Merge branch 'for-linus' of git://brick.kernel.dk/data/git/linux-2.6-block
[linux-2.6] / drivers / usb / host / ohci-at91.c
1 /*
2  * OHCI HCD (Host Controller Driver) for USB.
3  *
4  *  Copyright (C) 2004 SAN People (Pty) Ltd.
5  *  Copyright (C) 2005 Thibaut VARENE <varenet@parisc-linux.org>
6  *
7  * AT91 Bus Glue
8  *
9  * Based on fragments of 2.4 driver by Rick Bronson.
10  * Based on ohci-omap.c
11  *
12  * This file is licenced under the GPL.
13  */
14
15 #include <linux/clk.h>
16 #include <linux/platform_device.h>
17
18 #include <asm/mach-types.h>
19 #include <asm/hardware.h>
20 #include <asm/arch/board.h>
21
22 #ifndef CONFIG_ARCH_AT91
23 #error "CONFIG_ARCH_AT91 must be defined."
24 #endif
25
26 /* interface and function clocks */
27 static struct clk *iclk, *fclk;
28 static int clocked;
29
30 extern int usb_disabled(void);
31
32 /*-------------------------------------------------------------------------*/
33
34 static void at91_start_hc(struct platform_device *pdev)
35 {
36         struct usb_hcd *hcd = platform_get_drvdata(pdev);
37         struct ohci_regs __iomem *regs = hcd->regs;
38
39         dev_dbg(&pdev->dev, "start\n");
40
41         /*
42          * Start the USB clocks.
43          */
44         clk_enable(iclk);
45         clk_enable(fclk);
46         clocked = 1;
47
48         /*
49          * The USB host controller must remain in reset.
50          */
51         writel(0, &regs->control);
52 }
53
54 static void at91_stop_hc(struct platform_device *pdev)
55 {
56         struct usb_hcd *hcd = platform_get_drvdata(pdev);
57         struct ohci_regs __iomem *regs = hcd->regs;
58
59         dev_dbg(&pdev->dev, "stop\n");
60
61         /*
62          * Put the USB host controller into reset.
63          */
64         writel(0, &regs->control);
65
66         /*
67          * Stop the USB clocks.
68          */
69         clk_disable(fclk);
70         clk_disable(iclk);
71         clocked = 0;
72 }
73
74
75 /*-------------------------------------------------------------------------*/
76
77 static int usb_hcd_at91_remove (struct usb_hcd *, struct platform_device *);
78
79 /* configure so an HC device and id are always provided */
80 /* always called with process context; sleeping is OK */
81
82
83 /**
84  * usb_hcd_at91_probe - initialize AT91-based HCDs
85  * Context: !in_interrupt()
86  *
87  * Allocates basic resources for this USB host controller, and
88  * then invokes the start() method for the HCD associated with it
89  * through the hotplug entry's driver_data.
90  */
91 static int usb_hcd_at91_probe(const struct hc_driver *driver,
92                         struct platform_device *pdev)
93 {
94         int retval;
95         struct usb_hcd *hcd = NULL;
96
97         if (pdev->num_resources != 2) {
98                 pr_debug("hcd probe: invalid num_resources");
99                 return -ENODEV;
100         }
101
102         if ((pdev->resource[0].flags != IORESOURCE_MEM)
103                         || (pdev->resource[1].flags != IORESOURCE_IRQ)) {
104                 pr_debug("hcd probe: invalid resource type\n");
105                 return -ENODEV;
106         }
107
108         hcd = usb_create_hcd(driver, &pdev->dev, "at91");
109         if (!hcd)
110                 return -ENOMEM;
111         hcd->rsrc_start = pdev->resource[0].start;
112         hcd->rsrc_len = pdev->resource[0].end - pdev->resource[0].start + 1;
113
114         if (!request_mem_region(hcd->rsrc_start, hcd->rsrc_len, hcd_name)) {
115                 pr_debug("request_mem_region failed\n");
116                 retval = -EBUSY;
117                 goto err1;
118         }
119
120         hcd->regs = ioremap(hcd->rsrc_start, hcd->rsrc_len);
121         if (!hcd->regs) {
122                 pr_debug("ioremap failed\n");
123                 retval = -EIO;
124                 goto err2;
125         }
126
127         iclk = clk_get(&pdev->dev, "ohci_clk");
128         fclk = clk_get(&pdev->dev, "uhpck");
129
130         at91_start_hc(pdev);
131         ohci_hcd_init(hcd_to_ohci(hcd));
132
133         retval = usb_add_hcd(hcd, pdev->resource[1].start, IRQF_DISABLED);
134         if (retval == 0)
135                 return retval;
136
137         /* Error handling */
138         at91_stop_hc(pdev);
139
140         clk_put(fclk);
141         clk_put(iclk);
142
143         iounmap(hcd->regs);
144
145  err2:
146         release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
147
148  err1:
149         usb_put_hcd(hcd);
150         return retval;
151 }
152
153
154 /* may be called with controller, bus, and devices active */
155
156 /**
157  * usb_hcd_at91_remove - shutdown processing for AT91-based HCDs
158  * @dev: USB Host Controller being removed
159  * Context: !in_interrupt()
160  *
161  * Reverses the effect of usb_hcd_at91_probe(), first invoking
162  * the HCD's stop() method.  It is always called from a thread
163  * context, "rmmod" or something similar.
164  *
165  */
166 static int usb_hcd_at91_remove(struct usb_hcd *hcd,
167                                 struct platform_device *pdev)
168 {
169         usb_remove_hcd(hcd);
170         at91_stop_hc(pdev);
171         iounmap(hcd->regs);
172         release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
173         disable_irq_wake(hcd->irq);
174
175         clk_put(fclk);
176         clk_put(iclk);
177         fclk = iclk = NULL;
178
179         dev_set_drvdata(&pdev->dev, NULL);
180         return 0;
181 }
182
183 /*-------------------------------------------------------------------------*/
184
185 static int __devinit
186 ohci_at91_start (struct usb_hcd *hcd)
187 {
188         struct at91_usbh_data   *board = hcd->self.controller->platform_data;
189         struct ohci_hcd         *ohci = hcd_to_ohci (hcd);
190         int                     ret;
191
192         if ((ret = ohci_init(ohci)) < 0)
193                 return ret;
194
195         ohci->num_ports = board->ports;
196
197         if ((ret = ohci_run(ohci)) < 0) {
198                 err("can't start %s", hcd->self.bus_name);
199                 ohci_stop(hcd);
200                 return ret;
201         }
202         return 0;
203 }
204
205 /*-------------------------------------------------------------------------*/
206
207 static const struct hc_driver ohci_at91_hc_driver = {
208         .description =          hcd_name,
209         .product_desc =         "AT91 OHCI",
210         .hcd_priv_size =        sizeof(struct ohci_hcd),
211
212         /*
213          * generic hardware linkage
214          */
215         .irq =                  ohci_irq,
216         .flags =                HCD_USB11 | HCD_MEMORY,
217
218         /*
219          * basic lifecycle operations
220          */
221         .start =                ohci_at91_start,
222         .stop =                 ohci_stop,
223         .shutdown =             ohci_shutdown,
224
225         /*
226          * managing i/o requests and associated device resources
227          */
228         .urb_enqueue =          ohci_urb_enqueue,
229         .urb_dequeue =          ohci_urb_dequeue,
230         .endpoint_disable =     ohci_endpoint_disable,
231
232         /*
233          * scheduling support
234          */
235         .get_frame_number =     ohci_get_frame,
236
237         /*
238          * root hub support
239          */
240         .hub_status_data =      ohci_hub_status_data,
241         .hub_control =          ohci_hub_control,
242         .hub_irq_enable =       ohci_rhsc_enable,
243 #ifdef CONFIG_PM
244         .bus_suspend =          ohci_bus_suspend,
245         .bus_resume =           ohci_bus_resume,
246 #endif
247         .start_port_reset =     ohci_start_port_reset,
248 };
249
250 /*-------------------------------------------------------------------------*/
251
252 static int ohci_hcd_at91_drv_probe(struct platform_device *pdev)
253 {
254         device_init_wakeup(&pdev->dev, 1);
255         return usb_hcd_at91_probe(&ohci_at91_hc_driver, pdev);
256 }
257
258 static int ohci_hcd_at91_drv_remove(struct platform_device *pdev)
259 {
260         device_init_wakeup(&pdev->dev, 0);
261         return usb_hcd_at91_remove(platform_get_drvdata(pdev), pdev);
262 }
263
264 #ifdef CONFIG_PM
265
266 static int
267 ohci_hcd_at91_drv_suspend(struct platform_device *pdev, pm_message_t mesg)
268 {
269         struct usb_hcd  *hcd = platform_get_drvdata(pdev);
270         struct ohci_hcd *ohci = hcd_to_ohci(hcd);
271
272         if (device_may_wakeup(&pdev->dev))
273                 enable_irq_wake(hcd->irq);
274         else
275                 disable_irq_wake(hcd->irq);
276
277         /*
278          * The integrated transceivers seem unable to notice disconnect,
279          * reconnect, or wakeup without the 48 MHz clock active.  so for
280          * correctness, always discard connection state (using reset).
281          *
282          * REVISIT: some boards will be able to turn VBUS off...
283          */
284         if (at91_suspend_entering_slow_clock()) {
285                 ohci_usb_reset (ohci);
286                 clk_disable(fclk);
287                 clk_disable(iclk);
288                 clocked = 0;
289         }
290
291         return 0;
292 }
293
294 static int ohci_hcd_at91_drv_resume(struct platform_device *pdev)
295 {
296         if (!clocked) {
297                 clk_enable(iclk);
298                 clk_enable(fclk);
299                 clocked = 1;
300         }
301
302         return 0;
303 }
304 #else
305 #define ohci_hcd_at91_drv_suspend NULL
306 #define ohci_hcd_at91_drv_resume  NULL
307 #endif
308
309 MODULE_ALIAS("at91_ohci");
310
311 static struct platform_driver ohci_hcd_at91_driver = {
312         .probe          = ohci_hcd_at91_drv_probe,
313         .remove         = ohci_hcd_at91_drv_remove,
314         .shutdown       = usb_hcd_platform_shutdown,
315         .suspend        = ohci_hcd_at91_drv_suspend,
316         .resume         = ohci_hcd_at91_drv_resume,
317         .driver         = {
318                 .name   = "at91_ohci",
319                 .owner  = THIS_MODULE,
320         },
321 };
322
323 static int __init ohci_hcd_at91_init (void)
324 {
325         if (usb_disabled())
326                 return -ENODEV;
327
328         return platform_driver_register(&ohci_hcd_at91_driver);
329 }
330
331 static void __exit ohci_hcd_at91_cleanup (void)
332 {
333         platform_driver_unregister(&ohci_hcd_at91_driver);
334 }
335
336 module_init (ohci_hcd_at91_init);
337 module_exit (ohci_hcd_at91_cleanup);