Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid
[linux-2.6] / drivers / scsi / aacraid / rx.c
1 /*
2  *      Adaptec AAC series RAID controller driver
3  *      (c) Copyright 2001 Red Hat Inc. <alan@redhat.com>
4  *
5  * based on the old aacraid driver that is..
6  * Adaptec aacraid device driver for Linux.
7  *
8  * Copyright (c) 2000-2007 Adaptec, Inc. (aacraid@adaptec.com)
9  *
10  * This program is free software; you can redistribute it and/or modify
11  * it under the terms of the GNU General Public License as published by
12  * the Free Software Foundation; either version 2, or (at your option)
13  * any later version.
14  *
15  * This program is distributed in the hope that it will be useful,
16  * but WITHOUT ANY WARRANTY; without even the implied warranty of
17  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
18  * GNU General Public License for more details.
19  *
20  * You should have received a copy of the GNU General Public License
21  * along with this program; see the file COPYING.  If not, write to
22  * the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA.
23  *
24  * Module Name:
25  *  rx.c
26  *
27  * Abstract: Hardware miniport for Drawbridge specific hardware functions.
28  *
29  */
30
31 #include <linux/kernel.h>
32 #include <linux/init.h>
33 #include <linux/types.h>
34 #include <linux/pci.h>
35 #include <linux/spinlock.h>
36 #include <linux/slab.h>
37 #include <linux/blkdev.h>
38 #include <linux/delay.h>
39 #include <linux/completion.h>
40 #include <linux/time.h>
41 #include <linux/interrupt.h>
42 #include <asm/semaphore.h>
43
44 #include <scsi/scsi_host.h>
45
46 #include "aacraid.h"
47
48 static irqreturn_t aac_rx_intr_producer(int irq, void *dev_id)
49 {
50         struct aac_dev *dev = dev_id;
51         unsigned long bellbits;
52         u8 intstat = rx_readb(dev, MUnit.OISR);
53
54         /*
55          *      Read mask and invert because drawbridge is reversed.
56          *      This allows us to only service interrupts that have
57          *      been enabled.
58          *      Check to see if this is our interrupt.  If it isn't just return
59          */
60         if (likely(intstat & ~(dev->OIMR))) {
61                 bellbits = rx_readl(dev, OutboundDoorbellReg);
62                 if (unlikely(bellbits & DoorBellPrintfReady)) {
63                         aac_printf(dev, readl (&dev->IndexRegs->Mailbox[5]));
64                         rx_writel(dev, MUnit.ODR,DoorBellPrintfReady);
65                         rx_writel(dev, InboundDoorbellReg,DoorBellPrintfDone);
66                 }
67                 else if (unlikely(bellbits & DoorBellAdapterNormCmdReady)) {
68                         rx_writel(dev, MUnit.ODR, DoorBellAdapterNormCmdReady);
69                         aac_command_normal(&dev->queues->queue[HostNormCmdQueue]);
70                 }
71                 else if (likely(bellbits & DoorBellAdapterNormRespReady)) {
72                         rx_writel(dev, MUnit.ODR,DoorBellAdapterNormRespReady);
73                         aac_response_normal(&dev->queues->queue[HostNormRespQueue]);
74                 }
75                 else if (unlikely(bellbits & DoorBellAdapterNormCmdNotFull)) {
76                         rx_writel(dev, MUnit.ODR, DoorBellAdapterNormCmdNotFull);
77                 }
78                 else if (unlikely(bellbits & DoorBellAdapterNormRespNotFull)) {
79                         rx_writel(dev, MUnit.ODR, DoorBellAdapterNormCmdNotFull);
80                         rx_writel(dev, MUnit.ODR, DoorBellAdapterNormRespNotFull);
81                 }
82                 return IRQ_HANDLED;
83         }
84         return IRQ_NONE;
85 }
86
87 static irqreturn_t aac_rx_intr_message(int irq, void *dev_id)
88 {
89         struct aac_dev *dev = dev_id;
90         u32 Index = rx_readl(dev, MUnit.OutboundQueue);
91         if (unlikely(Index == 0xFFFFFFFFL))
92                 Index = rx_readl(dev, MUnit.OutboundQueue);
93         if (likely(Index != 0xFFFFFFFFL)) {
94                 do {
95                         if (unlikely(aac_intr_normal(dev, Index))) {
96                                 rx_writel(dev, MUnit.OutboundQueue, Index);
97                                 rx_writel(dev, MUnit.ODR, DoorBellAdapterNormRespReady);
98                         }
99                         Index = rx_readl(dev, MUnit.OutboundQueue);
100                 } while (Index != 0xFFFFFFFFL);
101                 return IRQ_HANDLED;
102         }
103         return IRQ_NONE;
104 }
105
106 /**
107  *      aac_rx_disable_interrupt        -       Disable interrupts
108  *      @dev: Adapter
109  */
110
111 static void aac_rx_disable_interrupt(struct aac_dev *dev)
112 {
113         rx_writeb(dev, MUnit.OIMR, dev->OIMR = 0xff);
114 }
115
116 /**
117  *      aac_rx_enable_interrupt_producer        -       Enable interrupts
118  *      @dev: Adapter
119  */
120
121 static void aac_rx_enable_interrupt_producer(struct aac_dev *dev)
122 {
123         rx_writeb(dev, MUnit.OIMR, dev->OIMR = 0xfb);
124 }
125
126 /**
127  *      aac_rx_enable_interrupt_message -       Enable interrupts
128  *      @dev: Adapter
129  */
130
131 static void aac_rx_enable_interrupt_message(struct aac_dev *dev)
132 {
133         rx_writeb(dev, MUnit.OIMR, dev->OIMR = 0xf7);
134 }
135
136 /**
137  *      rx_sync_cmd     -       send a command and wait
138  *      @dev: Adapter
139  *      @command: Command to execute
140  *      @p1: first parameter
141  *      @ret: adapter status
142  *
143  *      This routine will send a synchronous command to the adapter and wait 
144  *      for its completion.
145  */
146
147 static int rx_sync_cmd(struct aac_dev *dev, u32 command,
148         u32 p1, u32 p2, u32 p3, u32 p4, u32 p5, u32 p6,
149         u32 *status, u32 * r1, u32 * r2, u32 * r3, u32 * r4)
150 {
151         unsigned long start;
152         int ok;
153         /*
154          *      Write the command into Mailbox 0
155          */
156         writel(command, &dev->IndexRegs->Mailbox[0]);
157         /*
158          *      Write the parameters into Mailboxes 1 - 6
159          */
160         writel(p1, &dev->IndexRegs->Mailbox[1]);
161         writel(p2, &dev->IndexRegs->Mailbox[2]);
162         writel(p3, &dev->IndexRegs->Mailbox[3]);
163         writel(p4, &dev->IndexRegs->Mailbox[4]);
164         /*
165          *      Clear the synch command doorbell to start on a clean slate.
166          */
167         rx_writel(dev, OutboundDoorbellReg, OUTBOUNDDOORBELL_0);
168         /*
169          *      Disable doorbell interrupts
170          */
171         rx_writeb(dev, MUnit.OIMR, dev->OIMR = 0xff);
172         /*
173          *      Force the completion of the mask register write before issuing
174          *      the interrupt.
175          */
176         rx_readb (dev, MUnit.OIMR);
177         /*
178          *      Signal that there is a new synch command
179          */
180         rx_writel(dev, InboundDoorbellReg, INBOUNDDOORBELL_0);
181
182         ok = 0;
183         start = jiffies;
184
185         /*
186          *      Wait up to 30 seconds
187          */
188         while (time_before(jiffies, start+30*HZ)) 
189         {
190                 udelay(5);      /* Delay 5 microseconds to let Mon960 get info. */
191                 /*
192                  *      Mon960 will set doorbell0 bit when it has completed the command.
193                  */
194                 if (rx_readl(dev, OutboundDoorbellReg) & OUTBOUNDDOORBELL_0) {
195                         /*
196                          *      Clear the doorbell.
197                          */
198                         rx_writel(dev, OutboundDoorbellReg, OUTBOUNDDOORBELL_0);
199                         ok = 1;
200                         break;
201                 }
202                 /*
203                  *      Yield the processor in case we are slow 
204                  */
205                 msleep(1);
206         }
207         if (unlikely(ok != 1)) {
208                 /*
209                  *      Restore interrupt mask even though we timed out
210                  */
211                 aac_adapter_enable_int(dev);
212                 return -ETIMEDOUT;
213         }
214         /*
215          *      Pull the synch status from Mailbox 0.
216          */
217         if (status)
218                 *status = readl(&dev->IndexRegs->Mailbox[0]);
219         if (r1)
220                 *r1 = readl(&dev->IndexRegs->Mailbox[1]);
221         if (r2)
222                 *r2 = readl(&dev->IndexRegs->Mailbox[2]);
223         if (r3)
224                 *r3 = readl(&dev->IndexRegs->Mailbox[3]);
225         if (r4)
226                 *r4 = readl(&dev->IndexRegs->Mailbox[4]);
227         /*
228          *      Clear the synch command doorbell.
229          */
230         rx_writel(dev, OutboundDoorbellReg, OUTBOUNDDOORBELL_0);
231         /*
232          *      Restore interrupt mask
233          */
234         aac_adapter_enable_int(dev);
235         return 0;
236
237 }
238
239 /**
240  *      aac_rx_interrupt_adapter        -       interrupt adapter
241  *      @dev: Adapter
242  *
243  *      Send an interrupt to the i960 and breakpoint it.
244  */
245
246 static void aac_rx_interrupt_adapter(struct aac_dev *dev)
247 {
248         rx_sync_cmd(dev, BREAKPOINT_REQUEST, 0, 0, 0, 0, 0, 0, NULL, NULL, NULL, NULL, NULL);
249 }
250
251 /**
252  *      aac_rx_notify_adapter           -       send an event to the adapter
253  *      @dev: Adapter
254  *      @event: Event to send
255  *
256  *      Notify the i960 that something it probably cares about has
257  *      happened.
258  */
259
260 static void aac_rx_notify_adapter(struct aac_dev *dev, u32 event)
261 {
262         switch (event) {
263
264         case AdapNormCmdQue:
265                 rx_writel(dev, MUnit.IDR,INBOUNDDOORBELL_1);
266                 break;
267         case HostNormRespNotFull:
268                 rx_writel(dev, MUnit.IDR,INBOUNDDOORBELL_4);
269                 break;
270         case AdapNormRespQue:
271                 rx_writel(dev, MUnit.IDR,INBOUNDDOORBELL_2);
272                 break;
273         case HostNormCmdNotFull:
274                 rx_writel(dev, MUnit.IDR,INBOUNDDOORBELL_3);
275                 break;
276         case HostShutdown:
277                 break;
278         case FastIo:
279                 rx_writel(dev, MUnit.IDR,INBOUNDDOORBELL_6);
280                 break;
281         case AdapPrintfDone:
282                 rx_writel(dev, MUnit.IDR,INBOUNDDOORBELL_5);
283                 break;
284         default:
285                 BUG();
286                 break;
287         }
288 }
289
290 /**
291  *      aac_rx_start_adapter            -       activate adapter
292  *      @dev:   Adapter
293  *
294  *      Start up processing on an i960 based AAC adapter
295  */
296
297 static void aac_rx_start_adapter(struct aac_dev *dev)
298 {
299         struct aac_init *init;
300
301         init = dev->init;
302         init->HostElapsedSeconds = cpu_to_le32(get_seconds());
303         // We can only use a 32 bit address here
304         rx_sync_cmd(dev, INIT_STRUCT_BASE_ADDRESS, (u32)(ulong)dev->init_pa,
305           0, 0, 0, 0, 0, NULL, NULL, NULL, NULL, NULL);
306 }
307
308 /**
309  *      aac_rx_check_health
310  *      @dev: device to check if healthy
311  *
312  *      Will attempt to determine if the specified adapter is alive and
313  *      capable of handling requests, returning 0 if alive.
314  */
315 static int aac_rx_check_health(struct aac_dev *dev)
316 {
317         u32 status = rx_readl(dev, MUnit.OMRx[0]);
318
319         /*
320          *      Check to see if the board failed any self tests.
321          */
322         if (unlikely(status & SELF_TEST_FAILED))
323                 return -1;
324         /*
325          *      Check to see if the board panic'd.
326          */
327         if (unlikely(status & KERNEL_PANIC)) {
328                 char * buffer;
329                 struct POSTSTATUS {
330                         __le32 Post_Command;
331                         __le32 Post_Address;
332                 } * post;
333                 dma_addr_t paddr, baddr;
334                 int ret;
335
336                 if (likely((status & 0xFF000000L) == 0xBC000000L))
337                         return (status >> 16) & 0xFF;
338                 buffer = pci_alloc_consistent(dev->pdev, 512, &baddr);
339                 ret = -2;
340                 if (unlikely(buffer == NULL))
341                         return ret;
342                 post = pci_alloc_consistent(dev->pdev,
343                   sizeof(struct POSTSTATUS), &paddr);
344                 if (unlikely(post == NULL)) {
345                         pci_free_consistent(dev->pdev, 512, buffer, baddr);
346                         return ret;
347                 }
348                 memset(buffer, 0, 512);
349                 post->Post_Command = cpu_to_le32(COMMAND_POST_RESULTS);
350                 post->Post_Address = cpu_to_le32(baddr);
351                 rx_writel(dev, MUnit.IMRx[0], paddr);
352                 rx_sync_cmd(dev, COMMAND_POST_RESULTS, baddr, 0, 0, 0, 0, 0,
353                   NULL, NULL, NULL, NULL, NULL);
354                 pci_free_consistent(dev->pdev, sizeof(struct POSTSTATUS),
355                   post, paddr);
356                 if (likely((buffer[0] == '0') && ((buffer[1] == 'x') || (buffer[1] == 'X')))) {
357                         ret = (buffer[2] <= '9') ? (buffer[2] - '0') : (buffer[2] - 'A' + 10);
358                         ret <<= 4;
359                         ret += (buffer[3] <= '9') ? (buffer[3] - '0') : (buffer[3] - 'A' + 10);
360                 }
361                 pci_free_consistent(dev->pdev, 512, buffer, baddr);
362                 return ret;
363         }
364         /*
365          *      Wait for the adapter to be up and running.
366          */
367         if (unlikely(!(status & KERNEL_UP_AND_RUNNING)))
368                 return -3;
369         /*
370          *      Everything is OK
371          */
372         return 0;
373 }
374
375 /**
376  *      aac_rx_deliver_producer
377  *      @fib: fib to issue
378  *
379  *      Will send a fib, returning 0 if successful.
380  */
381 int aac_rx_deliver_producer(struct fib * fib)
382 {
383         struct aac_dev *dev = fib->dev;
384         struct aac_queue *q = &dev->queues->queue[AdapNormCmdQueue];
385         unsigned long qflags;
386         u32 Index;
387         unsigned long nointr = 0;
388
389         spin_lock_irqsave(q->lock, qflags);
390         aac_queue_get( dev, &Index, AdapNormCmdQueue, fib->hw_fib_va, 1, fib, &nointr);
391
392         q->numpending++;
393         *(q->headers.producer) = cpu_to_le32(Index + 1);
394         spin_unlock_irqrestore(q->lock, qflags);
395         if (!(nointr & aac_config.irq_mod))
396                 aac_adapter_notify(dev, AdapNormCmdQueue);
397
398         return 0;
399 }
400
401 /**
402  *      aac_rx_deliver_message
403  *      @fib: fib to issue
404  *
405  *      Will send a fib, returning 0 if successful.
406  */
407 static int aac_rx_deliver_message(struct fib * fib)
408 {
409         struct aac_dev *dev = fib->dev;
410         struct aac_queue *q = &dev->queues->queue[AdapNormCmdQueue];
411         unsigned long qflags;
412         u32 Index;
413         u64 addr;
414         volatile void __iomem *device;
415
416         unsigned long count = 10000000L; /* 50 seconds */
417         spin_lock_irqsave(q->lock, qflags);
418         q->numpending++;
419         spin_unlock_irqrestore(q->lock, qflags);
420         for(;;) {
421                 Index = rx_readl(dev, MUnit.InboundQueue);
422                 if (unlikely(Index == 0xFFFFFFFFL))
423                         Index = rx_readl(dev, MUnit.InboundQueue);
424                 if (likely(Index != 0xFFFFFFFFL))
425                         break;
426                 if (--count == 0) {
427                         spin_lock_irqsave(q->lock, qflags);
428                         q->numpending--;
429                         spin_unlock_irqrestore(q->lock, qflags);
430                         return -ETIMEDOUT;
431                 }
432                 udelay(5);
433         }
434         device = dev->base + Index;
435         addr = fib->hw_fib_pa;
436         writel((u32)(addr & 0xffffffff), device);
437         device += sizeof(u32);
438         writel((u32)(addr >> 32), device);
439         device += sizeof(u32);
440         writel(le16_to_cpu(fib->hw_fib_va->header.Size), device);
441         rx_writel(dev, MUnit.InboundQueue, Index);
442         return 0;
443 }
444
445 /**
446  *      aac_rx_ioremap
447  *      @size: mapping resize request
448  *
449  */
450 static int aac_rx_ioremap(struct aac_dev * dev, u32 size)
451 {
452         if (!size) {
453                 iounmap(dev->regs.rx);
454                 return 0;
455         }
456         dev->base = dev->regs.rx = ioremap(dev->scsi_host_ptr->base, size);
457         if (dev->base == NULL)
458                 return -1;
459         dev->IndexRegs = &dev->regs.rx->IndexRegs;
460         return 0;
461 }
462
463 static int aac_rx_restart_adapter(struct aac_dev *dev, int bled)
464 {
465         u32 var;
466
467         if (!(dev->supplement_adapter_info.SupportedOptions2 &
468           AAC_OPTION_MU_RESET) || (bled >= 0) || (bled == -2)) {
469                 if (bled)
470                         printk(KERN_ERR "%s%d: adapter kernel panic'd %x.\n",
471                                 dev->name, dev->id, bled);
472                 else {
473                         bled = aac_adapter_sync_cmd(dev, IOP_RESET_ALWAYS,
474                           0, 0, 0, 0, 0, 0, &var, NULL, NULL, NULL, NULL);
475                         if (!bled && (var != 0x00000001) && (var != 0x3803000F))
476                                 bled = -EINVAL;
477                 }
478                 if (bled && (bled != -ETIMEDOUT))
479                         bled = aac_adapter_sync_cmd(dev, IOP_RESET,
480                           0, 0, 0, 0, 0, 0, &var, NULL, NULL, NULL, NULL);
481
482                 if (bled && (bled != -ETIMEDOUT))
483                         return -EINVAL;
484         }
485         if (bled || (var == 0x3803000F)) { /* USE_OTHER_METHOD */
486                 rx_writel(dev, MUnit.reserved2, 3);
487                 msleep(5000); /* Delay 5 seconds */
488                 var = 0x00000001;
489         }
490         if (var != 0x00000001)
491                 return -EINVAL;
492         if (rx_readl(dev, MUnit.OMRx[0]) & KERNEL_PANIC)
493                 return -ENODEV;
494         if (startup_timeout < 300)
495                 startup_timeout = 300;
496         return 0;
497 }
498
499 /**
500  *      aac_rx_select_comm      -       Select communications method
501  *      @dev: Adapter
502  *      @comm: communications method
503  */
504
505 int aac_rx_select_comm(struct aac_dev *dev, int comm)
506 {
507         switch (comm) {
508         case AAC_COMM_PRODUCER:
509                 dev->a_ops.adapter_enable_int = aac_rx_enable_interrupt_producer;
510                 dev->a_ops.adapter_intr = aac_rx_intr_producer;
511                 dev->a_ops.adapter_deliver = aac_rx_deliver_producer;
512                 break;
513         case AAC_COMM_MESSAGE:
514                 dev->a_ops.adapter_enable_int = aac_rx_enable_interrupt_message;
515                 dev->a_ops.adapter_intr = aac_rx_intr_message;
516                 dev->a_ops.adapter_deliver = aac_rx_deliver_message;
517                 break;
518         default:
519                 return 1;
520         }
521         return 0;
522 }
523
524 /**
525  *      aac_rx_init     -       initialize an i960 based AAC card
526  *      @dev: device to configure
527  *
528  *      Allocate and set up resources for the i960 based AAC variants. The 
529  *      device_interface in the commregion will be allocated and linked 
530  *      to the comm region.
531  */
532
533 int _aac_rx_init(struct aac_dev *dev)
534 {
535         unsigned long start;
536         unsigned long status;
537         int restart = 0;
538         int instance = dev->id;
539         const char * name = dev->name;
540
541         if (aac_adapter_ioremap(dev, dev->base_size)) {
542                 printk(KERN_WARNING "%s: unable to map adapter.\n", name);
543                 goto error_iounmap;
544         }
545
546         /* Failure to reset here is an option ... */
547         dev->a_ops.adapter_sync_cmd = rx_sync_cmd;
548         dev->a_ops.adapter_enable_int = aac_rx_disable_interrupt;
549         dev->OIMR = status = rx_readb (dev, MUnit.OIMR);
550         if ((((status & 0x0c) != 0x0c) || aac_reset_devices || reset_devices) &&
551           !aac_rx_restart_adapter(dev, 0))
552                 /* Make sure the Hardware FIFO is empty */
553                 while ((++restart < 512) &&
554                   (rx_readl(dev, MUnit.OutboundQueue) != 0xFFFFFFFFL));
555         /*
556          *      Check to see if the board panic'd while booting.
557          */
558         status = rx_readl(dev, MUnit.OMRx[0]);
559         if (status & KERNEL_PANIC) {
560                 if (aac_rx_restart_adapter(dev, aac_rx_check_health(dev)))
561                         goto error_iounmap;
562                 ++restart;
563         }
564         /*
565          *      Check to see if the board failed any self tests.
566          */
567         status = rx_readl(dev, MUnit.OMRx[0]);
568         if (status & SELF_TEST_FAILED) {
569                 printk(KERN_ERR "%s%d: adapter self-test failed.\n", dev->name, instance);
570                 goto error_iounmap;
571         }
572         /*
573          *      Check to see if the monitor panic'd while booting.
574          */
575         if (status & MONITOR_PANIC) {
576                 printk(KERN_ERR "%s%d: adapter monitor panic.\n", dev->name, instance);
577                 goto error_iounmap;
578         }
579         start = jiffies;
580         /*
581          *      Wait for the adapter to be up and running. Wait up to 3 minutes
582          */
583         while (!((status = rx_readl(dev, MUnit.OMRx[0])) & KERNEL_UP_AND_RUNNING))
584         {
585                 if ((restart &&
586                   (status & (KERNEL_PANIC|SELF_TEST_FAILED|MONITOR_PANIC))) ||
587                   time_after(jiffies, start+HZ*startup_timeout)) {
588                         printk(KERN_ERR "%s%d: adapter kernel failed to start, init status = %lx.\n", 
589                                         dev->name, instance, status);
590                         goto error_iounmap;
591                 }
592                 if (!restart &&
593                   ((status & (KERNEL_PANIC|SELF_TEST_FAILED|MONITOR_PANIC)) ||
594                   time_after(jiffies, start + HZ *
595                   ((startup_timeout > 60)
596                     ? (startup_timeout - 60)
597                     : (startup_timeout / 2))))) {
598                         if (likely(!aac_rx_restart_adapter(dev, aac_rx_check_health(dev))))
599                                 start = jiffies;
600                         ++restart;
601                 }
602                 msleep(1);
603         }
604         if (restart && aac_commit)
605                 aac_commit = 1;
606         /*
607          *      Fill in the common function dispatch table.
608          */
609         dev->a_ops.adapter_interrupt = aac_rx_interrupt_adapter;
610         dev->a_ops.adapter_disable_int = aac_rx_disable_interrupt;
611         dev->a_ops.adapter_notify = aac_rx_notify_adapter;
612         dev->a_ops.adapter_sync_cmd = rx_sync_cmd;
613         dev->a_ops.adapter_check_health = aac_rx_check_health;
614         dev->a_ops.adapter_restart = aac_rx_restart_adapter;
615
616         /*
617          *      First clear out all interrupts.  Then enable the one's that we
618          *      can handle.
619          */
620         aac_adapter_comm(dev, AAC_COMM_PRODUCER);
621         aac_adapter_disable_int(dev);
622         rx_writel(dev, MUnit.ODR, 0xffffffff);
623         aac_adapter_enable_int(dev);
624
625         if (aac_init_adapter(dev) == NULL)
626                 goto error_iounmap;
627         aac_adapter_comm(dev, dev->comm_interface);
628         dev->msi = aac_msi && !pci_enable_msi(dev->pdev);
629         if (request_irq(dev->pdev->irq, dev->a_ops.adapter_intr,
630                         IRQF_SHARED|IRQF_DISABLED, "aacraid", dev) < 0) {
631                 if (dev->msi)
632                         pci_disable_msi(dev->pdev);
633                 printk(KERN_ERR "%s%d: Interrupt unavailable.\n",
634                         name, instance);
635                 goto error_iounmap;
636         }
637         aac_adapter_enable_int(dev);
638         /*
639          *      Tell the adapter that all is configured, and it can
640          * start accepting requests
641          */
642         aac_rx_start_adapter(dev);
643
644         return 0;
645
646 error_iounmap:
647
648         return -1;
649 }
650
651 int aac_rx_init(struct aac_dev *dev)
652 {
653         /*
654          *      Fill in the function dispatch table.
655          */
656         dev->a_ops.adapter_ioremap = aac_rx_ioremap;
657         dev->a_ops.adapter_comm = aac_rx_select_comm;
658
659         return _aac_rx_init(dev);
660 }