2 * Copyright ? 1997-2008 Alacritech, Inc. All rights reserved
4 * $Id: sxgphycode.h,v 1.2 2008/10/02 01:44:07 Exp $
8 * This file PHY microcode and register initialization data.
11 /**********************************************************************
13 **********************************************************************/
15 // The following contains both PHY microcode and PHY register
16 // initialization data. It is specific to both the PHY and the
17 // type of transceiver.
20 // Download for AEL2005C PHY with SR/LR transceiver (10GBASE-SR or 10GBASE-LR)
21 // AEL2005 SR firmware rev 18 (microInit_mdio_SR_AEL2005C_18.tx).
22 static struct phy_ucode PhyUcode[] = {
23 // NOTE: An address of 0 is a special case. When the download routine
24 // sees an address of 0, it does not write to the PHY. Instead, it delays
25 // the download. The length of the delay (in ms) is given in the data field.
26 // Delays are required at certain points.
28 // Platform-specific MDIO Patches:
29 // (include patches for 10G RX polarity flip, 50Mhz Synth, etc)
31 {0xc017, 0xfeb0}, // flip RX_LOS polarity (mandatory patch for SFP+ applications)
32 {0xC001, 0x0428}, // flip RX serial polarity
34 {0xc013, 0xf341}, // invert lxmit clock (mandatory patch)
35 {0xc210, 0x8000}, // reset datapath (mandatory patch)
36 {0xc210, 0x8100}, // reset datapath (mandatory patch)
37 {0xc210, 0x8000}, // reset datapath (mandatory patch)
38 {0xc210, 0x0000}, // reset datapath (mandatory patch)
39 {0x0000, 0x0032}, // wait for 50ms for datapath reset to complete. (mandatory patch)
41 // Transceiver-specific MDIO Patches:
42 {0xc003, 0x0181}, // (bit 7) enable the CDR inc setting in 1.C005 (mandatory patch for SR code)
43 {0xc010, 0x448a}, // (bit 14) mask out high BER input from the LOS signal in 1.000A (mandatory patch for SR code)
45 // Transceiver-specific Microcontroller Initialization:
46 {0xc04a, 0x5200}, // activate microcontroller and pause
47 {0x0000, 0x0032}, // wait 50ms for microcontroller before writing in code.
49 // code block starts here:
50 {0xcc00, 0x2ff4}, {0xcc01, 0x3cd4}, {0xcc02, 0x2015}, {0xcc03, 0x3125},
51 {0xcc04, 0x6524}, {0xcc05, 0x27ff}, {0xcc06, 0x300f}, {0xcc07, 0x2c8b},
52 {0xcc08, 0x300b}, {0xcc09, 0x4009}, {0xcc0a, 0x400e}, {0xcc0b, 0x2f12},
53 {0xcc0c, 0x3002}, {0xcc0d, 0x1002}, {0xcc0e, 0x2112}, {0xcc0f, 0x3012},
54 {0xcc10, 0x1002}, {0xcc11, 0x2572}, {0xcc12, 0x3012}, {0xcc13, 0x1002},
55 {0xcc14, 0xd01e}, {0xcc15, 0x2772}, {0xcc16, 0x3012}, {0xcc17, 0x1002},
56 {0xcc18, 0x2004}, {0xcc19, 0x3c84}, {0xcc1a, 0x6436}, {0xcc1b, 0x2007},
57 {0xcc1c, 0x3f87}, {0xcc1d, 0x8676}, {0xcc1e, 0x40b7}, {0xcc1f, 0xa746},
58 {0xcc20, 0x4047}, {0xcc21, 0x5673}, {0xcc22, 0x2982}, {0xcc23, 0x3002},
59 {0xcc24, 0x13d2}, {0xcc25, 0x8bbd}, {0xcc26, 0x2802}, {0xcc27, 0x3012},
60 {0xcc28, 0x1002}, {0xcc29, 0x2032}, {0xcc2a, 0x3012}, {0xcc2b, 0x1002},
61 {0xcc2c, 0x5cc3}, {0xcc2d, 0x0314}, {0xcc2e, 0x2942}, {0xcc2f, 0x3002},
62 {0xcc30, 0x1002}, {0xcc31, 0xd019}, {0xcc32, 0x2fd2}, {0xcc33, 0x3002},
63 {0xcc34, 0x1002}, {0xcc35, 0x2a04}, {0xcc36, 0x3c74}, {0xcc37, 0x6435},
64 {0xcc38, 0x2fa4}, {0xcc39, 0x3cd4}, {0xcc3a, 0x6624}, {0xcc3b, 0x5563},
65 {0xcc3c, 0x2d42}, {0xcc3d, 0x3002}, {0xcc3e, 0x13d2}, {0xcc3f, 0x464d},
66 {0xcc40, 0x2802}, {0xcc41, 0x3012}, {0xcc42, 0x1002}, {0xcc43, 0x2fd2},
67 {0xcc44, 0x3002}, {0xcc45, 0x1002}, {0xcc46, 0x2fb4}, {0xcc47, 0x3cd4},
68 {0xcc48, 0x6624}, {0xcc49, 0x5563}, {0xcc4a, 0x2d42}, {0xcc4b, 0x3002},
69 {0xcc4c, 0x13d2}, {0xcc4d, 0x2e72}, {0xcc4e, 0x3002}, {0xcc4f, 0x1002},
70 {0xcc50, 0x2f72}, {0xcc51, 0x3002}, {0xcc52, 0x1002}, {0xcc53, 0x0004},
71 {0xcc54, 0x2942}, {0xcc55, 0x3002}, {0xcc56, 0x1002}, {0xcc57, 0x2032},
72 {0xcc58, 0x3012}, {0xcc59, 0x1002}, {0xcc5a, 0x5cc3}, {0xcc5b, 0x0317},
73 {0xcc5c, 0x2f12}, {0xcc5d, 0x3002}, {0xcc5e, 0x1002}, {0xcc5f, 0x2942},
74 {0xcc60, 0x3002}, {0xcc61, 0x1002}, {0xcc62, 0x22cd}, {0xcc63, 0x301d},
75 {0xcc64, 0x2802}, {0xcc65, 0x3012}, {0xcc66, 0x1002}, {0xcc67, 0x20b2},
76 {0xcc68, 0x3012}, {0xcc69, 0x1002}, {0xcc6a, 0x5aa3}, {0xcc6b, 0x2dc2},
77 {0xcc6c, 0x3002}, {0xcc6d, 0x1312}, {0xcc6e, 0x2d02}, {0xcc6f, 0x3002},
78 {0xcc70, 0x1002}, {0xcc71, 0x2807}, {0xcc72, 0x31a7}, {0xcc73, 0x20c4},
79 {0xcc74, 0x3c24}, {0xcc75, 0x6724}, {0xcc76, 0x1002}, {0xcc77, 0x2807},
80 {0xcc78, 0x3187}, {0xcc79, 0x20c4}, {0xcc7a, 0x3c24}, {0xcc7b, 0x6724},
81 {0xcc7c, 0x1002}, {0xcc7d, 0x2514}, {0xcc7e, 0x3c64}, {0xcc7f, 0x6436},
82 {0xcc80, 0xdff4}, {0xcc81, 0x6436}, {0xcc82, 0x1002}, {0xcc83, 0x40a4},
83 {0xcc84, 0x643c}, {0xcc85, 0x4016}, {0xcc86, 0x8c6c}, {0xcc87, 0x2b24},
84 {0xcc88, 0x3c24}, {0xcc89, 0x6435}, {0xcc8a, 0x1002}, {0xcc8b, 0x2b24},
85 {0xcc8c, 0x3c24}, {0xcc8d, 0x643a}, {0xcc8e, 0x4025}, {0xcc8f, 0x8a5a},
86 {0xcc90, 0x1002}, {0xcc91, 0x26d1}, {0xcc92, 0x3011}, {0xcc93, 0x1001},
87 {0xcc94, 0xc7a0}, {0xcc95, 0x0100}, {0xcc96, 0xc502}, {0xcc97, 0x53ac},
88 {0xcc98, 0xc503}, {0xcc99, 0xd5d5}, {0xcc9a, 0xc600}, {0xcc9b, 0x2a6d},
89 {0xcc9c, 0xc601}, {0xcc9d, 0x2a4c}, {0xcc9e, 0xc602}, {0xcc9f, 0x0111},
90 {0xcca0, 0xc60c}, {0xcca1, 0x5900}, {0xcca2, 0xc710}, {0xcca3, 0x0700},
91 {0xcca4, 0xc718}, {0xcca5, 0x0700}, {0xcca6, 0xc720}, {0xcca7, 0x4700},
92 {0xcca8, 0xc801}, {0xcca9, 0x7f50}, {0xccaa, 0xc802}, {0xccab, 0x7760},
93 {0xccac, 0xc803}, {0xccad, 0x7fce}, {0xccae, 0xc804}, {0xccaf, 0x5700},
94 {0xccb0, 0xc805}, {0xccb1, 0x5f11}, {0xccb2, 0xc806}, {0xccb3, 0x4751},
95 {0xccb4, 0xc807}, {0xccb5, 0x57e1}, {0xccb6, 0xc808}, {0xccb7, 0x2700},
96 {0xccb8, 0xc809}, {0xccb9, 0x0000}, {0xccba, 0xc821}, {0xccbb, 0x0002},
97 {0xccbc, 0xc822}, {0xccbd, 0x0014}, {0xccbe, 0xc832}, {0xccbf, 0x1186},
98 {0xccc0, 0xc847}, {0xccc1, 0x1e02}, {0xccc2, 0xc013}, {0xccc3, 0xf341},
99 {0xccc4, 0xc01a}, {0xccc5, 0x0446}, {0xccc6, 0xc024}, {0xccc7, 0x1000},
100 {0xccc8, 0xc025}, {0xccc9, 0x0a00}, {0xccca, 0xc026}, {0xcccb, 0x0c0c},
101 {0xcccc, 0xc027}, {0xcccd, 0x0c0c}, {0xccce, 0xc029}, {0xcccf, 0x00a0},
102 {0xccd0, 0xc030}, {0xccd1, 0x0a00}, {0xccd2, 0xc03c}, {0xccd3, 0x001c},
103 {0xccd4, 0xc005}, {0xccd5, 0x7a06}, {0xccd6, 0x0000}, {0xccd7, 0x26d1},
104 {0xccd8, 0x3011}, {0xccd9, 0x1001}, {0xccda, 0xc620}, {0xccdb, 0x0000},
105 {0xccdc, 0xc621}, {0xccdd, 0x003f}, {0xccde, 0xc622}, {0xccdf, 0x0000},
106 {0xcce0, 0xc623}, {0xcce1, 0x0000}, {0xcce2, 0xc624}, {0xcce3, 0x0000},
107 {0xcce4, 0xc625}, {0xcce5, 0x0000}, {0xcce6, 0xc627}, {0xcce7, 0x0000},
108 {0xcce8, 0xc628}, {0xcce9, 0x0000}, {0xccea, 0xc62c}, {0xcceb, 0x0000},
109 {0xccec, 0x0000}, {0xcced, 0x2806}, {0xccee, 0x3cb6}, {0xccef, 0xc161},
110 {0xccf0, 0x6134}, {0xccf1, 0x6135}, {0xccf2, 0x5443}, {0xccf3, 0x0303},
111 {0xccf4, 0x6524}, {0xccf5, 0x000b}, {0xccf6, 0x1002}, {0xccf7, 0x2104},
112 {0xccf8, 0x3c24}, {0xccf9, 0x2105}, {0xccfa, 0x3805}, {0xccfb, 0x6524},
113 {0xccfc, 0xdff4}, {0xccfd, 0x4005}, {0xccfe, 0x6524}, {0xccff, 0x1002},
114 {0xcd00, 0x5dd3}, {0xcd01, 0x0306}, {0xcd02, 0x2ff7}, {0xcd03, 0x38f7},
115 {0xcd04, 0x60b7}, {0xcd05, 0xdffd}, {0xcd06, 0x000a}, {0xcd07, 0x1002},
119 // Unpause the microcontroller to start program
122 {0x0000, 0x000A}, // wait 10ms just to be safe
124 // Configure the LED's
125 {0xc214, 0x0099}, // configure the LED drivers (for Sahara rev B)
126 {0xc216, 0x0400}, // configure the one LED
127 {0xc217, 0x0000}, // don't drive the 2nd LED (if it exists)
129 {0xffff, 0xffff} // table terminator
projects / linux-2.6 / blob