1 /* sun3lance.c: Ethernet driver for SUN3 Lance chip */
4 Sun3 Lance ethernet driver, by Sam Creasey (sammy@users.qual.net).
5 This driver is a part of the linux kernel, and is thus distributed
6 under the GNU General Public License.
8 The values used in LANCE_OBIO and LANCE_IRQ seem to be empirically
9 true for the correct IRQ and address of the lance registers. They
10 have not been widely tested, however. What we probably need is a
11 "proper" way to search for a device in the sun3's prom, but, alas,
12 linux has no such thing.
14 This driver is largely based on atarilance.c, by Roman Hodek. Other
15 sources of inspiration were the NetBSD sun3 am7990 driver, and the
16 linux sparc lance driver (sunlance.c).
18 There are more assumptions made throughout this driver, it almost
19 certainly still needs work, but it does work at least for RARP/BOOTP and
20 mounting the root NFS filesystem.
24 static char *version = "sun3lance.c: v1.2 1/12/2001 Sam Creasey (sammy@sammy.net)\n";
26 #include <linux/module.h>
27 #include <linux/stddef.h>
28 #include <linux/kernel.h>
29 #include <linux/string.h>
30 #include <linux/errno.h>
31 #include <linux/slab.h>
32 #include <linux/interrupt.h>
33 #include <linux/init.h>
34 #include <linux/ioport.h>
35 #include <linux/delay.h>
36 #include <linux/netdevice.h>
37 #include <linux/etherdevice.h>
38 #include <linux/skbuff.h>
39 #include <linux/bitops.h>
41 #include <asm/cacheflush.h>
42 #include <asm/setup.h>
45 #include <asm/pgtable.h>
47 #include <asm/idprom.h>
48 #include <asm/machines.h>
51 #include <asm/sun3mmu.h>
53 #include <asm/sun3xprom.h>
56 /* sun3/60 addr/irq for the lance chip. If your sun is different,
58 #define LANCE_OBIO 0x120000
59 #define LANCE_IRQ IRQ_AUTO_3
62 * 0 = silent, print only serious errors
63 * 1 = normal, print error messages
64 * 2 = debug, print debug infos
65 * 3 = debug, print even more debug infos (packet data)
71 static int lance_debug = LANCE_DEBUG;
73 static int lance_debug = 1;
75 module_param(lance_debug, int, 0);
76 MODULE_PARM_DESC(lance_debug, "SUN3 Lance debug level (0-3)");
77 MODULE_LICENSE("GPL");
79 #define DPRINTK(n,a) \
81 if (lance_debug >= n) \
86 /* we're only using 32k of memory, so we use 4 TX
87 buffers and 16 RX buffers. These values are expressed as log2. */
89 #define TX_LOG_RING_SIZE 3
90 #define RX_LOG_RING_SIZE 5
92 /* These are the derived values */
94 #define TX_RING_SIZE (1 << TX_LOG_RING_SIZE)
95 #define TX_RING_LEN_BITS (TX_LOG_RING_SIZE << 5)
96 #define TX_RING_MOD_MASK (TX_RING_SIZE - 1)
98 #define RX_RING_SIZE (1 << RX_LOG_RING_SIZE)
99 #define RX_RING_LEN_BITS (RX_LOG_RING_SIZE << 5)
100 #define RX_RING_MOD_MASK (RX_RING_SIZE - 1)
102 /* Definitions for packet buffer access: */
103 #define PKT_BUF_SZ 1544
105 /* Get the address of a packet buffer corresponding to a given buffer head */
106 #define PKTBUF_ADDR(head) (void *)((unsigned long)(MEM) | (head)->base)
109 /* The LANCE Rx and Tx ring descriptors. */
110 struct lance_rx_head {
111 unsigned short base; /* Low word of base addr */
112 volatile unsigned char flag;
113 unsigned char base_hi; /* High word of base addr (unused) */
114 short buf_length; /* This length is 2s complement! */
115 volatile short msg_length; /* This length is "normal". */
118 struct lance_tx_head {
119 unsigned short base; /* Low word of base addr */
120 volatile unsigned char flag;
121 unsigned char base_hi; /* High word of base addr (unused) */
122 short length; /* Length is 2s complement! */
126 /* The LANCE initialization block, described in databook. */
127 struct lance_init_block {
128 unsigned short mode; /* Pre-set mode */
129 unsigned char hwaddr[6]; /* Physical ethernet address */
130 unsigned int filter[2]; /* Multicast filter (unused). */
131 /* Receive and transmit ring base, along with length bits. */
136 unsigned short pad[4]; /* is thie needed? */
139 /* The whole layout of the Lance shared memory */
140 struct lance_memory {
141 struct lance_init_block init;
142 struct lance_tx_head tx_head[TX_RING_SIZE];
143 struct lance_rx_head rx_head[RX_RING_SIZE];
144 char rx_data[RX_RING_SIZE][PKT_BUF_SZ];
145 char tx_data[TX_RING_SIZE][PKT_BUF_SZ];
148 /* The driver's private device structure */
150 struct lance_private {
151 volatile unsigned short *iobase;
152 struct lance_memory *mem;
153 int new_rx, new_tx; /* The next free ring entry */
154 int old_tx, old_rx; /* ring entry to be processed */
155 /* These two must be longs for set_bit() */
160 /* I/O register access macros */
163 #define DREG lp->iobase[0]
164 #define AREG lp->iobase[1]
165 #define REGA(a) (*( AREG = (a), &DREG ))
167 /* Definitions for the Lance */
170 #define TMD1_ENP 0x01 /* end of packet */
171 #define TMD1_STP 0x02 /* start of packet */
172 #define TMD1_DEF 0x04 /* deferred */
173 #define TMD1_ONE 0x08 /* one retry needed */
174 #define TMD1_MORE 0x10 /* more than one retry needed */
175 #define TMD1_ERR 0x40 /* error summary */
176 #define TMD1_OWN 0x80 /* ownership (set: chip owns) */
178 #define TMD1_OWN_CHIP TMD1_OWN
179 #define TMD1_OWN_HOST 0
181 /* tx_head misc field */
182 #define TMD3_TDR 0x03FF /* Time Domain Reflectometry counter */
183 #define TMD3_RTRY 0x0400 /* failed after 16 retries */
184 #define TMD3_LCAR 0x0800 /* carrier lost */
185 #define TMD3_LCOL 0x1000 /* late collision */
186 #define TMD3_UFLO 0x4000 /* underflow (late memory) */
187 #define TMD3_BUFF 0x8000 /* buffering error (no ENP) */
190 #define RMD1_ENP 0x01 /* end of packet */
191 #define RMD1_STP 0x02 /* start of packet */
192 #define RMD1_BUFF 0x04 /* buffer error */
193 #define RMD1_CRC 0x08 /* CRC error */
194 #define RMD1_OFLO 0x10 /* overflow */
195 #define RMD1_FRAM 0x20 /* framing error */
196 #define RMD1_ERR 0x40 /* error summary */
197 #define RMD1_OWN 0x80 /* ownership (set: ship owns) */
199 #define RMD1_OWN_CHIP RMD1_OWN
200 #define RMD1_OWN_HOST 0
203 #define CSR0 0 /* mode/status */
204 #define CSR1 1 /* init block addr (low) */
205 #define CSR2 2 /* init block addr (high) */
206 #define CSR3 3 /* misc */
207 #define CSR8 8 /* address filter */
208 #define CSR15 15 /* promiscuous mode */
211 /* (R=readable, W=writeable, S=set on write, C=clear on write) */
212 #define CSR0_INIT 0x0001 /* initialize (RS) */
213 #define CSR0_STRT 0x0002 /* start (RS) */
214 #define CSR0_STOP 0x0004 /* stop (RS) */
215 #define CSR0_TDMD 0x0008 /* transmit demand (RS) */
216 #define CSR0_TXON 0x0010 /* transmitter on (R) */
217 #define CSR0_RXON 0x0020 /* receiver on (R) */
218 #define CSR0_INEA 0x0040 /* interrupt enable (RW) */
219 #define CSR0_INTR 0x0080 /* interrupt active (R) */
220 #define CSR0_IDON 0x0100 /* initialization done (RC) */
221 #define CSR0_TINT 0x0200 /* transmitter interrupt (RC) */
222 #define CSR0_RINT 0x0400 /* receiver interrupt (RC) */
223 #define CSR0_MERR 0x0800 /* memory error (RC) */
224 #define CSR0_MISS 0x1000 /* missed frame (RC) */
225 #define CSR0_CERR 0x2000 /* carrier error (no heartbeat :-) (RC) */
226 #define CSR0_BABL 0x4000 /* babble: tx-ed too many bits (RC) */
227 #define CSR0_ERR 0x8000 /* error (RC) */
230 #define CSR3_BCON 0x0001 /* byte control */
231 #define CSR3_ACON 0x0002 /* ALE control */
232 #define CSR3_BSWP 0x0004 /* byte swap (1=big endian) */
234 /***************************** Prototypes *****************************/
236 static int lance_probe( struct net_device *dev);
237 static int lance_open( struct net_device *dev );
238 static void lance_init_ring( struct net_device *dev );
239 static int lance_start_xmit( struct sk_buff *skb, struct net_device *dev );
240 static irqreturn_t lance_interrupt( int irq, void *dev_id);
241 static int lance_rx( struct net_device *dev );
242 static int lance_close( struct net_device *dev );
243 static void set_multicast_list( struct net_device *dev );
245 /************************* End of Prototypes **************************/
247 struct net_device * __init sun3lance_probe(int unit)
249 struct net_device *dev;
253 if (!MACH_IS_SUN3 && !MACH_IS_SUN3X)
254 return ERR_PTR(-ENODEV);
256 /* check that this machine has an onboard lance */
257 switch(idprom->id_machtype) {
258 case SM_SUN3|SM_3_50:
259 case SM_SUN3|SM_3_60:
260 case SM_SUN3X|SM_3_80:
261 /* these machines have lance */
265 return ERR_PTR(-ENODEV);
269 return ERR_PTR(-ENODEV);
271 dev = alloc_etherdev(sizeof(struct lance_private));
273 return ERR_PTR(-ENOMEM);
275 sprintf(dev->name, "eth%d", unit);
276 netdev_boot_setup_check(dev);
279 if (!lance_probe(dev))
282 err = register_netdev(dev);
290 iounmap((void __iomem *)dev->base_addr);
297 static int __init lance_probe( struct net_device *dev)
299 unsigned long ioaddr;
301 struct lance_private *lp;
303 static int did_version;
304 volatile unsigned short *ioaddr_probe;
305 unsigned short tmp1, tmp2;
308 ioaddr = (unsigned long)ioremap(LANCE_OBIO, PAGE_SIZE);
312 ioaddr = SUN3X_LANCE;
315 /* test to see if there's really a lance here */
316 /* (CSRO_INIT shouldn't be readable) */
318 ioaddr_probe = (volatile unsigned short *)ioaddr;
319 tmp1 = ioaddr_probe[0];
320 tmp2 = ioaddr_probe[1];
322 ioaddr_probe[1] = CSR0;
323 ioaddr_probe[0] = CSR0_INIT | CSR0_STOP;
325 if(ioaddr_probe[0] != CSR0_STOP) {
326 ioaddr_probe[0] = tmp1;
327 ioaddr_probe[1] = tmp2;
330 iounmap((void __iomem *)ioaddr);
335 lp = netdev_priv(dev);
338 MEM = dvma_malloc_align(sizeof(struct lance_memory), 0x10000);
341 iounmap((void __iomem *)ioaddr);
343 printk(KERN_WARNING "SUN3 Lance couldn't allocate DVMA memory\n");
347 lp->iobase = (volatile unsigned short *)ioaddr;
348 dev->base_addr = (unsigned long)ioaddr; /* informational only */
350 REGA(CSR0) = CSR0_STOP;
352 if (request_irq(LANCE_IRQ, lance_interrupt, IRQF_DISABLED, "SUN3 Lance", dev) < 0) {
354 iounmap((void __iomem *)ioaddr);
356 dvma_free((void *)MEM);
357 printk(KERN_WARNING "SUN3 Lance unable to allocate IRQ\n");
360 dev->irq = (unsigned short)LANCE_IRQ;
363 printk("%s: SUN3 Lance at io %#lx, mem %#lx, irq %d, hwaddr ",
365 (unsigned long)ioaddr,
369 /* copy in the ethernet address from the prom */
370 for(i = 0; i < 6 ; i++)
371 dev->dev_addr[i] = idprom->id_ethaddr[i];
373 /* tell the card it's ether address, bytes swapped */
374 MEM->init.hwaddr[0] = dev->dev_addr[1];
375 MEM->init.hwaddr[1] = dev->dev_addr[0];
376 MEM->init.hwaddr[2] = dev->dev_addr[3];
377 MEM->init.hwaddr[3] = dev->dev_addr[2];
378 MEM->init.hwaddr[4] = dev->dev_addr[5];
379 MEM->init.hwaddr[5] = dev->dev_addr[4];
381 printk("%pM\n", dev->dev_addr);
383 MEM->init.mode = 0x0000;
384 MEM->init.filter[0] = 0x00000000;
385 MEM->init.filter[1] = 0x00000000;
386 MEM->init.rdra = dvma_vtob(MEM->rx_head);
387 MEM->init.rlen = (RX_LOG_RING_SIZE << 13) |
388 (dvma_vtob(MEM->rx_head) >> 16);
389 MEM->init.tdra = dvma_vtob(MEM->tx_head);
390 MEM->init.tlen = (TX_LOG_RING_SIZE << 13) |
391 (dvma_vtob(MEM->tx_head) >> 16);
393 DPRINTK(2, ("initaddr: %08lx rx_ring: %08lx tx_ring: %08lx\n",
394 dvma_vtob(&(MEM->init)), dvma_vtob(MEM->rx_head),
395 (dvma_vtob(MEM->tx_head))));
397 if (did_version++ == 0)
400 /* The LANCE-specific entries in the device structure. */
401 dev->open = &lance_open;
402 dev->hard_start_xmit = &lance_start_xmit;
403 dev->stop = &lance_close;
404 dev->set_multicast_list = &set_multicast_list;
405 dev->set_mac_address = NULL;
406 // KLUDGE -- REMOVE ME
407 set_bit(__LINK_STATE_PRESENT, &dev->state);
413 static int lance_open( struct net_device *dev )
415 struct lance_private *lp = netdev_priv(dev);
418 DPRINTK( 2, ( "%s: lance_open()\n", dev->name ));
420 REGA(CSR0) = CSR0_STOP;
422 lance_init_ring(dev);
424 /* From now on, AREG is kept to point to CSR0 */
425 REGA(CSR0) = CSR0_INIT;
429 if (DREG & CSR0_IDON)
431 if (i < 0 || (DREG & CSR0_ERR)) {
432 DPRINTK( 2, ( "lance_open(): opening %s failed, i=%d, csr0=%04x\n",
433 dev->name, i, DREG ));
438 DREG = CSR0_IDON | CSR0_STRT | CSR0_INEA;
440 netif_start_queue(dev);
442 DPRINTK( 2, ( "%s: LANCE is open, csr0 %04x\n", dev->name, DREG ));
448 /* Initialize the LANCE Rx and Tx rings. */
450 static void lance_init_ring( struct net_device *dev )
452 struct lance_private *lp = netdev_priv(dev);
457 lp->new_rx = lp->new_tx = 0;
458 lp->old_rx = lp->old_tx = 0;
460 for( i = 0; i < TX_RING_SIZE; i++ ) {
461 MEM->tx_head[i].base = dvma_vtob(MEM->tx_data[i]);
462 MEM->tx_head[i].flag = 0;
463 MEM->tx_head[i].base_hi =
464 (dvma_vtob(MEM->tx_data[i])) >>16;
465 MEM->tx_head[i].length = 0;
466 MEM->tx_head[i].misc = 0;
469 for( i = 0; i < RX_RING_SIZE; i++ ) {
470 MEM->rx_head[i].base = dvma_vtob(MEM->rx_data[i]);
471 MEM->rx_head[i].flag = RMD1_OWN_CHIP;
472 MEM->rx_head[i].base_hi =
473 (dvma_vtob(MEM->rx_data[i])) >> 16;
474 MEM->rx_head[i].buf_length = -PKT_BUF_SZ | 0xf000;
475 MEM->rx_head[i].msg_length = 0;
478 /* tell the card it's ether address, bytes swapped */
479 MEM->init.hwaddr[0] = dev->dev_addr[1];
480 MEM->init.hwaddr[1] = dev->dev_addr[0];
481 MEM->init.hwaddr[2] = dev->dev_addr[3];
482 MEM->init.hwaddr[3] = dev->dev_addr[2];
483 MEM->init.hwaddr[4] = dev->dev_addr[5];
484 MEM->init.hwaddr[5] = dev->dev_addr[4];
486 MEM->init.mode = 0x0000;
487 MEM->init.filter[0] = 0x00000000;
488 MEM->init.filter[1] = 0x00000000;
489 MEM->init.rdra = dvma_vtob(MEM->rx_head);
490 MEM->init.rlen = (RX_LOG_RING_SIZE << 13) |
491 (dvma_vtob(MEM->rx_head) >> 16);
492 MEM->init.tdra = dvma_vtob(MEM->tx_head);
493 MEM->init.tlen = (TX_LOG_RING_SIZE << 13) |
494 (dvma_vtob(MEM->tx_head) >> 16);
497 /* tell the lance the address of its init block */
498 REGA(CSR1) = dvma_vtob(&(MEM->init));
499 REGA(CSR2) = dvma_vtob(&(MEM->init)) >> 16;
502 REGA(CSR3) = CSR3_BSWP | CSR3_ACON | CSR3_BCON;
504 REGA(CSR3) = CSR3_BSWP;
510 static int lance_start_xmit( struct sk_buff *skb, struct net_device *dev )
512 struct lance_private *lp = netdev_priv(dev);
514 struct lance_tx_head *head;
517 DPRINTK( 1, ( "%s: transmit start.\n",
520 /* Transmitter timeout, serious problems. */
521 if (netif_queue_stopped(dev)) {
522 int tickssofar = jiffies - dev->trans_start;
526 DPRINTK( 1, ( "%s: transmit timed out, status %04x, resetting.\n",
530 * Always set BSWP after a STOP as STOP puts it back into
531 * little endian mode.
533 REGA(CSR3) = CSR3_BSWP;
534 dev->stats.tx_errors++;
536 if(lance_debug >= 2) {
538 printk("Ring data: old_tx %d new_tx %d%s new_rx %d\n",
539 lp->old_tx, lp->new_tx,
540 lp->tx_full ? " (full)" : "",
542 for( i = 0 ; i < RX_RING_SIZE; i++ )
543 printk( "rx #%d: base=%04x blen=%04x mlen=%04x\n",
544 i, MEM->rx_head[i].base,
545 -MEM->rx_head[i].buf_length,
546 MEM->rx_head[i].msg_length);
547 for( i = 0 ; i < TX_RING_SIZE; i++ )
548 printk("tx #%d: base=%04x len=%04x misc=%04x\n",
549 i, MEM->tx_head[i].base,
550 -MEM->tx_head[i].length,
551 MEM->tx_head[i].misc );
554 lance_init_ring(dev);
555 REGA( CSR0 ) = CSR0_INEA | CSR0_INIT | CSR0_STRT;
557 netif_start_queue(dev);
558 dev->trans_start = jiffies;
564 /* Block a timer-based transmit from overlapping. This could better be
565 done with atomic_swap(1, dev->tbusy), but set_bit() works as well. */
567 /* Block a timer-based transmit from overlapping with us by
568 stopping the queue for a bit... */
570 netif_stop_queue(dev);
572 if (test_and_set_bit( 0, (void*)&lp->lock ) != 0) {
573 printk( "%s: tx queue lock!.\n", dev->name);
574 /* don't clear dev->tbusy flag. */
579 DPRINTK( 2, ( "%s: lance_start_xmit() called, csr0 %4.4x.\n",
583 /* this weirdness doesn't appear on sun3... */
584 if(!(DREG & CSR0_INIT)) {
585 DPRINTK( 1, ("INIT not set, reinitializing...\n"));
586 REGA( CSR0 ) = CSR0_STOP;
587 lance_init_ring(dev);
588 REGA( CSR0 ) = CSR0_INIT | CSR0_STRT;
592 /* Fill in a Tx ring entry */
594 if (lance_debug >= 2) {
595 printk( "%s: TX pkt %d type 0x%04x"
597 " data at 0x%08x len %d\n",
598 dev->name, lp->new_tx, ((u_short *)skb->data)[6],
599 DEV_ADDR(&skb->data[6]), DEV_ADDR(skb->data),
600 (int)skb->data, (int)skb->len );
603 /* We're not prepared for the int until the last flags are set/reset.
604 * And the int may happen already after setting the OWN_CHIP... */
605 local_irq_save(flags);
607 /* Mask to ring buffer boundary. */
609 head = &(MEM->tx_head[entry]);
611 /* Caution: the write order is important here, set the "ownership" bits
615 /* the sun3's lance needs it's buffer padded to the minimum
617 len = (ETH_ZLEN < skb->len) ? skb->len : ETH_ZLEN;
619 // head->length = -len;
620 head->length = (-len) | 0xf000;
623 skb_copy_from_linear_data(skb, PKTBUF_ADDR(head), skb->len);
625 memset(PKTBUF_ADDR(head) + skb->len, 0, len-skb->len);
627 head->flag = TMD1_OWN_CHIP | TMD1_ENP | TMD1_STP;
628 lp->new_tx = (lp->new_tx + 1) & TX_RING_MOD_MASK;
629 dev->stats.tx_bytes += skb->len;
631 /* Trigger an immediate send poll. */
632 REGA(CSR0) = CSR0_INEA | CSR0_TDMD | CSR0_STRT;
634 DPRINTK( 2, ( "%s: lance_start_xmit() exiting, csr0 %4.4x.\n",
636 dev->trans_start = jiffies;
637 dev_kfree_skb( skb );
640 if ((MEM->tx_head[(entry+1) & TX_RING_MOD_MASK].flag & TMD1_OWN) ==
642 netif_start_queue(dev);
644 local_irq_restore(flags);
649 /* The LANCE interrupt handler. */
651 static irqreturn_t lance_interrupt( int irq, void *dev_id)
653 struct net_device *dev = dev_id;
654 struct lance_private *lp = netdev_priv(dev);
656 static int in_interrupt;
659 DPRINTK( 1, ( "lance_interrupt(): invalid dev_id\n" ));
664 DPRINTK( 2, ( "%s: Re-entering the interrupt handler.\n", dev->name ));
674 DREG = csr0 & (CSR0_TINT | CSR0_RINT | CSR0_IDON);
678 DREG = CSR0_BABL | CSR0_MERR | CSR0_CERR | CSR0_MISS;
681 DPRINTK( 2, ( "%s: interrupt csr0=%04x new csr=%04x.\n",
682 dev->name, csr0, DREG ));
684 if (csr0 & CSR0_TINT) { /* Tx-done interrupt */
685 int old_tx = lp->old_tx;
687 // if(lance_debug >= 3) {
690 // printk("%s: tx int\n", dev->name);
692 // for(i = 0; i < TX_RING_SIZE; i++)
693 // printk("ring %d flag=%04x\n", i,
694 // MEM->tx_head[i].flag);
697 while( old_tx != lp->new_tx) {
698 struct lance_tx_head *head = &(MEM->tx_head[old_tx]);
700 DPRINTK(3, ("on tx_ring %d\n", old_tx));
702 if (head->flag & TMD1_OWN_CHIP)
703 break; /* It still hasn't been Txed */
705 if (head->flag & TMD1_ERR) {
706 int status = head->misc;
707 dev->stats.tx_errors++;
708 if (status & TMD3_RTRY) dev->stats.tx_aborted_errors++;
709 if (status & TMD3_LCAR) dev->stats.tx_carrier_errors++;
710 if (status & TMD3_LCOL) dev->stats.tx_window_errors++;
711 if (status & (TMD3_UFLO | TMD3_BUFF)) {
712 dev->stats.tx_fifo_errors++;
713 printk("%s: Tx FIFO error\n",
715 REGA(CSR0) = CSR0_STOP;
716 REGA(CSR3) = CSR3_BSWP;
717 lance_init_ring(dev);
718 REGA(CSR0) = CSR0_STRT | CSR0_INEA;
721 } else if(head->flag & (TMD1_ENP | TMD1_STP)) {
723 head->flag &= ~(TMD1_ENP | TMD1_STP);
724 if(head->flag & (TMD1_ONE | TMD1_MORE))
725 dev->stats.collisions++;
727 dev->stats.tx_packets++;
728 DPRINTK(3, ("cleared tx ring %d\n", old_tx));
730 old_tx = (old_tx +1) & TX_RING_MOD_MASK;
737 if (netif_queue_stopped(dev)) {
738 /* The ring is no longer full, clear tbusy. */
739 netif_start_queue(dev);
740 netif_wake_queue(dev);
743 if (csr0 & CSR0_RINT) /* Rx interrupt */
746 /* Log misc errors. */
747 if (csr0 & CSR0_BABL) dev->stats.tx_errors++; /* Tx babble. */
748 if (csr0 & CSR0_MISS) dev->stats.rx_errors++; /* Missed a Rx frame. */
749 if (csr0 & CSR0_MERR) {
750 DPRINTK( 1, ( "%s: Bus master arbitration failure (?!?), "
751 "status %04x.\n", dev->name, csr0 ));
752 /* Restart the chip. */
753 REGA(CSR0) = CSR0_STOP;
754 REGA(CSR3) = CSR3_BSWP;
755 lance_init_ring(dev);
756 REGA(CSR0) = CSR0_STRT | CSR0_INEA;
760 /* Clear any other interrupt, and set interrupt enable. */
761 // DREG = CSR0_BABL | CSR0_CERR | CSR0_MISS | CSR0_MERR |
762 // CSR0_IDON | CSR0_INEA;
764 REGA(CSR0) = CSR0_INEA;
766 if(DREG & (CSR0_RINT | CSR0_TINT)) {
767 DPRINTK(2, ("restarting interrupt, csr0=%#04x\n", DREG));
771 DPRINTK( 2, ( "%s: exiting interrupt, csr0=%#04x.\n",
777 /* get packet, toss into skbuff */
778 static int lance_rx( struct net_device *dev )
780 struct lance_private *lp = netdev_priv(dev);
781 int entry = lp->new_rx;
783 /* If we own the next entry, it's a new packet. Send it up. */
784 while( (MEM->rx_head[entry].flag & RMD1_OWN) == RMD1_OWN_HOST ) {
785 struct lance_rx_head *head = &(MEM->rx_head[entry]);
786 int status = head->flag;
788 if (status != (RMD1_ENP|RMD1_STP)) { /* There was an error. */
789 /* There is a tricky error noted by John Murphy,
790 <murf@perftech.com> to Russ Nelson: Even with
791 full-sized buffers it's possible for a jabber packet to use two
792 buffers, with only the last correctly noting the error. */
793 if (status & RMD1_ENP) /* Only count a general error at the */
794 dev->stats.rx_errors++; /* end of a packet.*/
795 if (status & RMD1_FRAM) dev->stats.rx_frame_errors++;
796 if (status & RMD1_OFLO) dev->stats.rx_over_errors++;
797 if (status & RMD1_CRC) dev->stats.rx_crc_errors++;
798 if (status & RMD1_BUFF) dev->stats.rx_fifo_errors++;
799 head->flag &= (RMD1_ENP|RMD1_STP);
801 /* Malloc up new buffer, compatible with net-3. */
802 // short pkt_len = head->msg_length;// & 0xfff;
803 short pkt_len = (head->msg_length & 0xfff) - 4;
807 printk( "%s: Runt packet!\n", dev->name );
808 dev->stats.rx_errors++;
811 skb = dev_alloc_skb( pkt_len+2 );
813 DPRINTK( 1, ( "%s: Memory squeeze, deferring packet.\n",
816 dev->stats.rx_dropped++;
817 head->msg_length = 0;
818 head->flag |= RMD1_OWN_CHIP;
819 lp->new_rx = (lp->new_rx+1) &
824 if (lance_debug >= 3) {
825 u_char *data = PKTBUF_ADDR(head);
826 printk("%s: RX pkt %d type 0x%04x"
828 dev->name, lp->new_tx, ((u_short *)data)[6],
831 printk(" data %02x %02x %02x %02x %02x %02x %02x %02x "
833 data[15], data[16], data[17], data[18],
834 data[19], data[20], data[21], data[22],
838 if (lance_debug >= 3) {
839 u_char *data = PKTBUF_ADDR(head);
840 printk( "%s: RX pkt %d type 0x%04x len %d\n ", dev->name, entry, ((u_short *)data)[6], pkt_len);
844 skb_reserve( skb, 2 ); /* 16 byte align */
845 skb_put( skb, pkt_len ); /* Make room */
846 skb_copy_to_linear_data(skb,
850 skb->protocol = eth_type_trans( skb, dev );
852 dev->stats.rx_packets++;
853 dev->stats.rx_bytes += pkt_len;
857 // head->buf_length = -PKT_BUF_SZ | 0xf000;
858 head->msg_length = 0;
859 head->flag = RMD1_OWN_CHIP;
861 entry = lp->new_rx = (lp->new_rx +1) & RX_RING_MOD_MASK;
864 /* From lance.c (Donald Becker): */
865 /* We should check that at least two ring entries are free.
866 If not, we should free one and mark stats->rx_dropped++. */
872 static int lance_close( struct net_device *dev )
874 struct lance_private *lp = netdev_priv(dev);
876 netif_stop_queue(dev);
880 DPRINTK( 2, ( "%s: Shutting down ethercard, status was %2.2x.\n",
883 /* We stop the LANCE here -- it occasionally polls
884 memory if we don't. */
890 /* Set or clear the multicast filter for this adaptor.
891 num_addrs == -1 Promiscuous mode, receive all packets
892 num_addrs == 0 Normal mode, clear multicast list
893 num_addrs > 0 Multicast mode, receive normal and MC packets, and do
894 best-effort filtering.
897 /* completely untested on a sun3 */
898 static void set_multicast_list( struct net_device *dev )
900 struct lance_private *lp = netdev_priv(dev);
902 if(netif_queue_stopped(dev))
903 /* Only possible if board is already started */
906 /* We take the simple way out and always enable promiscuous mode. */
907 DREG = CSR0_STOP; /* Temporarily stop the lance. */
909 if (dev->flags & IFF_PROMISC) {
910 /* Log any net taps. */
911 DPRINTK( 3, ( "%s: Promiscuous mode enabled.\n", dev->name ));
912 REGA( CSR15 ) = 0x8000; /* Set promiscuous mode */
914 short multicast_table[4];
915 int num_addrs = dev->mc_count;
917 /* We don't use the multicast table, but rely on upper-layer
919 memset( multicast_table, (num_addrs == 0) ? 0 : -1,
920 sizeof(multicast_table) );
921 for( i = 0; i < 4; i++ )
922 REGA( CSR8+i ) = multicast_table[i];
923 REGA( CSR15 ) = 0; /* Unset promiscuous mode */
927 * Always set BSWP after a STOP as STOP puts it back into
928 * little endian mode.
930 REGA( CSR3 ) = CSR3_BSWP;
932 /* Resume normal operation and reset AREG to CSR0 */
933 REGA( CSR0 ) = CSR0_IDON | CSR0_INEA | CSR0_STRT;
939 static struct net_device *sun3lance_dev;
941 int __init init_module(void)
943 sun3lance_dev = sun3lance_probe(-1);
944 if (IS_ERR(sun3lance_dev))
945 return PTR_ERR(sun3lance_dev);
949 void __exit cleanup_module(void)
951 unregister_netdev(sun3lance_dev);
953 iounmap((void __iomem *)sun3lance_dev->base_addr);
955 free_netdev(sun3lance_dev);