Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6
[linux-2.6] / drivers / hwmon / w83792d.c
1 /*
2     w83792d.c - Part of lm_sensors, Linux kernel modules for hardware
3                 monitoring
4     Copyright (C) 2004, 2005 Winbond Electronics Corp.
5                         Chunhao Huang <DZShen@Winbond.com.tw>,
6                         Rudolf Marek <r.marek@assembler.cz>
7
8     This program is free software; you can redistribute it and/or modify
9     it under the terms of the GNU General Public License as published by
10     the Free Software Foundation; either version 2 of the License, or
11     (at your option) any later version.
12
13     This program is distributed in the hope that it will be useful,
14     but WITHOUT ANY WARRANTY; without even the implied warranty of
15     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
16     GNU General Public License for more details.
17
18     You should have received a copy of the GNU General Public License
19     along with this program; if not, write to the Free Software
20     Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
21
22     Note:
23     1. This driver is only for 2.6 kernel, 2.4 kernel need a different driver.
24     2. This driver is only for Winbond W83792D C version device, there
25        are also some motherboards with B version W83792D device. The
26        calculation method to in6-in7(measured value, limits) is a little
27        different between C and B version. C or B version can be identified
28        by CR[0x49h].
29 */
30
31 /*
32     Supports following chips:
33
34     Chip        #vin    #fanin  #pwm    #temp   wchipid vendid  i2c     ISA
35     w83792d     9       7       7       3       0x7a    0x5ca3  yes     no
36 */
37
38 #include <linux/module.h>
39 #include <linux/init.h>
40 #include <linux/slab.h>
41 #include <linux/i2c.h>
42 #include <linux/hwmon.h>
43 #include <linux/hwmon-sysfs.h>
44 #include <linux/err.h>
45 #include <linux/mutex.h>
46 #include <linux/sysfs.h>
47
48 /* Addresses to scan */
49 static const unsigned short normal_i2c[] = { 0x2c, 0x2d, 0x2e, 0x2f,
50                                                 I2C_CLIENT_END };
51
52 /* Insmod parameters */
53 I2C_CLIENT_INSMOD_1(w83792d);
54 I2C_CLIENT_MODULE_PARM(force_subclients, "List of subclient addresses: "
55                         "{bus, clientaddr, subclientaddr1, subclientaddr2}");
56
57 static int init;
58 module_param(init, bool, 0);
59 MODULE_PARM_DESC(init, "Set to one to force chip initialization");
60
61 /* The W83792D registers */
62 static const u8 W83792D_REG_IN[9] = {
63         0x20,   /* Vcore A in DataSheet */
64         0x21,   /* Vcore B in DataSheet */
65         0x22,   /* VIN0 in DataSheet */
66         0x23,   /* VIN1 in DataSheet */
67         0x24,   /* VIN2 in DataSheet */
68         0x25,   /* VIN3 in DataSheet */
69         0x26,   /* 5VCC in DataSheet */
70         0xB0,   /* 5VSB in DataSheet */
71         0xB1    /* VBAT in DataSheet */
72 };
73 #define W83792D_REG_LOW_BITS1 0x3E  /* Low Bits I in DataSheet */
74 #define W83792D_REG_LOW_BITS2 0x3F  /* Low Bits II in DataSheet */
75 static const u8 W83792D_REG_IN_MAX[9] = {
76         0x2B,   /* Vcore A High Limit in DataSheet */
77         0x2D,   /* Vcore B High Limit in DataSheet */
78         0x2F,   /* VIN0 High Limit in DataSheet */
79         0x31,   /* VIN1 High Limit in DataSheet */
80         0x33,   /* VIN2 High Limit in DataSheet */
81         0x35,   /* VIN3 High Limit in DataSheet */
82         0x37,   /* 5VCC High Limit in DataSheet */
83         0xB4,   /* 5VSB High Limit in DataSheet */
84         0xB6    /* VBAT High Limit in DataSheet */
85 };
86 static const u8 W83792D_REG_IN_MIN[9] = {
87         0x2C,   /* Vcore A Low Limit in DataSheet */
88         0x2E,   /* Vcore B Low Limit in DataSheet */
89         0x30,   /* VIN0 Low Limit in DataSheet */
90         0x32,   /* VIN1 Low Limit in DataSheet */
91         0x34,   /* VIN2 Low Limit in DataSheet */
92         0x36,   /* VIN3 Low Limit in DataSheet */
93         0x38,   /* 5VCC Low Limit in DataSheet */
94         0xB5,   /* 5VSB Low Limit in DataSheet */
95         0xB7    /* VBAT Low Limit in DataSheet */
96 };
97 static const u8 W83792D_REG_FAN[7] = {
98         0x28,   /* FAN 1 Count in DataSheet */
99         0x29,   /* FAN 2 Count in DataSheet */
100         0x2A,   /* FAN 3 Count in DataSheet */
101         0xB8,   /* FAN 4 Count in DataSheet */
102         0xB9,   /* FAN 5 Count in DataSheet */
103         0xBA,   /* FAN 6 Count in DataSheet */
104         0xBE    /* FAN 7 Count in DataSheet */
105 };
106 static const u8 W83792D_REG_FAN_MIN[7] = {
107         0x3B,   /* FAN 1 Count Low Limit in DataSheet */
108         0x3C,   /* FAN 2 Count Low Limit in DataSheet */
109         0x3D,   /* FAN 3 Count Low Limit in DataSheet */
110         0xBB,   /* FAN 4 Count Low Limit in DataSheet */
111         0xBC,   /* FAN 5 Count Low Limit in DataSheet */
112         0xBD,   /* FAN 6 Count Low Limit in DataSheet */
113         0xBF    /* FAN 7 Count Low Limit in DataSheet */
114 };
115 #define W83792D_REG_FAN_CFG 0x84        /* FAN Configuration in DataSheet */
116 static const u8 W83792D_REG_FAN_DIV[4] = {
117         0x47,   /* contains FAN2 and FAN1 Divisor */
118         0x5B,   /* contains FAN4 and FAN3 Divisor */
119         0x5C,   /* contains FAN6 and FAN5 Divisor */
120         0x9E    /* contains FAN7 Divisor. */
121 };
122 static const u8 W83792D_REG_PWM[7] = {
123         0x81,   /* FAN 1 Duty Cycle, be used to control */
124         0x83,   /* FAN 2 Duty Cycle, be used to control */
125         0x94,   /* FAN 3 Duty Cycle, be used to control */
126         0xA3,   /* FAN 4 Duty Cycle, be used to control */
127         0xA4,   /* FAN 5 Duty Cycle, be used to control */
128         0xA5,   /* FAN 6 Duty Cycle, be used to control */
129         0xA6    /* FAN 7 Duty Cycle, be used to control */
130 };
131 #define W83792D_REG_BANK                0x4E
132 #define W83792D_REG_TEMP2_CONFIG        0xC2
133 #define W83792D_REG_TEMP3_CONFIG        0xCA
134
135 static const u8 W83792D_REG_TEMP1[3] = {
136         0x27,   /* TEMP 1 in DataSheet */
137         0x39,   /* TEMP 1 Over in DataSheet */
138         0x3A,   /* TEMP 1 Hyst in DataSheet */
139 };
140
141 static const u8 W83792D_REG_TEMP_ADD[2][6] = {
142         { 0xC0,         /* TEMP 2 in DataSheet */
143           0xC1,         /* TEMP 2(0.5 deg) in DataSheet */
144           0xC5,         /* TEMP 2 Over High part in DataSheet */
145           0xC6,         /* TEMP 2 Over Low part in DataSheet */
146           0xC3,         /* TEMP 2 Thyst High part in DataSheet */
147           0xC4 },       /* TEMP 2 Thyst Low part in DataSheet */
148         { 0xC8,         /* TEMP 3 in DataSheet */
149           0xC9,         /* TEMP 3(0.5 deg) in DataSheet */
150           0xCD,         /* TEMP 3 Over High part in DataSheet */
151           0xCE,         /* TEMP 3 Over Low part in DataSheet */
152           0xCB,         /* TEMP 3 Thyst High part in DataSheet */
153           0xCC }        /* TEMP 3 Thyst Low part in DataSheet */
154 };
155
156 static const u8 W83792D_REG_THERMAL[3] = {
157         0x85,   /* SmartFanI: Fan1 target value */
158         0x86,   /* SmartFanI: Fan2 target value */
159         0x96    /* SmartFanI: Fan3 target value */
160 };
161
162 static const u8 W83792D_REG_TOLERANCE[3] = {
163         0x87,   /* (bit3-0)SmartFan Fan1 tolerance */
164         0x87,   /* (bit7-4)SmartFan Fan2 tolerance */
165         0x97    /* (bit3-0)SmartFan Fan3 tolerance */
166 };
167
168 static const u8 W83792D_REG_POINTS[3][4] = {
169         { 0x85,         /* SmartFanII: Fan1 temp point 1 */
170           0xE3,         /* SmartFanII: Fan1 temp point 2 */
171           0xE4,         /* SmartFanII: Fan1 temp point 3 */
172           0xE5 },       /* SmartFanII: Fan1 temp point 4 */
173         { 0x86,         /* SmartFanII: Fan2 temp point 1 */
174           0xE6,         /* SmartFanII: Fan2 temp point 2 */
175           0xE7,         /* SmartFanII: Fan2 temp point 3 */
176           0xE8 },       /* SmartFanII: Fan2 temp point 4 */
177         { 0x96,         /* SmartFanII: Fan3 temp point 1 */
178           0xE9,         /* SmartFanII: Fan3 temp point 2 */
179           0xEA,         /* SmartFanII: Fan3 temp point 3 */
180           0xEB }        /* SmartFanII: Fan3 temp point 4 */
181 };
182
183 static const u8 W83792D_REG_LEVELS[3][4] = {
184         { 0x88,         /* (bit3-0) SmartFanII: Fan1 Non-Stop */
185           0x88,         /* (bit7-4) SmartFanII: Fan1 Level 1 */
186           0xE0,         /* (bit7-4) SmartFanII: Fan1 Level 2 */
187           0xE0 },       /* (bit3-0) SmartFanII: Fan1 Level 3 */
188         { 0x89,         /* (bit3-0) SmartFanII: Fan2 Non-Stop */
189           0x89,         /* (bit7-4) SmartFanII: Fan2 Level 1 */
190           0xE1,         /* (bit7-4) SmartFanII: Fan2 Level 2 */
191           0xE1 },       /* (bit3-0) SmartFanII: Fan2 Level 3 */
192         { 0x98,         /* (bit3-0) SmartFanII: Fan3 Non-Stop */
193           0x98,         /* (bit7-4) SmartFanII: Fan3 Level 1 */
194           0xE2,         /* (bit7-4) SmartFanII: Fan3 Level 2 */
195           0xE2 }        /* (bit3-0) SmartFanII: Fan3 Level 3 */
196 };
197
198 #define W83792D_REG_GPIO_EN             0x1A
199 #define W83792D_REG_CONFIG              0x40
200 #define W83792D_REG_VID_FANDIV          0x47
201 #define W83792D_REG_CHIPID              0x49
202 #define W83792D_REG_WCHIPID             0x58
203 #define W83792D_REG_CHIPMAN             0x4F
204 #define W83792D_REG_PIN                 0x4B
205 #define W83792D_REG_I2C_SUBADDR         0x4A
206
207 #define W83792D_REG_ALARM1 0xA9         /* realtime status register1 */
208 #define W83792D_REG_ALARM2 0xAA         /* realtime status register2 */
209 #define W83792D_REG_ALARM3 0xAB         /* realtime status register3 */
210 #define W83792D_REG_CHASSIS 0x42        /* Bit 5: Case Open status bit */
211 #define W83792D_REG_CHASSIS_CLR 0x44    /* Bit 7: Case Open CLR_CHS/Reset bit */
212
213 /* control in0/in1 's limit modifiability */
214 #define W83792D_REG_VID_IN_B            0x17
215
216 #define W83792D_REG_VBAT                0x5D
217 #define W83792D_REG_I2C_ADDR            0x48
218
219 /* Conversions. Rounding and limit checking is only done on the TO_REG
220    variants. Note that you should be a bit careful with which arguments
221    these macros are called: arguments may be evaluated more than once.
222    Fixing this is just not worth it. */
223 #define IN_FROM_REG(nr,val) (((nr)<=1)?(val*2): \
224                                 ((((nr)==6)||((nr)==7))?(val*6):(val*4)))
225 #define IN_TO_REG(nr,val) (((nr)<=1)?(val/2): \
226                                 ((((nr)==6)||((nr)==7))?(val/6):(val/4)))
227
228 static inline u8
229 FAN_TO_REG(long rpm, int div)
230 {
231         if (rpm == 0)
232                 return 255;
233         rpm = SENSORS_LIMIT(rpm, 1, 1000000);
234         return SENSORS_LIMIT((1350000 + rpm * div / 2) / (rpm * div), 1, 254);
235 }
236
237 #define FAN_FROM_REG(val,div)   ((val) == 0   ? -1 : \
238                                 ((val) == 255 ? 0 : \
239                                                 1350000 / ((val) * (div))))
240
241 /* for temp1 */
242 #define TEMP1_TO_REG(val)       (SENSORS_LIMIT(((val) < 0 ? (val)+0x100*1000 \
243                                         : (val)) / 1000, 0, 0xff))
244 #define TEMP1_FROM_REG(val)     (((val) & 0x80 ? (val)-0x100 : (val)) * 1000)
245 /* for temp2 and temp3, because they need addtional resolution */
246 #define TEMP_ADD_FROM_REG(val1, val2) \
247         ((((val1) & 0x80 ? (val1)-0x100 \
248                 : (val1)) * 1000) + ((val2 & 0x80) ? 500 : 0))
249 #define TEMP_ADD_TO_REG_HIGH(val) \
250         (SENSORS_LIMIT(((val) < 0 ? (val)+0x100*1000 \
251                         : (val)) / 1000, 0, 0xff))
252 #define TEMP_ADD_TO_REG_LOW(val)        ((val%1000) ? 0x80 : 0x00)
253
254 #define DIV_FROM_REG(val)               (1 << (val))
255
256 static inline u8
257 DIV_TO_REG(long val)
258 {
259         int i;
260         val = SENSORS_LIMIT(val, 1, 128) >> 1;
261         for (i = 0; i < 7; i++) {
262                 if (val == 0)
263                         break;
264                 val >>= 1;
265         }
266         return ((u8) i);
267 }
268
269 struct w83792d_data {
270         struct device *hwmon_dev;
271
272         struct mutex update_lock;
273         char valid;             /* !=0 if following fields are valid */
274         unsigned long last_updated;     /* In jiffies */
275
276         /* array of 2 pointers to subclients */
277         struct i2c_client *lm75[2];
278
279         u8 in[9];               /* Register value */
280         u8 in_max[9];           /* Register value */
281         u8 in_min[9];           /* Register value */
282         u16 low_bits;           /* Additional resolution to voltage in6-0 */
283         u8 fan[7];              /* Register value */
284         u8 fan_min[7];          /* Register value */
285         u8 temp1[3];            /* current, over, thyst */
286         u8 temp_add[2][6];      /* Register value */
287         u8 fan_div[7];          /* Register encoding, shifted right */
288         u8 pwm[7];              /* We only consider the first 3 set of pwm,
289                                    although 792 chip has 7 set of pwm. */
290         u8 pwmenable[3];
291         u32 alarms;             /* realtime status register encoding,combined */
292         u8 chassis;             /* Chassis status */
293         u8 chassis_clear;       /* CLR_CHS, clear chassis intrusion detection */
294         u8 thermal_cruise[3];   /* Smart FanI: Fan1,2,3 target value */
295         u8 tolerance[3];        /* Fan1,2,3 tolerance(Smart Fan I/II) */
296         u8 sf2_points[3][4];    /* Smart FanII: Fan1,2,3 temperature points */
297         u8 sf2_levels[3][4];    /* Smart FanII: Fan1,2,3 duty cycle levels */
298 };
299
300 static int w83792d_probe(struct i2c_client *client,
301                          const struct i2c_device_id *id);
302 static int w83792d_detect(struct i2c_client *client, int kind,
303                           struct i2c_board_info *info);
304 static int w83792d_remove(struct i2c_client *client);
305 static struct w83792d_data *w83792d_update_device(struct device *dev);
306
307 #ifdef DEBUG
308 static void w83792d_print_debug(struct w83792d_data *data, struct device *dev);
309 #endif
310
311 static void w83792d_init_client(struct i2c_client *client);
312
313 static const struct i2c_device_id w83792d_id[] = {
314         { "w83792d", w83792d },
315         { }
316 };
317 MODULE_DEVICE_TABLE(i2c, w83792d_id);
318
319 static struct i2c_driver w83792d_driver = {
320         .class          = I2C_CLASS_HWMON,
321         .driver = {
322                 .name = "w83792d",
323         },
324         .probe          = w83792d_probe,
325         .remove         = w83792d_remove,
326         .id_table       = w83792d_id,
327         .detect         = w83792d_detect,
328         .address_data   = &addr_data,
329 };
330
331 static inline long in_count_from_reg(int nr, struct w83792d_data *data)
332 {
333         /* in7 and in8 do not have low bits, but the formula still works */
334         return ((data->in[nr] << 2) | ((data->low_bits >> (2 * nr)) & 0x03));
335 }
336
337 /* The SMBus locks itself. The Winbond W83792D chip has a bank register,
338    but the driver only accesses registers in bank 0, so we don't have
339    to switch banks and lock access between switches. */
340 static inline int w83792d_read_value(struct i2c_client *client, u8 reg)
341 {
342         return i2c_smbus_read_byte_data(client, reg);
343 }
344
345 static inline int
346 w83792d_write_value(struct i2c_client *client, u8 reg, u8 value)
347 {
348         return i2c_smbus_write_byte_data(client, reg, value);
349 }
350
351 /* following are the sysfs callback functions */
352 static ssize_t show_in(struct device *dev, struct device_attribute *attr,
353                         char *buf)
354 {
355         struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr);
356         int nr = sensor_attr->index;
357         struct w83792d_data *data = w83792d_update_device(dev);
358         return sprintf(buf,"%ld\n", IN_FROM_REG(nr,(in_count_from_reg(nr, data))));
359 }
360
361 #define show_in_reg(reg) \
362 static ssize_t show_##reg(struct device *dev, struct device_attribute *attr, \
363                         char *buf) \
364 { \
365         struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr); \
366         int nr = sensor_attr->index; \
367         struct w83792d_data *data = w83792d_update_device(dev); \
368         return sprintf(buf,"%ld\n", (long)(IN_FROM_REG(nr, (data->reg[nr])*4))); \
369 }
370
371 show_in_reg(in_min);
372 show_in_reg(in_max);
373
374 #define store_in_reg(REG, reg) \
375 static ssize_t store_in_##reg (struct device *dev, \
376                                 struct device_attribute *attr, \
377                                 const char *buf, size_t count) \
378 { \
379         struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr); \
380         int nr = sensor_attr->index; \
381         struct i2c_client *client = to_i2c_client(dev); \
382         struct w83792d_data *data = i2c_get_clientdata(client); \
383         u32 val; \
384          \
385         val = simple_strtoul(buf, NULL, 10); \
386         mutex_lock(&data->update_lock); \
387         data->in_##reg[nr] = SENSORS_LIMIT(IN_TO_REG(nr, val)/4, 0, 255); \
388         w83792d_write_value(client, W83792D_REG_IN_##REG[nr], data->in_##reg[nr]); \
389         mutex_unlock(&data->update_lock); \
390          \
391         return count; \
392 }
393 store_in_reg(MIN, min);
394 store_in_reg(MAX, max);
395
396 #define show_fan_reg(reg) \
397 static ssize_t show_##reg (struct device *dev, struct device_attribute *attr, \
398                         char *buf) \
399 { \
400         struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr); \
401         int nr = sensor_attr->index - 1; \
402         struct w83792d_data *data = w83792d_update_device(dev); \
403         return sprintf(buf,"%d\n", \
404                 FAN_FROM_REG(data->reg[nr], DIV_FROM_REG(data->fan_div[nr]))); \
405 }
406
407 show_fan_reg(fan);
408 show_fan_reg(fan_min);
409
410 static ssize_t
411 store_fan_min(struct device *dev, struct device_attribute *attr,
412                 const char *buf, size_t count)
413 {
414         struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr);
415         int nr = sensor_attr->index - 1;
416         struct i2c_client *client = to_i2c_client(dev);
417         struct w83792d_data *data = i2c_get_clientdata(client);
418         u32 val;
419
420         val = simple_strtoul(buf, NULL, 10);
421         mutex_lock(&data->update_lock);
422         data->fan_min[nr] = FAN_TO_REG(val, DIV_FROM_REG(data->fan_div[nr]));
423         w83792d_write_value(client, W83792D_REG_FAN_MIN[nr],
424                                 data->fan_min[nr]);
425         mutex_unlock(&data->update_lock);
426
427         return count;
428 }
429
430 static ssize_t
431 show_fan_div(struct device *dev, struct device_attribute *attr,
432                 char *buf)
433 {
434         struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr);
435         int nr = sensor_attr->index;
436         struct w83792d_data *data = w83792d_update_device(dev);
437         return sprintf(buf, "%u\n", DIV_FROM_REG(data->fan_div[nr - 1]));
438 }
439
440 /* Note: we save and restore the fan minimum here, because its value is
441    determined in part by the fan divisor.  This follows the principle of
442    least surprise; the user doesn't expect the fan minimum to change just
443    because the divisor changed. */
444 static ssize_t
445 store_fan_div(struct device *dev, struct device_attribute *attr,
446                 const char *buf, size_t count)
447 {
448         struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr);
449         int nr = sensor_attr->index - 1;
450         struct i2c_client *client = to_i2c_client(dev);
451         struct w83792d_data *data = i2c_get_clientdata(client);
452         unsigned long min;
453         /*u8 reg;*/
454         u8 fan_div_reg = 0;
455         u8 tmp_fan_div;
456
457         /* Save fan_min */
458         mutex_lock(&data->update_lock);
459         min = FAN_FROM_REG(data->fan_min[nr],
460                            DIV_FROM_REG(data->fan_div[nr]));
461
462         data->fan_div[nr] = DIV_TO_REG(simple_strtoul(buf, NULL, 10));
463
464         fan_div_reg = w83792d_read_value(client, W83792D_REG_FAN_DIV[nr >> 1]);
465         fan_div_reg &= (nr & 0x01) ? 0x8f : 0xf8;
466         tmp_fan_div = (nr & 0x01) ? (((data->fan_div[nr]) << 4) & 0x70)
467                                         : ((data->fan_div[nr]) & 0x07);
468         w83792d_write_value(client, W83792D_REG_FAN_DIV[nr >> 1],
469                                         fan_div_reg | tmp_fan_div);
470
471         /* Restore fan_min */
472         data->fan_min[nr] = FAN_TO_REG(min, DIV_FROM_REG(data->fan_div[nr]));
473         w83792d_write_value(client, W83792D_REG_FAN_MIN[nr], data->fan_min[nr]);
474         mutex_unlock(&data->update_lock);
475
476         return count;
477 }
478
479 /* read/write the temperature1, includes measured value and limits */
480
481 static ssize_t show_temp1(struct device *dev, struct device_attribute *attr,
482                                 char *buf)
483 {
484         struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr);
485         int nr = sensor_attr->index;
486         struct w83792d_data *data = w83792d_update_device(dev);
487         return sprintf(buf, "%d\n", TEMP1_FROM_REG(data->temp1[nr]));
488 }
489
490 static ssize_t store_temp1(struct device *dev, struct device_attribute *attr,
491                                 const char *buf, size_t count)
492 {
493         struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr);
494         int nr = sensor_attr->index;
495         struct i2c_client *client = to_i2c_client(dev);
496         struct w83792d_data *data = i2c_get_clientdata(client);
497         s32 val;
498
499         val = simple_strtol(buf, NULL, 10);
500         mutex_lock(&data->update_lock);
501         data->temp1[nr] = TEMP1_TO_REG(val);
502         w83792d_write_value(client, W83792D_REG_TEMP1[nr],
503                 data->temp1[nr]);
504         mutex_unlock(&data->update_lock);
505
506         return count;
507 }
508
509 /* read/write the temperature2-3, includes measured value and limits */
510
511 static ssize_t show_temp23(struct device *dev, struct device_attribute *attr,
512                                 char *buf)
513 {
514         struct sensor_device_attribute_2 *sensor_attr = to_sensor_dev_attr_2(attr);
515         int nr = sensor_attr->nr;
516         int index = sensor_attr->index;
517         struct w83792d_data *data = w83792d_update_device(dev);
518         return sprintf(buf,"%ld\n",
519                 (long)TEMP_ADD_FROM_REG(data->temp_add[nr][index],
520                         data->temp_add[nr][index+1]));
521 }
522
523 static ssize_t store_temp23(struct device *dev, struct device_attribute *attr,
524                                 const char *buf, size_t count)
525 {
526         struct sensor_device_attribute_2 *sensor_attr = to_sensor_dev_attr_2(attr);
527         int nr = sensor_attr->nr;
528         int index = sensor_attr->index;
529         struct i2c_client *client = to_i2c_client(dev);
530         struct w83792d_data *data = i2c_get_clientdata(client);
531         s32 val;
532
533         val = simple_strtol(buf, NULL, 10);
534         mutex_lock(&data->update_lock);
535         data->temp_add[nr][index] = TEMP_ADD_TO_REG_HIGH(val);
536         data->temp_add[nr][index+1] = TEMP_ADD_TO_REG_LOW(val);
537         w83792d_write_value(client, W83792D_REG_TEMP_ADD[nr][index],
538                 data->temp_add[nr][index]);
539         w83792d_write_value(client, W83792D_REG_TEMP_ADD[nr][index+1],
540                 data->temp_add[nr][index+1]);
541         mutex_unlock(&data->update_lock);
542
543         return count;
544 }
545
546 /* get reatime status of all sensors items: voltage, temp, fan */
547 static ssize_t
548 show_alarms_reg(struct device *dev, struct device_attribute *attr, char *buf)
549 {
550         struct w83792d_data *data = w83792d_update_device(dev);
551         return sprintf(buf, "%d\n", data->alarms);
552 }
553
554 static ssize_t show_alarm(struct device *dev,
555                           struct device_attribute *attr, char *buf)
556 {
557         struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr);
558         int nr = sensor_attr->index;
559         struct w83792d_data *data = w83792d_update_device(dev);
560         return sprintf(buf, "%d\n", (data->alarms >> nr) & 1);
561 }
562
563 static ssize_t
564 show_pwm(struct device *dev, struct device_attribute *attr,
565                 char *buf)
566 {
567         struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr);
568         int nr = sensor_attr->index;
569         struct w83792d_data *data = w83792d_update_device(dev);
570         return sprintf(buf, "%d\n", (data->pwm[nr] & 0x0f) << 4);
571 }
572
573 static ssize_t
574 show_pwmenable(struct device *dev, struct device_attribute *attr,
575                         char *buf)
576 {
577         struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr);
578         int nr = sensor_attr->index - 1;
579         struct w83792d_data *data = w83792d_update_device(dev);
580         long pwm_enable_tmp = 1;
581
582         switch (data->pwmenable[nr]) {
583         case 0:
584                 pwm_enable_tmp = 1; /* manual mode */
585                 break;
586         case 1:
587                 pwm_enable_tmp = 3; /*thermal cruise/Smart Fan I */
588                 break;
589         case 2:
590                 pwm_enable_tmp = 2; /* Smart Fan II */
591                 break;
592         }
593
594         return sprintf(buf, "%ld\n", pwm_enable_tmp);
595 }
596
597 static ssize_t
598 store_pwm(struct device *dev, struct device_attribute *attr,
599                 const char *buf, size_t count)
600 {
601         struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr);
602         int nr = sensor_attr->index;
603         struct i2c_client *client = to_i2c_client(dev);
604         struct w83792d_data *data = i2c_get_clientdata(client);
605         u8 val = SENSORS_LIMIT(simple_strtoul(buf, NULL, 10), 0, 255) >> 4;
606
607         mutex_lock(&data->update_lock);
608         val |= w83792d_read_value(client, W83792D_REG_PWM[nr]) & 0xf0;
609         data->pwm[nr] = val;
610         w83792d_write_value(client, W83792D_REG_PWM[nr], data->pwm[nr]);
611         mutex_unlock(&data->update_lock);
612
613         return count;
614 }
615
616 static ssize_t
617 store_pwmenable(struct device *dev, struct device_attribute *attr,
618                         const char *buf, size_t count)
619 {
620         struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr);
621         int nr = sensor_attr->index - 1;
622         struct i2c_client *client = to_i2c_client(dev);
623         struct w83792d_data *data = i2c_get_clientdata(client);
624         u32 val;
625         u8 fan_cfg_tmp, cfg1_tmp, cfg2_tmp, cfg3_tmp, cfg4_tmp;
626
627         val = simple_strtoul(buf, NULL, 10);
628         if (val < 1 || val > 3)
629                 return -EINVAL;
630
631         mutex_lock(&data->update_lock);
632         switch (val) {
633         case 1:
634                 data->pwmenable[nr] = 0; /* manual mode */
635                 break;
636         case 2:
637                 data->pwmenable[nr] = 2; /* Smart Fan II */
638                 break;
639         case 3:
640                 data->pwmenable[nr] = 1; /* thermal cruise/Smart Fan I */
641                 break;
642         }
643         cfg1_tmp = data->pwmenable[0];
644         cfg2_tmp = (data->pwmenable[1]) << 2;
645         cfg3_tmp = (data->pwmenable[2]) << 4;
646         cfg4_tmp = w83792d_read_value(client,W83792D_REG_FAN_CFG) & 0xc0;
647         fan_cfg_tmp = ((cfg4_tmp | cfg3_tmp) | cfg2_tmp) | cfg1_tmp;
648         w83792d_write_value(client, W83792D_REG_FAN_CFG, fan_cfg_tmp);
649         mutex_unlock(&data->update_lock);
650
651         return count;
652 }
653
654 static ssize_t
655 show_pwm_mode(struct device *dev, struct device_attribute *attr,
656                         char *buf)
657 {
658         struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr);
659         int nr = sensor_attr->index;
660         struct w83792d_data *data = w83792d_update_device(dev);
661         return sprintf(buf, "%d\n", data->pwm[nr] >> 7);
662 }
663
664 static ssize_t
665 store_pwm_mode(struct device *dev, struct device_attribute *attr,
666                         const char *buf, size_t count)
667 {
668         struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr);
669         int nr = sensor_attr->index;
670         struct i2c_client *client = to_i2c_client(dev);
671         struct w83792d_data *data = i2c_get_clientdata(client);
672         u32 val;
673
674         val = simple_strtoul(buf, NULL, 10);
675         if (val != 0 && val != 1)
676                 return -EINVAL;
677
678         mutex_lock(&data->update_lock);
679         data->pwm[nr] = w83792d_read_value(client, W83792D_REG_PWM[nr]);
680         if (val) {                      /* PWM mode */
681                 data->pwm[nr] |= 0x80;
682         } else {                        /* DC mode */
683                 data->pwm[nr] &= 0x7f;
684         }
685         w83792d_write_value(client, W83792D_REG_PWM[nr], data->pwm[nr]);
686         mutex_unlock(&data->update_lock);
687
688         return count;
689 }
690
691 static ssize_t
692 show_regs_chassis(struct device *dev, struct device_attribute *attr,
693                         char *buf)
694 {
695         struct w83792d_data *data = w83792d_update_device(dev);
696         return sprintf(buf, "%d\n", data->chassis);
697 }
698
699 static ssize_t
700 show_chassis_clear(struct device *dev, struct device_attribute *attr, char *buf)
701 {
702         struct w83792d_data *data = w83792d_update_device(dev);
703         return sprintf(buf, "%d\n", data->chassis_clear);
704 }
705
706 static ssize_t
707 store_chassis_clear(struct device *dev, struct device_attribute *attr,
708                         const char *buf, size_t count)
709 {
710         struct i2c_client *client = to_i2c_client(dev);
711         struct w83792d_data *data = i2c_get_clientdata(client);
712         u32 val;
713         u8 temp1 = 0, temp2 = 0;
714
715         val = simple_strtoul(buf, NULL, 10);
716         mutex_lock(&data->update_lock);
717         data->chassis_clear = SENSORS_LIMIT(val, 0 ,1);
718         temp1 = ((data->chassis_clear) << 7) & 0x80;
719         temp2 = w83792d_read_value(client,
720                 W83792D_REG_CHASSIS_CLR) & 0x7f;
721         w83792d_write_value(client, W83792D_REG_CHASSIS_CLR, temp1 | temp2);
722         mutex_unlock(&data->update_lock);
723
724         return count;
725 }
726
727 /* For Smart Fan I / Thermal Cruise */
728 static ssize_t
729 show_thermal_cruise(struct device *dev, struct device_attribute *attr,
730                         char *buf)
731 {
732         struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr);
733         int nr = sensor_attr->index;
734         struct w83792d_data *data = w83792d_update_device(dev);
735         return sprintf(buf, "%ld\n", (long)data->thermal_cruise[nr-1]);
736 }
737
738 static ssize_t
739 store_thermal_cruise(struct device *dev, struct device_attribute *attr,
740                         const char *buf, size_t count)
741 {
742         struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr);
743         int nr = sensor_attr->index - 1;
744         struct i2c_client *client = to_i2c_client(dev);
745         struct w83792d_data *data = i2c_get_clientdata(client);
746         u32 val;
747         u8 target_tmp=0, target_mask=0;
748
749         val = simple_strtoul(buf, NULL, 10);
750         target_tmp = val;
751         target_tmp = target_tmp & 0x7f;
752         mutex_lock(&data->update_lock);
753         target_mask = w83792d_read_value(client, W83792D_REG_THERMAL[nr]) & 0x80;
754         data->thermal_cruise[nr] = SENSORS_LIMIT(target_tmp, 0, 255);
755         w83792d_write_value(client, W83792D_REG_THERMAL[nr],
756                 (data->thermal_cruise[nr]) | target_mask);
757         mutex_unlock(&data->update_lock);
758
759         return count;
760 }
761
762 /* For Smart Fan I/Thermal Cruise and Smart Fan II */
763 static ssize_t
764 show_tolerance(struct device *dev, struct device_attribute *attr,
765                 char *buf)
766 {
767         struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr);
768         int nr = sensor_attr->index;
769         struct w83792d_data *data = w83792d_update_device(dev);
770         return sprintf(buf, "%ld\n", (long)data->tolerance[nr-1]);
771 }
772
773 static ssize_t
774 store_tolerance(struct device *dev, struct device_attribute *attr,
775                 const char *buf, size_t count)
776 {
777         struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr);
778         int nr = sensor_attr->index - 1;
779         struct i2c_client *client = to_i2c_client(dev);
780         struct w83792d_data *data = i2c_get_clientdata(client);
781         u32 val;
782         u8 tol_tmp, tol_mask;
783
784         val = simple_strtoul(buf, NULL, 10);
785         mutex_lock(&data->update_lock);
786         tol_mask = w83792d_read_value(client,
787                 W83792D_REG_TOLERANCE[nr]) & ((nr == 1) ? 0x0f : 0xf0);
788         tol_tmp = SENSORS_LIMIT(val, 0, 15);
789         tol_tmp &= 0x0f;
790         data->tolerance[nr] = tol_tmp;
791         if (nr == 1) {
792                 tol_tmp <<= 4;
793         }
794         w83792d_write_value(client, W83792D_REG_TOLERANCE[nr],
795                 tol_mask | tol_tmp);
796         mutex_unlock(&data->update_lock);
797
798         return count;
799 }
800
801 /* For Smart Fan II */
802 static ssize_t
803 show_sf2_point(struct device *dev, struct device_attribute *attr,
804                 char *buf)
805 {
806         struct sensor_device_attribute_2 *sensor_attr = to_sensor_dev_attr_2(attr);
807         int nr = sensor_attr->nr;
808         int index = sensor_attr->index;
809         struct w83792d_data *data = w83792d_update_device(dev);
810         return sprintf(buf, "%ld\n", (long)data->sf2_points[index-1][nr-1]);
811 }
812
813 static ssize_t
814 store_sf2_point(struct device *dev, struct device_attribute *attr,
815                 const char *buf, size_t count)
816 {
817         struct sensor_device_attribute_2 *sensor_attr = to_sensor_dev_attr_2(attr);
818         int nr = sensor_attr->nr - 1;
819         int index = sensor_attr->index - 1;
820         struct i2c_client *client = to_i2c_client(dev);
821         struct w83792d_data *data = i2c_get_clientdata(client);
822         u32 val;
823         u8 mask_tmp = 0;
824
825         val = simple_strtoul(buf, NULL, 10);
826         mutex_lock(&data->update_lock);
827         data->sf2_points[index][nr] = SENSORS_LIMIT(val, 0, 127);
828         mask_tmp = w83792d_read_value(client,
829                                         W83792D_REG_POINTS[index][nr]) & 0x80;
830         w83792d_write_value(client, W83792D_REG_POINTS[index][nr],
831                 mask_tmp|data->sf2_points[index][nr]);
832         mutex_unlock(&data->update_lock);
833
834         return count;
835 }
836
837 static ssize_t
838 show_sf2_level(struct device *dev, struct device_attribute *attr,
839                 char *buf)
840 {
841         struct sensor_device_attribute_2 *sensor_attr = to_sensor_dev_attr_2(attr);
842         int nr = sensor_attr->nr;
843         int index = sensor_attr->index;
844         struct w83792d_data *data = w83792d_update_device(dev);
845         return sprintf(buf, "%d\n",
846                         (((data->sf2_levels[index-1][nr]) * 100) / 15));
847 }
848
849 static ssize_t
850 store_sf2_level(struct device *dev, struct device_attribute *attr,
851                 const char *buf, size_t count)
852 {
853         struct sensor_device_attribute_2 *sensor_attr = to_sensor_dev_attr_2(attr);
854         int nr = sensor_attr->nr;
855         int index = sensor_attr->index - 1;
856         struct i2c_client *client = to_i2c_client(dev);
857         struct w83792d_data *data = i2c_get_clientdata(client);
858         u32 val;
859         u8 mask_tmp=0, level_tmp=0;
860
861         val = simple_strtoul(buf, NULL, 10);
862         mutex_lock(&data->update_lock);
863         data->sf2_levels[index][nr] = SENSORS_LIMIT((val * 15) / 100, 0, 15);
864         mask_tmp = w83792d_read_value(client, W83792D_REG_LEVELS[index][nr])
865                 & ((nr==3) ? 0xf0 : 0x0f);
866         if (nr==3) {
867                 level_tmp = data->sf2_levels[index][nr];
868         } else {
869                 level_tmp = data->sf2_levels[index][nr] << 4;
870         }
871         w83792d_write_value(client, W83792D_REG_LEVELS[index][nr], level_tmp | mask_tmp);
872         mutex_unlock(&data->update_lock);
873
874         return count;
875 }
876
877
878 static int
879 w83792d_detect_subclients(struct i2c_client *new_client)
880 {
881         int i, id, err;
882         int address = new_client->addr;
883         u8 val;
884         struct i2c_adapter *adapter = new_client->adapter;
885         struct w83792d_data *data = i2c_get_clientdata(new_client);
886
887         id = i2c_adapter_id(adapter);
888         if (force_subclients[0] == id && force_subclients[1] == address) {
889                 for (i = 2; i <= 3; i++) {
890                         if (force_subclients[i] < 0x48 ||
891                             force_subclients[i] > 0x4f) {
892                                 dev_err(&new_client->dev, "invalid subclient "
893                                         "address %d; must be 0x48-0x4f\n",
894                                         force_subclients[i]);
895                                 err = -ENODEV;
896                                 goto ERROR_SC_0;
897                         }
898                 }
899                 w83792d_write_value(new_client, W83792D_REG_I2C_SUBADDR,
900                                         (force_subclients[2] & 0x07) |
901                                         ((force_subclients[3] & 0x07) << 4));
902         }
903
904         val = w83792d_read_value(new_client, W83792D_REG_I2C_SUBADDR);
905         if (!(val & 0x08)) {
906                 data->lm75[0] = i2c_new_dummy(adapter, 0x48 + (val & 0x7));
907         }
908         if (!(val & 0x80)) {
909                 if ((data->lm75[0] != NULL) &&
910                         ((val & 0x7) == ((val >> 4) & 0x7))) {
911                         dev_err(&new_client->dev, "duplicate addresses 0x%x, "
912                                 "use force_subclient\n", data->lm75[0]->addr);
913                         err = -ENODEV;
914                         goto ERROR_SC_1;
915                 }
916                 data->lm75[1] = i2c_new_dummy(adapter,
917                                               0x48 + ((val >> 4) & 0x7));
918         }
919
920         return 0;
921
922 /* Undo inits in case of errors */
923
924 ERROR_SC_1:
925         if (data->lm75[0] != NULL)
926                 i2c_unregister_device(data->lm75[0]);
927 ERROR_SC_0:
928         return err;
929 }
930
931 static SENSOR_DEVICE_ATTR(in0_input, S_IRUGO, show_in, NULL, 0);
932 static SENSOR_DEVICE_ATTR(in1_input, S_IRUGO, show_in, NULL, 1);
933 static SENSOR_DEVICE_ATTR(in2_input, S_IRUGO, show_in, NULL, 2);
934 static SENSOR_DEVICE_ATTR(in3_input, S_IRUGO, show_in, NULL, 3);
935 static SENSOR_DEVICE_ATTR(in4_input, S_IRUGO, show_in, NULL, 4);
936 static SENSOR_DEVICE_ATTR(in5_input, S_IRUGO, show_in, NULL, 5);
937 static SENSOR_DEVICE_ATTR(in6_input, S_IRUGO, show_in, NULL, 6);
938 static SENSOR_DEVICE_ATTR(in7_input, S_IRUGO, show_in, NULL, 7);
939 static SENSOR_DEVICE_ATTR(in8_input, S_IRUGO, show_in, NULL, 8);
940 static SENSOR_DEVICE_ATTR(in0_min, S_IWUSR | S_IRUGO,
941                         show_in_min, store_in_min, 0);
942 static SENSOR_DEVICE_ATTR(in1_min, S_IWUSR | S_IRUGO,
943                         show_in_min, store_in_min, 1);
944 static SENSOR_DEVICE_ATTR(in2_min, S_IWUSR | S_IRUGO,
945                         show_in_min, store_in_min, 2);
946 static SENSOR_DEVICE_ATTR(in3_min, S_IWUSR | S_IRUGO,
947                         show_in_min, store_in_min, 3);
948 static SENSOR_DEVICE_ATTR(in4_min, S_IWUSR | S_IRUGO,
949                         show_in_min, store_in_min, 4);
950 static SENSOR_DEVICE_ATTR(in5_min, S_IWUSR | S_IRUGO,
951                         show_in_min, store_in_min, 5);
952 static SENSOR_DEVICE_ATTR(in6_min, S_IWUSR | S_IRUGO,
953                         show_in_min, store_in_min, 6);
954 static SENSOR_DEVICE_ATTR(in7_min, S_IWUSR | S_IRUGO,
955                         show_in_min, store_in_min, 7);
956 static SENSOR_DEVICE_ATTR(in8_min, S_IWUSR | S_IRUGO,
957                         show_in_min, store_in_min, 8);
958 static SENSOR_DEVICE_ATTR(in0_max, S_IWUSR | S_IRUGO,
959                         show_in_max, store_in_max, 0);
960 static SENSOR_DEVICE_ATTR(in1_max, S_IWUSR | S_IRUGO,
961                         show_in_max, store_in_max, 1);
962 static SENSOR_DEVICE_ATTR(in2_max, S_IWUSR | S_IRUGO,
963                         show_in_max, store_in_max, 2);
964 static SENSOR_DEVICE_ATTR(in3_max, S_IWUSR | S_IRUGO,
965                         show_in_max, store_in_max, 3);
966 static SENSOR_DEVICE_ATTR(in4_max, S_IWUSR | S_IRUGO,
967                         show_in_max, store_in_max, 4);
968 static SENSOR_DEVICE_ATTR(in5_max, S_IWUSR | S_IRUGO,
969                         show_in_max, store_in_max, 5);
970 static SENSOR_DEVICE_ATTR(in6_max, S_IWUSR | S_IRUGO,
971                         show_in_max, store_in_max, 6);
972 static SENSOR_DEVICE_ATTR(in7_max, S_IWUSR | S_IRUGO,
973                         show_in_max, store_in_max, 7);
974 static SENSOR_DEVICE_ATTR(in8_max, S_IWUSR | S_IRUGO,
975                         show_in_max, store_in_max, 8);
976 static SENSOR_DEVICE_ATTR_2(temp1_input, S_IRUGO, show_temp1, NULL, 0, 0);
977 static SENSOR_DEVICE_ATTR_2(temp2_input, S_IRUGO, show_temp23, NULL, 0, 0);
978 static SENSOR_DEVICE_ATTR_2(temp3_input, S_IRUGO, show_temp23, NULL, 1, 0);
979 static SENSOR_DEVICE_ATTR_2(temp1_max, S_IRUGO | S_IWUSR,
980                         show_temp1, store_temp1, 0, 1);
981 static SENSOR_DEVICE_ATTR_2(temp2_max, S_IRUGO | S_IWUSR, show_temp23,
982                         store_temp23, 0, 2);
983 static SENSOR_DEVICE_ATTR_2(temp3_max, S_IRUGO | S_IWUSR, show_temp23,
984                         store_temp23, 1, 2);
985 static SENSOR_DEVICE_ATTR_2(temp1_max_hyst, S_IRUGO | S_IWUSR,
986                         show_temp1, store_temp1, 0, 2);
987 static SENSOR_DEVICE_ATTR_2(temp2_max_hyst, S_IRUGO | S_IWUSR,
988                         show_temp23, store_temp23, 0, 4);
989 static SENSOR_DEVICE_ATTR_2(temp3_max_hyst, S_IRUGO | S_IWUSR,
990                         show_temp23, store_temp23, 1, 4);
991 static DEVICE_ATTR(alarms, S_IRUGO, show_alarms_reg, NULL);
992 static SENSOR_DEVICE_ATTR(in0_alarm, S_IRUGO, show_alarm, NULL, 0);
993 static SENSOR_DEVICE_ATTR(in1_alarm, S_IRUGO, show_alarm, NULL, 1);
994 static SENSOR_DEVICE_ATTR(temp1_alarm, S_IRUGO, show_alarm, NULL, 2);
995 static SENSOR_DEVICE_ATTR(temp2_alarm, S_IRUGO, show_alarm, NULL, 3);
996 static SENSOR_DEVICE_ATTR(temp3_alarm, S_IRUGO, show_alarm, NULL, 4);
997 static SENSOR_DEVICE_ATTR(fan1_alarm, S_IRUGO, show_alarm, NULL, 5);
998 static SENSOR_DEVICE_ATTR(fan2_alarm, S_IRUGO, show_alarm, NULL, 6);
999 static SENSOR_DEVICE_ATTR(fan3_alarm, S_IRUGO, show_alarm, NULL, 7);
1000 static SENSOR_DEVICE_ATTR(in2_alarm, S_IRUGO, show_alarm, NULL, 8);
1001 static SENSOR_DEVICE_ATTR(in3_alarm, S_IRUGO, show_alarm, NULL, 9);
1002 static SENSOR_DEVICE_ATTR(in4_alarm, S_IRUGO, show_alarm, NULL, 10);
1003 static SENSOR_DEVICE_ATTR(in5_alarm, S_IRUGO, show_alarm, NULL, 11);
1004 static SENSOR_DEVICE_ATTR(in6_alarm, S_IRUGO, show_alarm, NULL, 12);
1005 static SENSOR_DEVICE_ATTR(fan7_alarm, S_IRUGO, show_alarm, NULL, 15);
1006 static SENSOR_DEVICE_ATTR(in7_alarm, S_IRUGO, show_alarm, NULL, 19);
1007 static SENSOR_DEVICE_ATTR(in8_alarm, S_IRUGO, show_alarm, NULL, 20);
1008 static SENSOR_DEVICE_ATTR(fan4_alarm, S_IRUGO, show_alarm, NULL, 21);
1009 static SENSOR_DEVICE_ATTR(fan5_alarm, S_IRUGO, show_alarm, NULL, 22);
1010 static SENSOR_DEVICE_ATTR(fan6_alarm, S_IRUGO, show_alarm, NULL, 23);
1011 static DEVICE_ATTR(chassis, S_IRUGO, show_regs_chassis, NULL);
1012 static DEVICE_ATTR(chassis_clear, S_IRUGO | S_IWUSR,
1013                         show_chassis_clear, store_chassis_clear);
1014 static SENSOR_DEVICE_ATTR(pwm1, S_IWUSR | S_IRUGO, show_pwm, store_pwm, 0);
1015 static SENSOR_DEVICE_ATTR(pwm2, S_IWUSR | S_IRUGO, show_pwm, store_pwm, 1);
1016 static SENSOR_DEVICE_ATTR(pwm3, S_IWUSR | S_IRUGO, show_pwm, store_pwm, 2);
1017 static SENSOR_DEVICE_ATTR(pwm1_enable, S_IWUSR | S_IRUGO,
1018                         show_pwmenable, store_pwmenable, 1);
1019 static SENSOR_DEVICE_ATTR(pwm2_enable, S_IWUSR | S_IRUGO,
1020                         show_pwmenable, store_pwmenable, 2);
1021 static SENSOR_DEVICE_ATTR(pwm3_enable, S_IWUSR | S_IRUGO,
1022                         show_pwmenable, store_pwmenable, 3);
1023 static SENSOR_DEVICE_ATTR(pwm1_mode, S_IWUSR | S_IRUGO,
1024                         show_pwm_mode, store_pwm_mode, 0);
1025 static SENSOR_DEVICE_ATTR(pwm2_mode, S_IWUSR | S_IRUGO,
1026                         show_pwm_mode, store_pwm_mode, 1);
1027 static SENSOR_DEVICE_ATTR(pwm3_mode, S_IWUSR | S_IRUGO,
1028                         show_pwm_mode, store_pwm_mode, 2);
1029 static SENSOR_DEVICE_ATTR(tolerance1, S_IWUSR | S_IRUGO,
1030                         show_tolerance, store_tolerance, 1);
1031 static SENSOR_DEVICE_ATTR(tolerance2, S_IWUSR | S_IRUGO,
1032                         show_tolerance, store_tolerance, 2);
1033 static SENSOR_DEVICE_ATTR(tolerance3, S_IWUSR | S_IRUGO,
1034                         show_tolerance, store_tolerance, 3);
1035 static SENSOR_DEVICE_ATTR(thermal_cruise1, S_IWUSR | S_IRUGO,
1036                         show_thermal_cruise, store_thermal_cruise, 1);
1037 static SENSOR_DEVICE_ATTR(thermal_cruise2, S_IWUSR | S_IRUGO,
1038                         show_thermal_cruise, store_thermal_cruise, 2);
1039 static SENSOR_DEVICE_ATTR(thermal_cruise3, S_IWUSR | S_IRUGO,
1040                         show_thermal_cruise, store_thermal_cruise, 3);
1041 static SENSOR_DEVICE_ATTR_2(sf2_point1_fan1, S_IRUGO | S_IWUSR,
1042                         show_sf2_point, store_sf2_point, 1, 1);
1043 static SENSOR_DEVICE_ATTR_2(sf2_point2_fan1, S_IRUGO | S_IWUSR,
1044                         show_sf2_point, store_sf2_point, 2, 1);
1045 static SENSOR_DEVICE_ATTR_2(sf2_point3_fan1, S_IRUGO | S_IWUSR,
1046                         show_sf2_point, store_sf2_point, 3, 1);
1047 static SENSOR_DEVICE_ATTR_2(sf2_point4_fan1, S_IRUGO | S_IWUSR,
1048                         show_sf2_point, store_sf2_point, 4, 1);
1049 static SENSOR_DEVICE_ATTR_2(sf2_point1_fan2, S_IRUGO | S_IWUSR,
1050                         show_sf2_point, store_sf2_point, 1, 2);
1051 static SENSOR_DEVICE_ATTR_2(sf2_point2_fan2, S_IRUGO | S_IWUSR,
1052                         show_sf2_point, store_sf2_point, 2, 2);
1053 static SENSOR_DEVICE_ATTR_2(sf2_point3_fan2, S_IRUGO | S_IWUSR,
1054                         show_sf2_point, store_sf2_point, 3, 2);
1055 static SENSOR_DEVICE_ATTR_2(sf2_point4_fan2, S_IRUGO | S_IWUSR,
1056                         show_sf2_point, store_sf2_point, 4, 2);
1057 static SENSOR_DEVICE_ATTR_2(sf2_point1_fan3, S_IRUGO | S_IWUSR,
1058                         show_sf2_point, store_sf2_point, 1, 3);
1059 static SENSOR_DEVICE_ATTR_2(sf2_point2_fan3, S_IRUGO | S_IWUSR,
1060                         show_sf2_point, store_sf2_point, 2, 3);
1061 static SENSOR_DEVICE_ATTR_2(sf2_point3_fan3, S_IRUGO | S_IWUSR,
1062                         show_sf2_point, store_sf2_point, 3, 3);
1063 static SENSOR_DEVICE_ATTR_2(sf2_point4_fan3, S_IRUGO | S_IWUSR,
1064                         show_sf2_point, store_sf2_point, 4, 3);
1065 static SENSOR_DEVICE_ATTR_2(sf2_level1_fan1, S_IRUGO | S_IWUSR,
1066                         show_sf2_level, store_sf2_level, 1, 1);
1067 static SENSOR_DEVICE_ATTR_2(sf2_level2_fan1, S_IRUGO | S_IWUSR,
1068                         show_sf2_level, store_sf2_level, 2, 1);
1069 static SENSOR_DEVICE_ATTR_2(sf2_level3_fan1, S_IRUGO | S_IWUSR,
1070                         show_sf2_level, store_sf2_level, 3, 1);
1071 static SENSOR_DEVICE_ATTR_2(sf2_level1_fan2, S_IRUGO | S_IWUSR,
1072                         show_sf2_level, store_sf2_level, 1, 2);
1073 static SENSOR_DEVICE_ATTR_2(sf2_level2_fan2, S_IRUGO | S_IWUSR,
1074                         show_sf2_level, store_sf2_level, 2, 2);
1075 static SENSOR_DEVICE_ATTR_2(sf2_level3_fan2, S_IRUGO | S_IWUSR,
1076                         show_sf2_level, store_sf2_level, 3, 2);
1077 static SENSOR_DEVICE_ATTR_2(sf2_level1_fan3, S_IRUGO | S_IWUSR,
1078                         show_sf2_level, store_sf2_level, 1, 3);
1079 static SENSOR_DEVICE_ATTR_2(sf2_level2_fan3, S_IRUGO | S_IWUSR,
1080                         show_sf2_level, store_sf2_level, 2, 3);
1081 static SENSOR_DEVICE_ATTR_2(sf2_level3_fan3, S_IRUGO | S_IWUSR,
1082                         show_sf2_level, store_sf2_level, 3, 3);
1083 static SENSOR_DEVICE_ATTR(fan1_input, S_IRUGO, show_fan, NULL, 1);
1084 static SENSOR_DEVICE_ATTR(fan2_input, S_IRUGO, show_fan, NULL, 2);
1085 static SENSOR_DEVICE_ATTR(fan3_input, S_IRUGO, show_fan, NULL, 3);
1086 static SENSOR_DEVICE_ATTR(fan4_input, S_IRUGO, show_fan, NULL, 4);
1087 static SENSOR_DEVICE_ATTR(fan5_input, S_IRUGO, show_fan, NULL, 5);
1088 static SENSOR_DEVICE_ATTR(fan6_input, S_IRUGO, show_fan, NULL, 6);
1089 static SENSOR_DEVICE_ATTR(fan7_input, S_IRUGO, show_fan, NULL, 7);
1090 static SENSOR_DEVICE_ATTR(fan1_min, S_IWUSR | S_IRUGO,
1091                         show_fan_min, store_fan_min, 1);
1092 static SENSOR_DEVICE_ATTR(fan2_min, S_IWUSR | S_IRUGO,
1093                         show_fan_min, store_fan_min, 2);
1094 static SENSOR_DEVICE_ATTR(fan3_min, S_IWUSR | S_IRUGO,
1095                         show_fan_min, store_fan_min, 3);
1096 static SENSOR_DEVICE_ATTR(fan4_min, S_IWUSR | S_IRUGO,
1097                         show_fan_min, store_fan_min, 4);
1098 static SENSOR_DEVICE_ATTR(fan5_min, S_IWUSR | S_IRUGO,
1099                         show_fan_min, store_fan_min, 5);
1100 static SENSOR_DEVICE_ATTR(fan6_min, S_IWUSR | S_IRUGO,
1101                         show_fan_min, store_fan_min, 6);
1102 static SENSOR_DEVICE_ATTR(fan7_min, S_IWUSR | S_IRUGO,
1103                         show_fan_min, store_fan_min, 7);
1104 static SENSOR_DEVICE_ATTR(fan1_div, S_IWUSR | S_IRUGO,
1105                         show_fan_div, store_fan_div, 1);
1106 static SENSOR_DEVICE_ATTR(fan2_div, S_IWUSR | S_IRUGO,
1107                         show_fan_div, store_fan_div, 2);
1108 static SENSOR_DEVICE_ATTR(fan3_div, S_IWUSR | S_IRUGO,
1109                         show_fan_div, store_fan_div, 3);
1110 static SENSOR_DEVICE_ATTR(fan4_div, S_IWUSR | S_IRUGO,
1111                         show_fan_div, store_fan_div, 4);
1112 static SENSOR_DEVICE_ATTR(fan5_div, S_IWUSR | S_IRUGO,
1113                         show_fan_div, store_fan_div, 5);
1114 static SENSOR_DEVICE_ATTR(fan6_div, S_IWUSR | S_IRUGO,
1115                         show_fan_div, store_fan_div, 6);
1116 static SENSOR_DEVICE_ATTR(fan7_div, S_IWUSR | S_IRUGO,
1117                         show_fan_div, store_fan_div, 7);
1118
1119 static struct attribute *w83792d_attributes_fan[4][5] = {
1120         {
1121                 &sensor_dev_attr_fan4_input.dev_attr.attr,
1122                 &sensor_dev_attr_fan4_min.dev_attr.attr,
1123                 &sensor_dev_attr_fan4_div.dev_attr.attr,
1124                 &sensor_dev_attr_fan4_alarm.dev_attr.attr,
1125                 NULL
1126         }, {
1127                 &sensor_dev_attr_fan5_input.dev_attr.attr,
1128                 &sensor_dev_attr_fan5_min.dev_attr.attr,
1129                 &sensor_dev_attr_fan5_div.dev_attr.attr,
1130                 &sensor_dev_attr_fan5_alarm.dev_attr.attr,
1131                 NULL
1132         }, {
1133                 &sensor_dev_attr_fan6_input.dev_attr.attr,
1134                 &sensor_dev_attr_fan6_min.dev_attr.attr,
1135                 &sensor_dev_attr_fan6_div.dev_attr.attr,
1136                 &sensor_dev_attr_fan6_alarm.dev_attr.attr,
1137                 NULL
1138         }, {
1139                 &sensor_dev_attr_fan7_input.dev_attr.attr,
1140                 &sensor_dev_attr_fan7_min.dev_attr.attr,
1141                 &sensor_dev_attr_fan7_div.dev_attr.attr,
1142                 &sensor_dev_attr_fan7_alarm.dev_attr.attr,
1143                 NULL
1144         }
1145 };
1146
1147 static const struct attribute_group w83792d_group_fan[4] = {
1148         { .attrs = w83792d_attributes_fan[0] },
1149         { .attrs = w83792d_attributes_fan[1] },
1150         { .attrs = w83792d_attributes_fan[2] },
1151         { .attrs = w83792d_attributes_fan[3] },
1152 };
1153
1154 static struct attribute *w83792d_attributes[] = {
1155         &sensor_dev_attr_in0_input.dev_attr.attr,
1156         &sensor_dev_attr_in0_max.dev_attr.attr,
1157         &sensor_dev_attr_in0_min.dev_attr.attr,
1158         &sensor_dev_attr_in1_input.dev_attr.attr,
1159         &sensor_dev_attr_in1_max.dev_attr.attr,
1160         &sensor_dev_attr_in1_min.dev_attr.attr,
1161         &sensor_dev_attr_in2_input.dev_attr.attr,
1162         &sensor_dev_attr_in2_max.dev_attr.attr,
1163         &sensor_dev_attr_in2_min.dev_attr.attr,
1164         &sensor_dev_attr_in3_input.dev_attr.attr,
1165         &sensor_dev_attr_in3_max.dev_attr.attr,
1166         &sensor_dev_attr_in3_min.dev_attr.attr,
1167         &sensor_dev_attr_in4_input.dev_attr.attr,
1168         &sensor_dev_attr_in4_max.dev_attr.attr,
1169         &sensor_dev_attr_in4_min.dev_attr.attr,
1170         &sensor_dev_attr_in5_input.dev_attr.attr,
1171         &sensor_dev_attr_in5_max.dev_attr.attr,
1172         &sensor_dev_attr_in5_min.dev_attr.attr,
1173         &sensor_dev_attr_in6_input.dev_attr.attr,
1174         &sensor_dev_attr_in6_max.dev_attr.attr,
1175         &sensor_dev_attr_in6_min.dev_attr.attr,
1176         &sensor_dev_attr_in7_input.dev_attr.attr,
1177         &sensor_dev_attr_in7_max.dev_attr.attr,
1178         &sensor_dev_attr_in7_min.dev_attr.attr,
1179         &sensor_dev_attr_in8_input.dev_attr.attr,
1180         &sensor_dev_attr_in8_max.dev_attr.attr,
1181         &sensor_dev_attr_in8_min.dev_attr.attr,
1182         &sensor_dev_attr_in0_alarm.dev_attr.attr,
1183         &sensor_dev_attr_in1_alarm.dev_attr.attr,
1184         &sensor_dev_attr_in2_alarm.dev_attr.attr,
1185         &sensor_dev_attr_in3_alarm.dev_attr.attr,
1186         &sensor_dev_attr_in4_alarm.dev_attr.attr,
1187         &sensor_dev_attr_in5_alarm.dev_attr.attr,
1188         &sensor_dev_attr_in6_alarm.dev_attr.attr,
1189         &sensor_dev_attr_in7_alarm.dev_attr.attr,
1190         &sensor_dev_attr_in8_alarm.dev_attr.attr,
1191         &sensor_dev_attr_temp1_input.dev_attr.attr,
1192         &sensor_dev_attr_temp1_max.dev_attr.attr,
1193         &sensor_dev_attr_temp1_max_hyst.dev_attr.attr,
1194         &sensor_dev_attr_temp2_input.dev_attr.attr,
1195         &sensor_dev_attr_temp2_max.dev_attr.attr,
1196         &sensor_dev_attr_temp2_max_hyst.dev_attr.attr,
1197         &sensor_dev_attr_temp3_input.dev_attr.attr,
1198         &sensor_dev_attr_temp3_max.dev_attr.attr,
1199         &sensor_dev_attr_temp3_max_hyst.dev_attr.attr,
1200         &sensor_dev_attr_temp1_alarm.dev_attr.attr,
1201         &sensor_dev_attr_temp2_alarm.dev_attr.attr,
1202         &sensor_dev_attr_temp3_alarm.dev_attr.attr,
1203         &sensor_dev_attr_pwm1.dev_attr.attr,
1204         &sensor_dev_attr_pwm1_mode.dev_attr.attr,
1205         &sensor_dev_attr_pwm1_enable.dev_attr.attr,
1206         &sensor_dev_attr_pwm2.dev_attr.attr,
1207         &sensor_dev_attr_pwm2_mode.dev_attr.attr,
1208         &sensor_dev_attr_pwm2_enable.dev_attr.attr,
1209         &sensor_dev_attr_pwm3.dev_attr.attr,
1210         &sensor_dev_attr_pwm3_mode.dev_attr.attr,
1211         &sensor_dev_attr_pwm3_enable.dev_attr.attr,
1212         &dev_attr_alarms.attr,
1213         &dev_attr_chassis.attr,
1214         &dev_attr_chassis_clear.attr,
1215         &sensor_dev_attr_tolerance1.dev_attr.attr,
1216         &sensor_dev_attr_thermal_cruise1.dev_attr.attr,
1217         &sensor_dev_attr_tolerance2.dev_attr.attr,
1218         &sensor_dev_attr_thermal_cruise2.dev_attr.attr,
1219         &sensor_dev_attr_tolerance3.dev_attr.attr,
1220         &sensor_dev_attr_thermal_cruise3.dev_attr.attr,
1221         &sensor_dev_attr_sf2_point1_fan1.dev_attr.attr,
1222         &sensor_dev_attr_sf2_point2_fan1.dev_attr.attr,
1223         &sensor_dev_attr_sf2_point3_fan1.dev_attr.attr,
1224         &sensor_dev_attr_sf2_point4_fan1.dev_attr.attr,
1225         &sensor_dev_attr_sf2_point1_fan2.dev_attr.attr,
1226         &sensor_dev_attr_sf2_point2_fan2.dev_attr.attr,
1227         &sensor_dev_attr_sf2_point3_fan2.dev_attr.attr,
1228         &sensor_dev_attr_sf2_point4_fan2.dev_attr.attr,
1229         &sensor_dev_attr_sf2_point1_fan3.dev_attr.attr,
1230         &sensor_dev_attr_sf2_point2_fan3.dev_attr.attr,
1231         &sensor_dev_attr_sf2_point3_fan3.dev_attr.attr,
1232         &sensor_dev_attr_sf2_point4_fan3.dev_attr.attr,
1233         &sensor_dev_attr_sf2_level1_fan1.dev_attr.attr,
1234         &sensor_dev_attr_sf2_level2_fan1.dev_attr.attr,
1235         &sensor_dev_attr_sf2_level3_fan1.dev_attr.attr,
1236         &sensor_dev_attr_sf2_level1_fan2.dev_attr.attr,
1237         &sensor_dev_attr_sf2_level2_fan2.dev_attr.attr,
1238         &sensor_dev_attr_sf2_level3_fan2.dev_attr.attr,
1239         &sensor_dev_attr_sf2_level1_fan3.dev_attr.attr,
1240         &sensor_dev_attr_sf2_level2_fan3.dev_attr.attr,
1241         &sensor_dev_attr_sf2_level3_fan3.dev_attr.attr,
1242         &sensor_dev_attr_fan1_input.dev_attr.attr,
1243         &sensor_dev_attr_fan1_min.dev_attr.attr,
1244         &sensor_dev_attr_fan1_div.dev_attr.attr,
1245         &sensor_dev_attr_fan1_alarm.dev_attr.attr,
1246         &sensor_dev_attr_fan2_input.dev_attr.attr,
1247         &sensor_dev_attr_fan2_min.dev_attr.attr,
1248         &sensor_dev_attr_fan2_div.dev_attr.attr,
1249         &sensor_dev_attr_fan2_alarm.dev_attr.attr,
1250         &sensor_dev_attr_fan3_input.dev_attr.attr,
1251         &sensor_dev_attr_fan3_min.dev_attr.attr,
1252         &sensor_dev_attr_fan3_div.dev_attr.attr,
1253         &sensor_dev_attr_fan3_alarm.dev_attr.attr,
1254         NULL
1255 };
1256
1257 static const struct attribute_group w83792d_group = {
1258         .attrs = w83792d_attributes,
1259 };
1260
1261 /* Return 0 if detection is successful, -ENODEV otherwise */
1262 static int
1263 w83792d_detect(struct i2c_client *client, int kind, struct i2c_board_info *info)
1264 {
1265         struct i2c_adapter *adapter = client->adapter;
1266         int val1, val2;
1267         unsigned short address = client->addr;
1268
1269         if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA)) {
1270                 return -ENODEV;
1271         }
1272
1273         /* The w83792d may be stuck in some other bank than bank 0. This may
1274            make reading other information impossible. Specify a force=... or
1275            force_*=... parameter, and the Winbond will be reset to the right
1276            bank. */
1277         if (kind < 0) {
1278                 if (w83792d_read_value(client, W83792D_REG_CONFIG) & 0x80) {
1279                         return -ENODEV;
1280                 }
1281                 val1 = w83792d_read_value(client, W83792D_REG_BANK);
1282                 val2 = w83792d_read_value(client, W83792D_REG_CHIPMAN);
1283                 /* Check for Winbond ID if in bank 0 */
1284                 if (!(val1 & 0x07)) {  /* is Bank0 */
1285                         if (((!(val1 & 0x80)) && (val2 != 0xa3)) ||
1286                              ((val1 & 0x80) && (val2 != 0x5c))) {
1287                                 return -ENODEV;
1288                         }
1289                 }
1290                 /* If Winbond chip, address of chip and W83792D_REG_I2C_ADDR
1291                    should match */
1292                 if (w83792d_read_value(client,
1293                                         W83792D_REG_I2C_ADDR) != address) {
1294                         return -ENODEV;
1295                 }
1296         }
1297
1298         /* We have either had a force parameter, or we have already detected the
1299            Winbond. Put it now into bank 0 and Vendor ID High Byte */
1300         w83792d_write_value(client,
1301                             W83792D_REG_BANK,
1302                             (w83792d_read_value(client,
1303                                 W83792D_REG_BANK) & 0x78) | 0x80);
1304
1305         /* Determine the chip type. */
1306         if (kind <= 0) {
1307                 /* get vendor ID */
1308                 val2 = w83792d_read_value(client, W83792D_REG_CHIPMAN);
1309                 if (val2 != 0x5c) {  /* the vendor is NOT Winbond */
1310                         return -ENODEV;
1311                 }
1312                 val1 = w83792d_read_value(client, W83792D_REG_WCHIPID);
1313                 if (val1 == 0x7a) {
1314                         kind = w83792d;
1315                 } else {
1316                         if (kind == 0)
1317                                 dev_warn(&adapter->dev,
1318                                         "w83792d: Ignoring 'force' parameter for"
1319                                         " unknown chip at adapter %d, address"
1320                                         " 0x%02x\n", i2c_adapter_id(adapter),
1321                                         address);
1322                         return -ENODEV;
1323                 }
1324         }
1325
1326         strlcpy(info->type, "w83792d", I2C_NAME_SIZE);
1327
1328         return 0;
1329 }
1330
1331 static int
1332 w83792d_probe(struct i2c_client *client, const struct i2c_device_id *id)
1333 {
1334         struct w83792d_data *data;
1335         struct device *dev = &client->dev;
1336         int i, val1, err;
1337
1338         data = kzalloc(sizeof(struct w83792d_data), GFP_KERNEL);
1339         if (!data) {
1340                 err = -ENOMEM;
1341                 goto ERROR0;
1342         }
1343
1344         i2c_set_clientdata(client, data);
1345         data->valid = 0;
1346         mutex_init(&data->update_lock);
1347
1348         err = w83792d_detect_subclients(client);
1349         if (err)
1350                 goto ERROR1;
1351
1352         /* Initialize the chip */
1353         w83792d_init_client(client);
1354
1355         /* A few vars need to be filled upon startup */
1356         for (i = 0; i < 7; i++) {
1357                 data->fan_min[i] = w83792d_read_value(client,
1358                                         W83792D_REG_FAN_MIN[i]);
1359         }
1360
1361         /* Register sysfs hooks */
1362         if ((err = sysfs_create_group(&dev->kobj, &w83792d_group)))
1363                 goto ERROR3;
1364
1365         /* Read GPIO enable register to check if pins for fan 4,5 are used as
1366            GPIO */
1367         val1 = w83792d_read_value(client, W83792D_REG_GPIO_EN);
1368
1369         if (!(val1 & 0x40))
1370                 if ((err = sysfs_create_group(&dev->kobj,
1371                                               &w83792d_group_fan[0])))
1372                         goto exit_remove_files;
1373
1374         if (!(val1 & 0x20))
1375                 if ((err = sysfs_create_group(&dev->kobj,
1376                                               &w83792d_group_fan[1])))
1377                         goto exit_remove_files;
1378
1379         val1 = w83792d_read_value(client, W83792D_REG_PIN);
1380         if (val1 & 0x40)
1381                 if ((err = sysfs_create_group(&dev->kobj,
1382                                               &w83792d_group_fan[2])))
1383                         goto exit_remove_files;
1384
1385         if (val1 & 0x04)
1386                 if ((err = sysfs_create_group(&dev->kobj,
1387                                               &w83792d_group_fan[3])))
1388                         goto exit_remove_files;
1389
1390         data->hwmon_dev = hwmon_device_register(dev);
1391         if (IS_ERR(data->hwmon_dev)) {
1392                 err = PTR_ERR(data->hwmon_dev);
1393                 goto exit_remove_files;
1394         }
1395
1396         return 0;
1397
1398 exit_remove_files:
1399         sysfs_remove_group(&dev->kobj, &w83792d_group);
1400         for (i = 0; i < ARRAY_SIZE(w83792d_group_fan); i++)
1401                 sysfs_remove_group(&dev->kobj, &w83792d_group_fan[i]);
1402 ERROR3:
1403         if (data->lm75[0] != NULL)
1404                 i2c_unregister_device(data->lm75[0]);
1405         if (data->lm75[1] != NULL)
1406                 i2c_unregister_device(data->lm75[1]);
1407 ERROR1:
1408         kfree(data);
1409 ERROR0:
1410         return err;
1411 }
1412
1413 static int
1414 w83792d_remove(struct i2c_client *client)
1415 {
1416         struct w83792d_data *data = i2c_get_clientdata(client);
1417         int i;
1418
1419         hwmon_device_unregister(data->hwmon_dev);
1420         sysfs_remove_group(&client->dev.kobj, &w83792d_group);
1421         for (i = 0; i < ARRAY_SIZE(w83792d_group_fan); i++)
1422                 sysfs_remove_group(&client->dev.kobj,
1423                                    &w83792d_group_fan[i]);
1424
1425         if (data->lm75[0] != NULL)
1426                 i2c_unregister_device(data->lm75[0]);
1427         if (data->lm75[1] != NULL)
1428                 i2c_unregister_device(data->lm75[1]);
1429
1430         kfree(data);
1431         return 0;
1432 }
1433
1434 static void
1435 w83792d_init_client(struct i2c_client *client)
1436 {
1437         u8 temp2_cfg, temp3_cfg, vid_in_b;
1438
1439         if (init) {
1440                 w83792d_write_value(client, W83792D_REG_CONFIG, 0x80);
1441         }
1442         /* Clear the bit6 of W83792D_REG_VID_IN_B(set it into 0):
1443            W83792D_REG_VID_IN_B bit6 = 0: the high/low limit of
1444              vin0/vin1 can be modified by user;
1445            W83792D_REG_VID_IN_B bit6 = 1: the high/low limit of
1446              vin0/vin1 auto-updated, can NOT be modified by user. */
1447         vid_in_b = w83792d_read_value(client, W83792D_REG_VID_IN_B);
1448         w83792d_write_value(client, W83792D_REG_VID_IN_B,
1449                             vid_in_b & 0xbf);
1450
1451         temp2_cfg = w83792d_read_value(client, W83792D_REG_TEMP2_CONFIG);
1452         temp3_cfg = w83792d_read_value(client, W83792D_REG_TEMP3_CONFIG);
1453         w83792d_write_value(client, W83792D_REG_TEMP2_CONFIG,
1454                                 temp2_cfg & 0xe6);
1455         w83792d_write_value(client, W83792D_REG_TEMP3_CONFIG,
1456                                 temp3_cfg & 0xe6);
1457
1458         /* Start monitoring */
1459         w83792d_write_value(client, W83792D_REG_CONFIG,
1460                             (w83792d_read_value(client,
1461                                                 W83792D_REG_CONFIG) & 0xf7)
1462                             | 0x01);
1463 }
1464
1465 static struct w83792d_data *w83792d_update_device(struct device *dev)
1466 {
1467         struct i2c_client *client = to_i2c_client(dev);
1468         struct w83792d_data *data = i2c_get_clientdata(client);
1469         int i, j;
1470         u8 reg_array_tmp[4], reg_tmp;
1471
1472         mutex_lock(&data->update_lock);
1473
1474         if (time_after
1475             (jiffies - data->last_updated, (unsigned long) (HZ * 3))
1476             || time_before(jiffies, data->last_updated) || !data->valid) {
1477                 dev_dbg(dev, "Starting device update\n");
1478
1479                 /* Update the voltages measured value and limits */
1480                 for (i = 0; i < 9; i++) {
1481                         data->in[i] = w83792d_read_value(client,
1482                                                 W83792D_REG_IN[i]);
1483                         data->in_max[i] = w83792d_read_value(client,
1484                                                 W83792D_REG_IN_MAX[i]);
1485                         data->in_min[i] = w83792d_read_value(client,
1486                                                 W83792D_REG_IN_MIN[i]);
1487                 }
1488                 data->low_bits = w83792d_read_value(client,
1489                                                 W83792D_REG_LOW_BITS1) +
1490                                  (w83792d_read_value(client,
1491                                                 W83792D_REG_LOW_BITS2) << 8);
1492                 for (i = 0; i < 7; i++) {
1493                         /* Update the Fan measured value and limits */
1494                         data->fan[i] = w83792d_read_value(client,
1495                                                 W83792D_REG_FAN[i]);
1496                         data->fan_min[i] = w83792d_read_value(client,
1497                                                 W83792D_REG_FAN_MIN[i]);
1498                         /* Update the PWM/DC Value and PWM/DC flag */
1499                         data->pwm[i] = w83792d_read_value(client,
1500                                                 W83792D_REG_PWM[i]);
1501                 }
1502
1503                 reg_tmp = w83792d_read_value(client, W83792D_REG_FAN_CFG);
1504                 data->pwmenable[0] = reg_tmp & 0x03;
1505                 data->pwmenable[1] = (reg_tmp>>2) & 0x03;
1506                 data->pwmenable[2] = (reg_tmp>>4) & 0x03;
1507
1508                 for (i = 0; i < 3; i++) {
1509                         data->temp1[i] = w83792d_read_value(client,
1510                                                         W83792D_REG_TEMP1[i]);
1511                 }
1512                 for (i = 0; i < 2; i++) {
1513                         for (j = 0; j < 6; j++) {
1514                                 data->temp_add[i][j] = w83792d_read_value(
1515                                         client,W83792D_REG_TEMP_ADD[i][j]);
1516                         }
1517                 }
1518
1519                 /* Update the Fan Divisor */
1520                 for (i = 0; i < 4; i++) {
1521                         reg_array_tmp[i] = w83792d_read_value(client,
1522                                                         W83792D_REG_FAN_DIV[i]);
1523                 }
1524                 data->fan_div[0] = reg_array_tmp[0] & 0x07;
1525                 data->fan_div[1] = (reg_array_tmp[0] >> 4) & 0x07;
1526                 data->fan_div[2] = reg_array_tmp[1] & 0x07;
1527                 data->fan_div[3] = (reg_array_tmp[1] >> 4) & 0x07;
1528                 data->fan_div[4] = reg_array_tmp[2] & 0x07;
1529                 data->fan_div[5] = (reg_array_tmp[2] >> 4) & 0x07;
1530                 data->fan_div[6] = reg_array_tmp[3] & 0x07;
1531
1532                 /* Update the realtime status */
1533                 data->alarms = w83792d_read_value(client, W83792D_REG_ALARM1) +
1534                         (w83792d_read_value(client, W83792D_REG_ALARM2) << 8) +
1535                         (w83792d_read_value(client, W83792D_REG_ALARM3) << 16);
1536
1537                 /* Update CaseOpen status and it's CLR_CHS. */
1538                 data->chassis = (w83792d_read_value(client,
1539                         W83792D_REG_CHASSIS) >> 5) & 0x01;
1540                 data->chassis_clear = (w83792d_read_value(client,
1541                         W83792D_REG_CHASSIS_CLR) >> 7) & 0x01;
1542
1543                 /* Update Thermal Cruise/Smart Fan I target value */
1544                 for (i = 0; i < 3; i++) {
1545                         data->thermal_cruise[i] =
1546                                 w83792d_read_value(client,
1547                                 W83792D_REG_THERMAL[i]) & 0x7f;
1548                 }
1549
1550                 /* Update Smart Fan I/II tolerance */
1551                 reg_tmp = w83792d_read_value(client, W83792D_REG_TOLERANCE[0]);
1552                 data->tolerance[0] = reg_tmp & 0x0f;
1553                 data->tolerance[1] = (reg_tmp >> 4) & 0x0f;
1554                 data->tolerance[2] = w83792d_read_value(client,
1555                                         W83792D_REG_TOLERANCE[2]) & 0x0f;
1556
1557                 /* Update Smart Fan II temperature points */
1558                 for (i = 0; i < 3; i++) {
1559                         for (j = 0; j < 4; j++) {
1560                                 data->sf2_points[i][j] = w83792d_read_value(
1561                                         client,W83792D_REG_POINTS[i][j]) & 0x7f;
1562                         }
1563                 }
1564
1565                 /* Update Smart Fan II duty cycle levels */
1566                 for (i = 0; i < 3; i++) {
1567                         reg_tmp = w83792d_read_value(client,
1568                                                 W83792D_REG_LEVELS[i][0]);
1569                         data->sf2_levels[i][0] = reg_tmp & 0x0f;
1570                         data->sf2_levels[i][1] = (reg_tmp >> 4) & 0x0f;
1571                         reg_tmp = w83792d_read_value(client,
1572                                                 W83792D_REG_LEVELS[i][2]);
1573                         data->sf2_levels[i][2] = (reg_tmp >> 4) & 0x0f;
1574                         data->sf2_levels[i][3] = reg_tmp & 0x0f;
1575                 }
1576
1577                 data->last_updated = jiffies;
1578                 data->valid = 1;
1579         }
1580
1581         mutex_unlock(&data->update_lock);
1582
1583 #ifdef DEBUG
1584         w83792d_print_debug(data, dev);
1585 #endif
1586
1587         return data;
1588 }
1589
1590 #ifdef DEBUG
1591 static void w83792d_print_debug(struct w83792d_data *data, struct device *dev)
1592 {
1593         int i=0, j=0;
1594         dev_dbg(dev, "==========The following is the debug message...========\n");
1595         dev_dbg(dev, "9 set of Voltages: =====>\n");
1596         for (i=0; i<9; i++) {
1597                 dev_dbg(dev, "vin[%d] is: 0x%x\n", i, data->in[i]);
1598                 dev_dbg(dev, "vin[%d] max is: 0x%x\n", i, data->in_max[i]);
1599                 dev_dbg(dev, "vin[%d] min is: 0x%x\n", i, data->in_min[i]);
1600         }
1601         dev_dbg(dev, "Low Bit1 is: 0x%x\n", data->low_bits & 0xff);
1602         dev_dbg(dev, "Low Bit2 is: 0x%x\n", data->low_bits >> 8);
1603         dev_dbg(dev, "7 set of Fan Counts and Duty Cycles: =====>\n");
1604         for (i=0; i<7; i++) {
1605                 dev_dbg(dev, "fan[%d] is: 0x%x\n", i, data->fan[i]);
1606                 dev_dbg(dev, "fan[%d] min is: 0x%x\n", i, data->fan_min[i]);
1607                 dev_dbg(dev, "pwm[%d]     is: 0x%x\n", i, data->pwm[i]);
1608         }
1609         dev_dbg(dev, "3 set of Temperatures: =====>\n");
1610         for (i=0; i<3; i++) {
1611                 dev_dbg(dev, "temp1[%d] is: 0x%x\n", i, data->temp1[i]);
1612         }
1613
1614         for (i=0; i<2; i++) {
1615                 for (j=0; j<6; j++) {
1616                         dev_dbg(dev, "temp_add[%d][%d] is: 0x%x\n", i, j,
1617                                                         data->temp_add[i][j]);
1618                 }
1619         }
1620
1621         for (i=0; i<7; i++) {
1622                 dev_dbg(dev, "fan_div[%d] is: 0x%x\n", i, data->fan_div[i]);
1623         }
1624         dev_dbg(dev, "==========End of the debug message...==================\n");
1625         dev_dbg(dev, "\n");
1626 }
1627 #endif
1628
1629 static int __init
1630 sensors_w83792d_init(void)
1631 {
1632         return i2c_add_driver(&w83792d_driver);
1633 }
1634
1635 static void __exit
1636 sensors_w83792d_exit(void)
1637 {
1638         i2c_del_driver(&w83792d_driver);
1639 }
1640
1641 MODULE_AUTHOR("Chunhao Huang @ Winbond <DZShen@Winbond.com.tw>");
1642 MODULE_DESCRIPTION("W83792AD/D driver for linux-2.6");
1643 MODULE_LICENSE("GPL");
1644
1645 module_init(sensors_w83792d_init);
1646 module_exit(sensors_w83792d_exit);
1647