pid namespaces: introduce struct upid
[linux-2.6] / include / acpi / acmacros.h
1 /******************************************************************************
2  *
3  * Name: acmacros.h - C macros for the entire subsystem.
4  *
5  *****************************************************************************/
6
7 /*
8  * Copyright (C) 2000 - 2007, R. Byron Moore
9  * All rights reserved.
10  *
11  * Redistribution and use in source and binary forms, with or without
12  * modification, are permitted provided that the following conditions
13  * are met:
14  * 1. Redistributions of source code must retain the above copyright
15  *    notice, this list of conditions, and the following disclaimer,
16  *    without modification.
17  * 2. Redistributions in binary form must reproduce at minimum a disclaimer
18  *    substantially similar to the "NO WARRANTY" disclaimer below
19  *    ("Disclaimer") and any redistribution must be conditioned upon
20  *    including a substantially similar Disclaimer requirement for further
21  *    binary redistribution.
22  * 3. Neither the names of the above-listed copyright holders nor the names
23  *    of any contributors may be used to endorse or promote products derived
24  *    from this software without specific prior written permission.
25  *
26  * Alternatively, this software may be distributed under the terms of the
27  * GNU General Public License ("GPL") version 2 as published by the Free
28  * Software Foundation.
29  *
30  * NO WARRANTY
31  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
32  * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
33  * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
34  * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
35  * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
36  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
37  * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
38  * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
39  * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
40  * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
41  * POSSIBILITY OF SUCH DAMAGES.
42  */
43
44 #ifndef __ACMACROS_H__
45 #define __ACMACROS_H__
46
47 /*
48  * Data manipulation macros
49  */
50 #define ACPI_LOWORD(l)                  ((u16)(u32)(l))
51 #define ACPI_HIWORD(l)                  ((u16)((((u32)(l)) >> 16) & 0xFFFF))
52 #define ACPI_LOBYTE(l)                  ((u8)(u16)(l))
53 #define ACPI_HIBYTE(l)                  ((u8)((((u16)(l)) >> 8) & 0xFF))
54
55 #define ACPI_SET_BIT(target,bit)        ((target) |= (bit))
56 #define ACPI_CLEAR_BIT(target,bit)      ((target) &= ~(bit))
57 #define ACPI_MIN(a,b)                   (((a)<(b))?(a):(b))
58 #define ACPI_MAX(a,b)                   (((a)>(b))?(a):(b))
59
60 /* Size calculation */
61
62 #define ACPI_ARRAY_LENGTH(x)            (sizeof(x) / sizeof((x)[0]))
63
64 #ifdef ACPI_NO_INTEGER64_SUPPORT
65 /*
66  * acpi_integer is 32-bits, no 64-bit support on this platform
67  */
68 #define ACPI_LODWORD(l)                 ((u32)(l))
69 #define ACPI_HIDWORD(l)                 ((u32)(0))
70
71 #else
72
73 /*
74  * Full 64-bit address/integer on both 32-bit and 64-bit platforms
75  */
76 #define ACPI_LODWORD(l)                 ((u32)(u64)(l))
77 #define ACPI_HIDWORD(l)                 ((u32)(((*(struct uint64_struct *)(void *)(&l))).hi))
78 #endif
79
80 /*
81  * printf() format helpers
82  */
83
84 /* Split 64-bit integer into two 32-bit values. Use with %8.8_x%8.8_x */
85
86 #define ACPI_FORMAT_UINT64(i)           ACPI_HIDWORD(i),ACPI_LODWORD(i)
87
88 /*
89  * Extract data using a pointer.  Any more than a byte and we
90  * get into potential aligment issues -- see the STORE macros below.
91  * Use with care.
92  */
93 #define ACPI_GET8(ptr)                  *ACPI_CAST_PTR (u8, ptr)
94 #define ACPI_GET16(ptr)                 *ACPI_CAST_PTR (u16, ptr)
95 #define ACPI_GET32(ptr)                 *ACPI_CAST_PTR (u32, ptr)
96 #define ACPI_GET64(ptr)                 *ACPI_CAST_PTR (u64, ptr)
97 #define ACPI_SET8(ptr)                  *ACPI_CAST_PTR (u8, ptr)
98 #define ACPI_SET16(ptr)                 *ACPI_CAST_PTR (u16, ptr)
99 #define ACPI_SET32(ptr)                 *ACPI_CAST_PTR (u32, ptr)
100 #define ACPI_SET64(ptr)                 *ACPI_CAST_PTR (u64, ptr)
101
102 /*
103  * Pointer manipulation
104  */
105 #define ACPI_CAST_PTR(t, p)             ((t *) (acpi_uintptr_t) (p))
106 #define ACPI_CAST_INDIRECT_PTR(t, p)    ((t **) (acpi_uintptr_t) (p))
107 #define ACPI_ADD_PTR(t,a,b)             ACPI_CAST_PTR (t, (ACPI_CAST_PTR (u8,(a)) + (acpi_native_uint)(b)))
108 #define ACPI_PTR_DIFF(a,b)              (acpi_native_uint) (ACPI_CAST_PTR (u8,(a)) - ACPI_CAST_PTR (u8,(b)))
109
110 /* Pointer/Integer type conversions */
111
112 #define ACPI_TO_POINTER(i)              ACPI_ADD_PTR (void,(void *) NULL,(acpi_native_uint) i)
113 #define ACPI_TO_INTEGER(p)              ACPI_PTR_DIFF (p,(void *) NULL)
114 #define ACPI_OFFSET(d,f)                (acpi_size) ACPI_PTR_DIFF (&(((d *)0)->f),(void *) NULL)
115 #define ACPI_PHYSADDR_TO_PTR(i)         ACPI_TO_POINTER(i)
116 #define ACPI_PTR_TO_PHYSADDR(i)         ACPI_TO_INTEGER(i)
117
118 #ifndef ACPI_MISALIGNMENT_NOT_SUPPORTED
119 #define ACPI_COMPARE_NAME(a,b)          (*ACPI_CAST_PTR (u32,(a)) == *ACPI_CAST_PTR (u32,(b)))
120 #else
121 #define ACPI_COMPARE_NAME(a,b)          (!ACPI_STRNCMP (ACPI_CAST_PTR (char,(a)), ACPI_CAST_PTR (char,(b)), ACPI_NAME_SIZE))
122 #endif
123
124 /*
125  * Macros for moving data around to/from buffers that are possibly unaligned.
126  * If the hardware supports the transfer of unaligned data, just do the store.
127  * Otherwise, we have to move one byte at a time.
128  */
129 #ifdef ACPI_BIG_ENDIAN
130 /*
131  * Macros for big-endian machines
132  */
133
134 /* This macro sets a buffer index, starting from the end of the buffer */
135
136 #define ACPI_BUFFER_INDEX(buf_len,buf_offset,byte_gran) ((buf_len) - (((buf_offset)+1) * (byte_gran)))
137
138 /* These macros reverse the bytes during the move, converting little-endian to big endian */
139
140          /* Big Endian      <==        Little Endian */
141          /*  Hi...Lo                     Lo...Hi     */
142 /* 16-bit source, 16/32/64 destination */
143
144 #define ACPI_MOVE_16_TO_16(d,s)         {((  u8 *)(void *)(d))[0] = ((u8 *)(void *)(s))[1];\
145                           ((  u8 *)(void *)(d))[1] = ((u8 *)(void *)(s))[0];}
146
147 #define ACPI_MOVE_16_TO_32(d,s)         {(*(u32 *)(void *)(d))=0;\
148                                           ((u8 *)(void *)(d))[2] = ((u8 *)(void *)(s))[1];\
149                                           ((u8 *)(void *)(d))[3] = ((u8 *)(void *)(s))[0];}
150
151 #define ACPI_MOVE_16_TO_64(d,s)         {(*(u64 *)(void *)(d))=0;\
152                                                            ((u8 *)(void *)(d))[6] = ((u8 *)(void *)(s))[1];\
153                                                            ((u8 *)(void *)(d))[7] = ((u8 *)(void *)(s))[0];}
154
155 /* 32-bit source, 16/32/64 destination */
156
157 #define ACPI_MOVE_32_TO_16(d,s)         ACPI_MOVE_16_TO_16(d,s) /* Truncate to 16 */
158
159 #define ACPI_MOVE_32_TO_32(d,s)         {((  u8 *)(void *)(d))[0] = ((u8 *)(void *)(s))[3];\
160                                                                           ((  u8 *)(void *)(d))[1] = ((u8 *)(void *)(s))[2];\
161                                                                           ((  u8 *)(void *)(d))[2] = ((u8 *)(void *)(s))[1];\
162                                                                           ((  u8 *)(void *)(d))[3] = ((u8 *)(void *)(s))[0];}
163
164 #define ACPI_MOVE_32_TO_64(d,s)         {(*(u64 *)(void *)(d))=0;\
165                                                                                    ((u8 *)(void *)(d))[4] = ((u8 *)(void *)(s))[3];\
166                                                                                    ((u8 *)(void *)(d))[5] = ((u8 *)(void *)(s))[2];\
167                                                                                    ((u8 *)(void *)(d))[6] = ((u8 *)(void *)(s))[1];\
168                                                                                    ((u8 *)(void *)(d))[7] = ((u8 *)(void *)(s))[0];}
169
170 /* 64-bit source, 16/32/64 destination */
171
172 #define ACPI_MOVE_64_TO_16(d,s)         ACPI_MOVE_16_TO_16(d,s) /* Truncate to 16 */
173
174 #define ACPI_MOVE_64_TO_32(d,s)         ACPI_MOVE_32_TO_32(d,s) /* Truncate to 32 */
175
176 #define ACPI_MOVE_64_TO_64(d,s)         {((  u8 *)(void *)(d))[0] = ((u8 *)(void *)(s))[7];\
177                                                                                  ((  u8 *)(void *)(d))[1] = ((u8 *)(void *)(s))[6];\
178                                                                                  ((  u8 *)(void *)(d))[2] = ((u8 *)(void *)(s))[5];\
179                                                                                  ((  u8 *)(void *)(d))[3] = ((u8 *)(void *)(s))[4];\
180                                                                                  ((  u8 *)(void *)(d))[4] = ((u8 *)(void *)(s))[3];\
181                                                                                  ((  u8 *)(void *)(d))[5] = ((u8 *)(void *)(s))[2];\
182                                                                                  ((  u8 *)(void *)(d))[6] = ((u8 *)(void *)(s))[1];\
183                                                                                  ((  u8 *)(void *)(d))[7] = ((u8 *)(void *)(s))[0];}
184 #else
185 /*
186  * Macros for little-endian machines
187  */
188
189 /* This macro sets a buffer index, starting from the beginning of the buffer */
190
191 #define ACPI_BUFFER_INDEX(buf_len,buf_offset,byte_gran) (buf_offset)
192
193 #ifndef ACPI_MISALIGNMENT_NOT_SUPPORTED
194
195 /* The hardware supports unaligned transfers, just do the little-endian move */
196
197 /* 16-bit source, 16/32/64 destination */
198
199 #define ACPI_MOVE_16_TO_16(d,s)         *(u16 *)(void *)(d) = *(u16 *)(void *)(s)
200 #define ACPI_MOVE_16_TO_32(d,s)         *(u32 *)(void *)(d) = *(u16 *)(void *)(s)
201 #define ACPI_MOVE_16_TO_64(d,s)         *(u64 *)(void *)(d) = *(u16 *)(void *)(s)
202
203 /* 32-bit source, 16/32/64 destination */
204
205 #define ACPI_MOVE_32_TO_16(d,s)         ACPI_MOVE_16_TO_16(d,s) /* Truncate to 16 */
206 #define ACPI_MOVE_32_TO_32(d,s)         *(u32 *)(void *)(d) = *(u32 *)(void *)(s)
207 #define ACPI_MOVE_32_TO_64(d,s)         *(u64 *)(void *)(d) = *(u32 *)(void *)(s)
208
209 /* 64-bit source, 16/32/64 destination */
210
211 #define ACPI_MOVE_64_TO_16(d,s)         ACPI_MOVE_16_TO_16(d,s) /* Truncate to 16 */
212 #define ACPI_MOVE_64_TO_32(d,s)         ACPI_MOVE_32_TO_32(d,s) /* Truncate to 32 */
213 #define ACPI_MOVE_64_TO_64(d,s)         *(u64 *)(void *)(d) = *(u64 *)(void *)(s)
214
215 #else
216 /*
217  * The hardware does not support unaligned transfers.  We must move the
218  * data one byte at a time.  These macros work whether the source or
219  * the destination (or both) is/are unaligned.  (Little-endian move)
220  */
221
222 /* 16-bit source, 16/32/64 destination */
223
224 #define ACPI_MOVE_16_TO_16(d,s)         {((  u8 *)(void *)(d))[0] = ((u8 *)(void *)(s))[0];\
225                                                                                  ((  u8 *)(void *)(d))[1] = ((u8 *)(void *)(s))[1];}
226
227 #define ACPI_MOVE_16_TO_32(d,s)         {(*(u32 *)(void *)(d)) = 0; ACPI_MOVE_16_TO_16(d,s);}
228 #define ACPI_MOVE_16_TO_64(d,s)         {(*(u64 *)(void *)(d)) = 0; ACPI_MOVE_16_TO_16(d,s);}
229
230 /* 32-bit source, 16/32/64 destination */
231
232 #define ACPI_MOVE_32_TO_16(d,s)         ACPI_MOVE_16_TO_16(d,s) /* Truncate to 16 */
233
234 #define ACPI_MOVE_32_TO_32(d,s)         {((  u8 *)(void *)(d))[0] = ((u8 *)(void *)(s))[0];\
235                                                                                  ((  u8 *)(void *)(d))[1] = ((u8 *)(void *)(s))[1];\
236                                                                                  ((  u8 *)(void *)(d))[2] = ((u8 *)(void *)(s))[2];\
237                                                                                  ((  u8 *)(void *)(d))[3] = ((u8 *)(void *)(s))[3];}
238
239 #define ACPI_MOVE_32_TO_64(d,s)         {(*(u64 *)(void *)(d)) = 0; ACPI_MOVE_32_TO_32(d,s);}
240
241 /* 64-bit source, 16/32/64 destination */
242
243 #define ACPI_MOVE_64_TO_16(d,s)         ACPI_MOVE_16_TO_16(d,s) /* Truncate to 16 */
244 #define ACPI_MOVE_64_TO_32(d,s)         ACPI_MOVE_32_TO_32(d,s) /* Truncate to 32 */
245 #define ACPI_MOVE_64_TO_64(d,s)         {((  u8 *)(void *)(d))[0] = ((u8 *)(void *)(s))[0];\
246                                                                                  ((  u8 *)(void *)(d))[1] = ((u8 *)(void *)(s))[1];\
247                                                                                  ((  u8 *)(void *)(d))[2] = ((u8 *)(void *)(s))[2];\
248                                                                                  ((  u8 *)(void *)(d))[3] = ((u8 *)(void *)(s))[3];\
249                                                                                  ((  u8 *)(void *)(d))[4] = ((u8 *)(void *)(s))[4];\
250                                                                                  ((  u8 *)(void *)(d))[5] = ((u8 *)(void *)(s))[5];\
251                                                                                  ((  u8 *)(void *)(d))[6] = ((u8 *)(void *)(s))[6];\
252                                                                                  ((  u8 *)(void *)(d))[7] = ((u8 *)(void *)(s))[7];}
253 #endif
254 #endif
255
256 /* Macros based on machine integer width */
257
258 #if ACPI_MACHINE_WIDTH == 32
259 #define ACPI_MOVE_SIZE_TO_16(d,s)       ACPI_MOVE_32_TO_16(d,s)
260
261 #elif ACPI_MACHINE_WIDTH == 64
262 #define ACPI_MOVE_SIZE_TO_16(d,s)       ACPI_MOVE_64_TO_16(d,s)
263
264 #else
265 #error unknown ACPI_MACHINE_WIDTH
266 #endif
267
268 /*
269  * Fast power-of-two math macros for non-optimized compilers
270  */
271 #define _ACPI_DIV(value,power_of2)      ((u32) ((value) >> (power_of2)))
272 #define _ACPI_MUL(value,power_of2)      ((u32) ((value) << (power_of2)))
273 #define _ACPI_MOD(value,divisor)        ((u32) ((value) & ((divisor) -1)))
274
275 #define ACPI_DIV_2(a)                   _ACPI_DIV(a,1)
276 #define ACPI_MUL_2(a)                   _ACPI_MUL(a,1)
277 #define ACPI_MOD_2(a)                   _ACPI_MOD(a,2)
278
279 #define ACPI_DIV_4(a)                   _ACPI_DIV(a,2)
280 #define ACPI_MUL_4(a)                   _ACPI_MUL(a,2)
281 #define ACPI_MOD_4(a)                   _ACPI_MOD(a,4)
282
283 #define ACPI_DIV_8(a)                   _ACPI_DIV(a,3)
284 #define ACPI_MUL_8(a)                   _ACPI_MUL(a,3)
285 #define ACPI_MOD_8(a)                   _ACPI_MOD(a,8)
286
287 #define ACPI_DIV_16(a)                  _ACPI_DIV(a,4)
288 #define ACPI_MUL_16(a)                  _ACPI_MUL(a,4)
289 #define ACPI_MOD_16(a)                  _ACPI_MOD(a,16)
290
291 #define ACPI_DIV_32(a)                  _ACPI_DIV(a,5)
292 #define ACPI_MUL_32(a)                  _ACPI_MUL(a,5)
293 #define ACPI_MOD_32(a)                  _ACPI_MOD(a,32)
294
295 /*
296  * Rounding macros (Power of two boundaries only)
297  */
298 #define ACPI_ROUND_DOWN(value,boundary)     (((acpi_native_uint)(value)) & \
299                                                                                                 (~(((acpi_native_uint) boundary)-1)))
300
301 #define ACPI_ROUND_UP(value,boundary)       ((((acpi_native_uint)(value)) + \
302                                                                                                 (((acpi_native_uint) boundary)-1)) & \
303                                                                                                 (~(((acpi_native_uint) boundary)-1)))
304
305 /* Note: sizeof(acpi_native_uint) evaluates to either 2, 4, or 8 */
306
307 #define ACPI_ROUND_DOWN_TO_32BIT(a)         ACPI_ROUND_DOWN(a,4)
308 #define ACPI_ROUND_DOWN_TO_64BIT(a)         ACPI_ROUND_DOWN(a,8)
309 #define ACPI_ROUND_DOWN_TO_NATIVE_WORD(a)   ACPI_ROUND_DOWN(a,sizeof(acpi_native_uint))
310
311 #define ACPI_ROUND_UP_TO_32BIT(a)           ACPI_ROUND_UP(a,4)
312 #define ACPI_ROUND_UP_TO_64BIT(a)           ACPI_ROUND_UP(a,8)
313 #define ACPI_ROUND_UP_TO_NATIVE_WORD(a)     ACPI_ROUND_UP(a,sizeof(acpi_native_uint))
314
315 #define ACPI_ROUND_BITS_UP_TO_BYTES(a)      ACPI_DIV_8((a) + 7)
316 #define ACPI_ROUND_BITS_DOWN_TO_BYTES(a)    ACPI_DIV_8((a))
317
318 #define ACPI_ROUND_UP_TO_1K(a)              (((a) + 1023) >> 10)
319
320 /* Generic (non-power-of-two) rounding */
321
322 #define ACPI_ROUND_UP_TO(value,boundary)    (((value) + ((boundary)-1)) / (boundary))
323
324 #define ACPI_IS_MISALIGNED(value)           (((acpi_native_uint)value) & (sizeof(acpi_native_uint)-1))
325
326 /*
327  * Bitmask creation
328  * Bit positions start at zero.
329  * MASK_BITS_ABOVE creates a mask starting AT the position and above
330  * MASK_BITS_BELOW creates a mask starting one bit BELOW the position
331  */
332 #define ACPI_MASK_BITS_ABOVE(position)      (~((ACPI_INTEGER_MAX) << ((u32) (position))))
333 #define ACPI_MASK_BITS_BELOW(position)      ((ACPI_INTEGER_MAX) << ((u32) (position)))
334
335 #define ACPI_IS_OCTAL_DIGIT(d)              (((char)(d) >= '0') && ((char)(d) <= '7'))
336
337 /* Bitfields within ACPI registers */
338
339 #define ACPI_REGISTER_PREPARE_BITS(val, pos, mask)      ((val << pos) & mask)
340 #define ACPI_REGISTER_INSERT_VALUE(reg, pos, mask, val)  reg = (reg & (~(mask))) | ACPI_REGISTER_PREPARE_BITS(val, pos, mask)
341
342 #define ACPI_INSERT_BITS(target, mask, source)          target = ((target & (~(mask))) | (source & mask))
343
344 /* Generate a UUID */
345
346 #define ACPI_INIT_UUID(a,b,c,d0,d1,d2,d3,d4,d5,d6,d7) \
347         (a) & 0xFF, ((a) >> 8) & 0xFF, ((a) >> 16) & 0xFF, ((a) >> 24) & 0xFF, \
348         (b) & 0xFF, ((b) >> 8) & 0xFF, \
349         (c) & 0xFF, ((c) >> 8) & 0xFF, \
350         (d0), (d1), (d2), (d3), (d4), (d5), (d6), (d7)
351
352 /*
353  * An struct acpi_namespace_node * can appear in some contexts,
354  * where a pointer to an union acpi_operand_object    can also
355  * appear.  This macro is used to distinguish them.
356  *
357  * The "Descriptor" field is the first field in both structures.
358  */
359 #define ACPI_GET_DESCRIPTOR_TYPE(d)     (((union acpi_descriptor *)(void *)(d))->common.descriptor_type)
360 #define ACPI_SET_DESCRIPTOR_TYPE(d,t)   (((union acpi_descriptor *)(void *)(d))->common.descriptor_type = t)
361
362 /* Macro to test the object type */
363
364 #define ACPI_GET_OBJECT_TYPE(d)         (((union acpi_operand_object *)(void *)(d))->common.type)
365
366 /* Macro to check the table flags for SINGLE or MULTIPLE tables are allowed */
367
368 #define ACPI_IS_SINGLE_TABLE(x)         (((x) & 0x01) == ACPI_TABLE_SINGLE ? 1 : 0)
369
370 /*
371  * Macros for the master AML opcode table
372  */
373 #if defined(ACPI_DISASSEMBLER) || defined (ACPI_DEBUG_OUTPUT)
374 #define ACPI_OP(name,Pargs,Iargs,obj_type,class,type,flags)    {name,(u32)(Pargs),(u32)(Iargs),(u32)(flags),obj_type,class,type}
375 #else
376 #define ACPI_OP(name,Pargs,Iargs,obj_type,class,type,flags)    {(u32)(Pargs),(u32)(Iargs),(u32)(flags),obj_type,class,type}
377 #endif
378
379 #ifdef ACPI_DISASSEMBLER
380 #define ACPI_DISASM_ONLY_MEMBERS(a)     a;
381 #else
382 #define ACPI_DISASM_ONLY_MEMBERS(a)
383 #endif
384
385 #define ARG_TYPE_WIDTH                  5
386 #define ARG_1(x)                        ((u32)(x))
387 #define ARG_2(x)                        ((u32)(x) << (1 * ARG_TYPE_WIDTH))
388 #define ARG_3(x)                        ((u32)(x) << (2 * ARG_TYPE_WIDTH))
389 #define ARG_4(x)                        ((u32)(x) << (3 * ARG_TYPE_WIDTH))
390 #define ARG_5(x)                        ((u32)(x) << (4 * ARG_TYPE_WIDTH))
391 #define ARG_6(x)                        ((u32)(x) << (5 * ARG_TYPE_WIDTH))
392
393 #define ARGI_LIST1(a)                   (ARG_1(a))
394 #define ARGI_LIST2(a,b)                 (ARG_1(b)|ARG_2(a))
395 #define ARGI_LIST3(a,b,c)               (ARG_1(c)|ARG_2(b)|ARG_3(a))
396 #define ARGI_LIST4(a,b,c,d)             (ARG_1(d)|ARG_2(c)|ARG_3(b)|ARG_4(a))
397 #define ARGI_LIST5(a,b,c,d,e)           (ARG_1(e)|ARG_2(d)|ARG_3(c)|ARG_4(b)|ARG_5(a))
398 #define ARGI_LIST6(a,b,c,d,e,f)         (ARG_1(f)|ARG_2(e)|ARG_3(d)|ARG_4(c)|ARG_5(b)|ARG_6(a))
399
400 #define ARGP_LIST1(a)                   (ARG_1(a))
401 #define ARGP_LIST2(a,b)                 (ARG_1(a)|ARG_2(b))
402 #define ARGP_LIST3(a,b,c)               (ARG_1(a)|ARG_2(b)|ARG_3(c))
403 #define ARGP_LIST4(a,b,c,d)             (ARG_1(a)|ARG_2(b)|ARG_3(c)|ARG_4(d))
404 #define ARGP_LIST5(a,b,c,d,e)           (ARG_1(a)|ARG_2(b)|ARG_3(c)|ARG_4(d)|ARG_5(e))
405 #define ARGP_LIST6(a,b,c,d,e,f)         (ARG_1(a)|ARG_2(b)|ARG_3(c)|ARG_4(d)|ARG_5(e)|ARG_6(f))
406
407 #define GET_CURRENT_ARG_TYPE(list)      (list & ((u32) 0x1F))
408 #define INCREMENT_ARG_LIST(list)        (list >>= ((u32) ARG_TYPE_WIDTH))
409
410 #if defined (ACPI_DEBUG_OUTPUT) || !defined (ACPI_NO_ERROR_MESSAGES)
411 /*
412  * Module name is include in both debug and non-debug versions primarily for
413  * error messages. The __FILE__ macro is not very useful for this, because it
414  * often includes the entire pathname to the module
415  */
416 #define ACPI_MODULE_NAME(name)          static char ACPI_UNUSED_VAR *_acpi_module_name = name;
417 #else
418 #define ACPI_MODULE_NAME(name)
419 #endif
420
421 /*
422  * Ascii error messages can be configured out
423  */
424 #ifndef ACPI_NO_ERROR_MESSAGES
425 #define AE_INFO                         _acpi_module_name, __LINE__
426
427 /*
428  * Error reporting. Callers module and line number are inserted by AE_INFO,
429  * the plist contains a set of parens to allow variable-length lists.
430  * These macros are used for both the debug and non-debug versions of the code.
431  */
432 #define ACPI_INFO(plist)                acpi_ut_info plist
433 #define ACPI_WARNING(plist)             acpi_ut_warning plist
434 #define ACPI_EXCEPTION(plist)           acpi_ut_exception plist
435 #define ACPI_ERROR(plist)               acpi_ut_error plist
436 #define ACPI_ERROR_NAMESPACE(s,e)       acpi_ns_report_error (AE_INFO, s, e);
437 #define ACPI_ERROR_METHOD(s,n,p,e)      acpi_ns_report_method_error (AE_INFO, s, n, p, e);
438
439 #else
440
441 /* No error messages */
442
443 #define ACPI_INFO(plist)
444 #define ACPI_WARNING(plist)
445 #define ACPI_EXCEPTION(plist)
446 #define ACPI_ERROR(plist)
447 #define ACPI_ERROR_NAMESPACE(s,e)
448 #define ACPI_ERROR_METHOD(s,n,p,e)
449 #endif
450
451 /*
452  * Debug macros that are conditionally compiled
453  */
454 #ifdef ACPI_DEBUG_OUTPUT
455
456 /*
457  * Common parameters used for debug output functions:
458  * line number, function name, module(file) name, component ID
459  */
460 #define ACPI_DEBUG_PARAMETERS           __LINE__, ACPI_GET_FUNCTION_NAME, _acpi_module_name, _COMPONENT
461
462 /*
463  * Function entry tracing
464  */
465
466 /*
467  * If ACPI_GET_FUNCTION_NAME was not defined in the compiler-dependent header,
468  * define it now. This is the case where there the compiler does not support
469  * a __FUNCTION__ macro or equivalent. We save the function name on the
470  * local stack.
471  */
472 #ifndef ACPI_GET_FUNCTION_NAME
473 #define ACPI_GET_FUNCTION_NAME          _acpi_function_name
474 /*
475  * The Name parameter should be the procedure name as a quoted string.
476  * This is declared as a local string ("MyFunctionName") so that it can
477  * be also used by the function exit macros below.
478  * Note: (const char) is used to be compatible with the debug interfaces
479  * and macros such as __FUNCTION__.
480  */
481 #define ACPI_FUNCTION_NAME(name)        const char *_acpi_function_name = #name;
482
483 #else
484 /* Compiler supports __FUNCTION__ (or equivalent) -- Ignore this macro */
485
486 #define ACPI_FUNCTION_NAME(name)
487 #endif
488
489 #ifdef DEBUG_FUNC_TRACE
490
491 #define ACPI_FUNCTION_TRACE(a)          ACPI_FUNCTION_NAME(a) \
492                           acpi_ut_trace(ACPI_DEBUG_PARAMETERS)
493 #define ACPI_FUNCTION_TRACE_PTR(a,b)    ACPI_FUNCTION_NAME(a) \
494                                            acpi_ut_trace_ptr(ACPI_DEBUG_PARAMETERS,(void *)b)
495 #define ACPI_FUNCTION_TRACE_U32(a,b)    ACPI_FUNCTION_NAME(a) \
496                                                          acpi_ut_trace_u32(ACPI_DEBUG_PARAMETERS,(u32)b)
497 #define ACPI_FUNCTION_TRACE_STR(a,b)    ACPI_FUNCTION_NAME(a) \
498                                                                           acpi_ut_trace_str(ACPI_DEBUG_PARAMETERS,(char *)b)
499
500 #define ACPI_FUNCTION_ENTRY()           acpi_ut_track_stack_ptr()
501
502 /*
503  * Function exit tracing.
504  * WARNING: These macros include a return statement.  This is usually considered
505  * bad form, but having a separate exit macro is very ugly and difficult to maintain.
506  * One of the FUNCTION_TRACE macros above must be used in conjunction with these macros
507  * so that "_AcpiFunctionName" is defined.
508  *
509  * Note: the DO_WHILE0 macro is used to prevent some compilers from complaining
510  * about these constructs.
511  */
512 #ifdef ACPI_USE_DO_WHILE_0
513 #define ACPI_DO_WHILE0(a)               do a while(0)
514 #else
515 #define ACPI_DO_WHILE0(a)               a
516 #endif
517
518 #define return_VOID                     ACPI_DO_WHILE0 ({ \
519                                                                                         acpi_ut_exit (ACPI_DEBUG_PARAMETERS); \
520                                                                                         return;})
521 /*
522  * There are two versions of most of the return macros. The default version is
523  * safer, since it avoids side-effects by guaranteeing that the argument will
524  * not be evaluated twice.
525  *
526  * A less-safe version of the macros is provided for optional use if the
527  * compiler uses excessive CPU stack (for example, this may happen in the
528  * debug case if code optimzation is disabled.)
529  */
530 #ifndef ACPI_SIMPLE_RETURN_MACROS
531
532 #define return_ACPI_STATUS(s)           ACPI_DO_WHILE0 ({ \
533                                                                                         register acpi_status _s = (s); \
534                                                                                         acpi_ut_status_exit (ACPI_DEBUG_PARAMETERS, _s); \
535                                                                                         return (_s); })
536 #define return_PTR(s)                   ACPI_DO_WHILE0 ({ \
537                                                                                         register void *_s = (void *) (s); \
538                                                                                         acpi_ut_ptr_exit (ACPI_DEBUG_PARAMETERS, (u8 *) _s); \
539                                                                                         return (_s); })
540 #define return_VALUE(s)                 ACPI_DO_WHILE0 ({ \
541                                                                                         register acpi_integer _s = (s); \
542                                                                                         acpi_ut_value_exit (ACPI_DEBUG_PARAMETERS, _s); \
543                                                                                         return (_s); })
544 #define return_UINT8(s)                 ACPI_DO_WHILE0 ({ \
545                                                                                         register u8 _s = (u8) (s); \
546                                                                                         acpi_ut_value_exit (ACPI_DEBUG_PARAMETERS, (acpi_integer) _s); \
547                                                                                         return (_s); })
548 #define return_UINT32(s)                ACPI_DO_WHILE0 ({ \
549                                                                                         register u32 _s = (u32) (s); \
550                                                                                         acpi_ut_value_exit (ACPI_DEBUG_PARAMETERS, (acpi_integer) _s); \
551                                                                                         return (_s); })
552 #else                           /* Use original less-safe macros */
553
554 #define return_ACPI_STATUS(s)           ACPI_DO_WHILE0 ({ \
555                                                                                         acpi_ut_status_exit (ACPI_DEBUG_PARAMETERS, (s)); \
556                                                                                         return((s)); })
557 #define return_PTR(s)                   ACPI_DO_WHILE0 ({ \
558                                                                                         acpi_ut_ptr_exit (ACPI_DEBUG_PARAMETERS, (u8 *) (s)); \
559                                                                                         return((s)); })
560 #define return_VALUE(s)                 ACPI_DO_WHILE0 ({ \
561                                                                                         acpi_ut_value_exit (ACPI_DEBUG_PARAMETERS, (acpi_integer) (s)); \
562                                                                                         return((s)); })
563 #define return_UINT8(s)                 return_VALUE(s)
564 #define return_UINT32(s)                return_VALUE(s)
565
566 #endif                          /* ACPI_SIMPLE_RETURN_MACROS */
567
568 #else /* !DEBUG_FUNC_TRACE */
569
570 #define ACPI_FUNCTION_TRACE(a)
571 #define ACPI_FUNCTION_TRACE_PTR(a,b)
572 #define ACPI_FUNCTION_TRACE_U32(a,b)
573 #define ACPI_FUNCTION_TRACE_STR(a,b)
574 #define ACPI_FUNCTION_EXIT
575 #define ACPI_FUNCTION_STATUS_EXIT(s)
576 #define ACPI_FUNCTION_VALUE_EXIT(s)
577 #define ACPI_FUNCTION_TRACE(a)
578 #define ACPI_FUNCTION_ENTRY()
579
580 #define return_VOID                     return
581 #define return_ACPI_STATUS(s)           return(s)
582 #define return_VALUE(s)                 return(s)
583 #define return_UINT8(s)                 return(s)
584 #define return_UINT32(s)                return(s)
585 #define return_PTR(s)                   return(s)
586
587 #endif /* DEBUG_FUNC_TRACE */
588
589 /* Conditional execution */
590
591 #define ACPI_DEBUG_EXEC(a)              a
592 #define ACPI_NORMAL_EXEC(a)
593
594 #define ACPI_DEBUG_DEFINE(a)            a;
595 #define ACPI_DEBUG_ONLY_MEMBERS(a)      a;
596 #define _VERBOSE_STRUCTURES
597
598 /* Stack and buffer dumping */
599
600 #define ACPI_DUMP_STACK_ENTRY(a)        acpi_ex_dump_operand((a),0)
601 #define ACPI_DUMP_OPERANDS(a,b,c,d,e)   acpi_ex_dump_operands(a,b,c,d,e,_acpi_module_name,__LINE__)
602
603 #define ACPI_DUMP_ENTRY(a,b)            acpi_ns_dump_entry (a,b)
604 #define ACPI_DUMP_PATHNAME(a,b,c,d)     acpi_ns_dump_pathname(a,b,c,d)
605 #define ACPI_DUMP_RESOURCE_LIST(a)      acpi_rs_dump_resource_list(a)
606 #define ACPI_DUMP_BUFFER(a,b)           acpi_ut_dump_buffer((u8 *)a,b,DB_BYTE_DISPLAY,_COMPONENT)
607
608 /*
609  * Master debug print macros
610  * Print iff:
611  *    1) Debug print for the current component is enabled
612  *    2) Debug error level or trace level for the print statement is enabled
613  */
614 #define ACPI_DEBUG_PRINT(plist)         acpi_ut_debug_print plist
615 #define ACPI_DEBUG_PRINT_RAW(plist)     acpi_ut_debug_print_raw plist
616
617 #else
618 /*
619  * This is the non-debug case -- make everything go away,
620  * leaving no executable debug code!
621  */
622 #define ACPI_DEBUG_EXEC(a)
623 #define ACPI_NORMAL_EXEC(a)             a;
624
625 #define ACPI_DEBUG_DEFINE(a)            do { } while(0)
626 #define ACPI_DEBUG_ONLY_MEMBERS(a)      do { } while(0)
627 #define ACPI_FUNCTION_NAME(a)           do { } while(0)
628 #define ACPI_FUNCTION_TRACE(a)          do { } while(0)
629 #define ACPI_FUNCTION_TRACE_PTR(a,b)    do { } while(0)
630 #define ACPI_FUNCTION_TRACE_U32(a,b)    do { } while(0)
631 #define ACPI_FUNCTION_TRACE_STR(a,b)    do { } while(0)
632 #define ACPI_FUNCTION_EXIT              do { } while(0)
633 #define ACPI_FUNCTION_STATUS_EXIT(s)    do { } while(0)
634 #define ACPI_FUNCTION_VALUE_EXIT(s)     do { } while(0)
635 #define ACPI_FUNCTION_ENTRY()           do { } while(0)
636 #define ACPI_DUMP_STACK_ENTRY(a)        do { } while(0)
637 #define ACPI_DUMP_OPERANDS(a,b,c,d,e)   do { } while(0)
638 #define ACPI_DUMP_ENTRY(a,b)            do { } while(0)
639 #define ACPI_DUMP_TABLES(a,b)           do { } while(0)
640 #define ACPI_DUMP_PATHNAME(a,b,c,d)     do { } while(0)
641 #define ACPI_DUMP_RESOURCE_LIST(a)      do { } while(0)
642 #define ACPI_DUMP_BUFFER(a,b)           do { } while(0)
643 #define ACPI_DEBUG_PRINT(pl)            do { } while(0)
644 #define ACPI_DEBUG_PRINT_RAW(pl)        do { } while(0)
645
646 #define return_VOID                     return
647 #define return_ACPI_STATUS(s)           return(s)
648 #define return_VALUE(s)                 return(s)
649 #define return_UINT8(s)                 return(s)
650 #define return_UINT32(s)                return(s)
651 #define return_PTR(s)                   return(s)
652
653 #endif
654
655 /*
656  * Some code only gets executed when the debugger is built in.
657  * Note that this is entirely independent of whether the
658  * DEBUG_PRINT stuff (set by ACPI_DEBUG_OUTPUT) is on, or not.
659  */
660 #ifdef ACPI_DEBUGGER
661 #define ACPI_DEBUGGER_EXEC(a)           a
662 #else
663 #define ACPI_DEBUGGER_EXEC(a)
664 #endif
665
666 #ifdef ACPI_DEBUG_OUTPUT
667 /*
668  * 1) Set name to blanks
669  * 2) Copy the object name
670  */
671 #define ACPI_ADD_OBJECT_NAME(a,b)       ACPI_MEMSET (a->common.name, ' ', sizeof (a->common.name));\
672                                                                                 ACPI_STRNCPY (a->common.name, acpi_gbl_ns_type_names[b], sizeof (a->common.name))
673 #else
674
675 #define ACPI_ADD_OBJECT_NAME(a,b)
676 #endif
677
678 /*
679  * Memory allocation tracking (DEBUG ONLY)
680  */
681 #ifndef ACPI_DBG_TRACK_ALLOCATIONS
682
683 /* Memory allocation */
684
685 #ifndef ACPI_ALLOCATE
686 #define ACPI_ALLOCATE(a)            acpi_ut_allocate((acpi_size)(a),_COMPONENT,_acpi_module_name,__LINE__)
687 #endif
688 #ifndef ACPI_ALLOCATE_ZEROED
689 #define ACPI_ALLOCATE_ZEROED(a)     acpi_ut_allocate_zeroed((acpi_size)(a), _COMPONENT,_acpi_module_name,__LINE__)
690 #endif
691 #ifndef ACPI_FREE
692 #define ACPI_FREE(a)                acpio_os_free(a)
693 #endif
694 #define ACPI_MEM_TRACKING(a)
695
696 #else
697
698 /* Memory allocation */
699
700 #define ACPI_ALLOCATE(a)            acpi_ut_allocate_and_track((acpi_size)(a),_COMPONENT,_acpi_module_name,__LINE__)
701 #define ACPI_ALLOCATE_ZEROED(a)     acpi_ut_allocate_zeroed_and_track((acpi_size)(a), _COMPONENT,_acpi_module_name,__LINE__)
702 #define ACPI_FREE(a)                acpi_ut_free_and_track(a,_COMPONENT,_acpi_module_name,__LINE__)
703 #define ACPI_MEM_TRACKING(a)        a
704
705 #endif                          /* ACPI_DBG_TRACK_ALLOCATIONS */
706
707 #endif                          /* ACMACROS_H */