git.oblomov.eu Git - linux-2.6/blob - drivers/usb/serial/whiteheat.c

   1 /*
   2  * USB ConnectTech WhiteHEAT driver
   3  *
   4  *      Copyright (C) 2002
   5  *          Connect Tech Inc.
   6  *
   7  *      Copyright (C) 1999 - 2001
   8  *          Greg Kroah-Hartman (greg@kroah.com)
   9  *
  10  *      This program is free software; you can redistribute it and/or modify
  11  *      it under the terms of the GNU General Public License as published by
  12  *      the Free Software Foundation; either version 2 of the License, or
  13  *      (at your option) any later version.
  14  *
  15  * See Documentation/usb/usb-serial.txt for more information on using this driver
  16  *
  17  * (10/09/2002) Stuart MacDonald (stuartm@connecttech.com)
  18  *      Upgrade to full working driver
  19  *
  20  * (05/30/2001) gkh
  21  *      switched from using spinlock to a semaphore, which fixes lots of problems.
  22  *
  23  * (04/08/2001) gb
  24  *      Identify version on module load.
  25  *
  26  * 2001_Mar_19 gkh
  27  *      Fixed MOD_INC and MOD_DEC logic, the ability to open a port more
  28  *      than once, and the got the proper usb_device_id table entries so
  29  *      the driver works again.
  30  *
  31  * (11/01/2000) Adam J. Richter
  32  *      usb_device_id table support
  33  *
  34  * (10/05/2000) gkh
  35  *      Fixed bug with urb->dev not being set properly, now that the usb
  36  *      core needs it.
  37  *
  38  * (10/03/2000) smd
  39  *      firmware is improved to guard against crap sent to device
  40  *      firmware now replies CMD_FAILURE on bad things
  41  *      read_callback fix you provided for private info struct
  42  *      command_finished now indicates success or fail
  43  *      setup_port struct now packed to avoid gcc padding
  44  *      firmware uses 1 based port numbering, driver now handles that
  45  *
  46  * (09/11/2000) gkh
  47  *      Removed DEBUG #ifdefs with call to usb_serial_debug_data
  48  *
  49  * (07/19/2000) gkh
  50  *      Added module_init and module_exit functions to handle the fact that this
  51  *      driver is a loadable module now.
  52  *      Fixed bug with port->minor that was found by Al Borchers
  53  *
  54  * (07/04/2000) gkh
  55  *      Added support for port settings. Baud rate can now be changed. Line signals
  56  *      are not transferred to and from the tty layer yet, but things seem to be
  57  *      working well now.
  58  *
  59  * (05/04/2000) gkh
  60  *      First cut at open and close commands. Data can flow through the ports at
  61  *      default speeds now.
  62  *
  63  * (03/26/2000) gkh
  64  *      Split driver up into device specific pieces.
  65  *
  66  */
  67
  68 #include <linux/kernel.h>
  69 #include <linux/errno.h>
  70 #include <linux/init.h>
  71 #include <linux/slab.h>
  72 #include <linux/tty.h>
  73 #include <linux/tty_driver.h>
  74 #include <linux/tty_flip.h>
  75 #include <linux/module.h>
  76 #include <linux/spinlock.h>
  77 #include <linux/mutex.h>
  78 #include <asm/uaccess.h>
  79 #include <asm/termbits.h>
  80 #include <linux/usb.h>
  81 #include <linux/serial_reg.h>
  82 #include <linux/serial.h>
  83 #include <linux/usb/serial.h>
  84 #include "whiteheat_fw.h"               /* firmware for the ConnectTech WhiteHEAT device */
  85 #include "whiteheat.h"                  /* WhiteHEAT specific commands */
  86
  87 static int debug;
  88
  89 #ifndef CMSPAR
  90 #define CMSPAR 0
  91 #endif
  92
  93 /*
  94  * Version Information
  95  */
  96 #define DRIVER_VERSION "v2.0"
  97 #define DRIVER_AUTHOR "Greg Kroah-Hartman <greg@kroah.com>, Stuart MacDonald <stuartm@connecttech.com>"
  98 #define DRIVER_DESC "USB ConnectTech WhiteHEAT driver"
  99
 100 #define CONNECT_TECH_VENDOR_ID          0x0710
 101 #define CONNECT_TECH_FAKE_WHITE_HEAT_ID 0x0001
 102 #define CONNECT_TECH_WHITE_HEAT_ID      0x8001
 103
 104 /*
 105    ID tables for whiteheat are unusual, because we want to different
 106    things for different versions of the device.  Eventually, this
 107    will be doable from a single table.  But, for now, we define two
 108    separate ID tables, and then a third table that combines them
 109    just for the purpose of exporting the autoloading information.
 110 */
 111 static struct usb_device_id id_table_std [] = {
 112         { USB_DEVICE(CONNECT_TECH_VENDOR_ID, CONNECT_TECH_WHITE_HEAT_ID) },
 113         { }                                             /* Terminating entry */
 114 };
 115
 116 static struct usb_device_id id_table_prerenumeration [] = {
 117         { USB_DEVICE(CONNECT_TECH_VENDOR_ID, CONNECT_TECH_FAKE_WHITE_HEAT_ID) },
 118         { }                                             /* Terminating entry */
 119 };
 120
 121 static struct usb_device_id id_table_combined [] = {
 122         { USB_DEVICE(CONNECT_TECH_VENDOR_ID, CONNECT_TECH_WHITE_HEAT_ID) },
 123         { USB_DEVICE(CONNECT_TECH_VENDOR_ID, CONNECT_TECH_FAKE_WHITE_HEAT_ID) },
 124         { }                                             /* Terminating entry */
 125 };
 126
 127 MODULE_DEVICE_TABLE (usb, id_table_combined);
 128
 129 static struct usb_driver whiteheat_driver = {
 130         .name =         "whiteheat",
 131         .probe =        usb_serial_probe,
 132         .disconnect =   usb_serial_disconnect,
 133         .id_table =     id_table_combined,
 134         .no_dynamic_id =        1,
 135 };
 136
 137 /* function prototypes for the Connect Tech WhiteHEAT prerenumeration device */
 138 static int  whiteheat_firmware_download (struct usb_serial *serial, const struct usb_device_id *id);
 139 static int  whiteheat_firmware_attach   (struct usb_serial *serial);
 140
 141 /* function prototypes for the Connect Tech WhiteHEAT serial converter */
 142 static int  whiteheat_attach            (struct usb_serial *serial);
 143 static void whiteheat_shutdown          (struct usb_serial *serial);
 144 static int  whiteheat_open              (struct usb_serial_port *port, struct file *filp);
 145 static void whiteheat_close             (struct usb_serial_port *port, struct file *filp);
 146 static int  whiteheat_write             (struct usb_serial_port *port, const unsigned char *buf, int count);
 147 static int  whiteheat_write_room        (struct usb_serial_port *port);
 148 static int  whiteheat_ioctl             (struct usb_serial_port *port, struct file * file, unsigned int cmd, unsigned long arg);
 149 static void whiteheat_set_termios       (struct usb_serial_port *port, struct ktermios * old);
 150 static int  whiteheat_tiocmget          (struct usb_serial_port *port, struct file *file);
 151 static int  whiteheat_tiocmset          (struct usb_serial_port *port, struct file *file, unsigned int set, unsigned int clear);
 152 static void whiteheat_break_ctl         (struct usb_serial_port *port, int break_state);
 153 static int  whiteheat_chars_in_buffer   (struct usb_serial_port *port);
 154 static void whiteheat_throttle          (struct usb_serial_port *port);
 155 static void whiteheat_unthrottle        (struct usb_serial_port *port);
 156 static void whiteheat_read_callback     (struct urb *urb);
 157 static void whiteheat_write_callback    (struct urb *urb);
 158
 159 static struct usb_serial_driver whiteheat_fake_device = {
 160         .driver = {
 161                 .owner =        THIS_MODULE,
 162                 .name =         "whiteheatnofirm",
 163         },
 164         .description =          "Connect Tech - WhiteHEAT - (prerenumeration)",
 165         .usb_driver =           &whiteheat_driver,
 166         .id_table =             id_table_prerenumeration,
 167         .num_interrupt_in =     NUM_DONT_CARE,
 168         .num_bulk_in =          NUM_DONT_CARE,
 169         .num_bulk_out =         NUM_DONT_CARE,
 170         .num_ports =            1,
 171         .probe =                whiteheat_firmware_download,
 172         .attach =               whiteheat_firmware_attach,
 173 };
 174
 175 static struct usb_serial_driver whiteheat_device = {
 176         .driver = {
 177                 .owner =        THIS_MODULE,
 178                 .name =         "whiteheat",
 179         },
 180         .description =          "Connect Tech - WhiteHEAT",
 181         .usb_driver =           &whiteheat_driver,
 182         .id_table =             id_table_std,
 183         .num_interrupt_in =     NUM_DONT_CARE,
 184         .num_bulk_in =          NUM_DONT_CARE,
 185         .num_bulk_out =         NUM_DONT_CARE,
 186         .num_ports =            4,
 187         .attach =               whiteheat_attach,
 188         .shutdown =             whiteheat_shutdown,
 189         .open =                 whiteheat_open,
 190         .close =                whiteheat_close,
 191         .write =                whiteheat_write,
 192         .write_room =           whiteheat_write_room,
 193         .ioctl =                whiteheat_ioctl,
 194         .set_termios =          whiteheat_set_termios,
 195         .break_ctl =            whiteheat_break_ctl,
 196         .tiocmget =             whiteheat_tiocmget,
 197         .tiocmset =             whiteheat_tiocmset,
 198         .chars_in_buffer =      whiteheat_chars_in_buffer,
 199         .throttle =             whiteheat_throttle,
 200         .unthrottle =           whiteheat_unthrottle,
 201         .read_bulk_callback =   whiteheat_read_callback,
 202         .write_bulk_callback =  whiteheat_write_callback,
 203 };
 204
 205
 206 struct whiteheat_command_private {
 207         struct mutex            mutex;
 208         __u8                    port_running;
 209         __u8                    command_finished;
 210         wait_queue_head_t       wait_command;   /* for handling sleeping while waiting for a command to finish */
 211         __u8                    result_buffer[64];
 212 };
 213
 214
 215 #define THROTTLED               0x01
 216 #define ACTUALLY_THROTTLED      0x02
 217
 218 static int urb_pool_size = 8;
 219
 220 struct whiteheat_urb_wrap {
 221         struct list_head        list;
 222         struct urb              *urb;
 223 };
 224
 225 struct whiteheat_private {
 226         spinlock_t              lock;
 227         __u8                    flags;
 228         __u8                    mcr;
 229         struct list_head        rx_urbs_free;
 230         struct list_head        rx_urbs_submitted;
 231         struct list_head        rx_urb_q;
 232         struct work_struct      rx_work;
 233         struct usb_serial_port  *port;
 234         struct list_head        tx_urbs_free;
 235         struct list_head        tx_urbs_submitted;
 236         struct mutex            deathwarrant;
 237 };
 238
 239
 240 /* local function prototypes */
 241 static int start_command_port(struct usb_serial *serial);
 242 static void stop_command_port(struct usb_serial *serial);
 243 static void command_port_write_callback(struct urb *urb);
 244 static void command_port_read_callback(struct urb *urb);
 245
 246 static int start_port_read(struct usb_serial_port *port);
 247 static struct whiteheat_urb_wrap *urb_to_wrap(struct urb *urb, struct list_head *head);
 248 static struct list_head *list_first(struct list_head *head);
 249 static void rx_data_softint(struct work_struct *work);
 250
 251 static int firm_send_command(struct usb_serial_port *port, __u8 command, __u8 *data, __u8 datasize);
 252 static int firm_open(struct usb_serial_port *port);
 253 static int firm_close(struct usb_serial_port *port);
 254 static int firm_setup_port(struct usb_serial_port *port);
 255 static int firm_set_rts(struct usb_serial_port *port, __u8 onoff);
 256 static int firm_set_dtr(struct usb_serial_port *port, __u8 onoff);
 257 static int firm_set_break(struct usb_serial_port *port, __u8 onoff);
 258 static int firm_purge(struct usb_serial_port *port, __u8 rxtx);
 259 static int firm_get_dtr_rts(struct usb_serial_port *port);
 260 static int firm_report_tx_done(struct usb_serial_port *port);
 261
 262
 263 #define COMMAND_PORT            4
 264 #define COMMAND_TIMEOUT         (2*HZ)  /* 2 second timeout for a command */
 265 #define COMMAND_TIMEOUT_MS      2000
 266 #define CLOSING_DELAY           (30 * HZ)
 267
 268
 269 /*****************************************************************************
 270  * Connect Tech's White Heat prerenumeration driver functions
 271  *****************************************************************************/
 272
 273 /* steps to download the firmware to the WhiteHEAT device:
 274  - hold the reset (by writing to the reset bit of the CPUCS register)
 275  - download the VEND_AX.HEX file to the chip using VENDOR_REQUEST-ANCHOR_LOAD
 276  - release the reset (by writing to the CPUCS register)
 277  - download the WH.HEX file for all addresses greater than 0x1b3f using
 278    VENDOR_REQUEST-ANCHOR_EXTERNAL_RAM_LOAD
 279  - hold the reset
 280  - download the WH.HEX file for all addresses less than 0x1b40 using
 281    VENDOR_REQUEST_ANCHOR_LOAD
 282  - release the reset
 283  - device renumerated itself and comes up as new device id with all
 284    firmware download completed.
 285 */
 286 static int whiteheat_firmware_download (struct usb_serial *serial, const struct usb_device_id *id)
 287 {
 288         int response;
 289         const struct whiteheat_hex_record *record;
 290
 291         dbg("%s", __FUNCTION__);
 292
 293         response = ezusb_set_reset (serial, 1);
 294
 295         record = &whiteheat_loader[0];
 296         while (record->address != 0xffff) {
 297                 response = ezusb_writememory (serial, record->address,
 298                                 (unsigned char *)record->data, record->data_size, 0xa0);
 299                 if (response < 0) {
 300                         err("%s - ezusb_writememory failed for loader (%d %04X %p %d)",
 301                                 __FUNCTION__, response, record->address, record->data, record->data_size);
 302                         break;
 303                 }
 304                 ++record;
 305         }
 306
 307         response = ezusb_set_reset (serial, 0);
 308
 309         record = &whiteheat_firmware[0];
 310         while (record->address < 0x1b40) {
 311                 ++record;
 312         }
 313         while (record->address != 0xffff) {
 314                 response = ezusb_writememory (serial, record->address,
 315                                 (unsigned char *)record->data, record->data_size, 0xa3);
 316                 if (response < 0) {
 317                         err("%s - ezusb_writememory failed for first firmware step (%d %04X %p %d)",
 318                                 __FUNCTION__, response, record->address, record->data, record->data_size);
 319                         break;
 320                 }
 321                 ++record;
 322         }
 323
 324         response = ezusb_set_reset (serial, 1);
 325
 326         record = &whiteheat_firmware[0];
 327         while (record->address < 0x1b40) {
 328                 response = ezusb_writememory (serial, record->address,
 329                                 (unsigned char *)record->data, record->data_size, 0xa0);
 330                 if (response < 0) {
 331                         err("%s - ezusb_writememory failed for second firmware step (%d %04X %p %d)",
 332                                 __FUNCTION__, response, record->address, record->data, record->data_size);
 333                         break;
 334                 }
 335                 ++record;
 336         }
 337
 338         response = ezusb_set_reset (serial, 0);
 339
 340         return 0;
 341 }
 342
 343
 344 static int whiteheat_firmware_attach (struct usb_serial *serial)
 345 {
 346         /* We want this device to fail to have a driver assigned to it */
 347         return 1;
 348 }
 349
 350
 351 /*****************************************************************************
 352  * Connect Tech's White Heat serial driver functions
 353  *****************************************************************************/
 354 static int whiteheat_attach (struct usb_serial *serial)
 355 {
 356         struct usb_serial_port *command_port;
 357         struct whiteheat_command_private *command_info;
 358         struct usb_serial_port *port;
 359         struct whiteheat_private *info;
 360         struct whiteheat_hw_info *hw_info;
 361         int pipe;
 362         int ret;
 363         int alen;
 364         __u8 *command;
 365         __u8 *result;
 366         int i;
 367         int j;
 368         struct urb *urb;
 369         int buf_size;
 370         struct whiteheat_urb_wrap *wrap;
 371         struct list_head *tmp;
 372
 373         command_port = serial->port[COMMAND_PORT];
 374
 375         pipe = usb_sndbulkpipe (serial->dev, command_port->bulk_out_endpointAddress);
 376         command = kmalloc(2, GFP_KERNEL);
 377         if (!command)
 378                 goto no_command_buffer;
 379         command[0] = WHITEHEAT_GET_HW_INFO;
 380         command[1] = 0;
 381
 382         result = kmalloc(sizeof(*hw_info) + 1, GFP_KERNEL);
 383         if (!result)
 384                 goto no_result_buffer;
 385         /*
 386          * When the module is reloaded the firmware is still there and
 387          * the endpoints are still in the usb core unchanged. This is the
 388          * unlinking bug in disguise. Same for the call below.
 389          */
 390         usb_clear_halt(serial->dev, pipe);
 391         ret = usb_bulk_msg (serial->dev, pipe, command, 2, &alen, COMMAND_TIMEOUT_MS);
 392         if (ret) {
 393                 err("%s: Couldn't send command [%d]", serial->type->description, ret);
 394                 goto no_firmware;
 395         } else if (alen != 2) {
 396                 err("%s: Send command incomplete [%d]", serial->type->description, alen);
 397                 goto no_firmware;
 398         }
 399
 400         pipe = usb_rcvbulkpipe (serial->dev, command_port->bulk_in_endpointAddress);
 401         /* See the comment on the usb_clear_halt() above */
 402         usb_clear_halt(serial->dev, pipe);
 403         ret = usb_bulk_msg (serial->dev, pipe, result, sizeof(*hw_info) + 1, &alen, COMMAND_TIMEOUT_MS);
 404         if (ret) {
 405                 err("%s: Couldn't get results [%d]", serial->type->description, ret);
 406                 goto no_firmware;
 407         } else if (alen != sizeof(*hw_info) + 1) {
 408                 err("%s: Get results incomplete [%d]", serial->type->description, alen);
 409                 goto no_firmware;
 410         } else if (result[0] != command[0]) {
 411                 err("%s: Command failed [%d]", serial->type->description, result[0]);
 412                 goto no_firmware;
 413         }
 414
 415         hw_info = (struct whiteheat_hw_info *)&result[1];
 416
 417         info("%s: Driver %s: Firmware v%d.%02d", serial->type->description,
 418              DRIVER_VERSION, hw_info->sw_major_rev, hw_info->sw_minor_rev);
 419
 420         for (i = 0; i < serial->num_ports; i++) {
 421                 port = serial->port[i];
 422
 423                 info = kmalloc(sizeof(struct whiteheat_private), GFP_KERNEL);
 424                 if (info == NULL) {
 425                         err("%s: Out of memory for port structures\n", serial->type->description);
 426                         goto no_private;
 427                 }
 428
 429                 spin_lock_init(&info->lock);
 430                 mutex_init(&info->deathwarrant);
 431                 info->flags = 0;
 432                 info->mcr = 0;
 433                 INIT_WORK(&info->rx_work, rx_data_softint);
 434                 info->port = port;
 435
 436                 INIT_LIST_HEAD(&info->rx_urbs_free);
 437                 INIT_LIST_HEAD(&info->rx_urbs_submitted);
 438                 INIT_LIST_HEAD(&info->rx_urb_q);
 439                 INIT_LIST_HEAD(&info->tx_urbs_free);
 440                 INIT_LIST_HEAD(&info->tx_urbs_submitted);
 441
 442                 for (j = 0; j < urb_pool_size; j++) {
 443                         urb = usb_alloc_urb(0, GFP_KERNEL);
 444                         if (!urb) {
 445                                 err("No free urbs available");
 446                                 goto no_rx_urb;
 447                         }
 448                         buf_size = port->read_urb->transfer_buffer_length;
 449                         urb->transfer_buffer = kmalloc(buf_size, GFP_KERNEL);
 450                         if (!urb->transfer_buffer) {
 451                                 err("Couldn't allocate urb buffer");
 452                                 goto no_rx_buf;
 453                         }
 454                         wrap = kmalloc(sizeof(*wrap), GFP_KERNEL);
 455                         if (!wrap) {
 456                                 err("Couldn't allocate urb wrapper");
 457                                 goto no_rx_wrap;
 458                         }
 459                         usb_fill_bulk_urb(urb, serial->dev,
 460                                         usb_rcvbulkpipe(serial->dev,
 461                                                 port->bulk_in_endpointAddress),
 462                                         urb->transfer_buffer, buf_size,
 463                                         whiteheat_read_callback, port);
 464                         wrap->urb = urb;
 465                         list_add(&wrap->list, &info->rx_urbs_free);
 466
 467                         urb = usb_alloc_urb(0, GFP_KERNEL);
 468                         if (!urb) {
 469                                 err("No free urbs available");
 470                                 goto no_tx_urb;
 471                         }
 472                         buf_size = port->write_urb->transfer_buffer_length;
 473                         urb->transfer_buffer = kmalloc(buf_size, GFP_KERNEL);
 474                         if (!urb->transfer_buffer) {
 475                                 err("Couldn't allocate urb buffer");
 476                                 goto no_tx_buf;
 477                         }
 478                         wrap = kmalloc(sizeof(*wrap), GFP_KERNEL);
 479                         if (!wrap) {
 480                                 err("Couldn't allocate urb wrapper");
 481                                 goto no_tx_wrap;
 482                         }
 483                         usb_fill_bulk_urb(urb, serial->dev,
 484                                         usb_sndbulkpipe(serial->dev,
 485                                                 port->bulk_out_endpointAddress),
 486                                         urb->transfer_buffer, buf_size,
 487                                         whiteheat_write_callback, port);
 488                         wrap->urb = urb;
 489                         list_add(&wrap->list, &info->tx_urbs_free);
 490                 }
 491
 492                 usb_set_serial_port_data(port, info);
 493         }
 494
 495         command_info = kmalloc(sizeof(struct whiteheat_command_private), GFP_KERNEL);
 496         if (command_info == NULL) {
 497                 err("%s: Out of memory for port structures\n", serial->type->description);
 498                 goto no_command_private;
 499         }
 500
 501         mutex_init(&command_info->mutex);
 502         command_info->port_running = 0;
 503         init_waitqueue_head(&command_info->wait_command);
 504         usb_set_serial_port_data(command_port, command_info);
 505         command_port->write_urb->complete = command_port_write_callback;
 506         command_port->read_urb->complete = command_port_read_callback;
 507         kfree(result);
 508         kfree(command);
 509
 510         return 0;
 511
 512 no_firmware:
 513         /* Firmware likely not running */
 514         err("%s: Unable to retrieve firmware version, try replugging\n", serial->type->description);
 515         err("%s: If the firmware is not running (status led not blinking)\n", serial->type->description);
 516         err("%s: please contact support@connecttech.com\n", serial->type->description);
 517         kfree(result);
 518         return -ENODEV;
 519
 520 no_command_private:
 521         for (i = serial->num_ports - 1; i >= 0; i--) {
 522                 port = serial->port[i];
 523                 info = usb_get_serial_port_data(port);
 524                 for (j = urb_pool_size - 1; j >= 0; j--) {
 525                         tmp = list_first(&info->tx_urbs_free);
 526                         list_del(tmp);
 527                         wrap = list_entry(tmp, struct whiteheat_urb_wrap, list);
 528                         urb = wrap->urb;
 529                         kfree(wrap);
 530 no_tx_wrap:
 531                         kfree(urb->transfer_buffer);
 532 no_tx_buf:
 533                         usb_free_urb(urb);
 534 no_tx_urb:
 535                         tmp = list_first(&info->rx_urbs_free);
 536                         list_del(tmp);
 537                         wrap = list_entry(tmp, struct whiteheat_urb_wrap, list);
 538                         urb = wrap->urb;
 539                         kfree(wrap);
 540 no_rx_wrap:
 541                         kfree(urb->transfer_buffer);
 542 no_rx_buf:
 543                         usb_free_urb(urb);
 544 no_rx_urb:
 545                         ;
 546                 }
 547                 kfree(info);
 548 no_private:
 549                 ;
 550         }
 551         kfree(result);
 552 no_result_buffer:
 553         kfree(command);
 554 no_command_buffer:
 555         return -ENOMEM;
 556 }
 557
 558
 559 static void whiteheat_shutdown (struct usb_serial *serial)
 560 {
 561         struct usb_serial_port *command_port;
 562         struct usb_serial_port *port;
 563         struct whiteheat_private *info;
 564         struct whiteheat_urb_wrap *wrap;
 565         struct urb *urb;
 566         struct list_head *tmp;
 567         struct list_head *tmp2;
 568         int i;
 569
 570         dbg("%s", __FUNCTION__);
 571
 572         /* free up our private data for our command port */
 573         command_port = serial->port[COMMAND_PORT];
 574         kfree (usb_get_serial_port_data(command_port));
 575
 576         for (i = 0; i < serial->num_ports; i++) {
 577                 port = serial->port[i];
 578                 info = usb_get_serial_port_data(port);
 579                 list_for_each_safe(tmp, tmp2, &info->rx_urbs_free) {
 580                         list_del(tmp);
 581                         wrap = list_entry(tmp, struct whiteheat_urb_wrap, list);
 582                         urb = wrap->urb;
 583                         kfree(wrap);
 584                         kfree(urb->transfer_buffer);
 585                         usb_free_urb(urb);
 586                 }
 587                 list_for_each_safe(tmp, tmp2, &info->tx_urbs_free) {
 588                         list_del(tmp);
 589                         wrap = list_entry(tmp, struct whiteheat_urb_wrap, list);
 590                         urb = wrap->urb;
 591                         kfree(wrap);
 592                         kfree(urb->transfer_buffer);
 593                         usb_free_urb(urb);
 594                 }
 595                 kfree(info);
 596         }
 597
 598         return;
 599 }
 600
 601
 602 static int whiteheat_open (struct usb_serial_port *port, struct file *filp)
 603 {
 604         int             retval = 0;
 605         struct ktermios old_term;
 606
 607         dbg("%s - port %d", __FUNCTION__, port->number);
 608
 609         retval = start_command_port(port->serial);
 610         if (retval)
 611                 goto exit;
 612
 613         port->tty->low_latency = 1;
 614
 615         /* send an open port command */
 616         retval = firm_open(port);
 617         if (retval) {
 618                 stop_command_port(port->serial);
 619                 goto exit;
 620         }
 621
 622         retval = firm_purge(port, WHITEHEAT_PURGE_RX | WHITEHEAT_PURGE_TX);
 623         if (retval) {
 624                 firm_close(port);
 625                 stop_command_port(port->serial);
 626                 goto exit;
 627         }
 628
 629         old_term.c_cflag = ~port->tty->termios->c_cflag;
 630         old_term.c_iflag = ~port->tty->termios->c_iflag;
 631         whiteheat_set_termios(port, &old_term);
 632
 633         /* Work around HCD bugs */
 634         usb_clear_halt(port->serial->dev, port->read_urb->pipe);
 635         usb_clear_halt(port->serial->dev, port->write_urb->pipe);
 636
 637         /* Start reading from the device */
 638         retval = start_port_read(port);
 639         if (retval) {
 640                 err("%s - failed submitting read urb, error %d", __FUNCTION__, retval);
 641                 firm_close(port);
 642                 stop_command_port(port->serial);
 643                 goto exit;
 644         }
 645
 646 exit:
 647         dbg("%s - exit, retval = %d", __FUNCTION__, retval);
 648         return retval;
 649 }
 650
 651
 652 static void whiteheat_close(struct usb_serial_port *port, struct file * filp)
 653 {
 654         struct whiteheat_private *info = usb_get_serial_port_data(port);
 655         struct whiteheat_urb_wrap *wrap;
 656         struct urb *urb;
 657         struct list_head *tmp;
 658         struct list_head *tmp2;
 659
 660         dbg("%s - port %d", __FUNCTION__, port->number);
 661
 662         mutex_lock(&port->serial->disc_mutex);
 663         /* filp is NULL when called from usb_serial_disconnect */
 664         if ((filp && (tty_hung_up_p(filp))) || port->serial->disconnected) {
 665                 mutex_unlock(&port->serial->disc_mutex);
 666                 return;
 667         }
 668         mutex_unlock(&port->serial->disc_mutex);
 669
 670         port->tty->closing = 1;
 671
 672 /*
 673  * Not currently in use; tty_wait_until_sent() calls
 674  * serial_chars_in_buffer() which deadlocks on the second semaphore
 675  * acquisition. This should be fixed at some point. Greg's been
 676  * notified.
 677         if ((filp->f_flags & (O_NDELAY | O_NONBLOCK)) == 0) {
 678                 tty_wait_until_sent(port->tty, CLOSING_DELAY);
 679         }
 680 */
 681
 682         if (port->tty->driver->flush_buffer)
 683                 port->tty->driver->flush_buffer(port->tty);
 684         tty_ldisc_flush(port->tty);
 685
 686         firm_report_tx_done(port);
 687
 688         firm_close(port);
 689
 690 printk(KERN_ERR"Before processing rx_urbs_submitted.\n");
 691         /* shutdown our bulk reads and writes */
 692         mutex_lock(&info->deathwarrant);
 693         spin_lock_irq(&info->lock);
 694         list_for_each_safe(tmp, tmp2, &info->rx_urbs_submitted) {
 695                 wrap = list_entry(tmp, struct whiteheat_urb_wrap, list);
 696                 urb = wrap->urb;
 697                 list_del(tmp);
 698                 spin_unlock_irq(&info->lock);
 699                 usb_kill_urb(urb);
 700                 spin_lock_irq(&info->lock);
 701                 list_add(tmp, &info->rx_urbs_free);
 702         }
 703         list_for_each_safe(tmp, tmp2, &info->rx_urb_q)
 704                 list_move(tmp, &info->rx_urbs_free);
 705         list_for_each_safe(tmp, tmp2, &info->tx_urbs_submitted) {
 706                 wrap = list_entry(tmp, struct whiteheat_urb_wrap, list);
 707                 urb = wrap->urb;
 708                 list_del(tmp);
 709                 spin_unlock_irq(&info->lock);
 710                 usb_kill_urb(urb);
 711                 spin_lock_irq(&info->lock);
 712                 list_add(tmp, &info->tx_urbs_free);
 713         }
 714         spin_unlock_irq(&info->lock);
 715         mutex_unlock(&info->deathwarrant);
 716
 717         stop_command_port(port->serial);
 718
 719         port->tty->closing = 0;
 720 }
 721
 722
 723 static int whiteheat_write(struct usb_serial_port *port, const unsigned char *buf, int count)
 724 {
 725         struct usb_serial *serial = port->serial;
 726         struct whiteheat_private *info = usb_get_serial_port_data(port);
 727         struct whiteheat_urb_wrap *wrap;
 728         struct urb *urb;
 729         int result;
 730         int bytes;
 731         int sent = 0;
 732         unsigned long flags;
 733         struct list_head *tmp;
 734
 735         dbg("%s - port %d", __FUNCTION__, port->number);
 736
 737         if (count == 0) {
 738                 dbg("%s - write request of 0 bytes", __FUNCTION__);
 739                 return (0);
 740         }
 741
 742         while (count) {
 743                 spin_lock_irqsave(&info->lock, flags);
 744                 if (list_empty(&info->tx_urbs_free)) {
 745                         spin_unlock_irqrestore(&info->lock, flags);
 746                         break;
 747                 }
 748                 tmp = list_first(&info->tx_urbs_free);
 749                 list_del(tmp);
 750                 spin_unlock_irqrestore(&info->lock, flags);
 751
 752                 wrap = list_entry(tmp, struct whiteheat_urb_wrap, list);
 753                 urb = wrap->urb;
 754                 bytes = (count > port->bulk_out_size) ? port->bulk_out_size : count;
 755                 memcpy (urb->transfer_buffer, buf + sent, bytes);
 756
 757                 usb_serial_debug_data(debug, &port->dev, __FUNCTION__, bytes, urb->transfer_buffer);
 758
 759                 urb->dev = serial->dev;
 760                 urb->transfer_buffer_length = bytes;
 761                 result = usb_submit_urb(urb, GFP_ATOMIC);
 762                 if (result) {
 763                         err("%s - failed submitting write urb, error %d", __FUNCTION__, result);
 764                         sent = result;
 765                         spin_lock_irqsave(&info->lock, flags);
 766                         list_add(tmp, &info->tx_urbs_free);
 767                         spin_unlock_irqrestore(&info->lock, flags);
 768                         break;
 769                 } else {
 770                         sent += bytes;
 771                         count -= bytes;
 772                         spin_lock_irqsave(&info->lock, flags);
 773                         list_add(tmp, &info->tx_urbs_submitted);
 774                         spin_unlock_irqrestore(&info->lock, flags);
 775                 }
 776         }
 777
 778         return sent;
 779 }
 780
 781
 782 static int whiteheat_write_room(struct usb_serial_port *port)
 783 {
 784         struct whiteheat_private *info = usb_get_serial_port_data(port);
 785         struct list_head *tmp;
 786         int room = 0;
 787         unsigned long flags;
 788
 789         dbg("%s - port %d", __FUNCTION__, port->number);
 790
 791         spin_lock_irqsave(&info->lock, flags);
 792         list_for_each(tmp, &info->tx_urbs_free)
 793                 room++;
 794         spin_unlock_irqrestore(&info->lock, flags);
 795         room *= port->bulk_out_size;
 796
 797         dbg("%s - returns %d", __FUNCTION__, room);
 798         return (room);
 799 }
 800
 801
 802 static int whiteheat_tiocmget (struct usb_serial_port *port, struct file *file)
 803 {
 804         struct whiteheat_private *info = usb_get_serial_port_data(port);
 805         unsigned int modem_signals = 0;
 806
 807         dbg("%s - port %d", __FUNCTION__, port->number);
 808
 809         firm_get_dtr_rts(port);
 810         if (info->mcr & UART_MCR_DTR)
 811                 modem_signals |= TIOCM_DTR;
 812         if (info->mcr & UART_MCR_RTS)
 813                 modem_signals |= TIOCM_RTS;
 814
 815         return modem_signals;
 816 }
 817
 818
 819 static int whiteheat_tiocmset (struct usb_serial_port *port, struct file *file,
 820                                unsigned int set, unsigned int clear)
 821 {
 822         struct whiteheat_private *info = usb_get_serial_port_data(port);
 823
 824         dbg("%s - port %d", __FUNCTION__, port->number);
 825
 826         if (set & TIOCM_RTS)
 827                 info->mcr |= UART_MCR_RTS;
 828         if (set & TIOCM_DTR)
 829                 info->mcr |= UART_MCR_DTR;
 830
 831         if (clear & TIOCM_RTS)
 832                 info->mcr &= ~UART_MCR_RTS;
 833         if (clear & TIOCM_DTR)
 834                 info->mcr &= ~UART_MCR_DTR;
 835
 836         firm_set_dtr(port, info->mcr & UART_MCR_DTR);
 837         firm_set_rts(port, info->mcr & UART_MCR_RTS);
 838         return 0;
 839 }
 840
 841
 842 static int whiteheat_ioctl (struct usb_serial_port *port, struct file * file, unsigned int cmd, unsigned long arg)
 843 {
 844         struct serial_struct serstruct;
 845         void __user *user_arg = (void __user *)arg;
 846
 847         dbg("%s - port %d, cmd 0x%.4x", __FUNCTION__, port->number, cmd);
 848
 849         switch (cmd) {
 850                 case TIOCGSERIAL:
 851                         memset(&serstruct, 0, sizeof(serstruct));
 852                         serstruct.type = PORT_16654;
 853                         serstruct.line = port->serial->minor;
 854                         serstruct.port = port->number;
 855                         serstruct.flags = ASYNC_SKIP_TEST | ASYNC_AUTO_IRQ;
 856                         serstruct.xmit_fifo_size = port->bulk_out_size;
 857                         serstruct.custom_divisor = 0;
 858                         serstruct.baud_base = 460800;
 859                         serstruct.close_delay = CLOSING_DELAY;
 860                         serstruct.closing_wait = CLOSING_DELAY;
 861
 862                         if (copy_to_user(user_arg, &serstruct, sizeof(serstruct)))
 863                                 return -EFAULT;
 864
 865                         break;
 866
 867                 case TIOCSSERIAL:
 868                         if (copy_from_user(&serstruct, user_arg, sizeof(serstruct)))
 869                                 return -EFAULT;
 870
 871                         /*
 872                          * For now this is ignored. dip sets the ASYNC_[V]HI flags
 873                          * but this isn't used by us at all. Maybe someone somewhere
 874                          * will need the custom_divisor setting.
 875                          */
 876
 877                         break;
 878
 879                 default:
 880                         break;
 881         }
 882
 883         return -ENOIOCTLCMD;
 884 }
 885
 886
 887 static void whiteheat_set_termios(struct usb_serial_port *port, struct ktermios *old_termios)
 888 {
 889         dbg("%s -port %d", __FUNCTION__, port->number);
 890         firm_setup_port(port);
 891 }
 892
 893
 894 static void whiteheat_break_ctl(struct usb_serial_port *port, int break_state) {
 895         firm_set_break(port, break_state);
 896 }
 897
 898
 899 static int whiteheat_chars_in_buffer(struct usb_serial_port *port)
 900 {
 901         struct whiteheat_private *info = usb_get_serial_port_data(port);
 902         struct list_head *tmp;
 903         struct whiteheat_urb_wrap *wrap;
 904         int chars = 0;
 905         unsigned long flags;
 906
 907         dbg("%s - port %d", __FUNCTION__, port->number);
 908
 909         spin_lock_irqsave(&info->lock, flags);
 910         list_for_each(tmp, &info->tx_urbs_submitted) {
 911                 wrap = list_entry(tmp, struct whiteheat_urb_wrap, list);
 912                 chars += wrap->urb->transfer_buffer_length;
 913         }
 914         spin_unlock_irqrestore(&info->lock, flags);
 915
 916         dbg ("%s - returns %d", __FUNCTION__, chars);
 917         return chars;
 918 }
 919
 920
 921 static void whiteheat_throttle (struct usb_serial_port *port)
 922 {
 923         struct whiteheat_private *info = usb_get_serial_port_data(port);
 924         unsigned long flags;
 925
 926         dbg("%s - port %d", __FUNCTION__, port->number);
 927
 928         spin_lock_irqsave(&info->lock, flags);
 929         info->flags |= THROTTLED;
 930         spin_unlock_irqrestore(&info->lock, flags);
 931
 932         return;
 933 }
 934
 935
 936 static void whiteheat_unthrottle (struct usb_serial_port *port)
 937 {
 938         struct whiteheat_private *info = usb_get_serial_port_data(port);
 939         int actually_throttled;
 940         unsigned long flags;
 941
 942         dbg("%s - port %d", __FUNCTION__, port->number);
 943
 944         spin_lock_irqsave(&info->lock, flags);
 945         actually_throttled = info->flags & ACTUALLY_THROTTLED;
 946         info->flags &= ~(THROTTLED | ACTUALLY_THROTTLED);
 947         spin_unlock_irqrestore(&info->lock, flags);
 948
 949         if (actually_throttled)
 950                 rx_data_softint(&info->rx_work);
 951
 952         return;
 953 }
 954
 955
 956 /*****************************************************************************
 957  * Connect Tech's White Heat callback routines
 958  *****************************************************************************/
 959 static void command_port_write_callback(struct urb *urb)
 960 {
 961         int status = urb->status;
 962
 963         dbg("%s", __FUNCTION__);
 964
 965         if (status) {
 966                 dbg("nonzero urb status: %d", status);
 967                 return;
 968         }
 969 }
 970
 971
 972 static void command_port_read_callback(struct urb *urb)
 973 {
 974         struct usb_serial_port *command_port = (struct usb_serial_port *)urb->context;
 975         struct whiteheat_command_private *command_info;
 976         int status = urb->status;
 977         unsigned char *data = urb->transfer_buffer;
 978         int result;
 979
 980         dbg("%s", __FUNCTION__);
 981
 982         command_info = usb_get_serial_port_data(command_port);
 983         if (!command_info) {
 984                 dbg ("%s - command_info is NULL, exiting.", __FUNCTION__);
 985                 return;
 986         }
 987         if (status) {
 988                 dbg("%s - nonzero urb status: %d", __FUNCTION__, status);
 989                 if (status != -ENOENT)
 990                         command_info->command_finished = WHITEHEAT_CMD_FAILURE;
 991                 wake_up(&command_info->wait_command);
 992                 return;
 993         }
 994
 995         usb_serial_debug_data(debug, &command_port->dev, __FUNCTION__, urb->actual_length, data);
 996
 997         if (data[0] == WHITEHEAT_CMD_COMPLETE) {
 998                 command_info->command_finished = WHITEHEAT_CMD_COMPLETE;
 999                 wake_up(&command_info->wait_command);
1000         } else if (data[0] == WHITEHEAT_CMD_FAILURE) {
1001                 command_info->command_finished = WHITEHEAT_CMD_FAILURE;
1002                 wake_up(&command_info->wait_command);
1003         } else if (data[0] == WHITEHEAT_EVENT) {
1004                 /* These are unsolicited reports from the firmware, hence no waiting command to wakeup */
1005                 dbg("%s - event received", __FUNCTION__);
1006         } else if (data[0] == WHITEHEAT_GET_DTR_RTS) {
1007                 memcpy(command_info->result_buffer, &data[1], urb->actual_length - 1);
1008                 command_info->command_finished = WHITEHEAT_CMD_COMPLETE;
1009                 wake_up(&command_info->wait_command);
1010         } else {
1011                 dbg("%s - bad reply from firmware", __FUNCTION__);
1012         }
1013
1014         /* Continue trying to always read */
1015         command_port->read_urb->dev = command_port->serial->dev;
1016         result = usb_submit_urb(command_port->read_urb, GFP_ATOMIC);
1017         if (result)
1018                 dbg("%s - failed resubmitting read urb, error %d", __FUNCTION__, result);
1019 }
1020
1021
1022 static void whiteheat_read_callback(struct urb *urb)
1023 {
1024         struct usb_serial_port *port = (struct usb_serial_port *)urb->context;
1025         struct whiteheat_urb_wrap *wrap;
1026         unsigned char *data = urb->transfer_buffer;
1027         struct whiteheat_private *info = usb_get_serial_port_data(port);
1028         int status = urb->status;
1029
1030         dbg("%s - port %d", __FUNCTION__, port->number);
1031
1032         spin_lock(&info->lock);
1033         wrap = urb_to_wrap(urb, &info->rx_urbs_submitted);
1034         if (!wrap) {
1035                 spin_unlock(&info->lock);
1036                 err("%s - Not my urb!", __FUNCTION__);
1037                 return;
1038         }
1039         list_del(&wrap->list);
1040         spin_unlock(&info->lock);
1041
1042         if (status) {
1043                 dbg("%s - nonzero read bulk status received: %d",
1044                     __FUNCTION__, status);
1045                 spin_lock(&info->lock);
1046                 list_add(&wrap->list, &info->rx_urbs_free);
1047                 spin_unlock(&info->lock);
1048                 return;
1049         }
1050
1051         usb_serial_debug_data(debug, &port->dev, __FUNCTION__, urb->actual_length, data);
1052
1053         spin_lock(&info->lock);
1054         list_add_tail(&wrap->list, &info->rx_urb_q);
1055         if (info->flags & THROTTLED) {
1056                 info->flags |= ACTUALLY_THROTTLED;
1057                 spin_unlock(&info->lock);
1058                 return;
1059         }
1060         spin_unlock(&info->lock);
1061
1062         schedule_work(&info->rx_work);
1063 }
1064
1065
1066 static void whiteheat_write_callback(struct urb *urb)
1067 {
1068         struct usb_serial_port *port = (struct usb_serial_port *)urb->context;
1069         struct whiteheat_private *info = usb_get_serial_port_data(port);
1070         struct whiteheat_urb_wrap *wrap;
1071         int status = urb->status;
1072
1073         dbg("%s - port %d", __FUNCTION__, port->number);
1074
1075         spin_lock(&info->lock);
1076         wrap = urb_to_wrap(urb, &info->tx_urbs_submitted);
1077         if (!wrap) {
1078                 spin_unlock(&info->lock);
1079                 err("%s - Not my urb!", __FUNCTION__);
1080                 return;
1081         }
1082         list_move(&wrap->list, &info->tx_urbs_free);
1083         spin_unlock(&info->lock);
1084
1085         if (status) {
1086                 dbg("%s - nonzero write bulk status received: %d",
1087                     __FUNCTION__, status);
1088                 return;
1089         }
1090
1091         usb_serial_port_softint(port);
1092 }
1093
1094
1095 /*****************************************************************************
1096  * Connect Tech's White Heat firmware interface
1097  *****************************************************************************/
1098 static int firm_send_command(struct usb_serial_port *port, __u8 command, __u8 *data, __u8 datasize)
1099 {
1100         struct usb_serial_port *command_port;
1101         struct whiteheat_command_private *command_info;
1102         struct whiteheat_private *info;
1103         __u8 *transfer_buffer;
1104         int retval = 0;
1105         int t;
1106
1107         dbg("%s - command %d", __FUNCTION__, command);
1108
1109         command_port = port->serial->port[COMMAND_PORT];
1110         command_info = usb_get_serial_port_data(command_port);
1111         mutex_lock(&command_info->mutex);
1112         command_info->command_finished = false;
1113
1114         transfer_buffer = (__u8 *)command_port->write_urb->transfer_buffer;
1115         transfer_buffer[0] = command;
1116         memcpy (&transfer_buffer[1], data, datasize);
1117         command_port->write_urb->transfer_buffer_length = datasize + 1;
1118         command_port->write_urb->dev = port->serial->dev;
1119         retval = usb_submit_urb (command_port->write_urb, GFP_NOIO);
1120         if (retval) {
1121                 dbg("%s - submit urb failed", __FUNCTION__);
1122                 goto exit;
1123         }
1124
1125         /* wait for the command to complete */
1126         t = wait_event_timeout(command_info->wait_command,
1127                 (bool)command_info->command_finished, COMMAND_TIMEOUT);
1128         if (!t)
1129                 usb_kill_urb(command_port->write_urb);
1130
1131         if (command_info->command_finished == false) {
1132                 dbg("%s - command timed out.", __FUNCTION__);
1133                 retval = -ETIMEDOUT;
1134                 goto exit;
1135         }
1136
1137         if (command_info->command_finished == WHITEHEAT_CMD_FAILURE) {
1138                 dbg("%s - command failed.", __FUNCTION__);
1139                 retval = -EIO;
1140                 goto exit;
1141         }
1142
1143         if (command_info->command_finished == WHITEHEAT_CMD_COMPLETE) {
1144                 dbg("%s - command completed.", __FUNCTION__);
1145                 switch (command) {
1146                         case WHITEHEAT_GET_DTR_RTS:
1147                                 info = usb_get_serial_port_data(port);
1148                                 memcpy(&info->mcr, command_info->result_buffer, sizeof(struct whiteheat_dr_info));
1149                                 break;
1150                 }
1151         }
1152
1153 exit:
1154         mutex_unlock(&command_info->mutex);
1155         return retval;
1156 }
1157
1158
1159 static int firm_open(struct usb_serial_port *port) {
1160         struct whiteheat_simple open_command;
1161
1162         open_command.port = port->number - port->serial->minor + 1;
1163         return firm_send_command(port, WHITEHEAT_OPEN, (__u8 *)&open_command, sizeof(open_command));
1164 }
1165
1166
1167 static int firm_close(struct usb_serial_port *port) {
1168         struct whiteheat_simple close_command;
1169
1170         close_command.port = port->number - port->serial->minor + 1;
1171         return firm_send_command(port, WHITEHEAT_CLOSE, (__u8 *)&close_command, sizeof(close_command));
1172 }
1173
1174
1175 static int firm_setup_port(struct usb_serial_port *port) {
1176         struct whiteheat_port_settings port_settings;
1177         unsigned int cflag = port->tty->termios->c_cflag;
1178
1179         port_settings.port = port->number + 1;
1180
1181         /* get the byte size */
1182         switch (cflag & CSIZE) {
1183                 case CS5:       port_settings.bits = 5;   break;
1184                 case CS6:       port_settings.bits = 6;   break;
1185                 case CS7:       port_settings.bits = 7;   break;
1186                 default:
1187                 case CS8:       port_settings.bits = 8;   break;
1188         }
1189         dbg("%s - data bits = %d", __FUNCTION__, port_settings.bits);
1190
1191         /* determine the parity */
1192         if (cflag & PARENB)
1193                 if (cflag & CMSPAR)
1194                         if (cflag & PARODD)
1195                                 port_settings.parity = WHITEHEAT_PAR_MARK;
1196                         else
1197                                 port_settings.parity = WHITEHEAT_PAR_SPACE;
1198                 else
1199                         if (cflag & PARODD)
1200                                 port_settings.parity = WHITEHEAT_PAR_ODD;
1201                         else
1202                                 port_settings.parity = WHITEHEAT_PAR_EVEN;
1203         else
1204                 port_settings.parity = WHITEHEAT_PAR_NONE;
1205         dbg("%s - parity = %c", __FUNCTION__, port_settings.parity);
1206
1207         /* figure out the stop bits requested */
1208         if (cflag & CSTOPB)
1209                 port_settings.stop = 2;
1210         else
1211                 port_settings.stop = 1;
1212         dbg("%s - stop bits = %d", __FUNCTION__, port_settings.stop);
1213
1214         /* figure out the flow control settings */
1215         if (cflag & CRTSCTS)
1216                 port_settings.hflow = (WHITEHEAT_HFLOW_CTS | WHITEHEAT_HFLOW_RTS);
1217         else
1218                 port_settings.hflow = WHITEHEAT_HFLOW_NONE;
1219         dbg("%s - hardware flow control = %s %s %s %s", __FUNCTION__,
1220             (port_settings.hflow & WHITEHEAT_HFLOW_CTS) ? "CTS" : "",
1221             (port_settings.hflow & WHITEHEAT_HFLOW_RTS) ? "RTS" : "",
1222             (port_settings.hflow & WHITEHEAT_HFLOW_DSR) ? "DSR" : "",
1223             (port_settings.hflow & WHITEHEAT_HFLOW_DTR) ? "DTR" : "");
1224
1225         /* determine software flow control */
1226         if (I_IXOFF(port->tty))
1227                 port_settings.sflow = WHITEHEAT_SFLOW_RXTX;
1228         else
1229                 port_settings.sflow = WHITEHEAT_SFLOW_NONE;
1230         dbg("%s - software flow control = %c", __FUNCTION__, port_settings.sflow);
1231
1232         port_settings.xon = START_CHAR(port->tty);
1233         port_settings.xoff = STOP_CHAR(port->tty);
1234         dbg("%s - XON = %2x, XOFF = %2x", __FUNCTION__, port_settings.xon, port_settings.xoff);
1235
1236         /* get the baud rate wanted */
1237         port_settings.baud = tty_get_baud_rate(port->tty);
1238         dbg("%s - baud rate = %d", __FUNCTION__, port_settings.baud);
1239
1240         /* fixme: should set validated settings */
1241         tty_encode_baud_rate(port->tty, port_settings.baud, port_settings.baud);
1242         /* handle any settings that aren't specified in the tty structure */
1243         port_settings.lloop = 0;
1244
1245         /* now send the message to the device */
1246         return firm_send_command(port, WHITEHEAT_SETUP_PORT, (__u8 *)&port_settings, sizeof(port_settings));
1247 }
1248
1249
1250 static int firm_set_rts(struct usb_serial_port *port, __u8 onoff) {
1251         struct whiteheat_set_rdb rts_command;
1252
1253         rts_command.port = port->number - port->serial->minor + 1;
1254         rts_command.state = onoff;
1255         return firm_send_command(port, WHITEHEAT_SET_RTS, (__u8 *)&rts_command, sizeof(rts_command));
1256 }
1257
1258
1259 static int firm_set_dtr(struct usb_serial_port *port, __u8 onoff) {
1260         struct whiteheat_set_rdb dtr_command;
1261
1262         dtr_command.port = port->number - port->serial->minor + 1;
1263         dtr_command.state = onoff;
1264         return firm_send_command(port, WHITEHEAT_SET_RTS, (__u8 *)&dtr_command, sizeof(dtr_command));
1265 }
1266
1267
1268 static int firm_set_break(struct usb_serial_port *port, __u8 onoff) {
1269         struct whiteheat_set_rdb break_command;
1270
1271         break_command.port = port->number - port->serial->minor + 1;
1272         break_command.state = onoff;
1273         return firm_send_command(port, WHITEHEAT_SET_RTS, (__u8 *)&break_command, sizeof(break_command));
1274 }
1275
1276
1277 static int firm_purge(struct usb_serial_port *port, __u8 rxtx) {
1278         struct whiteheat_purge purge_command;
1279
1280         purge_command.port = port->number - port->serial->minor + 1;
1281         purge_command.what = rxtx;
1282         return firm_send_command(port, WHITEHEAT_PURGE, (__u8 *)&purge_command, sizeof(purge_command));
1283 }
1284
1285
1286 static int firm_get_dtr_rts(struct usb_serial_port *port) {
1287         struct whiteheat_simple get_dr_command;
1288
1289         get_dr_command.port = port->number - port->serial->minor + 1;
1290         return firm_send_command(port, WHITEHEAT_GET_DTR_RTS, (__u8 *)&get_dr_command, sizeof(get_dr_command));
1291 }
1292
1293
1294 static int firm_report_tx_done(struct usb_serial_port *port) {
1295         struct whiteheat_simple close_command;
1296
1297         close_command.port = port->number - port->serial->minor + 1;
1298         return firm_send_command(port, WHITEHEAT_REPORT_TX_DONE, (__u8 *)&close_command, sizeof(close_command));
1299 }
1300
1301
1302 /*****************************************************************************
1303  * Connect Tech's White Heat utility functions
1304  *****************************************************************************/
1305 static int start_command_port(struct usb_serial *serial)
1306 {
1307         struct usb_serial_port *command_port;
1308         struct whiteheat_command_private *command_info;
1309         int retval = 0;
1310
1311         command_port = serial->port[COMMAND_PORT];
1312         command_info = usb_get_serial_port_data(command_port);
1313         mutex_lock(&command_info->mutex);
1314         if (!command_info->port_running) {
1315                 /* Work around HCD bugs */
1316                 usb_clear_halt(serial->dev, command_port->read_urb->pipe);
1317
1318                 command_port->read_urb->dev = serial->dev;
1319                 retval = usb_submit_urb(command_port->read_urb, GFP_KERNEL);
1320                 if (retval) {
1321                         err("%s - failed submitting read urb, error %d", __FUNCTION__, retval);
1322                         goto exit;
1323                 }
1324         }
1325         command_info->port_running++;
1326
1327 exit:
1328         mutex_unlock(&command_info->mutex);
1329         return retval;
1330 }
1331
1332
1333 static void stop_command_port(struct usb_serial *serial)
1334 {
1335         struct usb_serial_port *command_port;
1336         struct whiteheat_command_private *command_info;
1337
1338         command_port = serial->port[COMMAND_PORT];
1339         command_info = usb_get_serial_port_data(command_port);
1340         mutex_lock(&command_info->mutex);
1341         command_info->port_running--;
1342         if (!command_info->port_running)
1343                 usb_kill_urb(command_port->read_urb);
1344         mutex_unlock(&command_info->mutex);
1345 }
1346
1347
1348 static int start_port_read(struct usb_serial_port *port)
1349 {
1350         struct whiteheat_private *info = usb_get_serial_port_data(port);
1351         struct whiteheat_urb_wrap *wrap;
1352         struct urb *urb;
1353         int retval = 0;
1354         unsigned long flags;
1355         struct list_head *tmp;
1356         struct list_head *tmp2;
1357
1358         spin_lock_irqsave(&info->lock, flags);
1359
1360         list_for_each_safe(tmp, tmp2, &info->rx_urbs_free) {
1361                 list_del(tmp);
1362                 wrap = list_entry(tmp, struct whiteheat_urb_wrap, list);
1363                 urb = wrap->urb;
1364                 urb->dev = port->serial->dev;
1365                 spin_unlock_irqrestore(&info->lock, flags);
1366                 retval = usb_submit_urb(urb, GFP_KERNEL);
1367                 if (retval) {
1368                         spin_lock_irqsave(&info->lock, flags);
1369                         list_add(tmp, &info->rx_urbs_free);
1370                         list_for_each_safe(tmp, tmp2, &info->rx_urbs_submitted) {
1371                                 wrap = list_entry(tmp, struct whiteheat_urb_wrap, list);
1372                                 urb = wrap->urb;
1373                                 list_del(tmp);
1374                                 spin_unlock_irqrestore(&info->lock, flags);
1375                                 usb_kill_urb(urb);
1376                                 spin_lock_irqsave(&info->lock, flags);
1377                                 list_add(tmp, &info->rx_urbs_free);
1378                         }
1379                         break;
1380                 }
1381                 spin_lock_irqsave(&info->lock, flags);
1382                 list_add(tmp, &info->rx_urbs_submitted);
1383         }
1384
1385         spin_unlock_irqrestore(&info->lock, flags);
1386
1387         return retval;
1388 }
1389
1390
1391 static struct whiteheat_urb_wrap *urb_to_wrap(struct urb* urb, struct list_head *head)
1392 {
1393         struct whiteheat_urb_wrap *wrap;
1394         struct list_head *tmp;
1395
1396         list_for_each(tmp, head) {
1397                 wrap = list_entry(tmp, struct whiteheat_urb_wrap, list);
1398                 if (wrap->urb == urb)
1399                         return wrap;
1400         }
1401
1402         return NULL;
1403 }
1404
1405
1406 static struct list_head *list_first(struct list_head *head)
1407 {
1408         return head->next;
1409 }
1410
1411
1412 static void rx_data_softint(struct work_struct *work)
1413 {
1414         struct whiteheat_private *info =
1415                 container_of(work, struct whiteheat_private, rx_work);
1416         struct usb_serial_port *port = info->port;
1417         struct tty_struct *tty = port->tty;
1418         struct whiteheat_urb_wrap *wrap;
1419         struct urb *urb;
1420         unsigned long flags;
1421         struct list_head *tmp;
1422         struct list_head *tmp2;
1423         int result;
1424         int sent = 0;
1425
1426         spin_lock_irqsave(&info->lock, flags);
1427         if (info->flags & THROTTLED) {
1428                 spin_unlock_irqrestore(&info->lock, flags);
1429                 return;
1430         }
1431
1432         list_for_each_safe(tmp, tmp2, &info->rx_urb_q) {
1433                 list_del(tmp);
1434                 spin_unlock_irqrestore(&info->lock, flags);
1435
1436                 wrap = list_entry(tmp, struct whiteheat_urb_wrap, list);
1437                 urb = wrap->urb;
1438
1439                 if (tty && urb->actual_length) {
1440                         int len = tty_buffer_request_room(tty, urb->actual_length);
1441                         /* This stuff can go away now I suspect */
1442                         if (unlikely(len < urb->actual_length)) {
1443                                 spin_lock_irqsave(&info->lock, flags);
1444                                 list_add(tmp, &info->rx_urb_q);
1445                                 spin_unlock_irqrestore(&info->lock, flags);
1446                                 tty_flip_buffer_push(tty);
1447                                 schedule_work(&info->rx_work);
1448                                 return;
1449                         }
1450                         tty_insert_flip_string(tty, urb->transfer_buffer, len);
1451                         sent += len;
1452                 }
1453
1454                 urb->dev = port->serial->dev;
1455                 result = usb_submit_urb(urb, GFP_ATOMIC);
1456                 if (result) {
1457                         err("%s - failed resubmitting read urb, error %d", __FUNCTION__, result);
1458                         spin_lock_irqsave(&info->lock, flags);
1459                         list_add(tmp, &info->rx_urbs_free);
1460                         continue;
1461                 }
1462
1463                 spin_lock_irqsave(&info->lock, flags);
1464                 list_add(tmp, &info->rx_urbs_submitted);
1465         }
1466         spin_unlock_irqrestore(&info->lock, flags);
1467
1468         if (sent)
1469                 tty_flip_buffer_push(tty);
1470 }
1471
1472
1473 /*****************************************************************************
1474  * Connect Tech's White Heat module functions
1475  *****************************************************************************/
1476 static int __init whiteheat_init (void)
1477 {
1478         int retval;
1479         retval = usb_serial_register(&whiteheat_fake_device);
1480         if (retval)
1481                 goto failed_fake_register;
1482         retval = usb_serial_register(&whiteheat_device);
1483         if (retval)
1484                 goto failed_device_register;
1485         retval = usb_register(&whiteheat_driver);
1486         if (retval)
1487                 goto failed_usb_register;
1488         info(DRIVER_DESC " " DRIVER_VERSION);
1489         return 0;
1490 failed_usb_register:
1491         usb_serial_deregister(&whiteheat_device);
1492 failed_device_register:
1493         usb_serial_deregister(&whiteheat_fake_device);
1494 failed_fake_register:
1495         return retval;
1496 }
1497
1498
1499 static void __exit whiteheat_exit (void)
1500 {
1501         usb_deregister (&whiteheat_driver);
1502         usb_serial_deregister (&whiteheat_fake_device);
1503         usb_serial_deregister (&whiteheat_device);
1504 }
1505
1506
1507 module_init(whiteheat_init);
1508 module_exit(whiteheat_exit);
1509
1510 MODULE_AUTHOR( DRIVER_AUTHOR );
1511 MODULE_DESCRIPTION( DRIVER_DESC );
1512 MODULE_LICENSE("GPL");
1513
1514 module_param(urb_pool_size, int, 0);
1515 MODULE_PARM_DESC(urb_pool_size, "Number of urbs to use for buffering");
1516
1517 module_param(debug, bool, S_IRUGO | S_IWUSR);
1518 MODULE_PARM_DESC(debug, "Debug enabled or not");