git.oblomov.eu Git - linux-2.6/blob - drivers/hwmon/thmc50.c

   1 /*
   2     thmc50.c - Part of lm_sensors, Linux kernel modules for hardware
   3              monitoring
   4     Copyright (C) 2007 Krzysztof Helt <krzysztof.h1@wp.pl>
   5     Based on 2.4 driver by Frodo Looijaard <frodol@dds.nl> and
   6     Philip Edelbrock <phil@netroedge.com>
   7
   8     This program is free software; you can redistribute it and/or modify
   9     it under the terms of the GNU General Public License as published by
  10     the Free Software Foundation; either version 2 of the License, or
  11     (at your option) any later version.
  12
  13     This program is distributed in the hope that it will be useful,
  14     but WITHOUT ANY WARRANTY; without even the implied warranty of
  15     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  16     GNU General Public License for more details.
  17
  18     You should have received a copy of the GNU General Public License
  19     along with this program; if not, write to the Free Software
  20     Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
  21 */
  22
  23 #include <linux/module.h>
  24 #include <linux/init.h>
  25 #include <linux/slab.h>
  26 #include <linux/i2c.h>
  27 #include <linux/hwmon.h>
  28 #include <linux/hwmon-sysfs.h>
  29 #include <linux/err.h>
  30 #include <linux/mutex.h>
  31
  32 MODULE_LICENSE("GPL");
  33
  34 /* Addresses to scan */
  35 static unsigned short normal_i2c[] = { 0x2c, 0x2d, 0x2e, I2C_CLIENT_END };
  36
  37 /* Insmod parameters */
  38 I2C_CLIENT_INSMOD_2(thmc50, adm1022);
  39 I2C_CLIENT_MODULE_PARM(adm1022_temp3, "List of adapter,address pairs "
  40                         "to enable 3rd temperature (ADM1022 only)");
  41
  42 /* Many THMC50 constants specified below */
  43
  44 /* The THMC50 registers */
  45 #define THMC50_REG_CONF                         0x40
  46 #define THMC50_REG_COMPANY_ID                   0x3E
  47 #define THMC50_REG_DIE_CODE                     0x3F
  48 #define THMC50_REG_ANALOG_OUT                   0x19
  49 /*
  50  * The mirror status register cannot be used as
  51  * reading it does not clear alarms.
  52  */
  53 #define THMC50_REG_INTR                         0x41
  54
  55 const static u8 THMC50_REG_TEMP[] = { 0x27, 0x26, 0x20 };
  56 const static u8 THMC50_REG_TEMP_MIN[] = { 0x3A, 0x38, 0x2C };
  57 const static u8 THMC50_REG_TEMP_MAX[] = { 0x39, 0x37, 0x2B };
  58
  59 #define THMC50_REG_CONF_nFANOFF                 0x20
  60
  61 /* Each client has this additional data */
  62 struct thmc50_data {
  63         struct i2c_client client;
  64         struct device *hwmon_dev;
  65
  66         struct mutex update_lock;
  67         enum chips type;
  68         unsigned long last_updated;     /* In jiffies */
  69         char has_temp3;         /* !=0 if it is ADM1022 in temp3 mode */
  70         char valid;             /* !=0 if following fields are valid */
  71
  72         /* Register values */
  73         s8 temp_input[3];
  74         s8 temp_max[3];
  75         s8 temp_min[3];
  76         u8 analog_out;
  77         u8 alarms;
  78 };
  79
  80 static int thmc50_attach_adapter(struct i2c_adapter *adapter);
  81 static int thmc50_detach_client(struct i2c_client *client);
  82 static void thmc50_init_client(struct i2c_client *client);
  83 static struct thmc50_data *thmc50_update_device(struct device *dev);
  84
  85 static struct i2c_driver thmc50_driver = {
  86         .driver = {
  87                 .name = "thmc50",
  88         },
  89         .attach_adapter = thmc50_attach_adapter,
  90         .detach_client = thmc50_detach_client,
  91 };
  92
  93 static ssize_t show_analog_out(struct device *dev,
  94                                struct device_attribute *attr, char *buf)
  95 {
  96         struct thmc50_data *data = thmc50_update_device(dev);
  97         return sprintf(buf, "%d\n", data->analog_out);
  98 }
  99
 100 static ssize_t set_analog_out(struct device *dev,
 101                               struct device_attribute *attr,
 102                               const char *buf, size_t count)
 103 {
 104         struct i2c_client *client = to_i2c_client(dev);
 105         struct thmc50_data *data = i2c_get_clientdata(client);
 106         int tmp = simple_strtoul(buf, NULL, 10);
 107         int config;
 108
 109         mutex_lock(&data->update_lock);
 110         data->analog_out = SENSORS_LIMIT(tmp, 0, 255);
 111         i2c_smbus_write_byte_data(client, THMC50_REG_ANALOG_OUT,
 112                                   data->analog_out);
 113
 114         config = i2c_smbus_read_byte_data(client, THMC50_REG_CONF);
 115         if (data->analog_out == 0)
 116                 config &= ~THMC50_REG_CONF_nFANOFF;
 117         else
 118                 config |= THMC50_REG_CONF_nFANOFF;
 119         i2c_smbus_write_byte_data(client, THMC50_REG_CONF, config);
 120
 121         mutex_unlock(&data->update_lock);
 122         return count;
 123 }
 124
 125 /* There is only one PWM mode = DC */
 126 static ssize_t show_pwm_mode(struct device *dev, struct device_attribute *attr,
 127                              char *buf)
 128 {
 129         return sprintf(buf, "0\n");
 130 }
 131
 132 /* Temperatures */
 133 static ssize_t show_temp(struct device *dev, struct device_attribute *attr,
 134                          char *buf)
 135 {
 136         int nr = to_sensor_dev_attr(attr)->index;
 137         struct thmc50_data *data = thmc50_update_device(dev);
 138         return sprintf(buf, "%d\n", data->temp_input[nr] * 1000);
 139 }
 140
 141 static ssize_t show_temp_min(struct device *dev, struct device_attribute *attr,
 142                              char *buf)
 143 {
 144         int nr = to_sensor_dev_attr(attr)->index;
 145         struct thmc50_data *data = thmc50_update_device(dev);
 146         return sprintf(buf, "%d\n", data->temp_min[nr] * 1000);
 147 }
 148
 149 static ssize_t set_temp_min(struct device *dev, struct device_attribute *attr,
 150                             const char *buf, size_t count)
 151 {
 152         int nr = to_sensor_dev_attr(attr)->index;
 153         struct i2c_client *client = to_i2c_client(dev);
 154         struct thmc50_data *data = i2c_get_clientdata(client);
 155         int val = simple_strtol(buf, NULL, 10);
 156
 157         mutex_lock(&data->update_lock);
 158         data->temp_min[nr] = SENSORS_LIMIT(val / 1000, -128, 127);
 159         i2c_smbus_write_byte_data(client, THMC50_REG_TEMP_MIN[nr],
 160                                   data->temp_min[nr]);
 161         mutex_unlock(&data->update_lock);
 162         return count;
 163 }
 164
 165 static ssize_t show_temp_max(struct device *dev, struct device_attribute *attr,
 166                              char *buf)
 167 {
 168         int nr = to_sensor_dev_attr(attr)->index;
 169         struct thmc50_data *data = thmc50_update_device(dev);
 170         return sprintf(buf, "%d\n", data->temp_max[nr] * 1000);
 171 }
 172
 173 static ssize_t set_temp_max(struct device *dev, struct device_attribute *attr,
 174                             const char *buf, size_t count)
 175 {
 176         int nr = to_sensor_dev_attr(attr)->index;
 177         struct i2c_client *client = to_i2c_client(dev);
 178         struct thmc50_data *data = i2c_get_clientdata(client);
 179         int val = simple_strtol(buf, NULL, 10);
 180
 181         mutex_lock(&data->update_lock);
 182         data->temp_max[nr] = SENSORS_LIMIT(val / 1000, -128, 127);
 183         i2c_smbus_write_byte_data(client, THMC50_REG_TEMP_MAX[nr],
 184                                   data->temp_max[nr]);
 185         mutex_unlock(&data->update_lock);
 186         return count;
 187 }
 188
 189 static ssize_t show_alarm(struct device *dev, struct device_attribute *attr,
 190                           char *buf)
 191 {
 192         int index = to_sensor_dev_attr(attr)->index;
 193         struct thmc50_data *data = thmc50_update_device(dev);
 194
 195         return sprintf(buf, "%u\n", (data->alarms >> index) & 1);
 196 }
 197
 198 #define temp_reg(offset)                                                \
 199 static SENSOR_DEVICE_ATTR(temp##offset##_input, S_IRUGO, show_temp,     \
 200                         NULL, offset - 1);                              \
 201 static SENSOR_DEVICE_ATTR(temp##offset##_min, S_IRUGO | S_IWUSR,        \
 202                         show_temp_min, set_temp_min, offset - 1);       \
 203 static SENSOR_DEVICE_ATTR(temp##offset##_max, S_IRUGO | S_IWUSR,        \
 204                         show_temp_max, set_temp_max, offset - 1);
 205
 206 temp_reg(1);
 207 temp_reg(2);
 208 temp_reg(3);
 209
 210 static SENSOR_DEVICE_ATTR(temp1_alarm, S_IRUGO, show_alarm, NULL, 0);
 211 static SENSOR_DEVICE_ATTR(temp2_alarm, S_IRUGO, show_alarm, NULL, 5);
 212 static SENSOR_DEVICE_ATTR(temp3_alarm, S_IRUGO, show_alarm, NULL, 1);
 213 static SENSOR_DEVICE_ATTR(temp2_fault, S_IRUGO, show_alarm, NULL, 7);
 214 static SENSOR_DEVICE_ATTR(temp3_fault, S_IRUGO, show_alarm, NULL, 2);
 215
 216 static SENSOR_DEVICE_ATTR(pwm1, S_IRUGO | S_IWUSR, show_analog_out,
 217                           set_analog_out, 0);
 218 static SENSOR_DEVICE_ATTR(pwm1_mode, S_IRUGO, show_pwm_mode, NULL, 0);
 219
 220 static struct attribute *thmc50_attributes[] = {
 221         &sensor_dev_attr_temp1_max.dev_attr.attr,
 222         &sensor_dev_attr_temp1_min.dev_attr.attr,
 223         &sensor_dev_attr_temp1_input.dev_attr.attr,
 224         &sensor_dev_attr_temp1_alarm.dev_attr.attr,
 225         &sensor_dev_attr_temp2_max.dev_attr.attr,
 226         &sensor_dev_attr_temp2_min.dev_attr.attr,
 227         &sensor_dev_attr_temp2_input.dev_attr.attr,
 228         &sensor_dev_attr_temp2_alarm.dev_attr.attr,
 229         &sensor_dev_attr_temp2_fault.dev_attr.attr,
 230         &sensor_dev_attr_pwm1.dev_attr.attr,
 231         &sensor_dev_attr_pwm1_mode.dev_attr.attr,
 232         NULL
 233 };
 234
 235 static const struct attribute_group thmc50_group = {
 236         .attrs = thmc50_attributes,
 237 };
 238
 239 /* for ADM1022 3rd temperature mode */
 240 static struct attribute *temp3_attributes[] = {
 241         &sensor_dev_attr_temp3_max.dev_attr.attr,
 242         &sensor_dev_attr_temp3_min.dev_attr.attr,
 243         &sensor_dev_attr_temp3_input.dev_attr.attr,
 244         &sensor_dev_attr_temp3_alarm.dev_attr.attr,
 245         &sensor_dev_attr_temp3_fault.dev_attr.attr,
 246         NULL
 247 };
 248
 249 static const struct attribute_group temp3_group = {
 250         .attrs = temp3_attributes,
 251 };
 252
 253 static int thmc50_detect(struct i2c_adapter *adapter, int address, int kind)
 254 {
 255         unsigned company;
 256         unsigned revision;
 257         unsigned config;
 258         struct i2c_client *client;
 259         struct thmc50_data *data;
 260         struct device *dev;
 261         int err = 0;
 262         const char *type_name;
 263
 264         if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA)) {
 265                 pr_debug("thmc50: detect failed, "
 266                          "smbus byte data not supported!\n");
 267                 goto exit;
 268         }
 269
 270         /* OK. For now, we presume we have a valid client. We now create the
 271            client structure, even though we cannot fill it completely yet.
 272            But it allows us to access thmc50 registers. */
 273         if (!(data = kzalloc(sizeof(struct thmc50_data), GFP_KERNEL))) {
 274                 pr_debug("thmc50: detect failed, kzalloc failed!\n");
 275                 err = -ENOMEM;
 276                 goto exit;
 277         }
 278
 279         client = &data->client;
 280         i2c_set_clientdata(client, data);
 281         client->addr = address;
 282         client->adapter = adapter;
 283         client->driver = &thmc50_driver;
 284         dev = &client->dev;
 285
 286         pr_debug("thmc50: Probing for THMC50 at 0x%2X on bus %d\n",
 287                  client->addr, i2c_adapter_id(client->adapter));
 288
 289         /* Now, we do the remaining detection. */
 290         company = i2c_smbus_read_byte_data(client, THMC50_REG_COMPANY_ID);
 291         revision = i2c_smbus_read_byte_data(client, THMC50_REG_DIE_CODE);
 292         config = i2c_smbus_read_byte_data(client, THMC50_REG_CONF);
 293
 294         if (kind == 0)
 295                 kind = thmc50;
 296         else if (kind < 0) {
 297                 err = -ENODEV;
 298                 if (revision >= 0xc0 && ((config & 0x10) == 0)) {
 299                         if (company == 0x49) {
 300                                 kind = thmc50;
 301                                 err = 0;
 302                         } else if (company == 0x41) {
 303                                 kind = adm1022;
 304                                 err = 0;
 305                         }
 306                 }
 307         }
 308         if (err == -ENODEV) {
 309                 pr_debug("thmc50: Detection of THMC50/ADM1022 failed\n");
 310                 goto exit_free;
 311         }
 312         data->type = kind;
 313
 314         if (kind == adm1022) {
 315                 int id = i2c_adapter_id(client->adapter);
 316                 int i;
 317
 318                 type_name = "adm1022";
 319                 data->has_temp3 = (config >> 7) & 1;    /* config MSB */
 320                 for (i = 0; i + 1 < adm1022_temp3_num; i += 2)
 321                         if (adm1022_temp3[i] == id &&
 322                             adm1022_temp3[i + 1] == address) {
 323                                 /* enable 2nd remote temp */
 324                                 data->has_temp3 = 1;
 325                                 break;
 326                         }
 327         } else {
 328                 type_name = "thmc50";
 329         }
 330         pr_debug("thmc50: Detected %s (version %x, revision %x)\n",
 331                  type_name, (revision >> 4) - 0xc, revision & 0xf);
 332
 333         /* Fill in the remaining client fields & put it into the global list */
 334         strlcpy(client->name, type_name, I2C_NAME_SIZE);
 335         mutex_init(&data->update_lock);
 336
 337         /* Tell the I2C layer a new client has arrived */
 338         if ((err = i2c_attach_client(client)))
 339                 goto exit_free;
 340
 341         thmc50_init_client(client);
 342
 343         /* Register sysfs hooks */
 344         if ((err = sysfs_create_group(&client->dev.kobj, &thmc50_group)))
 345                 goto exit_detach;
 346
 347         /* Register ADM1022 sysfs hooks */
 348         if (data->has_temp3)
 349                 if ((err = sysfs_create_group(&client->dev.kobj,
 350                                               &temp3_group)))
 351                         goto exit_remove_sysfs_thmc50;
 352
 353         /* Register a new directory entry with module sensors */
 354         data->hwmon_dev = hwmon_device_register(&client->dev);
 355         if (IS_ERR(data->hwmon_dev)) {
 356                 err = PTR_ERR(data->hwmon_dev);
 357                 goto exit_remove_sysfs;
 358         }
 359
 360         return 0;
 361
 362 exit_remove_sysfs:
 363         if (data->has_temp3)
 364                 sysfs_remove_group(&client->dev.kobj, &temp3_group);
 365 exit_remove_sysfs_thmc50:
 366         sysfs_remove_group(&client->dev.kobj, &thmc50_group);
 367 exit_detach:
 368         i2c_detach_client(client);
 369 exit_free:
 370         kfree(data);
 371 exit:
 372         return err;
 373 }
 374
 375 static int thmc50_attach_adapter(struct i2c_adapter *adapter)
 376 {
 377         if (!(adapter->class & I2C_CLASS_HWMON))
 378                 return 0;
 379         return i2c_probe(adapter, &addr_data, thmc50_detect);
 380 }
 381
 382 static int thmc50_detach_client(struct i2c_client *client)
 383 {
 384         struct thmc50_data *data = i2c_get_clientdata(client);
 385         int err;
 386
 387         hwmon_device_unregister(data->hwmon_dev);
 388         sysfs_remove_group(&client->dev.kobj, &thmc50_group);
 389         if (data->has_temp3)
 390                 sysfs_remove_group(&client->dev.kobj, &temp3_group);
 391
 392         if ((err = i2c_detach_client(client)))
 393                 return err;
 394
 395         kfree(data);
 396
 397         return 0;
 398 }
 399
 400 static void thmc50_init_client(struct i2c_client *client)
 401 {
 402         struct thmc50_data *data = i2c_get_clientdata(client);
 403         int config;
 404
 405         data->analog_out = i2c_smbus_read_byte_data(client,
 406                                                     THMC50_REG_ANALOG_OUT);
 407         /* set up to at least 1 */
 408         if (data->analog_out == 0) {
 409                 data->analog_out = 1;
 410                 i2c_smbus_write_byte_data(client, THMC50_REG_ANALOG_OUT,
 411                                           data->analog_out);
 412         }
 413         config = i2c_smbus_read_byte_data(client, THMC50_REG_CONF);
 414         config |= 0x1;  /* start the chip if it is in standby mode */
 415         if (data->has_temp3)
 416                 config |= 0x80;         /* enable 2nd remote temp */
 417         i2c_smbus_write_byte_data(client, THMC50_REG_CONF, config);
 418 }
 419
 420 static struct thmc50_data *thmc50_update_device(struct device *dev)
 421 {
 422         struct i2c_client *client = to_i2c_client(dev);
 423         struct thmc50_data *data = i2c_get_clientdata(client);
 424         int timeout = HZ / 5 + (data->type == thmc50 ? HZ : 0);
 425
 426         mutex_lock(&data->update_lock);
 427
 428         if (time_after(jiffies, data->last_updated + timeout)
 429             || !data->valid) {
 430
 431                 int temps = data->has_temp3 ? 3 : 2;
 432                 int i;
 433                 for (i = 0; i < temps; i++) {
 434                         data->temp_input[i] = i2c_smbus_read_byte_data(client,
 435                                                 THMC50_REG_TEMP[i]);
 436                         data->temp_max[i] = i2c_smbus_read_byte_data(client,
 437                                                 THMC50_REG_TEMP_MAX[i]);
 438                         data->temp_min[i] = i2c_smbus_read_byte_data(client,
 439                                                 THMC50_REG_TEMP_MIN[i]);
 440                 }
 441                 data->analog_out =
 442                     i2c_smbus_read_byte_data(client, THMC50_REG_ANALOG_OUT);
 443                 data->alarms =
 444                     i2c_smbus_read_byte_data(client, THMC50_REG_INTR);
 445                 data->last_updated = jiffies;
 446                 data->valid = 1;
 447         }
 448
 449         mutex_unlock(&data->update_lock);
 450
 451         return data;
 452 }
 453
 454 static int __init sm_thmc50_init(void)
 455 {
 456         return i2c_add_driver(&thmc50_driver);
 457 }
 458
 459 static void __exit sm_thmc50_exit(void)
 460 {
 461         i2c_del_driver(&thmc50_driver);
 462 }
 463
 464 MODULE_AUTHOR("Krzysztof Helt <krzysztof.h1@wp.pl>");
 465 MODULE_DESCRIPTION("THMC50 driver");
 466
 467 module_init(sm_thmc50_init);
 468 module_exit(sm_thmc50_exit);