2 * Linux device driver for RTL8187
4 * Copyright 2007 Michael Wu <flamingice@sourmilk.net>
5 * Copyright 2007 Andrea Merello <andreamrl@tiscali.it>
7 * Based on the r8187 driver, which is:
8 * Copyright 2005 Andrea Merello <andreamrl@tiscali.it>, et al.
10 * The driver was extended to the RTL8187B in 2008 by:
11 * Herton Ronaldo Krzesinski <herton@mandriva.com.br>
12 * Hin-Tak Leung <htl10@users.sourceforge.net>
13 * Larry Finger <Larry.Finger@lwfinger.net>
15 * Magic delays and register offsets below are taken from the original
16 * r8187 driver sources. Thanks to Realtek for their support!
18 * This program is free software; you can redistribute it and/or modify
19 * it under the terms of the GNU General Public License version 2 as
20 * published by the Free Software Foundation.
23 #include <linux/init.h>
24 #include <linux/usb.h>
25 #include <linux/delay.h>
26 #include <linux/etherdevice.h>
27 #include <linux/eeprom_93cx6.h>
28 #include <net/mac80211.h>
31 #include "rtl8187_rtl8225.h"
32 #ifdef CONFIG_RTL8187_LEDS
33 #include "rtl8187_leds.h"
36 MODULE_AUTHOR("Michael Wu <flamingice@sourmilk.net>");
37 MODULE_AUTHOR("Andrea Merello <andreamrl@tiscali.it>");
38 MODULE_AUTHOR("Herton Ronaldo Krzesinski <herton@mandriva.com.br>");
39 MODULE_AUTHOR("Hin-Tak Leung <htl10@users.sourceforge.net>");
40 MODULE_AUTHOR("Larry Finger <Larry.Finger@lwfinger.net>");
41 MODULE_DESCRIPTION("RTL8187/RTL8187B USB wireless driver");
42 MODULE_LICENSE("GPL");
44 static struct usb_device_id rtl8187_table[] __devinitdata = {
46 {USB_DEVICE(0x0b05, 0x171d), .driver_info = DEVICE_RTL8187},
48 {USB_DEVICE(0x050d, 0x705e), .driver_info = DEVICE_RTL8187B},
50 {USB_DEVICE(0x0bda, 0x8187), .driver_info = DEVICE_RTL8187},
51 {USB_DEVICE(0x0bda, 0x8189), .driver_info = DEVICE_RTL8187B},
52 {USB_DEVICE(0x0bda, 0x8197), .driver_info = DEVICE_RTL8187B},
53 {USB_DEVICE(0x0bda, 0x8198), .driver_info = DEVICE_RTL8187B},
55 {USB_DEVICE(0x0769, 0x11F2), .driver_info = DEVICE_RTL8187},
57 {USB_DEVICE(0x0789, 0x010C), .driver_info = DEVICE_RTL8187},
59 {USB_DEVICE(0x0846, 0x6100), .driver_info = DEVICE_RTL8187},
60 {USB_DEVICE(0x0846, 0x6a00), .driver_info = DEVICE_RTL8187},
61 {USB_DEVICE(0x0846, 0x4260), .driver_info = DEVICE_RTL8187B},
63 {USB_DEVICE(0x03f0, 0xca02), .driver_info = DEVICE_RTL8187},
65 {USB_DEVICE(0x0df6, 0x000d), .driver_info = DEVICE_RTL8187},
66 {USB_DEVICE(0x0df6, 0x0028), .driver_info = DEVICE_RTL8187B},
67 /* Sphairon Access Systems GmbH */
68 {USB_DEVICE(0x114B, 0x0150), .driver_info = DEVICE_RTL8187},
69 /* Dick Smith Electronics */
70 {USB_DEVICE(0x1371, 0x9401), .driver_info = DEVICE_RTL8187},
72 {USB_DEVICE(0x13d1, 0xabe6), .driver_info = DEVICE_RTL8187},
74 {USB_DEVICE(0x18E8, 0x6232), .driver_info = DEVICE_RTL8187},
76 {USB_DEVICE(0x1b75, 0x8187), .driver_info = DEVICE_RTL8187},
80 MODULE_DEVICE_TABLE(usb, rtl8187_table);
82 static const struct ieee80211_rate rtl818x_rates[] = {
83 { .bitrate = 10, .hw_value = 0, },
84 { .bitrate = 20, .hw_value = 1, },
85 { .bitrate = 55, .hw_value = 2, },
86 { .bitrate = 110, .hw_value = 3, },
87 { .bitrate = 60, .hw_value = 4, },
88 { .bitrate = 90, .hw_value = 5, },
89 { .bitrate = 120, .hw_value = 6, },
90 { .bitrate = 180, .hw_value = 7, },
91 { .bitrate = 240, .hw_value = 8, },
92 { .bitrate = 360, .hw_value = 9, },
93 { .bitrate = 480, .hw_value = 10, },
94 { .bitrate = 540, .hw_value = 11, },
97 static const struct ieee80211_channel rtl818x_channels[] = {
98 { .center_freq = 2412 },
99 { .center_freq = 2417 },
100 { .center_freq = 2422 },
101 { .center_freq = 2427 },
102 { .center_freq = 2432 },
103 { .center_freq = 2437 },
104 { .center_freq = 2442 },
105 { .center_freq = 2447 },
106 { .center_freq = 2452 },
107 { .center_freq = 2457 },
108 { .center_freq = 2462 },
109 { .center_freq = 2467 },
110 { .center_freq = 2472 },
111 { .center_freq = 2484 },
114 static void rtl8187_iowrite_async_cb(struct urb *urb)
119 static void rtl8187_iowrite_async(struct rtl8187_priv *priv, __le16 addr,
122 struct usb_ctrlrequest *dr;
124 struct rtl8187_async_write_data {
126 struct usb_ctrlrequest dr;
130 buf = kmalloc(sizeof(*buf), GFP_ATOMIC);
134 urb = usb_alloc_urb(0, GFP_ATOMIC);
142 dr->bRequestType = RTL8187_REQT_WRITE;
143 dr->bRequest = RTL8187_REQ_SET_REG;
146 dr->wLength = cpu_to_le16(len);
148 memcpy(buf, data, len);
150 usb_fill_control_urb(urb, priv->udev, usb_sndctrlpipe(priv->udev, 0),
151 (unsigned char *)dr, buf, len,
152 rtl8187_iowrite_async_cb, buf);
153 usb_anchor_urb(urb, &priv->anchored);
154 rc = usb_submit_urb(urb, GFP_ATOMIC);
157 usb_unanchor_urb(urb);
162 static inline void rtl818x_iowrite32_async(struct rtl8187_priv *priv,
163 __le32 *addr, u32 val)
165 __le32 buf = cpu_to_le32(val);
167 rtl8187_iowrite_async(priv, cpu_to_le16((unsigned long)addr),
171 void rtl8187_write_phy(struct ieee80211_hw *dev, u8 addr, u32 data)
173 struct rtl8187_priv *priv = dev->priv;
178 rtl818x_iowrite8(priv, &priv->map->PHY[3], (data >> 24) & 0xFF);
179 rtl818x_iowrite8(priv, &priv->map->PHY[2], (data >> 16) & 0xFF);
180 rtl818x_iowrite8(priv, &priv->map->PHY[1], (data >> 8) & 0xFF);
181 rtl818x_iowrite8(priv, &priv->map->PHY[0], data & 0xFF);
184 static void rtl8187_tx_cb(struct urb *urb)
186 struct sk_buff *skb = (struct sk_buff *)urb->context;
187 struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb);
188 struct ieee80211_hw *hw = info->rate_driver_data[0];
189 struct rtl8187_priv *priv = hw->priv;
191 skb_pull(skb, priv->is_rtl8187b ? sizeof(struct rtl8187b_tx_hdr) :
192 sizeof(struct rtl8187_tx_hdr));
193 ieee80211_tx_info_clear_status(info);
195 if (!(urb->status) && !(info->flags & IEEE80211_TX_CTL_NO_ACK)) {
196 if (priv->is_rtl8187b) {
197 skb_queue_tail(&priv->b_tx_status.queue, skb);
199 /* queue is "full", discard last items */
200 while (skb_queue_len(&priv->b_tx_status.queue) > 5) {
201 struct sk_buff *old_skb;
203 dev_dbg(&priv->udev->dev,
204 "transmit status queue full\n");
206 old_skb = skb_dequeue(&priv->b_tx_status.queue);
207 ieee80211_tx_status_irqsafe(hw, old_skb);
211 info->flags |= IEEE80211_TX_STAT_ACK;
214 if (priv->is_rtl8187b)
215 ieee80211_tx_status_irqsafe(hw, skb);
217 /* Retry information for the RTI8187 is only available by
218 * reading a register in the device. We are in interrupt mode
219 * here, thus queue the skb and finish on a work queue. */
220 skb_queue_tail(&priv->b_tx_status.queue, skb);
221 queue_delayed_work(hw->workqueue, &priv->work, 0);
225 static int rtl8187_tx(struct ieee80211_hw *dev, struct sk_buff *skb)
227 struct rtl8187_priv *priv = dev->priv;
228 struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb);
236 urb = usb_alloc_urb(0, GFP_ATOMIC);
243 flags |= RTL818X_TX_DESC_FLAG_NO_ENC;
245 flags |= ieee80211_get_tx_rate(dev, info)->hw_value << 24;
246 if (ieee80211_has_morefrags(((struct ieee80211_hdr *)skb->data)->frame_control))
247 flags |= RTL818X_TX_DESC_FLAG_MOREFRAG;
248 if (info->control.rates[0].flags & IEEE80211_TX_RC_USE_RTS_CTS) {
249 flags |= RTL818X_TX_DESC_FLAG_RTS;
250 flags |= ieee80211_get_rts_cts_rate(dev, info)->hw_value << 19;
251 rts_dur = ieee80211_rts_duration(dev, priv->vif,
253 } else if (info->control.rates[0].flags & IEEE80211_TX_RC_USE_CTS_PROTECT) {
254 flags |= RTL818X_TX_DESC_FLAG_CTS;
255 flags |= ieee80211_get_rts_cts_rate(dev, info)->hw_value << 19;
258 if (!priv->is_rtl8187b) {
259 struct rtl8187_tx_hdr *hdr =
260 (struct rtl8187_tx_hdr *)skb_push(skb, sizeof(*hdr));
261 hdr->flags = cpu_to_le32(flags);
263 hdr->rts_duration = rts_dur;
264 hdr->retry = cpu_to_le32((info->control.rates[0].count - 1) << 8);
269 /* fc needs to be calculated before skb_push() */
270 unsigned int epmap[4] = { 6, 7, 5, 4 };
271 struct ieee80211_hdr *tx_hdr =
272 (struct ieee80211_hdr *)(skb->data);
273 u16 fc = le16_to_cpu(tx_hdr->frame_control);
275 struct rtl8187b_tx_hdr *hdr =
276 (struct rtl8187b_tx_hdr *)skb_push(skb, sizeof(*hdr));
277 struct ieee80211_rate *txrate =
278 ieee80211_get_tx_rate(dev, info);
279 memset(hdr, 0, sizeof(*hdr));
280 hdr->flags = cpu_to_le32(flags);
281 hdr->rts_duration = rts_dur;
282 hdr->retry = cpu_to_le32((info->control.rates[0].count - 1) << 8);
284 ieee80211_generic_frame_duration(dev, priv->vif,
288 if ((fc & IEEE80211_FCTL_FTYPE) == IEEE80211_FTYPE_MGMT)
291 ep = epmap[skb_get_queue_mapping(skb)];
294 info->rate_driver_data[0] = dev;
295 info->rate_driver_data[1] = urb;
297 usb_fill_bulk_urb(urb, priv->udev, usb_sndbulkpipe(priv->udev, ep),
298 buf, skb->len, rtl8187_tx_cb, skb);
299 urb->transfer_flags |= URB_ZERO_PACKET;
300 usb_anchor_urb(urb, &priv->anchored);
301 rc = usb_submit_urb(urb, GFP_ATOMIC);
303 usb_unanchor_urb(urb);
311 static void rtl8187_rx_cb(struct urb *urb)
313 struct sk_buff *skb = (struct sk_buff *)urb->context;
314 struct rtl8187_rx_info *info = (struct rtl8187_rx_info *)skb->cb;
315 struct ieee80211_hw *dev = info->dev;
316 struct rtl8187_priv *priv = dev->priv;
317 struct ieee80211_rx_status rx_status = { 0 };
323 spin_lock_irqsave(&priv->rx_queue.lock, f);
325 __skb_unlink(skb, &priv->rx_queue);
327 spin_unlock_irqrestore(&priv->rx_queue.lock, f);
330 spin_unlock_irqrestore(&priv->rx_queue.lock, f);
331 skb_put(skb, urb->actual_length);
333 if (unlikely(urb->status)) {
334 dev_kfree_skb_irq(skb);
338 if (!priv->is_rtl8187b) {
339 struct rtl8187_rx_hdr *hdr =
340 (typeof(hdr))(skb_tail_pointer(skb) - sizeof(*hdr));
341 flags = le32_to_cpu(hdr->flags);
342 /* As with the RTL8187B below, the AGC is used to calculate
343 * signal strength and quality. In this case, the scaling
344 * constants are derived from the output of p54usb.
346 quality = 130 - ((41 * hdr->agc) >> 6);
347 signal = -4 - ((27 * hdr->agc) >> 6);
348 rx_status.antenna = (hdr->signal >> 7) & 1;
349 rx_status.mactime = le64_to_cpu(hdr->mac_time);
351 struct rtl8187b_rx_hdr *hdr =
352 (typeof(hdr))(skb_tail_pointer(skb) - sizeof(*hdr));
353 /* The Realtek datasheet for the RTL8187B shows that the RX
354 * header contains the following quantities: signal quality,
355 * RSSI, AGC, the received power in dB, and the measured SNR.
356 * In testing, none of these quantities show qualitative
357 * agreement with AP signal strength, except for the AGC,
358 * which is inversely proportional to the strength of the
359 * signal. In the following, the quality and signal strength
360 * are derived from the AGC. The arbitrary scaling constants
361 * are chosen to make the results close to the values obtained
362 * for a BCM4312 using b43 as the driver. The noise is ignored
365 flags = le32_to_cpu(hdr->flags);
366 quality = 170 - hdr->agc;
367 signal = 14 - hdr->agc / 2;
368 rx_status.antenna = (hdr->rssi >> 7) & 1;
369 rx_status.mactime = le64_to_cpu(hdr->mac_time);
374 rx_status.qual = quality;
375 priv->quality = quality;
376 rx_status.signal = signal;
377 priv->signal = signal;
378 rate = (flags >> 20) & 0xF;
379 skb_trim(skb, flags & 0x0FFF);
380 rx_status.rate_idx = rate;
381 rx_status.freq = dev->conf.channel->center_freq;
382 rx_status.band = dev->conf.channel->band;
383 rx_status.flag |= RX_FLAG_TSFT;
384 if (flags & RTL818X_RX_DESC_FLAG_CRC32_ERR)
385 rx_status.flag |= RX_FLAG_FAILED_FCS_CRC;
386 ieee80211_rx_irqsafe(dev, skb, &rx_status);
388 skb = dev_alloc_skb(RTL8187_MAX_RX);
389 if (unlikely(!skb)) {
390 /* TODO check rx queue length and refill *somewhere* */
394 info = (struct rtl8187_rx_info *)skb->cb;
397 urb->transfer_buffer = skb_tail_pointer(skb);
399 skb_queue_tail(&priv->rx_queue, skb);
401 usb_anchor_urb(urb, &priv->anchored);
402 if (usb_submit_urb(urb, GFP_ATOMIC)) {
403 usb_unanchor_urb(urb);
404 skb_unlink(skb, &priv->rx_queue);
405 dev_kfree_skb_irq(skb);
409 static int rtl8187_init_urbs(struct ieee80211_hw *dev)
411 struct rtl8187_priv *priv = dev->priv;
412 struct urb *entry = NULL;
414 struct rtl8187_rx_info *info;
417 while (skb_queue_len(&priv->rx_queue) < 16) {
418 skb = __dev_alloc_skb(RTL8187_MAX_RX, GFP_KERNEL);
423 entry = usb_alloc_urb(0, GFP_KERNEL);
428 usb_fill_bulk_urb(entry, priv->udev,
429 usb_rcvbulkpipe(priv->udev,
430 priv->is_rtl8187b ? 3 : 1),
431 skb_tail_pointer(skb),
432 RTL8187_MAX_RX, rtl8187_rx_cb, skb);
433 info = (struct rtl8187_rx_info *)skb->cb;
436 skb_queue_tail(&priv->rx_queue, skb);
437 usb_anchor_urb(entry, &priv->anchored);
438 ret = usb_submit_urb(entry, GFP_KERNEL);
440 skb_unlink(skb, &priv->rx_queue);
441 usb_unanchor_urb(entry);
451 usb_kill_anchored_urbs(&priv->anchored);
455 static void rtl8187b_status_cb(struct urb *urb)
457 struct ieee80211_hw *hw = (struct ieee80211_hw *)urb->context;
458 struct rtl8187_priv *priv = hw->priv;
460 unsigned int cmd_type;
462 if (unlikely(urb->status))
466 * Read from status buffer:
468 * bits [30:31] = cmd type:
469 * - 0 indicates tx beacon interrupt
470 * - 1 indicates tx close descriptor
472 * In the case of tx beacon interrupt:
473 * [0:9] = Last Beacon CW
476 * [32:63] = Last Beacon TSF
478 * If it's tx close descriptor:
479 * [0:7] = Packet Retry Count
480 * [8:14] = RTS Retry Count
482 * [16:27] = Sequence No
486 * [32:47] = unused (reserved?)
487 * [48:63] = MAC Used Time
489 val = le64_to_cpu(priv->b_tx_status.buf);
491 cmd_type = (val >> 30) & 0x3;
493 unsigned int pkt_rc, seq_no;
496 struct ieee80211_hdr *ieee80211hdr;
500 tok = val & (1 << 15);
501 seq_no = (val >> 16) & 0xFFF;
503 spin_lock_irqsave(&priv->b_tx_status.queue.lock, flags);
504 skb_queue_reverse_walk(&priv->b_tx_status.queue, skb) {
505 ieee80211hdr = (struct ieee80211_hdr *)skb->data;
508 * While testing, it was discovered that the seq_no
509 * doesn't actually contains the sequence number.
510 * Instead of returning just the 12 bits of sequence
511 * number, hardware is returning entire sequence control
512 * (fragment number plus sequence number) in a 12 bit
513 * only field overflowing after some time. As a
514 * workaround, just consider the lower bits, and expect
515 * it's unlikely we wrongly ack some sent data
517 if ((le16_to_cpu(ieee80211hdr->seq_ctrl)
521 if (skb != (struct sk_buff *) &priv->b_tx_status.queue) {
522 struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb);
524 __skb_unlink(skb, &priv->b_tx_status.queue);
526 info->flags |= IEEE80211_TX_STAT_ACK;
527 info->status.rates[0].count = pkt_rc + 1;
529 ieee80211_tx_status_irqsafe(hw, skb);
531 spin_unlock_irqrestore(&priv->b_tx_status.queue.lock, flags);
534 usb_anchor_urb(urb, &priv->anchored);
535 if (usb_submit_urb(urb, GFP_ATOMIC))
536 usb_unanchor_urb(urb);
539 static int rtl8187b_init_status_urb(struct ieee80211_hw *dev)
541 struct rtl8187_priv *priv = dev->priv;
545 entry = usb_alloc_urb(0, GFP_KERNEL);
549 usb_fill_bulk_urb(entry, priv->udev, usb_rcvbulkpipe(priv->udev, 9),
550 &priv->b_tx_status.buf, sizeof(priv->b_tx_status.buf),
551 rtl8187b_status_cb, dev);
553 usb_anchor_urb(entry, &priv->anchored);
554 ret = usb_submit_urb(entry, GFP_KERNEL);
556 usb_unanchor_urb(entry);
562 static int rtl8187_cmd_reset(struct ieee80211_hw *dev)
564 struct rtl8187_priv *priv = dev->priv;
568 reg = rtl818x_ioread8(priv, &priv->map->CMD);
570 reg |= RTL818X_CMD_RESET;
571 rtl818x_iowrite8(priv, &priv->map->CMD, reg);
576 if (!(rtl818x_ioread8(priv, &priv->map->CMD) &
582 printk(KERN_ERR "%s: Reset timeout!\n", wiphy_name(dev->wiphy));
586 /* reload registers from eeprom */
587 rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD, RTL818X_EEPROM_CMD_LOAD);
592 if (!(rtl818x_ioread8(priv, &priv->map->EEPROM_CMD) &
593 RTL818X_EEPROM_CMD_CONFIG))
598 printk(KERN_ERR "%s: eeprom reset timeout!\n",
599 wiphy_name(dev->wiphy));
606 static int rtl8187_init_hw(struct ieee80211_hw *dev)
608 struct rtl8187_priv *priv = dev->priv;
613 rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD,
614 RTL818X_EEPROM_CMD_CONFIG);
615 reg = rtl818x_ioread8(priv, &priv->map->CONFIG3);
616 rtl818x_iowrite8(priv, &priv->map->CONFIG3, reg |
617 RTL818X_CONFIG3_ANAPARAM_WRITE);
618 rtl818x_iowrite32(priv, &priv->map->ANAPARAM,
619 RTL8187_RTL8225_ANAPARAM_ON);
620 rtl818x_iowrite32(priv, &priv->map->ANAPARAM2,
621 RTL8187_RTL8225_ANAPARAM2_ON);
622 rtl818x_iowrite8(priv, &priv->map->CONFIG3, reg &
623 ~RTL818X_CONFIG3_ANAPARAM_WRITE);
624 rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD,
625 RTL818X_EEPROM_CMD_NORMAL);
627 rtl818x_iowrite16(priv, &priv->map->INT_MASK, 0);
630 rtl818x_iowrite8(priv, (u8 *)0xFE18, 0x10);
631 rtl818x_iowrite8(priv, (u8 *)0xFE18, 0x11);
632 rtl818x_iowrite8(priv, (u8 *)0xFE18, 0x00);
635 res = rtl8187_cmd_reset(dev);
639 rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD, RTL818X_EEPROM_CMD_CONFIG);
640 reg = rtl818x_ioread8(priv, &priv->map->CONFIG3);
641 rtl818x_iowrite8(priv, &priv->map->CONFIG3,
642 reg | RTL818X_CONFIG3_ANAPARAM_WRITE);
643 rtl818x_iowrite32(priv, &priv->map->ANAPARAM,
644 RTL8187_RTL8225_ANAPARAM_ON);
645 rtl818x_iowrite32(priv, &priv->map->ANAPARAM2,
646 RTL8187_RTL8225_ANAPARAM2_ON);
647 rtl818x_iowrite8(priv, &priv->map->CONFIG3,
648 reg & ~RTL818X_CONFIG3_ANAPARAM_WRITE);
649 rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD, RTL818X_EEPROM_CMD_NORMAL);
652 rtl818x_iowrite16(priv, &priv->map->RFPinsSelect, 0);
653 rtl818x_iowrite8(priv, &priv->map->GPIO, 0);
655 rtl818x_iowrite16(priv, &priv->map->RFPinsSelect, (4 << 8));
656 rtl818x_iowrite8(priv, &priv->map->GPIO, 1);
657 rtl818x_iowrite8(priv, &priv->map->GP_ENABLE, 0);
659 rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD, RTL818X_EEPROM_CMD_CONFIG);
661 rtl818x_iowrite16(priv, (__le16 *)0xFFF4, 0xFFFF);
662 reg = rtl818x_ioread8(priv, &priv->map->CONFIG1);
665 rtl818x_iowrite8(priv, &priv->map->CONFIG1, reg);
667 rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD, RTL818X_EEPROM_CMD_NORMAL);
669 rtl818x_iowrite32(priv, &priv->map->INT_TIMEOUT, 0);
670 rtl818x_iowrite8(priv, &priv->map->WPA_CONF, 0);
671 rtl818x_iowrite8(priv, &priv->map->RATE_FALLBACK, 0);
673 // TODO: set RESP_RATE and BRSR properly
674 rtl818x_iowrite8(priv, &priv->map->RESP_RATE, (8 << 4) | 0);
675 rtl818x_iowrite16(priv, &priv->map->BRSR, 0x01F3);
678 rtl818x_iowrite16(priv, &priv->map->RFPinsSelect, 0);
679 rtl818x_iowrite8(priv, &priv->map->GPIO, 0);
680 reg = rtl818x_ioread8(priv, (u8 *)0xFE53);
681 rtl818x_iowrite8(priv, (u8 *)0xFE53, reg | (1 << 7));
682 rtl818x_iowrite16(priv, &priv->map->RFPinsSelect, (4 << 8));
683 rtl818x_iowrite8(priv, &priv->map->GPIO, 0x20);
684 rtl818x_iowrite8(priv, &priv->map->GP_ENABLE, 0);
685 rtl818x_iowrite16(priv, &priv->map->RFPinsOutput, 0x80);
686 rtl818x_iowrite16(priv, &priv->map->RFPinsSelect, 0x80);
687 rtl818x_iowrite16(priv, &priv->map->RFPinsEnable, 0x80);
690 rtl818x_iowrite32(priv, &priv->map->RF_TIMING, 0x000a8008);
691 rtl818x_iowrite16(priv, &priv->map->BRSR, 0xFFFF);
692 rtl818x_iowrite32(priv, &priv->map->RF_PARA, 0x00100044);
693 rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD,
694 RTL818X_EEPROM_CMD_CONFIG);
695 rtl818x_iowrite8(priv, &priv->map->CONFIG3, 0x44);
696 rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD,
697 RTL818X_EEPROM_CMD_NORMAL);
698 rtl818x_iowrite16(priv, &priv->map->RFPinsEnable, 0x1FF7);
703 rtl818x_iowrite16(priv, &priv->map->BRSR, 0x01F3);
704 reg = rtl818x_ioread8(priv, &priv->map->PGSELECT) & ~1;
705 rtl818x_iowrite8(priv, &priv->map->PGSELECT, reg | 1);
706 rtl818x_iowrite16(priv, (__le16 *)0xFFFE, 0x10);
707 rtl818x_iowrite8(priv, &priv->map->TALLY_SEL, 0x80);
708 rtl818x_iowrite8(priv, (u8 *)0xFFFF, 0x60);
709 rtl818x_iowrite8(priv, &priv->map->PGSELECT, reg);
714 static const u8 rtl8187b_reg_table[][3] = {
715 {0xF0, 0x32, 0}, {0xF1, 0x32, 0}, {0xF2, 0x00, 0}, {0xF3, 0x00, 0},
716 {0xF4, 0x32, 0}, {0xF5, 0x43, 0}, {0xF6, 0x00, 0}, {0xF7, 0x00, 0},
717 {0xF8, 0x46, 0}, {0xF9, 0xA4, 0}, {0xFA, 0x00, 0}, {0xFB, 0x00, 0},
718 {0xFC, 0x96, 0}, {0xFD, 0xA4, 0}, {0xFE, 0x00, 0}, {0xFF, 0x00, 0},
720 {0x58, 0x4B, 1}, {0x59, 0x00, 1}, {0x5A, 0x4B, 1}, {0x5B, 0x00, 1},
721 {0x60, 0x4B, 1}, {0x61, 0x09, 1}, {0x62, 0x4B, 1}, {0x63, 0x09, 1},
722 {0xCE, 0x0F, 1}, {0xCF, 0x00, 1}, {0xE0, 0xFF, 1}, {0xE1, 0x0F, 1},
723 {0xE2, 0x00, 1}, {0xF0, 0x4E, 1}, {0xF1, 0x01, 1}, {0xF2, 0x02, 1},
724 {0xF3, 0x03, 1}, {0xF4, 0x04, 1}, {0xF5, 0x05, 1}, {0xF6, 0x06, 1},
725 {0xF7, 0x07, 1}, {0xF8, 0x08, 1},
727 {0x4E, 0x00, 2}, {0x0C, 0x04, 2}, {0x21, 0x61, 2}, {0x22, 0x68, 2},
728 {0x23, 0x6F, 2}, {0x24, 0x76, 2}, {0x25, 0x7D, 2}, {0x26, 0x84, 2},
729 {0x27, 0x8D, 2}, {0x4D, 0x08, 2}, {0x50, 0x05, 2}, {0x51, 0xF5, 2},
730 {0x52, 0x04, 2}, {0x53, 0xA0, 2}, {0x54, 0x1F, 2}, {0x55, 0x23, 2},
731 {0x56, 0x45, 2}, {0x57, 0x67, 2}, {0x58, 0x08, 2}, {0x59, 0x08, 2},
732 {0x5A, 0x08, 2}, {0x5B, 0x08, 2}, {0x60, 0x08, 2}, {0x61, 0x08, 2},
733 {0x62, 0x08, 2}, {0x63, 0x08, 2}, {0x64, 0xCF, 2}, {0x72, 0x56, 2},
736 {0x34, 0xF0, 0}, {0x35, 0x0F, 0}, {0x5B, 0x40, 0}, {0x84, 0x88, 0},
737 {0x85, 0x24, 0}, {0x88, 0x54, 0}, {0x8B, 0xB8, 0}, {0x8C, 0x07, 0},
738 {0x8D, 0x00, 0}, {0x94, 0x1B, 0}, {0x95, 0x12, 0}, {0x96, 0x00, 0},
739 {0x97, 0x06, 0}, {0x9D, 0x1A, 0}, {0x9F, 0x10, 0}, {0xB4, 0x22, 0},
740 {0xBE, 0x80, 0}, {0xDB, 0x00, 0}, {0xEE, 0x00, 0}, {0x4C, 0x00, 2},
742 {0x9F, 0x00, 3}, {0x8C, 0x01, 0}, {0x8D, 0x10, 0}, {0x8E, 0x08, 0},
746 static int rtl8187b_init_hw(struct ieee80211_hw *dev)
748 struct rtl8187_priv *priv = dev->priv;
752 rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD,
753 RTL818X_EEPROM_CMD_CONFIG);
755 reg = rtl818x_ioread8(priv, &priv->map->CONFIG3);
756 reg |= RTL818X_CONFIG3_ANAPARAM_WRITE | RTL818X_CONFIG3_GNT_SELECT;
757 rtl818x_iowrite8(priv, &priv->map->CONFIG3, reg);
758 rtl818x_iowrite32(priv, &priv->map->ANAPARAM2,
759 RTL8187B_RTL8225_ANAPARAM2_ON);
760 rtl818x_iowrite32(priv, &priv->map->ANAPARAM,
761 RTL8187B_RTL8225_ANAPARAM_ON);
762 rtl818x_iowrite8(priv, &priv->map->ANAPARAM3,
763 RTL8187B_RTL8225_ANAPARAM3_ON);
765 rtl818x_iowrite8(priv, (u8 *)0xFF61, 0x10);
766 reg = rtl818x_ioread8(priv, (u8 *)0xFF62);
767 rtl818x_iowrite8(priv, (u8 *)0xFF62, reg & ~(1 << 5));
768 rtl818x_iowrite8(priv, (u8 *)0xFF62, reg | (1 << 5));
770 reg = rtl818x_ioread8(priv, &priv->map->CONFIG3);
771 reg &= ~RTL818X_CONFIG3_ANAPARAM_WRITE;
772 rtl818x_iowrite8(priv, &priv->map->CONFIG3, reg);
774 rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD,
775 RTL818X_EEPROM_CMD_NORMAL);
777 res = rtl8187_cmd_reset(dev);
781 rtl818x_iowrite16(priv, (__le16 *)0xFF2D, 0x0FFF);
782 reg = rtl818x_ioread8(priv, &priv->map->CW_CONF);
783 reg |= RTL818X_CW_CONF_PERPACKET_RETRY_SHIFT;
784 rtl818x_iowrite8(priv, &priv->map->CW_CONF, reg);
785 reg = rtl818x_ioread8(priv, &priv->map->TX_AGC_CTL);
786 reg |= RTL818X_TX_AGC_CTL_PERPACKET_GAIN_SHIFT |
787 RTL818X_TX_AGC_CTL_PERPACKET_ANTSEL_SHIFT;
788 rtl818x_iowrite8(priv, &priv->map->TX_AGC_CTL, reg);
790 rtl818x_iowrite16_idx(priv, (__le16 *)0xFFE0, 0x0FFF, 1);
792 rtl818x_iowrite16(priv, &priv->map->BEACON_INTERVAL, 100);
793 rtl818x_iowrite16(priv, &priv->map->ATIM_WND, 2);
794 rtl818x_iowrite16_idx(priv, (__le16 *)0xFFD4, 0xFFFF, 1);
796 rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD,
797 RTL818X_EEPROM_CMD_CONFIG);
798 reg = rtl818x_ioread8(priv, &priv->map->CONFIG1);
799 rtl818x_iowrite8(priv, &priv->map->CONFIG1, (reg & 0x3F) | 0x80);
800 rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD,
801 RTL818X_EEPROM_CMD_NORMAL);
803 rtl818x_iowrite8(priv, &priv->map->WPA_CONF, 0);
804 for (i = 0; i < ARRAY_SIZE(rtl8187b_reg_table); i++) {
805 rtl818x_iowrite8_idx(priv,
807 (rtl8187b_reg_table[i][0] | 0xFF00),
808 rtl8187b_reg_table[i][1],
809 rtl8187b_reg_table[i][2]);
812 rtl818x_iowrite16(priv, &priv->map->TID_AC_MAP, 0xFA50);
813 rtl818x_iowrite16(priv, &priv->map->INT_MIG, 0);
815 rtl818x_iowrite32_idx(priv, (__le32 *)0xFFF0, 0, 1);
816 rtl818x_iowrite32_idx(priv, (__le32 *)0xFFF4, 0, 1);
817 rtl818x_iowrite8_idx(priv, (u8 *)0xFFF8, 0, 1);
819 rtl818x_iowrite32(priv, &priv->map->RF_TIMING, 0x00004001);
821 rtl818x_iowrite16_idx(priv, (__le16 *)0xFF72, 0x569A, 2);
823 rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD,
824 RTL818X_EEPROM_CMD_CONFIG);
825 reg = rtl818x_ioread8(priv, &priv->map->CONFIG3);
826 reg |= RTL818X_CONFIG3_ANAPARAM_WRITE;
827 rtl818x_iowrite8(priv, &priv->map->CONFIG3, reg);
828 rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD,
829 RTL818X_EEPROM_CMD_NORMAL);
831 rtl818x_iowrite16(priv, &priv->map->RFPinsOutput, 0x0480);
832 rtl818x_iowrite16(priv, &priv->map->RFPinsSelect, 0x2488);
833 rtl818x_iowrite16(priv, &priv->map->RFPinsEnable, 0x1FFF);
838 reg = RTL818X_CMD_TX_ENABLE | RTL818X_CMD_RX_ENABLE;
839 rtl818x_iowrite8(priv, &priv->map->CMD, reg);
840 rtl818x_iowrite16(priv, &priv->map->INT_MASK, 0xFFFF);
842 rtl818x_iowrite8(priv, (u8 *)0xFE41, 0xF4);
843 rtl818x_iowrite8(priv, (u8 *)0xFE40, 0x00);
844 rtl818x_iowrite8(priv, (u8 *)0xFE42, 0x00);
845 rtl818x_iowrite8(priv, (u8 *)0xFE42, 0x01);
846 rtl818x_iowrite8(priv, (u8 *)0xFE40, 0x0F);
847 rtl818x_iowrite8(priv, (u8 *)0xFE42, 0x00);
848 rtl818x_iowrite8(priv, (u8 *)0xFE42, 0x01);
850 reg = rtl818x_ioread8(priv, (u8 *)0xFFDB);
851 rtl818x_iowrite8(priv, (u8 *)0xFFDB, reg | (1 << 2));
852 rtl818x_iowrite16_idx(priv, (__le16 *)0xFF72, 0x59FA, 3);
853 rtl818x_iowrite16_idx(priv, (__le16 *)0xFF74, 0x59D2, 3);
854 rtl818x_iowrite16_idx(priv, (__le16 *)0xFF76, 0x59D2, 3);
855 rtl818x_iowrite16_idx(priv, (__le16 *)0xFF78, 0x19FA, 3);
856 rtl818x_iowrite16_idx(priv, (__le16 *)0xFF7A, 0x19FA, 3);
857 rtl818x_iowrite16_idx(priv, (__le16 *)0xFF7C, 0x00D0, 3);
858 rtl818x_iowrite8(priv, (u8 *)0xFF61, 0);
859 rtl818x_iowrite8_idx(priv, (u8 *)0xFF80, 0x0F, 1);
860 rtl818x_iowrite8_idx(priv, (u8 *)0xFF83, 0x03, 1);
861 rtl818x_iowrite8(priv, (u8 *)0xFFDA, 0x10);
862 rtl818x_iowrite8_idx(priv, (u8 *)0xFF4D, 0x08, 2);
864 rtl818x_iowrite32(priv, &priv->map->HSSI_PARA, 0x0600321B);
866 rtl818x_iowrite16_idx(priv, (__le16 *)0xFFEC, 0x0800, 1);
868 priv->slot_time = 0x9;
869 priv->aifsn[0] = 2; /* AIFSN[AC_VO] */
870 priv->aifsn[1] = 2; /* AIFSN[AC_VI] */
871 priv->aifsn[2] = 7; /* AIFSN[AC_BK] */
872 priv->aifsn[3] = 3; /* AIFSN[AC_BE] */
873 rtl818x_iowrite8(priv, &priv->map->ACM_CONTROL, 0);
878 static void rtl8187_work(struct work_struct *work)
880 /* The RTL8187 returns the retry count through register 0xFFFA. In
881 * addition, it appears to be a cumulative retry count, not the
882 * value for the current TX packet. When multiple TX entries are
883 * queued, the retry count will be valid for the last one in the queue.
884 * The "error" should not matter for purposes of rate setting. */
885 struct rtl8187_priv *priv = container_of(work, struct rtl8187_priv,
887 struct ieee80211_tx_info *info;
888 struct ieee80211_hw *dev = priv->dev;
892 mutex_lock(&priv->conf_mutex);
893 tmp = rtl818x_ioread16(priv, (__le16 *)0xFFFA);
894 while (skb_queue_len(&priv->b_tx_status.queue) > 0) {
895 struct sk_buff *old_skb;
897 old_skb = skb_dequeue(&priv->b_tx_status.queue);
898 info = IEEE80211_SKB_CB(old_skb);
899 info->status.rates[0].count = tmp - retry + 1;
900 ieee80211_tx_status_irqsafe(dev, old_skb);
903 mutex_unlock(&priv->conf_mutex);
906 static int rtl8187_start(struct ieee80211_hw *dev)
908 struct rtl8187_priv *priv = dev->priv;
912 ret = (!priv->is_rtl8187b) ? rtl8187_init_hw(dev) :
913 rtl8187b_init_hw(dev);
917 mutex_lock(&priv->conf_mutex);
919 init_usb_anchor(&priv->anchored);
922 if (priv->is_rtl8187b) {
923 reg = RTL818X_RX_CONF_MGMT |
924 RTL818X_RX_CONF_DATA |
925 RTL818X_RX_CONF_BROADCAST |
926 RTL818X_RX_CONF_NICMAC |
927 RTL818X_RX_CONF_BSSID |
928 (7 << 13 /* RX FIFO threshold NONE */) |
929 (7 << 10 /* MAX RX DMA */) |
930 RTL818X_RX_CONF_RX_AUTORESETPHY |
931 RTL818X_RX_CONF_ONLYERLPKT |
932 RTL818X_RX_CONF_MULTICAST;
934 rtl818x_iowrite32(priv, &priv->map->RX_CONF, reg);
936 rtl818x_iowrite32(priv, &priv->map->TX_CONF,
937 RTL818X_TX_CONF_HW_SEQNUM |
938 RTL818X_TX_CONF_DISREQQSIZE |
939 (7 << 8 /* short retry limit */) |
940 (7 << 0 /* long retry limit */) |
941 (7 << 21 /* MAX TX DMA */));
942 rtl8187_init_urbs(dev);
943 rtl8187b_init_status_urb(dev);
944 mutex_unlock(&priv->conf_mutex);
948 rtl818x_iowrite16(priv, &priv->map->INT_MASK, 0xFFFF);
950 rtl818x_iowrite32(priv, &priv->map->MAR[0], ~0);
951 rtl818x_iowrite32(priv, &priv->map->MAR[1], ~0);
953 rtl8187_init_urbs(dev);
955 reg = RTL818X_RX_CONF_ONLYERLPKT |
956 RTL818X_RX_CONF_RX_AUTORESETPHY |
957 RTL818X_RX_CONF_BSSID |
958 RTL818X_RX_CONF_MGMT |
959 RTL818X_RX_CONF_DATA |
960 (7 << 13 /* RX FIFO threshold NONE */) |
961 (7 << 10 /* MAX RX DMA */) |
962 RTL818X_RX_CONF_BROADCAST |
963 RTL818X_RX_CONF_NICMAC;
966 rtl818x_iowrite32(priv, &priv->map->RX_CONF, reg);
968 reg = rtl818x_ioread8(priv, &priv->map->CW_CONF);
969 reg &= ~RTL818X_CW_CONF_PERPACKET_CW_SHIFT;
970 reg |= RTL818X_CW_CONF_PERPACKET_RETRY_SHIFT;
971 rtl818x_iowrite8(priv, &priv->map->CW_CONF, reg);
973 reg = rtl818x_ioread8(priv, &priv->map->TX_AGC_CTL);
974 reg &= ~RTL818X_TX_AGC_CTL_PERPACKET_GAIN_SHIFT;
975 reg &= ~RTL818X_TX_AGC_CTL_PERPACKET_ANTSEL_SHIFT;
976 reg &= ~RTL818X_TX_AGC_CTL_FEEDBACK_ANT;
977 rtl818x_iowrite8(priv, &priv->map->TX_AGC_CTL, reg);
979 reg = RTL818X_TX_CONF_CW_MIN |
980 (7 << 21 /* MAX TX DMA */) |
981 RTL818X_TX_CONF_NO_ICV;
982 rtl818x_iowrite32(priv, &priv->map->TX_CONF, reg);
984 reg = rtl818x_ioread8(priv, &priv->map->CMD);
985 reg |= RTL818X_CMD_TX_ENABLE;
986 reg |= RTL818X_CMD_RX_ENABLE;
987 rtl818x_iowrite8(priv, &priv->map->CMD, reg);
988 INIT_DELAYED_WORK(&priv->work, rtl8187_work);
989 mutex_unlock(&priv->conf_mutex);
994 static void rtl8187_stop(struct ieee80211_hw *dev)
996 struct rtl8187_priv *priv = dev->priv;
1000 mutex_lock(&priv->conf_mutex);
1001 rtl818x_iowrite16(priv, &priv->map->INT_MASK, 0);
1003 reg = rtl818x_ioread8(priv, &priv->map->CMD);
1004 reg &= ~RTL818X_CMD_TX_ENABLE;
1005 reg &= ~RTL818X_CMD_RX_ENABLE;
1006 rtl818x_iowrite8(priv, &priv->map->CMD, reg);
1008 priv->rf->stop(dev);
1010 rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD, RTL818X_EEPROM_CMD_CONFIG);
1011 reg = rtl818x_ioread8(priv, &priv->map->CONFIG4);
1012 rtl818x_iowrite8(priv, &priv->map->CONFIG4, reg | RTL818X_CONFIG4_VCOOFF);
1013 rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD, RTL818X_EEPROM_CMD_NORMAL);
1015 while ((skb = skb_dequeue(&priv->b_tx_status.queue)))
1016 dev_kfree_skb_any(skb);
1018 usb_kill_anchored_urbs(&priv->anchored);
1019 if (!priv->is_rtl8187b)
1020 cancel_delayed_work_sync(&priv->work);
1021 mutex_unlock(&priv->conf_mutex);
1024 static int rtl8187_add_interface(struct ieee80211_hw *dev,
1025 struct ieee80211_if_init_conf *conf)
1027 struct rtl8187_priv *priv = dev->priv;
1029 int ret = -EOPNOTSUPP;
1031 mutex_lock(&priv->conf_mutex);
1032 if (priv->mode != NL80211_IFTYPE_MONITOR)
1035 switch (conf->type) {
1036 case NL80211_IFTYPE_STATION:
1037 priv->mode = conf->type;
1044 priv->vif = conf->vif;
1046 rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD, RTL818X_EEPROM_CMD_CONFIG);
1047 for (i = 0; i < ETH_ALEN; i++)
1048 rtl818x_iowrite8(priv, &priv->map->MAC[i],
1049 ((u8 *)conf->mac_addr)[i]);
1050 rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD, RTL818X_EEPROM_CMD_NORMAL);
1053 mutex_unlock(&priv->conf_mutex);
1057 static void rtl8187_remove_interface(struct ieee80211_hw *dev,
1058 struct ieee80211_if_init_conf *conf)
1060 struct rtl8187_priv *priv = dev->priv;
1061 mutex_lock(&priv->conf_mutex);
1062 priv->mode = NL80211_IFTYPE_MONITOR;
1064 mutex_unlock(&priv->conf_mutex);
1067 static int rtl8187_config(struct ieee80211_hw *dev, u32 changed)
1069 struct rtl8187_priv *priv = dev->priv;
1070 struct ieee80211_conf *conf = &dev->conf;
1073 mutex_lock(&priv->conf_mutex);
1074 reg = rtl818x_ioread32(priv, &priv->map->TX_CONF);
1075 /* Enable TX loopback on MAC level to avoid TX during channel
1076 * changes, as this has be seen to causes problems and the
1077 * card will stop work until next reset
1079 rtl818x_iowrite32(priv, &priv->map->TX_CONF,
1080 reg | RTL818X_TX_CONF_LOOPBACK_MAC);
1081 priv->rf->set_chan(dev, conf);
1083 rtl818x_iowrite32(priv, &priv->map->TX_CONF, reg);
1085 rtl818x_iowrite16(priv, &priv->map->ATIM_WND, 2);
1086 rtl818x_iowrite16(priv, &priv->map->ATIMTR_INTERVAL, 100);
1087 rtl818x_iowrite16(priv, &priv->map->BEACON_INTERVAL, 100);
1088 rtl818x_iowrite16(priv, &priv->map->BEACON_INTERVAL_TIME, 100);
1089 mutex_unlock(&priv->conf_mutex);
1094 * With 8187B, AC_*_PARAM clashes with FEMR definition in struct rtl818x_csr for
1095 * example. Thus we have to use raw values for AC_*_PARAM register addresses.
1097 static __le32 *rtl8187b_ac_addr[4] = {
1098 (__le32 *) 0xFFF0, /* AC_VO */
1099 (__le32 *) 0xFFF4, /* AC_VI */
1100 (__le32 *) 0xFFFC, /* AC_BK */
1101 (__le32 *) 0xFFF8, /* AC_BE */
1104 #define SIFS_TIME 0xa
1106 static void rtl8187_conf_erp(struct rtl8187_priv *priv, bool use_short_slot,
1107 bool use_short_preamble)
1109 if (priv->is_rtl8187b) {
1114 if (use_short_slot) {
1115 priv->slot_time = 0x9;
1119 priv->slot_time = 0x14;
1123 rtl818x_iowrite8(priv, &priv->map->SIFS, 0x22);
1124 rtl818x_iowrite8(priv, &priv->map->SLOT, priv->slot_time);
1125 rtl818x_iowrite8(priv, &priv->map->DIFS, difs);
1128 * BRSR+1 on 8187B is in fact EIFS register
1129 * Value in units of 4 us
1131 rtl818x_iowrite8(priv, (u8 *)&priv->map->BRSR + 1, eifs);
1134 * For 8187B, CARRIER_SENSE_COUNTER is in fact ack timeout
1135 * register. In units of 4 us like eifs register
1136 * ack_timeout = ack duration + plcp + difs + preamble
1138 ack_timeout = 112 + 48 + difs;
1139 if (use_short_preamble)
1143 rtl818x_iowrite8(priv, &priv->map->CARRIER_SENSE_COUNTER,
1144 DIV_ROUND_UP(ack_timeout, 4));
1146 for (queue = 0; queue < 4; queue++)
1147 rtl818x_iowrite8(priv, (u8 *) rtl8187b_ac_addr[queue],
1148 priv->aifsn[queue] * priv->slot_time +
1151 rtl818x_iowrite8(priv, &priv->map->SIFS, 0x22);
1152 if (use_short_slot) {
1153 rtl818x_iowrite8(priv, &priv->map->SLOT, 0x9);
1154 rtl818x_iowrite8(priv, &priv->map->DIFS, 0x14);
1155 rtl818x_iowrite8(priv, &priv->map->EIFS, 91 - 0x14);
1157 rtl818x_iowrite8(priv, &priv->map->SLOT, 0x14);
1158 rtl818x_iowrite8(priv, &priv->map->DIFS, 0x24);
1159 rtl818x_iowrite8(priv, &priv->map->EIFS, 91 - 0x24);
1164 static void rtl8187_bss_info_changed(struct ieee80211_hw *dev,
1165 struct ieee80211_vif *vif,
1166 struct ieee80211_bss_conf *info,
1169 struct rtl8187_priv *priv = dev->priv;
1173 if (changed & BSS_CHANGED_BSSID) {
1174 mutex_lock(&priv->conf_mutex);
1175 for (i = 0; i < ETH_ALEN; i++)
1176 rtl818x_iowrite8(priv, &priv->map->BSSID[i],
1179 if (is_valid_ether_addr(info->bssid)) {
1180 reg = RTL818X_MSR_INFRA;
1181 if (priv->is_rtl8187b)
1182 reg |= RTL818X_MSR_ENEDCA;
1183 rtl818x_iowrite8(priv, &priv->map->MSR, reg);
1185 reg = RTL818X_MSR_NO_LINK;
1186 rtl818x_iowrite8(priv, &priv->map->MSR, reg);
1189 mutex_unlock(&priv->conf_mutex);
1192 if (changed & (BSS_CHANGED_ERP_SLOT | BSS_CHANGED_ERP_PREAMBLE))
1193 rtl8187_conf_erp(priv, info->use_short_slot,
1194 info->use_short_preamble);
1197 static void rtl8187_configure_filter(struct ieee80211_hw *dev,
1198 unsigned int changed_flags,
1199 unsigned int *total_flags,
1200 int mc_count, struct dev_addr_list *mclist)
1202 struct rtl8187_priv *priv = dev->priv;
1204 if (changed_flags & FIF_FCSFAIL)
1205 priv->rx_conf ^= RTL818X_RX_CONF_FCS;
1206 if (changed_flags & FIF_CONTROL)
1207 priv->rx_conf ^= RTL818X_RX_CONF_CTRL;
1208 if (changed_flags & FIF_OTHER_BSS)
1209 priv->rx_conf ^= RTL818X_RX_CONF_MONITOR;
1210 if (*total_flags & FIF_ALLMULTI || mc_count > 0)
1211 priv->rx_conf |= RTL818X_RX_CONF_MULTICAST;
1213 priv->rx_conf &= ~RTL818X_RX_CONF_MULTICAST;
1217 if (priv->rx_conf & RTL818X_RX_CONF_FCS)
1218 *total_flags |= FIF_FCSFAIL;
1219 if (priv->rx_conf & RTL818X_RX_CONF_CTRL)
1220 *total_flags |= FIF_CONTROL;
1221 if (priv->rx_conf & RTL818X_RX_CONF_MONITOR)
1222 *total_flags |= FIF_OTHER_BSS;
1223 if (priv->rx_conf & RTL818X_RX_CONF_MULTICAST)
1224 *total_flags |= FIF_ALLMULTI;
1226 rtl818x_iowrite32_async(priv, &priv->map->RX_CONF, priv->rx_conf);
1229 static int rtl8187_conf_tx(struct ieee80211_hw *dev, u16 queue,
1230 const struct ieee80211_tx_queue_params *params)
1232 struct rtl8187_priv *priv = dev->priv;
1238 cw_min = fls(params->cw_min);
1239 cw_max = fls(params->cw_max);
1241 if (priv->is_rtl8187b) {
1242 priv->aifsn[queue] = params->aifs;
1245 * This is the structure of AC_*_PARAM registers in 8187B:
1246 * - TXOP limit field, bit offset = 16
1247 * - ECWmax, bit offset = 12
1248 * - ECWmin, bit offset = 8
1249 * - AIFS, bit offset = 0
1251 rtl818x_iowrite32(priv, rtl8187b_ac_addr[queue],
1252 (params->txop << 16) | (cw_max << 12) |
1253 (cw_min << 8) | (params->aifs *
1254 priv->slot_time + SIFS_TIME));
1259 rtl818x_iowrite8(priv, &priv->map->CW_VAL,
1260 cw_min | (cw_max << 4));
1265 static const struct ieee80211_ops rtl8187_ops = {
1267 .start = rtl8187_start,
1268 .stop = rtl8187_stop,
1269 .add_interface = rtl8187_add_interface,
1270 .remove_interface = rtl8187_remove_interface,
1271 .config = rtl8187_config,
1272 .bss_info_changed = rtl8187_bss_info_changed,
1273 .configure_filter = rtl8187_configure_filter,
1274 .conf_tx = rtl8187_conf_tx
1277 static void rtl8187_eeprom_register_read(struct eeprom_93cx6 *eeprom)
1279 struct ieee80211_hw *dev = eeprom->data;
1280 struct rtl8187_priv *priv = dev->priv;
1281 u8 reg = rtl818x_ioread8(priv, &priv->map->EEPROM_CMD);
1283 eeprom->reg_data_in = reg & RTL818X_EEPROM_CMD_WRITE;
1284 eeprom->reg_data_out = reg & RTL818X_EEPROM_CMD_READ;
1285 eeprom->reg_data_clock = reg & RTL818X_EEPROM_CMD_CK;
1286 eeprom->reg_chip_select = reg & RTL818X_EEPROM_CMD_CS;
1289 static void rtl8187_eeprom_register_write(struct eeprom_93cx6 *eeprom)
1291 struct ieee80211_hw *dev = eeprom->data;
1292 struct rtl8187_priv *priv = dev->priv;
1293 u8 reg = RTL818X_EEPROM_CMD_PROGRAM;
1295 if (eeprom->reg_data_in)
1296 reg |= RTL818X_EEPROM_CMD_WRITE;
1297 if (eeprom->reg_data_out)
1298 reg |= RTL818X_EEPROM_CMD_READ;
1299 if (eeprom->reg_data_clock)
1300 reg |= RTL818X_EEPROM_CMD_CK;
1301 if (eeprom->reg_chip_select)
1302 reg |= RTL818X_EEPROM_CMD_CS;
1304 rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD, reg);
1308 static int __devinit rtl8187_probe(struct usb_interface *intf,
1309 const struct usb_device_id *id)
1311 struct usb_device *udev = interface_to_usbdev(intf);
1312 struct ieee80211_hw *dev;
1313 struct rtl8187_priv *priv;
1314 struct eeprom_93cx6 eeprom;
1315 struct ieee80211_channel *channel;
1316 const char *chip_name;
1320 dev = ieee80211_alloc_hw(sizeof(*priv), &rtl8187_ops);
1322 printk(KERN_ERR "rtl8187: ieee80211 alloc failed\n");
1327 priv->is_rtl8187b = (id->driver_info == DEVICE_RTL8187B);
1329 /* allocate "DMA aware" buffer for register accesses */
1330 priv->io_dmabuf = kmalloc(sizeof(*priv->io_dmabuf), GFP_KERNEL);
1331 if (!priv->io_dmabuf) {
1335 mutex_init(&priv->io_mutex);
1337 SET_IEEE80211_DEV(dev, &intf->dev);
1338 usb_set_intfdata(intf, dev);
1343 skb_queue_head_init(&priv->rx_queue);
1345 BUILD_BUG_ON(sizeof(priv->channels) != sizeof(rtl818x_channels));
1346 BUILD_BUG_ON(sizeof(priv->rates) != sizeof(rtl818x_rates));
1348 memcpy(priv->channels, rtl818x_channels, sizeof(rtl818x_channels));
1349 memcpy(priv->rates, rtl818x_rates, sizeof(rtl818x_rates));
1350 priv->map = (struct rtl818x_csr *)0xFF00;
1352 priv->band.band = IEEE80211_BAND_2GHZ;
1353 priv->band.channels = priv->channels;
1354 priv->band.n_channels = ARRAY_SIZE(rtl818x_channels);
1355 priv->band.bitrates = priv->rates;
1356 priv->band.n_bitrates = ARRAY_SIZE(rtl818x_rates);
1357 dev->wiphy->bands[IEEE80211_BAND_2GHZ] = &priv->band;
1360 priv->mode = NL80211_IFTYPE_MONITOR;
1361 dev->flags = IEEE80211_HW_HOST_BROADCAST_PS_BUFFERING |
1362 IEEE80211_HW_SIGNAL_DBM |
1363 IEEE80211_HW_RX_INCLUDES_FCS;
1366 eeprom.register_read = rtl8187_eeprom_register_read;
1367 eeprom.register_write = rtl8187_eeprom_register_write;
1368 if (rtl818x_ioread32(priv, &priv->map->RX_CONF) & (1 << 6))
1369 eeprom.width = PCI_EEPROM_WIDTH_93C66;
1371 eeprom.width = PCI_EEPROM_WIDTH_93C46;
1373 rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD, RTL818X_EEPROM_CMD_CONFIG);
1376 eeprom_93cx6_multiread(&eeprom, RTL8187_EEPROM_MAC_ADDR,
1377 (__le16 __force *)dev->wiphy->perm_addr, 3);
1378 if (!is_valid_ether_addr(dev->wiphy->perm_addr)) {
1379 printk(KERN_WARNING "rtl8187: Invalid hwaddr! Using randomly "
1380 "generated MAC address\n");
1381 random_ether_addr(dev->wiphy->perm_addr);
1384 channel = priv->channels;
1385 for (i = 0; i < 3; i++) {
1386 eeprom_93cx6_read(&eeprom, RTL8187_EEPROM_TXPWR_CHAN_1 + i,
1388 (*channel++).hw_value = txpwr & 0xFF;
1389 (*channel++).hw_value = txpwr >> 8;
1391 for (i = 0; i < 2; i++) {
1392 eeprom_93cx6_read(&eeprom, RTL8187_EEPROM_TXPWR_CHAN_4 + i,
1394 (*channel++).hw_value = txpwr & 0xFF;
1395 (*channel++).hw_value = txpwr >> 8;
1398 eeprom_93cx6_read(&eeprom, RTL8187_EEPROM_TXPWR_BASE,
1401 reg = rtl818x_ioread8(priv, &priv->map->PGSELECT) & ~1;
1402 rtl818x_iowrite8(priv, &priv->map->PGSELECT, reg | 1);
1403 /* 0 means asic B-cut, we should use SW 3 wire
1404 * bit-by-bit banging for radio. 1 means we can use
1405 * USB specific request to write radio registers */
1406 priv->asic_rev = rtl818x_ioread8(priv, (u8 *)0xFFFE) & 0x3;
1407 rtl818x_iowrite8(priv, &priv->map->PGSELECT, reg);
1408 rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD, RTL818X_EEPROM_CMD_NORMAL);
1410 if (!priv->is_rtl8187b) {
1412 reg32 = rtl818x_ioread32(priv, &priv->map->TX_CONF);
1413 reg32 &= RTL818X_TX_CONF_HWVER_MASK;
1415 case RTL818X_TX_CONF_R8187vD_B:
1416 /* Some RTL8187B devices have a USB ID of 0x8187
1417 * detect them here */
1418 chip_name = "RTL8187BvB(early)";
1419 priv->is_rtl8187b = 1;
1420 priv->hw_rev = RTL8187BvB;
1422 case RTL818X_TX_CONF_R8187vD:
1423 chip_name = "RTL8187vD";
1426 chip_name = "RTL8187vB (default)";
1430 * Force USB request to write radio registers for 8187B, Realtek
1431 * only uses it in their sources
1433 /*if (priv->asic_rev == 0) {
1434 printk(KERN_WARNING "rtl8187: Forcing use of USB "
1435 "requests to write to radio registers\n");
1438 switch (rtl818x_ioread8(priv, (u8 *)0xFFE1)) {
1439 case RTL818X_R8187B_B:
1440 chip_name = "RTL8187BvB";
1441 priv->hw_rev = RTL8187BvB;
1443 case RTL818X_R8187B_D:
1444 chip_name = "RTL8187BvD";
1445 priv->hw_rev = RTL8187BvD;
1447 case RTL818X_R8187B_E:
1448 chip_name = "RTL8187BvE";
1449 priv->hw_rev = RTL8187BvE;
1452 chip_name = "RTL8187BvB (default)";
1453 priv->hw_rev = RTL8187BvB;
1457 if (!priv->is_rtl8187b) {
1458 for (i = 0; i < 2; i++) {
1459 eeprom_93cx6_read(&eeprom,
1460 RTL8187_EEPROM_TXPWR_CHAN_6 + i,
1462 (*channel++).hw_value = txpwr & 0xFF;
1463 (*channel++).hw_value = txpwr >> 8;
1466 eeprom_93cx6_read(&eeprom, RTL8187_EEPROM_TXPWR_CHAN_6,
1468 (*channel++).hw_value = txpwr & 0xFF;
1470 eeprom_93cx6_read(&eeprom, 0x0A, &txpwr);
1471 (*channel++).hw_value = txpwr & 0xFF;
1473 eeprom_93cx6_read(&eeprom, 0x1C, &txpwr);
1474 (*channel++).hw_value = txpwr & 0xFF;
1475 (*channel++).hw_value = txpwr >> 8;
1479 * XXX: Once this driver supports anything that requires
1480 * beacons it must implement IEEE80211_TX_CTL_ASSIGN_SEQ.
1482 dev->wiphy->interface_modes = BIT(NL80211_IFTYPE_STATION);
1484 if ((id->driver_info == DEVICE_RTL8187) && priv->is_rtl8187b)
1485 printk(KERN_INFO "rtl8187: inconsistency between id with OEM"
1488 priv->rf = rtl8187_detect_rf(dev);
1489 dev->extra_tx_headroom = (!priv->is_rtl8187b) ?
1490 sizeof(struct rtl8187_tx_hdr) :
1491 sizeof(struct rtl8187b_tx_hdr);
1492 if (!priv->is_rtl8187b)
1497 err = ieee80211_register_hw(dev);
1499 printk(KERN_ERR "rtl8187: Cannot register device\n");
1500 goto err_free_dmabuf;
1502 mutex_init(&priv->conf_mutex);
1503 skb_queue_head_init(&priv->b_tx_status.queue);
1505 printk(KERN_INFO "%s: hwaddr %pM, %s V%d + %s\n",
1506 wiphy_name(dev->wiphy), dev->wiphy->perm_addr,
1507 chip_name, priv->asic_rev, priv->rf->name);
1509 #ifdef CONFIG_RTL8187_LEDS
1510 eeprom_93cx6_read(&eeprom, 0x3F, ®);
1512 rtl8187_leds_init(dev, reg);
1518 kfree(priv->io_dmabuf);
1520 ieee80211_free_hw(dev);
1521 usb_set_intfdata(intf, NULL);
1526 static void __devexit rtl8187_disconnect(struct usb_interface *intf)
1528 struct ieee80211_hw *dev = usb_get_intfdata(intf);
1529 struct rtl8187_priv *priv;
1534 #ifdef CONFIG_RTL8187_LEDS
1535 rtl8187_leds_exit(dev);
1537 ieee80211_unregister_hw(dev);
1540 usb_reset_device(priv->udev);
1541 usb_put_dev(interface_to_usbdev(intf));
1542 kfree(priv->io_dmabuf);
1543 ieee80211_free_hw(dev);
1546 static struct usb_driver rtl8187_driver = {
1547 .name = KBUILD_MODNAME,
1548 .id_table = rtl8187_table,
1549 .probe = rtl8187_probe,
1550 .disconnect = __devexit_p(rtl8187_disconnect),
1553 static int __init rtl8187_init(void)
1555 return usb_register(&rtl8187_driver);
1558 static void __exit rtl8187_exit(void)
1560 usb_deregister(&rtl8187_driver);
1563 module_init(rtl8187_init);
1564 module_exit(rtl8187_exit);