Merge branch 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux-2.6
[linux-2.6] / drivers / ide / pci / aec62xx.c
1 /*
2  * linux/drivers/ide/pci/aec62xx.c              Version 0.24    May 24, 2007
3  *
4  * Copyright (C) 1999-2002      Andre Hedrick <andre@linux-ide.org>
5  * Copyright (C) 2007           MontaVista Software, Inc. <source@mvista.com>
6  *
7  */
8
9 #include <linux/module.h>
10 #include <linux/types.h>
11 #include <linux/pci.h>
12 #include <linux/delay.h>
13 #include <linux/hdreg.h>
14 #include <linux/ide.h>
15 #include <linux/init.h>
16
17 #include <asm/io.h>
18
19 struct chipset_bus_clock_list_entry {
20         u8 xfer_speed;
21         u8 chipset_settings;
22         u8 ultra_settings;
23 };
24
25 static const struct chipset_bus_clock_list_entry aec6xxx_33_base [] = {
26         {       XFER_UDMA_6,    0x31,   0x07    },
27         {       XFER_UDMA_5,    0x31,   0x06    },
28         {       XFER_UDMA_4,    0x31,   0x05    },
29         {       XFER_UDMA_3,    0x31,   0x04    },
30         {       XFER_UDMA_2,    0x31,   0x03    },
31         {       XFER_UDMA_1,    0x31,   0x02    },
32         {       XFER_UDMA_0,    0x31,   0x01    },
33
34         {       XFER_MW_DMA_2,  0x31,   0x00    },
35         {       XFER_MW_DMA_1,  0x31,   0x00    },
36         {       XFER_MW_DMA_0,  0x0a,   0x00    },
37         {       XFER_PIO_4,     0x31,   0x00    },
38         {       XFER_PIO_3,     0x33,   0x00    },
39         {       XFER_PIO_2,     0x08,   0x00    },
40         {       XFER_PIO_1,     0x0a,   0x00    },
41         {       XFER_PIO_0,     0x00,   0x00    },
42         {       0,              0x00,   0x00    }
43 };
44
45 static const struct chipset_bus_clock_list_entry aec6xxx_34_base [] = {
46         {       XFER_UDMA_6,    0x41,   0x06    },
47         {       XFER_UDMA_5,    0x41,   0x05    },
48         {       XFER_UDMA_4,    0x41,   0x04    },
49         {       XFER_UDMA_3,    0x41,   0x03    },
50         {       XFER_UDMA_2,    0x41,   0x02    },
51         {       XFER_UDMA_1,    0x41,   0x01    },
52         {       XFER_UDMA_0,    0x41,   0x01    },
53
54         {       XFER_MW_DMA_2,  0x41,   0x00    },
55         {       XFER_MW_DMA_1,  0x42,   0x00    },
56         {       XFER_MW_DMA_0,  0x7a,   0x00    },
57         {       XFER_PIO_4,     0x41,   0x00    },
58         {       XFER_PIO_3,     0x43,   0x00    },
59         {       XFER_PIO_2,     0x78,   0x00    },
60         {       XFER_PIO_1,     0x7a,   0x00    },
61         {       XFER_PIO_0,     0x70,   0x00    },
62         {       0,              0x00,   0x00    }
63 };
64
65 #define BUSCLOCK(D)     \
66         ((struct chipset_bus_clock_list_entry *) pci_get_drvdata((D)))
67
68
69 /*
70  * TO DO: active tuning and correction of cards without a bios.
71  */
72 static u8 pci_bus_clock_list (u8 speed, struct chipset_bus_clock_list_entry * chipset_table)
73 {
74         for ( ; chipset_table->xfer_speed ; chipset_table++)
75                 if (chipset_table->xfer_speed == speed) {
76                         return chipset_table->chipset_settings;
77                 }
78         return chipset_table->chipset_settings;
79 }
80
81 static u8 pci_bus_clock_list_ultra (u8 speed, struct chipset_bus_clock_list_entry * chipset_table)
82 {
83         for ( ; chipset_table->xfer_speed ; chipset_table++)
84                 if (chipset_table->xfer_speed == speed) {
85                         return chipset_table->ultra_settings;
86                 }
87         return chipset_table->ultra_settings;
88 }
89
90 static void aec6210_set_mode(ide_drive_t *drive, const u8 speed)
91 {
92         ide_hwif_t *hwif        = HWIF(drive);
93         struct pci_dev *dev     = hwif->pci_dev;
94         u16 d_conf              = 0;
95         u8 ultra = 0, ultra_conf = 0;
96         u8 tmp0 = 0, tmp1 = 0, tmp2 = 0;
97         unsigned long flags;
98
99         local_irq_save(flags);
100         /* 0x40|(2*drive->dn): Active, 0x41|(2*drive->dn): Recovery */
101         pci_read_config_word(dev, 0x40|(2*drive->dn), &d_conf);
102         tmp0 = pci_bus_clock_list(speed, BUSCLOCK(dev));
103         d_conf = ((tmp0 & 0xf0) << 4) | (tmp0 & 0xf);
104         pci_write_config_word(dev, 0x40|(2*drive->dn), d_conf);
105
106         tmp1 = 0x00;
107         tmp2 = 0x00;
108         pci_read_config_byte(dev, 0x54, &ultra);
109         tmp1 = ((0x00 << (2*drive->dn)) | (ultra & ~(3 << (2*drive->dn))));
110         ultra_conf = pci_bus_clock_list_ultra(speed, BUSCLOCK(dev));
111         tmp2 = ((ultra_conf << (2*drive->dn)) | (tmp1 & ~(3 << (2*drive->dn))));
112         pci_write_config_byte(dev, 0x54, tmp2);
113         local_irq_restore(flags);
114 }
115
116 static void aec6260_set_mode(ide_drive_t *drive, const u8 speed)
117 {
118         ide_hwif_t *hwif        = HWIF(drive);
119         struct pci_dev *dev     = hwif->pci_dev;
120         u8 unit         = (drive->select.b.unit & 0x01);
121         u8 tmp1 = 0, tmp2 = 0;
122         u8 ultra = 0, drive_conf = 0, ultra_conf = 0;
123         unsigned long flags;
124
125         local_irq_save(flags);
126         /* high 4-bits: Active, low 4-bits: Recovery */
127         pci_read_config_byte(dev, 0x40|drive->dn, &drive_conf);
128         drive_conf = pci_bus_clock_list(speed, BUSCLOCK(dev));
129         pci_write_config_byte(dev, 0x40|drive->dn, drive_conf);
130
131         pci_read_config_byte(dev, (0x44|hwif->channel), &ultra);
132         tmp1 = ((0x00 << (4*unit)) | (ultra & ~(7 << (4*unit))));
133         ultra_conf = pci_bus_clock_list_ultra(speed, BUSCLOCK(dev));
134         tmp2 = ((ultra_conf << (4*unit)) | (tmp1 & ~(7 << (4*unit))));
135         pci_write_config_byte(dev, (0x44|hwif->channel), tmp2);
136         local_irq_restore(flags);
137 }
138
139 static void aec_set_pio_mode(ide_drive_t *drive, const u8 pio)
140 {
141         drive->hwif->set_dma_mode(drive, pio + XFER_PIO_0);
142 }
143
144 static int aec62xx_config_drive_xfer_rate (ide_drive_t *drive)
145 {
146         if (ide_tune_dma(drive))
147                 return 0;
148
149         if (ide_use_fast_pio(drive))
150                 ide_set_max_pio(drive);
151
152         return -1;
153 }
154
155 static void aec62xx_dma_lost_irq (ide_drive_t *drive)
156 {
157         switch (HWIF(drive)->pci_dev->device) {
158                 case PCI_DEVICE_ID_ARTOP_ATP860:
159                 case PCI_DEVICE_ID_ARTOP_ATP860R:
160                 case PCI_DEVICE_ID_ARTOP_ATP865:
161                 case PCI_DEVICE_ID_ARTOP_ATP865R:
162                         printk(" AEC62XX time out ");
163                 default:
164                         break;
165         }
166 }
167
168 static unsigned int __devinit init_chipset_aec62xx(struct pci_dev *dev, const char *name)
169 {
170         int bus_speed = system_bus_clock();
171
172         if (bus_speed <= 33)
173                 pci_set_drvdata(dev, (void *) aec6xxx_33_base);
174         else
175                 pci_set_drvdata(dev, (void *) aec6xxx_34_base);
176
177         /* These are necessary to get AEC6280 Macintosh cards to work */
178         if ((dev->device == PCI_DEVICE_ID_ARTOP_ATP865) ||
179             (dev->device == PCI_DEVICE_ID_ARTOP_ATP865R)) {
180                 u8 reg49h = 0, reg4ah = 0;
181                 /* Clear reset and test bits.  */
182                 pci_read_config_byte(dev, 0x49, &reg49h);
183                 pci_write_config_byte(dev, 0x49, reg49h & ~0x30);
184                 /* Enable chip interrupt output.  */
185                 pci_read_config_byte(dev, 0x4a, &reg4ah);
186                 pci_write_config_byte(dev, 0x4a, reg4ah & ~0x01);
187                 /* Enable burst mode. */
188                 pci_read_config_byte(dev, 0x4a, &reg4ah);
189                 pci_write_config_byte(dev, 0x4a, reg4ah | 0x80);
190         }
191
192         return dev->irq;
193 }
194
195 static void __devinit init_hwif_aec62xx(ide_hwif_t *hwif)
196 {
197         struct pci_dev *dev     = hwif->pci_dev;
198         u8 reg54 = 0,  mask     = hwif->channel ? 0xf0 : 0x0f;
199         unsigned long flags;
200
201         hwif->set_pio_mode = &aec_set_pio_mode;
202
203         if (dev->device == PCI_DEVICE_ID_ARTOP_ATP850UF) {
204                 if(hwif->mate)
205                         hwif->mate->serialized = hwif->serialized = 1;
206                 hwif->set_dma_mode = &aec6210_set_mode;
207         } else
208                 hwif->set_dma_mode = &aec6260_set_mode;
209
210         if (!hwif->dma_base) {
211                 hwif->drives[0].autotune = hwif->drives[1].autotune = 1;
212                 return;
213         }
214
215         hwif->ultra_mask = hwif->cds->udma_mask;
216         hwif->mwdma_mask = 0x07;
217
218         hwif->ide_dma_check     = &aec62xx_config_drive_xfer_rate;
219         hwif->dma_lost_irq      = &aec62xx_dma_lost_irq;
220
221         if (dev->device == PCI_DEVICE_ID_ARTOP_ATP850UF) {
222                 spin_lock_irqsave(&ide_lock, flags);
223                 pci_read_config_byte (dev, 0x54, &reg54);
224                 pci_write_config_byte(dev, 0x54, (reg54 & ~mask));
225                 spin_unlock_irqrestore(&ide_lock, flags);
226         } else if (hwif->cbl != ATA_CBL_PATA40_SHORT) {
227                 u8 ata66 = 0, mask = hwif->channel ? 0x02 : 0x01;
228
229                 pci_read_config_byte(hwif->pci_dev, 0x49, &ata66);
230
231                 hwif->cbl = (ata66 & mask) ? ATA_CBL_PATA40 : ATA_CBL_PATA80;
232         }
233
234         if (!noautodma)
235                 hwif->autodma = 1;
236         hwif->drives[0].autodma = hwif->drives[1].autodma = hwif->autodma;
237 }
238
239 static int __devinit init_setup_aec62xx(struct pci_dev *dev, ide_pci_device_t *d)
240 {
241         return ide_setup_pci_device(dev, d);
242 }
243
244 static int __devinit init_setup_aec6x80(struct pci_dev *dev, ide_pci_device_t *d)
245 {
246         unsigned long dma_base = pci_resource_start(dev, 4);
247
248         if (inb(dma_base + 2) & 0x10) {
249                 d->name = (dev->device == PCI_DEVICE_ID_ARTOP_ATP865R) ?
250                           "AEC6880R" : "AEC6880";
251                 d->udma_mask = 0x7f; /* udma0-6 */
252         }
253
254         return ide_setup_pci_device(dev, d);
255 }
256
257 static ide_pci_device_t aec62xx_chipsets[] __devinitdata = {
258         {       /* 0 */
259                 .name           = "AEC6210",
260                 .init_setup     = init_setup_aec62xx,
261                 .init_chipset   = init_chipset_aec62xx,
262                 .init_hwif      = init_hwif_aec62xx,
263                 .autodma        = AUTODMA,
264                 .enablebits     = {{0x4a,0x02,0x02}, {0x4a,0x04,0x04}},
265                 .bootable       = OFF_BOARD,
266                 .pio_mask       = ATA_PIO4,
267                 .udma_mask      = 0x07, /* udma0-2 */
268         },{     /* 1 */
269                 .name           = "AEC6260",
270                 .init_setup     = init_setup_aec62xx,
271                 .init_chipset   = init_chipset_aec62xx,
272                 .init_hwif      = init_hwif_aec62xx,
273                 .autodma        = NOAUTODMA,
274                 .bootable       = OFF_BOARD,
275                 .pio_mask       = ATA_PIO4,
276                 .udma_mask      = 0x1f, /* udma0-4 */
277         },{     /* 2 */
278                 .name           = "AEC6260R",
279                 .init_setup     = init_setup_aec62xx,
280                 .init_chipset   = init_chipset_aec62xx,
281                 .init_hwif      = init_hwif_aec62xx,
282                 .autodma        = AUTODMA,
283                 .enablebits     = {{0x4a,0x02,0x02}, {0x4a,0x04,0x04}},
284                 .bootable       = NEVER_BOARD,
285                 .pio_mask       = ATA_PIO4,
286                 .udma_mask      = 0x1f, /* udma0-4 */
287         },{     /* 3 */
288                 .name           = "AEC6280",
289                 .init_setup     = init_setup_aec6x80,
290                 .init_chipset   = init_chipset_aec62xx,
291                 .init_hwif      = init_hwif_aec62xx,
292                 .autodma        = AUTODMA,
293                 .bootable       = OFF_BOARD,
294                 .pio_mask       = ATA_PIO4,
295                 .udma_mask      = 0x3f, /* udma0-5 */
296         },{     /* 4 */
297                 .name           = "AEC6280R",
298                 .init_setup     = init_setup_aec6x80,
299                 .init_chipset   = init_chipset_aec62xx,
300                 .init_hwif      = init_hwif_aec62xx,
301                 .autodma        = AUTODMA,
302                 .enablebits     = {{0x4a,0x02,0x02}, {0x4a,0x04,0x04}},
303                 .bootable       = OFF_BOARD,
304                 .pio_mask       = ATA_PIO4,
305                 .udma_mask      = 0x3f, /* udma0-5 */
306         }
307 };
308
309 /**
310  *      aec62xx_init_one        -       called when a AEC is found
311  *      @dev: the aec62xx device
312  *      @id: the matching pci id
313  *
314  *      Called when the PCI registration layer (or the IDE initialization)
315  *      finds a device matching our IDE device tables.
316  *
317  *      NOTE: since we're going to modify the 'name' field for AEC-6[26]80[R]
318  *      chips, pass a local copy of 'struct pci_device_id' down the call chain.
319  */
320  
321 static int __devinit aec62xx_init_one(struct pci_dev *dev, const struct pci_device_id *id)
322 {
323         ide_pci_device_t d = aec62xx_chipsets[id->driver_data];
324
325         return d.init_setup(dev, &d);
326 }
327
328 static struct pci_device_id aec62xx_pci_tbl[] = {
329         { PCI_VENDOR_ID_ARTOP, PCI_DEVICE_ID_ARTOP_ATP850UF, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 },
330         { PCI_VENDOR_ID_ARTOP, PCI_DEVICE_ID_ARTOP_ATP860,   PCI_ANY_ID, PCI_ANY_ID, 0, 0, 1 },
331         { PCI_VENDOR_ID_ARTOP, PCI_DEVICE_ID_ARTOP_ATP860R,  PCI_ANY_ID, PCI_ANY_ID, 0, 0, 2 },
332         { PCI_VENDOR_ID_ARTOP, PCI_DEVICE_ID_ARTOP_ATP865,   PCI_ANY_ID, PCI_ANY_ID, 0, 0, 3 },
333         { PCI_VENDOR_ID_ARTOP, PCI_DEVICE_ID_ARTOP_ATP865R,  PCI_ANY_ID, PCI_ANY_ID, 0, 0, 4 },
334         { 0, },
335 };
336 MODULE_DEVICE_TABLE(pci, aec62xx_pci_tbl);
337
338 static struct pci_driver driver = {
339         .name           = "AEC62xx_IDE",
340         .id_table       = aec62xx_pci_tbl,
341         .probe          = aec62xx_init_one,
342 };
343
344 static int __init aec62xx_ide_init(void)
345 {
346         return ide_pci_register_driver(&driver);
347 }
348
349 module_init(aec62xx_ide_init);
350
351 MODULE_AUTHOR("Andre Hedrick");
352 MODULE_DESCRIPTION("PCI driver module for ARTOP AEC62xx IDE");
353 MODULE_LICENSE("GPL");