Merge branch 'master' of git://git.infradead.org/users/dedekind/mtd-tests-2.6
[linux-2.6] / drivers / net / wireless / ath5k / base.c
1 /*-
2  * Copyright (c) 2002-2005 Sam Leffler, Errno Consulting
3  * Copyright (c) 2004-2005 Atheros Communications, Inc.
4  * Copyright (c) 2006 Devicescape Software, Inc.
5  * Copyright (c) 2007 Jiri Slaby <jirislaby@gmail.com>
6  * Copyright (c) 2007 Luis R. Rodriguez <mcgrof@winlab.rutgers.edu>
7  *
8  * All rights reserved.
9  *
10  * Redistribution and use in source and binary forms, with or without
11  * modification, are permitted provided that the following conditions
12  * are met:
13  * 1. Redistributions of source code must retain the above copyright
14  *    notice, this list of conditions and the following disclaimer,
15  *    without modification.
16  * 2. Redistributions in binary form must reproduce at minimum a disclaimer
17  *    similar to the "NO WARRANTY" disclaimer below ("Disclaimer") and any
18  *    redistribution must be conditioned upon including a substantially
19  *    similar Disclaimer requirement for further binary redistribution.
20  * 3. Neither the names of the above-listed copyright holders nor the names
21  *    of any contributors may be used to endorse or promote products derived
22  *    from this software without specific prior written permission.
23  *
24  * Alternatively, this software may be distributed under the terms of the
25  * GNU General Public License ("GPL") version 2 as published by the Free
26  * Software Foundation.
27  *
28  * NO WARRANTY
29  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
30  * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
31  * LIMITED TO, THE IMPLIED WARRANTIES OF NONINFRINGEMENT, MERCHANTIBILITY
32  * AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL
33  * THE COPYRIGHT HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY,
34  * OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
35  * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
36  * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER
37  * IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
38  * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF
39  * THE POSSIBILITY OF SUCH DAMAGES.
40  *
41  */
42
43 #include <linux/module.h>
44 #include <linux/delay.h>
45 #include <linux/hardirq.h>
46 #include <linux/if.h>
47 #include <linux/io.h>
48 #include <linux/netdevice.h>
49 #include <linux/cache.h>
50 #include <linux/pci.h>
51 #include <linux/ethtool.h>
52 #include <linux/uaccess.h>
53
54 #include <net/ieee80211_radiotap.h>
55
56 #include <asm/unaligned.h>
57
58 #include "base.h"
59 #include "reg.h"
60 #include "debug.h"
61
62 static int ath5k_calinterval = 10; /* Calibrate PHY every 10 secs (TODO: Fixme) */
63 static int modparam_nohwcrypt;
64 module_param_named(nohwcrypt, modparam_nohwcrypt, int, 0444);
65 MODULE_PARM_DESC(nohwcrypt, "Disable hardware encryption.");
66
67
68 /******************\
69 * Internal defines *
70 \******************/
71
72 /* Module info */
73 MODULE_AUTHOR("Jiri Slaby");
74 MODULE_AUTHOR("Nick Kossifidis");
75 MODULE_DESCRIPTION("Support for 5xxx series of Atheros 802.11 wireless LAN cards.");
76 MODULE_SUPPORTED_DEVICE("Atheros 5xxx WLAN cards");
77 MODULE_LICENSE("Dual BSD/GPL");
78 MODULE_VERSION("0.6.0 (EXPERIMENTAL)");
79
80
81 /* Known PCI ids */
82 static struct pci_device_id ath5k_pci_id_table[] __devinitdata = {
83         { PCI_VDEVICE(ATHEROS, 0x0207), .driver_data = AR5K_AR5210 }, /* 5210 early */
84         { PCI_VDEVICE(ATHEROS, 0x0007), .driver_data = AR5K_AR5210 }, /* 5210 */
85         { PCI_VDEVICE(ATHEROS, 0x0011), .driver_data = AR5K_AR5211 }, /* 5311 - this is on AHB bus !*/
86         { PCI_VDEVICE(ATHEROS, 0x0012), .driver_data = AR5K_AR5211 }, /* 5211 */
87         { PCI_VDEVICE(ATHEROS, 0x0013), .driver_data = AR5K_AR5212 }, /* 5212 */
88         { PCI_VDEVICE(3COM_2,  0x0013), .driver_data = AR5K_AR5212 }, /* 3com 5212 */
89         { PCI_VDEVICE(3COM,    0x0013), .driver_data = AR5K_AR5212 }, /* 3com 3CRDAG675 5212 */
90         { PCI_VDEVICE(ATHEROS, 0x1014), .driver_data = AR5K_AR5212 }, /* IBM minipci 5212 */
91         { PCI_VDEVICE(ATHEROS, 0x0014), .driver_data = AR5K_AR5212 }, /* 5212 combatible */
92         { PCI_VDEVICE(ATHEROS, 0x0015), .driver_data = AR5K_AR5212 }, /* 5212 combatible */
93         { PCI_VDEVICE(ATHEROS, 0x0016), .driver_data = AR5K_AR5212 }, /* 5212 combatible */
94         { PCI_VDEVICE(ATHEROS, 0x0017), .driver_data = AR5K_AR5212 }, /* 5212 combatible */
95         { PCI_VDEVICE(ATHEROS, 0x0018), .driver_data = AR5K_AR5212 }, /* 5212 combatible */
96         { PCI_VDEVICE(ATHEROS, 0x0019), .driver_data = AR5K_AR5212 }, /* 5212 combatible */
97         { PCI_VDEVICE(ATHEROS, 0x001a), .driver_data = AR5K_AR5212 }, /* 2413 Griffin-lite */
98         { PCI_VDEVICE(ATHEROS, 0x001b), .driver_data = AR5K_AR5212 }, /* 5413 Eagle */
99         { PCI_VDEVICE(ATHEROS, 0x001c), .driver_data = AR5K_AR5212 }, /* PCI-E cards */
100         { PCI_VDEVICE(ATHEROS, 0x001d), .driver_data = AR5K_AR5212 }, /* 2417 Nala */
101         { 0 }
102 };
103 MODULE_DEVICE_TABLE(pci, ath5k_pci_id_table);
104
105 /* Known SREVs */
106 static struct ath5k_srev_name srev_names[] = {
107         { "5210",       AR5K_VERSION_MAC,       AR5K_SREV_AR5210 },
108         { "5311",       AR5K_VERSION_MAC,       AR5K_SREV_AR5311 },
109         { "5311A",      AR5K_VERSION_MAC,       AR5K_SREV_AR5311A },
110         { "5311B",      AR5K_VERSION_MAC,       AR5K_SREV_AR5311B },
111         { "5211",       AR5K_VERSION_MAC,       AR5K_SREV_AR5211 },
112         { "5212",       AR5K_VERSION_MAC,       AR5K_SREV_AR5212 },
113         { "5213",       AR5K_VERSION_MAC,       AR5K_SREV_AR5213 },
114         { "5213A",      AR5K_VERSION_MAC,       AR5K_SREV_AR5213A },
115         { "2413",       AR5K_VERSION_MAC,       AR5K_SREV_AR2413 },
116         { "2414",       AR5K_VERSION_MAC,       AR5K_SREV_AR2414 },
117         { "5424",       AR5K_VERSION_MAC,       AR5K_SREV_AR5424 },
118         { "5413",       AR5K_VERSION_MAC,       AR5K_SREV_AR5413 },
119         { "5414",       AR5K_VERSION_MAC,       AR5K_SREV_AR5414 },
120         { "2415",       AR5K_VERSION_MAC,       AR5K_SREV_AR2415 },
121         { "5416",       AR5K_VERSION_MAC,       AR5K_SREV_AR5416 },
122         { "5418",       AR5K_VERSION_MAC,       AR5K_SREV_AR5418 },
123         { "2425",       AR5K_VERSION_MAC,       AR5K_SREV_AR2425 },
124         { "2417",       AR5K_VERSION_MAC,       AR5K_SREV_AR2417 },
125         { "xxxxx",      AR5K_VERSION_MAC,       AR5K_SREV_UNKNOWN },
126         { "5110",       AR5K_VERSION_RAD,       AR5K_SREV_RAD_5110 },
127         { "5111",       AR5K_VERSION_RAD,       AR5K_SREV_RAD_5111 },
128         { "5111A",      AR5K_VERSION_RAD,       AR5K_SREV_RAD_5111A },
129         { "2111",       AR5K_VERSION_RAD,       AR5K_SREV_RAD_2111 },
130         { "5112",       AR5K_VERSION_RAD,       AR5K_SREV_RAD_5112 },
131         { "5112A",      AR5K_VERSION_RAD,       AR5K_SREV_RAD_5112A },
132         { "5112B",      AR5K_VERSION_RAD,       AR5K_SREV_RAD_5112B },
133         { "2112",       AR5K_VERSION_RAD,       AR5K_SREV_RAD_2112 },
134         { "2112A",      AR5K_VERSION_RAD,       AR5K_SREV_RAD_2112A },
135         { "2112B",      AR5K_VERSION_RAD,       AR5K_SREV_RAD_2112B },
136         { "2413",       AR5K_VERSION_RAD,       AR5K_SREV_RAD_2413 },
137         { "5413",       AR5K_VERSION_RAD,       AR5K_SREV_RAD_5413 },
138         { "2316",       AR5K_VERSION_RAD,       AR5K_SREV_RAD_2316 },
139         { "2317",       AR5K_VERSION_RAD,       AR5K_SREV_RAD_2317 },
140         { "5424",       AR5K_VERSION_RAD,       AR5K_SREV_RAD_5424 },
141         { "5133",       AR5K_VERSION_RAD,       AR5K_SREV_RAD_5133 },
142         { "xxxxx",      AR5K_VERSION_RAD,       AR5K_SREV_UNKNOWN },
143 };
144
145 static struct ieee80211_rate ath5k_rates[] = {
146         { .bitrate = 10,
147           .hw_value = ATH5K_RATE_CODE_1M, },
148         { .bitrate = 20,
149           .hw_value = ATH5K_RATE_CODE_2M,
150           .hw_value_short = ATH5K_RATE_CODE_2M | AR5K_SET_SHORT_PREAMBLE,
151           .flags = IEEE80211_RATE_SHORT_PREAMBLE },
152         { .bitrate = 55,
153           .hw_value = ATH5K_RATE_CODE_5_5M,
154           .hw_value_short = ATH5K_RATE_CODE_5_5M | AR5K_SET_SHORT_PREAMBLE,
155           .flags = IEEE80211_RATE_SHORT_PREAMBLE },
156         { .bitrate = 110,
157           .hw_value = ATH5K_RATE_CODE_11M,
158           .hw_value_short = ATH5K_RATE_CODE_11M | AR5K_SET_SHORT_PREAMBLE,
159           .flags = IEEE80211_RATE_SHORT_PREAMBLE },
160         { .bitrate = 60,
161           .hw_value = ATH5K_RATE_CODE_6M,
162           .flags = 0 },
163         { .bitrate = 90,
164           .hw_value = ATH5K_RATE_CODE_9M,
165           .flags = 0 },
166         { .bitrate = 120,
167           .hw_value = ATH5K_RATE_CODE_12M,
168           .flags = 0 },
169         { .bitrate = 180,
170           .hw_value = ATH5K_RATE_CODE_18M,
171           .flags = 0 },
172         { .bitrate = 240,
173           .hw_value = ATH5K_RATE_CODE_24M,
174           .flags = 0 },
175         { .bitrate = 360,
176           .hw_value = ATH5K_RATE_CODE_36M,
177           .flags = 0 },
178         { .bitrate = 480,
179           .hw_value = ATH5K_RATE_CODE_48M,
180           .flags = 0 },
181         { .bitrate = 540,
182           .hw_value = ATH5K_RATE_CODE_54M,
183           .flags = 0 },
184         /* XR missing */
185 };
186
187 /*
188  * Prototypes - PCI stack related functions
189  */
190 static int __devinit    ath5k_pci_probe(struct pci_dev *pdev,
191                                 const struct pci_device_id *id);
192 static void __devexit   ath5k_pci_remove(struct pci_dev *pdev);
193 #ifdef CONFIG_PM
194 static int              ath5k_pci_suspend(struct pci_dev *pdev,
195                                         pm_message_t state);
196 static int              ath5k_pci_resume(struct pci_dev *pdev);
197 #else
198 #define ath5k_pci_suspend NULL
199 #define ath5k_pci_resume NULL
200 #endif /* CONFIG_PM */
201
202 static struct pci_driver ath5k_pci_driver = {
203         .name           = KBUILD_MODNAME,
204         .id_table       = ath5k_pci_id_table,
205         .probe          = ath5k_pci_probe,
206         .remove         = __devexit_p(ath5k_pci_remove),
207         .suspend        = ath5k_pci_suspend,
208         .resume         = ath5k_pci_resume,
209 };
210
211
212
213 /*
214  * Prototypes - MAC 802.11 stack related functions
215  */
216 static int ath5k_tx(struct ieee80211_hw *hw, struct sk_buff *skb);
217 static int ath5k_reset(struct ath5k_softc *sc, bool stop, bool change_channel);
218 static int ath5k_reset_wake(struct ath5k_softc *sc);
219 static int ath5k_start(struct ieee80211_hw *hw);
220 static void ath5k_stop(struct ieee80211_hw *hw);
221 static int ath5k_add_interface(struct ieee80211_hw *hw,
222                 struct ieee80211_if_init_conf *conf);
223 static void ath5k_remove_interface(struct ieee80211_hw *hw,
224                 struct ieee80211_if_init_conf *conf);
225 static int ath5k_config(struct ieee80211_hw *hw, u32 changed);
226 static int ath5k_config_interface(struct ieee80211_hw *hw,
227                 struct ieee80211_vif *vif,
228                 struct ieee80211_if_conf *conf);
229 static void ath5k_configure_filter(struct ieee80211_hw *hw,
230                 unsigned int changed_flags,
231                 unsigned int *new_flags,
232                 int mc_count, struct dev_mc_list *mclist);
233 static int ath5k_set_key(struct ieee80211_hw *hw,
234                 enum set_key_cmd cmd,
235                 const u8 *local_addr, const u8 *addr,
236                 struct ieee80211_key_conf *key);
237 static int ath5k_get_stats(struct ieee80211_hw *hw,
238                 struct ieee80211_low_level_stats *stats);
239 static int ath5k_get_tx_stats(struct ieee80211_hw *hw,
240                 struct ieee80211_tx_queue_stats *stats);
241 static u64 ath5k_get_tsf(struct ieee80211_hw *hw);
242 static void ath5k_reset_tsf(struct ieee80211_hw *hw);
243 static int ath5k_beacon_update(struct ath5k_softc *sc,
244                 struct sk_buff *skb);
245 static void ath5k_bss_info_changed(struct ieee80211_hw *hw,
246                 struct ieee80211_vif *vif,
247                 struct ieee80211_bss_conf *bss_conf,
248                 u32 changes);
249
250 static struct ieee80211_ops ath5k_hw_ops = {
251         .tx             = ath5k_tx,
252         .start          = ath5k_start,
253         .stop           = ath5k_stop,
254         .add_interface  = ath5k_add_interface,
255         .remove_interface = ath5k_remove_interface,
256         .config         = ath5k_config,
257         .config_interface = ath5k_config_interface,
258         .configure_filter = ath5k_configure_filter,
259         .set_key        = ath5k_set_key,
260         .get_stats      = ath5k_get_stats,
261         .conf_tx        = NULL,
262         .get_tx_stats   = ath5k_get_tx_stats,
263         .get_tsf        = ath5k_get_tsf,
264         .reset_tsf      = ath5k_reset_tsf,
265         .bss_info_changed = ath5k_bss_info_changed,
266 };
267
268 /*
269  * Prototypes - Internal functions
270  */
271 /* Attach detach */
272 static int      ath5k_attach(struct pci_dev *pdev,
273                         struct ieee80211_hw *hw);
274 static void     ath5k_detach(struct pci_dev *pdev,
275                         struct ieee80211_hw *hw);
276 /* Channel/mode setup */
277 static inline short ath5k_ieee2mhz(short chan);
278 static unsigned int ath5k_copy_channels(struct ath5k_hw *ah,
279                                 struct ieee80211_channel *channels,
280                                 unsigned int mode,
281                                 unsigned int max);
282 static int      ath5k_setup_bands(struct ieee80211_hw *hw);
283 static int      ath5k_chan_set(struct ath5k_softc *sc,
284                                 struct ieee80211_channel *chan);
285 static void     ath5k_setcurmode(struct ath5k_softc *sc,
286                                 unsigned int mode);
287 static void     ath5k_mode_setup(struct ath5k_softc *sc);
288
289 /* Descriptor setup */
290 static int      ath5k_desc_alloc(struct ath5k_softc *sc,
291                                 struct pci_dev *pdev);
292 static void     ath5k_desc_free(struct ath5k_softc *sc,
293                                 struct pci_dev *pdev);
294 /* Buffers setup */
295 static int      ath5k_rxbuf_setup(struct ath5k_softc *sc,
296                                 struct ath5k_buf *bf);
297 static int      ath5k_txbuf_setup(struct ath5k_softc *sc,
298                                 struct ath5k_buf *bf);
299 static inline void ath5k_txbuf_free(struct ath5k_softc *sc,
300                                 struct ath5k_buf *bf)
301 {
302         BUG_ON(!bf);
303         if (!bf->skb)
304                 return;
305         pci_unmap_single(sc->pdev, bf->skbaddr, bf->skb->len,
306                         PCI_DMA_TODEVICE);
307         dev_kfree_skb_any(bf->skb);
308         bf->skb = NULL;
309 }
310
311 /* Queues setup */
312 static struct   ath5k_txq *ath5k_txq_setup(struct ath5k_softc *sc,
313                                 int qtype, int subtype);
314 static int      ath5k_beaconq_setup(struct ath5k_hw *ah);
315 static int      ath5k_beaconq_config(struct ath5k_softc *sc);
316 static void     ath5k_txq_drainq(struct ath5k_softc *sc,
317                                 struct ath5k_txq *txq);
318 static void     ath5k_txq_cleanup(struct ath5k_softc *sc);
319 static void     ath5k_txq_release(struct ath5k_softc *sc);
320 /* Rx handling */
321 static int      ath5k_rx_start(struct ath5k_softc *sc);
322 static void     ath5k_rx_stop(struct ath5k_softc *sc);
323 static unsigned int ath5k_rx_decrypted(struct ath5k_softc *sc,
324                                         struct ath5k_desc *ds,
325                                         struct sk_buff *skb,
326                                         struct ath5k_rx_status *rs);
327 static void     ath5k_tasklet_rx(unsigned long data);
328 /* Tx handling */
329 static void     ath5k_tx_processq(struct ath5k_softc *sc,
330                                 struct ath5k_txq *txq);
331 static void     ath5k_tasklet_tx(unsigned long data);
332 /* Beacon handling */
333 static int      ath5k_beacon_setup(struct ath5k_softc *sc,
334                                         struct ath5k_buf *bf);
335 static void     ath5k_beacon_send(struct ath5k_softc *sc);
336 static void     ath5k_beacon_config(struct ath5k_softc *sc);
337 static void     ath5k_beacon_update_timers(struct ath5k_softc *sc, u64 bc_tsf);
338
339 static inline u64 ath5k_extend_tsf(struct ath5k_hw *ah, u32 rstamp)
340 {
341         u64 tsf = ath5k_hw_get_tsf64(ah);
342
343         if ((tsf & 0x7fff) < rstamp)
344                 tsf -= 0x8000;
345
346         return (tsf & ~0x7fff) | rstamp;
347 }
348
349 /* Interrupt handling */
350 static int      ath5k_init(struct ath5k_softc *sc, bool is_resume);
351 static int      ath5k_stop_locked(struct ath5k_softc *sc);
352 static int      ath5k_stop_hw(struct ath5k_softc *sc, bool is_suspend);
353 static irqreturn_t ath5k_intr(int irq, void *dev_id);
354 static void     ath5k_tasklet_reset(unsigned long data);
355
356 static void     ath5k_calibrate(unsigned long data);
357 /* LED functions */
358 static int      ath5k_init_leds(struct ath5k_softc *sc);
359 static void     ath5k_led_enable(struct ath5k_softc *sc);
360 static void     ath5k_led_off(struct ath5k_softc *sc);
361 static void     ath5k_unregister_leds(struct ath5k_softc *sc);
362
363 /*
364  * Module init/exit functions
365  */
366 static int __init
367 init_ath5k_pci(void)
368 {
369         int ret;
370
371         ath5k_debug_init();
372
373         ret = pci_register_driver(&ath5k_pci_driver);
374         if (ret) {
375                 printk(KERN_ERR "ath5k_pci: can't register pci driver\n");
376                 return ret;
377         }
378
379         return 0;
380 }
381
382 static void __exit
383 exit_ath5k_pci(void)
384 {
385         pci_unregister_driver(&ath5k_pci_driver);
386
387         ath5k_debug_finish();
388 }
389
390 module_init(init_ath5k_pci);
391 module_exit(exit_ath5k_pci);
392
393
394 /********************\
395 * PCI Initialization *
396 \********************/
397
398 static const char *
399 ath5k_chip_name(enum ath5k_srev_type type, u_int16_t val)
400 {
401         const char *name = "xxxxx";
402         unsigned int i;
403
404         for (i = 0; i < ARRAY_SIZE(srev_names); i++) {
405                 if (srev_names[i].sr_type != type)
406                         continue;
407
408                 if ((val & 0xf0) == srev_names[i].sr_val)
409                         name = srev_names[i].sr_name;
410
411                 if ((val & 0xff) == srev_names[i].sr_val) {
412                         name = srev_names[i].sr_name;
413                         break;
414                 }
415         }
416
417         return name;
418 }
419
420 static int __devinit
421 ath5k_pci_probe(struct pci_dev *pdev,
422                 const struct pci_device_id *id)
423 {
424         void __iomem *mem;
425         struct ath5k_softc *sc;
426         struct ieee80211_hw *hw;
427         int ret;
428         u8 csz;
429
430         ret = pci_enable_device(pdev);
431         if (ret) {
432                 dev_err(&pdev->dev, "can't enable device\n");
433                 goto err;
434         }
435
436         /* XXX 32-bit addressing only */
437         ret = pci_set_dma_mask(pdev, DMA_32BIT_MASK);
438         if (ret) {
439                 dev_err(&pdev->dev, "32-bit DMA not available\n");
440                 goto err_dis;
441         }
442
443         /*
444          * Cache line size is used to size and align various
445          * structures used to communicate with the hardware.
446          */
447         pci_read_config_byte(pdev, PCI_CACHE_LINE_SIZE, &csz);
448         if (csz == 0) {
449                 /*
450                  * Linux 2.4.18 (at least) writes the cache line size
451                  * register as a 16-bit wide register which is wrong.
452                  * We must have this setup properly for rx buffer
453                  * DMA to work so force a reasonable value here if it
454                  * comes up zero.
455                  */
456                 csz = L1_CACHE_BYTES / sizeof(u32);
457                 pci_write_config_byte(pdev, PCI_CACHE_LINE_SIZE, csz);
458         }
459         /*
460          * The default setting of latency timer yields poor results,
461          * set it to the value used by other systems.  It may be worth
462          * tweaking this setting more.
463          */
464         pci_write_config_byte(pdev, PCI_LATENCY_TIMER, 0xa8);
465
466         /* Enable bus mastering */
467         pci_set_master(pdev);
468
469         /*
470          * Disable the RETRY_TIMEOUT register (0x41) to keep
471          * PCI Tx retries from interfering with C3 CPU state.
472          */
473         pci_write_config_byte(pdev, 0x41, 0);
474
475         ret = pci_request_region(pdev, 0, "ath5k");
476         if (ret) {
477                 dev_err(&pdev->dev, "cannot reserve PCI memory region\n");
478                 goto err_dis;
479         }
480
481         mem = pci_iomap(pdev, 0, 0);
482         if (!mem) {
483                 dev_err(&pdev->dev, "cannot remap PCI memory region\n") ;
484                 ret = -EIO;
485                 goto err_reg;
486         }
487
488         /*
489          * Allocate hw (mac80211 main struct)
490          * and hw->priv (driver private data)
491          */
492         hw = ieee80211_alloc_hw(sizeof(*sc), &ath5k_hw_ops);
493         if (hw == NULL) {
494                 dev_err(&pdev->dev, "cannot allocate ieee80211_hw\n");
495                 ret = -ENOMEM;
496                 goto err_map;
497         }
498
499         dev_info(&pdev->dev, "registered as '%s'\n", wiphy_name(hw->wiphy));
500
501         /* Initialize driver private data */
502         SET_IEEE80211_DEV(hw, &pdev->dev);
503         hw->flags = IEEE80211_HW_RX_INCLUDES_FCS |
504                     IEEE80211_HW_SIGNAL_DBM |
505                     IEEE80211_HW_NOISE_DBM;
506
507         hw->wiphy->interface_modes =
508                 BIT(NL80211_IFTYPE_STATION) |
509                 BIT(NL80211_IFTYPE_ADHOC) |
510                 BIT(NL80211_IFTYPE_MESH_POINT);
511
512         hw->extra_tx_headroom = 2;
513         hw->channel_change_time = 5000;
514         sc = hw->priv;
515         sc->hw = hw;
516         sc->pdev = pdev;
517
518         ath5k_debug_init_device(sc);
519
520         /*
521          * Mark the device as detached to avoid processing
522          * interrupts until setup is complete.
523          */
524         __set_bit(ATH_STAT_INVALID, sc->status);
525
526         sc->iobase = mem; /* So we can unmap it on detach */
527         sc->cachelsz = csz * sizeof(u32); /* convert to bytes */
528         sc->opmode = NL80211_IFTYPE_STATION;
529         mutex_init(&sc->lock);
530         spin_lock_init(&sc->rxbuflock);
531         spin_lock_init(&sc->txbuflock);
532         spin_lock_init(&sc->block);
533
534         /* Set private data */
535         pci_set_drvdata(pdev, hw);
536
537         /* Setup interrupt handler */
538         ret = request_irq(pdev->irq, ath5k_intr, IRQF_SHARED, "ath", sc);
539         if (ret) {
540                 ATH5K_ERR(sc, "request_irq failed\n");
541                 goto err_free;
542         }
543
544         /* Initialize device */
545         sc->ah = ath5k_hw_attach(sc, id->driver_data);
546         if (IS_ERR(sc->ah)) {
547                 ret = PTR_ERR(sc->ah);
548                 goto err_irq;
549         }
550
551         /* set up multi-rate retry capabilities */
552         if (sc->ah->ah_version == AR5K_AR5212) {
553                 hw->max_rates = 4;
554                 hw->max_rate_tries = 11;
555         }
556
557         /* Finish private driver data initialization */
558         ret = ath5k_attach(pdev, hw);
559         if (ret)
560                 goto err_ah;
561
562         ATH5K_INFO(sc, "Atheros AR%s chip found (MAC: 0x%x, PHY: 0x%x)\n",
563                         ath5k_chip_name(AR5K_VERSION_MAC, sc->ah->ah_mac_srev),
564                                         sc->ah->ah_mac_srev,
565                                         sc->ah->ah_phy_revision);
566
567         if (!sc->ah->ah_single_chip) {
568                 /* Single chip radio (!RF5111) */
569                 if (sc->ah->ah_radio_5ghz_revision &&
570                         !sc->ah->ah_radio_2ghz_revision) {
571                         /* No 5GHz support -> report 2GHz radio */
572                         if (!test_bit(AR5K_MODE_11A,
573                                 sc->ah->ah_capabilities.cap_mode)) {
574                                 ATH5K_INFO(sc, "RF%s 2GHz radio found (0x%x)\n",
575                                         ath5k_chip_name(AR5K_VERSION_RAD,
576                                                 sc->ah->ah_radio_5ghz_revision),
577                                                 sc->ah->ah_radio_5ghz_revision);
578                         /* No 2GHz support (5110 and some
579                          * 5Ghz only cards) -> report 5Ghz radio */
580                         } else if (!test_bit(AR5K_MODE_11B,
581                                 sc->ah->ah_capabilities.cap_mode)) {
582                                 ATH5K_INFO(sc, "RF%s 5GHz radio found (0x%x)\n",
583                                         ath5k_chip_name(AR5K_VERSION_RAD,
584                                                 sc->ah->ah_radio_5ghz_revision),
585                                                 sc->ah->ah_radio_5ghz_revision);
586                         /* Multiband radio */
587                         } else {
588                                 ATH5K_INFO(sc, "RF%s multiband radio found"
589                                         " (0x%x)\n",
590                                         ath5k_chip_name(AR5K_VERSION_RAD,
591                                                 sc->ah->ah_radio_5ghz_revision),
592                                                 sc->ah->ah_radio_5ghz_revision);
593                         }
594                 }
595                 /* Multi chip radio (RF5111 - RF2111) ->
596                  * report both 2GHz/5GHz radios */
597                 else if (sc->ah->ah_radio_5ghz_revision &&
598                                 sc->ah->ah_radio_2ghz_revision){
599                         ATH5K_INFO(sc, "RF%s 5GHz radio found (0x%x)\n",
600                                 ath5k_chip_name(AR5K_VERSION_RAD,
601                                         sc->ah->ah_radio_5ghz_revision),
602                                         sc->ah->ah_radio_5ghz_revision);
603                         ATH5K_INFO(sc, "RF%s 2GHz radio found (0x%x)\n",
604                                 ath5k_chip_name(AR5K_VERSION_RAD,
605                                         sc->ah->ah_radio_2ghz_revision),
606                                         sc->ah->ah_radio_2ghz_revision);
607                 }
608         }
609
610
611         /* ready to process interrupts */
612         __clear_bit(ATH_STAT_INVALID, sc->status);
613
614         return 0;
615 err_ah:
616         ath5k_hw_detach(sc->ah);
617 err_irq:
618         free_irq(pdev->irq, sc);
619 err_free:
620         ieee80211_free_hw(hw);
621 err_map:
622         pci_iounmap(pdev, mem);
623 err_reg:
624         pci_release_region(pdev, 0);
625 err_dis:
626         pci_disable_device(pdev);
627 err:
628         return ret;
629 }
630
631 static void __devexit
632 ath5k_pci_remove(struct pci_dev *pdev)
633 {
634         struct ieee80211_hw *hw = pci_get_drvdata(pdev);
635         struct ath5k_softc *sc = hw->priv;
636
637         ath5k_debug_finish_device(sc);
638         ath5k_detach(pdev, hw);
639         ath5k_hw_detach(sc->ah);
640         free_irq(pdev->irq, sc);
641         pci_iounmap(pdev, sc->iobase);
642         pci_release_region(pdev, 0);
643         pci_disable_device(pdev);
644         ieee80211_free_hw(hw);
645 }
646
647 #ifdef CONFIG_PM
648 static int
649 ath5k_pci_suspend(struct pci_dev *pdev, pm_message_t state)
650 {
651         struct ieee80211_hw *hw = pci_get_drvdata(pdev);
652         struct ath5k_softc *sc = hw->priv;
653
654         ath5k_led_off(sc);
655
656         ath5k_stop_hw(sc, true);
657
658         free_irq(pdev->irq, sc);
659         pci_save_state(pdev);
660         pci_disable_device(pdev);
661         pci_set_power_state(pdev, PCI_D3hot);
662
663         return 0;
664 }
665
666 static int
667 ath5k_pci_resume(struct pci_dev *pdev)
668 {
669         struct ieee80211_hw *hw = pci_get_drvdata(pdev);
670         struct ath5k_softc *sc = hw->priv;
671         int err;
672
673         pci_restore_state(pdev);
674
675         err = pci_enable_device(pdev);
676         if (err)
677                 return err;
678
679         /*
680          * Suspend/Resume resets the PCI configuration space, so we have to
681          * re-disable the RETRY_TIMEOUT register (0x41) to keep
682          * PCI Tx retries from interfering with C3 CPU state
683          */
684         pci_write_config_byte(pdev, 0x41, 0);
685
686         err = request_irq(pdev->irq, ath5k_intr, IRQF_SHARED, "ath", sc);
687         if (err) {
688                 ATH5K_ERR(sc, "request_irq failed\n");
689                 goto err_no_irq;
690         }
691
692         err = ath5k_init(sc, true);
693         if (err)
694                 goto err_irq;
695         ath5k_led_enable(sc);
696
697         return 0;
698 err_irq:
699         free_irq(pdev->irq, sc);
700 err_no_irq:
701         pci_disable_device(pdev);
702         return err;
703 }
704 #endif /* CONFIG_PM */
705
706
707 /***********************\
708 * Driver Initialization *
709 \***********************/
710
711 static int
712 ath5k_attach(struct pci_dev *pdev, struct ieee80211_hw *hw)
713 {
714         struct ath5k_softc *sc = hw->priv;
715         struct ath5k_hw *ah = sc->ah;
716         u8 mac[ETH_ALEN] = {};
717         int ret;
718
719         ATH5K_DBG(sc, ATH5K_DEBUG_ANY, "devid 0x%x\n", pdev->device);
720
721         /*
722          * Check if the MAC has multi-rate retry support.
723          * We do this by trying to setup a fake extended
724          * descriptor.  MAC's that don't have support will
725          * return false w/o doing anything.  MAC's that do
726          * support it will return true w/o doing anything.
727          */
728         ret = ah->ah_setup_mrr_tx_desc(ah, NULL, 0, 0, 0, 0, 0, 0);
729         if (ret < 0)
730                 goto err;
731         if (ret > 0)
732                 __set_bit(ATH_STAT_MRRETRY, sc->status);
733
734         /*
735          * Collect the channel list.  The 802.11 layer
736          * is resposible for filtering this list based
737          * on settings like the phy mode and regulatory
738          * domain restrictions.
739          */
740         ret = ath5k_setup_bands(hw);
741         if (ret) {
742                 ATH5K_ERR(sc, "can't get channels\n");
743                 goto err;
744         }
745
746         /* NB: setup here so ath5k_rate_update is happy */
747         if (test_bit(AR5K_MODE_11A, ah->ah_modes))
748                 ath5k_setcurmode(sc, AR5K_MODE_11A);
749         else
750                 ath5k_setcurmode(sc, AR5K_MODE_11B);
751
752         /*
753          * Allocate tx+rx descriptors and populate the lists.
754          */
755         ret = ath5k_desc_alloc(sc, pdev);
756         if (ret) {
757                 ATH5K_ERR(sc, "can't allocate descriptors\n");
758                 goto err;
759         }
760
761         /*
762          * Allocate hardware transmit queues: one queue for
763          * beacon frames and one data queue for each QoS
764          * priority.  Note that hw functions handle reseting
765          * these queues at the needed time.
766          */
767         ret = ath5k_beaconq_setup(ah);
768         if (ret < 0) {
769                 ATH5K_ERR(sc, "can't setup a beacon xmit queue\n");
770                 goto err_desc;
771         }
772         sc->bhalq = ret;
773
774         sc->txq = ath5k_txq_setup(sc, AR5K_TX_QUEUE_DATA, AR5K_WME_AC_BK);
775         if (IS_ERR(sc->txq)) {
776                 ATH5K_ERR(sc, "can't setup xmit queue\n");
777                 ret = PTR_ERR(sc->txq);
778                 goto err_bhal;
779         }
780
781         tasklet_init(&sc->rxtq, ath5k_tasklet_rx, (unsigned long)sc);
782         tasklet_init(&sc->txtq, ath5k_tasklet_tx, (unsigned long)sc);
783         tasklet_init(&sc->restq, ath5k_tasklet_reset, (unsigned long)sc);
784         setup_timer(&sc->calib_tim, ath5k_calibrate, (unsigned long)sc);
785
786         ret = ath5k_eeprom_read_mac(ah, mac);
787         if (ret) {
788                 ATH5K_ERR(sc, "unable to read address from EEPROM: 0x%04x\n",
789                         sc->pdev->device);
790                 goto err_queues;
791         }
792
793         SET_IEEE80211_PERM_ADDR(hw, mac);
794         /* All MAC address bits matter for ACKs */
795         memset(sc->bssidmask, 0xff, ETH_ALEN);
796         ath5k_hw_set_bssid_mask(sc->ah, sc->bssidmask);
797
798         ret = ieee80211_register_hw(hw);
799         if (ret) {
800                 ATH5K_ERR(sc, "can't register ieee80211 hw\n");
801                 goto err_queues;
802         }
803
804         ath5k_init_leds(sc);
805
806         return 0;
807 err_queues:
808         ath5k_txq_release(sc);
809 err_bhal:
810         ath5k_hw_release_tx_queue(ah, sc->bhalq);
811 err_desc:
812         ath5k_desc_free(sc, pdev);
813 err:
814         return ret;
815 }
816
817 static void
818 ath5k_detach(struct pci_dev *pdev, struct ieee80211_hw *hw)
819 {
820         struct ath5k_softc *sc = hw->priv;
821
822         /*
823          * NB: the order of these is important:
824          * o call the 802.11 layer before detaching ath5k_hw to
825          *   insure callbacks into the driver to delete global
826          *   key cache entries can be handled
827          * o reclaim the tx queue data structures after calling
828          *   the 802.11 layer as we'll get called back to reclaim
829          *   node state and potentially want to use them
830          * o to cleanup the tx queues the hal is called, so detach
831          *   it last
832          * XXX: ??? detach ath5k_hw ???
833          * Other than that, it's straightforward...
834          */
835         ieee80211_unregister_hw(hw);
836         ath5k_desc_free(sc, pdev);
837         ath5k_txq_release(sc);
838         ath5k_hw_release_tx_queue(sc->ah, sc->bhalq);
839         ath5k_unregister_leds(sc);
840
841         /*
842          * NB: can't reclaim these until after ieee80211_ifdetach
843          * returns because we'll get called back to reclaim node
844          * state and potentially want to use them.
845          */
846 }
847
848
849
850
851 /********************\
852 * Channel/mode setup *
853 \********************/
854
855 /*
856  * Convert IEEE channel number to MHz frequency.
857  */
858 static inline short
859 ath5k_ieee2mhz(short chan)
860 {
861         if (chan <= 14 || chan >= 27)
862                 return ieee80211chan2mhz(chan);
863         else
864                 return 2212 + chan * 20;
865 }
866
867 static unsigned int
868 ath5k_copy_channels(struct ath5k_hw *ah,
869                 struct ieee80211_channel *channels,
870                 unsigned int mode,
871                 unsigned int max)
872 {
873         unsigned int i, count, size, chfreq, freq, ch;
874
875         if (!test_bit(mode, ah->ah_modes))
876                 return 0;
877
878         switch (mode) {
879         case AR5K_MODE_11A:
880         case AR5K_MODE_11A_TURBO:
881                 /* 1..220, but 2GHz frequencies are filtered by check_channel */
882                 size = 220 ;
883                 chfreq = CHANNEL_5GHZ;
884                 break;
885         case AR5K_MODE_11B:
886         case AR5K_MODE_11G:
887         case AR5K_MODE_11G_TURBO:
888                 size = 26;
889                 chfreq = CHANNEL_2GHZ;
890                 break;
891         default:
892                 ATH5K_WARN(ah->ah_sc, "bad mode, not copying channels\n");
893                 return 0;
894         }
895
896         for (i = 0, count = 0; i < size && max > 0; i++) {
897                 ch = i + 1 ;
898                 freq = ath5k_ieee2mhz(ch);
899
900                 /* Check if channel is supported by the chipset */
901                 if (!ath5k_channel_ok(ah, freq, chfreq))
902                         continue;
903
904                 /* Write channel info and increment counter */
905                 channels[count].center_freq = freq;
906                 channels[count].band = (chfreq == CHANNEL_2GHZ) ?
907                         IEEE80211_BAND_2GHZ : IEEE80211_BAND_5GHZ;
908                 switch (mode) {
909                 case AR5K_MODE_11A:
910                 case AR5K_MODE_11G:
911                         channels[count].hw_value = chfreq | CHANNEL_OFDM;
912                         break;
913                 case AR5K_MODE_11A_TURBO:
914                 case AR5K_MODE_11G_TURBO:
915                         channels[count].hw_value = chfreq |
916                                 CHANNEL_OFDM | CHANNEL_TURBO;
917                         break;
918                 case AR5K_MODE_11B:
919                         channels[count].hw_value = CHANNEL_B;
920                 }
921
922                 count++;
923                 max--;
924         }
925
926         return count;
927 }
928
929 static void
930 ath5k_setup_rate_idx(struct ath5k_softc *sc, struct ieee80211_supported_band *b)
931 {
932         u8 i;
933
934         for (i = 0; i < AR5K_MAX_RATES; i++)
935                 sc->rate_idx[b->band][i] = -1;
936
937         for (i = 0; i < b->n_bitrates; i++) {
938                 sc->rate_idx[b->band][b->bitrates[i].hw_value] = i;
939                 if (b->bitrates[i].hw_value_short)
940                         sc->rate_idx[b->band][b->bitrates[i].hw_value_short] = i;
941         }
942 }
943
944 static int
945 ath5k_setup_bands(struct ieee80211_hw *hw)
946 {
947         struct ath5k_softc *sc = hw->priv;
948         struct ath5k_hw *ah = sc->ah;
949         struct ieee80211_supported_band *sband;
950         int max_c, count_c = 0;
951         int i;
952
953         BUILD_BUG_ON(ARRAY_SIZE(sc->sbands) < IEEE80211_NUM_BANDS);
954         max_c = ARRAY_SIZE(sc->channels);
955
956         /* 2GHz band */
957         sband = &sc->sbands[IEEE80211_BAND_2GHZ];
958         sband->band = IEEE80211_BAND_2GHZ;
959         sband->bitrates = &sc->rates[IEEE80211_BAND_2GHZ][0];
960
961         if (test_bit(AR5K_MODE_11G, sc->ah->ah_capabilities.cap_mode)) {
962                 /* G mode */
963                 memcpy(sband->bitrates, &ath5k_rates[0],
964                        sizeof(struct ieee80211_rate) * 12);
965                 sband->n_bitrates = 12;
966
967                 sband->channels = sc->channels;
968                 sband->n_channels = ath5k_copy_channels(ah, sband->channels,
969                                         AR5K_MODE_11G, max_c);
970
971                 hw->wiphy->bands[IEEE80211_BAND_2GHZ] = sband;
972                 count_c = sband->n_channels;
973                 max_c -= count_c;
974         } else if (test_bit(AR5K_MODE_11B, sc->ah->ah_capabilities.cap_mode)) {
975                 /* B mode */
976                 memcpy(sband->bitrates, &ath5k_rates[0],
977                        sizeof(struct ieee80211_rate) * 4);
978                 sband->n_bitrates = 4;
979
980                 /* 5211 only supports B rates and uses 4bit rate codes
981                  * (e.g normally we have 0x1B for 1M, but on 5211 we have 0x0B)
982                  * fix them up here:
983                  */
984                 if (ah->ah_version == AR5K_AR5211) {
985                         for (i = 0; i < 4; i++) {
986                                 sband->bitrates[i].hw_value =
987                                         sband->bitrates[i].hw_value & 0xF;
988                                 sband->bitrates[i].hw_value_short =
989                                         sband->bitrates[i].hw_value_short & 0xF;
990                         }
991                 }
992
993                 sband->channels = sc->channels;
994                 sband->n_channels = ath5k_copy_channels(ah, sband->channels,
995                                         AR5K_MODE_11B, max_c);
996
997                 hw->wiphy->bands[IEEE80211_BAND_2GHZ] = sband;
998                 count_c = sband->n_channels;
999                 max_c -= count_c;
1000         }
1001         ath5k_setup_rate_idx(sc, sband);
1002
1003         /* 5GHz band, A mode */
1004         if (test_bit(AR5K_MODE_11A, sc->ah->ah_capabilities.cap_mode)) {
1005                 sband = &sc->sbands[IEEE80211_BAND_5GHZ];
1006                 sband->band = IEEE80211_BAND_5GHZ;
1007                 sband->bitrates = &sc->rates[IEEE80211_BAND_5GHZ][0];
1008
1009                 memcpy(sband->bitrates, &ath5k_rates[4],
1010                        sizeof(struct ieee80211_rate) * 8);
1011                 sband->n_bitrates = 8;
1012
1013                 sband->channels = &sc->channels[count_c];
1014                 sband->n_channels = ath5k_copy_channels(ah, sband->channels,
1015                                         AR5K_MODE_11A, max_c);
1016
1017                 hw->wiphy->bands[IEEE80211_BAND_5GHZ] = sband;
1018         }
1019         ath5k_setup_rate_idx(sc, sband);
1020
1021         ath5k_debug_dump_bands(sc);
1022
1023         return 0;
1024 }
1025
1026 /*
1027  * Set/change channels.  If the channel is really being changed,
1028  * it's done by reseting the chip.  To accomplish this we must
1029  * first cleanup any pending DMA, then restart stuff after a la
1030  * ath5k_init.
1031  */
1032 static int
1033 ath5k_chan_set(struct ath5k_softc *sc, struct ieee80211_channel *chan)
1034 {
1035         ATH5K_DBG(sc, ATH5K_DEBUG_RESET, "(%u MHz) -> (%u MHz)\n",
1036                 sc->curchan->center_freq, chan->center_freq);
1037
1038         if (chan->center_freq != sc->curchan->center_freq ||
1039                 chan->hw_value != sc->curchan->hw_value) {
1040
1041                 sc->curchan = chan;
1042                 sc->curband = &sc->sbands[chan->band];
1043
1044                 /*
1045                  * To switch channels clear any pending DMA operations;
1046                  * wait long enough for the RX fifo to drain, reset the
1047                  * hardware at the new frequency, and then re-enable
1048                  * the relevant bits of the h/w.
1049                  */
1050                 return ath5k_reset(sc, true, true);
1051         }
1052
1053         return 0;
1054 }
1055
1056 static void
1057 ath5k_setcurmode(struct ath5k_softc *sc, unsigned int mode)
1058 {
1059         sc->curmode = mode;
1060
1061         if (mode == AR5K_MODE_11A) {
1062                 sc->curband = &sc->sbands[IEEE80211_BAND_5GHZ];
1063         } else {
1064                 sc->curband = &sc->sbands[IEEE80211_BAND_2GHZ];
1065         }
1066 }
1067
1068 static void
1069 ath5k_mode_setup(struct ath5k_softc *sc)
1070 {
1071         struct ath5k_hw *ah = sc->ah;
1072         u32 rfilt;
1073
1074         /* configure rx filter */
1075         rfilt = sc->filter_flags;
1076         ath5k_hw_set_rx_filter(ah, rfilt);
1077
1078         if (ath5k_hw_hasbssidmask(ah))
1079                 ath5k_hw_set_bssid_mask(ah, sc->bssidmask);
1080
1081         /* configure operational mode */
1082         ath5k_hw_set_opmode(ah);
1083
1084         ath5k_hw_set_mcast_filter(ah, 0, 0);
1085         ATH5K_DBG(sc, ATH5K_DEBUG_MODE, "RX filter 0x%x\n", rfilt);
1086 }
1087
1088 static inline int
1089 ath5k_hw_to_driver_rix(struct ath5k_softc *sc, int hw_rix)
1090 {
1091         WARN_ON(hw_rix < 0 || hw_rix > AR5K_MAX_RATES);
1092         return sc->rate_idx[sc->curband->band][hw_rix];
1093 }
1094
1095 /***************\
1096 * Buffers setup *
1097 \***************/
1098
1099 static int
1100 ath5k_rxbuf_setup(struct ath5k_softc *sc, struct ath5k_buf *bf)
1101 {
1102         struct ath5k_hw *ah = sc->ah;
1103         struct sk_buff *skb = bf->skb;
1104         struct ath5k_desc *ds;
1105
1106         if (likely(skb == NULL)) {
1107                 unsigned int off;
1108
1109                 /*
1110                  * Allocate buffer with headroom_needed space for the
1111                  * fake physical layer header at the start.
1112                  */
1113                 skb = dev_alloc_skb(sc->rxbufsize + sc->cachelsz - 1);
1114                 if (unlikely(skb == NULL)) {
1115                         ATH5K_ERR(sc, "can't alloc skbuff of size %u\n",
1116                                         sc->rxbufsize + sc->cachelsz - 1);
1117                         return -ENOMEM;
1118                 }
1119                 /*
1120                  * Cache-line-align.  This is important (for the
1121                  * 5210 at least) as not doing so causes bogus data
1122                  * in rx'd frames.
1123                  */
1124                 off = ((unsigned long)skb->data) % sc->cachelsz;
1125                 if (off != 0)
1126                         skb_reserve(skb, sc->cachelsz - off);
1127
1128                 bf->skb = skb;
1129                 bf->skbaddr = pci_map_single(sc->pdev,
1130                         skb->data, sc->rxbufsize, PCI_DMA_FROMDEVICE);
1131                 if (unlikely(pci_dma_mapping_error(sc->pdev, bf->skbaddr))) {
1132                         ATH5K_ERR(sc, "%s: DMA mapping failed\n", __func__);
1133                         dev_kfree_skb(skb);
1134                         bf->skb = NULL;
1135                         return -ENOMEM;
1136                 }
1137         }
1138
1139         /*
1140          * Setup descriptors.  For receive we always terminate
1141          * the descriptor list with a self-linked entry so we'll
1142          * not get overrun under high load (as can happen with a
1143          * 5212 when ANI processing enables PHY error frames).
1144          *
1145          * To insure the last descriptor is self-linked we create
1146          * each descriptor as self-linked and add it to the end.  As
1147          * each additional descriptor is added the previous self-linked
1148          * entry is ``fixed'' naturally.  This should be safe even
1149          * if DMA is happening.  When processing RX interrupts we
1150          * never remove/process the last, self-linked, entry on the
1151          * descriptor list.  This insures the hardware always has
1152          * someplace to write a new frame.
1153          */
1154         ds = bf->desc;
1155         ds->ds_link = bf->daddr;        /* link to self */
1156         ds->ds_data = bf->skbaddr;
1157         ah->ah_setup_rx_desc(ah, ds,
1158                 skb_tailroom(skb),      /* buffer size */
1159                 0);
1160
1161         if (sc->rxlink != NULL)
1162                 *sc->rxlink = bf->daddr;
1163         sc->rxlink = &ds->ds_link;
1164         return 0;
1165 }
1166
1167 static int
1168 ath5k_txbuf_setup(struct ath5k_softc *sc, struct ath5k_buf *bf)
1169 {
1170         struct ath5k_hw *ah = sc->ah;
1171         struct ath5k_txq *txq = sc->txq;
1172         struct ath5k_desc *ds = bf->desc;
1173         struct sk_buff *skb = bf->skb;
1174         struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb);
1175         unsigned int pktlen, flags, keyidx = AR5K_TXKEYIX_INVALID;
1176         struct ieee80211_rate *rate;
1177         unsigned int mrr_rate[3], mrr_tries[3];
1178         int i, ret;
1179
1180         flags = AR5K_TXDESC_INTREQ | AR5K_TXDESC_CLRDMASK;
1181
1182         /* XXX endianness */
1183         bf->skbaddr = pci_map_single(sc->pdev, skb->data, skb->len,
1184                         PCI_DMA_TODEVICE);
1185
1186         if (info->flags & IEEE80211_TX_CTL_NO_ACK)
1187                 flags |= AR5K_TXDESC_NOACK;
1188
1189         pktlen = skb->len;
1190
1191         if (info->control.hw_key) {
1192                 keyidx = info->control.hw_key->hw_key_idx;
1193                 pktlen += info->control.hw_key->icv_len;
1194         }
1195         ret = ah->ah_setup_tx_desc(ah, ds, pktlen,
1196                 ieee80211_get_hdrlen_from_skb(skb), AR5K_PKT_TYPE_NORMAL,
1197                 (sc->power_level * 2),
1198                 ieee80211_get_tx_rate(sc->hw, info)->hw_value,
1199                 info->control.rates[0].count, keyidx, 0, flags, 0, 0);
1200         if (ret)
1201                 goto err_unmap;
1202
1203         memset(mrr_rate, 0, sizeof(mrr_rate));
1204         memset(mrr_tries, 0, sizeof(mrr_tries));
1205         for (i = 0; i < 3; i++) {
1206                 rate = ieee80211_get_alt_retry_rate(sc->hw, info, i);
1207                 if (!rate)
1208                         break;
1209
1210                 mrr_rate[i] = rate->hw_value;
1211                 mrr_tries[i] = info->control.rates[i + 1].count;
1212         }
1213
1214         ah->ah_setup_mrr_tx_desc(ah, ds,
1215                 mrr_rate[0], mrr_tries[0],
1216                 mrr_rate[1], mrr_tries[1],
1217                 mrr_rate[2], mrr_tries[2]);
1218
1219         ds->ds_link = 0;
1220         ds->ds_data = bf->skbaddr;
1221
1222         spin_lock_bh(&txq->lock);
1223         list_add_tail(&bf->list, &txq->q);
1224         sc->tx_stats[txq->qnum].len++;
1225         if (txq->link == NULL) /* is this first packet? */
1226                 ath5k_hw_set_txdp(ah, txq->qnum, bf->daddr);
1227         else /* no, so only link it */
1228                 *txq->link = bf->daddr;
1229
1230         txq->link = &ds->ds_link;
1231         ath5k_hw_start_tx_dma(ah, txq->qnum);
1232         mmiowb();
1233         spin_unlock_bh(&txq->lock);
1234
1235         return 0;
1236 err_unmap:
1237         pci_unmap_single(sc->pdev, bf->skbaddr, skb->len, PCI_DMA_TODEVICE);
1238         return ret;
1239 }
1240
1241 /*******************\
1242 * Descriptors setup *
1243 \*******************/
1244
1245 static int
1246 ath5k_desc_alloc(struct ath5k_softc *sc, struct pci_dev *pdev)
1247 {
1248         struct ath5k_desc *ds;
1249         struct ath5k_buf *bf;
1250         dma_addr_t da;
1251         unsigned int i;
1252         int ret;
1253
1254         /* allocate descriptors */
1255         sc->desc_len = sizeof(struct ath5k_desc) *
1256                         (ATH_TXBUF + ATH_RXBUF + ATH_BCBUF + 1);
1257         sc->desc = pci_alloc_consistent(pdev, sc->desc_len, &sc->desc_daddr);
1258         if (sc->desc == NULL) {
1259                 ATH5K_ERR(sc, "can't allocate descriptors\n");
1260                 ret = -ENOMEM;
1261                 goto err;
1262         }
1263         ds = sc->desc;
1264         da = sc->desc_daddr;
1265         ATH5K_DBG(sc, ATH5K_DEBUG_ANY, "DMA map: %p (%zu) -> %llx\n",
1266                 ds, sc->desc_len, (unsigned long long)sc->desc_daddr);
1267
1268         bf = kcalloc(1 + ATH_TXBUF + ATH_RXBUF + ATH_BCBUF,
1269                         sizeof(struct ath5k_buf), GFP_KERNEL);
1270         if (bf == NULL) {
1271                 ATH5K_ERR(sc, "can't allocate bufptr\n");
1272                 ret = -ENOMEM;
1273                 goto err_free;
1274         }
1275         sc->bufptr = bf;
1276
1277         INIT_LIST_HEAD(&sc->rxbuf);
1278         for (i = 0; i < ATH_RXBUF; i++, bf++, ds++, da += sizeof(*ds)) {
1279                 bf->desc = ds;
1280                 bf->daddr = da;
1281                 list_add_tail(&bf->list, &sc->rxbuf);
1282         }
1283
1284         INIT_LIST_HEAD(&sc->txbuf);
1285         sc->txbuf_len = ATH_TXBUF;
1286         for (i = 0; i < ATH_TXBUF; i++, bf++, ds++,
1287                         da += sizeof(*ds)) {
1288                 bf->desc = ds;
1289                 bf->daddr = da;
1290                 list_add_tail(&bf->list, &sc->txbuf);
1291         }
1292
1293         /* beacon buffer */
1294         bf->desc = ds;
1295         bf->daddr = da;
1296         sc->bbuf = bf;
1297
1298         return 0;
1299 err_free:
1300         pci_free_consistent(pdev, sc->desc_len, sc->desc, sc->desc_daddr);
1301 err:
1302         sc->desc = NULL;
1303         return ret;
1304 }
1305
1306 static void
1307 ath5k_desc_free(struct ath5k_softc *sc, struct pci_dev *pdev)
1308 {
1309         struct ath5k_buf *bf;
1310
1311         ath5k_txbuf_free(sc, sc->bbuf);
1312         list_for_each_entry(bf, &sc->txbuf, list)
1313                 ath5k_txbuf_free(sc, bf);
1314         list_for_each_entry(bf, &sc->rxbuf, list)
1315                 ath5k_txbuf_free(sc, bf);
1316
1317         /* Free memory associated with all descriptors */
1318         pci_free_consistent(pdev, sc->desc_len, sc->desc, sc->desc_daddr);
1319
1320         kfree(sc->bufptr);
1321         sc->bufptr = NULL;
1322 }
1323
1324
1325
1326
1327
1328 /**************\
1329 * Queues setup *
1330 \**************/
1331
1332 static struct ath5k_txq *
1333 ath5k_txq_setup(struct ath5k_softc *sc,
1334                 int qtype, int subtype)
1335 {
1336         struct ath5k_hw *ah = sc->ah;
1337         struct ath5k_txq *txq;
1338         struct ath5k_txq_info qi = {
1339                 .tqi_subtype = subtype,
1340                 .tqi_aifs = AR5K_TXQ_USEDEFAULT,
1341                 .tqi_cw_min = AR5K_TXQ_USEDEFAULT,
1342                 .tqi_cw_max = AR5K_TXQ_USEDEFAULT
1343         };
1344         int qnum;
1345
1346         /*
1347          * Enable interrupts only for EOL and DESC conditions.
1348          * We mark tx descriptors to receive a DESC interrupt
1349          * when a tx queue gets deep; otherwise waiting for the
1350          * EOL to reap descriptors.  Note that this is done to
1351          * reduce interrupt load and this only defers reaping
1352          * descriptors, never transmitting frames.  Aside from
1353          * reducing interrupts this also permits more concurrency.
1354          * The only potential downside is if the tx queue backs
1355          * up in which case the top half of the kernel may backup
1356          * due to a lack of tx descriptors.
1357          */
1358         qi.tqi_flags = AR5K_TXQ_FLAG_TXEOLINT_ENABLE |
1359                                 AR5K_TXQ_FLAG_TXDESCINT_ENABLE;
1360         qnum = ath5k_hw_setup_tx_queue(ah, qtype, &qi);
1361         if (qnum < 0) {
1362                 /*
1363                  * NB: don't print a message, this happens
1364                  * normally on parts with too few tx queues
1365                  */
1366                 return ERR_PTR(qnum);
1367         }
1368         if (qnum >= ARRAY_SIZE(sc->txqs)) {
1369                 ATH5K_ERR(sc, "hw qnum %u out of range, max %tu!\n",
1370                         qnum, ARRAY_SIZE(sc->txqs));
1371                 ath5k_hw_release_tx_queue(ah, qnum);
1372                 return ERR_PTR(-EINVAL);
1373         }
1374         txq = &sc->txqs[qnum];
1375         if (!txq->setup) {
1376                 txq->qnum = qnum;
1377                 txq->link = NULL;
1378                 INIT_LIST_HEAD(&txq->q);
1379                 spin_lock_init(&txq->lock);
1380                 txq->setup = true;
1381         }
1382         return &sc->txqs[qnum];
1383 }
1384
1385 static int
1386 ath5k_beaconq_setup(struct ath5k_hw *ah)
1387 {
1388         struct ath5k_txq_info qi = {
1389                 .tqi_aifs = AR5K_TXQ_USEDEFAULT,
1390                 .tqi_cw_min = AR5K_TXQ_USEDEFAULT,
1391                 .tqi_cw_max = AR5K_TXQ_USEDEFAULT,
1392                 /* NB: for dynamic turbo, don't enable any other interrupts */
1393                 .tqi_flags = AR5K_TXQ_FLAG_TXDESCINT_ENABLE
1394         };
1395
1396         return ath5k_hw_setup_tx_queue(ah, AR5K_TX_QUEUE_BEACON, &qi);
1397 }
1398
1399 static int
1400 ath5k_beaconq_config(struct ath5k_softc *sc)
1401 {
1402         struct ath5k_hw *ah = sc->ah;
1403         struct ath5k_txq_info qi;
1404         int ret;
1405
1406         ret = ath5k_hw_get_tx_queueprops(ah, sc->bhalq, &qi);
1407         if (ret)
1408                 return ret;
1409         if (sc->opmode == NL80211_IFTYPE_AP ||
1410                 sc->opmode == NL80211_IFTYPE_MESH_POINT) {
1411                 /*
1412                  * Always burst out beacon and CAB traffic
1413                  * (aifs = cwmin = cwmax = 0)
1414                  */
1415                 qi.tqi_aifs = 0;
1416                 qi.tqi_cw_min = 0;
1417                 qi.tqi_cw_max = 0;
1418         } else if (sc->opmode == NL80211_IFTYPE_ADHOC) {
1419                 /*
1420                  * Adhoc mode; backoff between 0 and (2 * cw_min).
1421                  */
1422                 qi.tqi_aifs = 0;
1423                 qi.tqi_cw_min = 0;
1424                 qi.tqi_cw_max = 2 * ah->ah_cw_min;
1425         }
1426
1427         ATH5K_DBG(sc, ATH5K_DEBUG_BEACON,
1428                 "beacon queueprops tqi_aifs:%d tqi_cw_min:%d tqi_cw_max:%d\n",
1429                 qi.tqi_aifs, qi.tqi_cw_min, qi.tqi_cw_max);
1430
1431         ret = ath5k_hw_set_tx_queueprops(ah, sc->bhalq, &qi);
1432         if (ret) {
1433                 ATH5K_ERR(sc, "%s: unable to update parameters for beacon "
1434                         "hardware queue!\n", __func__);
1435                 return ret;
1436         }
1437
1438         return ath5k_hw_reset_tx_queue(ah, sc->bhalq); /* push to h/w */;
1439 }
1440
1441 static void
1442 ath5k_txq_drainq(struct ath5k_softc *sc, struct ath5k_txq *txq)
1443 {
1444         struct ath5k_buf *bf, *bf0;
1445
1446         /*
1447          * NB: this assumes output has been stopped and
1448          *     we do not need to block ath5k_tx_tasklet
1449          */
1450         spin_lock_bh(&txq->lock);
1451         list_for_each_entry_safe(bf, bf0, &txq->q, list) {
1452                 ath5k_debug_printtxbuf(sc, bf);
1453
1454                 ath5k_txbuf_free(sc, bf);
1455
1456                 spin_lock_bh(&sc->txbuflock);
1457                 sc->tx_stats[txq->qnum].len--;
1458                 list_move_tail(&bf->list, &sc->txbuf);
1459                 sc->txbuf_len++;
1460                 spin_unlock_bh(&sc->txbuflock);
1461         }
1462         txq->link = NULL;
1463         spin_unlock_bh(&txq->lock);
1464 }
1465
1466 /*
1467  * Drain the transmit queues and reclaim resources.
1468  */
1469 static void
1470 ath5k_txq_cleanup(struct ath5k_softc *sc)
1471 {
1472         struct ath5k_hw *ah = sc->ah;
1473         unsigned int i;
1474
1475         /* XXX return value */
1476         if (likely(!test_bit(ATH_STAT_INVALID, sc->status))) {
1477                 /* don't touch the hardware if marked invalid */
1478                 ath5k_hw_stop_tx_dma(ah, sc->bhalq);
1479                 ATH5K_DBG(sc, ATH5K_DEBUG_RESET, "beacon queue %x\n",
1480                         ath5k_hw_get_txdp(ah, sc->bhalq));
1481                 for (i = 0; i < ARRAY_SIZE(sc->txqs); i++)
1482                         if (sc->txqs[i].setup) {
1483                                 ath5k_hw_stop_tx_dma(ah, sc->txqs[i].qnum);
1484                                 ATH5K_DBG(sc, ATH5K_DEBUG_RESET, "txq [%u] %x, "
1485                                         "link %p\n",
1486                                         sc->txqs[i].qnum,
1487                                         ath5k_hw_get_txdp(ah,
1488                                                         sc->txqs[i].qnum),
1489                                         sc->txqs[i].link);
1490                         }
1491         }
1492         ieee80211_wake_queues(sc->hw); /* XXX move to callers */
1493
1494         for (i = 0; i < ARRAY_SIZE(sc->txqs); i++)
1495                 if (sc->txqs[i].setup)
1496                         ath5k_txq_drainq(sc, &sc->txqs[i]);
1497 }
1498
1499 static void
1500 ath5k_txq_release(struct ath5k_softc *sc)
1501 {
1502         struct ath5k_txq *txq = sc->txqs;
1503         unsigned int i;
1504
1505         for (i = 0; i < ARRAY_SIZE(sc->txqs); i++, txq++)
1506                 if (txq->setup) {
1507                         ath5k_hw_release_tx_queue(sc->ah, txq->qnum);
1508                         txq->setup = false;
1509                 }
1510 }
1511
1512
1513
1514
1515 /*************\
1516 * RX Handling *
1517 \*************/
1518
1519 /*
1520  * Enable the receive h/w following a reset.
1521  */
1522 static int
1523 ath5k_rx_start(struct ath5k_softc *sc)
1524 {
1525         struct ath5k_hw *ah = sc->ah;
1526         struct ath5k_buf *bf;
1527         int ret;
1528
1529         sc->rxbufsize = roundup(IEEE80211_MAX_LEN, sc->cachelsz);
1530
1531         ATH5K_DBG(sc, ATH5K_DEBUG_RESET, "cachelsz %u rxbufsize %u\n",
1532                 sc->cachelsz, sc->rxbufsize);
1533
1534         sc->rxlink = NULL;
1535
1536         spin_lock_bh(&sc->rxbuflock);
1537         list_for_each_entry(bf, &sc->rxbuf, list) {
1538                 ret = ath5k_rxbuf_setup(sc, bf);
1539                 if (ret != 0) {
1540                         spin_unlock_bh(&sc->rxbuflock);
1541                         goto err;
1542                 }
1543         }
1544         bf = list_first_entry(&sc->rxbuf, struct ath5k_buf, list);
1545         spin_unlock_bh(&sc->rxbuflock);
1546
1547         ath5k_hw_set_rxdp(ah, bf->daddr);
1548         ath5k_hw_start_rx_dma(ah);      /* enable recv descriptors */
1549         ath5k_mode_setup(sc);           /* set filters, etc. */
1550         ath5k_hw_start_rx_pcu(ah);      /* re-enable PCU/DMA engine */
1551
1552         return 0;
1553 err:
1554         return ret;
1555 }
1556
1557 /*
1558  * Disable the receive h/w in preparation for a reset.
1559  */
1560 static void
1561 ath5k_rx_stop(struct ath5k_softc *sc)
1562 {
1563         struct ath5k_hw *ah = sc->ah;
1564
1565         ath5k_hw_stop_rx_pcu(ah);       /* disable PCU */
1566         ath5k_hw_set_rx_filter(ah, 0);  /* clear recv filter */
1567         ath5k_hw_stop_rx_dma(ah);       /* disable DMA engine */
1568
1569         ath5k_debug_printrxbuffs(sc, ah);
1570
1571         sc->rxlink = NULL;              /* just in case */
1572 }
1573
1574 static unsigned int
1575 ath5k_rx_decrypted(struct ath5k_softc *sc, struct ath5k_desc *ds,
1576                 struct sk_buff *skb, struct ath5k_rx_status *rs)
1577 {
1578         struct ieee80211_hdr *hdr = (void *)skb->data;
1579         unsigned int keyix, hlen;
1580
1581         if (!(rs->rs_status & AR5K_RXERR_DECRYPT) &&
1582                         rs->rs_keyix != AR5K_RXKEYIX_INVALID)
1583                 return RX_FLAG_DECRYPTED;
1584
1585         /* Apparently when a default key is used to decrypt the packet
1586            the hw does not set the index used to decrypt.  In such cases
1587            get the index from the packet. */
1588         hlen = ieee80211_hdrlen(hdr->frame_control);
1589         if (ieee80211_has_protected(hdr->frame_control) &&
1590             !(rs->rs_status & AR5K_RXERR_DECRYPT) &&
1591             skb->len >= hlen + 4) {
1592                 keyix = skb->data[hlen + 3] >> 6;
1593
1594                 if (test_bit(keyix, sc->keymap))
1595                         return RX_FLAG_DECRYPTED;
1596         }
1597
1598         return 0;
1599 }
1600
1601
1602 static void
1603 ath5k_check_ibss_tsf(struct ath5k_softc *sc, struct sk_buff *skb,
1604                      struct ieee80211_rx_status *rxs)
1605 {
1606         u64 tsf, bc_tstamp;
1607         u32 hw_tu;
1608         struct ieee80211_mgmt *mgmt = (struct ieee80211_mgmt *)skb->data;
1609
1610         if (ieee80211_is_beacon(mgmt->frame_control) &&
1611             le16_to_cpu(mgmt->u.beacon.capab_info) & WLAN_CAPABILITY_IBSS &&
1612             memcmp(mgmt->bssid, sc->ah->ah_bssid, ETH_ALEN) == 0) {
1613                 /*
1614                  * Received an IBSS beacon with the same BSSID. Hardware *must*
1615                  * have updated the local TSF. We have to work around various
1616                  * hardware bugs, though...
1617                  */
1618                 tsf = ath5k_hw_get_tsf64(sc->ah);
1619                 bc_tstamp = le64_to_cpu(mgmt->u.beacon.timestamp);
1620                 hw_tu = TSF_TO_TU(tsf);
1621
1622                 ATH5K_DBG_UNLIMIT(sc, ATH5K_DEBUG_BEACON,
1623                         "beacon %llx mactime %llx (diff %lld) tsf now %llx\n",
1624                         (unsigned long long)bc_tstamp,
1625                         (unsigned long long)rxs->mactime,
1626                         (unsigned long long)(rxs->mactime - bc_tstamp),
1627                         (unsigned long long)tsf);
1628
1629                 /*
1630                  * Sometimes the HW will give us a wrong tstamp in the rx
1631                  * status, causing the timestamp extension to go wrong.
1632                  * (This seems to happen especially with beacon frames bigger
1633                  * than 78 byte (incl. FCS))
1634                  * But we know that the receive timestamp must be later than the
1635                  * timestamp of the beacon since HW must have synced to that.
1636                  *
1637                  * NOTE: here we assume mactime to be after the frame was
1638                  * received, not like mac80211 which defines it at the start.
1639                  */
1640                 if (bc_tstamp > rxs->mactime) {
1641                         ATH5K_DBG_UNLIMIT(sc, ATH5K_DEBUG_BEACON,
1642                                 "fixing mactime from %llx to %llx\n",
1643                                 (unsigned long long)rxs->mactime,
1644                                 (unsigned long long)tsf);
1645                         rxs->mactime = tsf;
1646                 }
1647
1648                 /*
1649                  * Local TSF might have moved higher than our beacon timers,
1650                  * in that case we have to update them to continue sending
1651                  * beacons. This also takes care of synchronizing beacon sending
1652                  * times with other stations.
1653                  */
1654                 if (hw_tu >= sc->nexttbtt)
1655                         ath5k_beacon_update_timers(sc, bc_tstamp);
1656         }
1657 }
1658
1659
1660 static void
1661 ath5k_tasklet_rx(unsigned long data)
1662 {
1663         struct ieee80211_rx_status rxs = {};
1664         struct ath5k_rx_status rs = {};
1665         struct sk_buff *skb;
1666         struct ath5k_softc *sc = (void *)data;
1667         struct ath5k_buf *bf, *bf_last;
1668         struct ath5k_desc *ds;
1669         int ret;
1670         int hdrlen;
1671         int padsize;
1672
1673         spin_lock(&sc->rxbuflock);
1674         if (list_empty(&sc->rxbuf)) {
1675                 ATH5K_WARN(sc, "empty rx buf pool\n");
1676                 goto unlock;
1677         }
1678         bf_last = list_entry(sc->rxbuf.prev, struct ath5k_buf, list);
1679         do {
1680                 rxs.flag = 0;
1681
1682                 bf = list_first_entry(&sc->rxbuf, struct ath5k_buf, list);
1683                 BUG_ON(bf->skb == NULL);
1684                 skb = bf->skb;
1685                 ds = bf->desc;
1686
1687                 /*
1688                  * last buffer must not be freed to ensure proper hardware
1689                  * function. When the hardware finishes also a packet next to
1690                  * it, we are sure, it doesn't use it anymore and we can go on.
1691                  */
1692                 if (bf_last == bf)
1693                         bf->flags |= 1;
1694                 if (bf->flags) {
1695                         struct ath5k_buf *bf_next = list_entry(bf->list.next,
1696                                         struct ath5k_buf, list);
1697                         ret = sc->ah->ah_proc_rx_desc(sc->ah, bf_next->desc,
1698                                         &rs);
1699                         if (ret)
1700                                 break;
1701                         bf->flags &= ~1;
1702                         /* skip the overwritten one (even status is martian) */
1703                         goto next;
1704                 }
1705
1706                 ret = sc->ah->ah_proc_rx_desc(sc->ah, ds, &rs);
1707                 if (unlikely(ret == -EINPROGRESS))
1708                         break;
1709                 else if (unlikely(ret)) {
1710                         ATH5K_ERR(sc, "error in processing rx descriptor\n");
1711                         spin_unlock(&sc->rxbuflock);
1712                         return;
1713                 }
1714
1715                 if (unlikely(rs.rs_more)) {
1716                         ATH5K_WARN(sc, "unsupported jumbo\n");
1717                         goto next;
1718                 }
1719
1720                 if (unlikely(rs.rs_status)) {
1721                         if (rs.rs_status & AR5K_RXERR_PHY)
1722                                 goto next;
1723                         if (rs.rs_status & AR5K_RXERR_DECRYPT) {
1724                                 /*
1725                                  * Decrypt error.  If the error occurred
1726                                  * because there was no hardware key, then
1727                                  * let the frame through so the upper layers
1728                                  * can process it.  This is necessary for 5210
1729                                  * parts which have no way to setup a ``clear''
1730                                  * key cache entry.
1731                                  *
1732                                  * XXX do key cache faulting
1733                                  */
1734                                 if (rs.rs_keyix == AR5K_RXKEYIX_INVALID &&
1735                                     !(rs.rs_status & AR5K_RXERR_CRC))
1736                                         goto accept;
1737                         }
1738                         if (rs.rs_status & AR5K_RXERR_MIC) {
1739                                 rxs.flag |= RX_FLAG_MMIC_ERROR;
1740                                 goto accept;
1741                         }
1742
1743                         /* let crypto-error packets fall through in MNTR */
1744                         if ((rs.rs_status &
1745                                 ~(AR5K_RXERR_DECRYPT|AR5K_RXERR_MIC)) ||
1746                                         sc->opmode != NL80211_IFTYPE_MONITOR)
1747                                 goto next;
1748                 }
1749 accept:
1750                 pci_unmap_single(sc->pdev, bf->skbaddr, sc->rxbufsize,
1751                                 PCI_DMA_FROMDEVICE);
1752                 bf->skb = NULL;
1753
1754                 skb_put(skb, rs.rs_datalen);
1755
1756                 /* The MAC header is padded to have 32-bit boundary if the
1757                  * packet payload is non-zero. The general calculation for
1758                  * padsize would take into account odd header lengths:
1759                  * padsize = (4 - hdrlen % 4) % 4; However, since only
1760                  * even-length headers are used, padding can only be 0 or 2
1761                  * bytes and we can optimize this a bit. In addition, we must
1762                  * not try to remove padding from short control frames that do
1763                  * not have payload. */
1764                 hdrlen = ieee80211_get_hdrlen_from_skb(skb);
1765                 padsize = ath5k_pad_size(hdrlen);
1766                 if (padsize) {
1767                         memmove(skb->data + padsize, skb->data, hdrlen);
1768                         skb_pull(skb, padsize);
1769                 }
1770
1771                 /*
1772                  * always extend the mac timestamp, since this information is
1773                  * also needed for proper IBSS merging.
1774                  *
1775                  * XXX: it might be too late to do it here, since rs_tstamp is
1776                  * 15bit only. that means TSF extension has to be done within
1777                  * 32768usec (about 32ms). it might be necessary to move this to
1778                  * the interrupt handler, like it is done in madwifi.
1779                  *
1780                  * Unfortunately we don't know when the hardware takes the rx
1781                  * timestamp (beginning of phy frame, data frame, end of rx?).
1782                  * The only thing we know is that it is hardware specific...
1783                  * On AR5213 it seems the rx timestamp is at the end of the
1784                  * frame, but i'm not sure.
1785                  *
1786                  * NOTE: mac80211 defines mactime at the beginning of the first
1787                  * data symbol. Since we don't have any time references it's
1788                  * impossible to comply to that. This affects IBSS merge only
1789                  * right now, so it's not too bad...
1790                  */
1791                 rxs.mactime = ath5k_extend_tsf(sc->ah, rs.rs_tstamp);
1792                 rxs.flag |= RX_FLAG_TSFT;
1793
1794                 rxs.freq = sc->curchan->center_freq;
1795                 rxs.band = sc->curband->band;
1796
1797                 rxs.noise = sc->ah->ah_noise_floor;
1798                 rxs.signal = rxs.noise + rs.rs_rssi;
1799
1800                 /* An rssi of 35 indicates you should be able use
1801                  * 54 Mbps reliably. A more elaborate scheme can be used
1802                  * here but it requires a map of SNR/throughput for each
1803                  * possible mode used */
1804                 rxs.qual = rs.rs_rssi * 100 / 35;
1805
1806                 /* rssi can be more than 35 though, anything above that
1807                  * should be considered at 100% */
1808                 if (rxs.qual > 100)
1809                         rxs.qual = 100;
1810
1811                 rxs.antenna = rs.rs_antenna;
1812                 rxs.rate_idx = ath5k_hw_to_driver_rix(sc, rs.rs_rate);
1813                 rxs.flag |= ath5k_rx_decrypted(sc, ds, skb, &rs);
1814
1815                 if (rxs.rate_idx >= 0 && rs.rs_rate ==
1816                     sc->curband->bitrates[rxs.rate_idx].hw_value_short)
1817                         rxs.flag |= RX_FLAG_SHORTPRE;
1818
1819                 ath5k_debug_dump_skb(sc, skb, "RX  ", 0);
1820
1821                 /* check beacons in IBSS mode */
1822                 if (sc->opmode == NL80211_IFTYPE_ADHOC)
1823                         ath5k_check_ibss_tsf(sc, skb, &rxs);
1824
1825                 __ieee80211_rx(sc->hw, skb, &rxs);
1826 next:
1827                 list_move_tail(&bf->list, &sc->rxbuf);
1828         } while (ath5k_rxbuf_setup(sc, bf) == 0);
1829 unlock:
1830         spin_unlock(&sc->rxbuflock);
1831 }
1832
1833
1834
1835
1836 /*************\
1837 * TX Handling *
1838 \*************/
1839
1840 static void
1841 ath5k_tx_processq(struct ath5k_softc *sc, struct ath5k_txq *txq)
1842 {
1843         struct ath5k_tx_status ts = {};
1844         struct ath5k_buf *bf, *bf0;
1845         struct ath5k_desc *ds;
1846         struct sk_buff *skb;
1847         struct ieee80211_tx_info *info;
1848         int i, ret;
1849
1850         spin_lock(&txq->lock);
1851         list_for_each_entry_safe(bf, bf0, &txq->q, list) {
1852                 ds = bf->desc;
1853
1854                 ret = sc->ah->ah_proc_tx_desc(sc->ah, ds, &ts);
1855                 if (unlikely(ret == -EINPROGRESS))
1856                         break;
1857                 else if (unlikely(ret)) {
1858                         ATH5K_ERR(sc, "error %d while processing queue %u\n",
1859                                 ret, txq->qnum);
1860                         break;
1861                 }
1862
1863                 skb = bf->skb;
1864                 info = IEEE80211_SKB_CB(skb);
1865                 bf->skb = NULL;
1866
1867                 pci_unmap_single(sc->pdev, bf->skbaddr, skb->len,
1868                                 PCI_DMA_TODEVICE);
1869
1870                 ieee80211_tx_info_clear_status(info);
1871                 for (i = 0; i < 4; i++) {
1872                         struct ieee80211_tx_rate *r =
1873                                 &info->status.rates[i];
1874
1875                         if (ts.ts_rate[i]) {
1876                                 r->idx = ath5k_hw_to_driver_rix(sc, ts.ts_rate[i]);
1877                                 r->count = ts.ts_retry[i];
1878                         } else {
1879                                 r->idx = -1;
1880                                 r->count = 0;
1881                         }
1882                 }
1883
1884                 /* count the successful attempt as well */
1885                 info->status.rates[ts.ts_final_idx].count++;
1886
1887                 if (unlikely(ts.ts_status)) {
1888                         sc->ll_stats.dot11ACKFailureCount++;
1889                         if (ts.ts_status & AR5K_TXERR_FILT)
1890                                 info->flags |= IEEE80211_TX_STAT_TX_FILTERED;
1891                 } else {
1892                         info->flags |= IEEE80211_TX_STAT_ACK;
1893                         info->status.ack_signal = ts.ts_rssi;
1894                 }
1895
1896                 ieee80211_tx_status(sc->hw, skb);
1897                 sc->tx_stats[txq->qnum].count++;
1898
1899                 spin_lock(&sc->txbuflock);
1900                 sc->tx_stats[txq->qnum].len--;
1901                 list_move_tail(&bf->list, &sc->txbuf);
1902                 sc->txbuf_len++;
1903                 spin_unlock(&sc->txbuflock);
1904         }
1905         if (likely(list_empty(&txq->q)))
1906                 txq->link = NULL;
1907         spin_unlock(&txq->lock);
1908         if (sc->txbuf_len > ATH_TXBUF / 5)
1909                 ieee80211_wake_queues(sc->hw);
1910 }
1911
1912 static void
1913 ath5k_tasklet_tx(unsigned long data)
1914 {
1915         struct ath5k_softc *sc = (void *)data;
1916
1917         ath5k_tx_processq(sc, sc->txq);
1918 }
1919
1920
1921 /*****************\
1922 * Beacon handling *
1923 \*****************/
1924
1925 /*
1926  * Setup the beacon frame for transmit.
1927  */
1928 static int
1929 ath5k_beacon_setup(struct ath5k_softc *sc, struct ath5k_buf *bf)
1930 {
1931         struct sk_buff *skb = bf->skb;
1932         struct  ieee80211_tx_info *info = IEEE80211_SKB_CB(skb);
1933         struct ath5k_hw *ah = sc->ah;
1934         struct ath5k_desc *ds;
1935         int ret, antenna = 0;
1936         u32 flags;
1937
1938         bf->skbaddr = pci_map_single(sc->pdev, skb->data, skb->len,
1939                         PCI_DMA_TODEVICE);
1940         ATH5K_DBG(sc, ATH5K_DEBUG_BEACON, "skb %p [data %p len %u] "
1941                         "skbaddr %llx\n", skb, skb->data, skb->len,
1942                         (unsigned long long)bf->skbaddr);
1943         if (pci_dma_mapping_error(sc->pdev, bf->skbaddr)) {
1944                 ATH5K_ERR(sc, "beacon DMA mapping failed\n");
1945                 return -EIO;
1946         }
1947
1948         ds = bf->desc;
1949
1950         flags = AR5K_TXDESC_NOACK;
1951         if (sc->opmode == NL80211_IFTYPE_ADHOC && ath5k_hw_hasveol(ah)) {
1952                 ds->ds_link = bf->daddr;        /* self-linked */
1953                 flags |= AR5K_TXDESC_VEOL;
1954                 /*
1955                  * Let hardware handle antenna switching if txantenna is not set
1956                  */
1957         } else {
1958                 ds->ds_link = 0;
1959                 /*
1960                  * Switch antenna every 4 beacons if txantenna is not set
1961                  * XXX assumes two antennas
1962                  */
1963                 if (antenna == 0)
1964                         antenna = sc->bsent & 4 ? 2 : 1;
1965         }
1966
1967         ds->ds_data = bf->skbaddr;
1968         ret = ah->ah_setup_tx_desc(ah, ds, skb->len,
1969                         ieee80211_get_hdrlen_from_skb(skb),
1970                         AR5K_PKT_TYPE_BEACON, (sc->power_level * 2),
1971                         ieee80211_get_tx_rate(sc->hw, info)->hw_value,
1972                         1, AR5K_TXKEYIX_INVALID,
1973                         antenna, flags, 0, 0);
1974         if (ret)
1975                 goto err_unmap;
1976
1977         return 0;
1978 err_unmap:
1979         pci_unmap_single(sc->pdev, bf->skbaddr, skb->len, PCI_DMA_TODEVICE);
1980         return ret;
1981 }
1982
1983 /*
1984  * Transmit a beacon frame at SWBA.  Dynamic updates to the
1985  * frame contents are done as needed and the slot time is
1986  * also adjusted based on current state.
1987  *
1988  * this is usually called from interrupt context (ath5k_intr())
1989  * but also from ath5k_beacon_config() in IBSS mode which in turn
1990  * can be called from a tasklet and user context
1991  */
1992 static void
1993 ath5k_beacon_send(struct ath5k_softc *sc)
1994 {
1995         struct ath5k_buf *bf = sc->bbuf;
1996         struct ath5k_hw *ah = sc->ah;
1997
1998         ATH5K_DBG_UNLIMIT(sc, ATH5K_DEBUG_BEACON, "in beacon_send\n");
1999
2000         if (unlikely(bf->skb == NULL || sc->opmode == NL80211_IFTYPE_STATION ||
2001                         sc->opmode == NL80211_IFTYPE_MONITOR)) {
2002                 ATH5K_WARN(sc, "bf=%p bf_skb=%p\n", bf, bf ? bf->skb : NULL);
2003                 return;
2004         }
2005         /*
2006          * Check if the previous beacon has gone out.  If
2007          * not don't don't try to post another, skip this
2008          * period and wait for the next.  Missed beacons
2009          * indicate a problem and should not occur.  If we
2010          * miss too many consecutive beacons reset the device.
2011          */
2012         if (unlikely(ath5k_hw_num_tx_pending(ah, sc->bhalq) != 0)) {
2013                 sc->bmisscount++;
2014                 ATH5K_DBG(sc, ATH5K_DEBUG_BEACON,
2015                         "missed %u consecutive beacons\n", sc->bmisscount);
2016                 if (sc->bmisscount > 3) {               /* NB: 3 is a guess */
2017                         ATH5K_DBG(sc, ATH5K_DEBUG_BEACON,
2018                                 "stuck beacon time (%u missed)\n",
2019                                 sc->bmisscount);
2020                         tasklet_schedule(&sc->restq);
2021                 }
2022                 return;
2023         }
2024         if (unlikely(sc->bmisscount != 0)) {
2025                 ATH5K_DBG(sc, ATH5K_DEBUG_BEACON,
2026                         "resume beacon xmit after %u misses\n",
2027                         sc->bmisscount);
2028                 sc->bmisscount = 0;
2029         }
2030
2031         /*
2032          * Stop any current dma and put the new frame on the queue.
2033          * This should never fail since we check above that no frames
2034          * are still pending on the queue.
2035          */
2036         if (unlikely(ath5k_hw_stop_tx_dma(ah, sc->bhalq))) {
2037                 ATH5K_WARN(sc, "beacon queue %u didn't stop?\n", sc->bhalq);
2038                 /* NB: hw still stops DMA, so proceed */
2039         }
2040
2041         ath5k_hw_set_txdp(ah, sc->bhalq, bf->daddr);
2042         ath5k_hw_start_tx_dma(ah, sc->bhalq);
2043         ATH5K_DBG(sc, ATH5K_DEBUG_BEACON, "TXDP[%u] = %llx (%p)\n",
2044                 sc->bhalq, (unsigned long long)bf->daddr, bf->desc);
2045
2046         sc->bsent++;
2047 }
2048
2049
2050 /**
2051  * ath5k_beacon_update_timers - update beacon timers
2052  *
2053  * @sc: struct ath5k_softc pointer we are operating on
2054  * @bc_tsf: the timestamp of the beacon. 0 to reset the TSF. -1 to perform a
2055  *          beacon timer update based on the current HW TSF.
2056  *
2057  * Calculate the next target beacon transmit time (TBTT) based on the timestamp
2058  * of a received beacon or the current local hardware TSF and write it to the
2059  * beacon timer registers.
2060  *
2061  * This is called in a variety of situations, e.g. when a beacon is received,
2062  * when a TSF update has been detected, but also when an new IBSS is created or
2063  * when we otherwise know we have to update the timers, but we keep it in this
2064  * function to have it all together in one place.
2065  */
2066 static void
2067 ath5k_beacon_update_timers(struct ath5k_softc *sc, u64 bc_tsf)
2068 {
2069         struct ath5k_hw *ah = sc->ah;
2070         u32 nexttbtt, intval, hw_tu, bc_tu;
2071         u64 hw_tsf;
2072
2073         intval = sc->bintval & AR5K_BEACON_PERIOD;
2074         if (WARN_ON(!intval))
2075                 return;
2076
2077         /* beacon TSF converted to TU */
2078         bc_tu = TSF_TO_TU(bc_tsf);
2079
2080         /* current TSF converted to TU */
2081         hw_tsf = ath5k_hw_get_tsf64(ah);
2082         hw_tu = TSF_TO_TU(hw_tsf);
2083
2084 #define FUDGE 3
2085         /* we use FUDGE to make sure the next TBTT is ahead of the current TU */
2086         if (bc_tsf == -1) {
2087                 /*
2088                  * no beacons received, called internally.
2089                  * just need to refresh timers based on HW TSF.
2090                  */
2091                 nexttbtt = roundup(hw_tu + FUDGE, intval);
2092         } else if (bc_tsf == 0) {
2093                 /*
2094                  * no beacon received, probably called by ath5k_reset_tsf().
2095                  * reset TSF to start with 0.
2096                  */
2097                 nexttbtt = intval;
2098                 intval |= AR5K_BEACON_RESET_TSF;
2099         } else if (bc_tsf > hw_tsf) {
2100                 /*
2101                  * beacon received, SW merge happend but HW TSF not yet updated.
2102                  * not possible to reconfigure timers yet, but next time we
2103                  * receive a beacon with the same BSSID, the hardware will
2104                  * automatically update the TSF and then we need to reconfigure
2105                  * the timers.
2106                  */
2107                 ATH5K_DBG_UNLIMIT(sc, ATH5K_DEBUG_BEACON,
2108                         "need to wait for HW TSF sync\n");
2109                 return;
2110         } else {
2111                 /*
2112                  * most important case for beacon synchronization between STA.
2113                  *
2114                  * beacon received and HW TSF has been already updated by HW.
2115                  * update next TBTT based on the TSF of the beacon, but make
2116                  * sure it is ahead of our local TSF timer.
2117                  */
2118                 nexttbtt = bc_tu + roundup(hw_tu + FUDGE - bc_tu, intval);
2119         }
2120 #undef FUDGE
2121
2122         sc->nexttbtt = nexttbtt;
2123
2124         intval |= AR5K_BEACON_ENA;
2125         ath5k_hw_init_beacon(ah, nexttbtt, intval);
2126
2127         /*
2128          * debugging output last in order to preserve the time critical aspect
2129          * of this function
2130          */
2131         if (bc_tsf == -1)
2132                 ATH5K_DBG_UNLIMIT(sc, ATH5K_DEBUG_BEACON,
2133                         "reconfigured timers based on HW TSF\n");
2134         else if (bc_tsf == 0)
2135                 ATH5K_DBG_UNLIMIT(sc, ATH5K_DEBUG_BEACON,
2136                         "reset HW TSF and timers\n");
2137         else
2138                 ATH5K_DBG_UNLIMIT(sc, ATH5K_DEBUG_BEACON,
2139                         "updated timers based on beacon TSF\n");
2140
2141         ATH5K_DBG_UNLIMIT(sc, ATH5K_DEBUG_BEACON,
2142                           "bc_tsf %llx hw_tsf %llx bc_tu %u hw_tu %u nexttbtt %u\n",
2143                           (unsigned long long) bc_tsf,
2144                           (unsigned long long) hw_tsf, bc_tu, hw_tu, nexttbtt);
2145         ATH5K_DBG_UNLIMIT(sc, ATH5K_DEBUG_BEACON, "intval %u %s %s\n",
2146                 intval & AR5K_BEACON_PERIOD,
2147                 intval & AR5K_BEACON_ENA ? "AR5K_BEACON_ENA" : "",
2148                 intval & AR5K_BEACON_RESET_TSF ? "AR5K_BEACON_RESET_TSF" : "");
2149 }
2150
2151
2152 /**
2153  * ath5k_beacon_config - Configure the beacon queues and interrupts
2154  *
2155  * @sc: struct ath5k_softc pointer we are operating on
2156  *
2157  * When operating in station mode we want to receive a BMISS interrupt when we
2158  * stop seeing beacons from the AP we've associated with so we can look for
2159  * another AP to associate with.
2160  *
2161  * In IBSS mode we use a self-linked tx descriptor if possible. We enable SWBA
2162  * interrupts to detect TSF updates only.
2163  */
2164 static void
2165 ath5k_beacon_config(struct ath5k_softc *sc)
2166 {
2167         struct ath5k_hw *ah = sc->ah;
2168
2169         ath5k_hw_set_imr(ah, 0);
2170         sc->bmisscount = 0;
2171         sc->imask &= ~(AR5K_INT_BMISS | AR5K_INT_SWBA);
2172
2173         if (sc->opmode == NL80211_IFTYPE_STATION) {
2174                 sc->imask |= AR5K_INT_BMISS;
2175         } else if (sc->opmode == NL80211_IFTYPE_ADHOC ||
2176                         sc->opmode == NL80211_IFTYPE_MESH_POINT ||
2177                         sc->opmode == NL80211_IFTYPE_AP) {
2178                 /*
2179                  * In IBSS mode we use a self-linked tx descriptor and let the
2180                  * hardware send the beacons automatically. We have to load it
2181                  * only once here.
2182                  * We use the SWBA interrupt only to keep track of the beacon
2183                  * timers in order to detect automatic TSF updates.
2184                  */
2185                 ath5k_beaconq_config(sc);
2186
2187                 sc->imask |= AR5K_INT_SWBA;
2188
2189                 if (sc->opmode == NL80211_IFTYPE_ADHOC) {
2190                         if (ath5k_hw_hasveol(ah)) {
2191                                 spin_lock(&sc->block);
2192                                 ath5k_beacon_send(sc);
2193                                 spin_unlock(&sc->block);
2194                         }
2195                 } else
2196                         ath5k_beacon_update_timers(sc, -1);
2197         }
2198
2199         ath5k_hw_set_imr(ah, sc->imask);
2200 }
2201
2202
2203 /********************\
2204 * Interrupt handling *
2205 \********************/
2206
2207 static int
2208 ath5k_init(struct ath5k_softc *sc, bool is_resume)
2209 {
2210         struct ath5k_hw *ah = sc->ah;
2211         int ret, i;
2212
2213         mutex_lock(&sc->lock);
2214
2215         if (is_resume && !test_bit(ATH_STAT_STARTED, sc->status))
2216                 goto out_ok;
2217
2218         __clear_bit(ATH_STAT_STARTED, sc->status);
2219
2220         ATH5K_DBG(sc, ATH5K_DEBUG_RESET, "mode %d\n", sc->opmode);
2221
2222         /*
2223          * Stop anything previously setup.  This is safe
2224          * no matter this is the first time through or not.
2225          */
2226         ath5k_stop_locked(sc);
2227
2228         /*
2229          * The basic interface to setting the hardware in a good
2230          * state is ``reset''.  On return the hardware is known to
2231          * be powered up and with interrupts disabled.  This must
2232          * be followed by initialization of the appropriate bits
2233          * and then setup of the interrupt mask.
2234          */
2235         sc->curchan = sc->hw->conf.channel;
2236         sc->curband = &sc->sbands[sc->curchan->band];
2237         sc->imask = AR5K_INT_RXOK | AR5K_INT_RXERR | AR5K_INT_RXEOL |
2238                 AR5K_INT_RXORN | AR5K_INT_TXDESC | AR5K_INT_TXEOL |
2239                 AR5K_INT_FATAL | AR5K_INT_GLOBAL | AR5K_INT_MIB;
2240         ret = ath5k_reset(sc, false, false);
2241         if (ret)
2242                 goto done;
2243
2244         /*
2245          * Reset the key cache since some parts do not reset the
2246          * contents on initial power up or resume from suspend.
2247          */
2248         for (i = 0; i < AR5K_KEYTABLE_SIZE; i++)
2249                 ath5k_hw_reset_key(ah, i);
2250
2251         __set_bit(ATH_STAT_STARTED, sc->status);
2252
2253         /* Set ack to be sent at low bit-rates */
2254         ath5k_hw_set_ack_bitrate_high(ah, false);
2255
2256         mod_timer(&sc->calib_tim, round_jiffies(jiffies +
2257                         msecs_to_jiffies(ath5k_calinterval * 1000)));
2258
2259 out_ok:
2260         ret = 0;
2261 done:
2262         mmiowb();
2263         mutex_unlock(&sc->lock);
2264         return ret;
2265 }
2266
2267 static int
2268 ath5k_stop_locked(struct ath5k_softc *sc)
2269 {
2270         struct ath5k_hw *ah = sc->ah;
2271
2272         ATH5K_DBG(sc, ATH5K_DEBUG_RESET, "invalid %u\n",
2273                         test_bit(ATH_STAT_INVALID, sc->status));
2274
2275         /*
2276          * Shutdown the hardware and driver:
2277          *    stop output from above
2278          *    disable interrupts
2279          *    turn off timers
2280          *    turn off the radio
2281          *    clear transmit machinery
2282          *    clear receive machinery
2283          *    drain and release tx queues
2284          *    reclaim beacon resources
2285          *    power down hardware
2286          *
2287          * Note that some of this work is not possible if the
2288          * hardware is gone (invalid).
2289          */
2290         ieee80211_stop_queues(sc->hw);
2291
2292         if (!test_bit(ATH_STAT_INVALID, sc->status)) {
2293                 ath5k_led_off(sc);
2294                 ath5k_hw_set_imr(ah, 0);
2295                 synchronize_irq(sc->pdev->irq);
2296         }
2297         ath5k_txq_cleanup(sc);
2298         if (!test_bit(ATH_STAT_INVALID, sc->status)) {
2299                 ath5k_rx_stop(sc);
2300                 ath5k_hw_phy_disable(ah);
2301         } else
2302                 sc->rxlink = NULL;
2303
2304         return 0;
2305 }
2306
2307 /*
2308  * Stop the device, grabbing the top-level lock to protect
2309  * against concurrent entry through ath5k_init (which can happen
2310  * if another thread does a system call and the thread doing the
2311  * stop is preempted).
2312  */
2313 static int
2314 ath5k_stop_hw(struct ath5k_softc *sc, bool is_suspend)
2315 {
2316         int ret;
2317
2318         mutex_lock(&sc->lock);
2319         ret = ath5k_stop_locked(sc);
2320         if (ret == 0 && !test_bit(ATH_STAT_INVALID, sc->status)) {
2321                 /*
2322                  * Set the chip in full sleep mode.  Note that we are
2323                  * careful to do this only when bringing the interface
2324                  * completely to a stop.  When the chip is in this state
2325                  * it must be carefully woken up or references to
2326                  * registers in the PCI clock domain may freeze the bus
2327                  * (and system).  This varies by chip and is mostly an
2328                  * issue with newer parts that go to sleep more quickly.
2329                  */
2330                 if (sc->ah->ah_mac_srev >= 0x78) {
2331                         /*
2332                          * XXX
2333                          * don't put newer MAC revisions > 7.8 to sleep because
2334                          * of the above mentioned problems
2335                          */
2336                         ATH5K_DBG(sc, ATH5K_DEBUG_RESET, "mac version > 7.8, "
2337                                 "not putting device to sleep\n");
2338                 } else {
2339                         ATH5K_DBG(sc, ATH5K_DEBUG_RESET,
2340                                 "putting device to full sleep\n");
2341                         ath5k_hw_set_power(sc->ah, AR5K_PM_FULL_SLEEP, true, 0);
2342                 }
2343         }
2344         ath5k_txbuf_free(sc, sc->bbuf);
2345         if (!is_suspend)
2346                 __clear_bit(ATH_STAT_STARTED, sc->status);
2347
2348         mmiowb();
2349         mutex_unlock(&sc->lock);
2350
2351         del_timer_sync(&sc->calib_tim);
2352         tasklet_kill(&sc->rxtq);
2353         tasklet_kill(&sc->txtq);
2354         tasklet_kill(&sc->restq);
2355
2356         return ret;
2357 }
2358
2359 static irqreturn_t
2360 ath5k_intr(int irq, void *dev_id)
2361 {
2362         struct ath5k_softc *sc = dev_id;
2363         struct ath5k_hw *ah = sc->ah;
2364         enum ath5k_int status;
2365         unsigned int counter = 1000;
2366
2367         if (unlikely(test_bit(ATH_STAT_INVALID, sc->status) ||
2368                                 !ath5k_hw_is_intr_pending(ah)))
2369                 return IRQ_NONE;
2370
2371         do {
2372                 /*
2373                  * Figure out the reason(s) for the interrupt.  Note
2374                  * that get_isr returns a pseudo-ISR that may include
2375                  * bits we haven't explicitly enabled so we mask the
2376                  * value to insure we only process bits we requested.
2377                  */
2378                 ath5k_hw_get_isr(ah, &status);          /* NB: clears IRQ too */
2379                 ATH5K_DBG(sc, ATH5K_DEBUG_INTR, "status 0x%x/0x%x\n",
2380                                 status, sc->imask);
2381                 status &= sc->imask; /* discard unasked for bits */
2382                 if (unlikely(status & AR5K_INT_FATAL)) {
2383                         /*
2384                          * Fatal errors are unrecoverable.
2385                          * Typically these are caused by DMA errors.
2386                          */
2387                         tasklet_schedule(&sc->restq);
2388                 } else if (unlikely(status & AR5K_INT_RXORN)) {
2389                         tasklet_schedule(&sc->restq);
2390                 } else {
2391                         if (status & AR5K_INT_SWBA) {
2392                                 /*
2393                                 * Software beacon alert--time to send a beacon.
2394                                 * Handle beacon transmission directly; deferring
2395                                 * this is too slow to meet timing constraints
2396                                 * under load.
2397                                 *
2398                                 * In IBSS mode we use this interrupt just to
2399                                 * keep track of the next TBTT (target beacon
2400                                 * transmission time) in order to detect wether
2401                                 * automatic TSF updates happened.
2402                                 */
2403                                 if (sc->opmode == NL80211_IFTYPE_ADHOC) {
2404                                          /* XXX: only if VEOL suppported */
2405                                         u64 tsf = ath5k_hw_get_tsf64(ah);
2406                                         sc->nexttbtt += sc->bintval;
2407                                         ATH5K_DBG(sc, ATH5K_DEBUG_BEACON,
2408                                                   "SWBA nexttbtt: %x hw_tu: %x "
2409                                                   "TSF: %llx\n",
2410                                                   sc->nexttbtt,
2411                                                   TSF_TO_TU(tsf),
2412                                                   (unsigned long long) tsf);
2413                                 } else {
2414                                         spin_lock(&sc->block);
2415                                         ath5k_beacon_send(sc);
2416                                         spin_unlock(&sc->block);
2417                                 }
2418                         }
2419                         if (status & AR5K_INT_RXEOL) {
2420                                 /*
2421                                 * NB: the hardware should re-read the link when
2422                                 *     RXE bit is written, but it doesn't work at
2423                                 *     least on older hardware revs.
2424                                 */
2425                                 sc->rxlink = NULL;
2426                         }
2427                         if (status & AR5K_INT_TXURN) {
2428                                 /* bump tx trigger level */
2429                                 ath5k_hw_update_tx_triglevel(ah, true);
2430                         }
2431                         if (status & (AR5K_INT_RXOK | AR5K_INT_RXERR))
2432                                 tasklet_schedule(&sc->rxtq);
2433                         if (status & (AR5K_INT_TXOK | AR5K_INT_TXDESC
2434                                         | AR5K_INT_TXERR | AR5K_INT_TXEOL))
2435                                 tasklet_schedule(&sc->txtq);
2436                         if (status & AR5K_INT_BMISS) {
2437                         }
2438                         if (status & AR5K_INT_MIB) {
2439                                 /*
2440                                  * These stats are also used for ANI i think
2441                                  * so how about updating them more often ?
2442                                  */
2443                                 ath5k_hw_update_mib_counters(ah, &sc->ll_stats);
2444                         }
2445                 }
2446         } while (ath5k_hw_is_intr_pending(ah) && counter-- > 0);
2447
2448         if (unlikely(!counter))
2449                 ATH5K_WARN(sc, "too many interrupts, giving up for now\n");
2450
2451         return IRQ_HANDLED;
2452 }
2453
2454 static void
2455 ath5k_tasklet_reset(unsigned long data)
2456 {
2457         struct ath5k_softc *sc = (void *)data;
2458
2459         ath5k_reset_wake(sc);
2460 }
2461
2462 /*
2463  * Periodically recalibrate the PHY to account
2464  * for temperature/environment changes.
2465  */
2466 static void
2467 ath5k_calibrate(unsigned long data)
2468 {
2469         struct ath5k_softc *sc = (void *)data;
2470         struct ath5k_hw *ah = sc->ah;
2471
2472         ATH5K_DBG(sc, ATH5K_DEBUG_CALIBRATE, "channel %u/%x\n",
2473                 ieee80211_frequency_to_channel(sc->curchan->center_freq),
2474                 sc->curchan->hw_value);
2475
2476         if (ath5k_hw_get_rf_gain(ah) == AR5K_RFGAIN_NEED_CHANGE) {
2477                 /*
2478                  * Rfgain is out of bounds, reset the chip
2479                  * to load new gain values.
2480                  */
2481                 ATH5K_DBG(sc, ATH5K_DEBUG_RESET, "calibration, resetting\n");
2482                 ath5k_reset_wake(sc);
2483         }
2484         if (ath5k_hw_phy_calibrate(ah, sc->curchan))
2485                 ATH5K_ERR(sc, "calibration of channel %u failed\n",
2486                         ieee80211_frequency_to_channel(
2487                                 sc->curchan->center_freq));
2488
2489         mod_timer(&sc->calib_tim, round_jiffies(jiffies +
2490                         msecs_to_jiffies(ath5k_calinterval * 1000)));
2491 }
2492
2493
2494
2495 /***************\
2496 * LED functions *
2497 \***************/
2498
2499 static void
2500 ath5k_led_enable(struct ath5k_softc *sc)
2501 {
2502         if (test_bit(ATH_STAT_LEDSOFT, sc->status)) {
2503                 ath5k_hw_set_gpio_output(sc->ah, sc->led_pin);
2504                 ath5k_led_off(sc);
2505         }
2506 }
2507
2508 static void
2509 ath5k_led_on(struct ath5k_softc *sc)
2510 {
2511         if (!test_bit(ATH_STAT_LEDSOFT, sc->status))
2512                 return;
2513         ath5k_hw_set_gpio(sc->ah, sc->led_pin, sc->led_on);
2514 }
2515
2516 static void
2517 ath5k_led_off(struct ath5k_softc *sc)
2518 {
2519         if (!test_bit(ATH_STAT_LEDSOFT, sc->status))
2520                 return;
2521         ath5k_hw_set_gpio(sc->ah, sc->led_pin, !sc->led_on);
2522 }
2523
2524 static void
2525 ath5k_led_brightness_set(struct led_classdev *led_dev,
2526         enum led_brightness brightness)
2527 {
2528         struct ath5k_led *led = container_of(led_dev, struct ath5k_led,
2529                 led_dev);
2530
2531         if (brightness == LED_OFF)
2532                 ath5k_led_off(led->sc);
2533         else
2534                 ath5k_led_on(led->sc);
2535 }
2536
2537 static int
2538 ath5k_register_led(struct ath5k_softc *sc, struct ath5k_led *led,
2539                    const char *name, char *trigger)
2540 {
2541         int err;
2542
2543         led->sc = sc;
2544         strncpy(led->name, name, sizeof(led->name));
2545         led->led_dev.name = led->name;
2546         led->led_dev.default_trigger = trigger;
2547         led->led_dev.brightness_set = ath5k_led_brightness_set;
2548
2549         err = led_classdev_register(&sc->pdev->dev, &led->led_dev);
2550         if (err) {
2551                 ATH5K_WARN(sc, "could not register LED %s\n", name);
2552                 led->sc = NULL;
2553         }
2554         return err;
2555 }
2556
2557 static void
2558 ath5k_unregister_led(struct ath5k_led *led)
2559 {
2560         if (!led->sc)
2561                 return;
2562         led_classdev_unregister(&led->led_dev);
2563         ath5k_led_off(led->sc);
2564         led->sc = NULL;
2565 }
2566
2567 static void
2568 ath5k_unregister_leds(struct ath5k_softc *sc)
2569 {
2570         ath5k_unregister_led(&sc->rx_led);
2571         ath5k_unregister_led(&sc->tx_led);
2572 }
2573
2574
2575 static int
2576 ath5k_init_leds(struct ath5k_softc *sc)
2577 {
2578         int ret = 0;
2579         struct ieee80211_hw *hw = sc->hw;
2580         struct pci_dev *pdev = sc->pdev;
2581         char name[ATH5K_LED_MAX_NAME_LEN + 1];
2582
2583         /*
2584          * Auto-enable soft led processing for IBM cards and for
2585          * 5211 minipci cards.
2586          */
2587         if (pdev->device == PCI_DEVICE_ID_ATHEROS_AR5212_IBM ||
2588             pdev->device == PCI_DEVICE_ID_ATHEROS_AR5211) {
2589                 __set_bit(ATH_STAT_LEDSOFT, sc->status);
2590                 sc->led_pin = 0;
2591                 sc->led_on = 0;  /* active low */
2592         }
2593         /* Enable softled on PIN1 on HP Compaq nc6xx, nc4000 & nx5000 laptops */
2594         if (pdev->subsystem_vendor == PCI_VENDOR_ID_COMPAQ) {
2595                 __set_bit(ATH_STAT_LEDSOFT, sc->status);
2596                 sc->led_pin = 1;
2597                 sc->led_on = 1;  /* active high */
2598         }
2599         if (!test_bit(ATH_STAT_LEDSOFT, sc->status))
2600                 goto out;
2601
2602         ath5k_led_enable(sc);
2603
2604         snprintf(name, sizeof(name), "ath5k-%s::rx", wiphy_name(hw->wiphy));
2605         ret = ath5k_register_led(sc, &sc->rx_led, name,
2606                 ieee80211_get_rx_led_name(hw));
2607         if (ret)
2608                 goto out;
2609
2610         snprintf(name, sizeof(name), "ath5k-%s::tx", wiphy_name(hw->wiphy));
2611         ret = ath5k_register_led(sc, &sc->tx_led, name,
2612                 ieee80211_get_tx_led_name(hw));
2613 out:
2614         return ret;
2615 }
2616
2617
2618 /********************\
2619 * Mac80211 functions *
2620 \********************/
2621
2622 static int
2623 ath5k_tx(struct ieee80211_hw *hw, struct sk_buff *skb)
2624 {
2625         struct ath5k_softc *sc = hw->priv;
2626         struct ath5k_buf *bf;
2627         unsigned long flags;
2628         int hdrlen;
2629         int padsize;
2630
2631         ath5k_debug_dump_skb(sc, skb, "TX  ", 1);
2632
2633         if (sc->opmode == NL80211_IFTYPE_MONITOR)
2634                 ATH5K_DBG(sc, ATH5K_DEBUG_XMIT, "tx in monitor (scan?)\n");
2635
2636         /*
2637          * the hardware expects the header padded to 4 byte boundaries
2638          * if this is not the case we add the padding after the header
2639          */
2640         hdrlen = ieee80211_get_hdrlen_from_skb(skb);
2641         padsize = ath5k_pad_size(hdrlen);
2642         if (padsize) {
2643
2644                 if (skb_headroom(skb) < padsize) {
2645                         ATH5K_ERR(sc, "tx hdrlen not %%4: %d not enough"
2646                                   " headroom to pad %d\n", hdrlen, padsize);
2647                         return -1;
2648                 }
2649                 skb_push(skb, padsize);
2650                 memmove(skb->data, skb->data+padsize, hdrlen);
2651         }
2652
2653         spin_lock_irqsave(&sc->txbuflock, flags);
2654         if (list_empty(&sc->txbuf)) {
2655                 ATH5K_ERR(sc, "no further txbuf available, dropping packet\n");
2656                 spin_unlock_irqrestore(&sc->txbuflock, flags);
2657                 ieee80211_stop_queue(hw, skb_get_queue_mapping(skb));
2658                 return -1;
2659         }
2660         bf = list_first_entry(&sc->txbuf, struct ath5k_buf, list);
2661         list_del(&bf->list);
2662         sc->txbuf_len--;
2663         if (list_empty(&sc->txbuf))
2664                 ieee80211_stop_queues(hw);
2665         spin_unlock_irqrestore(&sc->txbuflock, flags);
2666
2667         bf->skb = skb;
2668
2669         if (ath5k_txbuf_setup(sc, bf)) {
2670                 bf->skb = NULL;
2671                 spin_lock_irqsave(&sc->txbuflock, flags);
2672                 list_add_tail(&bf->list, &sc->txbuf);
2673                 sc->txbuf_len++;
2674                 spin_unlock_irqrestore(&sc->txbuflock, flags);
2675                 dev_kfree_skb_any(skb);
2676                 return 0;
2677         }
2678
2679         return 0;
2680 }
2681
2682 static int
2683 ath5k_reset(struct ath5k_softc *sc, bool stop, bool change_channel)
2684 {
2685         struct ath5k_hw *ah = sc->ah;
2686         int ret;
2687
2688         ATH5K_DBG(sc, ATH5K_DEBUG_RESET, "resetting\n");
2689
2690         if (stop) {
2691                 ath5k_hw_set_imr(ah, 0);
2692                 ath5k_txq_cleanup(sc);
2693                 ath5k_rx_stop(sc);
2694         }
2695         ret = ath5k_hw_reset(ah, sc->opmode, sc->curchan, true);
2696         if (ret) {
2697                 ATH5K_ERR(sc, "can't reset hardware (%d)\n", ret);
2698                 goto err;
2699         }
2700
2701         /*
2702          * This is needed only to setup initial state
2703          * but it's best done after a reset.
2704          */
2705         ath5k_hw_set_txpower_limit(sc->ah, 0);
2706
2707         ret = ath5k_rx_start(sc);
2708         if (ret) {
2709                 ATH5K_ERR(sc, "can't start recv logic\n");
2710                 goto err;
2711         }
2712
2713         /*
2714          * Change channels and update the h/w rate map if we're switching;
2715          * e.g. 11a to 11b/g.
2716          *
2717          * We may be doing a reset in response to an ioctl that changes the
2718          * channel so update any state that might change as a result.
2719          *
2720          * XXX needed?
2721          */
2722 /*      ath5k_chan_change(sc, c); */
2723
2724         ath5k_beacon_config(sc);
2725         /* intrs are enabled by ath5k_beacon_config */
2726
2727         return 0;
2728 err:
2729         return ret;
2730 }
2731
2732 static int
2733 ath5k_reset_wake(struct ath5k_softc *sc)
2734 {
2735         int ret;
2736
2737         ret = ath5k_reset(sc, true, true);
2738         if (!ret)
2739                 ieee80211_wake_queues(sc->hw);
2740
2741         return ret;
2742 }
2743
2744 static int ath5k_start(struct ieee80211_hw *hw)
2745 {
2746         return ath5k_init(hw->priv, false);
2747 }
2748
2749 static void ath5k_stop(struct ieee80211_hw *hw)
2750 {
2751         ath5k_stop_hw(hw->priv, false);
2752 }
2753
2754 static int ath5k_add_interface(struct ieee80211_hw *hw,
2755                 struct ieee80211_if_init_conf *conf)
2756 {
2757         struct ath5k_softc *sc = hw->priv;
2758         int ret;
2759
2760         mutex_lock(&sc->lock);
2761         if (sc->vif) {
2762                 ret = 0;
2763                 goto end;
2764         }
2765
2766         sc->vif = conf->vif;
2767
2768         switch (conf->type) {
2769         case NL80211_IFTYPE_AP:
2770         case NL80211_IFTYPE_STATION:
2771         case NL80211_IFTYPE_ADHOC:
2772         case NL80211_IFTYPE_MESH_POINT:
2773         case NL80211_IFTYPE_MONITOR:
2774                 sc->opmode = conf->type;
2775                 break;
2776         default:
2777                 ret = -EOPNOTSUPP;
2778                 goto end;
2779         }
2780
2781         /* Set to a reasonable value. Note that this will
2782          * be set to mac80211's value at ath5k_config(). */
2783         sc->bintval = 1000;
2784         ath5k_hw_set_lladdr(sc->ah, conf->mac_addr);
2785
2786         ret = 0;
2787 end:
2788         mutex_unlock(&sc->lock);
2789         return ret;
2790 }
2791
2792 static void
2793 ath5k_remove_interface(struct ieee80211_hw *hw,
2794                         struct ieee80211_if_init_conf *conf)
2795 {
2796         struct ath5k_softc *sc = hw->priv;
2797         u8 mac[ETH_ALEN] = {};
2798
2799         mutex_lock(&sc->lock);
2800         if (sc->vif != conf->vif)
2801                 goto end;
2802
2803         ath5k_hw_set_lladdr(sc->ah, mac);
2804         sc->vif = NULL;
2805 end:
2806         mutex_unlock(&sc->lock);
2807 }
2808
2809 /*
2810  * TODO: Phy disable/diversity etc
2811  */
2812 static int
2813 ath5k_config(struct ieee80211_hw *hw, u32 changed)
2814 {
2815         struct ath5k_softc *sc = hw->priv;
2816         struct ieee80211_conf *conf = &hw->conf;
2817
2818         sc->bintval = conf->beacon_int;
2819         sc->power_level = conf->power_level;
2820
2821         return ath5k_chan_set(sc, conf->channel);
2822 }
2823
2824 static int
2825 ath5k_config_interface(struct ieee80211_hw *hw, struct ieee80211_vif *vif,
2826                         struct ieee80211_if_conf *conf)
2827 {
2828         struct ath5k_softc *sc = hw->priv;
2829         struct ath5k_hw *ah = sc->ah;
2830         int ret;
2831
2832         mutex_lock(&sc->lock);
2833         if (sc->vif != vif) {
2834                 ret = -EIO;
2835                 goto unlock;
2836         }
2837         if (conf->changed & IEEE80211_IFCC_BSSID && conf->bssid) {
2838                 /* Cache for later use during resets */
2839                 memcpy(ah->ah_bssid, conf->bssid, ETH_ALEN);
2840                 /* XXX: assoc id is set to 0 for now, mac80211 doesn't have
2841                  * a clean way of letting us retrieve this yet. */
2842                 ath5k_hw_set_associd(ah, ah->ah_bssid, 0);
2843                 mmiowb();
2844         }
2845         if (conf->changed & IEEE80211_IFCC_BEACON &&
2846                         (vif->type == NL80211_IFTYPE_ADHOC ||
2847                          vif->type == NL80211_IFTYPE_MESH_POINT ||
2848                          vif->type == NL80211_IFTYPE_AP)) {
2849                 struct sk_buff *beacon = ieee80211_beacon_get(hw, vif);
2850                 if (!beacon) {
2851                         ret = -ENOMEM;
2852                         goto unlock;
2853                 }
2854                 ath5k_beacon_update(sc, beacon);
2855         }
2856         mutex_unlock(&sc->lock);
2857
2858         return ath5k_reset_wake(sc);
2859 unlock:
2860         mutex_unlock(&sc->lock);
2861         return ret;
2862 }
2863
2864 #define SUPPORTED_FIF_FLAGS \
2865         FIF_PROMISC_IN_BSS |  FIF_ALLMULTI | FIF_FCSFAIL | \
2866         FIF_PLCPFAIL | FIF_CONTROL | FIF_OTHER_BSS | \
2867         FIF_BCN_PRBRESP_PROMISC
2868 /*
2869  * o always accept unicast, broadcast, and multicast traffic
2870  * o multicast traffic for all BSSIDs will be enabled if mac80211
2871  *   says it should be
2872  * o maintain current state of phy ofdm or phy cck error reception.
2873  *   If the hardware detects any of these type of errors then
2874  *   ath5k_hw_get_rx_filter() will pass to us the respective
2875  *   hardware filters to be able to receive these type of frames.
2876  * o probe request frames are accepted only when operating in
2877  *   hostap, adhoc, or monitor modes
2878  * o enable promiscuous mode according to the interface state
2879  * o accept beacons:
2880  *   - when operating in adhoc mode so the 802.11 layer creates
2881  *     node table entries for peers,
2882  *   - when operating in station mode for collecting rssi data when
2883  *     the station is otherwise quiet, or
2884  *   - when scanning
2885  */
2886 static void ath5k_configure_filter(struct ieee80211_hw *hw,
2887                 unsigned int changed_flags,
2888                 unsigned int *new_flags,
2889                 int mc_count, struct dev_mc_list *mclist)
2890 {
2891         struct ath5k_softc *sc = hw->priv;
2892         struct ath5k_hw *ah = sc->ah;
2893         u32 mfilt[2], val, rfilt;
2894         u8 pos;
2895         int i;
2896
2897         mfilt[0] = 0;
2898         mfilt[1] = 0;
2899
2900         /* Only deal with supported flags */
2901         changed_flags &= SUPPORTED_FIF_FLAGS;
2902         *new_flags &= SUPPORTED_FIF_FLAGS;
2903
2904         /* If HW detects any phy or radar errors, leave those filters on.
2905          * Also, always enable Unicast, Broadcasts and Multicast
2906          * XXX: move unicast, bssid broadcasts and multicast to mac80211 */
2907         rfilt = (ath5k_hw_get_rx_filter(ah) & (AR5K_RX_FILTER_PHYERR)) |
2908                 (AR5K_RX_FILTER_UCAST | AR5K_RX_FILTER_BCAST |
2909                 AR5K_RX_FILTER_MCAST);
2910
2911         if (changed_flags & (FIF_PROMISC_IN_BSS | FIF_OTHER_BSS)) {
2912                 if (*new_flags & FIF_PROMISC_IN_BSS) {
2913                         rfilt |= AR5K_RX_FILTER_PROM;
2914                         __set_bit(ATH_STAT_PROMISC, sc->status);
2915                 } else {
2916                         __clear_bit(ATH_STAT_PROMISC, sc->status);
2917                 }
2918         }
2919
2920         /* Note, AR5K_RX_FILTER_MCAST is already enabled */
2921         if (*new_flags & FIF_ALLMULTI) {
2922                 mfilt[0] =  ~0;
2923                 mfilt[1] =  ~0;
2924         } else {
2925                 for (i = 0; i < mc_count; i++) {
2926                         if (!mclist)
2927                                 break;
2928                         /* calculate XOR of eight 6-bit values */
2929                         val = get_unaligned_le32(mclist->dmi_addr + 0);
2930                         pos = (val >> 18) ^ (val >> 12) ^ (val >> 6) ^ val;
2931                         val = get_unaligned_le32(mclist->dmi_addr + 3);
2932                         pos ^= (val >> 18) ^ (val >> 12) ^ (val >> 6) ^ val;
2933                         pos &= 0x3f;
2934                         mfilt[pos / 32] |= (1 << (pos % 32));
2935                         /* XXX: we might be able to just do this instead,
2936                         * but not sure, needs testing, if we do use this we'd
2937                         * neet to inform below to not reset the mcast */
2938                         /* ath5k_hw_set_mcast_filterindex(ah,
2939                          *      mclist->dmi_addr[5]); */
2940                         mclist = mclist->next;
2941                 }
2942         }
2943
2944         /* This is the best we can do */
2945         if (*new_flags & (FIF_FCSFAIL | FIF_PLCPFAIL))
2946                 rfilt |= AR5K_RX_FILTER_PHYERR;
2947
2948         /* FIF_BCN_PRBRESP_PROMISC really means to enable beacons
2949         * and probes for any BSSID, this needs testing */
2950         if (*new_flags & FIF_BCN_PRBRESP_PROMISC)
2951                 rfilt |= AR5K_RX_FILTER_BEACON | AR5K_RX_FILTER_PROBEREQ;
2952
2953         /* FIF_CONTROL doc says that if FIF_PROMISC_IN_BSS is not
2954          * set we should only pass on control frames for this
2955          * station. This needs testing. I believe right now this
2956          * enables *all* control frames, which is OK.. but
2957          * but we should see if we can improve on granularity */
2958         if (*new_flags & FIF_CONTROL)
2959                 rfilt |= AR5K_RX_FILTER_CONTROL;
2960
2961         /* Additional settings per mode -- this is per ath5k */
2962
2963         /* XXX move these to mac80211, and add a beacon IFF flag to mac80211 */
2964
2965         if (sc->opmode == NL80211_IFTYPE_MONITOR)
2966                 rfilt |= AR5K_RX_FILTER_CONTROL | AR5K_RX_FILTER_BEACON |
2967                         AR5K_RX_FILTER_PROBEREQ | AR5K_RX_FILTER_PROM;
2968         if (sc->opmode != NL80211_IFTYPE_STATION)
2969                 rfilt |= AR5K_RX_FILTER_PROBEREQ;
2970         if (sc->opmode != NL80211_IFTYPE_AP &&
2971                 sc->opmode != NL80211_IFTYPE_MESH_POINT &&
2972                 test_bit(ATH_STAT_PROMISC, sc->status))
2973                 rfilt |= AR5K_RX_FILTER_PROM;
2974         if ((sc->opmode == NL80211_IFTYPE_STATION && sc->assoc) ||
2975                 sc->opmode == NL80211_IFTYPE_ADHOC ||
2976                 sc->opmode == NL80211_IFTYPE_AP)
2977                 rfilt |= AR5K_RX_FILTER_BEACON;
2978         if (sc->opmode == NL80211_IFTYPE_MESH_POINT)
2979                 rfilt |= AR5K_RX_FILTER_CONTROL | AR5K_RX_FILTER_BEACON |
2980                         AR5K_RX_FILTER_PROBEREQ | AR5K_RX_FILTER_PROM;
2981
2982         /* Set filters */
2983         ath5k_hw_set_rx_filter(ah, rfilt);
2984
2985         /* Set multicast bits */
2986         ath5k_hw_set_mcast_filter(ah, mfilt[0], mfilt[1]);
2987         /* Set the cached hw filter flags, this will alter actually
2988          * be set in HW */
2989         sc->filter_flags = rfilt;
2990 }
2991
2992 static int
2993 ath5k_set_key(struct ieee80211_hw *hw, enum set_key_cmd cmd,
2994                 const u8 *local_addr, const u8 *addr,
2995                 struct ieee80211_key_conf *key)
2996 {
2997         struct ath5k_softc *sc = hw->priv;
2998         int ret = 0;
2999
3000         if (modparam_nohwcrypt)
3001                 return -EOPNOTSUPP;
3002
3003         switch (key->alg) {
3004         case ALG_WEP:
3005         case ALG_TKIP:
3006                 break;
3007         case ALG_CCMP:
3008                 return -EOPNOTSUPP;
3009         default:
3010                 WARN_ON(1);
3011                 return -EINVAL;
3012         }
3013
3014         mutex_lock(&sc->lock);
3015
3016         switch (cmd) {
3017         case SET_KEY:
3018                 ret = ath5k_hw_set_key(sc->ah, key->keyidx, key, addr);
3019                 if (ret) {
3020                         ATH5K_ERR(sc, "can't set the key\n");
3021                         goto unlock;
3022                 }
3023                 __set_bit(key->keyidx, sc->keymap);
3024                 key->hw_key_idx = key->keyidx;
3025                 key->flags |= (IEEE80211_KEY_FLAG_GENERATE_IV |
3026                                IEEE80211_KEY_FLAG_GENERATE_MMIC);
3027                 break;
3028         case DISABLE_KEY:
3029                 ath5k_hw_reset_key(sc->ah, key->keyidx);
3030                 __clear_bit(key->keyidx, sc->keymap);
3031                 break;
3032         default:
3033                 ret = -EINVAL;
3034                 goto unlock;
3035         }
3036
3037 unlock:
3038         mmiowb();
3039         mutex_unlock(&sc->lock);
3040         return ret;
3041 }
3042
3043 static int
3044 ath5k_get_stats(struct ieee80211_hw *hw,
3045                 struct ieee80211_low_level_stats *stats)
3046 {
3047         struct ath5k_softc *sc = hw->priv;
3048         struct ath5k_hw *ah = sc->ah;
3049
3050         /* Force update */
3051         ath5k_hw_update_mib_counters(ah, &sc->ll_stats);
3052
3053         memcpy(stats, &sc->ll_stats, sizeof(sc->ll_stats));
3054
3055         return 0;
3056 }
3057
3058 static int
3059 ath5k_get_tx_stats(struct ieee80211_hw *hw,
3060                 struct ieee80211_tx_queue_stats *stats)
3061 {
3062         struct ath5k_softc *sc = hw->priv;
3063
3064         memcpy(stats, &sc->tx_stats, sizeof(sc->tx_stats));
3065
3066         return 0;
3067 }
3068
3069 static u64
3070 ath5k_get_tsf(struct ieee80211_hw *hw)
3071 {
3072         struct ath5k_softc *sc = hw->priv;
3073
3074         return ath5k_hw_get_tsf64(sc->ah);
3075 }
3076
3077 static void
3078 ath5k_reset_tsf(struct ieee80211_hw *hw)
3079 {
3080         struct ath5k_softc *sc = hw->priv;
3081
3082         /*
3083          * in IBSS mode we need to update the beacon timers too.
3084          * this will also reset the TSF if we call it with 0
3085          */
3086         if (sc->opmode == NL80211_IFTYPE_ADHOC)
3087                 ath5k_beacon_update_timers(sc, 0);
3088         else
3089                 ath5k_hw_reset_tsf(sc->ah);
3090 }
3091
3092 static int
3093 ath5k_beacon_update(struct ath5k_softc *sc, struct sk_buff *skb)
3094 {
3095         unsigned long flags;
3096         int ret;
3097
3098         ath5k_debug_dump_skb(sc, skb, "BC  ", 1);
3099
3100         spin_lock_irqsave(&sc->block, flags);
3101         ath5k_txbuf_free(sc, sc->bbuf);
3102         sc->bbuf->skb = skb;
3103         ret = ath5k_beacon_setup(sc, sc->bbuf);
3104         if (ret)
3105                 sc->bbuf->skb = NULL;
3106         spin_unlock_irqrestore(&sc->block, flags);
3107         if (!ret) {
3108                 ath5k_beacon_config(sc);
3109                 mmiowb();
3110         }
3111
3112         return ret;
3113 }
3114 static void
3115 set_beacon_filter(struct ieee80211_hw *hw, bool enable)
3116 {
3117         struct ath5k_softc *sc = hw->priv;
3118         struct ath5k_hw *ah = sc->ah;
3119         u32 rfilt;
3120         rfilt = ath5k_hw_get_rx_filter(ah);
3121         if (enable)
3122                 rfilt |= AR5K_RX_FILTER_BEACON;
3123         else
3124                 rfilt &= ~AR5K_RX_FILTER_BEACON;
3125         ath5k_hw_set_rx_filter(ah, rfilt);
3126         sc->filter_flags = rfilt;
3127 }
3128
3129 static void ath5k_bss_info_changed(struct ieee80211_hw *hw,
3130                                     struct ieee80211_vif *vif,
3131                                     struct ieee80211_bss_conf *bss_conf,
3132                                     u32 changes)
3133 {
3134         struct ath5k_softc *sc = hw->priv;
3135         if (changes & BSS_CHANGED_ASSOC) {
3136                 mutex_lock(&sc->lock);
3137                 sc->assoc = bss_conf->assoc;
3138                 if (sc->opmode == NL80211_IFTYPE_STATION)
3139                         set_beacon_filter(hw, sc->assoc);
3140                 mutex_unlock(&sc->lock);
3141         }
3142 }