1 #ifndef __ASM_ARM_SYSTEM_H
2 #define __ASM_ARM_SYSTEM_H
6 #include <linux/config.h>
9 * This is used to ensure the compiler did actually allocate the register we
10 * asked it for some inline assembly sequences. Apparently we can't trust
11 * the compiler from one version to another so a bit of paranoia won't hurt.
12 * This string is meant to be concatenated with the inline asm string and
13 * will cause compilation to stop on mismatch. (From ARM32 - may come in handy)
15 #define __asmeq(x, y) ".ifnc " x "," y " ; .err ; .endif\n\t"
19 #include <linux/linkage.h>
25 /* information about the system we're running on */
26 extern unsigned int system_rev;
27 extern unsigned int system_serial_low;
28 extern unsigned int system_serial_high;
29 extern unsigned int mem_fclk_21285;
33 * We need to turn the caches off before calling the reset vector - RiscOS
34 * messes up if we don't
36 #define proc_hard_reset() cpu_proc_fin()
42 void die(const char *msg, struct pt_regs *regs, int err)
43 __attribute__((noreturn));
45 void die_if_kernel(const char *str, struct pt_regs *regs, int err);
47 void hook_fault_code(int nr, int (*fn)(unsigned long, unsigned int,
49 int sig, const char *name);
51 #include <asm/proc-fns.h>
54 ((__typeof__(*(ptr)))__xchg((unsigned long)(x),(ptr),sizeof(*(ptr))))
56 #define tas(ptr) (xchg((ptr),1))
58 extern asmlinkage void __backtrace(void);
61 __asm__ __volatile__( \
62 "mcr p15, 0, %0, c1, c0, 0 @ set CR" \
68 __asm__ __volatile__( \
69 "mrc p15, 0, %0, c1, c0, 0 @ get CR" \
70 : "=r" (__val) : : "cc"); \
74 extern unsigned long cr_no_alignment; /* defined in entry-armv.S */
75 extern unsigned long cr_alignment; /* defined in entry-armv.S */
77 #define UDBG_UNDEFINED (1 << 0)
78 #define UDBG_SYSCALL (1 << 1)
79 #define UDBG_BADABORT (1 << 2)
80 #define UDBG_SEGV (1 << 3)
81 #define UDBG_BUS (1 << 4)
83 extern unsigned int user_debug;
85 #define vectors_base() (0)
87 #define mb() __asm__ __volatile__ ("" : : : "memory")
90 #define nop() __asm__ __volatile__("mov\tr0,r0\t@ nop\n\t");
92 #define read_barrier_depends() do { } while(0)
93 #define set_mb(var, value) do { var = value; mb(); } while (0)
94 #define set_wmb(var, value) do { var = value; wmb(); } while (0)
97 * We assume knowledge of how
98 * spin_unlock_irq() and friends are implemented. This avoids
99 * us needlessly decrementing and incrementing the preempt count.
101 #define prepare_arch_switch(rq,next) local_irq_enable()
102 #define finish_arch_switch(rq,prev) spin_unlock(&(rq)->lock)
103 #define task_running(rq,p) ((rq)->curr == (p))
106 * switch_to(prev, next) should switch from task `prev' to `next'
107 * `prev' will never be the same as `next'. schedule() itself
108 * contains the memory barrier to tell GCC not to cache `current'.
110 extern struct task_struct *__switch_to(struct task_struct *, struct thread_info *, struct thread_info *);
112 #define switch_to(prev,next,last) \
114 last = __switch_to(prev,prev->thread_info,next->thread_info); \
118 * Save the current interrupt enable state & disable IRQs
120 #define local_irq_save(x) \
122 unsigned long temp; \
123 __asm__ __volatile__( \
124 " mov %0, pc @ save_flags_cli\n" \
125 " orr %1, %0, #0x08000000\n" \
126 " and %0, %0, #0x0c000000\n" \
128 : "=r" (x), "=r" (temp) \
136 #define local_irq_enable() \
138 unsigned long temp; \
139 __asm__ __volatile__( \
140 " mov %0, pc @ sti\n" \
141 " bic %0, %0, #0x08000000\n" \
151 #define local_irq_disable() \
153 unsigned long temp; \
154 __asm__ __volatile__( \
155 " mov %0, pc @ cli\n" \
156 " orr %0, %0, #0x08000000\n" \
163 /* Enable FIQs (stf) */
165 #define __stf() do { \
166 unsigned long temp; \
167 __asm__ __volatile__( \
168 " mov %0, pc @ stf\n" \
169 " bic %0, %0, #0x04000000\n" \
174 /* Disable FIQs (clf) */
176 #define __clf() do { \
177 unsigned long temp; \
178 __asm__ __volatile__( \
179 " mov %0, pc @ clf\n" \
180 " orr %0, %0, #0x04000000\n" \
187 * Save the current interrupt enable state.
189 #define local_save_flags(x) \
191 __asm__ __volatile__( \
192 " mov %0, pc @ save_flags\n" \
193 " and %0, %0, #0x0c000000\n" \
199 * restore saved IRQ & FIQ state
201 #define local_irq_restore(x) \
203 unsigned long temp; \
204 __asm__ __volatile__( \
205 " mov %0, pc @ restore_flags\n" \
206 " bic %0, %0, #0x0c000000\n" \
207 " orr %0, %0, %1\n" \
216 #error SMP not supported
219 #define smp_mb() barrier()
220 #define smp_rmb() barrier()
221 #define smp_wmb() barrier()
222 #define smp_read_barrier_depends() do { } while(0)
224 #define clf() __clf()
225 #define stf() __stf()
227 #define irqs_disabled() \
229 unsigned long flags; \
230 local_save_flags(flags); \
234 static inline unsigned long __xchg(unsigned long x, volatile void *ptr, int size)
236 extern void __bad_xchg(volatile void *, int);
239 case 1: return cpu_xchg_1(x, ptr);
240 case 4: return cpu_xchg_4(x, ptr);
241 default: __bad_xchg(ptr, size);
246 #endif /* __ASSEMBLY__ */
248 #define arch_align_stack(x) (x)
250 #endif /* __KERNEL__ */