Pull delete-sigdelayed into release branch
[linux-2.6] / drivers / acpi / events / evgpeblk.c
1 /******************************************************************************
2  *
3  * Module Name: evgpeblk - GPE block creation and initialization.
4  *
5  *****************************************************************************/
6
7 /*
8  * Copyright (C) 2000 - 2006, R. Byron Moore
9  * All rights reserved.
10  *
11  * Redistribution and use in source and binary forms, with or without
12  * modification, are permitted provided that the following conditions
13  * are met:
14  * 1. Redistributions of source code must retain the above copyright
15  *    notice, this list of conditions, and the following disclaimer,
16  *    without modification.
17  * 2. Redistributions in binary form must reproduce at minimum a disclaimer
18  *    substantially similar to the "NO WARRANTY" disclaimer below
19  *    ("Disclaimer") and any redistribution must be conditioned upon
20  *    including a substantially similar Disclaimer requirement for further
21  *    binary redistribution.
22  * 3. Neither the names of the above-listed copyright holders nor the names
23  *    of any contributors may be used to endorse or promote products derived
24  *    from this software without specific prior written permission.
25  *
26  * Alternatively, this software may be distributed under the terms of the
27  * GNU General Public License ("GPL") version 2 as published by the Free
28  * Software Foundation.
29  *
30  * NO WARRANTY
31  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
32  * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
33  * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
34  * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
35  * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
36  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
37  * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
38  * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
39  * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
40  * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
41  * POSSIBILITY OF SUCH DAMAGES.
42  */
43
44 #include <acpi/acpi.h>
45 #include <acpi/acevents.h>
46 #include <acpi/acnamesp.h>
47
48 #define _COMPONENT          ACPI_EVENTS
49 ACPI_MODULE_NAME("evgpeblk")
50
51 /* Local prototypes */
52 static acpi_status
53 acpi_ev_save_method_info(acpi_handle obj_handle,
54                          u32 level, void *obj_desc, void **return_value);
55
56 static acpi_status
57 acpi_ev_match_prw_and_gpe(acpi_handle obj_handle,
58                           u32 level, void *info, void **return_value);
59
60 static struct acpi_gpe_xrupt_info *acpi_ev_get_gpe_xrupt_block(u32
61                                                                interrupt_number);
62
63 static acpi_status
64 acpi_ev_delete_gpe_xrupt(struct acpi_gpe_xrupt_info *gpe_xrupt);
65
66 static acpi_status
67 acpi_ev_install_gpe_block(struct acpi_gpe_block_info *gpe_block,
68                           u32 interrupt_number);
69
70 static acpi_status
71 acpi_ev_create_gpe_info_blocks(struct acpi_gpe_block_info *gpe_block);
72
73 /*******************************************************************************
74  *
75  * FUNCTION:    acpi_ev_valid_gpe_event
76  *
77  * PARAMETERS:  gpe_event_info              - Info for this GPE
78  *
79  * RETURN:      TRUE if the gpe_event is valid
80  *
81  * DESCRIPTION: Validate a GPE event. DO NOT CALL FROM INTERRUPT LEVEL.
82  *              Should be called only when the GPE lists are semaphore locked
83  *              and not subject to change.
84  *
85  ******************************************************************************/
86
87 u8 acpi_ev_valid_gpe_event(struct acpi_gpe_event_info *gpe_event_info)
88 {
89         struct acpi_gpe_xrupt_info *gpe_xrupt_block;
90         struct acpi_gpe_block_info *gpe_block;
91
92         ACPI_FUNCTION_ENTRY();
93
94         /* No need for spin lock since we are not changing any list elements */
95
96         /* Walk the GPE interrupt levels */
97
98         gpe_xrupt_block = acpi_gbl_gpe_xrupt_list_head;
99         while (gpe_xrupt_block) {
100                 gpe_block = gpe_xrupt_block->gpe_block_list_head;
101
102                 /* Walk the GPE blocks on this interrupt level */
103
104                 while (gpe_block) {
105                         if ((&gpe_block->event_info[0] <= gpe_event_info) &&
106                             (&gpe_block->
107                              event_info[((acpi_size) gpe_block->
108                                          register_count) * 8] >
109                              gpe_event_info)) {
110                                 return (TRUE);
111                         }
112
113                         gpe_block = gpe_block->next;
114                 }
115
116                 gpe_xrupt_block = gpe_xrupt_block->next;
117         }
118
119         return (FALSE);
120 }
121
122 /*******************************************************************************
123  *
124  * FUNCTION:    acpi_ev_walk_gpe_list
125  *
126  * PARAMETERS:  gpe_walk_callback   - Routine called for each GPE block
127  *
128  * RETURN:      Status
129  *
130  * DESCRIPTION: Walk the GPE lists.
131  *
132  ******************************************************************************/
133
134 acpi_status acpi_ev_walk_gpe_list(ACPI_GPE_CALLBACK gpe_walk_callback)
135 {
136         struct acpi_gpe_block_info *gpe_block;
137         struct acpi_gpe_xrupt_info *gpe_xrupt_info;
138         acpi_status status = AE_OK;
139         acpi_cpu_flags flags;
140
141         ACPI_FUNCTION_TRACE("ev_walk_gpe_list");
142
143         flags = acpi_os_acquire_lock(acpi_gbl_gpe_lock);
144
145         /* Walk the interrupt level descriptor list */
146
147         gpe_xrupt_info = acpi_gbl_gpe_xrupt_list_head;
148         while (gpe_xrupt_info) {
149                 /* Walk all Gpe Blocks attached to this interrupt level */
150
151                 gpe_block = gpe_xrupt_info->gpe_block_list_head;
152                 while (gpe_block) {
153                         /* One callback per GPE block */
154
155                         status = gpe_walk_callback(gpe_xrupt_info, gpe_block);
156                         if (ACPI_FAILURE(status)) {
157                                 goto unlock_and_exit;
158                         }
159
160                         gpe_block = gpe_block->next;
161                 }
162
163                 gpe_xrupt_info = gpe_xrupt_info->next;
164         }
165
166       unlock_and_exit:
167         acpi_os_release_lock(acpi_gbl_gpe_lock, flags);
168         return_ACPI_STATUS(status);
169 }
170
171 /*******************************************************************************
172  *
173  * FUNCTION:    acpi_ev_delete_gpe_handlers
174  *
175  * PARAMETERS:  gpe_xrupt_info      - GPE Interrupt info
176  *              gpe_block           - Gpe Block info
177  *
178  * RETURN:      Status
179  *
180  * DESCRIPTION: Delete all Handler objects found in the GPE data structs.
181  *              Used only prior to termination.
182  *
183  ******************************************************************************/
184
185 acpi_status
186 acpi_ev_delete_gpe_handlers(struct acpi_gpe_xrupt_info *gpe_xrupt_info,
187                             struct acpi_gpe_block_info *gpe_block)
188 {
189         struct acpi_gpe_event_info *gpe_event_info;
190         acpi_native_uint i;
191         acpi_native_uint j;
192
193         ACPI_FUNCTION_TRACE("ev_delete_gpe_handlers");
194
195         /* Examine each GPE Register within the block */
196
197         for (i = 0; i < gpe_block->register_count; i++) {
198                 /* Now look at the individual GPEs in this byte register */
199
200                 for (j = 0; j < ACPI_GPE_REGISTER_WIDTH; j++) {
201                         gpe_event_info =
202                             &gpe_block->
203                             event_info[(i * ACPI_GPE_REGISTER_WIDTH) + j];
204
205                         if ((gpe_event_info->flags & ACPI_GPE_DISPATCH_MASK) ==
206                             ACPI_GPE_DISPATCH_HANDLER) {
207                                 ACPI_MEM_FREE(gpe_event_info->dispatch.handler);
208                                 gpe_event_info->dispatch.handler = NULL;
209                                 gpe_event_info->flags &=
210                                     ~ACPI_GPE_DISPATCH_MASK;
211                         }
212                 }
213         }
214
215         return_ACPI_STATUS(AE_OK);
216 }
217
218 /*******************************************************************************
219  *
220  * FUNCTION:    acpi_ev_save_method_info
221  *
222  * PARAMETERS:  Callback from walk_namespace
223  *
224  * RETURN:      Status
225  *
226  * DESCRIPTION: Called from acpi_walk_namespace. Expects each object to be a
227  *              control method under the _GPE portion of the namespace.
228  *              Extract the name and GPE type from the object, saving this
229  *              information for quick lookup during GPE dispatch
230  *
231  *              The name of each GPE control method is of the form:
232  *              "_Lxx" or "_Exx"
233  *              Where:
234  *                  L      - means that the GPE is level triggered
235  *                  E      - means that the GPE is edge triggered
236  *                  xx     - is the GPE number [in HEX]
237  *
238  ******************************************************************************/
239
240 static acpi_status
241 acpi_ev_save_method_info(acpi_handle obj_handle,
242                          u32 level, void *obj_desc, void **return_value)
243 {
244         struct acpi_gpe_block_info *gpe_block = (void *)obj_desc;
245         struct acpi_gpe_event_info *gpe_event_info;
246         u32 gpe_number;
247         char name[ACPI_NAME_SIZE + 1];
248         u8 type;
249         acpi_status status;
250
251         ACPI_FUNCTION_TRACE("ev_save_method_info");
252
253         /*
254          * _Lxx and _Exx GPE method support
255          *
256          * 1) Extract the name from the object and convert to a string
257          */
258         ACPI_MOVE_32_TO_32(name,
259                            &((struct acpi_namespace_node *)obj_handle)->name.
260                            integer);
261         name[ACPI_NAME_SIZE] = 0;
262
263         /*
264          * 2) Edge/Level determination is based on the 2nd character
265          *    of the method name
266          *
267          * NOTE: Default GPE type is RUNTIME. May be changed later to WAKE
268          * if a _PRW object is found that points to this GPE.
269          */
270         switch (name[1]) {
271         case 'L':
272                 type = ACPI_GPE_LEVEL_TRIGGERED;
273                 break;
274
275         case 'E':
276                 type = ACPI_GPE_EDGE_TRIGGERED;
277                 break;
278
279         default:
280                 /* Unknown method type, just ignore it! */
281
282                 ACPI_ERROR((AE_INFO,
283                             "Unknown GPE method type: %s (name not of form _Lxx or _Exx)",
284                             name));
285                 return_ACPI_STATUS(AE_OK);
286         }
287
288         /* Convert the last two characters of the name to the GPE Number */
289
290         gpe_number = ACPI_STRTOUL(&name[2], NULL, 16);
291         if (gpe_number == ACPI_UINT32_MAX) {
292                 /* Conversion failed; invalid method, just ignore it */
293
294                 ACPI_ERROR((AE_INFO,
295                             "Could not extract GPE number from name: %s (name is not of form _Lxx or _Exx)",
296                             name));
297                 return_ACPI_STATUS(AE_OK);
298         }
299
300         /* Ensure that we have a valid GPE number for this GPE block */
301
302         if ((gpe_number < gpe_block->block_base_number) ||
303             (gpe_number >=
304              (gpe_block->block_base_number +
305               (gpe_block->register_count * 8)))) {
306                 /*
307                  * Not valid for this GPE block, just ignore it
308                  * However, it may be valid for a different GPE block, since GPE0 and GPE1
309                  * methods both appear under \_GPE.
310                  */
311                 return_ACPI_STATUS(AE_OK);
312         }
313
314         /*
315          * Now we can add this information to the gpe_event_info block
316          * for use during dispatch of this GPE. Default type is RUNTIME, although
317          * this may change when the _PRW methods are executed later.
318          */
319         gpe_event_info =
320             &gpe_block->event_info[gpe_number - gpe_block->block_base_number];
321
322         gpe_event_info->flags = (u8)
323             (type | ACPI_GPE_DISPATCH_METHOD | ACPI_GPE_TYPE_RUNTIME);
324
325         gpe_event_info->dispatch.method_node =
326             (struct acpi_namespace_node *)obj_handle;
327
328         /* Update enable mask, but don't enable the HW GPE as of yet */
329
330         status = acpi_ev_enable_gpe(gpe_event_info, FALSE);
331
332         ACPI_DEBUG_PRINT((ACPI_DB_LOAD,
333                           "Registered GPE method %s as GPE number 0x%.2X\n",
334                           name, gpe_number));
335         return_ACPI_STATUS(status);
336 }
337
338 /*******************************************************************************
339  *
340  * FUNCTION:    acpi_ev_match_prw_and_gpe
341  *
342  * PARAMETERS:  Callback from walk_namespace
343  *
344  * RETURN:      Status. NOTE: We ignore errors so that the _PRW walk is
345  *              not aborted on a single _PRW failure.
346  *
347  * DESCRIPTION: Called from acpi_walk_namespace. Expects each object to be a
348  *              Device. Run the _PRW method. If present, extract the GPE
349  *              number and mark the GPE as a WAKE GPE.
350  *
351  ******************************************************************************/
352
353 static acpi_status
354 acpi_ev_match_prw_and_gpe(acpi_handle obj_handle,
355                           u32 level, void *info, void **return_value)
356 {
357         struct acpi_gpe_walk_info *gpe_info = (void *)info;
358         struct acpi_namespace_node *gpe_device;
359         struct acpi_gpe_block_info *gpe_block;
360         struct acpi_namespace_node *target_gpe_device;
361         struct acpi_gpe_event_info *gpe_event_info;
362         union acpi_operand_object *pkg_desc;
363         union acpi_operand_object *obj_desc;
364         u32 gpe_number;
365         acpi_status status;
366
367         ACPI_FUNCTION_TRACE("ev_match_prw_and_gpe");
368
369         /* Check for a _PRW method under this device */
370
371         status = acpi_ut_evaluate_object(obj_handle, METHOD_NAME__PRW,
372                                          ACPI_BTYPE_PACKAGE, &pkg_desc);
373         if (ACPI_FAILURE(status)) {
374                 /* Ignore all errors from _PRW, we don't want to abort the subsystem */
375
376                 return_ACPI_STATUS(AE_OK);
377         }
378
379         /* The returned _PRW package must have at least two elements */
380
381         if (pkg_desc->package.count < 2) {
382                 goto cleanup;
383         }
384
385         /* Extract pointers from the input context */
386
387         gpe_device = gpe_info->gpe_device;
388         gpe_block = gpe_info->gpe_block;
389
390         /*
391          * The _PRW object must return a package, we are only interested
392          * in the first element
393          */
394         obj_desc = pkg_desc->package.elements[0];
395
396         if (ACPI_GET_OBJECT_TYPE(obj_desc) == ACPI_TYPE_INTEGER) {
397                 /* Use FADT-defined GPE device (from definition of _PRW) */
398
399                 target_gpe_device = acpi_gbl_fadt_gpe_device;
400
401                 /* Integer is the GPE number in the FADT described GPE blocks */
402
403                 gpe_number = (u32) obj_desc->integer.value;
404         } else if (ACPI_GET_OBJECT_TYPE(obj_desc) == ACPI_TYPE_PACKAGE) {
405                 /* Package contains a GPE reference and GPE number within a GPE block */
406
407                 if ((obj_desc->package.count < 2) ||
408                     (ACPI_GET_OBJECT_TYPE(obj_desc->package.elements[0]) !=
409                      ACPI_TYPE_LOCAL_REFERENCE)
410                     || (ACPI_GET_OBJECT_TYPE(obj_desc->package.elements[1]) !=
411                         ACPI_TYPE_INTEGER)) {
412                         goto cleanup;
413                 }
414
415                 /* Get GPE block reference and decode */
416
417                 target_gpe_device =
418                     obj_desc->package.elements[0]->reference.node;
419                 gpe_number = (u32) obj_desc->package.elements[1]->integer.value;
420         } else {
421                 /* Unknown type, just ignore it */
422
423                 goto cleanup;
424         }
425
426         /*
427          * Is this GPE within this block?
428          *
429          * TRUE iff these conditions are true:
430          *     1) The GPE devices match.
431          *     2) The GPE index(number) is within the range of the Gpe Block
432          *          associated with the GPE device.
433          */
434         if ((gpe_device == target_gpe_device) &&
435             (gpe_number >= gpe_block->block_base_number) &&
436             (gpe_number <
437              gpe_block->block_base_number + (gpe_block->register_count * 8))) {
438                 gpe_event_info =
439                     &gpe_block->event_info[gpe_number -
440                                            gpe_block->block_base_number];
441
442                 /* Mark GPE for WAKE-ONLY but WAKE_DISABLED */
443
444                 gpe_event_info->flags &=
445                     ~(ACPI_GPE_WAKE_ENABLED | ACPI_GPE_RUN_ENABLED);
446
447                 status =
448                     acpi_ev_set_gpe_type(gpe_event_info, ACPI_GPE_TYPE_WAKE);
449                 if (ACPI_FAILURE(status)) {
450                         goto cleanup;
451                 }
452                 status =
453                     acpi_ev_update_gpe_enable_masks(gpe_event_info,
454                                                     ACPI_GPE_DISABLE);
455         }
456
457       cleanup:
458         acpi_ut_remove_reference(pkg_desc);
459         return_ACPI_STATUS(AE_OK);
460 }
461
462 /*******************************************************************************
463  *
464  * FUNCTION:    acpi_ev_get_gpe_xrupt_block
465  *
466  * PARAMETERS:  interrupt_number     - Interrupt for a GPE block
467  *
468  * RETURN:      A GPE interrupt block
469  *
470  * DESCRIPTION: Get or Create a GPE interrupt block. There is one interrupt
471  *              block per unique interrupt level used for GPEs.
472  *              Should be called only when the GPE lists are semaphore locked
473  *              and not subject to change.
474  *
475  ******************************************************************************/
476
477 static struct acpi_gpe_xrupt_info *acpi_ev_get_gpe_xrupt_block(u32
478                                                                interrupt_number)
479 {
480         struct acpi_gpe_xrupt_info *next_gpe_xrupt;
481         struct acpi_gpe_xrupt_info *gpe_xrupt;
482         acpi_status status;
483         acpi_cpu_flags flags;
484
485         ACPI_FUNCTION_TRACE("ev_get_gpe_xrupt_block");
486
487         /* No need for lock since we are not changing any list elements here */
488
489         next_gpe_xrupt = acpi_gbl_gpe_xrupt_list_head;
490         while (next_gpe_xrupt) {
491                 if (next_gpe_xrupt->interrupt_number == interrupt_number) {
492                         return_PTR(next_gpe_xrupt);
493                 }
494
495                 next_gpe_xrupt = next_gpe_xrupt->next;
496         }
497
498         /* Not found, must allocate a new xrupt descriptor */
499
500         gpe_xrupt = ACPI_MEM_CALLOCATE(sizeof(struct acpi_gpe_xrupt_info));
501         if (!gpe_xrupt) {
502                 return_PTR(NULL);
503         }
504
505         gpe_xrupt->interrupt_number = interrupt_number;
506
507         /* Install new interrupt descriptor with spin lock */
508
509         flags = acpi_os_acquire_lock(acpi_gbl_gpe_lock);
510         if (acpi_gbl_gpe_xrupt_list_head) {
511                 next_gpe_xrupt = acpi_gbl_gpe_xrupt_list_head;
512                 while (next_gpe_xrupt->next) {
513                         next_gpe_xrupt = next_gpe_xrupt->next;
514                 }
515
516                 next_gpe_xrupt->next = gpe_xrupt;
517                 gpe_xrupt->previous = next_gpe_xrupt;
518         } else {
519                 acpi_gbl_gpe_xrupt_list_head = gpe_xrupt;
520         }
521         acpi_os_release_lock(acpi_gbl_gpe_lock, flags);
522
523         /* Install new interrupt handler if not SCI_INT */
524
525         if (interrupt_number != acpi_gbl_FADT->sci_int) {
526                 status = acpi_os_install_interrupt_handler(interrupt_number,
527                                                            acpi_ev_gpe_xrupt_handler,
528                                                            gpe_xrupt);
529                 if (ACPI_FAILURE(status)) {
530                         ACPI_ERROR((AE_INFO,
531                                     "Could not install GPE interrupt handler at level 0x%X",
532                                     interrupt_number));
533                         return_PTR(NULL);
534                 }
535         }
536
537         return_PTR(gpe_xrupt);
538 }
539
540 /*******************************************************************************
541  *
542  * FUNCTION:    acpi_ev_delete_gpe_xrupt
543  *
544  * PARAMETERS:  gpe_xrupt       - A GPE interrupt info block
545  *
546  * RETURN:      Status
547  *
548  * DESCRIPTION: Remove and free a gpe_xrupt block. Remove an associated
549  *              interrupt handler if not the SCI interrupt.
550  *
551  ******************************************************************************/
552
553 static acpi_status
554 acpi_ev_delete_gpe_xrupt(struct acpi_gpe_xrupt_info *gpe_xrupt)
555 {
556         acpi_status status;
557         acpi_cpu_flags flags;
558
559         ACPI_FUNCTION_TRACE("ev_delete_gpe_xrupt");
560
561         /* We never want to remove the SCI interrupt handler */
562
563         if (gpe_xrupt->interrupt_number == acpi_gbl_FADT->sci_int) {
564                 gpe_xrupt->gpe_block_list_head = NULL;
565                 return_ACPI_STATUS(AE_OK);
566         }
567
568         /* Disable this interrupt */
569
570         status =
571             acpi_os_remove_interrupt_handler(gpe_xrupt->interrupt_number,
572                                              acpi_ev_gpe_xrupt_handler);
573         if (ACPI_FAILURE(status)) {
574                 return_ACPI_STATUS(status);
575         }
576
577         /* Unlink the interrupt block with lock */
578
579         flags = acpi_os_acquire_lock(acpi_gbl_gpe_lock);
580         if (gpe_xrupt->previous) {
581                 gpe_xrupt->previous->next = gpe_xrupt->next;
582         }
583
584         if (gpe_xrupt->next) {
585                 gpe_xrupt->next->previous = gpe_xrupt->previous;
586         }
587         acpi_os_release_lock(acpi_gbl_gpe_lock, flags);
588
589         /* Free the block */
590
591         ACPI_MEM_FREE(gpe_xrupt);
592         return_ACPI_STATUS(AE_OK);
593 }
594
595 /*******************************************************************************
596  *
597  * FUNCTION:    acpi_ev_install_gpe_block
598  *
599  * PARAMETERS:  gpe_block       - New GPE block
600  *              interrupt_number - Xrupt to be associated with this GPE block
601  *
602  * RETURN:      Status
603  *
604  * DESCRIPTION: Install new GPE block with mutex support
605  *
606  ******************************************************************************/
607
608 static acpi_status
609 acpi_ev_install_gpe_block(struct acpi_gpe_block_info *gpe_block,
610                           u32 interrupt_number)
611 {
612         struct acpi_gpe_block_info *next_gpe_block;
613         struct acpi_gpe_xrupt_info *gpe_xrupt_block;
614         acpi_status status;
615         acpi_cpu_flags flags;
616
617         ACPI_FUNCTION_TRACE("ev_install_gpe_block");
618
619         status = acpi_ut_acquire_mutex(ACPI_MTX_EVENTS);
620         if (ACPI_FAILURE(status)) {
621                 return_ACPI_STATUS(status);
622         }
623
624         gpe_xrupt_block = acpi_ev_get_gpe_xrupt_block(interrupt_number);
625         if (!gpe_xrupt_block) {
626                 status = AE_NO_MEMORY;
627                 goto unlock_and_exit;
628         }
629
630         /* Install the new block at the end of the list with lock */
631
632         flags = acpi_os_acquire_lock(acpi_gbl_gpe_lock);
633         if (gpe_xrupt_block->gpe_block_list_head) {
634                 next_gpe_block = gpe_xrupt_block->gpe_block_list_head;
635                 while (next_gpe_block->next) {
636                         next_gpe_block = next_gpe_block->next;
637                 }
638
639                 next_gpe_block->next = gpe_block;
640                 gpe_block->previous = next_gpe_block;
641         } else {
642                 gpe_xrupt_block->gpe_block_list_head = gpe_block;
643         }
644
645         gpe_block->xrupt_block = gpe_xrupt_block;
646         acpi_os_release_lock(acpi_gbl_gpe_lock, flags);
647
648       unlock_and_exit:
649         status = acpi_ut_release_mutex(ACPI_MTX_EVENTS);
650         return_ACPI_STATUS(status);
651 }
652
653 /*******************************************************************************
654  *
655  * FUNCTION:    acpi_ev_delete_gpe_block
656  *
657  * PARAMETERS:  gpe_block       - Existing GPE block
658  *
659  * RETURN:      Status
660  *
661  * DESCRIPTION: Remove a GPE block
662  *
663  ******************************************************************************/
664
665 acpi_status acpi_ev_delete_gpe_block(struct acpi_gpe_block_info *gpe_block)
666 {
667         acpi_status status;
668         acpi_cpu_flags flags;
669
670         ACPI_FUNCTION_TRACE("ev_install_gpe_block");
671
672         status = acpi_ut_acquire_mutex(ACPI_MTX_EVENTS);
673         if (ACPI_FAILURE(status)) {
674                 return_ACPI_STATUS(status);
675         }
676
677         /* Disable all GPEs in this block */
678
679         status = acpi_hw_disable_gpe_block(gpe_block->xrupt_block, gpe_block);
680
681         if (!gpe_block->previous && !gpe_block->next) {
682                 /* This is the last gpe_block on this interrupt */
683
684                 status = acpi_ev_delete_gpe_xrupt(gpe_block->xrupt_block);
685                 if (ACPI_FAILURE(status)) {
686                         goto unlock_and_exit;
687                 }
688         } else {
689                 /* Remove the block on this interrupt with lock */
690
691                 flags = acpi_os_acquire_lock(acpi_gbl_gpe_lock);
692                 if (gpe_block->previous) {
693                         gpe_block->previous->next = gpe_block->next;
694                 } else {
695                         gpe_block->xrupt_block->gpe_block_list_head =
696                             gpe_block->next;
697                 }
698
699                 if (gpe_block->next) {
700                         gpe_block->next->previous = gpe_block->previous;
701                 }
702                 acpi_os_release_lock(acpi_gbl_gpe_lock, flags);
703         }
704
705         /* Free the gpe_block */
706
707         ACPI_MEM_FREE(gpe_block->register_info);
708         ACPI_MEM_FREE(gpe_block->event_info);
709         ACPI_MEM_FREE(gpe_block);
710
711       unlock_and_exit:
712         status = acpi_ut_release_mutex(ACPI_MTX_EVENTS);
713         return_ACPI_STATUS(status);
714 }
715
716 /*******************************************************************************
717  *
718  * FUNCTION:    acpi_ev_create_gpe_info_blocks
719  *
720  * PARAMETERS:  gpe_block   - New GPE block
721  *
722  * RETURN:      Status
723  *
724  * DESCRIPTION: Create the register_info and event_info blocks for this GPE block
725  *
726  ******************************************************************************/
727
728 static acpi_status
729 acpi_ev_create_gpe_info_blocks(struct acpi_gpe_block_info *gpe_block)
730 {
731         struct acpi_gpe_register_info *gpe_register_info = NULL;
732         struct acpi_gpe_event_info *gpe_event_info = NULL;
733         struct acpi_gpe_event_info *this_event;
734         struct acpi_gpe_register_info *this_register;
735         acpi_native_uint i;
736         acpi_native_uint j;
737         acpi_status status;
738
739         ACPI_FUNCTION_TRACE("ev_create_gpe_info_blocks");
740
741         /* Allocate the GPE register information block */
742
743         gpe_register_info = ACPI_MEM_CALLOCATE((acpi_size) gpe_block->
744                                                register_count *
745                                                sizeof(struct
746                                                       acpi_gpe_register_info));
747         if (!gpe_register_info) {
748                 ACPI_ERROR((AE_INFO,
749                             "Could not allocate the gpe_register_info table"));
750                 return_ACPI_STATUS(AE_NO_MEMORY);
751         }
752
753         /*
754          * Allocate the GPE event_info block. There are eight distinct GPEs
755          * per register. Initialization to zeros is sufficient.
756          */
757         gpe_event_info = ACPI_MEM_CALLOCATE(((acpi_size) gpe_block->
758                                              register_count *
759                                              ACPI_GPE_REGISTER_WIDTH) *
760                                             sizeof(struct acpi_gpe_event_info));
761         if (!gpe_event_info) {
762                 ACPI_ERROR((AE_INFO,
763                             "Could not allocate the gpe_event_info table"));
764                 status = AE_NO_MEMORY;
765                 goto error_exit;
766         }
767
768         /* Save the new Info arrays in the GPE block */
769
770         gpe_block->register_info = gpe_register_info;
771         gpe_block->event_info = gpe_event_info;
772
773         /*
774          * Initialize the GPE Register and Event structures. A goal of these
775          * tables is to hide the fact that there are two separate GPE register sets
776          * in a given GPE hardware block, the status registers occupy the first half,
777          * and the enable registers occupy the second half.
778          */
779         this_register = gpe_register_info;
780         this_event = gpe_event_info;
781
782         for (i = 0; i < gpe_block->register_count; i++) {
783                 /* Init the register_info for this GPE register (8 GPEs) */
784
785                 this_register->base_gpe_number =
786                     (u8) (gpe_block->block_base_number +
787                           (i * ACPI_GPE_REGISTER_WIDTH));
788
789                 ACPI_STORE_ADDRESS(this_register->status_address.address,
790                                    (gpe_block->block_address.address + i));
791
792                 ACPI_STORE_ADDRESS(this_register->enable_address.address,
793                                    (gpe_block->block_address.address
794                                     + i + gpe_block->register_count));
795
796                 this_register->status_address.address_space_id =
797                     gpe_block->block_address.address_space_id;
798                 this_register->enable_address.address_space_id =
799                     gpe_block->block_address.address_space_id;
800                 this_register->status_address.register_bit_width =
801                     ACPI_GPE_REGISTER_WIDTH;
802                 this_register->enable_address.register_bit_width =
803                     ACPI_GPE_REGISTER_WIDTH;
804                 this_register->status_address.register_bit_offset =
805                     ACPI_GPE_REGISTER_WIDTH;
806                 this_register->enable_address.register_bit_offset =
807                     ACPI_GPE_REGISTER_WIDTH;
808
809                 /* Init the event_info for each GPE within this register */
810
811                 for (j = 0; j < ACPI_GPE_REGISTER_WIDTH; j++) {
812                         this_event->register_bit = acpi_gbl_decode_to8bit[j];
813                         this_event->register_info = this_register;
814                         this_event++;
815                 }
816
817                 /* Disable all GPEs within this register */
818
819                 status = acpi_hw_low_level_write(ACPI_GPE_REGISTER_WIDTH, 0x00,
820                                                  &this_register->
821                                                  enable_address);
822                 if (ACPI_FAILURE(status)) {
823                         goto error_exit;
824                 }
825
826                 /* Clear any pending GPE events within this register */
827
828                 status = acpi_hw_low_level_write(ACPI_GPE_REGISTER_WIDTH, 0xFF,
829                                                  &this_register->
830                                                  status_address);
831                 if (ACPI_FAILURE(status)) {
832                         goto error_exit;
833                 }
834
835                 this_register++;
836         }
837
838         return_ACPI_STATUS(AE_OK);
839
840       error_exit:
841         if (gpe_register_info) {
842                 ACPI_MEM_FREE(gpe_register_info);
843         }
844         if (gpe_event_info) {
845                 ACPI_MEM_FREE(gpe_event_info);
846         }
847
848         return_ACPI_STATUS(status);
849 }
850
851 /*******************************************************************************
852  *
853  * FUNCTION:    acpi_ev_create_gpe_block
854  *
855  * PARAMETERS:  gpe_device          - Handle to the parent GPE block
856  *              gpe_block_address   - Address and space_iD
857  *              register_count      - Number of GPE register pairs in the block
858  *              gpe_block_base_number - Starting GPE number for the block
859  *              interrupt_number    - H/W interrupt for the block
860  *              return_gpe_block    - Where the new block descriptor is returned
861  *
862  * RETURN:      Status
863  *
864  * DESCRIPTION: Create and Install a block of GPE registers. All GPEs within
865  *              the block are disabled at exit.
866  *              Note: Assumes namespace is locked.
867  *
868  ******************************************************************************/
869
870 acpi_status
871 acpi_ev_create_gpe_block(struct acpi_namespace_node *gpe_device,
872                          struct acpi_generic_address *gpe_block_address,
873                          u32 register_count,
874                          u8 gpe_block_base_number,
875                          u32 interrupt_number,
876                          struct acpi_gpe_block_info **return_gpe_block)
877 {
878         acpi_status status;
879         struct acpi_gpe_block_info *gpe_block;
880
881         ACPI_FUNCTION_TRACE("ev_create_gpe_block");
882
883         if (!register_count) {
884                 return_ACPI_STATUS(AE_OK);
885         }
886
887         /* Allocate a new GPE block */
888
889         gpe_block = ACPI_MEM_CALLOCATE(sizeof(struct acpi_gpe_block_info));
890         if (!gpe_block) {
891                 return_ACPI_STATUS(AE_NO_MEMORY);
892         }
893
894         /* Initialize the new GPE block */
895
896         gpe_block->node = gpe_device;
897         gpe_block->register_count = register_count;
898         gpe_block->block_base_number = gpe_block_base_number;
899
900         ACPI_MEMCPY(&gpe_block->block_address, gpe_block_address,
901                     sizeof(struct acpi_generic_address));
902
903         /*
904          * Create the register_info and event_info sub-structures
905          * Note: disables and clears all GPEs in the block
906          */
907         status = acpi_ev_create_gpe_info_blocks(gpe_block);
908         if (ACPI_FAILURE(status)) {
909                 ACPI_MEM_FREE(gpe_block);
910                 return_ACPI_STATUS(status);
911         }
912
913         /* Install the new block in the global lists */
914
915         status = acpi_ev_install_gpe_block(gpe_block, interrupt_number);
916         if (ACPI_FAILURE(status)) {
917                 ACPI_MEM_FREE(gpe_block);
918                 return_ACPI_STATUS(status);
919         }
920
921         /* Find all GPE methods (_Lxx, _Exx) for this block */
922
923         status = acpi_ns_walk_namespace(ACPI_TYPE_METHOD, gpe_device,
924                                         ACPI_UINT32_MAX, ACPI_NS_WALK_NO_UNLOCK,
925                                         acpi_ev_save_method_info, gpe_block,
926                                         NULL);
927
928         /* Return the new block */
929
930         if (return_gpe_block) {
931                 (*return_gpe_block) = gpe_block;
932         }
933
934         ACPI_DEBUG_PRINT((ACPI_DB_INIT,
935                           "GPE %02X to %02X [%4.4s] %u regs on int 0x%X\n",
936                           (u32) gpe_block->block_base_number,
937                           (u32) (gpe_block->block_base_number +
938                                  ((gpe_block->register_count *
939                                    ACPI_GPE_REGISTER_WIDTH) - 1)),
940                           gpe_device->name.ascii, gpe_block->register_count,
941                           interrupt_number));
942
943         return_ACPI_STATUS(AE_OK);
944 }
945
946 /*******************************************************************************
947  *
948  * FUNCTION:    acpi_ev_initialize_gpe_block
949  *
950  * PARAMETERS:  gpe_device          - Handle to the parent GPE block
951  *              gpe_block           - Gpe Block info
952  *
953  * RETURN:      Status
954  *
955  * DESCRIPTION: Initialize and enable a GPE block. First find and run any
956  *              _PRT methods associated with the block, then enable the
957  *              appropriate GPEs.
958  *              Note: Assumes namespace is locked.
959  *
960  ******************************************************************************/
961
962 acpi_status
963 acpi_ev_initialize_gpe_block(struct acpi_namespace_node *gpe_device,
964                              struct acpi_gpe_block_info *gpe_block)
965 {
966         acpi_status status;
967         struct acpi_gpe_event_info *gpe_event_info;
968         struct acpi_gpe_walk_info gpe_info;
969         u32 wake_gpe_count;
970         u32 gpe_enabled_count;
971         acpi_native_uint i;
972         acpi_native_uint j;
973
974         ACPI_FUNCTION_TRACE("ev_initialize_gpe_block");
975
976         /* Ignore a null GPE block (e.g., if no GPE block 1 exists) */
977
978         if (!gpe_block) {
979                 return_ACPI_STATUS(AE_OK);
980         }
981
982         /*
983          * Runtime option: Should wake GPEs be enabled at runtime?  The default
984          * is no, they should only be enabled just as the machine goes to sleep.
985          */
986         if (acpi_gbl_leave_wake_gpes_disabled) {
987                 /*
988                  * Differentiate runtime vs wake GPEs, via the _PRW control methods.
989                  * Each GPE that has one or more _PRWs that reference it is by
990                  * definition a wake GPE and will not be enabled while the machine
991                  * is running.
992                  */
993                 gpe_info.gpe_block = gpe_block;
994                 gpe_info.gpe_device = gpe_device;
995
996                 status =
997                     acpi_ns_walk_namespace(ACPI_TYPE_DEVICE, ACPI_ROOT_OBJECT,
998                                            ACPI_UINT32_MAX, ACPI_NS_WALK_UNLOCK,
999                                            acpi_ev_match_prw_and_gpe, &gpe_info,
1000                                            NULL);
1001         }
1002
1003         /*
1004          * Enable all GPEs in this block that have these attributes:
1005          * 1) are "runtime" or "run/wake" GPEs, and
1006          * 2) have a corresponding _Lxx or _Exx method
1007          *
1008          * Any other GPEs within this block must be enabled via the acpi_enable_gpe()
1009          * external interface.
1010          */
1011         wake_gpe_count = 0;
1012         gpe_enabled_count = 0;
1013
1014         for (i = 0; i < gpe_block->register_count; i++) {
1015                 for (j = 0; j < 8; j++) {
1016                         /* Get the info block for this particular GPE */
1017
1018                         gpe_event_info =
1019                             &gpe_block->
1020                             event_info[(i * ACPI_GPE_REGISTER_WIDTH) + j];
1021
1022                         if (((gpe_event_info->flags & ACPI_GPE_DISPATCH_MASK) ==
1023                              ACPI_GPE_DISPATCH_METHOD)
1024                             && (gpe_event_info->
1025                                 flags & ACPI_GPE_TYPE_RUNTIME)) {
1026                                 gpe_enabled_count++;
1027                         }
1028
1029                         if (gpe_event_info->flags & ACPI_GPE_TYPE_WAKE) {
1030                                 wake_gpe_count++;
1031                         }
1032                 }
1033         }
1034
1035         ACPI_DEBUG_PRINT((ACPI_DB_INIT,
1036                           "Found %u Wake, Enabled %u Runtime GPEs in this block\n",
1037                           wake_gpe_count, gpe_enabled_count));
1038
1039         /* Enable all valid runtime GPEs found above */
1040
1041         status = acpi_hw_enable_runtime_gpe_block(NULL, gpe_block);
1042         if (ACPI_FAILURE(status)) {
1043                 ACPI_ERROR((AE_INFO, "Could not enable GPEs in gpe_block %p",
1044                             gpe_block));
1045         }
1046
1047         return_ACPI_STATUS(status);
1048 }
1049
1050 /*******************************************************************************
1051  *
1052  * FUNCTION:    acpi_ev_gpe_initialize
1053  *
1054  * PARAMETERS:  None
1055  *
1056  * RETURN:      Status
1057  *
1058  * DESCRIPTION: Initialize the GPE data structures
1059  *
1060  ******************************************************************************/
1061
1062 acpi_status acpi_ev_gpe_initialize(void)
1063 {
1064         u32 register_count0 = 0;
1065         u32 register_count1 = 0;
1066         u32 gpe_number_max = 0;
1067         acpi_status status;
1068
1069         ACPI_FUNCTION_TRACE("ev_gpe_initialize");
1070
1071         status = acpi_ut_acquire_mutex(ACPI_MTX_NAMESPACE);
1072         if (ACPI_FAILURE(status)) {
1073                 return_ACPI_STATUS(status);
1074         }
1075
1076         /*
1077          * Initialize the GPE Block(s) defined in the FADT
1078          *
1079          * Why the GPE register block lengths are divided by 2:  From the ACPI Spec,
1080          * section "General-Purpose Event Registers", we have:
1081          *
1082          * "Each register block contains two registers of equal length
1083          *  GPEx_STS and GPEx_EN (where x is 0 or 1). The length of the
1084          *  GPE0_STS and GPE0_EN registers is equal to half the GPE0_LEN
1085          *  The length of the GPE1_STS and GPE1_EN registers is equal to
1086          *  half the GPE1_LEN. If a generic register block is not supported
1087          *  then its respective block pointer and block length values in the
1088          *  FADT table contain zeros. The GPE0_LEN and GPE1_LEN do not need
1089          *  to be the same size."
1090          */
1091
1092         /*
1093          * Determine the maximum GPE number for this machine.
1094          *
1095          * Note: both GPE0 and GPE1 are optional, and either can exist without
1096          * the other.
1097          *
1098          * If EITHER the register length OR the block address are zero, then that
1099          * particular block is not supported.
1100          */
1101         if (acpi_gbl_FADT->gpe0_blk_len && acpi_gbl_FADT->xgpe0_blk.address) {
1102                 /* GPE block 0 exists (has both length and address > 0) */
1103
1104                 register_count0 = (u16) (acpi_gbl_FADT->gpe0_blk_len / 2);
1105
1106                 gpe_number_max =
1107                     (register_count0 * ACPI_GPE_REGISTER_WIDTH) - 1;
1108
1109                 /* Install GPE Block 0 */
1110
1111                 status = acpi_ev_create_gpe_block(acpi_gbl_fadt_gpe_device,
1112                                                   &acpi_gbl_FADT->xgpe0_blk,
1113                                                   register_count0, 0,
1114                                                   acpi_gbl_FADT->sci_int,
1115                                                   &acpi_gbl_gpe_fadt_blocks[0]);
1116
1117                 if (ACPI_FAILURE(status)) {
1118                         ACPI_EXCEPTION((AE_INFO, status,
1119                                         "Could not create GPE Block 0"));
1120                 }
1121         }
1122
1123         if (acpi_gbl_FADT->gpe1_blk_len && acpi_gbl_FADT->xgpe1_blk.address) {
1124                 /* GPE block 1 exists (has both length and address > 0) */
1125
1126                 register_count1 = (u16) (acpi_gbl_FADT->gpe1_blk_len / 2);
1127
1128                 /* Check for GPE0/GPE1 overlap (if both banks exist) */
1129
1130                 if ((register_count0) &&
1131                     (gpe_number_max >= acpi_gbl_FADT->gpe1_base)) {
1132                         ACPI_ERROR((AE_INFO,
1133                                     "GPE0 block (GPE 0 to %d) overlaps the GPE1 block (GPE %d to %d) - Ignoring GPE1",
1134                                     gpe_number_max, acpi_gbl_FADT->gpe1_base,
1135                                     acpi_gbl_FADT->gpe1_base +
1136                                     ((register_count1 *
1137                                       ACPI_GPE_REGISTER_WIDTH) - 1)));
1138
1139                         /* Ignore GPE1 block by setting the register count to zero */
1140
1141                         register_count1 = 0;
1142                 } else {
1143                         /* Install GPE Block 1 */
1144
1145                         status =
1146                             acpi_ev_create_gpe_block(acpi_gbl_fadt_gpe_device,
1147                                                      &acpi_gbl_FADT->xgpe1_blk,
1148                                                      register_count1,
1149                                                      acpi_gbl_FADT->gpe1_base,
1150                                                      acpi_gbl_FADT->sci_int,
1151                                                      &acpi_gbl_gpe_fadt_blocks
1152                                                      [1]);
1153
1154                         if (ACPI_FAILURE(status)) {
1155                                 ACPI_EXCEPTION((AE_INFO, status,
1156                                                 "Could not create GPE Block 1"));
1157                         }
1158
1159                         /*
1160                          * GPE0 and GPE1 do not have to be contiguous in the GPE number
1161                          * space. However, GPE0 always starts at GPE number zero.
1162                          */
1163                         gpe_number_max = acpi_gbl_FADT->gpe1_base +
1164                             ((register_count1 * ACPI_GPE_REGISTER_WIDTH) - 1);
1165                 }
1166         }
1167
1168         /* Exit if there are no GPE registers */
1169
1170         if ((register_count0 + register_count1) == 0) {
1171                 /* GPEs are not required by ACPI, this is OK */
1172
1173                 ACPI_DEBUG_PRINT((ACPI_DB_INIT,
1174                                   "There are no GPE blocks defined in the FADT\n"));
1175                 status = AE_OK;
1176                 goto cleanup;
1177         }
1178
1179         /* Check for Max GPE number out-of-range */
1180
1181         if (gpe_number_max > ACPI_GPE_MAX) {
1182                 ACPI_ERROR((AE_INFO,
1183                             "Maximum GPE number from FADT is too large: 0x%X",
1184                             gpe_number_max));
1185                 status = AE_BAD_VALUE;
1186                 goto cleanup;
1187         }
1188
1189       cleanup:
1190         (void)acpi_ut_release_mutex(ACPI_MTX_NAMESPACE);
1191         return_ACPI_STATUS(AE_OK);
1192 }