Merge git://git.infradead.org/mtd-2.6
[linux-2.6] / drivers / serial / uartlite.c
1 /*
2  * uartlite.c: Serial driver for Xilinx uartlite serial controller
3  *
4  * Peter Korsgaard <jacmet@sunsite.dk>
5  *
6  * This file is licensed under the terms of the GNU General Public License
7  * version 2.  This program is licensed "as is" without any warranty of any
8  * kind, whether express or implied.
9  */
10
11 #include <linux/platform_device.h>
12 #include <linux/module.h>
13 #include <linux/console.h>
14 #include <linux/serial.h>
15 #include <linux/serial_core.h>
16 #include <linux/tty.h>
17 #include <linux/delay.h>
18 #include <linux/interrupt.h>
19 #include <asm/io.h>
20
21 #define ULITE_MAJOR             204
22 #define ULITE_MINOR             187
23 #define ULITE_NR_UARTS          4
24
25 /* For register details see datasheet:
26    http://www.xilinx.com/bvdocs/ipcenter/data_sheet/opb_uartlite.pdf
27 */
28 #define ULITE_RX                0x00
29 #define ULITE_TX                0x04
30 #define ULITE_STATUS            0x08
31 #define ULITE_CONTROL           0x0c
32
33 #define ULITE_REGION            16
34
35 #define ULITE_STATUS_RXVALID    0x01
36 #define ULITE_STATUS_RXFULL     0x02
37 #define ULITE_STATUS_TXEMPTY    0x04
38 #define ULITE_STATUS_TXFULL     0x08
39 #define ULITE_STATUS_IE         0x10
40 #define ULITE_STATUS_OVERRUN    0x20
41 #define ULITE_STATUS_FRAME      0x40
42 #define ULITE_STATUS_PARITY     0x80
43
44 #define ULITE_CONTROL_RST_TX    0x01
45 #define ULITE_CONTROL_RST_RX    0x02
46 #define ULITE_CONTROL_IE        0x10
47
48
49 static struct uart_port ports[ULITE_NR_UARTS];
50
51 static int ulite_receive(struct uart_port *port, int stat)
52 {
53         struct tty_struct *tty = port->info->tty;
54         unsigned char ch = 0;
55         char flag = TTY_NORMAL;
56
57         if ((stat & (ULITE_STATUS_RXVALID | ULITE_STATUS_OVERRUN
58                      | ULITE_STATUS_FRAME)) == 0)
59                 return 0;
60
61         /* stats */
62         if (stat & ULITE_STATUS_RXVALID) {
63                 port->icount.rx++;
64                 ch = readb(port->membase + ULITE_RX);
65
66                 if (stat & ULITE_STATUS_PARITY)
67                         port->icount.parity++;
68         }
69
70         if (stat & ULITE_STATUS_OVERRUN)
71                 port->icount.overrun++;
72
73         if (stat & ULITE_STATUS_FRAME)
74                 port->icount.frame++;
75
76
77         /* drop byte with parity error if IGNPAR specificed */
78         if (stat & port->ignore_status_mask & ULITE_STATUS_PARITY)
79                 stat &= ~ULITE_STATUS_RXVALID;
80
81         stat &= port->read_status_mask;
82
83         if (stat & ULITE_STATUS_PARITY)
84                 flag = TTY_PARITY;
85
86
87         stat &= ~port->ignore_status_mask;
88
89         if (stat & ULITE_STATUS_RXVALID)
90                 tty_insert_flip_char(tty, ch, flag);
91
92         if (stat & ULITE_STATUS_FRAME)
93                 tty_insert_flip_char(tty, 0, TTY_FRAME);
94
95         if (stat & ULITE_STATUS_OVERRUN)
96                 tty_insert_flip_char(tty, 0, TTY_OVERRUN);
97
98         return 1;
99 }
100
101 static int ulite_transmit(struct uart_port *port, int stat)
102 {
103         struct circ_buf *xmit  = &port->info->xmit;
104
105         if (stat & ULITE_STATUS_TXFULL)
106                 return 0;
107
108         if (port->x_char) {
109                 writeb(port->x_char, port->membase + ULITE_TX);
110                 port->x_char = 0;
111                 port->icount.tx++;
112                 return 1;
113         }
114
115         if (uart_circ_empty(xmit) || uart_tx_stopped(port))
116                 return 0;
117
118         writeb(xmit->buf[xmit->tail], port->membase + ULITE_TX);
119         xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE-1);
120         port->icount.tx++;
121
122         /* wake up */
123         if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
124                 uart_write_wakeup(port);
125
126         return 1;
127 }
128
129 static irqreturn_t ulite_isr(int irq, void *dev_id)
130 {
131         struct uart_port *port = (struct uart_port *)dev_id;
132         int busy;
133
134         do {
135                 int stat = readb(port->membase + ULITE_STATUS);
136                 busy  = ulite_receive(port, stat);
137                 busy |= ulite_transmit(port, stat);
138         } while (busy);
139
140         tty_flip_buffer_push(port->info->tty);
141
142         return IRQ_HANDLED;
143 }
144
145 static unsigned int ulite_tx_empty(struct uart_port *port)
146 {
147         unsigned long flags;
148         unsigned int ret;
149
150         spin_lock_irqsave(&port->lock, flags);
151         ret = readb(port->membase + ULITE_STATUS);
152         spin_unlock_irqrestore(&port->lock, flags);
153
154         return ret & ULITE_STATUS_TXEMPTY ? TIOCSER_TEMT : 0;
155 }
156
157 static unsigned int ulite_get_mctrl(struct uart_port *port)
158 {
159         return TIOCM_CTS | TIOCM_DSR | TIOCM_CAR;
160 }
161
162 static void ulite_set_mctrl(struct uart_port *port, unsigned int mctrl)
163 {
164         /* N/A */
165 }
166
167 static void ulite_stop_tx(struct uart_port *port)
168 {
169         /* N/A */
170 }
171
172 static void ulite_start_tx(struct uart_port *port)
173 {
174         ulite_transmit(port, readb(port->membase + ULITE_STATUS));
175 }
176
177 static void ulite_stop_rx(struct uart_port *port)
178 {
179         /* don't forward any more data (like !CREAD) */
180         port->ignore_status_mask = ULITE_STATUS_RXVALID | ULITE_STATUS_PARITY
181                 | ULITE_STATUS_FRAME | ULITE_STATUS_OVERRUN;
182 }
183
184 static void ulite_enable_ms(struct uart_port *port)
185 {
186         /* N/A */
187 }
188
189 static void ulite_break_ctl(struct uart_port *port, int ctl)
190 {
191         /* N/A */
192 }
193
194 static int ulite_startup(struct uart_port *port)
195 {
196         int ret;
197
198         ret = request_irq(port->irq, ulite_isr,
199                           IRQF_DISABLED | IRQF_SAMPLE_RANDOM, "uartlite", port);
200         if (ret)
201                 return ret;
202
203         writeb(ULITE_CONTROL_RST_RX | ULITE_CONTROL_RST_TX,
204                port->membase + ULITE_CONTROL);
205         writeb(ULITE_CONTROL_IE, port->membase + ULITE_CONTROL);
206
207         return 0;
208 }
209
210 static void ulite_shutdown(struct uart_port *port)
211 {
212         writeb(0, port->membase + ULITE_CONTROL);
213         readb(port->membase + ULITE_CONTROL); /* dummy */
214         free_irq(port->irq, port);
215 }
216
217 static void ulite_set_termios(struct uart_port *port, struct ktermios *termios,
218                               struct ktermios *old)
219 {
220         unsigned long flags;
221         unsigned int baud;
222
223         spin_lock_irqsave(&port->lock, flags);
224
225         port->read_status_mask = ULITE_STATUS_RXVALID | ULITE_STATUS_OVERRUN
226                 | ULITE_STATUS_TXFULL;
227
228         if (termios->c_iflag & INPCK)
229                 port->read_status_mask |=
230                         ULITE_STATUS_PARITY | ULITE_STATUS_FRAME;
231
232         port->ignore_status_mask = 0;
233         if (termios->c_iflag & IGNPAR)
234                 port->ignore_status_mask |= ULITE_STATUS_PARITY
235                         | ULITE_STATUS_FRAME | ULITE_STATUS_OVERRUN;
236
237         /* ignore all characters if CREAD is not set */
238         if ((termios->c_cflag & CREAD) == 0)
239                 port->ignore_status_mask |=
240                         ULITE_STATUS_RXVALID | ULITE_STATUS_PARITY
241                         | ULITE_STATUS_FRAME | ULITE_STATUS_OVERRUN;
242
243         /* update timeout */
244         baud = uart_get_baud_rate(port, termios, old, 0, 460800);
245         uart_update_timeout(port, termios->c_cflag, baud);
246
247         spin_unlock_irqrestore(&port->lock, flags);
248 }
249
250 static const char *ulite_type(struct uart_port *port)
251 {
252         return port->type == PORT_UARTLITE ? "uartlite" : NULL;
253 }
254
255 static void ulite_release_port(struct uart_port *port)
256 {
257         release_mem_region(port->mapbase, ULITE_REGION);
258         iounmap(port->membase);
259         port->membase = NULL;
260 }
261
262 static int ulite_request_port(struct uart_port *port)
263 {
264         if (!request_mem_region(port->mapbase, ULITE_REGION, "uartlite")) {
265                 dev_err(port->dev, "Memory region busy\n");
266                 return -EBUSY;
267         }
268
269         port->membase = ioremap(port->mapbase, ULITE_REGION);
270         if (!port->membase) {
271                 dev_err(port->dev, "Unable to map registers\n");
272                 release_mem_region(port->mapbase, ULITE_REGION);
273                 return -EBUSY;
274         }
275
276         return 0;
277 }
278
279 static void ulite_config_port(struct uart_port *port, int flags)
280 {
281         if (!ulite_request_port(port))
282                 port->type = PORT_UARTLITE;
283 }
284
285 static int ulite_verify_port(struct uart_port *port, struct serial_struct *ser)
286 {
287         /* we don't want the core code to modify any port params */
288         return -EINVAL;
289 }
290
291 static struct uart_ops ulite_ops = {
292         .tx_empty       = ulite_tx_empty,
293         .set_mctrl      = ulite_set_mctrl,
294         .get_mctrl      = ulite_get_mctrl,
295         .stop_tx        = ulite_stop_tx,
296         .start_tx       = ulite_start_tx,
297         .stop_rx        = ulite_stop_rx,
298         .enable_ms      = ulite_enable_ms,
299         .break_ctl      = ulite_break_ctl,
300         .startup        = ulite_startup,
301         .shutdown       = ulite_shutdown,
302         .set_termios    = ulite_set_termios,
303         .type           = ulite_type,
304         .release_port   = ulite_release_port,
305         .request_port   = ulite_request_port,
306         .config_port    = ulite_config_port,
307         .verify_port    = ulite_verify_port
308 };
309
310 #ifdef CONFIG_SERIAL_UARTLITE_CONSOLE
311 static void ulite_console_wait_tx(struct uart_port *port)
312 {
313         int i;
314
315         /* wait up to 10ms for the character(s) to be sent */
316         for (i = 0; i < 10000; i++) {
317                 if (readb(port->membase + ULITE_STATUS) & ULITE_STATUS_TXEMPTY)
318                         break;
319                 udelay(1);
320         }
321 }
322
323 static void ulite_console_putchar(struct uart_port *port, int ch)
324 {
325         ulite_console_wait_tx(port);
326         writeb(ch, port->membase + ULITE_TX);
327 }
328
329 static void ulite_console_write(struct console *co, const char *s,
330                                 unsigned int count)
331 {
332         struct uart_port *port = &ports[co->index];
333         unsigned long flags;
334         unsigned int ier;
335         int locked = 1;
336
337         if (oops_in_progress) {
338                 locked = spin_trylock_irqsave(&port->lock, flags);
339         } else
340                 spin_lock_irqsave(&port->lock, flags);
341
342         /* save and disable interrupt */
343         ier = readb(port->membase + ULITE_STATUS) & ULITE_STATUS_IE;
344         writeb(0, port->membase + ULITE_CONTROL);
345
346         uart_console_write(port, s, count, ulite_console_putchar);
347
348         ulite_console_wait_tx(port);
349
350         /* restore interrupt state */
351         if (ier)
352                 writeb(ULITE_CONTROL_IE, port->membase + ULITE_CONTROL);
353
354         if (locked)
355                 spin_unlock_irqrestore(&port->lock, flags);
356 }
357
358 static int __init ulite_console_setup(struct console *co, char *options)
359 {
360         struct uart_port *port;
361         int baud = 9600;
362         int bits = 8;
363         int parity = 'n';
364         int flow = 'n';
365
366         if (co->index < 0 || co->index >= ULITE_NR_UARTS)
367                 return -EINVAL;
368
369         port = &ports[co->index];
370
371         /* not initialized yet? */
372         if (!port->membase)
373                 return -ENODEV;
374
375         if (options)
376                 uart_parse_options(options, &baud, &parity, &bits, &flow);
377
378         return uart_set_options(port, co, baud, parity, bits, flow);
379 }
380
381 static struct uart_driver ulite_uart_driver;
382
383 static struct console ulite_console = {
384         .name   = "ttyUL",
385         .write  = ulite_console_write,
386         .device = uart_console_device,
387         .setup  = ulite_console_setup,
388         .flags  = CON_PRINTBUFFER,
389         .index  = -1, /* Specified on the cmdline (e.g. console=ttyUL0 ) */
390         .data   = &ulite_uart_driver,
391 };
392
393 static int __init ulite_console_init(void)
394 {
395         register_console(&ulite_console);
396         return 0;
397 }
398
399 console_initcall(ulite_console_init);
400
401 #endif /* CONFIG_SERIAL_UARTLITE_CONSOLE */
402
403 static struct uart_driver ulite_uart_driver = {
404         .owner          = THIS_MODULE,
405         .driver_name    = "uartlite",
406         .dev_name       = "ttyUL",
407         .major          = ULITE_MAJOR,
408         .minor          = ULITE_MINOR,
409         .nr             = ULITE_NR_UARTS,
410 #ifdef CONFIG_SERIAL_UARTLITE_CONSOLE
411         .cons           = &ulite_console,
412 #endif
413 };
414
415 static int __devinit ulite_probe(struct platform_device *pdev)
416 {
417         struct resource *res, *res2;
418         struct uart_port *port;
419
420         if (pdev->id < 0 || pdev->id >= ULITE_NR_UARTS)
421                 return -EINVAL;
422
423         if (ports[pdev->id].membase)
424                 return -EBUSY;
425
426         res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
427         if (!res)
428                 return -ENODEV;
429
430         res2 = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
431         if (!res2)
432                 return -ENODEV;
433
434         port = &ports[pdev->id];
435
436         port->fifosize  = 16;
437         port->regshift  = 2;
438         port->iotype    = UPIO_MEM;
439         port->iobase    = 1; /* mark port in use */
440         port->mapbase   = res->start;
441         port->membase   = NULL;
442         port->ops       = &ulite_ops;
443         port->irq       = res2->start;
444         port->flags     = UPF_BOOT_AUTOCONF;
445         port->dev       = &pdev->dev;
446         port->type      = PORT_UNKNOWN;
447         port->line      = pdev->id;
448
449         uart_add_one_port(&ulite_uart_driver, port);
450         platform_set_drvdata(pdev, port);
451
452         return 0;
453 }
454
455 static int ulite_remove(struct platform_device *pdev)
456 {
457         struct uart_port *port = platform_get_drvdata(pdev);
458
459         platform_set_drvdata(pdev, NULL);
460
461         if (port)
462                 uart_remove_one_port(&ulite_uart_driver, port);
463
464         /* mark port as free */
465         port->membase = NULL;
466
467         return 0;
468 }
469
470 static struct platform_driver ulite_platform_driver = {
471         .probe  = ulite_probe,
472         .remove = ulite_remove,
473         .driver = {
474                    .owner = THIS_MODULE,
475                    .name  = "uartlite",
476                    },
477 };
478
479 int __init ulite_init(void)
480 {
481         int ret;
482
483         ret = uart_register_driver(&ulite_uart_driver);
484         if (ret)
485                 return ret;
486
487         ret = platform_driver_register(&ulite_platform_driver);
488         if (ret)
489                 uart_unregister_driver(&ulite_uart_driver);
490
491         return ret;
492 }
493
494 void __exit ulite_exit(void)
495 {
496         platform_driver_unregister(&ulite_platform_driver);
497         uart_unregister_driver(&ulite_uart_driver);
498 }
499
500 module_init(ulite_init);
501 module_exit(ulite_exit);
502
503 MODULE_AUTHOR("Peter Korsgaard <jacmet@sunsite.dk>");
504 MODULE_DESCRIPTION("Xilinx uartlite serial driver");
505 MODULE_LICENSE("GPL");