Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/djbw/async_tx
[linux-2.6] / drivers / usb / serial / spcp8x5.c
1 /*
2  * spcp8x5 USB to serial adaptor driver
3  *
4  * Copyright (C) 2006 Linxb (xubin.lin@worldplus.com.cn)
5  * Copyright (C) 2006 S1 Corp.
6  *
7  * Original driver for 2.6.10 pl2303 driver by
8  *   Greg Kroah-Hartman (greg@kroah.com)
9  * Changes for 2.6.20 by Harald Klein <hari@vt100.at>
10  *
11  *      This program is free software; you can redistribute it and/or modify
12  *      it under the terms of the GNU General Public License as published by
13  *      the Free Software Foundation; either version 2 of the License, or
14  *      (at your option) any later version.
15  *
16  *
17  */
18 #include <linux/kernel.h>
19 #include <linux/errno.h>
20 #include <linux/init.h>
21 #include <linux/slab.h>
22 #include <linux/tty.h>
23 #include <linux/tty_driver.h>
24 #include <linux/tty_flip.h>
25 #include <linux/module.h>
26 #include <linux/spinlock.h>
27 #include <linux/usb.h>
28 #include <linux/usb/serial.h>
29
30
31 /* Version Information */
32 #define DRIVER_VERSION  "v0.04"
33 #define DRIVER_DESC     "SPCP8x5 USB to serial adaptor driver"
34
35 static int debug;
36
37 #define SPCP8x5_007_VID         0x04FC
38 #define SPCP8x5_007_PID         0x0201
39 #define SPCP8x5_008_VID         0x04fc
40 #define SPCP8x5_008_PID         0x0235
41 #define SPCP8x5_PHILIPS_VID     0x0471
42 #define SPCP8x5_PHILIPS_PID     0x081e
43 #define SPCP8x5_INTERMATIC_VID  0x04FC
44 #define SPCP8x5_INTERMATIC_PID  0x0204
45 #define SPCP8x5_835_VID         0x04fc
46 #define SPCP8x5_835_PID         0x0231
47
48 static struct usb_device_id id_table [] = {
49         { USB_DEVICE(SPCP8x5_PHILIPS_VID , SPCP8x5_PHILIPS_PID)},
50         { USB_DEVICE(SPCP8x5_INTERMATIC_VID, SPCP8x5_INTERMATIC_PID)},
51         { USB_DEVICE(SPCP8x5_835_VID, SPCP8x5_835_PID)},
52         { USB_DEVICE(SPCP8x5_008_VID, SPCP8x5_008_PID)},
53         { USB_DEVICE(SPCP8x5_007_VID, SPCP8x5_007_PID)},
54         { }                                     /* Terminating entry */
55 };
56 MODULE_DEVICE_TABLE(usb, id_table);
57
58 struct spcp8x5_usb_ctrl_arg {
59         u8      type;
60         u8      cmd;
61         u8      cmd_type;
62         u16     value;
63         u16     index;
64         u16     length;
65 };
66
67 /* wait 30s before close */
68 #define SPCP8x5_CLOSING_WAIT    (30*HZ)
69
70 #define SPCP8x5_BUF_SIZE        1024
71
72
73 /* spcp8x5 spec register define */
74 #define MCR_CONTROL_LINE_RTS            0x02
75 #define MCR_CONTROL_LINE_DTR            0x01
76 #define MCR_DTR                         0x01
77 #define MCR_RTS                         0x02
78
79 #define MSR_STATUS_LINE_DCD             0x80
80 #define MSR_STATUS_LINE_RI              0x40
81 #define MSR_STATUS_LINE_DSR             0x20
82 #define MSR_STATUS_LINE_CTS             0x10
83
84 /* verdor command here , we should define myself */
85 #define SET_DEFAULT                     0x40
86 #define SET_DEFAULT_TYPE                0x20
87
88 #define SET_UART_FORMAT                 0x40
89 #define SET_UART_FORMAT_TYPE            0x21
90 #define SET_UART_FORMAT_SIZE_5          0x00
91 #define SET_UART_FORMAT_SIZE_6          0x01
92 #define SET_UART_FORMAT_SIZE_7          0x02
93 #define SET_UART_FORMAT_SIZE_8          0x03
94 #define SET_UART_FORMAT_STOP_1          0x00
95 #define SET_UART_FORMAT_STOP_2          0x04
96 #define SET_UART_FORMAT_PAR_NONE        0x00
97 #define SET_UART_FORMAT_PAR_ODD         0x10
98 #define SET_UART_FORMAT_PAR_EVEN        0x30
99 #define SET_UART_FORMAT_PAR_MASK        0xD0
100 #define SET_UART_FORMAT_PAR_SPACE       0x90
101
102 #define GET_UART_STATUS_TYPE            0xc0
103 #define GET_UART_STATUS                 0x22
104 #define GET_UART_STATUS_MSR             0x06
105
106 #define SET_UART_STATUS                 0x40
107 #define SET_UART_STATUS_TYPE            0x23
108 #define SET_UART_STATUS_MCR             0x0004
109 #define SET_UART_STATUS_MCR_DTR         0x01
110 #define SET_UART_STATUS_MCR_RTS         0x02
111 #define SET_UART_STATUS_MCR_LOOP        0x10
112
113 #define SET_WORKING_MODE                0x40
114 #define SET_WORKING_MODE_TYPE           0x24
115 #define SET_WORKING_MODE_U2C            0x00
116 #define SET_WORKING_MODE_RS485          0x01
117 #define SET_WORKING_MODE_PDMA           0x02
118 #define SET_WORKING_MODE_SPP            0x03
119
120 #define SET_FLOWCTL_CHAR                0x40
121 #define SET_FLOWCTL_CHAR_TYPE           0x25
122
123 #define GET_VERSION                     0xc0
124 #define GET_VERSION_TYPE                0x26
125
126 #define SET_REGISTER                    0x40
127 #define SET_REGISTER_TYPE               0x27
128
129 #define GET_REGISTER                    0xc0
130 #define GET_REGISTER_TYPE               0x28
131
132 #define SET_RAM                         0x40
133 #define SET_RAM_TYPE                    0x31
134
135 #define GET_RAM                         0xc0
136 #define GET_RAM_TYPE                    0x32
137
138 /* how come ??? */
139 #define UART_STATE                      0x08
140 #define UART_STATE_TRANSIENT_MASK       0x74
141 #define UART_DCD                        0x01
142 #define UART_DSR                        0x02
143 #define UART_BREAK_ERROR                0x04
144 #define UART_RING                       0x08
145 #define UART_FRAME_ERROR                0x10
146 #define UART_PARITY_ERROR               0x20
147 #define UART_OVERRUN_ERROR              0x40
148 #define UART_CTS                        0x80
149
150 enum spcp8x5_type {
151         SPCP825_007_TYPE,
152         SPCP825_008_TYPE,
153         SPCP825_PHILIP_TYPE,
154         SPCP825_INTERMATIC_TYPE,
155         SPCP835_TYPE,
156 };
157
158 /* 1st in 1st out buffer 4 driver */
159 struct ringbuf {
160         unsigned int    buf_size;
161         char            *buf_buf;
162         char            *buf_get;
163         char            *buf_put;
164 };
165
166 /* alloc the ring buf and alloc the buffer itself */
167 static inline struct ringbuf *alloc_ringbuf(unsigned int size)
168 {
169         struct ringbuf *pb;
170
171         if (size == 0)
172                 return NULL;
173
174         pb = kmalloc(sizeof(*pb), GFP_KERNEL);
175         if (pb == NULL)
176                 return NULL;
177
178         pb->buf_buf = kmalloc(size, GFP_KERNEL);
179         if (pb->buf_buf == NULL) {
180                 kfree(pb);
181                 return NULL;
182         }
183
184         pb->buf_size = size;
185         pb->buf_get = pb->buf_put = pb->buf_buf;
186
187         return pb;
188 }
189
190 /* free the ring buf and the buffer itself */
191 static inline void free_ringbuf(struct ringbuf *pb)
192 {
193         if (pb != NULL) {
194                 kfree(pb->buf_buf);
195                 kfree(pb);
196         }
197 }
198
199 /* clear pipo , juest repoint the pointer here */
200 static inline void clear_ringbuf(struct ringbuf *pb)
201 {
202         if (pb != NULL)
203                 pb->buf_get = pb->buf_put;
204 }
205
206 /* get the number of data in the pipo */
207 static inline unsigned int ringbuf_avail_data(struct ringbuf *pb)
208 {
209         if (pb == NULL)
210                 return 0;
211         return (pb->buf_size + pb->buf_put - pb->buf_get) % pb->buf_size;
212 }
213
214 /* get the number of space in the pipo */
215 static inline unsigned int ringbuf_avail_space(struct ringbuf *pb)
216 {
217         if (pb == NULL)
218                 return 0;
219         return (pb->buf_size + pb->buf_get - pb->buf_put - 1) % pb->buf_size;
220 }
221
222 /* put count data into pipo */
223 static unsigned int put_ringbuf(struct ringbuf *pb, const char *buf,
224                                 unsigned int count)
225 {
226         unsigned int len;
227
228         if (pb == NULL)
229                 return 0;
230
231         len  = ringbuf_avail_space(pb);
232         if (count > len)
233                 count = len;
234
235         if (count == 0)
236                 return 0;
237
238         len = pb->buf_buf + pb->buf_size - pb->buf_put;
239         if (count > len) {
240                 memcpy(pb->buf_put, buf, len);
241                 memcpy(pb->buf_buf, buf+len, count - len);
242                 pb->buf_put = pb->buf_buf + count - len;
243         } else {
244                 memcpy(pb->buf_put, buf, count);
245                 if (count < len)
246                         pb->buf_put += count;
247                 else /* count == len */
248                         pb->buf_put = pb->buf_buf;
249         }
250         return count;
251 }
252
253 /* get count data from pipo */
254 static unsigned int get_ringbuf(struct ringbuf *pb, char *buf,
255                                 unsigned int count)
256 {
257         unsigned int len;
258
259         if (pb == NULL || buf == NULL)
260                 return 0;
261
262         len = ringbuf_avail_data(pb);
263         if (count > len)
264                 count = len;
265
266         if (count == 0)
267                 return 0;
268
269         len = pb->buf_buf + pb->buf_size - pb->buf_get;
270         if (count > len) {
271                 memcpy(buf, pb->buf_get, len);
272                 memcpy(buf+len, pb->buf_buf, count - len);
273                 pb->buf_get = pb->buf_buf + count - len;
274         } else {
275                 memcpy(buf, pb->buf_get, count);
276                 if (count < len)
277                         pb->buf_get += count;
278                 else /* count == len */
279                         pb->buf_get = pb->buf_buf;
280         }
281
282         return count;
283 }
284
285 static struct usb_driver spcp8x5_driver = {
286         .name =                 "spcp8x5",
287         .probe =                usb_serial_probe,
288         .disconnect =           usb_serial_disconnect,
289         .id_table =             id_table,
290         .no_dynamic_id =        1,
291 };
292
293
294 struct spcp8x5_private {
295         spinlock_t      lock;
296         struct ringbuf  *buf;
297         int             write_urb_in_use;
298         enum spcp8x5_type       type;
299         wait_queue_head_t       delta_msr_wait;
300         u8                      line_control;
301         u8                      line_status;
302         u8                      termios_initialized;
303 };
304
305 /* desc : when device plug in,this function would be called.
306  * thanks to usb_serial subsystem,then do almost every things for us. And what
307  * we should do just alloc the buffer */
308 static int spcp8x5_startup(struct usb_serial *serial)
309 {
310         struct spcp8x5_private *priv;
311         int i;
312         enum spcp8x5_type type = SPCP825_007_TYPE;
313         u16 product = le16_to_cpu(serial->dev->descriptor.idProduct);
314
315         if (product == 0x0201)
316                 type = SPCP825_007_TYPE;
317         else if (product == 0x0231)
318                 type = SPCP835_TYPE;
319         else if (product == 0x0235)
320                 type = SPCP825_008_TYPE;
321         else if (product == 0x0204)
322                 type = SPCP825_INTERMATIC_TYPE;
323         else if (product == 0x0471 &&
324                  serial->dev->descriptor.idVendor == cpu_to_le16(0x081e))
325                 type = SPCP825_PHILIP_TYPE;
326         dev_dbg(&serial->dev->dev, "device type = %d\n", (int)type);
327
328         for (i = 0; i < serial->num_ports; ++i) {
329                 priv = kzalloc(sizeof(struct spcp8x5_private), GFP_KERNEL);
330                 if (!priv)
331                         goto cleanup;
332
333                 spin_lock_init(&priv->lock);
334                 priv->buf = alloc_ringbuf(SPCP8x5_BUF_SIZE);
335                 if (priv->buf == NULL)
336                         goto cleanup2;
337
338                 init_waitqueue_head(&priv->delta_msr_wait);
339                 priv->type = type;
340                 usb_set_serial_port_data(serial->port[i] , priv);
341
342         }
343
344         return 0;
345
346 cleanup2:
347         kfree(priv);
348 cleanup:
349         for (--i; i >= 0; --i) {
350                 priv = usb_get_serial_port_data(serial->port[i]);
351                 free_ringbuf(priv->buf);
352                 kfree(priv);
353                 usb_set_serial_port_data(serial->port[i] , NULL);
354         }
355         return -ENOMEM;
356 }
357
358 /* call when the device plug out. free all the memory alloced by probe */
359 static void spcp8x5_shutdown(struct usb_serial *serial)
360 {
361         int i;
362         struct spcp8x5_private *priv;
363
364         for (i = 0; i < serial->num_ports; i++) {
365                 priv = usb_get_serial_port_data(serial->port[i]);
366                 if (priv) {
367                         free_ringbuf(priv->buf);
368                         kfree(priv);
369                         usb_set_serial_port_data(serial->port[i] , NULL);
370                 }
371         }
372 }
373
374 /* set the modem control line of the device.
375  * NOTE spcp825-007 not supported this */
376 static int spcp8x5_set_ctrlLine(struct usb_device *dev, u8 value,
377                                 enum spcp8x5_type type)
378 {
379         int retval;
380         u8 mcr = 0 ;
381
382         if (type == SPCP825_007_TYPE)
383                 return -EPERM;
384
385         mcr = (unsigned short)value;
386         retval = usb_control_msg(dev, usb_sndctrlpipe(dev, 0),
387                                  SET_UART_STATUS_TYPE, SET_UART_STATUS,
388                                  mcr, 0x04, NULL, 0, 100);
389         if (retval != 0)
390                 dev_dbg(&dev->dev, "usb_control_msg return %#x\n", retval);
391         return retval;
392 }
393
394 /* get the modem status register of the device
395  * NOTE spcp825-007 not supported this */
396 static int spcp8x5_get_msr(struct usb_device *dev, u8 *status,
397                            enum spcp8x5_type type)
398 {
399         u8 *status_buffer;
400         int ret;
401
402         /* I return Permited not support here but seem inval device
403          * is more fix */
404         if (type == SPCP825_007_TYPE)
405                 return -EPERM;
406         if (status == NULL)
407                 return -EINVAL;
408
409         status_buffer = kmalloc(1, GFP_KERNEL);
410         if (!status_buffer)
411                 return -ENOMEM;
412         status_buffer[0] = status[0];
413
414         ret = usb_control_msg(dev, usb_rcvctrlpipe(dev, 0),
415                               GET_UART_STATUS, GET_UART_STATUS_TYPE,
416                               0, GET_UART_STATUS_MSR, status_buffer, 1, 100);
417         if (ret < 0)
418                 dev_dbg(&dev->dev, "Get MSR = 0x%p failed (error = %d)",
419                         status_buffer, ret);
420
421         dev_dbg(&dev->dev, "0xc0:0x22:0:6  %d - 0x%p ", ret, status_buffer);
422         status[0] = status_buffer[0];
423         kfree(status_buffer);
424
425         return ret;
426 }
427
428 /* select the work mode.
429  * NOTE this function not supported by spcp825-007 */
430 static void spcp8x5_set_workMode(struct usb_device *dev, u16 value,
431                                  u16 index, enum spcp8x5_type type)
432 {
433         int ret;
434
435         /* I return Permited not support here but seem inval device
436          * is more fix */
437         if (type == SPCP825_007_TYPE)
438                 return;
439
440         ret = usb_control_msg(dev, usb_sndctrlpipe(dev, 0),
441                               SET_WORKING_MODE_TYPE, SET_WORKING_MODE,
442                               value, index, NULL, 0, 100);
443         dev_dbg(&dev->dev, "value = %#x , index = %#x\n", value, index);
444         if (ret < 0)
445                 dev_dbg(&dev->dev,
446                         "RTSCTS usb_control_msg(enable flowctrl) = %d\n", ret);
447 }
448
449 /* close the serial port. We should wait for data sending to device 1st and
450  * then kill all urb. */
451 static void spcp8x5_close(struct tty_struct *tty,
452                         struct usb_serial_port *port, struct file *filp)
453 {
454         struct spcp8x5_private *priv = usb_get_serial_port_data(port);
455         unsigned long flags;
456         unsigned int c_cflag;
457         int bps;
458         long timeout;
459         wait_queue_t wait;
460         int result;
461
462         dbg("%s - port %d", __func__, port->number);
463
464         /* wait for data to drain from the buffer */
465         spin_lock_irqsave(&priv->lock, flags);
466         timeout = SPCP8x5_CLOSING_WAIT;
467         init_waitqueue_entry(&wait, current);
468         add_wait_queue(&tty->write_wait, &wait);
469         for (;;) {
470                 set_current_state(TASK_INTERRUPTIBLE);
471                 if (ringbuf_avail_data(priv->buf) == 0 ||
472                     timeout == 0 || signal_pending(current))
473                         break;
474                 spin_unlock_irqrestore(&priv->lock, flags);
475                 timeout = schedule_timeout(timeout);
476                 spin_lock_irqsave(&priv->lock, flags);
477         }
478         set_current_state(TASK_RUNNING);
479         remove_wait_queue(&tty->write_wait, &wait);
480
481         /* clear out any remaining data in the buffer */
482         clear_ringbuf(priv->buf);
483         spin_unlock_irqrestore(&priv->lock, flags);
484
485         /* wait for characters to drain from the device (this is long enough
486          * for the entire all byte spcp8x5 hardware buffer to drain with no
487          * flow control for data rates of 1200 bps or more, for lower rates we
488          * should really know how much data is in the buffer to compute a delay
489          * that is not unnecessarily long) */
490         bps = tty_get_baud_rate(tty);
491         if (bps > 1200)
492                 timeout = max((HZ*2560) / bps, HZ/10);
493         else
494                 timeout = 2*HZ;
495         set_current_state(TASK_INTERRUPTIBLE);
496         schedule_timeout(timeout);
497
498         /* clear control lines */
499         if (tty) {
500                 c_cflag = tty->termios->c_cflag;
501                 if (c_cflag & HUPCL) {
502                         spin_lock_irqsave(&priv->lock, flags);
503                         priv->line_control = 0;
504                         spin_unlock_irqrestore(&priv->lock, flags);
505                         spcp8x5_set_ctrlLine(port->serial->dev, 0 , priv->type);
506                 }
507         }
508
509         /* kill urb */
510         if (port->write_urb != NULL) {
511                 result = usb_unlink_urb(port->write_urb);
512                 if (result)
513                         dev_dbg(&port->dev,
514                                 "usb_unlink_urb(write_urb) = %d\n", result);
515         }
516         result = usb_unlink_urb(port->read_urb);
517         if (result)
518                 dev_dbg(&port->dev, "usb_unlink_urb(read_urb) = %d\n", result);
519 }
520
521 /* set the serial param for transfer. we should check if we really need to
522  * transfer. if we set flow control we should do this too. */
523 static void spcp8x5_set_termios(struct tty_struct *tty,
524                 struct usb_serial_port *port, struct ktermios *old_termios)
525 {
526         struct usb_serial *serial = port->serial;
527         struct spcp8x5_private *priv = usb_get_serial_port_data(port);
528         unsigned long flags;
529         unsigned int cflag = tty->termios->c_cflag;
530         unsigned int old_cflag = old_termios->c_cflag;
531         unsigned short uartdata;
532         unsigned char buf[2] = {0, 0};
533         int baud;
534         int i;
535         u8 control;
536
537         /* for the 1st time call this function */
538         spin_lock_irqsave(&priv->lock, flags);
539         if (!priv->termios_initialized) {
540                 *(tty->termios) = tty_std_termios;
541                 tty->termios->c_cflag = B115200 | CS8 | CREAD | HUPCL | CLOCAL;
542                 tty->termios->c_ispeed = 115200;
543                 tty->termios->c_ospeed = 115200;
544                 priv->termios_initialized = 1;
545         }
546         spin_unlock_irqrestore(&priv->lock, flags);
547
548         /* check that they really want us to change something */
549         if (!tty_termios_hw_change(tty->termios, old_termios))
550                 return;
551
552         /* set DTR/RTS active */
553         spin_lock_irqsave(&priv->lock, flags);
554         control = priv->line_control;
555         if ((old_cflag & CBAUD) == B0) {
556                 priv->line_control |= MCR_DTR;
557                 if (!(old_cflag & CRTSCTS))
558                         priv->line_control |= MCR_RTS;
559         }
560         if (control != priv->line_control) {
561                 control = priv->line_control;
562                 spin_unlock_irqrestore(&priv->lock, flags);
563                 spcp8x5_set_ctrlLine(serial->dev, control , priv->type);
564         } else {
565                 spin_unlock_irqrestore(&priv->lock, flags);
566         }
567
568         /* Set Baud Rate */
569         baud = tty_get_baud_rate(tty);;
570         switch (baud) {
571         case 300:       buf[0] = 0x00;  break;
572         case 600:       buf[0] = 0x01;  break;
573         case 1200:      buf[0] = 0x02;  break;
574         case 2400:      buf[0] = 0x03;  break;
575         case 4800:      buf[0] = 0x04;  break;
576         case 9600:      buf[0] = 0x05;  break;
577         case 19200:     buf[0] = 0x07;  break;
578         case 38400:     buf[0] = 0x09;  break;
579         case 57600:     buf[0] = 0x0a;  break;
580         case 115200:    buf[0] = 0x0b;  break;
581         case 230400:    buf[0] = 0x0c;  break;
582         case 460800:    buf[0] = 0x0d;  break;
583         case 921600:    buf[0] = 0x0e;  break;
584 /*      case 1200000:   buf[0] = 0x0f;  break; */
585 /*      case 2400000:   buf[0] = 0x10;  break; */
586         case 3000000:   buf[0] = 0x11;  break;
587 /*      case 6000000:   buf[0] = 0x12;  break; */
588         case 0:
589         case 1000000:
590                         buf[0] = 0x0b;  break;
591         default:
592                 err("spcp825 driver does not support the baudrate "
593                     "requested, using default of 9600.");
594         }
595
596         /* Set Data Length : 00:5bit, 01:6bit, 10:7bit, 11:8bit */
597         if (cflag & CSIZE) {
598                 switch (cflag & CSIZE) {
599                 case CS5:
600                         buf[1] |= SET_UART_FORMAT_SIZE_5;
601                         break;
602                 case CS6:
603                         buf[1] |= SET_UART_FORMAT_SIZE_6;
604                         break;
605                 case CS7:
606                         buf[1] |= SET_UART_FORMAT_SIZE_7;
607                         break;
608                 default:
609                 case CS8:
610                         buf[1] |= SET_UART_FORMAT_SIZE_8;
611                         break;
612                 }
613         }
614
615         /* Set Stop bit2 : 0:1bit 1:2bit */
616         buf[1] |= (cflag & CSTOPB) ? SET_UART_FORMAT_STOP_2 :
617                                      SET_UART_FORMAT_STOP_1;
618
619         /* Set Parity bit3-4 01:Odd 11:Even */
620         if (cflag & PARENB) {
621                 buf[1] |= (cflag & PARODD) ?
622                 SET_UART_FORMAT_PAR_ODD : SET_UART_FORMAT_PAR_EVEN ;
623         } else
624                 buf[1] |= SET_UART_FORMAT_PAR_NONE;
625
626         uartdata = buf[0] | buf[1]<<8;
627
628         i = usb_control_msg(serial->dev, usb_sndctrlpipe(serial->dev, 0),
629                             SET_UART_FORMAT_TYPE, SET_UART_FORMAT,
630                             uartdata, 0, NULL, 0, 100);
631         if (i < 0)
632                 err("Set UART format %#x failed (error = %d)", uartdata, i);
633         dbg("0x21:0x40:0:0  %d\n", i);
634
635         if (cflag & CRTSCTS) {
636                 /* enable hardware flow control */
637                 spcp8x5_set_workMode(serial->dev, 0x000a,
638                                      SET_WORKING_MODE_U2C, priv->type);
639         }
640         return;
641 }
642
643 /* open the serial port. do some usb system call. set termios and get the line
644  * status of the device. then submit the read urb */
645 static int spcp8x5_open(struct tty_struct *tty,
646                         struct usb_serial_port *port, struct file *filp)
647 {
648         struct ktermios tmp_termios;
649         struct usb_serial *serial = port->serial;
650         struct spcp8x5_private *priv = usb_get_serial_port_data(port);
651         int ret;
652         unsigned long flags;
653         u8 status = 0x30;
654         /* status 0x30 means DSR and CTS = 1 other CDC RI and delta = 0 */
655
656         dbg("%s -  port %d", __func__, port->number);
657
658         usb_clear_halt(serial->dev, port->write_urb->pipe);
659         usb_clear_halt(serial->dev, port->read_urb->pipe);
660
661         ret = usb_control_msg(serial->dev, usb_sndctrlpipe(serial->dev, 0),
662                               0x09, 0x00,
663                               0x01, 0x00, NULL, 0x00, 100);
664         if (ret)
665                 return ret;
666
667         spin_lock_irqsave(&priv->lock, flags);
668         if (tty && (tty->termios->c_cflag & CBAUD))
669                 priv->line_control = MCR_DTR | MCR_RTS;
670         else
671                 priv->line_control = 0;
672         spin_unlock_irqrestore(&priv->lock, flags);
673
674         spcp8x5_set_ctrlLine(serial->dev, priv->line_control , priv->type);
675
676         /* Setup termios */
677         if (tty)
678                 spcp8x5_set_termios(tty, port, &tmp_termios);
679
680         spcp8x5_get_msr(serial->dev, &status, priv->type);
681
682         /* may be we should update uart status here but now we did not do */
683         spin_lock_irqsave(&priv->lock, flags);
684         priv->line_status = status & 0xf0 ;
685         spin_unlock_irqrestore(&priv->lock, flags);
686
687         /* FIXME: need to assert RTS and DTR if CRTSCTS off */
688
689         dbg("%s - submitting read urb", __func__);
690         port->read_urb->dev = serial->dev;
691         ret = usb_submit_urb(port->read_urb, GFP_KERNEL);
692         if (ret) {
693                 spcp8x5_close(tty, port, NULL);
694                 return -EPROTO;
695         }
696         return 0;
697 }
698
699 /* bulk read call back function. check the status of the urb. if transfer
700  * failed return. then update the status and the tty send data to tty subsys.
701  * submit urb again.
702  */
703 static void spcp8x5_read_bulk_callback(struct urb *urb)
704 {
705         struct usb_serial_port *port = urb->context;
706         struct spcp8x5_private *priv = usb_get_serial_port_data(port);
707         struct tty_struct *tty;
708         unsigned char *data = urb->transfer_buffer;
709         unsigned long flags;
710         int i;
711         int result;
712         u8 status = 0;
713         char tty_flag;
714
715         dev_dbg(&port->dev, "start, urb->status = %d, "
716                 "urb->actual_length = %d\n,", urb->status, urb->actual_length);
717
718         /* check the urb status */
719         if (urb->status) {
720                 if (!port->port.count)
721                         return;
722                 if (urb->status == -EPROTO) {
723                         /* spcp8x5 mysteriously fails with -EPROTO */
724                         /* reschedule the read */
725                         urb->status = 0;
726                         urb->dev = port->serial->dev;
727                         result = usb_submit_urb(urb , GFP_ATOMIC);
728                         if (result)
729                                 dev_dbg(&port->dev,
730                                         "failed submitting read urb %d\n",
731                                         result);
732                         return;
733                 }
734                 dev_dbg(&port->dev, "unable to handle the error, exiting.\n");
735                 return;
736         }
737
738         /* get tty_flag from status */
739         tty_flag = TTY_NORMAL;
740
741         spin_lock_irqsave(&priv->lock, flags);
742         status = priv->line_status;
743         priv->line_status &= ~UART_STATE_TRANSIENT_MASK;
744         spin_unlock_irqrestore(&priv->lock, flags);
745         /* wake up the wait for termios */
746         wake_up_interruptible(&priv->delta_msr_wait);
747
748         /* break takes precedence over parity, which takes precedence over
749          * framing errors */
750         if (status & UART_BREAK_ERROR)
751                 tty_flag = TTY_BREAK;
752         else if (status & UART_PARITY_ERROR)
753                 tty_flag = TTY_PARITY;
754         else if (status & UART_FRAME_ERROR)
755                 tty_flag = TTY_FRAME;
756         dev_dbg(&port->dev, "tty_flag = %d\n", tty_flag);
757
758         tty = port->port.tty;
759         if (tty && urb->actual_length) {
760                 tty_buffer_request_room(tty, urb->actual_length + 1);
761                 /* overrun is special, not associated with a char */
762                 if (status & UART_OVERRUN_ERROR)
763                         tty_insert_flip_char(tty, 0, TTY_OVERRUN);
764                 for (i = 0; i < urb->actual_length; ++i)
765                         tty_insert_flip_char(tty, data[i], tty_flag);
766                 tty_flip_buffer_push(tty);
767         }
768
769         /* Schedule the next read _if_ we are still open */
770         if (port->port.count) {
771                 urb->dev = port->serial->dev;
772                 result = usb_submit_urb(urb , GFP_ATOMIC);
773                 if (result)
774                         dev_dbg(&port->dev, "failed submitting read urb %d\n",
775                                 result);
776         }
777
778         return;
779 }
780
781 /* get data from ring buffer and then write to usb bus */
782 static void spcp8x5_send(struct usb_serial_port *port)
783 {
784         int count, result;
785         struct spcp8x5_private *priv = usb_get_serial_port_data(port);
786         unsigned long flags;
787
788         spin_lock_irqsave(&priv->lock, flags);
789
790         if (priv->write_urb_in_use) {
791                 dev_dbg(&port->dev, "write urb still used\n");
792                 spin_unlock_irqrestore(&priv->lock, flags);
793                 return;
794         }
795
796         /* send the 1st urb for writting */
797         memset(port->write_urb->transfer_buffer , 0x00 , port->bulk_out_size);
798         count = get_ringbuf(priv->buf, port->write_urb->transfer_buffer,
799                 port->bulk_out_size);
800
801         if (count == 0) {
802                 spin_unlock_irqrestore(&priv->lock, flags);
803                 return;
804         }
805
806         /* update the urb status */
807         priv->write_urb_in_use = 1;
808
809         spin_unlock_irqrestore(&priv->lock, flags);
810
811         port->write_urb->transfer_buffer_length = count;
812         port->write_urb->dev = port->serial->dev;
813
814         result = usb_submit_urb(port->write_urb, GFP_ATOMIC);
815         if (result) {
816                 dev_dbg(&port->dev, "failed submitting write urb, error %d\n",
817                         result);
818                 priv->write_urb_in_use = 0;
819                 /* TODO: reschedule spcp8x5_send */
820         }
821
822
823         schedule_work(&port->work);
824 }
825
826 /* this is the call back function for write urb. NOTE we should not sleep in
827  * this routine. check the urb return code and then submit the write urb again
828  * to hold the write loop */
829 static void spcp8x5_write_bulk_callback(struct urb *urb)
830 {
831         struct usb_serial_port *port = urb->context;
832         struct spcp8x5_private *priv = usb_get_serial_port_data(port);
833         int result;
834
835         switch (urb->status) {
836         case 0:
837                 /* success */
838                 break;
839         case -ECONNRESET:
840         case -ENOENT:
841         case -ESHUTDOWN:
842                 /* this urb is terminated, clean up */
843                 dev_dbg(&port->dev, "urb shutting down with status: %d\n",
844                         urb->status);
845                 priv->write_urb_in_use = 0;
846                 return;
847         default:
848                 /* error in the urb, so we have to resubmit it */
849                 dbg("%s - Overflow in write", __func__);
850                 dbg("%s - nonzero write bulk status received: %d",
851                         __func__, urb->status);
852                 port->write_urb->transfer_buffer_length = 1;
853                 port->write_urb->dev = port->serial->dev;
854                 result = usb_submit_urb(port->write_urb, GFP_ATOMIC);
855                 if (result)
856                         dev_dbg(&port->dev,
857                                 "failed resubmitting write urb %d\n", result);
858                 else
859                         return;
860         }
861
862         priv->write_urb_in_use = 0;
863
864         /* send any buffered data */
865         spcp8x5_send(port);
866 }
867
868 /* write data to ring buffer. and then start the write transfer */
869 static int spcp8x5_write(struct tty_struct *tty, struct usb_serial_port *port,
870                          const unsigned char *buf, int count)
871 {
872         struct spcp8x5_private *priv = usb_get_serial_port_data(port);
873         unsigned long flags;
874
875         dev_dbg(&port->dev, "%d bytes\n", count);
876
877         if (!count)
878                 return count;
879
880         spin_lock_irqsave(&priv->lock, flags);
881         count = put_ringbuf(priv->buf, buf, count);
882         spin_unlock_irqrestore(&priv->lock, flags);
883
884         spcp8x5_send(port);
885
886         return count;
887 }
888
889 static int spcp8x5_wait_modem_info(struct usb_serial_port *port,
890                                    unsigned int arg)
891 {
892         struct spcp8x5_private *priv = usb_get_serial_port_data(port);
893         unsigned long flags;
894         unsigned int prevstatus;
895         unsigned int status;
896         unsigned int changed;
897
898         spin_lock_irqsave(&priv->lock, flags);
899         prevstatus = priv->line_status;
900         spin_unlock_irqrestore(&priv->lock, flags);
901
902         while (1) {
903                 /* wake up in bulk read */
904                 interruptible_sleep_on(&priv->delta_msr_wait);
905
906                 /* see if a signal did it */
907                 if (signal_pending(current))
908                         return -ERESTARTSYS;
909
910                 spin_lock_irqsave(&priv->lock, flags);
911                 status = priv->line_status;
912                 spin_unlock_irqrestore(&priv->lock, flags);
913
914                 changed = prevstatus^status;
915
916                 if (((arg & TIOCM_RNG) && (changed & MSR_STATUS_LINE_RI)) ||
917                     ((arg & TIOCM_DSR) && (changed & MSR_STATUS_LINE_DSR)) ||
918                     ((arg & TIOCM_CD)  && (changed & MSR_STATUS_LINE_DCD)) ||
919                     ((arg & TIOCM_CTS) && (changed & MSR_STATUS_LINE_CTS)))
920                         return 0;
921
922                 prevstatus = status;
923         }
924         /* NOTREACHED */
925         return 0;
926 }
927
928 static int spcp8x5_ioctl(struct tty_struct *tty, struct file *file,
929                          unsigned int cmd, unsigned long arg)
930 {
931         struct usb_serial_port *port = tty->driver_data;
932         dbg("%s (%d) cmd = 0x%04x", __func__, port->number, cmd);
933
934         switch (cmd) {
935         case TIOCMIWAIT:
936                 dbg("%s (%d) TIOCMIWAIT", __func__,  port->number);
937                 return spcp8x5_wait_modem_info(port, arg);
938
939         default:
940                 dbg("%s not supported = 0x%04x", __func__, cmd);
941                 break;
942         }
943
944         return -ENOIOCTLCMD;
945 }
946
947 static int spcp8x5_tiocmset(struct tty_struct *tty, struct file *file,
948                             unsigned int set, unsigned int clear)
949 {
950         struct usb_serial_port *port = tty->driver_data;
951         struct spcp8x5_private *priv = usb_get_serial_port_data(port);
952         unsigned long flags;
953         u8 control;
954
955         spin_lock_irqsave(&priv->lock, flags);
956         if (set & TIOCM_RTS)
957                 priv->line_control |= MCR_RTS;
958         if (set & TIOCM_DTR)
959                 priv->line_control |= MCR_DTR;
960         if (clear & TIOCM_RTS)
961                 priv->line_control &= ~MCR_RTS;
962         if (clear & TIOCM_DTR)
963                 priv->line_control &= ~MCR_DTR;
964         control = priv->line_control;
965         spin_unlock_irqrestore(&priv->lock, flags);
966
967         return spcp8x5_set_ctrlLine(port->serial->dev, control , priv->type);
968 }
969
970 static int spcp8x5_tiocmget(struct tty_struct *tty, struct file *file)
971 {
972         struct usb_serial_port *port = tty->driver_data;
973         struct spcp8x5_private *priv = usb_get_serial_port_data(port);
974         unsigned long flags;
975         unsigned int mcr;
976         unsigned int status;
977         unsigned int result;
978
979         spin_lock_irqsave(&priv->lock, flags);
980         mcr = priv->line_control;
981         status = priv->line_status;
982         spin_unlock_irqrestore(&priv->lock, flags);
983
984         result = ((mcr & MCR_DTR)                       ? TIOCM_DTR : 0)
985                   | ((mcr & MCR_RTS)                    ? TIOCM_RTS : 0)
986                   | ((status & MSR_STATUS_LINE_CTS)     ? TIOCM_CTS : 0)
987                   | ((status & MSR_STATUS_LINE_DSR)     ? TIOCM_DSR : 0)
988                   | ((status & MSR_STATUS_LINE_RI)      ? TIOCM_RI  : 0)
989                   | ((status & MSR_STATUS_LINE_DCD)     ? TIOCM_CD  : 0);
990
991         return result;
992 }
993
994 /* get the avail space room in ring buffer */
995 static int spcp8x5_write_room(struct tty_struct *tty)
996 {
997         struct usb_serial_port *port = tty->driver_data;
998         struct spcp8x5_private *priv = usb_get_serial_port_data(port);
999         int room = 0;
1000         unsigned long flags;
1001
1002         spin_lock_irqsave(&priv->lock, flags);
1003         room = ringbuf_avail_space(priv->buf);
1004         spin_unlock_irqrestore(&priv->lock, flags);
1005
1006         return room;
1007 }
1008
1009 /* get the number of avail data in write ring buffer */
1010 static int spcp8x5_chars_in_buffer(struct tty_struct *tty)
1011 {
1012         struct usb_serial_port *port = tty->driver_data;
1013         struct spcp8x5_private *priv = usb_get_serial_port_data(port);
1014         int chars = 0;
1015         unsigned long flags;
1016
1017         spin_lock_irqsave(&priv->lock, flags);
1018         chars = ringbuf_avail_data(priv->buf);
1019         spin_unlock_irqrestore(&priv->lock, flags);
1020
1021         return chars;
1022 }
1023
1024 /* All of the device info needed for the spcp8x5 SIO serial converter */
1025 static struct usb_serial_driver spcp8x5_device = {
1026         .driver = {
1027                 .owner =        THIS_MODULE,
1028                 .name =         "SPCP8x5",
1029         },
1030         .id_table               = id_table,
1031         .num_ports              = 1,
1032         .open                   = spcp8x5_open,
1033         .close                  = spcp8x5_close,
1034         .write                  = spcp8x5_write,
1035         .set_termios            = spcp8x5_set_termios,
1036         .ioctl                  = spcp8x5_ioctl,
1037         .tiocmget               = spcp8x5_tiocmget,
1038         .tiocmset               = spcp8x5_tiocmset,
1039         .write_room             = spcp8x5_write_room,
1040         .read_bulk_callback     = spcp8x5_read_bulk_callback,
1041         .write_bulk_callback    = spcp8x5_write_bulk_callback,
1042         .chars_in_buffer        = spcp8x5_chars_in_buffer,
1043         .attach                 = spcp8x5_startup,
1044         .shutdown               = spcp8x5_shutdown,
1045 };
1046
1047 static int __init spcp8x5_init(void)
1048 {
1049         int retval;
1050         retval = usb_serial_register(&spcp8x5_device);
1051         if (retval)
1052                 goto failed_usb_serial_register;
1053         retval = usb_register(&spcp8x5_driver);
1054         if (retval)
1055                 goto failed_usb_register;
1056         info(DRIVER_DESC " " DRIVER_VERSION);
1057         return 0;
1058 failed_usb_register:
1059         usb_serial_deregister(&spcp8x5_device);
1060 failed_usb_serial_register:
1061         return retval;
1062 }
1063
1064 static void __exit spcp8x5_exit(void)
1065 {
1066         usb_deregister(&spcp8x5_driver);
1067         usb_serial_deregister(&spcp8x5_device);
1068 }
1069
1070 module_init(spcp8x5_init);
1071 module_exit(spcp8x5_exit);
1072
1073 MODULE_DESCRIPTION(DRIVER_DESC);
1074 MODULE_VERSION(DRIVER_VERSION);
1075 MODULE_LICENSE("GPL");
1076
1077 module_param(debug, bool, S_IRUGO | S_IWUSR);
1078 MODULE_PARM_DESC(debug, "Debug enabled or not");