git.oblomov.eu Git - linux-2.6/blob - arch/blackfin/mach-common/pm.c

   1 /*
   2  * File:         arch/blackfin/mach-common/pm.c
   3  * Based on:     arm/mach-omap/pm.c
   4  * Author:       Cliff Brake <cbrake@accelent.com> Copyright (c) 2001
   5  *
   6  * Created:      2001
   7  * Description:  Blackfin power management
   8  *
   9  * Modified:     Nicolas Pitre - PXA250 support
  10  *                Copyright (c) 2002 Monta Vista Software, Inc.
  11  *               David Singleton - OMAP1510
  12  *                Copyright (c) 2002 Monta Vista Software, Inc.
  13  *               Dirk Behme <dirk.behme@de.bosch.com> - OMAP1510/1610
  14  *                Copyright 2004
  15  *               Copyright 2004-2008 Analog Devices Inc.
  16  *
  17  * Bugs:         Enter bugs at http://blackfin.uclinux.org/
  18  *
  19  * This program is free software; you can redistribute it and/or modify
  20  * it under the terms of the GNU General Public License as published by
  21  * the Free Software Foundation; either version 2 of the License, or
  22  * (at your option) any later version.
  23  *
  24  * This program is distributed in the hope that it will be useful,
  25  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  26  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  27  * GNU General Public License for more details.
  28  *
  29  * You should have received a copy of the GNU General Public License
  30  * along with this program; if not, see the file COPYING, or write
  31  * to the Free Software Foundation, Inc.,
  32  * 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
  33  */
  34
  35 #include <linux/suspend.h>
  36 #include <linux/sched.h>
  37 #include <linux/proc_fs.h>
  38 #include <linux/io.h>
  39 #include <linux/irq.h>
  40
  41 #include <asm/gpio.h>
  42 #include <asm/dma.h>
  43 #include <asm/dpmc.h>
  44
  45 #ifdef CONFIG_PM_WAKEUP_GPIO_POLAR_H
  46 #define WAKEUP_TYPE     PM_WAKE_HIGH
  47 #endif
  48
  49 #ifdef CONFIG_PM_WAKEUP_GPIO_POLAR_L
  50 #define WAKEUP_TYPE     PM_WAKE_LOW
  51 #endif
  52
  53 #ifdef CONFIG_PM_WAKEUP_GPIO_POLAR_EDGE_F
  54 #define WAKEUP_TYPE     PM_WAKE_FALLING
  55 #endif
  56
  57 #ifdef CONFIG_PM_WAKEUP_GPIO_POLAR_EDGE_R
  58 #define WAKEUP_TYPE     PM_WAKE_RISING
  59 #endif
  60
  61 #ifdef CONFIG_PM_WAKEUP_GPIO_POLAR_EDGE_B
  62 #define WAKEUP_TYPE     PM_WAKE_BOTH_EDGES
  63 #endif
  64
  65
  66 void bfin_pm_suspend_standby_enter(void)
  67 {
  68         unsigned long flags;
  69
  70 #ifdef CONFIG_PM_WAKEUP_BY_GPIO
  71         gpio_pm_wakeup_request(CONFIG_PM_WAKEUP_GPIO_NUMBER, WAKEUP_TYPE);
  72 #endif
  73
  74         local_irq_save(flags);
  75         bfin_pm_standby_setup();
  76
  77 #ifdef CONFIG_PM_BFIN_SLEEP_DEEPER
  78         sleep_deeper(bfin_sic_iwr[0], bfin_sic_iwr[1], bfin_sic_iwr[2]);
  79 #else
  80         sleep_mode(bfin_sic_iwr[0], bfin_sic_iwr[1], bfin_sic_iwr[2]);
  81 #endif
  82
  83         bfin_pm_standby_restore();
  84
  85 #if defined(CONFIG_BF54x) || defined(CONFIG_BF52x)  || defined(CONFIG_BF561)
  86         bfin_write_SIC_IWR0(IWR_DISABLE_ALL);
  87 #if defined(CONFIG_BF52x)
  88         /* BF52x system reset does not properly reset SIC_IWR1 which
  89          * will screw up the bootrom as it relies on MDMA0/1 waking it
  90          * up from IDLE instructions.  See this report for more info:
  91          * http://blackfin.uclinux.org/gf/tracker/4323
  92          */
  93         bfin_write_SIC_IWR1(IWR_ENABLE(10) | IWR_ENABLE(11));
  94 #else
  95         bfin_write_SIC_IWR1(IWR_DISABLE_ALL);
  96 #endif
  97 # ifdef CONFIG_BF54x
  98         bfin_write_SIC_IWR2(IWR_DISABLE_ALL);
  99 # endif
 100 #else
 101         bfin_write_SIC_IWR(IWR_DISABLE_ALL);
 102 #endif
 103
 104         local_irq_restore(flags);
 105 }
 106
 107 int bf53x_suspend_l1_mem(unsigned char *memptr)
 108 {
 109         dma_memcpy(memptr, (const void *) L1_CODE_START, L1_CODE_LENGTH);
 110         dma_memcpy(memptr + L1_CODE_LENGTH, (const void *) L1_DATA_A_START,
 111                         L1_DATA_A_LENGTH);
 112         dma_memcpy(memptr + L1_CODE_LENGTH + L1_DATA_A_LENGTH,
 113                         (const void *) L1_DATA_B_START, L1_DATA_B_LENGTH);
 114         memcpy(memptr + L1_CODE_LENGTH + L1_DATA_A_LENGTH +
 115                         L1_DATA_B_LENGTH, (const void *) L1_SCRATCH_START,
 116                         L1_SCRATCH_LENGTH);
 117
 118         return 0;
 119 }
 120
 121 int bf53x_resume_l1_mem(unsigned char *memptr)
 122 {
 123         dma_memcpy((void *) L1_CODE_START, memptr, L1_CODE_LENGTH);
 124         dma_memcpy((void *) L1_DATA_A_START, memptr + L1_CODE_LENGTH,
 125                         L1_DATA_A_LENGTH);
 126         dma_memcpy((void *) L1_DATA_B_START, memptr + L1_CODE_LENGTH +
 127                         L1_DATA_A_LENGTH, L1_DATA_B_LENGTH);
 128         memcpy((void *) L1_SCRATCH_START, memptr + L1_CODE_LENGTH +
 129                         L1_DATA_A_LENGTH + L1_DATA_B_LENGTH, L1_SCRATCH_LENGTH);
 130
 131         return 0;
 132 }
 133
 134 #ifdef CONFIG_BFIN_WB
 135 static void flushinv_all_dcache(void)
 136 {
 137         u32 way, bank, subbank, set;
 138         u32 status, addr;
 139         u32 dmem_ctl = bfin_read_DMEM_CONTROL();
 140
 141         for (bank = 0; bank < 2; ++bank) {
 142                 if (!(dmem_ctl & (1 << (DMC1_P - bank))))
 143                         continue;
 144
 145                 for (way = 0; way < 2; ++way)
 146                         for (subbank = 0; subbank < 4; ++subbank)
 147                                 for (set = 0; set < 64; ++set) {
 148
 149                                         bfin_write_DTEST_COMMAND(
 150                                                 way << 26 |
 151                                                 bank << 23 |
 152                                                 subbank << 16 |
 153                                                 set << 5
 154                                         );
 155                                         CSYNC();
 156                                         status = bfin_read_DTEST_DATA0();
 157
 158                                         /* only worry about valid/dirty entries */
 159                                         if ((status & 0x3) != 0x3)
 160                                                 continue;
 161
 162                                         /* construct the address using the tag */
 163                                         addr = (status & 0xFFFFC800) | (subbank << 12) | (set << 5);
 164
 165                                         /* flush it */
 166                                         __asm__ __volatile__("FLUSHINV[%0];" : : "a"(addr));
 167                                 }
 168         }
 169 }
 170 #endif
 171
 172 static inline void dcache_disable(void)
 173 {
 174 #ifdef CONFIG_BFIN_DCACHE
 175         unsigned long ctrl;
 176
 177 #ifdef CONFIG_BFIN_WB
 178         flushinv_all_dcache();
 179 #endif
 180         SSYNC();
 181         ctrl = bfin_read_DMEM_CONTROL();
 182         ctrl &= ~ENDCPLB;
 183         bfin_write_DMEM_CONTROL(ctrl);
 184         SSYNC();
 185 #endif
 186 }
 187
 188 static inline void dcache_enable(void)
 189 {
 190 #ifdef CONFIG_BFIN_DCACHE
 191         unsigned long ctrl;
 192         SSYNC();
 193         ctrl = bfin_read_DMEM_CONTROL();
 194         ctrl |= ENDCPLB;
 195         bfin_write_DMEM_CONTROL(ctrl);
 196         SSYNC();
 197 #endif
 198 }
 199
 200 static inline void icache_disable(void)
 201 {
 202 #ifdef CONFIG_BFIN_ICACHE
 203         unsigned long ctrl;
 204         SSYNC();
 205         ctrl = bfin_read_IMEM_CONTROL();
 206         ctrl &= ~ENICPLB;
 207         bfin_write_IMEM_CONTROL(ctrl);
 208         SSYNC();
 209 #endif
 210 }
 211
 212 static inline void icache_enable(void)
 213 {
 214 #ifdef CONFIG_BFIN_ICACHE
 215         unsigned long ctrl;
 216         SSYNC();
 217         ctrl = bfin_read_IMEM_CONTROL();
 218         ctrl |= ENICPLB;
 219         bfin_write_IMEM_CONTROL(ctrl);
 220         SSYNC();
 221 #endif
 222 }
 223
 224 int bfin_pm_suspend_mem_enter(void)
 225 {
 226         unsigned long flags;
 227         int wakeup, ret;
 228
 229         unsigned char *memptr = kmalloc(L1_CODE_LENGTH + L1_DATA_A_LENGTH
 230                                          + L1_DATA_B_LENGTH + L1_SCRATCH_LENGTH,
 231                                           GFP_KERNEL);
 232
 233         if (memptr == NULL) {
 234                 panic("bf53x_suspend_l1_mem malloc failed");
 235                 return -ENOMEM;
 236         }
 237
 238         wakeup = bfin_read_VR_CTL() & ~FREQ;
 239         wakeup |= SCKELOW;
 240
 241 #ifdef CONFIG_PM_BFIN_WAKE_PH6
 242         wakeup |= PHYWE;
 243 #endif
 244 #ifdef CONFIG_PM_BFIN_WAKE_GP
 245         wakeup |= GPWE;
 246 #endif
 247
 248         local_irq_save(flags);
 249
 250         ret = blackfin_dma_suspend();
 251
 252         if (ret) {
 253                 local_irq_restore(flags);
 254                 kfree(memptr);
 255                 return ret;
 256         }
 257
 258         bfin_gpio_pm_hibernate_suspend();
 259
 260         dcache_disable();
 261         icache_disable();
 262         bf53x_suspend_l1_mem(memptr);
 263
 264         do_hibernate(wakeup | vr_wakeup);       /* Goodbye */
 265
 266         bf53x_resume_l1_mem(memptr);
 267
 268         icache_enable();
 269         dcache_enable();
 270
 271         bfin_gpio_pm_hibernate_restore();
 272         blackfin_dma_resume();
 273
 274         local_irq_restore(flags);
 275         kfree(memptr);
 276
 277         return 0;
 278 }
 279
 280 /*
 281  *      bfin_pm_valid - Tell the PM core that we only support the standby sleep
 282  *                      state
 283  *      @state:         suspend state we're checking.
 284  *
 285  */
 286 static int bfin_pm_valid(suspend_state_t state)
 287 {
 288         return (state == PM_SUSPEND_STANDBY
 289 #ifndef BF533_FAMILY
 290         /*
 291          * On BF533/2/1:
 292          * If we enter Hibernate the SCKE Pin is driven Low,
 293          * so that the SDRAM enters Self Refresh Mode.
 294          * However when the reset sequence that follows hibernate
 295          * state is executed, SCKE is driven High, taking the
 296          * SDRAM out of Self Refresh.
 297          *
 298          * If you reconfigure and access the SDRAM "very quickly",
 299          * you are likely to avoid errors, otherwise the SDRAM
 300          * start losing its contents.
 301          * An external HW workaround is possible using logic gates.
 302          */
 303         || state == PM_SUSPEND_MEM
 304 #endif
 305         );
 306 }
 307
 308 /*
 309  *      bfin_pm_enter - Actually enter a sleep state.
 310  *      @state:         State we're entering.
 311  *
 312  */
 313 static int bfin_pm_enter(suspend_state_t state)
 314 {
 315         switch (state) {
 316         case PM_SUSPEND_STANDBY:
 317                 bfin_pm_suspend_standby_enter();
 318                 break;
 319         case PM_SUSPEND_MEM:
 320                 bfin_pm_suspend_mem_enter();
 321                 break;
 322         default:
 323                 return -EINVAL;
 324         }
 325
 326         return 0;
 327 }
 328
 329 struct platform_suspend_ops bfin_pm_ops = {
 330         .enter = bfin_pm_enter,
 331         .valid  = bfin_pm_valid,
 332 };
 333
 334 static int __init bfin_pm_init(void)
 335 {
 336         suspend_set_ops(&bfin_pm_ops);
 337         return 0;
 338 }
 339
 340 __initcall(bfin_pm_init);