTV_BOARD_PV143, "Security Eyes" },
225 { 0x1460aa00, BTTV_BOARD_PV150, "Provideo PV150A-1" },
226 { 0x1461aa01, BTTV_BOARD_PV150, "Provideo PV150A-2" },
227 { 0x1462aa02, BTTV_BOARD_PV150, "Provideo PV150A-3" },
228 { 0x1463aa03, BTTV_BOARD_PV150, "Provideo PV150A-4" },
230 { 0x1464aa04, BTTV_BOARD_PV150, "Provideo PV150B-1" },
231 { 0x1465aa05, BTTV_BOARD_PV150, "Provideo PV150B-2" },
232 { 0x1466aa06, BTTV_BOARD_PV150, "Provideo PV150B-3" },
233 { 0x1467aa07, BTTV_BOARD_PV150, "Provideo PV150B-4" },
235 { 0xa132ff00, BTTV_BOARD_IVC100, "IVC-100" },
236 { 0xa1550000, BTTV_BOARD_IVC200, "IVC-200" },
237 { 0xa1550001, BTTV_BOARD_IVC200, "IVC-200" },
238 { 0xa1550002, BTTV_BOARD_IVC200, "IVC-200" },
239 { 0xa1550003, BTTV_BOARD_IVC200, "IVC-200" },
240 { 0xa1550100, BTTV_BOARD_IVC200, "IVC-200G" },
241 { 0xa1550101, BTTV_BOARD_IVC200, "IVC-200G" },
242 { 0xa1550102, BTTV_BOARD_IVC200, "IVC-200G" },
243 { 0xa1550103, BTTV_BOARD_IVC200, "IVC-200G" },
244 { 0xa182ff00, BTTV_BOARD_IVC120, "IVC-120G" },
245 { 0xa182ff01, BTTV_BOARD_IVC120, "IVC-120G" },
246 { 0xa182ff02, BTTV_BOARD_IVC120, "IVC-120G" },
247 { 0xa182ff03, BTTV_BOARD_IVC120, "IVC-120G" },
248 { 0xa182ff04, BTTV_BOARD_IVC120, "IVC-120G" },
249 { 0xa182ff05, BTTV_BOARD_IVC120, "IVC-120G" },
250 { 0xa182ff06, BTTV_BOARD_IVC120, "IVC-120G" },
251 { 0xa182ff07, BTTV_BOARD_IVC120, "IVC-120G" },
252 { 0xa182ff08, BTTV_BOARD_IVC120, "IVC-120G" },
253 { 0xa182ff09, BTTV_BOARD_IVC120, "IVC-120G" },
254 { 0xa182ff0a, BTTV_BOARD_IVC120, "IVC-120G" },
255 { 0xa182ff0b, BTTV_BOARD_IVC120, "IVC-120G" },
256 { 0xa182ff0c, BTTV_BOARD_IVC120, "IVC-120G" },
257 { 0xa182ff0d, BTTV_BOARD_IVC120, "IVC-120G" },
258 { 0xa182ff0e, BTTV_BOARD_IVC120, "IVC-120G" },
259 { 0xa182ff0f, BTTV_BOARD_IVC120, "IVC-120G" },
261 { 0x41424344, BTTV_BOARD_GRANDTEC, "GrandTec Multi Capture" },
262 { 0x01020304, BTTV_BOARD_XGUARD, "Grandtec Grand X-Guard" },
264 { 0x18501851, BTTV_BOARD_CHRONOS_VS2, "FlyVideo 98 (LR50)/ Chronos Video Shuttle II" },
265 { 0xa0501851, BTTV_BOARD_CHRONOS_VS2, "FlyVideo 98 (LR50)/ Chronos Video Shuttle II" },
266 { 0x18511851, BTTV_BOARD_FLYVIDEO98EZ, "FlyVideo 98EZ (LR51)/ CyberMail AV" },
267 { 0x18521852, BTTV_BOARD_TYPHOON_TVIEW, "FlyVideo 98FM (LR50)/ Typhoon TView TV/FM Tuner" },
268 { 0x41a0a051, BTTV_BOARD_FLYVIDEO_98FM, "Lifeview FlyVideo 98 LR50 Rev Q" },
269 { 0x18501f7f, BTTV_BOARD_FLYVIDEO_98, "Lifeview Flyvideo 98" },
271 { 0x010115cb, BTTV_BOARD_GMV1, "AG GMV1" },
272 { 0x010114c7, BTTV_BOARD_MODTEC_205, "Modular Technology MM201/MM202/MM205/MM210/MM215 PCTV" },
274 { 0x10b42636, BTTV_BOARD_HAUPPAUGE878, "STB ???" },
275 { 0x217d6606, BTTV_BOARD_WINFAST2000, "Leadtek WinFast TV 2000" },
276 { 0xfff6f6ff, BTTV_BOARD_WINFAST2000, "Leadtek WinFast TV 2000" },
277 { 0x03116000, BTTV_BOARD_SENSORAY311, "Sensoray 311" },
278 { 0x00790e11, BTTV_BOARD_WINDVR, "Canopus WinDVR PCI" },
279 { 0xa0fca1a0, BTTV_BOARD_ZOLTRIX, "Face to Face Tvmax" },
280 { 0x82b2aa6a, BTTV_BOARD_SIMUS_GVC1100, "SIMUS GVC1100" },
281 { 0x146caa0c, BTTV_BOARD_PV951, "ituner spectra8" },
282 { 0x200a1295, BTTV_BOARD_PXC200, "ImageNation PXC200A" },
284 { 0x40111554, BTTV_BOARD_PV_BT878P_9B, "Prolink Pixelview PV-BT" },
285 { 0x17de0a01, BTTV_BOARD_KWORLD, "Mecer TV/FM/Video Tuner" },
287 { 0x01051805, BTTV_BOARD_PICOLO_TETRA_CHIP, "Picolo Tetra Chip #1" },
288 { 0x01061805, BTTV_BOARD_PICOLO_TETRA_CHIP, "Picolo Tetra Chip #2" },
289 { 0x01071805, BTTV_BOARD_PICOLO_TETRA_CHIP, "Picolo Tetra Chip #3" },
290 { 0x01081805, BTTV_BOARD_PICOLO_TETRA_CHIP, "Picolo Tetra Chip #4" },
292 { 0x15409511, BTTV_BOARD_ACORP_Y878F, "Acorp Y878F" },
294 { 0x53534149, BTTV_BOARD_SSAI_SECURITY, "SSAI Security Video Interface" },
295 { 0x5353414a, BTTV_BOARD_SSAI_ULTRASOUND, "SSAI Ultrasound Video Interface" },
297 /* likely broken, vendor id doesn't match the other magic views ...
298 * { 0xa0fca04f, BTTV_BOARD_MAGICTVIEW063, "Guillemot Maxi TV Video 3" }, */
300 /* Duplicate PCI ID, reconfigure for this board during the eeprom read.
301 * { 0x13eb0070, BTTV_BOARD_HAUPPAUGE_IMPACTVCB, "Hauppauge ImpactVCB" }, */
303 /* DVB cards (using pci function .1 for mpeg data xfer) */
304 { 0x001c11bd, BTTV_BOARD_PINNACLESAT, "Pinnacle PCTV Sat" },
305 { 0x01010071, BTTV_BOARD_NEBULA_DIGITV, "Nebula Electronics DigiTV" },
306 { 0x20007063, BTTV_BOARD_PC_HDTV, "pcHDTV HD-2000 TV"},
307 { 0x002611bd, BTTV_BOARD_TWINHAN_DST, "Pinnacle PCTV SAT CI" },
308 { 0x00011822, BTTV_BOARD_TWINHAN_DST, "Twinhan VisionPlus DVB" },
309 { 0xfc00270f, BTTV_BOARD_TWINHAN_DST, "ChainTech digitop DST-1000 DVB-S" },
310 { 0x07711461, BTTV_BOARD_AVDVBT_771, "AVermedia AverTV DVB-T 771" },
311 { 0x07611461, BTTV_BOARD_AVDVBT_761, "AverMedia AverTV DVB-T 761" },
312 { 0xdb1018ac, BTTV_BOARD_DVICO_DVBT_LITE, "DViCO FusionHDTV DVB-T Lite" },
313 { 0xdb1118ac, BTTV_BOARD_DVICO_DVBT_LITE, "Ultraview DVB-T Lite" },
314 { 0xd50018ac, BTTV_BOARD_DVICO_FUSIONHDTV_5_LITE, "DViCO FusionHDTV 5 Lite" },
315 { 0x00261822, BTTV_BOARD_TWINHAN_DST, "DNTV Live! Mini "},
320 /* ----------------------------------------------------------------------- */
321 /* array with description for bt848 / bt878 tv/grabber cards */
323 struct tvcard bttv_tvcards[] = {
324 /* ---- card 0x00 ---------------------------------- */
325 [BTTV_BOARD_UNKNOWN] = {
326 .name = " *** UNKNOWN/GENERIC *** ",
331 .muxsel = { 2, 3, 1, 0 },
333 .tuner_addr = ADDR_UNSET,
334 .radio_addr = ADDR_UNSET,
336 [BTTV_BOARD_MIRO] = {
343 .muxsel = { 2, 3, 1, 1 },
344 .gpiomux = { 2, 0, 0, 0 },
348 .tuner_addr = ADDR_UNSET,
349 .radio_addr = ADDR_UNSET,
351 [BTTV_BOARD_HAUPPAUGE] = {
352 .name = "Hauppauge (bt848)",
358 .muxsel = { 2, 3, 1, 1 },
359 .gpiomux = { 0, 1, 2, 3 },
363 .tuner_addr = ADDR_UNSET,
364 .radio_addr = ADDR_UNSET,
367 .name = "STB, Gateway P/N 6000699 (bt848)",
373 .muxsel = { 2, 3, 1, 1 },
374 .gpiomux = { 4, 0, 2, 3 },
378 .tuner_type = TUNER_PHILIPS_NTSC,
379 .tuner_addr = ADDR_UNSET,
380 .radio_addr = ADDR_UNSET,
385 /* ---- card 0x04 ---------------------------------- */
386 [BTTV_BOARD_INTEL] = {
387 .name = "Intel Create and Share PCI/ Smart Video Recorder III",
393 .muxsel = { 2, 3, 1, 1 },
397 .tuner_addr = ADDR_UNSET,
398 .radio_addr = ADDR_UNSET,
400 [BTTV_BOARD_DIAMOND] = {
401 .name = "Diamond DTV2000",
407 .muxsel = { 2, 3, 1, 0 },
408 .gpiomux = { 0, 1, 0, 1 },
412 .tuner_addr = ADDR_UNSET,
413 .radio_addr = ADDR_UNSET,
415 [BTTV_BOARD_AVERMEDIA] = {
416 .name = "AVerMedia TVPhone",
421 .muxsel = { 2, 3, 1, 1 },
423 .gpiomux = { 0x0c, 0x04, 0x08, 0x04 },
424 /* 0x04 for some cards ?? */
427 .tuner_addr = ADDR_UNSET,
428 .radio_addr = ADDR_UNSET,
429 .audio_hook = avermedia_tvphone_audio,
432 [BTTV_BOARD_MATRIX_VISION] = {
433 .name = "MATRIX-Vision MV-Delta",
439 .muxsel = { 2, 3, 1, 0, 0 },
443 .tuner_addr = ADDR_UNSET,
444 .radio_addr = ADDR_UNSET,
447 /* ---- card 0x08 ---------------------------------- */
448 [BTTV_BOARD_FLYVIDEO] = {
449 .name = "Lifeview FlyVideo II (Bt848) LR26 / MAXI TV Video PCI2 LR26",
455 .muxsel = { 2, 3, 1, 1 },
456 .gpiomux = { 0, 0xc00, 0x800, 0x400 },
461 .tuner_addr = ADDR_UNSET,
462 .radio_addr = ADDR_UNSET,
464 [BTTV_BOARD_TURBOTV] = {
465 .name = "IMS/IXmicro TurboTV",
471 .muxsel = { 2, 3, 1, 1 },
472 .gpiomux = { 1, 1, 2, 3 },
475 .tuner_type = TUNER_TEMIC_PAL,
476 .tuner_addr = ADDR_UNSET,
477 .radio_addr = ADDR_UNSET,
479 [BTTV_BOARD_HAUPPAUGE878] = {
480 .name = "Hauppauge (bt878)",
485 .gpiomask = 0x0f, /* old: 7 */
486 .muxsel = { 2, 0, 1, 1 },
487 .gpiomux = { 0, 1, 2, 3 },
492 .tuner_addr = ADDR_UNSET,
493 .radio_addr = ADDR_UNSET,
495 [BTTV_BOARD_MIROPRO] = {
496 .name = "MIRO PCTV pro",
502 .muxsel = { 2, 3, 1, 1 },
503 .gpiomux = { 0x20001,0x10001, 0, 0 },
507 .tuner_addr = ADDR_UNSET,
508 .radio_addr = ADDR_UNSET,
511 /* ---- card 0x0c ---------------------------------- */
512 [BTTV_BOARD_ADSTECH_TV] = {
513 .name = "ADS Technologies Channel Surfer TV (bt848)",
519 .muxsel = { 2, 3, 1, 1 },
520 .gpiomux = { 13, 14, 11, 7 },
523 .tuner_addr = ADDR_UNSET,
524 .radio_addr = ADDR_UNSET,
526 [BTTV_BOARD_AVERMEDIA98] = {
527 .name = "AVerMedia TVCapture 98",
533 .muxsel = { 2, 3, 1, 1 },
534 .gpiomux = { 13, 14, 11, 7 },
538 .tuner_type = TUNER_PHILIPS_PAL,
539 .tuner_addr = ADDR_UNSET,
540 .radio_addr = ADDR_UNSET,
541 .audio_hook = avermedia_tv_stereo_audio,
545 .name = "Aimslab Video Highway Xtreme (VHX)",
551 .muxsel = { 2, 3, 1, 1 },
552 .gpiomux = { 0, 2, 1, 3 }, /* old: {0, 1, 2, 3, 4} */
557 .tuner_addr = ADDR_UNSET,
558 .radio_addr = ADDR_UNSET,
560 [BTTV_BOARD_ZOLTRIX] = {
561 .name = "Zoltrix TV-Max",
567 .muxsel = { 2, 3, 1, 1 },
568 .gpiomux = { 0, 0, 1, 0 },
572 .tuner_addr = ADDR_UNSET,
573 .radio_addr = ADDR_UNSET,
576 /* ---- card 0x10 ---------------------------------- */
577 [BTTV_BOARD_PIXVIEWPLAYTV] = {
578 .name = "Prolink Pixelview PlayTV (bt878)",
583 .gpiomask = 0x01fe00,
584 .muxsel = { 2, 3, 1, 1 },
585 /* 2003-10-20 by "Anton A. Arapov" <arapov@mail.ru> */
586 .gpiomux = { 0x001e00, 0, 0x018000, 0x014000 },
587 .gpiomute = 0x002000,
592 [BTTV_BOARD_WINVIEW_601] = {
593 .name = "Leadtek WinView 601",
598 .gpiomask = 0x8300f8,
599 .muxsel = { 2, 3, 1, 1,0 },
600 .gpiomux = { 0x4fa007,0xcfa007,0xcfa007,0xcfa007 },
601 .gpiomute = 0xcfa007,
604 .tuner_addr = ADDR_UNSET,
605 .radio_addr = ADDR_UNSET,
606 .audio_hook = winview_audio,
609 [BTTV_BOARD_AVEC_INTERCAP] = {
610 .name = "AVEC Intercapture",
616 .muxsel = { 2, 3, 1, 1 },
617 .gpiomux = { 1, 0, 0, 0 },
620 .tuner_addr = ADDR_UNSET,
621 .radio_addr = ADDR_UNSET,
623 [BTTV_BOARD_LIFE_FLYKIT] = {
624 .name = "Lifeview FlyVideo II EZ /FlyKit LR38 Bt848 (capture only)",
629 .gpiomask = 0x8dff00,
630 .muxsel = { 2, 3, 1, 1 },
634 .tuner_addr = ADDR_UNSET,
635 .radio_addr = ADDR_UNSET,
638 /* ---- card 0x14 ---------------------------------- */
639 [BTTV_BOARD_CEI_RAFFLES] = {
640 .name = "CEI Raffles Card",
645 .muxsel = { 2, 3, 1, 1 },
647 .tuner_addr = ADDR_UNSET,
648 .radio_addr = ADDR_UNSET,
650 [BTTV_BOARD_CONFERENCETV] = {
651 .name = "Lifeview FlyVideo 98/ Lucky Star Image World ConferenceTV LR50",
653 .audio_inputs = 2, /* tuner, line in */
657 .muxsel = { 2, 3, 1, 1 },
658 .gpiomux = { 0, 0x800, 0x1000, 0x1000 },
661 .tuner_type = TUNER_PHILIPS_PAL_I,
662 .tuner_addr = ADDR_UNSET,
663 .radio_addr = ADDR_UNSET,
665 [BTTV_BOARD_PHOEBE_TVMAS] = {
666 .name = "Askey CPH050/ Phoebe Tv Master + FM",
672 .muxsel = { 2, 3, 1, 1 },
673 .gpiomux = { 0, 1, 0x800, 0x400 },
678 .tuner_addr = ADDR_UNSET,
679 .radio_addr = ADDR_UNSET,
681 [BTTV_BOARD_MODTEC_205] = {
682 .name = "Modular Technology MM201/MM202/MM205/MM210/MM215 PCTV, bt878",
688 .muxsel = { 2, 3, -1 },
689 .digital_mode = DIGITAL_MODE_CAMERA,
690 .gpiomux = { 0, 0, 0, 0 },
693 .tuner_type = TUNER_ALPS_TSBB5_PAL_I,
694 .tuner_addr = ADDR_UNSET,
695 .radio_addr = ADDR_UNSET,
698 /* ---- card 0x18 ---------------------------------- */
699 [BTTV_BOARD_MAGICTVIEW061] = {
700 .name = "Askey CPH05X/06X (bt878) [many vendors]",
706 .muxsel = { 2, 3, 1, 1 },
707 .gpiomux = {0x400, 0x400, 0x400, 0x400 },
712 .tuner_addr = ADDR_UNSET,
713 .radio_addr = ADDR_UNSET,
716 [BTTV_BOARD_VOBIS_BOOSTAR] = {
717 .name = "Terratec TerraTV+ Version 1.0 (Bt848)/ Terra TValue Version 1.0/ Vobis TV-Boostar",
722 .gpiomask = 0x1f0fff,
723 .muxsel = { 2, 3, 1, 1 },
724 .gpiomux = { 0x20000, 0x30000, 0x10000, 0 },
727 .tuner_type = TUNER_PHILIPS_PAL,
728 .tuner_addr = ADDR_UNSET,
729 .radio_addr = ADDR_UNSET,
730 .audio_hook = terratv_audio,
732 [BTTV_BOARD_HAUPPAUG_WCAM] = {
733 .name = "Hauppauge WinCam newer (bt878)",
739 .muxsel = { 2, 0, 1, 1 },
740 .gpiomux = { 0, 1, 2, 3 },
744 .tuner_addr = ADDR_UNSET,
745 .radio_addr = ADDR_UNSET,
747 [BTTV_BOARD_MAXI] = {
748 .name = "Lifeview FlyVideo 98/ MAXI TV Video PCI2 LR50",
754 .muxsel = { 2, 3, 1, 1 },
755 .gpiomux = { 0, 0x800, 0x1000, 0x1000 },
758 .tuner_type = TUNER_PHILIPS_SECAM,
759 .tuner_addr = ADDR_UNSET,
760 .radio_addr = ADDR_UNSET,
763 /* ---- card 0x1c ---------------------------------- */
764 [BTTV_BOARD_TERRATV] = {
765 .name = "Terratec TerraTV+ Version 1.1 (bt878)",
770 .gpiomask = 0x1f0fff,
771 .muxsel = { 2, 3, 1, 1 },
772 .gpiomux = { 0x20000, 0x30000, 0x10000, 0x00000 },
775 .tuner_type = TUNER_PHILIPS_PAL,
776 .tuner_addr = ADDR_UNSET,
777 .radio_addr = ADDR_UNSET,
778 .audio_hook = terratv_audio,
780 External 20 pin connector (for Active Radio Upgrade board)
786 gpio05: om5610-stereo
790 gpio09+10: nIOR, nSEL ?? (bt878)
794 gpio16: u2-A0 (1st 4052bt)
797 gpio19: u4-A0 (2nd 4052)
801 00000 : Cdrom (internal audio input)
802 10000 : ext. Video audio input
811 [BTTV_BOARD_PXC200] = {
812 /* Jannik Fritsch <jannik@techfak.uni-bielefeld.de> */
813 .name = "Imagenation PXC200",
817 .svhs = 1, /* was: 4 */
819 .muxsel = { 2, 3, 1, 0, 0},
823 .tuner_addr = ADDR_UNSET,
824 .radio_addr = ADDR_UNSET,
825 .muxsel_hook = PXC200_muxsel,
828 [BTTV_BOARD_FLYVIDEO_98] = {
829 .name = "Lifeview FlyVideo 98 LR50",
834 .gpiomask = 0x1800, /* 0x8dfe00 */
835 .muxsel = { 2, 3, 1, 1 },
836 .gpiomux = { 0, 0x0800, 0x1000, 0x1000 },
840 .tuner_addr = ADDR_UNSET,
841 .radio_addr = ADDR_UNSET,
843 [BTTV_BOARD_IPROTV] = {
844 .name = "Formac iProTV, Formac ProTV I (bt848)",
850 .muxsel = { 2, 3, 1, 1 },
851 .gpiomux = { 1, 0, 0, 0 },
853 .tuner_type = TUNER_PHILIPS_PAL,
854 .tuner_addr = ADDR_UNSET,
855 .radio_addr = ADDR_UNSET,
858 /* ---- card 0x20 ---------------------------------- */
859 [BTTV_BOARD_INTEL_C_S_PCI] = {
860 .name = "Intel Create and Share PCI/ Smart Video Recorder III",
866 .muxsel = { 2, 3, 1, 1 },
870 .tuner_addr = ADDR_UNSET,
871 .radio_addr = ADDR_UNSET,
873 [BTTV_BOARD_TERRATVALUE] = {
874 .name = "Terratec TerraTValue Version Bt878",
879 .gpiomask = 0xffff00,
880 .muxsel = { 2, 3, 1, 1 },
881 .gpiomux = { 0x500, 0, 0x300, 0x900 },
885 .tuner_type = TUNER_PHILIPS_PAL,
886 .tuner_addr = ADDR_UNSET,
887 .radio_addr = ADDR_UNSET,
889 [BTTV_BOARD_WINFAST2000] = {
890 .name = "Leadtek WinFast 2000/ WinFast 2000 XP",
895 .muxsel = { 2, 3, 1, 1, 0 }, /* TV, CVid, SVid, CVid over SVid connector */
896 /* Alexander Varakin <avarakin@hotmail.com> [stereo version] */
897 .gpiomask = 0xb33000,
898 .gpiomux = { 0x122000,0x1000,0x0000,0x620000 },
899 .gpiomute = 0x800000,
900 /* Audio Routing for "WinFast 2000 XP" (no tv stereo !)
901 gpio23 -- hef4052:nEnable (0x800000)
904 0x0000: external audio
908 Note: There exists another variant "Winfast 2000" with tv stereo !?
909 Note: eeprom only contains FF and pci subsystem id 107d:6606
914 .tuner_type = 5, /* default for now, gpio reads BFFF06 for Pal bg+dk */
915 .tuner_addr = ADDR_UNSET,
916 .radio_addr = ADDR_UNSET,
917 .audio_hook = winfast2000_audio,
920 [BTTV_BOARD_CHRONOS_VS2] = {
921 .name = "Lifeview FlyVideo 98 LR50 / Chronos Video Shuttle II",
927 .muxsel = { 2, 3, 1, 1 },
928 .gpiomux = { 0, 0x800, 0x1000, 0x1000 },
932 .tuner_addr = ADDR_UNSET,
933 .radio_addr = ADDR_UNSET,
936 /* ---- card 0x24 ---------------------------------- */
937 [BTTV_BOARD_TYPHOON_TVIEW] = {
938 .name = "Lifeview FlyVideo 98FM LR50 / Typhoon TView TV/FM Tuner",
944 .muxsel = { 2, 3, 1, 1 },
945 .gpiomux = { 0, 0x800, 0x1000, 0x1000 },
949 .tuner_addr = ADDR_UNSET,
950 .radio_addr = ADDR_UNSET,
953 [BTTV_BOARD_PXELVWPLTVPRO] = {
954 .name = "Prolink PixelView PlayTV pro",
960 .muxsel = { 2, 3, 1, 1 },
961 .gpiomux = { 0x21, 0x20, 0x24, 0x2c },
966 .tuner_addr = ADDR_UNSET,
967 .radio_addr = ADDR_UNSET,
969 [BTTV_BOARD_MAGICTVIEW063] = {
970 .name = "Askey CPH06X TView99",
975 .gpiomask = 0x551e00,
976 .muxsel = { 2, 3, 1, 0 },
977 .gpiomux = { 0x551400, 0x551200, 0, 0 },
978 .gpiomute = 0x551c00,
982 .tuner_addr = ADDR_UNSET,
983 .radio_addr = ADDR_UNSET,
986 [BTTV_BOARD_PINNACLE] = {
987 .name = "Pinnacle PCTV Studio/Rave",
992 .gpiomask = 0x03000F,
993 .muxsel = { 2, 3, 1, 1 },
994 .gpiomux = { 2, 0xd0001, 0, 0 },
999 .tuner_addr = ADDR_UNSET,
1000 .radio_addr = ADDR_UNSET,
1003 /* ---- card 0x28 ---------------------------------- */
1004 [BTTV_BOARD_STB2] = {
1005 .name = "STB TV PCI FM, Gateway P/N 6000704 (bt878), 3Dfx VoodooTV 100",
1011 .muxsel = { 2, 3, 1, 1 },
1012 .gpiomux = { 4, 0, 2, 3 },
1016 .tuner_type = TUNER_PHILIPS_NTSC,
1017 .tuner_addr = ADDR_UNSET,
1018 .radio_addr = ADDR_UNSET,
1022 [BTTV_BOARD_AVPHONE98] = {
1023 .name = "AVerMedia TVPhone 98",
1029 .muxsel = { 2, 3, 1, 1 },
1030 .gpiomux = { 13, 4, 11, 7 },
1034 .tuner_addr = ADDR_UNSET,
1035 .radio_addr = ADDR_UNSET,
1037 .audio_hook = avermedia_tvphone_audio,
1039 [BTTV_BOARD_PV951] = {
1040 .name = "ProVideo PV951", /* pic16c54 */
1046 .muxsel = { 2, 3, 1, 1},
1047 .gpiomux = { 0, 0, 0, 0},
1052 .tuner_addr = ADDR_UNSET,
1053 .radio_addr = ADDR_UNSET,
1055 [BTTV_BOARD_ONAIR_TV] = {
1056 .name = "Little OnAir TV",
1062 .muxsel = { 2, 3, 1, 1 },
1063 .gpiomux = { 0xff9ff6, 0xff9ff6, 0xff1ff7, 0 },
1064 .gpiomute = 0xff3ffc,
1067 .tuner_addr = ADDR_UNSET,
1068 .radio_addr = ADDR_UNSET,
1071 /* ---- card 0x2c ---------------------------------- */
1072 [BTTV_BOARD_SIGMA_TVII_FM] = {
1073 .name = "Sigma TVII-FM",
1079 .muxsel = { 2, 3, 1, 1 },
1080 .gpiomux = { 1, 1, 0, 2 },
1085 .tuner_addr = ADDR_UNSET,
1086 .radio_addr = ADDR_UNSET,
1088 [BTTV_BOARD_MATRIX_VISION2] = {
1089 .name = "MATRIX-Vision MV-Delta 2",
1095 .muxsel = { 2, 3, 1, 0, 0 },
1100 .tuner_addr = ADDR_UNSET,
1101 .radio_addr = ADDR_UNSET,
1103 [BTTV_BOARD_ZOLTRIX_GENIE] = {
1104 .name = "Zoltrix Genie TV/FM",
1109 .gpiomask = 0xbcf03f,
1110 .muxsel = { 2, 3, 1, 1 },
1111 .gpiomux = { 0xbc803f, 0xbc903f, 0xbcb03f, 0 },
1112 .gpiomute = 0xbcb03f,
1116 .tuner_addr = ADDR_UNSET,
1117 .radio_addr = ADDR_UNSET,
1119 [BTTV_BOARD_TERRATVRADIO] = {
1120 .name = "Terratec TV/Radio+",
1125 .gpiomask = 0x70000,
1126 .muxsel = { 2, 3, 1, 1 },
1127 .gpiomux = { 0x20000, 0x30000, 0x10000, 0 },
1128 .gpiomute = 0x40000,
1133 .tuner_addr = ADDR_UNSET,
1134 .radio_addr = ADDR_UNSET,
1138 /* ---- card 0x30 ---------------------------------- */
1139 [BTTV_BOARD_DYNALINK] = {
1140 .name = "Askey CPH03x/ Dynalink Magic TView",
1146 .muxsel = { 2, 3, 1, 1 },
1147 .gpiomux = {2,0,0,0 },
1152 .tuner_addr = ADDR_UNSET,
1153 .radio_addr = ADDR_UNSET,
1155 [BTTV_BOARD_GVBCTV3PCI] = {
1156 .name = "IODATA GV-BCTV3/PCI",
1161 .gpiomask = 0x010f00,
1162 .muxsel = {2, 3, 0, 0 },
1163 .gpiomux = {0x10000, 0, 0x10000, 0 },
1166 .tuner_type = TUNER_ALPS_TSHC6_NTSC,
1167 .tuner_addr = ADDR_UNSET,
1168 .radio_addr = ADDR_UNSET,
1169 .audio_hook = gvbctv3pci_audio,
1171 [BTTV_BOARD_PXELVWPLTVPAK] = {
1172 .name = "Prolink PV-BT878P+4E / PixelView PlayTV PAK / Lenco MXTV-9578 CP",
1177 .gpiomask = 0xAA0000,
1178 .muxsel = { 2,3,1,1,-1 },
1179 .digital_mode = DIGITAL_MODE_CAMERA,
1180 .gpiomux = { 0x20000, 0, 0x80000, 0x80000 },
1181 .gpiomute = 0xa8000,
1184 .tuner_type = TUNER_PHILIPS_PAL_I,
1185 .tuner_addr = ADDR_UNSET,
1186 .radio_addr = ADDR_UNSET,
1188 /* GPIO wiring: (different from Rev.4C !)
1189 GPIO17: U4.A0 (first hef4052bt)
1191 GPIO20: U5.A1 (second hef4052bt)
1193 GPIO22: BT832 Reset Line
1194 GPIO23: A5,A0, U5,nEN
1195 Note: At i2c=0x8a is a Bt832 chip, which changes to 0x88 after being reset via GPIO22
1198 [BTTV_BOARD_EAGLE] = {
1199 .name = "Eagle Wireless Capricorn2 (bt878A)",
1205 .muxsel = { 2, 0, 1, 1 },
1206 .gpiomux = { 0, 1, 2, 3 },
1209 .tuner_type = -1 /* TUNER_ALPS_TMDH2_NTSC */,
1210 .tuner_addr = ADDR_UNSET,
1211 .radio_addr = ADDR_UNSET,
1214 /* ---- card 0x34 ---------------------------------- */
1215 [BTTV_BOARD_PINNACLEPRO] = {
1216 /* David Härdeman <david@2gen.com> */
1217 .name = "Pinnacle PCTV Studio Pro",
1222 .gpiomask = 0x03000F,
1223 .muxsel = { 2, 3, 1, 1 },
1224 .gpiomux = { 1, 0xd0001, 0, 0 },
1226 /* sound path (5 sources):
1227 MUX1 (mask 0x03), Enable Pin 0x08 (0=enable, 1=disable)
1230 2= Mono TV sound from Tuner
1232 MUX2 (mask 0x30000):
1234 1= FM stereo Radio from Tuner */
1238 .tuner_addr = ADDR_UNSET,
1239 .radio_addr = ADDR_UNSET,
1241 [BTTV_BOARD_TVIEW_RDS_FM] = {
1242 /* Claas Langbehn <claas@bigfoot.com>,
1243 Sven Grothklags <sven@upb.de> */
1244 .name = "Typhoon TView RDS + FM Stereo / KNC1 TV Station RDS",
1250 .muxsel = { 2, 3, 1, 1 },
1251 .gpiomux = { 0, 0, 0x10, 8 },
1255 .tuner_type = TUNER_PHILIPS_PAL,
1256 .tuner_addr = ADDR_UNSET,
1257 .radio_addr = ADDR_UNSET,
1260 [BTTV_BOARD_LIFETEC_9415] = {
1261 /* Tim Röstermundt <rosterm@uni-muenster.de>
1262 in de.comp.os.unix.linux.hardware:
1263 options bttv card=0 pll=1 radio=1 gpiomask=0x18e0
1264 gpiomux =0x44c71f,0x44d71f,0,0x44d71f,0x44dfff
1265 options tuner type=5 */
1266 .name = "Lifeview FlyVideo 2000 /FlyVideo A2/ Lifetec LT 9415 TV [LR90]",
1272 .muxsel = { 2, 3, 1, 1 },
1273 .gpiomux = { 0x0000,0x0800,0x1000,0x1000 },
1275 /* For cards with tda9820/tda9821:
1276 0x0000: Tuner normal stereo
1277 0x0080: Tuner A2 SAP (second audio program = Zweikanalton)
1278 0x0880: Tuner A2 stereo */
1281 .tuner_addr = ADDR_UNSET,
1282 .radio_addr = ADDR_UNSET,
1284 [BTTV_BOARD_BESTBUY_EASYTV] = {
1285 /* Miguel Angel Alvarez <maacruz@navegalia.com>
1286 old Easy TV BT848 version (model CPH031) */
1287 .name = "Askey CPH031/ BESTBUY Easy TV",
1293 .muxsel = { 2, 3, 1, 0 },
1294 .gpiomux = { 2, 0, 0, 0 },
1298 .tuner_type = TUNER_TEMIC_PAL,
1299 .tuner_addr = ADDR_UNSET,
1300 .radio_addr = ADDR_UNSET,
1303 /* ---- card 0x38 ---------------------------------- */
1304 [BTTV_BOARD_FLYVIDEO_98FM] = {
1305 /* Gordon Heydon <gjheydon@bigfoot.com ('98) */
1306 .name = "Lifeview FlyVideo 98FM LR50",
1312 .muxsel = { 2, 3, 1, 1 },
1313 .gpiomux = { 0, 0x800, 0x1000, 0x1000 },
1317 .tuner_addr = ADDR_UNSET,
1318 .radio_addr = ADDR_UNSET,
1320 /* This is the ultimate cheapo capture card
1321 * just a BT848A on a small PCB!
1322 * Steve Hosgood <steve@equiinet.com> */
1323 [BTTV_BOARD_GRANDTEC] = {
1324 .name = "GrandTec 'Grand Video Capture' (Bt848)",
1336 .tuner_addr = ADDR_UNSET,
1337 .radio_addr = ADDR_UNSET,
1339 [BTTV_BOARD_ASKEY_CPH060] = {
1340 /* Daniel Herrington <daniel.herrington@home.com> */
1341 .name = "Askey CPH060/ Phoebe TV Master Only (No FM)",
1347 .muxsel = { 2, 3, 1, 1},
1348 .gpiomux = { 0x400, 0x400, 0x400, 0x400 },
1352 .tuner_type = TUNER_TEMIC_4036FY5_NTSC,
1353 .tuner_addr = ADDR_UNSET,
1354 .radio_addr = ADDR_UNSET,
1356 [BTTV_BOARD_ASKEY_CPH03X] = {
1357 /* Matti Mottus <mottus@physic.ut.ee> */
1358 .name = "Askey CPH03x TV Capturer",
1363 .gpiomask = 0x03000F,
1364 .muxsel = { 2, 3, 1, 0 },
1365 .gpiomux = { 2, 0, 0, 0 },
1369 .tuner_addr = ADDR_UNSET,
1370 .radio_addr = ADDR_UNSET,
1373 /* ---- card 0x3c ---------------------------------- */
1374 [BTTV_BOARD_MM100PCTV] = {
1375 /* Philip Blundell <philb@gnu.org> */
1376 .name = "Modular Technology MM100PCTV",
1382 .muxsel = { 2, 3, 1, 1 },
1383 .gpiomux = { 2, 0, 0, 1 },
1386 .tuner_type = TUNER_TEMIC_PAL,
1387 .tuner_addr = ADDR_UNSET,
1388 .radio_addr = ADDR_UNSET,
1390 [BTTV_BOARD_GMV1] = {
1391 /* Adrian Cox <adrian@humboldt.co.uk */
1392 .name = "AG Electronics GMV1",
1404 .tuner_addr = ADDR_UNSET,
1405 .radio_addr = ADDR_UNSET,
1407 [BTTV_BOARD_BESTBUY_EASYTV2] = {
1408 /* Miguel Angel Alvarez <maacruz@navegalia.com>
1409 new Easy TV BT878 version (model CPH061)
1410 special thanks to Informatica Mieres for providing the card */
1411 .name = "Askey CPH061/ BESTBUY Easy TV (bt878)",
1417 .muxsel = { 2, 3, 1, 0 },
1418 .gpiomux = { 1, 0, 4, 4 },
1422 .tuner_type = TUNER_PHILIPS_PAL,
1423 .tuner_addr = ADDR_UNSET,
1424 .radio_addr = ADDR_UNSET,
1426 [BTTV_BOARD_ATI_TVWONDER] = {
1427 /* Lukas Gebauer <geby@volny.cz> */
1428 .name = "ATI TV-Wonder",
1434 .muxsel = { 2, 3, 1, 0 },
1435 .gpiomux = { 0xbffe, 0, 0xbfff, 0 },
1438 .tuner_type = TUNER_TEMIC_4006FN5_MULTI_PAL,
1439 .tuner_addr = ADDR_UNSET,
1440 .radio_addr = ADDR_UNSET,
1443 /* ---- card 0x40 ---------------------------------- */
1444 [BTTV_BOARD_ATI_TVWONDERVE] = {
1445 /* Lukas Gebauer <geby@volny.cz> */
1446 .name = "ATI TV-Wonder VE",
1452 .muxsel = { 2, 3, 0, 1 },
1453 .gpiomux = { 0, 0, 1, 0 },
1456 .tuner_type = TUNER_TEMIC_4006FN5_MULTI_PAL,
1457 .tuner_addr = ADDR_UNSET,
1458 .radio_addr = ADDR_UNSET,
1460 [BTTV_BOARD_FLYVIDEO2000] = {
1461 /* DeeJay <deejay@westel900.net (2000S) */
1462 .name = "Lifeview FlyVideo 2000S LR90",
1468 .muxsel = { 2, 3, 0, 1 },
1469 /* Radio changed from 1e80 to 0x800 to make
1470 FlyVideo2000S in .hu happy (gm)*/
1471 /* -dk-???: set mute=0x1800 for tda9874h daughterboard */
1472 .gpiomux = { 0x0000,0x0800,0x1000,0x1000 },
1474 .audio_hook = fv2000s_audio,
1480 .tuner_addr = ADDR_UNSET,
1481 .radio_addr = ADDR_UNSET,
1483 [BTTV_BOARD_TERRATVALUER] = {
1484 .name = "Terratec TValueRadio",
1489 .gpiomask = 0xffff00,
1490 .muxsel = { 2, 3, 1, 1 },
1491 .gpiomux = { 0x500, 0x500, 0x300, 0x900 },
1495 .tuner_type = TUNER_PHILIPS_PAL,
1496 .tuner_addr = ADDR_UNSET,
1497 .radio_addr = ADDR_UNSET,
1500 [BTTV_BOARD_GVBCTV4PCI] = {
1501 /* TANAKA Kei <peg00625@nifty.com> */
1502 .name = "IODATA GV-BCTV4/PCI",
1507 .gpiomask = 0x010f00,
1508 .muxsel = {2, 3, 0, 0 },
1509 .gpiomux = {0x10000, 0, 0x10000, 0 },
1512 .tuner_type = TUNER_SHARP_2U5JF5540_NTSC,
1513 .tuner_addr = ADDR_UNSET,
1514 .radio_addr = ADDR_UNSET,
1515 .audio_hook = gvbctv3pci_audio,
1518 /* ---- card 0x44 ---------------------------------- */
1519 [BTTV_BOARD_VOODOOTV_FM] = {
1520 .name = "3Dfx VoodooTV FM (Euro)",
1521 /* try "insmod msp3400 simple=0" if you have
1522 * sound problems with this card. */
1527 .gpiomask = 0x4f8a00,
1528 /* 0x100000: 1=MSP enabled (0=disable again)
1529 * 0x010000: Connected to "S0" on tda9880 (0=Pal/BG, 1=NTSC) */
1530 .gpiomux = {0x947fff, 0x987fff,0x947fff,0x947fff },
1531 .gpiomute = 0x947fff,
1532 /* tvtuner, radio, external,internal, mute, stereo
1533 * tuner, Composit, SVid, Composit-on-Svid-adapter */
1534 .muxsel = { 2, 3 ,0 ,1 },
1535 .tuner_type = TUNER_MT2032,
1536 .tuner_addr = ADDR_UNSET,
1537 .radio_addr = ADDR_UNSET,
1541 [BTTV_BOARD_VOODOOTV_200] = {
1542 .name = "VoodooTV 200 (USA)",
1543 /* try "insmod msp3400 simple=0" if you have
1544 * sound problems with this card. */
1549 .gpiomask = 0x4f8a00,
1550 /* 0x100000: 1=MSP enabled (0=disable again)
1551 * 0x010000: Connected to "S0" on tda9880 (0=Pal/BG, 1=NTSC) */
1552 .gpiomux = {0x947fff, 0x987fff,0x947fff,0x947fff },
1553 .gpiomute = 0x947fff,
1554 /* tvtuner, radio, external,internal, mute, stereo
1555 * tuner, Composit, SVid, Composit-on-Svid-adapter */
1556 .muxsel = { 2, 3 ,0 ,1 },
1557 .tuner_type = TUNER_MT2032,
1558 .tuner_addr = ADDR_UNSET,
1559 .radio_addr = ADDR_UNSET,
1563 [BTTV_BOARD_AIMMS] = {
1564 /* Philip Blundell <pb@nexus.co.uk> */
1565 .name = "Active Imaging AIMMS",
1570 .tuner_addr = ADDR_UNSET,
1571 .radio_addr = ADDR_UNSET,
1576 [BTTV_BOARD_PV_BT878P_PLUS] = {
1577 /* Tomasz Pyra <hellfire@sedez.iq.pl> */
1578 .name = "Prolink Pixelview PV-BT878P+ (Rev.4C,8E)",
1584 .muxsel = { 2, 3, 1, 1 },
1585 .gpiomux = { 0, 0, 11, 7 }, /* TV and Radio with same GPIO ! */
1590 .tuner_addr = ADDR_UNSET,
1591 .radio_addr = ADDR_UNSET,
1594 GPIO0: U4.A0 (hef4052bt)
1596 GPIO2: U4.A1 (second hef4052bt)
1597 GPIO3: U4.nEN, U5.A0, A5.nEN
1601 [BTTV_BOARD_FLYVIDEO98EZ] = {
1602 .name = "Lifeview FlyVideo 98EZ (capture only) LR51",
1607 .muxsel = { 2, 3, 1, 1 }, /* AV1, AV2, SVHS, CVid adapter on SVHS */
1610 .tuner_type = UNSET,
1611 .tuner_addr = ADDR_UNSET,
1612 .radio_addr = ADDR_UNSET,
1615 /* ---- card 0x48 ---------------------------------- */
1616 [BTTV_BOARD_PV_BT878P_9B] = {
1617 /* Dariusz Kowalewski <darekk@automex.pl> */
1618 .name = "Prolink Pixelview PV-BT878P+9B (PlayTV Pro rev.9B FM+NICAM)",
1624 .muxsel = { 2, 3, 1, 1 },
1625 .gpiomux = { 0x01, 0x00, 0x03, 0x03 },
1632 .tuner_addr = ADDR_UNSET,
1633 .radio_addr = ADDR_UNSET,
1634 .audio_hook = pvbt878p9b_audio, /* Note: not all cards have stereo */
1635 .has_radio = 1, /* Note: not all cards have radio */
1642 GPIO20,22,23: R30,R29,R28
1645 [BTTV_BOARD_SENSORAY311] = {
1646 /* Clay Kunz <ckunz@mail.arc.nasa.gov> */
1647 /* you must jumper JP5 for the card to work */
1648 .name = "Sensoray 311",
1654 .muxsel = { 2, 3, 1, 0, 0 },
1658 .tuner_addr = ADDR_UNSET,
1659 .radio_addr = ADDR_UNSET,
1661 [BTTV_BOARD_RV605] = {
1662 /* Miguel Freitas <miguel@cetuc.puc-rio.br> */
1663 .name = "RemoteVision MX (RV605)",
1669 .gpiomask2 = 0x07ff,
1670 .muxsel = { 0x33, 0x13, 0x23, 0x43, 0xf3, 0x73, 0xe3, 0x03,
1671 0xd3, 0xb3, 0xc3, 0x63, 0x93, 0x53, 0x83, 0xa3 },
1675 .tuner_addr = ADDR_UNSET,
1676 .radio_addr = ADDR_UNSET,
1677 .muxsel_hook = rv605_muxsel,
1679 [BTTV_BOARD_POWERCLR_MTV878] = {
1680 .name = "Powercolor MTV878/ MTV878R/ MTV878F",
1685 .gpiomask = 0x1C800F, /* Bit0-2: Audio select, 8-12:remote control 14:remote valid 15:remote reset */
1686 .muxsel = { 2, 1, 1, },
1687 .gpiomux = { 0, 1, 2, 2 },
1690 .tuner_type = TUNER_PHILIPS_PAL,
1691 .tuner_addr = ADDR_UNSET,
1692 .radio_addr = ADDR_UNSET,
1697 /* ---- card 0x4c ---------------------------------- */
1698 [BTTV_BOARD_WINDVR] = {
1699 /* Masaki Suzuki <masaki@btree.org> */
1700 .name = "Canopus WinDVR PCI (COMPAQ Presario 3524JP, 5112JP)",
1705 .gpiomask = 0x140007,
1706 .muxsel = { 2, 3, 1, 1 },
1707 .gpiomux = { 0, 1, 2, 3 },
1709 .tuner_type = TUNER_PHILIPS_NTSC,
1710 .tuner_addr = ADDR_UNSET,
1711 .radio_addr = ADDR_UNSET,
1712 .audio_hook = windvr_audio,
1714 [BTTV_BOARD_GRANDTEC_MULTI] = {
1715 .name = "GrandTec Multi Capture Card (Bt878)",
1721 .muxsel = { 2, 3, 1, 0 },
1727 .tuner_addr = ADDR_UNSET,
1728 .radio_addr = ADDR_UNSET,
1730 [BTTV_BOARD_KWORLD] = {
1731 .name = "Jetway TV/Capture JW-TV878-FBK, Kworld KW-TV878RF",
1737 .muxsel = { 2, 3, 1, 1 }, /* Tuner, SVid, SVHS, SVid to SVHS connector */
1738 .gpiomux = { 0, 0, 4, 4 },/* Yes, this tuner uses the same audio output for TV and FM radio!
1739 * This card lacks external Audio In, so we mute it on Ext. & Int.
1740 * The PCB can take a sbx1637/sbx1673, wiring unknown.
1741 * This card lacks PCI subsystem ID, sigh.
1742 * gpiomux =1: lower volume, 2+3: mute
1743 * btwincap uses 0x80000/0x80003
1750 .tuner_addr = ADDR_UNSET,
1751 .radio_addr = ADDR_UNSET,
1752 /* Samsung TCPA9095PC27A (BG+DK), philips compatible, w/FM, stereo and
1753 radio signal strength indicators work fine. */
1756 GPIO0,1: HEF4052 A0,A1
1757 GPIO2: HEF4052 nENABLE
1759 GPIO8-13: IRDC357 data0-5 (data6 n.c. ?) [chip not present on my card]
1763 ?? : mtu8b56ep microcontroller for IR (GPIO wiring unknown)*/
1765 [BTTV_BOARD_DSP_TCVIDEO] = {
1766 /* Arthur Tetzlaff-Deas, DSP Design Ltd <software@dspdesign.com> */
1767 .name = "DSP Design TCVIDEO",
1770 .muxsel = { 2, 3, 1, 0 },
1773 .tuner_addr = ADDR_UNSET,
1774 .radio_addr = ADDR_UNSET,
1777 /* ---- card 0x50 ---------------------------------- */
1778 [BTTV_BOARD_HAUPPAUGEPVR] = {
1779 .name = "Hauppauge WinTV PVR",
1784 .muxsel = { 2, 0, 1, 1 },
1788 .tuner_addr = ADDR_UNSET,
1789 .radio_addr = ADDR_UNSET,
1794 [BTTV_BOARD_GVBCTV5PCI] = {
1795 .name = "IODATA GV-BCTV5/PCI",
1800 .gpiomask = 0x0f0f80,
1801 .muxsel = {2, 3, 1, 0 },
1802 .gpiomux = {0x030000, 0x010000, 0, 0 },
1803 .gpiomute = 0x020000,
1806 .tuner_type = TUNER_PHILIPS_NTSC_M,
1807 .tuner_addr = ADDR_UNSET,
1808 .radio_addr = ADDR_UNSET,
1809 .audio_hook = gvbctv5pci_audio,
1812 [BTTV_BOARD_OSPREY1x0] = {
1813 .name = "Osprey 100/150 (878)", /* 0x1(2|3)-45C6-C1 */
1814 .video_inputs = 4, /* id-inputs-clock */
1818 .muxsel = { 3, 2, 0, 1 },
1821 .tuner_addr = ADDR_UNSET,
1822 .radio_addr = ADDR_UNSET,
1827 [BTTV_BOARD_OSPREY1x0_848] = {
1828 .name = "Osprey 100/150 (848)", /* 0x04-54C0-C1 & older boards */
1833 .muxsel = { 2, 3, 1 },
1836 .tuner_addr = ADDR_UNSET,
1837 .radio_addr = ADDR_UNSET,
1843 /* ---- card 0x54 ---------------------------------- */
1844 [BTTV_BOARD_OSPREY101_848] = {
1845 .name = "Osprey 101 (848)", /* 0x05-40C0-C1 */
1853 .tuner_addr = ADDR_UNSET,
1854 .radio_addr = ADDR_UNSET,
1859 [BTTV_BOARD_OSPREY1x1] = {
1860 .name = "Osprey 101/151", /* 0x1(4|5)-0004-C4 */
1868 .tuner_addr = ADDR_UNSET,
1869 .radio_addr = ADDR_UNSET,
1874 [BTTV_BOARD_OSPREY1x1_SVID] = {
1875 .name = "Osprey 101/151 w/ svid", /* 0x(16|17|20)-00C4-C1 */
1883 .tuner_addr = ADDR_UNSET,
1884 .radio_addr = ADDR_UNSET,
1889 [BTTV_BOARD_OSPREY2xx] = {
1890 .name = "Osprey 200/201/250/251", /* 0x1(8|9|E|F)-0004-C4 */
1897 .tuner_type = UNSET,
1898 .tuner_addr = ADDR_UNSET,
1899 .radio_addr = ADDR_UNSET,
1905 /* ---- card 0x58 ---------------------------------- */
1906 [BTTV_BOARD_OSPREY2x0_SVID] = {
1907 .name = "Osprey 200/250", /* 0x1(A|B)-00C4-C1 */
1914 .tuner_type = UNSET,
1915 .tuner_addr = ADDR_UNSET,
1916 .radio_addr = ADDR_UNSET,
1921 [BTTV_BOARD_OSPREY2x0] = {
1922 .name = "Osprey 210/220/230", /* 0x1(A|B)-04C0-C1 */
1929 .tuner_type = UNSET,
1930 .tuner_addr = ADDR_UNSET,
1931 .radio_addr = ADDR_UNSET,
1936 [BTTV_BOARD_OSPREY500] = {
1937 .name = "Osprey 500", /* 500 */
1945 .tuner_addr = ADDR_UNSET,
1946 .radio_addr = ADDR_UNSET,
1951 [BTTV_BOARD_OSPREY540] = {
1952 .name = "Osprey 540", /* 540 */
1958 .tuner_addr = ADDR_UNSET,
1959 .radio_addr = ADDR_UNSET,
1965 /* ---- card 0x5C ---------------------------------- */
1966 [BTTV_BOARD_OSPREY2000] = {
1967 .name = "Osprey 2000", /* 2000 */
1974 .tuner_type = UNSET,
1975 .tuner_addr = ADDR_UNSET,
1976 .radio_addr = ADDR_UNSET,
1979 .no_tda7432 = 1, /* must avoid, conflicts with the bt860 */
1981 [BTTV_BOARD_IDS_EAGLE] = {
1982 /* M G Berberich <berberic@forwiss.uni-passau.de> */
1983 .name = "IDS Eagle",
1988 .tuner_addr = ADDR_UNSET,
1989 .radio_addr = ADDR_UNSET,
1992 .muxsel = { 0, 1, 2, 3 },
1993 .muxsel_hook = eagle_muxsel,
1998 [BTTV_BOARD_PINNACLESAT] = {
1999 .name = "Pinnacle PCTV Sat",
2005 .tuner_addr = ADDR_UNSET,
2006 .radio_addr = ADDR_UNSET,
2015 [BTTV_BOARD_FORMAC_PROTV] = {
2016 .name = "Formac ProTV II (bt878)",
2022 /* TV, Comp1, Composite over SVID con, SVID */
2023 .muxsel = { 2, 3, 1, 1 },
2024 .gpiomux = { 2, 2, 0, 0 },
2027 .tuner_type = TUNER_PHILIPS_PAL,
2028 .tuner_addr = ADDR_UNSET,
2029 .radio_addr = ADDR_UNSET,
2031 GPIO=0x00,0x01,0x03: mute (?)
2032 0x02: both TV and radio (tuner: FM1216/I)
2033 The card has onboard audio connectors labeled "cdrom" and "board",
2034 not soldered here, though unknown wiring.
2035 Card lacks: external audio in, pci subsystem id.
2039 /* ---- card 0x60 ---------------------------------- */
2040 [BTTV_BOARD_MACHTV] = {
2047 .muxsel = { 2, 3, 1, 1},
2048 .gpiomux = { 0, 1, 2, 3},
2052 .tuner_addr = ADDR_UNSET,
2053 .radio_addr = ADDR_UNSET,
2056 [BTTV_BOARD_EURESYS_PICOLO] = {
2057 .name = "Euresys Picolo",
2066 .muxsel = { 2, 0, 1},
2068 .tuner_type = UNSET,
2069 .tuner_addr = ADDR_UNSET,
2070 .radio_addr = ADDR_UNSET,
2072 [BTTV_BOARD_PV150] = {
2073 /* Luc Van Hoeylandt <luc@e-magic.be> */
2074 .name = "ProVideo PV150", /* 0x4f */
2085 .tuner_type = UNSET,
2086 .tuner_addr = ADDR_UNSET,
2087 .radio_addr = ADDR_UNSET,
2089 [BTTV_BOARD_AD_TVK503] = {
2090 /* Hiroshi Takekawa <sian@big.or.jp> */
2091 /* This card lacks subsystem ID */
2092 .name = "AD-TVK503", /* 0x63 */
2097 .gpiomask = 0x001e8007,
2098 .muxsel = { 2, 3, 1, 0 },
2099 /* Tuner, Radio, external, internal, off, on */
2100 .gpiomux = { 0x08, 0x0f, 0x0a, 0x08 },
2106 .tuner_addr = ADDR_UNSET,
2107 .radio_addr = ADDR_UNSET,
2108 .audio_hook = adtvk503_audio,
2111 /* ---- card 0x64 ---------------------------------- */
2112 [BTTV_BOARD_HERCULES_SM_TV] = {
2113 .name = "Hercules Smart TV Stereo",
2119 .muxsel = { 2, 3, 1, 1 },
2124 .tuner_addr = ADDR_UNSET,
2125 .radio_addr = ADDR_UNSET,
2127 - card lacks subsystem ID
2128 - stereo variant w/ daughter board with tda9874a @0xb0
2130 always from tda9874 independent of GPIO (?)
2131 external line in: unknown
2132 - Other chips: em78p156elp @ 0x96 (probably IR remote control)
2133 hef4053 (instead 4052) for unknown function
2136 [BTTV_BOARD_PACETV] = {
2137 .name = "Pace TV & Radio Card",
2142 .muxsel = { 2, 3, 1, 1 }, /* Tuner, CVid, SVid, CVid over SVid connector */
2147 .tuner_addr = ADDR_UNSET,
2148 .radio_addr = ADDR_UNSET,
2151 /* Bt878, Bt832, FI1246 tuner; no pci subsystem id
2152 only internal line out: (4pin header) RGGL
2153 Radio must be decoded by msp3410d (not routed through)*/
2155 .digital_mode = DIGITAL_MODE_CAMERA, todo!
2158 [BTTV_BOARD_IVC200] = {
2159 /* Chris Willing <chris@vislab.usyd.edu.au> */
2165 .tuner_addr = ADDR_UNSET,
2166 .radio_addr = ADDR_UNSET,
2172 [BTTV_BOARD_XGUARD] = {
2173 .name = "Grand X-Guard / Trust 814PCI",
2179 .tuner_addr = ADDR_UNSET,
2180 .radio_addr = ADDR_UNSET,
2182 .muxsel = { 2,2,2,2, 3,3,3,3, 1,1,1,1, 0,0,0,0 },
2183 .muxsel_hook = xguard_muxsel,
2190 /* ---- card 0x68 ---------------------------------- */
2191 [BTTV_BOARD_NEBULA_DIGITV] = {
2192 .name = "Nebula Electronics DigiTV",
2196 .muxsel = { 2, 3, 1, 0 },
2202 .tuner_addr = ADDR_UNSET,
2203 .radio_addr = ADDR_UNSET,
2209 [BTTV_BOARD_PV143] = {
2210 /* Jorge Boncompte - DTI2 <jorge@dti2.net> */
2211 .name = "ProVideo PV143",
2217 .muxsel = { 2, 3, 1, 0 },
2223 .tuner_addr = ADDR_UNSET,
2224 .radio_addr = ADDR_UNSET,
2226 [BTTV_BOARD_VD009X1_MINIDIN] = {
2227 /* M.Klahr@phytec.de */
2228 .name = "PHYTEC VD-009-X1 MiniDIN (bt878)",
2231 .tuner = -1, /* card has no tuner */
2234 .muxsel = { 2, 3, 1, 0 },
2235 .gpiomux = { 0, 0, 0, 0 }, /* card has no audio */
2239 .tuner_addr = ADDR_UNSET,
2240 .radio_addr = ADDR_UNSET,
2242 [BTTV_BOARD_VD009X1_COMBI] = {
2243 .name = "PHYTEC VD-009-X1 Combi (bt878)",
2246 .tuner = -1, /* card has no tuner */
2249 .muxsel = { 2, 3, 1, 1 },
2250 .gpiomux = { 0, 0, 0, 0 }, /* card has no audio */
2254 .tuner_addr = ADDR_UNSET,
2255 .radio_addr = ADDR_UNSET,
2258 /* ---- card 0x6c ---------------------------------- */
2259 [BTTV_BOARD_VD009_MINIDIN] = {
2260 .name = "PHYTEC VD-009 MiniDIN (bt878)",
2263 .tuner = -1, /* card has no tuner */
2266 .gpiomask2 = 0x03, /* gpiomask2 defines the bits used to switch audio
2267 via the upper nibble of muxsel. here: used for
2268 xternal video-mux */
2269 .muxsel = { 0x02, 0x12, 0x22, 0x32, 0x03, 0x13, 0x23, 0x33, 0x01, 0x00 },
2270 .gpiomux = { 0, 0, 0, 0 }, /* card has no audio */
2274 .tuner_addr = ADDR_UNSET,
2275 .radio_addr = ADDR_UNSET,
2277 [BTTV_BOARD_VD009_COMBI] = {
2278 .name = "PHYTEC VD-009 Combi (bt878)",
2281 .tuner = -1, /* card has no tuner */
2284 .gpiomask2 = 0x03, /* gpiomask2 defines the bits used to switch audio
2285 via the upper nibble of muxsel. here: used for
2286 xternal video-mux */
2287 .muxsel = { 0x02, 0x12, 0x22, 0x32, 0x03, 0x13, 0x23, 0x33, 0x01, 0x01 },
2288 .gpiomux = { 0, 0, 0, 0 }, /* card has no audio */
2292 .tuner_addr = ADDR_UNSET,
2293 .radio_addr = ADDR_UNSET,
2295 [BTTV_BOARD_IVC100] = {
2301 .tuner_addr = ADDR_UNSET,
2302 .radio_addr = ADDR_UNSET,
2305 .muxsel = { 2, 3, 1, 0 },
2308 [BTTV_BOARD_IVC120] = {
2309 /* IVC-120G - Alan Garfield <alan@fromorbit.com> */
2312 .audio_inputs = 0, /* card has no audio */
2313 .tuner = -1, /* card has no tuner */
2315 .tuner_addr = ADDR_UNSET,
2316 .radio_addr = ADDR_UNSET,
2317 .svhs = -1, /* card has no svhs */
2323 .muxsel = { 0x01, 0x02, 0x03, 0x04, 0x05, 0x06, 0x07, 0x08,
2324 0x09, 0x0a, 0x0b, 0x0c, 0x0d, 0x0e, 0x0f, 0x10 },
2325 .muxsel_hook = ivc120_muxsel,
2329 /* ---- card 0x70 ---------------------------------- */
2330 [BTTV_BOARD_PC_HDTV] = {
2331 .name = "pcHDTV HD-2000 TV",
2336 .muxsel = { 2, 3, 1, 0 },
2337 .tuner_type = TUNER_PHILIPS_ATSC,
2338 .tuner_addr = ADDR_UNSET,
2339 .radio_addr = ADDR_UNSET,
2342 [BTTV_BOARD_TWINHAN_DST] = {
2343 .name = "Twinhan DST + clones",
2347 .tuner_type = TUNER_ABSENT,
2348 .tuner_addr = ADDR_UNSET,
2349 .radio_addr = ADDR_UNSET,
2353 [BTTV_BOARD_WINFASTVC100] = {
2354 .name = "Winfast VC100",
2359 .muxsel = { 3, 1, 1, 3 }, /* Vid In, SVid In, Vid over SVid in connector */
2363 .tuner_type = TUNER_ABSENT,
2364 .tuner_addr = ADDR_UNSET,
2365 .radio_addr = ADDR_UNSET,
2368 [BTTV_BOARD_TEV560] = {
2369 .name = "Teppro TEV-560/InterVision IV-560",
2375 .muxsel = { 2, 3, 1, 1 },
2376 .gpiomux = { 1, 1, 1, 1 },
2378 .tuner_type = TUNER_PHILIPS_PAL,
2379 .tuner_addr = ADDR_UNSET,
2380 .radio_addr = ADDR_UNSET,
2384 /* ---- card 0x74 ---------------------------------- */
2385 [BTTV_BOARD_SIMUS_GVC1100] = {
2386 .name = "SIMUS GVC1100",
2392 .tuner_addr = ADDR_UNSET,
2393 .radio_addr = ADDR_UNSET,
2395 .muxsel = { 2, 2, 2, 2 },
2397 .muxsel_hook = gvc1100_muxsel,
2399 [BTTV_BOARD_NGSTV_PLUS] = {
2400 /* Carlos Silva r3pek@r3pek.homelinux.org || card 0x75 */
2401 .name = "NGS NGSTV+",
2405 .gpiomask = 0x008007,
2406 .muxsel = { 2, 3, 0, 0 },
2407 .gpiomux = { 0, 0, 0, 0 },
2408 .gpiomute = 0x000003,
2410 .tuner_type = TUNER_PHILIPS_PAL,
2411 .tuner_addr = ADDR_UNSET,
2412 .radio_addr = ADDR_UNSET,
2415 [BTTV_BOARD_LMLBT4] = {
2416 /* http://linuxmedialabs.com */
2418 .video_inputs = 4, /* IN1,IN2,IN3,IN4 */
2422 .muxsel = { 2, 3, 1, 0 },
2428 .tuner_addr = ADDR_UNSET,
2429 .radio_addr = ADDR_UNSET,
2431 [BTTV_BOARD_TEKRAM_M205] = {
2432 /* Helmroos Harri <harri.helmroos@pp.inet.fi> */
2433 .name = "Tekram M205 PRO",
2437 .tuner_type = TUNER_PHILIPS_PAL,
2438 .tuner_addr = ADDR_UNSET,
2439 .radio_addr = ADDR_UNSET,
2443 .muxsel = { 2, 3, 1 },
2444 .gpiomux = { 0x68, 0x68, 0x61, 0x61 },
2448 /* ---- card 0x78 ---------------------------------- */
2449 [BTTV_BOARD_CONTVFMI] = {
2450 /* Javier Cendan Ares <jcendan@lycos.es> */
2451 /* bt878 TV + FM without subsystem ID */
2452 .name = "Conceptronic CONTVFMi",
2457 .gpiomask = 0x008007,
2458 .muxsel = { 2, 3, 1, 1 },
2459 .gpiomux = { 0, 1, 2, 2 },
2463 .tuner_type = TUNER_PHILIPS_PAL,
2464 .tuner_addr = ADDR_UNSET,
2465 .radio_addr = ADDR_UNSET,
2469 [BTTV_BOARD_PICOLO_TETRA_CHIP] = {
2470 /*Eric DEBIEF <debief@telemsa.com>*/
2471 /*EURESYS Picolo Tetra : 4 Conexant Fusion 878A, no audio, video input set with analog multiplexers GPIO controled*/
2472 /* adds picolo_tetra_muxsel(), picolo_tetra_init(), the folowing declaration strucure, and #define BTTV_BOARD_PICOLO_TETRA_CHIP*/
2474 .name = "Euresys Picolo Tetra",
2480 .gpiomask2 = 0x3C<<16,/*Set the GPIO[18]->GPIO[21] as output pin.==> drive the video inputs through analog multiplexers*/
2484 .muxsel = {2,2,2,2},/*878A input is always MUX0, see above.*/
2485 .gpiomux = { 0, 0, 0, 0 }, /* card has no audio */
2488 .muxsel_hook = picolo_tetra_muxsel,/*Required as it doesn't follow the classic input selection policy*/
2490 .tuner_addr = ADDR_UNSET,
2491 .radio_addr = ADDR_UNSET,
2493 [BTTV_BOARD_SPIRIT_TV] = {
2494 /* Spirit TV Tuner from http://spiritmodems.com.au */
2495 /* Stafford Goodsell <surge@goliath.homeunix.org> */
2496 .name = "Spirit TV Tuner",
2501 .gpiomask = 0x0000000f,
2502 .muxsel = { 2, 1, 1 },
2503 .gpiomux = { 0x02, 0x00, 0x00, 0x00 },
2504 .tuner_type = TUNER_TEMIC_PAL,
2505 .tuner_addr = ADDR_UNSET,
2506 .radio_addr = ADDR_UNSET,
2510 [BTTV_BOARD_AVDVBT_771] = {
2511 /* Wolfram Joost <wojo@frokaschwei.de> */
2512 .name = "AVerMedia AVerTV DVB-T 771",
2516 .tuner_type = TUNER_ABSENT,
2517 .tuner_addr = ADDR_UNSET,
2518 .radio_addr = ADDR_UNSET,
2519 .muxsel = { 3 , 3 },
2528 /* ---- card 0x7c ---------------------------------- */
2529 [BTTV_BOARD_AVDVBT_761] = {
2530 /* Matt Jesson <dvb@jesson.eclipse.co.uk> */
2531 /* Based on the Nebula card data - added remote and new card number - BTTV_BOARD_AVDVBT_761, see also ir-kbd-gpio.c */
2532 .name = "AverMedia AverTV DVB-T 761",
2536 .muxsel = { 3, 1, 2, 0 }, /* Comp0, S-Video, ?, ? */
2542 .tuner_addr = ADDR_UNSET,
2543 .radio_addr = ADDR_UNSET,
2548 [BTTV_BOARD_MATRIX_VISIONSQ] = {
2549 /* andre.schwarz@matrix-vision.de */
2550 .name = "MATRIX Vision Sigma-SQ",
2556 .muxsel = { 2, 2, 2, 2, 2, 2, 2, 2,
2557 3, 3, 3, 3, 3, 3, 3, 3 },
2558 .muxsel_hook = sigmaSQ_muxsel,
2563 .tuner_addr = ADDR_UNSET,
2564 .radio_addr = ADDR_UNSET,
2566 [BTTV_BOARD_MATRIX_VISIONSLC] = {
2567 /* andre.schwarz@matrix-vision.de */
2568 .name = "MATRIX Vision Sigma-SLC",
2574 .muxsel = { 2, 2, 2, 2 },
2575 .muxsel_hook = sigmaSLC_muxsel,
2580 .tuner_addr = ADDR_UNSET,
2581 .radio_addr = ADDR_UNSET,
2583 /* BTTV_BOARD_APAC_VIEWCOMP */
2584 [BTTV_BOARD_APAC_VIEWCOMP] = {
2585 /* Attila Kondoros <attila.kondoros@chello.hu> */
2586 /* bt878 TV + FM 0x00000000 subsystem ID */
2587 .name = "APAC Viewcomp 878(AMAX)",
2593 .muxsel = { 2, 3, 1, 1 },
2594 .gpiomux = { 2, 0, 0, 0 },
2598 .tuner_type = TUNER_PHILIPS_PAL,
2599 .tuner_addr = ADDR_UNSET,
2600 .radio_addr = ADDR_UNSET,
2601 .has_remote = 1, /* miniremote works, see ir-kbd-gpio.c */
2602 .has_radio = 1, /* not every card has radio */
2605 /* ---- card 0x80 ---------------------------------- */
2606 [BTTV_BOARD_DVICO_DVBT_LITE] = {
2607 /* Chris Pascoe <c.pascoe@itee.uq.edu.au> */
2608 .name = "DViCO FusionHDTV DVB-T Lite",
2617 .tuner_addr = ADDR_UNSET,
2618 .radio_addr = ADDR_UNSET,
2620 [BTTV_BOARD_VGEAR_MYVCD] = {
2621 /* Steven <photon38@pchome.com.tw> */
2622 .name = "V-Gear MyVCD",
2628 .muxsel = {2, 3, 1, 0 },
2629 .gpiomux = {0x31, 0x31, 0x31, 0x31 },
2633 .tuner_type = TUNER_PHILIPS_NTSC_M,
2634 .tuner_addr = ADDR_UNSET,
2635 .radio_addr = ADDR_UNSET,
2638 [BTTV_BOARD_SUPER_TV] = {
2639 /* Rick C <cryptdragoon@gmail.com> */
2640 .name = "Super TV Tuner",
2645 .muxsel = { 2, 3, 1, 0 },
2646 .tuner_type = TUNER_PHILIPS_NTSC,
2647 .tuner_addr = ADDR_UNSET,
2648 .radio_addr = ADDR_UNSET,
2649 .gpiomask = 0x008007,
2650 .gpiomux = { 0, 0x000001,0,0 },
2654 [BTTV_BOARD_TIBET_CS16] = {
2655 /* Chris Fanning <video4linux@haydon.net> */
2656 .name = "Tibet Systems 'Progress DVR' CS16",
2661 .muxsel = { 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2 },
2667 .tuner_addr = ADDR_UNSET,
2668 .radio_addr = ADDR_UNSET,
2669 .muxsel_hook = tibetCS16_muxsel,
2671 [BTTV_BOARD_KODICOM_4400R] = {
2672 /* Bill Brack <wbrack@mmm.com.hk> */
2674 * Note that, because of the card's wiring, the "master"
2675 * BT878A chip (i.e. the one which controls the analog switch
2676 * and must use this card type) is the 2nd one detected. The
2677 * other 3 chips should use card type 0x85, whose description
2678 * follows this one. There is a EEPROM on the card (which is
2679 * connected to the I2C of one of those other chips), but is
2680 * not currently handled. There is also a facility for a
2681 * "monitor", which is also not currently implemented.
2683 .name = "Kodicom 4400R (master)",
2688 .tuner_addr = ADDR_UNSET,
2689 .radio_addr = ADDR_UNSET,
2691 /* GPIO bits 0-9 used for analog switch:
2692 * 00 - 03: camera selector
2693 * 04 - 06: channel (controller) selector
2694 * 07: data (1->on, 0->off)
2697 * bit 16 is input from sync separator for the channel
2699 .gpiomask = 0x0003ff,
2701 .muxsel = { 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3 },
2706 .muxsel_hook = kodicom4400r_muxsel,
2708 [BTTV_BOARD_KODICOM_4400R_SL] = {
2709 /* Bill Brack <wbrack@mmm.com.hk> */
2710 /* Note that, for reasons unknown, the "master" BT878A chip (i.e. the
2711 * one which controls the analog switch, and must use the card type)
2712 * is the 2nd one detected. The other 3 chips should use this card
2715 .name = "Kodicom 4400R (slave)",
2720 .tuner_addr = ADDR_UNSET,
2721 .radio_addr = ADDR_UNSET,
2723 .gpiomask = 0x010000,
2725 .muxsel = { 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3 },
2730 .muxsel_hook = kodicom4400r_muxsel,
2732 /* ---- card 0x86---------------------------------- */
2733 [BTTV_BOARD_ADLINK_RTV24] = {
2734 /* Michael Henson <mhenson@clarityvi.com> */
2735 /* Adlink RTV24 with special unlock codes */
2736 .name = "Adlink RTV24",
2741 .muxsel = { 2, 3, 1, 0 },
2743 .tuner_addr = ADDR_UNSET,
2744 .radio_addr = ADDR_UNSET,
2747 /* ---- card 0x87---------------------------------- */
2748 [BTTV_BOARD_DVICO_FUSIONHDTV_5_LITE] = {
2749 /* Michael Krufky <mkrufky@m1k.net> */
2750 .name = "DViCO FusionHDTV 5 Lite",
2752 .tuner_type = TUNER_LG_TDVS_H06XF, /* TDVS-H064F */
2753 .tuner_addr = ADDR_UNSET,
2754 .radio_addr = ADDR_UNSET,
2758 .muxsel = { 2, 3, 1 },
2759 .gpiomask = 0x00e00007,
2760 .gpiomux = { 0x00400005, 0, 0x00000001, 0 },
2761 .gpiomute = 0x00c00007,
2767 /* ---- card 0x88---------------------------------- */
2768 [BTTV_BOARD_ACORP_Y878F] = {
2769 /* Mauro Carvalho Chehab <mchehab@infradead.org> */
2770 .name = "Acorp Y878F",
2775 .gpiomask = 0x01fe00,
2776 .muxsel = { 2, 3, 1, 1 },
2777 .gpiomux = { 0x001e00, 0, 0x018000, 0x014000 },
2778 .gpiomute = 0x002000,
2781 .tuner_type = TUNER_YMEC_TVF66T5_B_DFF,
2782 .tuner_addr = 0xc1 >>1,
2783 .radio_addr = 0xc1 >>1,
2786 /* ---- card 0x89 ---------------------------------- */
2787 [BTTV_BOARD_CONCEPTRONIC_CTVFMI2] = {
2788 .name = "Conceptronic CTVFMi v2",
2793 .gpiomask = 0x001c0007,
2794 .muxsel = { 2, 3, 1, 1 },
2795 .gpiomux = { 0, 1, 2, 2 },
2799 .tuner_type = TUNER_TENA_9533_DI,
2800 .tuner_addr = ADDR_UNSET,
2801 .radio_addr = ADDR_UNSET,
2805 /* ---- card 0x8a ---------------------------------- */
2806 [BTTV_BOARD_PV_BT878P_2E] = {
2807 .name = "Prolink Pixelview PV-BT878P+ (Rev.2E)",
2812 .gpiomask = 0x01fe00,
2813 .muxsel = { 2,3,1,1,-1 },
2814 .digital_mode = DIGITAL_MODE_CAMERA,
2815 .gpiomux = { 0x00400, 0x10400, 0x04400, 0x80000 },
2816 .gpiomute = 0x12400,
2819 .tuner_type = TUNER_LG_PAL_FM,
2820 .tuner_addr = ADDR_UNSET,
2821 .radio_addr = ADDR_UNSET,
2824 /* ---- card 0x8b ---------------------------------- */
2825 [BTTV_BOARD_PV_M4900] = {
2826 /* Sérgio Fortier <sergiofortier@yahoo.com.br> */
2827 .name = "Prolink PixelView PlayTV MPEG2 PV-M4900",
2833 .muxsel = { 2, 3, 1, 1 },
2834 .gpiomux = { 0x21, 0x20, 0x24, 0x2c },
2838 .tuner_type = TUNER_YMEC_TVF_5533MF,
2839 .tuner_addr = ADDR_UNSET,
2840 .radio_addr = ADDR_UNSET,
2844 /* ---- card 0x8c ---------------------------------- */
2845 [BTTV_BOARD_OSPREY440] = {
2846 .name = "Osprey 440",
2853 .tuner_type = UNSET,
2854 .tuner_addr = ADDR_UNSET,
2855 .radio_addr = ADDR_UNSET,
2860 /* ---- card 0x8d ---------------------------------- */
2861 [BTTV_BOARD_ASOUND_SKYEYE] = {
2862 .name = "Asound Skyeye PCTV",
2868 .muxsel = { 2, 3, 1, 1 },
2869 .gpiomux = { 2, 0, 0, 0 },
2874 .tuner_addr = ADDR_UNSET,
2875 .radio_addr = ADDR_UNSET,
2877 /* ---- card 0x8e ---------------------------------- */
2878 [BTTV_BOARD_SABRENT_TVFM] = {
2879 .name = "Sabrent TV-FM (bttv version)",
2884 .gpiomask = 0x108007,
2885 .muxsel = { 2, 3, 1, 1 },
2886 .gpiomux = { 100000, 100002, 100002, 100000 },
2891 .tuner_type = TUNER_TNF_5335MF,
2892 .tuner_addr = ADDR_UNSET,
2895 /* ---- card 0x8f ---------------------------------- */
2896 [BTTV_BOARD_HAUPPAUGE_IMPACTVCB] = {
2897 .name = "Hauppauge ImpactVCB (bt878)",
2902 .gpiomask = 0x0f, /* old: 7 */
2903 .muxsel = { 0, 1, 3, 2 }, /* Composite 0-3 */
2908 .tuner_addr = ADDR_UNSET,
2909 .radio_addr = ADDR_UNSET,
2911 [BTTV_BOARD_MACHTV_MAGICTV] = {
2912 /* Julian Calaby <julian.calaby@gmail.com>
2913 * Slightly different from original MachTV definition (0x60)
2915 * FIXME: RegSpy says gpiomask should be "0x001c800f", but it
2916 * stuffs up remote chip. Bug is a pin on the jaecs is not set
2917 * properly (methinks) causing no keyup bits being set */
2919 .name = "MagicTV", /* rebranded MachTV */
2925 .muxsel = { 2, 3, 1, 1 },
2926 .gpiomux = { 0, 1, 2, 3 },
2928 .tuner_type = TUNER_TEMIC_4009FR5_PAL,
2929 .tuner_addr = ADDR_UNSET,
2930 .radio_addr = ADDR_UNSET,
2935 [BTTV_BOARD_SSAI_SECURITY] = {
2936 .name = "SSAI Security Video Interface",
2941 .muxsel = { 0, 1, 2, 3 },
2943 .tuner_addr = ADDR_UNSET,
2944 .radio_addr = ADDR_UNSET,
2946 [BTTV_BOARD_SSAI_ULTRASOUND] = {
2947 .name = "SSAI Ultrasound Video Interface",
2952 .muxsel = { 2, 0, 1, 3 },
2954 .tuner_addr = ADDR_UNSET,
2955 .radio_addr = ADDR_UNSET,
2959 static const unsigned int bttv_num_tvcards = ARRAY_SIZE(bttv_tvcards);
2961 /* ----------------------------------------------------------------------- */
2963 static unsigned char eeprom_data[256];
2968 void __devinit bttv_idcard(struct bttv *btv)
2970 unsigned int gpiobits;
2974 /* read PCI subsystem ID */
2975 pci_read_config_word(btv->c.pci, PCI_SUBSYSTEM_ID, &tmp);
2976 btv->cardid = tmp << 16;
2977 pci_read_config_word(btv->c.pci, PCI_SUBSYSTEM_VENDOR_ID, &tmp);
2980 if (0 != btv->cardid && 0xffffffff != btv->cardid) {
2981 /* look for the card */
2982 for (type = -1, i = 0; cards[i].id != 0; i++)
2983 if (cards[i].id == btv->cardid)
2988 printk(KERN_INFO "bttv%d: detected: %s [card=%d], "
2989 "PCI subsystem ID is %04x:%04x\n",
2990 btv->c.nr,cards[type].name,cards[type].cardnr,
2991 btv->cardid & 0xffff,
2992 (btv->cardid >> 16) & 0xffff);
2993 btv->c.type = cards[type].cardnr;
2996 printk(KERN_INFO "bttv%d: subsystem: %04x:%04x (UNKNOWN)\n",
2997 btv->c.nr, btv->cardid & 0xffff,
2998 (btv->cardid >> 16) & 0xffff);
2999 printk(KERN_DEBUG "please mail id, board name and "
3000 "the correct card= insmod option to video4linux-list@redhat.com\n");
3004 /* let the user override the autodetected type */
3005 if (card[btv->c.nr] < bttv_num_tvcards)
3006 btv->c.type=card[btv->c.nr];
3008 /* print which card config we are using */
3009 printk(KERN_INFO "bttv%d: using: %s [card=%d,%s]\n",btv->c.nr,
3010 bttv_tvcards[btv->c.type].name, btv->c.type,
3011 card[btv->c.nr] < bttv_num_tvcards
3012 ? "insmod option" : "autodetected");
3014 /* overwrite gpio stuff ?? */
3015 if (UNSET == audioall && UNSET == audiomux[0])
3018 if (UNSET != audiomux[0]) {
3020 for (i = 0; i < ARRAY_SIZE(bttv_tvcards->gpiomux); i++) {
3021 bttv_tvcards[btv->c.type].gpiomux[i] = audiomux[i];
3022 gpiobits |= audiomux[i];
3025 gpiobits = audioall;
3026 for (i = 0; i < ARRAY_SIZE(bttv_tvcards->gpiomux); i++) {
3027 bttv_tvcards[btv->c.type].gpiomux[i] = audioall;
3030 bttv_tvcards[btv->c.type].gpiomask = (UNSET != gpiomask) ? gpiomask : gpiobits;
3031 printk(KERN_INFO "bttv%d: gpio config override: mask=0x%x, mux=",
3032 btv->c.nr,bttv_tvcards[btv->c.type].gpiomask);
3033 for (i = 0; i < ARRAY_SIZE(bttv_tvcards->gpiomux); i++) {
3034 printk("%s0x%x", i ? "," : "", bttv_tvcards[btv->c.type].gpiomux[i]);
3040 * (most) board specific initialisations goes here
3043 /* Some Modular Technology cards have an eeprom, but no subsystem ID */
3044 static void identify_by_eeprom(struct bttv *btv, unsigned char eeprom_data[256])
3048 if (0 == strncmp(eeprom_data,"GET MM20xPCTV",13))
3049 type = BTTV_BOARD_MODTEC_205;
3050 else if (0 == strncmp(eeprom_data+20,"Picolo",7))
3051 type = BTTV_BOARD_EURESYS_PICOLO;
3052 else if (eeprom_data[0] == 0x84 && eeprom_data[2]== 0)
3053 type = BTTV_BOARD_HAUPPAUGE; /* old bt848 */
3057 printk("bttv%d: detected by eeprom: %s [card=%d]\n",
3058 btv->c.nr, bttv_tvcards[btv->c.type].name, btv->c.type);
3062 static void flyvideo_gpio(struct bttv *btv)
3064 int gpio,has_remote,has_radio,is_capture_only,is_lr90,has_tda9820_tda9821;
3067 gpio_inout(0xffffff, 0);
3068 udelay(8); /* without this we would see the 0x1800 mask */
3070 /* FIXME: must restore OUR_EN ??? */
3072 /* all cards provide GPIO info, some have an additional eeprom
3073 * LR50: GPIO coding can be found lower right CP1 .. CP9
3074 * CP9=GPIO23 .. CP1=GPIO15; when OPEN, the corresponding GPIO reads 1.
3076 * LR90: GP9=GPIO23 .. GP1=GPIO15 (right above the bt878)
3078 * lowest 3 bytes are remote control codes (no handshake needed)
3079 * xxxFFF: No remote control chip soldered
3080 * xxxF00(LR26/LR50), xxxFE0(LR90): Remote control chip (LVA001 or CF45) soldered
3081 * Note: Some bits are Audio_Mask !
3083 ttype=(gpio&0x0f0000)>>16;
3085 case 0x0: tuner=2; /* NTSC, e.g. TPI8NSR11P */
3087 case 0x2: tuner=39;/* LG NTSC (newer TAPC series) TAPC-H701P */
3089 case 0x4: tuner=5; /* Philips PAL TPI8PSB02P, TPI8PSB12P, TPI8PSB12D or FI1216, FM1216 */
3091 case 0x6: tuner=37;/* LG PAL (newer TAPC series) TAPC-G702P */
3093 case 0xC: tuner=3; /* Philips SECAM(+PAL) FQ1216ME or FI1216MF */
3096 printk(KERN_INFO "bttv%d: FlyVideo_gpio: unknown tuner type.\n", btv->c.nr);
3099 has_remote = gpio & 0x800000;
3100 has_radio = gpio & 0x400000;
3101 /* unknown 0x200000;
3102 * unknown2 0x100000; */
3103 is_capture_only = !(gpio & 0x008000); /* GPIO15 */
3104 has_tda9820_tda9821 = !(gpio & 0x004000);
3105 is_lr90 = !(gpio & 0x002000); /* else LR26/LR50 (LR38/LR51 f. capture only) */
3107 * gpio & 0x001000 output bit for audio routing */
3110 tuner=4; /* No tuner present */
3112 printk(KERN_INFO "bttv%d: FlyVideo Radio=%s RemoteControl=%s Tuner=%d gpio=0x%06x\n",
3113 btv->c.nr, has_radio? "yes":"no ", has_remote? "yes":"no ", tuner, gpio);
3114 printk(KERN_INFO "bttv%d: FlyVideo LR90=%s tda9821/tda9820=%s capture_only=%s\n",
3115 btv->c.nr, is_lr90?"yes":"no ", has_tda9820_tda9821?"yes":"no ",
3116 is_capture_only?"yes":"no ");
3118 if(tuner!= -1) /* only set if known tuner autodetected, else let insmod option through */
3119 btv->tuner_type = tuner;
3120 btv->has_radio = has_radio;
3122 /* LR90 Audio Routing is done by 2 hef4052, so Audio_Mask has 4 bits: 0x001c80
3123 * LR26/LR50 only has 1 hef4052, Audio_Mask 0x000c00
3124 * Audio options: from tuner, from tda9821/tda9821(mono,stereo,sap), from tda9874, ext., mute */
3125 if(has_tda9820_tda9821) btv->audio_hook = lt9415_audio;
3126 /* todo: if(has_tda9874) btv->audio_hook = fv2000s_audio; */
3129 static int miro_tunermap[] = { 0,6,2,3, 4,5,6,0, 3,0,4,5, 5,2,16,1,
3130 14,2,17,1, 4,1,4,3, 1,2,16,1, 4,4,4,4 };
3131 static int miro_fmtuner[] = { 0,0,0,0, 0,0,0,0, 0,0,0,0, 0,0,0,1,
3132 1,1,1,1, 1,1,1,0, 0,0,0,0, 0,1,0,0 };
3134 static void miro_pinnacle_gpio(struct bttv *btv)
3139 gpio_inout(0xffffff, 0);
3141 id = ((gpio>>10) & 63) -1;
3142 msp = bttv_I2CRead(btv, I2C_ADDR_MSP3400, "MSP34xx");
3144 btv->tuner_type = miro_tunermap[id];
3145 if (0 == (gpio & 0x20)) {
3147 if (!miro_fmtuner[id]) {
3148 btv->has_matchbox = 1;
3149 btv->mbox_we = (1<<6);
3150 btv->mbox_most = (1<<7);
3151 btv->mbox_clk = (1<<8);
3152 btv->mbox_data = (1<<9);
3153 btv->mbox_mask = (1<<6)|(1<<7)|(1<<8)|(1<<9);
3159 if (btv->c.type == BTTV_BOARD_MIRO)
3160 btv->c.type = BTTV_BOARD_MIROPRO;
3161 if (btv->c.type == BTTV_BOARD_PINNACLE)
3162 btv->c.type = BTTV_BOARD_PINNACLEPRO;
3165 "bttv%d: miro: id=%d tuner=%d radio=%s stereo=%s\n",
3166 btv->c.nr, id+1, btv->tuner_type,
3167 !btv->has_radio ? "no" :
3168 (btv->has_matchbox ? "matchbox" : "fmtuner"),
3169 (-1 == msp) ? "no" : "yes");
3171 /* new cards with microtune tuner */
3176 info = "PAL / mono";
3177 btv->tda9887_conf = TDA9887_INTERCARRIER;
3180 info = "PAL+SECAM / stereo";
3182 btv->tda9887_conf = TDA9887_QSS;
3185 info = "NTSC / stereo";
3187 btv->tda9887_conf = TDA9887_QSS;
3190 info = "PAL+SECAM / mono";
3191 btv->tda9887_conf = TDA9887_QSS;
3194 info = "NTSC / mono";
3195 btv->tda9887_conf = TDA9887_INTERCARRIER;
3198 info = "NTSC / stereo";
3199 btv->tda9887_conf = TDA9887_INTERCARRIER;
3202 info = "PAL / stereo";
3203 btv->tda9887_conf = TDA9887_INTERCARRIER;
3206 info = "oops: unknown card";
3210 btv->c.type = BTTV_BOARD_PINNACLEPRO;
3212 "bttv%d: pinnacle/mt: id=%d info=\"%s\" radio=%s\n",
3213 btv->c.nr, id, info, btv->has_radio ? "yes" : "no");
3214 btv->tuner_type = TUNER_MT2032;
3218 /* GPIO21 L: Buffer aktiv, H: Buffer inaktiv */
3219 #define LM1882_SYNC_DRIVE 0x200000L
3221 static void init_ids_eagle(struct bttv *btv)
3223 gpio_inout(0xffffff,0xFFFF37);
3224 gpio_write(0x200020);
3226 /* flash strobe inverter ?! */
3227 gpio_write(0x200024);
3229 /* switch sync drive off */
3230 gpio_bits(LM1882_SYNC_DRIVE,LM1882_SYNC_DRIVE);
3232 /* set BT848 muxel to 2 */
3233 btaor((2)<<5, ~(2<<5), BT848_IFORM);
3236 /* Muxsel helper for the IDS Eagle.
3237 * the eagles does not use the standard muxsel-bits but
3238 * has its own multiplexer */
3239 static void eagle_muxsel(struct bttv *btv, unsigned int input)
3241 btaor((2)<<5, ~(3<<5), BT848_IFORM);
3242 gpio_bits(3,bttv_tvcards[btv->c.type].muxsel[input&7]);
3245 /* set chroma ADC to sleep */
3246 btor(BT848_ADC_C_SLEEP, BT848_ADC);
3247 /* set to composite video */
3248 btand(~BT848_CONTROL_COMP, BT848_E_CONTROL);
3249 btand(~BT848_CONTROL_COMP, BT848_O_CONTROL);
3251 /* switch sync drive off */
3252 gpio_bits(LM1882_SYNC_DRIVE,LM1882_SYNC_DRIVE);
3255 static void gvc1100_muxsel(struct bttv *btv, unsigned int input)
3257 static const int masks[] = {0x30, 0x01, 0x12, 0x23};
3258 gpio_write(masks[input%4]);
3261 /* LMLBT4x initialization - to allow access to GPIO bits for sensors input and
3264 GPIObit | 10 | 9 | 8 | 7 | 6 | 5 | 4 | 3 | 2 | 1 | 0 |
3265 assignment | TI | O3|INx| O2| O1|IN4|IN3|IN2|IN1| | |
3267 IN - sensor inputs, INx - sensor inputs and TI XORed together
3268 O1,O2,O3 - alarm outputs (relays)
3270 OUT ENABLE 1 1 0 . 1 1 0 0 . 0 0 0 0 = 0x6C0
3274 static void init_lmlbt4x(struct bttv *btv)
3276 printk(KERN_DEBUG "LMLBT4x init\n");
3277 btwrite(0x000000, BT848_GPIO_REG_INP);
3278 gpio_inout(0xffffff, 0x0006C0);
3279 gpio_write(0x000000);
3282 static void sigmaSQ_muxsel(struct bttv *btv, unsigned int input)
3284 unsigned int inmux = input % 8;
3285 gpio_inout( 0xf, 0xf );
3286 gpio_bits( 0xf, inmux );
3289 static void sigmaSLC_muxsel(struct bttv *btv, unsigned int input)
3291 unsigned int inmux = input % 4;
3292 gpio_inout( 3<<9, 3<<9 );
3293 gpio_bits( 3<<9, inmux<<9 );
3296 /* ----------------------------------------------------------------------- */
3298 static void bttv_reset_audio(struct bttv *btv)
3301 * BT878A has a audio-reset register.
3302 * 1. This register is an audio reset function but it is in
3303 * function-0 (video capture) address space.
3304 * 2. It is enough to do this once per power-up of the card.
3305 * 3. There is a typo in the Conexant doc -- it is not at
3306 * 0x5B, but at 0x058. (B is an odd-number, obviously a typo!).
3307 * --//Shrikumar 030609
3313 printk("bttv%d: BT878A ARESET\n",btv->c.nr);
3314 btwrite((1<<7), 0x058);
3319 /* initialization part one -- before registering i2c bus */
3320 void __devinit bttv_init_card1(struct bttv *btv)
3322 switch (btv->c.type) {
3323 case BTTV_BOARD_HAUPPAUGE:
3324 case BTTV_BOARD_HAUPPAUGE878:
3325 boot_msp34xx(btv,5);
3327 case BTTV_BOARD_VOODOOTV_200:
3328 case BTTV_BOARD_VOODOOTV_FM:
3329 boot_msp34xx(btv,20);
3331 case BTTV_BOARD_AVERMEDIA98:
3332 boot_msp34xx(btv,11);
3334 case BTTV_BOARD_HAUPPAUGEPVR:
3337 case BTTV_BOARD_TWINHAN_DST:
3338 case BTTV_BOARD_AVDVBT_771:
3339 case BTTV_BOARD_PINNACLESAT:
3340 btv->use_i2c_hw = 1;
3342 case BTTV_BOARD_ADLINK_RTV24:
3347 if (!bttv_tvcards[btv->c.type].has_dvb)
3348 bttv_reset_audio(btv);
3351 /* initialization part two -- after registering i2c bus */
3352 void __devinit bttv_init_card2(struct bttv *btv)
3355 int addr=ADDR_UNSET;
3357 btv->tuner_type = -1;
3359 if (BTTV_BOARD_UNKNOWN == btv->c.type) {
3360 bttv_readee(btv,eeprom_data,0xa0);
3361 identify_by_eeprom(btv,eeprom_data);
3364 switch (btv->c.type) {
3365 case BTTV_BOARD_MIRO:
3366 case BTTV_BOARD_MIROPRO:
3367 case BTTV_BOARD_PINNACLE:
3368 case BTTV_BOARD_PINNACLEPRO:
3370 miro_pinnacle_gpio(btv);
3372 case BTTV_BOARD_FLYVIDEO_98:
3373 case BTTV_BOARD_MAXI:
3374 case BTTV_BOARD_LIFE_FLYKIT:
3375 case BTTV_BOARD_FLYVIDEO:
3376 case BTTV_BOARD_TYPHOON_TVIEW:
3377 case BTTV_BOARD_CHRONOS_VS2:
3378 case BTTV_BOARD_FLYVIDEO_98FM:
3379 case BTTV_BOARD_FLYVIDEO2000:
3380 case BTTV_BOARD_FLYVIDEO98EZ:
3381 case BTTV_BOARD_CONFERENCETV:
3382 case BTTV_BOARD_LIFETEC_9415:
3385 case BTTV_BOARD_HAUPPAUGE:
3386 case BTTV_BOARD_HAUPPAUGE878:
3387 case BTTV_BOARD_HAUPPAUGEPVR:
3388 /* pick up some config infos from the eeprom */
3389 bttv_readee(btv,eeprom_data,0xa0);
3390 hauppauge_eeprom(btv);
3392 case BTTV_BOARD_AVERMEDIA98:
3393 case BTTV_BOARD_AVPHONE98:
3394 bttv_readee(btv,eeprom_data,0xa0);
3395 avermedia_eeprom(btv);
3397 case BTTV_BOARD_PXC200:
3400 case BTTV_BOARD_PICOLO_TETRA_CHIP:
3401 picolo_tetra_init(btv);
3403 case BTTV_BOARD_VHX:
3405 btv->has_matchbox = 1;
3406 btv->mbox_we = 0x20;
3408 btv->mbox_clk = 0x08;
3409 btv->mbox_data = 0x10;
3410 btv->mbox_mask = 0x38;
3412 case BTTV_BOARD_VOBIS_BOOSTAR:
3413 case BTTV_BOARD_TERRATV:
3414 terratec_active_radio_upgrade(btv);
3416 case BTTV_BOARD_MAGICTVIEW061:
3417 if (btv->cardid == 0x3002144f) {
3419 printk("bttv%d: radio detected by subsystem id (CPH05x)\n",btv->c.nr);
3422 case BTTV_BOARD_STB2:
3423 if (btv->cardid == 0x3060121a) {
3424 /* Fix up entry for 3DFX VoodooTV 100,
3425 which is an OEM STB card variant. */
3427 btv->tuner_type=TUNER_TEMIC_NTSC;
3430 case BTTV_BOARD_OSPREY1x0:
3431 case BTTV_BOARD_OSPREY1x0_848:
3432 case BTTV_BOARD_OSPREY101_848:
3433 case BTTV_BOARD_OSPREY1x1:
3434 case BTTV_BOARD_OSPREY1x1_SVID:
3435 case BTTV_BOARD_OSPREY2xx:
3436 case BTTV_BOARD_OSPREY2x0_SVID:
3437 case BTTV_BOARD_OSPREY2x0:
3438 case BTTV_BOARD_OSPREY500:
3439 case BTTV_BOARD_OSPREY540:
3440 case BTTV_BOARD_OSPREY2000:
3441 bttv_readee(btv,eeprom_data,0xa0);
3444 case BTTV_BOARD_IDS_EAGLE:
3445 init_ids_eagle(btv);
3447 case BTTV_BOARD_MODTEC_205:
3448 bttv_readee(btv,eeprom_data,0xa0);
3451 case BTTV_BOARD_LMLBT4:
3454 case BTTV_BOARD_TIBET_CS16:
3455 tibetCS16_init(btv);
3457 case BTTV_BOARD_KODICOM_4400R:
3458 kodicom4400r_init(btv);
3462 /* pll configuration */
3463 if (!(btv->id==848 && btv->revision==0x11)) {
3464 /* defaults from card list */
3465 if (PLL_28 == bttv_tvcards[btv->c.type].pll) {
3466 btv->pll.pll_ifreq=28636363;
3467 btv->pll.pll_crystal=BT848_IFORM_XT0;
3469 if (PLL_35 == bttv_tvcards[btv->c.type].pll) {
3470 btv->pll.pll_ifreq=35468950;
3471 btv->pll.pll_crystal=BT848_IFORM_XT1;
3473 /* insmod options can override */
3474 switch (pll[btv->c.nr]) {
3476 btv->pll.pll_crystal = 0;
3477 btv->pll.pll_ifreq = 0;
3478 btv->pll.pll_ofreq = 0;
3480 case 1: /* 28 MHz */
3482 btv->pll.pll_ifreq = 28636363;
3483 btv->pll.pll_ofreq = 0;
3484 btv->pll.pll_crystal = BT848_IFORM_XT0;
3486 case 2: /* 35 MHz */
3488 btv->pll.pll_ifreq = 35468950;
3489 btv->pll.pll_ofreq = 0;
3490 btv->pll.pll_crystal = BT848_IFORM_XT1;
3494 btv->pll.pll_current = -1;
3496 /* tuner configuration (from card list / autodetect / insmod option) */
3497 if (ADDR_UNSET != bttv_tvcards[btv->c.type].tuner_addr)
3498 addr = bttv_tvcards[btv->c.type].tuner_addr;
3500 if (UNSET != bttv_tvcards[btv->c.type].tuner_type)
3501 if(UNSET == btv->tuner_type)
3502 btv->tuner_type = bttv_tvcards[btv->c.type].tuner_type;
3503 if (UNSET != tuner[btv->c.nr])
3504 btv->tuner_type = tuner[btv->c.nr];
3505 printk("bttv%d: using tuner=%d\n",btv->c.nr,btv->tuner_type);
3507 if (btv->tuner_type != UNSET) {
3508 struct tuner_setup tun_setup;
3510 tun_setup.mode_mask = T_ANALOG_TV | T_DIGITAL_TV;
3511 tun_setup.type = btv->tuner_type;
3512 tun_setup.addr = addr;
3514 bttv_call_i2c_clients(btv, TUNER_SET_TYPE_ADDR, &tun_setup);
3517 if (btv->tda9887_conf) {
3518 bttv_call_i2c_clients(btv, TDA9887_SET_CONFIG,
3519 &btv->tda9887_conf);
3522 btv->svhs = bttv_tvcards[btv->c.type].svhs;
3523 if (svhs[btv->c.nr] != UNSET)
3524 btv->svhs = svhs[btv->c.nr];
3525 if (remote[btv->c.nr] != UNSET)
3526 btv->has_remote = remote[btv->c.nr];
3528 if (bttv_tvcards[btv->c.type].has_radio)
3530 if (bttv_tvcards[btv->c.type].has_remote)
3532 if (!bttv_tvcards[btv->c.type].no_gpioirq)
3534 if (bttv_tvcards[btv->c.type].audio_hook)
3535 btv->audio_hook=bttv_tvcards[btv->c.type].audio_hook;
3537 if (bttv_tvcards[btv->c.type].digital_mode == DIGITAL_MODE_CAMERA) {
3538 /* detect Bt832 chip for quartzsight digital camera */
3539 if ((bttv_I2CRead(btv, I2C_ADDR_BT832_ALT1, "Bt832") >=0) ||
3540 (bttv_I2CRead(btv, I2C_ADDR_BT832_ALT2, "Bt832") >=0))
3547 /* try to detect audio/fader chips */
3548 if (!bttv_tvcards[btv->c.type].no_msp34xx &&
3549 bttv_I2CRead(btv, I2C_ADDR_MSP3400, "MSP34xx") >=0)
3550 request_module("msp3400");
3552 if (bttv_tvcards[btv->c.type].msp34xx_alt &&
3553 bttv_I2CRead(btv, I2C_ADDR_MSP3400_ALT, "MSP34xx (alternate address)") >=0)
3554 request_module("msp3400");
3556 if (!bttv_tvcards[btv->c.type].no_tda9875 &&
3557 bttv_I2CRead(btv, I2C_ADDR_TDA9875, "TDA9875") >=0)
3558 request_module("tda9875");
3560 if (!bttv_tvcards[btv->c.type].no_tda7432 &&
3561 bttv_I2CRead(btv, I2C_ADDR_TDA7432, "TDA7432") >=0)
3562 request_module("tda7432");
3564 if (bttv_tvcards[btv->c.type].needs_tvaudio)
3565 request_module("tvaudio");
3569 if (btv->tda9887_conf)
3571 if (0 == tda9887 && 0 == bttv_tvcards[btv->c.type].has_dvb &&
3572 bttv_I2CRead(btv, I2C_ADDR_TDA9887, "TDA9887") >=0)
3574 /* Hybrid DVB card, DOES have a tda9887 */
3575 if (btv->c.type == BTTV_BOARD_DVICO_FUSIONHDTV_5_LITE)
3577 if (btv->tuner_type != UNSET)
3578 request_module("tuner");
3582 /* ----------------------------------------------------------------------- */
3584 static void modtec_eeprom(struct bttv *btv)
3586 if( strncmp(&(eeprom_data[0x1e]),"Temic 4066 FY5",14) ==0) {
3587 btv->tuner_type=TUNER_TEMIC_4066FY5_PAL_I;
3588 printk("bttv%d: Modtec: Tuner autodetected by eeprom: %s\n",
3589 btv->c.nr,&eeprom_data[0x1e]);
3590 } else if (strncmp(&(eeprom_data[0x1e]),"Alps TSBB5",10) ==0) {
3591 btv->tuner_type=TUNER_ALPS_TSBB5_PAL_I;
3592 printk("bttv%d: Modtec: Tuner autodetected by eeprom: %s\n",
3593 btv->c.nr,&eeprom_data[0x1e]);
3594 } else if (strncmp(&(eeprom_data[0x1e]),"Philips FM1246",14) ==0) {
3595 btv->tuner_type=TUNER_PHILIPS_NTSC;
3596 printk("bttv%d: Modtec: Tuner autodetected by eeprom: %s\n",
3597 btv->c.nr,&eeprom_data[0x1e]);
3599 printk("bttv%d: Modtec: Unknown TunerString: %s\n",
3600 btv->c.nr,&eeprom_data[0x1e]);
3604 static void __devinit hauppauge_eeprom(struct bttv *btv)
3608 tveeprom_hauppauge_analog(&btv->i2c_client, &tv, eeprom_data);
3609 btv->tuner_type = tv.tuner_type;
3610 btv->has_radio = tv.has_radio;
3612 printk("bttv%d: Hauppauge eeprom indicates model#%d\n",
3613 btv->c.nr, tv.model);
3616 * Some of the 878 boards have duplicate PCI IDs. Switch the board
3617 * type based on model #.
3619 if(tv.model == 64900) {
3620 printk("bttv%d: Switching board type from %s to %s\n",
3622 bttv_tvcards[btv->c.type].name,
3623 bttv_tvcards[BTTV_BOARD_HAUPPAUGE_IMPACTVCB].name);
3624 btv->c.type = BTTV_BOARD_HAUPPAUGE_IMPACTVCB;
3628 static int terratec_active_radio_upgrade(struct bttv *btv)
3633 btv->has_matchbox = 1;
3634 btv->mbox_we = 0x10;
3635 btv->mbox_most = 0x20;
3636 btv->mbox_clk = 0x08;
3637 btv->mbox_data = 0x04;
3638 btv->mbox_mask = 0x3c;
3640 btv->mbox_iow = 1 << 8;
3641 btv->mbox_ior = 1 << 9;
3642 btv->mbox_csel = 1 << 10;
3645 tea5757_write(btv, 5 * freq + 0x358); /* write 0x1ed8 */
3646 if (0x1ed8 == tea5757_read(btv)) {
3647 printk("bttv%d: Terratec Active Radio Upgrade found.\n",
3650 btv->has_matchbox = 1;
3653 btv->has_matchbox = 0;
3659 /* ----------------------------------------------------------------------- */
3662 * minimal bootstrap for the WinTV/PVR -- upload altera firmware.
3664 * The hcwamc.rbf firmware file is on the Hauppauge driver CD. Have
3665 * a look at Pvr/pvr45xxx.EXE (self-extracting zip archive, can be
3666 * unpacked with unzip).
3668 #define PVR_GPIO_DELAY 10
3670 #define BTTV_ALT_DATA 0x000001
3671 #define BTTV_ALT_DCLK 0x100000
3672 #define BTTV_ALT_NCONFIG 0x800000
3674 static int __devinit pvr_altera_load(struct bttv *btv, u8 *micro, u32 microlen)
3680 gpio_inout(0xffffff,BTTV_ALT_DATA|BTTV_ALT_DCLK|BTTV_ALT_NCONFIG);
3682 udelay(PVR_GPIO_DELAY);
3684 gpio_write(BTTV_ALT_NCONFIG);
3685 udelay(PVR_GPIO_DELAY);
3687 for (n = 0; n < microlen; n++) {
3689 for (i = 0 ; i < 8 ; i++) {
3690 gpio_bits(BTTV_ALT_DCLK,0);
3692 gpio_bits(BTTV_ALT_DATA,BTTV_ALT_DATA);
3694 gpio_bits(BTTV_ALT_DATA,0);
3695 gpio_bits(BTTV_ALT_DCLK,BTTV_ALT_DCLK);
3699 gpio_bits(BTTV_ALT_DCLK,0);
3700 udelay(PVR_GPIO_DELAY);
3702 /* begin Altera init loop (Not necessary,but doesn't hurt) */
3703 for (i = 0 ; i < 30 ; i++) {
3704 gpio_bits(BTTV_ALT_DCLK,0);
3705 gpio_bits(BTTV_ALT_DCLK,BTTV_ALT_DCLK);
3707 gpio_bits(BTTV_ALT_DCLK,0);
3711 static int __devinit pvr_boot(struct bttv *btv)
3713 const struct firmware *fw_entry;
3716 rc = request_firmware(&fw_entry, "hcwamc.rbf", &btv->c.pci->dev);
3718 printk(KERN_WARNING "bttv%d: no altera firmware [via hotplug]\n",
3722 rc = pvr_altera_load(btv, fw_entry->data, fw_entry->size);
3723 printk(KERN_INFO "bttv%d: altera firmware upload %s\n",
3724 btv->c.nr, (rc < 0) ? "failed" : "ok");
3725 release_firmware(fw_entry);
3729 /* ----------------------------------------------------------------------- */
3730 /* some osprey specific stuff */
3732 static void __devinit osprey_eeprom(struct bttv *btv)
3735 unsigned char *ee = eeprom_data;
3736 unsigned long serial = 0;
3738 if (btv->c.type == 0) {
3739 /* this might be an antique... check for MMAC label in eeprom */
3740 if ((ee[0]=='M') && (ee[1]=='M') && (ee[2]=='A') && (ee[3]=='C')) {
3741 unsigned char checksum = 0;
3742 for (i = 0; i < 21; i++)
3744 if (checksum != ee[21])
3746 btv->c.type = BTTV_BOARD_OSPREY1x0_848;
3747 for (i = 12; i < 21; i++)
3748 serial *= 10, serial += ee[i] - '0';
3751 unsigned short type;
3754 for (; offset < 8*16; offset += 16) {
3755 unsigned short checksum = 0;
3756 /* verify the checksum */
3757 for (i = 0; i < 14; i++)
3758 checksum += ee[i+offset];
3759 checksum = ~checksum; /* no idea why */
3760 if ((((checksum>>8)&0x0FF) == ee[offset+14]) &&
3761 ((checksum & 0x0FF) == ee[offset+15])) {
3769 /* found a valid descriptor */
3770 type = (ee[offset+4]<<8) | (ee[offset+5]);
3775 btv->c.type = BTTV_BOARD_OSPREY1x0_848;
3778 btv->c.type = BTTV_BOARD_OSPREY101_848;
3784 btv->c.type = BTTV_BOARD_OSPREY1x0;
3788 btv->c.type = BTTV_BOARD_OSPREY1x1;
3793 btv->c.type = BTTV_BOARD_OSPREY1x1_SVID;
3799 btv->c.type = BTTV_BOARD_OSPREY2xx;
3803 btv->c.type = BTTV_BOARD_OSPREY2x0_SVID;
3806 btv->c.type = BTTV_BOARD_OSPREY500;
3810 btv->c.type = BTTV_BOARD_OSPREY540;
3811 /* bttv_osprey_540_init(btv); */
3816 btv->c.type = BTTV_BOARD_OSPREY2x0;
3817 /* enable output on select control lines */
3818 gpio_inout(0xffffff,0x000303);
3821 /* unknown...leave generic, but get serial # */
3824 serial = (ee[offset+6] << 24)
3825 | (ee[offset+7] << 16)
3826 | (ee[offset+8] << 8)
3830 printk(KERN_INFO "bttv%d: osprey eeprom: card=%d name=%s serial=%ld\n",
3831 btv->c.nr, btv->c.type, bttv_tvcards[btv->c.type].name,serial);
3834 /* ----------------------------------------------------------------------- */
3835 /* AVermedia specific stuff, from bktr_card.c */
3837 static int tuner_0_table[] = {
3838 TUNER_PHILIPS_NTSC, TUNER_PHILIPS_PAL /* PAL-BG*/,
3839 TUNER_PHILIPS_PAL, TUNER_PHILIPS_PAL /* PAL-I*/,
3840 TUNER_PHILIPS_PAL, TUNER_PHILIPS_PAL,
3841 TUNER_PHILIPS_SECAM, TUNER_PHILIPS_SECAM,
3842 TUNER_PHILIPS_SECAM, TUNER_PHILIPS_PAL,
3843 TUNER_PHILIPS_FM1216ME_MK3 };
3845 static int tuner_1_table[] = {
3846 TUNER_TEMIC_NTSC, TUNER_TEMIC_PAL,
3847 TUNER_TEMIC_PAL, TUNER_TEMIC_PAL,
3848 TUNER_TEMIC_PAL, TUNER_TEMIC_PAL,
3849 TUNER_TEMIC_4012FY5, TUNER_TEMIC_4012FY5, /* TUNER_TEMIC_SECAM */
3850 TUNER_TEMIC_4012FY5, TUNER_TEMIC_PAL};
3852 static void __devinit avermedia_eeprom(struct bttv *btv)
3854 int tuner_make,tuner_tv_fm,tuner_format,tuner=0;
3856 tuner_make = (eeprom_data[0x41] & 0x7);
3857 tuner_tv_fm = (eeprom_data[0x41] & 0x18) >> 3;
3858 tuner_format = (eeprom_data[0x42] & 0xf0) >> 4;
3859 btv->has_remote = (eeprom_data[0x42] & 0x01);
3861 if (tuner_make == 0 || tuner_make == 2)
3862 if(tuner_format <=0x0a)
3863 tuner = tuner_0_table[tuner_format];
3864 if (tuner_make == 1)
3865 if(tuner_format <=9)
3866 tuner = tuner_1_table[tuner_format];
3868 if (tuner_make == 4)
3869 if(tuner_format == 0x09)
3870 tuner = TUNER_LG_NTSC_NEW_TAPC; /* TAPC-G702P */
3872 printk(KERN_INFO "bttv%d: Avermedia eeprom[0x%02x%02x]: tuner=",
3873 btv->c.nr,eeprom_data[0x41],eeprom_data[0x42]);
3875 btv->tuner_type=tuner;
3878 printk("Unknown type");
3879 printk(" radio:%s remote control:%s\n",
3880 tuner_tv_fm ? "yes" : "no",
3881 btv->has_remote ? "yes" : "no");
3884 /* used on Voodoo TV/FM (Voodoo 200), S0 wired to 0x10000 */
3885 void bttv_tda9880_setnorm(struct bttv *btv, int norm)
3887 /* fix up our card entry */
3888 if(norm==VIDEO_MODE_NTSC) {
3889 bttv_tvcards[BTTV_BOARD_VOODOOTV_FM].gpiomux[TVAUDIO_INPUT_TUNER]=0x957fff;
3890 bttv_tvcards[BTTV_BOARD_VOODOOTV_FM].gpiomute=0x957fff;
3891 bttv_tvcards[BTTV_BOARD_VOODOOTV_200].gpiomux[TVAUDIO_INPUT_TUNER]=0x957fff;
3892 bttv_tvcards[BTTV_BOARD_VOODOOTV_200].gpiomute=0x957fff;
3893 dprintk("bttv_tda9880_setnorm to NTSC\n");
3896 bttv_tvcards[BTTV_BOARD_VOODOOTV_FM].gpiomux[TVAUDIO_INPUT_TUNER]=0x947fff;
3897 bttv_tvcards[BTTV_BOARD_VOODOOTV_FM].gpiomute=0x947fff;
3898 bttv_tvcards[BTTV_BOARD_VOODOOTV_200].gpiomux[TVAUDIO_INPUT_TUNER]=0x947fff;
3899 bttv_tvcards[BTTV_BOARD_VOODOOTV_200].gpiomute=0x947fff;
3900 dprintk("bttv_tda9880_setnorm to PAL\n");
3902 /* set GPIO according */
3903 gpio_bits(bttv_tvcards[btv->c.type].gpiomask,
3904 bttv_tvcards[btv->c.type].gpiomux[btv->audio]);
3909 * reset/enable the MSP on some Hauppauge cards
3910 * Thanks to Kyösti Mälkki (kmalkki@cc.hut.fi)!
3915 static void __devinit boot_msp34xx(struct bttv *btv, int pin)
3917 int mask = (1 << pin);
3919 gpio_inout(mask,mask);
3922 gpio_bits(mask,mask);
3925 bttv_gpio_tracking(btv,"msp34xx");
3927 printk(KERN_INFO "bttv%d: Hauppauge/Voodoo msp34xx: reset line "
3928 "init [%d]\n", btv->c.nr, pin);
3931 static void __devinit boot_bt832(struct bttv *btv)
3935 /* ----------------------------------------------------------------------- */
3936 /* Imagenation L-Model PXC200 Framegrabber */
3937 /* This is basically the same procedure as
3938 * used by Alessandro Rubini in his pxc200
3939 * driver, but using BTTV functions */
3941 static void __devinit init_PXC200(struct bttv *btv)
3943 static int vals[] __devinitdata = { 0x08, 0x09, 0x0a, 0x0b, 0x0d, 0x0d,
3944 0x01, 0x02, 0x03, 0x04, 0x05, 0x06,
3950 /* Initialise GPIO-connevted stuff */
3951 gpio_inout(0xffffff, (1<<13));
3955 /* GPIO inputs are pulled up, so no need to drive
3956 * reset pin any longer */
3957 gpio_bits(0xffffff, 0);
3959 bttv_gpio_tracking(btv,"pxc200");
3961 /* we could/should try and reset/control the AD pots? but
3962 right now we simply turned off the crushing. Without
3963 this the AGC drifts drifts
3964 remember the EN is reverse logic -->
3965 setting BT848_ADC_AGC_EN disable the AGC
3966 tboult@eecs.lehigh.edu
3969 btwrite(BT848_ADC_RESERVED|BT848_ADC_AGC_EN, BT848_ADC);
3971 /* Initialise MAX517 DAC */
3972 printk(KERN_INFO "Setting DAC reference voltage level ...\n");
3973 bttv_I2CWrite(btv,0x5E,0,0x80,1);
3975 /* Initialise 12C508 PIC */
3976 /* The I2CWrite and I2CRead commmands are actually to the
3977 * same chips - but the R/W bit is included in the address
3978 * argument so the numbers are different */
3981 printk(KERN_INFO "Initialising 12C508 PIC chip ...\n");
3983 /* First of all, enable the clock line. This is used in the PXC200-F */
3984 val = btread(BT848_GPIO_DMA_CTL);
3985 val |= BT848_GPIO_DMA_CTL_GPCLKMODE;
3986 btwrite(val, BT848_GPIO_DMA_CTL);
3988 /* Then, push to 0 the reset pin long enough to reset the *
3989 * device same as above for the reset line, but not the same
3990 * value sent to the GPIO-connected stuff
3991 * which one is the good one? */
3992 gpio_inout(0xffffff,(1<<2));
3997 for (i = 0; i < ARRAY_SIZE(vals); i++) {
3998 tmp=bttv_I2CWrite(btv,0x1E,0,vals[i],1);
4001 "I2C Write(%2.2x) = %i\nI2C Read () = %2.2x\n\n",
4002 vals[i],tmp,bttv_I2CRead(btv,0x1F,NULL));
4006 printk(KERN_INFO "PXC200 Initialised.\n");
4011 /* ----------------------------------------------------------------------- */
4013 * The Adlink RTV-24 (aka Angelo) has some special initialisation to unlock
4014 * it. This apparently involves the following procedure for each 878 chip:
4016 * 1) write 0x00C3FEFF to the GPIO_OUT_EN register
4018 * 2) write to GPIO_DATA
4024 * read from GPIO_DATA into buf (uint_32)
4025 * - if ( data>>18 & 0x01 != 0) || ( buf>>19 & 0x01 != 1 )
4026 * error. ERROR_CPLD_Check_Failed stop.
4028 * 3) write to GPIO_DATA
4029 * - write 0x4400 + 0x0E
4031 * - write 0x4410 + 0x0E
4034 * read from GPIO_DATA into buf (uint_32)
4035 * - if ( buf>>18 & 0x01 ) || ( buf>>19 & 0x01 != 0 )
4036 * error. ERROR_CPLD_Check_Failed.
4038 /* ----------------------------------------------------------------------- */
4040 init_RTV24 (struct bttv *btv)
4042 uint32_t dataRead = 0;
4043 long watchdog_value = 0x0E;
4046 "bttv%d: Adlink RTV-24 initialisation in progress ...\n",
4049 btwrite (0x00c3feff, BT848_GPIO_OUT_EN);
4051 btwrite (0 + watchdog_value, BT848_GPIO_DATA);
4053 btwrite (0x10 + watchdog_value, BT848_GPIO_DATA);
4055 btwrite (0 + watchdog_value, BT848_GPIO_DATA);
4057 dataRead = btread (BT848_GPIO_DATA);
4059 if ((((dataRead >> 18) & 0x01) != 0) || (((dataRead >> 19) & 0x01) != 1)) {
4061 "bttv%d: Adlink RTV-24 initialisation(1) ERROR_CPLD_Check_Failed (read %d)\n",
4062 btv->c.nr, dataRead);
4065 btwrite (0x4400 + watchdog_value, BT848_GPIO_DATA);
4067 btwrite (0x4410 + watchdog_value, BT848_GPIO_DATA);
4069 btwrite (watchdog_value, BT848_GPIO_DATA);
4071 dataRead = btread (BT848_GPIO_DATA);
4073 if ((((dataRead >> 18) & 0x01) != 0) || (((dataRead >> 19) & 0x01) != 0)) {
4075 "bttv%d: Adlink RTV-24 initialisation(2) ERROR_CPLD_Check_Failed (read %d)\n",
4076 btv->c.nr, dataRead);
4082 "bttv%d: Adlink RTV-24 initialisation complete.\n", btv->c.nr);
4087 /* ----------------------------------------------------------------------- */
4088 /* Miro Pro radio stuff -- the tea5757 is connected to some GPIO ports */
4090 * Copyright (c) 1999 Csaba Halasz <qgehali@uni-miskolc.hu>
4091 * This code is placed under the terms of the GNU General Public License
4093 * Brutally hacked by Dan Sheridan <dan.sheridan@contact.org.uk> djs52 8/3/00
4096 static void bus_low(struct bttv *btv, int bit)
4098 if (btv->mbox_ior) {
4099 gpio_bits(btv->mbox_ior | btv->mbox_iow | btv->mbox_csel,
4100 btv->mbox_ior | btv->mbox_iow | btv->mbox_csel);
4107 if (btv->mbox_ior) {
4108 gpio_bits(btv->mbox_iow | btv->mbox_csel, 0);
4113 static void bus_high(struct bttv *btv, int bit)
4115 if (btv->mbox_ior) {
4116 gpio_bits(btv->mbox_ior | btv->mbox_iow | btv->mbox_csel,
4117 btv->mbox_ior | btv->mbox_iow | btv->mbox_csel);
4124 if (btv->mbox_ior) {
4125 gpio_bits(btv->mbox_iow | btv->mbox_csel, 0);
4130 static int bus_in(struct bttv *btv, int bit)
4132 if (btv->mbox_ior) {
4133 gpio_bits(btv->mbox_ior | btv->mbox_iow | btv->mbox_csel,
4134 btv->mbox_ior | btv->mbox_iow | btv->mbox_csel);
4137 gpio_bits(btv->mbox_iow | btv->mbox_csel, 0);
4140 return gpio_read() & (bit);
4143 /* TEA5757 register bits */
4144 #define TEA_FREQ 0:14
4145 #define TEA_BUFFER 15:15
4147 #define TEA_SIGNAL_STRENGTH 16:17
4149 #define TEA_PORT1 18:18
4150 #define TEA_PORT0 19:19
4152 #define TEA_BAND 20:21
4153 #define TEA_BAND_FM 0
4154 #define TEA_BAND_MW 1
4155 #define TEA_BAND_LW 2
4156 #define TEA_BAND_SW 3
4158 #define TEA_MONO 22:22
4159 #define TEA_ALLOW_STEREO 0
4160 #define TEA_FORCE_MONO 1
4162 #define TEA_SEARCH_DIRECTION 23:23
4163 #define TEA_SEARCH_DOWN 0
4164 #define TEA_SEARCH_UP 1
4166 #define TEA_STATUS 24:24
4167 #define TEA_STATUS_TUNED 0
4168 #define TEA_STATUS_SEARCHING 1
4170 /* Low-level stuff */
4171 static int tea5757_read(struct bttv *btv)
4173 unsigned long timeout;
4177 /* better safe than sorry */
4178 gpio_inout(btv->mbox_mask, btv->mbox_clk | btv->mbox_we);
4180 if (btv->mbox_ior) {
4181 gpio_bits(btv->mbox_ior | btv->mbox_iow | btv->mbox_csel,
4182 btv->mbox_ior | btv->mbox_iow | btv->mbox_csel);
4187 bttv_gpio_tracking(btv,"tea5757 read");
4189 bus_low(btv,btv->mbox_we);
4190 bus_low(btv,btv->mbox_clk);
4193 timeout= jiffies + HZ;
4195 /* wait for DATA line to go low; error if it doesn't */
4196 while (bus_in(btv,btv->mbox_data) && time_before(jiffies, timeout))
4198 if (bus_in(btv,btv->mbox_data)) {
4199 printk(KERN_WARNING "bttv%d: tea5757: read timeout\n",btv->c.nr);
4203 dprintk("bttv%d: tea5757:",btv->c.nr);
4204 for (i = 0; i < 24; i++) {
4206 bus_high(btv,btv->mbox_clk);
4208 dprintk("%c",(bus_in(btv,btv->mbox_most) == 0)?'T':'-');
4209 bus_low(btv,btv->mbox_clk);
4211 value |= (bus_in(btv,btv->mbox_data) == 0)?0:1; /* MSB first */
4212 dprintk("%c", (bus_in(btv,btv->mbox_most) == 0)?'S':'M');
4214 dprintk("\nbttv%d: tea5757: read 0x%X\n", btv->c.nr, value);
4218 static int tea5757_write(struct bttv *btv, int value)
4223 gpio_inout(btv->mbox_mask, btv->mbox_clk | btv->mbox_we | btv->mbox_data);
4225 if (btv->mbox_ior) {
4226 gpio_bits(btv->mbox_ior | btv->mbox_iow | btv->mbox_csel,
4227 btv->mbox_ior | btv->mbox_iow | btv->mbox_csel);
4231 bttv_gpio_tracking(btv,"tea5757 write");
4233 dprintk("bttv%d: tea5757: write 0x%X\n", btv->c.nr, value);
4234 bus_low(btv,btv->mbox_clk);
4235 bus_high(btv,btv->mbox_we);
4236 for (i = 0; i < 25; i++) {
4237 if (reg & 0x1000000)
4238 bus_high(btv,btv->mbox_data);
4240 bus_low(btv,btv->mbox_data);
4242 bus_high(btv,btv->mbox_clk);
4244 bus_low(btv,btv->mbox_clk);
4247 bus_low(btv,btv->mbox_we); /* unmute !!! */
4251 void tea5757_set_freq(struct bttv *btv, unsigned short freq)
4253 dprintk("tea5757_set_freq %d\n",freq);
4254 tea5757_write(btv, 5 * freq + 0x358); /* add 10.7MHz (see docs) */
4258 /* ----------------------------------------------------------------------- */
4261 static void winview_audio(struct bttv *btv, struct video_audio *v, int set)
4263 /* PT2254A programming Jon Tombs, jon@gte.esi.us.es */
4264 int bits_out, loops, vol, data;
4267 /* Fixed by Leandro Lucarella <luca@linuxmendoza.org.ar (07/31/01) */
4268 v->flags |= VIDEO_AUDIO_VOLUME;
4272 /* 32 levels logarithmic */
4273 vol = 32 - ((v->volume>>11));
4275 bits_out = (PT2254_DBS_IN_2>>(vol%5));
4277 bits_out |= (PT2254_DBS_IN_10>>(vol/5));
4278 bits_out |= PT2254_L_CHANNEL | PT2254_R_CHANNEL;
4280 data &= ~(WINVIEW_PT2254_CLK| WINVIEW_PT2254_DATA|
4281 WINVIEW_PT2254_STROBE);
4282 for (loops = 17; loops >= 0 ; loops--) {
4283 if (bits_out & (1<<loops))
4284 data |= WINVIEW_PT2254_DATA;
4286 data &= ~WINVIEW_PT2254_DATA;
4289 data |= WINVIEW_PT2254_CLK;
4292 data &= ~WINVIEW_PT2254_CLK;
4295 data |= WINVIEW_PT2254_STROBE;
4296 data &= ~WINVIEW_PT2254_DATA;
4299 data &= ~WINVIEW_PT2254_STROBE;
4303 /* ----------------------------------------------------------------------- */
4304 /* mono/stereo control for various cards (which don't use i2c chips but */
4305 /* connect something to the GPIO pins */
4308 gvbctv3pci_audio(struct bttv *btv, struct video_audio *v, int set)
4310 unsigned int con = 0;
4313 gpio_inout(0x300, 0x300);
4314 if (v->mode & VIDEO_SOUND_LANG1)
4316 if (v->mode & VIDEO_SOUND_LANG2)
4318 if (v->mode & VIDEO_SOUND_STEREO)
4320 /* if (v->mode & VIDEO_SOUND_MONO)
4322 gpio_bits(0x300, con);
4324 v->mode = VIDEO_SOUND_STEREO |
4325 VIDEO_SOUND_LANG1 | VIDEO_SOUND_LANG2;
4330 gvbctv5pci_audio(struct bttv *btv, struct video_audio *v, int set)
4332 unsigned int val, con;
4334 if (btv->radio_user)
4340 if (v->mode & VIDEO_SOUND_LANG2) {
4341 if (v->mode & VIDEO_SOUND_LANG1) {
4350 if (con != (val & 0x300)) {
4351 gpio_bits(0x300, con);
4353 bttv_gpio_tracking(btv,"gvbctv5pci");
4356 switch (val & 0x70) {
4358 v->mode = VIDEO_SOUND_LANG1 | VIDEO_SOUND_LANG2;
4361 v->mode = VIDEO_SOUND_LANG2;
4364 v->mode = VIDEO_SOUND_LANG1;
4367 v->mode = VIDEO_SOUND_STEREO;
4370 v->mode = VIDEO_SOUND_MONO;
4373 v->mode = VIDEO_SOUND_MONO | VIDEO_SOUND_STEREO |
4374 VIDEO_SOUND_LANG1 | VIDEO_SOUND_LANG2;
4380 * Mario Medina Nussbaum <medisoft@alohabbs.org.mx>
4381 * I discover that on BT848_GPIO_DATA address a byte 0xcce enable stereo,
4382 * 0xdde enables mono and 0xccd enables sap
4384 * Petr Vandrovec <VANDROVE@vc.cvut.cz>
4385 * P.S.: At least mask in line above is wrong - GPIO pins 3,2 select
4386 * input/output sound connection, so both must be set for output mode.
4388 * Looks like it's needed only for the "tvphone", the "tvphone 98"
4389 * handles this with a tda9840
4393 avermedia_tvphone_audio(struct bttv *btv, struct video_audio *v, int set)
4398 if (v->mode & VIDEO_SOUND_LANG2) /* SAP */
4400 if (v->mode & VIDEO_SOUND_STEREO)
4403 gpio_bits(0x03,val);
4405 bttv_gpio_tracking(btv,"avermedia");
4408 v->mode = VIDEO_SOUND_MONO | VIDEO_SOUND_STEREO |
4415 avermedia_tv_stereo_audio(struct bttv *btv, struct video_audio *v, int set)
4420 if (v->mode & VIDEO_SOUND_LANG2) /* SAP */
4422 if (v->mode & VIDEO_SOUND_STEREO) /* STEREO */
4424 btaor(val, ~0x03, BT848_GPIO_DATA);
4426 bttv_gpio_tracking(btv,"avermedia");
4428 v->mode = VIDEO_SOUND_MONO | VIDEO_SOUND_STEREO |
4429 VIDEO_SOUND_LANG1 | VIDEO_SOUND_LANG2;
4434 /* Lifetec 9415 handling */
4436 lt9415_audio(struct bttv *btv, struct video_audio *v, int set)
4440 if (gpio_read() & 0x4000) {
4441 v->mode = VIDEO_SOUND_MONO;
4446 if (v->mode & VIDEO_SOUND_LANG2) /* A2 SAP */
4448 if (v->mode & VIDEO_SOUND_STEREO) /* A2 stereo */
4450 if ((v->mode & VIDEO_SOUND_LANG1) ||
4451 (v->mode & VIDEO_SOUND_MONO))
4453 gpio_bits(0x0880, val);
4455 bttv_gpio_tracking(btv,"lt9415");
4457 /* autodetect doesn't work with this card :-( */
4458 v->mode = VIDEO_SOUND_MONO | VIDEO_SOUND_STEREO |
4459 VIDEO_SOUND_LANG1 | VIDEO_SOUND_LANG2;
4464 /* TDA9821 on TerraTV+ Bt848, Bt878 */
4466 terratv_audio(struct bttv *btv, struct video_audio *v, int set)
4468 unsigned int con = 0;
4471 gpio_inout(0x180000,0x180000);
4472 if (v->mode & VIDEO_SOUND_LANG2)
4474 if (v->mode & VIDEO_SOUND_STEREO)
4476 gpio_bits(0x180000, con);
4478 bttv_gpio_tracking(btv,"terratv");
4480 v->mode = VIDEO_SOUND_MONO | VIDEO_SOUND_STEREO |
4481 VIDEO_SOUND_LANG1 | VIDEO_SOUND_LANG2;
4486 winfast2000_audio(struct bttv *btv, struct video_audio *v, int set)
4488 unsigned long val = 0;
4491 /*btor (0xc32000, BT848_GPIO_OUT_EN);*/
4492 if (v->mode & VIDEO_SOUND_MONO) /* Mono */
4494 if (v->mode & VIDEO_SOUND_LANG1) /* Mono */
4496 if (v->mode & VIDEO_SOUND_LANG2) /* SAP */
4498 if (v->mode & VIDEO_SOUND_STEREO) /* Stereo */
4501 gpio_bits(0x430000, val);
4503 bttv_gpio_tracking(btv,"winfast2000");
4506 v->mode = VIDEO_SOUND_MONO | VIDEO_SOUND_STEREO |
4507 VIDEO_SOUND_LANG1 | VIDEO_SOUND_LANG2;
4512 * Dariusz Kowalewski <darekk@automex.pl>
4513 * sound control for Prolink PV-BT878P+9B (PixelView PlayTV Pro FM+NICAM
4514 * revision 9B has on-board TDA9874A sound decoder).
4516 * Note: There are card variants without tda9874a. Forcing the "stereo sound route"
4517 * will mute this cards.
4520 pvbt878p9b_audio(struct bttv *btv, struct video_audio *v, int set)
4522 unsigned int val = 0;
4524 if (btv->radio_user)
4528 if (v->mode & VIDEO_SOUND_MONO) {
4531 if ((v->mode & (VIDEO_SOUND_LANG1 | VIDEO_SOUND_LANG2))
4532 || (v->mode & VIDEO_SOUND_STEREO)) {
4536 gpio_bits(0x03,val);
4538 bttv_gpio_tracking(btv,"pvbt878p9b");
4541 v->mode = VIDEO_SOUND_MONO | VIDEO_SOUND_STEREO |
4542 VIDEO_SOUND_LANG1 | VIDEO_SOUND_LANG2;
4547 * Dariusz Kowalewski <darekk@automex.pl>
4548 * sound control for FlyVideo 2000S (with tda9874 decoder)
4549 * based on pvbt878p9b_audio() - this is not tested, please fix!!!
4552 fv2000s_audio(struct bttv *btv, struct video_audio *v, int set)
4554 unsigned int val = 0xffff;
4556 if (btv->radio_user)
4559 if (v->mode & VIDEO_SOUND_MONO) {
4562 if ((v->mode & (VIDEO_SOUND_LANG1 | VIDEO_SOUND_LANG2))
4563 || (v->mode & VIDEO_SOUND_STEREO)) {
4564 val = 0x1080; /*-dk-???: 0x0880, 0x0080, 0x1800 ... */
4566 if (val != 0xffff) {
4567 gpio_bits(0x1800, val);
4569 bttv_gpio_tracking(btv,"fv2000s");
4572 v->mode = VIDEO_SOUND_MONO | VIDEO_SOUND_STEREO |
4573 VIDEO_SOUND_LANG1 | VIDEO_SOUND_LANG2;
4578 * sound control for Canopus WinDVR PCI
4579 * Masaki Suzuki <masaki@btree.org>
4582 windvr_audio(struct bttv *btv, struct video_audio *v, int set)
4584 unsigned long val = 0;
4587 if (v->mode & VIDEO_SOUND_MONO)
4589 if (v->mode & VIDEO_SOUND_LANG1)
4591 if (v->mode & VIDEO_SOUND_LANG2)
4593 if (v->mode & VIDEO_SOUND_STEREO)
4596 gpio_bits(0x140000, val);
4598 bttv_gpio_tracking(btv,"windvr");
4601 v->mode = VIDEO_SOUND_MONO | VIDEO_SOUND_STEREO |
4602 VIDEO_SOUND_LANG1 | VIDEO_SOUND_LANG2;
4607 * sound control for AD-TVK503
4608 * Hiroshi Takekawa <sian@big.or.jp>
4611 adtvk503_audio(struct bttv *btv, struct video_audio *v, int set)
4613 unsigned int con = 0xffffff;
4615 /* btaor(0x1e0000, ~0x1e0000, BT848_GPIO_OUT_EN); */
4618 /* btor(***, BT848_GPIO_OUT_EN); */
4619 if (v->mode & VIDEO_SOUND_LANG1)
4621 if (v->mode & VIDEO_SOUND_LANG2)
4623 if (v->mode & VIDEO_SOUND_STEREO)
4625 if (v->mode & VIDEO_SOUND_MONO)
4627 if (con != 0xffffff) {
4628 gpio_bits(0x1e0000,con);
4630 bttv_gpio_tracking(btv, "adtvk503");
4633 v->mode = VIDEO_SOUND_MONO | VIDEO_SOUND_STEREO |
4634 VIDEO_SOUND_LANG1 | VIDEO_SOUND_LANG2;
4638 /* RemoteVision MX (rv605) muxsel helper [Miguel Freitas]
4640 * This is needed because rv605 don't use a normal multiplex, but a crosspoint
4641 * switch instead (CD22M3494E). This IC can have multiple active connections
4642 * between Xn (input) and Yn (output) pins. We need to clear any existing
4643 * connection prior to establish a new one, pulsing the STROBE pin.
4645 * The board hardwire Y0 (xpoint) to MUX1 and MUXOUT to Yin.
4646 * GPIO pins are wired as:
4647 * GPIO[0:3] - AX[0:3] (xpoint) - P1[0:3] (microcontroler)
4648 * GPIO[4:6] - AY[0:2] (xpoint) - P1[4:6] (microcontroler)
4649 * GPIO[7] - DATA (xpoint) - P1[7] (microcontroler)
4650 * GPIO[8] - - P3[5] (microcontroler)
4651 * GPIO[9] - RESET (xpoint) - P3[6] (microcontroler)
4652 * GPIO[10] - STROBE (xpoint) - P3[7] (microcontroler)
4653 * GPINTR - - P3[4] (microcontroler)
4655 * The microcontroler is a 80C32 like. It should be possible to change xpoint
4656 * configuration either directly (as we are doing) or using the microcontroler
4657 * which is also wired to I2C interface. I have no further info on the
4658 * microcontroler features, one would need to disassembly the firmware.
4659 * note: the vendor refused to give any information on this product, all
4660 * that stuff was found using a multimeter! :)
4662 static void rv605_muxsel(struct bttv *btv, unsigned int input)
4664 /* reset all conections */
4665 gpio_bits(0x200,0x200);
4667 gpio_bits(0x200,0x000);
4670 /* create a new conection */
4671 gpio_bits(0x480,0x080);
4672 gpio_bits(0x480,0x480);
4674 gpio_bits(0x480,0x080);
4678 /* Tibet Systems 'Progress DVR' CS16 muxsel helper [Chris Fanning]
4680 * The CS16 (available on eBay cheap) is a PCI board with four Fusion
4681 * 878A chips, a PCI bridge, an Atmel microcontroller, four sync seperator
4682 * chips, ten eight input analog multiplexors, a not chip and a few
4685 * 16 inputs on a secondary bracket are provided and can be selected
4686 * from each of the four capture chips. Two of the eight input
4687 * multiplexors are used to select from any of the 16 input signals.
4689 * Unsupported hardware capabilities:
4690 * . A video output monitor on the secondary bracket can be selected from
4691 * one of the 878A chips.
4692 * . Another passthrough but I haven't spent any time investigating it.
4693 * . Digital I/O (logic level connected to GPIO) is available from an
4696 * The on chip input mux should always be set to 2.
4697 * GPIO[16:19] - Video input selection
4698 * GPIO[0:3] - Video output monitor select (only available from one 878A)
4699 * GPIO[?:?] - Digital I/O.
4701 * There is an ATMEL microcontroller with an 8031 core on board. I have not
4702 * determined what function (if any) it provides. With the microcontroller
4703 * and sync seperator chips a guess is that it might have to do with video
4704 * switching and maybe some digital I/O.
4706 static void tibetCS16_muxsel(struct bttv *btv, unsigned int input)
4709 gpio_bits(0x0f0000, input << 16);
4712 static void tibetCS16_init(struct bttv *btv)
4714 /* enable gpio bits, mask obtained via btSpy */
4715 gpio_inout(0xffffff, 0x0f7fff);
4716 gpio_write(0x0f7fff);
4720 * The following routines for the Kodicom-4400r get a little mind-twisting.
4721 * There is a "master" controller and three "slave" controllers, together
4722 * an analog switch which connects any of 16 cameras to any of the BT87A's.
4723 * The analog switch is controlled by the "master", but the detection order
4724 * of the four BT878A chips is in an order which I just don't understand.
4725 * The "master" is actually the second controller to be detected. The
4726 * logic on the board uses logical numbers for the 4 controlers, but
4727 * those numbers are different from the detection sequence. When working
4728 * with the analog switch, we need to "map" from the detection sequence
4729 * over to the board's logical controller number. This mapping sequence
4730 * is {3, 0, 2, 1}, i.e. the first controller to be detected is logical
4731 * unit 3, the second (which is the master) is logical unit 0, etc.
4732 * We need to maintain the status of the analog switch (which of the 16
4733 * cameras is connected to which of the 4 controllers). Rather than
4734 * add to the bttv structure for this, we use the data reserved for
4735 * the mbox (unused for this card type).
4739 * First a routine to set the analog switch, which controls which camera
4740 * is routed to which controller. The switch comprises an X-address
4741 * (gpio bits 0-3, representing the camera, ranging from 0-15), and a
4742 * Y-address (gpio bits 4-6, representing the controller, ranging from 0-3).
4743 * A data value (gpio bit 7) of '1' enables the switch, and '0' disables
4744 * the switch. A STROBE bit (gpio bit 8) latches the data value into the
4745 * specified address. The idea is to set the address and data, then bring
4746 * STROBE high, and finally bring STROBE back to low.
4748 static void kodicom4400r_write(struct bttv *btv,
4749 unsigned char xaddr,
4750 unsigned char yaddr,
4751 unsigned char data) {
4754 udata = (data << 7) | ((yaddr&3) << 4) | (xaddr&0xf);
4755 gpio_bits(0x1ff, udata); /* write ADDR and DAT */
4756 gpio_bits(0x1ff, udata | (1 << 8)); /* strobe high */
4757 gpio_bits(0x1ff, udata); /* strobe low */
4761 * Next the mux select. Both the "master" and "slave" 'cards' (controllers)
4762 * use this routine. The routine finds the "master" for the card, maps
4763 * the controller number from the detected position over to the logical
4764 * number, writes the appropriate data to the analog switch, and housekeeps
4765 * the local copy of the switch information. The parameter 'input' is the
4766 * requested camera number (0 - 15).
4768 static void kodicom4400r_muxsel(struct bttv *btv, unsigned int input)
4773 static unsigned char map[4] = {3, 0, 2, 1};
4775 mctlr = master[btv->c.nr];
4776 if (mctlr == NULL) { /* ignore if master not yet detected */
4779 yaddr = (btv->c.nr - mctlr->c.nr + 1) & 3; /* the '&' is for safety */
4781 sw_status = (char *)(&mctlr->mbox_we);
4782 xaddr = input & 0xf;
4783 /* Check if the controller/camera pair has changed, else ignore */
4784 if (sw_status[yaddr] != xaddr)
4786 /* "open" the old switch, "close" the new one, save the new */
4787 kodicom4400r_write(mctlr, sw_status[yaddr], yaddr, 0);
4788 sw_status[yaddr] = xaddr;
4789 kodicom4400r_write(mctlr, xaddr, yaddr, 1);
4794 * During initialisation, we need to reset the analog switch. We
4795 * also preset the switch to map the 4 connectors on the card to the
4796 * *user's* (see above description of kodicom4400r_muxsel) channels
4799 static void kodicom4400r_init(struct bttv *btv)
4801 char *sw_status = (char *)(&btv->mbox_we);
4804 gpio_inout(0x0003ff, 0x0003ff);
4805 gpio_write(1 << 9); /* reset MUX */
4807 /* Preset camera 0 to the 4 controllers */
4808 for (ix = 0; ix < 4; ix++) {
4810 kodicom4400r_write(btv, ix, ix, 1);
4813 * Since this is the "master", we need to set up the
4814 * other three controller chips' pointers to this structure
4815 * for later use in the muxsel routine.
4817 if ((btv->c.nr<1) || (btv->c.nr>BTTV_MAX-3))
4819 master[btv->c.nr-1] = btv;
4820 master[btv->c.nr] = btv;
4821 master[btv->c.nr+1] = btv;
4822 master[btv->c.nr+2] = btv;
4825 /* The Grandtec X-Guard framegrabber card uses two Dual 4-channel
4826 * video multiplexers to provide up to 16 video inputs. These
4827 * multiplexers are controlled by the lower 8 GPIO pins of the
4828 * bt878. The multiplexers probably Pericom PI5V331Q or similar.
4830 * xxx0 is pin xxx of multiplexer U5,
4831 * yyy1 is pin yyy of multiplexer U2
4843 static void xguard_muxsel(struct bttv *btv, unsigned int input)
4845 static const int masks[] = {
4846 ENB0, ENB0|IN00, ENB0|IN10, ENB0|IN00|IN10,
4847 ENA0, ENA0|IN00, ENA0|IN10, ENA0|IN00|IN10,
4848 ENB1, ENB1|IN01, ENB1|IN11, ENB1|IN01|IN11,
4849 ENA1, ENA1|IN01, ENA1|IN11, ENA1|IN01|IN11,
4851 gpio_write(masks[input%16]);
4853 static void picolo_tetra_init(struct bttv *btv)
4855 /*This is the video input redirection fonctionality : I DID NOT USED IT. */
4856 btwrite (0x08<<16,BT848_GPIO_DATA);/*GPIO[19] [==> 4053 B+C] set to 1 */
4857 btwrite (0x04<<16,BT848_GPIO_DATA);/*GPIO[18] [==> 4053 A] set to 1*/
4859 static void picolo_tetra_muxsel (struct bttv* btv, unsigned int input)
4862 dprintk (KERN_DEBUG "bttv%d : picolo_tetra_muxsel => input = %d\n",btv->c.nr,input);
4863 /*Just set the right path in the analog multiplexers : channel 1 -> 4 ==> Analog Mux ==> MUX0*/
4864 /*GPIO[20]&GPIO[21] used to choose the right input*/
4865 btwrite (input<<20,BT848_GPIO_DATA);
4870 * ivc120_muxsel [Added by Alan Garfield <alan@fromorbit.com>]
4872 * The IVC120G security card has 4 i2c controlled TDA8540 matrix
4873 * swichers to provide 16 channels to MUX0. The TDA8540's have
4874 * 4 independent outputs and as such the IVC120G also has the
4875 * optional "Monitor Out" bus. This allows the card to be looking
4876 * at one input while the monitor is looking at another.
4878 * Since I've couldn't be bothered figuring out how to add an
4879 * independant muxsel for the monitor bus, I've just set it to
4880 * whatever the card is looking at.
4882 * OUT0 of the TDA8540's is connected to MUX0 (0x03)
4883 * OUT1 of the TDA8540's is connected to "Monitor Out" (0x0C)
4885 * TDA8540_ALT3 IN0-3 = Channel 13 - 16 (0x03)
4886 * TDA8540_ALT4 IN0-3 = Channel 1 - 4 (0x03)
4887 * TDA8540_ALT5 IN0-3 = Channel 5 - 8 (0x03)
4888 * TDA8540_ALT6 IN0-3 = Channel 9 - 12 (0x03)
4892 /* All 7 possible sub-ids for the TDA8540 Matrix Switcher */
4893 #define I2C_TDA8540 0x90
4894 #define I2C_TDA8540_ALT1 0x92
4895 #define I2C_TDA8540_ALT2 0x94
4896 #define I2C_TDA8540_ALT3 0x96
4897 #define I2C_TDA8540_ALT4 0x98
4898 #define I2C_TDA8540_ALT5 0x9a
4899 #define I2C_TDA8540_ALT6 0x9c
4901 static void ivc120_muxsel(struct bttv *btv, unsigned int input)
4904 int key = input % 4;
4905 int matrix = input / 4;
4907 dprintk("bttv%d: ivc120_muxsel: Input - %02d | TDA - %02d | In - %02d\n",
4908 btv->c.nr, input, matrix, key);
4910 /* Handles the input selection on the TDA8540's */
4911 bttv_I2CWrite(btv, I2C_TDA8540_ALT3, 0x00,
4912 ((matrix == 3) ? (key | key << 2) : 0x00), 1);
4913 bttv_I2CWrite(btv, I2C_TDA8540_ALT4, 0x00,
4914 ((matrix == 0) ? (key | key << 2) : 0x00), 1);
4915 bttv_I2CWrite(btv, I2C_TDA8540_ALT5, 0x00,
4916 ((matrix == 1) ? (key | key << 2) : 0x00), 1);
4917 bttv_I2CWrite(btv, I2C_TDA8540_ALT6, 0x00,
4918 ((matrix == 2) ? (key | key << 2) : 0x00), 1);
4920 /* Handles the output enables on the TDA8540's */
4921 bttv_I2CWrite(btv, I2C_TDA8540_ALT3, 0x02,
4922 ((matrix == 3) ? 0x03 : 0x00), 1); /* 13 - 16 */
4923 bttv_I2CWrite(btv, I2C_TDA8540_ALT4, 0x02,
4924 ((matrix == 0) ? 0x03 : 0x00), 1); /* 1-4 */
4925 bttv_I2CWrite(btv, I2C_TDA8540_ALT5, 0x02,
4926 ((matrix == 1) ? 0x03 : 0x00), 1); /* 5-8 */
4927 bttv_I2CWrite(btv, I2C_TDA8540_ALT6, 0x02,
4928 ((matrix == 2) ? 0x03 : 0x00), 1); /* 9-12 */
4930 /* Selects MUX0 for input on the 878 */
4931 btaor((0)<<5, ~(3<<5), BT848_IFORM);
4935 /* PXC200 muxsel helper
4936 * luke@syseng.anu.edu.au
4937 * another transplant
4938 * from Alessandro Rubini (rubini@linux.it)
4940 * There are 4 kinds of cards:
4941 * PXC200L which is bt848
4942 * PXC200F which is bt848 with PIC controlling mux
4943 * PXC200AL which is bt878
4944 * PXC200AF which is bt878 with PIC controlling mux
4946 #define PX_CFG_PXC200F 0x01
4947 #define PX_FLAG_PXC200A 0x00001000 /* a pxc200A is bt-878 based */
4948 #define PX_I2C_PIC 0x0f
4949 #define PX_PXC200A_CARDID 0x200a1295
4950 #define PX_I2C_CMD_CFG 0x00
4952 static void PXC200_muxsel(struct bttv *btv, unsigned int input)
4957 unsigned char buf[2];
4959 /* Read PIC config to determine if this is a PXC200F */
4963 rc=bttv_I2CWrite(btv,(PX_I2C_PIC<<1),buf[0],buf[1],1);
4965 printk(KERN_DEBUG "bttv%d: PXC200_muxsel: pic cfg write failed:%d\n", btv->c.nr,rc);
4966 /* not PXC ? do nothing */
4970 rc=bttv_I2CRead(btv,(PX_I2C_PIC<<1),NULL);
4971 if (!(rc & PX_CFG_PXC200F)) {
4972 printk(KERN_DEBUG "bttv%d: PXC200_muxsel: not PXC200F rc:%d \n", btv->c.nr,rc);
4977 /* The multiplexer in the 200F is handled by the GPIO port */
4978 /* get correct mapping between inputs */
4979 /* mux = bttv_tvcards[btv->type].muxsel[input] & 3; */
4980 /* ** not needed!? */
4983 /* make sure output pins are enabled */
4984 /* bitmask=0x30f; */
4986 /* check whether we have a PXC200A */
4987 if (btv->cardid == PX_PXC200A_CARDID) {
4988 bitmask ^= 0x180; /* use 7 and 9, not 8 and 9 */
4989 bitmask |= 7<<4; /* the DAC */
4991 btwrite(bitmask, BT848_GPIO_OUT_EN);
4993 bitmask = btread(BT848_GPIO_DATA);
4994 if (btv->cardid == PX_PXC200A_CARDID)
4995 bitmask = (bitmask & ~0x280) | ((mux & 2) << 8) | ((mux & 1) << 7);
4996 else /* older device */
4997 bitmask = (bitmask & ~0x300) | ((mux & 3) << 8);
4998 btwrite(bitmask,BT848_GPIO_DATA);
5001 * Was "to be safe, set the bt848 to input 0"
5002 * Actually, since it's ok at load time, better not messing
5003 * with these bits (on PXC200AF you need to set mux 2 here)
5005 * needed because bttv-driver sets mux before calling this function
5007 if (btv->cardid == PX_PXC200A_CARDID)
5008 btaor(2<<5, ~BT848_IFORM_MUXSEL, BT848_IFORM);
5009 else /* older device */
5010 btand(~BT848_IFORM_MUXSEL,BT848_IFORM);
5012 printk(KERN_DEBUG "bttv%d: setting input channel to:%d\n", btv->c.nr,(int)mux);
5015 /* ----------------------------------------------------------------------- */
5016 /* motherboard chipset specific stuff */
5018 void __devinit bttv_check_chipset(void)
5020 int pcipci_fail = 0;
5021 struct pci_dev *dev = NULL;
5023 if (pci_pci_problems & (PCIPCI_FAIL|PCIAGP_FAIL)) /* should check if target is AGP */
5025 if (pci_pci_problems & (PCIPCI_TRITON|PCIPCI_NATOMA|PCIPCI_VIAETBF))
5027 if (pci_pci_problems & PCIPCI_VSFX)
5029 #ifdef PCIPCI_ALIMAGIK
5030 if (pci_pci_problems & PCIPCI_ALIMAGIK)
5035 /* print warnings about any quirks found */
5037 printk(KERN_INFO "bttv: Host bridge needs ETBF enabled.\n");
5039 printk(KERN_INFO "bttv: Host bridge needs VSFX enabled.\n");
5041 printk(KERN_INFO "bttv: bttv and your chipset may not work "
5044 printk(KERN_INFO "bttv: overlay will be disabled.\n");
5047 printk(KERN_INFO "bttv: overlay forced. Use this "
5048 "option at your own risk.\n");
5051 if (UNSET != latency)
5052 printk(KERN_INFO "bttv: pci latency fixup [%d]\n",latency);
5053 while ((dev = pci_get_device(PCI_VENDOR_ID_INTEL,
5054 PCI_DEVICE_ID_INTEL_82441, dev))) {
5056 pci_read_config_byte(dev, 0x53, &b);
5058 printk(KERN_INFO "bttv: Host bridge: 82441FX Natoma, "
5059 "bufcon=0x%02x\n",b);
5063 int __devinit bttv_handle_chipset(struct bttv *btv)
5065 unsigned char command;
5067 if (!triton1 && !vsfx && UNSET == latency)
5072 printk(KERN_INFO "bttv%d: enabling ETBF (430FX/VP3 compatibilty)\n",btv->c.nr);
5073 if (vsfx && btv->id >= 878)
5074 printk(KERN_INFO "bttv%d: enabling VSFX\n",btv->c.nr);
5075 if (UNSET != latency)
5076 printk(KERN_INFO "bttv%d: setting pci timer to %d\n",
5080 if (btv->id < 878) {
5081 /* bt848 (mis)uses a bit in the irq mask for etbf */
5083 btv->triton1 = BT848_INT_ETBF;
5085 /* bt878 has a bit in the pci config space for it */
5086 pci_read_config_byte(btv->c.pci, BT878_DEVCTRL, &command);
5088 command |= BT878_EN_TBFX;
5090 command |= BT878_EN_VSFX;
5091 pci_write_config_byte(btv->c.pci, BT878_DEVCTRL, command);
5093 if (UNSET != latency)
5094 pci_write_config_byte(btv->c.pci, PCI_LATENCY_TIMER, latency);