Merge git://git.kernel.org/pub/scm/linux/kernel/git/mingo/linux-2.6-sched
[linux-2.6] / drivers / usb / serial / io_edgeport.c
1 /*
2  * Edgeport USB Serial Converter driver
3  *
4  * Copyright (C) 2000 Inside Out Networks, All rights reserved.
5  * Copyright (C) 2001-2002 Greg Kroah-Hartman <greg@kroah.com>
6  *
7  *      This program is free software; you can redistribute it and/or modify
8  *      it under the terms of the GNU General Public License as published by
9  *      the Free Software Foundation; either version 2 of the License, or
10  *      (at your option) any later version.
11  *
12  * Supports the following devices:
13  *      Edgeport/4
14  *      Edgeport/4t
15  *      Edgeport/2
16  *      Edgeport/4i
17  *      Edgeport/2i
18  *      Edgeport/421
19  *      Edgeport/21
20  *      Rapidport/4
21  *      Edgeport/8
22  *      Edgeport/2D8
23  *      Edgeport/4D8
24  *      Edgeport/8i
25  *
26  * For questions or problems with this driver, contact Inside Out
27  * Networks technical support, or Peter Berger <pberger@brimson.com>,
28  * or Al Borchers <alborchers@steinerpoint.com>.
29  *
30  */
31
32 #include <linux/kernel.h>
33 #include <linux/jiffies.h>
34 #include <linux/errno.h>
35 #include <linux/init.h>
36 #include <linux/slab.h>
37 #include <linux/tty.h>
38 #include <linux/tty_driver.h>
39 #include <linux/tty_flip.h>
40 #include <linux/module.h>
41 #include <linux/spinlock.h>
42 #include <linux/serial.h>
43 #include <linux/ioctl.h>
44 #include <linux/wait.h>
45 #include <asm/uaccess.h>
46 #include <linux/usb.h>
47 #include <linux/usb/serial.h>
48 #include "io_edgeport.h"
49 #include "io_ionsp.h"           /* info for the iosp messages */
50 #include "io_16654.h"           /* 16654 UART defines */
51
52 /*
53  * Version Information
54  */
55 #define DRIVER_VERSION "v2.7"
56 #define DRIVER_AUTHOR "Greg Kroah-Hartman <greg@kroah.com> and David Iacovelli"
57 #define DRIVER_DESC "Edgeport USB Serial Driver"
58
59 /* First, the latest boot code - for first generation edgeports */
60 #define IMAGE_ARRAY_NAME        BootCodeImage_GEN1
61 #define IMAGE_VERSION_NAME      BootCodeImageVersion_GEN1
62 #include "io_fw_boot.h"         /* the bootloader firmware to download to a device, if it needs it */
63
64 /* for second generation edgeports */
65 #define IMAGE_ARRAY_NAME        BootCodeImage_GEN2
66 #define IMAGE_VERSION_NAME      BootCodeImageVersion_GEN2
67 #include "io_fw_boot2.h"        /* the bootloader firmware to download to a device, if it needs it */
68
69 /* Then finally the main run-time operational code - for first generation edgeports */
70 #define IMAGE_ARRAY_NAME        OperationalCodeImage_GEN1
71 #define IMAGE_VERSION_NAME      OperationalCodeImageVersion_GEN1
72 #include "io_fw_down.h"         /* Define array OperationalCodeImage[] */
73
74 /* for second generation edgeports */
75 #define IMAGE_ARRAY_NAME        OperationalCodeImage_GEN2
76 #define IMAGE_VERSION_NAME      OperationalCodeImageVersion_GEN2
77 #include "io_fw_down2.h"        /* Define array OperationalCodeImage[] */
78
79 #define MAX_NAME_LEN            64
80
81 #define CHASE_TIMEOUT           (5*HZ)          /* 5 seconds */
82 #define OPEN_TIMEOUT            (5*HZ)          /* 5 seconds */
83 #define COMMAND_TIMEOUT         (5*HZ)          /* 5 seconds */
84
85 /* receive port state */
86 enum RXSTATE {
87         EXPECT_HDR1 = 0,        /* Expect header byte 1 */
88         EXPECT_HDR2 = 1,        /* Expect header byte 2 */
89         EXPECT_DATA = 2,        /* Expect 'RxBytesRemaining' data */
90         EXPECT_HDR3 = 3,        /* Expect header byte 3 (for status hdrs only) */
91 };
92
93
94 /* Transmit Fifo 
95  * This Transmit queue is an extension of the edgeport Rx buffer. 
96  * The maximum amount of data buffered in both the edgeport 
97  * Rx buffer (maxTxCredits) and this buffer will never exceed maxTxCredits.
98  */
99 struct TxFifo {
100         unsigned int    head;   /* index to head pointer (write) */
101         unsigned int    tail;   /* index to tail pointer (read)  */
102         unsigned int    count;  /* Bytes in queue */
103         unsigned int    size;   /* Max size of queue (equal to Max number of TxCredits) */
104         unsigned char   *fifo;  /* allocated Buffer */
105 };
106
107 /* This structure holds all of the local port information */
108 struct edgeport_port {
109         __u16                   txCredits;              /* our current credits for this port */
110         __u16                   maxTxCredits;           /* the max size of the port */
111
112         struct TxFifo           txfifo;                 /* transmit fifo -- size will be maxTxCredits */
113         struct urb              *write_urb;             /* write URB for this port */
114         bool                    write_in_progress;      /* 'true' while a write URB is outstanding */
115         spinlock_t              ep_lock;
116
117         __u8                    shadowLCR;              /* last LCR value received */
118         __u8                    shadowMCR;              /* last MCR value received */
119         __u8                    shadowMSR;              /* last MSR value received */
120         __u8                    shadowLSR;              /* last LSR value received */
121         __u8                    shadowXonChar;          /* last value set as XON char in Edgeport */
122         __u8                    shadowXoffChar;         /* last value set as XOFF char in Edgeport */
123         __u8                    validDataMask;
124         __u32                   baudRate;
125
126         bool                    open;
127         bool                    openPending;
128         bool                    commandPending;
129         bool                    closePending;
130         bool                    chaseResponsePending;
131
132         wait_queue_head_t       wait_chase;             /* for handling sleeping while waiting for chase to finish */
133         wait_queue_head_t       wait_open;              /* for handling sleeping while waiting for open to finish */
134         wait_queue_head_t       wait_command;           /* for handling sleeping while waiting for command to finish */
135         wait_queue_head_t       delta_msr_wait;         /* for handling sleeping while waiting for msr change to happen */
136
137         struct async_icount     icount;
138         struct usb_serial_port  *port;                  /* loop back to the owner of this object */
139 };
140
141
142 /* This structure holds all of the individual device information */
143 struct edgeport_serial {
144         char                    name[MAX_NAME_LEN+2];           /* string name of this device */
145
146         struct edge_manuf_descriptor    manuf_descriptor;       /* the manufacturer descriptor */
147         struct edge_boot_descriptor     boot_descriptor;        /* the boot firmware descriptor */
148         struct edgeport_product_info    product_info;           /* Product Info */
149         struct edge_compatibility_descriptor epic_descriptor;   /* Edgeport compatible descriptor */
150         int                     is_epic;                        /* flag if EPiC device or not */
151
152         __u8                    interrupt_in_endpoint;          /* the interrupt endpoint handle */
153         unsigned char *         interrupt_in_buffer;            /* the buffer we use for the interrupt endpoint */
154         struct urb *            interrupt_read_urb;             /* our interrupt urb */
155
156         __u8                    bulk_in_endpoint;               /* the bulk in endpoint handle */
157         unsigned char *         bulk_in_buffer;                 /* the buffer we use for the bulk in endpoint */
158         struct urb *            read_urb;                       /* our bulk read urb */
159         bool                    read_in_progress;
160         spinlock_t              es_lock;
161
162         __u8                    bulk_out_endpoint;              /* the bulk out endpoint handle */
163
164         __s16                   rxBytesAvail;                   /* the number of bytes that we need to read from this device */
165
166         enum RXSTATE            rxState;                        /* the current state of the bulk receive processor */
167         __u8                    rxHeader1;                      /* receive header byte 1 */
168         __u8                    rxHeader2;                      /* receive header byte 2 */
169         __u8                    rxHeader3;                      /* receive header byte 3 */
170         __u8                    rxPort;                         /* the port that we are currently receiving data for */
171         __u8                    rxStatusCode;                   /* the receive status code */
172         __u8                    rxStatusParam;                  /* the receive status paramater */
173         __s16                   rxBytesRemaining;               /* the number of port bytes left to read */
174         struct usb_serial       *serial;                        /* loop back to the owner of this object */
175 };
176
177 /* baud rate information */
178 struct divisor_table_entry {
179         __u32   BaudRate;
180         __u16  Divisor;
181 };
182
183 //
184 // Define table of divisors for Rev A EdgePort/4 hardware
185 // These assume a 3.6864MHz crystal, the standard /16, and
186 // MCR.7 = 0.
187 //
188 static const struct divisor_table_entry divisor_table[] = {
189         {   50,         4608},  
190         {   75,         3072},  
191         {   110,        2095},          /* 2094.545455 => 230450   => .0217 % over */
192         {   134,        1713},          /* 1713.011152 => 230398.5 => .00065% under */
193         {   150,        1536},
194         {   300,        768},
195         {   600,        384},
196         {   1200,       192},
197         {   1800,       128},
198         {   2400,       96},
199         {   4800,       48},
200         {   7200,       32},
201         {   9600,       24},
202         {   14400,      16},
203         {   19200,      12},
204         {   38400,      6},
205         {   57600,      4},
206         {   115200,     2},
207         {   230400,     1},
208 };
209
210 /* local variables */
211 static int debug;
212
213 static int low_latency = 1;     /* tty low latency flag, on by default */
214
215 static atomic_t CmdUrbs;                /* Number of outstanding Command Write Urbs */
216
217
218 /* local function prototypes */
219
220 /* function prototypes for all URB callbacks */
221 static void edge_interrupt_callback     (struct urb *urb);
222 static void edge_bulk_in_callback       (struct urb *urb);
223 static void edge_bulk_out_data_callback (struct urb *urb);
224 static void edge_bulk_out_cmd_callback  (struct urb *urb);
225
226 /* function prototypes for the usbserial callbacks */
227 static int  edge_open                   (struct usb_serial_port *port, struct file *filp);
228 static void edge_close                  (struct usb_serial_port *port, struct file *filp);
229 static int  edge_write                  (struct usb_serial_port *port, const unsigned char *buf, int count);
230 static int  edge_write_room             (struct usb_serial_port *port);
231 static int  edge_chars_in_buffer        (struct usb_serial_port *port);
232 static void edge_throttle               (struct usb_serial_port *port);
233 static void edge_unthrottle             (struct usb_serial_port *port);
234 static void edge_set_termios            (struct usb_serial_port *port, struct ktermios *old_termios);
235 static int  edge_ioctl                  (struct usb_serial_port *port, struct file *file, unsigned int cmd, unsigned long arg);
236 static void edge_break                  (struct usb_serial_port *port, int break_state);
237 static int  edge_tiocmget               (struct usb_serial_port *port, struct file *file);
238 static int  edge_tiocmset               (struct usb_serial_port *port, struct file *file, unsigned int set, unsigned int clear);
239 static int  edge_startup                (struct usb_serial *serial);
240 static void edge_shutdown               (struct usb_serial *serial);
241
242
243 #include "io_tables.h"  /* all of the devices that this driver supports */
244
245 /* function prototypes for all of our local functions */
246 static void  process_rcvd_data          (struct edgeport_serial *edge_serial, unsigned char *buffer, __u16 bufferLength);
247 static void process_rcvd_status         (struct edgeport_serial *edge_serial, __u8 byte2, __u8 byte3);
248 static void edge_tty_recv                       (struct device *dev, struct tty_struct *tty, unsigned char *data, int length);
249 static void handle_new_msr              (struct edgeport_port *edge_port, __u8 newMsr);
250 static void handle_new_lsr              (struct edgeport_port *edge_port, __u8 lsrData, __u8 lsr, __u8 data);
251 static int  send_iosp_ext_cmd           (struct edgeport_port *edge_port, __u8 command, __u8 param);
252 static int  calc_baud_rate_divisor      (int baud_rate, int *divisor);
253 static int  send_cmd_write_baud_rate    (struct edgeport_port *edge_port, int baudRate);
254 static void change_port_settings        (struct edgeport_port *edge_port, struct ktermios *old_termios);
255 static int  send_cmd_write_uart_register        (struct edgeport_port *edge_port, __u8 regNum, __u8 regValue);
256 static int  write_cmd_usb               (struct edgeport_port *edge_port, unsigned char *buffer, int writeLength);
257 static void send_more_port_data         (struct edgeport_serial *edge_serial, struct edgeport_port *edge_port);
258
259 static int  sram_write                  (struct usb_serial *serial, __u16 extAddr, __u16 addr, __u16 length, __u8 *data);
260 static int  rom_read                    (struct usb_serial *serial, __u16 extAddr, __u16 addr, __u16 length, __u8 *data);
261 static int  rom_write                   (struct usb_serial *serial, __u16 extAddr, __u16 addr, __u16 length, __u8 *data);
262 static void get_manufacturing_desc      (struct edgeport_serial *edge_serial);
263 static void get_boot_desc               (struct edgeport_serial *edge_serial);
264 static void load_application_firmware   (struct edgeport_serial *edge_serial);
265
266 static void unicode_to_ascii(char *string, int buflen, __le16 *unicode, int unicode_size);
267
268
269 // ************************************************************************
270 // ************************************************************************
271 // ************************************************************************
272 // ************************************************************************
273
274 /************************************************************************
275  *                                                                      *
276  * update_edgeport_E2PROM()     Compare current versions of             *
277  *                              Boot ROM and Manufacture                *
278  *                              Descriptors with versions               *
279  *                              embedded in this driver                 *
280  *                                                                      *
281  ************************************************************************/
282 static void update_edgeport_E2PROM (struct edgeport_serial *edge_serial)
283 {
284         __u32 BootCurVer;
285         __u32 BootNewVer;
286         __u8 BootMajorVersion;                  
287         __u8 BootMinorVersion;                  
288         __le16 BootBuildNumber;
289         __u8 *BootImage;      
290         __u32 BootSize;
291         struct edge_firmware_image_record *record;
292         unsigned char *firmware;
293         int response;
294
295
296         switch (edge_serial->product_info.iDownloadFile) {
297                 case EDGE_DOWNLOAD_FILE_I930:
298                         BootMajorVersion        = BootCodeImageVersion_GEN1.MajorVersion;
299                         BootMinorVersion        = BootCodeImageVersion_GEN1.MinorVersion;
300                         BootBuildNumber         = cpu_to_le16(BootCodeImageVersion_GEN1.BuildNumber);
301                         BootImage               = &BootCodeImage_GEN1[0];
302                         BootSize                = sizeof( BootCodeImage_GEN1 );
303                         break;
304
305                 case EDGE_DOWNLOAD_FILE_80251:
306                         BootMajorVersion        = BootCodeImageVersion_GEN2.MajorVersion;
307                         BootMinorVersion        = BootCodeImageVersion_GEN2.MinorVersion;
308                         BootBuildNumber         = cpu_to_le16(BootCodeImageVersion_GEN2.BuildNumber);
309                         BootImage               = &BootCodeImage_GEN2[0];
310                         BootSize                = sizeof( BootCodeImage_GEN2 );
311                         break;
312
313                 default:
314                         return;
315         }
316
317         // Check Boot Image Version
318         BootCurVer = (edge_serial->boot_descriptor.MajorVersion << 24) +
319                      (edge_serial->boot_descriptor.MinorVersion << 16) +
320                       le16_to_cpu(edge_serial->boot_descriptor.BuildNumber);
321
322         BootNewVer = (BootMajorVersion << 24) +
323                      (BootMinorVersion << 16) +
324                       le16_to_cpu(BootBuildNumber);
325
326         dbg("Current Boot Image version %d.%d.%d",
327             edge_serial->boot_descriptor.MajorVersion,
328             edge_serial->boot_descriptor.MinorVersion,
329             le16_to_cpu(edge_serial->boot_descriptor.BuildNumber));
330
331
332         if (BootNewVer > BootCurVer) {
333                 dbg("**Update Boot Image from %d.%d.%d to %d.%d.%d",
334                     edge_serial->boot_descriptor.MajorVersion,
335                     edge_serial->boot_descriptor.MinorVersion,
336                     le16_to_cpu(edge_serial->boot_descriptor.BuildNumber),
337                     BootMajorVersion,
338                     BootMinorVersion,
339                     le16_to_cpu(BootBuildNumber));
340
341
342                 dbg("Downloading new Boot Image");
343
344                 firmware = BootImage;
345
346                 for (;;) {
347                         record = (struct edge_firmware_image_record *)firmware;
348                         response = rom_write (edge_serial->serial, le16_to_cpu(record->ExtAddr), le16_to_cpu(record->Addr), le16_to_cpu(record->Len), &record->Data[0]);
349                         if (response < 0) {
350                                 dev_err(&edge_serial->serial->dev->dev, "rom_write failed (%x, %x, %d)\n", le16_to_cpu(record->ExtAddr), le16_to_cpu(record->Addr), le16_to_cpu(record->Len));
351                                 break;
352                         }
353                         firmware += sizeof (struct edge_firmware_image_record) + le16_to_cpu(record->Len);
354                         if (firmware >= &BootImage[BootSize]) {
355                                 break;
356                         }
357                 }
358         } else {
359                 dbg("Boot Image -- already up to date");
360         }
361 }
362
363
364 /************************************************************************
365  *                                                                      *
366  *  Get string descriptor from device                                   *
367  *                                                                      *
368  ************************************************************************/
369 static int get_string (struct usb_device *dev, int Id, char *string, int buflen)
370 {
371         struct usb_string_descriptor StringDesc;
372         struct usb_string_descriptor *pStringDesc;
373
374         dbg("%s - USB String ID = %d", __FUNCTION__, Id );
375
376         if (!usb_get_descriptor(dev, USB_DT_STRING, Id, &StringDesc, sizeof(StringDesc))) {
377                 return 0;
378         }
379
380         pStringDesc = kmalloc (StringDesc.bLength, GFP_KERNEL);
381
382         if (!pStringDesc) {
383                 return 0;
384         }
385
386         if (!usb_get_descriptor(dev, USB_DT_STRING, Id, pStringDesc, StringDesc.bLength )) {
387                 kfree(pStringDesc);
388                 return 0;
389         }
390
391         unicode_to_ascii(string, buflen, pStringDesc->wData, pStringDesc->bLength/2);
392
393         kfree(pStringDesc);
394         dbg("%s - USB String %s", __FUNCTION__, string);
395         return strlen(string);
396 }
397
398
399 #if 0
400 /************************************************************************
401  *
402  *  Get string descriptor from device
403  *
404  ************************************************************************/
405 static int get_string_desc (struct usb_device *dev, int Id, struct usb_string_descriptor **pRetDesc)
406 {
407         struct usb_string_descriptor StringDesc;
408         struct usb_string_descriptor *pStringDesc;
409
410         dbg("%s - USB String ID = %d", __FUNCTION__, Id );
411
412         if (!usb_get_descriptor(dev, USB_DT_STRING, Id, &StringDesc, sizeof(StringDesc))) {
413                 return 0;
414         }
415
416         pStringDesc = kmalloc (StringDesc.bLength, GFP_KERNEL);
417
418         if (!pStringDesc) {
419                 return -1;
420         }
421
422         if (!usb_get_descriptor(dev, USB_DT_STRING, Id, pStringDesc, StringDesc.bLength )) {
423                 kfree(pStringDesc);
424                 return -1;
425         }
426
427         *pRetDesc = pStringDesc;
428         return 0;
429 }
430 #endif
431
432 static void dump_product_info(struct edgeport_product_info *product_info)
433 {
434         // Dump Product Info structure
435         dbg("**Product Information:");
436         dbg("  ProductId             %x", product_info->ProductId );
437         dbg("  NumPorts              %d", product_info->NumPorts );
438         dbg("  ProdInfoVer           %d", product_info->ProdInfoVer );
439         dbg("  IsServer              %d", product_info->IsServer);
440         dbg("  IsRS232               %d", product_info->IsRS232 );
441         dbg("  IsRS422               %d", product_info->IsRS422 );
442         dbg("  IsRS485               %d", product_info->IsRS485 );
443         dbg("  RomSize               %d", product_info->RomSize );
444         dbg("  RamSize               %d", product_info->RamSize );
445         dbg("  CpuRev                %x", product_info->CpuRev  );
446         dbg("  BoardRev              %x", product_info->BoardRev);
447         dbg("  BootMajorVersion      %d.%d.%d", product_info->BootMajorVersion,
448             product_info->BootMinorVersion,
449             le16_to_cpu(product_info->BootBuildNumber));
450         dbg("  FirmwareMajorVersion  %d.%d.%d", product_info->FirmwareMajorVersion,
451             product_info->FirmwareMinorVersion,
452             le16_to_cpu(product_info->FirmwareBuildNumber));
453         dbg("  ManufactureDescDate   %d/%d/%d", product_info->ManufactureDescDate[0],
454             product_info->ManufactureDescDate[1],
455             product_info->ManufactureDescDate[2]+1900);
456         dbg("  iDownloadFile         0x%x", product_info->iDownloadFile);
457         dbg("  EpicVer               %d", product_info->EpicVer);
458 }
459
460 static void get_product_info(struct edgeport_serial *edge_serial)
461 {
462         struct edgeport_product_info *product_info = &edge_serial->product_info;
463
464         memset (product_info, 0, sizeof(struct edgeport_product_info));
465
466         product_info->ProductId         = (__u16)(le16_to_cpu(edge_serial->serial->dev->descriptor.idProduct) & ~ION_DEVICE_ID_80251_NETCHIP);
467         product_info->NumPorts          = edge_serial->manuf_descriptor.NumPorts;
468         product_info->ProdInfoVer       = 0;
469
470         product_info->RomSize           = edge_serial->manuf_descriptor.RomSize;
471         product_info->RamSize           = edge_serial->manuf_descriptor.RamSize;
472         product_info->CpuRev            = edge_serial->manuf_descriptor.CpuRev;
473         product_info->BoardRev          = edge_serial->manuf_descriptor.BoardRev;
474
475         product_info->BootMajorVersion  = edge_serial->boot_descriptor.MajorVersion;
476         product_info->BootMinorVersion  = edge_serial->boot_descriptor.MinorVersion;
477         product_info->BootBuildNumber   = edge_serial->boot_descriptor.BuildNumber;
478
479         memcpy(product_info->ManufactureDescDate, edge_serial->manuf_descriptor.DescDate, sizeof(edge_serial->manuf_descriptor.DescDate));
480
481         // check if this is 2nd generation hardware
482         if (le16_to_cpu(edge_serial->serial->dev->descriptor.idProduct) & ION_DEVICE_ID_80251_NETCHIP) {
483                 product_info->FirmwareMajorVersion      = OperationalCodeImageVersion_GEN2.MajorVersion;
484                 product_info->FirmwareMinorVersion      = OperationalCodeImageVersion_GEN2.MinorVersion;
485                 product_info->FirmwareBuildNumber       = cpu_to_le16(OperationalCodeImageVersion_GEN2.BuildNumber);
486                 product_info->iDownloadFile             = EDGE_DOWNLOAD_FILE_80251;
487         } else {
488                 product_info->FirmwareMajorVersion      = OperationalCodeImageVersion_GEN1.MajorVersion;
489                 product_info->FirmwareMinorVersion      = OperationalCodeImageVersion_GEN1.MinorVersion;
490                 product_info->FirmwareBuildNumber       = cpu_to_le16(OperationalCodeImageVersion_GEN1.BuildNumber);
491                 product_info->iDownloadFile             = EDGE_DOWNLOAD_FILE_I930;
492         }
493
494         // Determine Product type and set appropriate flags
495         switch (DEVICE_ID_FROM_USB_PRODUCT_ID(product_info->ProductId)) {
496                 case ION_DEVICE_ID_EDGEPORT_COMPATIBLE:
497                 case ION_DEVICE_ID_EDGEPORT_4T:
498                 case ION_DEVICE_ID_EDGEPORT_4:
499                 case ION_DEVICE_ID_EDGEPORT_2:
500                 case ION_DEVICE_ID_EDGEPORT_8_DUAL_CPU:
501                 case ION_DEVICE_ID_EDGEPORT_8:
502                 case ION_DEVICE_ID_EDGEPORT_421:
503                 case ION_DEVICE_ID_EDGEPORT_21:
504                 case ION_DEVICE_ID_EDGEPORT_2_DIN:
505                 case ION_DEVICE_ID_EDGEPORT_4_DIN:
506                 case ION_DEVICE_ID_EDGEPORT_16_DUAL_CPU:
507                         product_info->IsRS232 = 1;
508                         break;
509
510                 case ION_DEVICE_ID_EDGEPORT_2I:                            // Edgeport/2 RS422/RS485
511                         product_info->IsRS422 = 1;
512                         product_info->IsRS485 = 1;
513                         break;
514
515                 case ION_DEVICE_ID_EDGEPORT_8I:                            // Edgeport/4 RS422
516                 case ION_DEVICE_ID_EDGEPORT_4I:                            // Edgeport/4 RS422
517                         product_info->IsRS422 = 1;
518                         break;
519         }
520
521         dump_product_info(product_info);
522 }
523
524 static int get_epic_descriptor(struct edgeport_serial *ep)
525 {
526         int result;
527         struct usb_serial *serial = ep->serial;
528         struct edgeport_product_info *product_info = &ep->product_info;
529         struct edge_compatibility_descriptor *epic = &ep->epic_descriptor;
530         struct edge_compatibility_bits *bits;
531
532         ep->is_epic = 0;
533         result = usb_control_msg(serial->dev, usb_rcvctrlpipe(serial->dev, 0),
534                                  USB_REQUEST_ION_GET_EPIC_DESC,
535                                  0xC0, 0x00, 0x00,
536                                  &ep->epic_descriptor,
537                                  sizeof(struct edge_compatibility_descriptor),
538                                  300);
539
540         dbg("%s result = %d", __FUNCTION__, result);
541
542         if (result > 0) {
543                 ep->is_epic = 1;
544                 memset(product_info, 0, sizeof(struct edgeport_product_info));
545
546                 product_info->NumPorts                  = epic->NumPorts;
547                 product_info->ProdInfoVer               = 0;
548                 product_info->FirmwareMajorVersion      = epic->MajorVersion;
549                 product_info->FirmwareMinorVersion      = epic->MinorVersion;
550                 product_info->FirmwareBuildNumber       = epic->BuildNumber;
551                 product_info->iDownloadFile             = epic->iDownloadFile;
552                 product_info->EpicVer                   = epic->EpicVer;
553                 product_info->Epic                      = epic->Supports;
554                 product_info->ProductId                 = ION_DEVICE_ID_EDGEPORT_COMPATIBLE;
555                 dump_product_info(product_info);
556
557                 bits = &ep->epic_descriptor.Supports;
558                 dbg("**EPIC descriptor:");
559                 dbg("  VendEnableSuspend: %s", bits->VendEnableSuspend  ? "TRUE": "FALSE");
560                 dbg("  IOSPOpen         : %s", bits->IOSPOpen           ? "TRUE": "FALSE" );
561                 dbg("  IOSPClose        : %s", bits->IOSPClose          ? "TRUE": "FALSE" );
562                 dbg("  IOSPChase        : %s", bits->IOSPChase          ? "TRUE": "FALSE" );
563                 dbg("  IOSPSetRxFlow    : %s", bits->IOSPSetRxFlow      ? "TRUE": "FALSE" );
564                 dbg("  IOSPSetTxFlow    : %s", bits->IOSPSetTxFlow      ? "TRUE": "FALSE" );
565                 dbg("  IOSPSetXChar     : %s", bits->IOSPSetXChar       ? "TRUE": "FALSE" );
566                 dbg("  IOSPRxCheck      : %s", bits->IOSPRxCheck        ? "TRUE": "FALSE" );
567                 dbg("  IOSPSetClrBreak  : %s", bits->IOSPSetClrBreak    ? "TRUE": "FALSE" );
568                 dbg("  IOSPWriteMCR     : %s", bits->IOSPWriteMCR       ? "TRUE": "FALSE" );
569                 dbg("  IOSPWriteLCR     : %s", bits->IOSPWriteLCR       ? "TRUE": "FALSE" );
570                 dbg("  IOSPSetBaudRate  : %s", bits->IOSPSetBaudRate    ? "TRUE": "FALSE" );
571                 dbg("  TrueEdgeport     : %s", bits->TrueEdgeport       ? "TRUE": "FALSE" );
572         }
573
574         return result;
575 }
576
577
578 /************************************************************************/
579 /************************************************************************/
580 /*            U S B  C A L L B A C K   F U N C T I O N S                */
581 /*            U S B  C A L L B A C K   F U N C T I O N S                */
582 /************************************************************************/
583 /************************************************************************/
584
585 /*****************************************************************************
586  * edge_interrupt_callback
587  *      this is the callback function for when we have received data on the 
588  *      interrupt endpoint.
589  *****************************************************************************/
590 static void edge_interrupt_callback (struct urb *urb)
591 {
592         struct edgeport_serial  *edge_serial = (struct edgeport_serial *)urb->context;
593         struct edgeport_port *edge_port;
594         struct usb_serial_port *port;
595         unsigned char *data = urb->transfer_buffer;
596         int length = urb->actual_length;
597         int bytes_avail;
598         int position;
599         int txCredits;
600         int portNumber;
601         int result;
602         int status = urb->status;
603
604         dbg("%s", __FUNCTION__);
605
606         switch (status) {
607         case 0:
608                 /* success */
609                 break;
610         case -ECONNRESET:
611         case -ENOENT:
612         case -ESHUTDOWN:
613                 /* this urb is terminated, clean up */
614                 dbg("%s - urb shutting down with status: %d",
615                     __FUNCTION__, status);
616                 return;
617         default:
618                 dbg("%s - nonzero urb status received: %d",
619                     __FUNCTION__, status);
620                 goto exit;
621         }
622
623         // process this interrupt-read even if there are no ports open
624         if (length) {
625                 usb_serial_debug_data(debug, &edge_serial->serial->dev->dev, __FUNCTION__, length, data);
626
627                 if (length > 1) {
628                         bytes_avail = data[0] | (data[1] << 8);
629                         if (bytes_avail) {
630                                 spin_lock(&edge_serial->es_lock);
631                                 edge_serial->rxBytesAvail += bytes_avail;
632                                 dbg("%s - bytes_avail=%d, rxBytesAvail=%d, read_in_progress=%d", __FUNCTION__, bytes_avail, edge_serial->rxBytesAvail, edge_serial->read_in_progress);
633
634                                 if (edge_serial->rxBytesAvail > 0 &&
635                                     !edge_serial->read_in_progress) {
636                                         dbg("%s - posting a read", __FUNCTION__);
637                                         edge_serial->read_in_progress = true;
638
639                                         /* we have pending bytes on the bulk in pipe, send a request */
640                                         edge_serial->read_urb->dev = edge_serial->serial->dev;
641                                         result = usb_submit_urb(edge_serial->read_urb, GFP_ATOMIC);
642                                         if (result) {
643                                                 dev_err(&edge_serial->serial->dev->dev, "%s - usb_submit_urb(read bulk) failed with result = %d\n", __FUNCTION__, result);
644                                                 edge_serial->read_in_progress = false;
645                                         }
646                                 }
647                                 spin_unlock(&edge_serial->es_lock);
648                         }
649                 }
650                 /* grab the txcredits for the ports if available */
651                 position = 2;
652                 portNumber = 0;
653                 while ((position < length) && (portNumber < edge_serial->serial->num_ports)) {
654                         txCredits = data[position] | (data[position+1] << 8);
655                         if (txCredits) {
656                                 port = edge_serial->serial->port[portNumber];
657                                 edge_port = usb_get_serial_port_data(port);
658                                 if (edge_port->open) {
659                                         spin_lock(&edge_port->ep_lock);
660                                         edge_port->txCredits += txCredits;
661                                         spin_unlock(&edge_port->ep_lock);
662                                         dbg("%s - txcredits for port%d = %d", __FUNCTION__, portNumber, edge_port->txCredits);
663
664                                         /* tell the tty driver that something has changed */
665                                         if (edge_port->port->tty)
666                                                 tty_wakeup(edge_port->port->tty);
667
668                                         // Since we have more credit, check if more data can be sent
669                                         send_more_port_data(edge_serial, edge_port);
670                                 }
671                         }
672                         position += 2;
673                         ++portNumber;
674                 }
675         }
676
677 exit:
678         result = usb_submit_urb (urb, GFP_ATOMIC);
679         if (result) {
680                 dev_err(&urb->dev->dev, "%s - Error %d submitting control urb\n", __FUNCTION__, result);
681         }
682 }
683
684
685 /*****************************************************************************
686  * edge_bulk_in_callback
687  *      this is the callback function for when we have received data on the 
688  *      bulk in endpoint.
689  *****************************************************************************/
690 static void edge_bulk_in_callback (struct urb *urb)
691 {
692         struct edgeport_serial  *edge_serial = (struct edgeport_serial *)urb->context;
693         unsigned char           *data = urb->transfer_buffer;
694         int                     retval;
695         __u16                   raw_data_length;
696         int status = urb->status;
697
698         dbg("%s", __FUNCTION__);
699
700         if (status) {
701                 dbg("%s - nonzero read bulk status received: %d",
702                     __FUNCTION__, status);
703                 edge_serial->read_in_progress = false;
704                 return;
705         }
706
707         if (urb->actual_length == 0) {
708                 dbg("%s - read bulk callback with no data", __FUNCTION__);
709                 edge_serial->read_in_progress = false;
710                 return;
711         }
712
713         raw_data_length = urb->actual_length;
714
715         usb_serial_debug_data(debug, &edge_serial->serial->dev->dev, __FUNCTION__, raw_data_length, data);
716
717         spin_lock(&edge_serial->es_lock);
718
719         /* decrement our rxBytes available by the number that we just got */
720         edge_serial->rxBytesAvail -= raw_data_length;
721
722         dbg("%s - Received = %d, rxBytesAvail %d", __FUNCTION__, raw_data_length, edge_serial->rxBytesAvail);
723
724         process_rcvd_data (edge_serial, data, urb->actual_length);
725
726         /* check to see if there's any more data for us to read */
727         if (edge_serial->rxBytesAvail > 0) {
728                 dbg("%s - posting a read", __FUNCTION__);
729                 edge_serial->read_urb->dev = edge_serial->serial->dev;
730                 retval = usb_submit_urb(edge_serial->read_urb, GFP_ATOMIC);
731                 if (retval) {
732                         dev_err(&urb->dev->dev,
733                                 "%s - usb_submit_urb(read bulk) failed, "
734                                 "retval = %d\n", __FUNCTION__, retval);
735                         edge_serial->read_in_progress = false;
736                 }
737         } else {
738                 edge_serial->read_in_progress = false;
739         }
740
741         spin_unlock(&edge_serial->es_lock);
742 }
743
744
745 /*****************************************************************************
746  * edge_bulk_out_data_callback
747  *      this is the callback function for when we have finished sending serial data
748  *      on the bulk out endpoint.
749  *****************************************************************************/
750 static void edge_bulk_out_data_callback (struct urb *urb)
751 {
752         struct edgeport_port *edge_port = (struct edgeport_port *)urb->context;
753         struct tty_struct *tty;
754         int status = urb->status;
755
756         dbg("%s", __FUNCTION__);
757
758         if (status) {
759                 dbg("%s - nonzero write bulk status received: %d",
760                     __FUNCTION__, status);
761         }
762
763         tty = edge_port->port->tty;
764
765         if (tty && edge_port->open) {
766                 /* let the tty driver wakeup if it has a special write_wakeup function */
767                 tty_wakeup(tty);
768         }
769
770         // Release the Write URB
771         edge_port->write_in_progress = false;
772
773         // Check if more data needs to be sent
774         send_more_port_data((struct edgeport_serial *)(usb_get_serial_data(edge_port->port->serial)), edge_port);
775 }
776
777
778 /*****************************************************************************
779  * BulkOutCmdCallback
780  *      this is the callback function for when we have finished sending a command
781  *      on the bulk out endpoint.
782  *****************************************************************************/
783 static void edge_bulk_out_cmd_callback (struct urb *urb)
784 {
785         struct edgeport_port *edge_port = (struct edgeport_port *)urb->context;
786         struct tty_struct *tty;
787         int status = urb->status;
788
789         dbg("%s", __FUNCTION__);
790
791         atomic_dec(&CmdUrbs);
792         dbg("%s - FREE URB %p (outstanding %d)", __FUNCTION__, urb, atomic_read(&CmdUrbs));
793
794
795         /* clean up the transfer buffer */
796         kfree(urb->transfer_buffer);
797
798         /* Free the command urb */
799         usb_free_urb (urb);
800
801         if (status) {
802                 dbg("%s - nonzero write bulk status received: %d", __FUNCTION__, status);
803                 return;
804         }
805
806         /* Get pointer to tty */
807         tty = edge_port->port->tty;
808
809         /* tell the tty driver that something has changed */
810         if (tty && edge_port->open)
811                 tty_wakeup(tty);
812
813         /* we have completed the command */
814         edge_port->commandPending = false;
815         wake_up(&edge_port->wait_command);
816 }
817
818
819 /*****************************************************************************
820  * Driver tty interface functions
821  *****************************************************************************/
822
823 /*****************************************************************************
824  * SerialOpen
825  *      this function is called by the tty driver when a port is opened
826  *      If successful, we return 0
827  *      Otherwise we return a negative error number.
828  *****************************************************************************/
829 static int edge_open (struct usb_serial_port *port, struct file * filp)
830 {
831         struct edgeport_port *edge_port = usb_get_serial_port_data(port);
832         struct usb_serial *serial;
833         struct edgeport_serial *edge_serial;
834         int response;
835
836         dbg("%s - port %d", __FUNCTION__, port->number);
837
838         if (edge_port == NULL)
839                 return -ENODEV;
840
841         if (port->tty)
842                 port->tty->low_latency = low_latency;
843
844         /* see if we've set up our endpoint info yet (can't set it up in edge_startup
845            as the structures were not set up at that time.) */
846         serial = port->serial;
847         edge_serial = usb_get_serial_data(serial);
848         if (edge_serial == NULL) {
849                 return -ENODEV;
850         }
851         if (edge_serial->interrupt_in_buffer == NULL) {
852                 struct usb_serial_port *port0 = serial->port[0];
853                 
854                 /* not set up yet, so do it now */
855                 edge_serial->interrupt_in_buffer = port0->interrupt_in_buffer;
856                 edge_serial->interrupt_in_endpoint = port0->interrupt_in_endpointAddress;
857                 edge_serial->interrupt_read_urb = port0->interrupt_in_urb;
858                 edge_serial->bulk_in_buffer = port0->bulk_in_buffer;
859                 edge_serial->bulk_in_endpoint = port0->bulk_in_endpointAddress;
860                 edge_serial->read_urb = port0->read_urb;
861                 edge_serial->bulk_out_endpoint = port0->bulk_out_endpointAddress;
862         
863                 /* set up our interrupt urb */
864                 usb_fill_int_urb(edge_serial->interrupt_read_urb,
865                                  serial->dev,
866                                  usb_rcvintpipe(serial->dev,
867                                                 port0->interrupt_in_endpointAddress),
868                                  port0->interrupt_in_buffer,
869                                  edge_serial->interrupt_read_urb->transfer_buffer_length,
870                                  edge_interrupt_callback, edge_serial,
871                                  edge_serial->interrupt_read_urb->interval);
872                 
873                 /* set up our bulk in urb */
874                 usb_fill_bulk_urb(edge_serial->read_urb, serial->dev,
875                                   usb_rcvbulkpipe(serial->dev,
876                                                   port0->bulk_in_endpointAddress),
877                                   port0->bulk_in_buffer,
878                                   edge_serial->read_urb->transfer_buffer_length,
879                                   edge_bulk_in_callback, edge_serial);
880                 edge_serial->read_in_progress = false;
881
882                 /* start interrupt read for this edgeport
883                  * this interrupt will continue as long as the edgeport is connected */
884                 response = usb_submit_urb (edge_serial->interrupt_read_urb, GFP_KERNEL);
885                 if (response) {
886                         dev_err(&port->dev, "%s - Error %d submitting control urb\n", __FUNCTION__, response);
887                 }
888         }
889         
890         /* initialize our wait queues */
891         init_waitqueue_head(&edge_port->wait_open);
892         init_waitqueue_head(&edge_port->wait_chase);
893         init_waitqueue_head(&edge_port->delta_msr_wait);
894         init_waitqueue_head(&edge_port->wait_command);
895
896         /* initialize our icount structure */
897         memset (&(edge_port->icount), 0x00, sizeof(edge_port->icount));
898
899         /* initialize our port settings */
900         edge_port->txCredits            = 0;                    /* Can't send any data yet */
901         edge_port->shadowMCR            = MCR_MASTER_IE;        /* Must always set this bit to enable ints! */
902         edge_port->chaseResponsePending = false;
903
904         /* send a open port command */
905         edge_port->openPending = true;
906         edge_port->open        = false;
907         response = send_iosp_ext_cmd (edge_port, IOSP_CMD_OPEN_PORT, 0);
908
909         if (response < 0) {
910                 dev_err(&port->dev, "%s - error sending open port command\n", __FUNCTION__);
911                 edge_port->openPending = false;
912                 return -ENODEV;
913         }
914
915         /* now wait for the port to be completely opened */
916         wait_event_timeout(edge_port->wait_open, !edge_port->openPending, OPEN_TIMEOUT);
917
918         if (!edge_port->open) {
919                 /* open timed out */
920                 dbg("%s - open timedout", __FUNCTION__);
921                 edge_port->openPending = false;
922                 return -ENODEV;
923         }
924
925         /* create the txfifo */
926         edge_port->txfifo.head  = 0;
927         edge_port->txfifo.tail  = 0;
928         edge_port->txfifo.count = 0;
929         edge_port->txfifo.size  = edge_port->maxTxCredits;
930         edge_port->txfifo.fifo  = kmalloc (edge_port->maxTxCredits, GFP_KERNEL);
931
932         if (!edge_port->txfifo.fifo) {
933                 dbg("%s - no memory", __FUNCTION__);
934                 edge_close (port, filp);
935                 return -ENOMEM;
936         }
937
938         /* Allocate a URB for the write */
939         edge_port->write_urb = usb_alloc_urb (0, GFP_KERNEL);
940         edge_port->write_in_progress = false;
941
942         if (!edge_port->write_urb) {
943                 dbg("%s - no memory", __FUNCTION__);
944                 edge_close (port, filp);
945                 return -ENOMEM;
946         }
947
948         dbg("%s(%d) - Initialize TX fifo to %d bytes", __FUNCTION__, port->number, edge_port->maxTxCredits);
949
950         dbg("%s exited", __FUNCTION__);
951
952         return 0;
953 }
954
955
956 /************************************************************************
957  *
958  * block_until_chase_response
959  *
960  *      This function will block the close until one of the following:
961  *              1. Response to our Chase comes from Edgeport
962  *              2. A timout of 10 seconds without activity has expired
963  *                 (1K of Edgeport data @ 2400 baud ==> 4 sec to empty)
964  *
965  ************************************************************************/
966 static void block_until_chase_response(struct edgeport_port *edge_port)
967 {
968         DEFINE_WAIT(wait);
969         __u16 lastCredits;
970         int timeout = 1*HZ;
971         int loop = 10;
972
973         while (1) {
974                 // Save Last credits
975                 lastCredits = edge_port->txCredits;
976
977                 // Did we get our Chase response
978                 if (!edge_port->chaseResponsePending) {
979                         dbg("%s - Got Chase Response", __FUNCTION__);
980
981                         // did we get all of our credit back?
982                         if (edge_port->txCredits == edge_port->maxTxCredits ) {
983                                 dbg("%s - Got all credits", __FUNCTION__);
984                                 return;
985                         }
986                 }
987
988                 // Block the thread for a while
989                 prepare_to_wait(&edge_port->wait_chase, &wait, TASK_UNINTERRUPTIBLE);
990                 schedule_timeout(timeout);
991                 finish_wait(&edge_port->wait_chase, &wait);
992
993                 if (lastCredits == edge_port->txCredits) {
994                         // No activity.. count down.
995                         loop--;
996                         if (loop == 0) {
997                                 edge_port->chaseResponsePending = false;
998                                 dbg("%s - Chase TIMEOUT", __FUNCTION__);
999                                 return;
1000                         }
1001                 } else {
1002                         // Reset timout value back to 10 seconds
1003                         dbg("%s - Last %d, Current %d", __FUNCTION__, lastCredits, edge_port->txCredits);
1004                         loop = 10;
1005                 }
1006         }
1007 }
1008
1009
1010 /************************************************************************
1011  *
1012  * block_until_tx_empty
1013  *
1014  *      This function will block the close until one of the following:
1015  *              1. TX count are 0
1016  *              2. The edgeport has stopped
1017  *              3. A timout of 3 seconds without activity has expired
1018  *
1019  ************************************************************************/
1020 static void block_until_tx_empty (struct edgeport_port *edge_port)
1021 {
1022         DEFINE_WAIT(wait);
1023         struct TxFifo *fifo = &edge_port->txfifo;
1024         __u32 lastCount;
1025         int timeout = HZ/10;
1026         int loop = 30;
1027
1028         while (1) {
1029                 // Save Last count
1030                 lastCount = fifo->count;
1031
1032                 // Is the Edgeport Buffer empty?
1033                 if (lastCount == 0) {
1034                         dbg("%s - TX Buffer Empty", __FUNCTION__);
1035                         return;
1036                 }
1037
1038                 // Block the thread for a while
1039                 prepare_to_wait (&edge_port->wait_chase, &wait, TASK_UNINTERRUPTIBLE);
1040                 schedule_timeout(timeout);
1041                 finish_wait(&edge_port->wait_chase, &wait);
1042
1043                 dbg("%s wait", __FUNCTION__);
1044
1045                 if (lastCount == fifo->count) {
1046                         // No activity.. count down.
1047                         loop--;
1048                         if (loop == 0) {
1049                                 dbg("%s - TIMEOUT", __FUNCTION__);
1050                                 return;
1051                         }
1052                 } else {
1053                         // Reset timout value back to seconds
1054                         loop = 30;
1055                 }
1056         }
1057 }
1058
1059
1060 /*****************************************************************************
1061  * edge_close
1062  *      this function is called by the tty driver when a port is closed
1063  *****************************************************************************/
1064 static void edge_close (struct usb_serial_port *port, struct file * filp)
1065 {
1066         struct edgeport_serial *edge_serial;
1067         struct edgeport_port *edge_port;
1068         int status;
1069
1070         dbg("%s - port %d", __FUNCTION__, port->number);
1071                          
1072         edge_serial = usb_get_serial_data(port->serial);
1073         edge_port = usb_get_serial_port_data(port);
1074         if ((edge_serial == NULL) || (edge_port == NULL))
1075                 return;
1076         
1077         // block until tx is empty
1078         block_until_tx_empty(edge_port);
1079
1080         edge_port->closePending = true;
1081
1082         if ((!edge_serial->is_epic) ||
1083             ((edge_serial->is_epic) &&
1084              (edge_serial->epic_descriptor.Supports.IOSPChase))) {
1085                 /* flush and chase */
1086                 edge_port->chaseResponsePending = true;
1087
1088                 dbg("%s - Sending IOSP_CMD_CHASE_PORT", __FUNCTION__);
1089                 status = send_iosp_ext_cmd (edge_port, IOSP_CMD_CHASE_PORT, 0);
1090                 if (status == 0) {
1091                         // block until chase finished
1092                         block_until_chase_response(edge_port);
1093                 } else {
1094                         edge_port->chaseResponsePending = false;
1095                 }
1096         }
1097
1098         if ((!edge_serial->is_epic) ||
1099             ((edge_serial->is_epic) &&
1100              (edge_serial->epic_descriptor.Supports.IOSPClose))) {
1101                /* close the port */
1102                 dbg("%s - Sending IOSP_CMD_CLOSE_PORT", __FUNCTION__);
1103                 send_iosp_ext_cmd (edge_port, IOSP_CMD_CLOSE_PORT, 0);
1104         }
1105
1106         //port->close = true;
1107         edge_port->closePending = false;
1108         edge_port->open = false;
1109         edge_port->openPending = false;
1110
1111         usb_kill_urb(edge_port->write_urb);
1112
1113         if (edge_port->write_urb) {
1114                 /* if this urb had a transfer buffer already (old transfer) free it */
1115                 kfree(edge_port->write_urb->transfer_buffer);
1116                 usb_free_urb(edge_port->write_urb);
1117                 edge_port->write_urb = NULL;
1118         }
1119         kfree(edge_port->txfifo.fifo);
1120         edge_port->txfifo.fifo = NULL;
1121
1122         dbg("%s exited", __FUNCTION__);
1123 }   
1124
1125 /*****************************************************************************
1126  * SerialWrite
1127  *      this function is called by the tty driver when data should be written to
1128  *      the port.
1129  *      If successful, we return the number of bytes written, otherwise we return
1130  *      a negative error number.
1131  *****************************************************************************/
1132 static int edge_write (struct usb_serial_port *port, const unsigned char *data, int count)
1133 {
1134         struct edgeport_port *edge_port = usb_get_serial_port_data(port);
1135         struct TxFifo *fifo;
1136         int copySize;
1137         int bytesleft;
1138         int firsthalf;
1139         int secondhalf;
1140         unsigned long flags;
1141
1142         dbg("%s - port %d", __FUNCTION__, port->number);
1143
1144         if (edge_port == NULL)
1145                 return -ENODEV;
1146
1147         // get a pointer to the Tx fifo
1148         fifo = &edge_port->txfifo;
1149
1150         spin_lock_irqsave(&edge_port->ep_lock, flags);
1151
1152         // calculate number of bytes to put in fifo
1153         copySize = min ((unsigned int)count, (edge_port->txCredits - fifo->count));
1154
1155         dbg("%s(%d) of %d byte(s) Fifo room  %d -- will copy %d bytes", __FUNCTION__, 
1156             port->number, count, edge_port->txCredits - fifo->count, copySize);
1157
1158         /* catch writes of 0 bytes which the tty driver likes to give us, and when txCredits is empty */
1159         if (copySize == 0) {
1160                 dbg("%s - copySize = Zero", __FUNCTION__);
1161                 goto finish_write;
1162         }
1163
1164         // queue the data       
1165         // since we can never overflow the buffer we do not have to check for full condition
1166
1167         // the copy is done is two parts -- first fill to the end of the buffer
1168         // then copy the reset from the start of the buffer 
1169
1170         bytesleft = fifo->size - fifo->head;
1171         firsthalf = min (bytesleft, copySize);
1172         dbg("%s - copy %d bytes of %d into fifo ", __FUNCTION__, firsthalf, bytesleft);
1173
1174         /* now copy our data */
1175         memcpy(&fifo->fifo[fifo->head], data, firsthalf);
1176         usb_serial_debug_data(debug, &port->dev, __FUNCTION__, firsthalf, &fifo->fifo[fifo->head]);
1177
1178         // update the index and size
1179         fifo->head  += firsthalf;
1180         fifo->count += firsthalf;
1181
1182         // wrap the index
1183         if (fifo->head == fifo->size) {
1184                 fifo->head = 0;
1185         }
1186
1187         secondhalf = copySize-firsthalf;
1188
1189         if (secondhalf) {
1190                 dbg("%s - copy rest of data %d", __FUNCTION__, secondhalf);
1191                 memcpy(&fifo->fifo[fifo->head], &data[firsthalf], secondhalf);
1192                 usb_serial_debug_data(debug, &port->dev, __FUNCTION__, secondhalf, &fifo->fifo[fifo->head]);
1193                 // update the index and size
1194                 fifo->count += secondhalf;
1195                 fifo->head  += secondhalf;
1196                 // No need to check for wrap since we can not get to end of fifo in this part
1197         }
1198
1199 finish_write:
1200         spin_unlock_irqrestore(&edge_port->ep_lock, flags);
1201
1202         send_more_port_data((struct edgeport_serial *)usb_get_serial_data(port->serial), edge_port);
1203
1204         dbg("%s wrote %d byte(s) TxCredits %d, Fifo %d", __FUNCTION__, copySize, edge_port->txCredits, fifo->count);
1205
1206         return copySize;   
1207 }
1208
1209
1210 /************************************************************************
1211  *
1212  * send_more_port_data()
1213  *
1214  *      This routine attempts to write additional UART transmit data
1215  *      to a port over the USB bulk pipe. It is called (1) when new
1216  *      data has been written to a port's TxBuffer from higher layers
1217  *      (2) when the peripheral sends us additional TxCredits indicating
1218  *      that it can accept more Tx data for a given port; and (3) when
1219  *      a bulk write completes successfully and we want to see if we
1220  *      can transmit more.
1221  *
1222  ************************************************************************/
1223 static void send_more_port_data(struct edgeport_serial *edge_serial, struct edgeport_port *edge_port)
1224 {
1225         struct TxFifo   *fifo = &edge_port->txfifo;
1226         struct urb      *urb;
1227         unsigned char   *buffer;
1228         int             status;
1229         int             count;
1230         int             bytesleft;
1231         int             firsthalf;
1232         int             secondhalf;
1233         unsigned long   flags;
1234
1235         dbg("%s(%d)", __FUNCTION__, edge_port->port->number);
1236
1237         spin_lock_irqsave(&edge_port->ep_lock, flags);
1238
1239         if (edge_port->write_in_progress ||
1240             !edge_port->open             ||
1241             (fifo->count == 0)) {
1242                 dbg("%s(%d) EXIT - fifo %d, PendingWrite = %d", __FUNCTION__, edge_port->port->number, fifo->count, edge_port->write_in_progress);
1243                 goto exit_send;
1244         }
1245
1246         // since the amount of data in the fifo will always fit into the
1247         // edgeport buffer we do not need to check the write length
1248
1249         //      Do we have enough credits for this port to make it worthwhile
1250         //      to bother queueing a write. If it's too small, say a few bytes,
1251         //      it's better to wait for more credits so we can do a larger
1252         //      write.
1253         if (edge_port->txCredits < EDGE_FW_GET_TX_CREDITS_SEND_THRESHOLD(edge_port->maxTxCredits,EDGE_FW_BULK_MAX_PACKET_SIZE)) {
1254                 dbg("%s(%d) Not enough credit - fifo %d TxCredit %d", __FUNCTION__, edge_port->port->number, fifo->count, edge_port->txCredits );
1255                 goto exit_send;
1256         }
1257
1258         // lock this write
1259         edge_port->write_in_progress = true;
1260
1261         // get a pointer to the write_urb
1262         urb = edge_port->write_urb;
1263
1264         /* make sure transfer buffer is freed */
1265         kfree(urb->transfer_buffer);
1266         urb->transfer_buffer = NULL;
1267
1268         /* build the data header for the buffer and port that we are about to send out */
1269         count = fifo->count;
1270         buffer = kmalloc (count+2, GFP_ATOMIC);
1271         if (buffer == NULL) {
1272                 dev_err(&edge_port->port->dev, "%s - no more kernel memory...\n", __FUNCTION__);
1273                 edge_port->write_in_progress = false;
1274                 goto exit_send;
1275         }
1276         buffer[0] = IOSP_BUILD_DATA_HDR1 (edge_port->port->number - edge_port->port->serial->minor, count);
1277         buffer[1] = IOSP_BUILD_DATA_HDR2 (edge_port->port->number - edge_port->port->serial->minor, count);
1278
1279         /* now copy our data */
1280         bytesleft =  fifo->size - fifo->tail;
1281         firsthalf = min (bytesleft, count);
1282         memcpy(&buffer[2], &fifo->fifo[fifo->tail], firsthalf);
1283         fifo->tail  += firsthalf;
1284         fifo->count -= firsthalf;
1285         if (fifo->tail == fifo->size) {
1286                 fifo->tail = 0;
1287         }
1288
1289         secondhalf = count-firsthalf;
1290         if (secondhalf) {
1291                 memcpy(&buffer[2+firsthalf], &fifo->fifo[fifo->tail], secondhalf);
1292                 fifo->tail  += secondhalf;
1293                 fifo->count -= secondhalf;
1294         }
1295
1296         if (count)
1297                 usb_serial_debug_data(debug, &edge_port->port->dev, __FUNCTION__, count, &buffer[2]);
1298
1299         /* fill up the urb with all of our data and submit it */
1300         usb_fill_bulk_urb (urb, edge_serial->serial->dev, 
1301                        usb_sndbulkpipe(edge_serial->serial->dev, edge_serial->bulk_out_endpoint),
1302                        buffer, count+2, edge_bulk_out_data_callback, edge_port);
1303
1304         /* decrement the number of credits we have by the number we just sent */
1305         edge_port->txCredits -= count;
1306         edge_port->icount.tx += count;
1307
1308         urb->dev = edge_serial->serial->dev;
1309         status = usb_submit_urb(urb, GFP_ATOMIC);
1310         if (status) {
1311                 /* something went wrong */
1312                 dev_err(&edge_port->port->dev, "%s - usb_submit_urb(write bulk) failed, status = %d, data lost\n", __FUNCTION__, status);
1313                 edge_port->write_in_progress = false;
1314
1315                 /* revert the credits as something bad happened. */
1316                 edge_port->txCredits += count;
1317                 edge_port->icount.tx -= count;
1318         }
1319         dbg("%s wrote %d byte(s) TxCredit %d, Fifo %d", __FUNCTION__, count, edge_port->txCredits, fifo->count);
1320
1321 exit_send:
1322         spin_unlock_irqrestore(&edge_port->ep_lock, flags);
1323 }
1324
1325
1326 /*****************************************************************************
1327  * edge_write_room
1328  *      this function is called by the tty driver when it wants to know how many
1329  *      bytes of data we can accept for a specific port.
1330  *      If successful, we return the amount of room that we have for this port
1331  *      (the txCredits), 
1332  *      Otherwise we return a negative error number.
1333  *****************************************************************************/
1334 static int edge_write_room (struct usb_serial_port *port)
1335 {
1336         struct edgeport_port *edge_port = usb_get_serial_port_data(port);
1337         int room;
1338         unsigned long flags;
1339
1340         dbg("%s", __FUNCTION__);
1341
1342         if (edge_port == NULL)
1343                 return -ENODEV;
1344         if (edge_port->closePending)
1345                 return -ENODEV;
1346
1347         dbg("%s - port %d", __FUNCTION__, port->number);
1348
1349         if (!edge_port->open) {
1350                 dbg("%s - port not opened", __FUNCTION__);
1351                 return -EINVAL;
1352         }
1353
1354         // total of both buffers is still txCredit
1355         spin_lock_irqsave(&edge_port->ep_lock, flags);
1356         room = edge_port->txCredits - edge_port->txfifo.count;
1357         spin_unlock_irqrestore(&edge_port->ep_lock, flags);
1358
1359         dbg("%s - returns %d", __FUNCTION__, room);
1360         return room;
1361 }
1362
1363
1364 /*****************************************************************************
1365  * edge_chars_in_buffer
1366  *      this function is called by the tty driver when it wants to know how many
1367  *      bytes of data we currently have outstanding in the port (data that has
1368  *      been written, but hasn't made it out the port yet)
1369  *      If successful, we return the number of bytes left to be written in the 
1370  *      system, 
1371  *      Otherwise we return a negative error number.
1372  *****************************************************************************/
1373 static int edge_chars_in_buffer (struct usb_serial_port *port)
1374 {
1375         struct edgeport_port *edge_port = usb_get_serial_port_data(port);
1376         int num_chars;
1377         unsigned long flags;
1378
1379         dbg("%s", __FUNCTION__);
1380
1381         if (edge_port == NULL)
1382                 return -ENODEV;
1383         if (edge_port->closePending)
1384                 return -ENODEV;
1385
1386         if (!edge_port->open) {
1387                 dbg("%s - port not opened", __FUNCTION__);
1388                 return -EINVAL;
1389         }
1390
1391         spin_lock_irqsave(&edge_port->ep_lock, flags);
1392         num_chars = edge_port->maxTxCredits - edge_port->txCredits + edge_port->txfifo.count;
1393         spin_unlock_irqrestore(&edge_port->ep_lock, flags);
1394         if (num_chars) {
1395                 dbg("%s(port %d) - returns %d", __FUNCTION__, port->number, num_chars);
1396         }
1397
1398         return num_chars;
1399 }
1400
1401
1402 /*****************************************************************************
1403  * SerialThrottle
1404  *      this function is called by the tty driver when it wants to stop the data
1405  *      being read from the port.
1406  *****************************************************************************/
1407 static void edge_throttle (struct usb_serial_port *port)
1408 {
1409         struct edgeport_port *edge_port = usb_get_serial_port_data(port);
1410         struct tty_struct *tty;
1411         int status;
1412
1413         dbg("%s - port %d", __FUNCTION__, port->number);
1414
1415         if (edge_port == NULL)
1416                 return;
1417
1418         if (!edge_port->open) {
1419                 dbg("%s - port not opened", __FUNCTION__);
1420                 return;
1421         }
1422
1423         tty = port->tty;
1424         if (!tty) {
1425                 dbg ("%s - no tty available", __FUNCTION__);
1426                 return;
1427         }
1428
1429         /* if we are implementing XON/XOFF, send the stop character */
1430         if (I_IXOFF(tty)) {
1431                 unsigned char stop_char = STOP_CHAR(tty);
1432                 status = edge_write (port, &stop_char, 1);
1433                 if (status <= 0) {
1434                         return;
1435                 }
1436         }
1437
1438         /* if we are implementing RTS/CTS, toggle that line */
1439         if (tty->termios->c_cflag & CRTSCTS) {
1440                 edge_port->shadowMCR &= ~MCR_RTS;
1441                 status = send_cmd_write_uart_register(edge_port, MCR, edge_port->shadowMCR);
1442                 if (status != 0) {
1443                         return;
1444                 }
1445         }
1446
1447         return;
1448 }
1449
1450
1451 /*****************************************************************************
1452  * edge_unthrottle
1453  *      this function is called by the tty driver when it wants to resume the data
1454  *      being read from the port (called after SerialThrottle is called)
1455  *****************************************************************************/
1456 static void edge_unthrottle (struct usb_serial_port *port)
1457 {
1458         struct edgeport_port *edge_port = usb_get_serial_port_data(port);
1459         struct tty_struct *tty;
1460         int status;
1461
1462         dbg("%s - port %d", __FUNCTION__, port->number);
1463
1464         if (edge_port == NULL)
1465                 return;
1466
1467         if (!edge_port->open) {
1468                 dbg("%s - port not opened", __FUNCTION__);
1469                 return;
1470         }
1471
1472         tty = port->tty;
1473         if (!tty) {
1474                 dbg ("%s - no tty available", __FUNCTION__);
1475                 return;
1476         }
1477
1478         /* if we are implementing XON/XOFF, send the start character */
1479         if (I_IXOFF(tty)) {
1480                 unsigned char start_char = START_CHAR(tty);
1481                 status = edge_write (port, &start_char, 1);
1482                 if (status <= 0) {
1483                         return;
1484                 }
1485         }
1486
1487         /* if we are implementing RTS/CTS, toggle that line */
1488         if (tty->termios->c_cflag & CRTSCTS) {
1489                 edge_port->shadowMCR |= MCR_RTS;
1490                 status = send_cmd_write_uart_register(edge_port, MCR, edge_port->shadowMCR);
1491                 if (status != 0) {
1492                         return;
1493                 }
1494         }
1495
1496         return;
1497 }
1498
1499
1500 /*****************************************************************************
1501  * SerialSetTermios
1502  *      this function is called by the tty driver when it wants to change the termios structure
1503  *****************************************************************************/
1504 static void edge_set_termios (struct usb_serial_port *port, struct ktermios *old_termios)
1505 {
1506         struct edgeport_port *edge_port = usb_get_serial_port_data(port);
1507         struct tty_struct *tty = port->tty;
1508         unsigned int cflag;
1509
1510         if (!port->tty || !port->tty->termios) {
1511                 dbg ("%s - no tty or termios", __FUNCTION__);
1512                 return;
1513         }
1514
1515         cflag = tty->termios->c_cflag;
1516         dbg("%s - clfag %08x iflag %08x", __FUNCTION__, 
1517             tty->termios->c_cflag, tty->termios->c_iflag);
1518         if (old_termios) {
1519                 dbg("%s - old clfag %08x old iflag %08x", __FUNCTION__,
1520                     old_termios->c_cflag, old_termios->c_iflag);
1521         }
1522
1523         dbg("%s - port %d", __FUNCTION__, port->number);
1524
1525         if (edge_port == NULL)
1526                 return;
1527
1528         if (!edge_port->open) {
1529                 dbg("%s - port not opened", __FUNCTION__);
1530                 return;
1531         }
1532
1533         /* change the port settings to the new ones specified */
1534         change_port_settings (edge_port, old_termios);
1535
1536         return;
1537 }
1538
1539
1540 /*****************************************************************************
1541  * get_lsr_info - get line status register info
1542  *
1543  * Purpose: Let user call ioctl() to get info when the UART physically
1544  *          is emptied.  On bus types like RS485, the transmitter must
1545  *          release the bus after transmitting. This must be done when
1546  *          the transmit shift register is empty, not be done when the
1547  *          transmit holding register is empty.  This functionality
1548  *          allows an RS485 driver to be written in user space. 
1549  *****************************************************************************/
1550 static int get_lsr_info(struct edgeport_port *edge_port, unsigned int __user *value)
1551 {
1552         unsigned int result = 0;
1553         unsigned long flags;
1554
1555         spin_lock_irqsave(&edge_port->ep_lock, flags);
1556         if (edge_port->maxTxCredits == edge_port->txCredits &&
1557             edge_port->txfifo.count == 0) {
1558                 dbg("%s -- Empty", __FUNCTION__);
1559                 result = TIOCSER_TEMT;
1560         }
1561         spin_unlock_irqrestore(&edge_port->ep_lock, flags);
1562
1563         if (copy_to_user(value, &result, sizeof(int)))
1564                 return -EFAULT;
1565         return 0;
1566 }
1567
1568 static int get_number_bytes_avail(struct edgeport_port *edge_port, unsigned int __user *value)
1569 {
1570         unsigned int result = 0;
1571         struct tty_struct *tty = edge_port->port->tty;
1572
1573         if (!tty)
1574                 return -ENOIOCTLCMD;
1575
1576         result = tty->read_cnt;
1577
1578         dbg("%s(%d) = %d", __FUNCTION__,  edge_port->port->number, result);
1579         if (copy_to_user(value, &result, sizeof(int)))
1580                 return -EFAULT;
1581         //return 0;
1582         return -ENOIOCTLCMD;
1583 }
1584
1585 static int edge_tiocmset (struct usb_serial_port *port, struct file *file, unsigned int set, unsigned int clear)
1586 {
1587         struct edgeport_port *edge_port = usb_get_serial_port_data(port);
1588         unsigned int mcr;
1589
1590         dbg("%s - port %d", __FUNCTION__, port->number);
1591
1592         mcr = edge_port->shadowMCR;
1593         if (set & TIOCM_RTS)
1594                 mcr |= MCR_RTS;
1595         if (set & TIOCM_DTR)
1596                 mcr |= MCR_DTR;
1597         if (set & TIOCM_LOOP)
1598                 mcr |= MCR_LOOPBACK;
1599
1600         if (clear & TIOCM_RTS)
1601                 mcr &= ~MCR_RTS;
1602         if (clear & TIOCM_DTR)
1603                 mcr &= ~MCR_DTR;
1604         if (clear & TIOCM_LOOP)
1605                 mcr &= ~MCR_LOOPBACK;
1606
1607         edge_port->shadowMCR = mcr;
1608
1609         send_cmd_write_uart_register(edge_port, MCR, edge_port->shadowMCR);
1610
1611         return 0;
1612 }
1613
1614 static int edge_tiocmget(struct usb_serial_port *port, struct file *file)
1615 {
1616         struct edgeport_port *edge_port = usb_get_serial_port_data(port);
1617         unsigned int result = 0;
1618         unsigned int msr;
1619         unsigned int mcr;
1620
1621         dbg("%s - port %d", __FUNCTION__, port->number);
1622
1623         msr = edge_port->shadowMSR;
1624         mcr = edge_port->shadowMCR;
1625         result = ((mcr & MCR_DTR)       ? TIOCM_DTR: 0)   /* 0x002 */
1626                   | ((mcr & MCR_RTS)    ? TIOCM_RTS: 0)   /* 0x004 */
1627                   | ((msr & EDGEPORT_MSR_CTS)   ? TIOCM_CTS: 0)   /* 0x020 */
1628                   | ((msr & EDGEPORT_MSR_CD)    ? TIOCM_CAR: 0)   /* 0x040 */
1629                   | ((msr & EDGEPORT_MSR_RI)    ? TIOCM_RI:  0)   /* 0x080 */
1630                   | ((msr & EDGEPORT_MSR_DSR)   ? TIOCM_DSR: 0);  /* 0x100 */
1631
1632
1633         dbg("%s -- %x", __FUNCTION__, result);
1634
1635         return result;
1636 }
1637
1638 static int get_serial_info(struct edgeport_port *edge_port, struct serial_struct __user *retinfo)
1639 {
1640         struct serial_struct tmp;
1641
1642         if (!retinfo)
1643                 return -EFAULT;
1644
1645         memset(&tmp, 0, sizeof(tmp));
1646
1647         tmp.type                = PORT_16550A;
1648         tmp.line                = edge_port->port->serial->minor;
1649         tmp.port                = edge_port->port->number;
1650         tmp.irq                 = 0;
1651         tmp.flags               = ASYNC_SKIP_TEST | ASYNC_AUTO_IRQ;
1652         tmp.xmit_fifo_size      = edge_port->maxTxCredits;
1653         tmp.baud_base           = 9600;
1654         tmp.close_delay         = 5*HZ;
1655         tmp.closing_wait        = 30*HZ;
1656 //      tmp.custom_divisor      = state->custom_divisor;
1657 //      tmp.hub6                = state->hub6;
1658 //      tmp.io_type             = state->io_type;
1659
1660         if (copy_to_user(retinfo, &tmp, sizeof(*retinfo)))
1661                 return -EFAULT;
1662         return 0;
1663 }
1664
1665
1666
1667 /*****************************************************************************
1668  * SerialIoctl
1669  *      this function handles any ioctl calls to the driver
1670  *****************************************************************************/
1671 static int edge_ioctl (struct usb_serial_port *port, struct file *file, unsigned int cmd, unsigned long arg)
1672 {
1673         DEFINE_WAIT(wait);
1674         struct edgeport_port *edge_port = usb_get_serial_port_data(port);
1675         struct async_icount cnow;
1676         struct async_icount cprev;
1677         struct serial_icounter_struct icount;
1678
1679         dbg("%s - port %d, cmd = 0x%x", __FUNCTION__, port->number, cmd);
1680
1681         switch (cmd) {
1682                 // return number of bytes available
1683                 case TIOCINQ:
1684                         dbg("%s (%d) TIOCINQ", __FUNCTION__,  port->number);
1685                         return get_number_bytes_avail(edge_port, (unsigned int __user *) arg);
1686                         break;
1687
1688                 case TIOCSERGETLSR:
1689                         dbg("%s (%d) TIOCSERGETLSR", __FUNCTION__,  port->number);
1690                         return get_lsr_info(edge_port, (unsigned int __user *) arg);
1691                         return 0;
1692
1693                 case TIOCGSERIAL:
1694                         dbg("%s (%d) TIOCGSERIAL", __FUNCTION__,  port->number);
1695                         return get_serial_info(edge_port, (struct serial_struct __user *) arg);
1696
1697                 case TIOCSSERIAL:
1698                         dbg("%s (%d) TIOCSSERIAL", __FUNCTION__,  port->number);
1699                         break;
1700
1701                 case TIOCMIWAIT:
1702                         dbg("%s (%d) TIOCMIWAIT", __FUNCTION__,  port->number);
1703                         cprev = edge_port->icount;
1704                         while (1) {
1705                                 prepare_to_wait(&edge_port->delta_msr_wait, &wait, TASK_INTERRUPTIBLE);
1706                                 schedule();
1707                                 finish_wait(&edge_port->delta_msr_wait, &wait);
1708                                 /* see if a signal did it */
1709                                 if (signal_pending(current))
1710                                         return -ERESTARTSYS;
1711                                 cnow = edge_port->icount;
1712                                 if (cnow.rng == cprev.rng && cnow.dsr == cprev.dsr &&
1713                                     cnow.dcd == cprev.dcd && cnow.cts == cprev.cts)
1714                                         return -EIO; /* no change => error */
1715                                 if (((arg & TIOCM_RNG) && (cnow.rng != cprev.rng)) ||
1716                                     ((arg & TIOCM_DSR) && (cnow.dsr != cprev.dsr)) ||
1717                                     ((arg & TIOCM_CD)  && (cnow.dcd != cprev.dcd)) ||
1718                                     ((arg & TIOCM_CTS) && (cnow.cts != cprev.cts)) ) {
1719                                         return 0;
1720                                 }
1721                                 cprev = cnow;
1722                         }
1723                         /* NOTREACHED */
1724                         break;
1725
1726                 case TIOCGICOUNT:
1727                         cnow = edge_port->icount;
1728                         memset(&icount, 0, sizeof(icount));
1729                         icount.cts = cnow.cts;
1730                         icount.dsr = cnow.dsr;
1731                         icount.rng = cnow.rng;
1732                         icount.dcd = cnow.dcd;
1733                         icount.rx = cnow.rx;
1734                         icount.tx = cnow.tx;
1735                         icount.frame = cnow.frame;
1736                         icount.overrun = cnow.overrun;
1737                         icount.parity = cnow.parity;
1738                         icount.brk = cnow.brk;
1739                         icount.buf_overrun = cnow.buf_overrun;
1740
1741                         dbg("%s (%d) TIOCGICOUNT RX=%d, TX=%d", __FUNCTION__,  port->number, icount.rx, icount.tx );
1742                         if (copy_to_user((void __user *)arg, &icount, sizeof(icount)))
1743                                 return -EFAULT;
1744                         return 0;
1745         }
1746
1747         return -ENOIOCTLCMD;
1748 }
1749
1750
1751 /*****************************************************************************
1752  * SerialBreak
1753  *      this function sends a break to the port
1754  *****************************************************************************/
1755 static void edge_break (struct usb_serial_port *port, int break_state)
1756 {
1757         struct edgeport_port *edge_port = usb_get_serial_port_data(port);
1758         struct edgeport_serial *edge_serial = usb_get_serial_data(port->serial);
1759         int status;
1760
1761         if ((!edge_serial->is_epic) ||
1762             ((edge_serial->is_epic) &&
1763              (edge_serial->epic_descriptor.Supports.IOSPChase))) {
1764                 /* flush and chase */
1765                 edge_port->chaseResponsePending = true;
1766
1767                 dbg("%s - Sending IOSP_CMD_CHASE_PORT", __FUNCTION__);
1768                 status = send_iosp_ext_cmd (edge_port, IOSP_CMD_CHASE_PORT, 0);
1769                 if (status == 0) {
1770                         // block until chase finished
1771                         block_until_chase_response(edge_port);
1772                 } else {
1773                         edge_port->chaseResponsePending = false;
1774                 }
1775         }
1776
1777         if ((!edge_serial->is_epic) ||
1778             ((edge_serial->is_epic) &&
1779              (edge_serial->epic_descriptor.Supports.IOSPSetClrBreak))) {
1780                 if (break_state == -1) {
1781                         dbg("%s - Sending IOSP_CMD_SET_BREAK", __FUNCTION__);
1782                         status = send_iosp_ext_cmd (edge_port, IOSP_CMD_SET_BREAK, 0);
1783                 } else {
1784                         dbg("%s - Sending IOSP_CMD_CLEAR_BREAK", __FUNCTION__);
1785                         status = send_iosp_ext_cmd (edge_port, IOSP_CMD_CLEAR_BREAK, 0);
1786                 }
1787                 if (status) {
1788                         dbg("%s - error sending break set/clear command.", __FUNCTION__);
1789                 }
1790         }
1791
1792         return;
1793 }
1794
1795
1796 /*****************************************************************************
1797  * process_rcvd_data
1798  *      this function handles the data received on the bulk in pipe.
1799  *****************************************************************************/
1800 static void process_rcvd_data (struct edgeport_serial *edge_serial, unsigned char * buffer, __u16 bufferLength)
1801 {
1802         struct usb_serial_port *port;
1803         struct edgeport_port *edge_port;
1804         struct tty_struct *tty;
1805         __u16 lastBufferLength;
1806         __u16 rxLen;
1807
1808         dbg("%s", __FUNCTION__);
1809
1810         lastBufferLength = bufferLength + 1;
1811
1812         while (bufferLength > 0) {
1813                 /* failsafe incase we get a message that we don't understand */
1814                 if (lastBufferLength == bufferLength) {
1815                         dbg("%s - stuck in loop, exiting it.", __FUNCTION__);
1816                         break;
1817                 }
1818                 lastBufferLength = bufferLength;
1819
1820                 switch (edge_serial->rxState) {
1821                         case EXPECT_HDR1:
1822                                 edge_serial->rxHeader1 = *buffer;
1823                                 ++buffer;
1824                                 --bufferLength;
1825
1826                                 if (bufferLength == 0) {
1827                                         edge_serial->rxState = EXPECT_HDR2;
1828                                         break;
1829                                 }
1830                                 /* otherwise, drop on through */
1831
1832                         case EXPECT_HDR2:
1833                                 edge_serial->rxHeader2 = *buffer;
1834                                 ++buffer;
1835                                 --bufferLength;
1836
1837                                 dbg("%s - Hdr1=%02X Hdr2=%02X", __FUNCTION__, edge_serial->rxHeader1, edge_serial->rxHeader2);
1838
1839                                 // Process depending on whether this header is
1840                                 // data or status
1841
1842                                 if (IS_CMD_STAT_HDR(edge_serial->rxHeader1)) {
1843                                         // Decode this status header and goto EXPECT_HDR1 (if we
1844                                         // can process the status with only 2 bytes), or goto
1845                                         // EXPECT_HDR3 to get the third byte.
1846
1847                                         edge_serial->rxPort       = IOSP_GET_HDR_PORT(edge_serial->rxHeader1);
1848                                         edge_serial->rxStatusCode = IOSP_GET_STATUS_CODE(edge_serial->rxHeader1);
1849
1850                                         if (!IOSP_STATUS_IS_2BYTE(edge_serial->rxStatusCode)) {
1851                                                 // This status needs additional bytes. Save what we have
1852                                                 // and then wait for more data.
1853                                                 edge_serial->rxStatusParam = edge_serial->rxHeader2;
1854
1855                                                 edge_serial->rxState = EXPECT_HDR3;
1856                                                 break;
1857                                         }
1858
1859                                         // We have all the header bytes, process the status now
1860                                         process_rcvd_status (edge_serial, edge_serial->rxHeader2, 0);
1861                                         edge_serial->rxState = EXPECT_HDR1;
1862                                         break;
1863                                 } else {
1864                                         edge_serial->rxPort = IOSP_GET_HDR_PORT(edge_serial->rxHeader1);
1865                                         edge_serial->rxBytesRemaining = IOSP_GET_HDR_DATA_LEN(edge_serial->rxHeader1, edge_serial->rxHeader2);
1866
1867                                         dbg("%s - Data for Port %u Len %u", __FUNCTION__, edge_serial->rxPort, edge_serial->rxBytesRemaining);
1868
1869                                         //ASSERT( DevExt->RxPort < DevExt->NumPorts );
1870                                         //ASSERT( DevExt->RxBytesRemaining < IOSP_MAX_DATA_LENGTH );
1871
1872                                         if (bufferLength == 0 ) {
1873                                                 edge_serial->rxState = EXPECT_DATA;
1874                                                 break;
1875                                         }
1876                                         // Else, drop through
1877                                 }
1878
1879                         case EXPECT_DATA:       // Expect data
1880
1881                                 if (bufferLength < edge_serial->rxBytesRemaining) {
1882                                         rxLen = bufferLength;
1883                                         edge_serial->rxState = EXPECT_DATA;     // Expect data to start next buffer
1884                                 } else {
1885                                         // BufLen >= RxBytesRemaining
1886                                         rxLen = edge_serial->rxBytesRemaining;
1887                                         edge_serial->rxState = EXPECT_HDR1;     // Start another header next time
1888                                 }
1889
1890                                 bufferLength -= rxLen;
1891                                 edge_serial->rxBytesRemaining -= rxLen;
1892
1893                                 /* spit this data back into the tty driver if this port is open */
1894                                 if (rxLen) {
1895                                         port = edge_serial->serial->port[edge_serial->rxPort];
1896                                         edge_port = usb_get_serial_port_data(port);
1897                                         if (edge_port->open) {
1898                                                 tty = edge_port->port->tty;
1899                                                 if (tty) {
1900                                                         dbg("%s - Sending %d bytes to TTY for port %d", __FUNCTION__, rxLen, edge_serial->rxPort);
1901                                                         edge_tty_recv(&edge_serial->serial->dev->dev, tty, buffer, rxLen);
1902                                                 }
1903                                                 edge_port->icount.rx += rxLen;
1904                                         }
1905                                         buffer += rxLen;
1906                                 }
1907
1908                                 break;
1909
1910                         case EXPECT_HDR3:                       // Expect 3rd byte of status header
1911                                 edge_serial->rxHeader3 = *buffer;
1912                                 ++buffer;
1913                                 --bufferLength;
1914
1915                                 // We have all the header bytes, process the status now
1916                                 process_rcvd_status (edge_serial, edge_serial->rxStatusParam, edge_serial->rxHeader3);
1917                                 edge_serial->rxState = EXPECT_HDR1;
1918                                 break;
1919
1920                 }
1921         }
1922 }
1923
1924
1925 /*****************************************************************************
1926  * process_rcvd_status
1927  *      this function handles the any status messages received on the bulk in pipe.
1928  *****************************************************************************/
1929 static void process_rcvd_status (struct edgeport_serial *edge_serial, __u8 byte2, __u8 byte3)
1930 {
1931         struct usb_serial_port *port;
1932         struct edgeport_port *edge_port;
1933         __u8 code = edge_serial->rxStatusCode;
1934
1935         /* switch the port pointer to the one being currently talked about */
1936         port = edge_serial->serial->port[edge_serial->rxPort];
1937         edge_port = usb_get_serial_port_data(port);
1938         if (edge_port == NULL) {
1939                 dev_err(&edge_serial->serial->dev->dev, "%s - edge_port == NULL for port %d\n", __FUNCTION__, edge_serial->rxPort);
1940                 return;
1941         }
1942
1943         dbg("%s - port %d", __FUNCTION__, edge_serial->rxPort);
1944
1945         if (code == IOSP_EXT_STATUS) {
1946                 switch (byte2) {
1947                         case IOSP_EXT_STATUS_CHASE_RSP:
1948                                 // we want to do EXT status regardless of port open/closed 
1949                                 dbg("%s - Port %u EXT CHASE_RSP Data = %02x", __FUNCTION__, edge_serial->rxPort, byte3 );
1950                                 // Currently, the only EXT_STATUS is Chase, so process here instead of one more call
1951                                 // to one more subroutine. If/when more EXT_STATUS, there'll be more work to do.
1952                                 // Also, we currently clear flag and close the port regardless of content of above's Byte3.
1953                                 // We could choose to do something else when Byte3 says Timeout on Chase from Edgeport,
1954                                 // like wait longer in block_until_chase_response, but for now we don't. 
1955                                 edge_port->chaseResponsePending = false;
1956                                 wake_up (&edge_port->wait_chase);
1957                                 return;
1958
1959                         case IOSP_EXT_STATUS_RX_CHECK_RSP:
1960                                 dbg("%s ========== Port %u CHECK_RSP Sequence = %02x =============\n", __FUNCTION__, edge_serial->rxPort, byte3 );
1961                                 //Port->RxCheckRsp = true;
1962                                 return;
1963                 }
1964         }
1965
1966         if (code == IOSP_STATUS_OPEN_RSP) {
1967                 edge_port->txCredits = GET_TX_BUFFER_SIZE(byte3);
1968                 edge_port->maxTxCredits = edge_port->txCredits;
1969                 dbg("%s - Port %u Open Response Inital MSR = %02x TxBufferSize = %d", __FUNCTION__, edge_serial->rxPort, byte2, edge_port->txCredits);
1970                 handle_new_msr (edge_port, byte2);
1971
1972                 /* send the current line settings to the port so we are in sync with any further termios calls */
1973                 if (edge_port->port->tty)
1974                         change_port_settings (edge_port, edge_port->port->tty->termios);
1975
1976                 /* we have completed the open */
1977                 edge_port->openPending = false;
1978                 edge_port->open = true;
1979                 wake_up(&edge_port->wait_open);
1980                 return;
1981         }
1982
1983         // If port is closed, silently discard all rcvd status. We can
1984         // have cases where buffered status is received AFTER the close
1985         // port command is sent to the Edgeport.
1986         if (!edge_port->open || edge_port->closePending) {
1987                 return;
1988         }
1989
1990         switch (code) {
1991                 // Not currently sent by Edgeport
1992                 case IOSP_STATUS_LSR:
1993                         dbg("%s - Port %u LSR Status = %02x", __FUNCTION__, edge_serial->rxPort, byte2);
1994                         handle_new_lsr(edge_port, false, byte2, 0);
1995                         break;
1996
1997                 case IOSP_STATUS_LSR_DATA:
1998                         dbg("%s - Port %u LSR Status = %02x, Data = %02x", __FUNCTION__, edge_serial->rxPort, byte2, byte3);
1999                         // byte2 is LSR Register
2000                         // byte3 is broken data byte
2001                         handle_new_lsr(edge_port, true, byte2, byte3);
2002                         break;
2003                         //
2004                         //      case IOSP_EXT_4_STATUS:
2005                         //              dbg("%s - Port %u LSR Status = %02x Data = %02x", __FUNCTION__, edge_serial->rxPort, byte2, byte3);
2006                         //              break;
2007                         //
2008                 case IOSP_STATUS_MSR:
2009                         dbg("%s - Port %u MSR Status = %02x", __FUNCTION__, edge_serial->rxPort, byte2);
2010
2011                         // Process this new modem status and generate appropriate
2012                         // events, etc, based on the new status. This routine
2013                         // also saves the MSR in Port->ShadowMsr.
2014                         handle_new_msr(edge_port, byte2);
2015                         break;
2016
2017                 default:
2018                         dbg("%s - Unrecognized IOSP status code %u\n", __FUNCTION__, code);
2019                         break;
2020         }
2021
2022         return;
2023 }
2024
2025
2026 /*****************************************************************************
2027  * edge_tty_recv
2028  *      this function passes data on to the tty flip buffer
2029  *****************************************************************************/
2030 static void edge_tty_recv(struct device *dev, struct tty_struct *tty, unsigned char *data, int length)
2031 {
2032         int cnt;
2033
2034         do {
2035                 cnt = tty_buffer_request_room(tty, length);
2036                 if (cnt < length) {
2037                         dev_err(dev, "%s - dropping data, %d bytes lost\n",
2038                                         __FUNCTION__, length - cnt);
2039                         if(cnt == 0)
2040                                 break;
2041                 }
2042                 tty_insert_flip_string(tty, data, cnt);
2043                 data += cnt;
2044                 length -= cnt;
2045         } while (length > 0);
2046
2047         tty_flip_buffer_push(tty);
2048 }
2049
2050
2051 /*****************************************************************************
2052  * handle_new_msr
2053  *      this function handles any change to the msr register for a port.
2054  *****************************************************************************/
2055 static void handle_new_msr(struct edgeport_port *edge_port, __u8 newMsr)
2056 {
2057         struct  async_icount *icount;
2058
2059         dbg("%s %02x", __FUNCTION__, newMsr);
2060
2061         if (newMsr & (EDGEPORT_MSR_DELTA_CTS | EDGEPORT_MSR_DELTA_DSR | EDGEPORT_MSR_DELTA_RI | EDGEPORT_MSR_DELTA_CD)) {
2062                 icount = &edge_port->icount;
2063
2064                 /* update input line counters */
2065                 if (newMsr & EDGEPORT_MSR_DELTA_CTS) {
2066                         icount->cts++;
2067                 }
2068                 if (newMsr & EDGEPORT_MSR_DELTA_DSR) {
2069                         icount->dsr++;
2070                 }
2071                 if (newMsr & EDGEPORT_MSR_DELTA_CD) {
2072                         icount->dcd++;
2073                 }
2074                 if (newMsr & EDGEPORT_MSR_DELTA_RI) {
2075                         icount->rng++;
2076                 }
2077                 wake_up_interruptible(&edge_port->delta_msr_wait);
2078         }
2079
2080         /* Save the new modem status */
2081         edge_port->shadowMSR = newMsr & 0xf0;
2082
2083         return;
2084 }
2085
2086
2087 /*****************************************************************************
2088  * handle_new_lsr
2089  *      this function handles any change to the lsr register for a port.
2090  *****************************************************************************/
2091 static void handle_new_lsr(struct edgeport_port *edge_port, __u8 lsrData, __u8 lsr, __u8 data)
2092 {
2093         __u8    newLsr = (__u8)(lsr & (__u8)(LSR_OVER_ERR | LSR_PAR_ERR | LSR_FRM_ERR | LSR_BREAK));
2094         struct  async_icount *icount;
2095
2096         dbg("%s - %02x", __FUNCTION__, newLsr);
2097
2098         edge_port->shadowLSR = lsr;
2099
2100         if (newLsr & LSR_BREAK) {
2101                 //
2102                 // Parity and Framing errors only count if they
2103                 // occur exclusive of a break being
2104                 // received.
2105                 //
2106                 newLsr &= (__u8)(LSR_OVER_ERR | LSR_BREAK);
2107         }
2108
2109         /* Place LSR data byte into Rx buffer */
2110         if (lsrData && edge_port->port->tty)
2111                 edge_tty_recv(&edge_port->port->dev, edge_port->port->tty, &data, 1);
2112
2113         /* update input line counters */
2114         icount = &edge_port->icount;
2115         if (newLsr & LSR_BREAK) {
2116                 icount->brk++;
2117         }
2118         if (newLsr & LSR_OVER_ERR) {
2119                 icount->overrun++;
2120         }
2121         if (newLsr & LSR_PAR_ERR) {
2122                 icount->parity++;
2123         }
2124         if (newLsr & LSR_FRM_ERR) {
2125                 icount->frame++;
2126         }
2127
2128         return;
2129 }
2130
2131
2132 /****************************************************************************
2133  * sram_write
2134  *      writes a number of bytes to the Edgeport device's sram starting at the 
2135  *      given address.
2136  *      If successful returns the number of bytes written, otherwise it returns
2137  *      a negative error number of the problem.
2138  ****************************************************************************/
2139 static int sram_write (struct usb_serial *serial, __u16 extAddr, __u16 addr, __u16 length, __u8 *data)
2140 {
2141         int result;
2142         __u16 current_length;
2143         unsigned char *transfer_buffer;
2144
2145         dbg("%s - %x, %x, %d", __FUNCTION__, extAddr, addr, length);
2146
2147         transfer_buffer =  kmalloc (64, GFP_KERNEL);
2148         if (!transfer_buffer) {
2149                 dev_err(&serial->dev->dev, "%s - kmalloc(%d) failed.\n", __FUNCTION__, 64);
2150                 return -ENOMEM;
2151         }
2152
2153         /* need to split these writes up into 64 byte chunks */
2154         result = 0;
2155         while (length > 0) {
2156                 if (length > 64) {
2157                         current_length = 64;
2158                 } else {
2159                         current_length = length;
2160                 }
2161 //              dbg("%s - writing %x, %x, %d", __FUNCTION__, extAddr, addr, current_length);
2162                 memcpy (transfer_buffer, data, current_length);
2163                 result = usb_control_msg (serial->dev, usb_sndctrlpipe(serial->dev, 0), USB_REQUEST_ION_WRITE_RAM, 
2164                                           0x40, addr, extAddr, transfer_buffer, current_length, 300);
2165                 if (result < 0)
2166                         break;
2167                 length -= current_length;
2168                 addr += current_length;
2169                 data += current_length;
2170         }       
2171
2172         kfree (transfer_buffer);
2173         return result;
2174 }
2175
2176
2177 /****************************************************************************
2178  * rom_write
2179  *      writes a number of bytes to the Edgeport device's ROM starting at the
2180  *      given address.
2181  *      If successful returns the number of bytes written, otherwise it returns
2182  *      a negative error number of the problem.
2183  ****************************************************************************/
2184 static int rom_write (struct usb_serial *serial, __u16 extAddr, __u16 addr, __u16 length, __u8 *data)
2185 {
2186         int result;
2187         __u16 current_length;
2188         unsigned char *transfer_buffer;
2189
2190 //      dbg("%s - %x, %x, %d", __FUNCTION__, extAddr, addr, length);
2191
2192         transfer_buffer =  kmalloc (64, GFP_KERNEL);
2193         if (!transfer_buffer) {
2194                 dev_err(&serial->dev->dev, "%s - kmalloc(%d) failed.\n", __FUNCTION__, 64);
2195                 return -ENOMEM;
2196         }
2197
2198         /* need to split these writes up into 64 byte chunks */
2199         result = 0;
2200         while (length > 0) {
2201                 if (length > 64) {
2202                         current_length = 64;
2203                 } else {
2204                         current_length = length;
2205                 }
2206 //              dbg("%s - writing %x, %x, %d", __FUNCTION__, extAddr, addr, current_length);
2207                 memcpy (transfer_buffer, data, current_length);
2208                 result = usb_control_msg (serial->dev, usb_sndctrlpipe(serial->dev, 0), USB_REQUEST_ION_WRITE_ROM, 
2209                                           0x40, addr, extAddr, transfer_buffer, current_length, 300);
2210                 if (result < 0)
2211                         break;
2212                 length -= current_length;
2213                 addr += current_length;
2214                 data += current_length;
2215         }       
2216
2217         kfree (transfer_buffer);
2218         return result;
2219 }
2220
2221
2222 /****************************************************************************
2223  * rom_read
2224  *      reads a number of bytes from the Edgeport device starting at the given
2225  *      address.
2226  *      If successful returns the number of bytes read, otherwise it returns
2227  *      a negative error number of the problem.
2228  ****************************************************************************/
2229 static int rom_read (struct usb_serial *serial, __u16 extAddr, __u16 addr, __u16 length, __u8 *data)
2230 {
2231         int result;
2232         __u16 current_length;
2233         unsigned char *transfer_buffer;
2234
2235         dbg("%s - %x, %x, %d", __FUNCTION__, extAddr, addr, length);
2236
2237         transfer_buffer =  kmalloc (64, GFP_KERNEL);
2238         if (!transfer_buffer) {
2239                 dev_err(&serial->dev->dev, "%s - kmalloc(%d) failed.\n", __FUNCTION__, 64);
2240                 return -ENOMEM;
2241         }
2242
2243         /* need to split these reads up into 64 byte chunks */
2244         result = 0;
2245         while (length > 0) {
2246                 if (length > 64) {
2247                         current_length = 64;
2248                 } else {
2249                         current_length = length;
2250                 }
2251 //              dbg("%s - %x, %x, %d", __FUNCTION__, extAddr, addr, current_length);
2252                 result = usb_control_msg (serial->dev, usb_rcvctrlpipe(serial->dev, 0), USB_REQUEST_ION_READ_ROM, 
2253                                           0xC0, addr, extAddr, transfer_buffer, current_length, 300);
2254                 if (result < 0)
2255                         break;
2256                 memcpy (data, transfer_buffer, current_length);
2257                 length -= current_length;
2258                 addr += current_length;
2259                 data += current_length;
2260         }       
2261
2262         kfree (transfer_buffer);
2263         return result;
2264 }
2265
2266
2267 /****************************************************************************
2268  * send_iosp_ext_cmd
2269  *      Is used to send a IOSP message to the Edgeport device
2270  ****************************************************************************/
2271 static int send_iosp_ext_cmd (struct edgeport_port *edge_port, __u8 command, __u8 param)
2272 {
2273         unsigned char   *buffer;
2274         unsigned char   *currentCommand;
2275         int             length = 0;
2276         int             status = 0;
2277
2278         dbg("%s - %d, %d", __FUNCTION__, command, param);
2279
2280         buffer =  kmalloc (10, GFP_ATOMIC);
2281         if (!buffer) {
2282                 dev_err(&edge_port->port->dev, "%s - kmalloc(%d) failed.\n", __FUNCTION__, 10);
2283                 return -ENOMEM;
2284         }
2285
2286         currentCommand = buffer;
2287
2288         MAKE_CMD_EXT_CMD (&currentCommand, &length,
2289                           edge_port->port->number - edge_port->port->serial->minor,
2290                           command, param);
2291
2292         status = write_cmd_usb (edge_port, buffer, length);
2293         if (status) {
2294                 /* something bad happened, let's free up the memory */
2295                 kfree(buffer);
2296         }
2297
2298         return status;
2299 }
2300
2301
2302 /*****************************************************************************
2303  * write_cmd_usb
2304  *      this function writes the given buffer out to the bulk write endpoint.
2305  *****************************************************************************/
2306 static int write_cmd_usb (struct edgeport_port *edge_port, unsigned char *buffer, int length)
2307 {
2308         struct edgeport_serial *edge_serial = usb_get_serial_data(edge_port->port->serial);
2309         int status = 0;
2310         struct urb *urb;
2311         int timeout;
2312
2313         usb_serial_debug_data(debug, &edge_port->port->dev, __FUNCTION__, length, buffer);
2314
2315         /* Allocate our next urb */
2316         urb = usb_alloc_urb (0, GFP_ATOMIC);
2317         if (!urb)
2318                 return -ENOMEM;
2319
2320         atomic_inc(&CmdUrbs);
2321         dbg("%s - ALLOCATE URB %p (outstanding %d)", __FUNCTION__, urb, atomic_read(&CmdUrbs));
2322
2323         usb_fill_bulk_urb (urb, edge_serial->serial->dev, 
2324                        usb_sndbulkpipe(edge_serial->serial->dev, edge_serial->bulk_out_endpoint),
2325                        buffer, length, edge_bulk_out_cmd_callback, edge_port);
2326
2327         edge_port->commandPending = true;
2328         status = usb_submit_urb(urb, GFP_ATOMIC);
2329
2330         if (status) {
2331                 /* something went wrong */
2332                 dev_err(&edge_port->port->dev, "%s - usb_submit_urb(write command) failed, status = %d\n", __FUNCTION__, status);
2333                 usb_kill_urb(urb);
2334                 usb_free_urb(urb);
2335                 atomic_dec(&CmdUrbs);
2336                 return status;
2337         }
2338
2339         // wait for command to finish
2340         timeout = COMMAND_TIMEOUT;
2341 #if 0
2342         wait_event (&edge_port->wait_command, !edge_port->commandPending);
2343
2344         if (edge_port->commandPending) {
2345                 /* command timed out */
2346                 dbg("%s - command timed out", __FUNCTION__);
2347                 status = -EINVAL;
2348         }
2349 #endif
2350         return status;
2351 }
2352
2353
2354 /*****************************************************************************
2355  * send_cmd_write_baud_rate
2356  *      this function sends the proper command to change the baud rate of the
2357  *      specified port.
2358  *****************************************************************************/
2359 static int send_cmd_write_baud_rate (struct edgeport_port *edge_port, int baudRate)
2360 {
2361         struct edgeport_serial *edge_serial = usb_get_serial_data(edge_port->port->serial);
2362         unsigned char *cmdBuffer;
2363         unsigned char *currCmd;
2364         int cmdLen = 0;
2365         int divisor;
2366         int status;
2367         unsigned char number = edge_port->port->number - edge_port->port->serial->minor;
2368
2369         if (edge_serial->is_epic &&
2370             !edge_serial->epic_descriptor.Supports.IOSPSetBaudRate) {
2371                 dbg("SendCmdWriteBaudRate - NOT Setting baud rate for port = %d, baud = %d",
2372                     edge_port->port->number, baudRate);
2373                 return 0;
2374         }
2375
2376         dbg("%s - port = %d, baud = %d", __FUNCTION__, edge_port->port->number, baudRate);
2377
2378         status = calc_baud_rate_divisor (baudRate, &divisor);
2379         if (status) {
2380                 dev_err(&edge_port->port->dev, "%s - bad baud rate\n", __FUNCTION__);
2381                 return status;
2382         }
2383
2384         // Alloc memory for the string of commands.
2385         cmdBuffer =  kmalloc (0x100, GFP_ATOMIC);
2386         if (!cmdBuffer) {
2387                 dev_err(&edge_port->port->dev, "%s - kmalloc(%d) failed.\n", __FUNCTION__, 0x100);
2388                 return -ENOMEM;
2389         }
2390         currCmd = cmdBuffer;
2391
2392         // Enable access to divisor latch
2393         MAKE_CMD_WRITE_REG( &currCmd, &cmdLen, number, LCR, LCR_DL_ENABLE );
2394
2395         // Write the divisor itself
2396         MAKE_CMD_WRITE_REG( &currCmd, &cmdLen, number, DLL, LOW8 (divisor) );
2397         MAKE_CMD_WRITE_REG( &currCmd, &cmdLen, number, DLM, HIGH8(divisor) );
2398
2399         // Restore original value to disable access to divisor latch
2400         MAKE_CMD_WRITE_REG( &currCmd, &cmdLen, number, LCR, edge_port->shadowLCR);
2401
2402         status = write_cmd_usb(edge_port, cmdBuffer, cmdLen );
2403         if (status) {
2404                 /* something bad happened, let's free up the memory */
2405                 kfree (cmdBuffer);
2406         }
2407
2408         return status;
2409 }
2410
2411
2412 /*****************************************************************************
2413  * calc_baud_rate_divisor
2414  *      this function calculates the proper baud rate divisor for the specified
2415  *      baud rate.
2416  *****************************************************************************/
2417 static int calc_baud_rate_divisor (int baudrate, int *divisor)
2418 {
2419         int i;
2420         __u16 custom;
2421
2422
2423         dbg("%s - %d", __FUNCTION__, baudrate);
2424
2425         for (i = 0; i < ARRAY_SIZE(divisor_table); i++) {
2426                 if ( divisor_table[i].BaudRate == baudrate ) {
2427                         *divisor = divisor_table[i].Divisor;
2428                         return 0;
2429                 }
2430         }
2431
2432         // We have tried all of the standard baud rates
2433         // lets try to calculate the divisor for this baud rate
2434         // Make sure the baud rate is reasonable
2435         if (baudrate > 50 && baudrate < 230400) {
2436                 // get divisor
2437                 custom = (__u16)((230400L + baudrate/2) / baudrate);
2438
2439                 *divisor = custom;
2440
2441                 dbg("%s - Baud %d = %d\n", __FUNCTION__, baudrate, custom);
2442                 return 0;
2443         }
2444
2445         return -1;
2446 }
2447
2448
2449 /*****************************************************************************
2450  * send_cmd_write_uart_register
2451  *      this function builds up a uart register message and sends to to the device.
2452  *****************************************************************************/
2453 static int send_cmd_write_uart_register (struct edgeport_port *edge_port, __u8 regNum, __u8 regValue)
2454 {
2455         struct edgeport_serial *edge_serial = usb_get_serial_data(edge_port->port->serial);
2456         unsigned char *cmdBuffer;
2457         unsigned char *currCmd;
2458         unsigned long cmdLen = 0;
2459         int status;
2460
2461         dbg("%s - write to %s register 0x%02x", (regNum == MCR) ? "MCR" : "LCR", __FUNCTION__, regValue);
2462
2463         if (edge_serial->is_epic &&
2464             !edge_serial->epic_descriptor.Supports.IOSPWriteMCR &&
2465             regNum == MCR) {
2466                 dbg("SendCmdWriteUartReg - Not writing to MCR Register");
2467                 return 0;
2468         }
2469
2470         if (edge_serial->is_epic &&
2471             !edge_serial->epic_descriptor.Supports.IOSPWriteLCR &&
2472             regNum == LCR) {
2473                 dbg ("SendCmdWriteUartReg - Not writing to LCR Register");
2474                 return 0;
2475         }
2476
2477         // Alloc memory for the string of commands.
2478         cmdBuffer = kmalloc (0x10, GFP_ATOMIC);
2479         if (cmdBuffer == NULL ) {
2480                 return -ENOMEM;
2481         }
2482
2483         currCmd = cmdBuffer;
2484
2485         // Build a cmd in the buffer to write the given register
2486         MAKE_CMD_WRITE_REG (&currCmd, &cmdLen,
2487                             edge_port->port->number - edge_port->port->serial->minor,
2488                             regNum, regValue);
2489
2490         status = write_cmd_usb(edge_port, cmdBuffer, cmdLen);
2491         if (status) {
2492                 /* something bad happened, let's free up the memory */
2493                 kfree (cmdBuffer);
2494         }
2495
2496         return status;
2497 }
2498
2499
2500 /*****************************************************************************
2501  * change_port_settings
2502  *      This routine is called to set the UART on the device to match the specified
2503  *      new settings.
2504  *****************************************************************************/
2505 #ifndef CMSPAR
2506 #define CMSPAR 0
2507 #endif
2508 static void change_port_settings (struct edgeport_port *edge_port, struct ktermios *old_termios)
2509 {
2510         struct edgeport_serial *edge_serial = usb_get_serial_data(edge_port->port->serial);
2511         struct tty_struct *tty;
2512         int baud;
2513         unsigned cflag;
2514         __u8 mask = 0xff;
2515         __u8 lData;
2516         __u8 lParity;
2517         __u8 lStop;
2518         __u8 rxFlow;
2519         __u8 txFlow;
2520         int status;
2521
2522         dbg("%s - port %d", __FUNCTION__, edge_port->port->number);
2523
2524         if (!edge_port->open &&
2525             !edge_port->openPending) {
2526                 dbg("%s - port not opened", __FUNCTION__);
2527                 return;
2528         }
2529
2530         tty = edge_port->port->tty;
2531         if ((!tty) ||
2532             (!tty->termios)) {
2533                 dbg("%s - no tty structures", __FUNCTION__);
2534                 return;
2535         }
2536
2537         cflag = tty->termios->c_cflag;
2538
2539         switch (cflag & CSIZE) {
2540                 case CS5:   lData = LCR_BITS_5; mask = 0x1f;    dbg("%s - data bits = 5", __FUNCTION__);   break;
2541                 case CS6:   lData = LCR_BITS_6; mask = 0x3f;    dbg("%s - data bits = 6", __FUNCTION__);   break;
2542                 case CS7:   lData = LCR_BITS_7; mask = 0x7f;    dbg("%s - data bits = 7", __FUNCTION__);   break;
2543                 default:
2544                 case CS8:   lData = LCR_BITS_8;                 dbg("%s - data bits = 8", __FUNCTION__);   break;
2545         }
2546
2547         lParity = LCR_PAR_NONE;
2548         if (cflag & PARENB) {
2549                 if (cflag & CMSPAR) {
2550                         if (cflag & PARODD) {
2551                                 lParity = LCR_PAR_MARK;
2552                                 dbg("%s - parity = mark", __FUNCTION__);
2553                         } else {
2554                                 lParity = LCR_PAR_SPACE;
2555                                 dbg("%s - parity = space", __FUNCTION__);
2556                         }
2557                 } else if (cflag & PARODD) {
2558                         lParity = LCR_PAR_ODD;
2559                         dbg("%s - parity = odd", __FUNCTION__);
2560                 } else {
2561                         lParity = LCR_PAR_EVEN;
2562                         dbg("%s - parity = even", __FUNCTION__);
2563                 }
2564         } else {
2565                 dbg("%s - parity = none", __FUNCTION__);
2566         }
2567
2568         if (cflag & CSTOPB) {
2569                 lStop = LCR_STOP_2;
2570                 dbg("%s - stop bits = 2", __FUNCTION__);
2571         } else {
2572                 lStop = LCR_STOP_1;
2573                 dbg("%s - stop bits = 1", __FUNCTION__);
2574         }
2575
2576         /* figure out the flow control settings */
2577         rxFlow = txFlow = 0x00;
2578         if (cflag & CRTSCTS) {
2579                 rxFlow |= IOSP_RX_FLOW_RTS;
2580                 txFlow |= IOSP_TX_FLOW_CTS;
2581                 dbg("%s - RTS/CTS is enabled", __FUNCTION__);
2582         } else {
2583                 dbg("%s - RTS/CTS is disabled", __FUNCTION__);
2584         }
2585
2586         /* if we are implementing XON/XOFF, set the start and stop character in the device */
2587         if (I_IXOFF(tty) || I_IXON(tty)) {
2588                 unsigned char stop_char  = STOP_CHAR(tty);
2589                 unsigned char start_char = START_CHAR(tty);
2590
2591                 if ((!edge_serial->is_epic) ||
2592                     ((edge_serial->is_epic) &&
2593                      (edge_serial->epic_descriptor.Supports.IOSPSetXChar))) {
2594                         send_iosp_ext_cmd(edge_port, IOSP_CMD_SET_XON_CHAR, start_char);
2595                         send_iosp_ext_cmd(edge_port, IOSP_CMD_SET_XOFF_CHAR, stop_char);
2596                 }
2597
2598                 /* if we are implementing INBOUND XON/XOFF */
2599                 if (I_IXOFF(tty)) {
2600                         rxFlow |= IOSP_RX_FLOW_XON_XOFF;
2601                         dbg("%s - INBOUND XON/XOFF is enabled, XON = %2x, XOFF = %2x", __FUNCTION__, start_char, stop_char);
2602                 } else {
2603                         dbg("%s - INBOUND XON/XOFF is disabled", __FUNCTION__);
2604                 }
2605
2606                 /* if we are implementing OUTBOUND XON/XOFF */
2607                 if (I_IXON(tty)) {
2608                         txFlow |= IOSP_TX_FLOW_XON_XOFF;
2609                         dbg("%s - OUTBOUND XON/XOFF is enabled, XON = %2x, XOFF = %2x", __FUNCTION__, start_char, stop_char);
2610                 } else {
2611                         dbg("%s - OUTBOUND XON/XOFF is disabled", __FUNCTION__);
2612                 }
2613         }
2614
2615         /* Set flow control to the configured value */
2616         if ((!edge_serial->is_epic) ||
2617             ((edge_serial->is_epic) &&
2618              (edge_serial->epic_descriptor.Supports.IOSPSetRxFlow)))
2619                 send_iosp_ext_cmd(edge_port, IOSP_CMD_SET_RX_FLOW, rxFlow);
2620         if ((!edge_serial->is_epic) ||
2621             ((edge_serial->is_epic) &&
2622              (edge_serial->epic_descriptor.Supports.IOSPSetTxFlow)))
2623                 send_iosp_ext_cmd(edge_port, IOSP_CMD_SET_TX_FLOW, txFlow);
2624
2625
2626         edge_port->shadowLCR &= ~(LCR_BITS_MASK | LCR_STOP_MASK | LCR_PAR_MASK);
2627         edge_port->shadowLCR |= (lData | lParity | lStop);
2628
2629         edge_port->validDataMask = mask;
2630
2631         /* Send the updated LCR value to the EdgePort */
2632         status = send_cmd_write_uart_register(edge_port, LCR, edge_port->shadowLCR);
2633         if (status != 0) {
2634                 return;
2635         }
2636
2637         /* set up the MCR register and send it to the EdgePort */
2638         edge_port->shadowMCR = MCR_MASTER_IE;
2639         if (cflag & CBAUD) {
2640                 edge_port->shadowMCR |= (MCR_DTR | MCR_RTS);
2641         }
2642         status = send_cmd_write_uart_register(edge_port, MCR, edge_port->shadowMCR);
2643         if (status != 0) {
2644                 return;
2645         }
2646
2647         /* Determine divisor based on baud rate */
2648         baud = tty_get_baud_rate(tty);
2649         if (!baud) {
2650                 /* pick a default, any default... */
2651                 baud = 9600;
2652         }
2653
2654         dbg("%s - baud rate = %d", __FUNCTION__, baud);
2655         status = send_cmd_write_baud_rate (edge_port, baud);
2656
2657         return;
2658 }
2659
2660
2661 /****************************************************************************
2662  * unicode_to_ascii
2663  *      Turns a string from Unicode into ASCII.
2664  *      Doesn't do a good job with any characters that are outside the normal
2665  *      ASCII range, but it's only for debugging...
2666  *      NOTE: expects the unicode in LE format
2667  ****************************************************************************/
2668 static void unicode_to_ascii(char *string, int buflen, __le16 *unicode, int unicode_size)
2669 {
2670         int i;
2671
2672         if (buflen <= 0)        /* never happens, but... */
2673                 return;
2674         --buflen;               /* space for nul */
2675
2676         for (i = 0; i < unicode_size; i++) {
2677                 if (i >= buflen)
2678                         break;
2679                 string[i] = (char)(le16_to_cpu(unicode[i]));
2680         }
2681         string[i] = 0x00;
2682 }
2683
2684
2685 /****************************************************************************
2686  * get_manufacturing_desc
2687  *      reads in the manufacturing descriptor and stores it into the serial 
2688  *      structure.
2689  ****************************************************************************/
2690 static void get_manufacturing_desc (struct edgeport_serial *edge_serial)
2691 {
2692         int response;
2693
2694         dbg("getting manufacturer descriptor");
2695
2696         response = rom_read (edge_serial->serial, (EDGE_MANUF_DESC_ADDR & 0xffff0000) >> 16, 
2697                             (__u16)(EDGE_MANUF_DESC_ADDR & 0x0000ffff), EDGE_MANUF_DESC_LEN,
2698                             (__u8 *)(&edge_serial->manuf_descriptor));
2699
2700         if (response < 1) {
2701                 dev_err(&edge_serial->serial->dev->dev, "error in getting manufacturer descriptor\n");
2702         } else {
2703                 char string[30];
2704                 dbg("**Manufacturer Descriptor");
2705                 dbg("  RomSize:        %dK", edge_serial->manuf_descriptor.RomSize);
2706                 dbg("  RamSize:        %dK", edge_serial->manuf_descriptor.RamSize);
2707                 dbg("  CpuRev:         %d", edge_serial->manuf_descriptor.CpuRev);
2708                 dbg("  BoardRev:       %d", edge_serial->manuf_descriptor.BoardRev);
2709                 dbg("  NumPorts:       %d", edge_serial->manuf_descriptor.NumPorts);
2710                 dbg("  DescDate:       %d/%d/%d", edge_serial->manuf_descriptor.DescDate[0], edge_serial->manuf_descriptor.DescDate[1], edge_serial->manuf_descriptor.DescDate[2]+1900);
2711                 unicode_to_ascii(string, sizeof(string),
2712                     edge_serial->manuf_descriptor.SerialNumber,
2713                     edge_serial->manuf_descriptor.SerNumLength/2);
2714                 dbg("  SerialNumber: %s", string);
2715                 unicode_to_ascii(string, sizeof(string),
2716                     edge_serial->manuf_descriptor.AssemblyNumber,
2717                     edge_serial->manuf_descriptor.AssemblyNumLength/2);
2718                 dbg("  AssemblyNumber: %s", string);
2719                 unicode_to_ascii(string, sizeof(string),
2720                     edge_serial->manuf_descriptor.OemAssyNumber,
2721                     edge_serial->manuf_descriptor.OemAssyNumLength/2);
2722                 dbg("  OemAssyNumber:  %s", string);
2723                 dbg("  UartType:       %d", edge_serial->manuf_descriptor.UartType);
2724                 dbg("  IonPid:         %d", edge_serial->manuf_descriptor.IonPid);
2725                 dbg("  IonConfig:      %d", edge_serial->manuf_descriptor.IonConfig);
2726         }
2727 }
2728
2729
2730 /****************************************************************************
2731  * get_boot_desc
2732  *      reads in the bootloader descriptor and stores it into the serial 
2733  *      structure.
2734  ****************************************************************************/
2735 static void get_boot_desc (struct edgeport_serial *edge_serial)
2736 {
2737         int response;
2738
2739         dbg("getting boot descriptor");
2740
2741         response = rom_read (edge_serial->serial, (EDGE_BOOT_DESC_ADDR & 0xffff0000) >> 16, 
2742                             (__u16)(EDGE_BOOT_DESC_ADDR & 0x0000ffff), EDGE_BOOT_DESC_LEN,
2743                             (__u8 *)(&edge_serial->boot_descriptor));
2744
2745         if (response < 1) {
2746                 dev_err(&edge_serial->serial->dev->dev, "error in getting boot descriptor\n");
2747         } else {
2748                 dbg("**Boot Descriptor:");
2749                 dbg("  BootCodeLength: %d", le16_to_cpu(edge_serial->boot_descriptor.BootCodeLength));
2750                 dbg("  MajorVersion:   %d", edge_serial->boot_descriptor.MajorVersion);
2751                 dbg("  MinorVersion:   %d", edge_serial->boot_descriptor.MinorVersion);
2752                 dbg("  BuildNumber:    %d", le16_to_cpu(edge_serial->boot_descriptor.BuildNumber));
2753                 dbg("  Capabilities:   0x%x", le16_to_cpu(edge_serial->boot_descriptor.Capabilities));
2754                 dbg("  UConfig0:       %d", edge_serial->boot_descriptor.UConfig0);
2755                 dbg("  UConfig1:       %d", edge_serial->boot_descriptor.UConfig1);
2756         }
2757 }
2758
2759
2760 /****************************************************************************
2761  * load_application_firmware
2762  *      This is called to load the application firmware to the device
2763  ****************************************************************************/
2764 static void load_application_firmware (struct edgeport_serial *edge_serial)
2765 {
2766         struct edge_firmware_image_record *record;
2767         unsigned char *firmware;
2768         unsigned char *FirmwareImage;
2769         int ImageSize;
2770         int response;
2771
2772
2773         switch (edge_serial->product_info.iDownloadFile) {
2774                 case EDGE_DOWNLOAD_FILE_I930:
2775                         dbg("downloading firmware version (930) %d.%d.%d", 
2776                             OperationalCodeImageVersion_GEN1.MajorVersion, 
2777                             OperationalCodeImageVersion_GEN1.MinorVersion, 
2778                             OperationalCodeImageVersion_GEN1.BuildNumber);
2779                         firmware = &OperationalCodeImage_GEN1[0];
2780                         FirmwareImage = &OperationalCodeImage_GEN1[0];
2781                         ImageSize = sizeof(OperationalCodeImage_GEN1);
2782                         break;
2783
2784                 case EDGE_DOWNLOAD_FILE_80251:
2785                         dbg("downloading firmware version (80251) %d.%d.%d", 
2786                             OperationalCodeImageVersion_GEN2.MajorVersion, 
2787                             OperationalCodeImageVersion_GEN2.MinorVersion, 
2788                             OperationalCodeImageVersion_GEN2.BuildNumber);
2789                         firmware = &OperationalCodeImage_GEN2[0];
2790                         FirmwareImage = &OperationalCodeImage_GEN2[0];
2791                         ImageSize = sizeof(OperationalCodeImage_GEN2);
2792                         break;
2793
2794                 case EDGE_DOWNLOAD_FILE_NONE:
2795                         dbg     ("No download file specified, skipping download\n");
2796                         return;
2797
2798                 default:
2799                         return;
2800         }
2801
2802
2803         for (;;) {
2804                 record = (struct edge_firmware_image_record *)firmware;
2805                 response = sram_write (edge_serial->serial, le16_to_cpu(record->ExtAddr), le16_to_cpu(record->Addr), le16_to_cpu(record->Len), &record->Data[0]);
2806                 if (response < 0) {
2807                         dev_err(&edge_serial->serial->dev->dev, "sram_write failed (%x, %x, %d)\n", le16_to_cpu(record->ExtAddr), le16_to_cpu(record->Addr), le16_to_cpu(record->Len));
2808                         break;
2809                 }
2810                 firmware += sizeof (struct edge_firmware_image_record) + le16_to_cpu(record->Len);
2811                 if (firmware >= &FirmwareImage[ImageSize]) {
2812                         break;
2813                 }
2814         }
2815
2816         dbg("sending exec_dl_code");
2817         response = usb_control_msg (edge_serial->serial->dev, 
2818                                     usb_sndctrlpipe(edge_serial->serial->dev, 0), 
2819                                     USB_REQUEST_ION_EXEC_DL_CODE, 
2820                                     0x40, 0x4000, 0x0001, NULL, 0, 3000);
2821
2822         return;
2823 }
2824
2825
2826 /****************************************************************************
2827  * edge_startup
2828  ****************************************************************************/
2829 static int edge_startup (struct usb_serial *serial)
2830 {
2831         struct edgeport_serial *edge_serial;
2832         struct edgeport_port *edge_port;
2833         struct usb_device *dev;
2834         int i, j;
2835         int response;
2836         bool interrupt_in_found;
2837         bool bulk_in_found;
2838         bool bulk_out_found;
2839         static __u32 descriptor[3] = {  EDGE_COMPATIBILITY_MASK0,
2840                                         EDGE_COMPATIBILITY_MASK1,
2841                                         EDGE_COMPATIBILITY_MASK2 };
2842
2843         dev = serial->dev;
2844
2845         /* create our private serial structure */
2846         edge_serial = kzalloc(sizeof(struct edgeport_serial), GFP_KERNEL);
2847         if (edge_serial == NULL) {
2848                 dev_err(&serial->dev->dev, "%s - Out of memory\n", __FUNCTION__);
2849                 return -ENOMEM;
2850         }
2851         spin_lock_init(&edge_serial->es_lock);
2852         edge_serial->serial = serial;
2853         usb_set_serial_data(serial, edge_serial);
2854
2855         /* get the name for the device from the device */
2856         i = get_string(dev, dev->descriptor.iManufacturer,
2857             &edge_serial->name[0], MAX_NAME_LEN+1);
2858         edge_serial->name[i++] = ' ';
2859         get_string(dev, dev->descriptor.iProduct,
2860             &edge_serial->name[i], MAX_NAME_LEN+2 - i);
2861
2862         dev_info(&serial->dev->dev, "%s detected\n", edge_serial->name);
2863
2864         /* Read the epic descriptor */
2865         if (get_epic_descriptor(edge_serial) <= 0) {
2866                 /* memcpy descriptor to Supports structures */
2867                 memcpy(&edge_serial->epic_descriptor.Supports, descriptor,
2868                        sizeof(struct edge_compatibility_bits));
2869
2870                 /* get the manufacturing descriptor for this device */
2871                 get_manufacturing_desc (edge_serial);
2872
2873                 /* get the boot descriptor */
2874                 get_boot_desc (edge_serial);
2875
2876                 get_product_info(edge_serial);
2877         }
2878
2879         /* set the number of ports from the manufacturing description */
2880         /* serial->num_ports = serial->product_info.NumPorts; */
2881         if ((!edge_serial->is_epic) &&
2882             (edge_serial->product_info.NumPorts != serial->num_ports)) {
2883                 dev_warn(&serial->dev->dev, "Device Reported %d serial ports "
2884                          "vs. core thinking we have %d ports, email "
2885                          "greg@kroah.com this information.\n",
2886                          edge_serial->product_info.NumPorts,
2887                          serial->num_ports);
2888         }
2889
2890         dbg("%s - time 1 %ld", __FUNCTION__, jiffies);
2891
2892         /* If not an EPiC device */
2893         if (!edge_serial->is_epic) {
2894                 /* now load the application firmware into this device */
2895                 load_application_firmware (edge_serial);
2896
2897                 dbg("%s - time 2 %ld", __FUNCTION__, jiffies);
2898
2899                 /* Check current Edgeport EEPROM and update if necessary */
2900                 update_edgeport_E2PROM (edge_serial);
2901
2902                 dbg("%s - time 3 %ld", __FUNCTION__, jiffies);
2903
2904                 /* set the configuration to use #1 */
2905 //              dbg("set_configuration 1");
2906 //              usb_set_configuration (dev, 1);
2907         }
2908
2909         /* we set up the pointers to the endpoints in the edge_open function, 
2910          * as the structures aren't created yet. */
2911
2912         /* set up our port private structures */
2913         for (i = 0; i < serial->num_ports; ++i) {
2914                 edge_port = kmalloc (sizeof(struct edgeport_port), GFP_KERNEL);
2915                 if (edge_port == NULL) {
2916                         dev_err(&serial->dev->dev, "%s - Out of memory\n", __FUNCTION__);
2917                         for (j = 0; j < i; ++j) {
2918                                 kfree (usb_get_serial_port_data(serial->port[j]));
2919                                 usb_set_serial_port_data(serial->port[j],  NULL);
2920                         }
2921                         usb_set_serial_data(serial, NULL);
2922                         kfree(edge_serial);
2923                         return -ENOMEM;
2924                 }
2925                 memset (edge_port, 0, sizeof(struct edgeport_port));
2926                 spin_lock_init(&edge_port->ep_lock);
2927                 edge_port->port = serial->port[i];
2928                 usb_set_serial_port_data(serial->port[i], edge_port);
2929         }
2930
2931         response = 0;
2932
2933         if (edge_serial->is_epic) {
2934                 /* EPIC thing, set up our interrupt polling now and our read urb, so
2935                  * that the device knows it really is connected. */
2936                 interrupt_in_found = bulk_in_found = bulk_out_found = false;
2937                 for (i = 0; i < serial->interface->altsetting[0].desc.bNumEndpoints; ++i) {
2938                         struct usb_endpoint_descriptor *endpoint;
2939                         int buffer_size;
2940
2941                         endpoint = &serial->interface->altsetting[0].endpoint[i].desc;
2942                         buffer_size = le16_to_cpu(endpoint->wMaxPacketSize);
2943                         if (!interrupt_in_found &&
2944                             (usb_endpoint_is_int_in(endpoint))) {
2945                                 /* we found a interrupt in endpoint */
2946                                 dbg("found interrupt in");
2947
2948                                 /* not set up yet, so do it now */
2949                                 edge_serial->interrupt_read_urb = usb_alloc_urb(0, GFP_KERNEL);
2950                                 if (!edge_serial->interrupt_read_urb) {
2951                                         err("out of memory");
2952                                         return -ENOMEM;
2953                                 }
2954                                 edge_serial->interrupt_in_buffer = kmalloc(buffer_size, GFP_KERNEL);
2955                                 if (!edge_serial->interrupt_in_buffer) {
2956                                         err("out of memory");
2957                                         usb_free_urb(edge_serial->interrupt_read_urb);
2958                                         return -ENOMEM;
2959                                 }
2960                                 edge_serial->interrupt_in_endpoint = endpoint->bEndpointAddress;
2961
2962                                 /* set up our interrupt urb */
2963                                 usb_fill_int_urb(edge_serial->interrupt_read_urb,
2964                                                  dev,
2965                                                  usb_rcvintpipe(dev, endpoint->bEndpointAddress),
2966                                                  edge_serial->interrupt_in_buffer,
2967                                                  buffer_size,
2968                                                  edge_interrupt_callback,
2969                                                  edge_serial,
2970                                                  endpoint->bInterval);
2971
2972                                 interrupt_in_found = true;
2973                         }
2974
2975                         if (!bulk_in_found &&
2976                             (usb_endpoint_is_bulk_in(endpoint))) {
2977                                 /* we found a bulk in endpoint */
2978                                 dbg("found bulk in");
2979
2980                                 /* not set up yet, so do it now */
2981                                 edge_serial->read_urb = usb_alloc_urb(0, GFP_KERNEL);
2982                                 if (!edge_serial->read_urb) {
2983                                         err("out of memory");
2984                                         return -ENOMEM;
2985                                 }
2986                                 edge_serial->bulk_in_buffer = kmalloc(buffer_size, GFP_KERNEL);
2987                                 if (!edge_serial->bulk_in_buffer) {
2988                                         err ("out of memory");
2989                                         usb_free_urb(edge_serial->read_urb);
2990                                         return -ENOMEM;
2991                                 }
2992                                 edge_serial->bulk_in_endpoint = endpoint->bEndpointAddress;
2993
2994                                 /* set up our bulk in urb */
2995                                 usb_fill_bulk_urb(edge_serial->read_urb, dev,
2996                                                   usb_rcvbulkpipe(dev, endpoint->bEndpointAddress),
2997                                                   edge_serial->bulk_in_buffer,
2998                                                   endpoint->wMaxPacketSize,
2999                                                   edge_bulk_in_callback,
3000                                                   edge_serial);
3001                                 bulk_in_found = true;
3002                         }
3003
3004                         if (!bulk_out_found &&
3005                             (usb_endpoint_is_bulk_out(endpoint))) {
3006                                 /* we found a bulk out endpoint */
3007                                 dbg("found bulk out");
3008                                 edge_serial->bulk_out_endpoint = endpoint->bEndpointAddress;
3009                                 bulk_out_found = true;
3010                         }
3011                 }
3012
3013                 if (!interrupt_in_found || !bulk_in_found || !bulk_out_found) {
3014                         err ("Error - the proper endpoints were not found!");
3015                         return -ENODEV;
3016                 }
3017
3018                 /* start interrupt read for this edgeport this interrupt will
3019                  * continue as long as the edgeport is connected */
3020                 response = usb_submit_urb(edge_serial->interrupt_read_urb, GFP_KERNEL);
3021                 if (response)
3022                         err("%s - Error %d submitting control urb", __FUNCTION__, response);
3023         }
3024         return response;
3025 }
3026
3027
3028 /****************************************************************************
3029  * edge_shutdown
3030  *      This function is called whenever the device is removed from the usb bus.
3031  ****************************************************************************/
3032 static void edge_shutdown (struct usb_serial *serial)
3033 {
3034         struct edgeport_serial *edge_serial = usb_get_serial_data(serial);
3035         int i;
3036
3037         dbg("%s", __FUNCTION__);
3038
3039         /* stop reads and writes on all ports */
3040         for (i=0; i < serial->num_ports; ++i) {
3041                 kfree (usb_get_serial_port_data(serial->port[i]));
3042                 usb_set_serial_port_data(serial->port[i],  NULL);
3043         }
3044         /* free up our endpoint stuff */
3045         if (edge_serial->is_epic) {
3046                 usb_kill_urb(edge_serial->interrupt_read_urb);
3047                 usb_free_urb(edge_serial->interrupt_read_urb);
3048                 kfree(edge_serial->interrupt_in_buffer);
3049
3050                 usb_kill_urb(edge_serial->read_urb);
3051                 usb_free_urb(edge_serial->read_urb);
3052                 kfree(edge_serial->bulk_in_buffer);
3053         }
3054
3055         kfree(edge_serial);
3056         usb_set_serial_data(serial, NULL);
3057 }
3058
3059
3060 /****************************************************************************
3061  * edgeport_init
3062  *      This is called by the module subsystem, or on startup to initialize us
3063  ****************************************************************************/
3064 static int __init edgeport_init(void)
3065 {
3066         int retval;
3067
3068         retval = usb_serial_register(&edgeport_2port_device);
3069         if (retval)
3070                 goto failed_2port_device_register;
3071         retval = usb_serial_register(&edgeport_4port_device);
3072         if (retval)
3073                 goto failed_4port_device_register;
3074         retval = usb_serial_register(&edgeport_8port_device);
3075         if (retval)
3076                 goto failed_8port_device_register;
3077         retval = usb_serial_register(&epic_device);
3078         if (retval)
3079                 goto failed_epic_device_register;
3080         retval = usb_register(&io_driver);
3081         if (retval) 
3082                 goto failed_usb_register;
3083         atomic_set(&CmdUrbs, 0);
3084         info(DRIVER_DESC " " DRIVER_VERSION);
3085         return 0;
3086
3087 failed_usb_register:
3088         usb_serial_deregister(&epic_device);
3089 failed_epic_device_register:
3090         usb_serial_deregister(&edgeport_8port_device);
3091 failed_8port_device_register:
3092         usb_serial_deregister(&edgeport_4port_device);
3093 failed_4port_device_register:
3094         usb_serial_deregister(&edgeport_2port_device);
3095 failed_2port_device_register:
3096         return retval;
3097 }
3098
3099
3100 /****************************************************************************
3101  * edgeport_exit
3102  *      Called when the driver is about to be unloaded.
3103  ****************************************************************************/
3104 static void __exit edgeport_exit (void)
3105 {
3106         usb_deregister (&io_driver);
3107         usb_serial_deregister (&edgeport_2port_device);
3108         usb_serial_deregister (&edgeport_4port_device);
3109         usb_serial_deregister (&edgeport_8port_device);
3110         usb_serial_deregister (&epic_device);
3111 }
3112
3113 module_init(edgeport_init);
3114 module_exit(edgeport_exit);
3115
3116 /* Module information */
3117 MODULE_AUTHOR( DRIVER_AUTHOR );
3118 MODULE_DESCRIPTION( DRIVER_DESC );
3119 MODULE_LICENSE("GPL");
3120
3121 module_param(debug, bool, S_IRUGO | S_IWUSR);
3122 MODULE_PARM_DESC(debug, "Debug enabled or not");
3123
3124 module_param(low_latency, bool, S_IRUGO | S_IWUSR);
3125 MODULE_PARM_DESC(low_latency, "Low latency enabled or not");