git.oblomov.eu Git - linux-2.6/blob - drivers/acpi/events/evrgnini.c

   1 /******************************************************************************
   2  *
   3  * Module Name: evrgnini- ACPI address_space (op_region) init
   4  *
   5  *****************************************************************************/
   6
   7 /*
   8  * Copyright (C) 2000 - 2006, R. Byron Moore
   9  * All rights reserved.
  10  *
  11  * Redistribution and use in source and binary forms, with or without
  12  * modification, are permitted provided that the following conditions
  13  * are met:
  14  * 1. Redistributions of source code must retain the above copyright
  15  *    notice, this list of conditions, and the following disclaimer,
  16  *    without modification.
  17  * 2. Redistributions in binary form must reproduce at minimum a disclaimer
  18  *    substantially similar to the "NO WARRANTY" disclaimer below
  19  *    ("Disclaimer") and any redistribution must be conditioned upon
  20  *    including a substantially similar Disclaimer requirement for further
  21  *    binary redistribution.
  22  * 3. Neither the names of the above-listed copyright holders nor the names
  23  *    of any contributors may be used to endorse or promote products derived
  24  *    from this software without specific prior written permission.
  25  *
  26  * Alternatively, this software may be distributed under the terms of the
  27  * GNU General Public License ("GPL") version 2 as published by the Free
  28  * Software Foundation.
  29  *
  30  * NO WARRANTY
  31  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
  32  * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
  33  * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
  34  * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
  35  * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
  36  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
  37  * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
  38  * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
  39  * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
  40  * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
  41  * POSSIBILITY OF SUCH DAMAGES.
  42  */
  43
  44 #include <acpi/acpi.h>
  45 #include <acpi/acevents.h>
  46 #include <acpi/acnamesp.h>
  47
  48 #define _COMPONENT          ACPI_EVENTS
  49 ACPI_MODULE_NAME("evrgnini")
  50
  51 /*******************************************************************************
  52  *
  53  * FUNCTION:    acpi_ev_system_memory_region_setup
  54  *
  55  * PARAMETERS:  Handle              - Region we are interested in
  56  *              Function            - Start or stop
  57  *              handler_context     - Address space handler context
  58  *              region_context      - Region specific context
  59  *
  60  * RETURN:      Status
  61  *
  62  * DESCRIPTION: Setup a system_memory operation region
  63  *
  64  ******************************************************************************/
  65 acpi_status
  66 acpi_ev_system_memory_region_setup(acpi_handle handle,
  67                                    u32 function,
  68                                    void *handler_context, void **region_context)
  69 {
  70         union acpi_operand_object *region_desc =
  71             (union acpi_operand_object *)handle;
  72         struct acpi_mem_space_context *local_region_context;
  73
  74         ACPI_FUNCTION_TRACE(ev_system_memory_region_setup);
  75
  76         if (function == ACPI_REGION_DEACTIVATE) {
  77                 if (*region_context) {
  78                         local_region_context =
  79                             (struct acpi_mem_space_context *)*region_context;
  80
  81                         /* Delete a cached mapping if present */
  82
  83                         if (local_region_context->mapped_length) {
  84                                 acpi_os_unmap_memory(local_region_context->
  85                                                      mapped_logical_address,
  86                                                      local_region_context->
  87                                                      mapped_length);
  88                         }
  89                         ACPI_FREE(local_region_context);
  90                         *region_context = NULL;
  91                 }
  92                 return_ACPI_STATUS(AE_OK);
  93         }
  94
  95         /* Create a new context */
  96
  97         local_region_context =
  98             ACPI_ALLOCATE_ZEROED(sizeof(struct acpi_mem_space_context));
  99         if (!(local_region_context)) {
 100                 return_ACPI_STATUS(AE_NO_MEMORY);
 101         }
 102
 103         /* Save the region length and address for use in the handler */
 104
 105         local_region_context->length = region_desc->region.length;
 106         local_region_context->address = region_desc->region.address;
 107
 108         *region_context = local_region_context;
 109         return_ACPI_STATUS(AE_OK);
 110 }
 111
 112 /*******************************************************************************
 113  *
 114  * FUNCTION:    acpi_ev_io_space_region_setup
 115  *
 116  * PARAMETERS:  Handle              - Region we are interested in
 117  *              Function            - Start or stop
 118  *              handler_context     - Address space handler context
 119  *              region_context      - Region specific context
 120  *
 121  * RETURN:      Status
 122  *
 123  * DESCRIPTION: Setup a IO operation region
 124  *
 125  ******************************************************************************/
 126
 127 acpi_status
 128 acpi_ev_io_space_region_setup(acpi_handle handle,
 129                               u32 function,
 130                               void *handler_context, void **region_context)
 131 {
 132         ACPI_FUNCTION_TRACE(ev_io_space_region_setup);
 133
 134         if (function == ACPI_REGION_DEACTIVATE) {
 135                 *region_context = NULL;
 136         } else {
 137                 *region_context = handler_context;
 138         }
 139
 140         return_ACPI_STATUS(AE_OK);
 141 }
 142
 143 /*******************************************************************************
 144  *
 145  * FUNCTION:    acpi_ev_pci_config_region_setup
 146  *
 147  * PARAMETERS:  Handle              - Region we are interested in
 148  *              Function            - Start or stop
 149  *              handler_context     - Address space handler context
 150  *              region_context      - Region specific context
 151  *
 152  * RETURN:      Status
 153  *
 154  * DESCRIPTION: Setup a PCI_Config operation region
 155  *
 156  * MUTEX:       Assumes namespace is not locked
 157  *
 158  ******************************************************************************/
 159
 160 acpi_status
 161 acpi_ev_pci_config_region_setup(acpi_handle handle,
 162                                 u32 function,
 163                                 void *handler_context, void **region_context)
 164 {
 165         acpi_status status = AE_OK;
 166         acpi_integer pci_value;
 167         struct acpi_pci_id *pci_id = *region_context;
 168         union acpi_operand_object *handler_obj;
 169         struct acpi_namespace_node *parent_node;
 170         struct acpi_namespace_node *pci_root_node;
 171         union acpi_operand_object *region_obj =
 172             (union acpi_operand_object *)handle;
 173         struct acpi_device_id object_hID;
 174
 175         ACPI_FUNCTION_TRACE(ev_pci_config_region_setup);
 176
 177         handler_obj = region_obj->region.handler;
 178         if (!handler_obj) {
 179                 /*
 180                  * No installed handler. This shouldn't happen because the dispatch
 181                  * routine checks before we get here, but we check again just in case.
 182                  */
 183                 ACPI_DEBUG_PRINT((ACPI_DB_OPREGION,
 184                                   "Attempting to init a region %p, with no handler\n",
 185                                   region_obj));
 186                 return_ACPI_STATUS(AE_NOT_EXIST);
 187         }
 188
 189         *region_context = NULL;
 190         if (function == ACPI_REGION_DEACTIVATE) {
 191                 if (pci_id) {
 192                         ACPI_FREE(pci_id);
 193                 }
 194                 return_ACPI_STATUS(status);
 195         }
 196
 197         parent_node = acpi_ns_get_parent_node(region_obj->region.node);
 198
 199         /*
 200          * Get the _SEG and _BBN values from the device upon which the handler
 201          * is installed.
 202          *
 203          * We need to get the _SEG and _BBN objects relative to the PCI BUS device.
 204          * This is the device the handler has been registered to handle.
 205          */
 206
 207         /*
 208          * If the address_space.Node is still pointing to the root, we need
 209          * to scan upward for a PCI Root bridge and re-associate the op_region
 210          * handlers with that device.
 211          */
 212         if (handler_obj->address_space.node == acpi_gbl_root_node) {
 213
 214                 /* Start search from the parent object */
 215
 216                 pci_root_node = parent_node;
 217                 while (pci_root_node != acpi_gbl_root_node) {
 218                         status =
 219                             acpi_ut_execute_HID(pci_root_node, &object_hID);
 220                         if (ACPI_SUCCESS(status)) {
 221                                 /*
 222                                  * Got a valid _HID string, check if this is a PCI root.
 223                                  * New for ACPI 3.0: check for a PCI Express root also.
 224                                  */
 225                                 if (!
 226                                     (ACPI_STRNCMP
 227                                      (object_hID.value, PCI_ROOT_HID_STRING,
 228                                       sizeof(PCI_ROOT_HID_STRING))
 229                                      ||
 230                                      !(ACPI_STRNCMP
 231                                        (object_hID.value,
 232                                         PCI_EXPRESS_ROOT_HID_STRING,
 233                                         sizeof(PCI_EXPRESS_ROOT_HID_STRING)))))
 234                                 {
 235
 236                                         /* Install a handler for this PCI root bridge */
 237
 238                                         status =
 239                                             acpi_install_address_space_handler((acpi_handle) pci_root_node, ACPI_ADR_SPACE_PCI_CONFIG, ACPI_DEFAULT_HANDLER, NULL, NULL);
 240                                         if (ACPI_FAILURE(status)) {
 241                                                 if (status == AE_SAME_HANDLER) {
 242                                                         /*
 243                                                          * It is OK if the handler is already installed on the root
 244                                                          * bridge.  Still need to return a context object for the
 245                                                          * new PCI_Config operation region, however.
 246                                                          */
 247                                                         status = AE_OK;
 248                                                 } else {
 249                                                         ACPI_EXCEPTION((AE_INFO,
 250                                                                         status,
 251                                                                         "Could not install PciConfig handler for Root Bridge %4.4s",
 252                                                                         acpi_ut_get_node_name
 253                                                                         (pci_root_node)));
 254                                                 }
 255                                         }
 256                                         break;
 257                                 }
 258                         }
 259
 260                         pci_root_node = acpi_ns_get_parent_node(pci_root_node);
 261                 }
 262
 263                 /* PCI root bridge not found, use namespace root node */
 264         } else {
 265                 pci_root_node = handler_obj->address_space.node;
 266         }
 267
 268         /*
 269          * If this region is now initialized, we are done.
 270          * (install_address_space_handler could have initialized it)
 271          */
 272         if (region_obj->region.flags & AOPOBJ_SETUP_COMPLETE) {
 273                 return_ACPI_STATUS(AE_OK);
 274         }
 275
 276         /* Region is still not initialized. Create a new context */
 277
 278         pci_id = ACPI_ALLOCATE_ZEROED(sizeof(struct acpi_pci_id));
 279         if (!pci_id) {
 280                 return_ACPI_STATUS(AE_NO_MEMORY);
 281         }
 282
 283         /*
 284          * For PCI_Config space access, we need the segment, bus,
 285          * device and function numbers.  Acquire them here.
 286          */
 287
 288         /*
 289          * Get the PCI device and function numbers from the _ADR object
 290          * contained in the parent's scope.
 291          */
 292         status =
 293             acpi_ut_evaluate_numeric_object(METHOD_NAME__ADR, parent_node,
 294                                             &pci_value);
 295
 296         /*
 297          * The default is zero, and since the allocation above zeroed
 298          * the data, just do nothing on failure.
 299          */
 300         if (ACPI_SUCCESS(status)) {
 301                 pci_id->device = ACPI_HIWORD(ACPI_LODWORD(pci_value));
 302                 pci_id->function = ACPI_LOWORD(ACPI_LODWORD(pci_value));
 303         }
 304
 305         /* The PCI segment number comes from the _SEG method */
 306
 307         status =
 308             acpi_ut_evaluate_numeric_object(METHOD_NAME__SEG, pci_root_node,
 309                                             &pci_value);
 310         if (ACPI_SUCCESS(status)) {
 311                 pci_id->segment = ACPI_LOWORD(pci_value);
 312         }
 313
 314         /* The PCI bus number comes from the _BBN method */
 315
 316         status =
 317             acpi_ut_evaluate_numeric_object(METHOD_NAME__BBN, pci_root_node,
 318                                             &pci_value);
 319         if (ACPI_SUCCESS(status)) {
 320                 pci_id->bus = ACPI_LOWORD(pci_value);
 321         }
 322
 323         /* Complete this device's pci_id */
 324
 325         acpi_os_derive_pci_id(pci_root_node, region_obj->region.node, &pci_id);
 326
 327         *region_context = pci_id;
 328         return_ACPI_STATUS(AE_OK);
 329 }
 330
 331 /*******************************************************************************
 332  *
 333  * FUNCTION:    acpi_ev_pci_bar_region_setup
 334  *
 335  * PARAMETERS:  Handle              - Region we are interested in
 336  *              Function            - Start or stop
 337  *              handler_context     - Address space handler context
 338  *              region_context      - Region specific context
 339  *
 340  * RETURN:      Status
 341  *
 342  * DESCRIPTION: Setup a pci_bAR operation region
 343  *
 344  * MUTEX:       Assumes namespace is not locked
 345  *
 346  ******************************************************************************/
 347
 348 acpi_status
 349 acpi_ev_pci_bar_region_setup(acpi_handle handle,
 350                              u32 function,
 351                              void *handler_context, void **region_context)
 352 {
 353         ACPI_FUNCTION_TRACE(ev_pci_bar_region_setup);
 354
 355         return_ACPI_STATUS(AE_OK);
 356 }
 357
 358 /*******************************************************************************
 359  *
 360  * FUNCTION:    acpi_ev_cmos_region_setup
 361  *
 362  * PARAMETERS:  Handle              - Region we are interested in
 363  *              Function            - Start or stop
 364  *              handler_context     - Address space handler context
 365  *              region_context      - Region specific context
 366  *
 367  * RETURN:      Status
 368  *
 369  * DESCRIPTION: Setup a CMOS operation region
 370  *
 371  * MUTEX:       Assumes namespace is not locked
 372  *
 373  ******************************************************************************/
 374
 375 acpi_status
 376 acpi_ev_cmos_region_setup(acpi_handle handle,
 377                           u32 function,
 378                           void *handler_context, void **region_context)
 379 {
 380         ACPI_FUNCTION_TRACE(ev_cmos_region_setup);
 381
 382         return_ACPI_STATUS(AE_OK);
 383 }
 384
 385 /*******************************************************************************
 386  *
 387  * FUNCTION:    acpi_ev_default_region_setup
 388  *
 389  * PARAMETERS:  Handle              - Region we are interested in
 390  *              Function            - Start or stop
 391  *              handler_context     - Address space handler context
 392  *              region_context      - Region specific context
 393  *
 394  * RETURN:      Status
 395  *
 396  * DESCRIPTION: Default region initialization
 397  *
 398  ******************************************************************************/
 399
 400 acpi_status
 401 acpi_ev_default_region_setup(acpi_handle handle,
 402                              u32 function,
 403                              void *handler_context, void **region_context)
 404 {
 405         ACPI_FUNCTION_TRACE(ev_default_region_setup);
 406
 407         if (function == ACPI_REGION_DEACTIVATE) {
 408                 *region_context = NULL;
 409         } else {
 410                 *region_context = handler_context;
 411         }
 412
 413         return_ACPI_STATUS(AE_OK);
 414 }
 415
 416 /*******************************************************************************
 417  *
 418  * FUNCTION:    acpi_ev_initialize_region
 419  *
 420  * PARAMETERS:  region_obj      - Region we are initializing
 421  *              acpi_ns_locked  - Is namespace locked?
 422  *
 423  * RETURN:      Status
 424  *
 425  * DESCRIPTION: Initializes the region, finds any _REG methods and saves them
 426  *              for execution at a later time
 427  *
 428  *              Get the appropriate address space handler for a newly
 429  *              created region.
 430  *
 431  *              This also performs address space specific initialization.  For
 432  *              example, PCI regions must have an _ADR object that contains
 433  *              a PCI address in the scope of the definition.  This address is
 434  *              required to perform an access to PCI config space.
 435  *
 436  ******************************************************************************/
 437
 438 acpi_status
 439 acpi_ev_initialize_region(union acpi_operand_object *region_obj,
 440                           u8 acpi_ns_locked)
 441 {
 442         union acpi_operand_object *handler_obj;
 443         union acpi_operand_object *obj_desc;
 444         acpi_adr_space_type space_id;
 445         struct acpi_namespace_node *node;
 446         acpi_status status;
 447         struct acpi_namespace_node *method_node;
 448         acpi_name *reg_name_ptr = (acpi_name *) METHOD_NAME__REG;
 449         union acpi_operand_object *region_obj2;
 450
 451         ACPI_FUNCTION_TRACE_U32(ev_initialize_region, acpi_ns_locked);
 452
 453         if (!region_obj) {
 454                 return_ACPI_STATUS(AE_BAD_PARAMETER);
 455         }
 456
 457         if (region_obj->common.flags & AOPOBJ_OBJECT_INITIALIZED) {
 458                 return_ACPI_STATUS(AE_OK);
 459         }
 460
 461         region_obj2 = acpi_ns_get_secondary_object(region_obj);
 462         if (!region_obj2) {
 463                 return_ACPI_STATUS(AE_NOT_EXIST);
 464         }
 465
 466         node = acpi_ns_get_parent_node(region_obj->region.node);
 467         space_id = region_obj->region.space_id;
 468
 469         /* Setup defaults */
 470
 471         region_obj->region.handler = NULL;
 472         region_obj2->extra.method_REG = NULL;
 473         region_obj->common.flags &= ~(AOPOBJ_SETUP_COMPLETE);
 474         region_obj->common.flags |= AOPOBJ_OBJECT_INITIALIZED;
 475
 476         /* Find any "_REG" method associated with this region definition */
 477
 478         status =
 479             acpi_ns_search_one_scope(*reg_name_ptr, node, ACPI_TYPE_METHOD,
 480                                      &method_node);
 481         if (ACPI_SUCCESS(status)) {
 482                 /*
 483                  * The _REG method is optional and there can be only one per region
 484                  * definition.  This will be executed when the handler is attached
 485                  * or removed
 486                  */
 487                 region_obj2->extra.method_REG = method_node;
 488         }
 489
 490         /*
 491          * The following loop depends upon the root Node having no parent
 492          * ie: acpi_gbl_root_node->parent_entry being set to NULL
 493          */
 494         while (node) {
 495
 496                 /* Check to see if a handler exists */
 497
 498                 handler_obj = NULL;
 499                 obj_desc = acpi_ns_get_attached_object(node);
 500                 if (obj_desc) {
 501
 502                         /* Can only be a handler if the object exists */
 503
 504                         switch (node->type) {
 505                         case ACPI_TYPE_DEVICE:
 506
 507                                 handler_obj = obj_desc->device.handler;
 508                                 break;
 509
 510                         case ACPI_TYPE_PROCESSOR:
 511
 512                                 handler_obj = obj_desc->processor.handler;
 513                                 break;
 514
 515                         case ACPI_TYPE_THERMAL:
 516
 517                                 handler_obj = obj_desc->thermal_zone.handler;
 518                                 break;
 519
 520                         default:
 521                                 /* Ignore other objects */
 522                                 break;
 523                         }
 524
 525                         while (handler_obj) {
 526
 527                                 /* Is this handler of the correct type? */
 528
 529                                 if (handler_obj->address_space.space_id ==
 530                                     space_id) {
 531
 532                                         /* Found correct handler */
 533
 534                                         ACPI_DEBUG_PRINT((ACPI_DB_OPREGION,
 535                                                           "Found handler %p for region %p in obj %p\n",
 536                                                           handler_obj,
 537                                                           region_obj,
 538                                                           obj_desc));
 539
 540                                         status =
 541                                             acpi_ev_attach_region(handler_obj,
 542                                                                   region_obj,
 543                                                                   acpi_ns_locked);
 544
 545                                         /*
 546                                          * Tell all users that this region is usable by running the _REG
 547                                          * method
 548                                          */
 549                                         if (acpi_ns_locked) {
 550                                                 status =
 551                                                     acpi_ut_release_mutex
 552                                                     (ACPI_MTX_NAMESPACE);
 553                                                 if (ACPI_FAILURE(status)) {
 554                                                         return_ACPI_STATUS
 555                                                             (status);
 556                                                 }
 557                                         }
 558
 559                                         status =
 560                                             acpi_ev_execute_reg_method
 561                                             (region_obj, 1);
 562
 563                                         if (acpi_ns_locked) {
 564                                                 status =
 565                                                     acpi_ut_acquire_mutex
 566                                                     (ACPI_MTX_NAMESPACE);
 567                                                 if (ACPI_FAILURE(status)) {
 568                                                         return_ACPI_STATUS
 569                                                             (status);
 570                                                 }
 571                                         }
 572
 573                                         return_ACPI_STATUS(AE_OK);
 574                                 }
 575
 576                                 /* Try next handler in the list */
 577
 578                                 handler_obj = handler_obj->address_space.next;
 579                         }
 580                 }
 581
 582                 /*
 583                  * This node does not have the handler we need;
 584                  * Pop up one level
 585                  */
 586                 node = acpi_ns_get_parent_node(node);
 587         }
 588
 589         /* If we get here, there is no handler for this region */
 590
 591         ACPI_DEBUG_PRINT((ACPI_DB_OPREGION,
 592                           "No handler for RegionType %s(%X) (RegionObj %p)\n",
 593                           acpi_ut_get_region_name(space_id), space_id,
 594                           region_obj));
 595
 596         return_ACPI_STATUS(AE_NOT_EXIST);
 597 }