git.oblomov.eu Git - linux-2.6/blob - drivers/serial/8250_pci.c

   1 /*
   2  *  linux/drivers/char/8250_pci.c
   3  *
   4  *  Probe module for 8250/16550-type PCI serial ports.
   5  *
   6  *  Based on drivers/char/serial.c, by Linus Torvalds, Theodore Ts'o.
   7  *
   8  *  Copyright (C) 2001 Russell King, All Rights Reserved.
   9  *
  10  * This program is free software; you can redistribute it and/or modify
  11  * it under the terms of the GNU General Public License as published by
  12  * the Free Software Foundation; either version 2 of the License.
  13  *
  14  *  $Id: 8250_pci.c,v 1.28 2002/11/02 11:14:18 rmk Exp $
  15  */
  16 #include <linux/module.h>
  17 #include <linux/init.h>
  18 #include <linux/pci.h>
  19 #include <linux/sched.h>
  20 #include <linux/string.h>
  21 #include <linux/kernel.h>
  22 #include <linux/slab.h>
  23 #include <linux/delay.h>
  24 #include <linux/tty.h>
  25 #include <linux/serial_core.h>
  26 #include <linux/8250_pci.h>
  27 #include <linux/bitops.h>
  28
  29 #include <asm/byteorder.h>
  30 #include <asm/io.h>
  31
  32 #include "8250.h"
  33
  34 #undef SERIAL_DEBUG_PCI
  35
  36 /*
  37  * init function returns:
  38  *  > 0 - number of ports
  39  *  = 0 - use board->num_ports
  40  *  < 0 - error
  41  */
  42 struct pci_serial_quirk {
  43         u32     vendor;
  44         u32     device;
  45         u32     subvendor;
  46         u32     subdevice;
  47         int     (*init)(struct pci_dev *dev);
  48         int     (*setup)(struct serial_private *, struct pciserial_board *,
  49                          struct uart_port *, int);
  50         void    (*exit)(struct pci_dev *dev);
  51 };
  52
  53 #define PCI_NUM_BAR_RESOURCES   6
  54
  55 struct serial_private {
  56         struct pci_dev          *dev;
  57         unsigned int            nr;
  58         void __iomem            *remapped_bar[PCI_NUM_BAR_RESOURCES];
  59         struct pci_serial_quirk *quirk;
  60         int                     line[0];
  61 };
  62
  63 static void moan_device(const char *str, struct pci_dev *dev)
  64 {
  65         printk(KERN_WARNING "%s: %s\n"
  66                KERN_WARNING "Please send the output of lspci -vv, this\n"
  67                KERN_WARNING "message (0x%04x,0x%04x,0x%04x,0x%04x), the\n"
  68                KERN_WARNING "manufacturer and name of serial board or\n"
  69                KERN_WARNING "modem board to rmk+serial@arm.linux.org.uk.\n",
  70                pci_name(dev), str, dev->vendor, dev->device,
  71                dev->subsystem_vendor, dev->subsystem_device);
  72 }
  73
  74 static int
  75 setup_port(struct serial_private *priv, struct uart_port *port,
  76            int bar, int offset, int regshift)
  77 {
  78         struct pci_dev *dev = priv->dev;
  79         unsigned long base, len;
  80
  81         if (bar >= PCI_NUM_BAR_RESOURCES)
  82                 return -EINVAL;
  83
  84         base = pci_resource_start(dev, bar);
  85
  86         if (pci_resource_flags(dev, bar) & IORESOURCE_MEM) {
  87                 len =  pci_resource_len(dev, bar);
  88
  89                 if (!priv->remapped_bar[bar])
  90                         priv->remapped_bar[bar] = ioremap(base, len);
  91                 if (!priv->remapped_bar[bar])
  92                         return -ENOMEM;
  93
  94                 port->iotype = UPIO_MEM;
  95                 port->iobase = 0;
  96                 port->mapbase = base + offset;
  97                 port->membase = priv->remapped_bar[bar] + offset;
  98                 port->regshift = regshift;
  99         } else {
 100                 port->iotype = UPIO_PORT;
 101                 port->iobase = base + offset;
 102                 port->mapbase = 0;
 103                 port->membase = NULL;
 104                 port->regshift = 0;
 105         }
 106         return 0;
 107 }
 108
 109 /*
 110  * AFAVLAB uses a different mixture of BARs and offsets
 111  * Not that ugly ;) -- HW
 112  */
 113 static int
 114 afavlab_setup(struct serial_private *priv, struct pciserial_board *board,
 115               struct uart_port *port, int idx)
 116 {
 117         unsigned int bar, offset = board->first_offset;
 118
 119         bar = FL_GET_BASE(board->flags);
 120         if (idx < 4)
 121                 bar += idx;
 122         else {
 123                 bar = 4;
 124                 offset += (idx - 4) * board->uart_offset;
 125         }
 126
 127         return setup_port(priv, port, bar, offset, board->reg_shift);
 128 }
 129
 130 /*
 131  * HP's Remote Management Console.  The Diva chip came in several
 132  * different versions.  N-class, L2000 and A500 have two Diva chips, each
 133  * with 3 UARTs (the third UART on the second chip is unused).  Superdome
 134  * and Keystone have one Diva chip with 3 UARTs.  Some later machines have
 135  * one Diva chip, but it has been expanded to 5 UARTs.
 136  */
 137 static int __devinit pci_hp_diva_init(struct pci_dev *dev)
 138 {
 139         int rc = 0;
 140
 141         switch (dev->subsystem_device) {
 142         case PCI_DEVICE_ID_HP_DIVA_TOSCA1:
 143         case PCI_DEVICE_ID_HP_DIVA_HALFDOME:
 144         case PCI_DEVICE_ID_HP_DIVA_KEYSTONE:
 145         case PCI_DEVICE_ID_HP_DIVA_EVEREST:
 146                 rc = 3;
 147                 break;
 148         case PCI_DEVICE_ID_HP_DIVA_TOSCA2:
 149                 rc = 2;
 150                 break;
 151         case PCI_DEVICE_ID_HP_DIVA_MAESTRO:
 152                 rc = 4;
 153                 break;
 154         case PCI_DEVICE_ID_HP_DIVA_POWERBAR:
 155                 rc = 1;
 156                 break;
 157         }
 158
 159         return rc;
 160 }
 161
 162 /*
 163  * HP's Diva chip puts the 4th/5th serial port further out, and
 164  * some serial ports are supposed to be hidden on certain models.
 165  */
 166 static int
 167 pci_hp_diva_setup(struct serial_private *priv, struct pciserial_board *board,
 168               struct uart_port *port, int idx)
 169 {
 170         unsigned int offset = board->first_offset;
 171         unsigned int bar = FL_GET_BASE(board->flags);
 172
 173         switch (priv->dev->subsystem_device) {
 174         case PCI_DEVICE_ID_HP_DIVA_MAESTRO:
 175                 if (idx == 3)
 176                         idx++;
 177                 break;
 178         case PCI_DEVICE_ID_HP_DIVA_EVEREST:
 179                 if (idx > 0)
 180                         idx++;
 181                 if (idx > 2)
 182                         idx++;
 183                 break;
 184         }
 185         if (idx > 2)
 186                 offset = 0x18;
 187
 188         offset += idx * board->uart_offset;
 189
 190         return setup_port(priv, port, bar, offset, board->reg_shift);
 191 }
 192
 193 /*
 194  * Added for EKF Intel i960 serial boards
 195  */
 196 static int __devinit pci_inteli960ni_init(struct pci_dev *dev)
 197 {
 198         unsigned long oldval;
 199
 200         if (!(dev->subsystem_device & 0x1000))
 201                 return -ENODEV;
 202
 203         /* is firmware started? */
 204         pci_read_config_dword(dev, 0x44, (void*) &oldval);
 205         if (oldval == 0x00001000L) { /* RESET value */
 206                 printk(KERN_DEBUG "Local i960 firmware missing");
 207                 return -ENODEV;
 208         }
 209         return 0;
 210 }
 211
 212 /*
 213  * Some PCI serial cards using the PLX 9050 PCI interface chip require
 214  * that the card interrupt be explicitly enabled or disabled.  This
 215  * seems to be mainly needed on card using the PLX which also use I/O
 216  * mapped memory.
 217  */
 218 static int __devinit pci_plx9050_init(struct pci_dev *dev)
 219 {
 220         u8 irq_config;
 221         void __iomem *p;
 222
 223         if ((pci_resource_flags(dev, 0) & IORESOURCE_MEM) == 0) {
 224                 moan_device("no memory in bar 0", dev);
 225                 return 0;
 226         }
 227
 228         irq_config = 0x41;
 229         if (dev->vendor == PCI_VENDOR_ID_PANACOM)
 230                 irq_config = 0x43;
 231         if ((dev->vendor == PCI_VENDOR_ID_PLX) &&
 232             (dev->device == PCI_DEVICE_ID_PLX_ROMULUS)) {
 233                 /*
 234                  * As the megawolf cards have the int pins active
 235                  * high, and have 2 UART chips, both ints must be
 236                  * enabled on the 9050. Also, the UARTS are set in
 237                  * 16450 mode by default, so we have to enable the
 238                  * 16C950 'enhanced' mode so that we can use the
 239                  * deep FIFOs
 240                  */
 241                 irq_config = 0x5b;
 242         }
 243
 244         /*
 245          * enable/disable interrupts
 246          */
 247         p = ioremap(pci_resource_start(dev, 0), 0x80);
 248         if (p == NULL)
 249                 return -ENOMEM;
 250         writel(irq_config, p + 0x4c);
 251
 252         /*
 253          * Read the register back to ensure that it took effect.
 254          */
 255         readl(p + 0x4c);
 256         iounmap(p);
 257
 258         return 0;
 259 }
 260
 261 static void __devexit pci_plx9050_exit(struct pci_dev *dev)
 262 {
 263         u8 __iomem *p;
 264
 265         if ((pci_resource_flags(dev, 0) & IORESOURCE_MEM) == 0)
 266                 return;
 267
 268         /*
 269          * disable interrupts
 270          */
 271         p = ioremap(pci_resource_start(dev, 0), 0x80);
 272         if (p != NULL) {
 273                 writel(0, p + 0x4c);
 274
 275                 /*
 276                  * Read the register back to ensure that it took effect.
 277                  */
 278                 readl(p + 0x4c);
 279                 iounmap(p);
 280         }
 281 }
 282
 283 /* SBS Technologies Inc. PMC-OCTPRO and P-OCTAL cards */
 284 static int
 285 sbs_setup(struct serial_private *priv, struct pciserial_board *board,
 286                 struct uart_port *port, int idx)
 287 {
 288         unsigned int bar, offset = board->first_offset;
 289
 290         bar = 0;
 291
 292         if (idx < 4) {
 293                 /* first four channels map to 0, 0x100, 0x200, 0x300 */
 294                 offset += idx * board->uart_offset;
 295         } else if (idx < 8) {
 296                 /* last four channels map to 0x1000, 0x1100, 0x1200, 0x1300 */
 297                 offset += idx * board->uart_offset + 0xC00;
 298         } else /* we have only 8 ports on PMC-OCTALPRO */
 299                 return 1;
 300
 301         return setup_port(priv, port, bar, offset, board->reg_shift);
 302 }
 303
 304 /*
 305 * This does initialization for PMC OCTALPRO cards:
 306 * maps the device memory, resets the UARTs (needed, bc
 307 * if the module is removed and inserted again, the card
 308 * is in the sleep mode) and enables global interrupt.
 309 */
 310
 311 /* global control register offset for SBS PMC-OctalPro */
 312 #define OCT_REG_CR_OFF          0x500
 313
 314 static int __devinit sbs_init(struct pci_dev *dev)
 315 {
 316         u8 __iomem *p;
 317
 318         p = ioremap(pci_resource_start(dev, 0),pci_resource_len(dev,0));
 319
 320         if (p == NULL)
 321                 return -ENOMEM;
 322         /* Set bit-4 Control Register (UART RESET) in to reset the uarts */
 323         writeb(0x10,p + OCT_REG_CR_OFF);
 324         udelay(50);
 325         writeb(0x0,p + OCT_REG_CR_OFF);
 326
 327         /* Set bit-2 (INTENABLE) of Control Register */
 328         writeb(0x4, p + OCT_REG_CR_OFF);
 329         iounmap(p);
 330
 331         return 0;
 332 }
 333
 334 /*
 335  * Disables the global interrupt of PMC-OctalPro
 336  */
 337
 338 static void __devexit sbs_exit(struct pci_dev *dev)
 339 {
 340         u8 __iomem *p;
 341
 342         p = ioremap(pci_resource_start(dev, 0),pci_resource_len(dev,0));
 343         if (p != NULL) {
 344                 writeb(0, p + OCT_REG_CR_OFF);
 345         }
 346         iounmap(p);
 347 }
 348
 349 /*
 350  * SIIG serial cards have an PCI interface chip which also controls
 351  * the UART clocking frequency. Each UART can be clocked independently
 352  * (except cards equiped with 4 UARTs) and initial clocking settings
 353  * are stored in the EEPROM chip. It can cause problems because this
 354  * version of serial driver doesn't support differently clocked UART's
 355  * on single PCI card. To prevent this, initialization functions set
 356  * high frequency clocking for all UART's on given card. It is safe (I
 357  * hope) because it doesn't touch EEPROM settings to prevent conflicts
 358  * with other OSes (like M$ DOS).
 359  *
 360  *  SIIG support added by Andrey Panin <pazke@donpac.ru>, 10/1999
 361  *
 362  * There is two family of SIIG serial cards with different PCI
 363  * interface chip and different configuration methods:
 364  *     - 10x cards have control registers in IO and/or memory space;
 365  *     - 20x cards have control registers in standard PCI configuration space.
 366  *
 367  * Note: all 10x cards have PCI device ids 0x10..
 368  *       all 20x cards have PCI device ids 0x20..
 369  *
 370  * There are also Quartet Serial cards which use Oxford Semiconductor
 371  * 16954 quad UART PCI chip clocked by 18.432 MHz quartz.
 372  *
 373  * Note: some SIIG cards are probed by the parport_serial object.
 374  */
 375
 376 #define PCI_DEVICE_ID_SIIG_1S_10x (PCI_DEVICE_ID_SIIG_1S_10x_550 & 0xfffc)
 377 #define PCI_DEVICE_ID_SIIG_2S_10x (PCI_DEVICE_ID_SIIG_2S_10x_550 & 0xfff8)
 378
 379 static int pci_siig10x_init(struct pci_dev *dev)
 380 {
 381         u16 data;
 382         void __iomem *p;
 383
 384         switch (dev->device & 0xfff8) {
 385         case PCI_DEVICE_ID_SIIG_1S_10x: /* 1S */
 386                 data = 0xffdf;
 387                 break;
 388         case PCI_DEVICE_ID_SIIG_2S_10x: /* 2S, 2S1P */
 389                 data = 0xf7ff;
 390                 break;
 391         default:                        /* 1S1P, 4S */
 392                 data = 0xfffb;
 393                 break;
 394         }
 395
 396         p = ioremap(pci_resource_start(dev, 0), 0x80);
 397         if (p == NULL)
 398                 return -ENOMEM;
 399
 400         writew(readw(p + 0x28) & data, p + 0x28);
 401         readw(p + 0x28);
 402         iounmap(p);
 403         return 0;
 404 }
 405
 406 #define PCI_DEVICE_ID_SIIG_2S_20x (PCI_DEVICE_ID_SIIG_2S_20x_550 & 0xfffc)
 407 #define PCI_DEVICE_ID_SIIG_2S1P_20x (PCI_DEVICE_ID_SIIG_2S1P_20x_550 & 0xfffc)
 408
 409 static int pci_siig20x_init(struct pci_dev *dev)
 410 {
 411         u8 data;
 412
 413         /* Change clock frequency for the first UART. */
 414         pci_read_config_byte(dev, 0x6f, &data);
 415         pci_write_config_byte(dev, 0x6f, data & 0xef);
 416
 417         /* If this card has 2 UART, we have to do the same with second UART. */
 418         if (((dev->device & 0xfffc) == PCI_DEVICE_ID_SIIG_2S_20x) ||
 419             ((dev->device & 0xfffc) == PCI_DEVICE_ID_SIIG_2S1P_20x)) {
 420                 pci_read_config_byte(dev, 0x73, &data);
 421                 pci_write_config_byte(dev, 0x73, data & 0xef);
 422         }
 423         return 0;
 424 }
 425
 426 static int pci_siig_init(struct pci_dev *dev)
 427 {
 428         unsigned int type = dev->device & 0xff00;
 429
 430         if (type == 0x1000)
 431                 return pci_siig10x_init(dev);
 432         else if (type == 0x2000)
 433                 return pci_siig20x_init(dev);
 434
 435         moan_device("Unknown SIIG card", dev);
 436         return -ENODEV;
 437 }
 438
 439 /*
 440  * Timedia has an explosion of boards, and to avoid the PCI table from
 441  * growing *huge*, we use this function to collapse some 70 entries
 442  * in the PCI table into one, for sanity's and compactness's sake.
 443  */
 444 static unsigned short timedia_single_port[] = {
 445         0x4025, 0x4027, 0x4028, 0x5025, 0x5027, 0
 446 };
 447
 448 static unsigned short timedia_dual_port[] = {
 449         0x0002, 0x4036, 0x4037, 0x4038, 0x4078, 0x4079, 0x4085,
 450         0x4088, 0x4089, 0x5037, 0x5078, 0x5079, 0x5085, 0x6079,
 451         0x7079, 0x8079, 0x8137, 0x8138, 0x8237, 0x8238, 0x9079,
 452         0x9137, 0x9138, 0x9237, 0x9238, 0xA079, 0xB079, 0xC079,
 453         0xD079, 0
 454 };
 455
 456 static unsigned short timedia_quad_port[] = {
 457         0x4055, 0x4056, 0x4095, 0x4096, 0x5056, 0x8156, 0x8157,
 458         0x8256, 0x8257, 0x9056, 0x9156, 0x9157, 0x9158, 0x9159,
 459         0x9256, 0x9257, 0xA056, 0xA157, 0xA158, 0xA159, 0xB056,
 460         0xB157, 0
 461 };
 462
 463 static unsigned short timedia_eight_port[] = {
 464         0x4065, 0x4066, 0x5065, 0x5066, 0x8166, 0x9066, 0x9166,
 465         0x9167, 0x9168, 0xA066, 0xA167, 0xA168, 0
 466 };
 467
 468 static struct timedia_struct {
 469         int num;
 470         unsigned short *ids;
 471 } timedia_data[] = {
 472         { 1, timedia_single_port },
 473         { 2, timedia_dual_port },
 474         { 4, timedia_quad_port },
 475         { 8, timedia_eight_port },
 476         { 0, NULL }
 477 };
 478
 479 static int __devinit pci_timedia_init(struct pci_dev *dev)
 480 {
 481         unsigned short *ids;
 482         int i, j;
 483
 484         for (i = 0; timedia_data[i].num; i++) {
 485                 ids = timedia_data[i].ids;
 486                 for (j = 0; ids[j]; j++)
 487                         if (dev->subsystem_device == ids[j])
 488                                 return timedia_data[i].num;
 489         }
 490         return 0;
 491 }
 492
 493 /*
 494  * Timedia/SUNIX uses a mixture of BARs and offsets
 495  * Ugh, this is ugly as all hell --- TYT
 496  */
 497 static int
 498 pci_timedia_setup(struct serial_private *priv, struct pciserial_board *board,
 499                   struct uart_port *port, int idx)
 500 {
 501         unsigned int bar = 0, offset = board->first_offset;
 502
 503         switch (idx) {
 504         case 0:
 505                 bar = 0;
 506                 break;
 507         case 1:
 508                 offset = board->uart_offset;
 509                 bar = 0;
 510                 break;
 511         case 2:
 512                 bar = 1;
 513                 break;
 514         case 3:
 515                 offset = board->uart_offset;
 516                 bar = 1;
 517         case 4: /* BAR 2 */
 518         case 5: /* BAR 3 */
 519         case 6: /* BAR 4 */
 520         case 7: /* BAR 5 */
 521                 bar = idx - 2;
 522         }
 523
 524         return setup_port(priv, port, bar, offset, board->reg_shift);
 525 }
 526
 527 /*
 528  * Some Titan cards are also a little weird
 529  */
 530 static int
 531 titan_400l_800l_setup(struct serial_private *priv,
 532                       struct pciserial_board *board,
 533                       struct uart_port *port, int idx)
 534 {
 535         unsigned int bar, offset = board->first_offset;
 536
 537         switch (idx) {
 538         case 0:
 539                 bar = 1;
 540                 break;
 541         case 1:
 542                 bar = 2;
 543                 break;
 544         default:
 545                 bar = 4;
 546                 offset = (idx - 2) * board->uart_offset;
 547         }
 548
 549         return setup_port(priv, port, bar, offset, board->reg_shift);
 550 }
 551
 552 static int __devinit pci_xircom_init(struct pci_dev *dev)
 553 {
 554         msleep(100);
 555         return 0;
 556 }
 557
 558 static int __devinit pci_netmos_init(struct pci_dev *dev)
 559 {
 560         /* subdevice 0x00PS means <P> parallel, <S> serial */
 561         unsigned int num_serial = dev->subsystem_device & 0xf;
 562
 563         if (num_serial == 0)
 564                 return -ENODEV;
 565         return num_serial;
 566 }
 567
 568 static int
 569 pci_default_setup(struct serial_private *priv, struct pciserial_board *board,
 570                   struct uart_port *port, int idx)
 571 {
 572         unsigned int bar, offset = board->first_offset, maxnr;
 573
 574         bar = FL_GET_BASE(board->flags);
 575         if (board->flags & FL_BASE_BARS)
 576                 bar += idx;
 577         else
 578                 offset += idx * board->uart_offset;
 579
 580         maxnr = (pci_resource_len(priv->dev, bar) - board->first_offset) /
 581                 (8 << board->reg_shift);
 582
 583         if (board->flags & FL_REGION_SZ_CAP && idx >= maxnr)
 584                 return 1;
 585
 586         return setup_port(priv, port, bar, offset, board->reg_shift);
 587 }
 588
 589 /* This should be in linux/pci_ids.h */
 590 #define PCI_VENDOR_ID_SBSMODULARIO      0x124B
 591 #define PCI_SUBVENDOR_ID_SBSMODULARIO   0x124B
 592 #define PCI_DEVICE_ID_OCTPRO            0x0001
 593 #define PCI_SUBDEVICE_ID_OCTPRO232      0x0108
 594 #define PCI_SUBDEVICE_ID_OCTPRO422      0x0208
 595 #define PCI_SUBDEVICE_ID_POCTAL232      0x0308
 596 #define PCI_SUBDEVICE_ID_POCTAL422      0x0408
 597
 598 /*
 599  * Master list of serial port init/setup/exit quirks.
 600  * This does not describe the general nature of the port.
 601  * (ie, baud base, number and location of ports, etc)
 602  *
 603  * This list is ordered alphabetically by vendor then device.
 604  * Specific entries must come before more generic entries.
 605  */
 606 static struct pci_serial_quirk pci_serial_quirks[] = {
 607         /*
 608          * AFAVLAB cards.
 609          *  It is not clear whether this applies to all products.
 610          */
 611         {
 612                 .vendor         = PCI_VENDOR_ID_AFAVLAB,
 613                 .device         = PCI_ANY_ID,
 614                 .subvendor      = PCI_ANY_ID,
 615                 .subdevice      = PCI_ANY_ID,
 616                 .setup          = afavlab_setup,
 617         },
 618         /*
 619          * HP Diva
 620          */
 621         {
 622                 .vendor         = PCI_VENDOR_ID_HP,
 623                 .device         = PCI_DEVICE_ID_HP_DIVA,
 624                 .subvendor      = PCI_ANY_ID,
 625                 .subdevice      = PCI_ANY_ID,
 626                 .init           = pci_hp_diva_init,
 627                 .setup          = pci_hp_diva_setup,
 628         },
 629         /*
 630          * Intel
 631          */
 632         {
 633                 .vendor         = PCI_VENDOR_ID_INTEL,
 634                 .device         = PCI_DEVICE_ID_INTEL_80960_RP,
 635                 .subvendor      = 0xe4bf,
 636                 .subdevice      = PCI_ANY_ID,
 637                 .init           = pci_inteli960ni_init,
 638                 .setup          = pci_default_setup,
 639         },
 640         /*
 641          * Panacom
 642          */
 643         {
 644                 .vendor         = PCI_VENDOR_ID_PANACOM,
 645                 .device         = PCI_DEVICE_ID_PANACOM_QUADMODEM,
 646                 .subvendor      = PCI_ANY_ID,
 647                 .subdevice      = PCI_ANY_ID,
 648                 .init           = pci_plx9050_init,
 649                 .setup          = pci_default_setup,
 650                 .exit           = __devexit_p(pci_plx9050_exit),
 651         },
 652         {
 653                 .vendor         = PCI_VENDOR_ID_PANACOM,
 654                 .device         = PCI_DEVICE_ID_PANACOM_DUALMODEM,
 655                 .subvendor      = PCI_ANY_ID,
 656                 .subdevice      = PCI_ANY_ID,
 657                 .init           = pci_plx9050_init,
 658                 .setup          = pci_default_setup,
 659                 .exit           = __devexit_p(pci_plx9050_exit),
 660         },
 661         /*
 662          * PLX
 663          */
 664         {
 665                 .vendor         = PCI_VENDOR_ID_PLX,
 666                 .device         = PCI_DEVICE_ID_PLX_9050,
 667                 .subvendor      = PCI_SUBVENDOR_ID_KEYSPAN,
 668                 .subdevice      = PCI_SUBDEVICE_ID_KEYSPAN_SX2,
 669                 .init           = pci_plx9050_init,
 670                 .setup          = pci_default_setup,
 671                 .exit           = __devexit_p(pci_plx9050_exit),
 672         },
 673         {
 674                 .vendor         = PCI_VENDOR_ID_PLX,
 675                 .device         = PCI_DEVICE_ID_PLX_ROMULUS,
 676                 .subvendor      = PCI_VENDOR_ID_PLX,
 677                 .subdevice      = PCI_DEVICE_ID_PLX_ROMULUS,
 678                 .init           = pci_plx9050_init,
 679                 .setup          = pci_default_setup,
 680                 .exit           = __devexit_p(pci_plx9050_exit),
 681         },
 682         /*
 683          * SBS Technologies, Inc., PMC-OCTALPRO 232
 684          */
 685         {
 686                 .vendor         = PCI_VENDOR_ID_SBSMODULARIO,
 687                 .device         = PCI_DEVICE_ID_OCTPRO,
 688                 .subvendor      = PCI_SUBVENDOR_ID_SBSMODULARIO,
 689                 .subdevice      = PCI_SUBDEVICE_ID_OCTPRO232,
 690                 .init           = sbs_init,
 691                 .setup          = sbs_setup,
 692                 .exit           = __devexit_p(sbs_exit),
 693         },
 694         /*
 695          * SBS Technologies, Inc., PMC-OCTALPRO 422
 696          */
 697         {
 698                 .vendor         = PCI_VENDOR_ID_SBSMODULARIO,
 699                 .device         = PCI_DEVICE_ID_OCTPRO,
 700                 .subvendor      = PCI_SUBVENDOR_ID_SBSMODULARIO,
 701                 .subdevice      = PCI_SUBDEVICE_ID_OCTPRO422,
 702                 .init           = sbs_init,
 703                 .setup          = sbs_setup,
 704                 .exit           = __devexit_p(sbs_exit),
 705         },
 706         /*
 707          * SBS Technologies, Inc., P-Octal 232
 708          */
 709         {
 710                 .vendor         = PCI_VENDOR_ID_SBSMODULARIO,
 711                 .device         = PCI_DEVICE_ID_OCTPRO,
 712                 .subvendor      = PCI_SUBVENDOR_ID_SBSMODULARIO,
 713                 .subdevice      = PCI_SUBDEVICE_ID_POCTAL232,
 714                 .init           = sbs_init,
 715                 .setup          = sbs_setup,
 716                 .exit           = __devexit_p(sbs_exit),
 717         },
 718         /*
 719          * SBS Technologies, Inc., P-Octal 422
 720          */
 721         {
 722                 .vendor         = PCI_VENDOR_ID_SBSMODULARIO,
 723                 .device         = PCI_DEVICE_ID_OCTPRO,
 724                 .subvendor      = PCI_SUBVENDOR_ID_SBSMODULARIO,
 725                 .subdevice      = PCI_SUBDEVICE_ID_POCTAL422,
 726                 .init           = sbs_init,
 727                 .setup          = sbs_setup,
 728                 .exit           = __devexit_p(sbs_exit),
 729         },
 730         /*
 731          * SIIG cards.
 732          */
 733         {
 734                 .vendor         = PCI_VENDOR_ID_SIIG,
 735                 .device         = PCI_ANY_ID,
 736                 .subvendor      = PCI_ANY_ID,
 737                 .subdevice      = PCI_ANY_ID,
 738                 .init           = pci_siig_init,
 739                 .setup          = pci_default_setup,
 740         },
 741         /*
 742          * Titan cards
 743          */
 744         {
 745                 .vendor         = PCI_VENDOR_ID_TITAN,
 746                 .device         = PCI_DEVICE_ID_TITAN_400L,
 747                 .subvendor      = PCI_ANY_ID,
 748                 .subdevice      = PCI_ANY_ID,
 749                 .setup          = titan_400l_800l_setup,
 750         },
 751         {
 752                 .vendor         = PCI_VENDOR_ID_TITAN,
 753                 .device         = PCI_DEVICE_ID_TITAN_800L,
 754                 .subvendor      = PCI_ANY_ID,
 755                 .subdevice      = PCI_ANY_ID,
 756                 .setup          = titan_400l_800l_setup,
 757         },
 758         /*
 759          * Timedia cards
 760          */
 761         {
 762                 .vendor         = PCI_VENDOR_ID_TIMEDIA,
 763                 .device         = PCI_DEVICE_ID_TIMEDIA_1889,
 764                 .subvendor      = PCI_VENDOR_ID_TIMEDIA,
 765                 .subdevice      = PCI_ANY_ID,
 766                 .init           = pci_timedia_init,
 767                 .setup          = pci_timedia_setup,
 768         },
 769         {
 770                 .vendor         = PCI_VENDOR_ID_TIMEDIA,
 771                 .device         = PCI_ANY_ID,
 772                 .subvendor      = PCI_ANY_ID,
 773                 .subdevice      = PCI_ANY_ID,
 774                 .setup          = pci_timedia_setup,
 775         },
 776         /*
 777          * Xircom cards
 778          */
 779         {
 780                 .vendor         = PCI_VENDOR_ID_XIRCOM,
 781                 .device         = PCI_DEVICE_ID_XIRCOM_X3201_MDM,
 782                 .subvendor      = PCI_ANY_ID,
 783                 .subdevice      = PCI_ANY_ID,
 784                 .init           = pci_xircom_init,
 785                 .setup          = pci_default_setup,
 786         },
 787         /*
 788          * Netmos cards
 789          */
 790         {
 791                 .vendor         = PCI_VENDOR_ID_NETMOS,
 792                 .device         = PCI_ANY_ID,
 793                 .subvendor      = PCI_ANY_ID,
 794                 .subdevice      = PCI_ANY_ID,
 795                 .init           = pci_netmos_init,
 796                 .setup          = pci_default_setup,
 797         },
 798         /*
 799          * Default "match everything" terminator entry
 800          */
 801         {
 802                 .vendor         = PCI_ANY_ID,
 803                 .device         = PCI_ANY_ID,
 804                 .subvendor      = PCI_ANY_ID,
 805                 .subdevice      = PCI_ANY_ID,
 806                 .setup          = pci_default_setup,
 807         }
 808 };
 809
 810 static inline int quirk_id_matches(u32 quirk_id, u32 dev_id)
 811 {
 812         return quirk_id == PCI_ANY_ID || quirk_id == dev_id;
 813 }
 814
 815 static struct pci_serial_quirk *find_quirk(struct pci_dev *dev)
 816 {
 817         struct pci_serial_quirk *quirk;
 818
 819         for (quirk = pci_serial_quirks; ; quirk++)
 820                 if (quirk_id_matches(quirk->vendor, dev->vendor) &&
 821                     quirk_id_matches(quirk->device, dev->device) &&
 822                     quirk_id_matches(quirk->subvendor, dev->subsystem_vendor) &&
 823                     quirk_id_matches(quirk->subdevice, dev->subsystem_device))
 824                         break;
 825         return quirk;
 826 }
 827
 828 static _INLINE_ int
 829 get_pci_irq(struct pci_dev *dev, struct pciserial_board *board)
 830 {
 831         if (board->flags & FL_NOIRQ)
 832                 return 0;
 833         else
 834                 return dev->irq;
 835 }
 836
 837 /*
 838  * This is the configuration table for all of the PCI serial boards
 839  * which we support.  It is directly indexed by the pci_board_num_t enum
 840  * value, which is encoded in the pci_device_id PCI probe table's
 841  * driver_data member.
 842  *
 843  * The makeup of these names are:
 844  *  pbn_bn{_bt}_n_baud
 845  *
 846  *  bn   = PCI BAR number
 847  *  bt   = Index using PCI BARs
 848  *  n    = number of serial ports
 849  *  baud = baud rate
 850  *
 851  * This table is sorted by (in order): baud, bt, bn, n.
 852  *
 853  * Please note: in theory if n = 1, _bt infix should make no difference.
 854  * ie, pbn_b0_1_115200 is the same as pbn_b0_bt_1_115200
 855  */
 856 enum pci_board_num_t {
 857         pbn_default = 0,
 858
 859         pbn_b0_1_115200,
 860         pbn_b0_2_115200,
 861         pbn_b0_4_115200,
 862         pbn_b0_5_115200,
 863
 864         pbn_b0_1_921600,
 865         pbn_b0_2_921600,
 866         pbn_b0_4_921600,
 867
 868         pbn_b0_2_1130000,
 869
 870         pbn_b0_4_1152000,
 871
 872         pbn_b0_bt_1_115200,
 873         pbn_b0_bt_2_115200,
 874         pbn_b0_bt_8_115200,
 875
 876         pbn_b0_bt_1_460800,
 877         pbn_b0_bt_2_460800,
 878         pbn_b0_bt_4_460800,
 879
 880         pbn_b0_bt_1_921600,
 881         pbn_b0_bt_2_921600,
 882         pbn_b0_bt_4_921600,
 883         pbn_b0_bt_8_921600,
 884
 885         pbn_b1_1_115200,
 886         pbn_b1_2_115200,
 887         pbn_b1_4_115200,
 888         pbn_b1_8_115200,
 889
 890         pbn_b1_1_921600,
 891         pbn_b1_2_921600,
 892         pbn_b1_4_921600,
 893         pbn_b1_8_921600,
 894
 895         pbn_b1_bt_2_921600,
 896
 897         pbn_b1_1_1382400,
 898         pbn_b1_2_1382400,
 899         pbn_b1_4_1382400,
 900         pbn_b1_8_1382400,
 901
 902         pbn_b2_1_115200,
 903         pbn_b2_8_115200,
 904
 905         pbn_b2_1_460800,
 906         pbn_b2_4_460800,
 907         pbn_b2_8_460800,
 908         pbn_b2_16_460800,
 909
 910         pbn_b2_1_921600,
 911         pbn_b2_4_921600,
 912         pbn_b2_8_921600,
 913
 914         pbn_b2_bt_1_115200,
 915         pbn_b2_bt_2_115200,
 916         pbn_b2_bt_4_115200,
 917
 918         pbn_b2_bt_2_921600,
 919         pbn_b2_bt_4_921600,
 920
 921         pbn_b3_4_115200,
 922         pbn_b3_8_115200,
 923
 924         /*
 925          * Board-specific versions.
 926          */
 927         pbn_panacom,
 928         pbn_panacom2,
 929         pbn_panacom4,
 930         pbn_plx_romulus,
 931         pbn_oxsemi,
 932         pbn_intel_i960,
 933         pbn_sgi_ioc3,
 934         pbn_nec_nile4,
 935         pbn_computone_4,
 936         pbn_computone_6,
 937         pbn_computone_8,
 938         pbn_sbsxrsio,
 939         pbn_exar_XR17C152,
 940         pbn_exar_XR17C154,
 941         pbn_exar_XR17C158,
 942 };
 943
 944 /*
 945  * uart_offset - the space between channels
 946  * reg_shift   - describes how the UART registers are mapped
 947  *               to PCI memory by the card.
 948  * For example IER register on SBS, Inc. PMC-OctPro is located at
 949  * offset 0x10 from the UART base, while UART_IER is defined as 1
 950  * in include/linux/serial_reg.h,
 951  * see first lines of serial_in() and serial_out() in 8250.c
 952 */
 953
 954 static struct pciserial_board pci_boards[] __devinitdata = {
 955         [pbn_default] = {
 956                 .flags          = FL_BASE0,
 957                 .num_ports      = 1,
 958                 .base_baud      = 115200,
 959                 .uart_offset    = 8,
 960         },
 961         [pbn_b0_1_115200] = {
 962                 .flags          = FL_BASE0,
 963                 .num_ports      = 1,
 964                 .base_baud      = 115200,
 965                 .uart_offset    = 8,
 966         },
 967         [pbn_b0_2_115200] = {
 968                 .flags          = FL_BASE0,
 969                 .num_ports      = 2,
 970                 .base_baud      = 115200,
 971                 .uart_offset    = 8,
 972         },
 973         [pbn_b0_4_115200] = {
 974                 .flags          = FL_BASE0,
 975                 .num_ports      = 4,
 976                 .base_baud      = 115200,
 977                 .uart_offset    = 8,
 978         },
 979         [pbn_b0_5_115200] = {
 980                 .flags          = FL_BASE0,
 981                 .num_ports      = 5,
 982                 .base_baud      = 115200,
 983                 .uart_offset    = 8,
 984         },
 985
 986         [pbn_b0_1_921600] = {
 987                 .flags          = FL_BASE0,
 988                 .num_ports      = 1,
 989                 .base_baud      = 921600,
 990                 .uart_offset    = 8,
 991         },
 992         [pbn_b0_2_921600] = {
 993                 .flags          = FL_BASE0,
 994                 .num_ports      = 2,
 995                 .base_baud      = 921600,
 996                 .uart_offset    = 8,
 997         },
 998         [pbn_b0_4_921600] = {
 999                 .flags          = FL_BASE0,
1000                 .num_ports      = 4,
1001                 .base_baud      = 921600,
1002                 .uart_offset    = 8,
1003         },
1004
1005         [pbn_b0_2_1130000] = {
1006                 .flags          = FL_BASE0,
1007                 .num_ports      = 2,
1008                 .base_baud      = 1130000,
1009                 .uart_offset    = 8,
1010         },
1011
1012         [pbn_b0_4_1152000] = {
1013                 .flags          = FL_BASE0,
1014                 .num_ports      = 4,
1015                 .base_baud      = 1152000,
1016                 .uart_offset    = 8,
1017         },
1018
1019         [pbn_b0_bt_1_115200] = {
1020                 .flags          = FL_BASE0|FL_BASE_BARS,
1021                 .num_ports      = 1,
1022                 .base_baud      = 115200,
1023                 .uart_offset    = 8,
1024         },
1025         [pbn_b0_bt_2_115200] = {
1026                 .flags          = FL_BASE0|FL_BASE_BARS,
1027                 .num_ports      = 2,
1028                 .base_baud      = 115200,
1029                 .uart_offset    = 8,
1030         },
1031         [pbn_b0_bt_8_115200] = {
1032                 .flags          = FL_BASE0|FL_BASE_BARS,
1033                 .num_ports      = 8,
1034                 .base_baud      = 115200,
1035                 .uart_offset    = 8,
1036         },
1037
1038         [pbn_b0_bt_1_460800] = {
1039                 .flags          = FL_BASE0|FL_BASE_BARS,
1040                 .num_ports      = 1,
1041                 .base_baud      = 460800,
1042                 .uart_offset    = 8,
1043         },
1044         [pbn_b0_bt_2_460800] = {
1045                 .flags          = FL_BASE0|FL_BASE_BARS,
1046                 .num_ports      = 2,
1047                 .base_baud      = 460800,
1048                 .uart_offset    = 8,
1049         },
1050         [pbn_b0_bt_4_460800] = {
1051                 .flags          = FL_BASE0|FL_BASE_BARS,
1052                 .num_ports      = 4,
1053                 .base_baud      = 460800,
1054                 .uart_offset    = 8,
1055         },
1056
1057         [pbn_b0_bt_1_921600] = {
1058                 .flags          = FL_BASE0|FL_BASE_BARS,
1059                 .num_ports      = 1,
1060                 .base_baud      = 921600,
1061                 .uart_offset    = 8,
1062         },
1063         [pbn_b0_bt_2_921600] = {
1064                 .flags          = FL_BASE0|FL_BASE_BARS,
1065                 .num_ports      = 2,
1066                 .base_baud      = 921600,
1067                 .uart_offset    = 8,
1068         },
1069         [pbn_b0_bt_4_921600] = {
1070                 .flags          = FL_BASE0|FL_BASE_BARS,
1071                 .num_ports      = 4,
1072                 .base_baud      = 921600,
1073                 .uart_offset    = 8,
1074         },
1075         [pbn_b0_bt_8_921600] = {
1076                 .flags          = FL_BASE0|FL_BASE_BARS,
1077                 .num_ports      = 8,
1078                 .base_baud      = 921600,
1079                 .uart_offset    = 8,
1080         },
1081
1082         [pbn_b1_1_115200] = {
1083                 .flags          = FL_BASE1,
1084                 .num_ports      = 1,
1085                 .base_baud      = 115200,
1086                 .uart_offset    = 8,
1087         },
1088         [pbn_b1_2_115200] = {
1089                 .flags          = FL_BASE1,
1090                 .num_ports      = 2,
1091                 .base_baud      = 115200,
1092                 .uart_offset    = 8,
1093         },
1094         [pbn_b1_4_115200] = {
1095                 .flags          = FL_BASE1,
1096                 .num_ports      = 4,
1097                 .base_baud      = 115200,
1098                 .uart_offset    = 8,
1099         },
1100         [pbn_b1_8_115200] = {
1101                 .flags          = FL_BASE1,
1102                 .num_ports      = 8,
1103                 .base_baud      = 115200,
1104                 .uart_offset    = 8,
1105         },
1106
1107         [pbn_b1_1_921600] = {
1108                 .flags          = FL_BASE1,
1109                 .num_ports      = 1,
1110                 .base_baud      = 921600,
1111                 .uart_offset    = 8,
1112         },
1113         [pbn_b1_2_921600] = {
1114                 .flags          = FL_BASE1,
1115                 .num_ports      = 2,
1116                 .base_baud      = 921600,
1117                 .uart_offset    = 8,
1118         },
1119         [pbn_b1_4_921600] = {
1120                 .flags          = FL_BASE1,
1121                 .num_ports      = 4,
1122                 .base_baud      = 921600,
1123                 .uart_offset    = 8,
1124         },
1125         [pbn_b1_8_921600] = {
1126                 .flags          = FL_BASE1,
1127                 .num_ports      = 8,
1128                 .base_baud      = 921600,
1129                 .uart_offset    = 8,
1130         },
1131
1132         [pbn_b1_bt_2_921600] = {
1133                 .flags          = FL_BASE1|FL_BASE_BARS,
1134                 .num_ports      = 2,
1135                 .base_baud      = 921600,
1136                 .uart_offset    = 8,
1137         },
1138
1139         [pbn_b1_1_1382400] = {
1140                 .flags          = FL_BASE1,
1141                 .num_ports      = 1,
1142                 .base_baud      = 1382400,
1143                 .uart_offset    = 8,
1144         },
1145         [pbn_b1_2_1382400] = {
1146                 .flags          = FL_BASE1,
1147                 .num_ports      = 2,
1148                 .base_baud      = 1382400,
1149                 .uart_offset    = 8,
1150         },
1151         [pbn_b1_4_1382400] = {
1152                 .flags          = FL_BASE1,
1153                 .num_ports      = 4,
1154                 .base_baud      = 1382400,
1155                 .uart_offset    = 8,
1156         },
1157         [pbn_b1_8_1382400] = {
1158                 .flags          = FL_BASE1,
1159                 .num_ports      = 8,
1160                 .base_baud      = 1382400,
1161                 .uart_offset    = 8,
1162         },
1163
1164         [pbn_b2_1_115200] = {
1165                 .flags          = FL_BASE2,
1166                 .num_ports      = 1,
1167                 .base_baud      = 115200,
1168                 .uart_offset    = 8,
1169         },
1170         [pbn_b2_8_115200] = {
1171                 .flags          = FL_BASE2,
1172                 .num_ports      = 8,
1173                 .base_baud      = 115200,
1174                 .uart_offset    = 8,
1175         },
1176
1177         [pbn_b2_1_460800] = {
1178                 .flags          = FL_BASE2,
1179                 .num_ports      = 1,
1180                 .base_baud      = 460800,
1181                 .uart_offset    = 8,
1182         },
1183         [pbn_b2_4_460800] = {
1184                 .flags          = FL_BASE2,
1185                 .num_ports      = 4,
1186                 .base_baud      = 460800,
1187                 .uart_offset    = 8,
1188         },
1189         [pbn_b2_8_460800] = {
1190                 .flags          = FL_BASE2,
1191                 .num_ports      = 8,
1192                 .base_baud      = 460800,
1193                 .uart_offset    = 8,
1194         },
1195         [pbn_b2_16_460800] = {
1196                 .flags          = FL_BASE2,
1197                 .num_ports      = 16,
1198                 .base_baud      = 460800,
1199                 .uart_offset    = 8,
1200          },
1201
1202         [pbn_b2_1_921600] = {
1203                 .flags          = FL_BASE2,
1204                 .num_ports      = 1,
1205                 .base_baud      = 921600,
1206                 .uart_offset    = 8,
1207         },
1208         [pbn_b2_4_921600] = {
1209                 .flags          = FL_BASE2,
1210                 .num_ports      = 4,
1211                 .base_baud      = 921600,
1212                 .uart_offset    = 8,
1213         },
1214         [pbn_b2_8_921600] = {
1215                 .flags          = FL_BASE2,
1216                 .num_ports      = 8,
1217                 .base_baud      = 921600,
1218                 .uart_offset    = 8,
1219         },
1220
1221         [pbn_b2_bt_1_115200] = {
1222                 .flags          = FL_BASE2|FL_BASE_BARS,
1223                 .num_ports      = 1,
1224                 .base_baud      = 115200,
1225                 .uart_offset    = 8,
1226         },
1227         [pbn_b2_bt_2_115200] = {
1228                 .flags          = FL_BASE2|FL_BASE_BARS,
1229                 .num_ports      = 2,
1230                 .base_baud      = 115200,
1231                 .uart_offset    = 8,
1232         },
1233         [pbn_b2_bt_4_115200] = {
1234                 .flags          = FL_BASE2|FL_BASE_BARS,
1235                 .num_ports      = 4,
1236                 .base_baud      = 115200,
1237                 .uart_offset    = 8,
1238         },
1239
1240         [pbn_b2_bt_2_921600] = {
1241                 .flags          = FL_BASE2|FL_BASE_BARS,
1242                 .num_ports      = 2,
1243                 .base_baud      = 921600,
1244                 .uart_offset    = 8,
1245         },
1246         [pbn_b2_bt_4_921600] = {
1247                 .flags          = FL_BASE2|FL_BASE_BARS,
1248                 .num_ports      = 4,
1249                 .base_baud      = 921600,
1250                 .uart_offset    = 8,
1251         },
1252
1253         [pbn_b3_4_115200] = {
1254                 .flags          = FL_BASE3,
1255                 .num_ports      = 4,
1256                 .base_baud      = 115200,
1257                 .uart_offset    = 8,
1258         },
1259         [pbn_b3_8_115200] = {
1260                 .flags          = FL_BASE3,
1261                 .num_ports      = 8,
1262                 .base_baud      = 115200,
1263                 .uart_offset    = 8,
1264         },
1265
1266         /*
1267          * Entries following this are board-specific.
1268          */
1269
1270         /*
1271          * Panacom - IOMEM
1272          */
1273         [pbn_panacom] = {
1274                 .flags          = FL_BASE2,
1275                 .num_ports      = 2,
1276                 .base_baud      = 921600,
1277                 .uart_offset    = 0x400,
1278                 .reg_shift      = 7,
1279         },
1280         [pbn_panacom2] = {
1281                 .flags          = FL_BASE2|FL_BASE_BARS,
1282                 .num_ports      = 2,
1283                 .base_baud      = 921600,
1284                 .uart_offset    = 0x400,
1285                 .reg_shift      = 7,
1286         },
1287         [pbn_panacom4] = {
1288                 .flags          = FL_BASE2|FL_BASE_BARS,
1289                 .num_ports      = 4,
1290                 .base_baud      = 921600,
1291                 .uart_offset    = 0x400,
1292                 .reg_shift      = 7,
1293         },
1294
1295         /* I think this entry is broken - the first_offset looks wrong --rmk */
1296         [pbn_plx_romulus] = {
1297                 .flags          = FL_BASE2,
1298                 .num_ports      = 4,
1299                 .base_baud      = 921600,
1300                 .uart_offset    = 8 << 2,
1301                 .reg_shift      = 2,
1302                 .first_offset   = 0x03,
1303         },
1304
1305         /*
1306          * This board uses the size of PCI Base region 0 to
1307          * signal now many ports are available
1308          */
1309         [pbn_oxsemi] = {
1310                 .flags          = FL_BASE0|FL_REGION_SZ_CAP,
1311                 .num_ports      = 32,
1312                 .base_baud      = 115200,
1313                 .uart_offset    = 8,
1314         },
1315
1316         /*
1317          * EKF addition for i960 Boards form EKF with serial port.
1318          * Max 256 ports.
1319          */
1320         [pbn_intel_i960] = {
1321                 .flags          = FL_BASE0,
1322                 .num_ports      = 32,
1323                 .base_baud      = 921600,
1324                 .uart_offset    = 8 << 2,
1325                 .reg_shift      = 2,
1326                 .first_offset   = 0x10000,
1327         },
1328         [pbn_sgi_ioc3] = {
1329                 .flags          = FL_BASE0|FL_NOIRQ,
1330                 .num_ports      = 1,
1331                 .base_baud      = 458333,
1332                 .uart_offset    = 8,
1333                 .reg_shift      = 0,
1334                 .first_offset   = 0x20178,
1335         },
1336
1337         /*
1338          * NEC Vrc-5074 (Nile 4) builtin UART.
1339          */
1340         [pbn_nec_nile4] = {
1341                 .flags          = FL_BASE0,
1342                 .num_ports      = 1,
1343                 .base_baud      = 520833,
1344                 .uart_offset    = 8 << 3,
1345                 .reg_shift      = 3,
1346                 .first_offset   = 0x300,
1347         },
1348
1349         /*
1350          * Computone - uses IOMEM.
1351          */
1352         [pbn_computone_4] = {
1353                 .flags          = FL_BASE0,
1354                 .num_ports      = 4,
1355                 .base_baud      = 921600,
1356                 .uart_offset    = 0x40,
1357                 .reg_shift      = 2,
1358                 .first_offset   = 0x200,
1359         },
1360         [pbn_computone_6] = {
1361                 .flags          = FL_BASE0,
1362                 .num_ports      = 6,
1363                 .base_baud      = 921600,
1364                 .uart_offset    = 0x40,
1365                 .reg_shift      = 2,
1366                 .first_offset   = 0x200,
1367         },
1368         [pbn_computone_8] = {
1369                 .flags          = FL_BASE0,
1370                 .num_ports      = 8,
1371                 .base_baud      = 921600,
1372                 .uart_offset    = 0x40,
1373                 .reg_shift      = 2,
1374                 .first_offset   = 0x200,
1375         },
1376         [pbn_sbsxrsio] = {
1377                 .flags          = FL_BASE0,
1378                 .num_ports      = 8,
1379                 .base_baud      = 460800,
1380                 .uart_offset    = 256,
1381                 .reg_shift      = 4,
1382         },
1383         /*
1384          * Exar Corp. XR17C15[248] Dual/Quad/Octal UART
1385          *  Only basic 16550A support.
1386          *  XR17C15[24] are not tested, but they should work.
1387          */
1388         [pbn_exar_XR17C152] = {
1389                 .flags          = FL_BASE0,
1390                 .num_ports      = 2,
1391                 .base_baud      = 921600,
1392                 .uart_offset    = 0x200,
1393         },
1394         [pbn_exar_XR17C154] = {
1395                 .flags          = FL_BASE0,
1396                 .num_ports      = 4,
1397                 .base_baud      = 921600,
1398                 .uart_offset    = 0x200,
1399         },
1400         [pbn_exar_XR17C158] = {
1401                 .flags          = FL_BASE0,
1402                 .num_ports      = 8,
1403                 .base_baud      = 921600,
1404                 .uart_offset    = 0x200,
1405         },
1406 };
1407
1408 /*
1409  * Given a complete unknown PCI device, try to use some heuristics to
1410  * guess what the configuration might be, based on the pitiful PCI
1411  * serial specs.  Returns 0 on success, 1 on failure.
1412  */
1413 static int __devinit
1414 serial_pci_guess_board(struct pci_dev *dev, struct pciserial_board *board)
1415 {
1416         int num_iomem, num_port, first_port = -1, i;
1417
1418         /*
1419          * If it is not a communications device or the programming
1420          * interface is greater than 6, give up.
1421          *
1422          * (Should we try to make guesses for multiport serial devices
1423          * later?)
1424          */
1425         if ((((dev->class >> 8) != PCI_CLASS_COMMUNICATION_SERIAL) &&
1426              ((dev->class >> 8) != PCI_CLASS_COMMUNICATION_MODEM)) ||
1427             (dev->class & 0xff) > 6)
1428                 return -ENODEV;
1429
1430         num_iomem = num_port = 0;
1431         for (i = 0; i < PCI_NUM_BAR_RESOURCES; i++) {
1432                 if (pci_resource_flags(dev, i) & IORESOURCE_IO) {
1433                         num_port++;
1434                         if (first_port == -1)
1435                                 first_port = i;
1436                 }
1437                 if (pci_resource_flags(dev, i) & IORESOURCE_MEM)
1438                         num_iomem++;
1439         }
1440
1441         /*
1442          * If there is 1 or 0 iomem regions, and exactly one port,
1443          * use it.  We guess the number of ports based on the IO
1444          * region size.
1445          */
1446         if (num_iomem <= 1 && num_port == 1) {
1447                 board->flags = first_port;
1448                 board->num_ports = pci_resource_len(dev, first_port) / 8;
1449                 return 0;
1450         }
1451
1452         /*
1453          * Now guess if we've got a board which indexes by BARs.
1454          * Each IO BAR should be 8 bytes, and they should follow
1455          * consecutively.
1456          */
1457         first_port = -1;
1458         num_port = 0;
1459         for (i = 0; i < PCI_NUM_BAR_RESOURCES; i++) {
1460                 if (pci_resource_flags(dev, i) & IORESOURCE_IO &&
1461                     pci_resource_len(dev, i) == 8 &&
1462                     (first_port == -1 || (first_port + num_port) == i)) {
1463                         num_port++;
1464                         if (first_port == -1)
1465                                 first_port = i;
1466                 }
1467         }
1468
1469         if (num_port > 1) {
1470                 board->flags = first_port | FL_BASE_BARS;
1471                 board->num_ports = num_port;
1472                 return 0;
1473         }
1474
1475         return -ENODEV;
1476 }
1477
1478 static inline int
1479 serial_pci_matches(struct pciserial_board *board,
1480                    struct pciserial_board *guessed)
1481 {
1482         return
1483             board->num_ports == guessed->num_ports &&
1484             board->base_baud == guessed->base_baud &&
1485             board->uart_offset == guessed->uart_offset &&
1486             board->reg_shift == guessed->reg_shift &&
1487             board->first_offset == guessed->first_offset;
1488 }
1489
1490 struct serial_private *
1491 pciserial_init_ports(struct pci_dev *dev, struct pciserial_board *board)
1492 {
1493         struct uart_port serial_port;
1494         struct serial_private *priv;
1495         struct pci_serial_quirk *quirk;
1496         int rc, nr_ports, i;
1497
1498         nr_ports = board->num_ports;
1499
1500         /*
1501          * Find an init and setup quirks.
1502          */
1503         quirk = find_quirk(dev);
1504
1505         /*
1506          * Run the new-style initialization function.
1507          * The initialization function returns:
1508          *  <0  - error
1509          *   0  - use board->num_ports
1510          *  >0  - number of ports
1511          */
1512         if (quirk->init) {
1513                 rc = quirk->init(dev);
1514                 if (rc < 0) {
1515                         priv = ERR_PTR(rc);
1516                         goto err_out;
1517                 }
1518                 if (rc)
1519                         nr_ports = rc;
1520         }
1521
1522         priv = kmalloc(sizeof(struct serial_private) +
1523                        sizeof(unsigned int) * nr_ports,
1524                        GFP_KERNEL);
1525         if (!priv) {
1526                 priv = ERR_PTR(-ENOMEM);
1527                 goto err_deinit;
1528         }
1529
1530         memset(priv, 0, sizeof(struct serial_private) +
1531                         sizeof(unsigned int) * nr_ports);
1532
1533         priv->dev = dev;
1534         priv->quirk = quirk;
1535
1536         memset(&serial_port, 0, sizeof(struct uart_port));
1537         serial_port.flags = UPF_SKIP_TEST | UPF_BOOT_AUTOCONF | UPF_SHARE_IRQ;
1538         serial_port.uartclk = board->base_baud * 16;
1539         serial_port.irq = get_pci_irq(dev, board);
1540         serial_port.dev = &dev->dev;
1541
1542         for (i = 0; i < nr_ports; i++) {
1543                 if (quirk->setup(priv, board, &serial_port, i))
1544                         break;
1545
1546 #ifdef SERIAL_DEBUG_PCI
1547                 printk("Setup PCI port: port %x, irq %d, type %d\n",
1548                        serial_port.iobase, serial_port.irq, serial_port.iotype);
1549 #endif
1550
1551                 priv->line[i] = serial8250_register_port(&serial_port);
1552                 if (priv->line[i] < 0) {
1553                         printk(KERN_WARNING "Couldn't register serial port %s: %d\n", pci_name(dev), priv->line[i]);
1554                         break;
1555                 }
1556         }
1557
1558         priv->nr = i;
1559
1560         return priv;
1561
1562  err_deinit:
1563         if (quirk->exit)
1564                 quirk->exit(dev);
1565  err_out:
1566         return priv;
1567 }
1568 EXPORT_SYMBOL_GPL(pciserial_init_ports);
1569
1570 void pciserial_remove_ports(struct serial_private *priv)
1571 {
1572         struct pci_serial_quirk *quirk;
1573         int i;
1574
1575         for (i = 0; i < priv->nr; i++)
1576                 serial8250_unregister_port(priv->line[i]);
1577
1578         for (i = 0; i < PCI_NUM_BAR_RESOURCES; i++) {
1579                 if (priv->remapped_bar[i])
1580                         iounmap(priv->remapped_bar[i]);
1581                 priv->remapped_bar[i] = NULL;
1582         }
1583
1584         /*
1585          * Find the exit quirks.
1586          */
1587         quirk = find_quirk(priv->dev);
1588         if (quirk->exit)
1589                 quirk->exit(priv->dev);
1590
1591         kfree(priv);
1592 }
1593 EXPORT_SYMBOL_GPL(pciserial_remove_ports);
1594
1595 void pciserial_suspend_ports(struct serial_private *priv)
1596 {
1597         int i;
1598
1599         for (i = 0; i < priv->nr; i++)
1600                 if (priv->line[i] >= 0)
1601                         serial8250_suspend_port(priv->line[i]);
1602 }
1603 EXPORT_SYMBOL_GPL(pciserial_suspend_ports);
1604
1605 void pciserial_resume_ports(struct serial_private *priv)
1606 {
1607         int i;
1608
1609         /*
1610          * Ensure that the board is correctly configured.
1611          */
1612         if (priv->quirk->init)
1613                 priv->quirk->init(priv->dev);
1614
1615         for (i = 0; i < priv->nr; i++)
1616                 if (priv->line[i] >= 0)
1617                         serial8250_resume_port(priv->line[i]);
1618 }
1619 EXPORT_SYMBOL_GPL(pciserial_resume_ports);
1620
1621 /*
1622  * Probe one serial board.  Unfortunately, there is no rhyme nor reason
1623  * to the arrangement of serial ports on a PCI card.
1624  */
1625 static int __devinit
1626 pciserial_init_one(struct pci_dev *dev, const struct pci_device_id *ent)
1627 {
1628         struct serial_private *priv;
1629         struct pciserial_board *board, tmp;
1630         int rc;
1631
1632         if (ent->driver_data >= ARRAY_SIZE(pci_boards)) {
1633                 printk(KERN_ERR "pci_init_one: invalid driver_data: %ld\n",
1634                         ent->driver_data);
1635                 return -EINVAL;
1636         }
1637
1638         board = &pci_boards[ent->driver_data];
1639
1640         rc = pci_enable_device(dev);
1641         if (rc)
1642                 return rc;
1643
1644         if (ent->driver_data == pbn_default) {
1645                 /*
1646                  * Use a copy of the pci_board entry for this;
1647                  * avoid changing entries in the table.
1648                  */
1649                 memcpy(&tmp, board, sizeof(struct pciserial_board));
1650                 board = &tmp;
1651
1652                 /*
1653                  * We matched one of our class entries.  Try to
1654                  * determine the parameters of this board.
1655                  */
1656                 rc = serial_pci_guess_board(dev, board);
1657                 if (rc)
1658                         goto disable;
1659         } else {
1660                 /*
1661                  * We matched an explicit entry.  If we are able to
1662                  * detect this boards settings with our heuristic,
1663                  * then we no longer need this entry.
1664                  */
1665                 memcpy(&tmp, &pci_boards[pbn_default],
1666                        sizeof(struct pciserial_board));
1667                 rc = serial_pci_guess_board(dev, &tmp);
1668                 if (rc == 0 && serial_pci_matches(board, &tmp))
1669                         moan_device("Redundant entry in serial pci_table.",
1670                                     dev);
1671         }
1672
1673         priv = pciserial_init_ports(dev, board);
1674         if (!IS_ERR(priv)) {
1675                 pci_set_drvdata(dev, priv);
1676                 return 0;
1677         }
1678
1679         rc = PTR_ERR(priv);
1680
1681  disable:
1682         pci_disable_device(dev);
1683         return rc;
1684 }
1685
1686 static void __devexit pciserial_remove_one(struct pci_dev *dev)
1687 {
1688         struct serial_private *priv = pci_get_drvdata(dev);
1689
1690         pci_set_drvdata(dev, NULL);
1691
1692         pciserial_remove_ports(priv);
1693
1694         pci_disable_device(dev);
1695 }
1696
1697 static int pciserial_suspend_one(struct pci_dev *dev, pm_message_t state)
1698 {
1699         struct serial_private *priv = pci_get_drvdata(dev);
1700
1701         if (priv)
1702                 pciserial_suspend_ports(priv);
1703
1704         pci_save_state(dev);
1705         pci_set_power_state(dev, pci_choose_state(dev, state));
1706         return 0;
1707 }
1708
1709 static int pciserial_resume_one(struct pci_dev *dev)
1710 {
1711         struct serial_private *priv = pci_get_drvdata(dev);
1712
1713         pci_set_power_state(dev, PCI_D0);
1714         pci_restore_state(dev);
1715
1716         if (priv) {
1717                 /*
1718                  * The device may have been disabled.  Re-enable it.
1719                  */
1720                 pci_enable_device(dev);
1721
1722                 pciserial_resume_ports(priv);
1723         }
1724         return 0;
1725 }
1726
1727 static struct pci_device_id serial_pci_tbl[] = {
1728         {       PCI_VENDOR_ID_V3, PCI_DEVICE_ID_V3_V960,
1729                 PCI_SUBVENDOR_ID_CONNECT_TECH,
1730                 PCI_SUBDEVICE_ID_CONNECT_TECH_BH8_232, 0, 0,
1731                 pbn_b1_8_1382400 },
1732         {       PCI_VENDOR_ID_V3, PCI_DEVICE_ID_V3_V960,
1733                 PCI_SUBVENDOR_ID_CONNECT_TECH,
1734                 PCI_SUBDEVICE_ID_CONNECT_TECH_BH4_232, 0, 0,
1735                 pbn_b1_4_1382400 },
1736         {       PCI_VENDOR_ID_V3, PCI_DEVICE_ID_V3_V960,
1737                 PCI_SUBVENDOR_ID_CONNECT_TECH,
1738                 PCI_SUBDEVICE_ID_CONNECT_TECH_BH2_232, 0, 0,
1739                 pbn_b1_2_1382400 },
1740         {       PCI_VENDOR_ID_V3, PCI_DEVICE_ID_V3_V351,
1741                 PCI_SUBVENDOR_ID_CONNECT_TECH,
1742                 PCI_SUBDEVICE_ID_CONNECT_TECH_BH8_232, 0, 0,
1743                 pbn_b1_8_1382400 },
1744         {       PCI_VENDOR_ID_V3, PCI_DEVICE_ID_V3_V351,
1745                 PCI_SUBVENDOR_ID_CONNECT_TECH,
1746                 PCI_SUBDEVICE_ID_CONNECT_TECH_BH4_232, 0, 0,
1747                 pbn_b1_4_1382400 },
1748         {       PCI_VENDOR_ID_V3, PCI_DEVICE_ID_V3_V351,
1749                 PCI_SUBVENDOR_ID_CONNECT_TECH,
1750                 PCI_SUBDEVICE_ID_CONNECT_TECH_BH2_232, 0, 0,
1751                 pbn_b1_2_1382400 },
1752         {       PCI_VENDOR_ID_V3, PCI_DEVICE_ID_V3_V351,
1753                 PCI_SUBVENDOR_ID_CONNECT_TECH,
1754                 PCI_SUBDEVICE_ID_CONNECT_TECH_BH8_485, 0, 0,
1755                 pbn_b1_8_921600 },
1756         {       PCI_VENDOR_ID_V3, PCI_DEVICE_ID_V3_V351,
1757                 PCI_SUBVENDOR_ID_CONNECT_TECH,
1758                 PCI_SUBDEVICE_ID_CONNECT_TECH_BH8_485_4_4, 0, 0,
1759                 pbn_b1_8_921600 },
1760         {       PCI_VENDOR_ID_V3, PCI_DEVICE_ID_V3_V351,
1761                 PCI_SUBVENDOR_ID_CONNECT_TECH,
1762                 PCI_SUBDEVICE_ID_CONNECT_TECH_BH4_485, 0, 0,
1763                 pbn_b1_4_921600 },
1764         {       PCI_VENDOR_ID_V3, PCI_DEVICE_ID_V3_V351,
1765                 PCI_SUBVENDOR_ID_CONNECT_TECH,
1766                 PCI_SUBDEVICE_ID_CONNECT_TECH_BH4_485_2_2, 0, 0,
1767                 pbn_b1_4_921600 },
1768         {       PCI_VENDOR_ID_V3, PCI_DEVICE_ID_V3_V351,
1769                 PCI_SUBVENDOR_ID_CONNECT_TECH,
1770                 PCI_SUBDEVICE_ID_CONNECT_TECH_BH2_485, 0, 0,
1771                 pbn_b1_2_921600 },
1772         {       PCI_VENDOR_ID_V3, PCI_DEVICE_ID_V3_V351,
1773                 PCI_SUBVENDOR_ID_CONNECT_TECH,
1774                 PCI_SUBDEVICE_ID_CONNECT_TECH_BH8_485_2_6, 0, 0,
1775                 pbn_b1_8_921600 },
1776         {       PCI_VENDOR_ID_V3, PCI_DEVICE_ID_V3_V351,
1777                 PCI_SUBVENDOR_ID_CONNECT_TECH,
1778                 PCI_SUBDEVICE_ID_CONNECT_TECH_BH081101V1, 0, 0,
1779                 pbn_b1_8_921600 },
1780         {       PCI_VENDOR_ID_V3, PCI_DEVICE_ID_V3_V351,
1781                 PCI_SUBVENDOR_ID_CONNECT_TECH,
1782                 PCI_SUBDEVICE_ID_CONNECT_TECH_BH041101V1, 0, 0,
1783                 pbn_b1_4_921600 },
1784
1785         {       PCI_VENDOR_ID_SEALEVEL, PCI_DEVICE_ID_SEALEVEL_U530,
1786                 PCI_ANY_ID, PCI_ANY_ID, 0, 0,
1787                 pbn_b2_bt_1_115200 },
1788         {       PCI_VENDOR_ID_SEALEVEL, PCI_DEVICE_ID_SEALEVEL_UCOMM2,
1789                 PCI_ANY_ID, PCI_ANY_ID, 0, 0,
1790                 pbn_b2_bt_2_115200 },
1791         {       PCI_VENDOR_ID_SEALEVEL, PCI_DEVICE_ID_SEALEVEL_UCOMM422,
1792                 PCI_ANY_ID, PCI_ANY_ID, 0, 0,
1793                 pbn_b2_bt_4_115200 },
1794         {       PCI_VENDOR_ID_SEALEVEL, PCI_DEVICE_ID_SEALEVEL_UCOMM232,
1795                 PCI_ANY_ID, PCI_ANY_ID, 0, 0,
1796                 pbn_b2_bt_2_115200 },
1797         {       PCI_VENDOR_ID_SEALEVEL, PCI_DEVICE_ID_SEALEVEL_COMM4,
1798                 PCI_ANY_ID, PCI_ANY_ID, 0, 0,
1799                 pbn_b2_bt_4_115200 },
1800         {       PCI_VENDOR_ID_SEALEVEL, PCI_DEVICE_ID_SEALEVEL_COMM8,
1801                 PCI_ANY_ID, PCI_ANY_ID, 0, 0,
1802                 pbn_b2_8_115200 },
1803         {       PCI_VENDOR_ID_SEALEVEL, PCI_DEVICE_ID_SEALEVEL_UCOMM8,
1804                 PCI_ANY_ID, PCI_ANY_ID, 0, 0,
1805                 pbn_b2_8_115200 },
1806
1807         {       PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_GTEK_SERIAL2,
1808                 PCI_ANY_ID, PCI_ANY_ID, 0, 0,
1809                 pbn_b2_bt_2_115200 },
1810         {       PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_SPCOM200,
1811                 PCI_ANY_ID, PCI_ANY_ID, 0, 0,
1812                 pbn_b2_bt_2_921600 },
1813         /*
1814          * VScom SPCOM800, from sl@s.pl
1815          */
1816         {       PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_SPCOM800,
1817                 PCI_ANY_ID, PCI_ANY_ID, 0, 0,
1818                 pbn_b2_8_921600 },
1819         {       PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_1077,
1820                 PCI_ANY_ID, PCI_ANY_ID, 0, 0,
1821                 pbn_b2_4_921600 },
1822         {       PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_9050,
1823                 PCI_SUBVENDOR_ID_KEYSPAN,
1824                 PCI_SUBDEVICE_ID_KEYSPAN_SX2, 0, 0,
1825                 pbn_panacom },
1826         {       PCI_VENDOR_ID_PANACOM, PCI_DEVICE_ID_PANACOM_QUADMODEM,
1827                 PCI_ANY_ID, PCI_ANY_ID, 0, 0,
1828                 pbn_panacom4 },
1829         {       PCI_VENDOR_ID_PANACOM, PCI_DEVICE_ID_PANACOM_DUALMODEM,
1830                 PCI_ANY_ID, PCI_ANY_ID, 0, 0,
1831                 pbn_panacom2 },
1832         {       PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_9050,
1833                 PCI_SUBVENDOR_ID_CHASE_PCIFAST,
1834                 PCI_SUBDEVICE_ID_CHASE_PCIFAST4, 0, 0,
1835                 pbn_b2_4_460800 },
1836         {       PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_9050,
1837                 PCI_SUBVENDOR_ID_CHASE_PCIFAST,
1838                 PCI_SUBDEVICE_ID_CHASE_PCIFAST8, 0, 0,
1839                 pbn_b2_8_460800 },
1840         {       PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_9050,
1841                 PCI_SUBVENDOR_ID_CHASE_PCIFAST,
1842                 PCI_SUBDEVICE_ID_CHASE_PCIFAST16, 0, 0,
1843                 pbn_b2_16_460800 },
1844         {       PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_9050,
1845                 PCI_SUBVENDOR_ID_CHASE_PCIFAST,
1846                 PCI_SUBDEVICE_ID_CHASE_PCIFAST16FMC, 0, 0,
1847                 pbn_b2_16_460800 },
1848         {       PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_9050,
1849                 PCI_SUBVENDOR_ID_CHASE_PCIRAS,
1850                 PCI_SUBDEVICE_ID_CHASE_PCIRAS4, 0, 0,
1851                 pbn_b2_4_460800 },
1852         {       PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_9050,
1853                 PCI_SUBVENDOR_ID_CHASE_PCIRAS,
1854                 PCI_SUBDEVICE_ID_CHASE_PCIRAS8, 0, 0,
1855                 pbn_b2_8_460800 },
1856         /*
1857          * Megawolf Romulus PCI Serial Card, from Mike Hudson
1858          * (Exoray@isys.ca)
1859          */
1860         {       PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_ROMULUS,
1861                 0x10b5, 0x106a, 0, 0,
1862                 pbn_plx_romulus },
1863         {       PCI_VENDOR_ID_QUATECH, PCI_DEVICE_ID_QUATECH_QSC100,
1864                 PCI_ANY_ID, PCI_ANY_ID, 0, 0,
1865                 pbn_b1_4_115200 },
1866         {       PCI_VENDOR_ID_QUATECH, PCI_DEVICE_ID_QUATECH_DSC100,
1867                 PCI_ANY_ID, PCI_ANY_ID, 0, 0,
1868                 pbn_b1_2_115200 },
1869         {       PCI_VENDOR_ID_QUATECH, PCI_DEVICE_ID_QUATECH_ESC100D,
1870                 PCI_ANY_ID, PCI_ANY_ID, 0, 0,
1871                 pbn_b1_8_115200 },
1872         {       PCI_VENDOR_ID_QUATECH, PCI_DEVICE_ID_QUATECH_ESC100M,
1873                 PCI_ANY_ID, PCI_ANY_ID, 0, 0,
1874                 pbn_b1_8_115200 },
1875         {       PCI_VENDOR_ID_SPECIALIX, PCI_DEVICE_ID_OXSEMI_16PCI954,
1876                 PCI_VENDOR_ID_SPECIALIX, PCI_SUBDEVICE_ID_SPECIALIX_SPEED4, 0, 0,
1877                 pbn_b0_4_921600 },
1878         {       PCI_VENDOR_ID_OXSEMI, PCI_DEVICE_ID_OXSEMI_16PCI954,
1879                 PCI_SUBVENDOR_ID_SIIG, PCI_SUBDEVICE_ID_SIIG_QUARTET_SERIAL, 0, 0,
1880                 pbn_b0_4_1152000 },
1881
1882                 /*
1883                  * The below card is a little controversial since it is the
1884                  * subject of a PCI vendor/device ID clash.  (See
1885                  * www.ussg.iu.edu/hypermail/linux/kernel/0303.1/0516.html).
1886                  * For now just used the hex ID 0x950a.
1887                  */
1888         {       PCI_VENDOR_ID_OXSEMI, 0x950a,
1889                 PCI_ANY_ID, PCI_ANY_ID, 0, 0,
1890                 pbn_b0_2_1130000 },
1891         {       PCI_VENDOR_ID_OXSEMI, PCI_DEVICE_ID_OXSEMI_16PCI954,
1892                 PCI_ANY_ID, PCI_ANY_ID, 0, 0,
1893                 pbn_b0_4_115200 },
1894         {       PCI_VENDOR_ID_OXSEMI, PCI_DEVICE_ID_OXSEMI_16PCI952,
1895                 PCI_ANY_ID, PCI_ANY_ID, 0, 0,
1896                 pbn_b0_bt_2_921600 },
1897
1898         /*
1899          * SBS Technologies, Inc. P-Octal and PMC-OCTPRO cards,
1900          * from skokodyn@yahoo.com
1901          */
1902         {       PCI_VENDOR_ID_SBSMODULARIO, PCI_DEVICE_ID_OCTPRO,
1903                 PCI_SUBVENDOR_ID_SBSMODULARIO, PCI_SUBDEVICE_ID_OCTPRO232, 0, 0,
1904                 pbn_sbsxrsio },
1905         {       PCI_VENDOR_ID_SBSMODULARIO, PCI_DEVICE_ID_OCTPRO,
1906                 PCI_SUBVENDOR_ID_SBSMODULARIO, PCI_SUBDEVICE_ID_OCTPRO422, 0, 0,
1907                 pbn_sbsxrsio },
1908         {       PCI_VENDOR_ID_SBSMODULARIO, PCI_DEVICE_ID_OCTPRO,
1909                 PCI_SUBVENDOR_ID_SBSMODULARIO, PCI_SUBDEVICE_ID_POCTAL232, 0, 0,
1910                 pbn_sbsxrsio },
1911         {       PCI_VENDOR_ID_SBSMODULARIO, PCI_DEVICE_ID_OCTPRO,
1912                 PCI_SUBVENDOR_ID_SBSMODULARIO, PCI_SUBDEVICE_ID_POCTAL422, 0, 0,
1913                 pbn_sbsxrsio },
1914
1915         /*
1916          * Digitan DS560-558, from jimd@esoft.com
1917          */
1918         {       PCI_VENDOR_ID_ATT, PCI_DEVICE_ID_ATT_VENUS_MODEM,
1919                 PCI_ANY_ID, PCI_ANY_ID, 0, 0,
1920                 pbn_b1_1_115200 },
1921
1922         /*
1923          * Titan Electronic cards
1924          *  The 400L and 800L have a custom setup quirk.
1925          */
1926         {       PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_100,
1927                 PCI_ANY_ID, PCI_ANY_ID, 0, 0,
1928                 pbn_b0_1_921600 },
1929         {       PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_200,
1930                 PCI_ANY_ID, PCI_ANY_ID, 0, 0,
1931                 pbn_b0_2_921600 },
1932         {       PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_400,
1933                 PCI_ANY_ID, PCI_ANY_ID, 0, 0,
1934                 pbn_b0_4_921600 },
1935         {       PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_800B,
1936                 PCI_ANY_ID, PCI_ANY_ID, 0, 0,
1937                 pbn_b0_4_921600 },
1938         {       PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_100L,
1939                 PCI_ANY_ID, PCI_ANY_ID, 0, 0,
1940                 pbn_b1_1_921600 },
1941         {       PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_200L,
1942                 PCI_ANY_ID, PCI_ANY_ID, 0, 0,
1943                 pbn_b1_bt_2_921600 },
1944         {       PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_400L,
1945                 PCI_ANY_ID, PCI_ANY_ID, 0, 0,
1946                 pbn_b0_bt_4_921600 },
1947         {       PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_800L,
1948                 PCI_ANY_ID, PCI_ANY_ID, 0, 0,
1949                 pbn_b0_bt_8_921600 },
1950
1951         {       PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_1S_10x_550,
1952                 PCI_ANY_ID, PCI_ANY_ID, 0, 0,
1953                 pbn_b2_1_460800 },
1954         {       PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_1S_10x_650,
1955                 PCI_ANY_ID, PCI_ANY_ID, 0, 0,
1956                 pbn_b2_1_460800 },
1957         {       PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_1S_10x_850,
1958                 PCI_ANY_ID, PCI_ANY_ID, 0, 0,
1959                 pbn_b2_1_460800 },
1960         {       PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_2S_10x_550,
1961                 PCI_ANY_ID, PCI_ANY_ID, 0, 0,
1962                 pbn_b2_bt_2_921600 },
1963         {       PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_2S_10x_650,
1964                 PCI_ANY_ID, PCI_ANY_ID, 0, 0,
1965                 pbn_b2_bt_2_921600 },
1966         {       PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_2S_10x_850,
1967                 PCI_ANY_ID, PCI_ANY_ID, 0, 0,
1968                 pbn_b2_bt_2_921600 },
1969         {       PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_4S_10x_550,
1970                 PCI_ANY_ID, PCI_ANY_ID, 0, 0,
1971                 pbn_b2_bt_4_921600 },
1972         {       PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_4S_10x_650,
1973                 PCI_ANY_ID, PCI_ANY_ID, 0, 0,
1974                 pbn_b2_bt_4_921600 },
1975         {       PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_4S_10x_850,
1976                 PCI_ANY_ID, PCI_ANY_ID, 0, 0,
1977                 pbn_b2_bt_4_921600 },
1978         {       PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_1S_20x_550,
1979                 PCI_ANY_ID, PCI_ANY_ID, 0, 0,
1980                 pbn_b0_1_921600 },
1981         {       PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_1S_20x_650,
1982                 PCI_ANY_ID, PCI_ANY_ID, 0, 0,
1983                 pbn_b0_1_921600 },
1984         {       PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_1S_20x_850,
1985                 PCI_ANY_ID, PCI_ANY_ID, 0, 0,
1986                 pbn_b0_1_921600 },
1987         {       PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_2S_20x_550,
1988                 PCI_ANY_ID, PCI_ANY_ID, 0, 0,
1989                 pbn_b0_bt_2_921600 },
1990         {       PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_2S_20x_650,
1991                 PCI_ANY_ID, PCI_ANY_ID, 0, 0,
1992                 pbn_b0_bt_2_921600 },
1993         {       PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_2S_20x_850,
1994                 PCI_ANY_ID, PCI_ANY_ID, 0, 0,
1995                 pbn_b0_bt_2_921600 },
1996         {       PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_4S_20x_550,
1997                 PCI_ANY_ID, PCI_ANY_ID, 0, 0,
1998                 pbn_b0_bt_4_921600 },
1999         {       PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_4S_20x_650,
2000                 PCI_ANY_ID, PCI_ANY_ID, 0, 0,
2001                 pbn_b0_bt_4_921600 },
2002         {       PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_4S_20x_850,
2003                 PCI_ANY_ID, PCI_ANY_ID, 0, 0,
2004                 pbn_b0_bt_4_921600 },
2005
2006         /*
2007          * Computone devices submitted by Doug McNash dmcnash@computone.com
2008          */
2009         {       PCI_VENDOR_ID_COMPUTONE, PCI_DEVICE_ID_COMPUTONE_PG,
2010                 PCI_SUBVENDOR_ID_COMPUTONE, PCI_SUBDEVICE_ID_COMPUTONE_PG4,
2011                 0, 0, pbn_computone_4 },
2012         {       PCI_VENDOR_ID_COMPUTONE, PCI_DEVICE_ID_COMPUTONE_PG,
2013                 PCI_SUBVENDOR_ID_COMPUTONE, PCI_SUBDEVICE_ID_COMPUTONE_PG8,
2014                 0, 0, pbn_computone_8 },
2015         {       PCI_VENDOR_ID_COMPUTONE, PCI_DEVICE_ID_COMPUTONE_PG,
2016                 PCI_SUBVENDOR_ID_COMPUTONE, PCI_SUBDEVICE_ID_COMPUTONE_PG6,
2017                 0, 0, pbn_computone_6 },
2018
2019         {       PCI_VENDOR_ID_OXSEMI, PCI_DEVICE_ID_OXSEMI_16PCI95N,
2020                 PCI_ANY_ID, PCI_ANY_ID, 0, 0,
2021                 pbn_oxsemi },
2022         {       PCI_VENDOR_ID_TIMEDIA, PCI_DEVICE_ID_TIMEDIA_1889,
2023                 PCI_VENDOR_ID_TIMEDIA, PCI_ANY_ID, 0, 0,
2024                 pbn_b0_bt_1_921600 },
2025
2026         /*
2027          * AFAVLAB serial card, from Harald Welte <laforge@gnumonks.org>
2028          */
2029         {       PCI_VENDOR_ID_AFAVLAB, PCI_DEVICE_ID_AFAVLAB_P028,
2030                 PCI_ANY_ID, PCI_ANY_ID, 0, 0,
2031                 pbn_b0_bt_8_115200 },
2032         {       PCI_VENDOR_ID_AFAVLAB, PCI_DEVICE_ID_AFAVLAB_P030,
2033                 PCI_ANY_ID, PCI_ANY_ID, 0, 0,
2034                 pbn_b0_bt_8_115200 },
2035
2036         {       PCI_VENDOR_ID_LAVA, PCI_DEVICE_ID_LAVA_DSERIAL,
2037                 PCI_ANY_ID, PCI_ANY_ID, 0, 0,
2038                 pbn_b0_bt_2_115200 },
2039         {       PCI_VENDOR_ID_LAVA, PCI_DEVICE_ID_LAVA_QUATRO_A,
2040                 PCI_ANY_ID, PCI_ANY_ID, 0, 0,
2041                 pbn_b0_bt_2_115200 },
2042         {       PCI_VENDOR_ID_LAVA, PCI_DEVICE_ID_LAVA_QUATRO_B,
2043                 PCI_ANY_ID, PCI_ANY_ID, 0, 0,
2044                 pbn_b0_bt_2_115200 },
2045         {       PCI_VENDOR_ID_LAVA, PCI_DEVICE_ID_LAVA_OCTO_A,
2046                 PCI_ANY_ID, PCI_ANY_ID, 0, 0,
2047                 pbn_b0_bt_4_460800 },
2048         {       PCI_VENDOR_ID_LAVA, PCI_DEVICE_ID_LAVA_OCTO_B,
2049                 PCI_ANY_ID, PCI_ANY_ID, 0, 0,
2050                 pbn_b0_bt_4_460800 },
2051         {       PCI_VENDOR_ID_LAVA, PCI_DEVICE_ID_LAVA_PORT_PLUS,
2052                 PCI_ANY_ID, PCI_ANY_ID, 0, 0,
2053                 pbn_b0_bt_2_460800 },
2054         {       PCI_VENDOR_ID_LAVA, PCI_DEVICE_ID_LAVA_QUAD_A,
2055                 PCI_ANY_ID, PCI_ANY_ID, 0, 0,
2056                 pbn_b0_bt_2_460800 },
2057         {       PCI_VENDOR_ID_LAVA, PCI_DEVICE_ID_LAVA_QUAD_B,
2058                 PCI_ANY_ID, PCI_ANY_ID, 0, 0,
2059                 pbn_b0_bt_2_460800 },
2060         {       PCI_VENDOR_ID_LAVA, PCI_DEVICE_ID_LAVA_SSERIAL,
2061                 PCI_ANY_ID, PCI_ANY_ID, 0, 0,
2062                 pbn_b0_bt_1_115200 },
2063         {       PCI_VENDOR_ID_LAVA, PCI_DEVICE_ID_LAVA_PORT_650,
2064                 PCI_ANY_ID, PCI_ANY_ID, 0, 0,
2065                 pbn_b0_bt_1_460800 },
2066
2067         /*
2068          * Dell Remote Access Card 4 - Tim_T_Murphy@Dell.com
2069          */
2070         {       PCI_VENDOR_ID_DELL, PCI_DEVICE_ID_DELL_RAC4,
2071                 PCI_ANY_ID, PCI_ANY_ID, 0, 0,
2072                 pbn_b1_1_1382400 },
2073
2074         /*
2075          * Dell Remote Access Card III - Tim_T_Murphy@Dell.com
2076          */
2077         {       PCI_VENDOR_ID_DELL, PCI_DEVICE_ID_DELL_RACIII,
2078                 PCI_ANY_ID, PCI_ANY_ID, 0, 0,
2079                 pbn_b1_1_1382400 },
2080
2081         /*
2082          * RAStel 2 port modem, gerg@moreton.com.au
2083          */
2084         {       PCI_VENDOR_ID_MORETON, PCI_DEVICE_ID_RASTEL_2PORT,
2085                 PCI_ANY_ID, PCI_ANY_ID, 0, 0,
2086                 pbn_b2_bt_2_115200 },
2087
2088         /*
2089          * EKF addition for i960 Boards form EKF with serial port
2090          */
2091         {       PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_80960_RP,
2092                 0xE4BF, PCI_ANY_ID, 0, 0,
2093                 pbn_intel_i960 },
2094
2095         /*
2096          * Xircom Cardbus/Ethernet combos
2097          */
2098         {       PCI_VENDOR_ID_XIRCOM, PCI_DEVICE_ID_XIRCOM_X3201_MDM,
2099                 PCI_ANY_ID, PCI_ANY_ID, 0, 0,
2100                 pbn_b0_1_115200 },
2101         /*
2102          * Xircom RBM56G cardbus modem - Dirk Arnold (temp entry)
2103          */
2104         {       PCI_VENDOR_ID_XIRCOM, PCI_DEVICE_ID_XIRCOM_RBM56G,
2105                 PCI_ANY_ID, PCI_ANY_ID, 0, 0,
2106                 pbn_b0_1_115200 },
2107
2108         /*
2109          * Untested PCI modems, sent in from various folks...
2110          */
2111
2112         /*
2113          * Elsa Model 56K PCI Modem, from Andreas Rath <arh@01019freenet.de>
2114          */
2115         {       PCI_VENDOR_ID_ROCKWELL, 0x1004,
2116                 0x1048, 0x1500, 0, 0,
2117                 pbn_b1_1_115200 },
2118
2119         {       PCI_VENDOR_ID_SGI, PCI_DEVICE_ID_SGI_IOC3,
2120                 0xFF00, 0, 0, 0,
2121                 pbn_sgi_ioc3 },
2122
2123         /*
2124          * HP Diva card
2125          */
2126         {       PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_DIVA,
2127                 PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_DIVA_RMP3, 0, 0,
2128                 pbn_b1_1_115200 },
2129         {       PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_DIVA,
2130                 PCI_ANY_ID, PCI_ANY_ID, 0, 0,
2131                 pbn_b0_5_115200 },
2132         {       PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_DIVA_AUX,
2133                 PCI_ANY_ID, PCI_ANY_ID, 0, 0,
2134                 pbn_b2_1_115200 },
2135
2136         /*
2137          * NEC Vrc-5074 (Nile 4) builtin UART.
2138          */
2139         {       PCI_VENDOR_ID_NEC, PCI_DEVICE_ID_NEC_NILE4,
2140                 PCI_ANY_ID, PCI_ANY_ID, 0, 0,
2141                 pbn_nec_nile4 },
2142
2143         {       PCI_VENDOR_ID_DCI, PCI_DEVICE_ID_DCI_PCCOM4,
2144                 PCI_ANY_ID, PCI_ANY_ID, 0, 0,
2145                 pbn_b3_4_115200 },
2146         {       PCI_VENDOR_ID_DCI, PCI_DEVICE_ID_DCI_PCCOM8,
2147                 PCI_ANY_ID, PCI_ANY_ID, 0, 0,
2148                 pbn_b3_8_115200 },
2149
2150         /*
2151          * Exar Corp. XR17C15[248] Dual/Quad/Octal UART
2152          */
2153         {       PCI_VENDOR_ID_EXAR, PCI_DEVICE_ID_EXAR_XR17C152,
2154                 PCI_ANY_ID, PCI_ANY_ID,
2155                 0,
2156                 0, pbn_exar_XR17C152 },
2157         {       PCI_VENDOR_ID_EXAR, PCI_DEVICE_ID_EXAR_XR17C154,
2158                 PCI_ANY_ID, PCI_ANY_ID,
2159                 0,
2160                 0, pbn_exar_XR17C154 },
2161         {       PCI_VENDOR_ID_EXAR, PCI_DEVICE_ID_EXAR_XR17C158,
2162                 PCI_ANY_ID, PCI_ANY_ID,
2163                 0,
2164                 0, pbn_exar_XR17C158 },
2165
2166         /*
2167          * Topic TP560 Data/Fax/Voice 56k modem (reported by Evan Clarke)
2168          */
2169         {       PCI_VENDOR_ID_TOPIC, PCI_DEVICE_ID_TOPIC_TP560,
2170                 PCI_ANY_ID, PCI_ANY_ID, 0, 0,
2171                 pbn_b0_1_115200 },
2172
2173         /*
2174          * These entries match devices with class COMMUNICATION_SERIAL,
2175          * COMMUNICATION_MODEM or COMMUNICATION_MULTISERIAL
2176          */
2177         {       PCI_ANY_ID, PCI_ANY_ID,
2178                 PCI_ANY_ID, PCI_ANY_ID,
2179                 PCI_CLASS_COMMUNICATION_SERIAL << 8,
2180                 0xffff00, pbn_default },
2181         {       PCI_ANY_ID, PCI_ANY_ID,
2182                 PCI_ANY_ID, PCI_ANY_ID,
2183                 PCI_CLASS_COMMUNICATION_MODEM << 8,
2184                 0xffff00, pbn_default },
2185         {       PCI_ANY_ID, PCI_ANY_ID,
2186                 PCI_ANY_ID, PCI_ANY_ID,
2187                 PCI_CLASS_COMMUNICATION_MULTISERIAL << 8,
2188                 0xffff00, pbn_default },
2189         { 0, }
2190 };
2191
2192 static struct pci_driver serial_pci_driver = {
2193         .name           = "serial",
2194         .probe          = pciserial_init_one,
2195         .remove         = __devexit_p(pciserial_remove_one),
2196         .suspend        = pciserial_suspend_one,
2197         .resume         = pciserial_resume_one,
2198         .id_table       = serial_pci_tbl,
2199 };
2200
2201 static int __init serial8250_pci_init(void)
2202 {
2203         return pci_register_driver(&serial_pci_driver);
2204 }
2205
2206 static void __exit serial8250_pci_exit(void)
2207 {
2208         pci_unregister_driver(&serial_pci_driver);
2209 }
2210
2211 module_init(serial8250_pci_init);
2212 module_exit(serial8250_pci_exit);
2213
2214 MODULE_LICENSE("GPL");
2215 MODULE_DESCRIPTION("Generic 8250/16x50 PCI serial probe module");
2216 MODULE_DEVICE_TABLE(pci, serial_pci_tbl);