[PATCH] oss: remove deprecated PM interface from opl3sa2 driver
[linux-2.6] / sound / oss / rme96xx.c
1 /* (C) 2000 Guenter Geiger <geiger@debian.org>
2    with copy/pastes from the driver of Winfried Ritsch <ritsch@iem.kug.ac.at>
3    based on es1370.c
4
5
6
7    *  10 Jan 2001: 0.1 initial version
8    *  19 Jan 2001: 0.2 fixed bug in select()
9    *  27 Apr 2001: 0.3 more than one card usable
10    *  11 May 2001: 0.4 fixed for SMP, included into kernel source tree
11    *  17 May 2001: 0.5 draining code didn't work on new cards
12    *  18 May 2001: 0.6 remove synchronize_irq() call 
13    *  17 Jul 2001: 0.7 updated xrmectrl to make it work for newer cards
14    *   2 feb 2002: 0.8 fixed pci device handling, see below for patches from Heiko (Thanks!)
15                        Marcus Meissner <Marcus.Meissner@caldera.de>
16
17                        Modifications - Heiko Purnhagen <purnhage@tnt.uni-hannover.de>
18                        HP20020108 fixed handling of "large" read()
19                        HP20020116 towards REV 1.5 support, based on ALSA's card-rme9652.c
20                        HP20020118 made mixer ioctl and handling of devices>1 more safe
21                        HP20020201 fixed handling of "large" read() properly
22                        added REV 1.5 S/P-DIF receiver support
23                        SNDCTL_DSP_SPEED now returns the actual speed
24    *  10 Aug 2002: added synchronize_irq() again
25
26 TODO:
27    - test more than one card --- done
28    - check for pci IOREGION (see es1370) in rme96xx_probe ??
29    - error detection
30    - mmap interface
31    - mixer mmap interface
32    - mixer ioctl
33    - get rid of noise upon first open (why ??)
34    - allow multiple open (at least for read)
35    - allow multiple open for non overlapping regions
36    - recheck the multiple devices part (offsets of different devices, etc)
37    - do decent draining in _release --- done
38    - SMP support
39    - what about using fragstotal>2 for small fragsize? (HP20020118)
40    - add support for AFMT_S32_LE
41 */
42
43 #ifndef RMEVERSION
44 #define RMEVERSION "0.8"
45 #endif
46
47 #include <linux/module.h>
48 #include <linux/string.h>
49 #include <linux/sched.h>
50 #include <linux/sound.h>
51 #include <linux/soundcard.h>
52 #include <linux/pci.h>
53 #include <linux/smp_lock.h>
54 #include <linux/delay.h>
55 #include <linux/slab.h>
56 #include <linux/interrupt.h>
57 #include <linux/init.h>
58 #include <linux/interrupt.h>
59 #include <linux/poll.h>
60 #include <linux/wait.h>
61
62 #include <asm/dma.h>
63 #include <asm/page.h>
64
65 #include "rme96xx.h"
66
67 #define NR_DEVICE 2
68
69 static int devices = 1;
70 module_param(devices, int, 0);
71 MODULE_PARM_DESC(devices, "number of dsp devices allocated by the driver");
72
73
74 MODULE_AUTHOR("Guenter Geiger, geiger@debian.org");
75 MODULE_DESCRIPTION("RME9652/36 \"Hammerfall\" Driver");
76 MODULE_LICENSE("GPL");
77
78
79 #ifdef DEBUG
80 #define DBG(x) printk("RME_DEBUG:");x
81 #define COMM(x) printk("RME_COMM: " x "\n");
82 #else
83 #define DBG(x) while (0) {}
84 #define COMM(x)
85 #endif
86
87 /*-------------------------------------------------------------------------- 
88                         Preporcessor Macros and Definitions
89  --------------------------------------------------------------------------*/
90
91 #define RME96xx_MAGIC 0x6473
92
93 /* Registers-Space in offsets from base address with 16MByte size */
94
95 #define RME96xx_IO_EXTENT     16l*1024l*1024l
96 #define RME96xx_CHANNELS_PER_CARD 26
97
98 /*                  Write - Register */
99
100 /* 0,4,8,12,16,20,24,28 ... hardware init (erasing fifo-pointer intern) */
101 #define RME96xx_num_of_init_regs   8
102
103 #define RME96xx_init_buffer       (0/4)
104 #define RME96xx_play_buffer       (32/4)  /* pointer to 26x64kBit RAM from mainboard */
105 #define RME96xx_rec_buffer        (36/4)  /* pointer to 26x64kBit RAM from mainboard */
106 #define RME96xx_control_register  (64/4)  /* exact meaning see below */
107 #define RME96xx_irq_clear         (96/4)  /* irq acknowledge */
108 #define RME96xx_time_code         (100/4) /* if used with alesis adat */
109 #define RME96xx_thru_base         (128/4) /* 132...228 Thru for 26 channels */
110 #define RME96xx_thru_channels     RME96xx_CHANNELS_PER_CARD
111
112 /*                     Read Register */
113
114 #define RME96xx_status_register    0     /* meaning see below */
115
116
117
118 /* Status Register: */
119 /* ------------------------------------------------------------------------ */
120 #define RME96xx_IRQ          0x0000001 /* IRQ is High if not reset by RMExx_irq_clear */
121 #define RME96xx_lock_2       0x0000002 /* ADAT 3-PLL: 1=locked, 0=unlocked */
122 #define RME96xx_lock_1       0x0000004 /* ADAT 2-PLL: 1=locked, 0=unlocked */
123 #define RME96xx_lock_0       0x0000008 /* ADAT 1-PLL: 1=locked, 0=unlocked */
124
125 #define RME96xx_fs48         0x0000010 /* sample rate 0 ...44.1/88.2,  1 ... 48/96 Khz */
126 #define RME96xx_wsel_rd      0x0000020 /* if Word-Clock is used and valid then 1 */
127 #define RME96xx_buf_pos1     0x0000040 /* Bit 6..15 : Position of buffer-pointer in 64Bytes-blocks */
128 #define RME96xx_buf_pos2     0x0000080 /* resolution +/- 1 64Byte/block (since 64Bytes bursts) */
129  
130 #define RME96xx_buf_pos3     0x0000100 /* 10 bits = 1024 values */
131 #define RME96xx_buf_pos4     0x0000200 /* if we mask off the first 6 bits, we can take the status */
132 #define RME96xx_buf_pos5     0x0000400 /* register as sample counter in the hardware buffer */
133 #define RME96xx_buf_pos6     0x0000800 
134
135 #define RME96xx_buf_pos7     0x0001000 
136 #define RME96xx_buf_pos8     0x0002000 
137 #define RME96xx_buf_pos9     0x0004000
138 #define RME96xx_buf_pos10    0x0008000 
139
140 #define RME96xx_sync_2       0x0010000 /* if ADAT-IN3 synced to system clock */
141 #define RME96xx_sync_1       0x0020000 /* if ADAT-IN2 synced to system clock */
142 #define RME96xx_sync_0       0x0040000 /* if ADAT-IN1 synced to system clock */
143 #define RME96xx_DS_rd        0x0080000 /* 1=Double Speed, 0=Normal Speed */
144
145 #define RME96xx_tc_busy      0x0100000 /* 1=time-code copy in progress (960ms) */
146 #define RME96xx_tc_out       0x0200000 /* time-code out bit */
147 #define RME96xx_F_0          0x0400000 /*  000=64kHz, 100=88.2kHz, 011=96kHz  */
148 #define RME96xx_F_1          0x0800000 /*  111=32kHz, 110=44.1kHz, 101=48kHz, */
149
150 #define RME96xx_F_2          0x1000000 /*  001=Rev 1.5+ external Crystal Chip */
151 #define RME96xx_ERF          0x2000000 /* Error-Flag of SDPIF Receiver (1=No Lock)*/
152 #define RME96xx_buffer_id    0x4000000 /* toggles by each interrupt on rec/play */
153 #define RME96xx_tc_valid     0x8000000 /* 1 = a signal is detected on time-code input */
154 #define RME96xx_SPDIF_READ  0x10000000 /* byte available from Rev 1.5+ SPDIF interface */
155
156 /* Status Register Fields */
157
158 #define RME96xx_lock            (RME96xx_lock_0|RME96xx_lock_1|RME96xx_lock_2)
159 #define RME96xx_sync            (RME96xx_sync_0|RME96xx_sync_1|RME96xx_sync_2)
160 #define RME96xx_F               (RME96xx_F_0|RME96xx_F_1|RME96xx_F_2)
161 #define rme96xx_decode_spdif_rate(x) ((x)>>22)
162
163 /* Bit 6..15 : h/w buffer pointer */
164 #define RME96xx_buf_pos          0x000FFC0 
165 /* Bits 31,30,29 are bits 5,4,3 of h/w pointer position on later
166    Rev G EEPROMS and Rev 1.5 cards or later.
167 */ 
168 #define RME96xx_REV15_buf_pos(x) ((((x)&0xE0000000)>>26)|((x)&RME96xx_buf_pos))
169
170
171 /* Control-Register: */                     
172 /*--------------------------------------------------------------------------------*/
173
174 #define RME96xx_start_bit       0x0001 /* start record/play */
175 #define RME96xx_latency0        0x0002 /* Buffer size / latency */
176 #define RME96xx_latency1        0x0004 /*   buffersize = 512Bytes * 2^n */
177 #define RME96xx_latency2        0x0008 /*   0=64samples ... 7=8192samples */
178
179 #define RME96xx_Master          0x0010 /* Clock Mode 1=Master, 0=Slave/Auto */
180 #define RME96xx_IE              0x0020 /* Interupt Enable */
181 #define RME96xx_freq            0x0040 /* samplerate 0=44.1/88.2, 1=48/96 kHz*/
182 #define RME96xx_freq1           0x0080 /* samplerate 0=32 kHz, 1=other rates ??? (from ALSA, but may be wrong) */
183 #define RME96xx_DS              0x0100 /* double speed 0=44.1/48, 1=88.2/96 Khz */
184 #define RME96xx_PRO             0x0200 /* SPDIF-OUT 0=consumer, 1=professional */
185 #define RME96xx_EMP             0x0400 /* SPDIF-OUT emphasis 0=off, 1=on */
186 #define RME96xx_Dolby           0x0800 /* SPDIF-OUT non-audio bit 1=set, 0=unset */
187
188 #define RME96xx_opt_out         0x1000 /* use 1st optical OUT as SPDIF: 1=yes, 0=no */
189 #define RME96xx_wsel            0x2000 /* use Wordclock as sync (overwrites master) */
190 #define RME96xx_inp_0           0x4000 /* SPDIF-IN 00=optical (ADAT1), */
191 #define RME96xx_inp_1           0x8000 /* 01=coaxial (Cinch), 10=internal CDROM */
192
193 #define RME96xx_SyncRef0       0x10000 /* preferred sync-source in autosync */
194 #define RME96xx_SyncRef1       0x20000 /* 00=ADAT1, 01=ADAT2, 10=ADAT3, 11=SPDIF */
195
196 #define RME96xx_SPDIF_RESET    (1<<18) /* Rev 1.5+: h/w SPDIF receiver */
197 #define RME96xx_SPDIF_SELECT   (1<<19)
198 #define RME96xx_SPDIF_CLOCK    (1<<20)
199 #define RME96xx_SPDIF_WRITE    (1<<21)
200 #define RME96xx_ADAT1_INTERNAL (1<<22) /* Rev 1.5+: if set, internal CD connector carries ADAT */
201
202
203 #define RME96xx_ctrl_init            (RME96xx_latency0 |\
204                                      RME96xx_Master |\
205                                      RME96xx_inp_1)
206                               
207
208
209 /* Control register fields and shortcuts */
210
211 #define RME96xx_latency (RME96xx_latency0|RME96xx_latency1|RME96xx_latency2)
212 #define RME96xx_inp         (RME96xx_inp_0|RME96xx_inp_1)
213 #define RME96xx_SyncRef    (RME96xx_SyncRef0|RME96xx_SyncRef1)
214 #define RME96xx_mixer_allowed (RME96xx_Master|RME96xx_PRO|RME96xx_EMP|RME96xx_Dolby|RME96xx_opt_out|RME96xx_wsel|RME96xx_inp|RME96xx_SyncRef|RME96xx_ADAT1_INTERNAL)
215
216 /* latency = 512Bytes * 2^n, where n is made from Bit3 ... Bit1  (??? HP20020201) */
217
218 #define RME96xx_SET_LATENCY(x)   (((x)&0x7)<<1)
219 #define RME96xx_GET_LATENCY(x)   (((x)>>1)&0x7)
220 #define RME96xx_SET_inp(x) (((x)&0x3)<<14)
221 #define RME96xx_GET_inp(x)   (((x)>>14)&0x3)
222 #define RME96xx_SET_SyncRef(x) (((x)&0x3)<<17)
223 #define RME96xx_GET_SyncRef(x)   (((x)>>17)&0x3)
224
225
226 /* buffer sizes */
227 #define RME96xx_BYTES_PER_SAMPLE  4 /* sizeof(u32) */
228 #define RME_16K 16*1024
229
230 #define RME96xx_DMA_MAX_SAMPLES  (RME_16K)
231 #define RME96xx_DMA_MAX_SIZE     (RME_16K * RME96xx_BYTES_PER_SAMPLE)
232 #define RME96xx_DMA_MAX_SIZE_ALL (RME96xx_DMA_MAX_SIZE * RME96xx_CHANNELS_PER_CARD)
233
234 #define RME96xx_NUM_OF_FRAGMENTS     2
235 #define RME96xx_FRAGMENT_MAX_SIZE    (RME96xx_DMA_MAX_SIZE/2)
236 #define RME96xx_FRAGMENT_MAX_SAMPLES (RME96xx_DMA_MAX_SAMPLES/2)
237 #define RME96xx_MAX_LATENCY       7   /* 16k samples */
238
239
240 #define RME96xx_MAX_DEVS 4 /* we provide some OSS stereodevs */
241 #define RME96xx_MASK_DEVS 0x3 /* RME96xx_MAX_DEVS-1 */
242
243 #define RME_MESS "rme96xx:"
244 /*------------------------------------------------------------------------ 
245                   Types, struct and function declarations 
246  ------------------------------------------------------------------------*/
247
248
249 /* --------------------------------------------------------------------- */
250
251 static const char invalid_magic[] = KERN_CRIT RME_MESS" invalid magic value\n";
252
253 #define VALIDATE_STATE(s)                         \
254 ({                                                \
255         if (!(s) || (s)->magic != RME96xx_MAGIC) { \
256                 printk(invalid_magic);            \
257                 return -ENXIO;                    \
258         }                                         \
259 })
260
261 /* --------------------------------------------------------------------- */
262
263
264 static struct file_operations rme96xx_audio_fops;
265 static struct file_operations rme96xx_mixer_fops;
266 static int numcards;
267
268 typedef int32_t raw_sample_t;
269
270 typedef struct _rme96xx_info {
271
272         /* hardware settings */
273         int magic;
274         struct pci_dev * pcidev; /* pci_dev structure */
275         unsigned long __iomem *iobase;  
276         unsigned int irq;
277
278         /* list of rme96xx devices */
279         struct list_head devs;
280
281         spinlock_t lock;
282
283         u32 *recbuf;             /* memory for rec buffer */
284         u32 *playbuf;            /* memory for play buffer */
285
286         u32 control_register;
287
288         u32 thru_bits; /* thru 1=on, 0=off channel 1=Bit1... channel 26= Bit26 */
289
290         int hw_rev;             /* h/w rev * 10 (i.e. 1.5 has hw_rev = 15) */
291         char *card_name;        /* hammerfall or hammerfall light names */
292
293         int open_count;         /* unused ???   HP20020201 */
294
295         int rate;
296         int latency;
297         unsigned int fragsize;
298         int started;
299
300         int hwptr; /* can be negativ because of pci burst offset  */
301         unsigned int hwbufid;  /* set by interrupt, buffer which is written/read now */
302         
303         struct dmabuf {
304
305                 unsigned int format;
306                 int formatshift;
307                 int inchannels;       /* number of channels for device */
308                 int outchannels;       /* number of channels for device */
309                 int mono; /* if true, we play mono on 2 channels */
310                 int inoffset; /* which channel is considered the first one */
311                 int outoffset;
312                 
313                 /* state */
314                 int opened;               /* open() made */
315                 int started;              /* first write/read */
316                 int mmapped;              /* mmap */
317                 int open_mode;
318
319                 struct _rme96xx_info *s;  
320
321                 /* pointer to read/write position in buffer */
322                 unsigned readptr;          
323                 unsigned writeptr;          
324
325                 unsigned error; /* over/underruns cleared on sync again */
326
327                 /* waiting and locking */
328                 wait_queue_head_t wait;
329                 struct semaphore  open_sem;
330                 wait_queue_head_t open_wait;
331
332         } dma[RME96xx_MAX_DEVS]; 
333
334         int dspnum[RME96xx_MAX_DEVS];  /* register with sound subsystem */ 
335         int mixer;  /* register with sound subsystem */ 
336 } rme96xx_info;
337
338
339 /* fiddling with the card (first level hardware control) */
340
341 static inline void rme96xx_set_ctrl(rme96xx_info* s,int mask)
342 {
343
344         s->control_register|=mask;
345         writel(s->control_register,s->iobase + RME96xx_control_register);
346
347 }
348
349 static inline void rme96xx_unset_ctrl(rme96xx_info* s,int mask)
350 {
351
352         s->control_register&=(~mask);
353         writel(s->control_register,s->iobase + RME96xx_control_register);
354
355 }
356
357 static inline int rme96xx_get_sample_rate_status(rme96xx_info* s)
358 {
359         int val;
360         u32 status;
361         status = readl(s->iobase + RME96xx_status_register);
362         val = (status & RME96xx_fs48) ? 48000 : 44100;
363         if (status & RME96xx_DS_rd)
364                 val *= 2;
365         return val;
366 }
367
368 static inline int rme96xx_get_sample_rate_ctrl(rme96xx_info* s)
369 {
370         int val;
371         val = (s->control_register & RME96xx_freq) ? 48000 : 44100;
372         if (s->control_register & RME96xx_DS)
373                 val *= 2;
374         return val;
375 }
376
377
378 /* code from ALSA card-rme9652.c for rev 1.5 SPDIF receiver   HP 20020201 */
379
380 static void rme96xx_spdif_set_bit (rme96xx_info* s, int mask, int onoff)
381 {
382         if (onoff) 
383                 s->control_register |= mask;
384         else 
385                 s->control_register &= ~mask;
386                 
387         writel(s->control_register,s->iobase + RME96xx_control_register);
388 }
389
390 static void rme96xx_spdif_write_byte (rme96xx_info* s, const int val)
391 {
392         long mask;
393         long i;
394
395         for (i = 0, mask = 0x80; i < 8; i++, mask >>= 1) {
396                 if (val & mask)
397                         rme96xx_spdif_set_bit (s, RME96xx_SPDIF_WRITE, 1);
398                 else 
399                         rme96xx_spdif_set_bit (s, RME96xx_SPDIF_WRITE, 0);
400
401                 rme96xx_spdif_set_bit (s, RME96xx_SPDIF_CLOCK, 1);
402                 rme96xx_spdif_set_bit (s, RME96xx_SPDIF_CLOCK, 0);
403         }
404 }
405
406 static int rme96xx_spdif_read_byte (rme96xx_info* s)
407 {
408         long mask;
409         long val;
410         long i;
411
412         val = 0;
413
414         for (i = 0, mask = 0x80;  i < 8; i++, mask >>= 1) {
415                 rme96xx_spdif_set_bit (s, RME96xx_SPDIF_CLOCK, 1);
416                 if (readl(s->iobase + RME96xx_status_register) & RME96xx_SPDIF_READ)
417                         val |= mask;
418                 rme96xx_spdif_set_bit (s, RME96xx_SPDIF_CLOCK, 0);
419         }
420
421         return val;
422 }
423
424 static void rme96xx_write_spdif_codec (rme96xx_info* s, const int address, const int data)
425 {
426         rme96xx_spdif_set_bit (s, RME96xx_SPDIF_SELECT, 1);
427         rme96xx_spdif_write_byte (s, 0x20);
428         rme96xx_spdif_write_byte (s, address);
429         rme96xx_spdif_write_byte (s, data);
430         rme96xx_spdif_set_bit (s, RME96xx_SPDIF_SELECT, 0);
431 }
432
433
434 static int rme96xx_spdif_read_codec (rme96xx_info* s, const int address)
435 {
436         int ret;
437
438         rme96xx_spdif_set_bit (s, RME96xx_SPDIF_SELECT, 1);
439         rme96xx_spdif_write_byte (s, 0x20);
440         rme96xx_spdif_write_byte (s, address);
441         rme96xx_spdif_set_bit (s, RME96xx_SPDIF_SELECT, 0);
442         rme96xx_spdif_set_bit (s, RME96xx_SPDIF_SELECT, 1);
443
444         rme96xx_spdif_write_byte (s, 0x21);
445         ret = rme96xx_spdif_read_byte (s);
446         rme96xx_spdif_set_bit (s, RME96xx_SPDIF_SELECT, 0);
447
448         return ret;
449 }
450
451 static void rme96xx_initialize_spdif_receiver (rme96xx_info* s)
452 {
453         /* XXX what unsets this ? */
454         /* no idea ???   HP 20020201 */
455
456         s->control_register |= RME96xx_SPDIF_RESET;
457
458         rme96xx_write_spdif_codec (s, 4, 0x40);
459         rme96xx_write_spdif_codec (s, 17, 0x13);
460         rme96xx_write_spdif_codec (s, 6, 0x02);
461 }
462
463 static inline int rme96xx_spdif_sample_rate (rme96xx_info *s, int *spdifrate)
464 {
465         unsigned int rate_bits;
466
467         *spdifrate = 0x1;
468         if (readl(s->iobase + RME96xx_status_register) & RME96xx_ERF) {
469                 return -1;      /* error condition */
470         }
471         
472         if (s->hw_rev == 15) {
473
474                 int x, y, ret;
475                 
476                 x = rme96xx_spdif_read_codec (s, 30);
477
478                 if (x != 0) 
479                         y = 48000 * 64 / x;
480                 else
481                         y = 0;
482
483                 if      (y > 30400 && y < 33600)  {ret = 32000; *spdifrate = 0x7;}
484                 else if (y > 41900 && y < 46000)  {ret = 44100; *spdifrate = 0x6;}
485                 else if (y > 46000 && y < 50400)  {ret = 48000; *spdifrate = 0x5;}
486                 else if (y > 60800 && y < 67200)  {ret = 64000; *spdifrate = 0x0;}
487                 else if (y > 83700 && y < 92000)  {ret = 88200; *spdifrate = 0x4;}
488                 else if (y > 92000 && y < 100000) {ret = 96000; *spdifrate = 0x3;}
489                 else                              {ret = 0; *spdifrate = 0x1;}
490                 return ret;
491         }
492
493         rate_bits = readl(s->iobase + RME96xx_status_register) & RME96xx_F;
494
495         switch (*spdifrate = rme96xx_decode_spdif_rate(rate_bits)) {
496         case 0x7:
497                 return 32000;
498                 break;
499
500         case 0x6:
501                 return 44100;
502                 break;
503
504         case 0x5:
505                 return 48000;
506                 break;
507
508         case 0x4:
509                 return 88200;
510                 break;
511
512         case 0x3:
513                 return 96000;
514                 break;
515
516         case 0x0:
517                 return 64000;
518                 break;
519
520         default:
521                 /* was an ALSA warning ...
522                   snd_printk("%s: unknown S/PDIF input rate (bits = 0x%x)\n",
523                   s->card_name, rate_bits);
524                 */
525                 return 0;
526                 break;
527         }
528 }
529
530 /* end of code from ALSA card-rme9652.c */
531
532
533
534 /* the hwbuf in the status register seems to have some jitter, to get rid of
535    it, we first only let the numbers grow, to be on the secure side we 
536    subtract a certain amount RME96xx_BURSTBYTES from the resulting number */
537
538 /* the function returns the hardware pointer in bytes */
539 #define RME96xx_BURSTBYTES -64  /* bytes by which hwptr could be off */
540
541 static inline int rme96xx_gethwptr(rme96xx_info* s,int exact)
542 {
543         unsigned long flags;
544         if (exact) {
545                 unsigned int hwp;
546 /* the hwptr seems to be rather unreliable :(, so we don't use it */
547                 spin_lock_irqsave(&s->lock,flags);
548                 
549                 hwp  = readl(s->iobase + RME96xx_status_register) & 0xffc0;
550                 s->hwptr = (hwp < s->hwptr) ? s->hwptr : hwp;
551 //              s->hwptr = hwp;
552
553                 spin_unlock_irqrestore(&s->lock,flags);
554                 return (s->hwptr+RME96xx_BURSTBYTES) & ((s->fragsize<<1)-1);
555         }
556         return (s->hwbufid ? s->fragsize : 0);
557 }
558
559 static inline void rme96xx_setlatency(rme96xx_info* s,int l)
560 {
561         s->latency = l;
562         s->fragsize = 1<<(8+l);
563         rme96xx_unset_ctrl(s,RME96xx_latency);
564         rme96xx_set_ctrl(s,RME96xx_SET_LATENCY(l));     
565 }
566
567
568 static void rme96xx_clearbufs(struct dmabuf* dma)
569 {
570         int i,j;
571         unsigned long flags;
572
573         /* clear dmabufs */
574         for(i=0;i<devices;i++) {
575                 for (j=0;j<dma->outchannels + dma->mono;j++)
576                         memset(&dma->s->playbuf[(dma->outoffset + j)*RME96xx_DMA_MAX_SAMPLES], 
577                                0, RME96xx_DMA_MAX_SIZE);
578         }
579         spin_lock_irqsave(&dma->s->lock,flags);
580         dma->writeptr = 0;
581         dma->readptr = 0;
582         spin_unlock_irqrestore(&dma->s->lock,flags);
583 }
584
585 static int rme96xx_startcard(rme96xx_info *s,int stop)
586 {
587         int i;
588         unsigned long flags;
589
590         COMM       ("startcard");
591         if(s->control_register & RME96xx_IE){
592                 /* disable interrupt first */
593                 
594                 rme96xx_unset_ctrl( s,RME96xx_start_bit );
595                 udelay(10);
596                 rme96xx_unset_ctrl( s,RME96xx_IE);
597                 spin_lock_irqsave(&s->lock,flags); /* timing is critical */
598                 s->started = 0;
599                 spin_unlock_irqrestore(&s->lock,flags);
600                 if (stop) {
601                      COMM("Sound card stopped");
602                      return 1;
603                 }
604         }
605         COMM       ("interrupt disabled");
606         /* first initialize all pointers on card */
607         for(i=0;i<RME96xx_num_of_init_regs;i++){
608                 writel(0,s->iobase + i);
609                 udelay(10); /* ?? */
610         }
611         COMM       ("regs cleaned");
612
613         spin_lock_irqsave(&s->lock,flags); /* timing is critical */
614         udelay(10);
615         s->started = 1;
616         s->hwptr = 0;
617         spin_unlock_irqrestore(&s->lock,flags);
618
619         rme96xx_set_ctrl( s, RME96xx_IE | RME96xx_start_bit);
620
621
622         COMM("Sound card started");
623   
624         return 1;
625 }
626
627
628 static inline int rme96xx_getospace(struct dmabuf * dma, unsigned int hwp)
629 {
630         int cnt;
631         int  swptr;
632         unsigned long flags;
633
634         spin_lock_irqsave(&dma->s->lock,flags); 
635         swptr = dma->writeptr;
636         cnt = (hwp - swptr);
637         
638         if (cnt < 0) {
639              cnt = ((dma->s->fragsize<<1) - swptr);
640         }
641         spin_unlock_irqrestore(&dma->s->lock,flags);
642         return cnt;
643 }
644
645 static inline int rme96xx_getispace(struct dmabuf * dma, unsigned int hwp)
646 {
647         int cnt;
648         int  swptr;
649         unsigned long flags;
650
651         spin_lock_irqsave(&dma->s->lock,flags); 
652         swptr = dma->readptr;
653         cnt = (hwp - swptr);
654          
655         if (cnt < 0) {
656                 cnt = ((dma->s->fragsize<<1) - swptr);
657         }
658         spin_unlock_irqrestore(&dma->s->lock,flags);
659         return cnt;
660 }
661
662
663 static inline int rme96xx_copyfromuser(struct dmabuf* dma,const char __user * buffer,int count,int hop)
664 {
665         int swptr = dma->writeptr;
666         switch (dma->format) {
667         case AFMT_S32_BLOCKED:
668         {
669              char __user * buf = (char __user *)buffer;
670              int cnt = count/dma->outchannels;
671              int i;
672              for (i=0;i < dma->outchannels;i++) {
673                   char* hwbuf =(char*) &dma->s->playbuf[(dma->outoffset + i)*RME96xx_DMA_MAX_SAMPLES];
674                   hwbuf+=swptr;
675
676                   if (copy_from_user(hwbuf,buf, cnt))
677                        return -1;
678                   buf+=hop;
679              }
680              swptr+=cnt;
681              break;
682         }
683         case AFMT_S16_LE:
684         {
685              int i,j;
686              int cnt = count/dma->outchannels;
687              for (i=0;i < dma->outchannels + dma->mono;i++) {
688                      short __user * sbuf = (short __user *)buffer + i*(!dma->mono);
689                      short* hwbuf =(short*) &dma->s->playbuf[(dma->outoffset + i)*RME96xx_DMA_MAX_SAMPLES];          
690                      hwbuf+=(swptr>>1);
691                      for (j=0;j<(cnt>>1);j++) {
692                              hwbuf++; /* skip the low 16 bits */
693                              __get_user(*hwbuf++,sbuf++);
694                              sbuf+=(dma->outchannels-1);
695                      }
696              }
697              swptr += (cnt<<1);
698              break;
699         }
700         default:
701              printk(RME_MESS" unsupported format\n");
702              return -1;
703         } /* switch */
704
705         swptr&=((dma->s->fragsize<<1) -1);
706         dma->writeptr = swptr;
707
708         return 0;
709 }
710
711 /* The count argument is the number of bytes */
712 static inline int rme96xx_copytouser(struct dmabuf* dma,const char __user* buffer,int count,int hop)
713 {
714         int swptr = dma->readptr;
715         switch (dma->format) {
716         case AFMT_S32_BLOCKED:
717         {
718              char __user * buf = (char __user *)buffer;
719              int cnt = count/dma->inchannels;
720              int i;
721
722              for (i=0;i < dma->inchannels;i++) {
723                   char* hwbuf =(char*) &dma->s->recbuf[(dma->inoffset + i)*RME96xx_DMA_MAX_SAMPLES];
724                   hwbuf+=swptr;
725
726                   if (copy_to_user(buf,hwbuf,cnt))
727                        return -1;
728                   buf+=hop;
729              }
730              swptr+=cnt;
731              break;
732         }
733         case AFMT_S16_LE:
734         {
735              int i,j;
736              int cnt = count/dma->inchannels;
737              for (i=0;i < dma->inchannels;i++) {
738                   short __user * sbuf = (short __user *)buffer + i;
739                   short* hwbuf =(short*) &dma->s->recbuf[(dma->inoffset + i)*RME96xx_DMA_MAX_SAMPLES];       
740                   hwbuf+=(swptr>>1);
741                   for (j=0;j<(cnt>>1);j++) {
742                        hwbuf++;
743                        __put_user(*hwbuf++,sbuf++);
744                        sbuf+=(dma->inchannels-1);
745                   }
746              }
747              swptr += (cnt<<1);
748              break;
749         }
750         default:
751              printk(RME_MESS" unsupported format\n");
752              return -1;
753         } /* switch */
754         
755         swptr&=((dma->s->fragsize<<1) -1);      
756         dma->readptr = swptr;
757         return 0;
758 }
759
760
761 static irqreturn_t rme96xx_interrupt(int irq, void *dev_id, struct pt_regs *regs)
762 {
763         int i;
764         rme96xx_info *s = (rme96xx_info *)dev_id;
765         struct dmabuf *db;
766         u32 status;
767         unsigned long flags;
768
769         status = readl(s->iobase + RME96xx_status_register);
770         if (!(status & RME96xx_IRQ)) {
771                 return IRQ_NONE;
772         }
773
774         spin_lock_irqsave(&s->lock,flags);
775         writel(0,s->iobase + RME96xx_irq_clear);
776
777         s->hwbufid = (status & RME96xx_buffer_id)>>26;  
778         if ((status & 0xffc0) <= 256) s->hwptr = 0; 
779         for(i=0;i<devices;i++)
780         {
781                 db = &(s->dma[i]);
782                 if(db->started > 0)
783                         wake_up(&(db->wait));           
784         }  
785         spin_unlock_irqrestore(&s->lock,flags);
786         return IRQ_HANDLED;
787 }
788
789
790
791 /*---------------------------------------------------------------------------- 
792  PCI detection and module initialization stuff 
793  ----------------------------------------------------------------------------*/
794
795 static void* busmaster_malloc(int size) {
796      int pg; /* 2 s exponent of memory size */
797         char *buf;
798
799         DBG(printk("kernel malloc pages ..\n"));
800         
801         for (pg = 0; PAGE_SIZE * (1 << pg) < size; pg++);
802
803         buf = (char *) __get_free_pages(GFP_KERNEL | GFP_DMA, pg);
804
805         if (buf) {
806                 struct page* page, *last_page;
807
808                 page = virt_to_page(buf);
809                 last_page = page + (1 << pg);
810                 DBG(printk("setting reserved bit\n"));
811                 while (page < last_page) {
812                         SetPageReserved(page);
813                         page++;
814                 }
815                 return buf;
816         }
817         DBG(printk("allocated %ld",(long)buf));
818         return NULL;
819 }
820
821 static void busmaster_free(void* ptr,int size) {
822         int pg;
823         struct page* page, *last_page;
824
825         if (ptr == NULL)
826                 return;
827
828         for (pg = 0; PAGE_SIZE * (1 << pg) < size; pg++);
829
830         page = virt_to_page(ptr);
831         last_page = page + (1 << pg);
832         while (page < last_page) {
833                 ClearPageReserved(page);
834                 page++;
835         }
836         DBG(printk("freeing pages\n"));
837         free_pages((unsigned long) ptr, pg);
838         DBG(printk("done\n"));
839 }
840
841 /* initialize those parts of the info structure which are not pci detectable resources */
842
843 static int rme96xx_dmabuf_init(rme96xx_info * s,struct dmabuf* dma,int ioffset,int ooffset) {
844
845         init_MUTEX(&dma->open_sem);
846         init_waitqueue_head(&dma->open_wait);
847         init_waitqueue_head(&dma->wait);
848         dma->s = s; 
849         dma->error = 0;
850
851         dma->format = AFMT_S32_BLOCKED;
852         dma->formatshift = 0;
853         dma->inchannels = dma->outchannels = 1;
854         dma->inoffset = ioffset;
855         dma->outoffset = ooffset;
856
857         dma->opened=0;
858         dma->started=0;
859         dma->mmapped=0;
860         dma->open_mode=0;
861         dma->mono=0;
862
863         rme96xx_clearbufs(dma);
864         return 0;
865 }
866
867
868 static int rme96xx_init(rme96xx_info* s)
869 {
870         int i;
871         int status;
872         unsigned short rev;
873
874         DBG(printk("%s\n", __FUNCTION__));
875         numcards++;
876
877         s->magic = RME96xx_MAGIC; 
878
879         spin_lock_init(&s->lock);
880
881         COMM            ("setup busmaster memory")
882         s->recbuf = busmaster_malloc(RME96xx_DMA_MAX_SIZE_ALL);
883         s->playbuf = busmaster_malloc(RME96xx_DMA_MAX_SIZE_ALL);
884
885         if (!s->recbuf || !s->playbuf) {
886                 printk(KERN_ERR RME_MESS" Unable to allocate busmaster memory\n");
887                 return -ENODEV;
888         }
889
890         COMM            ("setting rec and playbuffers")
891
892         writel((u32) virt_to_bus(s->recbuf),s->iobase + RME96xx_rec_buffer);
893         writel((u32) virt_to_bus(s->playbuf),s->iobase + RME96xx_play_buffer);
894
895         COMM             ("initializing control register")
896         rme96xx_unset_ctrl(s,0xffffffff);
897         rme96xx_set_ctrl(s,RME96xx_ctrl_init);
898
899
900         COMM              ("setup devices")     
901         for (i=0;i < devices;i++) {
902                 struct dmabuf * dma = &s->dma[i];
903                 rme96xx_dmabuf_init(s,dma,2*i,2*i);
904         }
905
906         /* code from ALSA card-rme9652.c   HP 20020201 */
907         /* Determine the h/w rev level of the card. This seems like
908            a particularly kludgy way to encode it, but its what RME
909            chose to do, so we follow them ...
910         */
911
912         status = readl(s->iobase + RME96xx_status_register);
913         if (rme96xx_decode_spdif_rate(status&RME96xx_F) == 1) {
914                 s->hw_rev = 15;
915         } else {
916                 s->hw_rev = 11;
917         }
918
919         /* Differentiate between the standard Hammerfall, and the
920            "Light", which does not have the expansion board. This
921            method comes from information received from Mathhias
922            Clausen at RME. Display the EEPROM and h/w revID where
923            relevant.  
924         */
925
926         pci_read_config_word(s->pcidev, PCI_CLASS_REVISION, &rev);
927         switch (rev & 0xff) {
928         case 8: /* original eprom */
929                 if (s->hw_rev == 15) {
930                         s->card_name = "RME Digi9636 (Rev 1.5)";
931                 } else {
932                         s->card_name = "RME Digi9636";
933                 }
934                 break;
935         case 9: /* W36_G EPROM */
936                 s->card_name = "RME Digi9636 (Rev G)";
937                 break;
938         case 4: /* W52_G EPROM */
939                 s->card_name = "RME Digi9652 (Rev G)";
940                 break;
941         default:
942         case 3: /* original eprom */
943                 if (s->hw_rev == 15) {
944                         s->card_name = "RME Digi9652 (Rev 1.5)";
945                 } else {
946                         s->card_name = "RME Digi9652";
947                 }
948                 break;
949         }
950
951         printk(KERN_INFO RME_MESS" detected %s (hw_rev %d)\n",s->card_name,s->hw_rev); 
952
953         if (s->hw_rev == 15)
954                 rme96xx_initialize_spdif_receiver (s);
955
956         s->started = 0;
957         rme96xx_setlatency(s,7);
958
959         printk(KERN_INFO RME_MESS" card %d initialized\n",numcards); 
960         return 0;
961 }
962
963
964 /* open uses this to figure out which device was opened .. this seems to be 
965    unnecessary complex */
966
967 static LIST_HEAD(devs);
968
969 static int __devinit rme96xx_probe(struct pci_dev *pcidev, const struct pci_device_id *pciid)
970 {
971         int i;
972         rme96xx_info *s;
973
974         DBG(printk("%s\n", __FUNCTION__));
975         
976         if (pcidev->irq == 0) 
977                 return -1;
978         if (!pci_dma_supported(pcidev, 0xffffffff)) {
979                 printk(KERN_WARNING RME_MESS" architecture does not support 32bit PCI busmaster DMA\n");
980                 return -1;
981         }
982         if (!(s = kmalloc(sizeof(rme96xx_info), GFP_KERNEL))) {
983                 printk(KERN_WARNING RME_MESS" out of memory\n");
984                 return -1;
985         }
986         memset(s, 0, sizeof(rme96xx_info));
987
988         s->pcidev = pcidev;
989         s->iobase = ioremap(pci_resource_start(pcidev, 0),RME96xx_IO_EXTENT);
990         s->irq = pcidev->irq;
991
992         DBG(printk("remapped iobase: %lx irq %d\n",(long)s->iobase,s->irq));
993
994         if (pci_enable_device(pcidev))
995                 goto err_irq;
996         if (request_irq(s->irq, rme96xx_interrupt, SA_SHIRQ, "rme96xx", s)) {
997                 printk(KERN_ERR RME_MESS" irq %u in use\n", s->irq);
998                 goto err_irq;
999         }
1000         
1001         /* initialize the card */
1002
1003         i = 0;
1004         if (rme96xx_init(s) < 0) {
1005                 printk(KERN_ERR RME_MESS" initialization failed\n");
1006                 goto err_devices;
1007         }
1008         for (i=0;i<devices;i++) {
1009                 if ((s->dspnum[i] = register_sound_dsp(&rme96xx_audio_fops, -1)) < 0)
1010                         goto err_devices;
1011         }
1012
1013         if ((s->mixer = register_sound_mixer(&rme96xx_mixer_fops, -1)) < 0)
1014                 goto err_devices;
1015
1016         pci_set_drvdata(pcidev, s);
1017         pcidev->dma_mask = 0xffffffff; /* ????? */
1018         /* put it into driver list */
1019         list_add_tail(&s->devs, &devs);
1020
1021         DBG(printk("initialization successful\n"));
1022         return 0;
1023
1024         /* error handler */
1025  err_devices:
1026         while (i--) 
1027                 unregister_sound_dsp(s->dspnum[i]);
1028         free_irq(s->irq,s);
1029  err_irq:
1030         kfree(s);
1031         return -1;
1032 }
1033
1034
1035 static void __devexit rme96xx_remove(struct pci_dev *dev)
1036 {
1037         int i;
1038         rme96xx_info *s = pci_get_drvdata(dev);
1039
1040         if (!s) {
1041                 printk(KERN_ERR"device structure not valid\n");
1042                 return ;
1043         }
1044
1045         if (s->started) rme96xx_startcard(s,0);
1046
1047         i = devices;
1048         while (i) {
1049                 i--;
1050                 unregister_sound_dsp(s->dspnum[i]);
1051         }
1052         
1053         unregister_sound_mixer(s->mixer);
1054         synchronize_irq(s->irq);
1055         free_irq(s->irq,s);
1056         busmaster_free(s->recbuf,RME96xx_DMA_MAX_SIZE_ALL);
1057         busmaster_free(s->playbuf,RME96xx_DMA_MAX_SIZE_ALL);
1058         kfree(s);
1059         pci_set_drvdata(dev, NULL);
1060 }
1061
1062
1063 #ifndef PCI_VENDOR_ID_RME 
1064 #define PCI_VENDOR_ID_RME 0x10ee
1065 #endif
1066 #ifndef PCI_DEVICE_ID_RME9652
1067 #define PCI_DEVICE_ID_RME9652 0x3fc4
1068 #endif
1069 #ifndef PCI_ANY_ID
1070 #define PCI_ANY_ID 0
1071 #endif
1072
1073 static struct pci_device_id id_table[] = {
1074         {
1075                 .vendor    = PCI_VENDOR_ID_RME,
1076                 .device    = PCI_DEVICE_ID_RME9652,
1077                 .subvendor = PCI_ANY_ID,
1078                 .subdevice = PCI_ANY_ID,
1079         },
1080         { 0, },
1081 };
1082
1083 MODULE_DEVICE_TABLE(pci, id_table);
1084
1085 static struct pci_driver rme96xx_driver = {
1086         .name     =  "rme96xx",
1087         .id_table = id_table,
1088         .probe    = rme96xx_probe,
1089         .remove   = __devexit_p(rme96xx_remove),
1090 };
1091
1092 static int __init init_rme96xx(void)
1093 {
1094         printk(KERN_INFO RME_MESS" version "RMEVERSION" time " __TIME__ " " __DATE__ "\n");
1095         devices = ((devices-1) & RME96xx_MASK_DEVS) + 1;
1096         printk(KERN_INFO RME_MESS" reserving %d dsp device(s)\n",devices);
1097         numcards = 0;
1098         return pci_module_init(&rme96xx_driver);
1099 }
1100
1101 static void __exit cleanup_rme96xx(void)
1102 {
1103         printk(KERN_INFO RME_MESS" unloading\n");
1104         pci_unregister_driver(&rme96xx_driver);
1105 }
1106
1107 module_init(init_rme96xx);
1108 module_exit(cleanup_rme96xx);
1109
1110
1111
1112
1113
1114 /*-------------------------------------------------------------------------- 
1115    Implementation of file operations 
1116 ---------------------------------------------------------------------------*/
1117
1118 #define RME96xx_FMT (AFMT_S16_LE|AFMT_U8|AFMT_S32_BLOCKED)
1119 /* AFTM_U8 is not (yet?) supported ...  HP20020201 */
1120
1121 static int rme96xx_ioctl(struct inode *in, struct file *file, unsigned int cmd, unsigned long arg)
1122 {
1123         struct dmabuf * dma = (struct dmabuf *)file->private_data; 
1124         rme96xx_info *s = dma->s;
1125         unsigned long flags;
1126         audio_buf_info abinfo;
1127         count_info cinfo;
1128         int count;
1129         int val = 0;
1130         void __user *argp = (void __user *)arg;
1131         int __user *p = argp;
1132
1133         VALIDATE_STATE(s);
1134
1135         DBG(printk("ioctl %ud\n",cmd));
1136
1137         switch (cmd) {
1138         case OSS_GETVERSION:
1139                 return put_user(SOUND_VERSION, p);
1140
1141         case SNDCTL_DSP_SYNC:
1142 #if 0
1143                 if (file->f_mode & FMODE_WRITE)
1144                         return drain_dac2(s, 0/*file->f_flags & O_NONBLOCK*/);
1145 #endif
1146                 return 0;
1147                 
1148         case SNDCTL_DSP_SETDUPLEX:
1149                 return 0;
1150
1151         case SNDCTL_DSP_GETCAPS:
1152                 return put_user(DSP_CAP_DUPLEX | DSP_CAP_REALTIME | DSP_CAP_TRIGGER | DSP_CAP_MMAP, p);
1153                 
1154         case SNDCTL_DSP_RESET:
1155 //              rme96xx_clearbufs(dma);
1156                 return 0;
1157
1158         case SNDCTL_DSP_SPEED:
1159                 if (get_user(val, p))
1160                         return -EFAULT;
1161                 if (val >= 0) {
1162 /* generally it's not a problem if we change the speed 
1163                         if (dma->open_mode & (~file->f_mode) & (FMODE_READ|FMODE_WRITE))
1164                                 return -EINVAL;
1165 */
1166                         spin_lock_irqsave(&s->lock, flags);
1167
1168                         switch (val) {
1169                         case 44100:
1170                         case 88200:
1171                                 rme96xx_unset_ctrl(s,RME96xx_freq);
1172                                 break;
1173                         case 48000: 
1174                         case 96000: 
1175                                 rme96xx_set_ctrl(s,RME96xx_freq);
1176                                 break;
1177                         /* just report current rate as default
1178                            e.g. use 0 to "select" current digital input rate
1179                         default:
1180                                 rme96xx_unset_ctrl(s,RME96xx_freq);
1181                                 val = 44100;
1182                         */
1183                         }
1184                         if (val > 50000)
1185                                 rme96xx_set_ctrl(s,RME96xx_DS);
1186                         else
1187                                 rme96xx_unset_ctrl(s,RME96xx_DS);
1188                         /* set val to actual value  HP 20020201 */
1189                         /* NOTE: if not "Sync Master", reported rate might be not yet "updated" ... but I don't want to insert a long udelay() here */
1190                         if ((s->control_register & RME96xx_Master) && !(s->control_register & RME96xx_wsel))
1191                                 val = rme96xx_get_sample_rate_ctrl(s);
1192                         else
1193                                 val = rme96xx_get_sample_rate_status(s);
1194                         s->rate = val;
1195                         spin_unlock_irqrestore(&s->lock, flags);
1196                 }
1197                 DBG(printk("speed set to %d\n",val));
1198                 return put_user(val, p);
1199                 
1200         case SNDCTL_DSP_STEREO: /* this plays a mono file on two channels */
1201                 if (get_user(val, p))
1202                         return -EFAULT;
1203                 
1204                 if (!val) {
1205                         DBG(printk("setting to mono\n")); 
1206                         dma->mono=1; 
1207                         dma->inchannels = 1;
1208                         dma->outchannels = 1;
1209                 }
1210                 else {
1211                         DBG(printk("setting to stereo\n")); 
1212                         dma->mono = 0;
1213                         dma->inchannels = 2;
1214                         dma->outchannels = 2;
1215                 }
1216                 return 0;
1217         case SNDCTL_DSP_CHANNELS:
1218                 /* remember to check for resonable offset/channel pairs here */
1219                 if (get_user(val, p))
1220                         return -EFAULT;
1221
1222                 if (file->f_mode & FMODE_WRITE) {                       
1223                         if (val > 0 && (dma->outoffset + val) <= RME96xx_CHANNELS_PER_CARD) 
1224                                 dma->outchannels = val;
1225                         else
1226                                 dma->outchannels = val = 2;
1227                         DBG(printk("setting to outchannels %d\n",val)); 
1228                 }
1229                 if (file->f_mode & FMODE_READ) {
1230                         if (val > 0 && (dma->inoffset + val) <= RME96xx_CHANNELS_PER_CARD) 
1231                                 dma->inchannels = val;
1232                         else
1233                                 dma->inchannels = val = 2;
1234                         DBG(printk("setting to inchannels %d\n",val)); 
1235                 }
1236
1237                 dma->mono=0;
1238
1239                 return put_user(val, p);
1240                 
1241         case SNDCTL_DSP_GETFMTS: /* Returns a mask */
1242                 return put_user(RME96xx_FMT, p);
1243                 
1244         case SNDCTL_DSP_SETFMT: /* Selects ONE fmt*/
1245                 DBG(printk("setting to format %x\n",val)); 
1246                 if (get_user(val, p))
1247                         return -EFAULT;
1248                 if (val != AFMT_QUERY) {
1249                         if (val & RME96xx_FMT)
1250                                 dma->format = val;
1251                         switch (dma->format) {
1252                         case AFMT_S16_LE:
1253                                 dma->formatshift=1;
1254                                 break;
1255                         case AFMT_S32_BLOCKED:
1256                                 dma->formatshift=0;
1257                                 break;
1258                         }
1259                 }
1260                 return put_user(dma->format, p);
1261                 
1262         case SNDCTL_DSP_POST:
1263                 return 0;
1264
1265         case SNDCTL_DSP_GETTRIGGER:
1266                 val = 0;
1267 #if 0
1268                 if (file->f_mode & FMODE_READ && s->ctrl & CTRL_ADC_EN) 
1269                         val |= PCM_ENABLE_INPUT;
1270                 if (file->f_mode & FMODE_WRITE && s->ctrl & CTRL_DAC2_EN) 
1271                         val |= PCM_ENABLE_OUTPUT;
1272 #endif
1273                 return put_user(val, p);
1274                 
1275         case SNDCTL_DSP_SETTRIGGER:
1276                 if (get_user(val, p))
1277                         return -EFAULT;
1278 #if 0
1279                 if (file->f_mode & FMODE_READ) {
1280                         if (val & PCM_ENABLE_INPUT) {
1281                                 if (!s->dma_adc.ready && (ret = prog_dmabuf_adc(s)))
1282                                         return ret;
1283                                 start_adc(s);
1284                         } else
1285                                 stop_adc(s);
1286                 }
1287                 if (file->f_mode & FMODE_WRITE) {
1288                         if (val & PCM_ENABLE_OUTPUT) {
1289                                 if (!s->dma_dac2.ready && (ret = prog_dmabuf_dac2(s)))
1290                                         return ret;
1291                                 start_dac2(s);
1292                         } else
1293                                 stop_dac2(s);
1294                 }
1295 #endif
1296                 return 0;
1297
1298         case SNDCTL_DSP_GETOSPACE:
1299                 if (!(file->f_mode & FMODE_WRITE))
1300                         return -EINVAL;
1301
1302                 val = rme96xx_gethwptr(dma->s,0);
1303
1304
1305                 count = rme96xx_getospace(dma,val);
1306                 if (!s->started) count = s->fragsize*2;
1307                 abinfo.fragsize =(s->fragsize*dma->outchannels)>>dma->formatshift;
1308                 abinfo.bytes = (count*dma->outchannels)>>dma->formatshift;
1309                 abinfo.fragstotal = 2;
1310                 abinfo.fragments = (count > s->fragsize); 
1311
1312                 return copy_to_user(argp, &abinfo, sizeof(abinfo)) ? -EFAULT : 0;
1313
1314         case SNDCTL_DSP_GETISPACE:
1315                 if (!(file->f_mode & FMODE_READ))
1316                         return -EINVAL;
1317
1318                 val = rme96xx_gethwptr(dma->s,0);
1319
1320                 count = rme96xx_getispace(dma,val);
1321
1322                 abinfo.fragsize = (s->fragsize*dma->inchannels)>>dma->formatshift;
1323                 abinfo.bytes = (count*dma->inchannels)>>dma->formatshift;
1324                 abinfo.fragstotal = 2;
1325                 abinfo.fragments = count > s->fragsize; 
1326                 return copy_to_user(argp, &abinfo, sizeof(abinfo)) ? -EFAULT : 0;
1327                 
1328         case SNDCTL_DSP_NONBLOCK:
1329                 file->f_flags |= O_NONBLOCK;
1330                 return 0;
1331
1332         case SNDCTL_DSP_GETODELAY: /* What should this exactly do ? ,
1333                                       ATM it is just abinfo.bytes */
1334                 if (!(file->f_mode & FMODE_WRITE))
1335                         return -EINVAL;
1336
1337                 val = rme96xx_gethwptr(dma->s,0);
1338                 count = val - dma->readptr;
1339                 if (count < 0)
1340                         count += s->fragsize<<1;
1341
1342                 return put_user(count, p);
1343
1344
1345 /* check out how to use mmaped mode (can only be blocked !!!) */
1346         case SNDCTL_DSP_GETIPTR:
1347                 if (!(file->f_mode & FMODE_READ))
1348                         return -EINVAL;
1349                 val = rme96xx_gethwptr(dma->s,0);
1350                 spin_lock_irqsave(&s->lock,flags);
1351                 cinfo.bytes = s->fragsize<<1;
1352                 count = val - dma->readptr;
1353                 if (count < 0)
1354                         count += s->fragsize<<1;
1355
1356                 cinfo.blocks = (count > s->fragsize); 
1357                 cinfo.ptr = val;
1358                 if (dma->mmapped)
1359                         dma->readptr &= s->fragsize<<1;
1360                 spin_unlock_irqrestore(&s->lock,flags);
1361
1362                 if (copy_to_user(argp, &cinfo, sizeof(cinfo)))
1363                         return -EFAULT;
1364                 return 0;
1365
1366         case SNDCTL_DSP_GETOPTR:
1367                 if (!(file->f_mode & FMODE_READ))
1368                         return -EINVAL;
1369                 val = rme96xx_gethwptr(dma->s,0);
1370                 spin_lock_irqsave(&s->lock,flags);
1371                 cinfo.bytes = s->fragsize<<1;
1372                 count = val - dma->writeptr;
1373                 if (count < 0)
1374                         count += s->fragsize<<1;
1375
1376                 cinfo.blocks = (count > s->fragsize); 
1377                 cinfo.ptr = val;
1378                 if (dma->mmapped)
1379                         dma->writeptr &= s->fragsize<<1;
1380                 spin_unlock_irqrestore(&s->lock,flags);
1381                 if (copy_to_user(argp, &cinfo, sizeof(cinfo)))
1382                         return -EFAULT;
1383                 return 0;
1384         case SNDCTL_DSP_GETBLKSIZE:
1385              return put_user(s->fragsize, p);
1386
1387         case SNDCTL_DSP_SETFRAGMENT:
1388                 if (get_user(val, p))
1389                         return -EFAULT;
1390                 val&=0xffff;
1391                 val -= 7;
1392                 if (val < 0) val = 0;
1393                 if (val > 7) val = 7;
1394                 rme96xx_setlatency(s,val);
1395                 return 0;
1396
1397         case SNDCTL_DSP_SUBDIVIDE:
1398 #if 0
1399                 if ((file->f_mode & FMODE_READ && s->dma_adc.subdivision) ||
1400                     (file->f_mode & FMODE_WRITE && s->dma_dac2.subdivision))
1401                         return -EINVAL;
1402                 if (get_user(val, p))
1403                         return -EFAULT;
1404                 if (val != 1 && val != 2 && val != 4)
1405                         return -EINVAL;
1406                 if (file->f_mode & FMODE_READ)
1407                         s->dma_adc.subdivision = val;
1408                 if (file->f_mode & FMODE_WRITE)
1409                         s->dma_dac2.subdivision = val;
1410 #endif          
1411                 return 0;
1412
1413         case SOUND_PCM_READ_RATE:
1414                 /* HP20020201 */
1415                 s->rate = rme96xx_get_sample_rate_status(s);
1416                 return put_user(s->rate, p);
1417
1418         case SOUND_PCM_READ_CHANNELS:
1419                 return put_user(dma->outchannels, p);
1420
1421         case SOUND_PCM_READ_BITS:
1422                 switch (dma->format) {
1423                         case AFMT_S32_BLOCKED:
1424                                 val = 32;
1425                                 break;
1426                         case AFMT_S16_LE:
1427                                 val = 16;
1428                                 break;
1429                 }
1430                 return put_user(val, p);
1431
1432         case SOUND_PCM_WRITE_FILTER:
1433         case SNDCTL_DSP_SETSYNCRO:
1434         case SOUND_PCM_READ_FILTER:
1435                 return -EINVAL;
1436                 
1437         }
1438
1439
1440         return -ENODEV;
1441 }
1442
1443
1444
1445 static int rme96xx_open(struct inode *in, struct file *f)
1446 {
1447         int minor = iminor(in);
1448         struct list_head *list;
1449         int devnum;
1450         rme96xx_info *s;
1451         struct dmabuf* dma;
1452         DECLARE_WAITQUEUE(wait, current); 
1453
1454         DBG(printk("device num %d open\n",devnum));
1455
1456         nonseekable_open(in, f);
1457         for (list = devs.next; ; list = list->next) {
1458                 if (list == &devs)
1459                         return -ENODEV;
1460                 s = list_entry(list, rme96xx_info, devs);
1461                 for (devnum=0; devnum<devices; devnum++)
1462                         if (!((s->dspnum[devnum] ^ minor) & ~0xf)) 
1463                                 break;
1464                 if (devnum<devices)
1465                         break;
1466         }
1467         VALIDATE_STATE(s);
1468
1469         dma = &s->dma[devnum];
1470         f->private_data = dma;
1471         /* wait for device to become free */
1472         down(&dma->open_sem);
1473         while (dma->open_mode & f->f_mode) {
1474                 if (f->f_flags & O_NONBLOCK) {
1475                         up(&dma->open_sem);
1476                         return -EBUSY;
1477                 }
1478                 add_wait_queue(&dma->open_wait, &wait);
1479                 __set_current_state(TASK_INTERRUPTIBLE);
1480                 up(&dma->open_sem);
1481                 schedule();
1482                 remove_wait_queue(&dma->open_wait, &wait);
1483                 set_current_state(TASK_RUNNING);
1484                 if (signal_pending(current))
1485                         return -ERESTARTSYS;
1486                 down(&dma->open_sem);
1487         }
1488
1489         COMM                ("hardware open")
1490
1491         if (!dma->opened) rme96xx_dmabuf_init(dma->s,dma,dma->inoffset,dma->outoffset);
1492
1493         dma->open_mode |= (f->f_mode & (FMODE_READ | FMODE_WRITE));
1494         dma->opened = 1;
1495         up(&dma->open_sem);
1496
1497         DBG(printk("device num %d open finished\n",devnum));
1498         return 0;
1499 }
1500
1501 static int rme96xx_release(struct inode *in, struct file *file)
1502 {
1503         struct dmabuf * dma = (struct dmabuf*) file->private_data;
1504         /* int hwp;  ... was unused   HP20020201 */
1505         DBG(printk("%s\n", __FUNCTION__));
1506
1507         COMM          ("draining")
1508         if (dma->open_mode & FMODE_WRITE) {
1509 #if 0 /* Why doesn't this work with some cards ?? */
1510              hwp = rme96xx_gethwptr(dma->s,0);
1511              while (rme96xx_getospace(dma,hwp)) {
1512                   interruptible_sleep_on(&(dma->wait));
1513                   hwp = rme96xx_gethwptr(dma->s,0);
1514              }
1515 #endif
1516              rme96xx_clearbufs(dma);
1517         }
1518
1519         dma->open_mode &= (~file->f_mode) & (FMODE_READ|FMODE_WRITE);
1520
1521         if (!(dma->open_mode & (FMODE_READ|FMODE_WRITE))) {
1522              dma->opened = 0;
1523              if (dma->s->started) rme96xx_startcard(dma->s,1);
1524         }
1525
1526         wake_up(&dma->open_wait);
1527         up(&dma->open_sem);
1528
1529         return 0;
1530 }
1531
1532
1533 static ssize_t rme96xx_write(struct file *file, const char __user *buffer, size_t count, loff_t *ppos)
1534 {
1535         struct dmabuf *dma = (struct dmabuf *)file->private_data;
1536         ssize_t ret = 0;
1537         int cnt; /* number of bytes from "buffer" that will/can be used */
1538         int hop = count/dma->outchannels;
1539         int hwp;
1540         int exact = (file->f_flags & O_NONBLOCK); 
1541
1542
1543         if(dma == NULL || (dma->s) == NULL) 
1544                 return -ENXIO;
1545
1546         if (dma->mmapped || !dma->opened)
1547                 return -ENXIO;
1548
1549         if (!access_ok(VERIFY_READ, buffer, count))
1550                 return -EFAULT;
1551
1552         if (! (dma->open_mode  & FMODE_WRITE))
1553                 return -ENXIO;
1554
1555         if (!dma->s->started) rme96xx_startcard(dma->s,exact);
1556         hwp = rme96xx_gethwptr(dma->s,0);
1557
1558         if(!(dma->started)){             
1559                 COMM          ("first write")
1560                         
1561                 dma->readptr = hwp;
1562                 dma->writeptr = hwp;
1563                 dma->started = 1;
1564         }
1565
1566         while (count > 0) {
1567                 cnt = rme96xx_getospace(dma,hwp);               
1568                 cnt>>=dma->formatshift;
1569                 cnt*=dma->outchannels;
1570                 if (cnt > count)
1571                         cnt = count;
1572
1573                 if (cnt != 0) {
1574                         if (rme96xx_copyfromuser(dma,buffer,cnt,hop))
1575                                 return ret ? ret : -EFAULT;
1576                         count -= cnt;
1577                         buffer += cnt;
1578                         ret += cnt;
1579                         if (count == 0) return ret;
1580                 }
1581                 if (file->f_flags & O_NONBLOCK)
1582                         return ret ? ret : -EAGAIN;
1583                 
1584                 if ((hwp - dma->writeptr) <= 0) {
1585                         interruptible_sleep_on(&(dma->wait));
1586                         
1587                         if (signal_pending(current))
1588                                 return ret ? ret : -ERESTARTSYS;
1589                 }                       
1590
1591                 hwp = rme96xx_gethwptr(dma->s,exact);
1592
1593         }; /* count > 0 */
1594
1595         return ret;
1596 }
1597
1598 static ssize_t rme96xx_read(struct file *file, char __user *buffer, size_t count, loff_t *ppos)
1599
1600         struct dmabuf *dma = (struct dmabuf *)file->private_data;
1601         ssize_t ret = 0;
1602         int cnt; /* number of bytes from "buffer" that will/can be used */
1603         int hop = count/dma->inchannels;
1604         int hwp;
1605         int exact = (file->f_flags & O_NONBLOCK); 
1606
1607
1608         if(dma == NULL || (dma->s) == NULL) 
1609                 return -ENXIO;
1610
1611         if (dma->mmapped || !dma->opened)
1612                 return -ENXIO;
1613
1614         if (!access_ok(VERIFY_WRITE, buffer, count))
1615                 return -EFAULT;
1616
1617         if (! (dma->open_mode  & FMODE_READ))
1618                 return -ENXIO;
1619
1620         if (!dma->s->started) rme96xx_startcard(dma->s,exact);
1621         hwp = rme96xx_gethwptr(dma->s,0);
1622
1623         if(!(dma->started)){             
1624                 COMM          ("first read")
1625                      
1626                 dma->writeptr = hwp;
1627                 dma->readptr = hwp;
1628                 dma->started = 1;
1629         }
1630
1631         while (count > 0) {
1632                 cnt = rme96xx_getispace(dma,hwp);               
1633                 cnt>>=dma->formatshift;
1634                 cnt*=dma->inchannels;
1635
1636                 if (cnt > count)
1637                         cnt = count;
1638
1639                 if (cnt != 0) {
1640                         
1641                         if (rme96xx_copytouser(dma,buffer,cnt,hop))
1642                                 return ret ? ret : -EFAULT;
1643                         
1644                         count -= cnt;
1645                         buffer += cnt;
1646                         ret += cnt;
1647                         if (count == 0) return ret;
1648                 }
1649                 if (file->f_flags & O_NONBLOCK)
1650                         return ret ? ret : -EAGAIN;
1651                 
1652                 if ((hwp - dma->readptr) <= 0) {
1653                         interruptible_sleep_on(&(dma->wait));
1654                         
1655                         if (signal_pending(current))
1656                                 return ret ? ret : -ERESTARTSYS;
1657                 }                       
1658                 hwp = rme96xx_gethwptr(dma->s,exact);
1659
1660         }; /* count > 0 */
1661
1662         return ret;
1663 }
1664
1665 static int rm96xx_mmap(struct file *file, struct vm_area_struct *vma) {
1666         struct dmabuf *dma = (struct dmabuf *)file->private_data;
1667         rme96xx_info* s = dma->s;
1668         unsigned long size;
1669
1670         VALIDATE_STATE(s);
1671         lock_kernel();
1672
1673         if (vma->vm_pgoff != 0) {
1674                 unlock_kernel();
1675                 return -EINVAL;
1676         }
1677         size = vma->vm_end - vma->vm_start;
1678         if (size > RME96xx_DMA_MAX_SIZE) {
1679                 unlock_kernel();
1680                 return -EINVAL;
1681         }
1682
1683
1684         if (vma->vm_flags & VM_WRITE) {
1685                 if (!s->started) rme96xx_startcard(s,1);
1686
1687                 if (remap_pfn_range(vma, vma->vm_start, virt_to_phys(s->playbuf + dma->outoffset*RME96xx_DMA_MAX_SIZE) >> PAGE_SHIFT, size, vma->vm_page_prot)) {
1688                         unlock_kernel();
1689                         return -EAGAIN;
1690                 }
1691         } 
1692         else if (vma->vm_flags & VM_READ) {
1693                 if (!s->started) rme96xx_startcard(s,1);
1694                 if (remap_pfn_range(vma, vma->vm_start, virt_to_phys(s->playbuf + dma->inoffset*RME96xx_DMA_MAX_SIZE) >> PAGE_SHIFT, size, vma->vm_page_prot)) {
1695                         unlock_kernel();
1696                         return -EAGAIN;
1697                 }
1698         } else  {
1699                 unlock_kernel();
1700                 return -EINVAL;
1701         }
1702
1703
1704 /* this is the mapping */
1705         vma->vm_flags &= ~VM_IO;
1706         dma->mmapped = 1;
1707         unlock_kernel();
1708         return 0;
1709 }
1710
1711 static unsigned int rme96xx_poll(struct file *file, struct poll_table_struct *wait)
1712 {
1713         struct dmabuf *dma = (struct dmabuf *)file->private_data;
1714         rme96xx_info* s = dma->s;
1715         unsigned int mask = 0;
1716         unsigned int hwp,cnt;
1717
1718         DBG(printk("rme96xx poll_wait ...\n"));
1719         VALIDATE_STATE(s);
1720
1721         if (!s->started) {
1722                   mask |= POLLOUT | POLLWRNORM;
1723         }
1724         poll_wait(file, &dma->wait, wait);
1725
1726         hwp = rme96xx_gethwptr(dma->s,0);
1727
1728         DBG(printk("rme96xx poll: ..cnt %d > %d\n",cnt,s->fragsize));   
1729
1730         cnt = rme96xx_getispace(dma,hwp);
1731
1732         if (file->f_mode & FMODE_READ) 
1733              if (cnt > 0)
1734                   mask |= POLLIN | POLLRDNORM;
1735
1736
1737
1738         cnt = rme96xx_getospace(dma,hwp);
1739
1740         if (file->f_mode & FMODE_WRITE) 
1741              if (cnt > 0)
1742                   mask |= POLLOUT | POLLWRNORM;
1743
1744
1745 //        printk("rme96xx poll_wait ...%d > %d\n",rme96xx_getospace(dma,hwp),rme96xx_getispace(dma,hwp));
1746
1747         return mask;
1748 }
1749
1750
1751 static struct file_operations rme96xx_audio_fops = {
1752         .owner   = THIS_MODULE,
1753         .read    = rme96xx_read,
1754         .write   = rme96xx_write,
1755         .poll    = rme96xx_poll,
1756         .ioctl   = rme96xx_ioctl,  
1757         .mmap    = rm96xx_mmap,
1758         .open    = rme96xx_open,  
1759         .release = rme96xx_release 
1760 };
1761
1762 static int rme96xx_mixer_open(struct inode *inode, struct file *file)
1763 {
1764         int minor = iminor(inode);
1765         struct list_head *list;
1766         rme96xx_info *s;
1767
1768         COMM  ("mixer open");
1769
1770         nonseekable_open(inode, file);
1771         for (list = devs.next; ; list = list->next) {
1772                 if (list == &devs)
1773                         return -ENODEV;
1774                 s = list_entry(list, rme96xx_info, devs);
1775                 if (s->mixer== minor)
1776                         break;
1777         }
1778         VALIDATE_STATE(s);
1779         file->private_data = s;
1780
1781         COMM                       ("mixer opened")
1782         return 0;
1783 }
1784
1785 static int rme96xx_mixer_ioctl(struct inode *inode, struct file *file, unsigned int cmd, unsigned long arg)
1786 {
1787         rme96xx_info *s = (rme96xx_info *)file->private_data;
1788         u32 status;
1789         int spdifrate;
1790         void __user *argp = (void __user *)arg;
1791         int __user *p = argp;
1792
1793         status = readl(s->iobase + RME96xx_status_register);
1794         /* hack to convert rev 1.5 SPDIF rate to "crystalrate" format   HP 20020201 */
1795         rme96xx_spdif_sample_rate(s,&spdifrate);
1796         status = (status & ~RME96xx_F) | ((spdifrate<<22) & RME96xx_F);
1797
1798         VALIDATE_STATE(s);
1799         if (cmd == SOUND_MIXER_PRIVATE1) {
1800                 rme_mixer mixer;
1801                 if (copy_from_user(&mixer,argp,sizeof(mixer)))
1802                         return -EFAULT;
1803                 
1804                 mixer.devnr &= RME96xx_MASK_DEVS;
1805                 if (mixer.devnr >= devices)
1806                         mixer.devnr = devices-1;
1807                 if (file->f_mode & FMODE_WRITE && !s->dma[mixer.devnr].opened) {
1808                         /* modify only if device not open */
1809                         if (mixer.o_offset < 0)
1810                                 mixer.o_offset = 0;
1811                         if (mixer.o_offset >= RME96xx_CHANNELS_PER_CARD)
1812                                 mixer.o_offset = RME96xx_CHANNELS_PER_CARD-1;
1813                         if (mixer.i_offset < 0)
1814                                 mixer.i_offset = 0;
1815                         if (mixer.i_offset >= RME96xx_CHANNELS_PER_CARD)
1816                                 mixer.i_offset = RME96xx_CHANNELS_PER_CARD-1;
1817                         s->dma[mixer.devnr].outoffset = mixer.o_offset;
1818                         s->dma[mixer.devnr].inoffset = mixer.i_offset;
1819                 }
1820
1821                 mixer.o_offset = s->dma[mixer.devnr].outoffset;
1822                 mixer.i_offset = s->dma[mixer.devnr].inoffset;
1823
1824                 return copy_to_user(argp, &mixer, sizeof(mixer)) ? -EFAULT : 0;
1825         }
1826         if (cmd == SOUND_MIXER_PRIVATE2) {
1827                 return put_user(status, p);
1828         }
1829         if (cmd == SOUND_MIXER_PRIVATE3) {
1830                 u32 control;
1831                 if (copy_from_user(&control,argp,sizeof(control)))
1832                         return -EFAULT;
1833                 if (file->f_mode & FMODE_WRITE) {
1834                         s->control_register &= ~RME96xx_mixer_allowed;
1835                         s->control_register |= control & RME96xx_mixer_allowed;
1836                         writel(control,s->iobase + RME96xx_control_register);
1837                 }
1838
1839              return put_user(s->control_register, p);
1840         }
1841         return -1;
1842 }
1843
1844
1845
1846 static int rme96xx_mixer_release(struct inode *inode, struct file *file)
1847 {
1848         return 0;
1849 }
1850
1851 static /*const*/ struct file_operations rme96xx_mixer_fops = {
1852         .owner   = THIS_MODULE,
1853         .ioctl   = rme96xx_mixer_ioctl,
1854         .open    = rme96xx_mixer_open,
1855         .release = rme96xx_mixer_release,
1856 };