git.oblomov.eu Git - linux-2.6/blob - drivers/i2c/busses/i2c-cpm.c

   1 /*
   2  * Freescale CPM1/CPM2 I2C interface.
   3  * Copyright (c) 1999 Dan Malek (dmalek@jlc.net).
   4  *
   5  * moved into proper i2c interface;
   6  * Brad Parker (brad@heeltoe.com)
   7  *
   8  * Parts from dbox2_i2c.c (cvs.tuxbox.org)
   9  * (C) 2000-2001 Felix Domke (tmbinc@gmx.net), Gillem (htoa@gmx.net)
  10  *
  11  * (C) 2007 Montavista Software, Inc.
  12  * Vitaly Bordug <vitb@kernel.crashing.org>
  13  *
  14  * Converted to of_platform_device. Renamed to i2c-cpm.c.
  15  * (C) 2007,2008 Jochen Friedrich <jochen@scram.de>
  16  *
  17  *  This program is free software; you can redistribute it and/or modify
  18  *  it under the terms of the GNU General Public License as published by
  19  *  the Free Software Foundation; either version 2 of the License, or
  20  *  (at your option) any later version.
  21  *
  22  *  This program is distributed in the hope that it will be useful,
  23  *  but WITHOUT ANY WARRANTY; without even the implied warranty of
  24  *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  25  *  GNU General Public License for more details.
  26  *
  27  *  You should have received a copy of the GNU General Public License
  28  *  along with this program; if not, write to the Free Software
  29  *  Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
  30  */
  31
  32 #include <linux/kernel.h>
  33 #include <linux/module.h>
  34 #include <linux/delay.h>
  35 #include <linux/slab.h>
  36 #include <linux/init.h>
  37 #include <linux/interrupt.h>
  38 #include <linux/errno.h>
  39 #include <linux/stddef.h>
  40 #include <linux/i2c.h>
  41 #include <linux/io.h>
  42 #include <linux/dma-mapping.h>
  43 #include <linux/of_device.h>
  44 #include <linux/of_platform.h>
  45 #include <linux/of_i2c.h>
  46 #include <sysdev/fsl_soc.h>
  47 #include <asm/cpm.h>
  48
  49 /* Try to define this if you have an older CPU (earlier than rev D4) */
  50 /* However, better use a GPIO based bitbang driver in this case :/   */
  51 #undef  I2C_CHIP_ERRATA
  52
  53 #define CPM_MAX_READ    513
  54 #define CPM_MAXBD       4
  55
  56 #define I2C_EB                  (0x10) /* Big endian mode */
  57 #define I2C_EB_CPM2             (0x30) /* Big endian mode, memory snoop */
  58
  59 #define DPRAM_BASE              ((u8 __iomem __force *)cpm_muram_addr(0))
  60
  61 /* I2C parameter RAM. */
  62 struct i2c_ram {
  63         ushort  rbase;          /* Rx Buffer descriptor base address */
  64         ushort  tbase;          /* Tx Buffer descriptor base address */
  65         u_char  rfcr;           /* Rx function code */
  66         u_char  tfcr;           /* Tx function code */
  67         ushort  mrblr;          /* Max receive buffer length */
  68         uint    rstate;         /* Internal */
  69         uint    rdp;            /* Internal */
  70         ushort  rbptr;          /* Rx Buffer descriptor pointer */
  71         ushort  rbc;            /* Internal */
  72         uint    rxtmp;          /* Internal */
  73         uint    tstate;         /* Internal */
  74         uint    tdp;            /* Internal */
  75         ushort  tbptr;          /* Tx Buffer descriptor pointer */
  76         ushort  tbc;            /* Internal */
  77         uint    txtmp;          /* Internal */
  78         char    res1[4];        /* Reserved */
  79         ushort  rpbase;         /* Relocation pointer */
  80         char    res2[2];        /* Reserved */
  81 };
  82
  83 #define I2COM_START     0x80
  84 #define I2COM_MASTER    0x01
  85 #define I2CER_TXE       0x10
  86 #define I2CER_BUSY      0x04
  87 #define I2CER_TXB       0x02
  88 #define I2CER_RXB       0x01
  89 #define I2MOD_EN        0x01
  90
  91 /* I2C Registers */
  92 struct i2c_reg {
  93         u8      i2mod;
  94         u8      res1[3];
  95         u8      i2add;
  96         u8      res2[3];
  97         u8      i2brg;
  98         u8      res3[3];
  99         u8      i2com;
 100         u8      res4[3];
 101         u8      i2cer;
 102         u8      res5[3];
 103         u8      i2cmr;
 104 };
 105
 106 struct cpm_i2c {
 107         char *base;
 108         struct of_device *ofdev;
 109         struct i2c_adapter adap;
 110         uint dp_addr;
 111         int version; /* CPM1=1, CPM2=2 */
 112         int irq;
 113         int cp_command;
 114         int freq;
 115         struct i2c_reg __iomem *i2c_reg;
 116         struct i2c_ram __iomem *i2c_ram;
 117         u16 i2c_addr;
 118         wait_queue_head_t i2c_wait;
 119         cbd_t __iomem *tbase;
 120         cbd_t __iomem *rbase;
 121         u_char *txbuf[CPM_MAXBD];
 122         u_char *rxbuf[CPM_MAXBD];
 123         u32 txdma[CPM_MAXBD];
 124         u32 rxdma[CPM_MAXBD];
 125 };
 126
 127 static irqreturn_t cpm_i2c_interrupt(int irq, void *dev_id)
 128 {
 129         struct cpm_i2c *cpm;
 130         struct i2c_reg __iomem *i2c_reg;
 131         struct i2c_adapter *adap = dev_id;
 132         int i;
 133
 134         cpm = i2c_get_adapdata(dev_id);
 135         i2c_reg = cpm->i2c_reg;
 136
 137         /* Clear interrupt. */
 138         i = in_8(&i2c_reg->i2cer);
 139         out_8(&i2c_reg->i2cer, i);
 140
 141         dev_dbg(&adap->dev, "Interrupt: %x\n", i);
 142
 143         wake_up(&cpm->i2c_wait);
 144
 145         return i ? IRQ_HANDLED : IRQ_NONE;
 146 }
 147
 148 static void cpm_reset_i2c_params(struct cpm_i2c *cpm)
 149 {
 150         struct i2c_ram __iomem *i2c_ram = cpm->i2c_ram;
 151
 152         /* Set up the I2C parameters in the parameter ram. */
 153         out_be16(&i2c_ram->tbase, (u8 __iomem *)cpm->tbase - DPRAM_BASE);
 154         out_be16(&i2c_ram->rbase, (u8 __iomem *)cpm->rbase - DPRAM_BASE);
 155
 156         if (cpm->version == 1) {
 157                 out_8(&i2c_ram->tfcr, I2C_EB);
 158                 out_8(&i2c_ram->rfcr, I2C_EB);
 159         } else {
 160                 out_8(&i2c_ram->tfcr, I2C_EB_CPM2);
 161                 out_8(&i2c_ram->rfcr, I2C_EB_CPM2);
 162         }
 163
 164         out_be16(&i2c_ram->mrblr, CPM_MAX_READ);
 165
 166         out_be32(&i2c_ram->rstate, 0);
 167         out_be32(&i2c_ram->rdp, 0);
 168         out_be16(&i2c_ram->rbptr, 0);
 169         out_be16(&i2c_ram->rbc, 0);
 170         out_be32(&i2c_ram->rxtmp, 0);
 171         out_be32(&i2c_ram->tstate, 0);
 172         out_be32(&i2c_ram->tdp, 0);
 173         out_be16(&i2c_ram->tbptr, 0);
 174         out_be16(&i2c_ram->tbc, 0);
 175         out_be32(&i2c_ram->txtmp, 0);
 176 }
 177
 178 static void cpm_i2c_force_close(struct i2c_adapter *adap)
 179 {
 180         struct cpm_i2c *cpm = i2c_get_adapdata(adap);
 181         struct i2c_reg __iomem *i2c_reg = cpm->i2c_reg;
 182
 183         dev_dbg(&adap->dev, "cpm_i2c_force_close()\n");
 184
 185         cpm_command(cpm->cp_command, CPM_CR_CLOSE_RX_BD);
 186
 187         out_8(&i2c_reg->i2cmr, 0x00);   /* Disable all interrupts */
 188         out_8(&i2c_reg->i2cer, 0xff);
 189 }
 190
 191 static void cpm_i2c_parse_message(struct i2c_adapter *adap,
 192         struct i2c_msg *pmsg, int num, int tx, int rx)
 193 {
 194         cbd_t __iomem *tbdf;
 195         cbd_t __iomem *rbdf;
 196         u_char addr;
 197         u_char *tb;
 198         u_char *rb;
 199         struct cpm_i2c *cpm = i2c_get_adapdata(adap);
 200
 201         tbdf = cpm->tbase + tx;
 202         rbdf = cpm->rbase + rx;
 203
 204         addr = pmsg->addr << 1;
 205         if (pmsg->flags & I2C_M_RD)
 206                 addr |= 1;
 207
 208         tb = cpm->txbuf[tx];
 209         rb = cpm->rxbuf[rx];
 210
 211         /* Align read buffer */
 212         rb = (u_char *) (((ulong) rb + 1) & ~1);
 213
 214         tb[0] = addr;           /* Device address byte w/rw flag */
 215
 216         out_be16(&tbdf->cbd_datlen, pmsg->len + 1);
 217         out_be16(&tbdf->cbd_sc, 0);
 218
 219         if (!(pmsg->flags & I2C_M_NOSTART))
 220                 setbits16(&tbdf->cbd_sc, BD_I2C_START);
 221
 222         if (tx + 1 == num)
 223                 setbits16(&tbdf->cbd_sc, BD_SC_LAST | BD_SC_WRAP);
 224
 225         if (pmsg->flags & I2C_M_RD) {
 226                 /*
 227                  * To read, we need an empty buffer of the proper length.
 228                  * All that is used is the first byte for address, the remainder
 229                  * is just used for timing (and doesn't really have to exist).
 230                  */
 231
 232                 dev_dbg(&adap->dev, "cpm_i2c_read(abyte=0x%x)\n", addr);
 233
 234                 out_be16(&rbdf->cbd_datlen, 0);
 235                 out_be16(&rbdf->cbd_sc, BD_SC_EMPTY | BD_SC_INTRPT);
 236
 237                 if (rx + 1 == CPM_MAXBD)
 238                         setbits16(&rbdf->cbd_sc, BD_SC_WRAP);
 239
 240                 eieio();
 241                 setbits16(&tbdf->cbd_sc, BD_SC_READY);
 242         } else {
 243                 dev_dbg(&adap->dev, "cpm_i2c_write(abyte=0x%x)\n", addr);
 244
 245                 memcpy(tb+1, pmsg->buf, pmsg->len);
 246
 247                 eieio();
 248                 setbits16(&tbdf->cbd_sc, BD_SC_READY | BD_SC_INTRPT);
 249         }
 250 }
 251
 252 static int cpm_i2c_check_message(struct i2c_adapter *adap,
 253         struct i2c_msg *pmsg, int tx, int rx)
 254 {
 255         cbd_t __iomem *tbdf;
 256         cbd_t __iomem *rbdf;
 257         u_char *tb;
 258         u_char *rb;
 259         struct cpm_i2c *cpm = i2c_get_adapdata(adap);
 260
 261         tbdf = cpm->tbase + tx;
 262         rbdf = cpm->rbase + rx;
 263
 264         tb = cpm->txbuf[tx];
 265         rb = cpm->rxbuf[rx];
 266
 267         /* Align read buffer */
 268         rb = (u_char *) (((uint) rb + 1) & ~1);
 269
 270         eieio();
 271         if (pmsg->flags & I2C_M_RD) {
 272                 dev_dbg(&adap->dev, "tx sc 0x%04x, rx sc 0x%04x\n",
 273                         in_be16(&tbdf->cbd_sc), in_be16(&rbdf->cbd_sc));
 274
 275                 if (in_be16(&tbdf->cbd_sc) & BD_SC_NAK) {
 276                         dev_dbg(&adap->dev, "I2C read; No ack\n");
 277                         return -ENXIO;
 278                 }
 279                 if (in_be16(&rbdf->cbd_sc) & BD_SC_EMPTY) {
 280                         dev_err(&adap->dev,
 281                                 "I2C read; complete but rbuf empty\n");
 282                         return -EREMOTEIO;
 283                 }
 284                 if (in_be16(&rbdf->cbd_sc) & BD_SC_OV) {
 285                         dev_err(&adap->dev, "I2C read; Overrun\n");
 286                         return -EREMOTEIO;
 287                 }
 288                 memcpy(pmsg->buf, rb, pmsg->len);
 289         } else {
 290                 dev_dbg(&adap->dev, "tx sc %d 0x%04x\n", tx,
 291                         in_be16(&tbdf->cbd_sc));
 292
 293                 if (in_be16(&tbdf->cbd_sc) & BD_SC_NAK) {
 294                         dev_dbg(&adap->dev, "I2C write; No ack\n");
 295                         return -ENXIO;
 296                 }
 297                 if (in_be16(&tbdf->cbd_sc) & BD_SC_UN) {
 298                         dev_err(&adap->dev, "I2C write; Underrun\n");
 299                         return -EIO;
 300                 }
 301                 if (in_be16(&tbdf->cbd_sc) & BD_SC_CL) {
 302                         dev_err(&adap->dev, "I2C write; Collision\n");
 303                         return -EIO;
 304                 }
 305         }
 306         return 0;
 307 }
 308
 309 static int cpm_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg *msgs, int num)
 310 {
 311         struct cpm_i2c *cpm = i2c_get_adapdata(adap);
 312         struct i2c_reg __iomem *i2c_reg = cpm->i2c_reg;
 313         struct i2c_ram __iomem *i2c_ram = cpm->i2c_ram;
 314         struct i2c_msg *pmsg;
 315         int ret, i;
 316         int tptr;
 317         int rptr;
 318         cbd_t __iomem *tbdf;
 319         cbd_t __iomem *rbdf;
 320
 321         if (num > CPM_MAXBD)
 322                 return -EINVAL;
 323
 324         /* Check if we have any oversized READ requests */
 325         for (i = 0; i < num; i++) {
 326                 pmsg = &msgs[i];
 327                 if (pmsg->len >= CPM_MAX_READ)
 328                         return -EINVAL;
 329         }
 330
 331         /* Reset to use first buffer */
 332         out_be16(&i2c_ram->rbptr, in_be16(&i2c_ram->rbase));
 333         out_be16(&i2c_ram->tbptr, in_be16(&i2c_ram->tbase));
 334
 335         tbdf = cpm->tbase;
 336         rbdf = cpm->rbase;
 337
 338         tptr = 0;
 339         rptr = 0;
 340
 341         while (tptr < num) {
 342                 pmsg = &msgs[tptr];
 343                 dev_dbg(&adap->dev, "R: %d T: %d\n", rptr, tptr);
 344
 345                 cpm_i2c_parse_message(adap, pmsg, num, tptr, rptr);
 346                 if (pmsg->flags & I2C_M_RD)
 347                         rptr++;
 348                 tptr++;
 349         }
 350         /* Start transfer now */
 351         /* Enable RX/TX/Error interupts */
 352         out_8(&i2c_reg->i2cmr, I2CER_TXE | I2CER_TXB | I2CER_RXB);
 353         out_8(&i2c_reg->i2cer, 0xff);   /* Clear interrupt status */
 354         /* Chip bug, set enable here */
 355         setbits8(&i2c_reg->i2mod, I2MOD_EN);    /* Enable */
 356         /* Begin transmission */
 357         setbits8(&i2c_reg->i2com, I2COM_START);
 358
 359         tptr = 0;
 360         rptr = 0;
 361
 362         while (tptr < num) {
 363                 /* Check for outstanding messages */
 364                 dev_dbg(&adap->dev, "test ready.\n");
 365                 pmsg = &msgs[tptr];
 366                 if (pmsg->flags & I2C_M_RD)
 367                         ret = wait_event_timeout(cpm->i2c_wait,
 368                                 (in_be16(&tbdf[tptr].cbd_sc) & BD_SC_NAK) ||
 369                                 !(in_be16(&rbdf[rptr].cbd_sc) & BD_SC_EMPTY),
 370                                 1 * HZ);
 371                 else
 372                         ret = wait_event_timeout(cpm->i2c_wait,
 373                                 !(in_be16(&tbdf[tptr].cbd_sc) & BD_SC_READY),
 374                                 1 * HZ);
 375                 if (ret == 0) {
 376                         ret = -EREMOTEIO;
 377                         dev_err(&adap->dev, "I2C transfer: timeout\n");
 378                         goto out_err;
 379                 }
 380                 if (ret > 0) {
 381                         dev_dbg(&adap->dev, "ready.\n");
 382                         ret = cpm_i2c_check_message(adap, pmsg, tptr, rptr);
 383                         tptr++;
 384                         if (pmsg->flags & I2C_M_RD)
 385                                 rptr++;
 386                         if (ret)
 387                                 goto out_err;
 388                 }
 389         }
 390 #ifdef I2C_CHIP_ERRATA
 391         /*
 392          * Chip errata, clear enable. This is not needed on rev D4 CPUs.
 393          * Disabling I2C too early may cause too short stop condition
 394          */
 395         udelay(4);
 396         clrbits8(&i2c_reg->i2mod, I2MOD_EN);
 397 #endif
 398         return (num);
 399
 400 out_err:
 401         cpm_i2c_force_close(adap);
 402 #ifdef I2C_CHIP_ERRATA
 403         /*
 404          * Chip errata, clear enable. This is not needed on rev D4 CPUs.
 405          */
 406         clrbits8(&i2c_reg->i2mod, I2MOD_EN);
 407 #endif
 408         return ret;
 409 }
 410
 411 static u32 cpm_i2c_func(struct i2c_adapter *adap)
 412 {
 413         return I2C_FUNC_I2C | (I2C_FUNC_SMBUS_EMUL & ~I2C_FUNC_SMBUS_QUICK);
 414 }
 415
 416 /* -----exported algorithm data: -------------------------------------  */
 417
 418 static const struct i2c_algorithm cpm_i2c_algo = {
 419         .master_xfer = cpm_i2c_xfer,
 420         .functionality = cpm_i2c_func,
 421 };
 422
 423 static const struct i2c_adapter cpm_ops = {
 424         .owner          = THIS_MODULE,
 425         .name           = "i2c-cpm",
 426         .algo           = &cpm_i2c_algo,
 427 };
 428
 429 static int __devinit cpm_i2c_setup(struct cpm_i2c *cpm)
 430 {
 431         struct of_device *ofdev = cpm->ofdev;
 432         const u32 *data;
 433         int len, ret, i;
 434         void __iomem *i2c_base;
 435         cbd_t __iomem *tbdf;
 436         cbd_t __iomem *rbdf;
 437         unsigned char brg;
 438
 439         dev_dbg(&cpm->ofdev->dev, "cpm_i2c_setup()\n");
 440
 441         init_waitqueue_head(&cpm->i2c_wait);
 442
 443         cpm->irq = of_irq_to_resource(ofdev->node, 0, NULL);
 444         if (cpm->irq == NO_IRQ)
 445                 return -EINVAL;
 446
 447         /* Install interrupt handler. */
 448         ret = request_irq(cpm->irq, cpm_i2c_interrupt, 0, "cpm_i2c",
 449                           &cpm->adap);
 450         if (ret)
 451                 return ret;
 452
 453         /* I2C parameter RAM */
 454         i2c_base = of_iomap(ofdev->node, 1);
 455         if (i2c_base == NULL) {
 456                 ret = -EINVAL;
 457                 goto out_irq;
 458         }
 459
 460         if (of_device_is_compatible(ofdev->node, "fsl,cpm1-i2c")) {
 461
 462                 /* Check for and use a microcode relocation patch. */
 463                 cpm->i2c_ram = i2c_base;
 464                 cpm->i2c_addr = in_be16(&cpm->i2c_ram->rpbase);
 465
 466                 /*
 467                  * Maybe should use cpm_muram_alloc instead of hardcoding
 468                  * this in micropatch.c
 469                  */
 470                 if (cpm->i2c_addr) {
 471                         cpm->i2c_ram = cpm_muram_addr(cpm->i2c_addr);
 472                         iounmap(i2c_base);
 473                 }
 474
 475                 cpm->version = 1;
 476
 477         } else if (of_device_is_compatible(ofdev->node, "fsl,cpm2-i2c")) {
 478                 cpm->i2c_addr = cpm_muram_alloc(sizeof(struct i2c_ram), 64);
 479                 cpm->i2c_ram = cpm_muram_addr(cpm->i2c_addr);
 480                 out_be16(i2c_base, cpm->i2c_addr);
 481                 iounmap(i2c_base);
 482
 483                 cpm->version = 2;
 484
 485         } else {
 486                 iounmap(i2c_base);
 487                 ret = -EINVAL;
 488                 goto out_irq;
 489         }
 490
 491         /* I2C control/status registers */
 492         cpm->i2c_reg = of_iomap(ofdev->node, 0);
 493         if (cpm->i2c_reg == NULL) {
 494                 ret = -EINVAL;
 495                 goto out_ram;
 496         }
 497
 498         data = of_get_property(ofdev->node, "fsl,cpm-command", &len);
 499         if (!data || len != 4) {
 500                 ret = -EINVAL;
 501                 goto out_reg;
 502         }
 503         cpm->cp_command = *data;
 504
 505         data = of_get_property(ofdev->node, "linux,i2c-class", &len);
 506         if (data && len == 4)
 507                 cpm->adap.class = *data;
 508
 509         data = of_get_property(ofdev->node, "clock-frequency", &len);
 510         if (data && len == 4)
 511                 cpm->freq = *data;
 512         else
 513                 cpm->freq = 60000; /* use 60kHz i2c clock by default */
 514
 515         /*
 516          * Allocate space for CPM_MAXBD transmit and receive buffer
 517          * descriptors in the DP ram.
 518          */
 519         cpm->dp_addr = cpm_muram_alloc(sizeof(cbd_t) * 2 * CPM_MAXBD, 8);
 520         if (!cpm->dp_addr) {
 521                 ret = -ENOMEM;
 522                 goto out_reg;
 523         }
 524
 525         cpm->tbase = cpm_muram_addr(cpm->dp_addr);
 526         cpm->rbase = cpm_muram_addr(cpm->dp_addr + sizeof(cbd_t) * CPM_MAXBD);
 527
 528         /* Allocate TX and RX buffers */
 529
 530         tbdf = cpm->tbase;
 531         rbdf = cpm->rbase;
 532
 533         for (i = 0; i < CPM_MAXBD; i++) {
 534                 cpm->rxbuf[i] = dma_alloc_coherent(&cpm->ofdev->dev,
 535                                                    CPM_MAX_READ + 1,
 536                                                    &cpm->rxdma[i], GFP_KERNEL);
 537                 if (!cpm->rxbuf[i]) {
 538                         ret = -ENOMEM;
 539                         goto out_muram;
 540                 }
 541                 out_be32(&rbdf[i].cbd_bufaddr, ((cpm->rxdma[i] + 1) & ~1));
 542
 543                 cpm->txbuf[i] = (unsigned char *)dma_alloc_coherent(&cpm->ofdev->dev, CPM_MAX_READ + 1, &cpm->txdma[i], GFP_KERNEL);
 544                 if (!cpm->txbuf[i]) {
 545                         ret = -ENOMEM;
 546                         goto out_muram;
 547                 }
 548                 out_be32(&tbdf[i].cbd_bufaddr, cpm->txdma[i]);
 549         }
 550
 551         /* Initialize Tx/Rx parameters. */
 552
 553         cpm_reset_i2c_params(cpm);
 554
 555         dev_dbg(&cpm->ofdev->dev, "i2c_ram 0x%p, i2c_addr 0x%04x, freq %d\n",
 556                 cpm->i2c_ram, cpm->i2c_addr, cpm->freq);
 557         dev_dbg(&cpm->ofdev->dev, "tbase 0x%04x, rbase 0x%04x\n",
 558                 (u8 __iomem *)cpm->tbase - DPRAM_BASE,
 559                 (u8 __iomem *)cpm->rbase - DPRAM_BASE);
 560
 561         cpm_command(cpm->cp_command, CPM_CR_INIT_TRX);
 562
 563         /*
 564          * Select an invalid address. Just make sure we don't use loopback mode
 565          */
 566         out_8(&cpm->i2c_reg->i2add, 0x7f << 1);
 567
 568         /*
 569          * PDIV is set to 00 in i2mod, so brgclk/32 is used as input to the
 570          * i2c baud rate generator. This is divided by 2 x (DIV + 3) to get
 571          * the actual i2c bus frequency.
 572          */
 573         brg = get_brgfreq() / (32 * 2 * cpm->freq) - 3;
 574         out_8(&cpm->i2c_reg->i2brg, brg);
 575
 576         out_8(&cpm->i2c_reg->i2mod, 0x00);
 577         out_8(&cpm->i2c_reg->i2com, I2COM_MASTER);      /* Master mode */
 578
 579         /* Disable interrupts. */
 580         out_8(&cpm->i2c_reg->i2cmr, 0);
 581         out_8(&cpm->i2c_reg->i2cer, 0xff);
 582
 583         return 0;
 584
 585 out_muram:
 586         for (i = 0; i < CPM_MAXBD; i++) {
 587                 if (cpm->rxbuf[i])
 588                         dma_free_coherent(&cpm->ofdev->dev, CPM_MAX_READ + 1,
 589                                 cpm->rxbuf[i], cpm->rxdma[i]);
 590                 if (cpm->txbuf[i])
 591                         dma_free_coherent(&cpm->ofdev->dev, CPM_MAX_READ + 1,
 592                                 cpm->txbuf[i], cpm->txdma[i]);
 593         }
 594         cpm_muram_free(cpm->dp_addr);
 595 out_reg:
 596         iounmap(cpm->i2c_reg);
 597 out_ram:
 598         if ((cpm->version == 1) && (!cpm->i2c_addr))
 599                 iounmap(cpm->i2c_ram);
 600         if (cpm->version == 2)
 601                 cpm_muram_free(cpm->i2c_addr);
 602 out_irq:
 603         free_irq(cpm->irq, &cpm->adap);
 604         return ret;
 605 }
 606
 607 static void cpm_i2c_shutdown(struct cpm_i2c *cpm)
 608 {
 609         int i;
 610
 611         /* Shut down I2C. */
 612         clrbits8(&cpm->i2c_reg->i2mod, I2MOD_EN);
 613
 614         /* Disable interrupts */
 615         out_8(&cpm->i2c_reg->i2cmr, 0);
 616         out_8(&cpm->i2c_reg->i2cer, 0xff);
 617
 618         free_irq(cpm->irq, &cpm->adap);
 619
 620         /* Free all memory */
 621         for (i = 0; i < CPM_MAXBD; i++) {
 622                 dma_free_coherent(&cpm->ofdev->dev, CPM_MAX_READ + 1,
 623                         cpm->rxbuf[i], cpm->rxdma[i]);
 624                 dma_free_coherent(&cpm->ofdev->dev, CPM_MAX_READ + 1,
 625                         cpm->txbuf[i], cpm->txdma[i]);
 626         }
 627
 628         cpm_muram_free(cpm->dp_addr);
 629         iounmap(cpm->i2c_reg);
 630
 631         if ((cpm->version == 1) && (!cpm->i2c_addr))
 632                 iounmap(cpm->i2c_ram);
 633         if (cpm->version == 2)
 634                 cpm_muram_free(cpm->i2c_addr);
 635 }
 636
 637 static int __devinit cpm_i2c_probe(struct of_device *ofdev,
 638                          const struct of_device_id *match)
 639 {
 640         int result, len;
 641         struct cpm_i2c *cpm;
 642         const u32 *data;
 643
 644         cpm = kzalloc(sizeof(struct cpm_i2c), GFP_KERNEL);
 645         if (!cpm)
 646                 return -ENOMEM;
 647
 648         cpm->ofdev = ofdev;
 649
 650         dev_set_drvdata(&ofdev->dev, cpm);
 651
 652         cpm->adap = cpm_ops;
 653         i2c_set_adapdata(&cpm->adap, cpm);
 654         cpm->adap.dev.parent = &ofdev->dev;
 655
 656         result = cpm_i2c_setup(cpm);
 657         if (result) {
 658                 dev_err(&ofdev->dev, "Unable to init hardware\n");
 659                 goto out_free;
 660         }
 661
 662         /* register new adapter to i2c module... */
 663
 664         data = of_get_property(ofdev->node, "linux,i2c-index", &len);
 665         if (data && len == 4) {
 666                 cpm->adap.nr = *data;
 667                 result = i2c_add_numbered_adapter(&cpm->adap);
 668         } else
 669                 result = i2c_add_adapter(&cpm->adap);
 670
 671         if (result < 0) {
 672                 dev_err(&ofdev->dev, "Unable to register with I2C\n");
 673                 goto out_shut;
 674         }
 675
 676         dev_dbg(&ofdev->dev, "hw routines for %s registered.\n",
 677                 cpm->adap.name);
 678
 679         /*
 680          * register OF I2C devices
 681          */
 682         of_register_i2c_devices(&cpm->adap, ofdev->node);
 683
 684         return 0;
 685 out_shut:
 686         cpm_i2c_shutdown(cpm);
 687 out_free:
 688         dev_set_drvdata(&ofdev->dev, NULL);
 689         kfree(cpm);
 690
 691         return result;
 692 }
 693
 694 static int __devexit cpm_i2c_remove(struct of_device *ofdev)
 695 {
 696         struct cpm_i2c *cpm = dev_get_drvdata(&ofdev->dev);
 697
 698         i2c_del_adapter(&cpm->adap);
 699
 700         cpm_i2c_shutdown(cpm);
 701
 702         dev_set_drvdata(&ofdev->dev, NULL);
 703         kfree(cpm);
 704
 705         return 0;
 706 }
 707
 708 static const struct of_device_id cpm_i2c_match[] = {
 709         {
 710                 .compatible = "fsl,cpm1-i2c",
 711         },
 712         {
 713                 .compatible = "fsl,cpm2-i2c",
 714         },
 715         {},
 716 };
 717
 718 MODULE_DEVICE_TABLE(of, cpm_i2c_match);
 719
 720 static struct of_platform_driver cpm_i2c_driver = {
 721         .match_table    = cpm_i2c_match,
 722         .probe          = cpm_i2c_probe,
 723         .remove         = __devexit_p(cpm_i2c_remove),
 724         .driver         = {
 725                 .name   = "fsl-i2c-cpm",
 726                 .owner  = THIS_MODULE,
 727         }
 728 };
 729
 730 static int __init cpm_i2c_init(void)
 731 {
 732         return of_register_platform_driver(&cpm_i2c_driver);
 733 }
 734
 735 static void __exit cpm_i2c_exit(void)
 736 {
 737         of_unregister_platform_driver(&cpm_i2c_driver);
 738 }
 739
 740 module_init(cpm_i2c_init);
 741 module_exit(cpm_i2c_exit);
 742
 743 MODULE_AUTHOR("Jochen Friedrich <jochen@scram.de>");
 744 MODULE_DESCRIPTION("I2C-Bus adapter routines for CPM boards");
 745 MODULE_LICENSE("GPL");