Merge master.kernel.org:/home/rmk/linux-2.6-drvmodel
[linux-2.6] / drivers / usb / host / pci-quirks.c
1 /*
2  * This file contains code to reset and initialize USB host controllers.
3  * Some of it includes work-arounds for PCI hardware and BIOS quirks.
4  * It may need to run early during booting -- before USB would normally
5  * initialize -- to ensure that Linux doesn't use any legacy modes.
6  *
7  *  Copyright (c) 1999 Martin Mares <mj@ucw.cz>
8  *  (and others)
9  */
10
11 #include <linux/config.h>
12 #ifdef CONFIG_USB_DEBUG
13 #define DEBUG
14 #else
15 #undef DEBUG
16 #endif
17
18 #include <linux/types.h>
19 #include <linux/kernel.h>
20 #include <linux/pci.h>
21 #include <linux/init.h>
22 #include <linux/delay.h>
23 #include <linux/acpi.h>
24
25
26 #define UHCI_USBLEGSUP          0xc0            /* legacy support */
27 #define UHCI_USBCMD             0               /* command register */
28 #define UHCI_USBINTR            4               /* interrupt register */
29 #define UHCI_USBLEGSUP_RWC      0x8f00          /* the R/WC bits */
30 #define UHCI_USBLEGSUP_RO       0x5040          /* R/O and reserved bits */
31 #define UHCI_USBCMD_RUN         0x0001          /* RUN/STOP bit */
32 #define UHCI_USBCMD_HCRESET     0x0002          /* Host Controller reset */
33 #define UHCI_USBCMD_EGSM        0x0008          /* Global Suspend Mode */
34 #define UHCI_USBCMD_CONFIGURE   0x0040          /* Config Flag */
35 #define UHCI_USBINTR_RESUME     0x0002          /* Resume interrupt enable */
36
37 #define OHCI_CONTROL            0x04
38 #define OHCI_CMDSTATUS          0x08
39 #define OHCI_INTRSTATUS         0x0c
40 #define OHCI_INTRENABLE         0x10
41 #define OHCI_INTRDISABLE        0x14
42 #define OHCI_OCR                (1 << 3)        /* ownership change request */
43 #define OHCI_CTRL_RWC           (1 << 9)        /* remote wakeup connected */
44 #define OHCI_CTRL_IR            (1 << 8)        /* interrupt routing */
45 #define OHCI_INTR_OC            (1 << 30)       /* ownership change */
46
47 #define EHCI_HCC_PARAMS         0x08            /* extended capabilities */
48 #define EHCI_USBCMD             0               /* command register */
49 #define EHCI_USBCMD_RUN         (1 << 0)        /* RUN/STOP bit */
50 #define EHCI_USBSTS             4               /* status register */
51 #define EHCI_USBSTS_HALTED      (1 << 12)       /* HCHalted bit */
52 #define EHCI_USBINTR            8               /* interrupt register */
53 #define EHCI_USBLEGSUP          0               /* legacy support register */
54 #define EHCI_USBLEGSUP_BIOS     (1 << 16)       /* BIOS semaphore */
55 #define EHCI_USBLEGSUP_OS       (1 << 24)       /* OS semaphore */
56 #define EHCI_USBLEGCTLSTS       4               /* legacy control/status */
57 #define EHCI_USBLEGCTLSTS_SOOE  (1 << 13)       /* SMI on ownership change */
58
59
60 /*
61  * Make sure the controller is completely inactive, unable to
62  * generate interrupts or do DMA.
63  */
64 void uhci_reset_hc(struct pci_dev *pdev, unsigned long base)
65 {
66         /* Turn off PIRQ enable and SMI enable.  (This also turns off the
67          * BIOS's USB Legacy Support.)  Turn off all the R/WC bits too.
68          */
69         pci_write_config_word(pdev, UHCI_USBLEGSUP, UHCI_USBLEGSUP_RWC);
70
71         /* Reset the HC - this will force us to get a
72          * new notification of any already connected
73          * ports due to the virtual disconnect that it
74          * implies.
75          */
76         outw(UHCI_USBCMD_HCRESET, base + UHCI_USBCMD);
77         mb();
78         udelay(5);
79         if (inw(base + UHCI_USBCMD) & UHCI_USBCMD_HCRESET)
80                 dev_warn(&pdev->dev, "HCRESET not completed yet!\n");
81
82         /* Just to be safe, disable interrupt requests and
83          * make sure the controller is stopped.
84          */
85         outw(0, base + UHCI_USBINTR);
86         outw(0, base + UHCI_USBCMD);
87 }
88 EXPORT_SYMBOL_GPL(uhci_reset_hc);
89
90 /*
91  * Initialize a controller that was newly discovered or has just been
92  * resumed.  In either case we can't be sure of its previous state.
93  *
94  * Returns: 1 if the controller was reset, 0 otherwise.
95  */
96 int uhci_check_and_reset_hc(struct pci_dev *pdev, unsigned long base)
97 {
98         u16 legsup;
99         unsigned int cmd, intr;
100
101         /*
102          * When restarting a suspended controller, we expect all the
103          * settings to be the same as we left them:
104          *
105          *      PIRQ and SMI disabled, no R/W bits set in USBLEGSUP;
106          *      Controller is stopped and configured with EGSM set;
107          *      No interrupts enabled except possibly Resume Detect.
108          *
109          * If any of these conditions are violated we do a complete reset.
110          */
111         pci_read_config_word(pdev, UHCI_USBLEGSUP, &legsup);
112         if (legsup & ~(UHCI_USBLEGSUP_RO | UHCI_USBLEGSUP_RWC)) {
113                 dev_dbg(&pdev->dev, "%s: legsup = 0x%04x\n",
114                                 __FUNCTION__, legsup);
115                 goto reset_needed;
116         }
117
118         cmd = inw(base + UHCI_USBCMD);
119         if ((cmd & UHCI_USBCMD_RUN) || !(cmd & UHCI_USBCMD_CONFIGURE) ||
120                         !(cmd & UHCI_USBCMD_EGSM)) {
121                 dev_dbg(&pdev->dev, "%s: cmd = 0x%04x\n",
122                                 __FUNCTION__, cmd);
123                 goto reset_needed;
124         }
125
126         intr = inw(base + UHCI_USBINTR);
127         if (intr & (~UHCI_USBINTR_RESUME)) {
128                 dev_dbg(&pdev->dev, "%s: intr = 0x%04x\n",
129                                 __FUNCTION__, intr);
130                 goto reset_needed;
131         }
132         return 0;
133
134 reset_needed:
135         dev_dbg(&pdev->dev, "Performing full reset\n");
136         uhci_reset_hc(pdev, base);
137         return 1;
138 }
139 EXPORT_SYMBOL_GPL(uhci_check_and_reset_hc);
140
141 static void __devinit quirk_usb_handoff_uhci(struct pci_dev *pdev)
142 {
143         unsigned long base = 0;
144         int i;
145
146         for (i = 0; i < PCI_ROM_RESOURCE; i++)
147                 if ((pci_resource_flags(pdev, i) & IORESOURCE_IO)) {
148                         base = pci_resource_start(pdev, i);
149                         break;
150                 }
151
152         if (base)
153                 uhci_check_and_reset_hc(pdev, base);
154 }
155
156 static void __devinit quirk_usb_handoff_ohci(struct pci_dev *pdev)
157 {
158         void __iomem *base;
159         int wait_time;
160         u32 control;
161
162         base = ioremap_nocache(pci_resource_start(pdev, 0),
163                                      pci_resource_len(pdev, 0));
164         if (base == NULL) return;
165
166 /* On PA-RISC, PDC can leave IR set incorrectly; ignore it there. */
167 #ifndef __hppa__
168         control = readl(base + OHCI_CONTROL);
169         if (control & OHCI_CTRL_IR) {
170                 wait_time = 500; /* arbitrary; 5 seconds */
171                 writel(OHCI_INTR_OC, base + OHCI_INTRENABLE);
172                 writel(OHCI_OCR, base + OHCI_CMDSTATUS);
173                 while (wait_time > 0 &&
174                                 readl(base + OHCI_CONTROL) & OHCI_CTRL_IR) {
175                         wait_time -= 10;
176                         msleep(10);
177                 }
178                 if (wait_time <= 0)
179                         printk(KERN_WARNING "%s %s: early BIOS handoff "
180                                         "failed (BIOS bug ?)\n",
181                                         pdev->dev.bus_id, "OHCI");
182
183                 /* reset controller, preserving RWC */
184                 writel(control & OHCI_CTRL_RWC, base + OHCI_CONTROL);
185         }
186 #endif
187
188         /*
189          * disable interrupts
190          */
191         writel(~(u32)0, base + OHCI_INTRDISABLE);
192         writel(~(u32)0, base + OHCI_INTRSTATUS);
193
194         iounmap(base);
195 }
196
197 static void __devinit quirk_usb_disable_ehci(struct pci_dev *pdev)
198 {
199         int wait_time, delta;
200         void __iomem *base, *op_reg_base;
201         u32 hcc_params, val, temp;
202         u8 cap_length;
203
204         base = ioremap_nocache(pci_resource_start(pdev, 0),
205                                 pci_resource_len(pdev, 0));
206         if (base == NULL) return;
207
208         cap_length = readb(base);
209         op_reg_base = base + cap_length;
210         hcc_params = readl(base + EHCI_HCC_PARAMS);
211         hcc_params = (hcc_params >> 8) & 0xff;
212         if (hcc_params) {
213                 pci_read_config_dword(pdev,
214                                         hcc_params + EHCI_USBLEGSUP,
215                                         &val);
216                 if (((val & 0xff) == 1) && (val & EHCI_USBLEGSUP_BIOS)) {
217                         /*
218                          * Ok, BIOS is in smm mode, try to hand off...
219                          */
220                         pci_read_config_dword(pdev,
221                                                 hcc_params + EHCI_USBLEGCTLSTS,
222                                                 &temp);
223                         pci_write_config_dword(pdev,
224                                                 hcc_params + EHCI_USBLEGCTLSTS,
225                                                 temp | EHCI_USBLEGCTLSTS_SOOE);
226                         val |= EHCI_USBLEGSUP_OS;
227                         pci_write_config_dword(pdev,
228                                                 hcc_params + EHCI_USBLEGSUP,
229                                                 val);
230
231                         wait_time = 500;
232                         do {
233                                 msleep(10);
234                                 wait_time -= 10;
235                                 pci_read_config_dword(pdev,
236                                                 hcc_params + EHCI_USBLEGSUP,
237                                                 &val);
238                         } while (wait_time && (val & EHCI_USBLEGSUP_BIOS));
239                         if (!wait_time) {
240                                 /*
241                                  * well, possibly buggy BIOS...
242                                  */
243                                 printk(KERN_WARNING "%s %s: early BIOS handoff "
244                                                 "failed (BIOS bug ?)\n",
245                                         pdev->dev.bus_id, "EHCI");
246                                 pci_write_config_dword(pdev,
247                                                 hcc_params + EHCI_USBLEGSUP,
248                                                 EHCI_USBLEGSUP_OS);
249                                 pci_write_config_dword(pdev,
250                                                 hcc_params + EHCI_USBLEGCTLSTS,
251                                                 0);
252                         }
253                 }
254         }
255
256         /*
257          * halt EHCI & disable its interrupts in any case
258          */
259         val = readl(op_reg_base + EHCI_USBSTS);
260         if ((val & EHCI_USBSTS_HALTED) == 0) {
261                 val = readl(op_reg_base + EHCI_USBCMD);
262                 val &= ~EHCI_USBCMD_RUN;
263                 writel(val, op_reg_base + EHCI_USBCMD);
264
265                 wait_time = 2000;
266                 delta = 100;
267                 do {
268                         writel(0x3f, op_reg_base + EHCI_USBSTS);
269                         udelay(delta);
270                         wait_time -= delta;
271                         val = readl(op_reg_base + EHCI_USBSTS);
272                         if ((val == ~(u32)0) || (val & EHCI_USBSTS_HALTED)) {
273                                 break;
274                         }
275                 } while (wait_time > 0);
276         }
277         writel(0, op_reg_base + EHCI_USBINTR);
278         writel(0x3f, op_reg_base + EHCI_USBSTS);
279
280         iounmap(base);
281
282         return;
283 }
284
285
286
287 static void __devinit quirk_usb_early_handoff(struct pci_dev *pdev)
288 {
289         if (pdev->class == PCI_CLASS_SERIAL_USB_UHCI)
290                 quirk_usb_handoff_uhci(pdev);
291         else if (pdev->class == PCI_CLASS_SERIAL_USB_OHCI)
292                 quirk_usb_handoff_ohci(pdev);
293         else if (pdev->class == PCI_CLASS_SERIAL_USB_EHCI)
294                 quirk_usb_disable_ehci(pdev);
295 }
296 DECLARE_PCI_FIXUP_HEADER(PCI_ANY_ID, PCI_ANY_ID, quirk_usb_early_handoff);