git.oblomov.eu Git - linux-2.6/blob - drivers/i2c/busses/i2c-s3c2410.c

   1 /* linux/drivers/i2c/busses/i2c-s3c2410.c
   2  *
   3  * Copyright (C) 2004,2005,2009 Simtec Electronics
   4  *      Ben Dooks <ben@simtec.co.uk>
   5  *
   6  * S3C2410 I2C Controller
   7  *
   8  * This program is free software; you can redistribute it and/or modify
   9  * it under the terms of the GNU General Public License as published by
  10  * the Free Software Foundation; either version 2 of the License, or
  11  * (at your option) any later version.
  12  *
  13  * This program is distributed in the hope that it will be useful,
  14  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  15  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  16  * GNU General Public License for more details.
  17  *
  18  * You should have received a copy of the GNU General Public License
  19  * along with this program; if not, write to the Free Software
  20  * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
  21 */
  22
  23 #include <linux/kernel.h>
  24 #include <linux/module.h>
  25
  26 #include <linux/i2c.h>
  27 #include <linux/i2c-id.h>
  28 #include <linux/init.h>
  29 #include <linux/time.h>
  30 #include <linux/interrupt.h>
  31 #include <linux/delay.h>
  32 #include <linux/errno.h>
  33 #include <linux/err.h>
  34 #include <linux/platform_device.h>
  35 #include <linux/clk.h>
  36 #include <linux/cpufreq.h>
  37
  38 #include <asm/irq.h>
  39 #include <asm/io.h>
  40
  41 #include <plat/regs-iic.h>
  42 #include <plat/iic.h>
  43
  44 /* i2c controller state */
  45
  46 enum s3c24xx_i2c_state {
  47         STATE_IDLE,
  48         STATE_START,
  49         STATE_READ,
  50         STATE_WRITE,
  51         STATE_STOP
  52 };
  53
  54 enum s3c24xx_i2c_type {
  55         TYPE_S3C2410,
  56         TYPE_S3C2440,
  57 };
  58
  59 struct s3c24xx_i2c {
  60         spinlock_t              lock;
  61         wait_queue_head_t       wait;
  62         unsigned int            suspended:1;
  63
  64         struct i2c_msg          *msg;
  65         unsigned int            msg_num;
  66         unsigned int            msg_idx;
  67         unsigned int            msg_ptr;
  68
  69         unsigned int            tx_setup;
  70         unsigned int            irq;
  71
  72         enum s3c24xx_i2c_state  state;
  73         unsigned long           clkrate;
  74
  75         void __iomem            *regs;
  76         struct clk              *clk;
  77         struct device           *dev;
  78         struct resource         *ioarea;
  79         struct i2c_adapter      adap;
  80
  81 #ifdef CONFIG_CPU_FREQ
  82         struct notifier_block   freq_transition;
  83 #endif
  84 };
  85
  86 /* default platform data removed, dev should always carry data. */
  87
  88 /* s3c24xx_i2c_is2440()
  89  *
  90  * return true is this is an s3c2440
  91 */
  92
  93 static inline int s3c24xx_i2c_is2440(struct s3c24xx_i2c *i2c)
  94 {
  95         struct platform_device *pdev = to_platform_device(i2c->dev);
  96         enum s3c24xx_i2c_type type;
  97
  98         type = platform_get_device_id(pdev)->driver_data;
  99         return type == TYPE_S3C2440;
 100 }
 101
 102 /* s3c24xx_i2c_master_complete
 103  *
 104  * complete the message and wake up the caller, using the given return code,
 105  * or zero to mean ok.
 106 */
 107
 108 static inline void s3c24xx_i2c_master_complete(struct s3c24xx_i2c *i2c, int ret)
 109 {
 110         dev_dbg(i2c->dev, "master_complete %d\n", ret);
 111
 112         i2c->msg_ptr = 0;
 113         i2c->msg = NULL;
 114         i2c->msg_idx++;
 115         i2c->msg_num = 0;
 116         if (ret)
 117                 i2c->msg_idx = ret;
 118
 119         wake_up(&i2c->wait);
 120 }
 121
 122 static inline void s3c24xx_i2c_disable_ack(struct s3c24xx_i2c *i2c)
 123 {
 124         unsigned long tmp;
 125
 126         tmp = readl(i2c->regs + S3C2410_IICCON);
 127         writel(tmp & ~S3C2410_IICCON_ACKEN, i2c->regs + S3C2410_IICCON);
 128 }
 129
 130 static inline void s3c24xx_i2c_enable_ack(struct s3c24xx_i2c *i2c)
 131 {
 132         unsigned long tmp;
 133
 134         tmp = readl(i2c->regs + S3C2410_IICCON);
 135         writel(tmp | S3C2410_IICCON_ACKEN, i2c->regs + S3C2410_IICCON);
 136 }
 137
 138 /* irq enable/disable functions */
 139
 140 static inline void s3c24xx_i2c_disable_irq(struct s3c24xx_i2c *i2c)
 141 {
 142         unsigned long tmp;
 143
 144         tmp = readl(i2c->regs + S3C2410_IICCON);
 145         writel(tmp & ~S3C2410_IICCON_IRQEN, i2c->regs + S3C2410_IICCON);
 146 }
 147
 148 static inline void s3c24xx_i2c_enable_irq(struct s3c24xx_i2c *i2c)
 149 {
 150         unsigned long tmp;
 151
 152         tmp = readl(i2c->regs + S3C2410_IICCON);
 153         writel(tmp | S3C2410_IICCON_IRQEN, i2c->regs + S3C2410_IICCON);
 154 }
 155
 156
 157 /* s3c24xx_i2c_message_start
 158  *
 159  * put the start of a message onto the bus
 160 */
 161
 162 static void s3c24xx_i2c_message_start(struct s3c24xx_i2c *i2c,
 163                                       struct i2c_msg *msg)
 164 {
 165         unsigned int addr = (msg->addr & 0x7f) << 1;
 166         unsigned long stat;
 167         unsigned long iiccon;
 168
 169         stat = 0;
 170         stat |=  S3C2410_IICSTAT_TXRXEN;
 171
 172         if (msg->flags & I2C_M_RD) {
 173                 stat |= S3C2410_IICSTAT_MASTER_RX;
 174                 addr |= 1;
 175         } else
 176                 stat |= S3C2410_IICSTAT_MASTER_TX;
 177
 178         if (msg->flags & I2C_M_REV_DIR_ADDR)
 179                 addr ^= 1;
 180
 181         /* todo - check for wether ack wanted or not */
 182         s3c24xx_i2c_enable_ack(i2c);
 183
 184         iiccon = readl(i2c->regs + S3C2410_IICCON);
 185         writel(stat, i2c->regs + S3C2410_IICSTAT);
 186
 187         dev_dbg(i2c->dev, "START: %08lx to IICSTAT, %02x to DS\n", stat, addr);
 188         writeb(addr, i2c->regs + S3C2410_IICDS);
 189
 190         /* delay here to ensure the data byte has gotten onto the bus
 191          * before the transaction is started */
 192
 193         ndelay(i2c->tx_setup);
 194
 195         dev_dbg(i2c->dev, "iiccon, %08lx\n", iiccon);
 196         writel(iiccon, i2c->regs + S3C2410_IICCON);
 197
 198         stat |= S3C2410_IICSTAT_START;
 199         writel(stat, i2c->regs + S3C2410_IICSTAT);
 200 }
 201
 202 static inline void s3c24xx_i2c_stop(struct s3c24xx_i2c *i2c, int ret)
 203 {
 204         unsigned long iicstat = readl(i2c->regs + S3C2410_IICSTAT);
 205
 206         dev_dbg(i2c->dev, "STOP\n");
 207
 208         /* stop the transfer */
 209         iicstat &= ~S3C2410_IICSTAT_START;
 210         writel(iicstat, i2c->regs + S3C2410_IICSTAT);
 211
 212         i2c->state = STATE_STOP;
 213
 214         s3c24xx_i2c_master_complete(i2c, ret);
 215         s3c24xx_i2c_disable_irq(i2c);
 216 }
 217
 218 /* helper functions to determine the current state in the set of
 219  * messages we are sending */
 220
 221 /* is_lastmsg()
 222  *
 223  * returns TRUE if the current message is the last in the set
 224 */
 225
 226 static inline int is_lastmsg(struct s3c24xx_i2c *i2c)
 227 {
 228         return i2c->msg_idx >= (i2c->msg_num - 1);
 229 }
 230
 231 /* is_msglast
 232  *
 233  * returns TRUE if we this is the last byte in the current message
 234 */
 235
 236 static inline int is_msglast(struct s3c24xx_i2c *i2c)
 237 {
 238         return i2c->msg_ptr == i2c->msg->len-1;
 239 }
 240
 241 /* is_msgend
 242  *
 243  * returns TRUE if we reached the end of the current message
 244 */
 245
 246 static inline int is_msgend(struct s3c24xx_i2c *i2c)
 247 {
 248         return i2c->msg_ptr >= i2c->msg->len;
 249 }
 250
 251 /* i2s_s3c_irq_nextbyte
 252  *
 253  * process an interrupt and work out what to do
 254  */
 255
 256 static int i2s_s3c_irq_nextbyte(struct s3c24xx_i2c *i2c, unsigned long iicstat)
 257 {
 258         unsigned long tmp;
 259         unsigned char byte;
 260         int ret = 0;
 261
 262         switch (i2c->state) {
 263
 264         case STATE_IDLE:
 265                 dev_err(i2c->dev, "%s: called in STATE_IDLE\n", __func__);
 266                 goto out;
 267                 break;
 268
 269         case STATE_STOP:
 270                 dev_err(i2c->dev, "%s: called in STATE_STOP\n", __func__);
 271                 s3c24xx_i2c_disable_irq(i2c);
 272                 goto out_ack;
 273
 274         case STATE_START:
 275                 /* last thing we did was send a start condition on the
 276                  * bus, or started a new i2c message
 277                  */
 278
 279                 if (iicstat & S3C2410_IICSTAT_LASTBIT &&
 280                     !(i2c->msg->flags & I2C_M_IGNORE_NAK)) {
 281                         /* ack was not received... */
 282
 283                         dev_dbg(i2c->dev, "ack was not received\n");
 284                         s3c24xx_i2c_stop(i2c, -ENXIO);
 285                         goto out_ack;
 286                 }
 287
 288                 if (i2c->msg->flags & I2C_M_RD)
 289                         i2c->state = STATE_READ;
 290                 else
 291                         i2c->state = STATE_WRITE;
 292
 293                 /* terminate the transfer if there is nothing to do
 294                  * as this is used by the i2c probe to find devices. */
 295
 296                 if (is_lastmsg(i2c) && i2c->msg->len == 0) {
 297                         s3c24xx_i2c_stop(i2c, 0);
 298                         goto out_ack;
 299                 }
 300
 301                 if (i2c->state == STATE_READ)
 302                         goto prepare_read;
 303
 304                 /* fall through to the write state, as we will need to
 305                  * send a byte as well */
 306
 307         case STATE_WRITE:
 308                 /* we are writing data to the device... check for the
 309                  * end of the message, and if so, work out what to do
 310                  */
 311
 312                 if (!(i2c->msg->flags & I2C_M_IGNORE_NAK)) {
 313                         if (iicstat & S3C2410_IICSTAT_LASTBIT) {
 314                                 dev_dbg(i2c->dev, "WRITE: No Ack\n");
 315
 316                                 s3c24xx_i2c_stop(i2c, -ECONNREFUSED);
 317                                 goto out_ack;
 318                         }
 319                 }
 320
 321  retry_write:
 322
 323                 if (!is_msgend(i2c)) {
 324                         byte = i2c->msg->buf[i2c->msg_ptr++];
 325                         writeb(byte, i2c->regs + S3C2410_IICDS);
 326
 327                         /* delay after writing the byte to allow the
 328                          * data setup time on the bus, as writing the
 329                          * data to the register causes the first bit
 330                          * to appear on SDA, and SCL will change as
 331                          * soon as the interrupt is acknowledged */
 332
 333                         ndelay(i2c->tx_setup);
 334
 335                 } else if (!is_lastmsg(i2c)) {
 336                         /* we need to go to the next i2c message */
 337
 338                         dev_dbg(i2c->dev, "WRITE: Next Message\n");
 339
 340                         i2c->msg_ptr = 0;
 341                         i2c->msg_idx++;
 342                         i2c->msg++;
 343
 344                         /* check to see if we need to do another message */
 345                         if (i2c->msg->flags & I2C_M_NOSTART) {
 346
 347                                 if (i2c->msg->flags & I2C_M_RD) {
 348                                         /* cannot do this, the controller
 349                                          * forces us to send a new START
 350                                          * when we change direction */
 351
 352                                         s3c24xx_i2c_stop(i2c, -EINVAL);
 353                                 }
 354
 355                                 goto retry_write;
 356                         } else {
 357                                 /* send the new start */
 358                                 s3c24xx_i2c_message_start(i2c, i2c->msg);
 359                                 i2c->state = STATE_START;
 360                         }
 361
 362                 } else {
 363                         /* send stop */
 364
 365                         s3c24xx_i2c_stop(i2c, 0);
 366                 }
 367                 break;
 368
 369         case STATE_READ:
 370                 /* we have a byte of data in the data register, do
 371                  * something with it, and then work out wether we are
 372                  * going to do any more read/write
 373                  */
 374
 375                 byte = readb(i2c->regs + S3C2410_IICDS);
 376                 i2c->msg->buf[i2c->msg_ptr++] = byte;
 377
 378  prepare_read:
 379                 if (is_msglast(i2c)) {
 380                         /* last byte of buffer */
 381
 382                         if (is_lastmsg(i2c))
 383                                 s3c24xx_i2c_disable_ack(i2c);
 384
 385                 } else if (is_msgend(i2c)) {
 386                         /* ok, we've read the entire buffer, see if there
 387                          * is anything else we need to do */
 388
 389                         if (is_lastmsg(i2c)) {
 390                                 /* last message, send stop and complete */
 391                                 dev_dbg(i2c->dev, "READ: Send Stop\n");
 392
 393                                 s3c24xx_i2c_stop(i2c, 0);
 394                         } else {
 395                                 /* go to the next transfer */
 396                                 dev_dbg(i2c->dev, "READ: Next Transfer\n");
 397
 398                                 i2c->msg_ptr = 0;
 399                                 i2c->msg_idx++;
 400                                 i2c->msg++;
 401                         }
 402                 }
 403
 404                 break;
 405         }
 406
 407         /* acknowlegde the IRQ and get back on with the work */
 408
 409  out_ack:
 410         tmp = readl(i2c->regs + S3C2410_IICCON);
 411         tmp &= ~S3C2410_IICCON_IRQPEND;
 412         writel(tmp, i2c->regs + S3C2410_IICCON);
 413  out:
 414         return ret;
 415 }
 416
 417 /* s3c24xx_i2c_irq
 418  *
 419  * top level IRQ servicing routine
 420 */
 421
 422 static irqreturn_t s3c24xx_i2c_irq(int irqno, void *dev_id)
 423 {
 424         struct s3c24xx_i2c *i2c = dev_id;
 425         unsigned long status;
 426         unsigned long tmp;
 427
 428         status = readl(i2c->regs + S3C2410_IICSTAT);
 429
 430         if (status & S3C2410_IICSTAT_ARBITR) {
 431                 /* deal with arbitration loss */
 432                 dev_err(i2c->dev, "deal with arbitration loss\n");
 433         }
 434
 435         if (i2c->state == STATE_IDLE) {
 436                 dev_dbg(i2c->dev, "IRQ: error i2c->state == IDLE\n");
 437
 438                 tmp = readl(i2c->regs + S3C2410_IICCON);
 439                 tmp &= ~S3C2410_IICCON_IRQPEND;
 440                 writel(tmp, i2c->regs +  S3C2410_IICCON);
 441                 goto out;
 442         }
 443
 444         /* pretty much this leaves us with the fact that we've
 445          * transmitted or received whatever byte we last sent */
 446
 447         i2s_s3c_irq_nextbyte(i2c, status);
 448
 449  out:
 450         return IRQ_HANDLED;
 451 }
 452
 453
 454 /* s3c24xx_i2c_set_master
 455  *
 456  * get the i2c bus for a master transaction
 457 */
 458
 459 static int s3c24xx_i2c_set_master(struct s3c24xx_i2c *i2c)
 460 {
 461         unsigned long iicstat;
 462         int timeout = 400;
 463
 464         while (timeout-- > 0) {
 465                 iicstat = readl(i2c->regs + S3C2410_IICSTAT);
 466
 467                 if (!(iicstat & S3C2410_IICSTAT_BUSBUSY))
 468                         return 0;
 469
 470                 msleep(1);
 471         }
 472
 473         return -ETIMEDOUT;
 474 }
 475
 476 /* s3c24xx_i2c_doxfer
 477  *
 478  * this starts an i2c transfer
 479 */
 480
 481 static int s3c24xx_i2c_doxfer(struct s3c24xx_i2c *i2c,
 482                               struct i2c_msg *msgs, int num)
 483 {
 484         unsigned long timeout;
 485         int ret;
 486
 487         if (i2c->suspended)
 488                 return -EIO;
 489
 490         ret = s3c24xx_i2c_set_master(i2c);
 491         if (ret != 0) {
 492                 dev_err(i2c->dev, "cannot get bus (error %d)\n", ret);
 493                 ret = -EAGAIN;
 494                 goto out;
 495         }
 496
 497         spin_lock_irq(&i2c->lock);
 498
 499         i2c->msg     = msgs;
 500         i2c->msg_num = num;
 501         i2c->msg_ptr = 0;
 502         i2c->msg_idx = 0;
 503         i2c->state   = STATE_START;
 504
 505         s3c24xx_i2c_enable_irq(i2c);
 506         s3c24xx_i2c_message_start(i2c, msgs);
 507         spin_unlock_irq(&i2c->lock);
 508
 509         timeout = wait_event_timeout(i2c->wait, i2c->msg_num == 0, HZ * 5);
 510
 511         ret = i2c->msg_idx;
 512
 513         /* having these next two as dev_err() makes life very
 514          * noisy when doing an i2cdetect */
 515
 516         if (timeout == 0)
 517                 dev_dbg(i2c->dev, "timeout\n");
 518         else if (ret != num)
 519                 dev_dbg(i2c->dev, "incomplete xfer (%d)\n", ret);
 520
 521         /* ensure the stop has been through the bus */
 522
 523         msleep(1);
 524
 525  out:
 526         return ret;
 527 }
 528
 529 /* s3c24xx_i2c_xfer
 530  *
 531  * first port of call from the i2c bus code when an message needs
 532  * transferring across the i2c bus.
 533 */
 534
 535 static int s3c24xx_i2c_xfer(struct i2c_adapter *adap,
 536                         struct i2c_msg *msgs, int num)
 537 {
 538         struct s3c24xx_i2c *i2c = (struct s3c24xx_i2c *)adap->algo_data;
 539         int retry;
 540         int ret;
 541
 542         for (retry = 0; retry < adap->retries; retry++) {
 543
 544                 ret = s3c24xx_i2c_doxfer(i2c, msgs, num);
 545
 546                 if (ret != -EAGAIN)
 547                         return ret;
 548
 549                 dev_dbg(i2c->dev, "Retrying transmission (%d)\n", retry);
 550
 551                 udelay(100);
 552         }
 553
 554         return -EREMOTEIO;
 555 }
 556
 557 /* declare our i2c functionality */
 558 static u32 s3c24xx_i2c_func(struct i2c_adapter *adap)
 559 {
 560         return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL | I2C_FUNC_PROTOCOL_MANGLING;
 561 }
 562
 563 /* i2c bus registration info */
 564
 565 static const struct i2c_algorithm s3c24xx_i2c_algorithm = {
 566         .master_xfer            = s3c24xx_i2c_xfer,
 567         .functionality          = s3c24xx_i2c_func,
 568 };
 569
 570 /* s3c24xx_i2c_calcdivisor
 571  *
 572  * return the divisor settings for a given frequency
 573 */
 574
 575 static int s3c24xx_i2c_calcdivisor(unsigned long clkin, unsigned int wanted,
 576                                    unsigned int *div1, unsigned int *divs)
 577 {
 578         unsigned int calc_divs = clkin / wanted;
 579         unsigned int calc_div1;
 580
 581         if (calc_divs > (16*16))
 582                 calc_div1 = 512;
 583         else
 584                 calc_div1 = 16;
 585
 586         calc_divs += calc_div1-1;
 587         calc_divs /= calc_div1;
 588
 589         if (calc_divs == 0)
 590                 calc_divs = 1;
 591         if (calc_divs > 17)
 592                 calc_divs = 17;
 593
 594         *divs = calc_divs;
 595         *div1 = calc_div1;
 596
 597         return clkin / (calc_divs * calc_div1);
 598 }
 599
 600 /* s3c24xx_i2c_clockrate
 601  *
 602  * work out a divisor for the user requested frequency setting,
 603  * either by the requested frequency, or scanning the acceptable
 604  * range of frequencies until something is found
 605 */
 606
 607 static int s3c24xx_i2c_clockrate(struct s3c24xx_i2c *i2c, unsigned int *got)
 608 {
 609         struct s3c2410_platform_i2c *pdata = i2c->dev->platform_data;
 610         unsigned long clkin = clk_get_rate(i2c->clk);
 611         unsigned int divs, div1;
 612         unsigned long target_frequency;
 613         u32 iiccon;
 614         int freq;
 615
 616         i2c->clkrate = clkin;
 617         clkin /= 1000;          /* clkin now in KHz */
 618
 619         dev_dbg(i2c->dev, "pdata desired frequency %lu\n", pdata->frequency);
 620
 621         target_frequency = pdata->frequency ? pdata->frequency : 100000;
 622
 623         target_frequency /= 1000; /* Target frequency now in KHz */
 624
 625         freq = s3c24xx_i2c_calcdivisor(clkin, target_frequency, &div1, &divs);
 626
 627         if (freq > target_frequency) {
 628                 dev_err(i2c->dev,
 629                         "Unable to achieve desired frequency %luKHz."   \
 630                         " Lowest achievable %dKHz\n", target_frequency, freq);
 631                 return -EINVAL;
 632         }
 633
 634         *got = freq;
 635
 636         iiccon = readl(i2c->regs + S3C2410_IICCON);
 637         iiccon &= ~(S3C2410_IICCON_SCALEMASK | S3C2410_IICCON_TXDIV_512);
 638         iiccon |= (divs-1);
 639
 640         if (div1 == 512)
 641                 iiccon |= S3C2410_IICCON_TXDIV_512;
 642
 643         writel(iiccon, i2c->regs + S3C2410_IICCON);
 644
 645         if (s3c24xx_i2c_is2440(i2c)) {
 646                 unsigned long sda_delay;
 647
 648                 if (pdata->sda_delay) {
 649                         sda_delay = (freq / 1000) * pdata->sda_delay;
 650                         sda_delay /= 1000000;
 651                         sda_delay = DIV_ROUND_UP(sda_delay, 5);
 652                         if (sda_delay > 3)
 653                                 sda_delay = 3;
 654                         sda_delay |= S3C2410_IICLC_FILTER_ON;
 655                 } else
 656                         sda_delay = 0;
 657
 658                 dev_dbg(i2c->dev, "IICLC=%08lx\n", sda_delay);
 659                 writel(sda_delay, i2c->regs + S3C2440_IICLC);
 660         }
 661
 662         return 0;
 663 }
 664
 665 #ifdef CONFIG_CPU_FREQ
 666
 667 #define freq_to_i2c(_n) container_of(_n, struct s3c24xx_i2c, freq_transition)
 668
 669 static int s3c24xx_i2c_cpufreq_transition(struct notifier_block *nb,
 670                                           unsigned long val, void *data)
 671 {
 672         struct s3c24xx_i2c *i2c = freq_to_i2c(nb);
 673         unsigned long flags;
 674         unsigned int got;
 675         int delta_f;
 676         int ret;
 677
 678         delta_f = clk_get_rate(i2c->clk) - i2c->clkrate;
 679
 680         /* if we're post-change and the input clock has slowed down
 681          * or at pre-change and the clock is about to speed up, then
 682          * adjust our clock rate. <0 is slow, >0 speedup.
 683          */
 684
 685         if ((val == CPUFREQ_POSTCHANGE && delta_f < 0) ||
 686             (val == CPUFREQ_PRECHANGE && delta_f > 0)) {
 687                 spin_lock_irqsave(&i2c->lock, flags);
 688                 ret = s3c24xx_i2c_clockrate(i2c, &got);
 689                 spin_unlock_irqrestore(&i2c->lock, flags);
 690
 691                 if (ret < 0)
 692                         dev_err(i2c->dev, "cannot find frequency\n");
 693                 else
 694                         dev_info(i2c->dev, "setting freq %d\n", got);
 695         }
 696
 697         return 0;
 698 }
 699
 700 static inline int s3c24xx_i2c_register_cpufreq(struct s3c24xx_i2c *i2c)
 701 {
 702         i2c->freq_transition.notifier_call = s3c24xx_i2c_cpufreq_transition;
 703
 704         return cpufreq_register_notifier(&i2c->freq_transition,
 705                                          CPUFREQ_TRANSITION_NOTIFIER);
 706 }
 707
 708 static inline void s3c24xx_i2c_deregister_cpufreq(struct s3c24xx_i2c *i2c)
 709 {
 710         cpufreq_unregister_notifier(&i2c->freq_transition,
 711                                     CPUFREQ_TRANSITION_NOTIFIER);
 712 }
 713
 714 #else
 715 static inline int s3c24xx_i2c_register_cpufreq(struct s3c24xx_i2c *i2c)
 716 {
 717         return 0;
 718 }
 719
 720 static inline void s3c24xx_i2c_deregister_cpufreq(struct s3c24xx_i2c *i2c)
 721 {
 722 }
 723 #endif
 724
 725 /* s3c24xx_i2c_init
 726  *
 727  * initialise the controller, set the IO lines and frequency
 728 */
 729
 730 static int s3c24xx_i2c_init(struct s3c24xx_i2c *i2c)
 731 {
 732         unsigned long iicon = S3C2410_IICCON_IRQEN | S3C2410_IICCON_ACKEN;
 733         struct s3c2410_platform_i2c *pdata;
 734         unsigned int freq;
 735
 736         /* get the plafrom data */
 737
 738         pdata = i2c->dev->platform_data;
 739
 740         /* inititalise the gpio */
 741
 742         if (pdata->cfg_gpio)
 743                 pdata->cfg_gpio(to_platform_device(i2c->dev));
 744
 745         /* write slave address */
 746
 747         writeb(pdata->slave_addr, i2c->regs + S3C2410_IICADD);
 748
 749         dev_info(i2c->dev, "slave address 0x%02x\n", pdata->slave_addr);
 750
 751         writel(iicon, i2c->regs + S3C2410_IICCON);
 752
 753         /* we need to work out the divisors for the clock... */
 754
 755         if (s3c24xx_i2c_clockrate(i2c, &freq) != 0) {
 756                 writel(0, i2c->regs + S3C2410_IICCON);
 757                 dev_err(i2c->dev, "cannot meet bus frequency required\n");
 758                 return -EINVAL;
 759         }
 760
 761         /* todo - check that the i2c lines aren't being dragged anywhere */
 762
 763         dev_info(i2c->dev, "bus frequency set to %d KHz\n", freq);
 764         dev_dbg(i2c->dev, "S3C2410_IICCON=0x%02lx\n", iicon);
 765
 766         /* check for s3c2440 i2c controller  */
 767
 768         if (s3c24xx_i2c_is2440(i2c))
 769                 writel(0x0, i2c->regs + S3C2440_IICLC);
 770
 771         return 0;
 772 }
 773
 774 /* s3c24xx_i2c_probe
 775  *
 776  * called by the bus driver when a suitable device is found
 777 */
 778
 779 static int s3c24xx_i2c_probe(struct platform_device *pdev)
 780 {
 781         struct s3c24xx_i2c *i2c;
 782         struct s3c2410_platform_i2c *pdata;
 783         struct resource *res;
 784         int ret;
 785
 786         pdata = pdev->dev.platform_data;
 787         if (!pdata) {
 788                 dev_err(&pdev->dev, "no platform data\n");
 789                 return -EINVAL;
 790         }
 791
 792         i2c = kzalloc(sizeof(struct s3c24xx_i2c), GFP_KERNEL);
 793         if (!i2c) {
 794                 dev_err(&pdev->dev, "no memory for state\n");
 795                 return -ENOMEM;
 796         }
 797
 798         strlcpy(i2c->adap.name, "s3c2410-i2c", sizeof(i2c->adap.name));
 799         i2c->adap.owner   = THIS_MODULE;
 800         i2c->adap.algo    = &s3c24xx_i2c_algorithm;
 801         i2c->adap.retries = 2;
 802         i2c->adap.class   = I2C_CLASS_HWMON | I2C_CLASS_SPD;
 803         i2c->tx_setup     = 50;
 804
 805         spin_lock_init(&i2c->lock);
 806         init_waitqueue_head(&i2c->wait);
 807
 808         /* find the clock and enable it */
 809
 810         i2c->dev = &pdev->dev;
 811         i2c->clk = clk_get(&pdev->dev, "i2c");
 812         if (IS_ERR(i2c->clk)) {
 813                 dev_err(&pdev->dev, "cannot get clock\n");
 814                 ret = -ENOENT;
 815                 goto err_noclk;
 816         }
 817
 818         dev_dbg(&pdev->dev, "clock source %p\n", i2c->clk);
 819
 820         clk_enable(i2c->clk);
 821
 822         /* map the registers */
 823
 824         res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 825         if (res == NULL) {
 826                 dev_err(&pdev->dev, "cannot find IO resource\n");
 827                 ret = -ENOENT;
 828                 goto err_clk;
 829         }
 830
 831         i2c->ioarea = request_mem_region(res->start, resource_size(res),
 832                                          pdev->name);
 833
 834         if (i2c->ioarea == NULL) {
 835                 dev_err(&pdev->dev, "cannot request IO\n");
 836                 ret = -ENXIO;
 837                 goto err_clk;
 838         }
 839
 840         i2c->regs = ioremap(res->start, resource_size(res));
 841
 842         if (i2c->regs == NULL) {
 843                 dev_err(&pdev->dev, "cannot map IO\n");
 844                 ret = -ENXIO;
 845                 goto err_ioarea;
 846         }
 847
 848         dev_dbg(&pdev->dev, "registers %p (%p, %p)\n",
 849                 i2c->regs, i2c->ioarea, res);
 850
 851         /* setup info block for the i2c core */
 852
 853         i2c->adap.algo_data = i2c;
 854         i2c->adap.dev.parent = &pdev->dev;
 855
 856         /* initialise the i2c controller */
 857
 858         ret = s3c24xx_i2c_init(i2c);
 859         if (ret != 0)
 860                 goto err_iomap;
 861
 862         /* find the IRQ for this unit (note, this relies on the init call to
 863          * ensure no current IRQs pending
 864          */
 865
 866         i2c->irq = ret = platform_get_irq(pdev, 0);
 867         if (ret <= 0) {
 868                 dev_err(&pdev->dev, "cannot find IRQ\n");
 869                 goto err_iomap;
 870         }
 871
 872         ret = request_irq(i2c->irq, s3c24xx_i2c_irq, IRQF_DISABLED,
 873                           dev_name(&pdev->dev), i2c);
 874
 875         if (ret != 0) {
 876                 dev_err(&pdev->dev, "cannot claim IRQ %d\n", i2c->irq);
 877                 goto err_iomap;
 878         }
 879
 880         ret = s3c24xx_i2c_register_cpufreq(i2c);
 881         if (ret < 0) {
 882                 dev_err(&pdev->dev, "failed to register cpufreq notifier\n");
 883                 goto err_irq;
 884         }
 885
 886         /* Note, previous versions of the driver used i2c_add_adapter()
 887          * to add the bus at any number. We now pass the bus number via
 888          * the platform data, so if unset it will now default to always
 889          * being bus 0.
 890          */
 891
 892         i2c->adap.nr = pdata->bus_num;
 893
 894         ret = i2c_add_numbered_adapter(&i2c->adap);
 895         if (ret < 0) {
 896                 dev_err(&pdev->dev, "failed to add bus to i2c core\n");
 897                 goto err_cpufreq;
 898         }
 899
 900         platform_set_drvdata(pdev, i2c);
 901
 902         dev_info(&pdev->dev, "%s: S3C I2C adapter\n", dev_name(&i2c->adap.dev));
 903         return 0;
 904
 905  err_cpufreq:
 906         s3c24xx_i2c_deregister_cpufreq(i2c);
 907
 908  err_irq:
 909         free_irq(i2c->irq, i2c);
 910
 911  err_iomap:
 912         iounmap(i2c->regs);
 913
 914  err_ioarea:
 915         release_resource(i2c->ioarea);
 916         kfree(i2c->ioarea);
 917
 918  err_clk:
 919         clk_disable(i2c->clk);
 920         clk_put(i2c->clk);
 921
 922  err_noclk:
 923         kfree(i2c);
 924         return ret;
 925 }
 926
 927 /* s3c24xx_i2c_remove
 928  *
 929  * called when device is removed from the bus
 930 */
 931
 932 static int s3c24xx_i2c_remove(struct platform_device *pdev)
 933 {
 934         struct s3c24xx_i2c *i2c = platform_get_drvdata(pdev);
 935
 936         s3c24xx_i2c_deregister_cpufreq(i2c);
 937
 938         i2c_del_adapter(&i2c->adap);
 939         free_irq(i2c->irq, i2c);
 940
 941         clk_disable(i2c->clk);
 942         clk_put(i2c->clk);
 943
 944         iounmap(i2c->regs);
 945
 946         release_resource(i2c->ioarea);
 947         kfree(i2c->ioarea);
 948         kfree(i2c);
 949
 950         return 0;
 951 }
 952
 953 #ifdef CONFIG_PM
 954 static int s3c24xx_i2c_suspend_late(struct platform_device *dev,
 955                                     pm_message_t msg)
 956 {
 957         struct s3c24xx_i2c *i2c = platform_get_drvdata(dev);
 958         i2c->suspended = 1;
 959         return 0;
 960 }
 961
 962 static int s3c24xx_i2c_resume(struct platform_device *dev)
 963 {
 964         struct s3c24xx_i2c *i2c = platform_get_drvdata(dev);
 965
 966         i2c->suspended = 0;
 967         s3c24xx_i2c_init(i2c);
 968
 969         return 0;
 970 }
 971
 972 #else
 973 #define s3c24xx_i2c_suspend_late NULL
 974 #define s3c24xx_i2c_resume NULL
 975 #endif
 976
 977 /* device driver for platform bus bits */
 978
 979 static struct platform_device_id s3c24xx_driver_ids[] = {
 980         {
 981                 .name           = "s3c2410-i2c",
 982                 .driver_data    = TYPE_S3C2410,
 983         }, {
 984                 .name           = "s3c2440-i2c",
 985                 .driver_data    = TYPE_S3C2440,
 986         }, { },
 987 };
 988 MODULE_DEVICE_TABLE(platform, s3c24xx_driver_ids);
 989
 990 static struct platform_driver s3c24xx_i2c_driver = {
 991         .probe          = s3c24xx_i2c_probe,
 992         .remove         = s3c24xx_i2c_remove,
 993         .suspend_late   = s3c24xx_i2c_suspend_late,
 994         .resume         = s3c24xx_i2c_resume,
 995         .id_table       = s3c24xx_driver_ids,
 996         .driver         = {
 997                 .owner  = THIS_MODULE,
 998                 .name   = "s3c-i2c",
 999         },
1000 };
1001
1002 static int __init i2c_adap_s3c_init(void)
1003 {
1004         return platform_driver_register(&s3c24xx_i2c_driver);
1005 }
1006 subsys_initcall(i2c_adap_s3c_init);
1007
1008 static void __exit i2c_adap_s3c_exit(void)
1009 {
1010         platform_driver_unregister(&s3c24xx_i2c_driver);
1011 }
1012 module_exit(i2c_adap_s3c_exit);
1013
1014 MODULE_DESCRIPTION("S3C24XX I2C Bus driver");
1015 MODULE_AUTHOR("Ben Dooks, <ben@simtec.co.uk>");
1016 MODULE_LICENSE("GPL");