2  * Linux ARCnet driver - "raw mode" packet encapsulation (no soft headers)
 
   4  * Written 1994-1999 by Avery Pennarun.
 
   5  * Derived from skeleton.c by Donald Becker.
 
   7  * Special thanks to Contemporary Controls, Inc. (www.ccontrols.com)
 
   8  *  for sponsoring the further development of this driver.
 
  10  * **********************
 
  12  * The original copyright of skeleton.c was as follows:
 
  14  * skeleton.c Written 1993 by Donald Becker.
 
  15  * Copyright 1993 United States Government as represented by the
 
  16  * Director, National Security Agency.  This software may only be used
 
  17  * and distributed according to the terms of the GNU General Public License as
 
  18  * modified by SRC, incorporated herein by reference.
 
  20  * **********************
 
  22  * For more details, see drivers/net/arcnet.c
 
  24  * **********************
 
  27 #include <linux/module.h>
 
  28 #include <linux/init.h>
 
  29 #include <linux/if_arp.h>
 
  31 #include <linux/netdevice.h>
 
  32 #include <linux/skbuff.h>
 
  33 #include <linux/arcdevice.h>
 
  35 #define VERSION "arcnet: raw mode (`r') encapsulation support loaded.\n"
 
  38 static void rx(struct net_device *dev, int bufnum,
 
  39                struct archdr *pkthdr, int length);
 
  40 static int build_header(struct sk_buff *skb, struct net_device *dev,
 
  41                         unsigned short type, uint8_t daddr);
 
  42 static int prepare_tx(struct net_device *dev, struct archdr *pkt, int length,
 
  45 static struct ArcProto rawmode_proto =
 
  50         .build_header   = build_header,
 
  51         .prepare_tx     = prepare_tx,
 
  57 static int __init arcnet_raw_init(void)
 
  63         for (count = 0; count < 256; count++)
 
  64                 if (arc_proto_map[count] == arc_proto_default)
 
  65                         arc_proto_map[count] = &rawmode_proto;
 
  67         /* for raw mode, we only set the bcast proto if there's no better one */
 
  68         if (arc_bcast_proto == arc_proto_default)
 
  69                 arc_bcast_proto = &rawmode_proto;
 
  71         arc_proto_default = &rawmode_proto;
 
  75 static void __exit arcnet_raw_exit(void)
 
  77         arcnet_unregister_proto(&rawmode_proto);
 
  80 module_init(arcnet_raw_init);
 
  81 module_exit(arcnet_raw_exit);
 
  83 MODULE_LICENSE("GPL");
 
  87 static void rx(struct net_device *dev, int bufnum,
 
  88                struct archdr *pkthdr, int length)
 
  90         struct arcnet_local *lp = dev->priv;
 
  92         struct archdr *pkt = pkthdr;
 
  95         BUGMSG(D_DURING, "it's a raw packet (length=%d)\n", length);
 
 102         skb = alloc_skb(length + ARC_HDR_SIZE, GFP_ATOMIC);
 
 104                 BUGMSG(D_NORMAL, "Memory squeeze, dropping packet.\n");
 
 105                 lp->stats.rx_dropped++;
 
 108         skb_put(skb, length + ARC_HDR_SIZE);
 
 111         pkt = (struct archdr *) skb->data;
 
 113         skb_reset_mac_header(skb);
 
 114         skb_pull(skb, ARC_HDR_SIZE);
 
 116         /* up to sizeof(pkt->soft) has already been copied from the card */
 
 117         memcpy(pkt, pkthdr, sizeof(struct archdr));
 
 118         if (length > sizeof(pkt->soft))
 
 119                 lp->hw.copy_from_card(dev, bufnum, ofs + sizeof(pkt->soft),
 
 120                                       pkt->soft.raw + sizeof(pkt->soft),
 
 121                                       length - sizeof(pkt->soft));
 
 123         BUGLVL(D_SKB) arcnet_dump_skb(dev, skb, "rx");
 
 125         skb->protocol = __constant_htons(ETH_P_ARCNET);
 
 128         dev->last_rx = jiffies;
 
 133  * Create the ARCnet hard/soft headers for raw mode.
 
 134  * There aren't any soft headers in raw mode - not even the protocol id.
 
 136 static int build_header(struct sk_buff *skb, struct net_device *dev,
 
 137                         unsigned short type, uint8_t daddr)
 
 139         int hdr_size = ARC_HDR_SIZE;
 
 140         struct archdr *pkt = (struct archdr *) skb_push(skb, hdr_size);
 
 143          * Set the source hardware address.
 
 145          * This is pretty pointless for most purposes, but it can help in
 
 146          * debugging.  ARCnet does not allow us to change the source address in
 
 147          * the actual packet sent)
 
 149         pkt->hard.source = *dev->dev_addr;
 
 151         /* see linux/net/ethernet/eth.c to see where I got the following */
 
 153         if (dev->flags & (IFF_LOOPBACK | IFF_NOARP)) {
 
 155                  * FIXME: fill in the last byte of the dest ipaddr here to better
 
 156                  * comply with RFC1051 in "noarp" mode.
 
 161         /* otherwise, just fill it in and go! */
 
 162         pkt->hard.dest = daddr;
 
 164         return hdr_size;        /* success */
 
 168 static int prepare_tx(struct net_device *dev, struct archdr *pkt, int length,
 
 171         struct arcnet_local *lp = dev->priv;
 
 172         struct arc_hardware *hard = &pkt->hard;
 
 175         BUGMSG(D_DURING, "prepare_tx: txbufs=%d/%d/%d\n",
 
 176                lp->next_tx, lp->cur_tx, bufnum);
 
 178         length -= ARC_HDR_SIZE; /* hard header is not included in packet length */
 
 181                 /* should never happen! other people already check for this. */
 
 182                 BUGMSG(D_NORMAL, "Bug!  prepare_tx with size %d (> %d)\n",
 
 186         if (length >= MinTU) {
 
 188                 hard->offset[1] = ofs = 512 - length;
 
 189         } else if (length > MTU) {
 
 191                 hard->offset[1] = ofs = 512 - length - 3;
 
 193                 hard->offset[0] = ofs = 256 - length;
 
 195         BUGMSG(D_DURING, "prepare_tx: length=%d ofs=%d\n",
 
 198         lp->hw.copy_to_card(dev, bufnum, 0, hard, ARC_HDR_SIZE);
 
 199         lp->hw.copy_to_card(dev, bufnum, ofs, &pkt->soft, length);
 
 201         lp->lastload_dest = hard->dest;