Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6
[linux-2.6] / drivers / net / chelsio / subr.c
1 /*****************************************************************************
2  *                                                                           *
3  * File: subr.c                                                              *
4  * $Revision: 1.27 $                                                         *
5  * $Date: 2005/06/22 01:08:36 $                                              *
6  * Description:                                                              *
7  *  Various subroutines (intr,pio,etc.) used by Chelsio 10G Ethernet driver. *
8  *  part of the Chelsio 10Gb Ethernet Driver.                                *
9  *                                                                           *
10  * This program is free software; you can redistribute it and/or modify      *
11  * it under the terms of the GNU General Public License, version 2, as       *
12  * published by the Free Software Foundation.                                *
13  *                                                                           *
14  * You should have received a copy of the GNU General Public License along   *
15  * with this program; if not, write to the Free Software Foundation, Inc.,   *
16  * 59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.                 *
17  *                                                                           *
18  * THIS SOFTWARE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR IMPLIED    *
19  * WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED WARRANTIES OF      *
20  * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.                     *
21  *                                                                           *
22  * http://www.chelsio.com                                                    *
23  *                                                                           *
24  * Copyright (c) 2003 - 2005 Chelsio Communications, Inc.                    *
25  * All rights reserved.                                                      *
26  *                                                                           *
27  * Maintainers: maintainers@chelsio.com                                      *
28  *                                                                           *
29  * Authors: Dimitrios Michailidis   <dm@chelsio.com>                         *
30  *          Tina Yang               <tainay@chelsio.com>                     *
31  *          Felix Marti             <felix@chelsio.com>                      *
32  *          Scott Bardone           <sbardone@chelsio.com>                   *
33  *          Kurt Ottaway            <kottaway@chelsio.com>                   *
34  *          Frank DiMambro          <frank@chelsio.com>                      *
35  *                                                                           *
36  * History:                                                                  *
37  *                                                                           *
38  ****************************************************************************/
39
40 #include "common.h"
41 #include "elmer0.h"
42 #include "regs.h"
43 #include "gmac.h"
44 #include "cphy.h"
45 #include "sge.h"
46 #include "tp.h"
47 #include "espi.h"
48
49 /**
50  *      t1_wait_op_done - wait until an operation is completed
51  *      @adapter: the adapter performing the operation
52  *      @reg: the register to check for completion
53  *      @mask: a single-bit field within @reg that indicates completion
54  *      @polarity: the value of the field when the operation is completed
55  *      @attempts: number of check iterations
56  *      @delay: delay in usecs between iterations
57  *
58  *      Wait until an operation is completed by checking a bit in a register
59  *      up to @attempts times.  Returns %0 if the operation completes and %1
60  *      otherwise.
61  */
62 static int t1_wait_op_done(adapter_t *adapter, int reg, u32 mask, int polarity,
63                            int attempts, int delay)
64 {
65         while (1) {
66                 u32 val = readl(adapter->regs + reg) & mask;
67
68                 if (!!val == polarity)
69                         return 0;
70                 if (--attempts == 0)
71                         return 1;
72                 if (delay)
73                         udelay(delay);
74         }
75 }
76
77 #define TPI_ATTEMPTS 50
78
79 /*
80  * Write a register over the TPI interface (unlocked and locked versions).
81  */
82 int __t1_tpi_write(adapter_t *adapter, u32 addr, u32 value)
83 {
84         int tpi_busy;
85
86         writel(addr, adapter->regs + A_TPI_ADDR);
87         writel(value, adapter->regs + A_TPI_WR_DATA);
88         writel(F_TPIWR, adapter->regs + A_TPI_CSR);
89
90         tpi_busy = t1_wait_op_done(adapter, A_TPI_CSR, F_TPIRDY, 1,
91                                    TPI_ATTEMPTS, 3);
92         if (tpi_busy)
93                 CH_ALERT("%s: TPI write to 0x%x failed\n",
94                          adapter->name, addr);
95         return tpi_busy;
96 }
97
98 int t1_tpi_write(adapter_t *adapter, u32 addr, u32 value)
99 {
100         int ret;
101
102         spin_lock(&adapter->tpi_lock);
103         ret = __t1_tpi_write(adapter, addr, value);
104         spin_unlock(&adapter->tpi_lock);
105         return ret;
106 }
107
108 /*
109  * Read a register over the TPI interface (unlocked and locked versions).
110  */
111 int __t1_tpi_read(adapter_t *adapter, u32 addr, u32 *valp)
112 {
113         int tpi_busy;
114
115         writel(addr, adapter->regs + A_TPI_ADDR);
116         writel(0, adapter->regs + A_TPI_CSR);
117
118         tpi_busy = t1_wait_op_done(adapter, A_TPI_CSR, F_TPIRDY, 1,
119                                    TPI_ATTEMPTS, 3);
120         if (tpi_busy)
121                 CH_ALERT("%s: TPI read from 0x%x failed\n",
122                          adapter->name, addr);
123         else
124                 *valp = readl(adapter->regs + A_TPI_RD_DATA);
125         return tpi_busy;
126 }
127
128 int t1_tpi_read(adapter_t *adapter, u32 addr, u32 *valp)
129 {
130         int ret;
131
132         spin_lock(&adapter->tpi_lock);
133         ret = __t1_tpi_read(adapter, addr, valp);
134         spin_unlock(&adapter->tpi_lock);
135         return ret;
136 }
137
138 /*
139  * Set a TPI parameter.
140  */
141 static void t1_tpi_par(adapter_t *adapter, u32 value)
142 {
143         writel(V_TPIPAR(value), adapter->regs + A_TPI_PAR);
144 }
145
146 /*
147  * Called when a port's link settings change to propagate the new values to the
148  * associated PHY and MAC.  After performing the common tasks it invokes an
149  * OS-specific handler.
150  */
151 void t1_link_changed(adapter_t *adapter, int port_id)
152 {
153         int link_ok, speed, duplex, fc;
154         struct cphy *phy = adapter->port[port_id].phy;
155         struct link_config *lc = &adapter->port[port_id].link_config;
156
157         phy->ops->get_link_status(phy, &link_ok, &speed, &duplex, &fc);
158
159         lc->speed = speed < 0 ? SPEED_INVALID : speed;
160         lc->duplex = duplex < 0 ? DUPLEX_INVALID : duplex;
161         if (!(lc->requested_fc & PAUSE_AUTONEG))
162                 fc = lc->requested_fc & (PAUSE_RX | PAUSE_TX);
163
164         if (link_ok && speed >= 0 && lc->autoneg == AUTONEG_ENABLE) {
165                 /* Set MAC speed, duplex, and flow control to match PHY. */
166                 struct cmac *mac = adapter->port[port_id].mac;
167
168                 mac->ops->set_speed_duplex_fc(mac, speed, duplex, fc);
169                 lc->fc = (unsigned char)fc;
170         }
171         t1_link_negotiated(adapter, port_id, link_ok, speed, duplex, fc);
172 }
173
174 static int t1_pci_intr_handler(adapter_t *adapter)
175 {
176         u32 pcix_cause;
177
178         pci_read_config_dword(adapter->pdev, A_PCICFG_INTR_CAUSE, &pcix_cause);
179
180         if (pcix_cause) {
181                 pci_write_config_dword(adapter->pdev, A_PCICFG_INTR_CAUSE,
182                                        pcix_cause);
183                 t1_fatal_err(adapter);    /* PCI errors are fatal */
184         }
185         return 0;
186 }
187
188 #ifdef CONFIG_CHELSIO_T1_COUGAR
189 #include "cspi.h"
190 #endif
191 #ifdef CONFIG_CHELSIO_T1_1G
192 #include "fpga_defs.h"
193
194 /*
195  * PHY interrupt handler for FPGA boards.
196  */
197 static int fpga_phy_intr_handler(adapter_t *adapter)
198 {
199         int p;
200         u32 cause = readl(adapter->regs + FPGA_GMAC_ADDR_INTERRUPT_CAUSE);
201
202         for_each_port(adapter, p)
203                 if (cause & (1 << p)) {
204                         struct cphy *phy = adapter->port[p].phy;
205                         int phy_cause = phy->ops->interrupt_handler(phy);
206
207                         if (phy_cause & cphy_cause_link_change)
208                                 t1_link_changed(adapter, p);
209                 }
210         writel(cause, adapter->regs + FPGA_GMAC_ADDR_INTERRUPT_CAUSE);
211         return 0;
212 }
213
214 /*
215  * Slow path interrupt handler for FPGAs.
216  */
217 static int fpga_slow_intr(adapter_t *adapter)
218 {
219         u32 cause = readl(adapter->regs + A_PL_CAUSE);
220
221         cause &= ~F_PL_INTR_SGE_DATA;
222         if (cause & F_PL_INTR_SGE_ERR)
223                 t1_sge_intr_error_handler(adapter->sge);
224
225         if (cause & FPGA_PCIX_INTERRUPT_GMAC)
226                 fpga_phy_intr_handler(adapter);
227
228         if (cause & FPGA_PCIX_INTERRUPT_TP) {
229                 /*
230                  * FPGA doesn't support MC4 interrupts and it requires
231                  * this odd layer of indirection for MC5.
232                  */
233                 u32 tp_cause = readl(adapter->regs + FPGA_TP_ADDR_INTERRUPT_CAUSE);
234
235                 /* Clear TP interrupt */
236                 writel(tp_cause, adapter->regs + FPGA_TP_ADDR_INTERRUPT_CAUSE);
237         }
238         if (cause & FPGA_PCIX_INTERRUPT_PCIX)
239                 t1_pci_intr_handler(adapter);
240
241         /* Clear the interrupts just processed. */
242         if (cause)
243                 writel(cause, adapter->regs + A_PL_CAUSE);
244
245         return cause != 0;
246 }
247 #endif
248
249 /*
250  * Wait until Elmer's MI1 interface is ready for new operations.
251  */
252 static int mi1_wait_until_ready(adapter_t *adapter, int mi1_reg)
253 {
254         int attempts = 100, busy;
255
256         do {
257                 u32 val;
258
259                 __t1_tpi_read(adapter, mi1_reg, &val);
260                 busy = val & F_MI1_OP_BUSY;
261                 if (busy)
262                         udelay(10);
263         } while (busy && --attempts);
264         if (busy)
265                 CH_ALERT("%s: MDIO operation timed out\n", adapter->name);
266         return busy;
267 }
268
269 /*
270  * MI1 MDIO initialization.
271  */
272 static void mi1_mdio_init(adapter_t *adapter, const struct board_info *bi)
273 {
274         u32 clkdiv = bi->clock_elmer0 / (2 * bi->mdio_mdc) - 1;
275         u32 val = F_MI1_PREAMBLE_ENABLE | V_MI1_MDI_INVERT(bi->mdio_mdiinv) |
276                 V_MI1_MDI_ENABLE(bi->mdio_mdien) | V_MI1_CLK_DIV(clkdiv);
277
278         if (!(bi->caps & SUPPORTED_10000baseT_Full))
279                 val |= V_MI1_SOF(1);
280         t1_tpi_write(adapter, A_ELMER0_PORT0_MI1_CFG, val);
281 }
282
283 #if defined(CONFIG_CHELSIO_T1_1G) || defined(CONFIG_CHELSIO_T1_COUGAR)
284 /*
285  * Elmer MI1 MDIO read/write operations.
286  */
287 static int mi1_mdio_read(adapter_t *adapter, int phy_addr, int mmd_addr,
288                          int reg_addr, unsigned int *valp)
289 {
290         u32 addr = V_MI1_REG_ADDR(reg_addr) | V_MI1_PHY_ADDR(phy_addr);
291
292         if (mmd_addr)
293                 return -EINVAL;
294
295         spin_lock(&adapter->tpi_lock);
296         __t1_tpi_write(adapter, A_ELMER0_PORT0_MI1_ADDR, addr);
297         __t1_tpi_write(adapter,
298                         A_ELMER0_PORT0_MI1_OP, MI1_OP_DIRECT_READ);
299         mi1_wait_until_ready(adapter, A_ELMER0_PORT0_MI1_OP);
300         __t1_tpi_read(adapter, A_ELMER0_PORT0_MI1_DATA, valp);
301         spin_unlock(&adapter->tpi_lock);
302         return 0;
303 }
304
305 static int mi1_mdio_write(adapter_t *adapter, int phy_addr, int mmd_addr,
306                           int reg_addr, unsigned int val)
307 {
308         u32 addr = V_MI1_REG_ADDR(reg_addr) | V_MI1_PHY_ADDR(phy_addr);
309
310         if (mmd_addr)
311                 return -EINVAL;
312
313         spin_lock(&adapter->tpi_lock);
314         __t1_tpi_write(adapter, A_ELMER0_PORT0_MI1_ADDR, addr);
315         __t1_tpi_write(adapter, A_ELMER0_PORT0_MI1_DATA, val);
316         __t1_tpi_write(adapter,
317                         A_ELMER0_PORT0_MI1_OP, MI1_OP_DIRECT_WRITE);
318         mi1_wait_until_ready(adapter, A_ELMER0_PORT0_MI1_OP);
319         spin_unlock(&adapter->tpi_lock);
320         return 0;
321 }
322
323 #if defined(CONFIG_CHELSIO_T1_1G) || defined(CONFIG_CHELSIO_T1_COUGAR)
324 static const struct mdio_ops mi1_mdio_ops = {
325         .init = mi1_mdio_init,
326         .read = mi1_mdio_read,
327         .write = mi1_mdio_write
328 };
329 #endif
330
331 #endif
332
333 static int mi1_mdio_ext_read(adapter_t *adapter, int phy_addr, int mmd_addr,
334                              int reg_addr, unsigned int *valp)
335 {
336         u32 addr = V_MI1_REG_ADDR(mmd_addr) | V_MI1_PHY_ADDR(phy_addr);
337
338         spin_lock(&adapter->tpi_lock);
339
340         /* Write the address we want. */
341         __t1_tpi_write(adapter, A_ELMER0_PORT0_MI1_ADDR, addr);
342         __t1_tpi_write(adapter, A_ELMER0_PORT0_MI1_DATA, reg_addr);
343         __t1_tpi_write(adapter, A_ELMER0_PORT0_MI1_OP,
344                        MI1_OP_INDIRECT_ADDRESS);
345         mi1_wait_until_ready(adapter, A_ELMER0_PORT0_MI1_OP);
346
347         /* Write the operation we want. */
348         __t1_tpi_write(adapter,
349                         A_ELMER0_PORT0_MI1_OP, MI1_OP_INDIRECT_READ);
350         mi1_wait_until_ready(adapter, A_ELMER0_PORT0_MI1_OP);
351
352         /* Read the data. */
353         __t1_tpi_read(adapter, A_ELMER0_PORT0_MI1_DATA, valp);
354         spin_unlock(&adapter->tpi_lock);
355         return 0;
356 }
357
358 static int mi1_mdio_ext_write(adapter_t *adapter, int phy_addr, int mmd_addr,
359                               int reg_addr, unsigned int val)
360 {
361         u32 addr = V_MI1_REG_ADDR(mmd_addr) | V_MI1_PHY_ADDR(phy_addr);
362
363         spin_lock(&adapter->tpi_lock);
364
365         /* Write the address we want. */
366         __t1_tpi_write(adapter, A_ELMER0_PORT0_MI1_ADDR, addr);
367         __t1_tpi_write(adapter, A_ELMER0_PORT0_MI1_DATA, reg_addr);
368         __t1_tpi_write(adapter, A_ELMER0_PORT0_MI1_OP,
369                        MI1_OP_INDIRECT_ADDRESS);
370         mi1_wait_until_ready(adapter, A_ELMER0_PORT0_MI1_OP);
371
372         /* Write the data. */
373         __t1_tpi_write(adapter, A_ELMER0_PORT0_MI1_DATA, val);
374         __t1_tpi_write(adapter, A_ELMER0_PORT0_MI1_OP, MI1_OP_INDIRECT_WRITE);
375         mi1_wait_until_ready(adapter, A_ELMER0_PORT0_MI1_OP);
376         spin_unlock(&adapter->tpi_lock);
377         return 0;
378 }
379
380 static const struct mdio_ops mi1_mdio_ext_ops = {
381         .init = mi1_mdio_init,
382         .read = mi1_mdio_ext_read,
383         .write = mi1_mdio_ext_write
384 };
385
386 enum {
387         CH_BRD_T110_1CU,
388         CH_BRD_N110_1F,
389         CH_BRD_N210_1F,
390         CH_BRD_T210_1F,
391         CH_BRD_T210_1CU,
392         CH_BRD_N204_4CU,
393 };
394
395 static const struct board_info t1_board[] = {
396         {
397                 .board          = CHBT_BOARD_CHT110,
398                 .port_number    = 1,
399                 .caps           = SUPPORTED_10000baseT_Full,
400                 .chip_term      = CHBT_TERM_T1,
401                 .chip_mac       = CHBT_MAC_PM3393,
402                 .chip_phy       = CHBT_PHY_MY3126,
403                 .clock_core     = 125000000,
404                 .clock_mc3      = 150000000,
405                 .clock_mc4      = 125000000,
406                 .espi_nports    = 1,
407                 .clock_elmer0   = 44,
408                 .mdio_mdien     = 1,
409                 .mdio_mdiinv    = 1,
410                 .mdio_mdc       = 1,
411                 .mdio_phybaseaddr = 1,
412                 .gmac           = &t1_pm3393_ops,
413                 .gphy           = &t1_my3126_ops,
414                 .mdio_ops       = &mi1_mdio_ext_ops,
415                 .desc           = "Chelsio T110 1x10GBase-CX4 TOE",
416         },
417
418         {
419                 .board          = CHBT_BOARD_N110,
420                 .port_number    = 1,
421                 .caps           = SUPPORTED_10000baseT_Full | SUPPORTED_FIBRE,
422                 .chip_term      = CHBT_TERM_T1,
423                 .chip_mac       = CHBT_MAC_PM3393,
424                 .chip_phy       = CHBT_PHY_88X2010,
425                 .clock_core     = 125000000,
426                 .espi_nports    = 1,
427                 .clock_elmer0   = 44,
428                 .mdio_mdien     = 0,
429                 .mdio_mdiinv    = 0,
430                 .mdio_mdc       = 1,
431                 .mdio_phybaseaddr = 0,
432                 .gmac           = &t1_pm3393_ops,
433                 .gphy           = &t1_mv88x201x_ops,
434                 .mdio_ops       = &mi1_mdio_ext_ops,
435                 .desc           = "Chelsio N110 1x10GBaseX NIC",
436         },
437
438         {
439                 .board          = CHBT_BOARD_N210,
440                 .port_number    = 1,
441                 .caps           = SUPPORTED_10000baseT_Full | SUPPORTED_FIBRE,
442                 .chip_term      = CHBT_TERM_T2,
443                 .chip_mac       = CHBT_MAC_PM3393,
444                 .chip_phy       = CHBT_PHY_88X2010,
445                 .clock_core     = 125000000,
446                 .espi_nports    = 1,
447                 .clock_elmer0   = 44,
448                 .mdio_mdien     = 0,
449                 .mdio_mdiinv    = 0,
450                 .mdio_mdc       = 1,
451                 .mdio_phybaseaddr = 0,
452                 .gmac           = &t1_pm3393_ops,
453                 .gphy           = &t1_mv88x201x_ops,
454                 .mdio_ops       = &mi1_mdio_ext_ops,
455                 .desc           = "Chelsio N210 1x10GBaseX NIC",
456         },
457
458         {
459                 .board          = CHBT_BOARD_CHT210,
460                 .port_number    = 1,
461                 .caps           = SUPPORTED_10000baseT_Full,
462                 .chip_term      = CHBT_TERM_T2,
463                 .chip_mac       = CHBT_MAC_PM3393,
464                 .chip_phy       = CHBT_PHY_88X2010,
465                 .clock_core     = 125000000,
466                 .clock_mc3      = 133000000,
467                 .clock_mc4      = 125000000,
468                 .espi_nports    = 1,
469                 .clock_elmer0   = 44,
470                 .mdio_mdien     = 0,
471                 .mdio_mdiinv    = 0,
472                 .mdio_mdc       = 1,
473                 .mdio_phybaseaddr = 0,
474                 .gmac           = &t1_pm3393_ops,
475                 .gphy           = &t1_mv88x201x_ops,
476                 .mdio_ops       = &mi1_mdio_ext_ops,
477                 .desc           = "Chelsio T210 1x10GBaseX TOE",
478         },
479
480         {
481                 .board          = CHBT_BOARD_CHT210,
482                 .port_number    = 1,
483                 .caps           = SUPPORTED_10000baseT_Full,
484                 .chip_term      = CHBT_TERM_T2,
485                 .chip_mac       = CHBT_MAC_PM3393,
486                 .chip_phy       = CHBT_PHY_MY3126,
487                 .clock_core     = 125000000,
488                 .clock_mc3      = 133000000,
489                 .clock_mc4      = 125000000,
490                 .espi_nports    = 1,
491                 .clock_elmer0   = 44,
492                 .mdio_mdien     = 1,
493                 .mdio_mdiinv    = 1,
494                 .mdio_mdc       = 1,
495                 .mdio_phybaseaddr = 1,
496                 .gmac           = &t1_pm3393_ops,
497                 .gphy           = &t1_my3126_ops,
498                 .mdio_ops       = &mi1_mdio_ext_ops,
499                 .desc           = "Chelsio T210 1x10GBase-CX4 TOE",
500         },
501
502 #ifdef CONFIG_CHELSIO_T1_1G
503         {
504                 .board          = CHBT_BOARD_CHN204,
505                 .port_number    = 4,
506                 .caps           = SUPPORTED_10baseT_Half | SUPPORTED_10baseT_Full
507                                 | SUPPORTED_100baseT_Half | SUPPORTED_100baseT_Full
508                                 | SUPPORTED_1000baseT_Full | SUPPORTED_Autoneg |
509                                   SUPPORTED_PAUSE | SUPPORTED_TP,
510                 .chip_term      = CHBT_TERM_T2,
511                 .chip_mac       = CHBT_MAC_VSC7321,
512                 .chip_phy       = CHBT_PHY_88E1111,
513                 .clock_core     = 100000000,
514                 .espi_nports    = 4,
515                 .clock_elmer0   = 44,
516                 .mdio_mdien     = 0,
517                 .mdio_mdiinv    = 0,
518                 .mdio_mdc       = 0,
519                 .mdio_phybaseaddr = 4,
520                 .gmac           = &t1_vsc7326_ops,
521                 .gphy           = &t1_mv88e1xxx_ops,
522                 .mdio_ops       = &mi1_mdio_ops,
523                 .desc           = "Chelsio N204 4x100/1000BaseT NIC",
524         },
525 #endif
526
527 };
528
529 struct pci_device_id t1_pci_tbl[] = {
530         CH_DEVICE(8, 0, CH_BRD_T110_1CU),
531         CH_DEVICE(8, 1, CH_BRD_T110_1CU),
532         CH_DEVICE(7, 0, CH_BRD_N110_1F),
533         CH_DEVICE(10, 1, CH_BRD_N210_1F),
534         CH_DEVICE(11, 1, CH_BRD_T210_1F),
535         CH_DEVICE(14, 1, CH_BRD_T210_1CU),
536         CH_DEVICE(16, 1, CH_BRD_N204_4CU),
537         { 0 }
538 };
539
540 MODULE_DEVICE_TABLE(pci, t1_pci_tbl);
541
542 /*
543  * Return the board_info structure with a given index.  Out-of-range indices
544  * return NULL.
545  */
546 const struct board_info *t1_get_board_info(unsigned int board_id)
547 {
548         return board_id < ARRAY_SIZE(t1_board) ? &t1_board[board_id] : NULL;
549 }
550
551 struct chelsio_vpd_t {
552         u32 format_version;
553         u8 serial_number[16];
554         u8 mac_base_address[6];
555         u8 pad[2];           /* make multiple-of-4 size requirement explicit */
556 };
557
558 #define EEPROMSIZE        (8 * 1024)
559 #define EEPROM_MAX_POLL   4
560
561 /*
562  * Read SEEPROM. A zero is written to the flag register when the addres is
563  * written to the Control register. The hardware device will set the flag to a
564  * one when 4B have been transferred to the Data register.
565  */
566 int t1_seeprom_read(adapter_t *adapter, u32 addr, u32 *data)
567 {
568         int i = EEPROM_MAX_POLL;
569         u16 val;
570
571         if (addr >= EEPROMSIZE || (addr & 3))
572                 return -EINVAL;
573
574         pci_write_config_word(adapter->pdev, A_PCICFG_VPD_ADDR, (u16)addr);
575         do {
576                 udelay(50);
577                 pci_read_config_word(adapter->pdev, A_PCICFG_VPD_ADDR, &val);
578         } while (!(val & F_VPD_OP_FLAG) && --i);
579
580         if (!(val & F_VPD_OP_FLAG)) {
581                 CH_ERR("%s: reading EEPROM address 0x%x failed\n",
582                        adapter->name, addr);
583                 return -EIO;
584         }
585         pci_read_config_dword(adapter->pdev, A_PCICFG_VPD_DATA, data);
586         *data = le32_to_cpu(*data);
587         return 0;
588 }
589
590 static int t1_eeprom_vpd_get(adapter_t *adapter, struct chelsio_vpd_t *vpd)
591 {
592         int addr, ret = 0;
593
594         for (addr = 0; !ret && addr < sizeof(*vpd); addr += sizeof(u32))
595                 ret = t1_seeprom_read(adapter, addr,
596                                       (u32 *)((u8 *)vpd + addr));
597
598         return ret;
599 }
600
601 /*
602  * Read a port's MAC address from the VPD ROM.
603  */
604 static int vpd_macaddress_get(adapter_t *adapter, int index, u8 mac_addr[])
605 {
606         struct chelsio_vpd_t vpd;
607
608         if (t1_eeprom_vpd_get(adapter, &vpd))
609                 return 1;
610         memcpy(mac_addr, vpd.mac_base_address, 5);
611         mac_addr[5] = vpd.mac_base_address[5] + index;
612         return 0;
613 }
614
615 /*
616  * Set up the MAC/PHY according to the requested link settings.
617  *
618  * If the PHY can auto-negotiate first decide what to advertise, then
619  * enable/disable auto-negotiation as desired and reset.
620  *
621  * If the PHY does not auto-negotiate we just reset it.
622  *
623  * If auto-negotiation is off set the MAC to the proper speed/duplex/FC,
624  * otherwise do it later based on the outcome of auto-negotiation.
625  */
626 int t1_link_start(struct cphy *phy, struct cmac *mac, struct link_config *lc)
627 {
628         unsigned int fc = lc->requested_fc & (PAUSE_RX | PAUSE_TX);
629
630         if (lc->supported & SUPPORTED_Autoneg) {
631                 lc->advertising &= ~(ADVERTISED_ASYM_PAUSE | ADVERTISED_PAUSE);
632                 if (fc) {
633                         if (fc == ((PAUSE_RX | PAUSE_TX) &
634                                    (mac->adapter->params.nports < 2)))
635                                 lc->advertising |= ADVERTISED_PAUSE;
636                         else {
637                                 lc->advertising |= ADVERTISED_ASYM_PAUSE;
638                                 if (fc == PAUSE_RX)
639                                         lc->advertising |= ADVERTISED_PAUSE;
640                         }
641                 }
642                 phy->ops->advertise(phy, lc->advertising);
643
644                 if (lc->autoneg == AUTONEG_DISABLE) {
645                         lc->speed = lc->requested_speed;
646                         lc->duplex = lc->requested_duplex;
647                         lc->fc = (unsigned char)fc;
648                         mac->ops->set_speed_duplex_fc(mac, lc->speed,
649                                                       lc->duplex, fc);
650                         /* Also disables autoneg */
651                         phy->state = PHY_AUTONEG_RDY;
652                         phy->ops->set_speed_duplex(phy, lc->speed, lc->duplex);
653                         phy->ops->reset(phy, 0);
654                 } else {
655                         phy->state = PHY_AUTONEG_EN;
656                         phy->ops->autoneg_enable(phy); /* also resets PHY */
657                 }
658         } else {
659                 phy->state = PHY_AUTONEG_RDY;
660                 mac->ops->set_speed_duplex_fc(mac, -1, -1, fc);
661                 lc->fc = (unsigned char)fc;
662                 phy->ops->reset(phy, 0);
663         }
664         return 0;
665 }
666
667 /*
668  * External interrupt handler for boards using elmer0.
669  */
670 int t1_elmer0_ext_intr_handler(adapter_t *adapter)
671 {
672         struct cphy *phy;
673         int phy_cause;
674         u32 cause;
675
676         t1_tpi_read(adapter, A_ELMER0_INT_CAUSE, &cause);
677
678         switch (board_info(adapter)->board) {
679 #ifdef CONFIG_CHELSIO_T1_1G
680         case CHBT_BOARD_CHT204:
681         case CHBT_BOARD_CHT204E:
682         case CHBT_BOARD_CHN204:
683         case CHBT_BOARD_CHT204V: {
684                 int i, port_bit;
685                 for_each_port(adapter, i) {
686                         port_bit = i + 1;
687                         if (!(cause & (1 << port_bit)))
688                                 continue;
689
690                         phy = adapter->port[i].phy;
691                         phy_cause = phy->ops->interrupt_handler(phy);
692                         if (phy_cause & cphy_cause_link_change)
693                                 t1_link_changed(adapter, i);
694                 }
695                 break;
696         }
697         case CHBT_BOARD_CHT101:
698                 if (cause & ELMER0_GP_BIT1) { /* Marvell 88E1111 interrupt */
699                         phy = adapter->port[0].phy;
700                         phy_cause = phy->ops->interrupt_handler(phy);
701                         if (phy_cause & cphy_cause_link_change)
702                                 t1_link_changed(adapter, 0);
703                 }
704                 break;
705         case CHBT_BOARD_7500: {
706                 int p;
707                 /*
708                  * Elmer0's interrupt cause isn't useful here because there is
709                  * only one bit that can be set for all 4 ports.  This means
710                  * we are forced to check every PHY's interrupt status
711                  * register to see who initiated the interrupt.
712                  */
713                 for_each_port(adapter, p) {
714                         phy = adapter->port[p].phy;
715                         phy_cause = phy->ops->interrupt_handler(phy);
716                         if (phy_cause & cphy_cause_link_change)
717                             t1_link_changed(adapter, p);
718                 }
719                 break;
720         }
721 #endif
722         case CHBT_BOARD_CHT210:
723         case CHBT_BOARD_N210:
724         case CHBT_BOARD_N110:
725                 if (cause & ELMER0_GP_BIT6) { /* Marvell 88x2010 interrupt */
726                         phy = adapter->port[0].phy;
727                         phy_cause = phy->ops->interrupt_handler(phy);
728                         if (phy_cause & cphy_cause_link_change)
729                                 t1_link_changed(adapter, 0);
730                 }
731                 break;
732         case CHBT_BOARD_8000:
733         case CHBT_BOARD_CHT110:
734                 CH_DBG(adapter, INTR, "External interrupt cause 0x%x\n",
735                        cause);
736                 if (cause & ELMER0_GP_BIT1) {        /* PMC3393 INTB */
737                         struct cmac *mac = adapter->port[0].mac;
738
739                         mac->ops->interrupt_handler(mac);
740                 }
741                 if (cause & ELMER0_GP_BIT5) {        /* XPAK MOD_DETECT */
742                         u32 mod_detect;
743
744                         t1_tpi_read(adapter,
745                                         A_ELMER0_GPI_STAT, &mod_detect);
746                         CH_MSG(adapter, INFO, LINK, "XPAK %s\n",
747                                mod_detect ? "removed" : "inserted");
748                 }
749                 break;
750 #ifdef CONFIG_CHELSIO_T1_COUGAR
751         case CHBT_BOARD_COUGAR:
752                 if (adapter->params.nports == 1) {
753                         if (cause & ELMER0_GP_BIT1) {         /* Vitesse MAC */
754                                 struct cmac *mac = adapter->port[0].mac;
755                                 mac->ops->interrupt_handler(mac);
756                         }
757                         if (cause & ELMER0_GP_BIT5) {     /* XPAK MOD_DETECT */
758                         }
759                 } else {
760                         int i, port_bit;
761
762                         for_each_port(adapter, i) {
763                                 port_bit = i ? i + 1 : 0;
764                                 if (!(cause & (1 << port_bit)))
765                                         continue;
766
767                                 phy = adapter->port[i].phy;
768                                 phy_cause = phy->ops->interrupt_handler(phy);
769                                 if (phy_cause & cphy_cause_link_change)
770                                         t1_link_changed(adapter, i);
771                         }
772                 }
773                 break;
774 #endif
775         }
776         t1_tpi_write(adapter, A_ELMER0_INT_CAUSE, cause);
777         return 0;
778 }
779
780 /* Enables all interrupts. */
781 void t1_interrupts_enable(adapter_t *adapter)
782 {
783         unsigned int i;
784
785         adapter->slow_intr_mask = F_PL_INTR_SGE_ERR | F_PL_INTR_TP;
786
787         t1_sge_intr_enable(adapter->sge);
788         t1_tp_intr_enable(adapter->tp);
789         if (adapter->espi) {
790                 adapter->slow_intr_mask |= F_PL_INTR_ESPI;
791                 t1_espi_intr_enable(adapter->espi);
792         }
793
794         /* Enable MAC/PHY interrupts for each port. */
795         for_each_port(adapter, i) {
796                 adapter->port[i].mac->ops->interrupt_enable(adapter->port[i].mac);
797                 adapter->port[i].phy->ops->interrupt_enable(adapter->port[i].phy);
798         }
799
800         /* Enable PCIX & external chip interrupts on ASIC boards. */
801         if (t1_is_asic(adapter)) {
802                 u32 pl_intr = readl(adapter->regs + A_PL_ENABLE);
803
804                 /* PCI-X interrupts */
805                 pci_write_config_dword(adapter->pdev, A_PCICFG_INTR_ENABLE,
806                                        0xffffffff);
807
808                 adapter->slow_intr_mask |= F_PL_INTR_EXT | F_PL_INTR_PCIX;
809                 pl_intr |= F_PL_INTR_EXT | F_PL_INTR_PCIX;
810                 writel(pl_intr, adapter->regs + A_PL_ENABLE);
811         }
812 }
813
814 /* Disables all interrupts. */
815 void t1_interrupts_disable(adapter_t* adapter)
816 {
817         unsigned int i;
818
819         t1_sge_intr_disable(adapter->sge);
820         t1_tp_intr_disable(adapter->tp);
821         if (adapter->espi)
822                 t1_espi_intr_disable(adapter->espi);
823
824         /* Disable MAC/PHY interrupts for each port. */
825         for_each_port(adapter, i) {
826                 adapter->port[i].mac->ops->interrupt_disable(adapter->port[i].mac);
827                 adapter->port[i].phy->ops->interrupt_disable(adapter->port[i].phy);
828         }
829
830         /* Disable PCIX & external chip interrupts. */
831         if (t1_is_asic(adapter))
832                 writel(0, adapter->regs + A_PL_ENABLE);
833
834         /* PCI-X interrupts */
835         pci_write_config_dword(adapter->pdev, A_PCICFG_INTR_ENABLE, 0);
836
837         adapter->slow_intr_mask = 0;
838 }
839
840 /* Clears all interrupts */
841 void t1_interrupts_clear(adapter_t* adapter)
842 {
843         unsigned int i;
844
845         t1_sge_intr_clear(adapter->sge);
846         t1_tp_intr_clear(adapter->tp);
847         if (adapter->espi)
848                 t1_espi_intr_clear(adapter->espi);
849
850         /* Clear MAC/PHY interrupts for each port. */
851         for_each_port(adapter, i) {
852                 adapter->port[i].mac->ops->interrupt_clear(adapter->port[i].mac);
853                 adapter->port[i].phy->ops->interrupt_clear(adapter->port[i].phy);
854         }
855
856         /* Enable interrupts for external devices. */
857         if (t1_is_asic(adapter)) {
858                 u32 pl_intr = readl(adapter->regs + A_PL_CAUSE);
859
860                 writel(pl_intr | F_PL_INTR_EXT | F_PL_INTR_PCIX,
861                        adapter->regs + A_PL_CAUSE);
862         }
863
864         /* PCI-X interrupts */
865         pci_write_config_dword(adapter->pdev, A_PCICFG_INTR_CAUSE, 0xffffffff);
866 }
867
868 /*
869  * Slow path interrupt handler for ASICs.
870  */
871 static int asic_slow_intr(adapter_t *adapter)
872 {
873         u32 cause = readl(adapter->regs + A_PL_CAUSE);
874
875         cause &= adapter->slow_intr_mask;
876         if (!cause)
877                 return 0;
878         if (cause & F_PL_INTR_SGE_ERR)
879                 t1_sge_intr_error_handler(adapter->sge);
880         if (cause & F_PL_INTR_TP)
881                 t1_tp_intr_handler(adapter->tp);
882         if (cause & F_PL_INTR_ESPI)
883                 t1_espi_intr_handler(adapter->espi);
884         if (cause & F_PL_INTR_PCIX)
885                 t1_pci_intr_handler(adapter);
886         if (cause & F_PL_INTR_EXT)
887                 t1_elmer0_ext_intr(adapter);
888
889         /* Clear the interrupts just processed. */
890         writel(cause, adapter->regs + A_PL_CAUSE);
891         readl(adapter->regs + A_PL_CAUSE); /* flush writes */
892         return 1;
893 }
894
895 int t1_slow_intr_handler(adapter_t *adapter)
896 {
897 #ifdef CONFIG_CHELSIO_T1_1G
898         if (!t1_is_asic(adapter))
899                 return fpga_slow_intr(adapter);
900 #endif
901         return asic_slow_intr(adapter);
902 }
903
904 /* Power sequencing is a work-around for Intel's XPAKs. */
905 static void power_sequence_xpak(adapter_t* adapter)
906 {
907         u32 mod_detect;
908         u32 gpo;
909
910         /* Check for XPAK */
911         t1_tpi_read(adapter, A_ELMER0_GPI_STAT, &mod_detect);
912         if (!(ELMER0_GP_BIT5 & mod_detect)) {
913                 /* XPAK is present */
914                 t1_tpi_read(adapter, A_ELMER0_GPO, &gpo);
915                 gpo |= ELMER0_GP_BIT18;
916                 t1_tpi_write(adapter, A_ELMER0_GPO, gpo);
917         }
918 }
919
920 int __devinit t1_get_board_rev(adapter_t *adapter, const struct board_info *bi,
921                                struct adapter_params *p)
922 {
923         p->chip_version = bi->chip_term;
924         p->is_asic = (p->chip_version != CHBT_TERM_FPGA);
925         if (p->chip_version == CHBT_TERM_T1 ||
926             p->chip_version == CHBT_TERM_T2 ||
927             p->chip_version == CHBT_TERM_FPGA) {
928                 u32 val = readl(adapter->regs + A_TP_PC_CONFIG);
929
930                 val = G_TP_PC_REV(val);
931                 if (val == 2)
932                         p->chip_revision = TERM_T1B;
933                 else if (val == 3)
934                         p->chip_revision = TERM_T2;
935                 else
936                         return -1;
937         } else
938                 return -1;
939         return 0;
940 }
941
942 /*
943  * Enable board components other than the Chelsio chip, such as external MAC
944  * and PHY.
945  */
946 static int board_init(adapter_t *adapter, const struct board_info *bi)
947 {
948         switch (bi->board) {
949         case CHBT_BOARD_8000:
950         case CHBT_BOARD_N110:
951         case CHBT_BOARD_N210:
952         case CHBT_BOARD_CHT210:
953         case CHBT_BOARD_COUGAR:
954                 t1_tpi_par(adapter, 0xf);
955                 t1_tpi_write(adapter, A_ELMER0_GPO, 0x800);
956                 break;
957         case CHBT_BOARD_CHT110:
958                 t1_tpi_par(adapter, 0xf);
959                 t1_tpi_write(adapter, A_ELMER0_GPO, 0x1800);
960
961                 /* TBD XXX Might not need.  This fixes a problem
962                  *         described in the Intel SR XPAK errata.
963                  */
964                 power_sequence_xpak(adapter);
965                 break;
966 #ifdef CONFIG_CHELSIO_T1_1G
967         case CHBT_BOARD_CHT204E:
968                 /* add config space write here */
969         case CHBT_BOARD_CHT204:
970         case CHBT_BOARD_CHT204V:
971         case CHBT_BOARD_CHN204:
972                 t1_tpi_par(adapter, 0xf);
973                 t1_tpi_write(adapter, A_ELMER0_GPO, 0x804);
974                 break;
975         case CHBT_BOARD_CHT101:
976         case CHBT_BOARD_7500:
977                 t1_tpi_par(adapter, 0xf);
978                 t1_tpi_write(adapter, A_ELMER0_GPO, 0x1804);
979                 break;
980 #endif
981         }
982         return 0;
983 }
984
985 /*
986  * Initialize and configure the Terminator HW modules.  Note that external
987  * MAC and PHYs are initialized separately.
988  */
989 int t1_init_hw_modules(adapter_t *adapter)
990 {
991         int err = -EIO;
992         const struct board_info *bi = board_info(adapter);
993
994         if (!bi->clock_mc4) {
995                 u32 val = readl(adapter->regs + A_MC4_CFG);
996
997                 writel(val | F_READY | F_MC4_SLOW, adapter->regs + A_MC4_CFG);
998                 writel(F_M_BUS_ENABLE | F_TCAM_RESET,
999                        adapter->regs + A_MC5_CONFIG);
1000         }
1001
1002 #ifdef CONFIG_CHELSIO_T1_COUGAR
1003         if (adapter->cspi && t1_cspi_init(adapter->cspi))
1004                 goto out_err;
1005 #endif
1006         if (adapter->espi && t1_espi_init(adapter->espi, bi->chip_mac,
1007                                           bi->espi_nports))
1008                 goto out_err;
1009
1010         if (t1_tp_reset(adapter->tp, &adapter->params.tp, bi->clock_core))
1011                 goto out_err;
1012
1013         err = t1_sge_configure(adapter->sge, &adapter->params.sge);
1014         if (err)
1015                 goto out_err;
1016
1017         err = 0;
1018 out_err:
1019         return err;
1020 }
1021
1022 /*
1023  * Determine a card's PCI mode.
1024  */
1025 static void __devinit get_pci_mode(adapter_t *adapter, struct chelsio_pci_params *p)
1026 {
1027         static const unsigned short speed_map[] = { 33, 66, 100, 133 };
1028         u32 pci_mode;
1029
1030         pci_read_config_dword(adapter->pdev, A_PCICFG_MODE, &pci_mode);
1031         p->speed = speed_map[G_PCI_MODE_CLK(pci_mode)];
1032         p->width = (pci_mode & F_PCI_MODE_64BIT) ? 64 : 32;
1033         p->is_pcix = (pci_mode & F_PCI_MODE_PCIX) != 0;
1034 }
1035
1036 /*
1037  * Release the structures holding the SW per-Terminator-HW-module state.
1038  */
1039 void t1_free_sw_modules(adapter_t *adapter)
1040 {
1041         unsigned int i;
1042
1043         for_each_port(adapter, i) {
1044                 struct cmac *mac = adapter->port[i].mac;
1045                 struct cphy *phy = adapter->port[i].phy;
1046
1047                 if (mac)
1048                         mac->ops->destroy(mac);
1049                 if (phy)
1050                         phy->ops->destroy(phy);
1051         }
1052
1053         if (adapter->sge)
1054                 t1_sge_destroy(adapter->sge);
1055         if (adapter->tp)
1056                 t1_tp_destroy(adapter->tp);
1057         if (adapter->espi)
1058                 t1_espi_destroy(adapter->espi);
1059 #ifdef CONFIG_CHELSIO_T1_COUGAR
1060         if (adapter->cspi)
1061                 t1_cspi_destroy(adapter->cspi);
1062 #endif
1063 }
1064
1065 static void __devinit init_link_config(struct link_config *lc,
1066                                        const struct board_info *bi)
1067 {
1068         lc->supported = bi->caps;
1069         lc->requested_speed = lc->speed = SPEED_INVALID;
1070         lc->requested_duplex = lc->duplex = DUPLEX_INVALID;
1071         lc->requested_fc = lc->fc = PAUSE_RX | PAUSE_TX;
1072         if (lc->supported & SUPPORTED_Autoneg) {
1073                 lc->advertising = lc->supported;
1074                 lc->autoneg = AUTONEG_ENABLE;
1075                 lc->requested_fc |= PAUSE_AUTONEG;
1076         } else {
1077                 lc->advertising = 0;
1078                 lc->autoneg = AUTONEG_DISABLE;
1079         }
1080 }
1081
1082 #ifdef CONFIG_CHELSIO_T1_COUGAR
1083         if (bi->clock_cspi && !(adapter->cspi = t1_cspi_create(adapter))) {
1084                 CH_ERR("%s: CSPI initialization failed\n",
1085                        adapter->name);
1086                 goto error;
1087         }
1088 #endif
1089
1090 /*
1091  * Allocate and initialize the data structures that hold the SW state of
1092  * the Terminator HW modules.
1093  */
1094 int __devinit t1_init_sw_modules(adapter_t *adapter,
1095                                  const struct board_info *bi)
1096 {
1097         unsigned int i;
1098
1099         adapter->params.brd_info = bi;
1100         adapter->params.nports = bi->port_number;
1101         adapter->params.stats_update_period = bi->gmac->stats_update_period;
1102
1103         adapter->sge = t1_sge_create(adapter, &adapter->params.sge);
1104         if (!adapter->sge) {
1105                 CH_ERR("%s: SGE initialization failed\n",
1106                        adapter->name);
1107                 goto error;
1108         }
1109
1110         if (bi->espi_nports && !(adapter->espi = t1_espi_create(adapter))) {
1111                 CH_ERR("%s: ESPI initialization failed\n",
1112                        adapter->name);
1113                 goto error;
1114         }
1115
1116         adapter->tp = t1_tp_create(adapter, &adapter->params.tp);
1117         if (!adapter->tp) {
1118                 CH_ERR("%s: TP initialization failed\n",
1119                        adapter->name);
1120                 goto error;
1121         }
1122
1123         board_init(adapter, bi);
1124         bi->mdio_ops->init(adapter, bi);
1125         if (bi->gphy->reset)
1126                 bi->gphy->reset(adapter);
1127         if (bi->gmac->reset)
1128                 bi->gmac->reset(adapter);
1129
1130         for_each_port(adapter, i) {
1131                 u8 hw_addr[6];
1132                 struct cmac *mac;
1133                 int phy_addr = bi->mdio_phybaseaddr + i;
1134
1135                 adapter->port[i].phy = bi->gphy->create(adapter, phy_addr,
1136                                                         bi->mdio_ops);
1137                 if (!adapter->port[i].phy) {
1138                         CH_ERR("%s: PHY %d initialization failed\n",
1139                                adapter->name, i);
1140                         goto error;
1141                 }
1142
1143                 adapter->port[i].mac = mac = bi->gmac->create(adapter, i);
1144                 if (!mac) {
1145                         CH_ERR("%s: MAC %d initialization failed\n",
1146                                adapter->name, i);
1147                         goto error;
1148                 }
1149
1150                 /*
1151                  * Get the port's MAC addresses either from the EEPROM if one
1152                  * exists or the one hardcoded in the MAC.
1153                  */
1154                 if (!t1_is_asic(adapter) || bi->chip_mac == CHBT_MAC_DUMMY)
1155                         mac->ops->macaddress_get(mac, hw_addr);
1156                 else if (vpd_macaddress_get(adapter, i, hw_addr)) {
1157                         CH_ERR("%s: could not read MAC address from VPD ROM\n",
1158                                adapter->port[i].dev->name);
1159                         goto error;
1160                 }
1161                 memcpy(adapter->port[i].dev->dev_addr, hw_addr, ETH_ALEN);
1162                 init_link_config(&adapter->port[i].link_config, bi);
1163         }
1164
1165         get_pci_mode(adapter, &adapter->params.pci);
1166         t1_interrupts_clear(adapter);
1167         return 0;
1168
1169 error:
1170         t1_free_sw_modules(adapter);
1171         return -1;
1172 }