2 * Adaptec AIC79xx device driver for Linux.
4 * $Id: //depot/aic7xxx/linux/drivers/scsi/aic7xxx/aic79xx_osm.c#171 $
6 * --------------------------------------------------------------------------
7 * Copyright (c) 1994-2000 Justin T. Gibbs.
8 * Copyright (c) 1997-1999 Doug Ledford
9 * Copyright (c) 2000-2003 Adaptec Inc.
10 * All rights reserved.
12 * Redistribution and use in source and binary forms, with or without
13 * modification, are permitted provided that the following conditions
15 * 1. Redistributions of source code must retain the above copyright
16 * notice, this list of conditions, and the following disclaimer,
17 * without modification.
18 * 2. Redistributions in binary form must reproduce at minimum a disclaimer
19 * substantially similar to the "NO WARRANTY" disclaimer below
20 * ("Disclaimer") and any redistribution must be conditioned upon
21 * including a substantially similar Disclaimer requirement for further
22 * binary redistribution.
23 * 3. Neither the names of the above-listed copyright holders nor the names
24 * of any contributors may be used to endorse or promote products derived
25 * from this software without specific prior written permission.
27 * Alternatively, this software may be distributed under the terms of the
28 * GNU General Public License ("GPL") version 2 as published by the Free
29 * Software Foundation.
32 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
33 * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
34 * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
35 * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
36 * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
37 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
38 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
39 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
40 * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
41 * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
42 * POSSIBILITY OF SUCH DAMAGES.
45 #include "aic79xx_osm.h"
46 #include "aic79xx_inline.h"
47 #include <scsi/scsicam.h>
49 static struct scsi_transport_template *ahd_linux_transport_template = NULL;
51 #include <linux/init.h> /* __setup */
52 #include <linux/mm.h> /* For fetching system memory size */
53 #include <linux/blkdev.h> /* For block_size() */
54 #include <linux/delay.h> /* For ssleep/msleep */
55 #include <linux/device.h>
58 * Bucket size for counting good commands in between bad ones.
60 #define AHD_LINUX_ERR_THRESH 1000
63 * Set this to the delay in seconds after SCSI bus reset.
64 * Note, we honor this only for the initial bus reset.
65 * The scsi error recovery code performs its own bus settle
66 * delay handling for error recovery actions.
68 #ifdef CONFIG_AIC79XX_RESET_DELAY_MS
69 #define AIC79XX_RESET_DELAY CONFIG_AIC79XX_RESET_DELAY_MS
71 #define AIC79XX_RESET_DELAY 5000
75 * To change the default number of tagged transactions allowed per-device,
76 * add a line to the lilo.conf file like:
77 * append="aic79xx=verbose,tag_info:{{32,32,32,32},{32,32,32,32}}"
78 * which will result in the first four devices on the first two
79 * controllers being set to a tagged queue depth of 32.
81 * The tag_commands is an array of 16 to allow for wide and twin adapters.
82 * Twin adapters will use indexes 0-7 for channel 0, and indexes 8-15
86 uint16_t tag_commands[16]; /* Allow for wide/twin adapters. */
90 * Modify this as you see fit for your system.
92 * 0 tagged queuing disabled
93 * 1 <= n <= 253 n == max tags ever dispatched.
95 * The driver will throttle the number of commands dispatched to a
96 * device if it returns queue full. For devices with a fixed maximum
97 * queue depth, the driver will eventually determine this depth and
98 * lock it in (a console message is printed to indicate that a lock
99 * has occurred). On some devices, queue full is returned for a temporary
100 * resource shortage. These devices will return queue full at varying
101 * depths. The driver will throttle back when the queue fulls occur and
102 * attempt to slowly increase the depth over time as the device recovers
103 * from the resource shortage.
105 * In this example, the first line will disable tagged queueing for all
106 * the devices on the first probed aic79xx adapter.
108 * The second line enables tagged queueing with 4 commands/LUN for IDs
109 * (0, 2-11, 13-15), disables tagged queueing for ID 12, and tells the
110 * driver to attempt to use up to 64 tags for ID 1.
112 * The third line is the same as the first line.
114 * The fourth line disables tagged queueing for devices 0 and 3. It
115 * enables tagged queueing for the other IDs, with 16 commands/LUN
116 * for IDs 1 and 4, 127 commands/LUN for ID 8, and 4 commands/LUN for
117 * IDs 2, 5-7, and 9-15.
121 * NOTE: The below structure is for reference only, the actual structure
122 * to modify in order to change things is just below this comment block.
123 adapter_tag_info_t aic79xx_tag_info[] =
125 {{0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0}},
126 {{4, 64, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 0, 4, 4, 4}},
127 {{0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0}},
128 {{0, 16, 4, 0, 16, 4, 4, 4, 127, 4, 4, 4, 4, 4, 4, 4}}
132 #ifdef CONFIG_AIC79XX_CMDS_PER_DEVICE
133 #define AIC79XX_CMDS_PER_DEVICE CONFIG_AIC79XX_CMDS_PER_DEVICE
135 #define AIC79XX_CMDS_PER_DEVICE AHD_MAX_QUEUE
138 #define AIC79XX_CONFIGED_TAG_COMMANDS { \
139 AIC79XX_CMDS_PER_DEVICE, AIC79XX_CMDS_PER_DEVICE, \
140 AIC79XX_CMDS_PER_DEVICE, AIC79XX_CMDS_PER_DEVICE, \
141 AIC79XX_CMDS_PER_DEVICE, AIC79XX_CMDS_PER_DEVICE, \
142 AIC79XX_CMDS_PER_DEVICE, AIC79XX_CMDS_PER_DEVICE, \
143 AIC79XX_CMDS_PER_DEVICE, AIC79XX_CMDS_PER_DEVICE, \
144 AIC79XX_CMDS_PER_DEVICE, AIC79XX_CMDS_PER_DEVICE, \
145 AIC79XX_CMDS_PER_DEVICE, AIC79XX_CMDS_PER_DEVICE, \
146 AIC79XX_CMDS_PER_DEVICE, AIC79XX_CMDS_PER_DEVICE \
150 * By default, use the number of commands specified by
151 * the users kernel configuration.
153 static adapter_tag_info_t aic79xx_tag_info[] =
155 {AIC79XX_CONFIGED_TAG_COMMANDS},
156 {AIC79XX_CONFIGED_TAG_COMMANDS},
157 {AIC79XX_CONFIGED_TAG_COMMANDS},
158 {AIC79XX_CONFIGED_TAG_COMMANDS},
159 {AIC79XX_CONFIGED_TAG_COMMANDS},
160 {AIC79XX_CONFIGED_TAG_COMMANDS},
161 {AIC79XX_CONFIGED_TAG_COMMANDS},
162 {AIC79XX_CONFIGED_TAG_COMMANDS},
163 {AIC79XX_CONFIGED_TAG_COMMANDS},
164 {AIC79XX_CONFIGED_TAG_COMMANDS},
165 {AIC79XX_CONFIGED_TAG_COMMANDS},
166 {AIC79XX_CONFIGED_TAG_COMMANDS},
167 {AIC79XX_CONFIGED_TAG_COMMANDS},
168 {AIC79XX_CONFIGED_TAG_COMMANDS},
169 {AIC79XX_CONFIGED_TAG_COMMANDS},
170 {AIC79XX_CONFIGED_TAG_COMMANDS}
174 * The I/O cell on the chip is very configurable in respect to its analog
175 * characteristics. Set the defaults here; they can be overriden with
176 * the proper insmod parameters.
178 struct ahd_linux_iocell_opts
184 #define AIC79XX_DEFAULT_PRECOMP 0xFF
185 #define AIC79XX_DEFAULT_SLEWRATE 0xFF
186 #define AIC79XX_DEFAULT_AMPLITUDE 0xFF
187 #define AIC79XX_DEFAULT_IOOPTS \
189 AIC79XX_DEFAULT_PRECOMP, \
190 AIC79XX_DEFAULT_SLEWRATE, \
191 AIC79XX_DEFAULT_AMPLITUDE \
193 #define AIC79XX_PRECOMP_INDEX 0
194 #define AIC79XX_SLEWRATE_INDEX 1
195 #define AIC79XX_AMPLITUDE_INDEX 2
196 static struct ahd_linux_iocell_opts aic79xx_iocell_info[] =
198 AIC79XX_DEFAULT_IOOPTS,
199 AIC79XX_DEFAULT_IOOPTS,
200 AIC79XX_DEFAULT_IOOPTS,
201 AIC79XX_DEFAULT_IOOPTS,
202 AIC79XX_DEFAULT_IOOPTS,
203 AIC79XX_DEFAULT_IOOPTS,
204 AIC79XX_DEFAULT_IOOPTS,
205 AIC79XX_DEFAULT_IOOPTS,
206 AIC79XX_DEFAULT_IOOPTS,
207 AIC79XX_DEFAULT_IOOPTS,
208 AIC79XX_DEFAULT_IOOPTS,
209 AIC79XX_DEFAULT_IOOPTS,
210 AIC79XX_DEFAULT_IOOPTS,
211 AIC79XX_DEFAULT_IOOPTS,
212 AIC79XX_DEFAULT_IOOPTS,
213 AIC79XX_DEFAULT_IOOPTS
217 * There should be a specific return value for this in scsi.h, but
218 * it seems that most drivers ignore it.
220 #define DID_UNDERFLOW DID_ERROR
223 ahd_print_path(struct ahd_softc *ahd, struct scb *scb)
225 printk("(scsi%d:%c:%d:%d): ",
226 ahd->platform_data->host->host_no,
227 scb != NULL ? SCB_GET_CHANNEL(ahd, scb) : 'X',
228 scb != NULL ? SCB_GET_TARGET(ahd, scb) : -1,
229 scb != NULL ? SCB_GET_LUN(scb) : -1);
233 * XXX - these options apply unilaterally to _all_ adapters
234 * cards in the system. This should be fixed. Exceptions to this
235 * rule are noted in the comments.
239 * Skip the scsi bus reset. Non 0 make us skip the reset at startup. This
240 * has no effect on any later resets that might occur due to things like
243 static uint32_t aic79xx_no_reset;
246 * Should we force EXTENDED translation on a controller.
247 * 0 == Use whatever is in the SEEPROM or default to off
248 * 1 == Use whatever is in the SEEPROM or default to on
250 static uint32_t aic79xx_extended;
253 * PCI bus parity checking of the Adaptec controllers. This is somewhat
254 * dubious at best. To my knowledge, this option has never actually
255 * solved a PCI parity problem, but on certain machines with broken PCI
256 * chipset configurations, it can generate tons of false error messages.
257 * It's included in the driver for completeness.
258 * 0 = Shut off PCI parity check
259 * non-0 = Enable PCI parity check
261 * NOTE: you can't actually pass -1 on the lilo prompt. So, to set this
262 * variable to -1 you would actually want to simply pass the variable
263 * name without a number. That will invert the 0 which will result in
266 static uint32_t aic79xx_pci_parity = ~0;
269 * There are lots of broken chipsets in the world. Some of them will
270 * violate the PCI spec when we issue byte sized memory writes to our
271 * controller. I/O mapped register access, if allowed by the given
272 * platform, will work in almost all cases.
274 uint32_t aic79xx_allow_memio = ~0;
277 * So that we can set how long each device is given as a selection timeout.
278 * The table of values goes like this:
283 * We default to 256ms because some older devices need a longer time
284 * to respond to initial selection.
286 static uint32_t aic79xx_seltime;
289 * Certain devices do not perform any aging on commands. Should the
290 * device be saturated by commands in one portion of the disk, it is
291 * possible for transactions on far away sectors to never be serviced.
292 * To handle these devices, we can periodically send an ordered tag to
293 * force all outstanding transactions to be serviced prior to a new
296 static uint32_t aic79xx_periodic_otag;
298 /* Some storage boxes are using an LSI chip which has a bug making it
299 * impossible to use aic79xx Rev B chip in 320 speeds. The following
300 * storage boxes have been reported to be buggy:
301 * EonStor 3U 16-Bay: U16U-G3A3
302 * EonStor 2U 12-Bay: U12U-G3A3
303 * SentinelRAID: 2500F R5 / R6
304 * SentinelRAID: 2500F R1
305 * SentinelRAID: 2500F/1500F
308 * To get around this LSI bug, you can set your board to 160 mode
309 * or you can enable the SLOWCRC bit.
311 uint32_t aic79xx_slowcrc;
314 * Module information and settable options.
316 static char *aic79xx = NULL;
318 MODULE_AUTHOR("Maintainer: Hannes Reinecke <hare@suse.de>");
319 MODULE_DESCRIPTION("Adaptec AIC790X U320 SCSI Host Bus Adapter driver");
320 MODULE_LICENSE("Dual BSD/GPL");
321 MODULE_VERSION(AIC79XX_DRIVER_VERSION);
322 module_param(aic79xx, charp, 0444);
323 MODULE_PARM_DESC(aic79xx,
324 "period-delimited options string:\n"
325 " verbose Enable verbose/diagnostic logging\n"
326 " allow_memio Allow device registers to be memory mapped\n"
327 " debug Bitmask of debug values to enable\n"
328 " no_reset Suppress initial bus resets\n"
329 " extended Enable extended geometry on all controllers\n"
330 " periodic_otag Send an ordered tagged transaction\n"
331 " periodically to prevent tag starvation.\n"
332 " This may be required by some older disk\n"
333 " or drives/RAID arrays.\n"
334 " tag_info:<tag_str> Set per-target tag depth\n"
335 " global_tag_depth:<int> Global tag depth for all targets on all buses\n"
336 " slewrate:<slewrate_list>Set the signal slew rate (0-15).\n"
337 " precomp:<pcomp_list> Set the signal precompensation (0-7).\n"
338 " amplitude:<int> Set the signal amplitude (0-7).\n"
339 " seltime:<int> Selection Timeout:\n"
340 " (0/256ms,1/128ms,2/64ms,3/32ms)\n"
341 " slowcrc Turn on the SLOWCRC bit (Rev B only)\n"
343 " Sample /etc/modprobe.conf line:\n"
344 " Enable verbose logging\n"
345 " Set tag depth on Controller 2/Target 2 to 10 tags\n"
346 " Shorten the selection timeout to 128ms\n"
348 " options aic79xx 'aic79xx=verbose.tag_info:{{}.{}.{..10}}.seltime:1'\n"
351 static void ahd_linux_handle_scsi_status(struct ahd_softc *,
352 struct scsi_device *,
354 static void ahd_linux_queue_cmd_complete(struct ahd_softc *ahd,
355 struct scsi_cmnd *cmd);
356 static int ahd_linux_queue_abort_cmd(struct scsi_cmnd *cmd);
357 static void ahd_linux_initialize_scsi_bus(struct ahd_softc *ahd);
358 static u_int ahd_linux_user_tagdepth(struct ahd_softc *ahd,
359 struct ahd_devinfo *devinfo);
360 static void ahd_linux_device_queue_depth(struct scsi_device *);
361 static int ahd_linux_run_command(struct ahd_softc*,
362 struct ahd_linux_device *,
364 static void ahd_linux_setup_tag_info_global(char *p);
365 static int aic79xx_setup(char *c);
366 static void ahd_freeze_simq(struct ahd_softc *ahd);
367 static void ahd_release_simq(struct ahd_softc *ahd);
369 static int ahd_linux_unit;
372 /****************************** Inlines ***************************************/
373 static __inline void ahd_linux_unmap_scb(struct ahd_softc*, struct scb*);
376 ahd_linux_unmap_scb(struct ahd_softc *ahd, struct scb *scb)
378 struct scsi_cmnd *cmd;
381 ahd_sync_sglist(ahd, scb, BUS_DMASYNC_POSTWRITE);
385 /******************************** Macros **************************************/
386 #define BUILD_SCSIID(ahd, cmd) \
387 (((scmd_id(cmd) << TID_SHIFT) & TID) | (ahd)->our_id)
390 * Return a string describing the driver.
393 ahd_linux_info(struct Scsi_Host *host)
395 static char buffer[512];
398 struct ahd_softc *ahd;
401 ahd = *(struct ahd_softc **)host->hostdata;
402 memset(bp, 0, sizeof(buffer));
403 strcpy(bp, "Adaptec AIC79XX PCI-X SCSI HBA DRIVER, Rev ");
404 strcat(bp, AIC79XX_DRIVER_VERSION);
407 strcat(bp, ahd->description);
410 ahd_controller_info(ahd, ahd_info);
411 strcat(bp, ahd_info);
417 * Queue an SCB to the controller.
420 ahd_linux_queue(struct scsi_cmnd * cmd, void (*scsi_done) (struct scsi_cmnd *))
422 struct ahd_softc *ahd;
423 struct ahd_linux_device *dev = scsi_transport_device_data(cmd->device);
424 int rtn = SCSI_MLQUEUE_HOST_BUSY;
426 ahd = *(struct ahd_softc **)cmd->device->host->hostdata;
428 cmd->scsi_done = scsi_done;
429 cmd->result = CAM_REQ_INPROG << 16;
430 rtn = ahd_linux_run_command(ahd, dev, cmd);
435 static inline struct scsi_target **
436 ahd_linux_target_in_softc(struct scsi_target *starget)
438 struct ahd_softc *ahd =
439 *((struct ahd_softc **)dev_to_shost(&starget->dev)->hostdata);
440 unsigned int target_offset;
442 target_offset = starget->id;
443 if (starget->channel != 0)
446 return &ahd->platform_data->starget[target_offset];
450 ahd_linux_target_alloc(struct scsi_target *starget)
452 struct ahd_softc *ahd =
453 *((struct ahd_softc **)dev_to_shost(&starget->dev)->hostdata);
454 struct seeprom_config *sc = ahd->seep_config;
456 struct scsi_target **ahd_targp = ahd_linux_target_in_softc(starget);
457 struct ahd_devinfo devinfo;
458 struct ahd_initiator_tinfo *tinfo;
459 struct ahd_tmode_tstate *tstate;
460 char channel = starget->channel + 'A';
462 ahd_lock(ahd, &flags);
464 BUG_ON(*ahd_targp != NULL);
466 *ahd_targp = starget;
469 int flags = sc->device_flags[starget->id];
471 tinfo = ahd_fetch_transinfo(ahd, 'A', ahd->our_id,
472 starget->id, &tstate);
474 if ((flags & CFPACKETIZED) == 0) {
475 /* Do not negotiate packetized transfers */
476 spi_rd_strm(starget) = 0;
477 spi_pcomp_en(starget) = 0;
478 spi_rti(starget) = 0;
479 spi_wr_flow(starget) = 0;
480 spi_hold_mcs(starget) = 0;
482 if ((ahd->features & AHD_RTI) == 0)
483 spi_rti(starget) = 0;
486 if ((flags & CFQAS) == 0)
487 spi_qas(starget) = 0;
489 /* Transinfo values have been set to BIOS settings */
490 spi_max_width(starget) = (flags & CFWIDEB) ? 1 : 0;
491 spi_min_period(starget) = tinfo->user.period;
492 spi_max_offset(starget) = tinfo->user.offset;
495 tinfo = ahd_fetch_transinfo(ahd, channel, ahd->our_id,
496 starget->id, &tstate);
497 ahd_compile_devinfo(&devinfo, ahd->our_id, starget->id,
498 CAM_LUN_WILDCARD, channel,
500 ahd_set_syncrate(ahd, &devinfo, 0, 0, 0,
501 AHD_TRANS_GOAL, /*paused*/FALSE);
502 ahd_set_width(ahd, &devinfo, MSG_EXT_WDTR_BUS_8_BIT,
503 AHD_TRANS_GOAL, /*paused*/FALSE);
504 ahd_unlock(ahd, &flags);
510 ahd_linux_target_destroy(struct scsi_target *starget)
512 struct scsi_target **ahd_targp = ahd_linux_target_in_softc(starget);
518 ahd_linux_slave_alloc(struct scsi_device *sdev)
520 struct ahd_softc *ahd =
521 *((struct ahd_softc **)sdev->host->hostdata);
522 struct ahd_linux_device *dev;
525 printf("%s: Slave Alloc %d\n", ahd_name(ahd), sdev->id);
527 dev = scsi_transport_device_data(sdev);
528 memset(dev, 0, sizeof(*dev));
531 * We start out life using untagged
532 * transactions of which we allow one.
537 * Set maxtags to 0. This will be changed if we
538 * later determine that we are dealing with
539 * a tagged queuing capable device.
547 ahd_linux_slave_configure(struct scsi_device *sdev)
549 struct ahd_softc *ahd;
551 ahd = *((struct ahd_softc **)sdev->host->hostdata);
553 sdev_printk(KERN_INFO, sdev, "Slave Configure\n");
555 ahd_linux_device_queue_depth(sdev);
557 /* Initial Domain Validation */
558 if (!spi_initial_dv(sdev->sdev_target))
564 #if defined(__i386__)
566 * Return the disk geometry for the given SCSI device.
569 ahd_linux_biosparam(struct scsi_device *sdev, struct block_device *bdev,
570 sector_t capacity, int geom[])
578 struct ahd_softc *ahd;
580 ahd = *((struct ahd_softc **)sdev->host->hostdata);
582 bh = scsi_bios_ptable(bdev);
584 ret = scsi_partsize(bh, capacity,
585 &geom[2], &geom[0], &geom[1]);
592 cylinders = aic_sector_div(capacity, heads, sectors);
594 if (aic79xx_extended != 0)
597 extended = (ahd->flags & AHD_EXTENDED_TRANS_A) != 0;
598 if (extended && cylinders >= 1024) {
601 cylinders = aic_sector_div(capacity, heads, sectors);
611 * Abort the current SCSI command(s).
614 ahd_linux_abort(struct scsi_cmnd *cmd)
618 error = ahd_linux_queue_abort_cmd(cmd);
624 * Attempt to send a target reset message to the device that timed out.
627 ahd_linux_dev_reset(struct scsi_cmnd *cmd)
629 struct ahd_softc *ahd;
630 struct ahd_linux_device *dev;
631 struct scb *reset_scb;
633 int retval = SUCCESS;
636 struct ahd_initiator_tinfo *tinfo;
637 struct ahd_tmode_tstate *tstate;
639 DECLARE_COMPLETION_ONSTACK(done);
644 ahd = *(struct ahd_softc **)cmd->device->host->hostdata;
646 scmd_printk(KERN_INFO, cmd,
647 "Attempting to queue a TARGET RESET message:");
650 for (cdb_byte = 0; cdb_byte < cmd->cmd_len; cdb_byte++)
651 printf(" 0x%x", cmd->cmnd[cdb_byte]);
655 * Determine if we currently own this command.
657 dev = scsi_transport_device_data(cmd->device);
661 * No target device for this command exists,
662 * so we must not still own the command.
664 scmd_printk(KERN_INFO, cmd, "Is not an active device\n");
669 * Generate us a new SCB
671 reset_scb = ahd_get_scb(ahd, AHD_NEVER_COL_IDX);
673 scmd_printk(KERN_INFO, cmd, "No SCB available\n");
677 tinfo = ahd_fetch_transinfo(ahd, 'A', ahd->our_id,
678 cmd->device->id, &tstate);
679 reset_scb->io_ctx = cmd;
680 reset_scb->platform_data->dev = dev;
681 reset_scb->sg_count = 0;
682 ahd_set_residual(reset_scb, 0);
683 ahd_set_sense_residual(reset_scb, 0);
684 reset_scb->platform_data->xfer_len = 0;
685 reset_scb->hscb->control = 0;
686 reset_scb->hscb->scsiid = BUILD_SCSIID(ahd,cmd);
687 reset_scb->hscb->lun = cmd->device->lun;
688 reset_scb->hscb->cdb_len = 0;
689 reset_scb->hscb->task_management = SIU_TASKMGMT_LUN_RESET;
690 reset_scb->flags |= SCB_DEVICE_RESET|SCB_RECOVERY_SCB|SCB_ACTIVE;
691 if ((tinfo->curr.ppr_options & MSG_EXT_PPR_IU_REQ) != 0) {
692 reset_scb->flags |= SCB_PACKETIZED;
694 reset_scb->hscb->control |= MK_MESSAGE;
698 dev->commands_issued++;
700 ahd_lock(ahd, &flags);
702 LIST_INSERT_HEAD(&ahd->pending_scbs, reset_scb, pending_links);
703 ahd_queue_scb(ahd, reset_scb);
705 ahd->platform_data->eh_done = &done;
706 ahd_unlock(ahd, &flags);
708 printf("%s: Device reset code sleeping\n", ahd_name(ahd));
709 if (!wait_for_completion_timeout(&done, 5 * HZ)) {
710 ahd_lock(ahd, &flags);
711 ahd->platform_data->eh_done = NULL;
712 ahd_unlock(ahd, &flags);
713 printf("%s: Device reset timer expired (active %d)\n",
714 ahd_name(ahd), dev->active);
717 printf("%s: Device reset returning 0x%x\n", ahd_name(ahd), retval);
723 * Reset the SCSI bus.
726 ahd_linux_bus_reset(struct scsi_cmnd *cmd)
728 struct ahd_softc *ahd;
732 ahd = *(struct ahd_softc **)cmd->device->host->hostdata;
734 if ((ahd_debug & AHD_SHOW_RECOVERY) != 0)
735 printf("%s: Bus reset called for cmd %p\n",
738 ahd_lock(ahd, &flags);
740 found = ahd_reset_channel(ahd, scmd_channel(cmd) + 'A',
741 /*initiate reset*/TRUE);
742 ahd_unlock(ahd, &flags);
745 printf("%s: SCSI bus reset delivered. "
746 "%d SCBs aborted.\n", ahd_name(ahd), found);
751 struct scsi_host_template aic79xx_driver_template = {
752 .module = THIS_MODULE,
754 .proc_name = "aic79xx",
755 .proc_info = ahd_linux_proc_info,
756 .info = ahd_linux_info,
757 .queuecommand = ahd_linux_queue,
758 .eh_abort_handler = ahd_linux_abort,
759 .eh_device_reset_handler = ahd_linux_dev_reset,
760 .eh_bus_reset_handler = ahd_linux_bus_reset,
761 #if defined(__i386__)
762 .bios_param = ahd_linux_biosparam,
764 .can_queue = AHD_MAX_QUEUE,
768 .use_clustering = ENABLE_CLUSTERING,
769 .slave_alloc = ahd_linux_slave_alloc,
770 .slave_configure = ahd_linux_slave_configure,
771 .target_alloc = ahd_linux_target_alloc,
772 .target_destroy = ahd_linux_target_destroy,
775 /******************************** Bus DMA *************************************/
777 ahd_dma_tag_create(struct ahd_softc *ahd, bus_dma_tag_t parent,
778 bus_size_t alignment, bus_size_t boundary,
779 dma_addr_t lowaddr, dma_addr_t highaddr,
780 bus_dma_filter_t *filter, void *filterarg,
781 bus_size_t maxsize, int nsegments,
782 bus_size_t maxsegsz, int flags, bus_dma_tag_t *ret_tag)
786 dmat = malloc(sizeof(*dmat), M_DEVBUF, M_NOWAIT);
791 * Linux is very simplistic about DMA memory. For now don't
792 * maintain all specification information. Once Linux supplies
793 * better facilities for doing these operations, or the
794 * needs of this particular driver change, we might need to do
797 dmat->alignment = alignment;
798 dmat->boundary = boundary;
799 dmat->maxsize = maxsize;
805 ahd_dma_tag_destroy(struct ahd_softc *ahd, bus_dma_tag_t dmat)
807 free(dmat, M_DEVBUF);
811 ahd_dmamem_alloc(struct ahd_softc *ahd, bus_dma_tag_t dmat, void** vaddr,
812 int flags, bus_dmamap_t *mapp)
814 *vaddr = pci_alloc_consistent(ahd->dev_softc,
815 dmat->maxsize, mapp);
822 ahd_dmamem_free(struct ahd_softc *ahd, bus_dma_tag_t dmat,
823 void* vaddr, bus_dmamap_t map)
825 pci_free_consistent(ahd->dev_softc, dmat->maxsize,
830 ahd_dmamap_load(struct ahd_softc *ahd, bus_dma_tag_t dmat, bus_dmamap_t map,
831 void *buf, bus_size_t buflen, bus_dmamap_callback_t *cb,
832 void *cb_arg, int flags)
835 * Assume for now that this will only be used during
836 * initialization and not for per-transaction buffer mapping.
838 bus_dma_segment_t stack_sg;
840 stack_sg.ds_addr = map;
841 stack_sg.ds_len = dmat->maxsize;
842 cb(cb_arg, &stack_sg, /*nseg*/1, /*error*/0);
847 ahd_dmamap_destroy(struct ahd_softc *ahd, bus_dma_tag_t dmat, bus_dmamap_t map)
852 ahd_dmamap_unload(struct ahd_softc *ahd, bus_dma_tag_t dmat, bus_dmamap_t map)
858 /********************* Platform Dependent Functions ***************************/
860 ahd_linux_setup_iocell_info(u_long index, int instance, int targ, int32_t value)
864 && (instance < ARRAY_SIZE(aic79xx_iocell_info))) {
865 uint8_t *iocell_info;
867 iocell_info = (uint8_t*)&aic79xx_iocell_info[instance];
868 iocell_info[index] = value & 0xFFFF;
870 printf("iocell[%d:%ld] = %d\n", instance, index, value);
875 ahd_linux_setup_tag_info_global(char *p)
879 tags = simple_strtoul(p + 1, NULL, 0) & 0xff;
880 printf("Setting Global Tags= %d\n", tags);
882 for (i = 0; i < ARRAY_SIZE(aic79xx_tag_info); i++) {
883 for (j = 0; j < AHD_NUM_TARGETS; j++) {
884 aic79xx_tag_info[i].tag_commands[j] = tags;
890 ahd_linux_setup_tag_info(u_long arg, int instance, int targ, int32_t value)
893 if ((instance >= 0) && (targ >= 0)
894 && (instance < ARRAY_SIZE(aic79xx_tag_info))
895 && (targ < AHD_NUM_TARGETS)) {
896 aic79xx_tag_info[instance].tag_commands[targ] = value & 0x1FF;
898 printf("tag_info[%d:%d] = %d\n", instance, targ, value);
903 ahd_parse_brace_option(char *opt_name, char *opt_arg, char *end, int depth,
904 void (*callback)(u_long, int, int, int32_t),
913 char tok_list[] = {'.', ',', '{', '}', '\0'};
915 /* All options use a ':' name/arg separator */
923 * Restore separator that may be in
924 * the middle of our option argument.
926 tok_end = strchr(opt_arg, '\0');
932 if (instance == -1) {
939 printf("Malformed Option %s\n",
949 else if (instance != -1)
959 else if (instance >= 0)
968 for (i = 0; tok_list[i]; i++) {
969 tok_end2 = strchr(opt_arg, tok_list[i]);
970 if ((tok_end2) && (tok_end2 < tok_end))
973 callback(callback_arg, instance, targ,
974 simple_strtol(opt_arg, NULL, 0));
983 * Handle Linux boot parameters. This routine allows for assigning a value
984 * to a parameter with a ':' between the parameter and the value.
985 * ie. aic79xx=stpwlev:1,extended
988 aic79xx_setup(char *s)
998 { "extended", &aic79xx_extended },
999 { "no_reset", &aic79xx_no_reset },
1000 { "verbose", &aic79xx_verbose },
1001 { "allow_memio", &aic79xx_allow_memio},
1003 { "debug", &ahd_debug },
1005 { "periodic_otag", &aic79xx_periodic_otag },
1006 { "pci_parity", &aic79xx_pci_parity },
1007 { "seltime", &aic79xx_seltime },
1008 { "tag_info", NULL },
1009 { "global_tag_depth", NULL},
1010 { "slewrate", NULL },
1011 { "precomp", NULL },
1012 { "amplitude", NULL },
1013 { "slowcrc", &aic79xx_slowcrc },
1016 end = strchr(s, '\0');
1019 * XXX ia64 gcc isn't smart enough to know that ARRAY_SIZE
1020 * will never be 0 in this case.
1024 while ((p = strsep(&s, ",.")) != NULL) {
1027 for (i = 0; i < ARRAY_SIZE(options); i++) {
1029 n = strlen(options[i].name);
1030 if (strncmp(options[i].name, p, n) == 0)
1033 if (i == ARRAY_SIZE(options))
1036 if (strncmp(p, "global_tag_depth", n) == 0) {
1037 ahd_linux_setup_tag_info_global(p + n);
1038 } else if (strncmp(p, "tag_info", n) == 0) {
1039 s = ahd_parse_brace_option("tag_info", p + n, end,
1040 2, ahd_linux_setup_tag_info, 0);
1041 } else if (strncmp(p, "slewrate", n) == 0) {
1042 s = ahd_parse_brace_option("slewrate",
1043 p + n, end, 1, ahd_linux_setup_iocell_info,
1044 AIC79XX_SLEWRATE_INDEX);
1045 } else if (strncmp(p, "precomp", n) == 0) {
1046 s = ahd_parse_brace_option("precomp",
1047 p + n, end, 1, ahd_linux_setup_iocell_info,
1048 AIC79XX_PRECOMP_INDEX);
1049 } else if (strncmp(p, "amplitude", n) == 0) {
1050 s = ahd_parse_brace_option("amplitude",
1051 p + n, end, 1, ahd_linux_setup_iocell_info,
1052 AIC79XX_AMPLITUDE_INDEX);
1053 } else if (p[n] == ':') {
1054 *(options[i].flag) = simple_strtoul(p + n + 1, NULL, 0);
1055 } else if (!strncmp(p, "verbose", n)) {
1056 *(options[i].flag) = 1;
1058 *(options[i].flag) ^= 0xFFFFFFFF;
1064 __setup("aic79xx=", aic79xx_setup);
1066 uint32_t aic79xx_verbose;
1069 ahd_linux_register_host(struct ahd_softc *ahd, struct scsi_host_template *template)
1072 struct Scsi_Host *host;
1077 template->name = ahd->description;
1078 host = scsi_host_alloc(template, sizeof(struct ahd_softc *));
1082 *((struct ahd_softc **)host->hostdata) = ahd;
1083 ahd->platform_data->host = host;
1084 host->can_queue = AHD_MAX_QUEUE;
1085 host->cmd_per_lun = 2;
1086 host->sg_tablesize = AHD_NSEG;
1087 host->this_id = ahd->our_id;
1088 host->irq = ahd->platform_data->irq;
1089 host->max_id = (ahd->features & AHD_WIDE) ? 16 : 8;
1090 host->max_lun = AHD_NUM_LUNS;
1091 host->max_channel = 0;
1092 host->sg_tablesize = AHD_NSEG;
1094 ahd_set_unit(ahd, ahd_linux_unit++);
1095 ahd_unlock(ahd, &s);
1096 sprintf(buf, "scsi%d", host->host_no);
1097 new_name = malloc(strlen(buf) + 1, M_DEVBUF, M_NOWAIT);
1098 if (new_name != NULL) {
1099 strcpy(new_name, buf);
1100 ahd_set_name(ahd, new_name);
1102 host->unique_id = ahd->unit;
1103 ahd_linux_initialize_scsi_bus(ahd);
1104 ahd_intr_enable(ahd, TRUE);
1106 host->transportt = ahd_linux_transport_template;
1108 retval = scsi_add_host(host, &ahd->dev_softc->dev);
1110 printk(KERN_WARNING "aic79xx: scsi_add_host failed\n");
1111 scsi_host_put(host);
1115 scsi_scan_host(host);
1120 * Place the SCSI bus into a known state by either resetting it,
1121 * or forcing transfer negotiations on the next command to any
1125 ahd_linux_initialize_scsi_bus(struct ahd_softc *ahd)
1134 if (aic79xx_no_reset != 0)
1135 ahd->flags &= ~AHD_RESET_BUS_A;
1137 if ((ahd->flags & AHD_RESET_BUS_A) != 0)
1138 ahd_reset_channel(ahd, 'A', /*initiate_reset*/TRUE);
1140 numtarg = (ahd->features & AHD_WIDE) ? 16 : 8;
1145 * Force negotiation to async for all targets that
1146 * will not see an initial bus reset.
1148 for (; target_id < numtarg; target_id++) {
1149 struct ahd_devinfo devinfo;
1150 struct ahd_initiator_tinfo *tinfo;
1151 struct ahd_tmode_tstate *tstate;
1153 tinfo = ahd_fetch_transinfo(ahd, 'A', ahd->our_id,
1154 target_id, &tstate);
1155 ahd_compile_devinfo(&devinfo, ahd->our_id, target_id,
1156 CAM_LUN_WILDCARD, 'A', ROLE_INITIATOR);
1157 ahd_update_neg_request(ahd, &devinfo, tstate,
1158 tinfo, AHD_NEG_ALWAYS);
1160 ahd_unlock(ahd, &s);
1161 /* Give the bus some time to recover */
1162 if ((ahd->flags & AHD_RESET_BUS_A) != 0) {
1163 ahd_freeze_simq(ahd);
1164 msleep(AIC79XX_RESET_DELAY);
1165 ahd_release_simq(ahd);
1170 ahd_platform_alloc(struct ahd_softc *ahd, void *platform_arg)
1172 ahd->platform_data =
1173 malloc(sizeof(struct ahd_platform_data), M_DEVBUF, M_NOWAIT);
1174 if (ahd->platform_data == NULL)
1176 memset(ahd->platform_data, 0, sizeof(struct ahd_platform_data));
1177 ahd->platform_data->irq = AHD_LINUX_NOIRQ;
1179 ahd->seltime = (aic79xx_seltime & 0x3) << 4;
1184 ahd_platform_free(struct ahd_softc *ahd)
1186 struct scsi_target *starget;
1189 if (ahd->platform_data != NULL) {
1190 /* destroy all of the device and target objects */
1191 for (i = 0; i < AHD_NUM_TARGETS; i++) {
1192 starget = ahd->platform_data->starget[i];
1193 if (starget != NULL) {
1194 ahd->platform_data->starget[i] = NULL;
1198 if (ahd->platform_data->irq != AHD_LINUX_NOIRQ)
1199 free_irq(ahd->platform_data->irq, ahd);
1200 if (ahd->tags[0] == BUS_SPACE_PIO
1201 && ahd->bshs[0].ioport != 0)
1202 release_region(ahd->bshs[0].ioport, 256);
1203 if (ahd->tags[1] == BUS_SPACE_PIO
1204 && ahd->bshs[1].ioport != 0)
1205 release_region(ahd->bshs[1].ioport, 256);
1206 if (ahd->tags[0] == BUS_SPACE_MEMIO
1207 && ahd->bshs[0].maddr != NULL) {
1208 iounmap(ahd->bshs[0].maddr);
1209 release_mem_region(ahd->platform_data->mem_busaddr,
1212 if (ahd->platform_data->host)
1213 scsi_host_put(ahd->platform_data->host);
1215 free(ahd->platform_data, M_DEVBUF);
1220 ahd_platform_init(struct ahd_softc *ahd)
1223 * Lookup and commit any modified IO Cell options.
1225 if (ahd->unit < ARRAY_SIZE(aic79xx_iocell_info)) {
1226 struct ahd_linux_iocell_opts *iocell_opts;
1228 iocell_opts = &aic79xx_iocell_info[ahd->unit];
1229 if (iocell_opts->precomp != AIC79XX_DEFAULT_PRECOMP)
1230 AHD_SET_PRECOMP(ahd, iocell_opts->precomp);
1231 if (iocell_opts->slewrate != AIC79XX_DEFAULT_SLEWRATE)
1232 AHD_SET_SLEWRATE(ahd, iocell_opts->slewrate);
1233 if (iocell_opts->amplitude != AIC79XX_DEFAULT_AMPLITUDE)
1234 AHD_SET_AMPLITUDE(ahd, iocell_opts->amplitude);
1240 ahd_platform_freeze_devq(struct ahd_softc *ahd, struct scb *scb)
1242 ahd_platform_abort_scbs(ahd, SCB_GET_TARGET(ahd, scb),
1243 SCB_GET_CHANNEL(ahd, scb),
1244 SCB_GET_LUN(scb), SCB_LIST_NULL,
1245 ROLE_UNKNOWN, CAM_REQUEUE_REQ);
1249 ahd_platform_set_tags(struct ahd_softc *ahd, struct scsi_device *sdev,
1250 struct ahd_devinfo *devinfo, ahd_queue_alg alg)
1252 struct ahd_linux_device *dev;
1259 dev = scsi_transport_device_data(sdev);
1263 was_queuing = dev->flags & (AHD_DEV_Q_BASIC|AHD_DEV_Q_TAGGED);
1266 case AHD_QUEUE_NONE:
1269 case AHD_QUEUE_BASIC:
1270 now_queuing = AHD_DEV_Q_BASIC;
1272 case AHD_QUEUE_TAGGED:
1273 now_queuing = AHD_DEV_Q_TAGGED;
1276 if ((dev->flags & AHD_DEV_FREEZE_TIL_EMPTY) == 0
1277 && (was_queuing != now_queuing)
1278 && (dev->active != 0)) {
1279 dev->flags |= AHD_DEV_FREEZE_TIL_EMPTY;
1283 dev->flags &= ~(AHD_DEV_Q_BASIC|AHD_DEV_Q_TAGGED|AHD_DEV_PERIODIC_OTAG);
1287 usertags = ahd_linux_user_tagdepth(ahd, devinfo);
1290 * Start out agressively and allow our
1291 * dynamic queue depth algorithm to take
1294 dev->maxtags = usertags;
1295 dev->openings = dev->maxtags - dev->active;
1297 if (dev->maxtags == 0) {
1299 * Queueing is disabled by the user.
1302 } else if (alg == AHD_QUEUE_TAGGED) {
1303 dev->flags |= AHD_DEV_Q_TAGGED;
1304 if (aic79xx_periodic_otag != 0)
1305 dev->flags |= AHD_DEV_PERIODIC_OTAG;
1307 dev->flags |= AHD_DEV_Q_BASIC;
1309 /* We can only have one opening. */
1311 dev->openings = 1 - dev->active;
1314 switch ((dev->flags & (AHD_DEV_Q_BASIC|AHD_DEV_Q_TAGGED))) {
1315 case AHD_DEV_Q_BASIC:
1316 scsi_set_tag_type(sdev, MSG_SIMPLE_TASK);
1317 scsi_activate_tcq(sdev, dev->openings + dev->active);
1319 case AHD_DEV_Q_TAGGED:
1320 scsi_set_tag_type(sdev, MSG_ORDERED_TASK);
1321 scsi_activate_tcq(sdev, dev->openings + dev->active);
1325 * We allow the OS to queue 2 untagged transactions to
1326 * us at any time even though we can only execute them
1327 * serially on the controller/device. This should
1328 * remove some latency.
1330 scsi_deactivate_tcq(sdev, 1);
1336 ahd_platform_abort_scbs(struct ahd_softc *ahd, int target, char channel,
1337 int lun, u_int tag, role_t role, uint32_t status)
1343 ahd_linux_user_tagdepth(struct ahd_softc *ahd, struct ahd_devinfo *devinfo)
1345 static int warned_user;
1349 if ((ahd->user_discenable & devinfo->target_mask) != 0) {
1350 if (ahd->unit >= ARRAY_SIZE(aic79xx_tag_info)) {
1352 if (warned_user == 0) {
1354 "aic79xx: WARNING: Insufficient tag_info instances\n"
1355 "aic79xx: for installed controllers. Using defaults\n"
1356 "aic79xx: Please update the aic79xx_tag_info array in\n"
1357 "aic79xx: the aic79xx_osm.c source file.\n");
1360 tags = AHD_MAX_QUEUE;
1362 adapter_tag_info_t *tag_info;
1364 tag_info = &aic79xx_tag_info[ahd->unit];
1365 tags = tag_info->tag_commands[devinfo->target_offset];
1366 if (tags > AHD_MAX_QUEUE)
1367 tags = AHD_MAX_QUEUE;
1374 * Determines the queue depth for a given device.
1377 ahd_linux_device_queue_depth(struct scsi_device *sdev)
1379 struct ahd_devinfo devinfo;
1381 struct ahd_softc *ahd = *((struct ahd_softc **)sdev->host->hostdata);
1383 ahd_compile_devinfo(&devinfo,
1385 sdev->sdev_target->id, sdev->lun,
1386 sdev->sdev_target->channel == 0 ? 'A' : 'B',
1388 tags = ahd_linux_user_tagdepth(ahd, &devinfo);
1389 if (tags != 0 && sdev->tagged_supported != 0) {
1391 ahd_platform_set_tags(ahd, sdev, &devinfo, AHD_QUEUE_TAGGED);
1392 ahd_send_async(ahd, devinfo.channel, devinfo.target,
1393 devinfo.lun, AC_TRANSFER_NEG);
1394 ahd_print_devinfo(ahd, &devinfo);
1395 printf("Tagged Queuing enabled. Depth %d\n", tags);
1397 ahd_platform_set_tags(ahd, sdev, &devinfo, AHD_QUEUE_NONE);
1398 ahd_send_async(ahd, devinfo.channel, devinfo.target,
1399 devinfo.lun, AC_TRANSFER_NEG);
1404 ahd_linux_run_command(struct ahd_softc *ahd, struct ahd_linux_device *dev,
1405 struct scsi_cmnd *cmd)
1408 struct hardware_scb *hscb;
1409 struct ahd_initiator_tinfo *tinfo;
1410 struct ahd_tmode_tstate *tstate;
1413 unsigned long flags;
1416 ahd_lock(ahd, &flags);
1419 * Get an scb to use.
1421 tinfo = ahd_fetch_transinfo(ahd, 'A', ahd->our_id,
1422 cmd->device->id, &tstate);
1423 if ((dev->flags & (AHD_DEV_Q_TAGGED|AHD_DEV_Q_BASIC)) == 0
1424 || (tinfo->curr.ppr_options & MSG_EXT_PPR_IU_REQ) != 0) {
1425 col_idx = AHD_NEVER_COL_IDX;
1427 col_idx = AHD_BUILD_COL_IDX(cmd->device->id,
1430 if ((scb = ahd_get_scb(ahd, col_idx)) == NULL) {
1431 ahd->flags |= AHD_RESOURCE_SHORTAGE;
1432 ahd_unlock(ahd, &flags);
1433 return SCSI_MLQUEUE_HOST_BUSY;
1437 scb->platform_data->dev = dev;
1439 cmd->host_scribble = (char *)scb;
1442 * Fill out basics of the HSCB.
1445 hscb->scsiid = BUILD_SCSIID(ahd, cmd);
1446 hscb->lun = cmd->device->lun;
1447 scb->hscb->task_management = 0;
1448 mask = SCB_GET_TARGET_MASK(ahd, scb);
1450 if ((ahd->user_discenable & mask) != 0)
1451 hscb->control |= DISCENB;
1453 if ((tinfo->curr.ppr_options & MSG_EXT_PPR_IU_REQ) != 0)
1454 scb->flags |= SCB_PACKETIZED;
1456 if ((tstate->auto_negotiate & mask) != 0) {
1457 scb->flags |= SCB_AUTO_NEGOTIATE;
1458 scb->hscb->control |= MK_MESSAGE;
1461 if ((dev->flags & (AHD_DEV_Q_TAGGED|AHD_DEV_Q_BASIC)) != 0) {
1463 uint8_t tag_msgs[2];
1465 msg_bytes = scsi_populate_tag_msg(cmd, tag_msgs);
1466 if (msg_bytes && tag_msgs[0] != MSG_SIMPLE_TASK) {
1467 hscb->control |= tag_msgs[0];
1468 if (tag_msgs[0] == MSG_ORDERED_TASK)
1469 dev->commands_since_idle_or_otag = 0;
1471 if (dev->commands_since_idle_or_otag == AHD_OTAG_THRESH
1472 && (dev->flags & AHD_DEV_Q_TAGGED) != 0) {
1473 hscb->control |= MSG_ORDERED_TASK;
1474 dev->commands_since_idle_or_otag = 0;
1476 hscb->control |= MSG_SIMPLE_TASK;
1480 hscb->cdb_len = cmd->cmd_len;
1481 memcpy(hscb->shared_data.idata.cdb, cmd->cmnd, hscb->cdb_len);
1483 scb->platform_data->xfer_len = 0;
1484 ahd_set_residual(scb, 0);
1485 ahd_set_sense_residual(scb, 0);
1488 nseg = scsi_dma_map(cmd);
1491 void *sg = scb->sg_list;
1492 struct scatterlist *cur_seg;
1495 scb->platform_data->xfer_len = 0;
1497 scsi_for_each_sg(cmd, cur_seg, nseg, i) {
1501 addr = sg_dma_address(cur_seg);
1502 len = sg_dma_len(cur_seg);
1503 scb->platform_data->xfer_len += len;
1504 sg = ahd_sg_setup(ahd, scb, sg, addr, len,
1509 LIST_INSERT_HEAD(&ahd->pending_scbs, scb, pending_links);
1512 dev->commands_issued++;
1514 if ((dev->flags & AHD_DEV_PERIODIC_OTAG) != 0)
1515 dev->commands_since_idle_or_otag++;
1516 scb->flags |= SCB_ACTIVE;
1517 ahd_queue_scb(ahd, scb);
1519 ahd_unlock(ahd, &flags);
1525 * SCSI controller interrupt handler.
1528 ahd_linux_isr(int irq, void *dev_id)
1530 struct ahd_softc *ahd;
1534 ahd = (struct ahd_softc *) dev_id;
1535 ahd_lock(ahd, &flags);
1536 ours = ahd_intr(ahd);
1537 ahd_unlock(ahd, &flags);
1538 return IRQ_RETVAL(ours);
1542 ahd_send_async(struct ahd_softc *ahd, char channel,
1543 u_int target, u_int lun, ac_code code)
1546 case AC_TRANSFER_NEG:
1549 struct scsi_target *starget;
1550 struct info_str info;
1551 struct ahd_initiator_tinfo *tinfo;
1552 struct ahd_tmode_tstate *tstate;
1553 unsigned int target_ppr_options;
1555 BUG_ON(target == CAM_TARGET_WILDCARD);
1558 info.length = sizeof(buf);
1561 tinfo = ahd_fetch_transinfo(ahd, channel, ahd->our_id,
1565 * Don't bother reporting results while
1566 * negotiations are still pending.
1568 if (tinfo->curr.period != tinfo->goal.period
1569 || tinfo->curr.width != tinfo->goal.width
1570 || tinfo->curr.offset != tinfo->goal.offset
1571 || tinfo->curr.ppr_options != tinfo->goal.ppr_options)
1572 if (bootverbose == 0)
1576 * Don't bother reporting results that
1577 * are identical to those last reported.
1579 starget = ahd->platform_data->starget[target];
1580 if (starget == NULL)
1583 target_ppr_options =
1584 (spi_dt(starget) ? MSG_EXT_PPR_DT_REQ : 0)
1585 + (spi_qas(starget) ? MSG_EXT_PPR_QAS_REQ : 0)
1586 + (spi_iu(starget) ? MSG_EXT_PPR_IU_REQ : 0)
1587 + (spi_rd_strm(starget) ? MSG_EXT_PPR_RD_STRM : 0)
1588 + (spi_pcomp_en(starget) ? MSG_EXT_PPR_PCOMP_EN : 0)
1589 + (spi_rti(starget) ? MSG_EXT_PPR_RTI : 0)
1590 + (spi_wr_flow(starget) ? MSG_EXT_PPR_WR_FLOW : 0)
1591 + (spi_hold_mcs(starget) ? MSG_EXT_PPR_HOLD_MCS : 0);
1593 if (tinfo->curr.period == spi_period(starget)
1594 && tinfo->curr.width == spi_width(starget)
1595 && tinfo->curr.offset == spi_offset(starget)
1596 && tinfo->curr.ppr_options == target_ppr_options)
1597 if (bootverbose == 0)
1600 spi_period(starget) = tinfo->curr.period;
1601 spi_width(starget) = tinfo->curr.width;
1602 spi_offset(starget) = tinfo->curr.offset;
1603 spi_dt(starget) = tinfo->curr.ppr_options & MSG_EXT_PPR_DT_REQ ? 1 : 0;
1604 spi_qas(starget) = tinfo->curr.ppr_options & MSG_EXT_PPR_QAS_REQ ? 1 : 0;
1605 spi_iu(starget) = tinfo->curr.ppr_options & MSG_EXT_PPR_IU_REQ ? 1 : 0;
1606 spi_rd_strm(starget) = tinfo->curr.ppr_options & MSG_EXT_PPR_RD_STRM ? 1 : 0;
1607 spi_pcomp_en(starget) = tinfo->curr.ppr_options & MSG_EXT_PPR_PCOMP_EN ? 1 : 0;
1608 spi_rti(starget) = tinfo->curr.ppr_options & MSG_EXT_PPR_RTI ? 1 : 0;
1609 spi_wr_flow(starget) = tinfo->curr.ppr_options & MSG_EXT_PPR_WR_FLOW ? 1 : 0;
1610 spi_hold_mcs(starget) = tinfo->curr.ppr_options & MSG_EXT_PPR_HOLD_MCS ? 1 : 0;
1611 spi_display_xfer_agreement(starget);
1616 WARN_ON(lun != CAM_LUN_WILDCARD);
1617 scsi_report_device_reset(ahd->platform_data->host,
1618 channel - 'A', target);
1622 if (ahd->platform_data->host != NULL) {
1623 scsi_report_bus_reset(ahd->platform_data->host,
1628 panic("ahd_send_async: Unexpected async event");
1633 * Calls the higher level scsi done function and frees the scb.
1636 ahd_done(struct ahd_softc *ahd, struct scb *scb)
1638 struct scsi_cmnd *cmd;
1639 struct ahd_linux_device *dev;
1641 if ((scb->flags & SCB_ACTIVE) == 0) {
1642 printf("SCB %d done'd twice\n", SCB_GET_TAG(scb));
1643 ahd_dump_card_state(ahd);
1644 panic("Stopping for safety");
1646 LIST_REMOVE(scb, pending_links);
1648 dev = scb->platform_data->dev;
1651 if ((cmd->result & (CAM_DEV_QFRZN << 16)) != 0) {
1652 cmd->result &= ~(CAM_DEV_QFRZN << 16);
1655 ahd_linux_unmap_scb(ahd, scb);
1658 * Guard against stale sense data.
1659 * The Linux mid-layer assumes that sense
1660 * was retrieved anytime the first byte of
1661 * the sense buffer looks "sane".
1663 cmd->sense_buffer[0] = 0;
1664 if (ahd_get_transaction_status(scb) == CAM_REQ_INPROG) {
1665 uint32_t amount_xferred;
1668 ahd_get_transfer_length(scb) - ahd_get_residual(scb);
1669 if ((scb->flags & SCB_TRANSMISSION_ERROR) != 0) {
1671 if ((ahd_debug & AHD_SHOW_MISC) != 0) {
1672 ahd_print_path(ahd, scb);
1673 printf("Set CAM_UNCOR_PARITY\n");
1676 ahd_set_transaction_status(scb, CAM_UNCOR_PARITY);
1677 #ifdef AHD_REPORT_UNDERFLOWS
1679 * This code is disabled by default as some
1680 * clients of the SCSI system do not properly
1681 * initialize the underflow parameter. This
1682 * results in spurious termination of commands
1683 * that complete as expected (e.g. underflow is
1684 * allowed as command can return variable amounts
1687 } else if (amount_xferred < scb->io_ctx->underflow) {
1690 ahd_print_path(ahd, scb);
1692 for (i = 0; i < scb->io_ctx->cmd_len; i++)
1693 printf(" 0x%x", scb->io_ctx->cmnd[i]);
1695 ahd_print_path(ahd, scb);
1696 printf("Saw underflow (%ld of %ld bytes). "
1697 "Treated as error\n",
1698 ahd_get_residual(scb),
1699 ahd_get_transfer_length(scb));
1700 ahd_set_transaction_status(scb, CAM_DATA_RUN_ERR);
1703 ahd_set_transaction_status(scb, CAM_REQ_CMP);
1705 } else if (ahd_get_transaction_status(scb) == CAM_SCSI_STATUS_ERROR) {
1706 ahd_linux_handle_scsi_status(ahd, cmd->device, scb);
1709 if (dev->openings == 1
1710 && ahd_get_transaction_status(scb) == CAM_REQ_CMP
1711 && ahd_get_scsi_status(scb) != SCSI_STATUS_QUEUE_FULL)
1712 dev->tag_success_count++;
1714 * Some devices deal with temporary internal resource
1715 * shortages by returning queue full. When the queue
1716 * full occurrs, we throttle back. Slowly try to get
1717 * back to our previous queue depth.
1719 if ((dev->openings + dev->active) < dev->maxtags
1720 && dev->tag_success_count > AHD_TAG_SUCCESS_INTERVAL) {
1721 dev->tag_success_count = 0;
1725 if (dev->active == 0)
1726 dev->commands_since_idle_or_otag = 0;
1728 if ((scb->flags & SCB_RECOVERY_SCB) != 0) {
1729 printf("Recovery SCB completes\n");
1730 if (ahd_get_transaction_status(scb) == CAM_BDR_SENT
1731 || ahd_get_transaction_status(scb) == CAM_REQ_ABORTED)
1732 ahd_set_transaction_status(scb, CAM_CMD_TIMEOUT);
1734 if (ahd->platform_data->eh_done)
1735 complete(ahd->platform_data->eh_done);
1738 ahd_free_scb(ahd, scb);
1739 ahd_linux_queue_cmd_complete(ahd, cmd);
1743 ahd_linux_handle_scsi_status(struct ahd_softc *ahd,
1744 struct scsi_device *sdev, struct scb *scb)
1746 struct ahd_devinfo devinfo;
1747 struct ahd_linux_device *dev = scsi_transport_device_data(sdev);
1749 ahd_compile_devinfo(&devinfo,
1751 sdev->sdev_target->id, sdev->lun,
1752 sdev->sdev_target->channel == 0 ? 'A' : 'B',
1756 * We don't currently trust the mid-layer to
1757 * properly deal with queue full or busy. So,
1758 * when one occurs, we tell the mid-layer to
1759 * unconditionally requeue the command to us
1760 * so that we can retry it ourselves. We also
1761 * implement our own throttling mechanism so
1762 * we don't clobber the device with too many
1765 switch (ahd_get_scsi_status(scb)) {
1768 case SCSI_STATUS_CHECK_COND:
1769 case SCSI_STATUS_CMD_TERMINATED:
1771 struct scsi_cmnd *cmd;
1774 * Copy sense information to the OS's cmd
1775 * structure if it is available.
1778 if ((scb->flags & (SCB_SENSE|SCB_PKT_SENSE)) != 0) {
1779 struct scsi_status_iu_header *siu;
1783 if (scb->flags & SCB_SENSE) {
1784 sense_size = min(sizeof(struct scsi_sense_data)
1785 - ahd_get_sense_residual(scb),
1786 (u_long)SCSI_SENSE_BUFFERSIZE);
1790 * Copy only the sense data into the provided
1793 siu = (struct scsi_status_iu_header *)
1795 sense_size = min_t(size_t,
1796 scsi_4btoul(siu->sense_length),
1797 SCSI_SENSE_BUFFERSIZE);
1798 sense_offset = SIU_SENSE_OFFSET(siu);
1801 memset(cmd->sense_buffer, 0, SCSI_SENSE_BUFFERSIZE);
1802 memcpy(cmd->sense_buffer,
1803 ahd_get_sense_buf(ahd, scb)
1804 + sense_offset, sense_size);
1805 cmd->result |= (DRIVER_SENSE << 24);
1808 if (ahd_debug & AHD_SHOW_SENSE) {
1811 printf("Copied %d bytes of sense data at %d:",
1812 sense_size, sense_offset);
1813 for (i = 0; i < sense_size; i++) {
1816 printf("0x%x ", cmd->sense_buffer[i]);
1824 case SCSI_STATUS_QUEUE_FULL:
1826 * By the time the core driver has returned this
1827 * command, all other commands that were queued
1828 * to us but not the device have been returned.
1829 * This ensures that dev->active is equal to
1830 * the number of commands actually queued to
1833 dev->tag_success_count = 0;
1834 if (dev->active != 0) {
1836 * Drop our opening count to the number
1837 * of commands currently outstanding.
1841 if ((ahd_debug & AHD_SHOW_QFULL) != 0) {
1842 ahd_print_path(ahd, scb);
1843 printf("Dropping tag count to %d\n",
1847 if (dev->active == dev->tags_on_last_queuefull) {
1849 dev->last_queuefull_same_count++;
1851 * If we repeatedly see a queue full
1852 * at the same queue depth, this
1853 * device has a fixed number of tag
1854 * slots. Lock in this tag depth
1855 * so we stop seeing queue fulls from
1858 if (dev->last_queuefull_same_count
1859 == AHD_LOCK_TAGS_COUNT) {
1860 dev->maxtags = dev->active;
1861 ahd_print_path(ahd, scb);
1862 printf("Locking max tag count at %d\n",
1866 dev->tags_on_last_queuefull = dev->active;
1867 dev->last_queuefull_same_count = 0;
1869 ahd_set_transaction_status(scb, CAM_REQUEUE_REQ);
1870 ahd_set_scsi_status(scb, SCSI_STATUS_OK);
1871 ahd_platform_set_tags(ahd, sdev, &devinfo,
1872 (dev->flags & AHD_DEV_Q_BASIC)
1873 ? AHD_QUEUE_BASIC : AHD_QUEUE_TAGGED);
1877 * Drop down to a single opening, and treat this
1878 * as if the target returned BUSY SCSI status.
1881 ahd_platform_set_tags(ahd, sdev, &devinfo,
1882 (dev->flags & AHD_DEV_Q_BASIC)
1883 ? AHD_QUEUE_BASIC : AHD_QUEUE_TAGGED);
1884 ahd_set_scsi_status(scb, SCSI_STATUS_BUSY);
1889 ahd_linux_queue_cmd_complete(struct ahd_softc *ahd, struct scsi_cmnd *cmd)
1892 int new_status = DID_OK;
1893 int do_fallback = 0;
1897 * Map CAM error codes into Linux Error codes. We
1898 * avoid the conversion so that the DV code has the
1899 * full error information available when making
1900 * state change decisions.
1903 status = ahd_cmd_get_transaction_status(cmd);
1905 case CAM_REQ_INPROG:
1907 new_status = DID_OK;
1909 case CAM_AUTOSENSE_FAIL:
1910 new_status = DID_ERROR;
1912 case CAM_SCSI_STATUS_ERROR:
1913 scsi_status = ahd_cmd_get_scsi_status(cmd);
1915 switch(scsi_status) {
1916 case SCSI_STATUS_CMD_TERMINATED:
1917 case SCSI_STATUS_CHECK_COND:
1918 if ((cmd->result >> 24) != DRIVER_SENSE) {
1921 struct scsi_sense_data *sense;
1923 sense = (struct scsi_sense_data *)
1925 if (sense->extra_len >= 5 &&
1926 (sense->add_sense_code == 0x47
1927 || sense->add_sense_code == 0x48))
1935 case CAM_REQ_ABORTED:
1936 new_status = DID_ABORT;
1939 new_status = DID_BUS_BUSY;
1941 case CAM_REQ_INVALID:
1942 case CAM_PATH_INVALID:
1943 new_status = DID_BAD_TARGET;
1945 case CAM_SEL_TIMEOUT:
1946 new_status = DID_NO_CONNECT;
1948 case CAM_SCSI_BUS_RESET:
1950 new_status = DID_RESET;
1952 case CAM_UNCOR_PARITY:
1953 new_status = DID_PARITY;
1956 case CAM_CMD_TIMEOUT:
1957 new_status = DID_TIME_OUT;
1960 case CAM_REQ_CMP_ERR:
1961 case CAM_UNEXP_BUSFREE:
1962 case CAM_DATA_RUN_ERR:
1963 new_status = DID_ERROR;
1968 case CAM_SEQUENCE_FAIL:
1969 case CAM_CCB_LEN_ERR:
1970 case CAM_PROVIDE_FAIL:
1971 case CAM_REQ_TERMIO:
1972 case CAM_UNREC_HBA_ERROR:
1973 case CAM_REQ_TOO_BIG:
1974 new_status = DID_ERROR;
1976 case CAM_REQUEUE_REQ:
1977 new_status = DID_REQUEUE;
1980 /* We should never get here */
1981 new_status = DID_ERROR;
1986 printf("%s: device overrun (status %x) on %d:%d:%d\n",
1987 ahd_name(ahd), status, cmd->device->channel,
1988 cmd->device->id, cmd->device->lun);
1991 ahd_cmd_set_transaction_status(cmd, new_status);
1993 cmd->scsi_done(cmd);
1997 ahd_freeze_simq(struct ahd_softc *ahd)
1999 scsi_block_requests(ahd->platform_data->host);
2003 ahd_release_simq(struct ahd_softc *ahd)
2005 scsi_unblock_requests(ahd->platform_data->host);
2009 ahd_linux_queue_abort_cmd(struct scsi_cmnd *cmd)
2011 struct ahd_softc *ahd;
2012 struct ahd_linux_device *dev;
2013 struct scb *pending_scb;
2015 u_int active_scbptr;
2024 ahd_mode_state saved_modes;
2025 unsigned long flags;
2030 ahd = *(struct ahd_softc **)cmd->device->host->hostdata;
2032 scmd_printk(KERN_INFO, cmd,
2033 "Attempting to queue an ABORT message:");
2036 for (cdb_byte = 0; cdb_byte < cmd->cmd_len; cdb_byte++)
2037 printf(" 0x%x", cmd->cmnd[cdb_byte]);
2040 ahd_lock(ahd, &flags);
2043 * First determine if we currently own this command.
2044 * Start by searching the device queue. If not found
2045 * there, check the pending_scb list. If not found
2046 * at all, and the system wanted us to just abort the
2047 * command, return success.
2049 dev = scsi_transport_device_data(cmd->device);
2053 * No target device for this command exists,
2054 * so we must not still own the command.
2056 scmd_printk(KERN_INFO, cmd, "Is not an active device\n");
2062 * See if we can find a matching cmd in the pending list.
2064 LIST_FOREACH(pending_scb, &ahd->pending_scbs, pending_links) {
2065 if (pending_scb->io_ctx == cmd)
2069 if (pending_scb == NULL) {
2070 scmd_printk(KERN_INFO, cmd, "Command not found\n");
2074 if ((pending_scb->flags & SCB_RECOVERY_SCB) != 0) {
2076 * We can't queue two recovery actions using the same SCB
2083 * Ensure that the card doesn't do anything
2084 * behind our back. Also make sure that we
2085 * didn't "just" miss an interrupt that would
2088 was_paused = ahd_is_paused(ahd);
2089 ahd_pause_and_flushwork(ahd);
2092 if ((pending_scb->flags & SCB_ACTIVE) == 0) {
2093 scmd_printk(KERN_INFO, cmd, "Command already completed\n");
2097 printf("%s: At time of recovery, card was %spaused\n",
2098 ahd_name(ahd), was_paused ? "" : "not ");
2099 ahd_dump_card_state(ahd);
2101 disconnected = TRUE;
2102 if (ahd_search_qinfifo(ahd, cmd->device->id,
2103 cmd->device->channel + 'A',
2105 pending_scb->hscb->tag,
2106 ROLE_INITIATOR, CAM_REQ_ABORTED,
2107 SEARCH_COMPLETE) > 0) {
2108 printf("%s:%d:%d:%d: Cmd aborted from QINFIFO\n",
2109 ahd_name(ahd), cmd->device->channel,
2110 cmd->device->id, cmd->device->lun);
2115 saved_modes = ahd_save_modes(ahd);
2116 ahd_set_modes(ahd, AHD_MODE_SCSI, AHD_MODE_SCSI);
2117 last_phase = ahd_inb(ahd, LASTPHASE);
2118 saved_scbptr = ahd_get_scbptr(ahd);
2119 active_scbptr = saved_scbptr;
2120 if (disconnected && (ahd_inb(ahd, SEQ_FLAGS) & NOT_IDENTIFIED) == 0) {
2121 struct scb *bus_scb;
2123 bus_scb = ahd_lookup_scb(ahd, active_scbptr);
2124 if (bus_scb == pending_scb)
2125 disconnected = FALSE;
2129 * At this point, pending_scb is the scb associated with the
2130 * passed in command. That command is currently active on the
2131 * bus or is in the disconnected state.
2133 saved_scsiid = ahd_inb(ahd, SAVED_SCSIID);
2134 if (last_phase != P_BUSFREE
2135 && SCB_GET_TAG(pending_scb) == active_scbptr) {
2138 * We're active on the bus, so assert ATN
2139 * and hope that the target responds.
2141 pending_scb = ahd_lookup_scb(ahd, active_scbptr);
2142 pending_scb->flags |= SCB_RECOVERY_SCB|SCB_ABORT;
2143 ahd_outb(ahd, MSG_OUT, HOST_MSG);
2144 ahd_outb(ahd, SCSISIGO, last_phase|ATNO);
2145 scmd_printk(KERN_INFO, cmd, "Device is active, asserting ATN\n");
2147 } else if (disconnected) {
2150 * Actually re-queue this SCB in an attempt
2151 * to select the device before it reconnects.
2153 pending_scb->flags |= SCB_RECOVERY_SCB|SCB_ABORT;
2154 ahd_set_scbptr(ahd, SCB_GET_TAG(pending_scb));
2155 pending_scb->hscb->cdb_len = 0;
2156 pending_scb->hscb->task_attribute = 0;
2157 pending_scb->hscb->task_management = SIU_TASKMGMT_ABORT_TASK;
2159 if ((pending_scb->flags & SCB_PACKETIZED) != 0) {
2161 * Mark the SCB has having an outstanding
2162 * task management function. Should the command
2163 * complete normally before the task management
2164 * function can be sent, the host will be notified
2165 * to abort our requeued SCB.
2167 ahd_outb(ahd, SCB_TASK_MANAGEMENT,
2168 pending_scb->hscb->task_management);
2171 * If non-packetized, set the MK_MESSAGE control
2172 * bit indicating that we desire to send a message.
2173 * We also set the disconnected flag since there is
2174 * no guarantee that our SCB control byte matches
2175 * the version on the card. We don't want the
2176 * sequencer to abort the command thinking an
2177 * unsolicited reselection occurred.
2179 pending_scb->hscb->control |= MK_MESSAGE|DISCONNECTED;
2182 * The sequencer will never re-reference the
2183 * in-core SCB. To make sure we are notified
2184 * during reslection, set the MK_MESSAGE flag in
2185 * the card's copy of the SCB.
2187 ahd_outb(ahd, SCB_CONTROL,
2188 ahd_inb(ahd, SCB_CONTROL)|MK_MESSAGE);
2192 * Clear out any entries in the QINFIFO first
2193 * so we are the next SCB for this target
2196 ahd_search_qinfifo(ahd, cmd->device->id,
2197 cmd->device->channel + 'A', cmd->device->lun,
2198 SCB_LIST_NULL, ROLE_INITIATOR,
2199 CAM_REQUEUE_REQ, SEARCH_COMPLETE);
2200 ahd_qinfifo_requeue_tail(ahd, pending_scb);
2201 ahd_set_scbptr(ahd, saved_scbptr);
2202 ahd_print_path(ahd, pending_scb);
2203 printf("Device is disconnected, re-queuing SCB\n");
2206 scmd_printk(KERN_INFO, cmd, "Unable to deliver message\n");
2213 * Our assumption is that if we don't have the command, no
2214 * recovery action was required, so we return success. Again,
2215 * the semantics of the mid-layer recovery engine are not
2216 * well defined, so this may change in time.
2223 DECLARE_COMPLETION_ONSTACK(done);
2225 ahd->platform_data->eh_done = &done;
2226 ahd_unlock(ahd, &flags);
2228 printf("%s: Recovery code sleeping\n", ahd_name(ahd));
2229 if (!wait_for_completion_timeout(&done, 5 * HZ)) {
2230 ahd_lock(ahd, &flags);
2231 ahd->platform_data->eh_done = NULL;
2232 ahd_unlock(ahd, &flags);
2233 printf("%s: Timer Expired (active %d)\n",
2234 ahd_name(ahd), dev->active);
2237 printf("Recovery code awake\n");
2239 ahd_unlock(ahd, &flags);
2241 if (retval != SUCCESS)
2242 printf("%s: Command abort returning 0x%x\n",
2243 ahd_name(ahd), retval);
2248 static void ahd_linux_set_width(struct scsi_target *starget, int width)
2250 struct Scsi_Host *shost = dev_to_shost(starget->dev.parent);
2251 struct ahd_softc *ahd = *((struct ahd_softc **)shost->hostdata);
2252 struct ahd_devinfo devinfo;
2253 unsigned long flags;
2255 ahd_compile_devinfo(&devinfo, shost->this_id, starget->id, 0,
2256 starget->channel + 'A', ROLE_INITIATOR);
2257 ahd_lock(ahd, &flags);
2258 ahd_set_width(ahd, &devinfo, width, AHD_TRANS_GOAL, FALSE);
2259 ahd_unlock(ahd, &flags);
2262 static void ahd_linux_set_period(struct scsi_target *starget, int period)
2264 struct Scsi_Host *shost = dev_to_shost(starget->dev.parent);
2265 struct ahd_softc *ahd = *((struct ahd_softc **)shost->hostdata);
2266 struct ahd_tmode_tstate *tstate;
2267 struct ahd_initiator_tinfo *tinfo
2268 = ahd_fetch_transinfo(ahd,
2269 starget->channel + 'A',
2270 shost->this_id, starget->id, &tstate);
2271 struct ahd_devinfo devinfo;
2272 unsigned int ppr_options = tinfo->goal.ppr_options;
2274 unsigned long flags;
2275 unsigned long offset = tinfo->goal.offset;
2278 if ((ahd_debug & AHD_SHOW_DV) != 0)
2279 printf("%s: set period to %d\n", ahd_name(ahd), period);
2282 offset = MAX_OFFSET;
2287 if (spi_max_width(starget)) {
2288 ppr_options |= MSG_EXT_PPR_DT_REQ;
2290 ppr_options |= MSG_EXT_PPR_IU_REQ;
2295 dt = ppr_options & MSG_EXT_PPR_DT_REQ;
2297 ahd_compile_devinfo(&devinfo, shost->this_id, starget->id, 0,
2298 starget->channel + 'A', ROLE_INITIATOR);
2300 /* all PPR requests apart from QAS require wide transfers */
2301 if (ppr_options & ~MSG_EXT_PPR_QAS_REQ) {
2302 if (spi_width(starget) == 0)
2303 ppr_options &= MSG_EXT_PPR_QAS_REQ;
2306 ahd_find_syncrate(ahd, &period, &ppr_options,
2307 dt ? AHD_SYNCRATE_MAX : AHD_SYNCRATE_ULTRA2);
2309 ahd_lock(ahd, &flags);
2310 ahd_set_syncrate(ahd, &devinfo, period, offset,
2311 ppr_options, AHD_TRANS_GOAL, FALSE);
2312 ahd_unlock(ahd, &flags);
2315 static void ahd_linux_set_offset(struct scsi_target *starget, int offset)
2317 struct Scsi_Host *shost = dev_to_shost(starget->dev.parent);
2318 struct ahd_softc *ahd = *((struct ahd_softc **)shost->hostdata);
2319 struct ahd_tmode_tstate *tstate;
2320 struct ahd_initiator_tinfo *tinfo
2321 = ahd_fetch_transinfo(ahd,
2322 starget->channel + 'A',
2323 shost->this_id, starget->id, &tstate);
2324 struct ahd_devinfo devinfo;
2325 unsigned int ppr_options = 0;
2326 unsigned int period = 0;
2327 unsigned int dt = ppr_options & MSG_EXT_PPR_DT_REQ;
2328 unsigned long flags;
2331 if ((ahd_debug & AHD_SHOW_DV) != 0)
2332 printf("%s: set offset to %d\n", ahd_name(ahd), offset);
2335 ahd_compile_devinfo(&devinfo, shost->this_id, starget->id, 0,
2336 starget->channel + 'A', ROLE_INITIATOR);
2338 period = tinfo->goal.period;
2339 ppr_options = tinfo->goal.ppr_options;
2340 ahd_find_syncrate(ahd, &period, &ppr_options,
2341 dt ? AHD_SYNCRATE_MAX : AHD_SYNCRATE_ULTRA2);
2344 ahd_lock(ahd, &flags);
2345 ahd_set_syncrate(ahd, &devinfo, period, offset, ppr_options,
2346 AHD_TRANS_GOAL, FALSE);
2347 ahd_unlock(ahd, &flags);
2350 static void ahd_linux_set_dt(struct scsi_target *starget, int dt)
2352 struct Scsi_Host *shost = dev_to_shost(starget->dev.parent);
2353 struct ahd_softc *ahd = *((struct ahd_softc **)shost->hostdata);
2354 struct ahd_tmode_tstate *tstate;
2355 struct ahd_initiator_tinfo *tinfo
2356 = ahd_fetch_transinfo(ahd,
2357 starget->channel + 'A',
2358 shost->this_id, starget->id, &tstate);
2359 struct ahd_devinfo devinfo;
2360 unsigned int ppr_options = tinfo->goal.ppr_options
2361 & ~MSG_EXT_PPR_DT_REQ;
2362 unsigned int period = tinfo->goal.period;
2363 unsigned int width = tinfo->goal.width;
2364 unsigned long flags;
2367 if ((ahd_debug & AHD_SHOW_DV) != 0)
2368 printf("%s: %s DT\n", ahd_name(ahd),
2369 dt ? "enabling" : "disabling");
2371 if (dt && spi_max_width(starget)) {
2372 ppr_options |= MSG_EXT_PPR_DT_REQ;
2374 ahd_linux_set_width(starget, 1);
2377 period = 10; /* If resetting DT, period must be >= 25ns */
2378 /* IU is invalid without DT set */
2379 ppr_options &= ~MSG_EXT_PPR_IU_REQ;
2381 ahd_compile_devinfo(&devinfo, shost->this_id, starget->id, 0,
2382 starget->channel + 'A', ROLE_INITIATOR);
2383 ahd_find_syncrate(ahd, &period, &ppr_options,
2384 dt ? AHD_SYNCRATE_MAX : AHD_SYNCRATE_ULTRA2);
2386 ahd_lock(ahd, &flags);
2387 ahd_set_syncrate(ahd, &devinfo, period, tinfo->goal.offset,
2388 ppr_options, AHD_TRANS_GOAL, FALSE);
2389 ahd_unlock(ahd, &flags);
2392 static void ahd_linux_set_qas(struct scsi_target *starget, int qas)
2394 struct Scsi_Host *shost = dev_to_shost(starget->dev.parent);
2395 struct ahd_softc *ahd = *((struct ahd_softc **)shost->hostdata);
2396 struct ahd_tmode_tstate *tstate;
2397 struct ahd_initiator_tinfo *tinfo
2398 = ahd_fetch_transinfo(ahd,
2399 starget->channel + 'A',
2400 shost->this_id, starget->id, &tstate);
2401 struct ahd_devinfo devinfo;
2402 unsigned int ppr_options = tinfo->goal.ppr_options
2403 & ~MSG_EXT_PPR_QAS_REQ;
2404 unsigned int period = tinfo->goal.period;
2406 unsigned long flags;
2409 if ((ahd_debug & AHD_SHOW_DV) != 0)
2410 printf("%s: %s QAS\n", ahd_name(ahd),
2411 qas ? "enabling" : "disabling");
2415 ppr_options |= MSG_EXT_PPR_QAS_REQ;
2418 dt = ppr_options & MSG_EXT_PPR_DT_REQ;
2420 ahd_compile_devinfo(&devinfo, shost->this_id, starget->id, 0,
2421 starget->channel + 'A', ROLE_INITIATOR);
2422 ahd_find_syncrate(ahd, &period, &ppr_options,
2423 dt ? AHD_SYNCRATE_MAX : AHD_SYNCRATE_ULTRA2);
2425 ahd_lock(ahd, &flags);
2426 ahd_set_syncrate(ahd, &devinfo, period, tinfo->goal.offset,
2427 ppr_options, AHD_TRANS_GOAL, FALSE);
2428 ahd_unlock(ahd, &flags);
2431 static void ahd_linux_set_iu(struct scsi_target *starget, int iu)
2433 struct Scsi_Host *shost = dev_to_shost(starget->dev.parent);
2434 struct ahd_softc *ahd = *((struct ahd_softc **)shost->hostdata);
2435 struct ahd_tmode_tstate *tstate;
2436 struct ahd_initiator_tinfo *tinfo
2437 = ahd_fetch_transinfo(ahd,
2438 starget->channel + 'A',
2439 shost->this_id, starget->id, &tstate);
2440 struct ahd_devinfo devinfo;
2441 unsigned int ppr_options = tinfo->goal.ppr_options
2442 & ~MSG_EXT_PPR_IU_REQ;
2443 unsigned int period = tinfo->goal.period;
2445 unsigned long flags;
2448 if ((ahd_debug & AHD_SHOW_DV) != 0)
2449 printf("%s: %s IU\n", ahd_name(ahd),
2450 iu ? "enabling" : "disabling");
2453 if (iu && spi_max_width(starget)) {
2454 ppr_options |= MSG_EXT_PPR_IU_REQ;
2455 ppr_options |= MSG_EXT_PPR_DT_REQ; /* IU requires DT */
2458 dt = ppr_options & MSG_EXT_PPR_DT_REQ;
2460 ahd_compile_devinfo(&devinfo, shost->this_id, starget->id, 0,
2461 starget->channel + 'A', ROLE_INITIATOR);
2462 ahd_find_syncrate(ahd, &period, &ppr_options,
2463 dt ? AHD_SYNCRATE_MAX : AHD_SYNCRATE_ULTRA2);
2465 ahd_lock(ahd, &flags);
2466 ahd_set_syncrate(ahd, &devinfo, period, tinfo->goal.offset,
2467 ppr_options, AHD_TRANS_GOAL, FALSE);
2468 ahd_unlock(ahd, &flags);
2471 static void ahd_linux_set_rd_strm(struct scsi_target *starget, int rdstrm)
2473 struct Scsi_Host *shost = dev_to_shost(starget->dev.parent);
2474 struct ahd_softc *ahd = *((struct ahd_softc **)shost->hostdata);
2475 struct ahd_tmode_tstate *tstate;
2476 struct ahd_initiator_tinfo *tinfo
2477 = ahd_fetch_transinfo(ahd,
2478 starget->channel + 'A',
2479 shost->this_id, starget->id, &tstate);
2480 struct ahd_devinfo devinfo;
2481 unsigned int ppr_options = tinfo->goal.ppr_options
2482 & ~MSG_EXT_PPR_RD_STRM;
2483 unsigned int period = tinfo->goal.period;
2484 unsigned int dt = ppr_options & MSG_EXT_PPR_DT_REQ;
2485 unsigned long flags;
2488 if ((ahd_debug & AHD_SHOW_DV) != 0)
2489 printf("%s: %s Read Streaming\n", ahd_name(ahd),
2490 rdstrm ? "enabling" : "disabling");
2493 if (rdstrm && spi_max_width(starget))
2494 ppr_options |= MSG_EXT_PPR_RD_STRM;
2496 ahd_compile_devinfo(&devinfo, shost->this_id, starget->id, 0,
2497 starget->channel + 'A', ROLE_INITIATOR);
2498 ahd_find_syncrate(ahd, &period, &ppr_options,
2499 dt ? AHD_SYNCRATE_MAX : AHD_SYNCRATE_ULTRA2);
2501 ahd_lock(ahd, &flags);
2502 ahd_set_syncrate(ahd, &devinfo, period, tinfo->goal.offset,
2503 ppr_options, AHD_TRANS_GOAL, FALSE);
2504 ahd_unlock(ahd, &flags);
2507 static void ahd_linux_set_wr_flow(struct scsi_target *starget, int wrflow)
2509 struct Scsi_Host *shost = dev_to_shost(starget->dev.parent);
2510 struct ahd_softc *ahd = *((struct ahd_softc **)shost->hostdata);
2511 struct ahd_tmode_tstate *tstate;
2512 struct ahd_initiator_tinfo *tinfo
2513 = ahd_fetch_transinfo(ahd,
2514 starget->channel + 'A',
2515 shost->this_id, starget->id, &tstate);
2516 struct ahd_devinfo devinfo;
2517 unsigned int ppr_options = tinfo->goal.ppr_options
2518 & ~MSG_EXT_PPR_WR_FLOW;
2519 unsigned int period = tinfo->goal.period;
2520 unsigned int dt = ppr_options & MSG_EXT_PPR_DT_REQ;
2521 unsigned long flags;
2524 if ((ahd_debug & AHD_SHOW_DV) != 0)
2525 printf("%s: %s Write Flow Control\n", ahd_name(ahd),
2526 wrflow ? "enabling" : "disabling");
2529 if (wrflow && spi_max_width(starget))
2530 ppr_options |= MSG_EXT_PPR_WR_FLOW;
2532 ahd_compile_devinfo(&devinfo, shost->this_id, starget->id, 0,
2533 starget->channel + 'A', ROLE_INITIATOR);
2534 ahd_find_syncrate(ahd, &period, &ppr_options,
2535 dt ? AHD_SYNCRATE_MAX : AHD_SYNCRATE_ULTRA2);
2537 ahd_lock(ahd, &flags);
2538 ahd_set_syncrate(ahd, &devinfo, period, tinfo->goal.offset,
2539 ppr_options, AHD_TRANS_GOAL, FALSE);
2540 ahd_unlock(ahd, &flags);
2543 static void ahd_linux_set_rti(struct scsi_target *starget, int rti)
2545 struct Scsi_Host *shost = dev_to_shost(starget->dev.parent);
2546 struct ahd_softc *ahd = *((struct ahd_softc **)shost->hostdata);
2547 struct ahd_tmode_tstate *tstate;
2548 struct ahd_initiator_tinfo *tinfo
2549 = ahd_fetch_transinfo(ahd,
2550 starget->channel + 'A',
2551 shost->this_id, starget->id, &tstate);
2552 struct ahd_devinfo devinfo;
2553 unsigned int ppr_options = tinfo->goal.ppr_options
2555 unsigned int period = tinfo->goal.period;
2556 unsigned int dt = ppr_options & MSG_EXT_PPR_DT_REQ;
2557 unsigned long flags;
2559 if ((ahd->features & AHD_RTI) == 0) {
2561 if ((ahd_debug & AHD_SHOW_DV) != 0)
2562 printf("%s: RTI not available\n", ahd_name(ahd));
2568 if ((ahd_debug & AHD_SHOW_DV) != 0)
2569 printf("%s: %s RTI\n", ahd_name(ahd),
2570 rti ? "enabling" : "disabling");
2573 if (rti && spi_max_width(starget))
2574 ppr_options |= MSG_EXT_PPR_RTI;
2576 ahd_compile_devinfo(&devinfo, shost->this_id, starget->id, 0,
2577 starget->channel + 'A', ROLE_INITIATOR);
2578 ahd_find_syncrate(ahd, &period, &ppr_options,
2579 dt ? AHD_SYNCRATE_MAX : AHD_SYNCRATE_ULTRA2);
2581 ahd_lock(ahd, &flags);
2582 ahd_set_syncrate(ahd, &devinfo, period, tinfo->goal.offset,
2583 ppr_options, AHD_TRANS_GOAL, FALSE);
2584 ahd_unlock(ahd, &flags);
2587 static void ahd_linux_set_pcomp_en(struct scsi_target *starget, int pcomp)
2589 struct Scsi_Host *shost = dev_to_shost(starget->dev.parent);
2590 struct ahd_softc *ahd = *((struct ahd_softc **)shost->hostdata);
2591 struct ahd_tmode_tstate *tstate;
2592 struct ahd_initiator_tinfo *tinfo
2593 = ahd_fetch_transinfo(ahd,
2594 starget->channel + 'A',
2595 shost->this_id, starget->id, &tstate);
2596 struct ahd_devinfo devinfo;
2597 unsigned int ppr_options = tinfo->goal.ppr_options
2598 & ~MSG_EXT_PPR_PCOMP_EN;
2599 unsigned int period = tinfo->goal.period;
2600 unsigned int dt = ppr_options & MSG_EXT_PPR_DT_REQ;
2601 unsigned long flags;
2604 if ((ahd_debug & AHD_SHOW_DV) != 0)
2605 printf("%s: %s Precompensation\n", ahd_name(ahd),
2606 pcomp ? "Enable" : "Disable");
2609 if (pcomp && spi_max_width(starget)) {
2612 if (ahd->unit < ARRAY_SIZE(aic79xx_iocell_info)) {
2613 struct ahd_linux_iocell_opts *iocell_opts;
2615 iocell_opts = &aic79xx_iocell_info[ahd->unit];
2616 precomp = iocell_opts->precomp;
2618 precomp = AIC79XX_DEFAULT_PRECOMP;
2620 ppr_options |= MSG_EXT_PPR_PCOMP_EN;
2621 AHD_SET_PRECOMP(ahd, precomp);
2623 AHD_SET_PRECOMP(ahd, 0);
2626 ahd_compile_devinfo(&devinfo, shost->this_id, starget->id, 0,
2627 starget->channel + 'A', ROLE_INITIATOR);
2628 ahd_find_syncrate(ahd, &period, &ppr_options,
2629 dt ? AHD_SYNCRATE_MAX : AHD_SYNCRATE_ULTRA2);
2631 ahd_lock(ahd, &flags);
2632 ahd_set_syncrate(ahd, &devinfo, period, tinfo->goal.offset,
2633 ppr_options, AHD_TRANS_GOAL, FALSE);
2634 ahd_unlock(ahd, &flags);
2637 static void ahd_linux_set_hold_mcs(struct scsi_target *starget, int hold)
2639 struct Scsi_Host *shost = dev_to_shost(starget->dev.parent);
2640 struct ahd_softc *ahd = *((struct ahd_softc **)shost->hostdata);
2641 struct ahd_tmode_tstate *tstate;
2642 struct ahd_initiator_tinfo *tinfo
2643 = ahd_fetch_transinfo(ahd,
2644 starget->channel + 'A',
2645 shost->this_id, starget->id, &tstate);
2646 struct ahd_devinfo devinfo;
2647 unsigned int ppr_options = tinfo->goal.ppr_options
2648 & ~MSG_EXT_PPR_HOLD_MCS;
2649 unsigned int period = tinfo->goal.period;
2650 unsigned int dt = ppr_options & MSG_EXT_PPR_DT_REQ;
2651 unsigned long flags;
2653 if (hold && spi_max_width(starget))
2654 ppr_options |= MSG_EXT_PPR_HOLD_MCS;
2656 ahd_compile_devinfo(&devinfo, shost->this_id, starget->id, 0,
2657 starget->channel + 'A', ROLE_INITIATOR);
2658 ahd_find_syncrate(ahd, &period, &ppr_options,
2659 dt ? AHD_SYNCRATE_MAX : AHD_SYNCRATE_ULTRA2);
2661 ahd_lock(ahd, &flags);
2662 ahd_set_syncrate(ahd, &devinfo, period, tinfo->goal.offset,
2663 ppr_options, AHD_TRANS_GOAL, FALSE);
2664 ahd_unlock(ahd, &flags);
2667 static void ahd_linux_get_signalling(struct Scsi_Host *shost)
2669 struct ahd_softc *ahd = *(struct ahd_softc **)shost->hostdata;
2670 unsigned long flags;
2673 ahd_lock(ahd, &flags);
2675 mode = ahd_inb(ahd, SBLKCTL);
2677 ahd_unlock(ahd, &flags);
2680 spi_signalling(shost) = SPI_SIGNAL_LVD;
2681 else if (mode & ENAB20)
2682 spi_signalling(shost) = SPI_SIGNAL_SE;
2684 spi_signalling(shost) = SPI_SIGNAL_UNKNOWN;
2687 static struct spi_function_template ahd_linux_transport_functions = {
2688 .set_offset = ahd_linux_set_offset,
2690 .set_period = ahd_linux_set_period,
2692 .set_width = ahd_linux_set_width,
2694 .set_dt = ahd_linux_set_dt,
2696 .set_iu = ahd_linux_set_iu,
2698 .set_qas = ahd_linux_set_qas,
2700 .set_rd_strm = ahd_linux_set_rd_strm,
2702 .set_wr_flow = ahd_linux_set_wr_flow,
2704 .set_rti = ahd_linux_set_rti,
2706 .set_pcomp_en = ahd_linux_set_pcomp_en,
2708 .set_hold_mcs = ahd_linux_set_hold_mcs,
2710 .get_signalling = ahd_linux_get_signalling,
2714 ahd_linux_init(void)
2719 * If we've been passed any parameters, process them now.
2722 aic79xx_setup(aic79xx);
2724 ahd_linux_transport_template =
2725 spi_attach_transport(&ahd_linux_transport_functions);
2726 if (!ahd_linux_transport_template)
2729 scsi_transport_reserve_device(ahd_linux_transport_template,
2730 sizeof(struct ahd_linux_device));
2732 error = ahd_linux_pci_init();
2734 spi_release_transport(ahd_linux_transport_template);
2739 ahd_linux_exit(void)
2741 ahd_linux_pci_exit();
2742 spi_release_transport(ahd_linux_transport_template);
2745 module_init(ahd_linux_init);
2746 module_exit(ahd_linux_exit);