git.oblomov.eu Git - linux-2.6/blob - drivers/usb/host/ehci-hub.c

   1 /*
   2  * Copyright (C) 2001-2004 by David Brownell
   3  *
   4  * This program is free software; you can redistribute it and/or modify it
   5  * under the terms of the GNU General Public License as published by the
   6  * Free Software Foundation; either version 2 of the License, or (at your
   7  * option) any later version.
   8  *
   9  * This program is distributed in the hope that it will be useful, but
  10  * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
  11  * or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
  12  * for more details.
  13  *
  14  * You should have received a copy of the GNU General Public License
  15  * along with this program; if not, write to the Free Software Foundation,
  16  * Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
  17  */
  18
  19 /* this file is part of ehci-hcd.c */
  20
  21 /*-------------------------------------------------------------------------*/
  22
  23 /*
  24  * EHCI Root Hub ... the nonsharable stuff
  25  *
  26  * Registers don't need cpu_to_le32, that happens transparently
  27  */
  28
  29 /*-------------------------------------------------------------------------*/
  30
  31 #ifdef  CONFIG_PM
  32
  33 static int ehci_bus_suspend (struct usb_hcd *hcd)
  34 {
  35         struct ehci_hcd         *ehci = hcd_to_ehci (hcd);
  36         int                     port;
  37         int                     mask;
  38
  39         ehci_dbg(ehci, "suspend root hub\n");
  40
  41         if (time_before (jiffies, ehci->next_statechange))
  42                 msleep(5);
  43
  44         port = HCS_N_PORTS (ehci->hcs_params);
  45         spin_lock_irq (&ehci->lock);
  46
  47         /* stop schedules, clean any completed work */
  48         if (HC_IS_RUNNING(hcd->state)) {
  49                 ehci_quiesce (ehci);
  50                 hcd->state = HC_STATE_QUIESCING;
  51         }
  52         ehci->command = ehci_readl(ehci, &ehci->regs->command);
  53         if (ehci->reclaim)
  54                 ehci->reclaim_ready = 1;
  55         ehci_work(ehci);
  56
  57         /* Unlike other USB host controller types, EHCI doesn't have
  58          * any notion of "global" or bus-wide suspend.  The driver has
  59          * to manually suspend all the active unsuspended ports, and
  60          * then manually resume them in the bus_resume() routine.
  61          */
  62         ehci->bus_suspended = 0;
  63         while (port--) {
  64                 u32 __iomem     *reg = &ehci->regs->port_status [port];
  65                 u32             t1 = ehci_readl(ehci, reg) & ~PORT_RWC_BITS;
  66                 u32             t2 = t1;
  67
  68                 /* keep track of which ports we suspend */
  69                 if ((t1 & PORT_PE) && !(t1 & PORT_OWNER) &&
  70                                 !(t1 & PORT_SUSPEND)) {
  71                         t2 |= PORT_SUSPEND;
  72                         set_bit(port, &ehci->bus_suspended);
  73                 }
  74
  75                 /* enable remote wakeup on all ports */
  76                 if (device_may_wakeup(&hcd->self.root_hub->dev))
  77                         t2 |= PORT_WKOC_E|PORT_WKDISC_E|PORT_WKCONN_E;
  78                 else
  79                         t2 &= ~(PORT_WKOC_E|PORT_WKDISC_E|PORT_WKCONN_E);
  80
  81                 if (t1 != t2) {
  82                         ehci_vdbg (ehci, "port %d, %08x -> %08x\n",
  83                                 port + 1, t1, t2);
  84                         ehci_writel(ehci, t2, reg);
  85                 }
  86         }
  87
  88         /* turn off now-idle HC */
  89         del_timer_sync (&ehci->watchdog);
  90         ehci_halt (ehci);
  91         hcd->state = HC_STATE_SUSPENDED;
  92
  93         /* allow remote wakeup */
  94         mask = INTR_MASK;
  95         if (!device_may_wakeup(&hcd->self.root_hub->dev))
  96                 mask &= ~STS_PCD;
  97         ehci_writel(ehci, mask, &ehci->regs->intr_enable);
  98         ehci_readl(ehci, &ehci->regs->intr_enable);
  99
 100         ehci->next_statechange = jiffies + msecs_to_jiffies(10);
 101         spin_unlock_irq (&ehci->lock);
 102         return 0;
 103 }
 104
 105
 106 /* caller has locked the root hub, and should reset/reinit on error */
 107 static int ehci_bus_resume (struct usb_hcd *hcd)
 108 {
 109         struct ehci_hcd         *ehci = hcd_to_ehci (hcd);
 110         u32                     temp;
 111         int                     i;
 112
 113         if (time_before (jiffies, ehci->next_statechange))
 114                 msleep(5);
 115         spin_lock_irq (&ehci->lock);
 116
 117         /* Ideally and we've got a real resume here, and no port's power
 118          * was lost.  (For PCI, that means Vaux was maintained.)  But we
 119          * could instead be restoring a swsusp snapshot -- so that BIOS was
 120          * the last user of the controller, not reset/pm hardware keeping
 121          * state we gave to it.
 122          */
 123         temp = ehci_readl(ehci, &ehci->regs->intr_enable);
 124         ehci_dbg(ehci, "resume root hub%s\n", temp ? "" : " after power loss");
 125
 126         /* at least some APM implementations will try to deliver
 127          * IRQs right away, so delay them until we're ready.
 128          */
 129         ehci_writel(ehci, 0, &ehci->regs->intr_enable);
 130
 131         /* re-init operational registers */
 132         ehci_writel(ehci, 0, &ehci->regs->segment);
 133         ehci_writel(ehci, ehci->periodic_dma, &ehci->regs->frame_list);
 134         ehci_writel(ehci, (u32) ehci->async->qh_dma, &ehci->regs->async_next);
 135
 136         /* restore CMD_RUN, framelist size, and irq threshold */
 137         ehci_writel(ehci, ehci->command, &ehci->regs->command);
 138
 139         /* manually resume the ports we suspended during bus_suspend() */
 140         i = HCS_N_PORTS (ehci->hcs_params);
 141         while (i--) {
 142                 temp = ehci_readl(ehci, &ehci->regs->port_status [i]);
 143                 temp &= ~(PORT_RWC_BITS
 144                         | PORT_WKOC_E | PORT_WKDISC_E | PORT_WKCONN_E);
 145                 if (test_bit(i, &ehci->bus_suspended) &&
 146                                 (temp & PORT_SUSPEND)) {
 147                         ehci->reset_done [i] = jiffies + msecs_to_jiffies (20);
 148                         temp |= PORT_RESUME;
 149                 }
 150                 ehci_writel(ehci, temp, &ehci->regs->port_status [i]);
 151         }
 152         i = HCS_N_PORTS (ehci->hcs_params);
 153         mdelay (20);
 154         while (i--) {
 155                 temp = ehci_readl(ehci, &ehci->regs->port_status [i]);
 156                 if (test_bit(i, &ehci->bus_suspended) &&
 157                                 (temp & PORT_SUSPEND)) {
 158                         temp &= ~(PORT_RWC_BITS | PORT_RESUME);
 159                         ehci_writel(ehci, temp, &ehci->regs->port_status [i]);
 160                         ehci_vdbg (ehci, "resumed port %d\n", i + 1);
 161                 }
 162         }
 163         (void) ehci_readl(ehci, &ehci->regs->command);
 164
 165         /* maybe re-activate the schedule(s) */
 166         temp = 0;
 167         if (ehci->async->qh_next.qh)
 168                 temp |= CMD_ASE;
 169         if (ehci->periodic_sched)
 170                 temp |= CMD_PSE;
 171         if (temp) {
 172                 ehci->command |= temp;
 173                 ehci_writel(ehci, ehci->command, &ehci->regs->command);
 174         }
 175
 176         ehci->next_statechange = jiffies + msecs_to_jiffies(5);
 177         hcd->state = HC_STATE_RUNNING;
 178
 179         /* Now we can safely re-enable irqs */
 180         ehci_writel(ehci, INTR_MASK, &ehci->regs->intr_enable);
 181
 182         spin_unlock_irq (&ehci->lock);
 183         return 0;
 184 }
 185
 186 #else
 187
 188 #define ehci_bus_suspend        NULL
 189 #define ehci_bus_resume         NULL
 190
 191 #endif  /* CONFIG_PM */
 192
 193 /*-------------------------------------------------------------------------*/
 194
 195 /* Display the ports dedicated to the companion controller */
 196 static ssize_t show_companion(struct class_device *class_dev, char *buf)
 197 {
 198         struct ehci_hcd         *ehci;
 199         int                     nports, index, n;
 200         int                     count = PAGE_SIZE;
 201         char                    *ptr = buf;
 202
 203         ehci = hcd_to_ehci(bus_to_hcd(class_get_devdata(class_dev)));
 204         nports = HCS_N_PORTS(ehci->hcs_params);
 205
 206         for (index = 0; index < nports; ++index) {
 207                 if (test_bit(index, &ehci->companion_ports)) {
 208                         n = scnprintf(ptr, count, "%d\n", index + 1);
 209                         ptr += n;
 210                         count -= n;
 211                 }
 212         }
 213         return ptr - buf;
 214 }
 215
 216 /*
 217  * Dedicate or undedicate a port to the companion controller.
 218  * Syntax is "[-]portnum", where a leading '-' sign means
 219  * return control of the port to the EHCI controller.
 220  */
 221 static ssize_t store_companion(struct class_device *class_dev,
 222                 const char *buf, size_t count)
 223 {
 224         struct ehci_hcd         *ehci;
 225         int                     portnum, new_owner, try;
 226         u32 __iomem             *status_reg;
 227         u32                     port_status;
 228
 229         ehci = hcd_to_ehci(bus_to_hcd(class_get_devdata(class_dev)));
 230         new_owner = PORT_OWNER;         /* Owned by companion */
 231         if (sscanf(buf, "%d", &portnum) != 1)
 232                 return -EINVAL;
 233         if (portnum < 0) {
 234                 portnum = - portnum;
 235                 new_owner = 0;          /* Owned by EHCI */
 236         }
 237         if (portnum <= 0 || portnum > HCS_N_PORTS(ehci->hcs_params))
 238                 return -ENOENT;
 239         status_reg = &ehci->regs->port_status[--portnum];
 240         if (new_owner)
 241                 set_bit(portnum, &ehci->companion_ports);
 242         else
 243                 clear_bit(portnum, &ehci->companion_ports);
 244
 245         /*
 246          * The controller won't set the OWNER bit if the port is
 247          * enabled, so this loop will sometimes require at least two
 248          * iterations: one to disable the port and one to set OWNER.
 249          */
 250
 251         for (try = 4; try > 0; --try) {
 252                 spin_lock_irq(&ehci->lock);
 253                 port_status = ehci_readl(ehci, status_reg);
 254                 if ((port_status & PORT_OWNER) == new_owner
 255                                 || (port_status & (PORT_OWNER | PORT_CONNECT))
 256                                         == 0)
 257                         try = 0;
 258                 else {
 259                         port_status ^= PORT_OWNER;
 260                         port_status &= ~(PORT_PE | PORT_RWC_BITS);
 261                         ehci_writel(ehci, port_status, status_reg);
 262                 }
 263                 spin_unlock_irq(&ehci->lock);
 264                 if (try > 1)
 265                         msleep(5);
 266         }
 267         return count;
 268 }
 269 static CLASS_DEVICE_ATTR(companion, 0644, show_companion, store_companion);
 270
 271 static inline void create_companion_file(struct ehci_hcd *ehci)
 272 {
 273         int     i;
 274
 275         /* with integrated TT there is no companion! */
 276         if (!ehci_is_TDI(ehci))
 277                 i = class_device_create_file(ehci_to_hcd(ehci)->self.class_dev,
 278                                 &class_device_attr_companion);
 279 }
 280
 281 static inline void remove_companion_file(struct ehci_hcd *ehci)
 282 {
 283         /* with integrated TT there is no companion! */
 284         if (!ehci_is_TDI(ehci))
 285                 class_device_remove_file(ehci_to_hcd(ehci)->self.class_dev,
 286                                 &class_device_attr_companion);
 287 }
 288
 289
 290 /*-------------------------------------------------------------------------*/
 291
 292 static int check_reset_complete (
 293         struct ehci_hcd *ehci,
 294         int             index,
 295         u32 __iomem     *status_reg,
 296         int             port_status
 297 ) {
 298         if (!(port_status & PORT_CONNECT)) {
 299                 ehci->reset_done [index] = 0;
 300                 return port_status;
 301         }
 302
 303         /* if reset finished and it's still not enabled -- handoff */
 304         if (!(port_status & PORT_PE)) {
 305
 306                 /* with integrated TT, there's nobody to hand it to! */
 307                 if (ehci_is_TDI(ehci)) {
 308                         ehci_dbg (ehci,
 309                                 "Failed to enable port %d on root hub TT\n",
 310                                 index+1);
 311                         return port_status;
 312                 }
 313
 314                 ehci_dbg (ehci, "port %d full speed --> companion\n",
 315                         index + 1);
 316
 317                 // what happens if HCS_N_CC(params) == 0 ?
 318                 port_status |= PORT_OWNER;
 319                 port_status &= ~PORT_RWC_BITS;
 320                 ehci_writel(ehci, port_status, status_reg);
 321
 322         } else
 323                 ehci_dbg (ehci, "port %d high speed\n", index + 1);
 324
 325         return port_status;
 326 }
 327
 328 /*-------------------------------------------------------------------------*/
 329
 330
 331 /* build "status change" packet (one or two bytes) from HC registers */
 332
 333 static int
 334 ehci_hub_status_data (struct usb_hcd *hcd, char *buf)
 335 {
 336         struct ehci_hcd *ehci = hcd_to_ehci (hcd);
 337         u32             temp, status = 0;
 338         u32             mask;
 339         int             ports, i, retval = 1;
 340         unsigned long   flags;
 341
 342         /* if !USB_SUSPEND, root hub timers won't get shut down ... */
 343         if (!HC_IS_RUNNING(hcd->state))
 344                 return 0;
 345
 346         /* init status to no-changes */
 347         buf [0] = 0;
 348         ports = HCS_N_PORTS (ehci->hcs_params);
 349         if (ports > 7) {
 350                 buf [1] = 0;
 351                 retval++;
 352         }
 353
 354         /* Some boards (mostly VIA?) report bogus overcurrent indications,
 355          * causing massive log spam unless we completely ignore them.  It
 356          * may be relevant that VIA VT8235 controlers, where PORT_POWER is
 357          * always set, seem to clear PORT_OCC and PORT_CSC when writing to
 358          * PORT_POWER; that's surprising, but maybe within-spec.
 359          */
 360         if (!ignore_oc)
 361                 mask = PORT_CSC | PORT_PEC | PORT_OCC;
 362         else
 363                 mask = PORT_CSC | PORT_PEC;
 364         // PORT_RESUME from hardware ~= PORT_STAT_C_SUSPEND
 365
 366         /* no hub change reports (bit 0) for now (power, ...) */
 367
 368         /* port N changes (bit N)? */
 369         spin_lock_irqsave (&ehci->lock, flags);
 370         for (i = 0; i < ports; i++) {
 371                 temp = ehci_readl(ehci, &ehci->regs->port_status [i]);
 372
 373                 /*
 374                  * Return status information even for ports with OWNER set.
 375                  * Otherwise khubd wouldn't see the disconnect event when a
 376                  * high-speed device is switched over to the companion
 377                  * controller by the user.
 378                  */
 379
 380                 if (!(temp & PORT_CONNECT))
 381                         ehci->reset_done [i] = 0;
 382                 if ((temp & mask) != 0
 383                                 || ((temp & PORT_RESUME) != 0
 384                                         && time_after_eq(jiffies,
 385                                                 ehci->reset_done[i]))) {
 386                         if (i < 7)
 387                             buf [0] |= 1 << (i + 1);
 388                         else
 389                             buf [1] |= 1 << (i - 7);
 390                         status = STS_PCD;
 391                 }
 392         }
 393         /* FIXME autosuspend idle root hubs */
 394         spin_unlock_irqrestore (&ehci->lock, flags);
 395         return status ? retval : 0;
 396 }
 397
 398 /*-------------------------------------------------------------------------*/
 399
 400 static void
 401 ehci_hub_descriptor (
 402         struct ehci_hcd                 *ehci,
 403         struct usb_hub_descriptor       *desc
 404 ) {
 405         int             ports = HCS_N_PORTS (ehci->hcs_params);
 406         u16             temp;
 407
 408         desc->bDescriptorType = 0x29;
 409         desc->bPwrOn2PwrGood = 10;      /* ehci 1.0, 2.3.9 says 20ms max */
 410         desc->bHubContrCurrent = 0;
 411
 412         desc->bNbrPorts = ports;
 413         temp = 1 + (ports / 8);
 414         desc->bDescLength = 7 + 2 * temp;
 415
 416         /* two bitmaps:  ports removable, and usb 1.0 legacy PortPwrCtrlMask */
 417         memset (&desc->bitmap [0], 0, temp);
 418         memset (&desc->bitmap [temp], 0xff, temp);
 419
 420         temp = 0x0008;                  /* per-port overcurrent reporting */
 421         if (HCS_PPC (ehci->hcs_params))
 422                 temp |= 0x0001;         /* per-port power control */
 423         else
 424                 temp |= 0x0002;         /* no power switching */
 425 #if 0
 426 // re-enable when we support USB_PORT_FEAT_INDICATOR below.
 427         if (HCS_INDICATOR (ehci->hcs_params))
 428                 temp |= 0x0080;         /* per-port indicators (LEDs) */
 429 #endif
 430         desc->wHubCharacteristics = (__force __u16)cpu_to_le16 (temp);
 431 }
 432
 433 /*-------------------------------------------------------------------------*/
 434
 435 #define PORT_WAKE_BITS  (PORT_WKOC_E|PORT_WKDISC_E|PORT_WKCONN_E)
 436
 437 static int ehci_hub_control (
 438         struct usb_hcd  *hcd,
 439         u16             typeReq,
 440         u16             wValue,
 441         u16             wIndex,
 442         char            *buf,
 443         u16             wLength
 444 ) {
 445         struct ehci_hcd *ehci = hcd_to_ehci (hcd);
 446         int             ports = HCS_N_PORTS (ehci->hcs_params);
 447         u32 __iomem     *status_reg = &ehci->regs->port_status[wIndex - 1];
 448         u32             temp, status;
 449         unsigned long   flags;
 450         int             retval = 0;
 451         unsigned        selector;
 452
 453         /*
 454          * FIXME:  support SetPortFeatures USB_PORT_FEAT_INDICATOR.
 455          * HCS_INDICATOR may say we can change LEDs to off/amber/green.
 456          * (track current state ourselves) ... blink for diagnostics,
 457          * power, "this is the one", etc.  EHCI spec supports this.
 458          */
 459
 460         spin_lock_irqsave (&ehci->lock, flags);
 461         switch (typeReq) {
 462         case ClearHubFeature:
 463                 switch (wValue) {
 464                 case C_HUB_LOCAL_POWER:
 465                 case C_HUB_OVER_CURRENT:
 466                         /* no hub-wide feature/status flags */
 467                         break;
 468                 default:
 469                         goto error;
 470                 }
 471                 break;
 472         case ClearPortFeature:
 473                 if (!wIndex || wIndex > ports)
 474                         goto error;
 475                 wIndex--;
 476                 temp = ehci_readl(ehci, status_reg);
 477
 478                 /*
 479                  * Even if OWNER is set, so the port is owned by the
 480                  * companion controller, khubd needs to be able to clear
 481                  * the port-change status bits (especially
 482                  * USB_PORT_FEAT_C_CONNECTION).
 483                  */
 484
 485                 switch (wValue) {
 486                 case USB_PORT_FEAT_ENABLE:
 487                         ehci_writel(ehci, temp & ~PORT_PE, status_reg);
 488                         break;
 489                 case USB_PORT_FEAT_C_ENABLE:
 490                         ehci_writel(ehci, (temp & ~PORT_RWC_BITS) | PORT_PEC,
 491                                         status_reg);
 492                         break;
 493                 case USB_PORT_FEAT_SUSPEND:
 494                         if (temp & PORT_RESET)
 495                                 goto error;
 496                         if (ehci->no_selective_suspend)
 497                                 break;
 498                         if (temp & PORT_SUSPEND) {
 499                                 if ((temp & PORT_PE) == 0)
 500                                         goto error;
 501                                 /* resume signaling for 20 msec */
 502                                 temp &= ~(PORT_RWC_BITS | PORT_WAKE_BITS);
 503                                 ehci_writel(ehci, temp | PORT_RESUME,
 504                                                 status_reg);
 505                                 ehci->reset_done [wIndex] = jiffies
 506                                                 + msecs_to_jiffies (20);
 507                         }
 508                         break;
 509                 case USB_PORT_FEAT_C_SUSPEND:
 510                         /* we auto-clear this feature */
 511                         break;
 512                 case USB_PORT_FEAT_POWER:
 513                         if (HCS_PPC (ehci->hcs_params))
 514                                 ehci_writel(ehci,
 515                                           temp & ~(PORT_RWC_BITS | PORT_POWER),
 516                                           status_reg);
 517                         break;
 518                 case USB_PORT_FEAT_C_CONNECTION:
 519                         ehci_writel(ehci, (temp & ~PORT_RWC_BITS) | PORT_CSC,
 520                                         status_reg);
 521                         break;
 522                 case USB_PORT_FEAT_C_OVER_CURRENT:
 523                         ehci_writel(ehci, (temp & ~PORT_RWC_BITS) | PORT_OCC,
 524                                         status_reg);
 525                         break;
 526                 case USB_PORT_FEAT_C_RESET:
 527                         /* GetPortStatus clears reset */
 528                         break;
 529                 default:
 530                         goto error;
 531                 }
 532                 ehci_readl(ehci, &ehci->regs->command); /* unblock posted write */
 533                 break;
 534         case GetHubDescriptor:
 535                 ehci_hub_descriptor (ehci, (struct usb_hub_descriptor *)
 536                         buf);
 537                 break;
 538         case GetHubStatus:
 539                 /* no hub-wide feature/status flags */
 540                 memset (buf, 0, 4);
 541                 //cpu_to_le32s ((u32 *) buf);
 542                 break;
 543         case GetPortStatus:
 544                 if (!wIndex || wIndex > ports)
 545                         goto error;
 546                 wIndex--;
 547                 status = 0;
 548                 temp = ehci_readl(ehci, status_reg);
 549
 550                 // wPortChange bits
 551                 if (temp & PORT_CSC)
 552                         status |= 1 << USB_PORT_FEAT_C_CONNECTION;
 553                 if (temp & PORT_PEC)
 554                         status |= 1 << USB_PORT_FEAT_C_ENABLE;
 555                 if ((temp & PORT_OCC) && !ignore_oc)
 556                         status |= 1 << USB_PORT_FEAT_C_OVER_CURRENT;
 557
 558                 /* whoever resumes must GetPortStatus to complete it!! */
 559                 if (temp & PORT_RESUME) {
 560
 561                         /* Remote Wakeup received? */
 562                         if (!ehci->reset_done[wIndex]) {
 563                                 /* resume signaling for 20 msec */
 564                                 ehci->reset_done[wIndex] = jiffies
 565                                                 + msecs_to_jiffies(20);
 566                                 /* check the port again */
 567                                 mod_timer(&ehci_to_hcd(ehci)->rh_timer,
 568                                                 ehci->reset_done[wIndex]);
 569                         }
 570
 571                         /* resume completed? */
 572                         else if (time_after_eq(jiffies,
 573                                         ehci->reset_done[wIndex])) {
 574                                 status |= 1 << USB_PORT_FEAT_C_SUSPEND;
 575                                 ehci->reset_done[wIndex] = 0;
 576
 577                                 /* stop resume signaling */
 578                                 temp = ehci_readl(ehci, status_reg);
 579                                 ehci_writel(ehci,
 580                                         temp & ~(PORT_RWC_BITS | PORT_RESUME),
 581                                         status_reg);
 582                                 retval = handshake(ehci, status_reg,
 583                                            PORT_RESUME, 0, 2000 /* 2msec */);
 584                                 if (retval != 0) {
 585                                         ehci_err(ehci,
 586                                                 "port %d resume error %d\n",
 587                                                 wIndex + 1, retval);
 588                                         goto error;
 589                                 }
 590                                 temp &= ~(PORT_SUSPEND|PORT_RESUME|(3<<10));
 591                         }
 592                 }
 593
 594                 /* whoever resets must GetPortStatus to complete it!! */
 595                 if ((temp & PORT_RESET)
 596                                 && time_after_eq(jiffies,
 597                                         ehci->reset_done[wIndex])) {
 598                         status |= 1 << USB_PORT_FEAT_C_RESET;
 599                         ehci->reset_done [wIndex] = 0;
 600
 601                         /* force reset to complete */
 602                         ehci_writel(ehci, temp & ~(PORT_RWC_BITS | PORT_RESET),
 603                                         status_reg);
 604                         /* REVISIT:  some hardware needs 550+ usec to clear
 605                          * this bit; seems too long to spin routinely...
 606                          */
 607                         retval = handshake(ehci, status_reg,
 608                                         PORT_RESET, 0, 750);
 609                         if (retval != 0) {
 610                                 ehci_err (ehci, "port %d reset error %d\n",
 611                                         wIndex + 1, retval);
 612                                 goto error;
 613                         }
 614
 615                         /* see what we found out */
 616                         temp = check_reset_complete (ehci, wIndex, status_reg,
 617                                         ehci_readl(ehci, status_reg));
 618                 }
 619
 620                 /* transfer dedicated ports to the companion hc */
 621                 if ((temp & PORT_CONNECT) &&
 622                                 test_bit(wIndex, &ehci->companion_ports)) {
 623                         temp &= ~PORT_RWC_BITS;
 624                         temp |= PORT_OWNER;
 625                         ehci_writel(ehci, temp, status_reg);
 626                         ehci_dbg(ehci, "port %d --> companion\n", wIndex + 1);
 627                         temp = ehci_readl(ehci, status_reg);
 628                 }
 629
 630                 /*
 631                  * Even if OWNER is set, there's no harm letting khubd
 632                  * see the wPortStatus values (they should all be 0 except
 633                  * for PORT_POWER anyway).
 634                  */
 635
 636                 if (temp & PORT_CONNECT) {
 637                         status |= 1 << USB_PORT_FEAT_CONNECTION;
 638                         // status may be from integrated TT
 639                         status |= ehci_port_speed(ehci, temp);
 640                 }
 641                 if (temp & PORT_PE)
 642                         status |= 1 << USB_PORT_FEAT_ENABLE;
 643                 if (temp & (PORT_SUSPEND|PORT_RESUME))
 644                         status |= 1 << USB_PORT_FEAT_SUSPEND;
 645                 if (temp & PORT_OC)
 646                         status |= 1 << USB_PORT_FEAT_OVER_CURRENT;
 647                 if (temp & PORT_RESET)
 648                         status |= 1 << USB_PORT_FEAT_RESET;
 649                 if (temp & PORT_POWER)
 650                         status |= 1 << USB_PORT_FEAT_POWER;
 651
 652 #ifndef EHCI_VERBOSE_DEBUG
 653         if (status & ~0xffff)   /* only if wPortChange is interesting */
 654 #endif
 655                 dbg_port (ehci, "GetStatus", wIndex + 1, temp);
 656                 // we "know" this alignment is good, caller used kmalloc()...
 657                 *((__le32 *) buf) = cpu_to_le32 (status);
 658                 break;
 659         case SetHubFeature:
 660                 switch (wValue) {
 661                 case C_HUB_LOCAL_POWER:
 662                 case C_HUB_OVER_CURRENT:
 663                         /* no hub-wide feature/status flags */
 664                         break;
 665                 default:
 666                         goto error;
 667                 }
 668                 break;
 669         case SetPortFeature:
 670                 selector = wIndex >> 8;
 671                 wIndex &= 0xff;
 672                 if (!wIndex || wIndex > ports)
 673                         goto error;
 674                 wIndex--;
 675                 temp = ehci_readl(ehci, status_reg);
 676                 if (temp & PORT_OWNER)
 677                         break;
 678
 679                 temp &= ~PORT_RWC_BITS;
 680                 switch (wValue) {
 681                 case USB_PORT_FEAT_SUSPEND:
 682                         if (ehci->no_selective_suspend)
 683                                 break;
 684                         if ((temp & PORT_PE) == 0
 685                                         || (temp & PORT_RESET) != 0)
 686                                 goto error;
 687                         if (device_may_wakeup(&hcd->self.root_hub->dev))
 688                                 temp |= PORT_WAKE_BITS;
 689                         ehci_writel(ehci, temp | PORT_SUSPEND, status_reg);
 690                         break;
 691                 case USB_PORT_FEAT_POWER:
 692                         if (HCS_PPC (ehci->hcs_params))
 693                                 ehci_writel(ehci, temp | PORT_POWER,
 694                                                 status_reg);
 695                         break;
 696                 case USB_PORT_FEAT_RESET:
 697                         if (temp & PORT_RESUME)
 698                                 goto error;
 699                         /* line status bits may report this as low speed,
 700                          * which can be fine if this root hub has a
 701                          * transaction translator built in.
 702                          */
 703                         if ((temp & (PORT_PE|PORT_CONNECT)) == PORT_CONNECT
 704                                         && !ehci_is_TDI(ehci)
 705                                         && PORT_USB11 (temp)) {
 706                                 ehci_dbg (ehci,
 707                                         "port %d low speed --> companion\n",
 708                                         wIndex + 1);
 709                                 temp |= PORT_OWNER;
 710                         } else {
 711                                 ehci_vdbg (ehci, "port %d reset\n", wIndex + 1);
 712                                 temp |= PORT_RESET;
 713                                 temp &= ~PORT_PE;
 714
 715                                 /*
 716                                  * caller must wait, then call GetPortStatus
 717                                  * usb 2.0 spec says 50 ms resets on root
 718                                  */
 719                                 ehci->reset_done [wIndex] = jiffies
 720                                                 + msecs_to_jiffies (50);
 721                         }
 722                         ehci_writel(ehci, temp, status_reg);
 723                         break;
 724
 725                 /* For downstream facing ports (these):  one hub port is put
 726                  * into test mode according to USB2 11.24.2.13, then the hub
 727                  * must be reset (which for root hub now means rmmod+modprobe,
 728                  * or else system reboot).  See EHCI 2.3.9 and 4.14 for info
 729                  * about the EHCI-specific stuff.
 730                  */
 731                 case USB_PORT_FEAT_TEST:
 732                         if (!selector || selector > 5)
 733                                 goto error;
 734                         ehci_quiesce(ehci);
 735                         ehci_halt(ehci);
 736                         temp |= selector << 16;
 737                         ehci_writel(ehci, temp, status_reg);
 738                         break;
 739
 740                 default:
 741                         goto error;
 742                 }
 743                 ehci_readl(ehci, &ehci->regs->command); /* unblock posted writes */
 744                 break;
 745
 746         default:
 747 error:
 748                 /* "stall" on error */
 749                 retval = -EPIPE;
 750         }
 751         spin_unlock_irqrestore (&ehci->lock, flags);
 752         return retval;
 753 }