1 /* $Id: pci_sabre.c,v 1.42 2002/01/23 11:27:32 davem Exp $
2 * pci_sabre.c: Sabre specific PCI controller support.
4 * Copyright (C) 1997, 1998, 1999 David S. Miller (davem@caipfs.rutgers.edu)
5 * Copyright (C) 1998, 1999 Eddie C. Dost (ecd@skynet.be)
6 * Copyright (C) 1999 Jakub Jelinek (jakub@redhat.com)
9 #include <linux/kernel.h>
10 #include <linux/types.h>
11 #include <linux/pci.h>
12 #include <linux/init.h>
13 #include <linux/slab.h>
14 #include <linux/interrupt.h>
18 #include <asm/iommu.h>
21 #include <asm/oplib.h>
24 #include "iommu_common.h"
26 /* All SABRE registers are 64-bits. The following accessor
27 * routines are how they are accessed. The REG parameter
28 * is a physical address.
30 #define sabre_read(__reg) \
32 __asm__ __volatile__("ldxa [%1] %2, %0" \
34 : "r" (__reg), "i" (ASI_PHYS_BYPASS_EC_E) \
38 #define sabre_write(__reg, __val) \
39 __asm__ __volatile__("stxa %0, [%1] %2" \
41 : "r" (__val), "r" (__reg), \
42 "i" (ASI_PHYS_BYPASS_EC_E) \
45 /* SABRE PCI controller register offsets and definitions. */
46 #define SABRE_UE_AFSR 0x0030UL
47 #define SABRE_UEAFSR_PDRD 0x4000000000000000UL /* Primary PCI DMA Read */
48 #define SABRE_UEAFSR_PDWR 0x2000000000000000UL /* Primary PCI DMA Write */
49 #define SABRE_UEAFSR_SDRD 0x0800000000000000UL /* Secondary PCI DMA Read */
50 #define SABRE_UEAFSR_SDWR 0x0400000000000000UL /* Secondary PCI DMA Write */
51 #define SABRE_UEAFSR_SDTE 0x0200000000000000UL /* Secondary DMA Translation Error */
52 #define SABRE_UEAFSR_PDTE 0x0100000000000000UL /* Primary DMA Translation Error */
53 #define SABRE_UEAFSR_BMSK 0x0000ffff00000000UL /* Bytemask */
54 #define SABRE_UEAFSR_OFF 0x00000000e0000000UL /* Offset (AFAR bits [5:3] */
55 #define SABRE_UEAFSR_BLK 0x0000000000800000UL /* Was block operation */
56 #define SABRE_UECE_AFAR 0x0038UL
57 #define SABRE_CE_AFSR 0x0040UL
58 #define SABRE_CEAFSR_PDRD 0x4000000000000000UL /* Primary PCI DMA Read */
59 #define SABRE_CEAFSR_PDWR 0x2000000000000000UL /* Primary PCI DMA Write */
60 #define SABRE_CEAFSR_SDRD 0x0800000000000000UL /* Secondary PCI DMA Read */
61 #define SABRE_CEAFSR_SDWR 0x0400000000000000UL /* Secondary PCI DMA Write */
62 #define SABRE_CEAFSR_ESYND 0x00ff000000000000UL /* ECC Syndrome */
63 #define SABRE_CEAFSR_BMSK 0x0000ffff00000000UL /* Bytemask */
64 #define SABRE_CEAFSR_OFF 0x00000000e0000000UL /* Offset */
65 #define SABRE_CEAFSR_BLK 0x0000000000800000UL /* Was block operation */
66 #define SABRE_UECE_AFAR_ALIAS 0x0048UL /* Aliases to 0x0038 */
67 #define SABRE_IOMMU_CONTROL 0x0200UL
68 #define SABRE_IOMMUCTRL_ERRSTS 0x0000000006000000UL /* Error status bits */
69 #define SABRE_IOMMUCTRL_ERR 0x0000000001000000UL /* Error present in IOTLB */
70 #define SABRE_IOMMUCTRL_LCKEN 0x0000000000800000UL /* IOTLB lock enable */
71 #define SABRE_IOMMUCTRL_LCKPTR 0x0000000000780000UL /* IOTLB lock pointer */
72 #define SABRE_IOMMUCTRL_TSBSZ 0x0000000000070000UL /* TSB Size */
73 #define SABRE_IOMMU_TSBSZ_1K 0x0000000000000000
74 #define SABRE_IOMMU_TSBSZ_2K 0x0000000000010000
75 #define SABRE_IOMMU_TSBSZ_4K 0x0000000000020000
76 #define SABRE_IOMMU_TSBSZ_8K 0x0000000000030000
77 #define SABRE_IOMMU_TSBSZ_16K 0x0000000000040000
78 #define SABRE_IOMMU_TSBSZ_32K 0x0000000000050000
79 #define SABRE_IOMMU_TSBSZ_64K 0x0000000000060000
80 #define SABRE_IOMMU_TSBSZ_128K 0x0000000000070000
81 #define SABRE_IOMMUCTRL_TBWSZ 0x0000000000000004UL /* TSB assumed page size */
82 #define SABRE_IOMMUCTRL_DENAB 0x0000000000000002UL /* Diagnostic Mode Enable */
83 #define SABRE_IOMMUCTRL_ENAB 0x0000000000000001UL /* IOMMU Enable */
84 #define SABRE_IOMMU_TSBBASE 0x0208UL
85 #define SABRE_IOMMU_FLUSH 0x0210UL
86 #define SABRE_IMAP_A_SLOT0 0x0c00UL
87 #define SABRE_IMAP_B_SLOT0 0x0c20UL
88 #define SABRE_IMAP_SCSI 0x1000UL
89 #define SABRE_IMAP_ETH 0x1008UL
90 #define SABRE_IMAP_BPP 0x1010UL
91 #define SABRE_IMAP_AU_REC 0x1018UL
92 #define SABRE_IMAP_AU_PLAY 0x1020UL
93 #define SABRE_IMAP_PFAIL 0x1028UL
94 #define SABRE_IMAP_KMS 0x1030UL
95 #define SABRE_IMAP_FLPY 0x1038UL
96 #define SABRE_IMAP_SHW 0x1040UL
97 #define SABRE_IMAP_KBD 0x1048UL
98 #define SABRE_IMAP_MS 0x1050UL
99 #define SABRE_IMAP_SER 0x1058UL
100 #define SABRE_IMAP_UE 0x1070UL
101 #define SABRE_IMAP_CE 0x1078UL
102 #define SABRE_IMAP_PCIERR 0x1080UL
103 #define SABRE_IMAP_GFX 0x1098UL
104 #define SABRE_IMAP_EUPA 0x10a0UL
105 #define SABRE_ICLR_A_SLOT0 0x1400UL
106 #define SABRE_ICLR_B_SLOT0 0x1480UL
107 #define SABRE_ICLR_SCSI 0x1800UL
108 #define SABRE_ICLR_ETH 0x1808UL
109 #define SABRE_ICLR_BPP 0x1810UL
110 #define SABRE_ICLR_AU_REC 0x1818UL
111 #define SABRE_ICLR_AU_PLAY 0x1820UL
112 #define SABRE_ICLR_PFAIL 0x1828UL
113 #define SABRE_ICLR_KMS 0x1830UL
114 #define SABRE_ICLR_FLPY 0x1838UL
115 #define SABRE_ICLR_SHW 0x1840UL
116 #define SABRE_ICLR_KBD 0x1848UL
117 #define SABRE_ICLR_MS 0x1850UL
118 #define SABRE_ICLR_SER 0x1858UL
119 #define SABRE_ICLR_UE 0x1870UL
120 #define SABRE_ICLR_CE 0x1878UL
121 #define SABRE_ICLR_PCIERR 0x1880UL
122 #define SABRE_WRSYNC 0x1c20UL
123 #define SABRE_PCICTRL 0x2000UL
124 #define SABRE_PCICTRL_MRLEN 0x0000001000000000UL /* Use MemoryReadLine for block loads/stores */
125 #define SABRE_PCICTRL_SERR 0x0000000400000000UL /* Set when SERR asserted on PCI bus */
126 #define SABRE_PCICTRL_ARBPARK 0x0000000000200000UL /* Bus Parking 0=Ultra-IIi 1=prev-bus-owner */
127 #define SABRE_PCICTRL_CPUPRIO 0x0000000000100000UL /* Ultra-IIi granted every other bus cycle */
128 #define SABRE_PCICTRL_ARBPRIO 0x00000000000f0000UL /* Slot which is granted every other bus cycle */
129 #define SABRE_PCICTRL_ERREN 0x0000000000000100UL /* PCI Error Interrupt Enable */
130 #define SABRE_PCICTRL_RTRYWE 0x0000000000000080UL /* DMA Flow Control 0=wait-if-possible 1=retry */
131 #define SABRE_PCICTRL_AEN 0x000000000000000fUL /* Slot PCI arbitration enables */
132 #define SABRE_PIOAFSR 0x2010UL
133 #define SABRE_PIOAFSR_PMA 0x8000000000000000UL /* Primary Master Abort */
134 #define SABRE_PIOAFSR_PTA 0x4000000000000000UL /* Primary Target Abort */
135 #define SABRE_PIOAFSR_PRTRY 0x2000000000000000UL /* Primary Excessive Retries */
136 #define SABRE_PIOAFSR_PPERR 0x1000000000000000UL /* Primary Parity Error */
137 #define SABRE_PIOAFSR_SMA 0x0800000000000000UL /* Secondary Master Abort */
138 #define SABRE_PIOAFSR_STA 0x0400000000000000UL /* Secondary Target Abort */
139 #define SABRE_PIOAFSR_SRTRY 0x0200000000000000UL /* Secondary Excessive Retries */
140 #define SABRE_PIOAFSR_SPERR 0x0100000000000000UL /* Secondary Parity Error */
141 #define SABRE_PIOAFSR_BMSK 0x0000ffff00000000UL /* Byte Mask */
142 #define SABRE_PIOAFSR_BLK 0x0000000080000000UL /* Was Block Operation */
143 #define SABRE_PIOAFAR 0x2018UL
144 #define SABRE_PCIDIAG 0x2020UL
145 #define SABRE_PCIDIAG_DRTRY 0x0000000000000040UL /* Disable PIO Retry Limit */
146 #define SABRE_PCIDIAG_IPAPAR 0x0000000000000008UL /* Invert PIO Address Parity */
147 #define SABRE_PCIDIAG_IPDPAR 0x0000000000000004UL /* Invert PIO Data Parity */
148 #define SABRE_PCIDIAG_IDDPAR 0x0000000000000002UL /* Invert DMA Data Parity */
149 #define SABRE_PCIDIAG_ELPBK 0x0000000000000001UL /* Loopback Enable - not supported */
150 #define SABRE_PCITASR 0x2028UL
151 #define SABRE_PCITASR_EF 0x0000000000000080UL /* Respond to 0xe0000000-0xffffffff */
152 #define SABRE_PCITASR_CD 0x0000000000000040UL /* Respond to 0xc0000000-0xdfffffff */
153 #define SABRE_PCITASR_AB 0x0000000000000020UL /* Respond to 0xa0000000-0xbfffffff */
154 #define SABRE_PCITASR_89 0x0000000000000010UL /* Respond to 0x80000000-0x9fffffff */
155 #define SABRE_PCITASR_67 0x0000000000000008UL /* Respond to 0x60000000-0x7fffffff */
156 #define SABRE_PCITASR_45 0x0000000000000004UL /* Respond to 0x40000000-0x5fffffff */
157 #define SABRE_PCITASR_23 0x0000000000000002UL /* Respond to 0x20000000-0x3fffffff */
158 #define SABRE_PCITASR_01 0x0000000000000001UL /* Respond to 0x00000000-0x1fffffff */
159 #define SABRE_PIOBUF_DIAG 0x5000UL
160 #define SABRE_DMABUF_DIAGLO 0x5100UL
161 #define SABRE_DMABUF_DIAGHI 0x51c0UL
162 #define SABRE_IMAP_GFX_ALIAS 0x6000UL /* Aliases to 0x1098 */
163 #define SABRE_IMAP_EUPA_ALIAS 0x8000UL /* Aliases to 0x10a0 */
164 #define SABRE_IOMMU_VADIAG 0xa400UL
165 #define SABRE_IOMMU_TCDIAG 0xa408UL
166 #define SABRE_IOMMU_TAG 0xa580UL
167 #define SABRE_IOMMUTAG_ERRSTS 0x0000000001800000UL /* Error status bits */
168 #define SABRE_IOMMUTAG_ERR 0x0000000000400000UL /* Error present */
169 #define SABRE_IOMMUTAG_WRITE 0x0000000000200000UL /* Page is writable */
170 #define SABRE_IOMMUTAG_STREAM 0x0000000000100000UL /* Streamable bit - unused */
171 #define SABRE_IOMMUTAG_SIZE 0x0000000000080000UL /* 0=8k 1=16k */
172 #define SABRE_IOMMUTAG_VPN 0x000000000007ffffUL /* Virtual Page Number [31:13] */
173 #define SABRE_IOMMU_DATA 0xa600UL
174 #define SABRE_IOMMUDATA_VALID 0x0000000040000000UL /* Valid */
175 #define SABRE_IOMMUDATA_USED 0x0000000020000000UL /* Used (for LRU algorithm) */
176 #define SABRE_IOMMUDATA_CACHE 0x0000000010000000UL /* Cacheable */
177 #define SABRE_IOMMUDATA_PPN 0x00000000001fffffUL /* Physical Page Number [33:13] */
178 #define SABRE_PCI_IRQSTATE 0xa800UL
179 #define SABRE_OBIO_IRQSTATE 0xa808UL
180 #define SABRE_FFBCFG 0xf000UL
181 #define SABRE_FFBCFG_SPRQS 0x000000000f000000 /* Slave P_RQST queue size */
182 #define SABRE_FFBCFG_ONEREAD 0x0000000000004000 /* Slave supports one outstanding read */
183 #define SABRE_MCCTRL0 0xf010UL
184 #define SABRE_MCCTRL0_RENAB 0x0000000080000000 /* Refresh Enable */
185 #define SABRE_MCCTRL0_EENAB 0x0000000010000000 /* Enable all ECC functions */
186 #define SABRE_MCCTRL0_11BIT 0x0000000000001000 /* Enable 11-bit column addressing */
187 #define SABRE_MCCTRL0_DPP 0x0000000000000f00 /* DIMM Pair Present Bits */
188 #define SABRE_MCCTRL0_RINTVL 0x00000000000000ff /* Refresh Interval */
189 #define SABRE_MCCTRL1 0xf018UL
190 #define SABRE_MCCTRL1_AMDC 0x0000000038000000 /* Advance Memdata Clock */
191 #define SABRE_MCCTRL1_ARDC 0x0000000007000000 /* Advance DRAM Read Data Clock */
192 #define SABRE_MCCTRL1_CSR 0x0000000000e00000 /* CAS to RAS delay for CBR refresh */
193 #define SABRE_MCCTRL1_CASRW 0x00000000001c0000 /* CAS length for read/write */
194 #define SABRE_MCCTRL1_RCD 0x0000000000038000 /* RAS to CAS delay */
195 #define SABRE_MCCTRL1_CP 0x0000000000007000 /* CAS Precharge */
196 #define SABRE_MCCTRL1_RP 0x0000000000000e00 /* RAS Precharge */
197 #define SABRE_MCCTRL1_RAS 0x00000000000001c0 /* Length of RAS for refresh */
198 #define SABRE_MCCTRL1_CASRW2 0x0000000000000038 /* Must be same as CASRW */
199 #define SABRE_MCCTRL1_RSC 0x0000000000000007 /* RAS after CAS hold time */
200 #define SABRE_RESETCTRL 0xf020UL
202 #define SABRE_CONFIGSPACE 0x001000000UL
203 #define SABRE_IOSPACE 0x002000000UL
204 #define SABRE_IOSPACE_SIZE 0x000ffffffUL
205 #define SABRE_MEMSPACE 0x100000000UL
206 #define SABRE_MEMSPACE_SIZE 0x07fffffffUL
208 /* UltraSparc-IIi Programmer's Manual, page 325, PCI
209 * configuration space address format:
211 * 32 24 23 16 15 11 10 8 7 2 1 0
212 * ---------------------------------------------------------
213 * |0 0 0 0 0 0 0 0 1| bus | device | function | reg | 0 0 |
214 * ---------------------------------------------------------
216 #define SABRE_CONFIG_BASE(PBM) \
217 ((PBM)->config_space | (1UL << 24))
218 #define SABRE_CONFIG_ENCODE(BUS, DEVFN, REG) \
219 (((unsigned long)(BUS) << 16) | \
220 ((unsigned long)(DEVFN) << 8) | \
221 ((unsigned long)(REG)))
223 static int hummingbird_p;
224 static struct pci_bus *sabre_root_bus;
226 static void *sabre_pci_config_mkaddr(struct pci_pbm_info *pbm,
234 (SABRE_CONFIG_BASE(pbm) |
235 SABRE_CONFIG_ENCODE(bus, devfn, where));
238 static int sabre_out_of_range(unsigned char devfn)
243 return (((PCI_SLOT(devfn) == 0) && (PCI_FUNC(devfn) > 0)) ||
244 ((PCI_SLOT(devfn) == 1) && (PCI_FUNC(devfn) > 1)) ||
245 (PCI_SLOT(devfn) > 1));
248 static int __sabre_out_of_range(struct pci_pbm_info *pbm,
255 return ((pbm->parent == 0) ||
256 ((pbm == &pbm->parent->pbm_B) &&
257 (bus == pbm->pci_first_busno) &&
258 PCI_SLOT(devfn) > 8) ||
259 ((pbm == &pbm->parent->pbm_A) &&
260 (bus == pbm->pci_first_busno) &&
261 PCI_SLOT(devfn) > 8));
264 static int __sabre_read_pci_cfg(struct pci_bus *bus_dev, unsigned int devfn,
265 int where, int size, u32 *value)
267 struct pci_pbm_info *pbm = bus_dev->sysdata;
268 unsigned char bus = bus_dev->number;
285 addr = sabre_pci_config_mkaddr(pbm, bus, devfn, where);
287 return PCIBIOS_SUCCESSFUL;
289 if (__sabre_out_of_range(pbm, bus, devfn))
290 return PCIBIOS_SUCCESSFUL;
294 pci_config_read8((u8 *) addr, &tmp8);
300 printk("pci_read_config_word: misaligned reg [%x]\n",
302 return PCIBIOS_SUCCESSFUL;
304 pci_config_read16((u16 *) addr, &tmp16);
310 printk("pci_read_config_dword: misaligned reg [%x]\n",
312 return PCIBIOS_SUCCESSFUL;
314 pci_config_read32(addr, value);
318 return PCIBIOS_SUCCESSFUL;
321 static int sabre_read_pci_cfg(struct pci_bus *bus, unsigned int devfn,
322 int where, int size, u32 *value)
324 if (!bus->number && sabre_out_of_range(devfn)) {
336 return PCIBIOS_SUCCESSFUL;
339 if (bus->number || PCI_SLOT(devfn))
340 return __sabre_read_pci_cfg(bus, devfn, where, size, value);
342 /* When accessing PCI config space of the PCI controller itself (bus
343 * 0, device slot 0, function 0) there are restrictions. Each
344 * register must be accessed as it's natural size. Thus, for example
345 * the Vendor ID must be accessed as a 16-bit quantity.
354 __sabre_read_pci_cfg(bus, devfn, where & ~1, 2, &tmp32);
359 *value = tmp16 & 0xff;
361 return __sabre_read_pci_cfg(bus, devfn, where, 1, value);
366 return __sabre_read_pci_cfg(bus, devfn, where, 2, value);
371 __sabre_read_pci_cfg(bus, devfn, where, 1, &tmp32);
374 __sabre_read_pci_cfg(bus, devfn, where + 1, 1, &tmp32);
384 sabre_read_pci_cfg(bus, devfn, where, 2, &tmp32);
387 sabre_read_pci_cfg(bus, devfn, where + 2, 2, &tmp32);
389 *value |= tmp16 << 16;
393 return PCIBIOS_SUCCESSFUL;
396 static int __sabre_write_pci_cfg(struct pci_bus *bus_dev, unsigned int devfn,
397 int where, int size, u32 value)
399 struct pci_pbm_info *pbm = bus_dev->sysdata;
400 unsigned char bus = bus_dev->number;
403 addr = sabre_pci_config_mkaddr(pbm, bus, devfn, where);
405 return PCIBIOS_SUCCESSFUL;
407 if (__sabre_out_of_range(pbm, bus, devfn))
408 return PCIBIOS_SUCCESSFUL;
412 pci_config_write8((u8 *) addr, value);
417 printk("pci_write_config_word: misaligned reg [%x]\n",
419 return PCIBIOS_SUCCESSFUL;
421 pci_config_write16((u16 *) addr, value);
426 printk("pci_write_config_dword: misaligned reg [%x]\n",
428 return PCIBIOS_SUCCESSFUL;
430 pci_config_write32(addr, value);
434 return PCIBIOS_SUCCESSFUL;
437 static int sabre_write_pci_cfg(struct pci_bus *bus, unsigned int devfn,
438 int where, int size, u32 value)
441 return __sabre_write_pci_cfg(bus, devfn, where, size, value);
443 if (sabre_out_of_range(devfn))
444 return PCIBIOS_SUCCESSFUL;
452 __sabre_read_pci_cfg(bus, devfn, where & ~1, 2, &tmp32);
462 return __sabre_write_pci_cfg(bus, devfn, where & ~1, 2, tmp32);
464 return __sabre_write_pci_cfg(bus, devfn, where, 1, value);
468 return __sabre_write_pci_cfg(bus, devfn, where, 2, value);
470 __sabre_write_pci_cfg(bus, devfn, where, 1, value & 0xff);
471 __sabre_write_pci_cfg(bus, devfn, where + 1, 1, value >> 8);
475 sabre_write_pci_cfg(bus, devfn, where, 2, value & 0xffff);
476 sabre_write_pci_cfg(bus, devfn, where + 2, 2, value >> 16);
479 return PCIBIOS_SUCCESSFUL;
482 static struct pci_ops sabre_ops = {
483 .read = sabre_read_pci_cfg,
484 .write = sabre_write_pci_cfg,
487 static unsigned long sabre_pcislot_imap_offset(unsigned long ino)
489 unsigned int bus = (ino & 0x10) >> 4;
490 unsigned int slot = (ino & 0x0c) >> 2;
493 return SABRE_IMAP_A_SLOT0 + (slot * 8);
495 return SABRE_IMAP_B_SLOT0 + (slot * 8);
498 static unsigned long __onboard_imap_off[] = {
499 /*0x20*/ SABRE_IMAP_SCSI,
500 /*0x21*/ SABRE_IMAP_ETH,
501 /*0x22*/ SABRE_IMAP_BPP,
502 /*0x23*/ SABRE_IMAP_AU_REC,
503 /*0x24*/ SABRE_IMAP_AU_PLAY,
504 /*0x25*/ SABRE_IMAP_PFAIL,
505 /*0x26*/ SABRE_IMAP_KMS,
506 /*0x27*/ SABRE_IMAP_FLPY,
507 /*0x28*/ SABRE_IMAP_SHW,
508 /*0x29*/ SABRE_IMAP_KBD,
509 /*0x2a*/ SABRE_IMAP_MS,
510 /*0x2b*/ SABRE_IMAP_SER,
511 /*0x2c*/ 0 /* reserved */,
512 /*0x2d*/ 0 /* reserved */,
513 /*0x2e*/ SABRE_IMAP_UE,
514 /*0x2f*/ SABRE_IMAP_CE,
515 /*0x30*/ SABRE_IMAP_PCIERR,
517 #define SABRE_ONBOARD_IRQ_BASE 0x20
518 #define SABRE_ONBOARD_IRQ_LAST 0x30
519 #define sabre_onboard_imap_offset(__ino) \
520 __onboard_imap_off[(__ino) - SABRE_ONBOARD_IRQ_BASE]
522 #define sabre_iclr_offset(ino) \
523 ((ino & 0x20) ? (SABRE_ICLR_SCSI + (((ino) & 0x1f) << 3)) : \
524 (SABRE_ICLR_A_SLOT0 + (((ino) & 0x1f)<<3)))
526 /* PCI SABRE INO number to Sparc PIL level. */
527 static unsigned char sabre_pil_table[] = {
528 /*0x00*/0, 0, 0, 0, /* PCI A slot 0 Int A, B, C, D */
529 /*0x04*/0, 0, 0, 0, /* PCI A slot 1 Int A, B, C, D */
530 /*0x08*/0, 0, 0, 0, /* PCI A slot 2 Int A, B, C, D */
531 /*0x0c*/0, 0, 0, 0, /* PCI A slot 3 Int A, B, C, D */
532 /*0x10*/0, 0, 0, 0, /* PCI B slot 0 Int A, B, C, D */
533 /*0x14*/0, 0, 0, 0, /* PCI B slot 1 Int A, B, C, D */
534 /*0x18*/0, 0, 0, 0, /* PCI B slot 2 Int A, B, C, D */
535 /*0x1c*/0, 0, 0, 0, /* PCI B slot 3 Int A, B, C, D */
536 /*0x20*/4, /* SCSI */
537 /*0x21*/5, /* Ethernet */
538 /*0x22*/8, /* Parallel Port */
539 /*0x23*/13, /* Audio Record */
540 /*0x24*/14, /* Audio Playback */
541 /*0x25*/15, /* PowerFail */
542 /*0x26*/4, /* second SCSI */
543 /*0x27*/11, /* Floppy */
544 /*0x28*/4, /* Spare Hardware */
545 /*0x29*/9, /* Keyboard */
546 /*0x2a*/4, /* Mouse */
547 /*0x2b*/12, /* Serial */
548 /*0x2c*/10, /* Timer 0 */
549 /*0x2d*/11, /* Timer 1 */
550 /*0x2e*/15, /* Uncorrectable ECC */
551 /*0x2f*/15, /* Correctable ECC */
552 /*0x30*/15, /* PCI Bus A Error */
553 /*0x31*/15, /* PCI Bus B Error */
554 /*0x32*/15, /* Power Management */
557 static int __init sabre_ino_to_pil(struct pci_dev *pdev, unsigned int ino)
562 pdev->vendor == PCI_VENDOR_ID_SUN &&
563 pdev->device == PCI_DEVICE_ID_SUN_RIO_USB)
566 ret = sabre_pil_table[ino];
567 if (ret == 0 && pdev == NULL) {
569 } else if (ret == 0) {
570 switch ((pdev->class >> 16) & 0xff) {
571 case PCI_BASE_CLASS_STORAGE:
575 case PCI_BASE_CLASS_NETWORK:
579 case PCI_BASE_CLASS_DISPLAY:
583 case PCI_BASE_CLASS_MULTIMEDIA:
584 case PCI_BASE_CLASS_MEMORY:
585 case PCI_BASE_CLASS_BRIDGE:
586 case PCI_BASE_CLASS_SERIAL:
598 static unsigned int __init sabre_irq_build(struct pci_pbm_info *pbm,
599 struct pci_dev *pdev,
602 struct ino_bucket *bucket;
603 unsigned long imap, iclr;
604 unsigned long imap_off, iclr_off;
605 int pil, inofixup = 0;
608 if (ino < SABRE_ONBOARD_IRQ_BASE) {
610 imap_off = sabre_pcislot_imap_offset(ino);
613 if (ino > SABRE_ONBOARD_IRQ_LAST) {
614 prom_printf("sabre_irq_build: Wacky INO [%x]\n", ino);
617 imap_off = sabre_onboard_imap_offset(ino);
620 /* Now build the IRQ bucket. */
621 pil = sabre_ino_to_pil(pdev, ino);
623 if (PIL_RESERVED(pil))
626 imap = pbm->controller_regs + imap_off;
629 iclr_off = sabre_iclr_offset(ino);
630 iclr = pbm->controller_regs + iclr_off;
633 if ((ino & 0x20) == 0)
634 inofixup = ino & 0x03;
636 bucket = __bucket(build_irq(pil, inofixup, iclr, imap));
637 bucket->flags |= IBF_PCI;
640 struct pcidev_cookie *pcp = pdev->sysdata;
642 /* When a device lives behind a bridge deeper in the
643 * PCI bus topology than APB, a special sequence must
644 * run to make sure all pending DMA transfers at the
645 * time of IRQ delivery are visible in the coherency
646 * domain by the cpu. This sequence is to perform
647 * a read on the far side of the non-APB bridge, then
648 * perform a read of Sabre's DMA write-sync register.
650 * Currently, the PCI_CONFIG register for the device
651 * is used for this read from the far side of the bridge.
653 if (pdev->bus->number != pcp->pbm->pci_first_busno) {
654 bucket->flags |= IBF_DMA_SYNC;
655 bucket->synctab_ent = dma_sync_reg_table_entry++;
656 dma_sync_reg_table[bucket->synctab_ent] =
657 (unsigned long) sabre_pci_config_mkaddr(
659 pdev->bus->number, pdev->devfn, PCI_COMMAND);
662 return __irq(bucket);
665 /* SABRE error handling support. */
666 static void sabre_check_iommu_error(struct pci_controller_info *p,
670 struct pci_iommu *iommu = p->pbm_A.iommu;
671 unsigned long iommu_tag[16];
672 unsigned long iommu_data[16];
677 spin_lock_irqsave(&iommu->lock, flags);
678 control = sabre_read(iommu->iommu_control);
679 if (control & SABRE_IOMMUCTRL_ERR) {
682 /* Clear the error encountered bit.
683 * NOTE: On Sabre this is write 1 to clear,
684 * which is different from Psycho.
686 sabre_write(iommu->iommu_control, control);
687 switch((control & SABRE_IOMMUCTRL_ERRSTS) >> 25UL) {
689 type_string = "Invalid Error";
692 type_string = "ECC Error";
695 type_string = "Unknown";
698 printk("SABRE%d: IOMMU Error, type[%s]\n",
699 p->index, type_string);
701 /* Enter diagnostic mode and probe for error'd
702 * entries in the IOTLB.
704 control &= ~(SABRE_IOMMUCTRL_ERRSTS | SABRE_IOMMUCTRL_ERR);
705 sabre_write(iommu->iommu_control,
706 (control | SABRE_IOMMUCTRL_DENAB));
707 for (i = 0; i < 16; i++) {
708 unsigned long base = p->pbm_A.controller_regs;
711 sabre_read(base + SABRE_IOMMU_TAG + (i * 8UL));
713 sabre_read(base + SABRE_IOMMU_DATA + (i * 8UL));
714 sabre_write(base + SABRE_IOMMU_TAG + (i * 8UL), 0);
715 sabre_write(base + SABRE_IOMMU_DATA + (i * 8UL), 0);
717 sabre_write(iommu->iommu_control, control);
719 for (i = 0; i < 16; i++) {
720 unsigned long tag, data;
723 if (!(tag & SABRE_IOMMUTAG_ERR))
726 data = iommu_data[i];
727 switch((tag & SABRE_IOMMUTAG_ERRSTS) >> 23UL) {
729 type_string = "Invalid Error";
732 type_string = "ECC Error";
735 type_string = "Unknown";
738 printk("SABRE%d: IOMMU TAG(%d)[RAW(%016lx)error(%s)wr(%d)sz(%dK)vpg(%08lx)]\n",
739 p->index, i, tag, type_string,
740 ((tag & SABRE_IOMMUTAG_WRITE) ? 1 : 0),
741 ((tag & SABRE_IOMMUTAG_SIZE) ? 64 : 8),
742 ((tag & SABRE_IOMMUTAG_VPN) << IOMMU_PAGE_SHIFT));
743 printk("SABRE%d: IOMMU DATA(%d)[RAW(%016lx)valid(%d)used(%d)cache(%d)ppg(%016lx)\n",
745 ((data & SABRE_IOMMUDATA_VALID) ? 1 : 0),
746 ((data & SABRE_IOMMUDATA_USED) ? 1 : 0),
747 ((data & SABRE_IOMMUDATA_CACHE) ? 1 : 0),
748 ((data & SABRE_IOMMUDATA_PPN) << IOMMU_PAGE_SHIFT));
751 spin_unlock_irqrestore(&iommu->lock, flags);
754 static irqreturn_t sabre_ue_intr(int irq, void *dev_id, struct pt_regs *regs)
756 struct pci_controller_info *p = dev_id;
757 unsigned long afsr_reg = p->pbm_A.controller_regs + SABRE_UE_AFSR;
758 unsigned long afar_reg = p->pbm_A.controller_regs + SABRE_UECE_AFAR;
759 unsigned long afsr, afar, error_bits;
762 /* Latch uncorrectable error status. */
763 afar = sabre_read(afar_reg);
764 afsr = sabre_read(afsr_reg);
766 /* Clear the primary/secondary error status bits. */
768 (SABRE_UEAFSR_PDRD | SABRE_UEAFSR_PDWR |
769 SABRE_UEAFSR_SDRD | SABRE_UEAFSR_SDWR |
770 SABRE_UEAFSR_SDTE | SABRE_UEAFSR_PDTE);
773 sabre_write(afsr_reg, error_bits);
776 printk("SABRE%d: Uncorrectable Error, primary error type[%s%s]\n",
778 ((error_bits & SABRE_UEAFSR_PDRD) ?
780 ((error_bits & SABRE_UEAFSR_PDWR) ?
781 "DMA Write" : "???")),
782 ((error_bits & SABRE_UEAFSR_PDTE) ?
783 ":Translation Error" : ""));
784 printk("SABRE%d: bytemask[%04lx] dword_offset[%lx] was_block(%d)\n",
786 (afsr & SABRE_UEAFSR_BMSK) >> 32UL,
787 (afsr & SABRE_UEAFSR_OFF) >> 29UL,
788 ((afsr & SABRE_UEAFSR_BLK) ? 1 : 0));
789 printk("SABRE%d: UE AFAR [%016lx]\n", p->index, afar);
790 printk("SABRE%d: UE Secondary errors [", p->index);
792 if (afsr & SABRE_UEAFSR_SDRD) {
794 printk("(DMA Read)");
796 if (afsr & SABRE_UEAFSR_SDWR) {
798 printk("(DMA Write)");
800 if (afsr & SABRE_UEAFSR_SDTE) {
802 printk("(Translation Error)");
808 /* Interrogate IOMMU for error status. */
809 sabre_check_iommu_error(p, afsr, afar);
814 static irqreturn_t sabre_ce_intr(int irq, void *dev_id, struct pt_regs *regs)
816 struct pci_controller_info *p = dev_id;
817 unsigned long afsr_reg = p->pbm_A.controller_regs + SABRE_CE_AFSR;
818 unsigned long afar_reg = p->pbm_A.controller_regs + SABRE_UECE_AFAR;
819 unsigned long afsr, afar, error_bits;
822 /* Latch error status. */
823 afar = sabre_read(afar_reg);
824 afsr = sabre_read(afsr_reg);
826 /* Clear primary/secondary error status bits. */
828 (SABRE_CEAFSR_PDRD | SABRE_CEAFSR_PDWR |
829 SABRE_CEAFSR_SDRD | SABRE_CEAFSR_SDWR);
832 sabre_write(afsr_reg, error_bits);
835 printk("SABRE%d: Correctable Error, primary error type[%s]\n",
837 ((error_bits & SABRE_CEAFSR_PDRD) ?
839 ((error_bits & SABRE_CEAFSR_PDWR) ?
840 "DMA Write" : "???")));
842 /* XXX Use syndrome and afar to print out module string just like
843 * XXX UDB CE trap handler does... -DaveM
845 printk("SABRE%d: syndrome[%02lx] bytemask[%04lx] dword_offset[%lx] "
848 (afsr & SABRE_CEAFSR_ESYND) >> 48UL,
849 (afsr & SABRE_CEAFSR_BMSK) >> 32UL,
850 (afsr & SABRE_CEAFSR_OFF) >> 29UL,
851 ((afsr & SABRE_CEAFSR_BLK) ? 1 : 0));
852 printk("SABRE%d: CE AFAR [%016lx]\n", p->index, afar);
853 printk("SABRE%d: CE Secondary errors [", p->index);
855 if (afsr & SABRE_CEAFSR_SDRD) {
857 printk("(DMA Read)");
859 if (afsr & SABRE_CEAFSR_SDWR) {
861 printk("(DMA Write)");
870 static irqreturn_t sabre_pcierr_intr_other(struct pci_controller_info *p)
872 unsigned long csr_reg, csr, csr_error_bits;
873 irqreturn_t ret = IRQ_NONE;
876 csr_reg = p->pbm_A.controller_regs + SABRE_PCICTRL;
877 csr = sabre_read(csr_reg);
879 csr & SABRE_PCICTRL_SERR;
880 if (csr_error_bits) {
881 /* Clear the errors. */
882 sabre_write(csr_reg, csr);
885 if (csr_error_bits & SABRE_PCICTRL_SERR)
886 printk("SABRE%d: PCI SERR signal asserted.\n",
890 pci_read_config_word(sabre_root_bus->self,
892 if (stat & (PCI_STATUS_PARITY |
893 PCI_STATUS_SIG_TARGET_ABORT |
894 PCI_STATUS_REC_TARGET_ABORT |
895 PCI_STATUS_REC_MASTER_ABORT |
896 PCI_STATUS_SIG_SYSTEM_ERROR)) {
897 printk("SABRE%d: PCI bus error, PCI_STATUS[%04x]\n",
899 pci_write_config_word(sabre_root_bus->self,
906 static irqreturn_t sabre_pcierr_intr(int irq, void *dev_id, struct pt_regs *regs)
908 struct pci_controller_info *p = dev_id;
909 unsigned long afsr_reg, afar_reg;
910 unsigned long afsr, afar, error_bits;
913 afsr_reg = p->pbm_A.controller_regs + SABRE_PIOAFSR;
914 afar_reg = p->pbm_A.controller_regs + SABRE_PIOAFAR;
916 /* Latch error status. */
917 afar = sabre_read(afar_reg);
918 afsr = sabre_read(afsr_reg);
920 /* Clear primary/secondary error status bits. */
922 (SABRE_PIOAFSR_PMA | SABRE_PIOAFSR_PTA |
923 SABRE_PIOAFSR_PRTRY | SABRE_PIOAFSR_PPERR |
924 SABRE_PIOAFSR_SMA | SABRE_PIOAFSR_STA |
925 SABRE_PIOAFSR_SRTRY | SABRE_PIOAFSR_SPERR);
927 return sabre_pcierr_intr_other(p);
928 sabre_write(afsr_reg, error_bits);
931 printk("SABRE%d: PCI Error, primary error type[%s]\n",
933 (((error_bits & SABRE_PIOAFSR_PMA) ?
935 ((error_bits & SABRE_PIOAFSR_PTA) ?
937 ((error_bits & SABRE_PIOAFSR_PRTRY) ?
938 "Excessive Retries" :
939 ((error_bits & SABRE_PIOAFSR_PPERR) ?
940 "Parity Error" : "???"))))));
941 printk("SABRE%d: bytemask[%04lx] was_block(%d)\n",
943 (afsr & SABRE_PIOAFSR_BMSK) >> 32UL,
944 (afsr & SABRE_PIOAFSR_BLK) ? 1 : 0);
945 printk("SABRE%d: PCI AFAR [%016lx]\n", p->index, afar);
946 printk("SABRE%d: PCI Secondary errors [", p->index);
948 if (afsr & SABRE_PIOAFSR_SMA) {
950 printk("(Master Abort)");
952 if (afsr & SABRE_PIOAFSR_STA) {
954 printk("(Target Abort)");
956 if (afsr & SABRE_PIOAFSR_SRTRY) {
958 printk("(Excessive Retries)");
960 if (afsr & SABRE_PIOAFSR_SPERR) {
962 printk("(Parity Error)");
968 /* For the error types shown, scan both PCI buses for devices
969 * which have logged that error type.
972 /* If we see a Target Abort, this could be the result of an
973 * IOMMU translation error of some sort. It is extremely
974 * useful to log this information as usually it indicates
975 * a bug in the IOMMU support code or a PCI device driver.
977 if (error_bits & (SABRE_PIOAFSR_PTA | SABRE_PIOAFSR_STA)) {
978 sabre_check_iommu_error(p, afsr, afar);
979 pci_scan_for_target_abort(p, &p->pbm_A, p->pbm_A.pci_bus);
980 pci_scan_for_target_abort(p, &p->pbm_B, p->pbm_B.pci_bus);
982 if (error_bits & (SABRE_PIOAFSR_PMA | SABRE_PIOAFSR_SMA)) {
983 pci_scan_for_master_abort(p, &p->pbm_A, p->pbm_A.pci_bus);
984 pci_scan_for_master_abort(p, &p->pbm_B, p->pbm_B.pci_bus);
986 /* For excessive retries, SABRE/PBM will abort the device
987 * and there is no way to specifically check for excessive
988 * retries in the config space status registers. So what
989 * we hope is that we'll catch it via the master/target
993 if (error_bits & (SABRE_PIOAFSR_PPERR | SABRE_PIOAFSR_SPERR)) {
994 pci_scan_for_parity_error(p, &p->pbm_A, p->pbm_A.pci_bus);
995 pci_scan_for_parity_error(p, &p->pbm_B, p->pbm_B.pci_bus);
1001 /* XXX What about PowerFail/PowerManagement??? -DaveM */
1002 #define SABRE_UE_INO 0x2e
1003 #define SABRE_CE_INO 0x2f
1004 #define SABRE_PCIERR_INO 0x30
1005 static void __init sabre_register_error_handlers(struct pci_controller_info *p)
1007 struct pci_pbm_info *pbm = &p->pbm_A; /* arbitrary */
1008 unsigned long base = pbm->controller_regs;
1009 unsigned long irq, portid = pbm->portid;
1012 /* We clear the error bits in the appropriate AFSR before
1013 * registering the handler so that we don't get spurious
1016 sabre_write(base + SABRE_UE_AFSR,
1017 (SABRE_UEAFSR_PDRD | SABRE_UEAFSR_PDWR |
1018 SABRE_UEAFSR_SDRD | SABRE_UEAFSR_SDWR |
1019 SABRE_UEAFSR_SDTE | SABRE_UEAFSR_PDTE));
1020 irq = sabre_irq_build(pbm, NULL, (portid << 6) | SABRE_UE_INO);
1021 if (request_irq(irq, sabre_ue_intr,
1022 SA_SHIRQ, "SABRE UE", p) < 0) {
1023 prom_printf("SABRE%d: Cannot register UE interrupt.\n",
1028 sabre_write(base + SABRE_CE_AFSR,
1029 (SABRE_CEAFSR_PDRD | SABRE_CEAFSR_PDWR |
1030 SABRE_CEAFSR_SDRD | SABRE_CEAFSR_SDWR));
1031 irq = sabre_irq_build(pbm, NULL, (portid << 6) | SABRE_CE_INO);
1032 if (request_irq(irq, sabre_ce_intr,
1033 SA_SHIRQ, "SABRE CE", p) < 0) {
1034 prom_printf("SABRE%d: Cannot register CE interrupt.\n",
1039 irq = sabre_irq_build(pbm, NULL, (portid << 6) | SABRE_PCIERR_INO);
1040 if (request_irq(irq, sabre_pcierr_intr,
1041 SA_SHIRQ, "SABRE PCIERR", p) < 0) {
1042 prom_printf("SABRE%d: Cannot register PciERR interrupt.\n",
1047 tmp = sabre_read(base + SABRE_PCICTRL);
1048 tmp |= SABRE_PCICTRL_ERREN;
1049 sabre_write(base + SABRE_PCICTRL, tmp);
1052 static void __init sabre_resource_adjust(struct pci_dev *pdev,
1053 struct resource *res,
1054 struct resource *root)
1056 struct pci_pbm_info *pbm = pdev->bus->sysdata;
1059 if (res->flags & IORESOURCE_IO)
1060 base = pbm->controller_regs + SABRE_IOSPACE;
1062 base = pbm->controller_regs + SABRE_MEMSPACE;
1068 static void __init sabre_base_address_update(struct pci_dev *pdev, int resource)
1070 struct pcidev_cookie *pcp = pdev->sysdata;
1071 struct pci_pbm_info *pbm = pcp->pbm;
1072 struct resource *res;
1075 int where, size, is_64bit;
1077 res = &pdev->resource[resource];
1079 where = PCI_BASE_ADDRESS_0 + (resource * 4);
1080 } else if (resource == PCI_ROM_RESOURCE) {
1081 where = pdev->rom_base_reg;
1083 /* Somebody might have asked allocation of a non-standard resource */
1088 if (res->flags & IORESOURCE_IO)
1089 base = pbm->controller_regs + SABRE_IOSPACE;
1091 base = pbm->controller_regs + SABRE_MEMSPACE;
1092 if ((res->flags & PCI_BASE_ADDRESS_MEM_TYPE_MASK)
1093 == PCI_BASE_ADDRESS_MEM_TYPE_64)
1097 size = res->end - res->start;
1098 pci_read_config_dword(pdev, where, ®);
1099 reg = ((reg & size) |
1100 (((u32)(res->start - base)) & ~size));
1101 if (resource == PCI_ROM_RESOURCE) {
1102 reg |= PCI_ROM_ADDRESS_ENABLE;
1103 res->flags |= IORESOURCE_ROM_ENABLE;
1105 pci_write_config_dword(pdev, where, reg);
1107 /* This knows that the upper 32-bits of the address
1108 * must be zero. Our PCI common layer enforces this.
1111 pci_write_config_dword(pdev, where + 4, 0);
1114 static void __init apb_init(struct pci_controller_info *p, struct pci_bus *sabre_bus)
1116 struct pci_dev *pdev;
1118 list_for_each_entry(pdev, &sabre_bus->devices, bus_list) {
1120 if (pdev->vendor == PCI_VENDOR_ID_SUN &&
1121 pdev->device == PCI_DEVICE_ID_SUN_SIMBA) {
1125 sabre_read_pci_cfg(pdev->bus, pdev->devfn,
1126 PCI_COMMAND, 2, &word32);
1127 word16 = (u16) word32;
1128 word16 |= PCI_COMMAND_SERR | PCI_COMMAND_PARITY |
1129 PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY |
1131 word32 = (u32) word16;
1132 sabre_write_pci_cfg(pdev->bus, pdev->devfn,
1133 PCI_COMMAND, 2, word32);
1135 /* Status register bits are "write 1 to clear". */
1136 sabre_write_pci_cfg(pdev->bus, pdev->devfn,
1137 PCI_STATUS, 2, 0xffff);
1138 sabre_write_pci_cfg(pdev->bus, pdev->devfn,
1139 PCI_SEC_STATUS, 2, 0xffff);
1141 /* Use a primary/seconday latency timer value
1144 sabre_write_pci_cfg(pdev->bus, pdev->devfn,
1145 PCI_LATENCY_TIMER, 1, 64);
1146 sabre_write_pci_cfg(pdev->bus, pdev->devfn,
1147 PCI_SEC_LATENCY_TIMER, 1, 64);
1149 /* Enable reporting/forwarding of master aborts,
1152 sabre_write_pci_cfg(pdev->bus, pdev->devfn,
1153 PCI_BRIDGE_CONTROL, 1,
1154 (PCI_BRIDGE_CTL_PARITY |
1155 PCI_BRIDGE_CTL_SERR |
1156 PCI_BRIDGE_CTL_MASTER_ABORT));
1161 static struct pcidev_cookie *alloc_bridge_cookie(struct pci_pbm_info *pbm)
1163 struct pcidev_cookie *cookie = kmalloc(sizeof(*cookie), GFP_KERNEL);
1166 prom_printf("SABRE: Critical allocation failure.\n");
1170 /* All we care about is the PBM. */
1171 memset(cookie, 0, sizeof(*cookie));
1177 static void __init sabre_scan_bus(struct pci_controller_info *p)
1180 struct pci_bus *sabre_bus, *pbus;
1181 struct pci_pbm_info *pbm;
1182 struct pcidev_cookie *cookie;
1185 /* The APB bridge speaks to the Sabre host PCI bridge
1186 * at 66Mhz, but the front side of APB runs at 33Mhz
1187 * for both segments.
1189 p->pbm_A.is_66mhz_capable = 0;
1190 p->pbm_B.is_66mhz_capable = 0;
1192 /* This driver has not been verified to handle
1193 * multiple SABREs yet, so trap this.
1195 * Also note that the SABRE host bridge is hardwired
1199 prom_printf("SABRE: Multiple controllers unsupported.\n");
1204 cookie = alloc_bridge_cookie(&p->pbm_A);
1206 sabre_bus = pci_scan_bus(p->pci_first_busno,
1209 pci_fixup_host_bridge_self(sabre_bus);
1210 sabre_bus->self->sysdata = cookie;
1212 sabre_root_bus = sabre_bus;
1214 apb_init(p, sabre_bus);
1218 list_for_each_entry(pbus, &sabre_bus->children, node) {
1220 if (pbus->number == p->pbm_A.pci_first_busno) {
1222 } else if (pbus->number == p->pbm_B.pci_first_busno) {
1227 cookie = alloc_bridge_cookie(pbm);
1228 pbus->self->sysdata = cookie;
1232 pbus->sysdata = pbm;
1233 pbm->pci_bus = pbus;
1234 pci_fill_in_pbm_cookies(pbus, pbm, pbm->prom_node);
1235 pci_record_assignments(pbm, pbus);
1236 pci_assign_unassigned(pbm, pbus);
1237 pci_fixup_irq(pbm, pbus);
1238 pci_determine_66mhz_disposition(pbm, pbus);
1239 pci_setup_busmastering(pbm, pbus);
1242 if (!sabres_scanned) {
1243 /* Hummingbird, no APBs. */
1245 sabre_bus->sysdata = pbm;
1246 pbm->pci_bus = sabre_bus;
1247 pci_fill_in_pbm_cookies(sabre_bus, pbm, pbm->prom_node);
1248 pci_record_assignments(pbm, sabre_bus);
1249 pci_assign_unassigned(pbm, sabre_bus);
1250 pci_fixup_irq(pbm, sabre_bus);
1251 pci_determine_66mhz_disposition(pbm, sabre_bus);
1252 pci_setup_busmastering(pbm, sabre_bus);
1255 sabre_register_error_handlers(p);
1258 static void __init sabre_iommu_init(struct pci_controller_info *p,
1259 int tsbsize, unsigned long dvma_offset,
1262 struct pci_iommu *iommu = p->pbm_A.iommu;
1263 unsigned long tsbbase, i, order;
1266 /* Setup initial software IOMMU state. */
1267 spin_lock_init(&iommu->lock);
1268 iommu->ctx_lowest_free = 1;
1270 /* Register addresses. */
1271 iommu->iommu_control = p->pbm_A.controller_regs + SABRE_IOMMU_CONTROL;
1272 iommu->iommu_tsbbase = p->pbm_A.controller_regs + SABRE_IOMMU_TSBBASE;
1273 iommu->iommu_flush = p->pbm_A.controller_regs + SABRE_IOMMU_FLUSH;
1274 iommu->write_complete_reg = p->pbm_A.controller_regs + SABRE_WRSYNC;
1275 /* Sabre's IOMMU lacks ctx flushing. */
1276 iommu->iommu_ctxflush = 0;
1278 /* Invalidate TLB Entries. */
1279 control = sabre_read(p->pbm_A.controller_regs + SABRE_IOMMU_CONTROL);
1280 control |= SABRE_IOMMUCTRL_DENAB;
1281 sabre_write(p->pbm_A.controller_regs + SABRE_IOMMU_CONTROL, control);
1283 for(i = 0; i < 16; i++) {
1284 sabre_write(p->pbm_A.controller_regs + SABRE_IOMMU_TAG + (i * 8UL), 0);
1285 sabre_write(p->pbm_A.controller_regs + SABRE_IOMMU_DATA + (i * 8UL), 0);
1288 /* Leave diag mode enabled for full-flushing done
1292 iommu->dummy_page = __get_free_pages(GFP_KERNEL, 0);
1293 if (!iommu->dummy_page) {
1294 prom_printf("PSYCHO_IOMMU: Error, gfp(dummy_page) failed.\n");
1297 memset((void *)iommu->dummy_page, 0, PAGE_SIZE);
1298 iommu->dummy_page_pa = (unsigned long) __pa(iommu->dummy_page);
1300 tsbbase = __get_free_pages(GFP_KERNEL, order = get_order(tsbsize * 1024 * 8));
1302 prom_printf("SABRE_IOMMU: Error, gfp(tsb) failed.\n");
1305 iommu->page_table = (iopte_t *)tsbbase;
1306 iommu->page_table_map_base = dvma_offset;
1307 iommu->dma_addr_mask = dma_mask;
1308 pci_iommu_table_init(iommu, PAGE_SIZE << order);
1310 sabre_write(p->pbm_A.controller_regs + SABRE_IOMMU_TSBBASE, __pa(tsbbase));
1312 control = sabre_read(p->pbm_A.controller_regs + SABRE_IOMMU_CONTROL);
1313 control &= ~(SABRE_IOMMUCTRL_TSBSZ | SABRE_IOMMUCTRL_TBWSZ);
1314 control |= SABRE_IOMMUCTRL_ENAB;
1317 control |= SABRE_IOMMU_TSBSZ_64K;
1318 iommu->page_table_sz_bits = 16;
1321 control |= SABRE_IOMMU_TSBSZ_128K;
1322 iommu->page_table_sz_bits = 17;
1325 prom_printf("iommu_init: Illegal TSB size %d\n", tsbsize);
1329 sabre_write(p->pbm_A.controller_regs + SABRE_IOMMU_CONTROL, control);
1331 /* We start with no consistent mappings. */
1332 iommu->lowest_consistent_map =
1333 1 << (iommu->page_table_sz_bits - PBM_LOGCLUSTERS);
1335 for (i = 0; i < PBM_NCLUSTERS; i++) {
1336 iommu->alloc_info[i].flush = 0;
1337 iommu->alloc_info[i].next = 0;
1341 static void __init pbm_register_toplevel_resources(struct pci_controller_info *p,
1342 struct pci_pbm_info *pbm)
1344 char *name = pbm->name;
1345 unsigned long ibase = p->pbm_A.controller_regs + SABRE_IOSPACE;
1346 unsigned long mbase = p->pbm_A.controller_regs + SABRE_MEMSPACE;
1348 unsigned long first, last, i;
1351 sprintf(name, "SABRE%d PBM%c",
1353 (pbm == &p->pbm_A ? 'A' : 'B'));
1354 pbm->io_space.name = pbm->mem_space.name = name;
1356 devfn = PCI_DEVFN(1, (pbm == &p->pbm_A) ? 0 : 1);
1357 addr = sabre_pci_config_mkaddr(pbm, 0, devfn, APB_IO_ADDRESS_MAP);
1359 pci_config_read8(addr, &map);
1363 for (i = 0; i < 8; i++) {
1364 if ((map & (1 << i)) != 0) {
1371 pbm->io_space.start = ibase + (first << 21UL);
1372 pbm->io_space.end = ibase + (last << 21UL) + ((1 << 21UL) - 1);
1373 pbm->io_space.flags = IORESOURCE_IO;
1375 addr = sabre_pci_config_mkaddr(pbm, 0, devfn, APB_MEM_ADDRESS_MAP);
1377 pci_config_read8(addr, &map);
1381 for (i = 0; i < 8; i++) {
1382 if ((map & (1 << i)) != 0) {
1389 pbm->mem_space.start = mbase + (first << 29UL);
1390 pbm->mem_space.end = mbase + (last << 29UL) + ((1 << 29UL) - 1);
1391 pbm->mem_space.flags = IORESOURCE_MEM;
1393 if (request_resource(&ioport_resource, &pbm->io_space) < 0) {
1394 prom_printf("Cannot register PBM-%c's IO space.\n",
1395 (pbm == &p->pbm_A ? 'A' : 'B'));
1398 if (request_resource(&iomem_resource, &pbm->mem_space) < 0) {
1399 prom_printf("Cannot register PBM-%c's MEM space.\n",
1400 (pbm == &p->pbm_A ? 'A' : 'B'));
1404 /* Register legacy regions if this PBM covers that area. */
1405 if (pbm->io_space.start == ibase &&
1406 pbm->mem_space.start == mbase)
1407 pci_register_legacy_regions(&pbm->io_space,
1411 static void __init sabre_pbm_init(struct pci_controller_info *p, int sabre_node, u32 dma_begin)
1413 struct pci_pbm_info *pbm;
1416 int node, simbas_found;
1419 node = prom_getchild(sabre_node);
1420 while ((node = prom_searchsiblings(node, "pci")) != 0) {
1423 err = prom_getproperty(node, "model", namebuf, sizeof(namebuf));
1424 if ((err <= 0) || strncmp(namebuf, "SUNW,simba", err))
1427 err = prom_getproperty(node, "bus-range",
1428 (char *)&busrange[0], sizeof(busrange));
1429 if (err == 0 || err == -1) {
1430 prom_printf("APB: Error, cannot get PCI bus-range.\n");
1435 if (busrange[0] == 1)
1439 pbm->chip_type = PBM_CHIP_TYPE_SABRE;
1441 pbm->prom_node = node;
1442 pbm->pci_first_slot = 1;
1443 pbm->pci_first_busno = busrange[0];
1444 pbm->pci_last_busno = busrange[1];
1446 prom_getstring(node, "name", pbm->prom_name, sizeof(pbm->prom_name));
1447 err = prom_getproperty(node, "ranges",
1448 (char *)pbm->pbm_ranges,
1449 sizeof(pbm->pbm_ranges));
1451 pbm->num_pbm_ranges =
1452 (err / sizeof(struct linux_prom_pci_ranges));
1454 pbm->num_pbm_ranges = 0;
1456 err = prom_getproperty(node, "interrupt-map",
1457 (char *)pbm->pbm_intmap,
1458 sizeof(pbm->pbm_intmap));
1460 pbm->num_pbm_intmap = (err / sizeof(struct linux_prom_pci_intmap));
1461 err = prom_getproperty(node, "interrupt-map-mask",
1462 (char *)&pbm->pbm_intmask,
1463 sizeof(pbm->pbm_intmask));
1465 prom_printf("APB: Fatal error, no interrupt-map-mask.\n");
1469 pbm->num_pbm_intmap = 0;
1470 memset(&pbm->pbm_intmask, 0, sizeof(pbm->pbm_intmask));
1473 pbm_register_toplevel_resources(p, pbm);
1476 node = prom_getsibling(node);
1480 if (simbas_found == 0) {
1483 /* No APBs underneath, probably this is a hummingbird
1488 pbm->prom_node = sabre_node;
1489 pbm->pci_first_busno = p->pci_first_busno;
1490 pbm->pci_last_busno = p->pci_last_busno;
1492 prom_getstring(sabre_node, "name", pbm->prom_name, sizeof(pbm->prom_name));
1493 err = prom_getproperty(sabre_node, "ranges",
1494 (char *) pbm->pbm_ranges,
1495 sizeof(pbm->pbm_ranges));
1497 pbm->num_pbm_ranges =
1498 (err / sizeof(struct linux_prom_pci_ranges));
1500 pbm->num_pbm_ranges = 0;
1502 err = prom_getproperty(sabre_node, "interrupt-map",
1503 (char *) pbm->pbm_intmap,
1504 sizeof(pbm->pbm_intmap));
1507 pbm->num_pbm_intmap = (err / sizeof(struct linux_prom_pci_intmap));
1508 err = prom_getproperty(sabre_node, "interrupt-map-mask",
1509 (char *)&pbm->pbm_intmask,
1510 sizeof(pbm->pbm_intmask));
1512 prom_printf("Hummingbird: Fatal error, no interrupt-map-mask.\n");
1516 pbm->num_pbm_intmap = 0;
1517 memset(&pbm->pbm_intmask, 0, sizeof(pbm->pbm_intmask));
1521 sprintf(pbm->name, "SABRE%d PBM%c", p->index,
1522 (pbm == &p->pbm_A ? 'A' : 'B'));
1523 pbm->io_space.name = pbm->mem_space.name = pbm->name;
1525 /* Hack up top-level resources. */
1526 pbm->io_space.start = p->pbm_A.controller_regs + SABRE_IOSPACE;
1527 pbm->io_space.end = pbm->io_space.start + (1UL << 24) - 1UL;
1528 pbm->io_space.flags = IORESOURCE_IO;
1530 pbm->mem_space.start = p->pbm_A.controller_regs + SABRE_MEMSPACE;
1531 pbm->mem_space.end = pbm->mem_space.start + (unsigned long)dma_begin - 1UL;
1532 pbm->mem_space.flags = IORESOURCE_MEM;
1534 if (request_resource(&ioport_resource, &pbm->io_space) < 0) {
1535 prom_printf("Cannot register Hummingbird's IO space.\n");
1538 if (request_resource(&iomem_resource, &pbm->mem_space) < 0) {
1539 prom_printf("Cannot register Hummingbird's MEM space.\n");
1543 pci_register_legacy_regions(&pbm->io_space,
1548 void __init sabre_init(int pnode, char *model_name)
1550 struct linux_prom64_registers pr_regs[2];
1551 struct pci_controller_info *p;
1552 struct pci_iommu *iommu;
1556 u32 upa_portid, dma_mask;
1560 if (!strcmp(model_name, "pci108e,a001"))
1562 else if (!strcmp(model_name, "SUNW,sabre")) {
1565 if (prom_getproperty(pnode, "compatible",
1566 compat, sizeof(compat)) > 0 &&
1567 !strcmp(compat, "pci108e,a001")) {
1572 /* Of course, Sun has to encode things a thousand
1573 * different ways, inconsistently.
1575 cpu_find_by_instance(0, &cpu_node, NULL);
1576 if (prom_getproperty(cpu_node, "name",
1577 compat, sizeof(compat)) > 0 &&
1578 !strcmp(compat, "SUNW,UltraSPARC-IIe"))
1583 p = kmalloc(sizeof(*p), GFP_ATOMIC);
1585 prom_printf("SABRE: Error, kmalloc(pci_controller_info) failed.\n");
1588 memset(p, 0, sizeof(*p));
1590 iommu = kmalloc(sizeof(*iommu), GFP_ATOMIC);
1592 prom_printf("SABRE: Error, kmalloc(pci_iommu) failed.\n");
1595 memset(iommu, 0, sizeof(*iommu));
1596 p->pbm_A.iommu = p->pbm_B.iommu = iommu;
1598 upa_portid = prom_getintdefault(pnode, "upa-portid", 0xff);
1600 p->next = pci_controller_root;
1601 pci_controller_root = p;
1603 p->pbm_A.portid = upa_portid;
1604 p->pbm_B.portid = upa_portid;
1605 p->index = pci_num_controllers++;
1606 p->pbms_same_domain = 1;
1607 p->scan_bus = sabre_scan_bus;
1608 p->irq_build = sabre_irq_build;
1609 p->base_address_update = sabre_base_address_update;
1610 p->resource_adjust = sabre_resource_adjust;
1611 p->pci_ops = &sabre_ops;
1614 * Map in SABRE register set and report the presence of this SABRE.
1616 err = prom_getproperty(pnode, "reg",
1617 (char *)&pr_regs[0], sizeof(pr_regs));
1618 if(err == 0 || err == -1) {
1619 prom_printf("SABRE: Error, cannot get U2P registers "
1625 * First REG in property is base of entire SABRE register space.
1627 p->pbm_A.controller_regs = pr_regs[0].phys_addr;
1628 p->pbm_B.controller_regs = pr_regs[0].phys_addr;
1629 pci_dma_wsync = p->pbm_A.controller_regs + SABRE_WRSYNC;
1631 printk("PCI: Found SABRE, main regs at %016lx, wsync at %016lx\n",
1632 p->pbm_A.controller_regs, pci_dma_wsync);
1634 /* Clear interrupts */
1637 for (clear_irq = SABRE_ICLR_A_SLOT0; clear_irq < SABRE_ICLR_B_SLOT0 + 0x80; clear_irq += 8)
1638 sabre_write(p->pbm_A.controller_regs + clear_irq, 0x0UL);
1641 for (clear_irq = SABRE_ICLR_SCSI; clear_irq < SABRE_ICLR_SCSI + 0x80; clear_irq += 8)
1642 sabre_write(p->pbm_A.controller_regs + clear_irq, 0x0UL);
1644 /* Error interrupts are enabled later after the bus scan. */
1645 sabre_write(p->pbm_A.controller_regs + SABRE_PCICTRL,
1646 (SABRE_PCICTRL_MRLEN | SABRE_PCICTRL_SERR |
1647 SABRE_PCICTRL_ARBPARK | SABRE_PCICTRL_AEN));
1649 /* Now map in PCI config space for entire SABRE. */
1650 p->pbm_A.config_space = p->pbm_B.config_space =
1651 (p->pbm_A.controller_regs + SABRE_CONFIGSPACE);
1652 printk("SABRE: Shared PCI config space at %016lx\n",
1653 p->pbm_A.config_space);
1655 err = prom_getproperty(pnode, "virtual-dma",
1656 (char *)&vdma[0], sizeof(vdma));
1657 if(err == 0 || err == -1) {
1658 prom_printf("SABRE: Error, cannot get virtual-dma property "
1666 dma_mask |= 0x1fffffff;
1670 dma_mask |= 0x3fffffff;
1675 dma_mask |= 0x7fffffff;
1679 prom_printf("SABRE: strange virtual-dma size.\n");
1683 sabre_iommu_init(p, tsbsize, vdma[0], dma_mask);
1685 printk("SABRE: DVMA at %08x [%08x]\n", vdma[0], vdma[1]);
1687 err = prom_getproperty(pnode, "bus-range",
1688 (char *)&busrange[0], sizeof(busrange));
1689 if(err == 0 || err == -1) {
1690 prom_printf("SABRE: Error, cannot get PCI bus-range "
1695 p->pci_first_busno = busrange[0];
1696 p->pci_last_busno = busrange[1];
1699 * Look for APB underneath.
1701 sabre_pbm_init(p, pnode, vdma[0]);