git.oblomov.eu Git - linux-2.6/blob - drivers/usb/storage/usb.c

   1 /* Driver for USB Mass Storage compliant devices
   2  *
   3  * $Id: usb.c,v 1.75 2002/04/22 03:39:43 mdharm Exp $
   4  *
   5  * Current development and maintenance by:
   6  *   (c) 1999-2003 Matthew Dharm (mdharm-usb@one-eyed-alien.net)
   7  *
   8  * Developed with the assistance of:
   9  *   (c) 2000 David L. Brown, Jr. (usb-storage@davidb.org)
  10  *   (c) 2003 Alan Stern (stern@rowland.harvard.edu)
  11  *
  12  * Initial work by:
  13  *   (c) 1999 Michael Gee (michael@linuxspecific.com)
  14  *
  15  * usb_device_id support by Adam J. Richter (adam@yggdrasil.com):
  16  *   (c) 2000 Yggdrasil Computing, Inc.
  17  *
  18  * This driver is based on the 'USB Mass Storage Class' document. This
  19  * describes in detail the protocol used to communicate with such
  20  * devices.  Clearly, the designers had SCSI and ATAPI commands in
  21  * mind when they created this document.  The commands are all very
  22  * similar to commands in the SCSI-II and ATAPI specifications.
  23  *
  24  * It is important to note that in a number of cases this class
  25  * exhibits class-specific exemptions from the USB specification.
  26  * Notably the usage of NAK, STALL and ACK differs from the norm, in
  27  * that they are used to communicate wait, failed and OK on commands.
  28  *
  29  * Also, for certain devices, the interrupt endpoint is used to convey
  30  * status of a command.
  31  *
  32  * Please see http://www.one-eyed-alien.net/~mdharm/linux-usb for more
  33  * information about this driver.
  34  *
  35  * This program is free software; you can redistribute it and/or modify it
  36  * under the terms of the GNU General Public License as published by the
  37  * Free Software Foundation; either version 2, or (at your option) any
  38  * later version.
  39  *
  40  * This program is distributed in the hope that it will be useful, but
  41  * WITHOUT ANY WARRANTY; without even the implied warranty of
  42  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
  43  * General Public License for more details.
  44  *
  45  * You should have received a copy of the GNU General Public License along
  46  * with this program; if not, write to the Free Software Foundation, Inc.,
  47  * 675 Mass Ave, Cambridge, MA 02139, USA.
  48  */
  49
  50 #include <linux/config.h>
  51 #include <linux/sched.h>
  52 #include <linux/errno.h>
  53 #include <linux/suspend.h>
  54 #include <linux/module.h>
  55 #include <linux/init.h>
  56 #include <linux/slab.h>
  57 #include <linux/kthread.h>
  58
  59 #include <scsi/scsi.h>
  60 #include <scsi/scsi_cmnd.h>
  61 #include <scsi/scsi_device.h>
  62
  63 #include "usb.h"
  64 #include "scsiglue.h"
  65 #include "transport.h"
  66 #include "protocol.h"
  67 #include "debug.h"
  68 #include "initializers.h"
  69
  70 #ifdef CONFIG_USB_STORAGE_USBAT
  71 #include "shuttle_usbat.h"
  72 #endif
  73 #ifdef CONFIG_USB_STORAGE_SDDR09
  74 #include "sddr09.h"
  75 #endif
  76 #ifdef CONFIG_USB_STORAGE_SDDR55
  77 #include "sddr55.h"
  78 #endif
  79 #ifdef CONFIG_USB_STORAGE_DPCM
  80 #include "dpcm.h"
  81 #endif
  82 #ifdef CONFIG_USB_STORAGE_FREECOM
  83 #include "freecom.h"
  84 #endif
  85 #ifdef CONFIG_USB_STORAGE_ISD200
  86 #include "isd200.h"
  87 #endif
  88 #ifdef CONFIG_USB_STORAGE_DATAFAB
  89 #include "datafab.h"
  90 #endif
  91 #ifdef CONFIG_USB_STORAGE_JUMPSHOT
  92 #include "jumpshot.h"
  93 #endif
  94 #ifdef CONFIG_USB_STORAGE_ONETOUCH
  95 #include "onetouch.h"
  96 #endif
  97
  98 /* Some informational data */
  99 MODULE_AUTHOR("Matthew Dharm <mdharm-usb@one-eyed-alien.net>");
 100 MODULE_DESCRIPTION("USB Mass Storage driver for Linux");
 101 MODULE_LICENSE("GPL");
 102
 103 static unsigned int delay_use = 5;
 104 module_param(delay_use, uint, S_IRUGO | S_IWUSR);
 105 MODULE_PARM_DESC(delay_use, "seconds to delay before using a new device");
 106
 107
 108 /* These are used to make sure the module doesn't unload before all the
 109  * threads have exited.
 110  */
 111 static atomic_t total_threads = ATOMIC_INIT(0);
 112 static DECLARE_COMPLETION(threads_gone);
 113
 114
 115 /* The entries in this table, except for final ones here
 116  * (USB_MASS_STORAGE_CLASS and the empty entry), correspond,
 117  * line for line with the entries of us_unsuaul_dev_list[].
 118  */
 119
 120 #define UNUSUAL_DEV(id_vendor, id_product, bcdDeviceMin, bcdDeviceMax, \
 121                     vendorName, productName,useProtocol, useTransport, \
 122                     initFunction, flags) \
 123 { USB_DEVICE_VER(id_vendor, id_product, bcdDeviceMin,bcdDeviceMax) }
 124
 125 static struct usb_device_id storage_usb_ids [] = {
 126
 127 #       include "unusual_devs.h"
 128 #undef UNUSUAL_DEV
 129         /* Control/Bulk transport for all SubClass values */
 130         { USB_INTERFACE_INFO(USB_CLASS_MASS_STORAGE, US_SC_RBC, US_PR_CB) },
 131         { USB_INTERFACE_INFO(USB_CLASS_MASS_STORAGE, US_SC_8020, US_PR_CB) },
 132         { USB_INTERFACE_INFO(USB_CLASS_MASS_STORAGE, US_SC_QIC, US_PR_CB) },
 133         { USB_INTERFACE_INFO(USB_CLASS_MASS_STORAGE, US_SC_UFI, US_PR_CB) },
 134         { USB_INTERFACE_INFO(USB_CLASS_MASS_STORAGE, US_SC_8070, US_PR_CB) },
 135         { USB_INTERFACE_INFO(USB_CLASS_MASS_STORAGE, US_SC_SCSI, US_PR_CB) },
 136
 137         /* Control/Bulk/Interrupt transport for all SubClass values */
 138         { USB_INTERFACE_INFO(USB_CLASS_MASS_STORAGE, US_SC_RBC, US_PR_CBI) },
 139         { USB_INTERFACE_INFO(USB_CLASS_MASS_STORAGE, US_SC_8020, US_PR_CBI) },
 140         { USB_INTERFACE_INFO(USB_CLASS_MASS_STORAGE, US_SC_QIC, US_PR_CBI) },
 141         { USB_INTERFACE_INFO(USB_CLASS_MASS_STORAGE, US_SC_UFI, US_PR_CBI) },
 142         { USB_INTERFACE_INFO(USB_CLASS_MASS_STORAGE, US_SC_8070, US_PR_CBI) },
 143         { USB_INTERFACE_INFO(USB_CLASS_MASS_STORAGE, US_SC_SCSI, US_PR_CBI) },
 144
 145         /* Bulk-only transport for all SubClass values */
 146         { USB_INTERFACE_INFO(USB_CLASS_MASS_STORAGE, US_SC_RBC, US_PR_BULK) },
 147         { USB_INTERFACE_INFO(USB_CLASS_MASS_STORAGE, US_SC_8020, US_PR_BULK) },
 148         { USB_INTERFACE_INFO(USB_CLASS_MASS_STORAGE, US_SC_QIC, US_PR_BULK) },
 149         { USB_INTERFACE_INFO(USB_CLASS_MASS_STORAGE, US_SC_UFI, US_PR_BULK) },
 150         { USB_INTERFACE_INFO(USB_CLASS_MASS_STORAGE, US_SC_8070, US_PR_BULK) },
 151         { USB_INTERFACE_INFO(USB_CLASS_MASS_STORAGE, US_SC_SCSI, US_PR_BULK) },
 152
 153         /* Terminating entry */
 154         { }
 155 };
 156
 157 MODULE_DEVICE_TABLE (usb, storage_usb_ids);
 158
 159 /* This is the list of devices we recognize, along with their flag data */
 160
 161 /* The vendor name should be kept at eight characters or less, and
 162  * the product name should be kept at 16 characters or less. If a device
 163  * has the US_FL_FIX_INQUIRY flag, then the vendor and product names
 164  * normally generated by a device thorugh the INQUIRY response will be
 165  * taken from this list, and this is the reason for the above size
 166  * restriction. However, if the flag is not present, then you
 167  * are free to use as many characters as you like.
 168  */
 169
 170 #undef UNUSUAL_DEV
 171 #define UNUSUAL_DEV(idVendor, idProduct, bcdDeviceMin, bcdDeviceMax, \
 172                     vendor_name, product_name, use_protocol, use_transport, \
 173                     init_function, Flags) \
 174 { \
 175         .vendorName = vendor_name,      \
 176         .productName = product_name,    \
 177         .useProtocol = use_protocol,    \
 178         .useTransport = use_transport,  \
 179         .initFunction = init_function,  \
 180         .flags = Flags, \
 181 }
 182
 183 static struct us_unusual_dev us_unusual_dev_list[] = {
 184 #       include "unusual_devs.h"
 185 #       undef UNUSUAL_DEV
 186         /* Control/Bulk transport for all SubClass values */
 187         { .useProtocol = US_SC_RBC,
 188           .useTransport = US_PR_CB},
 189         { .useProtocol = US_SC_8020,
 190           .useTransport = US_PR_CB},
 191         { .useProtocol = US_SC_QIC,
 192           .useTransport = US_PR_CB},
 193         { .useProtocol = US_SC_UFI,
 194           .useTransport = US_PR_CB},
 195         { .useProtocol = US_SC_8070,
 196           .useTransport = US_PR_CB},
 197         { .useProtocol = US_SC_SCSI,
 198           .useTransport = US_PR_CB},
 199
 200         /* Control/Bulk/Interrupt transport for all SubClass values */
 201         { .useProtocol = US_SC_RBC,
 202           .useTransport = US_PR_CBI},
 203         { .useProtocol = US_SC_8020,
 204           .useTransport = US_PR_CBI},
 205         { .useProtocol = US_SC_QIC,
 206           .useTransport = US_PR_CBI},
 207         { .useProtocol = US_SC_UFI,
 208           .useTransport = US_PR_CBI},
 209         { .useProtocol = US_SC_8070,
 210           .useTransport = US_PR_CBI},
 211         { .useProtocol = US_SC_SCSI,
 212           .useTransport = US_PR_CBI},
 213
 214         /* Bulk-only transport for all SubClass values */
 215         { .useProtocol = US_SC_RBC,
 216           .useTransport = US_PR_BULK},
 217         { .useProtocol = US_SC_8020,
 218           .useTransport = US_PR_BULK},
 219         { .useProtocol = US_SC_QIC,
 220           .useTransport = US_PR_BULK},
 221         { .useProtocol = US_SC_UFI,
 222           .useTransport = US_PR_BULK},
 223         { .useProtocol = US_SC_8070,
 224           .useTransport = US_PR_BULK},
 225         { .useProtocol = US_SC_SCSI,
 226           .useTransport = US_PR_BULK},
 227
 228         /* Terminating entry */
 229         { NULL }
 230 };
 231
 232
 233 #ifdef CONFIG_PM        /* Minimal support for suspend and resume */
 234
 235 static int storage_suspend(struct usb_interface *iface, pm_message_t message)
 236 {
 237         struct us_data *us = usb_get_intfdata(iface);
 238
 239         /* Wait until no command is running */
 240         down(&us->dev_semaphore);
 241
 242         US_DEBUGP("%s\n", __FUNCTION__);
 243         iface->dev.power.power_state.event = message.event;
 244
 245         /* When runtime PM is working, we'll set a flag to indicate
 246          * whether we should autoresume when a SCSI request arrives. */
 247
 248         up(&us->dev_semaphore);
 249         return 0;
 250 }
 251
 252 static int storage_resume(struct usb_interface *iface)
 253 {
 254         struct us_data *us = usb_get_intfdata(iface);
 255
 256         down(&us->dev_semaphore);
 257
 258         US_DEBUGP("%s\n", __FUNCTION__);
 259         iface->dev.power.power_state.event = PM_EVENT_ON;
 260
 261         up(&us->dev_semaphore);
 262         return 0;
 263 }
 264
 265 #endif /* CONFIG_PM */
 266
 267 /*
 268  * fill_inquiry_response takes an unsigned char array (which must
 269  * be at least 36 characters) and populates the vendor name,
 270  * product name, and revision fields. Then the array is copied
 271  * into the SCSI command's response buffer (oddly enough
 272  * called request_buffer). data_len contains the length of the
 273  * data array, which again must be at least 36.
 274  */
 275
 276 void fill_inquiry_response(struct us_data *us, unsigned char *data,
 277                 unsigned int data_len)
 278 {
 279         if (data_len<36) // You lose.
 280                 return;
 281
 282         if(data[0]&0x20) { /* USB device currently not connected. Return
 283                               peripheral qualifier 001b ("...however, the
 284                               physical device is not currently connected
 285                               to this logical unit") and leave vendor and
 286                               product identification empty. ("If the target
 287                               does store some of the INQUIRY data on the
 288                               device, it may return zeros or ASCII spaces
 289                               (20h) in those fields until the data is
 290                               available from the device."). */
 291                 memset(data+8,0,28);
 292         } else {
 293                 u16 bcdDevice = le16_to_cpu(us->pusb_dev->descriptor.bcdDevice);
 294                 memcpy(data+8, us->unusual_dev->vendorName,
 295                         strlen(us->unusual_dev->vendorName) > 8 ? 8 :
 296                         strlen(us->unusual_dev->vendorName));
 297                 memcpy(data+16, us->unusual_dev->productName,
 298                         strlen(us->unusual_dev->productName) > 16 ? 16 :
 299                         strlen(us->unusual_dev->productName));
 300                 data[32] = 0x30 + ((bcdDevice>>12) & 0x0F);
 301                 data[33] = 0x30 + ((bcdDevice>>8) & 0x0F);
 302                 data[34] = 0x30 + ((bcdDevice>>4) & 0x0F);
 303                 data[35] = 0x30 + ((bcdDevice) & 0x0F);
 304         }
 305
 306         usb_stor_set_xfer_buf(data, data_len, us->srb);
 307 }
 308
 309 static int usb_stor_control_thread(void * __us)
 310 {
 311         struct us_data *us = (struct us_data *)__us;
 312         struct Scsi_Host *host = us_to_host(us);
 313
 314         current->flags |= PF_NOFREEZE;
 315
 316         for(;;) {
 317                 US_DEBUGP("*** thread sleeping.\n");
 318                 if(down_interruptible(&us->sema))
 319                         break;
 320
 321                 US_DEBUGP("*** thread awakened.\n");
 322
 323                 /* lock the device pointers */
 324                 down(&(us->dev_semaphore));
 325
 326                 /* if the device has disconnected, we are free to exit */
 327                 if (test_bit(US_FLIDX_DISCONNECTING, &us->flags)) {
 328                         US_DEBUGP("-- exiting\n");
 329                         up(&(us->dev_semaphore));
 330                         break;
 331                 }
 332
 333                 /* lock access to the state */
 334                 scsi_lock(host);
 335
 336                 /* has the command timed out *already* ? */
 337                 if (test_bit(US_FLIDX_TIMED_OUT, &us->flags)) {
 338                         us->srb->result = DID_ABORT << 16;
 339                         goto SkipForAbort;
 340                 }
 341
 342                 scsi_unlock(host);
 343
 344                 /* reject the command if the direction indicator
 345                  * is UNKNOWN
 346                  */
 347                 if (us->srb->sc_data_direction == DMA_BIDIRECTIONAL) {
 348                         US_DEBUGP("UNKNOWN data direction\n");
 349                         us->srb->result = DID_ERROR << 16;
 350                 }
 351
 352                 /* reject if target != 0 or if LUN is higher than
 353                  * the maximum known LUN
 354                  */
 355                 else if (us->srb->device->id &&
 356                                 !(us->flags & US_FL_SCM_MULT_TARG)) {
 357                         US_DEBUGP("Bad target number (%d:%d)\n",
 358                                   us->srb->device->id, us->srb->device->lun);
 359                         us->srb->result = DID_BAD_TARGET << 16;
 360                 }
 361
 362                 else if (us->srb->device->lun > us->max_lun) {
 363                         US_DEBUGP("Bad LUN (%d:%d)\n",
 364                                   us->srb->device->id, us->srb->device->lun);
 365                         us->srb->result = DID_BAD_TARGET << 16;
 366                 }
 367
 368                 /* Handle those devices which need us to fake
 369                  * their inquiry data */
 370                 else if ((us->srb->cmnd[0] == INQUIRY) &&
 371                             (us->flags & US_FL_FIX_INQUIRY)) {
 372                         unsigned char data_ptr[36] = {
 373                             0x00, 0x80, 0x02, 0x02,
 374                             0x1F, 0x00, 0x00, 0x00};
 375
 376                         US_DEBUGP("Faking INQUIRY command\n");
 377                         fill_inquiry_response(us, data_ptr, 36);
 378                         us->srb->result = SAM_STAT_GOOD;
 379                 }
 380
 381                 /* we've got a command, let's do it! */
 382                 else {
 383                         US_DEBUG(usb_stor_show_command(us->srb));
 384                         us->proto_handler(us->srb, us);
 385                 }
 386
 387                 /* lock access to the state */
 388                 scsi_lock(host);
 389
 390                 /* indicate that the command is done */
 391                 if (us->srb->result != DID_ABORT << 16) {
 392                         US_DEBUGP("scsi cmd done, result=0x%x\n",
 393                                    us->srb->result);
 394                         us->srb->scsi_done(us->srb);
 395                 } else {
 396 SkipForAbort:
 397                         US_DEBUGP("scsi command aborted\n");
 398                 }
 399
 400                 /* If an abort request was received we need to signal that
 401                  * the abort has finished.  The proper test for this is
 402                  * the TIMED_OUT flag, not srb->result == DID_ABORT, because
 403                  * the timeout might have occurred after the command had
 404                  * already completed with a different result code. */
 405                 if (test_bit(US_FLIDX_TIMED_OUT, &us->flags)) {
 406                         complete(&(us->notify));
 407
 408                         /* Allow USB transfers to resume */
 409                         clear_bit(US_FLIDX_ABORTING, &us->flags);
 410                         clear_bit(US_FLIDX_TIMED_OUT, &us->flags);
 411                 }
 412
 413                 /* finished working on this command */
 414                 us->srb = NULL;
 415                 scsi_unlock(host);
 416
 417                 /* unlock the device pointers */
 418                 up(&(us->dev_semaphore));
 419         } /* for (;;) */
 420
 421         scsi_host_put(host);
 422
 423         /* notify the exit routine that we're actually exiting now
 424          *
 425          * complete()/wait_for_completion() is similar to up()/down(),
 426          * except that complete() is safe in the case where the structure
 427          * is getting deleted in a parallel mode of execution (i.e. just
 428          * after the down() -- that's necessary for the thread-shutdown
 429          * case.
 430          *
 431          * complete_and_exit() goes even further than this -- it is safe in
 432          * the case that the thread of the caller is going away (not just
 433          * the structure) -- this is necessary for the module-remove case.
 434          * This is important in preemption kernels, which transfer the flow
 435          * of execution immediately upon a complete().
 436          */
 437         complete_and_exit(&threads_gone, 0);
 438 }
 439
 440 /***********************************************************************
 441  * Device probing and disconnecting
 442  ***********************************************************************/
 443
 444 /* Associate our private data with the USB device */
 445 static int associate_dev(struct us_data *us, struct usb_interface *intf)
 446 {
 447         US_DEBUGP("-- %s\n", __FUNCTION__);
 448
 449         /* Fill in the device-related fields */
 450         us->pusb_dev = interface_to_usbdev(intf);
 451         us->pusb_intf = intf;
 452         us->ifnum = intf->cur_altsetting->desc.bInterfaceNumber;
 453         US_DEBUGP("Vendor: 0x%04x, Product: 0x%04x, Revision: 0x%04x\n",
 454                         le16_to_cpu(us->pusb_dev->descriptor.idVendor),
 455                         le16_to_cpu(us->pusb_dev->descriptor.idProduct),
 456                         le16_to_cpu(us->pusb_dev->descriptor.bcdDevice));
 457         US_DEBUGP("Interface Subclass: 0x%02x, Protocol: 0x%02x\n",
 458                         intf->cur_altsetting->desc.bInterfaceSubClass,
 459                         intf->cur_altsetting->desc.bInterfaceProtocol);
 460
 461         /* Store our private data in the interface */
 462         usb_set_intfdata(intf, us);
 463
 464         /* Allocate the device-related DMA-mapped buffers */
 465         us->cr = usb_buffer_alloc(us->pusb_dev, sizeof(*us->cr),
 466                         GFP_KERNEL, &us->cr_dma);
 467         if (!us->cr) {
 468                 US_DEBUGP("usb_ctrlrequest allocation failed\n");
 469                 return -ENOMEM;
 470         }
 471
 472         us->iobuf = usb_buffer_alloc(us->pusb_dev, US_IOBUF_SIZE,
 473                         GFP_KERNEL, &us->iobuf_dma);
 474         if (!us->iobuf) {
 475                 US_DEBUGP("I/O buffer allocation failed\n");
 476                 return -ENOMEM;
 477         }
 478
 479         us->sensebuf = kmalloc(US_SENSE_SIZE, GFP_KERNEL);
 480         if (!us->sensebuf) {
 481                 US_DEBUGP("Sense buffer allocation failed\n");
 482                 return -ENOMEM;
 483         }
 484         return 0;
 485 }
 486
 487 /* Get the unusual_devs entries and the string descriptors */
 488 static void get_device_info(struct us_data *us, int id_index)
 489 {
 490         struct usb_device *dev = us->pusb_dev;
 491         struct usb_interface_descriptor *idesc =
 492                 &us->pusb_intf->cur_altsetting->desc;
 493         struct us_unusual_dev *unusual_dev = &us_unusual_dev_list[id_index];
 494         struct usb_device_id *id = &storage_usb_ids[id_index];
 495
 496         /* Store the entries */
 497         us->unusual_dev = unusual_dev;
 498         us->subclass = (unusual_dev->useProtocol == US_SC_DEVICE) ?
 499                         idesc->bInterfaceSubClass :
 500                         unusual_dev->useProtocol;
 501         us->protocol = (unusual_dev->useTransport == US_PR_DEVICE) ?
 502                         idesc->bInterfaceProtocol :
 503                         unusual_dev->useTransport;
 504         us->flags = unusual_dev->flags;
 505
 506         /*
 507          * This flag is only needed when we're in high-speed, so let's
 508          * disable it if we're in full-speed
 509          */
 510         if (dev->speed != USB_SPEED_HIGH)
 511                 us->flags &= ~US_FL_GO_SLOW;
 512
 513         /* Log a message if a non-generic unusual_dev entry contains an
 514          * unnecessary subclass or protocol override.  This may stimulate
 515          * reports from users that will help us remove unneeded entries
 516          * from the unusual_devs.h table.
 517          */
 518         if (id->idVendor || id->idProduct) {
 519                 static char *msgs[3] = {
 520                         "an unneeded SubClass entry",
 521                         "an unneeded Protocol entry",
 522                         "unneeded SubClass and Protocol entries"};
 523                 struct usb_device_descriptor *ddesc = &dev->descriptor;
 524                 int msg = -1;
 525
 526                 if (unusual_dev->useProtocol != US_SC_DEVICE &&
 527                         us->subclass == idesc->bInterfaceSubClass)
 528                         msg += 1;
 529                 if (unusual_dev->useTransport != US_PR_DEVICE &&
 530                         us->protocol == idesc->bInterfaceProtocol)
 531                         msg += 2;
 532                 if (msg >= 0 && !(unusual_dev->flags & US_FL_NEED_OVERRIDE))
 533                         printk(KERN_NOTICE USB_STORAGE "This device "
 534                                 "(%04x,%04x,%04x S %02x P %02x)"
 535                                 " has %s in unusual_devs.h\n"
 536                                 "   Please send a copy of this message to "
 537                                 "<linux-usb-devel@lists.sourceforge.net>\n",
 538                                 le16_to_cpu(ddesc->idVendor),
 539                                 le16_to_cpu(ddesc->idProduct),
 540                                 le16_to_cpu(ddesc->bcdDevice),
 541                                 idesc->bInterfaceSubClass,
 542                                 idesc->bInterfaceProtocol,
 543                                 msgs[msg]);
 544         }
 545 }
 546
 547 /* Get the transport settings */
 548 static int get_transport(struct us_data *us)
 549 {
 550         switch (us->protocol) {
 551         case US_PR_CB:
 552                 us->transport_name = "Control/Bulk";
 553                 us->transport = usb_stor_CB_transport;
 554                 us->transport_reset = usb_stor_CB_reset;
 555                 us->max_lun = 7;
 556                 break;
 557
 558         case US_PR_CBI:
 559                 us->transport_name = "Control/Bulk/Interrupt";
 560                 us->transport = usb_stor_CBI_transport;
 561                 us->transport_reset = usb_stor_CB_reset;
 562                 us->max_lun = 7;
 563                 break;
 564
 565         case US_PR_BULK:
 566                 us->transport_name = "Bulk";
 567                 us->transport = usb_stor_Bulk_transport;
 568                 us->transport_reset = usb_stor_Bulk_reset;
 569                 break;
 570
 571 #ifdef CONFIG_USB_STORAGE_USBAT
 572         case US_PR_USBAT:
 573                 us->transport_name = "Shuttle USBAT";
 574                 us->transport = usbat_transport;
 575                 us->transport_reset = usb_stor_CB_reset;
 576                 us->max_lun = 1;
 577                 break;
 578 #endif
 579
 580 #ifdef CONFIG_USB_STORAGE_SDDR09
 581         case US_PR_EUSB_SDDR09:
 582                 us->transport_name = "EUSB/SDDR09";
 583                 us->transport = sddr09_transport;
 584                 us->transport_reset = usb_stor_CB_reset;
 585                 us->max_lun = 0;
 586                 break;
 587 #endif
 588
 589 #ifdef CONFIG_USB_STORAGE_SDDR55
 590         case US_PR_SDDR55:
 591                 us->transport_name = "SDDR55";
 592                 us->transport = sddr55_transport;
 593                 us->transport_reset = sddr55_reset;
 594                 us->max_lun = 0;
 595                 break;
 596 #endif
 597
 598 #ifdef CONFIG_USB_STORAGE_DPCM
 599         case US_PR_DPCM_USB:
 600                 us->transport_name = "Control/Bulk-EUSB/SDDR09";
 601                 us->transport = dpcm_transport;
 602                 us->transport_reset = usb_stor_CB_reset;
 603                 us->max_lun = 1;
 604                 break;
 605 #endif
 606
 607 #ifdef CONFIG_USB_STORAGE_FREECOM
 608         case US_PR_FREECOM:
 609                 us->transport_name = "Freecom";
 610                 us->transport = freecom_transport;
 611                 us->transport_reset = usb_stor_freecom_reset;
 612                 us->max_lun = 0;
 613                 break;
 614 #endif
 615
 616 #ifdef CONFIG_USB_STORAGE_DATAFAB
 617         case US_PR_DATAFAB:
 618                 us->transport_name  = "Datafab Bulk-Only";
 619                 us->transport = datafab_transport;
 620                 us->transport_reset = usb_stor_Bulk_reset;
 621                 us->max_lun = 1;
 622                 break;
 623 #endif
 624
 625 #ifdef CONFIG_USB_STORAGE_JUMPSHOT
 626         case US_PR_JUMPSHOT:
 627                 us->transport_name  = "Lexar Jumpshot Control/Bulk";
 628                 us->transport = jumpshot_transport;
 629                 us->transport_reset = usb_stor_Bulk_reset;
 630                 us->max_lun = 1;
 631                 break;
 632 #endif
 633
 634         default:
 635                 return -EIO;
 636         }
 637         US_DEBUGP("Transport: %s\n", us->transport_name);
 638
 639         /* fix for single-lun devices */
 640         if (us->flags & US_FL_SINGLE_LUN)
 641                 us->max_lun = 0;
 642         return 0;
 643 }
 644
 645 /* Get the protocol settings */
 646 static int get_protocol(struct us_data *us)
 647 {
 648         switch (us->subclass) {
 649         case US_SC_RBC:
 650                 us->protocol_name = "Reduced Block Commands (RBC)";
 651                 us->proto_handler = usb_stor_transparent_scsi_command;
 652                 break;
 653
 654         case US_SC_8020:
 655                 us->protocol_name = "8020i";
 656                 us->proto_handler = usb_stor_ATAPI_command;
 657                 us->max_lun = 0;
 658                 break;
 659
 660         case US_SC_QIC:
 661                 us->protocol_name = "QIC-157";
 662                 us->proto_handler = usb_stor_qic157_command;
 663                 us->max_lun = 0;
 664                 break;
 665
 666         case US_SC_8070:
 667                 us->protocol_name = "8070i";
 668                 us->proto_handler = usb_stor_ATAPI_command;
 669                 us->max_lun = 0;
 670                 break;
 671
 672         case US_SC_SCSI:
 673                 us->protocol_name = "Transparent SCSI";
 674                 us->proto_handler = usb_stor_transparent_scsi_command;
 675                 break;
 676
 677         case US_SC_UFI:
 678                 us->protocol_name = "Uniform Floppy Interface (UFI)";
 679                 us->proto_handler = usb_stor_ufi_command;
 680                 break;
 681
 682 #ifdef CONFIG_USB_STORAGE_ISD200
 683         case US_SC_ISD200:
 684                 us->protocol_name = "ISD200 ATA/ATAPI";
 685                 us->proto_handler = isd200_ata_command;
 686                 break;
 687 #endif
 688
 689         default:
 690                 return -EIO;
 691         }
 692         US_DEBUGP("Protocol: %s\n", us->protocol_name);
 693         return 0;
 694 }
 695
 696 /* Get the pipe settings */
 697 static int get_pipes(struct us_data *us)
 698 {
 699         struct usb_host_interface *altsetting =
 700                 us->pusb_intf->cur_altsetting;
 701         int i;
 702         struct usb_endpoint_descriptor *ep;
 703         struct usb_endpoint_descriptor *ep_in = NULL;
 704         struct usb_endpoint_descriptor *ep_out = NULL;
 705         struct usb_endpoint_descriptor *ep_int = NULL;
 706
 707         /*
 708          * Find the endpoints we need.
 709          * We are expecting a minimum of 2 endpoints - in and out (bulk).
 710          * An optional interrupt is OK (necessary for CBI protocol).
 711          * We will ignore any others.
 712          */
 713         for (i = 0; i < altsetting->desc.bNumEndpoints; i++) {
 714                 ep = &altsetting->endpoint[i].desc;
 715
 716                 /* Is it a BULK endpoint? */
 717                 if ((ep->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK)
 718                                 == USB_ENDPOINT_XFER_BULK) {
 719                         /* BULK in or out? */
 720                         if (ep->bEndpointAddress & USB_DIR_IN)
 721                                 ep_in = ep;
 722                         else
 723                                 ep_out = ep;
 724                 }
 725
 726                 /* Is it an interrupt endpoint? */
 727                 else if ((ep->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK)
 728                                 == USB_ENDPOINT_XFER_INT) {
 729                         ep_int = ep;
 730                 }
 731         }
 732
 733         if (!ep_in || !ep_out || (us->protocol == US_PR_CBI && !ep_int)) {
 734                 US_DEBUGP("Endpoint sanity check failed! Rejecting dev.\n");
 735                 return -EIO;
 736         }
 737
 738         /* Calculate and store the pipe values */
 739         us->send_ctrl_pipe = usb_sndctrlpipe(us->pusb_dev, 0);
 740         us->recv_ctrl_pipe = usb_rcvctrlpipe(us->pusb_dev, 0);
 741         us->send_bulk_pipe = usb_sndbulkpipe(us->pusb_dev,
 742                 ep_out->bEndpointAddress & USB_ENDPOINT_NUMBER_MASK);
 743         us->recv_bulk_pipe = usb_rcvbulkpipe(us->pusb_dev,
 744                 ep_in->bEndpointAddress & USB_ENDPOINT_NUMBER_MASK);
 745         if (ep_int) {
 746                 us->recv_intr_pipe = usb_rcvintpipe(us->pusb_dev,
 747                         ep_int->bEndpointAddress & USB_ENDPOINT_NUMBER_MASK);
 748                 us->ep_bInterval = ep_int->bInterval;
 749         }
 750         return 0;
 751 }
 752
 753 /* Initialize all the dynamic resources we need */
 754 static int usb_stor_acquire_resources(struct us_data *us)
 755 {
 756         int p;
 757         struct task_struct *th;
 758
 759         us->current_urb = usb_alloc_urb(0, GFP_KERNEL);
 760         if (!us->current_urb) {
 761                 US_DEBUGP("URB allocation failed\n");
 762                 return -ENOMEM;
 763         }
 764
 765         /* Just before we start our control thread, initialize
 766          * the device if it needs initialization */
 767         if (us->unusual_dev->initFunction) {
 768                 p = us->unusual_dev->initFunction(us);
 769                 if (p)
 770                         return p;
 771         }
 772
 773         /* Start up our control thread */
 774         th = kthread_create(usb_stor_control_thread, us, "usb-storage");
 775         if (IS_ERR(th)) {
 776                 printk(KERN_WARNING USB_STORAGE
 777                        "Unable to start control thread\n");
 778                 return PTR_ERR(th);
 779         }
 780
 781         /* Take a reference to the host for the control thread and
 782          * count it among all the threads we have launched.  Then
 783          * start it up. */
 784         scsi_host_get(us_to_host(us));
 785         atomic_inc(&total_threads);
 786         wake_up_process(th);
 787
 788         return 0;
 789 }
 790
 791 /* Release all our dynamic resources */
 792 static void usb_stor_release_resources(struct us_data *us)
 793 {
 794         US_DEBUGP("-- %s\n", __FUNCTION__);
 795
 796         /* Tell the control thread to exit.  The SCSI host must
 797          * already have been removed so it won't try to queue
 798          * any more commands.
 799          */
 800         US_DEBUGP("-- sending exit command to thread\n");
 801         set_bit(US_FLIDX_DISCONNECTING, &us->flags);
 802         up(&us->sema);
 803
 804         /* Call the destructor routine, if it exists */
 805         if (us->extra_destructor) {
 806                 US_DEBUGP("-- calling extra_destructor()\n");
 807                 us->extra_destructor(us->extra);
 808         }
 809
 810         /* Free the extra data and the URB */
 811         kfree(us->extra);
 812         usb_free_urb(us->current_urb);
 813 }
 814
 815 /* Dissociate from the USB device */
 816 static void dissociate_dev(struct us_data *us)
 817 {
 818         US_DEBUGP("-- %s\n", __FUNCTION__);
 819
 820         kfree(us->sensebuf);
 821
 822         /* Free the device-related DMA-mapped buffers */
 823         if (us->cr)
 824                 usb_buffer_free(us->pusb_dev, sizeof(*us->cr), us->cr,
 825                                 us->cr_dma);
 826         if (us->iobuf)
 827                 usb_buffer_free(us->pusb_dev, US_IOBUF_SIZE, us->iobuf,
 828                                 us->iobuf_dma);
 829
 830         /* Remove our private data from the interface */
 831         usb_set_intfdata(us->pusb_intf, NULL);
 832 }
 833
 834 /* First stage of disconnect processing: stop all commands and remove
 835  * the host */
 836 static void quiesce_and_remove_host(struct us_data *us)
 837 {
 838         /* Prevent new USB transfers, stop the current command, and
 839          * interrupt a SCSI-scan or device-reset delay */
 840         set_bit(US_FLIDX_DISCONNECTING, &us->flags);
 841         usb_stor_stop_transport(us);
 842         wake_up(&us->delay_wait);
 843
 844         /* It doesn't matter if the SCSI-scanning thread is still running.
 845          * The thread will exit when it sees the DISCONNECTING flag. */
 846
 847         /* Wait for the current command to finish, then remove the host */
 848         down(&us->dev_semaphore);
 849         up(&us->dev_semaphore);
 850
 851         /* queuecommand won't accept any new commands and the control
 852          * thread won't execute a previously-queued command.  If there
 853          * is such a command pending, complete it with an error. */
 854         if (us->srb) {
 855                 us->srb->result = DID_NO_CONNECT << 16;
 856                 scsi_lock(us_to_host(us));
 857                 us->srb->scsi_done(us->srb);
 858                 us->srb = NULL;
 859                 scsi_unlock(us_to_host(us));
 860         }
 861
 862         /* Now we own no commands so it's safe to remove the SCSI host */
 863         scsi_remove_host(us_to_host(us));
 864 }
 865
 866 /* Second stage of disconnect processing: deallocate all resources */
 867 static void release_everything(struct us_data *us)
 868 {
 869         usb_stor_release_resources(us);
 870         dissociate_dev(us);
 871
 872         /* Drop our reference to the host; the SCSI core will free it
 873          * (and "us" along with it) when the refcount becomes 0. */
 874         scsi_host_put(us_to_host(us));
 875 }
 876
 877 /* Thread to carry out delayed SCSI-device scanning */
 878 static int usb_stor_scan_thread(void * __us)
 879 {
 880         struct us_data *us = (struct us_data *)__us;
 881
 882         printk(KERN_DEBUG
 883                 "usb-storage: device found at %d\n", us->pusb_dev->devnum);
 884
 885         /* Wait for the timeout to expire or for a disconnect */
 886         if (delay_use > 0) {
 887                 printk(KERN_DEBUG "usb-storage: waiting for device "
 888                                 "to settle before scanning\n");
 889 retry:
 890                 wait_event_interruptible_timeout(us->delay_wait,
 891                                 test_bit(US_FLIDX_DISCONNECTING, &us->flags),
 892                                 delay_use * HZ);
 893                 if (try_to_freeze())
 894                         goto retry;
 895         }
 896
 897         /* If the device is still connected, perform the scanning */
 898         if (!test_bit(US_FLIDX_DISCONNECTING, &us->flags)) {
 899
 900                 /* For bulk-only devices, determine the max LUN value */
 901                 if (us->protocol == US_PR_BULK &&
 902                                 !(us->flags & US_FL_SINGLE_LUN)) {
 903                         down(&us->dev_semaphore);
 904                         us->max_lun = usb_stor_Bulk_max_lun(us);
 905                         up(&us->dev_semaphore);
 906                 }
 907                 scsi_scan_host(us_to_host(us));
 908                 printk(KERN_DEBUG "usb-storage: device scan complete\n");
 909
 910                 /* Should we unbind if no devices were detected? */
 911         }
 912
 913         scsi_host_put(us_to_host(us));
 914         complete_and_exit(&threads_gone, 0);
 915 }
 916
 917
 918 /* Probe to see if we can drive a newly-connected USB device */
 919 static int storage_probe(struct usb_interface *intf,
 920                          const struct usb_device_id *id)
 921 {
 922         struct Scsi_Host *host;
 923         struct us_data *us;
 924         const int id_index = id - storage_usb_ids;
 925         int result;
 926         struct task_struct *th;
 927
 928         US_DEBUGP("USB Mass Storage device detected\n");
 929
 930         /*
 931          * Ask the SCSI layer to allocate a host structure, with extra
 932          * space at the end for our private us_data structure.
 933          */
 934         host = scsi_host_alloc(&usb_stor_host_template, sizeof(*us));
 935         if (!host) {
 936                 printk(KERN_WARNING USB_STORAGE
 937                         "Unable to allocate the scsi host\n");
 938                 return -ENOMEM;
 939         }
 940
 941         us = host_to_us(host);
 942         memset(us, 0, sizeof(struct us_data));
 943         init_MUTEX(&(us->dev_semaphore));
 944         init_MUTEX_LOCKED(&(us->sema));
 945         init_completion(&(us->notify));
 946         init_waitqueue_head(&us->delay_wait);
 947
 948         /* Associate the us_data structure with the USB device */
 949         result = associate_dev(us, intf);
 950         if (result)
 951                 goto BadDevice;
 952
 953         /*
 954          * Get the unusual_devs entries and the descriptors
 955          *
 956          * id_index is calculated in the declaration to be the index number
 957          * of the match from the usb_device_id table, so we can find the
 958          * corresponding entry in the private table.
 959          */
 960         get_device_info(us, id_index);
 961
 962 #ifdef CONFIG_USB_STORAGE_SDDR09
 963         if (us->protocol == US_PR_EUSB_SDDR09 ||
 964                         us->protocol == US_PR_DPCM_USB) {
 965                 /* set the configuration -- STALL is an acceptable response here */
 966                 if (us->pusb_dev->actconfig->desc.bConfigurationValue != 1) {
 967                         US_DEBUGP("active config #%d != 1 ??\n", us->pusb_dev
 968                                 ->actconfig->desc.bConfigurationValue);
 969                         goto BadDevice;
 970                 }
 971                 result = usb_reset_configuration(us->pusb_dev);
 972
 973                 US_DEBUGP("Result of usb_reset_configuration is %d\n", result);
 974                 if (result == -EPIPE) {
 975                         US_DEBUGP("-- stall on control interface\n");
 976                 } else if (result != 0) {
 977                         /* it's not a stall, but another error -- time to bail */
 978                         US_DEBUGP("-- Unknown error.  Rejecting device\n");
 979                         goto BadDevice;
 980                 }
 981         }
 982 #endif
 983
 984         /* Get the transport, protocol, and pipe settings */
 985         result = get_transport(us);
 986         if (result)
 987                 goto BadDevice;
 988         result = get_protocol(us);
 989         if (result)
 990                 goto BadDevice;
 991         result = get_pipes(us);
 992         if (result)
 993                 goto BadDevice;
 994
 995         /* Acquire all the other resources and add the host */
 996         result = usb_stor_acquire_resources(us);
 997         if (result)
 998                 goto BadDevice;
 999         result = scsi_add_host(host, &intf->dev);
1000         if (result) {
1001                 printk(KERN_WARNING USB_STORAGE
1002                         "Unable to add the scsi host\n");
1003                 goto BadDevice;
1004         }
1005
1006         /* Start up the thread for delayed SCSI-device scanning */
1007         th = kthread_create(usb_stor_scan_thread, us, "usb-stor-scan");
1008         if (IS_ERR(th)) {
1009                 printk(KERN_WARNING USB_STORAGE
1010                        "Unable to start the device-scanning thread\n");
1011                 quiesce_and_remove_host(us);
1012                 result = PTR_ERR(th);
1013                 goto BadDevice;
1014         }
1015
1016         /* Take a reference to the host for the scanning thread and
1017          * count it among all the threads we have launched.  Then
1018          * start it up. */
1019         scsi_host_get(us_to_host(us));
1020         atomic_inc(&total_threads);
1021         wake_up_process(th);
1022
1023         return 0;
1024
1025         /* We come here if there are any problems */
1026 BadDevice:
1027         US_DEBUGP("storage_probe() failed\n");
1028         release_everything(us);
1029         return result;
1030 }
1031
1032 /* Handle a disconnect event from the USB core */
1033 static void storage_disconnect(struct usb_interface *intf)
1034 {
1035         struct us_data *us = usb_get_intfdata(intf);
1036
1037         US_DEBUGP("storage_disconnect() called\n");
1038         quiesce_and_remove_host(us);
1039         release_everything(us);
1040 }
1041
1042 /***********************************************************************
1043  * Initialization and registration
1044  ***********************************************************************/
1045
1046 static struct usb_driver usb_storage_driver = {
1047         .owner =        THIS_MODULE,
1048         .name =         "usb-storage",
1049         .probe =        storage_probe,
1050         .disconnect =   storage_disconnect,
1051 #ifdef CONFIG_PM
1052         .suspend =      storage_suspend,
1053         .resume =       storage_resume,
1054 #endif
1055         .id_table =     storage_usb_ids,
1056 };
1057
1058 static int __init usb_stor_init(void)
1059 {
1060         int retval;
1061         printk(KERN_INFO "Initializing USB Mass Storage driver...\n");
1062
1063         /* register the driver, return usb_register return code if error */
1064         retval = usb_register(&usb_storage_driver);
1065         if (retval == 0)
1066                 printk(KERN_INFO "USB Mass Storage support registered.\n");
1067
1068         return retval;
1069 }
1070
1071 static void __exit usb_stor_exit(void)
1072 {
1073         US_DEBUGP("usb_stor_exit() called\n");
1074
1075         /* Deregister the driver
1076          * This will cause disconnect() to be called for each
1077          * attached unit
1078          */
1079         US_DEBUGP("-- calling usb_deregister()\n");
1080         usb_deregister(&usb_storage_driver) ;
1081
1082         /* Don't return until all of our control and scanning threads
1083          * have exited.  Since each thread signals threads_gone as its
1084          * last act, we have to call wait_for_completion the right number
1085          * of times.
1086          */
1087         while (atomic_read(&total_threads) > 0) {
1088                 wait_for_completion(&threads_gone);
1089                 atomic_dec(&total_threads);
1090         }
1091 }
1092
1093 module_init(usb_stor_init);
1094 module_exit(usb_stor_exit);