Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rric/oprofile
[linux-2.6] / drivers / acpi / acpica / rsmisc.c
1 /*******************************************************************************
2  *
3  * Module Name: rsmisc - Miscellaneous resource descriptors
4  *
5  ******************************************************************************/
6
7 /*
8  * Copyright (C) 2000 - 2008, Intel Corp.
9  * All rights reserved.
10  *
11  * Redistribution and use in source and binary forms, with or without
12  * modification, are permitted provided that the following conditions
13  * are met:
14  * 1. Redistributions of source code must retain the above copyright
15  *    notice, this list of conditions, and the following disclaimer,
16  *    without modification.
17  * 2. Redistributions in binary form must reproduce at minimum a disclaimer
18  *    substantially similar to the "NO WARRANTY" disclaimer below
19  *    ("Disclaimer") and any redistribution must be conditioned upon
20  *    including a substantially similar Disclaimer requirement for further
21  *    binary redistribution.
22  * 3. Neither the names of the above-listed copyright holders nor the names
23  *    of any contributors may be used to endorse or promote products derived
24  *    from this software without specific prior written permission.
25  *
26  * Alternatively, this software may be distributed under the terms of the
27  * GNU General Public License ("GPL") version 2 as published by the Free
28  * Software Foundation.
29  *
30  * NO WARRANTY
31  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
32  * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
33  * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
34  * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
35  * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
36  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
37  * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
38  * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
39  * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
40  * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
41  * POSSIBILITY OF SUCH DAMAGES.
42  */
43
44 #include <acpi/acpi.h>
45 #include "accommon.h"
46 #include "acresrc.h"
47
48 #define _COMPONENT          ACPI_RESOURCES
49 ACPI_MODULE_NAME("rsmisc")
50 #define INIT_RESOURCE_TYPE(i)       i->resource_offset
51 #define INIT_RESOURCE_LENGTH(i)     i->aml_offset
52 #define INIT_TABLE_LENGTH(i)        i->value
53 #define COMPARE_OPCODE(i)           i->resource_offset
54 #define COMPARE_TARGET(i)           i->aml_offset
55 #define COMPARE_VALUE(i)            i->value
56 /*******************************************************************************
57  *
58  * FUNCTION:    acpi_rs_convert_aml_to_resource
59  *
60  * PARAMETERS:  Resource            - Pointer to the resource descriptor
61  *              Aml                 - Where the AML descriptor is returned
62  *              Info                - Pointer to appropriate conversion table
63  *
64  * RETURN:      Status
65  *
66  * DESCRIPTION: Convert an external AML resource descriptor to the corresponding
67  *              internal resource descriptor
68  *
69  ******************************************************************************/
70 acpi_status
71 acpi_rs_convert_aml_to_resource(struct acpi_resource *resource,
72                                 union aml_resource *aml,
73                                 struct acpi_rsconvert_info *info)
74 {
75         acpi_rs_length aml_resource_length;
76         void *source;
77         void *destination;
78         char *target;
79         u8 count;
80         u8 flags_mode = FALSE;
81         u16 item_count = 0;
82         u16 temp16 = 0;
83
84         ACPI_FUNCTION_TRACE(rs_convert_aml_to_resource);
85
86         if (((acpi_size) resource) & 0x3) {
87
88                 /* Each internal resource struct is expected to be 32-bit aligned */
89
90                 ACPI_WARNING((AE_INFO,
91                               "Misaligned resource pointer (get): %p Type %2.2X Len %X",
92                               resource, resource->type, resource->length));
93         }
94
95         /* Extract the resource Length field (does not include header length) */
96
97         aml_resource_length = acpi_ut_get_resource_length(aml);
98
99         /*
100          * First table entry must be ACPI_RSC_INITxxx and must contain the
101          * table length (# of table entries)
102          */
103         count = INIT_TABLE_LENGTH(info);
104
105         while (count) {
106                 /*
107                  * Source is the external AML byte stream buffer,
108                  * destination is the internal resource descriptor
109                  */
110                 source = ACPI_ADD_PTR(void, aml, info->aml_offset);
111                 destination =
112                     ACPI_ADD_PTR(void, resource, info->resource_offset);
113
114                 switch (info->opcode) {
115                 case ACPI_RSC_INITGET:
116                         /*
117                          * Get the resource type and the initial (minimum) length
118                          */
119                         ACPI_MEMSET(resource, 0, INIT_RESOURCE_LENGTH(info));
120                         resource->type = INIT_RESOURCE_TYPE(info);
121                         resource->length = INIT_RESOURCE_LENGTH(info);
122                         break;
123
124                 case ACPI_RSC_INITSET:
125                         break;
126
127                 case ACPI_RSC_FLAGINIT:
128
129                         flags_mode = TRUE;
130                         break;
131
132                 case ACPI_RSC_1BITFLAG:
133                         /*
134                          * Mask and shift the flag bit
135                          */
136                         ACPI_SET8(destination) = (u8)
137                             ((ACPI_GET8(source) >> info->value) & 0x01);
138                         break;
139
140                 case ACPI_RSC_2BITFLAG:
141                         /*
142                          * Mask and shift the flag bits
143                          */
144                         ACPI_SET8(destination) = (u8)
145                             ((ACPI_GET8(source) >> info->value) & 0x03);
146                         break;
147
148                 case ACPI_RSC_COUNT:
149
150                         item_count = ACPI_GET8(source);
151                         ACPI_SET8(destination) = (u8) item_count;
152
153                         resource->length = resource->length +
154                             (info->value * (item_count - 1));
155                         break;
156
157                 case ACPI_RSC_COUNT16:
158
159                         item_count = aml_resource_length;
160                         ACPI_SET16(destination) = item_count;
161
162                         resource->length = resource->length +
163                             (info->value * (item_count - 1));
164                         break;
165
166                 case ACPI_RSC_LENGTH:
167
168                         resource->length = resource->length + info->value;
169                         break;
170
171                 case ACPI_RSC_MOVE8:
172                 case ACPI_RSC_MOVE16:
173                 case ACPI_RSC_MOVE32:
174                 case ACPI_RSC_MOVE64:
175                         /*
176                          * Raw data move. Use the Info value field unless item_count has
177                          * been previously initialized via a COUNT opcode
178                          */
179                         if (info->value) {
180                                 item_count = info->value;
181                         }
182                         acpi_rs_move_data(destination, source, item_count,
183                                           info->opcode);
184                         break;
185
186                 case ACPI_RSC_SET8:
187
188                         ACPI_MEMSET(destination, info->aml_offset, info->value);
189                         break;
190
191                 case ACPI_RSC_DATA8:
192
193                         target = ACPI_ADD_PTR(char, resource, info->value);
194                         ACPI_MEMCPY(destination, source, ACPI_GET16(target));
195                         break;
196
197                 case ACPI_RSC_ADDRESS:
198                         /*
199                          * Common handler for address descriptor flags
200                          */
201                         if (!acpi_rs_get_address_common(resource, aml)) {
202                                 return_ACPI_STATUS
203                                     (AE_AML_INVALID_RESOURCE_TYPE);
204                         }
205                         break;
206
207                 case ACPI_RSC_SOURCE:
208                         /*
209                          * Optional resource_source (Index and String)
210                          */
211                         resource->length +=
212                             acpi_rs_get_resource_source(aml_resource_length,
213                                                         info->value,
214                                                         destination, aml, NULL);
215                         break;
216
217                 case ACPI_RSC_SOURCEX:
218                         /*
219                          * Optional resource_source (Index and String). This is the more
220                          * complicated case used by the Interrupt() macro
221                          */
222                         target =
223                             ACPI_ADD_PTR(char, resource,
224                                          info->aml_offset + (item_count * 4));
225
226                         resource->length +=
227                             acpi_rs_get_resource_source(aml_resource_length,
228                                                         (acpi_rs_length) (((item_count - 1) * sizeof(u32)) + info->value), destination, aml, target);
229                         break;
230
231                 case ACPI_RSC_BITMASK:
232                         /*
233                          * 8-bit encoded bitmask (DMA macro)
234                          */
235                         item_count =
236                             acpi_rs_decode_bitmask(ACPI_GET8(source),
237                                                    destination);
238                         if (item_count) {
239                                 resource->length += (item_count - 1);
240                         }
241
242                         target = ACPI_ADD_PTR(char, resource, info->value);
243                         ACPI_SET8(target) = (u8) item_count;
244                         break;
245
246                 case ACPI_RSC_BITMASK16:
247                         /*
248                          * 16-bit encoded bitmask (IRQ macro)
249                          */
250                         ACPI_MOVE_16_TO_16(&temp16, source);
251
252                         item_count =
253                             acpi_rs_decode_bitmask(temp16, destination);
254                         if (item_count) {
255                                 resource->length += (item_count - 1);
256                         }
257
258                         target = ACPI_ADD_PTR(char, resource, info->value);
259                         ACPI_SET8(target) = (u8) item_count;
260                         break;
261
262                 case ACPI_RSC_EXIT_NE:
263                         /*
264                          * Control - Exit conversion if not equal
265                          */
266                         switch (info->resource_offset) {
267                         case ACPI_RSC_COMPARE_AML_LENGTH:
268                                 if (aml_resource_length != info->value) {
269                                         goto exit;
270                                 }
271                                 break;
272
273                         case ACPI_RSC_COMPARE_VALUE:
274                                 if (ACPI_GET8(source) != info->value) {
275                                         goto exit;
276                                 }
277                                 break;
278
279                         default:
280
281                                 ACPI_ERROR((AE_INFO,
282                                             "Invalid conversion sub-opcode"));
283                                 return_ACPI_STATUS(AE_BAD_PARAMETER);
284                         }
285                         break;
286
287                 default:
288
289                         ACPI_ERROR((AE_INFO, "Invalid conversion opcode"));
290                         return_ACPI_STATUS(AE_BAD_PARAMETER);
291                 }
292
293                 count--;
294                 info++;
295         }
296
297       exit:
298         if (!flags_mode) {
299
300                 /* Round the resource struct length up to the next boundary (32 or 64) */
301
302                 resource->length =
303                     (u32) ACPI_ROUND_UP_TO_NATIVE_WORD(resource->length);
304         }
305         return_ACPI_STATUS(AE_OK);
306 }
307
308 /*******************************************************************************
309  *
310  * FUNCTION:    acpi_rs_convert_resource_to_aml
311  *
312  * PARAMETERS:  Resource            - Pointer to the resource descriptor
313  *              Aml                 - Where the AML descriptor is returned
314  *              Info                - Pointer to appropriate conversion table
315  *
316  * RETURN:      Status
317  *
318  * DESCRIPTION: Convert an internal resource descriptor to the corresponding
319  *              external AML resource descriptor.
320  *
321  ******************************************************************************/
322
323 acpi_status
324 acpi_rs_convert_resource_to_aml(struct acpi_resource *resource,
325                                 union aml_resource *aml,
326                                 struct acpi_rsconvert_info *info)
327 {
328         void *source = NULL;
329         void *destination;
330         acpi_rsdesc_size aml_length = 0;
331         u8 count;
332         u16 temp16 = 0;
333         u16 item_count = 0;
334
335         ACPI_FUNCTION_TRACE(rs_convert_resource_to_aml);
336
337         /*
338          * First table entry must be ACPI_RSC_INITxxx and must contain the
339          * table length (# of table entries)
340          */
341         count = INIT_TABLE_LENGTH(info);
342
343         while (count) {
344                 /*
345                  * Source is the internal resource descriptor,
346                  * destination is the external AML byte stream buffer
347                  */
348                 source = ACPI_ADD_PTR(void, resource, info->resource_offset);
349                 destination = ACPI_ADD_PTR(void, aml, info->aml_offset);
350
351                 switch (info->opcode) {
352                 case ACPI_RSC_INITSET:
353
354                         ACPI_MEMSET(aml, 0, INIT_RESOURCE_LENGTH(info));
355                         aml_length = INIT_RESOURCE_LENGTH(info);
356                         acpi_rs_set_resource_header(INIT_RESOURCE_TYPE(info),
357                                                     aml_length, aml);
358                         break;
359
360                 case ACPI_RSC_INITGET:
361                         break;
362
363                 case ACPI_RSC_FLAGINIT:
364                         /*
365                          * Clear the flag byte
366                          */
367                         ACPI_SET8(destination) = 0;
368                         break;
369
370                 case ACPI_RSC_1BITFLAG:
371                         /*
372                          * Mask and shift the flag bit
373                          */
374                         ACPI_SET8(destination) |= (u8)
375                             ((ACPI_GET8(source) & 0x01) << info->value);
376                         break;
377
378                 case ACPI_RSC_2BITFLAG:
379                         /*
380                          * Mask and shift the flag bits
381                          */
382                         ACPI_SET8(destination) |= (u8)
383                             ((ACPI_GET8(source) & 0x03) << info->value);
384                         break;
385
386                 case ACPI_RSC_COUNT:
387
388                         item_count = ACPI_GET8(source);
389                         ACPI_SET8(destination) = (u8) item_count;
390
391                         aml_length =
392                             (u16) (aml_length +
393                                    (info->value * (item_count - 1)));
394                         break;
395
396                 case ACPI_RSC_COUNT16:
397
398                         item_count = ACPI_GET16(source);
399                         aml_length = (u16) (aml_length + item_count);
400                         acpi_rs_set_resource_length(aml_length, aml);
401                         break;
402
403                 case ACPI_RSC_LENGTH:
404
405                         acpi_rs_set_resource_length(info->value, aml);
406                         break;
407
408                 case ACPI_RSC_MOVE8:
409                 case ACPI_RSC_MOVE16:
410                 case ACPI_RSC_MOVE32:
411                 case ACPI_RSC_MOVE64:
412
413                         if (info->value) {
414                                 item_count = info->value;
415                         }
416                         acpi_rs_move_data(destination, source, item_count,
417                                           info->opcode);
418                         break;
419
420                 case ACPI_RSC_ADDRESS:
421
422                         /* Set the Resource Type, General Flags, and Type-Specific Flags */
423
424                         acpi_rs_set_address_common(aml, resource);
425                         break;
426
427                 case ACPI_RSC_SOURCEX:
428                         /*
429                          * Optional resource_source (Index and String)
430                          */
431                         aml_length =
432                             acpi_rs_set_resource_source(aml, (acpi_rs_length)
433                                                         aml_length, source);
434                         acpi_rs_set_resource_length(aml_length, aml);
435                         break;
436
437                 case ACPI_RSC_SOURCE:
438                         /*
439                          * Optional resource_source (Index and String). This is the more
440                          * complicated case used by the Interrupt() macro
441                          */
442                         aml_length =
443                             acpi_rs_set_resource_source(aml, info->value,
444                                                         source);
445                         acpi_rs_set_resource_length(aml_length, aml);
446                         break;
447
448                 case ACPI_RSC_BITMASK:
449                         /*
450                          * 8-bit encoded bitmask (DMA macro)
451                          */
452                         ACPI_SET8(destination) = (u8)
453                             acpi_rs_encode_bitmask(source,
454                                                    *ACPI_ADD_PTR(u8, resource,
455                                                                  info->value));
456                         break;
457
458                 case ACPI_RSC_BITMASK16:
459                         /*
460                          * 16-bit encoded bitmask (IRQ macro)
461                          */
462                         temp16 = acpi_rs_encode_bitmask(source,
463                                                         *ACPI_ADD_PTR(u8,
464                                                                       resource,
465                                                                       info->
466                                                                       value));
467                         ACPI_MOVE_16_TO_16(destination, &temp16);
468                         break;
469
470                 case ACPI_RSC_EXIT_LE:
471                         /*
472                          * Control - Exit conversion if less than or equal
473                          */
474                         if (item_count <= info->value) {
475                                 goto exit;
476                         }
477                         break;
478
479                 case ACPI_RSC_EXIT_NE:
480                         /*
481                          * Control - Exit conversion if not equal
482                          */
483                         switch (COMPARE_OPCODE(info)) {
484                         case ACPI_RSC_COMPARE_VALUE:
485
486                                 if (*ACPI_ADD_PTR(u8, resource,
487                                                   COMPARE_TARGET(info)) !=
488                                     COMPARE_VALUE(info)) {
489                                         goto exit;
490                                 }
491                                 break;
492
493                         default:
494
495                                 ACPI_ERROR((AE_INFO,
496                                             "Invalid conversion sub-opcode"));
497                                 return_ACPI_STATUS(AE_BAD_PARAMETER);
498                         }
499                         break;
500
501                 case ACPI_RSC_EXIT_EQ:
502                         /*
503                          * Control - Exit conversion if equal
504                          */
505                         if (*ACPI_ADD_PTR(u8, resource,
506                                           COMPARE_TARGET(info)) ==
507                             COMPARE_VALUE(info)) {
508                                 goto exit;
509                         }
510                         break;
511
512                 default:
513
514                         ACPI_ERROR((AE_INFO, "Invalid conversion opcode"));
515                         return_ACPI_STATUS(AE_BAD_PARAMETER);
516                 }
517
518                 count--;
519                 info++;
520         }
521
522       exit:
523         return_ACPI_STATUS(AE_OK);
524 }
525
526 #if 0
527 /* Previous resource validations */
528
529 if (aml->ext_address64.revision_iD != AML_RESOURCE_EXTENDED_ADDRESS_REVISION) {
530         return_ACPI_STATUS(AE_SUPPORT);
531 }
532
533 if (resource->data.start_dpf.performance_robustness >= 3) {
534         return_ACPI_STATUS(AE_AML_BAD_RESOURCE_VALUE);
535 }
536
537 if (((aml->irq.flags & 0x09) == 0x00) || ((aml->irq.flags & 0x09) == 0x09)) {
538         /*
539          * Only [active_high, edge_sensitive] or [active_low, level_sensitive]
540          * polarity/trigger interrupts are allowed (ACPI spec, section
541          * "IRQ Format"), so 0x00 and 0x09 are illegal.
542          */
543         ACPI_ERROR((AE_INFO,
544                     "Invalid interrupt polarity/trigger in resource list, %X",
545                     aml->irq.flags));
546         return_ACPI_STATUS(AE_BAD_DATA);
547 }
548
549 resource->data.extended_irq.interrupt_count = temp8;
550 if (temp8 < 1) {
551
552         /* Must have at least one IRQ */
553
554         return_ACPI_STATUS(AE_AML_BAD_RESOURCE_LENGTH);
555 }
556
557 if (resource->data.dma.transfer == 0x03) {
558         ACPI_ERROR((AE_INFO, "Invalid DMA.Transfer preference (3)"));
559         return_ACPI_STATUS(AE_BAD_DATA);
560 }
561 #endif