Merge branch 'linus' into x86/core
[linux-2.6] / arch / arm / mach-ixp4xx / wg302v2-setup.c
1 /*
2  * arch/arm/mach-ixp4xx/wg302-setup.c
3  *
4  * Board setup for the Netgear WG302 v2 and WAG302 v2
5  *
6  * Copyright (C) 2007 Imre Kaloz <Kaloz@openwrt.org>
7  *
8  * based on coyote-setup.c:
9  *      Copyright (C) 2003-2005 MontaVista Software, Inc.
10  *
11  * Author: Imre Kaloz <kaloz@openwrt.org>
12  *
13  */
14
15 #include <linux/kernel.h>
16 #include <linux/init.h>
17 #include <linux/device.h>
18 #include <linux/serial.h>
19 #include <linux/tty.h>
20 #include <linux/serial_8250.h>
21 #include <linux/slab.h>
22
23 #include <asm/types.h>
24 #include <asm/setup.h>
25 #include <asm/memory.h>
26 #include <mach/hardware.h>
27 #include <asm/irq.h>
28 #include <asm/mach-types.h>
29 #include <asm/mach/arch.h>
30 #include <asm/mach/flash.h>
31
32 static struct flash_platform_data wg302v2_flash_data = {
33         .map_name       = "cfi_probe",
34         .width          = 2,
35 };
36
37 static struct resource wg302v2_flash_resource = {
38         .flags          = IORESOURCE_MEM,
39 };
40
41 static struct platform_device wg302v2_flash = {
42         .name           = "IXP4XX-Flash",
43         .id             = 0,
44         .dev            = {
45                 .platform_data = &wg302v2_flash_data,
46         },
47         .num_resources  = 1,
48         .resource       = &wg302v2_flash_resource,
49 };
50
51 static struct resource wg302v2_uart_resource = {
52         .start  = IXP4XX_UART2_BASE_PHYS,
53         .end    = IXP4XX_UART2_BASE_PHYS + 0x0fff,
54         .flags  = IORESOURCE_MEM,
55 };
56
57 static struct plat_serial8250_port wg302v2_uart_data[] = {
58         {
59                 .mapbase        = IXP4XX_UART2_BASE_PHYS,
60                 .membase        = (char *)IXP4XX_UART2_BASE_VIRT + REG_OFFSET,
61                 .irq            = IRQ_IXP4XX_UART2,
62                 .flags          = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
63                 .iotype         = UPIO_MEM,
64                 .regshift       = 2,
65                 .uartclk        = IXP4XX_UART_XTAL,
66         },
67         { },
68 };
69
70 static struct platform_device wg302v2_uart = {
71         .name           = "serial8250",
72         .id             = PLAT8250_DEV_PLATFORM,
73         .dev                    = {
74                 .platform_data  = wg302v2_uart_data,
75         },
76         .num_resources  = 1,
77         .resource       = &wg302v2_uart_resource,
78 };
79
80 static struct platform_device *wg302v2_devices[] __initdata = {
81         &wg302v2_flash,
82         &wg302v2_uart,
83 };
84
85 static void __init wg302v2_init(void)
86 {
87         ixp4xx_sys_init();
88
89         wg302v2_flash_resource.start = IXP4XX_EXP_BUS_BASE(0);
90         wg302v2_flash_resource.end = IXP4XX_EXP_BUS_BASE(0) + SZ_32M - 1;
91
92         *IXP4XX_EXP_CS0 |= IXP4XX_FLASH_WRITABLE;
93         *IXP4XX_EXP_CS1 = *IXP4XX_EXP_CS0;
94
95         platform_add_devices(wg302v2_devices, ARRAY_SIZE(wg302v2_devices));
96 }
97
98 #ifdef CONFIG_MACH_WG302V2
99 MACHINE_START(WG302V2, "Netgear WG302 v2 / WAG302 v2")
100         /* Maintainer: Imre Kaloz <kaloz@openwrt.org> */
101         .phys_io        = IXP4XX_PERIPHERAL_BASE_PHYS,
102         .io_pg_offst    = ((IXP4XX_PERIPHERAL_BASE_VIRT) >> 18) & 0xfffc,
103         .map_io         = ixp4xx_map_io,
104         .init_irq       = ixp4xx_init_irq,
105         .timer          = &ixp4xx_timer,
106         .boot_params    = 0x0100,
107         .init_machine   = wg302v2_init,
108 MACHINE_END
109 #endif