Merge branch 'master' of /repos/git/net-2.6
[linux-2.6] / drivers / acpi / acpica / exoparg2.c
1 /******************************************************************************
2  *
3  * Module Name: exoparg2 - AML execution - opcodes with 2 arguments
4  *
5  *****************************************************************************/
6
7 /*
8  * Copyright (C) 2000 - 2008, Intel Corp.
9  * All rights reserved.
10  *
11  * Redistribution and use in source and binary forms, with or without
12  * modification, are permitted provided that the following conditions
13  * are met:
14  * 1. Redistributions of source code must retain the above copyright
15  *    notice, this list of conditions, and the following disclaimer,
16  *    without modification.
17  * 2. Redistributions in binary form must reproduce at minimum a disclaimer
18  *    substantially similar to the "NO WARRANTY" disclaimer below
19  *    ("Disclaimer") and any redistribution must be conditioned upon
20  *    including a substantially similar Disclaimer requirement for further
21  *    binary redistribution.
22  * 3. Neither the names of the above-listed copyright holders nor the names
23  *    of any contributors may be used to endorse or promote products derived
24  *    from this software without specific prior written permission.
25  *
26  * Alternatively, this software may be distributed under the terms of the
27  * GNU General Public License ("GPL") version 2 as published by the Free
28  * Software Foundation.
29  *
30  * NO WARRANTY
31  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
32  * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
33  * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
34  * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
35  * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
36  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
37  * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
38  * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
39  * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
40  * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
41  * POSSIBILITY OF SUCH DAMAGES.
42  */
43
44 #include <acpi/acpi.h>
45 #include "accommon.h"
46 #include "acparser.h"
47 #include "acinterp.h"
48 #include "acevents.h"
49 #include "amlcode.h"
50
51 #define _COMPONENT          ACPI_EXECUTER
52 ACPI_MODULE_NAME("exoparg2")
53
54 /*!
55  * Naming convention for AML interpreter execution routines.
56  *
57  * The routines that begin execution of AML opcodes are named with a common
58  * convention based upon the number of arguments, the number of target operands,
59  * and whether or not a value is returned:
60  *
61  *      AcpiExOpcode_xA_yT_zR
62  *
63  * Where:
64  *
65  * xA - ARGUMENTS:    The number of arguments (input operands) that are
66  *                    required for this opcode type (1 through 6 args).
67  * yT - TARGETS:      The number of targets (output operands) that are required
68  *                    for this opcode type (0, 1, or 2 targets).
69  * zR - RETURN VALUE: Indicates whether this opcode type returns a value
70  *                    as the function return (0 or 1).
71  *
72  * The AcpiExOpcode* functions are called via the Dispatcher component with
73  * fully resolved operands.
74 !*/
75 /*******************************************************************************
76  *
77  * FUNCTION:    acpi_ex_opcode_2A_0T_0R
78  *
79  * PARAMETERS:  walk_state          - Current walk state
80  *
81  * RETURN:      Status
82  *
83  * DESCRIPTION: Execute opcode with two arguments, no target, and no return
84  *              value.
85  *
86  * ALLOCATION:  Deletes both operands
87  *
88  ******************************************************************************/
89 acpi_status acpi_ex_opcode_2A_0T_0R(struct acpi_walk_state *walk_state)
90 {
91         union acpi_operand_object **operand = &walk_state->operands[0];
92         struct acpi_namespace_node *node;
93         u32 value;
94         acpi_status status = AE_OK;
95
96         ACPI_FUNCTION_TRACE_STR(ex_opcode_2A_0T_0R,
97                                 acpi_ps_get_opcode_name(walk_state->opcode));
98
99         /* Examine the opcode */
100
101         switch (walk_state->opcode) {
102         case AML_NOTIFY_OP:     /* Notify (notify_object, notify_value) */
103
104                 /* The first operand is a namespace node */
105
106                 node = (struct acpi_namespace_node *)operand[0];
107
108                 /* Second value is the notify value */
109
110                 value = (u32) operand[1]->integer.value;
111
112                 /* Are notifies allowed on this object? */
113
114                 if (!acpi_ev_is_notify_object(node)) {
115                         ACPI_ERROR((AE_INFO,
116                                     "Unexpected notify object type [%s]",
117                                     acpi_ut_get_type_name(node->type)));
118
119                         status = AE_AML_OPERAND_TYPE;
120                         break;
121                 }
122 #ifdef ACPI_GPE_NOTIFY_CHECK
123                 /*
124                  * GPE method wake/notify check.  Here, we want to ensure that we
125                  * don't receive any "DeviceWake" Notifies from a GPE _Lxx or _Exx
126                  * GPE method during system runtime.  If we do, the GPE is marked
127                  * as "wake-only" and disabled.
128                  *
129                  * 1) Is the Notify() value == device_wake?
130                  * 2) Is this a GPE deferred method?  (An _Lxx or _Exx method)
131                  * 3) Did the original GPE happen at system runtime?
132                  *    (versus during wake)
133                  *
134                  * If all three cases are true, this is a wake-only GPE that should
135                  * be disabled at runtime.
136                  */
137                 if (value == 2) {       /* device_wake */
138                         status =
139                             acpi_ev_check_for_wake_only_gpe(walk_state->
140                                                             gpe_event_info);
141                         if (ACPI_FAILURE(status)) {
142
143                                 /* AE_WAKE_ONLY_GPE only error, means ignore this notify */
144
145                                 return_ACPI_STATUS(AE_OK)
146                         }
147                 }
148 #endif
149
150                 /*
151                  * Dispatch the notify to the appropriate handler
152                  * NOTE: the request is queued for execution after this method
153                  * completes.  The notify handlers are NOT invoked synchronously
154                  * from this thread -- because handlers may in turn run other
155                  * control methods.
156                  */
157                 status = acpi_ev_queue_notify_request(node, value);
158                 break;
159
160         default:
161
162                 ACPI_ERROR((AE_INFO, "Unknown AML opcode %X",
163                             walk_state->opcode));
164                 status = AE_AML_BAD_OPCODE;
165         }
166
167         return_ACPI_STATUS(status);
168 }
169
170 /*******************************************************************************
171  *
172  * FUNCTION:    acpi_ex_opcode_2A_2T_1R
173  *
174  * PARAMETERS:  walk_state          - Current walk state
175  *
176  * RETURN:      Status
177  *
178  * DESCRIPTION: Execute a dyadic operator (2 operands) with 2 output targets
179  *              and one implicit return value.
180  *
181  ******************************************************************************/
182
183 acpi_status acpi_ex_opcode_2A_2T_1R(struct acpi_walk_state *walk_state)
184 {
185         union acpi_operand_object **operand = &walk_state->operands[0];
186         union acpi_operand_object *return_desc1 = NULL;
187         union acpi_operand_object *return_desc2 = NULL;
188         acpi_status status;
189
190         ACPI_FUNCTION_TRACE_STR(ex_opcode_2A_2T_1R,
191                                 acpi_ps_get_opcode_name(walk_state->opcode));
192
193         /* Execute the opcode */
194
195         switch (walk_state->opcode) {
196         case AML_DIVIDE_OP:
197
198                 /* Divide (Dividend, Divisor, remainder_result quotient_result) */
199
200                 return_desc1 =
201                     acpi_ut_create_internal_object(ACPI_TYPE_INTEGER);
202                 if (!return_desc1) {
203                         status = AE_NO_MEMORY;
204                         goto cleanup;
205                 }
206
207                 return_desc2 =
208                     acpi_ut_create_internal_object(ACPI_TYPE_INTEGER);
209                 if (!return_desc2) {
210                         status = AE_NO_MEMORY;
211                         goto cleanup;
212                 }
213
214                 /* Quotient to return_desc1, remainder to return_desc2 */
215
216                 status = acpi_ut_divide(operand[0]->integer.value,
217                                         operand[1]->integer.value,
218                                         &return_desc1->integer.value,
219                                         &return_desc2->integer.value);
220                 if (ACPI_FAILURE(status)) {
221                         goto cleanup;
222                 }
223                 break;
224
225         default:
226
227                 ACPI_ERROR((AE_INFO, "Unknown AML opcode %X",
228                             walk_state->opcode));
229                 status = AE_AML_BAD_OPCODE;
230                 goto cleanup;
231         }
232
233         /* Store the results to the target reference operands */
234
235         status = acpi_ex_store(return_desc2, operand[2], walk_state);
236         if (ACPI_FAILURE(status)) {
237                 goto cleanup;
238         }
239
240         status = acpi_ex_store(return_desc1, operand[3], walk_state);
241         if (ACPI_FAILURE(status)) {
242                 goto cleanup;
243         }
244
245       cleanup:
246         /*
247          * Since the remainder is not returned indirectly, remove a reference to
248          * it. Only the quotient is returned indirectly.
249          */
250         acpi_ut_remove_reference(return_desc2);
251
252         if (ACPI_FAILURE(status)) {
253
254                 /* Delete the return object */
255
256                 acpi_ut_remove_reference(return_desc1);
257         }
258
259         /* Save return object (the remainder) on success */
260
261         else {
262                 walk_state->result_obj = return_desc1;
263         }
264
265         return_ACPI_STATUS(status);
266 }
267
268 /*******************************************************************************
269  *
270  * FUNCTION:    acpi_ex_opcode_2A_1T_1R
271  *
272  * PARAMETERS:  walk_state          - Current walk state
273  *
274  * RETURN:      Status
275  *
276  * DESCRIPTION: Execute opcode with two arguments, one target, and a return
277  *              value.
278  *
279  ******************************************************************************/
280
281 acpi_status acpi_ex_opcode_2A_1T_1R(struct acpi_walk_state *walk_state)
282 {
283         union acpi_operand_object **operand = &walk_state->operands[0];
284         union acpi_operand_object *return_desc = NULL;
285         acpi_integer index;
286         acpi_status status = AE_OK;
287         acpi_size length;
288
289         ACPI_FUNCTION_TRACE_STR(ex_opcode_2A_1T_1R,
290                                 acpi_ps_get_opcode_name(walk_state->opcode));
291
292         /* Execute the opcode */
293
294         if (walk_state->op_info->flags & AML_MATH) {
295
296                 /* All simple math opcodes (add, etc.) */
297
298                 return_desc = acpi_ut_create_internal_object(ACPI_TYPE_INTEGER);
299                 if (!return_desc) {
300                         status = AE_NO_MEMORY;
301                         goto cleanup;
302                 }
303
304                 return_desc->integer.value =
305                     acpi_ex_do_math_op(walk_state->opcode,
306                                        operand[0]->integer.value,
307                                        operand[1]->integer.value);
308                 goto store_result_to_target;
309         }
310
311         switch (walk_state->opcode) {
312         case AML_MOD_OP:        /* Mod (Dividend, Divisor, remainder_result (ACPI 2.0) */
313
314                 return_desc = acpi_ut_create_internal_object(ACPI_TYPE_INTEGER);
315                 if (!return_desc) {
316                         status = AE_NO_MEMORY;
317                         goto cleanup;
318                 }
319
320                 /* return_desc will contain the remainder */
321
322                 status = acpi_ut_divide(operand[0]->integer.value,
323                                         operand[1]->integer.value,
324                                         NULL, &return_desc->integer.value);
325                 break;
326
327         case AML_CONCAT_OP:     /* Concatenate (Data1, Data2, Result) */
328
329                 status = acpi_ex_do_concatenate(operand[0], operand[1],
330                                                 &return_desc, walk_state);
331                 break;
332
333         case AML_TO_STRING_OP:  /* to_string (Buffer, Length, Result) (ACPI 2.0) */
334
335                 /*
336                  * Input object is guaranteed to be a buffer at this point (it may have
337                  * been converted.)  Copy the raw buffer data to a new object of
338                  * type String.
339                  */
340
341                 /*
342                  * Get the length of the new string. It is the smallest of:
343                  * 1) Length of the input buffer
344                  * 2) Max length as specified in the to_string operator
345                  * 3) Length of input buffer up to a zero byte (null terminator)
346                  *
347                  * NOTE: A length of zero is ok, and will create a zero-length, null
348                  *       terminated string.
349                  */
350                 length = 0;
351                 while ((length < operand[0]->buffer.length) &&
352                        (length < operand[1]->integer.value) &&
353                        (operand[0]->buffer.pointer[length])) {
354                         length++;
355                 }
356
357                 /* Allocate a new string object */
358
359                 return_desc = acpi_ut_create_string_object(length);
360                 if (!return_desc) {
361                         status = AE_NO_MEMORY;
362                         goto cleanup;
363                 }
364
365                 /*
366                  * Copy the raw buffer data with no transform.
367                  * (NULL terminated already)
368                  */
369                 ACPI_MEMCPY(return_desc->string.pointer,
370                             operand[0]->buffer.pointer, length);
371                 break;
372
373         case AML_CONCAT_RES_OP:
374
375                 /* concatenate_res_template (Buffer, Buffer, Result) (ACPI 2.0) */
376
377                 status = acpi_ex_concat_template(operand[0], operand[1],
378                                                  &return_desc, walk_state);
379                 break;
380
381         case AML_INDEX_OP:      /* Index (Source Index Result) */
382
383                 /* Create the internal return object */
384
385                 return_desc =
386                     acpi_ut_create_internal_object(ACPI_TYPE_LOCAL_REFERENCE);
387                 if (!return_desc) {
388                         status = AE_NO_MEMORY;
389                         goto cleanup;
390                 }
391
392                 /* Initialize the Index reference object */
393
394                 index = operand[1]->integer.value;
395                 return_desc->reference.value = (u32) index;
396                 return_desc->reference.class = ACPI_REFCLASS_INDEX;
397
398                 /*
399                  * At this point, the Source operand is a String, Buffer, or Package.
400                  * Verify that the index is within range.
401                  */
402                 switch (ACPI_GET_OBJECT_TYPE(operand[0])) {
403                 case ACPI_TYPE_STRING:
404
405                         if (index >= operand[0]->string.length) {
406                                 status = AE_AML_STRING_LIMIT;
407                         }
408
409                         return_desc->reference.target_type =
410                             ACPI_TYPE_BUFFER_FIELD;
411                         break;
412
413                 case ACPI_TYPE_BUFFER:
414
415                         if (index >= operand[0]->buffer.length) {
416                                 status = AE_AML_BUFFER_LIMIT;
417                         }
418
419                         return_desc->reference.target_type =
420                             ACPI_TYPE_BUFFER_FIELD;
421                         break;
422
423                 case ACPI_TYPE_PACKAGE:
424
425                         if (index >= operand[0]->package.count) {
426                                 status = AE_AML_PACKAGE_LIMIT;
427                         }
428
429                         return_desc->reference.target_type = ACPI_TYPE_PACKAGE;
430                         return_desc->reference.where =
431                             &operand[0]->package.elements[index];
432                         break;
433
434                 default:
435
436                         status = AE_AML_INTERNAL;
437                         goto cleanup;
438                 }
439
440                 /* Failure means that the Index was beyond the end of the object */
441
442                 if (ACPI_FAILURE(status)) {
443                         ACPI_EXCEPTION((AE_INFO, status,
444                                         "Index (%X%8.8X) is beyond end of object",
445                                         ACPI_FORMAT_UINT64(index)));
446                         goto cleanup;
447                 }
448
449                 /*
450                  * Save the target object and add a reference to it for the life
451                  * of the index
452                  */
453                 return_desc->reference.object = operand[0];
454                 acpi_ut_add_reference(operand[0]);
455
456                 /* Store the reference to the Target */
457
458                 status = acpi_ex_store(return_desc, operand[2], walk_state);
459
460                 /* Return the reference */
461
462                 walk_state->result_obj = return_desc;
463                 goto cleanup;
464
465         default:
466
467                 ACPI_ERROR((AE_INFO, "Unknown AML opcode %X",
468                             walk_state->opcode));
469                 status = AE_AML_BAD_OPCODE;
470                 break;
471         }
472
473       store_result_to_target:
474
475         if (ACPI_SUCCESS(status)) {
476                 /*
477                  * Store the result of the operation (which is now in return_desc) into
478                  * the Target descriptor.
479                  */
480                 status = acpi_ex_store(return_desc, operand[2], walk_state);
481                 if (ACPI_FAILURE(status)) {
482                         goto cleanup;
483                 }
484
485                 if (!walk_state->result_obj) {
486                         walk_state->result_obj = return_desc;
487                 }
488         }
489
490       cleanup:
491
492         /* Delete return object on error */
493
494         if (ACPI_FAILURE(status)) {
495                 acpi_ut_remove_reference(return_desc);
496                 walk_state->result_obj = NULL;
497         }
498
499         return_ACPI_STATUS(status);
500 }
501
502 /*******************************************************************************
503  *
504  * FUNCTION:    acpi_ex_opcode_2A_0T_1R
505  *
506  * PARAMETERS:  walk_state          - Current walk state
507  *
508  * RETURN:      Status
509  *
510  * DESCRIPTION: Execute opcode with 2 arguments, no target, and a return value
511  *
512  ******************************************************************************/
513
514 acpi_status acpi_ex_opcode_2A_0T_1R(struct acpi_walk_state *walk_state)
515 {
516         union acpi_operand_object **operand = &walk_state->operands[0];
517         union acpi_operand_object *return_desc = NULL;
518         acpi_status status = AE_OK;
519         u8 logical_result = FALSE;
520
521         ACPI_FUNCTION_TRACE_STR(ex_opcode_2A_0T_1R,
522                                 acpi_ps_get_opcode_name(walk_state->opcode));
523
524         /* Create the internal return object */
525
526         return_desc = acpi_ut_create_internal_object(ACPI_TYPE_INTEGER);
527         if (!return_desc) {
528                 status = AE_NO_MEMORY;
529                 goto cleanup;
530         }
531
532         /* Execute the Opcode */
533
534         if (walk_state->op_info->flags & AML_LOGICAL_NUMERIC) {
535
536                 /* logical_op (Operand0, Operand1) */
537
538                 status = acpi_ex_do_logical_numeric_op(walk_state->opcode,
539                                                        operand[0]->integer.
540                                                        value,
541                                                        operand[1]->integer.
542                                                        value, &logical_result);
543                 goto store_logical_result;
544         } else if (walk_state->op_info->flags & AML_LOGICAL) {
545
546                 /* logical_op (Operand0, Operand1) */
547
548                 status = acpi_ex_do_logical_op(walk_state->opcode, operand[0],
549                                                operand[1], &logical_result);
550                 goto store_logical_result;
551         }
552
553         switch (walk_state->opcode) {
554         case AML_ACQUIRE_OP:    /* Acquire (mutex_object, Timeout) */
555
556                 status =
557                     acpi_ex_acquire_mutex(operand[1], operand[0], walk_state);
558                 if (status == AE_TIME) {
559                         logical_result = TRUE;  /* TRUE = Acquire timed out */
560                         status = AE_OK;
561                 }
562                 break;
563
564         case AML_WAIT_OP:       /* Wait (event_object, Timeout) */
565
566                 status = acpi_ex_system_wait_event(operand[1], operand[0]);
567                 if (status == AE_TIME) {
568                         logical_result = TRUE;  /* TRUE, Wait timed out */
569                         status = AE_OK;
570                 }
571                 break;
572
573         default:
574
575                 ACPI_ERROR((AE_INFO, "Unknown AML opcode %X",
576                             walk_state->opcode));
577                 status = AE_AML_BAD_OPCODE;
578                 goto cleanup;
579         }
580
581       store_logical_result:
582         /*
583          * Set return value to according to logical_result. logical TRUE (all ones)
584          * Default is FALSE (zero)
585          */
586         if (logical_result) {
587                 return_desc->integer.value = ACPI_INTEGER_MAX;
588         }
589
590       cleanup:
591
592         /* Delete return object on error */
593
594         if (ACPI_FAILURE(status)) {
595                 acpi_ut_remove_reference(return_desc);
596         }
597
598         /* Save return object on success */
599
600         else {
601                 walk_state->result_obj = return_desc;
602         }
603
604         return_ACPI_STATUS(status);
605 }