Merge branch 'mv-merge'
[linux-2.6] / drivers / macintosh / adbhid.c
1 /*
2  * drivers/input/adbhid.c
3  *
4  * ADB HID driver for Power Macintosh computers.
5  *
6  * Adapted from drivers/macintosh/mac_keyb.c by Franz Sirl.
7  * drivers/macintosh/mac_keyb.c was Copyright (C) 1996 Paul Mackerras
8  * with considerable contributions from Ben Herrenschmidt and others.
9  *
10  * Copyright (C) 2000 Franz Sirl.
11  *
12  * Adapted to ADB changes and support for more devices by
13  * Benjamin Herrenschmidt. Adapted from code in MkLinux
14  * and reworked.
15  * 
16  * Supported devices:
17  *
18  * - Standard 1 button mouse
19  * - All standard Apple Extended protocol (handler ID 4)
20  * - mouseman and trackman mice & trackballs 
21  * - PowerBook Trackpad (default setup: enable tapping)
22  * - MicroSpeed mouse & trackball (needs testing)
23  * - CH Products Trackball Pro (needs testing)
24  * - Contour Design (Contour Mouse)
25  * - Hunter digital (NoHandsMouse)
26  * - Kensignton TurboMouse 5 (needs testing)
27  * - Mouse Systems A3 mice and trackballs <aidan@kublai.com>
28  * - MacAlly 2-buttons mouse (needs testing) <pochini@denise.shiny.it>
29  *
30  * To do:
31  *
32  * Improve Kensington support.
33  * Split mouse/kbd
34  * Move to syfs
35  */
36
37 #include <linux/config.h>
38 #include <linux/module.h>
39 #include <linux/slab.h>
40 #include <linux/init.h>
41 #include <linux/notifier.h>
42 #include <linux/input.h>
43
44 #include <linux/adb.h>
45 #include <linux/cuda.h>
46 #include <linux/pmu.h>
47
48 #include <asm/machdep.h>
49 #ifdef CONFIG_PPC_PMAC
50 #include <asm/pmac_feature.h>
51 #endif
52
53 #ifdef CONFIG_PMAC_BACKLIGHT
54 #include <asm/backlight.h>
55 #endif
56
57 MODULE_AUTHOR("Franz Sirl <Franz.Sirl-kernel@lauterbach.com>");
58
59 #define KEYB_KEYREG     0       /* register # for key up/down data */
60 #define KEYB_LEDREG     2       /* register # for leds on ADB keyboard */
61 #define MOUSE_DATAREG   0       /* reg# for movement/button codes from mouse */
62
63 static int adb_message_handler(struct notifier_block *, unsigned long, void *);
64 static struct notifier_block adbhid_adb_notifier = {
65         .notifier_call  = adb_message_handler,
66 };
67
68 /* Some special keys */
69 #define ADB_KEY_DEL             0x33
70 #define ADB_KEY_CMD             0x37
71 #define ADB_KEY_CAPSLOCK        0x39
72 #define ADB_KEY_FN              0x3f
73 #define ADB_KEY_FWDEL           0x75
74 #define ADB_KEY_POWER_OLD       0x7e
75 #define ADB_KEY_POWER           0x7f
76
77 u8 adb_to_linux_keycodes[128] = {
78         /* 0x00 */ KEY_A,               /*  30 */
79         /* 0x01 */ KEY_S,               /*  31 */
80         /* 0x02 */ KEY_D,               /*  32 */
81         /* 0x03 */ KEY_F,               /*  33 */
82         /* 0x04 */ KEY_H,               /*  35 */
83         /* 0x05 */ KEY_G,               /*  34 */
84         /* 0x06 */ KEY_Z,               /*  44 */
85         /* 0x07 */ KEY_X,               /*  45 */
86         /* 0x08 */ KEY_C,               /*  46 */
87         /* 0x09 */ KEY_V,               /*  47 */
88         /* 0x0a */ KEY_102ND,           /*  86 */
89         /* 0x0b */ KEY_B,               /*  48 */
90         /* 0x0c */ KEY_Q,               /*  16 */
91         /* 0x0d */ KEY_W,               /*  17 */
92         /* 0x0e */ KEY_E,               /*  18 */
93         /* 0x0f */ KEY_R,               /*  19 */
94         /* 0x10 */ KEY_Y,               /*  21 */
95         /* 0x11 */ KEY_T,               /*  20 */
96         /* 0x12 */ KEY_1,               /*   2 */
97         /* 0x13 */ KEY_2,               /*   3 */
98         /* 0x14 */ KEY_3,               /*   4 */
99         /* 0x15 */ KEY_4,               /*   5 */
100         /* 0x16 */ KEY_6,               /*   7 */
101         /* 0x17 */ KEY_5,               /*   6 */
102         /* 0x18 */ KEY_EQUAL,           /*  13 */
103         /* 0x19 */ KEY_9,               /*  10 */
104         /* 0x1a */ KEY_7,               /*   8 */
105         /* 0x1b */ KEY_MINUS,           /*  12 */
106         /* 0x1c */ KEY_8,               /*   9 */
107         /* 0x1d */ KEY_0,               /*  11 */
108         /* 0x1e */ KEY_RIGHTBRACE,      /*  27 */
109         /* 0x1f */ KEY_O,               /*  24 */
110         /* 0x20 */ KEY_U,               /*  22 */
111         /* 0x21 */ KEY_LEFTBRACE,       /*  26 */
112         /* 0x22 */ KEY_I,               /*  23 */
113         /* 0x23 */ KEY_P,               /*  25 */
114         /* 0x24 */ KEY_ENTER,           /*  28 */
115         /* 0x25 */ KEY_L,               /*  38 */
116         /* 0x26 */ KEY_J,               /*  36 */
117         /* 0x27 */ KEY_APOSTROPHE,      /*  40 */
118         /* 0x28 */ KEY_K,               /*  37 */
119         /* 0x29 */ KEY_SEMICOLON,       /*  39 */
120         /* 0x2a */ KEY_BACKSLASH,       /*  43 */
121         /* 0x2b */ KEY_COMMA,           /*  51 */
122         /* 0x2c */ KEY_SLASH,           /*  53 */
123         /* 0x2d */ KEY_N,               /*  49 */
124         /* 0x2e */ KEY_M,               /*  50 */
125         /* 0x2f */ KEY_DOT,             /*  52 */
126         /* 0x30 */ KEY_TAB,             /*  15 */
127         /* 0x31 */ KEY_SPACE,           /*  57 */
128         /* 0x32 */ KEY_GRAVE,           /*  41 */
129         /* 0x33 */ KEY_BACKSPACE,       /*  14 */
130         /* 0x34 */ KEY_KPENTER,         /*  96 */
131         /* 0x35 */ KEY_ESC,             /*   1 */
132         /* 0x36 */ KEY_LEFTCTRL,        /*  29 */
133         /* 0x37 */ KEY_LEFTMETA,        /* 125 */
134         /* 0x38 */ KEY_LEFTSHIFT,       /*  42 */
135         /* 0x39 */ KEY_CAPSLOCK,        /*  58 */
136         /* 0x3a */ KEY_LEFTALT,         /*  56 */
137         /* 0x3b */ KEY_LEFT,            /* 105 */
138         /* 0x3c */ KEY_RIGHT,           /* 106 */
139         /* 0x3d */ KEY_DOWN,            /* 108 */
140         /* 0x3e */ KEY_UP,              /* 103 */
141         /* 0x3f */ 0,
142         /* 0x40 */ 0,
143         /* 0x41 */ KEY_KPDOT,           /*  83 */
144         /* 0x42 */ 0,
145         /* 0x43 */ KEY_KPASTERISK,      /*  55 */
146         /* 0x44 */ 0,
147         /* 0x45 */ KEY_KPPLUS,          /*  78 */
148         /* 0x46 */ 0,
149         /* 0x47 */ KEY_NUMLOCK,         /*  69 */
150         /* 0x48 */ 0,
151         /* 0x49 */ 0,
152         /* 0x4a */ 0,
153         /* 0x4b */ KEY_KPSLASH,         /*  98 */
154         /* 0x4c */ KEY_KPENTER,         /*  96 */
155         /* 0x4d */ 0,
156         /* 0x4e */ KEY_KPMINUS,         /*  74 */
157         /* 0x4f */ 0,
158         /* 0x50 */ 0,
159         /* 0x51 */ KEY_KPEQUAL,         /* 117 */
160         /* 0x52 */ KEY_KP0,             /*  82 */
161         /* 0x53 */ KEY_KP1,             /*  79 */
162         /* 0x54 */ KEY_KP2,             /*  80 */
163         /* 0x55 */ KEY_KP3,             /*  81 */
164         /* 0x56 */ KEY_KP4,             /*  75 */
165         /* 0x57 */ KEY_KP5,             /*  76 */
166         /* 0x58 */ KEY_KP6,             /*  77 */
167         /* 0x59 */ KEY_KP7,             /*  71 */
168         /* 0x5a */ 0,
169         /* 0x5b */ KEY_KP8,             /*  72 */
170         /* 0x5c */ KEY_KP9,             /*  73 */
171         /* 0x5d */ KEY_YEN,             /* 124 */
172         /* 0x5e */ KEY_RO,              /*  89 */
173         /* 0x5f */ KEY_KPCOMMA,         /* 121 */
174         /* 0x60 */ KEY_F5,              /*  63 */
175         /* 0x61 */ KEY_F6,              /*  64 */
176         /* 0x62 */ KEY_F7,              /*  65 */
177         /* 0x63 */ KEY_F3,              /*  61 */
178         /* 0x64 */ KEY_F8,              /*  66 */
179         /* 0x65 */ KEY_F9,              /*  67 */
180         /* 0x66 */ KEY_HANJA,           /* 123 */
181         /* 0x67 */ KEY_F11,             /*  87 */
182         /* 0x68 */ KEY_HANGUEL,         /* 122 */
183         /* 0x69 */ KEY_SYSRQ,           /*  99 */
184         /* 0x6a */ 0,
185         /* 0x6b */ KEY_SCROLLLOCK,      /*  70 */
186         /* 0x6c */ 0,
187         /* 0x6d */ KEY_F10,             /*  68 */
188         /* 0x6e */ KEY_COMPOSE,         /* 127 */
189         /* 0x6f */ KEY_F12,             /*  88 */
190         /* 0x70 */ 0,
191         /* 0x71 */ KEY_PAUSE,           /* 119 */
192         /* 0x72 */ KEY_INSERT,          /* 110 */
193         /* 0x73 */ KEY_HOME,            /* 102 */
194         /* 0x74 */ KEY_PAGEUP,          /* 104 */
195         /* 0x75 */ KEY_DELETE,          /* 111 */
196         /* 0x76 */ KEY_F4,              /*  62 */
197         /* 0x77 */ KEY_END,             /* 107 */
198         /* 0x78 */ KEY_F2,              /*  60 */
199         /* 0x79 */ KEY_PAGEDOWN,        /* 109 */
200         /* 0x7a */ KEY_F1,              /*  59 */
201         /* 0x7b */ KEY_RIGHTSHIFT,      /*  54 */
202         /* 0x7c */ KEY_RIGHTALT,        /* 100 */
203         /* 0x7d */ KEY_RIGHTCTRL,       /*  97 */
204         /* 0x7e */ KEY_RIGHTMETA,       /* 126 */
205         /* 0x7f */ KEY_POWER,           /* 116 */
206 };
207
208 struct adbhid {
209         struct input_dev *input;
210         int id;
211         int default_id;
212         int original_handler_id;
213         int current_handler_id;
214         int mouse_kind;
215         unsigned char *keycode;
216         char name[64];
217         char phys[32];
218         int flags;
219 };
220
221 #define FLAG_FN_KEY_PRESSED     0x00000001
222 #define FLAG_POWER_FROM_FN      0x00000002
223 #define FLAG_EMU_FWDEL_DOWN     0x00000004
224
225 static struct adbhid *adbhid[16];
226
227 static void adbhid_probe(void);
228
229 static void adbhid_input_keycode(int, int, int, struct pt_regs *);
230
231 static void init_trackpad(int id);
232 static void init_trackball(int id);
233 static void init_turbomouse(int id);
234 static void init_microspeed(int id);
235 static void init_ms_a3(int id);
236
237 static struct adb_ids keyboard_ids;
238 static struct adb_ids mouse_ids;
239 static struct adb_ids buttons_ids;
240
241 #ifdef CONFIG_PMAC_BACKLIGHT
242 /* Exported to via-pmu.c */
243 int disable_kernel_backlight = 0;
244 #endif /* CONFIG_PMAC_BACKLIGHT */
245
246 /* Kind of keyboard, see Apple technote 1152  */
247 #define ADB_KEYBOARD_UNKNOWN    0
248 #define ADB_KEYBOARD_ANSI       0x0100
249 #define ADB_KEYBOARD_ISO        0x0200
250 #define ADB_KEYBOARD_JIS        0x0300
251
252 /* Kind of mouse  */
253 #define ADBMOUSE_STANDARD_100   0       /* Standard 100cpi mouse (handler 1) */
254 #define ADBMOUSE_STANDARD_200   1       /* Standard 200cpi mouse (handler 2) */
255 #define ADBMOUSE_EXTENDED       2       /* Apple Extended mouse (handler 4) */
256 #define ADBMOUSE_TRACKBALL      3       /* TrackBall (handler 4) */
257 #define ADBMOUSE_TRACKPAD       4       /* Apple's PowerBook trackpad (handler 4) */
258 #define ADBMOUSE_TURBOMOUSE5    5       /* Turbomouse 5 (previously req. mousehack) */
259 #define ADBMOUSE_MICROSPEED     6       /* Microspeed mouse (&trackball ?), MacPoint */
260 #define ADBMOUSE_TRACKBALLPRO   7       /* Trackball Pro (special buttons) */
261 #define ADBMOUSE_MS_A3          8       /* Mouse systems A3 trackball (handler 3) */
262 #define ADBMOUSE_MACALLY2       9       /* MacAlly 2-button mouse */
263
264 static void
265 adbhid_keyboard_input(unsigned char *data, int nb, struct pt_regs *regs, int apoll)
266 {
267         int id = (data[0] >> 4) & 0x0f;
268
269         if (!adbhid[id]) {
270                 printk(KERN_ERR "ADB HID on ID %d not yet registered, packet %#02x, %#02x, %#02x, %#02x\n",
271                        id, data[0], data[1], data[2], data[3]);
272                 return;
273         }
274
275         /* first check this is from register 0 */
276         if (nb != 3 || (data[0] & 3) != KEYB_KEYREG)
277                 return;         /* ignore it */
278         adbhid_input_keycode(id, data[1], 0, regs);
279         if (!(data[2] == 0xff || (data[2] == 0x7f && data[1] == 0x7f)))
280                 adbhid_input_keycode(id, data[2], 0, regs);
281 }
282
283 static void
284 adbhid_input_keycode(int id, int keycode, int repeat, struct pt_regs *regs)
285 {
286         struct adbhid *ahid = adbhid[id];
287         int up_flag;
288
289         up_flag = (keycode & 0x80);
290         keycode &= 0x7f;
291
292         switch (keycode) {
293         case ADB_KEY_CAPSLOCK: /* Generate down/up events for CapsLock everytime. */
294                 input_regs(ahid->input, regs);
295                 input_report_key(ahid->input, KEY_CAPSLOCK, 1);
296                 input_report_key(ahid->input, KEY_CAPSLOCK, 0);
297                 input_sync(ahid->input);
298                 return;
299 #ifdef CONFIG_PPC_PMAC
300         case ADB_KEY_POWER_OLD: /* Power key on PBook 3400 needs remapping */
301                 switch(pmac_call_feature(PMAC_FTR_GET_MB_INFO,
302                         NULL, PMAC_MB_INFO_MODEL, 0)) {
303                 case PMAC_TYPE_COMET:
304                 case PMAC_TYPE_HOOPER:
305                 case PMAC_TYPE_KANGA:
306                         keycode = ADB_KEY_POWER;
307                 }
308                 break;
309         case ADB_KEY_POWER: 
310                 /* Fn + Command will produce a bogus "power" keycode */
311                 if (ahid->flags & FLAG_FN_KEY_PRESSED) {
312                         keycode = ADB_KEY_CMD;
313                         if (up_flag)
314                                 ahid->flags &= ~FLAG_POWER_FROM_FN;
315                         else
316                                 ahid->flags |= FLAG_POWER_FROM_FN;
317                 } else if (ahid->flags & FLAG_POWER_FROM_FN) {
318                         keycode = ADB_KEY_CMD;
319                         ahid->flags &= ~FLAG_POWER_FROM_FN;
320                 }
321                 break;
322         case ADB_KEY_FN:
323                 /* Keep track of the Fn key state */
324                 if (up_flag) {
325                         ahid->flags &= ~FLAG_FN_KEY_PRESSED;
326                         /* Emulate Fn+delete = forward delete */
327                         if (ahid->flags & FLAG_EMU_FWDEL_DOWN) {
328                                 ahid->flags &= ~FLAG_EMU_FWDEL_DOWN;
329                                 keycode = ADB_KEY_FWDEL;
330                                 break;
331                         }
332                 } else
333                         ahid->flags |= FLAG_FN_KEY_PRESSED;
334                 /* Swallow the key press */
335                 return;
336         case ADB_KEY_DEL:
337                 /* Emulate Fn+delete = forward delete */
338                 if (ahid->flags & FLAG_FN_KEY_PRESSED) {
339                         keycode = ADB_KEY_FWDEL;
340                         if (up_flag)
341                                 ahid->flags &= ~FLAG_EMU_FWDEL_DOWN;
342                         else
343                                 ahid->flags |= FLAG_EMU_FWDEL_DOWN;
344                 }
345                 break;
346 #endif /* CONFIG_PPC_PMAC */
347         }
348
349         if (adbhid[id]->keycode[keycode]) {
350                 input_regs(adbhid[id]->input, regs);
351                 input_report_key(adbhid[id]->input,
352                                  adbhid[id]->keycode[keycode], !up_flag);
353                 input_sync(adbhid[id]->input);
354         } else
355                 printk(KERN_INFO "Unhandled ADB key (scancode %#02x) %s.\n", keycode,
356                        up_flag ? "released" : "pressed");
357
358 }
359
360 static void
361 adbhid_mouse_input(unsigned char *data, int nb, struct pt_regs *regs, int autopoll)
362 {
363         int id = (data[0] >> 4) & 0x0f;
364
365         if (!adbhid[id]) {
366                 printk(KERN_ERR "ADB HID on ID %d not yet registered\n", id);
367                 return;
368         }
369
370   /*
371     Handler 1 -- 100cpi original Apple mouse protocol.
372     Handler 2 -- 200cpi original Apple mouse protocol.
373
374     For Apple's standard one-button mouse protocol the data array will
375     contain the following values:
376
377                 BITS    COMMENTS
378     data[0] = dddd 1100 ADB command: Talk, register 0, for device dddd.
379     data[1] = bxxx xxxx First button and x-axis motion.
380     data[2] = byyy yyyy Second button and y-axis motion.
381
382     Handler 4 -- Apple Extended mouse protocol.
383
384     For Apple's 3-button mouse protocol the data array will contain the
385     following values:
386
387                 BITS    COMMENTS
388     data[0] = dddd 1100 ADB command: Talk, register 0, for device dddd.
389     data[1] = bxxx xxxx Left button and x-axis motion.
390     data[2] = byyy yyyy Second button and y-axis motion.
391     data[3] = byyy bxxx Third button and fourth button.  Y is additional
392               high bits of y-axis motion.  XY is additional
393               high bits of x-axis motion.
394
395     MacAlly 2-button mouse protocol.
396
397     For MacAlly 2-button mouse protocol the data array will contain the
398     following values:
399
400                 BITS    COMMENTS
401     data[0] = dddd 1100 ADB command: Talk, register 0, for device dddd.
402     data[1] = bxxx xxxx Left button and x-axis motion.
403     data[2] = byyy yyyy Right button and y-axis motion.
404     data[3] = ???? ???? unknown
405     data[4] = ???? ???? unknown
406
407   */
408
409         /* If it's a trackpad, we alias the second button to the first.
410            NOTE: Apple sends an ADB flush command to the trackpad when
411                  the first (the real) button is released. We could do
412                  this here using async flush requests.
413         */
414         switch (adbhid[id]->mouse_kind)
415         {
416             case ADBMOUSE_TRACKPAD:
417                 data[1] = (data[1] & 0x7f) | ((data[1] & data[2]) & 0x80);
418                 data[2] = data[2] | 0x80;
419                 break;
420             case ADBMOUSE_MICROSPEED:
421                 data[1] = (data[1] & 0x7f) | ((data[3] & 0x01) << 7);
422                 data[2] = (data[2] & 0x7f) | ((data[3] & 0x02) << 6);
423                 data[3] = (data[3] & 0x77) | ((data[3] & 0x04) << 5)
424                         | (data[3] & 0x08);
425                 break;
426             case ADBMOUSE_TRACKBALLPRO:
427                 data[1] = (data[1] & 0x7f) | (((data[3] & 0x04) << 5)
428                         & ((data[3] & 0x08) << 4));
429                 data[2] = (data[2] & 0x7f) | ((data[3] & 0x01) << 7);
430                 data[3] = (data[3] & 0x77) | ((data[3] & 0x02) << 6);
431                 break;
432             case ADBMOUSE_MS_A3:
433                 data[1] = (data[1] & 0x7f) | ((data[3] & 0x01) << 7);
434                 data[2] = (data[2] & 0x7f) | ((data[3] & 0x02) << 6);
435                 data[3] = ((data[3] & 0x04) << 5);
436                 break;
437             case ADBMOUSE_MACALLY2:
438                 data[3] = (data[2] & 0x80) ? 0x80 : 0x00;
439                 data[2] |= 0x80;  /* Right button is mapped as button 3 */
440                 nb=4;
441                 break;
442         }
443
444         input_regs(adbhid[id]->input, regs);
445
446         input_report_key(adbhid[id]->input, BTN_LEFT,   !((data[1] >> 7) & 1));
447         input_report_key(adbhid[id]->input, BTN_MIDDLE, !((data[2] >> 7) & 1));
448
449         if (nb >= 4 && adbhid[id]->mouse_kind != ADBMOUSE_TRACKPAD)
450                 input_report_key(adbhid[id]->input, BTN_RIGHT,  !((data[3] >> 7) & 1));
451
452         input_report_rel(adbhid[id]->input, REL_X,
453                          ((data[2]&0x7f) < 64 ? (data[2]&0x7f) : (data[2]&0x7f)-128 ));
454         input_report_rel(adbhid[id]->input, REL_Y,
455                          ((data[1]&0x7f) < 64 ? (data[1]&0x7f) : (data[1]&0x7f)-128 ));
456
457         input_sync(adbhid[id]->input);
458 }
459
460 static void
461 adbhid_buttons_input(unsigned char *data, int nb, struct pt_regs *regs, int autopoll)
462 {
463         int id = (data[0] >> 4) & 0x0f;
464
465         if (!adbhid[id]) {
466                 printk(KERN_ERR "ADB HID on ID %d not yet registered\n", id);
467                 return;
468         }
469
470         input_regs(adbhid[id]->input, regs);
471
472         switch (adbhid[id]->original_handler_id) {
473         default:
474         case 0x02: /* Adjustable keyboard button device */
475           {
476                 int down = (data[1] == (data[1] & 0xf));
477
478                 switch (data[1] & 0x0f) {
479                 case 0x0:       /* microphone */
480                         input_report_key(adbhid[id]->input, KEY_SOUND, down);
481                         break;
482
483                 case 0x1:       /* mute */
484                         input_report_key(adbhid[id]->input, KEY_MUTE, down);
485                         break;
486
487                 case 0x2:       /* volume decrease */
488                         input_report_key(adbhid[id]->input, KEY_VOLUMEDOWN, down);
489                         break;
490
491                 case 0x3:       /* volume increase */
492                         input_report_key(adbhid[id]->input, KEY_VOLUMEUP, down);
493                         break;
494
495                 default:
496                         printk(KERN_INFO "Unhandled ADB_MISC event %02x, %02x, %02x, %02x\n",
497                                data[0], data[1], data[2], data[3]);
498                         break;
499                 }
500           }
501           break;
502
503         case 0x1f: /* Powerbook button device */
504           {
505                 int down = (data[1] == (data[1] & 0xf));
506 #ifdef CONFIG_PMAC_BACKLIGHT
507                 int backlight = get_backlight_level();
508 #endif
509                 /*
510                  * XXX: Where is the contrast control for the passive?
511                  *  -- Cort
512                  */
513
514                 switch (data[1] & 0x0f) {
515                 case 0x8:       /* mute */
516                         input_report_key(adbhid[id]->input, KEY_MUTE, down);
517                         break;
518
519                 case 0x7:       /* volume decrease */
520                         input_report_key(adbhid[id]->input, KEY_VOLUMEDOWN, down);
521                         break;
522
523                 case 0x6:       /* volume increase */
524                         input_report_key(adbhid[id]->input, KEY_VOLUMEUP, down);
525                         break;
526
527                 case 0xb:       /* eject */
528                         input_report_key(adbhid[id]->input, KEY_EJECTCD, down);
529                         break;
530
531                 case 0xa:       /* brightness decrease */
532 #ifdef CONFIG_PMAC_BACKLIGHT
533                         if (!disable_kernel_backlight) {
534                                 if (down && backlight >= 0) {
535                                         if (backlight > BACKLIGHT_OFF)
536                                                 set_backlight_level(backlight-1);
537                                         else
538                                                 set_backlight_level(BACKLIGHT_OFF);
539                                 }
540                         }
541 #endif /* CONFIG_PMAC_BACKLIGHT */
542                         input_report_key(adbhid[id]->input, KEY_BRIGHTNESSDOWN, down);
543                         break;
544
545                 case 0x9:       /* brightness increase */
546 #ifdef CONFIG_PMAC_BACKLIGHT
547                         if (!disable_kernel_backlight) {
548                                 if (down && backlight >= 0) {
549                                         if (backlight < BACKLIGHT_MAX)
550                                                 set_backlight_level(backlight+1);
551                                         else 
552                                                 set_backlight_level(BACKLIGHT_MAX);
553                                 }
554                         }
555 #endif /* CONFIG_PMAC_BACKLIGHT */
556                         input_report_key(adbhid[id]->input, KEY_BRIGHTNESSUP, down);
557                         break;
558
559                 case 0xc:       /* videomode switch */
560                         input_report_key(adbhid[id]->input, KEY_SWITCHVIDEOMODE, down);
561                         break;
562
563                 case 0xd:       /* keyboard illumination toggle */
564                         input_report_key(adbhid[id]->input, KEY_KBDILLUMTOGGLE, down);
565                         break;
566
567                 case 0xe:       /* keyboard illumination decrease */
568                         input_report_key(adbhid[id]->input, KEY_KBDILLUMDOWN, down);
569                         break;
570
571                 case 0xf:
572                         switch (data[1]) {
573                         case 0x8f:
574                         case 0x0f:
575                                 /* keyboard illumination increase */
576                                 input_report_key(adbhid[id]->input, KEY_KBDILLUMUP, down);
577                                 break;
578
579                         case 0x7f:
580                         case 0xff:
581                                 /* keypad overlay toogle */
582                                 break;
583
584                         default:
585                                 printk(KERN_INFO "Unhandled ADB_MISC event %02x, %02x, %02x, %02x\n",
586                                        data[0], data[1], data[2], data[3]);
587                                 break;
588                         }
589                         break;
590                 default:
591                         printk(KERN_INFO "Unhandled ADB_MISC event %02x, %02x, %02x, %02x\n",
592                                data[0], data[1], data[2], data[3]);
593                         break;
594                 }
595           }
596           break;
597         }
598
599         input_sync(adbhid[id]->input);
600 }
601
602 static struct adb_request led_request;
603 static int leds_pending[16];
604 static int leds_req_pending;
605 static int pending_devs[16];
606 static int pending_led_start=0;
607 static int pending_led_end=0;
608 static DEFINE_SPINLOCK(leds_lock);
609
610 static void leds_done(struct adb_request *req)
611 {
612         int leds = 0, device = 0, pending = 0;
613         unsigned long flags;
614
615         spin_lock_irqsave(&leds_lock, flags);
616
617         if (pending_led_start != pending_led_end) {
618                 device = pending_devs[pending_led_start];
619                 leds = leds_pending[device] & 0xff;
620                 leds_pending[device] = 0;
621                 pending_led_start++;
622                 pending_led_start = (pending_led_start < 16) ? pending_led_start : 0;
623                 pending = leds_req_pending;
624         } else
625                 leds_req_pending = 0;
626         spin_unlock_irqrestore(&leds_lock, flags);
627         if (pending)
628                 adb_request(&led_request, leds_done, 0, 3,
629                             ADB_WRITEREG(device, KEYB_LEDREG), 0xff, ~leds);
630 }
631
632 static void real_leds(unsigned char leds, int device)
633 {
634         unsigned long flags;
635
636         spin_lock_irqsave(&leds_lock, flags);
637         if (!leds_req_pending) {
638                 leds_req_pending = 1;
639                 spin_unlock_irqrestore(&leds_lock, flags);             
640                 adb_request(&led_request, leds_done, 0, 3,
641                             ADB_WRITEREG(device, KEYB_LEDREG), 0xff, ~leds);
642                 return;
643         } else {
644                 if (!(leds_pending[device] & 0x100)) {
645                         pending_devs[pending_led_end] = device;
646                         pending_led_end++;
647                         pending_led_end = (pending_led_end < 16) ? pending_led_end : 0;
648                 }
649                 leds_pending[device] = leds | 0x100;
650         }
651         spin_unlock_irqrestore(&leds_lock, flags);             
652 }
653
654 /*
655  * Event callback from the input module. Events that change the state of
656  * the hardware are processed here.
657  */
658 static int adbhid_kbd_event(struct input_dev *dev, unsigned int type, unsigned int code, int value)
659 {
660         struct adbhid *adbhid = dev->private;
661         unsigned char leds;
662
663         switch (type) {
664         case EV_LED:
665           leds = (test_bit(LED_SCROLLL, dev->led) ? 4 : 0)
666                | (test_bit(LED_NUML,    dev->led) ? 1 : 0)
667                | (test_bit(LED_CAPSL,   dev->led) ? 2 : 0);
668           real_leds(leds, adbhid->id);
669           return 0;
670         }
671
672         return -1;
673 }
674
675 static int
676 adb_message_handler(struct notifier_block *this, unsigned long code, void *x)
677 {
678         switch (code) {
679         case ADB_MSG_PRE_RESET:
680         case ADB_MSG_POWERDOWN:
681                 /* Stop the repeat timer. Autopoll is already off at this point */
682                 {
683                         int i;
684                         for (i = 1; i < 16; i++) {
685                                 if (adbhid[i])
686                                         del_timer_sync(&adbhid[i]->input->timer);
687                         }
688                 }
689
690                 /* Stop pending led requests */
691                 while(leds_req_pending)
692                         adb_poll();
693                 break;
694
695         case ADB_MSG_POST_RESET:
696                 adbhid_probe();
697                 break;
698         }
699         return NOTIFY_DONE;
700 }
701
702 static int
703 adbhid_input_register(int id, int default_id, int original_handler_id,
704                       int current_handler_id, int mouse_kind)
705 {
706         struct adbhid *hid;
707         struct input_dev *input_dev;
708         int err;
709         int i;
710
711         if (adbhid[id]) {
712                 printk(KERN_ERR "Trying to reregister ADB HID on ID %d\n", id);
713                 return -EEXIST;
714         }
715
716         adbhid[id] = hid = kzalloc(sizeof(struct adbhid), GFP_KERNEL);
717         input_dev = input_allocate_device();
718         if (!hid || !input_dev) {
719                 err = -ENOMEM;
720                 goto fail;
721
722         }
723
724         sprintf(hid->phys, "adb%d:%d.%02x/input", id, default_id, original_handler_id);
725
726         hid->input = input_dev;
727         hid->id = default_id;
728         hid->original_handler_id = original_handler_id;
729         hid->current_handler_id = current_handler_id;
730         hid->mouse_kind = mouse_kind;
731         hid->flags = 0;
732         input_dev->private = hid;
733         input_dev->name = hid->name;
734         input_dev->phys = hid->phys;
735         input_dev->id.bustype = BUS_ADB;
736         input_dev->id.vendor = 0x0001;
737         input_dev->id.product = (id << 12) | (default_id << 8) | original_handler_id;
738         input_dev->id.version = 0x0100;
739
740         switch (default_id) {
741         case ADB_KEYBOARD:
742                 hid->keycode = kmalloc(sizeof(adb_to_linux_keycodes), GFP_KERNEL);
743                 if (!hid->keycode) {
744                         err = -ENOMEM;
745                         goto fail;
746                 }
747
748                 sprintf(hid->name, "ADB keyboard");
749
750                 memcpy(hid->keycode, adb_to_linux_keycodes, sizeof(adb_to_linux_keycodes));
751
752                 printk(KERN_INFO "Detected ADB keyboard, type ");
753                 switch (original_handler_id) {
754                 default:
755                         printk("<unknown>.\n");
756                         input_dev->id.version = ADB_KEYBOARD_UNKNOWN;
757                         break;
758
759                 case 0x01: case 0x02: case 0x03: case 0x06: case 0x08:
760                 case 0x0C: case 0x10: case 0x18: case 0x1B: case 0x1C:
761                 case 0xC0: case 0xC3: case 0xC6:
762                         printk("ANSI.\n");
763                         input_dev->id.version = ADB_KEYBOARD_ANSI;
764                         break;
765
766                 case 0x04: case 0x05: case 0x07: case 0x09: case 0x0D:
767                 case 0x11: case 0x14: case 0x19: case 0x1D: case 0xC1:
768                 case 0xC4: case 0xC7:
769                         printk("ISO, swapping keys.\n");
770                         input_dev->id.version = ADB_KEYBOARD_ISO;
771                         i = hid->keycode[10];
772                         hid->keycode[10] = hid->keycode[50];
773                         hid->keycode[50] = i;
774                         break;
775
776                 case 0x12: case 0x15: case 0x16: case 0x17: case 0x1A:
777                 case 0x1E: case 0xC2: case 0xC5: case 0xC8: case 0xC9:
778                         printk("JIS.\n");
779                         input_dev->id.version = ADB_KEYBOARD_JIS;
780                         break;
781                 }
782
783                 for (i = 0; i < 128; i++)
784                         if (hid->keycode[i])
785                                 set_bit(hid->keycode[i], input_dev->keybit);
786
787                 input_dev->evbit[0] = BIT(EV_KEY) | BIT(EV_LED) | BIT(EV_REP);
788                 input_dev->ledbit[0] = BIT(LED_SCROLLL) | BIT(LED_CAPSL) | BIT(LED_NUML);
789                 input_dev->event = adbhid_kbd_event;
790                 input_dev->keycodemax = 127;
791                 input_dev->keycodesize = 1;
792                 break;
793
794         case ADB_MOUSE:
795                 sprintf(hid->name, "ADB mouse");
796
797                 input_dev->evbit[0] = BIT(EV_KEY) | BIT(EV_REL);
798                 input_dev->keybit[LONG(BTN_MOUSE)] = BIT(BTN_LEFT) | BIT(BTN_MIDDLE) | BIT(BTN_RIGHT);
799                 input_dev->relbit[0] = BIT(REL_X) | BIT(REL_Y);
800                 break;
801
802         case ADB_MISC:
803                 switch (original_handler_id) {
804                 case 0x02: /* Adjustable keyboard button device */
805                         sprintf(hid->name, "ADB adjustable keyboard buttons");
806                         input_dev->evbit[0] = BIT(EV_KEY) | BIT(EV_REP);
807                         set_bit(KEY_SOUND, input_dev->keybit);
808                         set_bit(KEY_MUTE, input_dev->keybit);
809                         set_bit(KEY_VOLUMEUP, input_dev->keybit);
810                         set_bit(KEY_VOLUMEDOWN, input_dev->keybit);
811                         break;
812                 case 0x1f: /* Powerbook button device */
813                         sprintf(hid->name, "ADB Powerbook buttons");
814                         input_dev->evbit[0] = BIT(EV_KEY) | BIT(EV_REP);
815                         set_bit(KEY_MUTE, input_dev->keybit);
816                         set_bit(KEY_VOLUMEUP, input_dev->keybit);
817                         set_bit(KEY_VOLUMEDOWN, input_dev->keybit);
818                         set_bit(KEY_BRIGHTNESSUP, input_dev->keybit);
819                         set_bit(KEY_BRIGHTNESSDOWN, input_dev->keybit);
820                         set_bit(KEY_EJECTCD, input_dev->keybit);
821                         set_bit(KEY_SWITCHVIDEOMODE, input_dev->keybit);
822                         set_bit(KEY_KBDILLUMTOGGLE, input_dev->keybit);
823                         set_bit(KEY_KBDILLUMDOWN, input_dev->keybit);
824                         set_bit(KEY_KBDILLUMUP, input_dev->keybit);
825                         break;
826                 }
827                 if (hid->name[0])
828                         break;
829                 /* else fall through */
830
831         default:
832                 printk(KERN_INFO "Trying to register unknown ADB device to input layer.\n");
833                 err = -ENODEV;
834                 goto fail;
835         }
836
837         input_dev->keycode = hid->keycode;
838
839         input_register_device(input_dev);
840
841         if (default_id == ADB_KEYBOARD) {
842                 /* HACK WARNING!! This should go away as soon there is an utility
843                  * to control that for event devices.
844                  */
845                 input_dev->rep[REP_DELAY] = 500;   /* input layer default: 250 */
846                 input_dev->rep[REP_PERIOD] = 66; /* input layer default: 33 */
847         }
848
849         return 0;
850
851  fail:  input_free_device(input_dev);
852         kfree(hid);
853         adbhid[id] = NULL;
854         return err;
855 }
856
857 static void adbhid_input_unregister(int id)
858 {
859         input_unregister_device(adbhid[id]->input);
860         kfree(adbhid[id]->keycode);
861         kfree(adbhid[id]);
862         adbhid[id] = NULL;
863 }
864
865
866 static u16
867 adbhid_input_reregister(int id, int default_id, int org_handler_id,
868                         int cur_handler_id, int mk)
869 {
870         if (adbhid[id]) {
871                 if (adbhid[id]->input->id.product !=
872                     ((id << 12)|(default_id << 8)|org_handler_id)) {
873                         adbhid_input_unregister(id);
874                         adbhid_input_register(id, default_id, org_handler_id,
875                                               cur_handler_id, mk);
876                 }
877         } else
878                 adbhid_input_register(id, default_id, org_handler_id,
879                                       cur_handler_id, mk);
880         return 1<<id;
881 }
882
883 static void
884 adbhid_input_devcleanup(u16 exist)
885 {
886         int i;
887         for(i=1; i<16; i++)
888                 if (adbhid[i] && !(exist&(1<<i)))
889                         adbhid_input_unregister(i);
890 }
891
892 static void
893 adbhid_probe(void)
894 {
895         struct adb_request req;
896         int i, default_id, org_handler_id, cur_handler_id;
897         u16 reg = 0;
898
899         adb_register(ADB_MOUSE, 0, &mouse_ids, adbhid_mouse_input);
900         adb_register(ADB_KEYBOARD, 0, &keyboard_ids, adbhid_keyboard_input);
901         adb_register(ADB_MISC, 0, &buttons_ids, adbhid_buttons_input);
902
903         for (i = 0; i < keyboard_ids.nids; i++) {
904                 int id = keyboard_ids.id[i];
905
906                 adb_get_infos(id, &default_id, &org_handler_id);
907
908                 /* turn off all leds */
909                 adb_request(&req, NULL, ADBREQ_SYNC, 3,
910                             ADB_WRITEREG(id, KEYB_LEDREG), 0xff, 0xff);
911
912                 /* Enable full feature set of the keyboard
913                    ->get it to send separate codes for left and right shift,
914                    control, option keys */
915 #if 0           /* handler 5 doesn't send separate codes for R modifiers */
916                 if (adb_try_handler_change(id, 5))
917                         printk("ADB keyboard at %d, handler set to 5\n", id);
918                 else
919 #endif
920                 if (adb_try_handler_change(id, 3))
921                         printk("ADB keyboard at %d, handler set to 3\n", id);
922                 else
923                         printk("ADB keyboard at %d, handler 1\n", id);
924
925                 adb_get_infos(id, &default_id, &cur_handler_id);
926                 reg |= adbhid_input_reregister(id, default_id, org_handler_id,
927                                                cur_handler_id, 0);
928         }
929
930         for (i = 0; i < buttons_ids.nids; i++) {
931                 int id = buttons_ids.id[i];
932
933                 adb_get_infos(id, &default_id, &org_handler_id);
934                 reg |= adbhid_input_reregister(id, default_id, org_handler_id,
935                                                org_handler_id, 0);
936         }
937
938         /* Try to switch all mice to handler 4, or 2 for three-button
939            mode and full resolution. */
940         for (i = 0; i < mouse_ids.nids; i++) {
941                 int id = mouse_ids.id[i];
942                 int mouse_kind;
943
944                 adb_get_infos(id, &default_id, &org_handler_id);
945
946                 if (adb_try_handler_change(id, 4)) {
947                         printk("ADB mouse at %d, handler set to 4", id);
948                         mouse_kind = ADBMOUSE_EXTENDED;
949                 }
950                 else if (adb_try_handler_change(id, 0x2F)) {
951                         printk("ADB mouse at %d, handler set to 0x2F", id);
952                         mouse_kind = ADBMOUSE_MICROSPEED;
953                 }
954                 else if (adb_try_handler_change(id, 0x42)) {
955                         printk("ADB mouse at %d, handler set to 0x42", id);
956                         mouse_kind = ADBMOUSE_TRACKBALLPRO;
957                 }
958                 else if (adb_try_handler_change(id, 0x66)) {
959                         printk("ADB mouse at %d, handler set to 0x66", id);
960                         mouse_kind = ADBMOUSE_MICROSPEED;
961                 }
962                 else if (adb_try_handler_change(id, 0x5F)) {
963                         printk("ADB mouse at %d, handler set to 0x5F", id);
964                         mouse_kind = ADBMOUSE_MICROSPEED;
965                 }
966                 else if (adb_try_handler_change(id, 3)) {
967                         printk("ADB mouse at %d, handler set to 3", id);
968                         mouse_kind = ADBMOUSE_MS_A3;
969                 }
970                 else if (adb_try_handler_change(id, 2)) {
971                         printk("ADB mouse at %d, handler set to 2", id);
972                         mouse_kind = ADBMOUSE_STANDARD_200;
973                 }
974                 else {
975                         printk("ADB mouse at %d, handler 1", id);
976                         mouse_kind = ADBMOUSE_STANDARD_100;
977                 }
978
979                 if ((mouse_kind == ADBMOUSE_TRACKBALLPRO)
980                     || (mouse_kind == ADBMOUSE_MICROSPEED)) {
981                         init_microspeed(id);
982                 } else if (mouse_kind == ADBMOUSE_MS_A3) {
983                         init_ms_a3(id);
984                 } else if (mouse_kind ==  ADBMOUSE_EXTENDED) {
985                         /*
986                          * Register 1 is usually used for device
987                          * identification.  Here, we try to identify
988                          * a known device and call the appropriate
989                          * init function.
990                          */
991                         adb_request(&req, NULL, ADBREQ_SYNC | ADBREQ_REPLY, 1,
992                                     ADB_READREG(id, 1));
993
994                         if ((req.reply_len) &&
995                             (req.reply[1] == 0x9a) && ((req.reply[2] == 0x21)
996                                 || (req.reply[2] == 0x20))) {
997                                 mouse_kind = ADBMOUSE_TRACKBALL;
998                                 init_trackball(id);
999                         }
1000                         else if ((req.reply_len >= 4) &&
1001                             (req.reply[1] == 0x74) && (req.reply[2] == 0x70) &&
1002                             (req.reply[3] == 0x61) && (req.reply[4] == 0x64)) {
1003                                 mouse_kind = ADBMOUSE_TRACKPAD;
1004                                 init_trackpad(id);
1005                         }
1006                         else if ((req.reply_len >= 4) &&
1007                             (req.reply[1] == 0x4b) && (req.reply[2] == 0x4d) &&
1008                             (req.reply[3] == 0x4c) && (req.reply[4] == 0x31)) {
1009                                 mouse_kind = ADBMOUSE_TURBOMOUSE5;
1010                                 init_turbomouse(id);
1011                         }
1012                         else if ((req.reply_len == 9) &&
1013                             (req.reply[1] == 0x4b) && (req.reply[2] == 0x4f) &&
1014                             (req.reply[3] == 0x49) && (req.reply[4] == 0x54)) {
1015                                 if (adb_try_handler_change(id, 0x42)) {
1016                                         printk("\nADB MacAlly 2-button mouse at %d, handler set to 0x42", id);
1017                                         mouse_kind = ADBMOUSE_MACALLY2;
1018                                 }
1019                         }
1020                 }
1021                 printk("\n");
1022
1023                 adb_get_infos(id, &default_id, &cur_handler_id);
1024                 reg |= adbhid_input_reregister(id, default_id, org_handler_id,
1025                                                cur_handler_id, mouse_kind);
1026         }
1027         adbhid_input_devcleanup(reg);
1028 }
1029
1030 static void 
1031 init_trackpad(int id)
1032 {
1033         struct adb_request req;
1034         unsigned char r1_buffer[8];
1035
1036         printk(" (trackpad)");
1037
1038         adb_request(&req, NULL, ADBREQ_SYNC | ADBREQ_REPLY, 1,
1039                     ADB_READREG(id,1));
1040         if (req.reply_len < 8)
1041             printk("bad length for reg. 1\n");
1042         else
1043         {
1044             memcpy(r1_buffer, &req.reply[1], 8);
1045
1046             adb_request(&req, NULL, ADBREQ_SYNC, 9,
1047                 ADB_WRITEREG(id,1),
1048                     r1_buffer[0],
1049                     r1_buffer[1],
1050                     r1_buffer[2],
1051                     r1_buffer[3],
1052                     r1_buffer[4],
1053                     r1_buffer[5],
1054                     0x0d,
1055                     r1_buffer[7]);
1056
1057             adb_request(&req, NULL, ADBREQ_SYNC, 9,
1058                 ADB_WRITEREG(id,2),
1059                     0x99,
1060                     0x94,
1061                     0x19,
1062                     0xff,
1063                     0xb2,
1064                     0x8a,
1065                     0x1b,
1066                     0x50);
1067
1068             adb_request(&req, NULL, ADBREQ_SYNC, 9,
1069                 ADB_WRITEREG(id,1),
1070                     r1_buffer[0],
1071                     r1_buffer[1],
1072                     r1_buffer[2],
1073                     r1_buffer[3],
1074                     r1_buffer[4],
1075                     r1_buffer[5],
1076                     0x03, /*r1_buffer[6],*/
1077                     r1_buffer[7]);
1078
1079             /* Without this flush, the trackpad may be locked up */
1080             adb_request(&req, NULL, ADBREQ_SYNC, 1, ADB_FLUSH(id));
1081         }
1082 }
1083
1084 static void 
1085 init_trackball(int id)
1086 {
1087         struct adb_request req;
1088
1089         printk(" (trackman/mouseman)");
1090
1091         adb_request(&req, NULL, ADBREQ_SYNC, 3,
1092         ADB_WRITEREG(id,1), 00,0x81);
1093
1094         adb_request(&req, NULL, ADBREQ_SYNC, 3,
1095         ADB_WRITEREG(id,1), 01,0x81);
1096
1097         adb_request(&req, NULL, ADBREQ_SYNC, 3,
1098         ADB_WRITEREG(id,1), 02,0x81);
1099
1100         adb_request(&req, NULL, ADBREQ_SYNC, 3,
1101         ADB_WRITEREG(id,1), 03,0x38);
1102
1103         adb_request(&req, NULL, ADBREQ_SYNC, 3,
1104         ADB_WRITEREG(id,1), 00,0x81);
1105
1106         adb_request(&req, NULL, ADBREQ_SYNC, 3,
1107         ADB_WRITEREG(id,1), 01,0x81);
1108
1109         adb_request(&req, NULL, ADBREQ_SYNC, 3,
1110         ADB_WRITEREG(id,1), 02,0x81);
1111
1112         adb_request(&req, NULL, ADBREQ_SYNC, 3,
1113         ADB_WRITEREG(id,1), 03,0x38);
1114 }
1115
1116 static void
1117 init_turbomouse(int id)
1118 {
1119         struct adb_request req;
1120
1121         printk(" (TurboMouse 5)");
1122
1123         adb_request(&req, NULL, ADBREQ_SYNC, 1, ADB_FLUSH(id));
1124
1125         adb_request(&req, NULL, ADBREQ_SYNC, 1, ADB_FLUSH(3));
1126
1127         adb_request(&req, NULL, ADBREQ_SYNC, 9,
1128         ADB_WRITEREG(3,2),
1129             0xe7,
1130             0x8c,
1131             0,
1132             0,
1133             0,
1134             0xff,
1135             0xff,
1136             0x94);
1137
1138         adb_request(&req, NULL, ADBREQ_SYNC, 1, ADB_FLUSH(3));
1139
1140         adb_request(&req, NULL, ADBREQ_SYNC, 9,
1141         ADB_WRITEREG(3,2),
1142             0xa5,
1143             0x14,
1144             0,
1145             0,
1146             0x69,
1147             0xff,
1148             0xff,
1149             0x27);
1150 }
1151
1152 static void
1153 init_microspeed(int id)
1154 {
1155         struct adb_request req;
1156
1157         printk(" (Microspeed/MacPoint or compatible)");
1158
1159         adb_request(&req, NULL, ADBREQ_SYNC, 1, ADB_FLUSH(id));
1160
1161         /* This will initialize mice using the Microspeed, MacPoint and
1162            other compatible firmware. Bit 12 enables extended protocol.
1163            
1164            Register 1 Listen (4 Bytes)
1165             0 -  3     Button is mouse (set also for double clicking!!!)
1166             4 -  7     Button is locking (affects change speed also)
1167             8 - 11     Button changes speed
1168            12          1 = Extended mouse mode, 0 = normal mouse mode
1169            13 - 15     unused 0
1170            16 - 23     normal speed
1171            24 - 31     changed speed
1172
1173        Register 1 talk holds version and product identification information.
1174        Register 1 Talk (4 Bytes):
1175             0 -  7     Product code
1176             8 - 23     undefined, reserved
1177            24 - 31     Version number
1178         
1179        Speed 0 is max. 1 to 255 set speed in increments of 1/256 of max.
1180  */
1181         adb_request(&req, NULL, ADBREQ_SYNC, 5,
1182         ADB_WRITEREG(id,1),
1183             0x20,       /* alt speed = 0x20 (rather slow) */
1184             0x00,       /* norm speed = 0x00 (fastest) */
1185             0x10,       /* extended protocol, no speed change */
1186             0x07);      /* all buttons enabled as mouse buttons, no locking */
1187
1188
1189         adb_request(&req, NULL, ADBREQ_SYNC, 1, ADB_FLUSH(id));
1190 }
1191
1192 static void
1193 init_ms_a3(int id)
1194 {
1195         struct adb_request req;
1196
1197         printk(" (Mouse Systems A3 Mouse, or compatible)");
1198         adb_request(&req, NULL, ADBREQ_SYNC, 3,
1199         ADB_WRITEREG(id, 0x2),
1200             0x00,
1201             0x07);
1202  
1203         adb_request(&req, NULL, ADBREQ_SYNC, 1, ADB_FLUSH(id));
1204 }
1205
1206 static int __init adbhid_init(void)
1207 {
1208 #ifndef CONFIG_MAC
1209         if (!machine_is(chrp) && !machine_is(powermac))
1210                 return 0;
1211 #endif
1212
1213         led_request.complete = 1;
1214
1215         adbhid_probe();
1216
1217         blocking_notifier_chain_register(&adb_client_list,
1218                         &adbhid_adb_notifier);
1219
1220         return 0;
1221 }
1222
1223 static void __exit adbhid_exit(void)
1224 {
1225 }
1226  
1227 module_init(adbhid_init);
1228 module_exit(adbhid_exit);