Merge branch 'cpus4096-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git...
[linux-2.6] / drivers / usb / serial / kobil_sct.h
1 #define SUSBCRequest_SetBaudRateParityAndStopBits       1
2 #define SUSBCR_SBR_MASK                         0xFF00
3 #define SUSBCR_SBR_1200                         0x0100
4 #define SUSBCR_SBR_9600                         0x0200
5 #define SUSBCR_SBR_19200                        0x0400
6 #define SUSBCR_SBR_28800                        0x0800
7 #define SUSBCR_SBR_38400                        0x1000
8 #define SUSBCR_SBR_57600                        0x2000
9 #define SUSBCR_SBR_115200                       0x4000
10
11 #define SUSBCR_SPASB_MASK                       0x0070
12 #define SUSBCR_SPASB_NoParity                   0x0010
13 #define SUSBCR_SPASB_OddParity                  0x0020
14 #define SUSBCR_SPASB_EvenParity                 0x0040
15
16 #define SUSBCR_SPASB_STPMASK                    0x0003
17 #define SUSBCR_SPASB_1StopBit                   0x0001
18 #define SUSBCR_SPASB_2StopBits                  0x0002
19
20 #define SUSBCRequest_SetStatusLinesOrQueues     2
21 #define SUSBCR_SSL_SETRTS                       0x0001
22 #define SUSBCR_SSL_CLRRTS                       0x0002
23 #define SUSBCR_SSL_SETDTR                       0x0004
24 #define SUSBCR_SSL_CLRDTR                       0x0010
25
26 #define SUSBCR_SSL_PURGE_TXABORT                0x0100  // Kill the pending/current writes to the comm port.
27 #define SUSBCR_SSL_PURGE_RXABORT                0x0200  // Kill the pending/current reads to the comm port.
28 #define SUSBCR_SSL_PURGE_TXCLEAR                0x0400  // Kill the transmit queue if there.
29 #define SUSBCR_SSL_PURGE_RXCLEAR                0x0800  // Kill the typeahead buffer if there.
30
31 #define SUSBCRequest_GetStatusLineState         4
32 #define SUSBCR_GSL_RXCHAR                       0x0001  // Any Character received
33 #define SUSBCR_GSL_TXEMPTY                      0x0004  // Transmitt Queue Empty
34 #define SUSBCR_GSL_CTS                          0x0008  // CTS changed state
35 #define SUSBCR_GSL_DSR                          0x0010  // DSR changed state
36 #define SUSBCR_GSL_RLSD                         0x0020  // RLSD changed state
37 #define SUSBCR_GSL_BREAK                        0x0040  // BREAK received
38 #define SUSBCR_GSL_ERR                          0x0080  // Line status error occurred
39 #define SUSBCR_GSL_RING                         0x0100  // Ring signal detected
40
41 #define SUSBCRequest_Misc                       8
42 #define SUSBCR_MSC_ResetReader                  0x0001  // use a predefined reset sequence
43 #define SUSBCR_MSC_ResetAllQueues               0x0002  // use a predefined sequence to reset the internal queues
44
45 #define SUSBCRequest_GetMisc                    0x10
46 #define SUSBCR_MSC_GetFWVersion                 0x0001  /* get the firmware version from device,
47                                                            coded like this 0xHHLLBBPP
48                                                            with HH = Firmware Version High Byte
49                                                            LL = Firmware Version Low Byte
50                                                            BB = Build Number
51                                                            PP = Further Attributes
52                                                         */
53
54 #define SUSBCR_MSC_GetHWVersion                 0x0002  /* get the hardware version from device
55                                                            coded like this 0xHHLLPPRR
56                                                            with HH = Software Version High Byte
57                                                            LL = Software Version Low Byte
58                                                            PP = Further Attributes
59                                                            RR = Reserved for the hardware ID 
60                                                         */