[ARM] pxa: add keypad support for zylonite
[linux-2.6] / arch / arm / mach-pxa / lpd270.c
1 /*
2  * linux/arch/arm/mach-pxa/lpd270.c
3  *
4  * Support for the LogicPD PXA270 Card Engine.
5  * Derived from the mainstone code, which carries these notices:
6  *
7  * Author:      Nicolas Pitre
8  * Created:     Nov 05, 2002
9  * Copyright:   MontaVista Software Inc.
10  *
11  * This program is free software; you can redistribute it and/or modify
12  * it under the terms of the GNU General Public License version 2 as
13  * published by the Free Software Foundation.
14  */
15
16 #include <linux/init.h>
17 #include <linux/platform_device.h>
18 #include <linux/sysdev.h>
19 #include <linux/interrupt.h>
20 #include <linux/sched.h>
21 #include <linux/bitops.h>
22 #include <linux/fb.h>
23 #include <linux/ioport.h>
24 #include <linux/mtd/mtd.h>
25 #include <linux/mtd/partitions.h>
26
27 #include <asm/types.h>
28 #include <asm/setup.h>
29 #include <asm/memory.h>
30 #include <asm/mach-types.h>
31 #include <asm/hardware.h>
32 #include <asm/irq.h>
33 #include <asm/sizes.h>
34
35 #include <asm/mach/arch.h>
36 #include <asm/mach/map.h>
37 #include <asm/mach/irq.h>
38 #include <asm/mach/flash.h>
39
40 #include <asm/arch/pxa-regs.h>
41 #include <asm/arch/pxa2xx-regs.h>
42 #include <asm/arch/pxa2xx-gpio.h>
43 #include <asm/arch/lpd270.h>
44 #include <asm/arch/audio.h>
45 #include <asm/arch/pxafb.h>
46 #include <asm/arch/mmc.h>
47 #include <asm/arch/irda.h>
48 #include <asm/arch/ohci.h>
49
50 #include "generic.h"
51 #include "devices.h"
52
53
54 static unsigned int lpd270_irq_enabled;
55
56 static void lpd270_mask_irq(unsigned int irq)
57 {
58         int lpd270_irq = irq - LPD270_IRQ(0);
59
60         __raw_writew(~(1 << lpd270_irq), LPD270_INT_STATUS);
61
62         lpd270_irq_enabled &= ~(1 << lpd270_irq);
63         __raw_writew(lpd270_irq_enabled, LPD270_INT_MASK);
64 }
65
66 static void lpd270_unmask_irq(unsigned int irq)
67 {
68         int lpd270_irq = irq - LPD270_IRQ(0);
69
70         lpd270_irq_enabled |= 1 << lpd270_irq;
71         __raw_writew(lpd270_irq_enabled, LPD270_INT_MASK);
72 }
73
74 static struct irq_chip lpd270_irq_chip = {
75         .name           = "CPLD",
76         .ack            = lpd270_mask_irq,
77         .mask           = lpd270_mask_irq,
78         .unmask         = lpd270_unmask_irq,
79 };
80
81 static void lpd270_irq_handler(unsigned int irq, struct irq_desc *desc)
82 {
83         unsigned long pending;
84
85         pending = __raw_readw(LPD270_INT_STATUS) & lpd270_irq_enabled;
86         do {
87                 GEDR(0) = GPIO_bit(0);  /* clear useless edge notification */
88                 if (likely(pending)) {
89                         irq = LPD270_IRQ(0) + __ffs(pending);
90                         desc = irq_desc + irq;
91                         desc_handle_irq(irq, desc);
92
93                         pending = __raw_readw(LPD270_INT_STATUS) &
94                                                 lpd270_irq_enabled;
95                 }
96         } while (pending);
97 }
98
99 static void __init lpd270_init_irq(void)
100 {
101         int irq;
102
103         pxa27x_init_irq();
104
105         __raw_writew(0, LPD270_INT_MASK);
106         __raw_writew(0, LPD270_INT_STATUS);
107
108         /* setup extra LogicPD PXA270 irqs */
109         for (irq = LPD270_IRQ(2); irq <= LPD270_IRQ(4); irq++) {
110                 set_irq_chip(irq, &lpd270_irq_chip);
111                 set_irq_handler(irq, handle_level_irq);
112                 set_irq_flags(irq, IRQF_VALID | IRQF_PROBE);
113         }
114         set_irq_chained_handler(IRQ_GPIO(0), lpd270_irq_handler);
115         set_irq_type(IRQ_GPIO(0), IRQT_FALLING);
116 }
117
118
119 #ifdef CONFIG_PM
120 static int lpd270_irq_resume(struct sys_device *dev)
121 {
122         __raw_writew(lpd270_irq_enabled, LPD270_INT_MASK);
123         return 0;
124 }
125
126 static struct sysdev_class lpd270_irq_sysclass = {
127         .name = "cpld_irq",
128         .resume = lpd270_irq_resume,
129 };
130
131 static struct sys_device lpd270_irq_device = {
132         .cls = &lpd270_irq_sysclass,
133 };
134
135 static int __init lpd270_irq_device_init(void)
136 {
137         int ret = sysdev_class_register(&lpd270_irq_sysclass);
138         if (ret == 0)
139                 ret = sysdev_register(&lpd270_irq_device);
140         return ret;
141 }
142
143 device_initcall(lpd270_irq_device_init);
144 #endif
145
146
147 static struct resource smc91x_resources[] = {
148         [0] = {
149                 .start  = LPD270_ETH_PHYS,
150                 .end    = (LPD270_ETH_PHYS + 0xfffff),
151                 .flags  = IORESOURCE_MEM,
152         },
153         [1] = {
154                 .start  = LPD270_ETHERNET_IRQ,
155                 .end    = LPD270_ETHERNET_IRQ,
156                 .flags  = IORESOURCE_IRQ,
157         },
158 };
159
160 static struct platform_device smc91x_device = {
161         .name           = "smc91x",
162         .id             = 0,
163         .num_resources  = ARRAY_SIZE(smc91x_resources),
164         .resource       = smc91x_resources,
165 };
166
167 static struct platform_device lpd270_audio_device = {
168         .name           = "pxa2xx-ac97",
169         .id             = -1,
170 };
171
172 static struct resource lpd270_flash_resources[] = {
173         [0] = {
174                 .start  = PXA_CS0_PHYS,
175                 .end    = PXA_CS0_PHYS + SZ_64M - 1,
176                 .flags  = IORESOURCE_MEM,
177         },
178         [1] = {
179                 .start  = PXA_CS1_PHYS,
180                 .end    = PXA_CS1_PHYS + SZ_64M - 1,
181                 .flags  = IORESOURCE_MEM,
182         },
183 };
184
185 static struct mtd_partition lpd270_flash0_partitions[] = {
186         {
187                 .name =         "Bootloader",
188                 .size =         0x00040000,
189                 .offset =       0,
190                 .mask_flags =   MTD_WRITEABLE  /* force read-only */
191         }, {
192                 .name =         "Kernel",
193                 .size =         0x00400000,
194                 .offset =       0x00040000,
195         }, {
196                 .name =         "Filesystem",
197                 .size =         MTDPART_SIZ_FULL,
198                 .offset =       0x00440000
199         },
200 };
201
202 static struct flash_platform_data lpd270_flash_data[2] = {
203         {
204                 .name           = "processor-flash",
205                 .map_name       = "cfi_probe",
206                 .parts          = lpd270_flash0_partitions,
207                 .nr_parts       = ARRAY_SIZE(lpd270_flash0_partitions),
208         }, {
209                 .name           = "mainboard-flash",
210                 .map_name       = "cfi_probe",
211                 .parts          = NULL,
212                 .nr_parts       = 0,
213         }
214 };
215
216 static struct platform_device lpd270_flash_device[2] = {
217         {
218                 .name           = "pxa2xx-flash",
219                 .id             = 0,
220                 .dev = {
221                         .platform_data  = &lpd270_flash_data[0],
222                 },
223                 .resource       = &lpd270_flash_resources[0],
224                 .num_resources  = 1,
225         }, {
226                 .name           = "pxa2xx-flash",
227                 .id             = 1,
228                 .dev = {
229                         .platform_data  = &lpd270_flash_data[1],
230                 },
231                 .resource       = &lpd270_flash_resources[1],
232                 .num_resources  = 1,
233         },
234 };
235
236 static void lpd270_backlight_power(int on)
237 {
238         if (on) {
239                 pxa_gpio_mode(GPIO16_PWM0_MD);
240                 pxa_set_cken(CKEN_PWM0, 1);
241                 PWM_CTRL0 = 0;
242                 PWM_PWDUTY0 = 0x3ff;
243                 PWM_PERVAL0 = 0x3ff;
244         } else {
245                 PWM_CTRL0 = 0;
246                 PWM_PWDUTY0 = 0x0;
247                 PWM_PERVAL0 = 0x3FF;
248                 pxa_set_cken(CKEN_PWM0, 0);
249         }
250 }
251
252 /* 5.7" TFT QVGA (LoLo display number 1) */
253 static struct pxafb_mode_info sharp_lq057q3dc02_mode = {
254         .pixclock               = 150000,
255         .xres                   = 320,
256         .yres                   = 240,
257         .bpp                    = 16,
258         .hsync_len              = 0x14,
259         .left_margin            = 0x28,
260         .right_margin           = 0x0a,
261         .vsync_len              = 0x02,
262         .upper_margin           = 0x08,
263         .lower_margin           = 0x14,
264         .sync                   = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
265 };
266
267 static struct pxafb_mach_info sharp_lq057q3dc02 = {
268         .modes                  = &sharp_lq057q3dc02_mode,
269         .num_modes              = 1,
270         .lccr0                  = 0x07800080,
271         .lccr3                  = 0x00400000,
272         .pxafb_backlight_power  = lpd270_backlight_power,
273 };
274
275 /* 12.1" TFT SVGA (LoLo display number 2) */
276 static struct pxafb_mode_info sharp_lq121s1dg31_mode = {
277         .pixclock               = 50000,
278         .xres                   = 800,
279         .yres                   = 600,
280         .bpp                    = 16,
281         .hsync_len              = 0x05,
282         .left_margin            = 0x52,
283         .right_margin           = 0x05,
284         .vsync_len              = 0x04,
285         .upper_margin           = 0x14,
286         .lower_margin           = 0x0a,
287         .sync                   = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
288 };
289
290 static struct pxafb_mach_info sharp_lq121s1dg31 = {
291         .modes                  = &sharp_lq121s1dg31_mode,
292         .num_modes              = 1,
293         .lccr0                  = 0x07800080,
294         .lccr3                  = 0x00400000,
295         .pxafb_backlight_power  = lpd270_backlight_power,
296 };
297
298 /* 3.6" TFT QVGA (LoLo display number 3) */
299 static struct pxafb_mode_info sharp_lq036q1da01_mode = {
300         .pixclock               = 150000,
301         .xres                   = 320,
302         .yres                   = 240,
303         .bpp                    = 16,
304         .hsync_len              = 0x0e,
305         .left_margin            = 0x04,
306         .right_margin           = 0x0a,
307         .vsync_len              = 0x03,
308         .upper_margin           = 0x03,
309         .lower_margin           = 0x03,
310         .sync                   = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
311 };
312
313 static struct pxafb_mach_info sharp_lq036q1da01 = {
314         .modes                  = &sharp_lq036q1da01_mode,
315         .num_modes              = 1,
316         .lccr0                  = 0x07800080,
317         .lccr3                  = 0x00400000,
318         .pxafb_backlight_power  = lpd270_backlight_power,
319 };
320
321 /* 6.4" TFT VGA (LoLo display number 5) */
322 static struct pxafb_mode_info sharp_lq64d343_mode = {
323         .pixclock               = 25000,
324         .xres                   = 640,
325         .yres                   = 480,
326         .bpp                    = 16,
327         .hsync_len              = 0x31,
328         .left_margin            = 0x89,
329         .right_margin           = 0x19,
330         .vsync_len              = 0x12,
331         .upper_margin           = 0x22,
332         .lower_margin           = 0x00,
333         .sync                   = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
334 };
335
336 static struct pxafb_mach_info sharp_lq64d343 = {
337         .modes                  = &sharp_lq64d343_mode,
338         .num_modes              = 1,
339         .lccr0                  = 0x07800080,
340         .lccr3                  = 0x00400000,
341         .pxafb_backlight_power  = lpd270_backlight_power,
342 };
343
344 /* 10.4" TFT VGA (LoLo display number 7) */
345 static struct pxafb_mode_info sharp_lq10d368_mode = {
346         .pixclock               = 25000,
347         .xres                   = 640,
348         .yres                   = 480,
349         .bpp                    = 16,
350         .hsync_len              = 0x31,
351         .left_margin            = 0x89,
352         .right_margin           = 0x19,
353         .vsync_len              = 0x12,
354         .upper_margin           = 0x22,
355         .lower_margin           = 0x00,
356         .sync                   = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
357 };
358
359 static struct pxafb_mach_info sharp_lq10d368 = {
360         .modes                  = &sharp_lq10d368_mode,
361         .num_modes              = 1,
362         .lccr0                  = 0x07800080,
363         .lccr3                  = 0x00400000,
364         .pxafb_backlight_power  = lpd270_backlight_power,
365 };
366
367 /* 3.5" TFT QVGA (LoLo display number 8) */
368 static struct pxafb_mode_info sharp_lq035q7db02_20_mode = {
369         .pixclock               = 150000,
370         .xres                   = 240,
371         .yres                   = 320,
372         .bpp                    = 16,
373         .hsync_len              = 0x0e,
374         .left_margin            = 0x0a,
375         .right_margin           = 0x0a,
376         .vsync_len              = 0x03,
377         .upper_margin           = 0x05,
378         .lower_margin           = 0x14,
379         .sync                   = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
380 };
381
382 static struct pxafb_mach_info sharp_lq035q7db02_20 = {
383         .modes                  = &sharp_lq035q7db02_20_mode,
384         .num_modes              = 1,
385         .lccr0                  = 0x07800080,
386         .lccr3                  = 0x00400000,
387         .pxafb_backlight_power  = lpd270_backlight_power,
388 };
389
390 static struct pxafb_mach_info *lpd270_lcd_to_use;
391
392 static int __init lpd270_set_lcd(char *str)
393 {
394         if (!strnicmp(str, "lq057q3dc02", 11)) {
395                 lpd270_lcd_to_use = &sharp_lq057q3dc02;
396         } else if (!strnicmp(str, "lq121s1dg31", 11)) {
397                 lpd270_lcd_to_use = &sharp_lq121s1dg31;
398         } else if (!strnicmp(str, "lq036q1da01", 11)) {
399                 lpd270_lcd_to_use = &sharp_lq036q1da01;
400         } else if (!strnicmp(str, "lq64d343", 8)) {
401                 lpd270_lcd_to_use = &sharp_lq64d343;
402         } else if (!strnicmp(str, "lq10d368", 8)) {
403                 lpd270_lcd_to_use = &sharp_lq10d368;
404         } else if (!strnicmp(str, "lq035q7db02-20", 14)) {
405                 lpd270_lcd_to_use = &sharp_lq035q7db02_20;
406         } else {
407                 printk(KERN_INFO "lpd270: unknown lcd panel [%s]\n", str);
408         }
409
410         return 1;
411 }
412
413 __setup("lcd=", lpd270_set_lcd);
414
415 static struct platform_device *platform_devices[] __initdata = {
416         &smc91x_device,
417         &lpd270_audio_device,
418         &lpd270_flash_device[0],
419         &lpd270_flash_device[1],
420 };
421
422 static int lpd270_ohci_init(struct device *dev)
423 {
424         /* setup Port1 GPIO pin. */
425         pxa_gpio_mode(88 | GPIO_ALT_FN_1_IN);   /* USBHPWR1 */
426         pxa_gpio_mode(89 | GPIO_ALT_FN_2_OUT);  /* USBHPEN1 */
427
428         /* Set the Power Control Polarity Low and Power Sense
429            Polarity Low to active low. */
430         UHCHR = (UHCHR | UHCHR_PCPL | UHCHR_PSPL) &
431                 ~(UHCHR_SSEP1 | UHCHR_SSEP2 | UHCHR_SSEP3 | UHCHR_SSE);
432
433         return 0;
434 }
435
436 static struct pxaohci_platform_data lpd270_ohci_platform_data = {
437         .port_mode      = PMM_PERPORT_MODE,
438         .init           = lpd270_ohci_init,
439 };
440
441 static void __init lpd270_init(void)
442 {
443         lpd270_flash_data[0].width = (BOOT_DEF & 1) ? 2 : 4;
444         lpd270_flash_data[1].width = 4;
445
446         /*
447          * System bus arbiter setting:
448          * - Core_Park
449          * - LCD_wt:DMA_wt:CORE_Wt = 2:3:4
450          */
451         ARB_CNTRL = ARB_CORE_PARK | 0x234;
452
453         /*
454          * On LogicPD PXA270, we route AC97_SYSCLK via GPIO45.
455          */
456         pxa_gpio_mode(GPIO45_SYSCLK_AC97_MD);
457
458         platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices));
459
460         if (lpd270_lcd_to_use != NULL)
461                 set_pxa_fb_info(lpd270_lcd_to_use);
462
463         pxa_set_ohci_info(&lpd270_ohci_platform_data);
464 }
465
466
467 static struct map_desc lpd270_io_desc[] __initdata = {
468         {
469                 .virtual        = LPD270_CPLD_VIRT,
470                 .pfn            = __phys_to_pfn(LPD270_CPLD_PHYS),
471                 .length         = LPD270_CPLD_SIZE,
472                 .type           = MT_DEVICE,
473         },
474 };
475
476 static void __init lpd270_map_io(void)
477 {
478         pxa_map_io();
479         iotable_init(lpd270_io_desc, ARRAY_SIZE(lpd270_io_desc));
480
481         /* initialize sleep mode regs (wake-up sources, etc) */
482         PGSR0 = 0x00008800;
483         PGSR1 = 0x00000002;
484         PGSR2 = 0x0001FC00;
485         PGSR3 = 0x00001F81;
486         PWER  = 0xC0000002;
487         PRER  = 0x00000002;
488         PFER  = 0x00000002;
489
490         /* for use I SRAM as framebuffer.  */
491         PSLR |= 0x00000F04;
492         PCFR  = 0x00000066;
493 }
494
495 MACHINE_START(LOGICPD_PXA270, "LogicPD PXA270 Card Engine")
496         /* Maintainer: Peter Barada */
497         .phys_io        = 0x40000000,
498         .io_pg_offst    = (io_p2v(0x40000000) >> 18) & 0xfffc,
499         .boot_params    = 0xa0000100,
500         .map_io         = lpd270_map_io,
501         .init_irq       = lpd270_init_irq,
502         .timer          = &pxa_timer,
503         .init_machine   = lpd270_init,
504 MACHINE_END