update from upstream
[linux-2.6] / drivers / acpi / utilities / utinit.c
1 /******************************************************************************
2  *
3  * Module Name: utinit - Common ACPI subsystem initialization
4  *
5  *****************************************************************************/
6
7 /*
8  * Copyright (C) 2000 - 2005, R. Byron Moore
9  * All rights reserved.
10  *
11  * Redistribution and use in source and binary forms, with or without
12  * modification, are permitted provided that the following conditions
13  * are met:
14  * 1. Redistributions of source code must retain the above copyright
15  *    notice, this list of conditions, and the following disclaimer,
16  *    without modification.
17  * 2. Redistributions in binary form must reproduce at minimum a disclaimer
18  *    substantially similar to the "NO WARRANTY" disclaimer below
19  *    ("Disclaimer") and any redistribution must be conditioned upon
20  *    including a substantially similar Disclaimer requirement for further
21  *    binary redistribution.
22  * 3. Neither the names of the above-listed copyright holders nor the names
23  *    of any contributors may be used to endorse or promote products derived
24  *    from this software without specific prior written permission.
25  *
26  * Alternatively, this software may be distributed under the terms of the
27  * GNU General Public License ("GPL") version 2 as published by the Free
28  * Software Foundation.
29  *
30  * NO WARRANTY
31  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
32  * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
33  * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
34  * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
35  * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
36  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
37  * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
38  * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
39  * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
40  * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
41  * POSSIBILITY OF SUCH DAMAGES.
42  */
43
44 #include <acpi/acpi.h>
45 #include <acpi/acnamesp.h>
46 #include <acpi/acevents.h>
47
48 #define _COMPONENT          ACPI_UTILITIES
49 ACPI_MODULE_NAME("utinit")
50
51 /* Local prototypes */
52 static void
53 acpi_ut_fadt_register_error(char *register_name, u32 value, acpi_size offset);
54
55 static void acpi_ut_terminate(void);
56
57 /*******************************************************************************
58  *
59  * FUNCTION:    acpi_ut_fadt_register_error
60  *
61  * PARAMETERS:  register_name           - Pointer to string identifying register
62  *              Value                   - Actual register contents value
63  *              Offset                  - Byte offset in the FADT
64  *
65  * RETURN:      AE_BAD_VALUE
66  *
67  * DESCRIPTION: Display failure message
68  *
69  ******************************************************************************/
70
71 static void
72 acpi_ut_fadt_register_error(char *register_name, u32 value, acpi_size offset)
73 {
74
75         ACPI_REPORT_WARNING(("Invalid FADT value %s=%X at offset %X FADT=%p\n",
76                              register_name, value, (u32) offset,
77                              acpi_gbl_FADT));
78 }
79
80 /******************************************************************************
81  *
82  * FUNCTION:    acpi_ut_validate_fadt
83  *
84  * PARAMETERS:  None
85  *
86  * RETURN:      Status
87  *
88  * DESCRIPTION: Validate various ACPI registers in the FADT
89  *
90  ******************************************************************************/
91
92 acpi_status acpi_ut_validate_fadt(void)
93 {
94
95         /*
96          * Verify Fixed ACPI Description Table fields,
97          * but don't abort on any problems, just display error
98          */
99         if (acpi_gbl_FADT->pm1_evt_len < 4) {
100                 acpi_ut_fadt_register_error("PM1_EVT_LEN",
101                                             (u32) acpi_gbl_FADT->pm1_evt_len,
102                                             ACPI_FADT_OFFSET(pm1_evt_len));
103         }
104
105         if (!acpi_gbl_FADT->pm1_cnt_len) {
106                 acpi_ut_fadt_register_error("PM1_CNT_LEN", 0,
107                                             ACPI_FADT_OFFSET(pm1_cnt_len));
108         }
109
110         if (!acpi_gbl_FADT->xpm1a_evt_blk.address) {
111                 acpi_ut_fadt_register_error("X_PM1a_EVT_BLK", 0,
112                                             ACPI_FADT_OFFSET(xpm1a_evt_blk.
113                                                              address));
114         }
115
116         if (!acpi_gbl_FADT->xpm1a_cnt_blk.address) {
117                 acpi_ut_fadt_register_error("X_PM1a_CNT_BLK", 0,
118                                             ACPI_FADT_OFFSET(xpm1a_cnt_blk.
119                                                              address));
120         }
121
122         if (!acpi_gbl_FADT->xpm_tmr_blk.address) {
123                 acpi_ut_fadt_register_error("X_PM_TMR_BLK", 0,
124                                             ACPI_FADT_OFFSET(xpm_tmr_blk.
125                                                              address));
126         }
127
128         if ((acpi_gbl_FADT->xpm2_cnt_blk.address &&
129              !acpi_gbl_FADT->pm2_cnt_len)) {
130                 acpi_ut_fadt_register_error("PM2_CNT_LEN",
131                                             (u32) acpi_gbl_FADT->pm2_cnt_len,
132                                             ACPI_FADT_OFFSET(pm2_cnt_len));
133         }
134
135         if (acpi_gbl_FADT->pm_tm_len < 4) {
136                 acpi_ut_fadt_register_error("PM_TM_LEN",
137                                             (u32) acpi_gbl_FADT->pm_tm_len,
138                                             ACPI_FADT_OFFSET(pm_tm_len));
139         }
140
141         /* Length of GPE blocks must be a multiple of 2 */
142
143         if (acpi_gbl_FADT->xgpe0_blk.address &&
144             (acpi_gbl_FADT->gpe0_blk_len & 1)) {
145                 acpi_ut_fadt_register_error("(x)GPE0_BLK_LEN",
146                                             (u32) acpi_gbl_FADT->gpe0_blk_len,
147                                             ACPI_FADT_OFFSET(gpe0_blk_len));
148         }
149
150         if (acpi_gbl_FADT->xgpe1_blk.address &&
151             (acpi_gbl_FADT->gpe1_blk_len & 1)) {
152                 acpi_ut_fadt_register_error("(x)GPE1_BLK_LEN",
153                                             (u32) acpi_gbl_FADT->gpe1_blk_len,
154                                             ACPI_FADT_OFFSET(gpe1_blk_len));
155         }
156
157         return (AE_OK);
158 }
159
160 /******************************************************************************
161  *
162  * FUNCTION:    acpi_ut_terminate
163  *
164  * PARAMETERS:  none
165  *
166  * RETURN:      none
167  *
168  * DESCRIPTION: Free global memory
169  *
170  ******************************************************************************/
171
172 static void acpi_ut_terminate(void)
173 {
174         struct acpi_gpe_block_info *gpe_block;
175         struct acpi_gpe_block_info *next_gpe_block;
176         struct acpi_gpe_xrupt_info *gpe_xrupt_info;
177         struct acpi_gpe_xrupt_info *next_gpe_xrupt_info;
178
179         ACPI_FUNCTION_TRACE("ut_terminate");
180
181         /* Free global tables, etc. */
182         /* Free global GPE blocks and related info structures */
183
184         gpe_xrupt_info = acpi_gbl_gpe_xrupt_list_head;
185         while (gpe_xrupt_info) {
186                 gpe_block = gpe_xrupt_info->gpe_block_list_head;
187                 while (gpe_block) {
188                         next_gpe_block = gpe_block->next;
189                         ACPI_MEM_FREE(gpe_block->event_info);
190                         ACPI_MEM_FREE(gpe_block->register_info);
191                         ACPI_MEM_FREE(gpe_block);
192
193                         gpe_block = next_gpe_block;
194                 }
195                 next_gpe_xrupt_info = gpe_xrupt_info->next;
196                 ACPI_MEM_FREE(gpe_xrupt_info);
197                 gpe_xrupt_info = next_gpe_xrupt_info;
198         }
199
200         return_VOID;
201 }
202
203 /*******************************************************************************
204  *
205  * FUNCTION:    acpi_ut_subsystem_shutdown
206  *
207  * PARAMETERS:  none
208  *
209  * RETURN:      none
210  *
211  * DESCRIPTION: Shutdown the various subsystems.  Don't delete the mutex
212  *              objects here -- because the AML debugger may be still running.
213  *
214  ******************************************************************************/
215
216 void acpi_ut_subsystem_shutdown(void)
217 {
218
219         ACPI_FUNCTION_TRACE("ut_subsystem_shutdown");
220
221         /* Just exit if subsystem is already shutdown */
222
223         if (acpi_gbl_shutdown) {
224                 ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
225                                   "ACPI Subsystem is already terminated\n"));
226                 return_VOID;
227         }
228
229         /* Subsystem appears active, go ahead and shut it down */
230
231         acpi_gbl_shutdown = TRUE;
232         ACPI_DEBUG_PRINT((ACPI_DB_INFO, "Shutting down ACPI Subsystem...\n"));
233
234         /* Close the acpi_event Handling */
235
236         acpi_ev_terminate();
237
238         /* Close the Namespace */
239
240         acpi_ns_terminate();
241
242         /* Close the globals */
243
244         acpi_ut_terminate();
245
246         /* Purge the local caches */
247
248         (void)acpi_ut_delete_caches();
249
250         /* Debug only - display leftover memory allocation, if any */
251
252 #ifdef ACPI_DBG_TRACK_ALLOCATIONS
253         acpi_ut_dump_allocations(ACPI_UINT32_MAX, NULL);
254 #endif
255
256         return_VOID;
257 }