Merge git://git.kernel.org/pub/scm/linux/kernel/git/mason/btrfs-unstable

[linux-2.6] / drivers / scsi / lpfc / lpfc_scsi.c

/*******************************************************************
 * This file is part of the Emulex Linux Device Driver for         *
 * Fibre Channel Host Bus Adapters.                                *
 * Copyright (C) 2004-2009 Emulex.  All rights reserved.           *
 * EMULEX and SLI are trademarks of Emulex.                        *
 * www.emulex.com                                                  *
 * Portions Copyright (C) 2004-2005 Christoph Hellwig              *
 *                                                                 *
 * This program is free software; you can redistribute it and/or   *
 * modify it under the terms of version 2 of the GNU General       *
 * Public License as published by the Free Software Foundation.    *
 * This program is distributed in the hope that it will be useful. *
 * ALL EXPRESS OR IMPLIED CONDITIONS, REPRESENTATIONS AND          *
 * WARRANTIES, INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY,  *
 * FITNESS FOR A PARTICULAR PURPOSE, OR NON-INFRINGEMENT, ARE      *
 * DISCLAIMED, EXCEPT TO THE EXTENT THAT SUCH DISCLAIMERS ARE HELD *
 * TO BE LEGALLY INVALID.  See the GNU General Public License for  *
 * more details, a copy of which can be found in the file COPYING  *
 * included with this package.                                     *
 *******************************************************************/
#include <linux/pci.h>
#include <linux/interrupt.h>
#include <linux/delay.h>
#include <asm/unaligned.h>

#include <scsi/scsi.h>
#include <scsi/scsi_device.h>
#include <scsi/scsi_eh.h>
#include <scsi/scsi_host.h>
#include <scsi/scsi_tcq.h>
#include <scsi/scsi_transport_fc.h>

#include "lpfc_version.h"
#include "lpfc_hw4.h"
#include "lpfc_hw.h"
#include "lpfc_sli.h"
#include "lpfc_sli4.h"
#include "lpfc_nl.h"
#include "lpfc_disc.h"
#include "lpfc_scsi.h"
#include "lpfc.h"
#include "lpfc_logmsg.h"
#include "lpfc_crtn.h"
#include "lpfc_vport.h"

#define LPFC_RESET_WAIT  2
#define LPFC_ABORT_WAIT  2

int _dump_buf_done;

static char *dif_op_str[] = {
        "SCSI_PROT_NORMAL",
        "SCSI_PROT_READ_INSERT",
        "SCSI_PROT_WRITE_STRIP",
        "SCSI_PROT_READ_STRIP",
        "SCSI_PROT_WRITE_INSERT",
        "SCSI_PROT_READ_PASS",
        "SCSI_PROT_WRITE_PASS",
        "SCSI_PROT_READ_CONVERT",
        "SCSI_PROT_WRITE_CONVERT"
};
static void
lpfc_release_scsi_buf_s4(struct lpfc_hba *phba, struct lpfc_scsi_buf *psb);

static void
lpfc_debug_save_data(struct scsi_cmnd *cmnd)
{
        void *src, *dst;
        struct scatterlist *sgde = scsi_sglist(cmnd);

        if (!_dump_buf_data) {
                printk(KERN_ERR "BLKGRD ERROR %s _dump_buf_data is NULL\n",
                                __func__);
                return;
        }


        if (!sgde) {
                printk(KERN_ERR "BLKGRD ERROR: data scatterlist is null\n");
                return;
        }

        dst = (void *) _dump_buf_data;
        while (sgde) {
                src = sg_virt(sgde);
                memcpy(dst, src, sgde->length);
                dst += sgde->length;
                sgde = sg_next(sgde);
        }
}

static void
lpfc_debug_save_dif(struct scsi_cmnd *cmnd)
{
        void *src, *dst;
        struct scatterlist *sgde = scsi_prot_sglist(cmnd);

        if (!_dump_buf_dif) {
                printk(KERN_ERR "BLKGRD ERROR %s _dump_buf_data is NULL\n",
                                __func__);
                return;
        }

        if (!sgde) {
                printk(KERN_ERR "BLKGRD ERROR: prot scatterlist is null\n");
                return;
        }

        dst = _dump_buf_dif;
        while (sgde) {
                src = sg_virt(sgde);
                memcpy(dst, src, sgde->length);
                dst += sgde->length;
                sgde = sg_next(sgde);
        }
}

/**
 * lpfc_sli4_set_rsp_sgl_last - Set the last bit in the response sge.
 * @phba: Pointer to HBA object.
 * @lpfc_cmd: lpfc scsi command object pointer.
 *
 * This function is called from the lpfc_prep_task_mgmt_cmd function to
 * set the last bit in the response sge entry.
 **/
static void
lpfc_sli4_set_rsp_sgl_last(struct lpfc_hba *phba,
                                struct lpfc_scsi_buf *lpfc_cmd)
{
        struct sli4_sge *sgl = (struct sli4_sge *)lpfc_cmd->fcp_bpl;
        if (sgl) {
                sgl += 1;
                sgl->word2 = le32_to_cpu(sgl->word2);
                bf_set(lpfc_sli4_sge_last, sgl, 1);
                sgl->word2 = cpu_to_le32(sgl->word2);
        }
}

/**
 * lpfc_update_stats - Update statistical data for the command completion
 * @phba: Pointer to HBA object.
 * @lpfc_cmd: lpfc scsi command object pointer.
 *
 * This function is called when there is a command completion and this
 * function updates the statistical data for the command completion.
 **/
static void
lpfc_update_stats(struct lpfc_hba *phba, struct  lpfc_scsi_buf *lpfc_cmd)
{
        struct lpfc_rport_data *rdata = lpfc_cmd->rdata;
        struct lpfc_nodelist *pnode = rdata->pnode;
        struct scsi_cmnd *cmd = lpfc_cmd->pCmd;
        unsigned long flags;
        struct Scsi_Host  *shost = cmd->device->host;
        struct lpfc_vport *vport = (struct lpfc_vport *) shost->hostdata;
        unsigned long latency;
        int i;

        if (cmd->result)
                return;

        latency = jiffies_to_msecs((long)jiffies - (long)lpfc_cmd->start_time);

        spin_lock_irqsave(shost->host_lock, flags);
        if (!vport->stat_data_enabled ||
                vport->stat_data_blocked ||
                !pnode->lat_data ||
                (phba->bucket_type == LPFC_NO_BUCKET)) {
                spin_unlock_irqrestore(shost->host_lock, flags);
                return;
        }

        if (phba->bucket_type == LPFC_LINEAR_BUCKET) {
                i = (latency + phba->bucket_step - 1 - phba->bucket_base)/
                        phba->bucket_step;
                /* check array subscript bounds */
                if (i < 0)
                        i = 0;
                else if (i >= LPFC_MAX_BUCKET_COUNT)
                        i = LPFC_MAX_BUCKET_COUNT - 1;
        } else {
                for (i = 0; i < LPFC_MAX_BUCKET_COUNT-1; i++)
                        if (latency <= (phba->bucket_base +
                                ((1<<i)*phba->bucket_step)))
                                break;
        }

        pnode->lat_data[i].cmd_count++;
        spin_unlock_irqrestore(shost->host_lock, flags);
}

/**
 * lpfc_send_sdev_queuedepth_change_event - Posts a queuedepth change event
 * @phba: Pointer to HBA context object.
 * @vport: Pointer to vport object.
 * @ndlp: Pointer to FC node associated with the target.
 * @lun: Lun number of the scsi device.
 * @old_val: Old value of the queue depth.
 * @new_val: New value of the queue depth.
 *
 * This function sends an event to the mgmt application indicating
 * there is a change in the scsi device queue depth.
 **/
static void
lpfc_send_sdev_queuedepth_change_event(struct lpfc_hba *phba,
                struct lpfc_vport  *vport,
                struct lpfc_nodelist *ndlp,
                uint32_t lun,
                uint32_t old_val,
                uint32_t new_val)
{
        struct lpfc_fast_path_event *fast_path_evt;
        unsigned long flags;

        fast_path_evt = lpfc_alloc_fast_evt(phba);
        if (!fast_path_evt)
                return;

        fast_path_evt->un.queue_depth_evt.scsi_event.event_type =
                FC_REG_SCSI_EVENT;
        fast_path_evt->un.queue_depth_evt.scsi_event.subcategory =
                LPFC_EVENT_VARQUEDEPTH;

        /* Report all luns with change in queue depth */
        fast_path_evt->un.queue_depth_evt.scsi_event.lun = lun;
        if (ndlp && NLP_CHK_NODE_ACT(ndlp)) {
                memcpy(&fast_path_evt->un.queue_depth_evt.scsi_event.wwpn,
                        &ndlp->nlp_portname, sizeof(struct lpfc_name));
                memcpy(&fast_path_evt->un.queue_depth_evt.scsi_event.wwnn,
                        &ndlp->nlp_nodename, sizeof(struct lpfc_name));
        }

        fast_path_evt->un.queue_depth_evt.oldval = old_val;
        fast_path_evt->un.queue_depth_evt.newval = new_val;
        fast_path_evt->vport = vport;

        fast_path_evt->work_evt.evt = LPFC_EVT_FASTPATH_MGMT_EVT;
        spin_lock_irqsave(&phba->hbalock, flags);
        list_add_tail(&fast_path_evt->work_evt.evt_listp, &phba->work_list);
        spin_unlock_irqrestore(&phba->hbalock, flags);
        lpfc_worker_wake_up(phba);

        return;
}

/**
 * lpfc_rampdown_queue_depth - Post RAMP_DOWN_QUEUE event to worker thread
 * @phba: The Hba for which this call is being executed.
 *
 * This routine is called when there is resource error in driver or firmware.
 * This routine posts WORKER_RAMP_DOWN_QUEUE event for @phba. This routine
 * posts at most 1 event each second. This routine wakes up worker thread of
 * @phba to process WORKER_RAM_DOWN_EVENT event.
 *
 * This routine should be called with no lock held.
 **/
void
lpfc_rampdown_queue_depth(struct lpfc_hba *phba)
{
        unsigned long flags;
        uint32_t evt_posted;

        spin_lock_irqsave(&phba->hbalock, flags);
        atomic_inc(&phba->num_rsrc_err);
        phba->last_rsrc_error_time = jiffies;

        if ((phba->last_ramp_down_time + QUEUE_RAMP_DOWN_INTERVAL) > jiffies) {
                spin_unlock_irqrestore(&phba->hbalock, flags);
                return;
        }

        phba->last_ramp_down_time = jiffies;

        spin_unlock_irqrestore(&phba->hbalock, flags);

        spin_lock_irqsave(&phba->pport->work_port_lock, flags);
        evt_posted = phba->pport->work_port_events & WORKER_RAMP_DOWN_QUEUE;
        if (!evt_posted)
                phba->pport->work_port_events |= WORKER_RAMP_DOWN_QUEUE;
        spin_unlock_irqrestore(&phba->pport->work_port_lock, flags);

        if (!evt_posted)
                lpfc_worker_wake_up(phba);
        return;
}

/**
 * lpfc_rampup_queue_depth - Post RAMP_UP_QUEUE event for worker thread
 * @phba: The Hba for which this call is being executed.
 *
 * This routine post WORKER_RAMP_UP_QUEUE event for @phba vport. This routine
 * post at most 1 event every 5 minute after last_ramp_up_time or
 * last_rsrc_error_time.  This routine wakes up worker thread of @phba
 * to process WORKER_RAM_DOWN_EVENT event.
 *
 * This routine should be called with no lock held.
 **/
static inline void
lpfc_rampup_queue_depth(struct lpfc_vport  *vport,
                        uint32_t queue_depth)
{
        unsigned long flags;
        struct lpfc_hba *phba = vport->phba;
        uint32_t evt_posted;
        atomic_inc(&phba->num_cmd_success);

        if (vport->cfg_lun_queue_depth <= queue_depth)
                return;
        spin_lock_irqsave(&phba->hbalock, flags);
        if (((phba->last_ramp_up_time + QUEUE_RAMP_UP_INTERVAL) > jiffies) ||
         ((phba->last_rsrc_error_time + QUEUE_RAMP_UP_INTERVAL ) > jiffies)) {
                spin_unlock_irqrestore(&phba->hbalock, flags);
                return;
        }
        phba->last_ramp_up_time = jiffies;
        spin_unlock_irqrestore(&phba->hbalock, flags);

        spin_lock_irqsave(&phba->pport->work_port_lock, flags);
        evt_posted = phba->pport->work_port_events & WORKER_RAMP_UP_QUEUE;
        if (!evt_posted)
                phba->pport->work_port_events |= WORKER_RAMP_UP_QUEUE;
        spin_unlock_irqrestore(&phba->pport->work_port_lock, flags);

        if (!evt_posted)
                lpfc_worker_wake_up(phba);
        return;
}

/**
 * lpfc_ramp_down_queue_handler - WORKER_RAMP_DOWN_QUEUE event handler
 * @phba: The Hba for which this call is being executed.
 *
 * This routine is called to  process WORKER_RAMP_DOWN_QUEUE event for worker
 * thread.This routine reduces queue depth for all scsi device on each vport
 * associated with @phba.
 **/
void
lpfc_ramp_down_queue_handler(struct lpfc_hba *phba)
{
        struct lpfc_vport **vports;
        struct Scsi_Host  *shost;
        struct scsi_device *sdev;
        unsigned long new_queue_depth, old_queue_depth;
        unsigned long num_rsrc_err, num_cmd_success;
        int i;
        struct lpfc_rport_data *rdata;

        num_rsrc_err = atomic_read(&phba->num_rsrc_err);
        num_cmd_success = atomic_read(&phba->num_cmd_success);

        vports = lpfc_create_vport_work_array(phba);
        if (vports != NULL)
                for (i = 0; i <= phba->max_vports && vports[i] != NULL; i++) {
                        shost = lpfc_shost_from_vport(vports[i]);
                        shost_for_each_device(sdev, shost) {
                                new_queue_depth =
                                        sdev->queue_depth * num_rsrc_err /
                                        (num_rsrc_err + num_cmd_success);
                                if (!new_queue_depth)
                                        new_queue_depth = sdev->queue_depth - 1;
                                else
                                        new_queue_depth = sdev->queue_depth -
                                                                new_queue_depth;
                                old_queue_depth = sdev->queue_depth;
                                if (sdev->ordered_tags)
                                        scsi_adjust_queue_depth(sdev,
                                                        MSG_ORDERED_TAG,
                                                        new_queue_depth);
                                else
                                        scsi_adjust_queue_depth(sdev,
                                                        MSG_SIMPLE_TAG,
                                                        new_queue_depth);
                                rdata = sdev->hostdata;
                                if (rdata)
                                        lpfc_send_sdev_queuedepth_change_event(
                                                phba, vports[i],
                                                rdata->pnode,
                                                sdev->lun, old_queue_depth,
                                                new_queue_depth);
                        }
                }
        lpfc_destroy_vport_work_array(phba, vports);
        atomic_set(&phba->num_rsrc_err, 0);
        atomic_set(&phba->num_cmd_success, 0);
}

/**
 * lpfc_ramp_up_queue_handler - WORKER_RAMP_UP_QUEUE event handler
 * @phba: The Hba for which this call is being executed.
 *
 * This routine is called to  process WORKER_RAMP_UP_QUEUE event for worker
 * thread.This routine increases queue depth for all scsi device on each vport
 * associated with @phba by 1. This routine also sets @phba num_rsrc_err and
 * num_cmd_success to zero.
 **/
void
lpfc_ramp_up_queue_handler(struct lpfc_hba *phba)
{
        struct lpfc_vport **vports;
        struct Scsi_Host  *shost;
        struct scsi_device *sdev;
        int i;
        struct lpfc_rport_data *rdata;

        vports = lpfc_create_vport_work_array(phba);
        if (vports != NULL)
                for (i = 0; i <= phba->max_vports && vports[i] != NULL; i++) {
                        shost = lpfc_shost_from_vport(vports[i]);
                        shost_for_each_device(sdev, shost) {
                                if (vports[i]->cfg_lun_queue_depth <=
                                    sdev->queue_depth)
                                        continue;
                                if (sdev->ordered_tags)
                                        scsi_adjust_queue_depth(sdev,
                                                        MSG_ORDERED_TAG,
                                                        sdev->queue_depth+1);
                                else
                                        scsi_adjust_queue_depth(sdev,
                                                        MSG_SIMPLE_TAG,
                                                        sdev->queue_depth+1);
                                rdata = sdev->hostdata;
                                if (rdata)
                                        lpfc_send_sdev_queuedepth_change_event(
                                                phba, vports[i],
                                                rdata->pnode,
                                                sdev->lun,
                                                sdev->queue_depth - 1,
                                                sdev->queue_depth);
                        }
                }
        lpfc_destroy_vport_work_array(phba, vports);
        atomic_set(&phba->num_rsrc_err, 0);
        atomic_set(&phba->num_cmd_success, 0);
}

/**
 * lpfc_scsi_dev_block - set all scsi hosts to block state
 * @phba: Pointer to HBA context object.
 *
 * This function walks vport list and set each SCSI host to block state
 * by invoking fc_remote_port_delete() routine. This function is invoked
 * with EEH when device's PCI slot has been permanently disabled.
 **/
void
lpfc_scsi_dev_block(struct lpfc_hba *phba)
{
        struct lpfc_vport **vports;
        struct Scsi_Host  *shost;
        struct scsi_device *sdev;
        struct fc_rport *rport;
        int i;

        vports = lpfc_create_vport_work_array(phba);
        if (vports != NULL)
                for (i = 0; i <= phba->max_vports && vports[i] != NULL; i++) {
                        shost = lpfc_shost_from_vport(vports[i]);
                        shost_for_each_device(sdev, shost) {
                                rport = starget_to_rport(scsi_target(sdev));
                                fc_remote_port_delete(rport);
                        }
                }
        lpfc_destroy_vport_work_array(phba, vports);
}

/**
 * lpfc_new_scsi_buf_s3 - Scsi buffer allocator for HBA with SLI3 IF spec
 * @vport: The virtual port for which this call being executed.
 * @num_to_allocate: The requested number of buffers to allocate.
 *
 * This routine allocates a scsi buffer for device with SLI-3 interface spec,
 * the scsi buffer contains all the necessary information needed to initiate
 * a SCSI I/O. The non-DMAable buffer region contains information to build
 * the IOCB. The DMAable region contains memory for the FCP CMND, FCP RSP,
 * and the initial BPL. In addition to allocating memory, the FCP CMND and
 * FCP RSP BDEs are setup in the BPL and the BPL BDE is setup in the IOCB.
 *
 * Return codes:
 *   int - number of scsi buffers that were allocated.
 *   0 = failure, less than num_to_alloc is a partial failure.
 **/
static int
lpfc_new_scsi_buf_s3(struct lpfc_vport *vport, int num_to_alloc)
{
        struct lpfc_hba *phba = vport->phba;
        struct lpfc_scsi_buf *psb;
        struct ulp_bde64 *bpl;
        IOCB_t *iocb;
        dma_addr_t pdma_phys_fcp_cmd;
        dma_addr_t pdma_phys_fcp_rsp;
        dma_addr_t pdma_phys_bpl;
        uint16_t iotag;
        int bcnt;

        for (bcnt = 0; bcnt < num_to_alloc; bcnt++) {
                psb = kzalloc(sizeof(struct lpfc_scsi_buf), GFP_KERNEL);
                if (!psb)
                        break;

                /*
                 * Get memory from the pci pool to map the virt space to pci
                 * bus space for an I/O.  The DMA buffer includes space for the
                 * struct fcp_cmnd, struct fcp_rsp and the number of bde's
                 * necessary to support the sg_tablesize.
                 */
                psb->data = pci_pool_alloc(phba->lpfc_scsi_dma_buf_pool,
                                        GFP_KERNEL, &psb->dma_handle);
                if (!psb->data) {
                        kfree(psb);
                        break;
                }

                /* Initialize virtual ptrs to dma_buf region. */
                memset(psb->data, 0, phba->cfg_sg_dma_buf_size);

                /* Allocate iotag for psb->cur_iocbq. */
                iotag = lpfc_sli_next_iotag(phba, &psb->cur_iocbq);
                if (iotag == 0) {
                        pci_pool_free(phba->lpfc_scsi_dma_buf_pool,
                                        psb->data, psb->dma_handle);
                        kfree(psb);
                        break;
                }
                psb->cur_iocbq.iocb_flag |= LPFC_IO_FCP;

                psb->fcp_cmnd = psb->data;
                psb->fcp_rsp = psb->data + sizeof(struct fcp_cmnd);
                psb->fcp_bpl = psb->data + sizeof(struct fcp_cmnd) +
                        sizeof(struct fcp_rsp);

                /* Initialize local short-hand pointers. */
                bpl = psb->fcp_bpl;
                pdma_phys_fcp_cmd = psb->dma_handle;
                pdma_phys_fcp_rsp = psb->dma_handle + sizeof(struct fcp_cmnd);
                pdma_phys_bpl = psb->dma_handle + sizeof(struct fcp_cmnd) +
                        sizeof(struct fcp_rsp);

                /*
                 * The first two bdes are the FCP_CMD and FCP_RSP. The balance
                 * are sg list bdes.  Initialize the first two and leave the
                 * rest for queuecommand.
                 */
                bpl[0].addrHigh = le32_to_cpu(putPaddrHigh(pdma_phys_fcp_cmd));
                bpl[0].addrLow = le32_to_cpu(putPaddrLow(pdma_phys_fcp_cmd));
                bpl[0].tus.f.bdeSize = sizeof(struct fcp_cmnd);
                bpl[0].tus.f.bdeFlags = BUFF_TYPE_BDE_64;
                bpl[0].tus.w = le32_to_cpu(bpl[0].tus.w);

                /* Setup the physical region for the FCP RSP */
                bpl[1].addrHigh = le32_to_cpu(putPaddrHigh(pdma_phys_fcp_rsp));
                bpl[1].addrLow = le32_to_cpu(putPaddrLow(pdma_phys_fcp_rsp));
                bpl[1].tus.f.bdeSize = sizeof(struct fcp_rsp);
                bpl[1].tus.f.bdeFlags = BUFF_TYPE_BDE_64;
                bpl[1].tus.w = le32_to_cpu(bpl[1].tus.w);

                /*
                 * Since the IOCB for the FCP I/O is built into this
                 * lpfc_scsi_buf, initialize it with all known data now.
                 */
                iocb = &psb->cur_iocbq.iocb;
                iocb->un.fcpi64.bdl.ulpIoTag32 = 0;
                if ((phba->sli_rev == 3) &&
                                !(phba->sli3_options & LPFC_SLI3_BG_ENABLED)) {
                        /* fill in immediate fcp command BDE */
                        iocb->un.fcpi64.bdl.bdeFlags = BUFF_TYPE_BDE_IMMED;
                        iocb->un.fcpi64.bdl.bdeSize = sizeof(struct fcp_cmnd);
                        iocb->un.fcpi64.bdl.addrLow = offsetof(IOCB_t,
                                        unsli3.fcp_ext.icd);
                        iocb->un.fcpi64.bdl.addrHigh = 0;
                        iocb->ulpBdeCount = 0;
                        iocb->ulpLe = 0;
                        /* fill in responce BDE */
                        iocb->unsli3.fcp_ext.rbde.tus.f.bdeFlags =
                                                        BUFF_TYPE_BDE_64;
                        iocb->unsli3.fcp_ext.rbde.tus.f.bdeSize =
                                sizeof(struct fcp_rsp);
                        iocb->unsli3.fcp_ext.rbde.addrLow =
                                putPaddrLow(pdma_phys_fcp_rsp);
                        iocb->unsli3.fcp_ext.rbde.addrHigh =
                                putPaddrHigh(pdma_phys_fcp_rsp);
                } else {
                        iocb->un.fcpi64.bdl.bdeFlags = BUFF_TYPE_BLP_64;
                        iocb->un.fcpi64.bdl.bdeSize =
                                        (2 * sizeof(struct ulp_bde64));
                        iocb->un.fcpi64.bdl.addrLow =
                                        putPaddrLow(pdma_phys_bpl);
                        iocb->un.fcpi64.bdl.addrHigh =
                                        putPaddrHigh(pdma_phys_bpl);
                        iocb->ulpBdeCount = 1;
                        iocb->ulpLe = 1;
                }
                iocb->ulpClass = CLASS3;
                psb->status = IOSTAT_SUCCESS;
                /* Put it back into the SCSI buffer list */
                lpfc_release_scsi_buf_s4(phba, psb);

        }

        return bcnt;
}

/**
 * lpfc_sli4_fcp_xri_aborted - Fast-path process of fcp xri abort
 * @phba: pointer to lpfc hba data structure.
 * @axri: pointer to the fcp xri abort wcqe structure.
 *
 * This routine is invoked by the worker thread to process a SLI4 fast-path
 * FCP aborted xri.
 **/
void
lpfc_sli4_fcp_xri_aborted(struct lpfc_hba *phba,
                          struct sli4_wcqe_xri_aborted *axri)
{
        uint16_t xri = bf_get(lpfc_wcqe_xa_xri, axri);
        struct lpfc_scsi_buf *psb, *next_psb;
        unsigned long iflag = 0;

        spin_lock_irqsave(&phba->sli4_hba.abts_scsi_buf_list_lock, iflag);
        list_for_each_entry_safe(psb, next_psb,
                &phba->sli4_hba.lpfc_abts_scsi_buf_list, list) {
                if (psb->cur_iocbq.sli4_xritag == xri) {
                        list_del(&psb->list);
                        psb->status = IOSTAT_SUCCESS;
                        spin_unlock_irqrestore(
                                &phba->sli4_hba.abts_scsi_buf_list_lock,
                                iflag);
                        lpfc_release_scsi_buf_s4(phba, psb);
                        return;
                }
        }
        spin_unlock_irqrestore(&phba->sli4_hba.abts_scsi_buf_list_lock,
                                iflag);
}

/**
 * lpfc_sli4_repost_scsi_sgl_list - Repsot the Scsi buffers sgl pages as block
 * @phba: pointer to lpfc hba data structure.
 *
 * This routine walks the list of scsi buffers that have been allocated and
 * repost them to the HBA by using SGL block post. This is needed after a
 * pci_function_reset/warm_start or start. The lpfc_hba_down_post_s4 routine
 * is responsible for moving all scsi buffers on the lpfc_abts_scsi_sgl_list
 * to the lpfc_scsi_buf_list. If the repost fails, reject all scsi buffers.
 *
 * Returns: 0 = success, non-zero failure.
 **/
int
lpfc_sli4_repost_scsi_sgl_list(struct lpfc_hba *phba)
{
        struct lpfc_scsi_buf *psb;
        int index, status, bcnt = 0, rcnt = 0, rc = 0;
        LIST_HEAD(sblist);

        for (index = 0; index < phba->sli4_hba.scsi_xri_cnt; index++) {
                psb = phba->sli4_hba.lpfc_scsi_psb_array[index];
                if (psb) {
                        /* Remove from SCSI buffer list */
                        list_del(&psb->list);
                        /* Add it to a local SCSI buffer list */
                        list_add_tail(&psb->list, &sblist);
                        if (++rcnt == LPFC_NEMBED_MBOX_SGL_CNT) {
                                bcnt = rcnt;
                                rcnt = 0;
                        }
                } else
                        /* A hole present in the XRI array, need to skip */
                        bcnt = rcnt;

                if (index == phba->sli4_hba.scsi_xri_cnt - 1)
                        /* End of XRI array for SCSI buffer, complete */
                        bcnt = rcnt;

                /* Continue until collect up to a nembed page worth of sgls */
                if (bcnt == 0)
                        continue;
                /* Now, post the SCSI buffer list sgls as a block */
                status = lpfc_sli4_post_scsi_sgl_block(phba, &sblist, bcnt);
                /* Reset SCSI buffer count for next round of posting */
                bcnt = 0;
                while (!list_empty(&sblist)) {
                        list_remove_head(&sblist, psb, struct lpfc_scsi_buf,
                                         list);
                        if (status) {
                                /* Put this back on the abort scsi list */
                                psb->status = IOSTAT_LOCAL_REJECT;
                                psb->result = IOERR_ABORT_REQUESTED;
                                rc++;
                        } else
                                psb->status = IOSTAT_SUCCESS;
                        /* Put it back into the SCSI buffer list */
                        lpfc_release_scsi_buf_s4(phba, psb);
                }
        }
        return rc;
}

/**
 * lpfc_new_scsi_buf_s4 - Scsi buffer allocator for HBA with SLI4 IF spec
 * @vport: The virtual port for which this call being executed.
 * @num_to_allocate: The requested number of buffers to allocate.
 *
 * This routine allocates a scsi buffer for device with SLI-4 interface spec,
 * the scsi buffer contains all the necessary information needed to initiate
 * a SCSI I/O.
 *
 * Return codes:
 *   int - number of scsi buffers that were allocated.
 *   0 = failure, less than num_to_alloc is a partial failure.
 **/
static int
lpfc_new_scsi_buf_s4(struct lpfc_vport *vport, int num_to_alloc)
{
        struct lpfc_hba *phba = vport->phba;
        struct lpfc_scsi_buf *psb;
        struct sli4_sge *sgl;
        IOCB_t *iocb;
        dma_addr_t pdma_phys_fcp_cmd;
        dma_addr_t pdma_phys_fcp_rsp;
        dma_addr_t pdma_phys_bpl, pdma_phys_bpl1;
        uint16_t iotag, last_xritag = NO_XRI;
        int status = 0, index;
        int bcnt;
        int non_sequential_xri = 0;
        int rc = 0;
        LIST_HEAD(sblist);

        for (bcnt = 0; bcnt < num_to_alloc; bcnt++) {
                psb = kzalloc(sizeof(struct lpfc_scsi_buf), GFP_KERNEL);
                if (!psb)
                        break;

                /*
                 * Get memory from the pci pool to map the virt space to pci bus
                 * space for an I/O.  The DMA buffer includes space for the
                 * struct fcp_cmnd, struct fcp_rsp and the number of bde's
                 * necessary to support the sg_tablesize.
                 */
                psb->data = pci_pool_alloc(phba->lpfc_scsi_dma_buf_pool,
                                                GFP_KERNEL, &psb->dma_handle);
                if (!psb->data) {
                        kfree(psb);
                        break;
                }

                /* Initialize virtual ptrs to dma_buf region. */
                memset(psb->data, 0, phba->cfg_sg_dma_buf_size);

                /* Allocate iotag for psb->cur_iocbq. */
                iotag = lpfc_sli_next_iotag(phba, &psb->cur_iocbq);
                if (iotag == 0) {
                        kfree(psb);
                        break;
                }

                psb->cur_iocbq.sli4_xritag = lpfc_sli4_next_xritag(phba);
                if (psb->cur_iocbq.sli4_xritag == NO_XRI) {
                        pci_pool_free(phba->lpfc_scsi_dma_buf_pool,
                              psb->data, psb->dma_handle);
                        kfree(psb);
                        break;
                }
                if (last_xritag != NO_XRI
                        && psb->cur_iocbq.sli4_xritag != (last_xritag+1)) {
                        non_sequential_xri = 1;
                } else
                        list_add_tail(&psb->list, &sblist);
                last_xritag = psb->cur_iocbq.sli4_xritag;

                index = phba->sli4_hba.scsi_xri_cnt++;
                psb->cur_iocbq.iocb_flag |= LPFC_IO_FCP;

                psb->fcp_bpl = psb->data;
                psb->fcp_cmnd = (psb->data + phba->cfg_sg_dma_buf_size)
                        - (sizeof(struct fcp_cmnd) + sizeof(struct fcp_rsp));
                psb->fcp_rsp = (struct fcp_rsp *)((uint8_t *)psb->fcp_cmnd +
                                        sizeof(struct fcp_cmnd));

                /* Initialize local short-hand pointers. */
                sgl = (struct sli4_sge *)psb->fcp_bpl;
                pdma_phys_bpl = psb->dma_handle;
                pdma_phys_fcp_cmd =
                        (psb->dma_handle + phba->cfg_sg_dma_buf_size)
                         - (sizeof(struct fcp_cmnd) + sizeof(struct fcp_rsp));
                pdma_phys_fcp_rsp = pdma_phys_fcp_cmd + sizeof(struct fcp_cmnd);

                /*
                 * The first two bdes are the FCP_CMD and FCP_RSP.  The balance
                 * are sg list bdes.  Initialize the first two and leave the
                 * rest for queuecommand.
                 */
                sgl->addr_hi = cpu_to_le32(putPaddrHigh(pdma_phys_fcp_cmd));
                sgl->addr_lo = cpu_to_le32(putPaddrLow(pdma_phys_fcp_cmd));
                bf_set(lpfc_sli4_sge_len, sgl, sizeof(struct fcp_cmnd));
                bf_set(lpfc_sli4_sge_last, sgl, 0);
                sgl->word2 = cpu_to_le32(sgl->word2);
                sgl->word3 = cpu_to_le32(sgl->word3);
                sgl++;

                /* Setup the physical region for the FCP RSP */
                sgl->addr_hi = cpu_to_le32(putPaddrHigh(pdma_phys_fcp_rsp));
                sgl->addr_lo = cpu_to_le32(putPaddrLow(pdma_phys_fcp_rsp));
                bf_set(lpfc_sli4_sge_len, sgl, sizeof(struct fcp_rsp));
                bf_set(lpfc_sli4_sge_last, sgl, 1);
                sgl->word2 = cpu_to_le32(sgl->word2);
                sgl->word3 = cpu_to_le32(sgl->word3);

                /*
                 * Since the IOCB for the FCP I/O is built into this
                 * lpfc_scsi_buf, initialize it with all known data now.
                 */
                iocb = &psb->cur_iocbq.iocb;
                iocb->un.fcpi64.bdl.ulpIoTag32 = 0;
                iocb->un.fcpi64.bdl.bdeFlags = BUFF_TYPE_BDE_64;
                /* setting the BLP size to 2 * sizeof BDE may not be correct.
                 * We are setting the bpl to point to out sgl. An sgl's
                 * entries are 16 bytes, a bpl entries are 12 bytes.
                 */
                iocb->un.fcpi64.bdl.bdeSize = sizeof(struct fcp_cmnd);
                iocb->un.fcpi64.bdl.addrLow = putPaddrLow(pdma_phys_fcp_cmd);
                iocb->un.fcpi64.bdl.addrHigh = putPaddrHigh(pdma_phys_fcp_cmd);
                iocb->ulpBdeCount = 1;
                iocb->ulpLe = 1;
                iocb->ulpClass = CLASS3;
                if (phba->cfg_sg_dma_buf_size > SGL_PAGE_SIZE)
                        pdma_phys_bpl1 = pdma_phys_bpl + SGL_PAGE_SIZE;
                else
                        pdma_phys_bpl1 = 0;
                psb->dma_phys_bpl = pdma_phys_bpl;
                phba->sli4_hba.lpfc_scsi_psb_array[index] = psb;
                if (non_sequential_xri) {
                        status = lpfc_sli4_post_sgl(phba, pdma_phys_bpl,
                                                pdma_phys_bpl1,
                                                psb->cur_iocbq.sli4_xritag);
                        if (status) {
                                /* Put this back on the abort scsi list */
                                psb->status = IOSTAT_LOCAL_REJECT;
                                psb->result = IOERR_ABORT_REQUESTED;
                                rc++;
                        } else
                                psb->status = IOSTAT_SUCCESS;
                        /* Put it back into the SCSI buffer list */
                        lpfc_release_scsi_buf_s4(phba, psb);
                        break;
                }
        }
        if (bcnt) {
                status = lpfc_sli4_post_scsi_sgl_block(phba, &sblist, bcnt);
                /* Reset SCSI buffer count for next round of posting */
                while (!list_empty(&sblist)) {
                        list_remove_head(&sblist, psb, struct lpfc_scsi_buf,
                                 list);
                        if (status) {
                                /* Put this back on the abort scsi list */
                                psb->status = IOSTAT_LOCAL_REJECT;
                                psb->result = IOERR_ABORT_REQUESTED;
                                rc++;
                        } else
                                psb->status = IOSTAT_SUCCESS;
                        /* Put it back into the SCSI buffer list */
                        lpfc_release_scsi_buf_s4(phba, psb);
                }
        }

        return bcnt + non_sequential_xri - rc;
}

/**
 * lpfc_new_scsi_buf - Wrapper funciton for scsi buffer allocator
 * @vport: The virtual port for which this call being executed.
 * @num_to_allocate: The requested number of buffers to allocate.
 *
 * This routine wraps the actual SCSI buffer allocator function pointer from
 * the lpfc_hba struct.
 *
 * Return codes:
 *   int - number of scsi buffers that were allocated.
 *   0 = failure, less than num_to_alloc is a partial failure.
 **/
static inline int
lpfc_new_scsi_buf(struct lpfc_vport *vport, int num_to_alloc)
{
        return vport->phba->lpfc_new_scsi_buf(vport, num_to_alloc);
}

/**
 * lpfc_get_scsi_buf - Get a scsi buffer from lpfc_scsi_buf_list of the HBA
 * @phba: The HBA for which this call is being executed.
 *
 * This routine removes a scsi buffer from head of @phba lpfc_scsi_buf_list list
 * and returns to caller.
 *
 * Return codes:
 *   NULL - Error
 *   Pointer to lpfc_scsi_buf - Success
 **/
static struct lpfc_scsi_buf*
lpfc_get_scsi_buf(struct lpfc_hba * phba)
{
        struct  lpfc_scsi_buf * lpfc_cmd = NULL;
        struct list_head *scsi_buf_list = &phba->lpfc_scsi_buf_list;
        unsigned long iflag = 0;

        spin_lock_irqsave(&phba->scsi_buf_list_lock, iflag);
        list_remove_head(scsi_buf_list, lpfc_cmd, struct lpfc_scsi_buf, list);
        if (lpfc_cmd) {
                lpfc_cmd->seg_cnt = 0;
                lpfc_cmd->nonsg_phys = 0;
                lpfc_cmd->prot_seg_cnt = 0;
        }
        spin_unlock_irqrestore(&phba->scsi_buf_list_lock, iflag);
        return  lpfc_cmd;
}

/**
 * lpfc_release_scsi_buf - Return a scsi buffer back to hba scsi buf list
 * @phba: The Hba for which this call is being executed.
 * @psb: The scsi buffer which is being released.
 *
 * This routine releases @psb scsi buffer by adding it to tail of @phba
 * lpfc_scsi_buf_list list.
 **/
static void
lpfc_release_scsi_buf_s3(struct lpfc_hba *phba, struct lpfc_scsi_buf *psb)
{
        unsigned long iflag = 0;

        spin_lock_irqsave(&phba->scsi_buf_list_lock, iflag);
        psb->pCmd = NULL;
        list_add_tail(&psb->list, &phba->lpfc_scsi_buf_list);
        spin_unlock_irqrestore(&phba->scsi_buf_list_lock, iflag);
}

/**
 * lpfc_release_scsi_buf_s4: Return a scsi buffer back to hba scsi buf list.
 * @phba: The Hba for which this call is being executed.
 * @psb: The scsi buffer which is being released.
 *
 * This routine releases @psb scsi buffer by adding it to tail of @phba
 * lpfc_scsi_buf_list list. For SLI4 XRI's are tied to the scsi buffer
 * and cannot be reused for at least RA_TOV amount of time if it was
 * aborted.
 **/
static void
lpfc_release_scsi_buf_s4(struct lpfc_hba *phba, struct lpfc_scsi_buf *psb)
{
        unsigned long iflag = 0;

        if (psb->status == IOSTAT_LOCAL_REJECT
                && psb->result == IOERR_ABORT_REQUESTED) {
                spin_lock_irqsave(&phba->sli4_hba.abts_scsi_buf_list_lock,
                                        iflag);
                psb->pCmd = NULL;
                list_add_tail(&psb->list,
                        &phba->sli4_hba.lpfc_abts_scsi_buf_list);
                spin_unlock_irqrestore(&phba->sli4_hba.abts_scsi_buf_list_lock,
                                        iflag);
        } else {

                spin_lock_irqsave(&phba->scsi_buf_list_lock, iflag);
                psb->pCmd = NULL;
                list_add_tail(&psb->list, &phba->lpfc_scsi_buf_list);
                spin_unlock_irqrestore(&phba->scsi_buf_list_lock, iflag);
        }
}

/**
 * lpfc_release_scsi_buf: Return a scsi buffer back to hba scsi buf list.
 * @phba: The Hba for which this call is being executed.
 * @psb: The scsi buffer which is being released.
 *
 * This routine releases @psb scsi buffer by adding it to tail of @phba
 * lpfc_scsi_buf_list list.
 **/
static void
lpfc_release_scsi_buf(struct lpfc_hba *phba, struct lpfc_scsi_buf *psb)
{

        phba->lpfc_release_scsi_buf(phba, psb);
}

/**
 * lpfc_scsi_prep_dma_buf_s3 - DMA mapping for scsi buffer to SLI3 IF spec
 * @phba: The Hba for which this call is being executed.
 * @lpfc_cmd: The scsi buffer which is going to be mapped.
 *
 * This routine does the pci dma mapping for scatter-gather list of scsi cmnd
 * field of @lpfc_cmd for device with SLI-3 interface spec. This routine scans
 * through sg elements and format the bdea. This routine also initializes all
 * IOCB fields which are dependent on scsi command request buffer.
 *
 * Return codes:
 *   1 - Error
 *   0 - Success
 **/
static int
lpfc_scsi_prep_dma_buf_s3(struct lpfc_hba *phba, struct lpfc_scsi_buf *lpfc_cmd)
{
        struct scsi_cmnd *scsi_cmnd = lpfc_cmd->pCmd;
        struct scatterlist *sgel = NULL;
        struct fcp_cmnd *fcp_cmnd = lpfc_cmd->fcp_cmnd;
        struct ulp_bde64 *bpl = lpfc_cmd->fcp_bpl;
        IOCB_t *iocb_cmd = &lpfc_cmd->cur_iocbq.iocb;
        struct ulp_bde64 *data_bde = iocb_cmd->unsli3.fcp_ext.dbde;
        dma_addr_t physaddr;
        uint32_t num_bde = 0;
        int nseg, datadir = scsi_cmnd->sc_data_direction;

        /*
         * There are three possibilities here - use scatter-gather segment, use
         * the single mapping, or neither.  Start the lpfc command prep by
         * bumping the bpl beyond the fcp_cmnd and fcp_rsp regions to the first
         * data bde entry.
         */
        bpl += 2;
        if (scsi_sg_count(scsi_cmnd)) {
                /*
                 * The driver stores the segment count returned from pci_map_sg
                 * because this a count of dma-mappings used to map the use_sg
                 * pages.  They are not guaranteed to be the same for those
                 * architectures that implement an IOMMU.
                 */

                nseg = dma_map_sg(&phba->pcidev->dev, scsi_sglist(scsi_cmnd),
                                  scsi_sg_count(scsi_cmnd), datadir);
                if (unlikely(!nseg))
                        return 1;

                lpfc_cmd->seg_cnt = nseg;
                if (lpfc_cmd->seg_cnt > phba->cfg_sg_seg_cnt) {
                        printk(KERN_ERR "%s: Too many sg segments from "
                               "dma_map_sg.  Config %d, seg_cnt %d\n",
                               __func__, phba->cfg_sg_seg_cnt,
                               lpfc_cmd->seg_cnt);
                        scsi_dma_unmap(scsi_cmnd);
                        return 1;
                }

                /*
                 * The driver established a maximum scatter-gather segment count
                 * during probe that limits the number of sg elements in any
                 * single scsi command.  Just run through the seg_cnt and format
                 * the bde's.
                 * When using SLI-3 the driver will try to fit all the BDEs into
                 * the IOCB. If it can't then the BDEs get added to a BPL as it
                 * does for SLI-2 mode.
                 */
                scsi_for_each_sg(scsi_cmnd, sgel, nseg, num_bde) {
                        physaddr = sg_dma_address(sgel);
                        if (phba->sli_rev == 3 &&
                            !(phba->sli3_options & LPFC_SLI3_BG_ENABLED) &&
                            nseg <= LPFC_EXT_DATA_BDE_COUNT) {
                                data_bde->tus.f.bdeFlags = BUFF_TYPE_BDE_64;
                                data_bde->tus.f.bdeSize = sg_dma_len(sgel);
                                data_bde->addrLow = putPaddrLow(physaddr);
                                data_bde->addrHigh = putPaddrHigh(physaddr);
                                data_bde++;
                        } else {
                                bpl->tus.f.bdeFlags = BUFF_TYPE_BDE_64;
                                bpl->tus.f.bdeSize = sg_dma_len(sgel);
                                bpl->tus.w = le32_to_cpu(bpl->tus.w);
                                bpl->addrLow =
                                        le32_to_cpu(putPaddrLow(physaddr));
                                bpl->addrHigh =
                                        le32_to_cpu(putPaddrHigh(physaddr));
                                bpl++;
                        }
                }
        }

        /*
         * Finish initializing those IOCB fields that are dependent on the
         * scsi_cmnd request_buffer.  Note that for SLI-2 the bdeSize is
         * explicitly reinitialized and for SLI-3 the extended bde count is
         * explicitly reinitialized since all iocb memory resources are reused.
         */
        if (phba->sli_rev == 3 &&
            !(phba->sli3_options & LPFC_SLI3_BG_ENABLED)) {
                if (num_bde > LPFC_EXT_DATA_BDE_COUNT) {
                        /*
                         * The extended IOCB format can only fit 3 BDE or a BPL.
                         * This I/O has more than 3 BDE so the 1st data bde will
                         * be a BPL that is filled in here.
                         */
                        physaddr = lpfc_cmd->dma_handle;
                        data_bde->tus.f.bdeFlags = BUFF_TYPE_BLP_64;
                        data_bde->tus.f.bdeSize = (num_bde *
                                                   sizeof(struct ulp_bde64));
                        physaddr += (sizeof(struct fcp_cmnd) +
                                     sizeof(struct fcp_rsp) +
                                     (2 * sizeof(struct ulp_bde64)));
                        data_bde->addrHigh = putPaddrHigh(physaddr);
                        data_bde->addrLow = putPaddrLow(physaddr);
                        /* ebde count includes the responce bde and data bpl */
                        iocb_cmd->unsli3.fcp_ext.ebde_count = 2;
                } else {
                        /* ebde count includes the responce bde and data bdes */
                        iocb_cmd->unsli3.fcp_ext.ebde_count = (num_bde + 1);
                }
        } else {
                iocb_cmd->un.fcpi64.bdl.bdeSize =
                        ((num_bde + 2) * sizeof(struct ulp_bde64));
        }
        fcp_cmnd->fcpDl = cpu_to_be32(scsi_bufflen(scsi_cmnd));

        /*
         * Due to difference in data length between DIF/non-DIF paths,
         * we need to set word 4 of IOCB here
         */
        iocb_cmd->un.fcpi.fcpi_parm = scsi_bufflen(scsi_cmnd);
        return 0;
}

/*
 * Given a scsi cmnd, determine the BlockGuard profile to be used
 * with the cmd
 */
static int
lpfc_sc_to_sli_prof(struct scsi_cmnd *sc)
{
        uint8_t guard_type = scsi_host_get_guard(sc->device->host);
        uint8_t ret_prof = LPFC_PROF_INVALID;

        if (guard_type == SHOST_DIX_GUARD_IP) {
                switch (scsi_get_prot_op(sc)) {
                case SCSI_PROT_READ_INSERT:
                case SCSI_PROT_WRITE_STRIP:
                        ret_prof = LPFC_PROF_AST2;
                        break;

                case SCSI_PROT_READ_STRIP:
                case SCSI_PROT_WRITE_INSERT:
                        ret_prof = LPFC_PROF_A1;
                        break;

                case SCSI_PROT_READ_CONVERT:
                case SCSI_PROT_WRITE_CONVERT:
                        ret_prof = LPFC_PROF_AST1;
                        break;

                case SCSI_PROT_READ_PASS:
                case SCSI_PROT_WRITE_PASS:
                case SCSI_PROT_NORMAL:
                default:
                        printk(KERN_ERR "Bad op/guard:%d/%d combination\n",
                                        scsi_get_prot_op(sc), guard_type);
                        break;

                }
        } else if (guard_type == SHOST_DIX_GUARD_CRC) {
                switch (scsi_get_prot_op(sc)) {
                case SCSI_PROT_READ_STRIP:
                case SCSI_PROT_WRITE_INSERT:
                        ret_prof = LPFC_PROF_A1;
                        break;

                case SCSI_PROT_READ_PASS:
                case SCSI_PROT_WRITE_PASS:
                        ret_prof = LPFC_PROF_C1;
                        break;

                case SCSI_PROT_READ_CONVERT:
                case SCSI_PROT_WRITE_CONVERT:
                case SCSI_PROT_READ_INSERT:
                case SCSI_PROT_WRITE_STRIP:
                case SCSI_PROT_NORMAL:
                default:
                        printk(KERN_ERR "Bad op/guard:%d/%d combination\n",
                                        scsi_get_prot_op(sc), guard_type);
                        break;
                }
        } else {
                /* unsupported format */
                BUG();
        }

        return ret_prof;
}

struct scsi_dif_tuple {
        __be16 guard_tag;       /* Checksum */
        __be16 app_tag;         /* Opaque storage */
        __be32 ref_tag;         /* Target LBA or indirect LBA */
};

static inline unsigned
lpfc_cmd_blksize(struct scsi_cmnd *sc)
{
        return sc->device->sector_size;
}

/**
 * lpfc_get_cmd_dif_parms - Extract DIF parameters from SCSI command
 * @sc:             in: SCSI command
 * @apptagmask:     out: app tag mask
 * @apptagval:      out: app tag value
 * @reftag:         out: ref tag (reference tag)
 *
 * Description:
 *   Extract DIF parameters from the command if possible.  Otherwise,
 *   use default parameters.
 *
 **/
static inline void
lpfc_get_cmd_dif_parms(struct scsi_cmnd *sc, uint16_t *apptagmask,
                uint16_t *apptagval, uint32_t *reftag)
{
        struct  scsi_dif_tuple *spt;
        unsigned char op = scsi_get_prot_op(sc);
        unsigned int protcnt = scsi_prot_sg_count(sc);
        static int cnt;

        if (protcnt && (op == SCSI_PROT_WRITE_STRIP ||
                                op == SCSI_PROT_WRITE_PASS ||
                                op == SCSI_PROT_WRITE_CONVERT)) {

                cnt++;
                spt = page_address(sg_page(scsi_prot_sglist(sc))) +
                        scsi_prot_sglist(sc)[0].offset;
                *apptagmask = 0;
                *apptagval = 0;
                *reftag = cpu_to_be32(spt->ref_tag);

        } else {
                /* SBC defines ref tag to be lower 32bits of LBA */
                *reftag = (uint32_t) (0xffffffff & scsi_get_lba(sc));
                *apptagmask = 0;
                *apptagval = 0;
        }
}

/*
 * This function sets up buffer list for protection groups of
 * type LPFC_PG_TYPE_NO_DIF
 *
 * This is usually used when the HBA is instructed to generate
 * DIFs and insert them into data stream (or strip DIF from
 * incoming data stream)
 *
 * The buffer list consists of just one protection group described
 * below:
 *                                +-------------------------+
 *   start of prot group  -->     |          PDE_1          |
 *                                +-------------------------+
 *                                |         Data BDE        |
 *                                +-------------------------+
 *                                |more Data BDE's ... (opt)|
 *                                +-------------------------+
 *
 * @sc: pointer to scsi command we're working on
 * @bpl: pointer to buffer list for protection groups
 * @datacnt: number of segments of data that have been dma mapped
 *
 * Note: Data s/g buffers have been dma mapped
 */
static int
lpfc_bg_setup_bpl(struct lpfc_hba *phba, struct scsi_cmnd *sc,
                struct ulp_bde64 *bpl, int datasegcnt)
{
        struct scatterlist *sgde = NULL; /* s/g data entry */
        struct lpfc_pde *pde1 = NULL;
        dma_addr_t physaddr;
        int i = 0, num_bde = 0;
        int datadir = sc->sc_data_direction;
        int prof = LPFC_PROF_INVALID;
        unsigned blksize;
        uint32_t reftag;
        uint16_t apptagmask, apptagval;

        pde1 = (struct lpfc_pde *) bpl;
        prof = lpfc_sc_to_sli_prof(sc);

        if (prof == LPFC_PROF_INVALID)
                goto out;

        /* extract some info from the scsi command for PDE1*/
        blksize = lpfc_cmd_blksize(sc);
        lpfc_get_cmd_dif_parms(sc, &apptagmask, &apptagval, &reftag);

        /* setup PDE1 with what we have */
        lpfc_pde_set_bg_parms(pde1, LPFC_PDE1_DESCRIPTOR, prof, blksize,
                        BG_EC_STOP_ERR);
        lpfc_pde_set_dif_parms(pde1, apptagmask, apptagval, reftag);

        num_bde++;
        bpl++;

        /* assumption: caller has already run dma_map_sg on command data */
        scsi_for_each_sg(sc, sgde, datasegcnt, i) {
                physaddr = sg_dma_address(sgde);
                bpl->addrLow = le32_to_cpu(putPaddrLow(physaddr));
                bpl->addrHigh = le32_to_cpu(putPaddrHigh(physaddr));
                bpl->tus.f.bdeSize = sg_dma_len(sgde);
                if (datadir == DMA_TO_DEVICE)
                        bpl->tus.f.bdeFlags = BUFF_TYPE_BDE_64;
                else
                        bpl->tus.f.bdeFlags = BUFF_TYPE_BDE_64I;
                bpl->tus.w = le32_to_cpu(bpl->tus.w);
                bpl++;
                num_bde++;
        }

out:
        return num_bde;
}

/*
 * This function sets up buffer list for protection groups of
 * type LPFC_PG_TYPE_DIF_BUF
 *
 * This is usually used when DIFs are in their own buffers,
 * separate from the data. The HBA can then by instructed
 * to place the DIFs in the outgoing stream.  For read operations,
 * The HBA could extract the DIFs and place it in DIF buffers.
 *
 * The buffer list for this type consists of one or more of the
 * protection groups described below:
 *                                    +-------------------------+
 *   start of first prot group  -->   |          PDE_1          |
 *                                    +-------------------------+
 *                                    |      PDE_3 (Prot BDE)   |
 *                                    +-------------------------+
 *                                    |        Data BDE         |
 *                                    +-------------------------+
 *                                    |more Data BDE's ... (opt)|
 *                                    +-------------------------+
 *   start of new  prot group  -->    |          PDE_1          |
 *                                    +-------------------------+
 *                                    |          ...            |
 *                                    +-------------------------+
 *
 * @sc: pointer to scsi command we're working on
 * @bpl: pointer to buffer list for protection groups
 * @datacnt: number of segments of data that have been dma mapped
 * @protcnt: number of segment of protection data that have been dma mapped
 *
 * Note: It is assumed that both data and protection s/g buffers have been
 *       mapped for DMA
 */
static int
lpfc_bg_setup_bpl_prot(struct lpfc_hba *phba, struct scsi_cmnd *sc,
                struct ulp_bde64 *bpl, int datacnt, int protcnt)
{
        struct scatterlist *sgde = NULL; /* s/g data entry */
        struct scatterlist *sgpe = NULL; /* s/g prot entry */
        struct lpfc_pde *pde1 = NULL;
        struct ulp_bde64 *prot_bde = NULL;
        dma_addr_t dataphysaddr, protphysaddr;
        unsigned short curr_data = 0, curr_prot = 0;
        unsigned int split_offset, protgroup_len;
        unsigned int protgrp_blks, protgrp_bytes;
        unsigned int remainder, subtotal;
        int prof = LPFC_PROF_INVALID;
        int datadir = sc->sc_data_direction;
        unsigned char pgdone = 0, alldone = 0;
        unsigned blksize;
        uint32_t reftag;
        uint16_t apptagmask, apptagval;
        int num_bde = 0;

        sgpe = scsi_prot_sglist(sc);
        sgde = scsi_sglist(sc);

        if (!sgpe || !sgde) {
                lpfc_printf_log(phba, KERN_ERR, LOG_FCP,
                                "9020 Invalid s/g entry: data=0x%p prot=0x%p\n",
                                sgpe, sgde);
                return 0;
        }

        prof = lpfc_sc_to_sli_prof(sc);
        if (prof == LPFC_PROF_INVALID)
                goto out;

        /* extract some info from the scsi command for PDE1*/
        blksize = lpfc_cmd_blksize(sc);
        lpfc_get_cmd_dif_parms(sc, &apptagmask, &apptagval, &reftag);

        split_offset = 0;
        do {
                /* setup the first PDE_1 */
                pde1 = (struct lpfc_pde *) bpl;

                lpfc_pde_set_bg_parms(pde1, LPFC_PDE1_DESCRIPTOR, prof, blksize,
                                BG_EC_STOP_ERR);
                lpfc_pde_set_dif_parms(pde1, apptagmask, apptagval, reftag);

                num_bde++;
                bpl++;

                /* setup the first BDE that points to protection buffer */
                prot_bde = (struct ulp_bde64 *) bpl;
                protphysaddr = sg_dma_address(sgpe);
                prot_bde->addrLow = le32_to_cpu(putPaddrLow(protphysaddr));
                prot_bde->addrHigh = le32_to_cpu(putPaddrHigh(protphysaddr));
                protgroup_len = sg_dma_len(sgpe);


                /* must be integer multiple of the DIF block length */
                BUG_ON(protgroup_len % 8);

                protgrp_blks = protgroup_len / 8;
                protgrp_bytes = protgrp_blks * blksize;

                prot_bde->tus.f.bdeSize = protgroup_len;
                if (datadir == DMA_TO_DEVICE)
                        prot_bde->tus.f.bdeFlags = BUFF_TYPE_BDE_64;
                else
                        prot_bde->tus.f.bdeFlags = BUFF_TYPE_BDE_64I;
                prot_bde->tus.w = le32_to_cpu(bpl->tus.w);

                curr_prot++;
                num_bde++;

                /* setup BDE's for data blocks associated with DIF data */
                pgdone = 0;
                subtotal = 0; /* total bytes processed for current prot grp */
                while (!pgdone) {
                        if (!sgde) {
                                printk(KERN_ERR "%s Invalid data segment\n",
                                                __func__);
                                return 0;
                        }
                        bpl++;
                        dataphysaddr = sg_dma_address(sgde) + split_offset;
                        bpl->addrLow = le32_to_cpu(putPaddrLow(dataphysaddr));
                        bpl->addrHigh = le32_to_cpu(putPaddrHigh(dataphysaddr));

                        remainder = sg_dma_len(sgde) - split_offset;

                        if ((subtotal + remainder) <= protgrp_bytes) {
                                /* we can use this whole buffer */
                                bpl->tus.f.bdeSize = remainder;
                                split_offset = 0;

                                if ((subtotal + remainder) == protgrp_bytes)
                                        pgdone = 1;
                        } else {
                                /* must split this buffer with next prot grp */
                                bpl->tus.f.bdeSize = protgrp_bytes - subtotal;
                                split_offset += bpl->tus.f.bdeSize;
                        }

                        subtotal += bpl->tus.f.bdeSize;

                        if (datadir == DMA_TO_DEVICE)
                                bpl->tus.f.bdeFlags = BUFF_TYPE_BDE_64;
                        else
                                bpl->tus.f.bdeFlags = BUFF_TYPE_BDE_64I;
                        bpl->tus.w = le32_to_cpu(bpl->tus.w);

                        num_bde++;
                        curr_data++;

                        if (split_offset)
                                break;

                        /* Move to the next s/g segment if possible */
                        sgde = sg_next(sgde);
                }

                /* are we done ? */
                if (curr_prot == protcnt) {
                        alldone = 1;
                } else if (curr_prot < protcnt) {
                        /* advance to next prot buffer */
                        sgpe = sg_next(sgpe);
                        bpl++;

                        /* update the reference tag */
                        reftag += protgrp_blks;
                } else {
                        /* if we're here, we have a bug */
                        printk(KERN_ERR "BLKGRD: bug in %s\n", __func__);
                }

        } while (!alldone);

out:


        return num_bde;
}
/*
 * Given a SCSI command that supports DIF, determine composition of protection
 * groups involved in setting up buffer lists
 *
 * Returns:
 *                            for DIF (for both read and write)
 * */
static int
lpfc_prot_group_type(struct lpfc_hba *phba, struct scsi_cmnd *sc)
{
        int ret = LPFC_PG_TYPE_INVALID;
        unsigned char op = scsi_get_prot_op(sc);

        switch (op) {
        case SCSI_PROT_READ_STRIP:
        case SCSI_PROT_WRITE_INSERT:
                ret = LPFC_PG_TYPE_NO_DIF;
                break;
        case SCSI_PROT_READ_INSERT:
        case SCSI_PROT_WRITE_STRIP:
        case SCSI_PROT_READ_PASS:
        case SCSI_PROT_WRITE_PASS:
        case SCSI_PROT_WRITE_CONVERT:
        case SCSI_PROT_READ_CONVERT:
                ret = LPFC_PG_TYPE_DIF_BUF;
                break;
        default:
                lpfc_printf_log(phba, KERN_ERR, LOG_FCP,
                                "9021 Unsupported protection op:%d\n", op);
                break;
        }

        return ret;
}

/*
 * This is the protection/DIF aware version of
 * lpfc_scsi_prep_dma_buf(). It may be a good idea to combine the
 * two functions eventually, but for now, it's here
 */
static int
lpfc_bg_scsi_prep_dma_buf(struct lpfc_hba *phba,
                struct lpfc_scsi_buf *lpfc_cmd)
{
        struct scsi_cmnd *scsi_cmnd = lpfc_cmd->pCmd;
        struct fcp_cmnd *fcp_cmnd = lpfc_cmd->fcp_cmnd;
        struct ulp_bde64 *bpl = lpfc_cmd->fcp_bpl;
        IOCB_t *iocb_cmd = &lpfc_cmd->cur_iocbq.iocb;
        uint32_t num_bde = 0;
        int datasegcnt, protsegcnt, datadir = scsi_cmnd->sc_data_direction;
        int prot_group_type = 0;
        int diflen, fcpdl;
        unsigned blksize;

        /*
         * Start the lpfc command prep by bumping the bpl beyond fcp_cmnd
         *  fcp_rsp regions to the first data bde entry
         */
        bpl += 2;
        if (scsi_sg_count(scsi_cmnd)) {
                /*
                 * The driver stores the segment count returned from pci_map_sg
                 * because this a count of dma-mappings used to map the use_sg
                 * pages.  They are not guaranteed to be the same for those
                 * architectures that implement an IOMMU.
                 */
                datasegcnt = dma_map_sg(&phba->pcidev->dev,
                                        scsi_sglist(scsi_cmnd),
                                        scsi_sg_count(scsi_cmnd), datadir);
                if (unlikely(!datasegcnt))
                        return 1;

                lpfc_cmd->seg_cnt = datasegcnt;
                if (lpfc_cmd->seg_cnt > phba->cfg_sg_seg_cnt) {
                        printk(KERN_ERR "%s: Too many sg segments from "
                                        "dma_map_sg.  Config %d, seg_cnt %d\n",
                                        __func__, phba->cfg_sg_seg_cnt,
                                        lpfc_cmd->seg_cnt);
                        scsi_dma_unmap(scsi_cmnd);
                        return 1;
                }

                prot_group_type = lpfc_prot_group_type(phba, scsi_cmnd);

                switch (prot_group_type) {
                case LPFC_PG_TYPE_NO_DIF:
                        num_bde = lpfc_bg_setup_bpl(phba, scsi_cmnd, bpl,
                                        datasegcnt);
                        /* we shoud have 2 or more entries in buffer list */
                        if (num_bde < 2)
                                goto err;
                        break;
                case LPFC_PG_TYPE_DIF_BUF:{
                        /*
                         * This type indicates that protection buffers are
                         * passed to the driver, so that needs to be prepared
                         * for DMA
                         */
                        protsegcnt = dma_map_sg(&phba->pcidev->dev,
                                        scsi_prot_sglist(scsi_cmnd),
                                        scsi_prot_sg_count(scsi_cmnd), datadir);
                        if (unlikely(!protsegcnt)) {
                                scsi_dma_unmap(scsi_cmnd);
                                return 1;
                        }

                        lpfc_cmd->prot_seg_cnt = protsegcnt;
                        if (lpfc_cmd->prot_seg_cnt
                            > phba->cfg_prot_sg_seg_cnt) {
                                printk(KERN_ERR "%s: Too many prot sg segments "
                                                "from dma_map_sg.  Config %d,"
                                                "prot_seg_cnt %d\n", __func__,
                                                phba->cfg_prot_sg_seg_cnt,
                                                lpfc_cmd->prot_seg_cnt);
                                dma_unmap_sg(&phba->pcidev->dev,
                                             scsi_prot_sglist(scsi_cmnd),
                                             scsi_prot_sg_count(scsi_cmnd),
                                             datadir);
                                scsi_dma_unmap(scsi_cmnd);
                                return 1;
                        }

                        num_bde = lpfc_bg_setup_bpl_prot(phba, scsi_cmnd, bpl,
                                        datasegcnt, protsegcnt);
                        /* we shoud have 3 or more entries in buffer list */
                        if (num_bde < 3)
                                goto err;
                        break;
                }
                case LPFC_PG_TYPE_INVALID:
                default:
                        lpfc_printf_log(phba, KERN_ERR, LOG_FCP,
                                        "9022 Unexpected protection group %i\n",
                                        prot_group_type);
                        return 1;
                }
        }

        /*
         * Finish initializing those IOCB fields that are dependent on the
         * scsi_cmnd request_buffer.  Note that the bdeSize is explicitly
         * reinitialized since all iocb memory resources are used many times
         * for transmit, receive, and continuation bpl's.
         */
        iocb_cmd->un.fcpi64.bdl.bdeSize = (2 * sizeof(struct ulp_bde64));
        iocb_cmd->un.fcpi64.bdl.bdeSize += (num_bde * sizeof(struct ulp_bde64));
        iocb_cmd->ulpBdeCount = 1;
        iocb_cmd->ulpLe = 1;

        fcpdl = scsi_bufflen(scsi_cmnd);

        if (scsi_get_prot_type(scsi_cmnd) == SCSI_PROT_DIF_TYPE1) {
                /*
                 * We are in DIF Type 1 mode
                 * Every data block has a 8 byte DIF (trailer)
                 * attached to it.  Must ajust FCP data length
                 */
                blksize = lpfc_cmd_blksize(scsi_cmnd);
                diflen = (fcpdl / blksize) * 8;
                fcpdl += diflen;
        }
        fcp_cmnd->fcpDl = be32_to_cpu(fcpdl);

        /*
         * Due to difference in data length between DIF/non-DIF paths,
         * we need to set word 4 of IOCB here
         */
        iocb_cmd->un.fcpi.fcpi_parm = fcpdl;

        return 0;
err:
        lpfc_printf_log(phba, KERN_ERR, LOG_FCP,
                        "9023 Could not setup all needed BDE's"
                        "prot_group_type=%d, num_bde=%d\n",
                        prot_group_type, num_bde);
        return 1;
}

/*
 * This function checks for BlockGuard errors detected by
 * the HBA.  In case of errors, the ASC/ASCQ fields in the
 * sense buffer will be set accordingly, paired with
 * ILLEGAL_REQUEST to signal to the kernel that the HBA
 * detected corruption.
 *
 * Returns:
 *  0 - No error found
 *  1 - BlockGuard error found
 * -1 - Internal error (bad profile, ...etc)
 */
static int
lpfc_parse_bg_err(struct lpfc_hba *phba, struct lpfc_scsi_buf *lpfc_cmd,
                        struct lpfc_iocbq *pIocbOut)
{
        struct scsi_cmnd *cmd = lpfc_cmd->pCmd;
        struct sli3_bg_fields *bgf = &pIocbOut->iocb.unsli3.sli3_bg;
        int ret = 0;
        uint32_t bghm = bgf->bghm;
        uint32_t bgstat = bgf->bgstat;
        uint64_t failing_sector = 0;

        printk(KERN_ERR "BG ERROR in cmd 0x%x lba 0x%llx blk cnt 0x%x "
                        "bgstat=0x%x bghm=0x%x\n",
                        cmd->cmnd[0], (unsigned long long)scsi_get_lba(cmd),
                        blk_rq_sectors(cmd->request), bgstat, bghm);

        spin_lock(&_dump_buf_lock);
        if (!_dump_buf_done) {
                printk(KERN_ERR "Saving Data for %u blocks to debugfs\n",
                                (cmd->cmnd[7] << 8 | cmd->cmnd[8]));
                lpfc_debug_save_data(cmd);

                /* If we have a prot sgl, save the DIF buffer */
                if (lpfc_prot_group_type(phba, cmd) ==
                                LPFC_PG_TYPE_DIF_BUF) {
                        printk(KERN_ERR "Saving DIF for %u blocks to debugfs\n",
                                        (cmd->cmnd[7] << 8 | cmd->cmnd[8]));
                        lpfc_debug_save_dif(cmd);
                }

                _dump_buf_done = 1;
        }
        spin_unlock(&_dump_buf_lock);

        if (lpfc_bgs_get_invalid_prof(bgstat)) {
                cmd->result = ScsiResult(DID_ERROR, 0);
                printk(KERN_ERR "Invalid BlockGuard profile. bgstat:0x%x\n",
                                bgstat);
                ret = (-1);
                goto out;
        }

        if (lpfc_bgs_get_uninit_dif_block(bgstat)) {
                cmd->result = ScsiResult(DID_ERROR, 0);
                printk(KERN_ERR "Invalid BlockGuard DIF Block. bgstat:0x%x\n",
                                bgstat);
                ret = (-1);
                goto out;
        }

        if (lpfc_bgs_get_guard_err(bgstat)) {
                ret = 1;

                scsi_build_sense_buffer(1, cmd->sense_buffer, ILLEGAL_REQUEST,
                                0x10, 0x1);
                cmd->result = DRIVER_SENSE << 24
                        | ScsiResult(DID_ABORT, SAM_STAT_CHECK_CONDITION);
                phba->bg_guard_err_cnt++;
                printk(KERN_ERR "BLKGRD: guard_tag error\n");
        }

        if (lpfc_bgs_get_reftag_err(bgstat)) {
                ret = 1;

                scsi_build_sense_buffer(1, cmd->sense_buffer, ILLEGAL_REQUEST,
                                0x10, 0x3);
                cmd->result = DRIVER_SENSE << 24
                        | ScsiResult(DID_ABORT, SAM_STAT_CHECK_CONDITION);

                phba->bg_reftag_err_cnt++;
                printk(KERN_ERR "BLKGRD: ref_tag error\n");
        }

        if (lpfc_bgs_get_apptag_err(bgstat)) {
                ret = 1;

                scsi_build_sense_buffer(1, cmd->sense_buffer, ILLEGAL_REQUEST,
                                0x10, 0x2);
                cmd->result = DRIVER_SENSE << 24
                        | ScsiResult(DID_ABORT, SAM_STAT_CHECK_CONDITION);

                phba->bg_apptag_err_cnt++;
                printk(KERN_ERR "BLKGRD: app_tag error\n");
        }

        if (lpfc_bgs_get_hi_water_mark_present(bgstat)) {
                /*
                 * setup sense data descriptor 0 per SPC-4 as an information
                 * field, and put the failing LBA in it
                 */
                cmd->sense_buffer[8] = 0;     /* Information */
                cmd->sense_buffer[9] = 0xa;   /* Add. length */
                bghm /= cmd->device->sector_size;

                failing_sector = scsi_get_lba(cmd);
                failing_sector += bghm;

                put_unaligned_be64(failing_sector, &cmd->sense_buffer[10]);
        }

        if (!ret) {
                /* No error was reported - problem in FW? */
                cmd->result = ScsiResult(DID_ERROR, 0);
                printk(KERN_ERR "BLKGRD: no errors reported!\n");
        }

out:
        return ret;
}

/**
 * lpfc_scsi_prep_dma_buf_s4 - DMA mapping for scsi buffer to SLI4 IF spec
 * @phba: The Hba for which this call is being executed.
 * @lpfc_cmd: The scsi buffer which is going to be mapped.
 *
 * This routine does the pci dma mapping for scatter-gather list of scsi cmnd
 * field of @lpfc_cmd for device with SLI-4 interface spec.
 *
 * Return codes:
 *      1 - Error
 *      0 - Success
 **/
static int
lpfc_scsi_prep_dma_buf_s4(struct lpfc_hba *phba, struct lpfc_scsi_buf *lpfc_cmd)
{
        struct scsi_cmnd *scsi_cmnd = lpfc_cmd->pCmd;
        struct scatterlist *sgel = NULL;
        struct fcp_cmnd *fcp_cmnd = lpfc_cmd->fcp_cmnd;
        struct sli4_sge *sgl = (struct sli4_sge *)lpfc_cmd->fcp_bpl;
        IOCB_t *iocb_cmd = &lpfc_cmd->cur_iocbq.iocb;
        dma_addr_t physaddr;
        uint32_t num_bde = 0;
        uint32_t dma_len;
        uint32_t dma_offset = 0;
        int nseg;

        /*
         * There are three possibilities here - use scatter-gather segment, use
         * the single mapping, or neither.  Start the lpfc command prep by
         * bumping the bpl beyond the fcp_cmnd and fcp_rsp regions to the first
         * data bde entry.
         */
        if (scsi_sg_count(scsi_cmnd)) {
                /*
                 * The driver stores the segment count returned from pci_map_sg
                 * because this a count of dma-mappings used to map the use_sg
                 * pages.  They are not guaranteed to be the same for those
                 * architectures that implement an IOMMU.
                 */

                nseg = scsi_dma_map(scsi_cmnd);
                if (unlikely(!nseg))
                        return 1;
                sgl += 1;
                /* clear the last flag in the fcp_rsp map entry */
                sgl->word2 = le32_to_cpu(sgl->word2);
                bf_set(lpfc_sli4_sge_last, sgl, 0);
                sgl->word2 = cpu_to_le32(sgl->word2);
                sgl += 1;

                lpfc_cmd->seg_cnt = nseg;
                if (lpfc_cmd->seg_cnt > phba->cfg_sg_seg_cnt) {
                        printk(KERN_ERR "%s: Too many sg segments from "
                               "dma_map_sg.  Config %d, seg_cnt %d\n",
                               __func__, phba->cfg_sg_seg_cnt,
                               lpfc_cmd->seg_cnt);
                        scsi_dma_unmap(scsi_cmnd);
                        return 1;
                }

                /*
                 * The driver established a maximum scatter-gather segment count
                 * during probe that limits the number of sg elements in any
                 * single scsi command.  Just run through the seg_cnt and format
                 * the sge's.
                 * When using SLI-3 the driver will try to fit all the BDEs into
                 * the IOCB. If it can't then the BDEs get added to a BPL as it
                 * does for SLI-2 mode.
                 */
                scsi_for_each_sg(scsi_cmnd, sgel, nseg, num_bde) {
                        physaddr = sg_dma_address(sgel);
                        dma_len = sg_dma_len(sgel);
                        bf_set(lpfc_sli4_sge_len, sgl, sg_dma_len(sgel));
                        sgl->addr_lo = cpu_to_le32(putPaddrLow(physaddr));
                        sgl->addr_hi = cpu_to_le32(putPaddrHigh(physaddr));
                        if ((num_bde + 1) == nseg)
                                bf_set(lpfc_sli4_sge_last, sgl, 1);
                        else
                                bf_set(lpfc_sli4_sge_last, sgl, 0);
                        bf_set(lpfc_sli4_sge_offset, sgl, dma_offset);
                        sgl->word2 = cpu_to_le32(sgl->word2);
                        sgl->word3 = cpu_to_le32(sgl->word3);
                        dma_offset += dma_len;
                        sgl++;
                }
        } else {
                sgl += 1;
                /* clear the last flag in the fcp_rsp map entry */
                sgl->word2 = le32_to_cpu(sgl->word2);
                bf_set(lpfc_sli4_sge_last, sgl, 1);
                sgl->word2 = cpu_to_le32(sgl->word2);
        }

        /*
         * Finish initializing those IOCB fields that are dependent on the
         * scsi_cmnd request_buffer.  Note that for SLI-2 the bdeSize is
         * explicitly reinitialized.
         * all iocb memory resources are reused.
         */
        fcp_cmnd->fcpDl = cpu_to_be32(scsi_bufflen(scsi_cmnd));

        /*
         * Due to difference in data length between DIF/non-DIF paths,
         * we need to set word 4 of IOCB here
         */
        iocb_cmd->un.fcpi.fcpi_parm = scsi_bufflen(scsi_cmnd);
        return 0;
}

/**
 * lpfc_scsi_prep_dma_buf - Wrapper function for DMA mapping of scsi buffer
 * @phba: The Hba for which this call is being executed.
 * @lpfc_cmd: The scsi buffer which is going to be mapped.
 *
 * This routine wraps the actual DMA mapping function pointer from the
 * lpfc_hba struct.
 *
 * Return codes:
 *      1 - Error
 *      0 - Success
 **/
static inline int
lpfc_scsi_prep_dma_buf(struct lpfc_hba *phba, struct lpfc_scsi_buf *lpfc_cmd)
{
        return phba->lpfc_scsi_prep_dma_buf(phba, lpfc_cmd);
}

/**
 * lpfc_send_scsi_error_event - Posts an event when there is SCSI error
 * @phba: Pointer to hba context object.
 * @vport: Pointer to vport object.
 * @lpfc_cmd: Pointer to lpfc scsi command which reported the error.
 * @rsp_iocb: Pointer to response iocb object which reported error.
 *
 * This function posts an event when there is a SCSI command reporting
 * error from the scsi device.
 **/
static void
lpfc_send_scsi_error_event(struct lpfc_hba *phba, struct lpfc_vport *vport,
                struct lpfc_scsi_buf *lpfc_cmd, struct lpfc_iocbq *rsp_iocb) {
        struct scsi_cmnd *cmnd = lpfc_cmd->pCmd;
        struct fcp_rsp *fcprsp = lpfc_cmd->fcp_rsp;
        uint32_t resp_info = fcprsp->rspStatus2;
        uint32_t scsi_status = fcprsp->rspStatus3;
        uint32_t fcpi_parm = rsp_iocb->iocb.un.fcpi.fcpi_parm;
        struct lpfc_fast_path_event *fast_path_evt = NULL;
        struct lpfc_nodelist *pnode = lpfc_cmd->rdata->pnode;
        unsigned long flags;

        /* If there is queuefull or busy condition send a scsi event */
        if ((cmnd->result == SAM_STAT_TASK_SET_FULL) ||
                (cmnd->result == SAM_STAT_BUSY)) {
                fast_path_evt = lpfc_alloc_fast_evt(phba);
                if (!fast_path_evt)
                        return;
                fast_path_evt->un.scsi_evt.event_type =
                        FC_REG_SCSI_EVENT;
                fast_path_evt->un.scsi_evt.subcategory =
                (cmnd->result == SAM_STAT_TASK_SET_FULL) ?
                LPFC_EVENT_QFULL : LPFC_EVENT_DEVBSY;
                fast_path_evt->un.scsi_evt.lun = cmnd->device->lun;
                memcpy(&fast_path_evt->un.scsi_evt.wwpn,
                        &pnode->nlp_portname, sizeof(struct lpfc_name));
                memcpy(&fast_path_evt->un.scsi_evt.wwnn,
                        &pnode->nlp_nodename, sizeof(struct lpfc_name));
        } else if ((resp_info & SNS_LEN_VALID) && fcprsp->rspSnsLen &&
                ((cmnd->cmnd[0] == READ_10) || (cmnd->cmnd[0] == WRITE_10))) {
                fast_path_evt = lpfc_alloc_fast_evt(phba);
                if (!fast_path_evt)
                        return;
                fast_path_evt->un.check_cond_evt.scsi_event.event_type =
                        FC_REG_SCSI_EVENT;
                fast_path_evt->un.check_cond_evt.scsi_event.subcategory =
                        LPFC_EVENT_CHECK_COND;
                fast_path_evt->un.check_cond_evt.scsi_event.lun =
                        cmnd->device->lun;
                memcpy(&fast_path_evt->un.check_cond_evt.scsi_event.wwpn,
                        &pnode->nlp_portname, sizeof(struct lpfc_name));
                memcpy(&fast_path_evt->un.check_cond_evt.scsi_event.wwnn,
                        &pnode->nlp_nodename, sizeof(struct lpfc_name));
                fast_path_evt->un.check_cond_evt.sense_key =
                        cmnd->sense_buffer[2] & 0xf;
                fast_path_evt->un.check_cond_evt.asc = cmnd->sense_buffer[12];
                fast_path_evt->un.check_cond_evt.ascq = cmnd->sense_buffer[13];
        } else if ((cmnd->sc_data_direction == DMA_FROM_DEVICE) &&
                     fcpi_parm &&
                     ((be32_to_cpu(fcprsp->rspResId) != fcpi_parm) ||
                        ((scsi_status == SAM_STAT_GOOD) &&
                        !(resp_info & (RESID_UNDER | RESID_OVER))))) {
                /*
                 * If status is good or resid does not match with fcp_param and
                 * there is valid fcpi_parm, then there is a read_check error
                 */
                fast_path_evt = lpfc_alloc_fast_evt(phba);
                if (!fast_path_evt)
                        return;
                fast_path_evt->un.read_check_error.header.event_type =
                        FC_REG_FABRIC_EVENT;
                fast_path_evt->un.read_check_error.header.subcategory =
                        LPFC_EVENT_FCPRDCHKERR;
                memcpy(&fast_path_evt->un.read_check_error.header.wwpn,
                        &pnode->nlp_portname, sizeof(struct lpfc_name));
                memcpy(&fast_path_evt->un.read_check_error.header.wwnn,
                        &pnode->nlp_nodename, sizeof(struct lpfc_name));
                fast_path_evt->un.read_check_error.lun = cmnd->device->lun;
                fast_path_evt->un.read_check_error.opcode = cmnd->cmnd[0];
                fast_path_evt->un.read_check_error.fcpiparam =
                        fcpi_parm;
        } else
                return;

        fast_path_evt->vport = vport;
        spin_lock_irqsave(&phba->hbalock, flags);
        list_add_tail(&fast_path_evt->work_evt.evt_listp, &phba->work_list);
        spin_unlock_irqrestore(&phba->hbalock, flags);
        lpfc_worker_wake_up(phba);
        return;
}

/**
 * lpfc_scsi_unprep_dma_buf - Un-map DMA mapping of SG-list for dev
 * @phba: The HBA for which this call is being executed.
 * @psb: The scsi buffer which is going to be un-mapped.
 *
 * This routine does DMA un-mapping of scatter gather list of scsi command
 * field of @lpfc_cmd for device with SLI-3 interface spec.
 **/
static void
lpfc_scsi_unprep_dma_buf(struct lpfc_hba *phba, struct lpfc_scsi_buf *psb)
{
        /*
         * There are only two special cases to consider.  (1) the scsi command
         * requested scatter-gather usage or (2) the scsi command allocated
         * a request buffer, but did not request use_sg.  There is a third
         * case, but it does not require resource deallocation.
         */
        if (psb->seg_cnt > 0)
                scsi_dma_unmap(psb->pCmd);
        if (psb->prot_seg_cnt > 0)
                dma_unmap_sg(&phba->pcidev->dev, scsi_prot_sglist(psb->pCmd),
                                scsi_prot_sg_count(psb->pCmd),
                                psb->pCmd->sc_data_direction);
}

/**
 * lpfc_handler_fcp_err - FCP response handler
 * @vport: The virtual port for which this call is being executed.
 * @lpfc_cmd: Pointer to lpfc_scsi_buf data structure.
 * @rsp_iocb: The response IOCB which contains FCP error.
 *
 * This routine is called to process response IOCB with status field
 * IOSTAT_FCP_RSP_ERROR. This routine sets result field of scsi command
 * based upon SCSI and FCP error.
 **/
static void
lpfc_handle_fcp_err(struct lpfc_vport *vport, struct lpfc_scsi_buf *lpfc_cmd,
                    struct lpfc_iocbq *rsp_iocb)
{
        struct scsi_cmnd *cmnd = lpfc_cmd->pCmd;
        struct fcp_cmnd *fcpcmd = lpfc_cmd->fcp_cmnd;
        struct fcp_rsp *fcprsp = lpfc_cmd->fcp_rsp;
        uint32_t fcpi_parm = rsp_iocb->iocb.un.fcpi.fcpi_parm;
        uint32_t resp_info = fcprsp->rspStatus2;
        uint32_t scsi_status = fcprsp->rspStatus3;
        uint32_t *lp;
        uint32_t host_status = DID_OK;
        uint32_t rsplen = 0;
        uint32_t logit = LOG_FCP | LOG_FCP_ERROR;


        /*
         *  If this is a task management command, there is no
         *  scsi packet associated with this lpfc_cmd.  The driver
         *  consumes it.
         */
        if (fcpcmd->fcpCntl2) {
                scsi_status = 0;
                goto out;
        }

        if ((resp_info & SNS_LEN_VALID) && fcprsp->rspSnsLen) {
                uint32_t snslen = be32_to_cpu(fcprsp->rspSnsLen);
                if (snslen > SCSI_SENSE_BUFFERSIZE)
                        snslen = SCSI_SENSE_BUFFERSIZE;

                if (resp_info & RSP_LEN_VALID)
                  rsplen = be32_to_cpu(fcprsp->rspRspLen);
                memcpy(cmnd->sense_buffer, &fcprsp->rspInfo0 + rsplen, snslen);
        }
        lp = (uint32_t *)cmnd->sense_buffer;

        if (!scsi_status && (resp_info & RESID_UNDER))
                logit = LOG_FCP;

        lpfc_printf_vlog(vport, KERN_WARNING, logit,
                         "9024 FCP command x%x failed: x%x SNS x%x x%x "
                         "Data: x%x x%x x%x x%x x%x\n",
                         cmnd->cmnd[0], scsi_status,
                         be32_to_cpu(*lp), be32_to_cpu(*(lp + 3)), resp_info,
                         be32_to_cpu(fcprsp->rspResId),
                         be32_to_cpu(fcprsp->rspSnsLen),
                         be32_to_cpu(fcprsp->rspRspLen),
                         fcprsp->rspInfo3);

        if (resp_info & RSP_LEN_VALID) {
                rsplen = be32_to_cpu(fcprsp->rspRspLen);
                if ((rsplen != 0 && rsplen != 4 && rsplen != 8) ||
                    (fcprsp->rspInfo3 != RSP_NO_FAILURE)) {
                        host_status = DID_ERROR;
                        goto out;
                }
        }

        scsi_set_resid(cmnd, 0);
        if (resp_info & RESID_UNDER) {
                scsi_set_resid(cmnd, be32_to_cpu(fcprsp->rspResId));

                lpfc_printf_vlog(vport, KERN_INFO, LOG_FCP,
                                 "9025 FCP Read Underrun, expected %d, "
                                 "residual %d Data: x%x x%x x%x\n",
                                 be32_to_cpu(fcpcmd->fcpDl),
                                 scsi_get_resid(cmnd), fcpi_parm, cmnd->cmnd[0],
                                 cmnd->underflow);

                /*
                 * If there is an under run check if under run reported by
                 * storage array is same as the under run reported by HBA.
                 * If this is not same, there is a dropped frame.
                 */
                if ((cmnd->sc_data_direction == DMA_FROM_DEVICE) &&
                        fcpi_parm &&
                        (scsi_get_resid(cmnd) != fcpi_parm)) {
                        lpfc_printf_vlog(vport, KERN_WARNING,
                                         LOG_FCP | LOG_FCP_ERROR,
                                         "9026 FCP Read Check Error "
                                         "and Underrun Data: x%x x%x x%x x%x\n",
                                         be32_to_cpu(fcpcmd->fcpDl),
                                         scsi_get_resid(cmnd), fcpi_parm,
                                         cmnd->cmnd[0]);
                        scsi_set_resid(cmnd, scsi_bufflen(cmnd));
                        host_status = DID_ERROR;
                }
                /*
                 * The cmnd->underflow is the minimum number of bytes that must
                 * be transfered for this command.  Provided a sense condition
                 * is not present, make sure the actual amount transferred is at
                 * least the underflow value or fail.
                 */
                if (!(resp_info & SNS_LEN_VALID) &&
                    (scsi_status == SAM_STAT_GOOD) &&
                    (scsi_bufflen(cmnd) - scsi_get_resid(cmnd)
                     < cmnd->underflow)) {
                        lpfc_printf_vlog(vport, KERN_INFO, LOG_FCP,
                                         "9027 FCP command x%x residual "
                                         "underrun converted to error "
                                         "Data: x%x x%x x%x\n",
                                         cmnd->cmnd[0], scsi_bufflen(cmnd),
                                         scsi_get_resid(cmnd), cmnd->underflow);
                        host_status = DID_ERROR;
                }
        } else if (resp_info & RESID_OVER) {
                lpfc_printf_vlog(vport, KERN_WARNING, LOG_FCP,
                                 "9028 FCP command x%x residual overrun error. "
                                 "Data: x%x x%x \n", cmnd->cmnd[0],
                                 scsi_bufflen(cmnd), scsi_get_resid(cmnd));
                host_status = DID_ERROR;

        /*
         * Check SLI validation that all the transfer was actually done
         * (fcpi_parm should be zero). Apply check only to reads.
         */
        } else if ((scsi_status == SAM_STAT_GOOD) && fcpi_parm &&
                        (cmnd->sc_data_direction == DMA_FROM_DEVICE)) {
                lpfc_printf_vlog(vport, KERN_WARNING, LOG_FCP | LOG_FCP_ERROR,
                                 "9029 FCP Read Check Error Data: "
                                 "x%x x%x x%x x%x\n",
                                 be32_to_cpu(fcpcmd->fcpDl),
                                 be32_to_cpu(fcprsp->rspResId),
                                 fcpi_parm, cmnd->cmnd[0]);
                host_status = DID_ERROR;
                scsi_set_resid(cmnd, scsi_bufflen(cmnd));
        }

 out:
        cmnd->result = ScsiResult(host_status, scsi_status);
        lpfc_send_scsi_error_event(vport->phba, vport, lpfc_cmd, rsp_iocb);
}

/**
 * lpfc_scsi_cmd_iocb_cmpl - Scsi cmnd IOCB completion routine
 * @phba: The Hba for which this call is being executed.
 * @pIocbIn: The command IOCBQ for the scsi cmnd.
 * @pIocbOut: The response IOCBQ for the scsi cmnd.
 *
 * This routine assigns scsi command result by looking into response IOCB
 * status field appropriately. This routine handles QUEUE FULL condition as
 * well by ramping down device queue depth.
 **/
static void
lpfc_scsi_cmd_iocb_cmpl(struct lpfc_hba *phba, struct lpfc_iocbq *pIocbIn,
                        struct lpfc_iocbq *pIocbOut)
{
        struct lpfc_scsi_buf *lpfc_cmd =
                (struct lpfc_scsi_buf *) pIocbIn->context1;
        struct lpfc_vport      *vport = pIocbIn->vport;
        struct lpfc_rport_data *rdata = lpfc_cmd->rdata;
        struct lpfc_nodelist *pnode = rdata->pnode;
        struct scsi_cmnd *cmd = lpfc_cmd->pCmd;
        int result;
        struct scsi_device *tmp_sdev;
        int depth = 0;
        unsigned long flags;
        struct lpfc_fast_path_event *fast_path_evt;
        struct Scsi_Host *shost = cmd->device->host;
        uint32_t queue_depth, scsi_id;

        lpfc_cmd->result = pIocbOut->iocb.un.ulpWord[4];
        lpfc_cmd->status = pIocbOut->iocb.ulpStatus;
        if (pnode && NLP_CHK_NODE_ACT(pnode))
                atomic_dec(&pnode->cmd_pending);

        if (lpfc_cmd->status) {
                if (lpfc_cmd->status == IOSTAT_LOCAL_REJECT &&
                    (lpfc_cmd->result & IOERR_DRVR_MASK))
                        lpfc_cmd->status = IOSTAT_DRIVER_REJECT;
                else if (lpfc_cmd->status >= IOSTAT_CNT)
                        lpfc_cmd->status = IOSTAT_DEFAULT;

                lpfc_printf_vlog(vport, KERN_WARNING, LOG_FCP,
                                 "9030 FCP cmd x%x failed <%d/%d> "
                                 "status: x%x result: x%x Data: x%x x%x\n",
                                 cmd->cmnd[0],
                                 cmd->device ? cmd->device->id : 0xffff,
                                 cmd->device ? cmd->device->lun : 0xffff,
                                 lpfc_cmd->status, lpfc_cmd->result,
                                 pIocbOut->iocb.ulpContext,
                                 lpfc_cmd->cur_iocbq.iocb.ulpIoTag);

                switch (lpfc_cmd->status) {
                case IOSTAT_FCP_RSP_ERROR:
                        /* Call FCP RSP handler to determine result */
                        lpfc_handle_fcp_err(vport, lpfc_cmd, pIocbOut);
                        break;
                case IOSTAT_NPORT_BSY:
                case IOSTAT_FABRIC_BSY:
                        cmd->result = ScsiResult(DID_TRANSPORT_DISRUPTED, 0);
                        fast_path_evt = lpfc_alloc_fast_evt(phba);
                        if (!fast_path_evt)
                                break;
                        fast_path_evt->un.fabric_evt.event_type =
                                FC_REG_FABRIC_EVENT;
                        fast_path_evt->un.fabric_evt.subcategory =
                                (lpfc_cmd->status == IOSTAT_NPORT_BSY) ?
                                LPFC_EVENT_PORT_BUSY : LPFC_EVENT_FABRIC_BUSY;
                        if (pnode && NLP_CHK_NODE_ACT(pnode)) {
                                memcpy(&fast_path_evt->un.fabric_evt.wwpn,
                                        &pnode->nlp_portname,
                                        sizeof(struct lpfc_name));
                                memcpy(&fast_path_evt->un.fabric_evt.wwnn,
                                        &pnode->nlp_nodename,
                                        sizeof(struct lpfc_name));
                        }
                        fast_path_evt->vport = vport;
                        fast_path_evt->work_evt.evt =
                                LPFC_EVT_FASTPATH_MGMT_EVT;
                        spin_lock_irqsave(&phba->hbalock, flags);
                        list_add_tail(&fast_path_evt->work_evt.evt_listp,
                                &phba->work_list);
                        spin_unlock_irqrestore(&phba->hbalock, flags);
                        lpfc_worker_wake_up(phba);
                        break;
                case IOSTAT_LOCAL_REJECT:
                        if (lpfc_cmd->result == IOERR_INVALID_RPI ||
                            lpfc_cmd->result == IOERR_NO_RESOURCES ||
                            lpfc_cmd->result == IOERR_ABORT_REQUESTED) {
                                cmd->result = ScsiResult(DID_REQUEUE, 0);
                                break;
                        }

                        if ((lpfc_cmd->result == IOERR_RX_DMA_FAILED ||
                             lpfc_cmd->result == IOERR_TX_DMA_FAILED) &&
                             pIocbOut->iocb.unsli3.sli3_bg.bgstat) {
                                if (scsi_get_prot_op(cmd) != SCSI_PROT_NORMAL) {
                                        /*
                                         * This is a response for a BG enabled
                                         * cmd. Parse BG error
                                         */
                                        lpfc_parse_bg_err(phba, lpfc_cmd,
                                                        pIocbOut);
                                        break;
                                } else {
                                        lpfc_printf_vlog(vport, KERN_WARNING,
                                                        LOG_BG,
                                                        "9031 non-zero BGSTAT "
                                                        "on unprotected cmd");
                                }
                        }

                /* else: fall through */
                default:
                        cmd->result = ScsiResult(DID_ERROR, 0);
                        break;
                }

                if (!pnode || !NLP_CHK_NODE_ACT(pnode)
                    || (pnode->nlp_state != NLP_STE_MAPPED_NODE))
                        cmd->result = ScsiResult(DID_TRANSPORT_DISRUPTED,
                                                 SAM_STAT_BUSY);
        } else {
                cmd->result = ScsiResult(DID_OK, 0);
        }

        if (cmd->result || lpfc_cmd->fcp_rsp->rspSnsLen) {
                uint32_t *lp = (uint32_t *)cmd->sense_buffer;

                lpfc_printf_vlog(vport, KERN_INFO, LOG_FCP,
                                 "0710 Iodone <%d/%d> cmd %p, error "
                                 "x%x SNS x%x x%x Data: x%x x%x\n",
                                 cmd->device->id, cmd->device->lun, cmd,
                                 cmd->result, *lp, *(lp + 3), cmd->retries,
                                 scsi_get_resid(cmd));
        }

        lpfc_update_stats(phba, lpfc_cmd);
        result = cmd->result;
        if (vport->cfg_max_scsicmpl_time &&
           time_after(jiffies, lpfc_cmd->start_time +
                msecs_to_jiffies(vport->cfg_max_scsicmpl_time))) {
                spin_lock_irqsave(shost->host_lock, flags);
                if (pnode && NLP_CHK_NODE_ACT(pnode)) {
                        if (pnode->cmd_qdepth >
                                atomic_read(&pnode->cmd_pending) &&
                                (atomic_read(&pnode->cmd_pending) >
                                LPFC_MIN_TGT_QDEPTH) &&
                                ((cmd->cmnd[0] == READ_10) ||
                                (cmd->cmnd[0] == WRITE_10)))
                                pnode->cmd_qdepth =
                                        atomic_read(&pnode->cmd_pending);

                        pnode->last_change_time = jiffies;
                }
                spin_unlock_irqrestore(shost->host_lock, flags);
        } else if (pnode && NLP_CHK_NODE_ACT(pnode)) {
                if ((pnode->cmd_qdepth < LPFC_MAX_TGT_QDEPTH) &&
                   time_after(jiffies, pnode->last_change_time +
                              msecs_to_jiffies(LPFC_TGTQ_INTERVAL))) {
                        spin_lock_irqsave(shost->host_lock, flags);
                        pnode->cmd_qdepth += pnode->cmd_qdepth *
                                LPFC_TGTQ_RAMPUP_PCENT / 100;
                        if (pnode->cmd_qdepth > LPFC_MAX_TGT_QDEPTH)
                                pnode->cmd_qdepth = LPFC_MAX_TGT_QDEPTH;
                        pnode->last_change_time = jiffies;
                        spin_unlock_irqrestore(shost->host_lock, flags);
                }
        }

        lpfc_scsi_unprep_dma_buf(phba, lpfc_cmd);

        /* The sdev is not guaranteed to be valid post scsi_done upcall. */
        queue_depth = cmd->device->queue_depth;
        scsi_id = cmd->device->id;
        cmd->scsi_done(cmd);

        if (phba->cfg_poll & ENABLE_FCP_RING_POLLING) {
                /*
                 * If there is a thread waiting for command completion
                 * wake up the thread.
                 */
                spin_lock_irqsave(shost->host_lock, flags);
                lpfc_cmd->pCmd = NULL;
                if (lpfc_cmd->waitq)
                        wake_up(lpfc_cmd->waitq);
                spin_unlock_irqrestore(shost->host_lock, flags);
                lpfc_release_scsi_buf(phba, lpfc_cmd);
                return;
        }


        if (!result)
                lpfc_rampup_queue_depth(vport, queue_depth);

        if (!result && pnode && NLP_CHK_NODE_ACT(pnode) &&
           ((jiffies - pnode->last_ramp_up_time) >
                LPFC_Q_RAMP_UP_INTERVAL * HZ) &&
           ((jiffies - pnode->last_q_full_time) >
                LPFC_Q_RAMP_UP_INTERVAL * HZ) &&
           (vport->cfg_lun_queue_depth > queue_depth)) {
                shost_for_each_device(tmp_sdev, shost) {
                        if (vport->cfg_lun_queue_depth > tmp_sdev->queue_depth){
                                if (tmp_sdev->id != scsi_id)
                                        continue;
                                if (tmp_sdev->ordered_tags)
                                        scsi_adjust_queue_depth(tmp_sdev,
                                                MSG_ORDERED_TAG,
                                                tmp_sdev->queue_depth+1);
                                else
                                        scsi_adjust_queue_depth(tmp_sdev,
                                                MSG_SIMPLE_TAG,
                                                tmp_sdev->queue_depth+1);

                                pnode->last_ramp_up_time = jiffies;
                        }
                }
                lpfc_send_sdev_queuedepth_change_event(phba, vport, pnode,
                        0xFFFFFFFF,
                        queue_depth , queue_depth + 1);
        }

        /*
         * Check for queue full.  If the lun is reporting queue full, then
         * back off the lun queue depth to prevent target overloads.
         */
        if (result == SAM_STAT_TASK_SET_FULL && pnode &&
            NLP_CHK_NODE_ACT(pnode)) {
                pnode->last_q_full_time = jiffies;

                shost_for_each_device(tmp_sdev, shost) {
                        if (tmp_sdev->id != scsi_id)
                                continue;
                        depth = scsi_track_queue_full(tmp_sdev,
                                        tmp_sdev->queue_depth - 1);
                }
                /*
                 * The queue depth cannot be lowered any more.
                 * Modify the returned error code to store
                 * the final depth value set by
                 * scsi_track_queue_full.
                 */
                if (depth == -1)
                        depth = shost->cmd_per_lun;

                if (depth) {
                        lpfc_printf_vlog(vport, KERN_WARNING, LOG_FCP,
                                         "0711 detected queue full - lun queue "
                                         "depth adjusted to %d.\n", depth);
                        lpfc_send_sdev_queuedepth_change_event(phba, vport,
                                pnode, 0xFFFFFFFF,
                                depth+1, depth);
                }
        }

        /*
         * If there is a thread waiting for command completion
         * wake up the thread.
         */
        spin_lock_irqsave(shost->host_lock, flags);
        lpfc_cmd->pCmd = NULL;
        if (lpfc_cmd->waitq)
                wake_up(lpfc_cmd->waitq);
        spin_unlock_irqrestore(shost->host_lock, flags);

        lpfc_release_scsi_buf(phba, lpfc_cmd);
}

/**
 * lpfc_fcpcmd_to_iocb - copy the fcp_cmd data into the IOCB
 * @data: A pointer to the immediate command data portion of the IOCB.
 * @fcp_cmnd: The FCP Command that is provided by the SCSI layer.
 *
 * The routine copies the entire FCP command from @fcp_cmnd to @data while
 * byte swapping the data to big endian format for transmission on the wire.
 **/
static void
lpfc_fcpcmd_to_iocb(uint8_t *data, struct fcp_cmnd *fcp_cmnd)
{
        int i, j;
        for (i = 0, j = 0; i < sizeof(struct fcp_cmnd);
             i += sizeof(uint32_t), j++) {
                ((uint32_t *)data)[j] = cpu_to_be32(((uint32_t *)fcp_cmnd)[j]);
        }
}

/**
 * lpfc_scsi_prep_cmnd - Wrapper func for convert scsi cmnd to FCP info unit
 * @vport: The virtual port for which this call is being executed.
 * @lpfc_cmd: The scsi command which needs to send.
 * @pnode: Pointer to lpfc_nodelist.
 *
 * This routine initializes fcp_cmnd and iocb data structure from scsi command
 * to transfer for device with SLI3 interface spec.
 **/
static void
lpfc_scsi_prep_cmnd(struct lpfc_vport *vport, struct lpfc_scsi_buf *lpfc_cmd,
                    struct lpfc_nodelist *pnode)
{
        struct lpfc_hba *phba = vport->phba;
        struct scsi_cmnd *scsi_cmnd = lpfc_cmd->pCmd;
        struct fcp_cmnd *fcp_cmnd = lpfc_cmd->fcp_cmnd;
        IOCB_t *iocb_cmd = &lpfc_cmd->cur_iocbq.iocb;
        struct lpfc_iocbq *piocbq = &(lpfc_cmd->cur_iocbq);
        int datadir = scsi_cmnd->sc_data_direction;
        char tag[2];

        if (!pnode || !NLP_CHK_NODE_ACT(pnode))
                return;

        lpfc_cmd->fcp_rsp->rspSnsLen = 0;
        /* clear task management bits */
        lpfc_cmd->fcp_cmnd->fcpCntl2 = 0;

        int_to_scsilun(lpfc_cmd->pCmd->device->lun,
                        &lpfc_cmd->fcp_cmnd->fcp_lun);

        memcpy(&fcp_cmnd->fcpCdb[0], scsi_cmnd->cmnd, 16);

        if (scsi_populate_tag_msg(scsi_cmnd, tag)) {
                switch (tag[0]) {
                case HEAD_OF_QUEUE_TAG:
                        fcp_cmnd->fcpCntl1 = HEAD_OF_Q;
                        break;
                case ORDERED_QUEUE_TAG:
                        fcp_cmnd->fcpCntl1 = ORDERED_Q;
                        break;
                default:
                        fcp_cmnd->fcpCntl1 = SIMPLE_Q;
                        break;
                }
        } else
                fcp_cmnd->fcpCntl1 = 0;

        /*
         * There are three possibilities here - use scatter-gather segment, use
         * the single mapping, or neither.  Start the lpfc command prep by
         * bumping the bpl beyond the fcp_cmnd and fcp_rsp regions to the first
         * data bde entry.
         */
        if (scsi_sg_count(scsi_cmnd)) {
                if (datadir == DMA_TO_DEVICE) {
                        iocb_cmd->ulpCommand = CMD_FCP_IWRITE64_CR;
                        if (phba->sli_rev < LPFC_SLI_REV4) {
                                iocb_cmd->un.fcpi.fcpi_parm = 0;
                                iocb_cmd->ulpPU = 0;
                        } else
                                iocb_cmd->ulpPU = PARM_READ_CHECK;
                        fcp_cmnd->fcpCntl3 = WRITE_DATA;
                        phba->fc4OutputRequests++;
                } else {
                        iocb_cmd->ulpCommand = CMD_FCP_IREAD64_CR;
                        iocb_cmd->ulpPU = PARM_READ_CHECK;
                        fcp_cmnd->fcpCntl3 = READ_DATA;
                        phba->fc4InputRequests++;
                }
        } else {
                iocb_cmd->ulpCommand = CMD_FCP_ICMND64_CR;
                iocb_cmd->un.fcpi.fcpi_parm = 0;
                iocb_cmd->ulpPU = 0;
                fcp_cmnd->fcpCntl3 = 0;
                phba->fc4ControlRequests++;
        }
        if (phba->sli_rev == 3 &&
            !(phba->sli3_options & LPFC_SLI3_BG_ENABLED))
                lpfc_fcpcmd_to_iocb(iocb_cmd->unsli3.fcp_ext.icd, fcp_cmnd);
        /*
         * Finish initializing those IOCB fields that are independent
         * of the scsi_cmnd request_buffer
         */
        piocbq->iocb.ulpContext = pnode->nlp_rpi;
        if (pnode->nlp_fcp_info & NLP_FCP_2_DEVICE)
                piocbq->iocb.ulpFCP2Rcvy = 1;
        else
                piocbq->iocb.ulpFCP2Rcvy = 0;

        piocbq->iocb.ulpClass = (pnode->nlp_fcp_info & 0x0f);
        piocbq->context1  = lpfc_cmd;
        piocbq->iocb_cmpl = lpfc_scsi_cmd_iocb_cmpl;
        piocbq->iocb.ulpTimeout = lpfc_cmd->timeout;
        piocbq->vport = vport;
}

/**
 * lpfc_scsi_prep_task_mgmt_cmnd - Convert SLI3 scsi TM cmd to FCP info unit
 * @vport: The virtual port for which this call is being executed.
 * @lpfc_cmd: Pointer to lpfc_scsi_buf data structure.
 * @lun: Logical unit number.
 * @task_mgmt_cmd: SCSI task management command.
 *
 * This routine creates FCP information unit corresponding to @task_mgmt_cmd
 * for device with SLI-3 interface spec.
 *
 * Return codes:
 *   0 - Error
 *   1 - Success
 **/
static int
lpfc_scsi_prep_task_mgmt_cmd(struct lpfc_vport *vport,
                             struct lpfc_scsi_buf *lpfc_cmd,
                             unsigned int lun,
                             uint8_t task_mgmt_cmd)
{
        struct lpfc_iocbq *piocbq;
        IOCB_t *piocb;
        struct fcp_cmnd *fcp_cmnd;
        struct lpfc_rport_data *rdata = lpfc_cmd->rdata;
        struct lpfc_nodelist *ndlp = rdata->pnode;

        if (!ndlp || !NLP_CHK_NODE_ACT(ndlp) ||
            ndlp->nlp_state != NLP_STE_MAPPED_NODE)
                return 0;

        piocbq = &(lpfc_cmd->cur_iocbq);
        piocbq->vport = vport;

        piocb = &piocbq->iocb;

        fcp_cmnd = lpfc_cmd->fcp_cmnd;
        /* Clear out any old data in the FCP command area */
        memset(fcp_cmnd, 0, sizeof(struct fcp_cmnd));
        int_to_scsilun(lun, &fcp_cmnd->fcp_lun);
        fcp_cmnd->fcpCntl2 = task_mgmt_cmd;
        if (vport->phba->sli_rev == 3 &&
            !(vport->phba->sli3_options & LPFC_SLI3_BG_ENABLED))
                lpfc_fcpcmd_to_iocb(piocb->unsli3.fcp_ext.icd, fcp_cmnd);
        piocb->ulpCommand = CMD_FCP_ICMND64_CR;
        piocb->ulpContext = ndlp->nlp_rpi;
        if (ndlp->nlp_fcp_info & NLP_FCP_2_DEVICE) {
                piocb->ulpFCP2Rcvy = 1;
        }
        piocb->ulpClass = (ndlp->nlp_fcp_info & 0x0f);

        /* ulpTimeout is only one byte */
        if (lpfc_cmd->timeout > 0xff) {
                /*
                 * Do not timeout the command at the firmware level.
                 * The driver will provide the timeout mechanism.
                 */
                piocb->ulpTimeout = 0;
        } else
                piocb->ulpTimeout = lpfc_cmd->timeout;

        if (vport->phba->sli_rev == LPFC_SLI_REV4)
                lpfc_sli4_set_rsp_sgl_last(vport->phba, lpfc_cmd);

        return 1;
}

/**
 * lpfc_scsi_api_table_setup - Set up scsi api fucntion jump table
 * @phba: The hba struct for which this call is being executed.
 * @dev_grp: The HBA PCI-Device group number.
 *
 * This routine sets up the SCSI interface API function jump table in @phba
 * struct.
 * Returns: 0 - success, -ENODEV - failure.
 **/
int
lpfc_scsi_api_table_setup(struct lpfc_hba *phba, uint8_t dev_grp)
{

        phba->lpfc_scsi_unprep_dma_buf = lpfc_scsi_unprep_dma_buf;
        phba->lpfc_scsi_prep_cmnd = lpfc_scsi_prep_cmnd;
        phba->lpfc_get_scsi_buf = lpfc_get_scsi_buf;

        switch (dev_grp) {
        case LPFC_PCI_DEV_LP:
                phba->lpfc_new_scsi_buf = lpfc_new_scsi_buf_s3;
                phba->lpfc_scsi_prep_dma_buf = lpfc_scsi_prep_dma_buf_s3;
                phba->lpfc_release_scsi_buf = lpfc_release_scsi_buf_s3;
                break;
        case LPFC_PCI_DEV_OC:
                phba->lpfc_new_scsi_buf = lpfc_new_scsi_buf_s4;
                phba->lpfc_scsi_prep_dma_buf = lpfc_scsi_prep_dma_buf_s4;
                phba->lpfc_release_scsi_buf = lpfc_release_scsi_buf_s4;
                break;
        default:
                lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
                                "1418 Invalid HBA PCI-device group: 0x%x\n",
                                dev_grp);
                return -ENODEV;
                break;
        }
        phba->lpfc_get_scsi_buf = lpfc_get_scsi_buf;
        phba->lpfc_rampdown_queue_depth = lpfc_rampdown_queue_depth;
        return 0;
}

/**
 * lpfc_taskmgmt_def_cmpl - IOCB completion routine for task management command
 * @phba: The Hba for which this call is being executed.
 * @cmdiocbq: Pointer to lpfc_iocbq data structure.
 * @rspiocbq: Pointer to lpfc_iocbq data structure.
 *
 * This routine is IOCB completion routine for device reset and target reset
 * routine. This routine release scsi buffer associated with lpfc_cmd.
 **/
static void
lpfc_tskmgmt_def_cmpl(struct lpfc_hba *phba,
                        struct lpfc_iocbq *cmdiocbq,
                        struct lpfc_iocbq *rspiocbq)
{
        struct lpfc_scsi_buf *lpfc_cmd =
                (struct lpfc_scsi_buf *) cmdiocbq->context1;
        if (lpfc_cmd)
                lpfc_release_scsi_buf(phba, lpfc_cmd);
        return;
}

/**
 * lpfc_info - Info entry point of scsi_host_template data structure
 * @host: The scsi host for which this call is being executed.
 *
 * This routine provides module information about hba.
 *
 * Reutrn code:
 *   Pointer to char - Success.
 **/
const char *
lpfc_info(struct Scsi_Host *host)
{
        struct lpfc_vport *vport = (struct lpfc_vport *) host->hostdata;
        struct lpfc_hba   *phba = vport->phba;
        int len;
        static char  lpfcinfobuf[384];

        memset(lpfcinfobuf,0,384);
        if (phba && phba->pcidev){
                strncpy(lpfcinfobuf, phba->ModelDesc, 256);
                len = strlen(lpfcinfobuf);
                snprintf(lpfcinfobuf + len,
                        384-len,
                        " on PCI bus %02x device %02x irq %d",
                        phba->pcidev->bus->number,
                        phba->pcidev->devfn,
                        phba->pcidev->irq);
                len = strlen(lpfcinfobuf);
                if (phba->Port[0]) {
                        snprintf(lpfcinfobuf + len,
                                 384-len,
                                 " port %s",
                                 phba->Port);
                }
        }
        return lpfcinfobuf;
}

/**
 * lpfc_poll_rearm_time - Routine to modify fcp_poll timer of hba
 * @phba: The Hba for which this call is being executed.
 *
 * This routine modifies fcp_poll_timer  field of @phba by cfg_poll_tmo.
 * The default value of cfg_poll_tmo is 10 milliseconds.
 **/
static __inline__ void lpfc_poll_rearm_timer(struct lpfc_hba * phba)
{
        unsigned long  poll_tmo_expires =
                (jiffies + msecs_to_jiffies(phba->cfg_poll_tmo));

        if (phba->sli.ring[LPFC_FCP_RING].txcmplq_cnt)
                mod_timer(&phba->fcp_poll_timer,
                          poll_tmo_expires);
}

/**
 * lpfc_poll_start_timer - Routine to start fcp_poll_timer of HBA
 * @phba: The Hba for which this call is being executed.
 *
 * This routine starts the fcp_poll_timer of @phba.
 **/
void lpfc_poll_start_timer(struct lpfc_hba * phba)
{
        lpfc_poll_rearm_timer(phba);
}

/**
 * lpfc_poll_timeout - Restart polling timer
 * @ptr: Map to lpfc_hba data structure pointer.
 *
 * This routine restarts fcp_poll timer, when FCP ring  polling is enable
 * and FCP Ring interrupt is disable.
 **/

void lpfc_poll_timeout(unsigned long ptr)
{
        struct lpfc_hba *phba = (struct lpfc_hba *) ptr;

        if (phba->cfg_poll & ENABLE_FCP_RING_POLLING) {
                lpfc_sli_poll_fcp_ring (phba);
                if (phba->cfg_poll & DISABLE_FCP_RING_INT)
                        lpfc_poll_rearm_timer(phba);
        }
}

/**
 * lpfc_queuecommand - scsi_host_template queuecommand entry point
 * @cmnd: Pointer to scsi_cmnd data structure.
 * @done: Pointer to done routine.
 *
 * Driver registers this routine to scsi midlayer to submit a @cmd to process.
 * This routine prepares an IOCB from scsi command and provides to firmware.
 * The @done callback is invoked after driver finished processing the command.
 *
 * Return value :
 *   0 - Success
 *   SCSI_MLQUEUE_HOST_BUSY - Block all devices served by this host temporarily.
 **/
static int
lpfc_queuecommand(struct scsi_cmnd *cmnd, void (*done) (struct scsi_cmnd *))
{
        struct Scsi_Host  *shost = cmnd->device->host;
        struct lpfc_vport *vport = (struct lpfc_vport *) shost->hostdata;
        struct lpfc_hba   *phba = vport->phba;
        struct lpfc_rport_data *rdata = cmnd->device->hostdata;
        struct lpfc_nodelist *ndlp = rdata->pnode;
        struct lpfc_scsi_buf *lpfc_cmd;
        struct fc_rport *rport = starget_to_rport(scsi_target(cmnd->device));
        int err;

        err = fc_remote_port_chkready(rport);
        if (err) {
                cmnd->result = err;
                goto out_fail_command;
        }

        if (!(phba->sli3_options & LPFC_SLI3_BG_ENABLED) &&
                scsi_get_prot_op(cmnd) != SCSI_PROT_NORMAL) {

                printk(KERN_ERR "BLKGRD ERROR: rcvd protected cmd:%02x op:%02x "
                                "str=%s without registering for BlockGuard - "
                                "Rejecting command\n",
                                cmnd->cmnd[0], scsi_get_prot_op(cmnd),
                                dif_op_str[scsi_get_prot_op(cmnd)]);
                goto out_fail_command;
        }

        /*
         * Catch race where our node has transitioned, but the
         * transport is still transitioning.
         */
        if (!ndlp || !NLP_CHK_NODE_ACT(ndlp)) {
                cmnd->result = ScsiResult(DID_TRANSPORT_DISRUPTED, 0);
                goto out_fail_command;
        }
        if (vport->cfg_max_scsicmpl_time &&
                (atomic_read(&ndlp->cmd_pending) >= ndlp->cmd_qdepth))
                goto out_host_busy;

        lpfc_cmd = lpfc_get_scsi_buf(phba);
        if (lpfc_cmd == NULL) {
                lpfc_rampdown_queue_depth(phba);

                lpfc_printf_vlog(vport, KERN_INFO, LOG_FCP,
                                 "0707 driver's buffer pool is empty, "
                                 "IO busied\n");
                goto out_host_busy;
        }

        /*
         * Store the midlayer's command structure for the completion phase
         * and complete the command initialization.
         */
        lpfc_cmd->pCmd  = cmnd;
        lpfc_cmd->rdata = rdata;
        lpfc_cmd->timeout = 0;
        lpfc_cmd->start_time = jiffies;
        cmnd->host_scribble = (unsigned char *)lpfc_cmd;
        cmnd->scsi_done = done;

        if (scsi_get_prot_op(cmnd) != SCSI_PROT_NORMAL) {
                lpfc_printf_vlog(vport, KERN_WARNING, LOG_BG,
                                "9033 BLKGRD: rcvd protected cmd:%02x op:%02x "
                                "str=%s\n",
                                cmnd->cmnd[0], scsi_get_prot_op(cmnd),
                                dif_op_str[scsi_get_prot_op(cmnd)]);
                lpfc_printf_vlog(vport, KERN_WARNING, LOG_BG,
                                "9034 BLKGRD: CDB: %02x %02x %02x %02x %02x "
                                "%02x %02x %02x %02x %02x \n",
                                cmnd->cmnd[0], cmnd->cmnd[1], cmnd->cmnd[2],
                                cmnd->cmnd[3], cmnd->cmnd[4], cmnd->cmnd[5],
                                cmnd->cmnd[6], cmnd->cmnd[7], cmnd->cmnd[8],
                                cmnd->cmnd[9]);
                if (cmnd->cmnd[0] == READ_10)
                        lpfc_printf_vlog(vport, KERN_WARNING, LOG_BG,
                                        "9035 BLKGRD: READ @ sector %llu, "
                                        "count %u\n",
                                        (unsigned long long)scsi_get_lba(cmnd),
                                        blk_rq_sectors(cmnd->request));
                else if (cmnd->cmnd[0] == WRITE_10)
                        lpfc_printf_vlog(vport, KERN_WARNING, LOG_BG,
                                        "9036 BLKGRD: WRITE @ sector %llu, "
                                        "count %u cmd=%p\n",
                                        (unsigned long long)scsi_get_lba(cmnd),
                                        blk_rq_sectors(cmnd->request),
                                        cmnd);

                err = lpfc_bg_scsi_prep_dma_buf(phba, lpfc_cmd);
        } else {
                lpfc_printf_vlog(vport, KERN_WARNING, LOG_BG,
                                "9038 BLKGRD: rcvd unprotected cmd:%02x op:%02x"
                                " str=%s\n",
                                cmnd->cmnd[0], scsi_get_prot_op(cmnd),
                                dif_op_str[scsi_get_prot_op(cmnd)]);
                lpfc_printf_vlog(vport, KERN_WARNING, LOG_BG,
                                 "9039 BLKGRD: CDB: %02x %02x %02x %02x %02x "
                                 "%02x %02x %02x %02x %02x \n",
                                 cmnd->cmnd[0], cmnd->cmnd[1], cmnd->cmnd[2],
                                 cmnd->cmnd[3], cmnd->cmnd[4], cmnd->cmnd[5],
                                 cmnd->cmnd[6], cmnd->cmnd[7], cmnd->cmnd[8],
                                 cmnd->cmnd[9]);
                if (cmnd->cmnd[0] == READ_10)
                        lpfc_printf_vlog(vport, KERN_WARNING, LOG_BG,
                                         "9040 dbg: READ @ sector %llu, "
                                         "count %u\n",
                                         (unsigned long long)scsi_get_lba(cmnd),
                                         blk_rq_sectors(cmnd->request));
                else if (cmnd->cmnd[0] == WRITE_10)
                        lpfc_printf_vlog(vport, KERN_WARNING, LOG_BG,
                                         "9041 dbg: WRITE @ sector %llu, "
                                         "count %u cmd=%p\n",
                                         (unsigned long long)scsi_get_lba(cmnd),
                                         blk_rq_sectors(cmnd->request), cmnd);
                else
                        lpfc_printf_vlog(vport, KERN_WARNING, LOG_BG,
                                         "9042 dbg: parser not implemented\n");
                err = lpfc_scsi_prep_dma_buf(phba, lpfc_cmd);
        }

        if (err)
                goto out_host_busy_free_buf;

        lpfc_scsi_prep_cmnd(vport, lpfc_cmd, ndlp);

        atomic_inc(&ndlp->cmd_pending);
        err = lpfc_sli_issue_iocb(phba, LPFC_FCP_RING,
                                  &lpfc_cmd->cur_iocbq, SLI_IOCB_RET_IOCB);
        if (err) {
                atomic_dec(&ndlp->cmd_pending);
                goto out_host_busy_free_buf;
        }
        if (phba->cfg_poll & ENABLE_FCP_RING_POLLING) {
                lpfc_sli_poll_fcp_ring(phba);
                if (phba->cfg_poll & DISABLE_FCP_RING_INT)
                        lpfc_poll_rearm_timer(phba);
        }

        return 0;

 out_host_busy_free_buf:
        lpfc_scsi_unprep_dma_buf(phba, lpfc_cmd);
        lpfc_release_scsi_buf(phba, lpfc_cmd);
 out_host_busy:
        return SCSI_MLQUEUE_HOST_BUSY;

 out_fail_command:
        done(cmnd);
        return 0;
}

/**
 * lpfc_block_error_handler - Routine to block error  handler
 * @cmnd: Pointer to scsi_cmnd data structure.
 *
 *  This routine blocks execution till fc_rport state is not FC_PORSTAT_BLCOEKD.
 **/
static void
lpfc_block_error_handler(struct scsi_cmnd *cmnd)
{
        struct Scsi_Host *shost = cmnd->device->host;
        struct fc_rport *rport = starget_to_rport(scsi_target(cmnd->device));

        spin_lock_irq(shost->host_lock);
        while (rport->port_state == FC_PORTSTATE_BLOCKED) {
                spin_unlock_irq(shost->host_lock);
                msleep(1000);
                spin_lock_irq(shost->host_lock);
        }
        spin_unlock_irq(shost->host_lock);
        return;
}

/**
 * lpfc_abort_handler - scsi_host_template eh_abort_handler entry point
 * @cmnd: Pointer to scsi_cmnd data structure.
 *
 * This routine aborts @cmnd pending in base driver.
 *
 * Return code :
 *   0x2003 - Error
 *   0x2002 - Success
 **/
static int
lpfc_abort_handler(struct scsi_cmnd *cmnd)
{
        struct Scsi_Host  *shost = cmnd->device->host;
        struct lpfc_vport *vport = (struct lpfc_vport *) shost->hostdata;
        struct lpfc_hba   *phba = vport->phba;
        struct lpfc_iocbq *iocb;
        struct lpfc_iocbq *abtsiocb;
        struct lpfc_scsi_buf *lpfc_cmd;
        IOCB_t *cmd, *icmd;
        int ret = SUCCESS;
        DECLARE_WAIT_QUEUE_HEAD_ONSTACK(waitq);

        lpfc_block_error_handler(cmnd);
        lpfc_cmd = (struct lpfc_scsi_buf *)cmnd->host_scribble;
        BUG_ON(!lpfc_cmd);

        /*
         * If pCmd field of the corresponding lpfc_scsi_buf structure
         * points to a different SCSI command, then the driver has
         * already completed this command, but the midlayer did not
         * see the completion before the eh fired.  Just return
         * SUCCESS.
         */
        iocb = &lpfc_cmd->cur_iocbq;
        if (lpfc_cmd->pCmd != cmnd)
                goto out;

        BUG_ON(iocb->context1 != lpfc_cmd);

        abtsiocb = lpfc_sli_get_iocbq(phba);
        if (abtsiocb == NULL) {
                ret = FAILED;
                goto out;
        }

        /*
         * The scsi command can not be in txq and it is in flight because the
         * pCmd is still pointig at the SCSI command we have to abort. There
         * is no need to search the txcmplq. Just send an abort to the FW.
         */

        cmd = &iocb->iocb;
        icmd = &abtsiocb->iocb;
        icmd->un.acxri.abortType = ABORT_TYPE_ABTS;
        icmd->un.acxri.abortContextTag = cmd->ulpContext;
        if (phba->sli_rev == LPFC_SLI_REV4)
                icmd->un.acxri.abortIoTag = iocb->sli4_xritag;
        else
                icmd->un.acxri.abortIoTag = cmd->ulpIoTag;

        icmd->ulpLe = 1;
        icmd->ulpClass = cmd->ulpClass;
        if (lpfc_is_link_up(phba))
                icmd->ulpCommand = CMD_ABORT_XRI_CN;
        else
                icmd->ulpCommand = CMD_CLOSE_XRI_CN;

        abtsiocb->iocb_cmpl = lpfc_sli_abort_fcp_cmpl;
        abtsiocb->vport = vport;
        if (lpfc_sli_issue_iocb(phba, LPFC_FCP_RING, abtsiocb, 0) ==
            IOCB_ERROR) {
                lpfc_sli_release_iocbq(phba, abtsiocb);
                ret = FAILED;
                goto out;
        }

        if (phba->cfg_poll & DISABLE_FCP_RING_INT)
                lpfc_sli_poll_fcp_ring (phba);

        lpfc_cmd->waitq = &waitq;
        /* Wait for abort to complete */
        wait_event_timeout(waitq,
                          (lpfc_cmd->pCmd != cmnd),
                           (2*vport->cfg_devloss_tmo*HZ));

        spin_lock_irq(shost->host_lock);
        lpfc_cmd->waitq = NULL;
        spin_unlock_irq(shost->host_lock);

        if (lpfc_cmd->pCmd == cmnd) {
                ret = FAILED;
                lpfc_printf_vlog(vport, KERN_ERR, LOG_FCP,
                                 "0748 abort handler timed out waiting "
                                 "for abort to complete: ret %#x, ID %d, "
                                 "LUN %d, snum %#lx\n",
                                 ret, cmnd->device->id, cmnd->device->lun,
                                 cmnd->serial_number);
        }

 out:
        lpfc_printf_vlog(vport, KERN_WARNING, LOG_FCP,
                         "0749 SCSI Layer I/O Abort Request Status x%x ID %d "
                         "LUN %d snum %#lx\n", ret, cmnd->device->id,
                         cmnd->device->lun, cmnd->serial_number);
        return ret;
}

static char *
lpfc_taskmgmt_name(uint8_t task_mgmt_cmd)
{
        switch (task_mgmt_cmd) {
        case FCP_ABORT_TASK_SET:
                return "ABORT_TASK_SET";
        case FCP_CLEAR_TASK_SET:
                return "FCP_CLEAR_TASK_SET";
        case FCP_BUS_RESET:
                return "FCP_BUS_RESET";
        case FCP_LUN_RESET:
                return "FCP_LUN_RESET";
        case FCP_TARGET_RESET:
                return "FCP_TARGET_RESET";
        case FCP_CLEAR_ACA:
                return "FCP_CLEAR_ACA";
        case FCP_TERMINATE_TASK:
                return "FCP_TERMINATE_TASK";
        default:
                return "unknown";
        }
}

/**
 * lpfc_send_taskmgmt - Generic SCSI Task Mgmt Handler
 * @vport: The virtual port for which this call is being executed.
 * @rdata: Pointer to remote port local data
 * @tgt_id: Target ID of remote device.
 * @lun_id: Lun number for the TMF
 * @task_mgmt_cmd: type of TMF to send
 *
 * This routine builds and sends a TMF (SCSI Task Mgmt Function) to
 * a remote port.
 *
 * Return Code:
 *   0x2003 - Error
 *   0x2002 - Success.
 **/
static int
lpfc_send_taskmgmt(struct lpfc_vport *vport, struct lpfc_rport_data *rdata,
                    unsigned  tgt_id, unsigned int lun_id,
                    uint8_t task_mgmt_cmd)
{
        struct lpfc_hba   *phba = vport->phba;
        struct lpfc_scsi_buf *lpfc_cmd;
        struct lpfc_iocbq *iocbq;
        struct lpfc_iocbq *iocbqrsp;
        int ret;
        int status;

        if (!rdata->pnode || !NLP_CHK_NODE_ACT(rdata->pnode))
                return FAILED;

        lpfc_cmd = lpfc_get_scsi_buf(phba);
        if (lpfc_cmd == NULL)
                return FAILED;
        lpfc_cmd->timeout = 60;
        lpfc_cmd->rdata = rdata;

        status = lpfc_scsi_prep_task_mgmt_cmd(vport, lpfc_cmd, lun_id,
                                           task_mgmt_cmd);
        if (!status) {
                lpfc_release_scsi_buf(phba, lpfc_cmd);
                return FAILED;
        }

        iocbq = &lpfc_cmd->cur_iocbq;
        iocbqrsp = lpfc_sli_get_iocbq(phba);
        if (iocbqrsp == NULL) {
                lpfc_release_scsi_buf(phba, lpfc_cmd);
                return FAILED;
        }

        lpfc_printf_vlog(vport, KERN_INFO, LOG_FCP,
                         "0702 Issue %s to TGT %d LUN %d "
                         "rpi x%x nlp_flag x%x\n",
                         lpfc_taskmgmt_name(task_mgmt_cmd), tgt_id, lun_id,
                         rdata->pnode->nlp_rpi, rdata->pnode->nlp_flag);

        status = lpfc_sli_issue_iocb_wait(phba, LPFC_FCP_RING,
                                          iocbq, iocbqrsp, lpfc_cmd->timeout);
        if (status != IOCB_SUCCESS) {
                if (status == IOCB_TIMEDOUT) {
                        iocbq->iocb_cmpl = lpfc_tskmgmt_def_cmpl;
                        ret = TIMEOUT_ERROR;
                } else
                        ret = FAILED;
                lpfc_cmd->status = IOSTAT_DRIVER_REJECT;
                lpfc_printf_vlog(vport, KERN_ERR, LOG_FCP,
                         "0727 TMF %s to TGT %d LUN %d failed (%d, %d)\n",
                         lpfc_taskmgmt_name(task_mgmt_cmd),
                         tgt_id, lun_id, iocbqrsp->iocb.ulpStatus,
                         iocbqrsp->iocb.un.ulpWord[4]);
        } else
                ret = SUCCESS;

        lpfc_sli_release_iocbq(phba, iocbqrsp);

        if (ret != TIMEOUT_ERROR)
                lpfc_release_scsi_buf(phba, lpfc_cmd);

        return ret;
}

/**
 * lpfc_chk_tgt_mapped -
 * @vport: The virtual port to check on
 * @cmnd: Pointer to scsi_cmnd data structure.
 *
 * This routine delays until the scsi target (aka rport) for the
 * command exists (is present and logged in) or we declare it non-existent.
 *
 * Return code :
 *  0x2003 - Error
 *  0x2002 - Success
 **/
static int
lpfc_chk_tgt_mapped(struct lpfc_vport *vport, struct scsi_cmnd *cmnd)
{
        struct lpfc_rport_data *rdata = cmnd->device->hostdata;
        struct lpfc_nodelist *pnode = rdata->pnode;
        unsigned long later;

        /*
         * If target is not in a MAPPED state, delay until
         * target is rediscovered or devloss timeout expires.
         */
        later = msecs_to_jiffies(2 * vport->cfg_devloss_tmo * 1000) + jiffies;
        while (time_after(later, jiffies)) {
                if (!pnode || !NLP_CHK_NODE_ACT(pnode))
                        return FAILED;
                if (pnode->nlp_state == NLP_STE_MAPPED_NODE)
                        return SUCCESS;
                schedule_timeout_uninterruptible(msecs_to_jiffies(500));
                rdata = cmnd->device->hostdata;
                if (!rdata)
                        return FAILED;
                pnode = rdata->pnode;
        }
        if (!pnode || !NLP_CHK_NODE_ACT(pnode) ||
            (pnode->nlp_state != NLP_STE_MAPPED_NODE))
                return FAILED;
        return SUCCESS;
}

/**
 * lpfc_reset_flush_io_context -
 * @vport: The virtual port (scsi_host) for the flush context
 * @tgt_id: If aborting by Target contect - specifies the target id
 * @lun_id: If aborting by Lun context - specifies the lun id
 * @context: specifies the context level to flush at.
 *
 * After a reset condition via TMF, we need to flush orphaned i/o
 * contexts from the adapter. This routine aborts any contexts
 * outstanding, then waits for their completions. The wait is
 * bounded by devloss_tmo though.
 *
 * Return code :
 *  0x2003 - Error
 *  0x2002 - Success
 **/
static int
lpfc_reset_flush_io_context(struct lpfc_vport *vport, uint16_t tgt_id,
                        uint64_t lun_id, lpfc_ctx_cmd context)
{
        struct lpfc_hba   *phba = vport->phba;
        unsigned long later;
        int cnt;

        cnt = lpfc_sli_sum_iocb(vport, tgt_id, lun_id, context);
        if (cnt)
                lpfc_sli_abort_iocb(vport, &phba->sli.ring[phba->sli.fcp_ring],
                                    tgt_id, lun_id, context);
        later = msecs_to_jiffies(2 * vport->cfg_devloss_tmo * 1000) + jiffies;
        while (time_after(later, jiffies) && cnt) {
                schedule_timeout_uninterruptible(msecs_to_jiffies(20));
                cnt = lpfc_sli_sum_iocb(vport, tgt_id, lun_id, context);
        }
        if (cnt) {
                lpfc_printf_vlog(vport, KERN_ERR, LOG_FCP,
                        "0724 I/O flush failure for context %s : cnt x%x\n",
                        ((context == LPFC_CTX_LUN) ? "LUN" :
                         ((context == LPFC_CTX_TGT) ? "TGT" :
                          ((context == LPFC_CTX_HOST) ? "HOST" : "Unknown"))),
                        cnt);
                return FAILED;
        }
        return SUCCESS;
}

/**
 * lpfc_device_reset_handler - scsi_host_template eh_device_reset entry point
 * @cmnd: Pointer to scsi_cmnd data structure.
 *
 * This routine does a device reset by sending a LUN_RESET task management
 * command.
 *
 * Return code :
 *  0x2003 - Error
 *  0x2002 - Success
 **/
static int
lpfc_device_reset_handler(struct scsi_cmnd *cmnd)
{
        struct Scsi_Host  *shost = cmnd->device->host;
        struct lpfc_vport *vport = (struct lpfc_vport *) shost->hostdata;
        struct lpfc_rport_data *rdata = cmnd->device->hostdata;
        struct lpfc_nodelist *pnode = rdata->pnode;
        unsigned tgt_id = cmnd->device->id;
        unsigned int lun_id = cmnd->device->lun;
        struct lpfc_scsi_event_header scsi_event;
        int status;

        lpfc_block_error_handler(cmnd);

        status = lpfc_chk_tgt_mapped(vport, cmnd);
        if (status == FAILED) {
                lpfc_printf_vlog(vport, KERN_ERR, LOG_FCP,
                        "0721 Device Reset rport failure: rdata x%p\n", rdata);
                return FAILED;
        }

        scsi_event.event_type = FC_REG_SCSI_EVENT;
        scsi_event.subcategory = LPFC_EVENT_LUNRESET;
        scsi_event.lun = lun_id;
        memcpy(scsi_event.wwpn, &pnode->nlp_portname, sizeof(struct lpfc_name));
        memcpy(scsi_event.wwnn, &pnode->nlp_nodename, sizeof(struct lpfc_name));

        fc_host_post_vendor_event(shost, fc_get_event_number(),
                sizeof(scsi_event), (char *)&scsi_event, LPFC_NL_VENDOR_ID);

        status = lpfc_send_taskmgmt(vport, rdata, tgt_id, lun_id,
                                                FCP_LUN_RESET);

        lpfc_printf_vlog(vport, KERN_ERR, LOG_FCP,
                         "0713 SCSI layer issued Device Reset (%d, %d) "
                         "return x%x\n", tgt_id, lun_id, status);

        /*
         * We have to clean up i/o as : they may be orphaned by the TMF;
         * or if the TMF failed, they may be in an indeterminate state.
         * So, continue on.
         * We will report success if all the i/o aborts successfully.
         */
        status = lpfc_reset_flush_io_context(vport, tgt_id, lun_id,
                                                LPFC_CTX_LUN);
        return status;
}

/**
 * lpfc_target_reset_handler - scsi_host_template eh_target_reset entry point
 * @cmnd: Pointer to scsi_cmnd data structure.
 *
 * This routine does a target reset by sending a TARGET_RESET task management
 * command.
 *
 * Return code :
 *  0x2003 - Error
 *  0x2002 - Success
 **/
static int
lpfc_target_reset_handler(struct scsi_cmnd *cmnd)
{
        struct Scsi_Host  *shost = cmnd->device->host;
        struct lpfc_vport *vport = (struct lpfc_vport *) shost->hostdata;
        struct lpfc_rport_data *rdata = cmnd->device->hostdata;
        struct lpfc_nodelist *pnode = rdata->pnode;
        unsigned tgt_id = cmnd->device->id;
        unsigned int lun_id = cmnd->device->lun;
        struct lpfc_scsi_event_header scsi_event;
        int status;

        lpfc_block_error_handler(cmnd);

        status = lpfc_chk_tgt_mapped(vport, cmnd);
        if (status == FAILED) {
                lpfc_printf_vlog(vport, KERN_ERR, LOG_FCP,
                        "0722 Target Reset rport failure: rdata x%p\n", rdata);
                return FAILED;
        }

        scsi_event.event_type = FC_REG_SCSI_EVENT;
        scsi_event.subcategory = LPFC_EVENT_TGTRESET;
        scsi_event.lun = 0;
        memcpy(scsi_event.wwpn, &pnode->nlp_portname, sizeof(struct lpfc_name));
        memcpy(scsi_event.wwnn, &pnode->nlp_nodename, sizeof(struct lpfc_name));

        fc_host_post_vendor_event(shost, fc_get_event_number(),
                sizeof(scsi_event), (char *)&scsi_event, LPFC_NL_VENDOR_ID);

        status = lpfc_send_taskmgmt(vport, rdata, tgt_id, lun_id,
                                        FCP_TARGET_RESET);

        lpfc_printf_vlog(vport, KERN_ERR, LOG_FCP,
                         "0723 SCSI layer issued Target Reset (%d, %d) "
                         "return x%x\n", tgt_id, lun_id, status);

        /*
         * We have to clean up i/o as : they may be orphaned by the TMF;
         * or if the TMF failed, they may be in an indeterminate state.
         * So, continue on.
         * We will report success if all the i/o aborts successfully.
         */
        status = lpfc_reset_flush_io_context(vport, tgt_id, lun_id,
                                        LPFC_CTX_TGT);
        return status;
}

/**
 * lpfc_bus_reset_handler - scsi_host_template eh_bus_reset_handler entry point
 * @cmnd: Pointer to scsi_cmnd data structure.
 *
 * This routine does target reset to all targets on @cmnd->device->host.
 * This emulates Parallel SCSI Bus Reset Semantics.
 *
 * Return code :
 *  0x2003 - Error
 *  0x2002 - Success
 **/
static int
lpfc_bus_reset_handler(struct scsi_cmnd *cmnd)
{
        struct Scsi_Host  *shost = cmnd->device->host;
        struct lpfc_vport *vport = (struct lpfc_vport *) shost->hostdata;
        struct lpfc_nodelist *ndlp = NULL;
        struct lpfc_scsi_event_header scsi_event;
        int match;
        int ret = SUCCESS, status, i;

        scsi_event.event_type = FC_REG_SCSI_EVENT;
        scsi_event.subcategory = LPFC_EVENT_BUSRESET;
        scsi_event.lun = 0;
        memcpy(scsi_event.wwpn, &vport->fc_portname, sizeof(struct lpfc_name));
        memcpy(scsi_event.wwnn, &vport->fc_nodename, sizeof(struct lpfc_name));

        fc_host_post_vendor_event(shost, fc_get_event_number(),
                sizeof(scsi_event), (char *)&scsi_event, LPFC_NL_VENDOR_ID);

        lpfc_block_error_handler(cmnd);

        /*
         * Since the driver manages a single bus device, reset all
         * targets known to the driver.  Should any target reset
         * fail, this routine returns failure to the midlayer.
         */
        for (i = 0; i < LPFC_MAX_TARGET; i++) {
                /* Search for mapped node by target ID */
                match = 0;
                spin_lock_irq(shost->host_lock);
                list_for_each_entry(ndlp, &vport->fc_nodes, nlp_listp) {
                        if (!NLP_CHK_NODE_ACT(ndlp))
                                continue;
                        if (ndlp->nlp_state == NLP_STE_MAPPED_NODE &&
                            ndlp->nlp_sid == i &&
                            ndlp->rport) {
                                match = 1;
                                break;
                        }
                }
                spin_unlock_irq(shost->host_lock);
                if (!match)
                        continue;

                status = lpfc_send_taskmgmt(vport, ndlp->rport->dd_data,
                                        i, 0, FCP_TARGET_RESET);

                if (status != SUCCESS) {
                        lpfc_printf_vlog(vport, KERN_ERR, LOG_FCP,
                                         "0700 Bus Reset on target %d failed\n",
                                         i);
                        ret = FAILED;
                }
        }
        /*
         * We have to clean up i/o as : they may be orphaned by the TMFs
         * above; or if any of the TMFs failed, they may be in an
         * indeterminate state.
         * We will report success if all the i/o aborts successfully.
         */

        status = lpfc_reset_flush_io_context(vport, 0, 0, LPFC_CTX_HOST);
        if (status != SUCCESS)
                ret = FAILED;

        lpfc_printf_vlog(vport, KERN_ERR, LOG_FCP,
                         "0714 SCSI layer issued Bus Reset Data: x%x\n", ret);
        return ret;
}

/**
 * lpfc_slave_alloc - scsi_host_template slave_alloc entry point
 * @sdev: Pointer to scsi_device.
 *
 * This routine populates the cmds_per_lun count + 2 scsi_bufs into  this host's
 * globally available list of scsi buffers. This routine also makes sure scsi
 * buffer is not allocated more than HBA limit conveyed to midlayer. This list
 * of scsi buffer exists for the lifetime of the driver.
 *
 * Return codes:
 *   non-0 - Error
 *   0 - Success
 **/
static int
lpfc_slave_alloc(struct scsi_device *sdev)
{
        struct lpfc_vport *vport = (struct lpfc_vport *) sdev->host->hostdata;
        struct lpfc_hba   *phba = vport->phba;
        struct fc_rport *rport = starget_to_rport(scsi_target(sdev));
        uint32_t total = 0;
        uint32_t num_to_alloc = 0;
        int num_allocated = 0;

        if (!rport || fc_remote_port_chkready(rport))
                return -ENXIO;

        sdev->hostdata = rport->dd_data;

        /*
         * Populate the cmds_per_lun count scsi_bufs into this host's globally
         * available list of scsi buffers.  Don't allocate more than the
         * HBA limit conveyed to the midlayer via the host structure.  The
         * formula accounts for the lun_queue_depth + error handlers + 1
         * extra.  This list of scsi bufs exists for the lifetime of the driver.
         */
        total = phba->total_scsi_bufs;
        num_to_alloc = vport->cfg_lun_queue_depth + 2;

        /* Allow some exchanges to be available always to complete discovery */
        if (total >= phba->cfg_hba_queue_depth - LPFC_DISC_IOCB_BUFF_COUNT ) {
                lpfc_printf_vlog(vport, KERN_WARNING, LOG_FCP,
                                 "0704 At limitation of %d preallocated "
                                 "command buffers\n", total);
                return 0;
        /* Allow some exchanges to be available always to complete discovery */
        } else if (total + num_to_alloc >
                phba->cfg_hba_queue_depth - LPFC_DISC_IOCB_BUFF_COUNT ) {
                lpfc_printf_vlog(vport, KERN_WARNING, LOG_FCP,
                                 "0705 Allocation request of %d "
                                 "command buffers will exceed max of %d.  "
                                 "Reducing allocation request to %d.\n",
                                 num_to_alloc, phba->cfg_hba_queue_depth,
                                 (phba->cfg_hba_queue_depth - total));
                num_to_alloc = phba->cfg_hba_queue_depth - total;
        }
        num_allocated = lpfc_new_scsi_buf(vport, num_to_alloc);
        if (num_to_alloc != num_allocated) {
                        lpfc_printf_vlog(vport, KERN_WARNING, LOG_FCP,
                                 "0708 Allocation request of %d "
                                 "command buffers did not succeed.  "
                                 "Allocated %d buffers.\n",
                                 num_to_alloc, num_allocated);
        }
        return 0;
}

/**
 * lpfc_slave_configure - scsi_host_template slave_configure entry point
 * @sdev: Pointer to scsi_device.
 *
 * This routine configures following items
 *   - Tag command queuing support for @sdev if supported.
 *   - Dev loss time out value of fc_rport.
 *   - Enable SLI polling for fcp ring if ENABLE_FCP_RING_POLLING flag is set.
 *
 * Return codes:
 *   0 - Success
 **/
static int
lpfc_slave_configure(struct scsi_device *sdev)
{
        struct lpfc_vport *vport = (struct lpfc_vport *) sdev->host->hostdata;
        struct lpfc_hba   *phba = vport->phba;
        struct fc_rport   *rport = starget_to_rport(sdev->sdev_target);

        if (sdev->tagged_supported)
                scsi_activate_tcq(sdev, vport->cfg_lun_queue_depth);
        else
                scsi_deactivate_tcq(sdev, vport->cfg_lun_queue_depth);

        /*
         * Initialize the fc transport attributes for the target
         * containing this scsi device.  Also note that the driver's
         * target pointer is stored in the starget_data for the
         * driver's sysfs entry point functions.
         */
        rport->dev_loss_tmo = vport->cfg_devloss_tmo;

        if (phba->cfg_poll & ENABLE_FCP_RING_POLLING) {
                lpfc_sli_poll_fcp_ring(phba);
                if (phba->cfg_poll & DISABLE_FCP_RING_INT)
                        lpfc_poll_rearm_timer(phba);
        }

        return 0;
}

/**
 * lpfc_slave_destroy - slave_destroy entry point of SHT data structure
 * @sdev: Pointer to scsi_device.
 *
 * This routine sets @sdev hostatdata filed to null.
 **/
static void
lpfc_slave_destroy(struct scsi_device *sdev)
{
        sdev->hostdata = NULL;
        return;
}


struct scsi_host_template lpfc_template = {
        .module                 = THIS_MODULE,
        .name                   = LPFC_DRIVER_NAME,
        .info                   = lpfc_info,
        .queuecommand           = lpfc_queuecommand,
        .eh_abort_handler       = lpfc_abort_handler,
        .eh_device_reset_handler = lpfc_device_reset_handler,
        .eh_target_reset_handler = lpfc_target_reset_handler,
        .eh_bus_reset_handler   = lpfc_bus_reset_handler,
        .slave_alloc            = lpfc_slave_alloc,
        .slave_configure        = lpfc_slave_configure,
        .slave_destroy          = lpfc_slave_destroy,
        .scan_finished          = lpfc_scan_finished,
        .this_id                = -1,
        .sg_tablesize           = LPFC_DEFAULT_SG_SEG_CNT,
        .cmd_per_lun            = LPFC_CMD_PER_LUN,
        .use_clustering         = ENABLE_CLUSTERING,
        .shost_attrs            = lpfc_hba_attrs,
        .max_sectors            = 0xFFFF,
};

struct scsi_host_template lpfc_vport_template = {
        .module                 = THIS_MODULE,
        .name                   = LPFC_DRIVER_NAME,
        .info                   = lpfc_info,
        .queuecommand           = lpfc_queuecommand,
        .eh_abort_handler       = lpfc_abort_handler,
        .eh_device_reset_handler = lpfc_device_reset_handler,
        .eh_target_reset_handler = lpfc_target_reset_handler,
        .eh_bus_reset_handler   = lpfc_bus_reset_handler,
        .slave_alloc            = lpfc_slave_alloc,
        .slave_configure        = lpfc_slave_configure,
        .slave_destroy          = lpfc_slave_destroy,
        .scan_finished          = lpfc_scan_finished,
        .this_id                = -1,
        .sg_tablesize           = LPFC_DEFAULT_SG_SEG_CNT,
        .cmd_per_lun            = LPFC_CMD_PER_LUN,
        .use_clustering         = ENABLE_CLUSTERING,
        .shost_attrs            = lpfc_vport_attrs,
        .max_sectors            = 0xFFFF,
};