2  * Copyright (c) 2005-2008 Chelsio, Inc. All rights reserved.
 
   4  * This software is available to you under a choice of one of two
 
   5  * licenses.  You may choose to be licensed under the terms of the GNU
 
   6  * General Public License (GPL) Version 2, available from the file
 
   7  * COPYING in the main directory of this source tree, or the
 
   8  * OpenIB.org BSD license below:
 
  10  *     Redistribution and use in source and binary forms, with or
 
  11  *     without modification, are permitted provided that the following
 
  14  *      - Redistributions of source code must retain the above
 
  15  *        copyright notice, this list of conditions and the following
 
  18  *      - Redistributions in binary form must reproduce the above
 
  19  *        copyright notice, this list of conditions and the following
 
  20  *        disclaimer in the documentation and/or other materials
 
  21  *        provided with the distribution.
 
  23  * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
 
  24  * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
 
  25  * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
 
  26  * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
 
  27  * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
 
  28  * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
 
  29  * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
 
  32 #include <linux/skbuff.h>
 
  33 #include <linux/netdevice.h>
 
  34 #include <linux/etherdevice.h>
 
  35 #include <linux/if_vlan.h>
 
  37 #include <linux/tcp.h>
 
  38 #include <linux/dma-mapping.h>
 
  44 #include "firmware_exports.h"
 
  48 #define SGE_RX_SM_BUF_SIZE 1536
 
  50 #define SGE_RX_COPY_THRES  256
 
  51 #define SGE_RX_PULL_LEN    128
 
  54  * Page chunk size for FL0 buffers if FL0 is to be populated with page chunks.
 
  55  * It must be a divisor of PAGE_SIZE.  If set to 0 FL0 will use sk_buffs
 
  58 #define FL0_PG_CHUNK_SIZE  2048
 
  59 #define FL0_PG_ORDER 0
 
  60 #define FL1_PG_CHUNK_SIZE (PAGE_SIZE > 8192 ? 16384 : 8192)
 
  61 #define FL1_PG_ORDER (PAGE_SIZE > 8192 ? 0 : 1)
 
  63 #define SGE_RX_DROP_THRES 16
 
  66  * Period of the Tx buffer reclaim timer.  This timer does not need to run
 
  67  * frequently as Tx buffers are usually reclaimed by new Tx packets.
 
  69 #define TX_RECLAIM_PERIOD (HZ / 4)
 
  71 /* WR size in bytes */
 
  72 #define WR_LEN (WR_FLITS * 8)
 
  75  * Types of Tx queues in each queue set.  Order here matters, do not change.
 
  77 enum { TXQ_ETH, TXQ_OFLD, TXQ_CTRL };
 
  79 /* Values for sge_txq.flags */
 
  81         TXQ_RUNNING = 1 << 0,   /* fetch engine is running */
 
  82         TXQ_LAST_PKT_DB = 1 << 1,       /* last packet rang the doorbell */
 
  86         __be64 flit[TX_DESC_FLITS];
 
  96 struct tx_sw_desc {             /* SW state per Tx descriptor */
 
  98         u8 eop;       /* set if last descriptor for packet */
 
  99         u8 addr_idx;  /* buffer index of first SGL entry in descriptor */
 
 100         u8 fragidx;   /* first page fragment associated with descriptor */
 
 101         s8 sflit;     /* start flit of first SGL entry in descriptor */
 
 104 struct rx_sw_desc {                /* SW state per Rx descriptor */
 
 107                 struct fl_pg_chunk pg_chunk;
 
 109         DECLARE_PCI_UNMAP_ADDR(dma_addr);
 
 112 struct rsp_desc {               /* response queue descriptor */
 
 113         struct rss_header rss_hdr;
 
 121  * Holds unmapping information for Tx packets that need deferred unmapping.
 
 122  * This structure lives at skb->head and must be allocated by callers.
 
 124 struct deferred_unmap_info {
 
 125         struct pci_dev *pdev;
 
 126         dma_addr_t addr[MAX_SKB_FRAGS + 1];
 
 130  * Maps a number of flits to the number of Tx descriptors that can hold them.
 
 133  * desc = 1 + (flits - 2) / (WR_FLITS - 1).
 
 135  * HW allows up to 4 descriptors to be combined into a WR.
 
 137 static u8 flit_desc_map[] = {
 
 139 #if SGE_NUM_GENBITS == 1
 
 140         1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
 
 141         2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2,
 
 142         3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3,
 
 143         4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4
 
 144 #elif SGE_NUM_GENBITS == 2
 
 145         1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
 
 146         2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2,
 
 147         3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3,
 
 148         4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4,
 
 150 # error "SGE_NUM_GENBITS must be 1 or 2"
 
 154 static inline struct sge_qset *fl_to_qset(const struct sge_fl *q, int qidx)
 
 156         return container_of(q, struct sge_qset, fl[qidx]);
 
 159 static inline struct sge_qset *rspq_to_qset(const struct sge_rspq *q)
 
 161         return container_of(q, struct sge_qset, rspq);
 
 164 static inline struct sge_qset *txq_to_qset(const struct sge_txq *q, int qidx)
 
 166         return container_of(q, struct sge_qset, txq[qidx]);
 
 170  *      refill_rspq - replenish an SGE response queue
 
 171  *      @adapter: the adapter
 
 172  *      @q: the response queue to replenish
 
 173  *      @credits: how many new responses to make available
 
 175  *      Replenishes a response queue by making the supplied number of responses
 
 178 static inline void refill_rspq(struct adapter *adapter,
 
 179                                const struct sge_rspq *q, unsigned int credits)
 
 182         t3_write_reg(adapter, A_SG_RSPQ_CREDIT_RETURN,
 
 183                      V_RSPQ(q->cntxt_id) | V_CREDITS(credits));
 
 187  *      need_skb_unmap - does the platform need unmapping of sk_buffs?
 
 189  *      Returns true if the platfrom needs sk_buff unmapping.  The compiler
 
 190  *      optimizes away unecessary code if this returns true.
 
 192 static inline int need_skb_unmap(void)
 
 195          * This structure is used to tell if the platfrom needs buffer
 
 196          * unmapping by checking if DECLARE_PCI_UNMAP_ADDR defines anything.
 
 199                 DECLARE_PCI_UNMAP_ADDR(addr);
 
 202         return sizeof(struct dummy) != 0;
 
 206  *      unmap_skb - unmap a packet main body and its page fragments
 
 208  *      @q: the Tx queue containing Tx descriptors for the packet
 
 209  *      @cidx: index of Tx descriptor
 
 210  *      @pdev: the PCI device
 
 212  *      Unmap the main body of an sk_buff and its page fragments, if any.
 
 213  *      Because of the fairly complicated structure of our SGLs and the desire
 
 214  *      to conserve space for metadata, the information necessary to unmap an
 
 215  *      sk_buff is spread across the sk_buff itself (buffer lengths), the HW Tx
 
 216  *      descriptors (the physical addresses of the various data buffers), and
 
 217  *      the SW descriptor state (assorted indices).  The send functions
 
 218  *      initialize the indices for the first packet descriptor so we can unmap
 
 219  *      the buffers held in the first Tx descriptor here, and we have enough
 
 220  *      information at this point to set the state for the next Tx descriptor.
 
 222  *      Note that it is possible to clean up the first descriptor of a packet
 
 223  *      before the send routines have written the next descriptors, but this
 
 224  *      race does not cause any problem.  We just end up writing the unmapping
 
 225  *      info for the descriptor first.
 
 227 static inline void unmap_skb(struct sk_buff *skb, struct sge_txq *q,
 
 228                              unsigned int cidx, struct pci_dev *pdev)
 
 230         const struct sg_ent *sgp;
 
 231         struct tx_sw_desc *d = &q->sdesc[cidx];
 
 232         int nfrags, frag_idx, curflit, j = d->addr_idx;
 
 234         sgp = (struct sg_ent *)&q->desc[cidx].flit[d->sflit];
 
 235         frag_idx = d->fragidx;
 
 237         if (frag_idx == 0 && skb_headlen(skb)) {
 
 238                 pci_unmap_single(pdev, be64_to_cpu(sgp->addr[0]),
 
 239                                  skb_headlen(skb), PCI_DMA_TODEVICE);
 
 243         curflit = d->sflit + 1 + j;
 
 244         nfrags = skb_shinfo(skb)->nr_frags;
 
 246         while (frag_idx < nfrags && curflit < WR_FLITS) {
 
 247                 pci_unmap_page(pdev, be64_to_cpu(sgp->addr[j]),
 
 248                                skb_shinfo(skb)->frags[frag_idx].size,
 
 259         if (frag_idx < nfrags) {   /* SGL continues into next Tx descriptor */
 
 260                 d = cidx + 1 == q->size ? q->sdesc : d + 1;
 
 261                 d->fragidx = frag_idx;
 
 263                 d->sflit = curflit - WR_FLITS - j; /* sflit can be -1 */
 
 268  *      free_tx_desc - reclaims Tx descriptors and their buffers
 
 269  *      @adapter: the adapter
 
 270  *      @q: the Tx queue to reclaim descriptors from
 
 271  *      @n: the number of descriptors to reclaim
 
 273  *      Reclaims Tx descriptors from an SGE Tx queue and frees the associated
 
 274  *      Tx buffers.  Called with the Tx queue lock held.
 
 276 static void free_tx_desc(struct adapter *adapter, struct sge_txq *q,
 
 279         struct tx_sw_desc *d;
 
 280         struct pci_dev *pdev = adapter->pdev;
 
 281         unsigned int cidx = q->cidx;
 
 283         const int need_unmap = need_skb_unmap() &&
 
 284                                q->cntxt_id >= FW_TUNNEL_SGEEC_START;
 
 288                 if (d->skb) {   /* an SGL is present */
 
 290                                 unmap_skb(d->skb, q, cidx, pdev);
 
 295                 if (++cidx == q->size) {
 
 304  *      reclaim_completed_tx - reclaims completed Tx descriptors
 
 305  *      @adapter: the adapter
 
 306  *      @q: the Tx queue to reclaim completed descriptors from
 
 308  *      Reclaims Tx descriptors that the SGE has indicated it has processed,
 
 309  *      and frees the associated buffers if possible.  Called with the Tx
 
 312 static inline void reclaim_completed_tx(struct adapter *adapter,
 
 315         unsigned int reclaim = q->processed - q->cleaned;
 
 318                 free_tx_desc(adapter, q, reclaim);
 
 319                 q->cleaned += reclaim;
 
 320                 q->in_use -= reclaim;
 
 325  *      should_restart_tx - are there enough resources to restart a Tx queue?
 
 328  *      Checks if there are enough descriptors to restart a suspended Tx queue.
 
 330 static inline int should_restart_tx(const struct sge_txq *q)
 
 332         unsigned int r = q->processed - q->cleaned;
 
 334         return q->in_use - r < (q->size >> 1);
 
 338  *      free_rx_bufs - free the Rx buffers on an SGE free list
 
 339  *      @pdev: the PCI device associated with the adapter
 
 340  *      @rxq: the SGE free list to clean up
 
 342  *      Release the buffers on an SGE free-buffer Rx queue.  HW fetching from
 
 343  *      this queue should be stopped before calling this function.
 
 345 static void free_rx_bufs(struct pci_dev *pdev, struct sge_fl *q)
 
 347         unsigned int cidx = q->cidx;
 
 349         while (q->credits--) {
 
 350                 struct rx_sw_desc *d = &q->sdesc[cidx];
 
 352                 pci_unmap_single(pdev, pci_unmap_addr(d, dma_addr),
 
 353                                  q->buf_size, PCI_DMA_FROMDEVICE);
 
 355                         if (d->pg_chunk.page)
 
 356                                 put_page(d->pg_chunk.page);
 
 357                         d->pg_chunk.page = NULL;
 
 362                 if (++cidx == q->size)
 
 366         if (q->pg_chunk.page) {
 
 367                 __free_pages(q->pg_chunk.page, q->order);
 
 368                 q->pg_chunk.page = NULL;
 
 373  *      add_one_rx_buf - add a packet buffer to a free-buffer list
 
 374  *      @va:  buffer start VA
 
 375  *      @len: the buffer length
 
 376  *      @d: the HW Rx descriptor to write
 
 377  *      @sd: the SW Rx descriptor to write
 
 378  *      @gen: the generation bit value
 
 379  *      @pdev: the PCI device associated with the adapter
 
 381  *      Add a buffer of the given length to the supplied HW and SW Rx
 
 384 static inline int add_one_rx_buf(void *va, unsigned int len,
 
 385                                  struct rx_desc *d, struct rx_sw_desc *sd,
 
 386                                  unsigned int gen, struct pci_dev *pdev)
 
 390         mapping = pci_map_single(pdev, va, len, PCI_DMA_FROMDEVICE);
 
 391         if (unlikely(pci_dma_mapping_error(pdev, mapping)))
 
 394         pci_unmap_addr_set(sd, dma_addr, mapping);
 
 396         d->addr_lo = cpu_to_be32(mapping);
 
 397         d->addr_hi = cpu_to_be32((u64) mapping >> 32);
 
 399         d->len_gen = cpu_to_be32(V_FLD_GEN1(gen));
 
 400         d->gen2 = cpu_to_be32(V_FLD_GEN2(gen));
 
 404 static int alloc_pg_chunk(struct sge_fl *q, struct rx_sw_desc *sd, gfp_t gfp,
 
 407         if (!q->pg_chunk.page) {
 
 408                 q->pg_chunk.page = alloc_pages(gfp, order);
 
 409                 if (unlikely(!q->pg_chunk.page))
 
 411                 q->pg_chunk.va = page_address(q->pg_chunk.page);
 
 412                 q->pg_chunk.offset = 0;
 
 414         sd->pg_chunk = q->pg_chunk;
 
 416         q->pg_chunk.offset += q->buf_size;
 
 417         if (q->pg_chunk.offset == (PAGE_SIZE << order))
 
 418                 q->pg_chunk.page = NULL;
 
 420                 q->pg_chunk.va += q->buf_size;
 
 421                 get_page(q->pg_chunk.page);
 
 427  *      refill_fl - refill an SGE free-buffer list
 
 428  *      @adapter: the adapter
 
 429  *      @q: the free-list to refill
 
 430  *      @n: the number of new buffers to allocate
 
 431  *      @gfp: the gfp flags for allocating new buffers
 
 433  *      (Re)populate an SGE free-buffer list with up to @n new packet buffers,
 
 434  *      allocated with the supplied gfp flags.  The caller must assure that
 
 435  *      @n does not exceed the queue's capacity.
 
 437 static int refill_fl(struct adapter *adap, struct sge_fl *q, int n, gfp_t gfp)
 
 440         struct rx_sw_desc *sd = &q->sdesc[q->pidx];
 
 441         struct rx_desc *d = &q->desc[q->pidx];
 
 442         unsigned int count = 0;
 
 448                         if (unlikely(alloc_pg_chunk(q, sd, gfp, q->order))) {
 
 449 nomem:                          q->alloc_failed++;
 
 452                         buf_start = sd->pg_chunk.va;
 
 454                         struct sk_buff *skb = alloc_skb(q->buf_size, gfp);
 
 460                         buf_start = skb->data;
 
 463                 err = add_one_rx_buf(buf_start, q->buf_size, d, sd, q->gen,
 
 475                 if (++q->pidx == q->size) {
 
 486                 t3_write_reg(adap, A_SG_KDOORBELL, V_EGRCNTX(q->cntxt_id));
 
 491 static inline void __refill_fl(struct adapter *adap, struct sge_fl *fl)
 
 493         refill_fl(adap, fl, min(16U, fl->size - fl->credits),
 
 494                   GFP_ATOMIC | __GFP_COMP);
 
 498  *      recycle_rx_buf - recycle a receive buffer
 
 499  *      @adapter: the adapter
 
 500  *      @q: the SGE free list
 
 501  *      @idx: index of buffer to recycle
 
 503  *      Recycles the specified buffer on the given free list by adding it at
 
 504  *      the next available slot on the list.
 
 506 static void recycle_rx_buf(struct adapter *adap, struct sge_fl *q,
 
 509         struct rx_desc *from = &q->desc[idx];
 
 510         struct rx_desc *to = &q->desc[q->pidx];
 
 512         q->sdesc[q->pidx] = q->sdesc[idx];
 
 513         to->addr_lo = from->addr_lo;    /* already big endian */
 
 514         to->addr_hi = from->addr_hi;    /* likewise */
 
 516         to->len_gen = cpu_to_be32(V_FLD_GEN1(q->gen));
 
 517         to->gen2 = cpu_to_be32(V_FLD_GEN2(q->gen));
 
 520         if (++q->pidx == q->size) {
 
 524         t3_write_reg(adap, A_SG_KDOORBELL, V_EGRCNTX(q->cntxt_id));
 
 528  *      alloc_ring - allocate resources for an SGE descriptor ring
 
 529  *      @pdev: the PCI device
 
 530  *      @nelem: the number of descriptors
 
 531  *      @elem_size: the size of each descriptor
 
 532  *      @sw_size: the size of the SW state associated with each ring element
 
 533  *      @phys: the physical address of the allocated ring
 
 534  *      @metadata: address of the array holding the SW state for the ring
 
 536  *      Allocates resources for an SGE descriptor ring, such as Tx queues,
 
 537  *      free buffer lists, or response queues.  Each SGE ring requires
 
 538  *      space for its HW descriptors plus, optionally, space for the SW state
 
 539  *      associated with each HW entry (the metadata).  The function returns
 
 540  *      three values: the virtual address for the HW ring (the return value
 
 541  *      of the function), the physical address of the HW ring, and the address
 
 544 static void *alloc_ring(struct pci_dev *pdev, size_t nelem, size_t elem_size,
 
 545                         size_t sw_size, dma_addr_t * phys, void *metadata)
 
 547         size_t len = nelem * elem_size;
 
 549         void *p = dma_alloc_coherent(&pdev->dev, len, phys, GFP_KERNEL);
 
 553         if (sw_size && metadata) {
 
 554                 s = kcalloc(nelem, sw_size, GFP_KERNEL);
 
 557                         dma_free_coherent(&pdev->dev, len, p, *phys);
 
 560                 *(void **)metadata = s;
 
 567  *      t3_reset_qset - reset a sge qset
 
 570  *      Reset the qset structure.
 
 571  *      the NAPI structure is preserved in the event of
 
 572  *      the qset's reincarnation, for example during EEH recovery.
 
 574 static void t3_reset_qset(struct sge_qset *q)
 
 577             !(q->adap->flags & NAPI_INIT)) {
 
 578                 memset(q, 0, sizeof(*q));
 
 583         memset(&q->rspq, 0, sizeof(q->rspq));
 
 584         memset(q->fl, 0, sizeof(struct sge_fl) * SGE_RXQ_PER_SET);
 
 585         memset(q->txq, 0, sizeof(struct sge_txq) * SGE_TXQ_PER_SET);
 
 587         q->tx_reclaim_timer.function = NULL; /* for t3_stop_sge_timers() */
 
 588         q->lro_frag_tbl.nr_frags = q->lro_frag_tbl.len = 0;
 
 593  *      free_qset - free the resources of an SGE queue set
 
 594  *      @adapter: the adapter owning the queue set
 
 597  *      Release the HW and SW resources associated with an SGE queue set, such
 
 598  *      as HW contexts, packet buffers, and descriptor rings.  Traffic to the
 
 599  *      queue set must be quiesced prior to calling this.
 
 601 static void t3_free_qset(struct adapter *adapter, struct sge_qset *q)
 
 604         struct pci_dev *pdev = adapter->pdev;
 
 606         for (i = 0; i < SGE_RXQ_PER_SET; ++i)
 
 608                         spin_lock_irq(&adapter->sge.reg_lock);
 
 609                         t3_sge_disable_fl(adapter, q->fl[i].cntxt_id);
 
 610                         spin_unlock_irq(&adapter->sge.reg_lock);
 
 611                         free_rx_bufs(pdev, &q->fl[i]);
 
 612                         kfree(q->fl[i].sdesc);
 
 613                         dma_free_coherent(&pdev->dev,
 
 615                                           sizeof(struct rx_desc), q->fl[i].desc,
 
 619         for (i = 0; i < SGE_TXQ_PER_SET; ++i)
 
 620                 if (q->txq[i].desc) {
 
 621                         spin_lock_irq(&adapter->sge.reg_lock);
 
 622                         t3_sge_enable_ecntxt(adapter, q->txq[i].cntxt_id, 0);
 
 623                         spin_unlock_irq(&adapter->sge.reg_lock);
 
 624                         if (q->txq[i].sdesc) {
 
 625                                 free_tx_desc(adapter, &q->txq[i],
 
 627                                 kfree(q->txq[i].sdesc);
 
 629                         dma_free_coherent(&pdev->dev,
 
 631                                           sizeof(struct tx_desc),
 
 632                                           q->txq[i].desc, q->txq[i].phys_addr);
 
 633                         __skb_queue_purge(&q->txq[i].sendq);
 
 637                 spin_lock_irq(&adapter->sge.reg_lock);
 
 638                 t3_sge_disable_rspcntxt(adapter, q->rspq.cntxt_id);
 
 639                 spin_unlock_irq(&adapter->sge.reg_lock);
 
 640                 dma_free_coherent(&pdev->dev,
 
 641                                   q->rspq.size * sizeof(struct rsp_desc),
 
 642                                   q->rspq.desc, q->rspq.phys_addr);
 
 649  *      init_qset_cntxt - initialize an SGE queue set context info
 
 651  *      @id: the queue set id
 
 653  *      Initializes the TIDs and context ids for the queues of a queue set.
 
 655 static void init_qset_cntxt(struct sge_qset *qs, unsigned int id)
 
 657         qs->rspq.cntxt_id = id;
 
 658         qs->fl[0].cntxt_id = 2 * id;
 
 659         qs->fl[1].cntxt_id = 2 * id + 1;
 
 660         qs->txq[TXQ_ETH].cntxt_id = FW_TUNNEL_SGEEC_START + id;
 
 661         qs->txq[TXQ_ETH].token = FW_TUNNEL_TID_START + id;
 
 662         qs->txq[TXQ_OFLD].cntxt_id = FW_OFLD_SGEEC_START + id;
 
 663         qs->txq[TXQ_CTRL].cntxt_id = FW_CTRL_SGEEC_START + id;
 
 664         qs->txq[TXQ_CTRL].token = FW_CTRL_TID_START + id;
 
 668  *      sgl_len - calculates the size of an SGL of the given capacity
 
 669  *      @n: the number of SGL entries
 
 671  *      Calculates the number of flits needed for a scatter/gather list that
 
 672  *      can hold the given number of entries.
 
 674 static inline unsigned int sgl_len(unsigned int n)
 
 676         /* alternatively: 3 * (n / 2) + 2 * (n & 1) */
 
 677         return (3 * n) / 2 + (n & 1);
 
 681  *      flits_to_desc - returns the num of Tx descriptors for the given flits
 
 682  *      @n: the number of flits
 
 684  *      Calculates the number of Tx descriptors needed for the supplied number
 
 687 static inline unsigned int flits_to_desc(unsigned int n)
 
 689         BUG_ON(n >= ARRAY_SIZE(flit_desc_map));
 
 690         return flit_desc_map[n];
 
 694  *      get_packet - return the next ingress packet buffer from a free list
 
 695  *      @adap: the adapter that received the packet
 
 696  *      @fl: the SGE free list holding the packet
 
 697  *      @len: the packet length including any SGE padding
 
 698  *      @drop_thres: # of remaining buffers before we start dropping packets
 
 700  *      Get the next packet from a free list and complete setup of the
 
 701  *      sk_buff.  If the packet is small we make a copy and recycle the
 
 702  *      original buffer, otherwise we use the original buffer itself.  If a
 
 703  *      positive drop threshold is supplied packets are dropped and their
 
 704  *      buffers recycled if (a) the number of remaining buffers is under the
 
 705  *      threshold and the packet is too big to copy, or (b) the packet should
 
 706  *      be copied but there is no memory for the copy.
 
 708 static struct sk_buff *get_packet(struct adapter *adap, struct sge_fl *fl,
 
 709                                   unsigned int len, unsigned int drop_thres)
 
 711         struct sk_buff *skb = NULL;
 
 712         struct rx_sw_desc *sd = &fl->sdesc[fl->cidx];
 
 714         prefetch(sd->skb->data);
 
 717         if (len <= SGE_RX_COPY_THRES) {
 
 718                 skb = alloc_skb(len, GFP_ATOMIC);
 
 719                 if (likely(skb != NULL)) {
 
 721                         pci_dma_sync_single_for_cpu(adap->pdev,
 
 722                                             pci_unmap_addr(sd, dma_addr), len,
 
 724                         memcpy(skb->data, sd->skb->data, len);
 
 725                         pci_dma_sync_single_for_device(adap->pdev,
 
 726                                             pci_unmap_addr(sd, dma_addr), len,
 
 728                 } else if (!drop_thres)
 
 731                 recycle_rx_buf(adap, fl, fl->cidx);
 
 735         if (unlikely(fl->credits < drop_thres))
 
 739         pci_unmap_single(adap->pdev, pci_unmap_addr(sd, dma_addr),
 
 740                          fl->buf_size, PCI_DMA_FROMDEVICE);
 
 743         __refill_fl(adap, fl);
 
 748  *      get_packet_pg - return the next ingress packet buffer from a free list
 
 749  *      @adap: the adapter that received the packet
 
 750  *      @fl: the SGE free list holding the packet
 
 751  *      @len: the packet length including any SGE padding
 
 752  *      @drop_thres: # of remaining buffers before we start dropping packets
 
 754  *      Get the next packet from a free list populated with page chunks.
 
 755  *      If the packet is small we make a copy and recycle the original buffer,
 
 756  *      otherwise we attach the original buffer as a page fragment to a fresh
 
 757  *      sk_buff.  If a positive drop threshold is supplied packets are dropped
 
 758  *      and their buffers recycled if (a) the number of remaining buffers is
 
 759  *      under the threshold and the packet is too big to copy, or (b) there's
 
 762  *      Note: this function is similar to @get_packet but deals with Rx buffers
 
 763  *      that are page chunks rather than sk_buffs.
 
 765 static struct sk_buff *get_packet_pg(struct adapter *adap, struct sge_fl *fl,
 
 766                                      struct sge_rspq *q, unsigned int len,
 
 767                                      unsigned int drop_thres)
 
 769         struct sk_buff *newskb, *skb;
 
 770         struct rx_sw_desc *sd = &fl->sdesc[fl->cidx];
 
 772         newskb = skb = q->pg_skb;
 
 774         if (!skb && (len <= SGE_RX_COPY_THRES)) {
 
 775                 newskb = alloc_skb(len, GFP_ATOMIC);
 
 776                 if (likely(newskb != NULL)) {
 
 777                         __skb_put(newskb, len);
 
 778                         pci_dma_sync_single_for_cpu(adap->pdev,
 
 779                                             pci_unmap_addr(sd, dma_addr), len,
 
 781                         memcpy(newskb->data, sd->pg_chunk.va, len);
 
 782                         pci_dma_sync_single_for_device(adap->pdev,
 
 783                                             pci_unmap_addr(sd, dma_addr), len,
 
 785                 } else if (!drop_thres)
 
 789                 recycle_rx_buf(adap, fl, fl->cidx);
 
 794         if (unlikely(q->rx_recycle_buf || (!skb && fl->credits <= drop_thres)))
 
 798                 newskb = alloc_skb(SGE_RX_PULL_LEN, GFP_ATOMIC);
 
 799         if (unlikely(!newskb)) {
 
 805         pci_unmap_single(adap->pdev, pci_unmap_addr(sd, dma_addr),
 
 806                          fl->buf_size, PCI_DMA_FROMDEVICE);
 
 808                 __skb_put(newskb, SGE_RX_PULL_LEN);
 
 809                 memcpy(newskb->data, sd->pg_chunk.va, SGE_RX_PULL_LEN);
 
 810                 skb_fill_page_desc(newskb, 0, sd->pg_chunk.page,
 
 811                                    sd->pg_chunk.offset + SGE_RX_PULL_LEN,
 
 812                                    len - SGE_RX_PULL_LEN);
 
 814                 newskb->data_len = len - SGE_RX_PULL_LEN;
 
 816                 skb_fill_page_desc(newskb, skb_shinfo(newskb)->nr_frags,
 
 818                                    sd->pg_chunk.offset, len);
 
 820                 newskb->data_len += len;
 
 822         newskb->truesize += newskb->data_len;
 
 826          * We do not refill FLs here, we let the caller do it to overlap a
 
 833  *      get_imm_packet - return the next ingress packet buffer from a response
 
 834  *      @resp: the response descriptor containing the packet data
 
 836  *      Return a packet containing the immediate data of the given response.
 
 838 static inline struct sk_buff *get_imm_packet(const struct rsp_desc *resp)
 
 840         struct sk_buff *skb = alloc_skb(IMMED_PKT_SIZE, GFP_ATOMIC);
 
 843                 __skb_put(skb, IMMED_PKT_SIZE);
 
 844                 skb_copy_to_linear_data(skb, resp->imm_data, IMMED_PKT_SIZE);
 
 850  *      calc_tx_descs - calculate the number of Tx descriptors for a packet
 
 853  *      Returns the number of Tx descriptors needed for the given Ethernet
 
 854  *      packet.  Ethernet packets require addition of WR and CPL headers.
 
 856 static inline unsigned int calc_tx_descs(const struct sk_buff *skb)
 
 860         if (skb->len <= WR_LEN - sizeof(struct cpl_tx_pkt))
 
 863         flits = sgl_len(skb_shinfo(skb)->nr_frags + 1) + 2;
 
 864         if (skb_shinfo(skb)->gso_size)
 
 866         return flits_to_desc(flits);
 
 870  *      make_sgl - populate a scatter/gather list for a packet
 
 872  *      @sgp: the SGL to populate
 
 873  *      @start: start address of skb main body data to include in the SGL
 
 874  *      @len: length of skb main body data to include in the SGL
 
 875  *      @pdev: the PCI device
 
 877  *      Generates a scatter/gather list for the buffers that make up a packet
 
 878  *      and returns the SGL size in 8-byte words.  The caller must size the SGL
 
 881 static inline unsigned int make_sgl(const struct sk_buff *skb,
 
 882                                     struct sg_ent *sgp, unsigned char *start,
 
 883                                     unsigned int len, struct pci_dev *pdev)
 
 886         unsigned int i, j = 0, nfrags;
 
 889                 mapping = pci_map_single(pdev, start, len, PCI_DMA_TODEVICE);
 
 890                 sgp->len[0] = cpu_to_be32(len);
 
 891                 sgp->addr[0] = cpu_to_be64(mapping);
 
 895         nfrags = skb_shinfo(skb)->nr_frags;
 
 896         for (i = 0; i < nfrags; i++) {
 
 897                 skb_frag_t *frag = &skb_shinfo(skb)->frags[i];
 
 899                 mapping = pci_map_page(pdev, frag->page, frag->page_offset,
 
 900                                        frag->size, PCI_DMA_TODEVICE);
 
 901                 sgp->len[j] = cpu_to_be32(frag->size);
 
 902                 sgp->addr[j] = cpu_to_be64(mapping);
 
 909         return ((nfrags + (len != 0)) * 3) / 2 + j;
 
 913  *      check_ring_tx_db - check and potentially ring a Tx queue's doorbell
 
 917  *      Ring the doorbel if a Tx queue is asleep.  There is a natural race,
 
 918  *      where the HW is going to sleep just after we checked, however,
 
 919  *      then the interrupt handler will detect the outstanding TX packet
 
 920  *      and ring the doorbell for us.
 
 922  *      When GTS is disabled we unconditionally ring the doorbell.
 
 924 static inline void check_ring_tx_db(struct adapter *adap, struct sge_txq *q)
 
 927         clear_bit(TXQ_LAST_PKT_DB, &q->flags);
 
 928         if (test_and_set_bit(TXQ_RUNNING, &q->flags) == 0) {
 
 929                 set_bit(TXQ_LAST_PKT_DB, &q->flags);
 
 930                 t3_write_reg(adap, A_SG_KDOORBELL,
 
 931                              F_SELEGRCNTX | V_EGRCNTX(q->cntxt_id));
 
 934         wmb();                  /* write descriptors before telling HW */
 
 935         t3_write_reg(adap, A_SG_KDOORBELL,
 
 936                      F_SELEGRCNTX | V_EGRCNTX(q->cntxt_id));
 
 940 static inline void wr_gen2(struct tx_desc *d, unsigned int gen)
 
 942 #if SGE_NUM_GENBITS == 2
 
 943         d->flit[TX_DESC_FLITS - 1] = cpu_to_be64(gen);
 
 948  *      write_wr_hdr_sgl - write a WR header and, optionally, SGL
 
 949  *      @ndesc: number of Tx descriptors spanned by the SGL
 
 950  *      @skb: the packet corresponding to the WR
 
 951  *      @d: first Tx descriptor to be written
 
 952  *      @pidx: index of above descriptors
 
 953  *      @q: the SGE Tx queue
 
 955  *      @flits: number of flits to the start of the SGL in the first descriptor
 
 956  *      @sgl_flits: the SGL size in flits
 
 957  *      @gen: the Tx descriptor generation
 
 958  *      @wr_hi: top 32 bits of WR header based on WR type (big endian)
 
 959  *      @wr_lo: low 32 bits of WR header based on WR type (big endian)
 
 961  *      Write a work request header and an associated SGL.  If the SGL is
 
 962  *      small enough to fit into one Tx descriptor it has already been written
 
 963  *      and we just need to write the WR header.  Otherwise we distribute the
 
 964  *      SGL across the number of descriptors it spans.
 
 966 static void write_wr_hdr_sgl(unsigned int ndesc, struct sk_buff *skb,
 
 967                              struct tx_desc *d, unsigned int pidx,
 
 968                              const struct sge_txq *q,
 
 969                              const struct sg_ent *sgl,
 
 970                              unsigned int flits, unsigned int sgl_flits,
 
 971                              unsigned int gen, __be32 wr_hi,
 
 974         struct work_request_hdr *wrp = (struct work_request_hdr *)d;
 
 975         struct tx_sw_desc *sd = &q->sdesc[pidx];
 
 978         if (need_skb_unmap()) {
 
 984         if (likely(ndesc == 1)) {
 
 986                 wrp->wr_hi = htonl(F_WR_SOP | F_WR_EOP | V_WR_DATATYPE(1) |
 
 987                                    V_WR_SGLSFLT(flits)) | wr_hi;
 
 989                 wrp->wr_lo = htonl(V_WR_LEN(flits + sgl_flits) |
 
 990                                    V_WR_GEN(gen)) | wr_lo;
 
 993                 unsigned int ogen = gen;
 
 994                 const u64 *fp = (const u64 *)sgl;
 
 995                 struct work_request_hdr *wp = wrp;
 
 997                 wrp->wr_hi = htonl(F_WR_SOP | V_WR_DATATYPE(1) |
 
 998                                    V_WR_SGLSFLT(flits)) | wr_hi;
 
1001                         unsigned int avail = WR_FLITS - flits;
 
1003                         if (avail > sgl_flits)
 
1005                         memcpy(&d->flit[flits], fp, avail * sizeof(*fp));
 
1015                         if (++pidx == q->size) {
 
1023                         wrp = (struct work_request_hdr *)d;
 
1024                         wrp->wr_hi = htonl(V_WR_DATATYPE(1) |
 
1025                                            V_WR_SGLSFLT(1)) | wr_hi;
 
1026                         wrp->wr_lo = htonl(V_WR_LEN(min(WR_FLITS,
 
1028                                            V_WR_GEN(gen)) | wr_lo;
 
1033                 wrp->wr_hi |= htonl(F_WR_EOP);
 
1035                 wp->wr_lo = htonl(V_WR_LEN(WR_FLITS) | V_WR_GEN(ogen)) | wr_lo;
 
1036                 wr_gen2((struct tx_desc *)wp, ogen);
 
1037                 WARN_ON(ndesc != 0);
 
1042  *      write_tx_pkt_wr - write a TX_PKT work request
 
1043  *      @adap: the adapter
 
1044  *      @skb: the packet to send
 
1045  *      @pi: the egress interface
 
1046  *      @pidx: index of the first Tx descriptor to write
 
1047  *      @gen: the generation value to use
 
1049  *      @ndesc: number of descriptors the packet will occupy
 
1050  *      @compl: the value of the COMPL bit to use
 
1052  *      Generate a TX_PKT work request to send the supplied packet.
 
1054 static void write_tx_pkt_wr(struct adapter *adap, struct sk_buff *skb,
 
1055                             const struct port_info *pi,
 
1056                             unsigned int pidx, unsigned int gen,
 
1057                             struct sge_txq *q, unsigned int ndesc,
 
1060         unsigned int flits, sgl_flits, cntrl, tso_info;
 
1061         struct sg_ent *sgp, sgl[MAX_SKB_FRAGS / 2 + 1];
 
1062         struct tx_desc *d = &q->desc[pidx];
 
1063         struct cpl_tx_pkt *cpl = (struct cpl_tx_pkt *)d;
 
1065         cpl->len = htonl(skb->len | 0x80000000);
 
1066         cntrl = V_TXPKT_INTF(pi->port_id);
 
1068         if (vlan_tx_tag_present(skb) && pi->vlan_grp)
 
1069                 cntrl |= F_TXPKT_VLAN_VLD | V_TXPKT_VLAN(vlan_tx_tag_get(skb));
 
1071         tso_info = V_LSO_MSS(skb_shinfo(skb)->gso_size);
 
1074                 struct cpl_tx_pkt_lso *hdr = (struct cpl_tx_pkt_lso *)cpl;
 
1077                 cntrl |= V_TXPKT_OPCODE(CPL_TX_PKT_LSO);
 
1078                 hdr->cntrl = htonl(cntrl);
 
1079                 eth_type = skb_network_offset(skb) == ETH_HLEN ?
 
1080                     CPL_ETH_II : CPL_ETH_II_VLAN;
 
1081                 tso_info |= V_LSO_ETH_TYPE(eth_type) |
 
1082                     V_LSO_IPHDR_WORDS(ip_hdr(skb)->ihl) |
 
1083                     V_LSO_TCPHDR_WORDS(tcp_hdr(skb)->doff);
 
1084                 hdr->lso_info = htonl(tso_info);
 
1087                 cntrl |= V_TXPKT_OPCODE(CPL_TX_PKT);
 
1088                 cntrl |= F_TXPKT_IPCSUM_DIS;    /* SW calculates IP csum */
 
1089                 cntrl |= V_TXPKT_L4CSUM_DIS(skb->ip_summed != CHECKSUM_PARTIAL);
 
1090                 cpl->cntrl = htonl(cntrl);
 
1092                 if (skb->len <= WR_LEN - sizeof(*cpl)) {
 
1093                         q->sdesc[pidx].skb = NULL;
 
1095                                 skb_copy_from_linear_data(skb, &d->flit[2],
 
1098                                 skb_copy_bits(skb, 0, &d->flit[2], skb->len);
 
1100                         flits = (skb->len + 7) / 8 + 2;
 
1101                         cpl->wr.wr_hi = htonl(V_WR_BCNTLFLT(skb->len & 7) |
 
1102                                               V_WR_OP(FW_WROPCODE_TUNNEL_TX_PKT)
 
1103                                               | F_WR_SOP | F_WR_EOP | compl);
 
1105                         cpl->wr.wr_lo = htonl(V_WR_LEN(flits) | V_WR_GEN(gen) |
 
1106                                               V_WR_TID(q->token));
 
1115         sgp = ndesc == 1 ? (struct sg_ent *)&d->flit[flits] : sgl;
 
1116         sgl_flits = make_sgl(skb, sgp, skb->data, skb_headlen(skb), adap->pdev);
 
1118         write_wr_hdr_sgl(ndesc, skb, d, pidx, q, sgl, flits, sgl_flits, gen,
 
1119                          htonl(V_WR_OP(FW_WROPCODE_TUNNEL_TX_PKT) | compl),
 
1120                          htonl(V_WR_TID(q->token)));
 
1123 static inline void t3_stop_tx_queue(struct netdev_queue *txq,
 
1124                                     struct sge_qset *qs, struct sge_txq *q)
 
1126         netif_tx_stop_queue(txq);
 
1127         set_bit(TXQ_ETH, &qs->txq_stopped);
 
1132  *      eth_xmit - add a packet to the Ethernet Tx queue
 
1134  *      @dev: the egress net device
 
1136  *      Add a packet to an SGE Tx queue.  Runs with softirqs disabled.
 
1138 int t3_eth_xmit(struct sk_buff *skb, struct net_device *dev)
 
1141         unsigned int ndesc, pidx, credits, gen, compl;
 
1142         const struct port_info *pi = netdev_priv(dev);
 
1143         struct adapter *adap = pi->adapter;
 
1144         struct netdev_queue *txq;
 
1145         struct sge_qset *qs;
 
1149          * The chip min packet length is 9 octets but play safe and reject
 
1150          * anything shorter than an Ethernet header.
 
1152         if (unlikely(skb->len < ETH_HLEN)) {
 
1154                 return NETDEV_TX_OK;
 
1157         qidx = skb_get_queue_mapping(skb);
 
1159         q = &qs->txq[TXQ_ETH];
 
1160         txq = netdev_get_tx_queue(dev, qidx);
 
1162         spin_lock(&q->lock);
 
1163         reclaim_completed_tx(adap, q);
 
1165         credits = q->size - q->in_use;
 
1166         ndesc = calc_tx_descs(skb);
 
1168         if (unlikely(credits < ndesc)) {
 
1169                 t3_stop_tx_queue(txq, qs, q);
 
1170                 dev_err(&adap->pdev->dev,
 
1171                         "%s: Tx ring %u full while queue awake!\n",
 
1172                         dev->name, q->cntxt_id & 7);
 
1173                 spin_unlock(&q->lock);
 
1174                 return NETDEV_TX_BUSY;
 
1178         if (unlikely(credits - ndesc < q->stop_thres)) {
 
1179                 t3_stop_tx_queue(txq, qs, q);
 
1181                 if (should_restart_tx(q) &&
 
1182                     test_and_clear_bit(TXQ_ETH, &qs->txq_stopped)) {
 
1184                         netif_tx_wake_queue(txq);
 
1189         q->unacked += ndesc;
 
1190         compl = (q->unacked & 8) << (S_WR_COMPL - 3);
 
1194         if (q->pidx >= q->size) {
 
1199         /* update port statistics */
 
1200         if (skb->ip_summed == CHECKSUM_COMPLETE)
 
1201                 qs->port_stats[SGE_PSTAT_TX_CSUM]++;
 
1202         if (skb_shinfo(skb)->gso_size)
 
1203                 qs->port_stats[SGE_PSTAT_TSO]++;
 
1204         if (vlan_tx_tag_present(skb) && pi->vlan_grp)
 
1205                 qs->port_stats[SGE_PSTAT_VLANINS]++;
 
1207         dev->trans_start = jiffies;
 
1208         spin_unlock(&q->lock);
 
1211          * We do not use Tx completion interrupts to free DMAd Tx packets.
 
1212          * This is good for performamce but means that we rely on new Tx
 
1213          * packets arriving to run the destructors of completed packets,
 
1214          * which open up space in their sockets' send queues.  Sometimes
 
1215          * we do not get such new packets causing Tx to stall.  A single
 
1216          * UDP transmitter is a good example of this situation.  We have
 
1217          * a clean up timer that periodically reclaims completed packets
 
1218          * but it doesn't run often enough (nor do we want it to) to prevent
 
1219          * lengthy stalls.  A solution to this problem is to run the
 
1220          * destructor early, after the packet is queued but before it's DMAd.
 
1221          * A cons is that we lie to socket memory accounting, but the amount
 
1222          * of extra memory is reasonable (limited by the number of Tx
 
1223          * descriptors), the packets do actually get freed quickly by new
 
1224          * packets almost always, and for protocols like TCP that wait for
 
1225          * acks to really free up the data the extra memory is even less.
 
1226          * On the positive side we run the destructors on the sending CPU
 
1227          * rather than on a potentially different completing CPU, usually a
 
1228          * good thing.  We also run them without holding our Tx queue lock,
 
1229          * unlike what reclaim_completed_tx() would otherwise do.
 
1231          * Run the destructor before telling the DMA engine about the packet
 
1232          * to make sure it doesn't complete and get freed prematurely.
 
1234         if (likely(!skb_shared(skb)))
 
1237         write_tx_pkt_wr(adap, skb, pi, pidx, gen, q, ndesc, compl);
 
1238         check_ring_tx_db(adap, q);
 
1239         return NETDEV_TX_OK;
 
1243  *      write_imm - write a packet into a Tx descriptor as immediate data
 
1244  *      @d: the Tx descriptor to write
 
1246  *      @len: the length of packet data to write as immediate data
 
1247  *      @gen: the generation bit value to write
 
1249  *      Writes a packet as immediate data into a Tx descriptor.  The packet
 
1250  *      contains a work request at its beginning.  We must write the packet
 
1251  *      carefully so the SGE doesn't read it accidentally before it's written
 
1254 static inline void write_imm(struct tx_desc *d, struct sk_buff *skb,
 
1255                              unsigned int len, unsigned int gen)
 
1257         struct work_request_hdr *from = (struct work_request_hdr *)skb->data;
 
1258         struct work_request_hdr *to = (struct work_request_hdr *)d;
 
1260         if (likely(!skb->data_len))
 
1261                 memcpy(&to[1], &from[1], len - sizeof(*from));
 
1263                 skb_copy_bits(skb, sizeof(*from), &to[1], len - sizeof(*from));
 
1265         to->wr_hi = from->wr_hi | htonl(F_WR_SOP | F_WR_EOP |
 
1266                                         V_WR_BCNTLFLT(len & 7));
 
1268         to->wr_lo = from->wr_lo | htonl(V_WR_GEN(gen) |
 
1269                                         V_WR_LEN((len + 7) / 8));
 
1275  *      check_desc_avail - check descriptor availability on a send queue
 
1276  *      @adap: the adapter
 
1277  *      @q: the send queue
 
1278  *      @skb: the packet needing the descriptors
 
1279  *      @ndesc: the number of Tx descriptors needed
 
1280  *      @qid: the Tx queue number in its queue set (TXQ_OFLD or TXQ_CTRL)
 
1282  *      Checks if the requested number of Tx descriptors is available on an
 
1283  *      SGE send queue.  If the queue is already suspended or not enough
 
1284  *      descriptors are available the packet is queued for later transmission.
 
1285  *      Must be called with the Tx queue locked.
 
1287  *      Returns 0 if enough descriptors are available, 1 if there aren't
 
1288  *      enough descriptors and the packet has been queued, and 2 if the caller
 
1289  *      needs to retry because there weren't enough descriptors at the
 
1290  *      beginning of the call but some freed up in the mean time.
 
1292 static inline int check_desc_avail(struct adapter *adap, struct sge_txq *q,
 
1293                                    struct sk_buff *skb, unsigned int ndesc,
 
1296         if (unlikely(!skb_queue_empty(&q->sendq))) {
 
1297               addq_exit:__skb_queue_tail(&q->sendq, skb);
 
1300         if (unlikely(q->size - q->in_use < ndesc)) {
 
1301                 struct sge_qset *qs = txq_to_qset(q, qid);
 
1303                 set_bit(qid, &qs->txq_stopped);
 
1304                 smp_mb__after_clear_bit();
 
1306                 if (should_restart_tx(q) &&
 
1307                     test_and_clear_bit(qid, &qs->txq_stopped))
 
1317  *      reclaim_completed_tx_imm - reclaim completed control-queue Tx descs
 
1318  *      @q: the SGE control Tx queue
 
1320  *      This is a variant of reclaim_completed_tx() that is used for Tx queues
 
1321  *      that send only immediate data (presently just the control queues) and
 
1322  *      thus do not have any sk_buffs to release.
 
1324 static inline void reclaim_completed_tx_imm(struct sge_txq *q)
 
1326         unsigned int reclaim = q->processed - q->cleaned;
 
1328         q->in_use -= reclaim;
 
1329         q->cleaned += reclaim;
 
1332 static inline int immediate(const struct sk_buff *skb)
 
1334         return skb->len <= WR_LEN;
 
1338  *      ctrl_xmit - send a packet through an SGE control Tx queue
 
1339  *      @adap: the adapter
 
1340  *      @q: the control queue
 
1343  *      Send a packet through an SGE control Tx queue.  Packets sent through
 
1344  *      a control queue must fit entirely as immediate data in a single Tx
 
1345  *      descriptor and have no page fragments.
 
1347 static int ctrl_xmit(struct adapter *adap, struct sge_txq *q,
 
1348                      struct sk_buff *skb)
 
1351         struct work_request_hdr *wrp = (struct work_request_hdr *)skb->data;
 
1353         if (unlikely(!immediate(skb))) {
 
1356                 return NET_XMIT_SUCCESS;
 
1359         wrp->wr_hi |= htonl(F_WR_SOP | F_WR_EOP);
 
1360         wrp->wr_lo = htonl(V_WR_TID(q->token));
 
1362         spin_lock(&q->lock);
 
1363       again:reclaim_completed_tx_imm(q);
 
1365         ret = check_desc_avail(adap, q, skb, 1, TXQ_CTRL);
 
1366         if (unlikely(ret)) {
 
1368                         spin_unlock(&q->lock);
 
1374         write_imm(&q->desc[q->pidx], skb, skb->len, q->gen);
 
1377         if (++q->pidx >= q->size) {
 
1381         spin_unlock(&q->lock);
 
1383         t3_write_reg(adap, A_SG_KDOORBELL,
 
1384                      F_SELEGRCNTX | V_EGRCNTX(q->cntxt_id));
 
1385         return NET_XMIT_SUCCESS;
 
1389  *      restart_ctrlq - restart a suspended control queue
 
1390  *      @qs: the queue set cotaining the control queue
 
1392  *      Resumes transmission on a suspended Tx control queue.
 
1394 static void restart_ctrlq(unsigned long data)
 
1396         struct sk_buff *skb;
 
1397         struct sge_qset *qs = (struct sge_qset *)data;
 
1398         struct sge_txq *q = &qs->txq[TXQ_CTRL];
 
1400         spin_lock(&q->lock);
 
1401       again:reclaim_completed_tx_imm(q);
 
1403         while (q->in_use < q->size &&
 
1404                (skb = __skb_dequeue(&q->sendq)) != NULL) {
 
1406                 write_imm(&q->desc[q->pidx], skb, skb->len, q->gen);
 
1408                 if (++q->pidx >= q->size) {
 
1415         if (!skb_queue_empty(&q->sendq)) {
 
1416                 set_bit(TXQ_CTRL, &qs->txq_stopped);
 
1417                 smp_mb__after_clear_bit();
 
1419                 if (should_restart_tx(q) &&
 
1420                     test_and_clear_bit(TXQ_CTRL, &qs->txq_stopped))
 
1425         spin_unlock(&q->lock);
 
1427         t3_write_reg(qs->adap, A_SG_KDOORBELL,
 
1428                      F_SELEGRCNTX | V_EGRCNTX(q->cntxt_id));
 
1432  * Send a management message through control queue 0
 
1434 int t3_mgmt_tx(struct adapter *adap, struct sk_buff *skb)
 
1438         ret = ctrl_xmit(adap, &adap->sge.qs[0].txq[TXQ_CTRL], skb);
 
1445  *      deferred_unmap_destructor - unmap a packet when it is freed
 
1448  *      This is the packet destructor used for Tx packets that need to remain
 
1449  *      mapped until they are freed rather than until their Tx descriptors are
 
1452 static void deferred_unmap_destructor(struct sk_buff *skb)
 
1455         const dma_addr_t *p;
 
1456         const struct skb_shared_info *si;
 
1457         const struct deferred_unmap_info *dui;
 
1459         dui = (struct deferred_unmap_info *)skb->head;
 
1462         if (skb->tail - skb->transport_header)
 
1463                 pci_unmap_single(dui->pdev, *p++,
 
1464                                  skb->tail - skb->transport_header,
 
1467         si = skb_shinfo(skb);
 
1468         for (i = 0; i < si->nr_frags; i++)
 
1469                 pci_unmap_page(dui->pdev, *p++, si->frags[i].size,
 
1473 static void setup_deferred_unmapping(struct sk_buff *skb, struct pci_dev *pdev,
 
1474                                      const struct sg_ent *sgl, int sgl_flits)
 
1477         struct deferred_unmap_info *dui;
 
1479         dui = (struct deferred_unmap_info *)skb->head;
 
1481         for (p = dui->addr; sgl_flits >= 3; sgl++, sgl_flits -= 3) {
 
1482                 *p++ = be64_to_cpu(sgl->addr[0]);
 
1483                 *p++ = be64_to_cpu(sgl->addr[1]);
 
1486                 *p = be64_to_cpu(sgl->addr[0]);
 
1490  *      write_ofld_wr - write an offload work request
 
1491  *      @adap: the adapter
 
1492  *      @skb: the packet to send
 
1494  *      @pidx: index of the first Tx descriptor to write
 
1495  *      @gen: the generation value to use
 
1496  *      @ndesc: number of descriptors the packet will occupy
 
1498  *      Write an offload work request to send the supplied packet.  The packet
 
1499  *      data already carry the work request with most fields populated.
 
1501 static void write_ofld_wr(struct adapter *adap, struct sk_buff *skb,
 
1502                           struct sge_txq *q, unsigned int pidx,
 
1503                           unsigned int gen, unsigned int ndesc)
 
1505         unsigned int sgl_flits, flits;
 
1506         struct work_request_hdr *from;
 
1507         struct sg_ent *sgp, sgl[MAX_SKB_FRAGS / 2 + 1];
 
1508         struct tx_desc *d = &q->desc[pidx];
 
1510         if (immediate(skb)) {
 
1511                 q->sdesc[pidx].skb = NULL;
 
1512                 write_imm(d, skb, skb->len, gen);
 
1516         /* Only TX_DATA builds SGLs */
 
1518         from = (struct work_request_hdr *)skb->data;
 
1519         memcpy(&d->flit[1], &from[1],
 
1520                skb_transport_offset(skb) - sizeof(*from));
 
1522         flits = skb_transport_offset(skb) / 8;
 
1523         sgp = ndesc == 1 ? (struct sg_ent *)&d->flit[flits] : sgl;
 
1524         sgl_flits = make_sgl(skb, sgp, skb_transport_header(skb),
 
1525                              skb->tail - skb->transport_header,
 
1527         if (need_skb_unmap()) {
 
1528                 setup_deferred_unmapping(skb, adap->pdev, sgp, sgl_flits);
 
1529                 skb->destructor = deferred_unmap_destructor;
 
1532         write_wr_hdr_sgl(ndesc, skb, d, pidx, q, sgl, flits, sgl_flits,
 
1533                          gen, from->wr_hi, from->wr_lo);
 
1537  *      calc_tx_descs_ofld - calculate # of Tx descriptors for an offload packet
 
1540  *      Returns the number of Tx descriptors needed for the given offload
 
1541  *      packet.  These packets are already fully constructed.
 
1543 static inline unsigned int calc_tx_descs_ofld(const struct sk_buff *skb)
 
1545         unsigned int flits, cnt;
 
1547         if (skb->len <= WR_LEN)
 
1548                 return 1;       /* packet fits as immediate data */
 
1550         flits = skb_transport_offset(skb) / 8;  /* headers */
 
1551         cnt = skb_shinfo(skb)->nr_frags;
 
1552         if (skb->tail != skb->transport_header)
 
1554         return flits_to_desc(flits + sgl_len(cnt));
 
1558  *      ofld_xmit - send a packet through an offload queue
 
1559  *      @adap: the adapter
 
1560  *      @q: the Tx offload queue
 
1563  *      Send an offload packet through an SGE offload queue.
 
1565 static int ofld_xmit(struct adapter *adap, struct sge_txq *q,
 
1566                      struct sk_buff *skb)
 
1569         unsigned int ndesc = calc_tx_descs_ofld(skb), pidx, gen;
 
1571         spin_lock(&q->lock);
 
1572       again:reclaim_completed_tx(adap, q);
 
1574         ret = check_desc_avail(adap, q, skb, ndesc, TXQ_OFLD);
 
1575         if (unlikely(ret)) {
 
1577                         skb->priority = ndesc;  /* save for restart */
 
1578                         spin_unlock(&q->lock);
 
1588         if (q->pidx >= q->size) {
 
1592         spin_unlock(&q->lock);
 
1594         write_ofld_wr(adap, skb, q, pidx, gen, ndesc);
 
1595         check_ring_tx_db(adap, q);
 
1596         return NET_XMIT_SUCCESS;
 
1600  *      restart_offloadq - restart a suspended offload queue
 
1601  *      @qs: the queue set cotaining the offload queue
 
1603  *      Resumes transmission on a suspended Tx offload queue.
 
1605 static void restart_offloadq(unsigned long data)
 
1607         struct sk_buff *skb;
 
1608         struct sge_qset *qs = (struct sge_qset *)data;
 
1609         struct sge_txq *q = &qs->txq[TXQ_OFLD];
 
1610         const struct port_info *pi = netdev_priv(qs->netdev);
 
1611         struct adapter *adap = pi->adapter;
 
1613         spin_lock(&q->lock);
 
1614       again:reclaim_completed_tx(adap, q);
 
1616         while ((skb = skb_peek(&q->sendq)) != NULL) {
 
1617                 unsigned int gen, pidx;
 
1618                 unsigned int ndesc = skb->priority;
 
1620                 if (unlikely(q->size - q->in_use < ndesc)) {
 
1621                         set_bit(TXQ_OFLD, &qs->txq_stopped);
 
1622                         smp_mb__after_clear_bit();
 
1624                         if (should_restart_tx(q) &&
 
1625                             test_and_clear_bit(TXQ_OFLD, &qs->txq_stopped))
 
1635                 if (q->pidx >= q->size) {
 
1639                 __skb_unlink(skb, &q->sendq);
 
1640                 spin_unlock(&q->lock);
 
1642                 write_ofld_wr(adap, skb, q, pidx, gen, ndesc);
 
1643                 spin_lock(&q->lock);
 
1645         spin_unlock(&q->lock);
 
1648         set_bit(TXQ_RUNNING, &q->flags);
 
1649         set_bit(TXQ_LAST_PKT_DB, &q->flags);
 
1652         t3_write_reg(adap, A_SG_KDOORBELL,
 
1653                      F_SELEGRCNTX | V_EGRCNTX(q->cntxt_id));
 
1657  *      queue_set - return the queue set a packet should use
 
1660  *      Maps a packet to the SGE queue set it should use.  The desired queue
 
1661  *      set is carried in bits 1-3 in the packet's priority.
 
1663 static inline int queue_set(const struct sk_buff *skb)
 
1665         return skb->priority >> 1;
 
1669  *      is_ctrl_pkt - return whether an offload packet is a control packet
 
1672  *      Determines whether an offload packet should use an OFLD or a CTRL
 
1673  *      Tx queue.  This is indicated by bit 0 in the packet's priority.
 
1675 static inline int is_ctrl_pkt(const struct sk_buff *skb)
 
1677         return skb->priority & 1;
 
1681  *      t3_offload_tx - send an offload packet
 
1682  *      @tdev: the offload device to send to
 
1685  *      Sends an offload packet.  We use the packet priority to select the
 
1686  *      appropriate Tx queue as follows: bit 0 indicates whether the packet
 
1687  *      should be sent as regular or control, bits 1-3 select the queue set.
 
1689 int t3_offload_tx(struct t3cdev *tdev, struct sk_buff *skb)
 
1691         struct adapter *adap = tdev2adap(tdev);
 
1692         struct sge_qset *qs = &adap->sge.qs[queue_set(skb)];
 
1694         if (unlikely(is_ctrl_pkt(skb)))
 
1695                 return ctrl_xmit(adap, &qs->txq[TXQ_CTRL], skb);
 
1697         return ofld_xmit(adap, &qs->txq[TXQ_OFLD], skb);
 
1701  *      offload_enqueue - add an offload packet to an SGE offload receive queue
 
1702  *      @q: the SGE response queue
 
1705  *      Add a new offload packet to an SGE response queue's offload packet
 
1706  *      queue.  If the packet is the first on the queue it schedules the RX
 
1707  *      softirq to process the queue.
 
1709 static inline void offload_enqueue(struct sge_rspq *q, struct sk_buff *skb)
 
1711         int was_empty = skb_queue_empty(&q->rx_queue);
 
1713         __skb_queue_tail(&q->rx_queue, skb);
 
1716                 struct sge_qset *qs = rspq_to_qset(q);
 
1718                 napi_schedule(&qs->napi);
 
1723  *      deliver_partial_bundle - deliver a (partial) bundle of Rx offload pkts
 
1724  *      @tdev: the offload device that will be receiving the packets
 
1725  *      @q: the SGE response queue that assembled the bundle
 
1726  *      @skbs: the partial bundle
 
1727  *      @n: the number of packets in the bundle
 
1729  *      Delivers a (partial) bundle of Rx offload packets to an offload device.
 
1731 static inline void deliver_partial_bundle(struct t3cdev *tdev,
 
1733                                           struct sk_buff *skbs[], int n)
 
1736                 q->offload_bundles++;
 
1737                 tdev->recv(tdev, skbs, n);
 
1742  *      ofld_poll - NAPI handler for offload packets in interrupt mode
 
1743  *      @dev: the network device doing the polling
 
1744  *      @budget: polling budget
 
1746  *      The NAPI handler for offload packets when a response queue is serviced
 
1747  *      by the hard interrupt handler, i.e., when it's operating in non-polling
 
1748  *      mode.  Creates small packet batches and sends them through the offload
 
1749  *      receive handler.  Batches need to be of modest size as we do prefetches
 
1750  *      on the packets in each.
 
1752 static int ofld_poll(struct napi_struct *napi, int budget)
 
1754         struct sge_qset *qs = container_of(napi, struct sge_qset, napi);
 
1755         struct sge_rspq *q = &qs->rspq;
 
1756         struct adapter *adapter = qs->adap;
 
1759         while (work_done < budget) {
 
1760                 struct sk_buff *skb, *tmp, *skbs[RX_BUNDLE_SIZE];
 
1761                 struct sk_buff_head queue;
 
1764                 spin_lock_irq(&q->lock);
 
1765                 __skb_queue_head_init(&queue);
 
1766                 skb_queue_splice_init(&q->rx_queue, &queue);
 
1767                 if (skb_queue_empty(&queue)) {
 
1768                         napi_complete(napi);
 
1769                         spin_unlock_irq(&q->lock);
 
1772                 spin_unlock_irq(&q->lock);
 
1775                 skb_queue_walk_safe(&queue, skb, tmp) {
 
1776                         if (work_done >= budget)
 
1780                         __skb_unlink(skb, &queue);
 
1781                         prefetch(skb->data);
 
1782                         skbs[ngathered] = skb;
 
1783                         if (++ngathered == RX_BUNDLE_SIZE) {
 
1784                                 q->offload_bundles++;
 
1785                                 adapter->tdev.recv(&adapter->tdev, skbs,
 
1790                 if (!skb_queue_empty(&queue)) {
 
1791                         /* splice remaining packets back onto Rx queue */
 
1792                         spin_lock_irq(&q->lock);
 
1793                         skb_queue_splice(&queue, &q->rx_queue);
 
1794                         spin_unlock_irq(&q->lock);
 
1796                 deliver_partial_bundle(&adapter->tdev, q, skbs, ngathered);
 
1803  *      rx_offload - process a received offload packet
 
1804  *      @tdev: the offload device receiving the packet
 
1805  *      @rq: the response queue that received the packet
 
1807  *      @rx_gather: a gather list of packets if we are building a bundle
 
1808  *      @gather_idx: index of the next available slot in the bundle
 
1810  *      Process an ingress offload pakcet and add it to the offload ingress
 
1811  *      queue.  Returns the index of the next available slot in the bundle.
 
1813 static inline int rx_offload(struct t3cdev *tdev, struct sge_rspq *rq,
 
1814                              struct sk_buff *skb, struct sk_buff *rx_gather[],
 
1815                              unsigned int gather_idx)
 
1817         skb_reset_mac_header(skb);
 
1818         skb_reset_network_header(skb);
 
1819         skb_reset_transport_header(skb);
 
1822                 rx_gather[gather_idx++] = skb;
 
1823                 if (gather_idx == RX_BUNDLE_SIZE) {
 
1824                         tdev->recv(tdev, rx_gather, RX_BUNDLE_SIZE);
 
1826                         rq->offload_bundles++;
 
1829                 offload_enqueue(rq, skb);
 
1835  *      restart_tx - check whether to restart suspended Tx queues
 
1836  *      @qs: the queue set to resume
 
1838  *      Restarts suspended Tx queues of an SGE queue set if they have enough
 
1839  *      free resources to resume operation.
 
1841 static void restart_tx(struct sge_qset *qs)
 
1843         if (test_bit(TXQ_ETH, &qs->txq_stopped) &&
 
1844             should_restart_tx(&qs->txq[TXQ_ETH]) &&
 
1845             test_and_clear_bit(TXQ_ETH, &qs->txq_stopped)) {
 
1846                 qs->txq[TXQ_ETH].restarts++;
 
1847                 if (netif_running(qs->netdev))
 
1848                         netif_tx_wake_queue(qs->tx_q);
 
1851         if (test_bit(TXQ_OFLD, &qs->txq_stopped) &&
 
1852             should_restart_tx(&qs->txq[TXQ_OFLD]) &&
 
1853             test_and_clear_bit(TXQ_OFLD, &qs->txq_stopped)) {
 
1854                 qs->txq[TXQ_OFLD].restarts++;
 
1855                 tasklet_schedule(&qs->txq[TXQ_OFLD].qresume_tsk);
 
1857         if (test_bit(TXQ_CTRL, &qs->txq_stopped) &&
 
1858             should_restart_tx(&qs->txq[TXQ_CTRL]) &&
 
1859             test_and_clear_bit(TXQ_CTRL, &qs->txq_stopped)) {
 
1860                 qs->txq[TXQ_CTRL].restarts++;
 
1861                 tasklet_schedule(&qs->txq[TXQ_CTRL].qresume_tsk);
 
1866  *      cxgb3_arp_process - process an ARP request probing a private IP address
 
1867  *      @adapter: the adapter
 
1868  *      @skb: the skbuff containing the ARP request
 
1870  *      Check if the ARP request is probing the private IP address
 
1871  *      dedicated to iSCSI, generate an ARP reply if so.
 
1873 static void cxgb3_arp_process(struct adapter *adapter, struct sk_buff *skb)
 
1875         struct net_device *dev = skb->dev;
 
1876         struct port_info *pi;
 
1878         unsigned char *arp_ptr;
 
1885         skb_reset_network_header(skb);
 
1888         if (arp->ar_op != htons(ARPOP_REQUEST))
 
1891         arp_ptr = (unsigned char *)(arp + 1);
 
1893         arp_ptr += dev->addr_len;
 
1894         memcpy(&sip, arp_ptr, sizeof(sip));
 
1895         arp_ptr += sizeof(sip);
 
1896         arp_ptr += dev->addr_len;
 
1897         memcpy(&tip, arp_ptr, sizeof(tip));
 
1899         pi = netdev_priv(dev);
 
1900         if (tip != pi->iscsi_ipv4addr)
 
1903         arp_send(ARPOP_REPLY, ETH_P_ARP, sip, dev, tip, sha,
 
1904                  dev->dev_addr, sha);
 
1908 static inline int is_arp(struct sk_buff *skb)
 
1910         return skb->protocol == htons(ETH_P_ARP);
 
1914  *      rx_eth - process an ingress ethernet packet
 
1915  *      @adap: the adapter
 
1916  *      @rq: the response queue that received the packet
 
1918  *      @pad: amount of padding at the start of the buffer
 
1920  *      Process an ingress ethernet pakcet and deliver it to the stack.
 
1921  *      The padding is 2 if the packet was delivered in an Rx buffer and 0
 
1922  *      if it was immediate data in a response.
 
1924 static void rx_eth(struct adapter *adap, struct sge_rspq *rq,
 
1925                    struct sk_buff *skb, int pad, int lro)
 
1927         struct cpl_rx_pkt *p = (struct cpl_rx_pkt *)(skb->data + pad);
 
1928         struct sge_qset *qs = rspq_to_qset(rq);
 
1929         struct port_info *pi;
 
1931         skb_pull(skb, sizeof(*p) + pad);
 
1932         skb->protocol = eth_type_trans(skb, adap->port[p->iff]);
 
1933         pi = netdev_priv(skb->dev);
 
1934         if ((pi->rx_offload & T3_RX_CSUM) && p->csum_valid && p->csum == htons(0xffff) &&
 
1936                 qs->port_stats[SGE_PSTAT_RX_CSUM_GOOD]++;
 
1937                 skb->ip_summed = CHECKSUM_UNNECESSARY;
 
1939                 skb->ip_summed = CHECKSUM_NONE;
 
1941         if (unlikely(p->vlan_valid)) {
 
1942                 struct vlan_group *grp = pi->vlan_grp;
 
1944                 qs->port_stats[SGE_PSTAT_VLANEX]++;
 
1947                                 vlan_gro_receive(&qs->napi, grp,
 
1948                                                  ntohs(p->vlan), skb);
 
1950                                 if (unlikely(pi->iscsi_ipv4addr &&
 
1952                                         unsigned short vtag = ntohs(p->vlan) &
 
1954                                         skb->dev = vlan_group_get_device(grp,
 
1956                                         cxgb3_arp_process(adap, skb);
 
1958                                 __vlan_hwaccel_rx(skb, grp, ntohs(p->vlan),
 
1962                         dev_kfree_skb_any(skb);
 
1963         } else if (rq->polling) {
 
1965                         napi_gro_receive(&qs->napi, skb);
 
1967                         if (unlikely(pi->iscsi_ipv4addr && is_arp(skb)))
 
1968                                 cxgb3_arp_process(adap, skb);
 
1969                         netif_receive_skb(skb);
 
1975 static inline int is_eth_tcp(u32 rss)
 
1977         return G_HASHTYPE(ntohl(rss)) == RSS_HASH_4_TUPLE;
 
1981  *      lro_add_page - add a page chunk to an LRO session
 
1982  *      @adap: the adapter
 
1983  *      @qs: the associated queue set
 
1984  *      @fl: the free list containing the page chunk to add
 
1985  *      @len: packet length
 
1986  *      @complete: Indicates the last fragment of a frame
 
1988  *      Add a received packet contained in a page chunk to an existing LRO
 
1991 static void lro_add_page(struct adapter *adap, struct sge_qset *qs,
 
1992                          struct sge_fl *fl, int len, int complete)
 
1994         struct rx_sw_desc *sd = &fl->sdesc[fl->cidx];
 
1995         struct cpl_rx_pkt *cpl;
 
1996         struct skb_frag_struct *rx_frag = qs->lro_frag_tbl.frags;
 
1997         int nr_frags = qs->lro_frag_tbl.nr_frags;
 
1998         int frag_len = qs->lro_frag_tbl.len;
 
2002                 offset = 2 + sizeof(struct cpl_rx_pkt);
 
2003                 qs->lro_va = cpl = sd->pg_chunk.va + 2;
 
2009         pci_unmap_single(adap->pdev, pci_unmap_addr(sd, dma_addr),
 
2010                          fl->buf_size, PCI_DMA_FROMDEVICE);
 
2012         rx_frag += nr_frags;
 
2013         rx_frag->page = sd->pg_chunk.page;
 
2014         rx_frag->page_offset = sd->pg_chunk.offset + offset;
 
2015         rx_frag->size = len;
 
2017         qs->lro_frag_tbl.nr_frags++;
 
2018         qs->lro_frag_tbl.len = frag_len;
 
2023         qs->lro_frag_tbl.ip_summed = CHECKSUM_UNNECESSARY;
 
2026         if (unlikely(cpl->vlan_valid)) {
 
2027                 struct net_device *dev = qs->netdev;
 
2028                 struct port_info *pi = netdev_priv(dev);
 
2029                 struct vlan_group *grp = pi->vlan_grp;
 
2031                 if (likely(grp != NULL)) {
 
2032                         vlan_gro_frags(&qs->napi, grp, ntohs(cpl->vlan),
 
2037         napi_gro_frags(&qs->napi, &qs->lro_frag_tbl);
 
2040         qs->lro_frag_tbl.nr_frags = qs->lro_frag_tbl.len = 0;
 
2044  *      handle_rsp_cntrl_info - handles control information in a response
 
2045  *      @qs: the queue set corresponding to the response
 
2046  *      @flags: the response control flags
 
2048  *      Handles the control information of an SGE response, such as GTS
 
2049  *      indications and completion credits for the queue set's Tx queues.
 
2050  *      HW coalesces credits, we don't do any extra SW coalescing.
 
2052 static inline void handle_rsp_cntrl_info(struct sge_qset *qs, u32 flags)
 
2054         unsigned int credits;
 
2057         if (flags & F_RSPD_TXQ0_GTS)
 
2058                 clear_bit(TXQ_RUNNING, &qs->txq[TXQ_ETH].flags);
 
2061         credits = G_RSPD_TXQ0_CR(flags);
 
2063                 qs->txq[TXQ_ETH].processed += credits;
 
2065         credits = G_RSPD_TXQ2_CR(flags);
 
2067                 qs->txq[TXQ_CTRL].processed += credits;
 
2070         if (flags & F_RSPD_TXQ1_GTS)
 
2071                 clear_bit(TXQ_RUNNING, &qs->txq[TXQ_OFLD].flags);
 
2073         credits = G_RSPD_TXQ1_CR(flags);
 
2075                 qs->txq[TXQ_OFLD].processed += credits;
 
2079  *      check_ring_db - check if we need to ring any doorbells
 
2080  *      @adapter: the adapter
 
2081  *      @qs: the queue set whose Tx queues are to be examined
 
2082  *      @sleeping: indicates which Tx queue sent GTS
 
2084  *      Checks if some of a queue set's Tx queues need to ring their doorbells
 
2085  *      to resume transmission after idling while they still have unprocessed
 
2088 static void check_ring_db(struct adapter *adap, struct sge_qset *qs,
 
2089                           unsigned int sleeping)
 
2091         if (sleeping & F_RSPD_TXQ0_GTS) {
 
2092                 struct sge_txq *txq = &qs->txq[TXQ_ETH];
 
2094                 if (txq->cleaned + txq->in_use != txq->processed &&
 
2095                     !test_and_set_bit(TXQ_LAST_PKT_DB, &txq->flags)) {
 
2096                         set_bit(TXQ_RUNNING, &txq->flags);
 
2097                         t3_write_reg(adap, A_SG_KDOORBELL, F_SELEGRCNTX |
 
2098                                      V_EGRCNTX(txq->cntxt_id));
 
2102         if (sleeping & F_RSPD_TXQ1_GTS) {
 
2103                 struct sge_txq *txq = &qs->txq[TXQ_OFLD];
 
2105                 if (txq->cleaned + txq->in_use != txq->processed &&
 
2106                     !test_and_set_bit(TXQ_LAST_PKT_DB, &txq->flags)) {
 
2107                         set_bit(TXQ_RUNNING, &txq->flags);
 
2108                         t3_write_reg(adap, A_SG_KDOORBELL, F_SELEGRCNTX |
 
2109                                      V_EGRCNTX(txq->cntxt_id));
 
2115  *      is_new_response - check if a response is newly written
 
2116  *      @r: the response descriptor
 
2117  *      @q: the response queue
 
2119  *      Returns true if a response descriptor contains a yet unprocessed
 
2122 static inline int is_new_response(const struct rsp_desc *r,
 
2123                                   const struct sge_rspq *q)
 
2125         return (r->intr_gen & F_RSPD_GEN2) == q->gen;
 
2128 static inline void clear_rspq_bufstate(struct sge_rspq * const q)
 
2131         q->rx_recycle_buf = 0;
 
2134 #define RSPD_GTS_MASK  (F_RSPD_TXQ0_GTS | F_RSPD_TXQ1_GTS)
 
2135 #define RSPD_CTRL_MASK (RSPD_GTS_MASK | \
 
2136                         V_RSPD_TXQ0_CR(M_RSPD_TXQ0_CR) | \
 
2137                         V_RSPD_TXQ1_CR(M_RSPD_TXQ1_CR) | \
 
2138                         V_RSPD_TXQ2_CR(M_RSPD_TXQ2_CR))
 
2140 /* How long to delay the next interrupt in case of memory shortage, in 0.1us. */
 
2141 #define NOMEM_INTR_DELAY 2500
 
2144  *      process_responses - process responses from an SGE response queue
 
2145  *      @adap: the adapter
 
2146  *      @qs: the queue set to which the response queue belongs
 
2147  *      @budget: how many responses can be processed in this round
 
2149  *      Process responses from an SGE response queue up to the supplied budget.
 
2150  *      Responses include received packets as well as credits and other events
 
2151  *      for the queues that belong to the response queue's queue set.
 
2152  *      A negative budget is effectively unlimited.
 
2154  *      Additionally choose the interrupt holdoff time for the next interrupt
 
2155  *      on this queue.  If the system is under memory shortage use a fairly
 
2156  *      long delay to help recovery.
 
2158 static int process_responses(struct adapter *adap, struct sge_qset *qs,
 
2161         struct sge_rspq *q = &qs->rspq;
 
2162         struct rsp_desc *r = &q->desc[q->cidx];
 
2163         int budget_left = budget;
 
2164         unsigned int sleeping = 0;
 
2165         struct sk_buff *offload_skbs[RX_BUNDLE_SIZE];
 
2168         q->next_holdoff = q->holdoff_tmr;
 
2170         while (likely(budget_left && is_new_response(r, q))) {
 
2171                 int packet_complete, eth, ethpad = 2, lro = qs->lro_enabled;
 
2172                 struct sk_buff *skb = NULL;
 
2173                 u32 len, flags = ntohl(r->flags);
 
2174                 __be32 rss_hi = *(const __be32 *)r,
 
2175                        rss_lo = r->rss_hdr.rss_hash_val;
 
2177                 eth = r->rss_hdr.opcode == CPL_RX_PKT;
 
2179                 if (unlikely(flags & F_RSPD_ASYNC_NOTIF)) {
 
2180                         skb = alloc_skb(AN_PKT_SIZE, GFP_ATOMIC);
 
2184                         memcpy(__skb_put(skb, AN_PKT_SIZE), r, AN_PKT_SIZE);
 
2185                         skb->data[0] = CPL_ASYNC_NOTIF;
 
2186                         rss_hi = htonl(CPL_ASYNC_NOTIF << 24);
 
2188                 } else if (flags & F_RSPD_IMM_DATA_VALID) {
 
2189                         skb = get_imm_packet(r);
 
2190                         if (unlikely(!skb)) {
 
2192                                 q->next_holdoff = NOMEM_INTR_DELAY;
 
2194                                 /* consume one credit since we tried */
 
2200                 } else if ((len = ntohl(r->len_cq)) != 0) {
 
2204                                 lro = qs->lro_enabled && is_eth_tcp(rss_hi);
 
2206                         fl = (len & F_RSPD_FLQ) ? &qs->fl[1] : &qs->fl[0];
 
2207                         if (fl->use_pages) {
 
2208                                 void *addr = fl->sdesc[fl->cidx].pg_chunk.va;
 
2211 #if L1_CACHE_BYTES < 128
 
2212                                 prefetch(addr + L1_CACHE_BYTES);
 
2214                                 __refill_fl(adap, fl);
 
2216                                         lro_add_page(adap, qs, fl,
 
2218                                                      flags & F_RSPD_EOP);
 
2222                                 skb = get_packet_pg(adap, fl, q,
 
2225                                                     SGE_RX_DROP_THRES : 0);
 
2228                                 skb = get_packet(adap, fl, G_RSPD_LEN(len),
 
2229                                                  eth ? SGE_RX_DROP_THRES : 0);
 
2230                         if (unlikely(!skb)) {
 
2234                         } else if (unlikely(r->rss_hdr.opcode == CPL_TRACE_PKT))
 
2237                         if (++fl->cidx == fl->size)
 
2242                 if (flags & RSPD_CTRL_MASK) {
 
2243                         sleeping |= flags & RSPD_GTS_MASK;
 
2244                         handle_rsp_cntrl_info(qs, flags);
 
2248                 if (unlikely(++q->cidx == q->size)) {
 
2255                 if (++q->credits >= (q->size / 4)) {
 
2256                         refill_rspq(adap, q, q->credits);
 
2260                 packet_complete = flags &
 
2261                                   (F_RSPD_EOP | F_RSPD_IMM_DATA_VALID |
 
2262                                    F_RSPD_ASYNC_NOTIF);
 
2264                 if (skb != NULL && packet_complete) {
 
2266                                 rx_eth(adap, q, skb, ethpad, lro);
 
2269                                 /* Preserve the RSS info in csum & priority */
 
2271                                 skb->priority = rss_lo;
 
2272                                 ngathered = rx_offload(&adap->tdev, q, skb,
 
2277                         if (flags & F_RSPD_EOP)
 
2278                                 clear_rspq_bufstate(q);
 
2283         deliver_partial_bundle(&adap->tdev, q, offload_skbs, ngathered);
 
2286                 check_ring_db(adap, qs, sleeping);
 
2288         smp_mb();               /* commit Tx queue .processed updates */
 
2289         if (unlikely(qs->txq_stopped != 0))
 
2292         budget -= budget_left;
 
2296 static inline int is_pure_response(const struct rsp_desc *r)
 
2298         __be32 n = r->flags & htonl(F_RSPD_ASYNC_NOTIF | F_RSPD_IMM_DATA_VALID);
 
2300         return (n | r->len_cq) == 0;
 
2304  *      napi_rx_handler - the NAPI handler for Rx processing
 
2305  *      @napi: the napi instance
 
2306  *      @budget: how many packets we can process in this round
 
2308  *      Handler for new data events when using NAPI.
 
2310 static int napi_rx_handler(struct napi_struct *napi, int budget)
 
2312         struct sge_qset *qs = container_of(napi, struct sge_qset, napi);
 
2313         struct adapter *adap = qs->adap;
 
2314         int work_done = process_responses(adap, qs, budget);
 
2316         if (likely(work_done < budget)) {
 
2317                 napi_complete(napi);
 
2320                  * Because we don't atomically flush the following
 
2321                  * write it is possible that in very rare cases it can
 
2322                  * reach the device in a way that races with a new
 
2323                  * response being written plus an error interrupt
 
2324                  * causing the NAPI interrupt handler below to return
 
2325                  * unhandled status to the OS.  To protect against
 
2326                  * this would require flushing the write and doing
 
2327                  * both the write and the flush with interrupts off.
 
2328                  * Way too expensive and unjustifiable given the
 
2329                  * rarity of the race.
 
2331                  * The race cannot happen at all with MSI-X.
 
2333                 t3_write_reg(adap, A_SG_GTS, V_RSPQ(qs->rspq.cntxt_id) |
 
2334                              V_NEWTIMER(qs->rspq.next_holdoff) |
 
2335                              V_NEWINDEX(qs->rspq.cidx));
 
2341  * Returns true if the device is already scheduled for polling.
 
2343 static inline int napi_is_scheduled(struct napi_struct *napi)
 
2345         return test_bit(NAPI_STATE_SCHED, &napi->state);
 
2349  *      process_pure_responses - process pure responses from a response queue
 
2350  *      @adap: the adapter
 
2351  *      @qs: the queue set owning the response queue
 
2352  *      @r: the first pure response to process
 
2354  *      A simpler version of process_responses() that handles only pure (i.e.,
 
2355  *      non data-carrying) responses.  Such respones are too light-weight to
 
2356  *      justify calling a softirq under NAPI, so we handle them specially in
 
2357  *      the interrupt handler.  The function is called with a pointer to a
 
2358  *      response, which the caller must ensure is a valid pure response.
 
2360  *      Returns 1 if it encounters a valid data-carrying response, 0 otherwise.
 
2362 static int process_pure_responses(struct adapter *adap, struct sge_qset *qs,
 
2365         struct sge_rspq *q = &qs->rspq;
 
2366         unsigned int sleeping = 0;
 
2369                 u32 flags = ntohl(r->flags);
 
2372                 if (unlikely(++q->cidx == q->size)) {
 
2379                 if (flags & RSPD_CTRL_MASK) {
 
2380                         sleeping |= flags & RSPD_GTS_MASK;
 
2381                         handle_rsp_cntrl_info(qs, flags);
 
2385                 if (++q->credits >= (q->size / 4)) {
 
2386                         refill_rspq(adap, q, q->credits);
 
2389         } while (is_new_response(r, q) && is_pure_response(r));
 
2392                 check_ring_db(adap, qs, sleeping);
 
2394         smp_mb();               /* commit Tx queue .processed updates */
 
2395         if (unlikely(qs->txq_stopped != 0))
 
2398         return is_new_response(r, q);
 
2402  *      handle_responses - decide what to do with new responses in NAPI mode
 
2403  *      @adap: the adapter
 
2404  *      @q: the response queue
 
2406  *      This is used by the NAPI interrupt handlers to decide what to do with
 
2407  *      new SGE responses.  If there are no new responses it returns -1.  If
 
2408  *      there are new responses and they are pure (i.e., non-data carrying)
 
2409  *      it handles them straight in hard interrupt context as they are very
 
2410  *      cheap and don't deliver any packets.  Finally, if there are any data
 
2411  *      signaling responses it schedules the NAPI handler.  Returns 1 if it
 
2412  *      schedules NAPI, 0 if all new responses were pure.
 
2414  *      The caller must ascertain NAPI is not already running.
 
2416 static inline int handle_responses(struct adapter *adap, struct sge_rspq *q)
 
2418         struct sge_qset *qs = rspq_to_qset(q);
 
2419         struct rsp_desc *r = &q->desc[q->cidx];
 
2421         if (!is_new_response(r, q))
 
2423         if (is_pure_response(r) && process_pure_responses(adap, qs, r) == 0) {
 
2424                 t3_write_reg(adap, A_SG_GTS, V_RSPQ(q->cntxt_id) |
 
2425                              V_NEWTIMER(q->holdoff_tmr) | V_NEWINDEX(q->cidx));
 
2428         napi_schedule(&qs->napi);
 
2433  * The MSI-X interrupt handler for an SGE response queue for the non-NAPI case
 
2434  * (i.e., response queue serviced in hard interrupt).
 
2436 irqreturn_t t3_sge_intr_msix(int irq, void *cookie)
 
2438         struct sge_qset *qs = cookie;
 
2439         struct adapter *adap = qs->adap;
 
2440         struct sge_rspq *q = &qs->rspq;
 
2442         spin_lock(&q->lock);
 
2443         if (process_responses(adap, qs, -1) == 0)
 
2444                 q->unhandled_irqs++;
 
2445         t3_write_reg(adap, A_SG_GTS, V_RSPQ(q->cntxt_id) |
 
2446                      V_NEWTIMER(q->next_holdoff) | V_NEWINDEX(q->cidx));
 
2447         spin_unlock(&q->lock);
 
2452  * The MSI-X interrupt handler for an SGE response queue for the NAPI case
 
2453  * (i.e., response queue serviced by NAPI polling).
 
2455 static irqreturn_t t3_sge_intr_msix_napi(int irq, void *cookie)
 
2457         struct sge_qset *qs = cookie;
 
2458         struct sge_rspq *q = &qs->rspq;
 
2460         spin_lock(&q->lock);
 
2462         if (handle_responses(qs->adap, q) < 0)
 
2463                 q->unhandled_irqs++;
 
2464         spin_unlock(&q->lock);
 
2469  * The non-NAPI MSI interrupt handler.  This needs to handle data events from
 
2470  * SGE response queues as well as error and other async events as they all use
 
2471  * the same MSI vector.  We use one SGE response queue per port in this mode
 
2472  * and protect all response queues with queue 0's lock.
 
2474 static irqreturn_t t3_intr_msi(int irq, void *cookie)
 
2476         int new_packets = 0;
 
2477         struct adapter *adap = cookie;
 
2478         struct sge_rspq *q = &adap->sge.qs[0].rspq;
 
2480         spin_lock(&q->lock);
 
2482         if (process_responses(adap, &adap->sge.qs[0], -1)) {
 
2483                 t3_write_reg(adap, A_SG_GTS, V_RSPQ(q->cntxt_id) |
 
2484                              V_NEWTIMER(q->next_holdoff) | V_NEWINDEX(q->cidx));
 
2488         if (adap->params.nports == 2 &&
 
2489             process_responses(adap, &adap->sge.qs[1], -1)) {
 
2490                 struct sge_rspq *q1 = &adap->sge.qs[1].rspq;
 
2492                 t3_write_reg(adap, A_SG_GTS, V_RSPQ(q1->cntxt_id) |
 
2493                              V_NEWTIMER(q1->next_holdoff) |
 
2494                              V_NEWINDEX(q1->cidx));
 
2498         if (!new_packets && t3_slow_intr_handler(adap) == 0)
 
2499                 q->unhandled_irqs++;
 
2501         spin_unlock(&q->lock);
 
2505 static int rspq_check_napi(struct sge_qset *qs)
 
2507         struct sge_rspq *q = &qs->rspq;
 
2509         if (!napi_is_scheduled(&qs->napi) &&
 
2510             is_new_response(&q->desc[q->cidx], q)) {
 
2511                 napi_schedule(&qs->napi);
 
2518  * The MSI interrupt handler for the NAPI case (i.e., response queues serviced
 
2519  * by NAPI polling).  Handles data events from SGE response queues as well as
 
2520  * error and other async events as they all use the same MSI vector.  We use
 
2521  * one SGE response queue per port in this mode and protect all response
 
2522  * queues with queue 0's lock.
 
2524 static irqreturn_t t3_intr_msi_napi(int irq, void *cookie)
 
2527         struct adapter *adap = cookie;
 
2528         struct sge_rspq *q = &adap->sge.qs[0].rspq;
 
2530         spin_lock(&q->lock);
 
2532         new_packets = rspq_check_napi(&adap->sge.qs[0]);
 
2533         if (adap->params.nports == 2)
 
2534                 new_packets += rspq_check_napi(&adap->sge.qs[1]);
 
2535         if (!new_packets && t3_slow_intr_handler(adap) == 0)
 
2536                 q->unhandled_irqs++;
 
2538         spin_unlock(&q->lock);
 
2543  * A helper function that processes responses and issues GTS.
 
2545 static inline int process_responses_gts(struct adapter *adap,
 
2546                                         struct sge_rspq *rq)
 
2550         work = process_responses(adap, rspq_to_qset(rq), -1);
 
2551         t3_write_reg(adap, A_SG_GTS, V_RSPQ(rq->cntxt_id) |
 
2552                      V_NEWTIMER(rq->next_holdoff) | V_NEWINDEX(rq->cidx));
 
2557  * The legacy INTx interrupt handler.  This needs to handle data events from
 
2558  * SGE response queues as well as error and other async events as they all use
 
2559  * the same interrupt pin.  We use one SGE response queue per port in this mode
 
2560  * and protect all response queues with queue 0's lock.
 
2562 static irqreturn_t t3_intr(int irq, void *cookie)
 
2564         int work_done, w0, w1;
 
2565         struct adapter *adap = cookie;
 
2566         struct sge_rspq *q0 = &adap->sge.qs[0].rspq;
 
2567         struct sge_rspq *q1 = &adap->sge.qs[1].rspq;
 
2569         spin_lock(&q0->lock);
 
2571         w0 = is_new_response(&q0->desc[q0->cidx], q0);
 
2572         w1 = adap->params.nports == 2 &&
 
2573             is_new_response(&q1->desc[q1->cidx], q1);
 
2575         if (likely(w0 | w1)) {
 
2576                 t3_write_reg(adap, A_PL_CLI, 0);
 
2577                 t3_read_reg(adap, A_PL_CLI);    /* flush */
 
2580                         process_responses_gts(adap, q0);
 
2583                         process_responses_gts(adap, q1);
 
2585                 work_done = w0 | w1;
 
2587                 work_done = t3_slow_intr_handler(adap);
 
2589         spin_unlock(&q0->lock);
 
2590         return IRQ_RETVAL(work_done != 0);
 
2594  * Interrupt handler for legacy INTx interrupts for T3B-based cards.
 
2595  * Handles data events from SGE response queues as well as error and other
 
2596  * async events as they all use the same interrupt pin.  We use one SGE
 
2597  * response queue per port in this mode and protect all response queues with
 
2600 static irqreturn_t t3b_intr(int irq, void *cookie)
 
2603         struct adapter *adap = cookie;
 
2604         struct sge_rspq *q0 = &adap->sge.qs[0].rspq;
 
2606         t3_write_reg(adap, A_PL_CLI, 0);
 
2607         map = t3_read_reg(adap, A_SG_DATA_INTR);
 
2609         if (unlikely(!map))     /* shared interrupt, most likely */
 
2612         spin_lock(&q0->lock);
 
2614         if (unlikely(map & F_ERRINTR))
 
2615                 t3_slow_intr_handler(adap);
 
2617         if (likely(map & 1))
 
2618                 process_responses_gts(adap, q0);
 
2621                 process_responses_gts(adap, &adap->sge.qs[1].rspq);
 
2623         spin_unlock(&q0->lock);
 
2628  * NAPI interrupt handler for legacy INTx interrupts for T3B-based cards.
 
2629  * Handles data events from SGE response queues as well as error and other
 
2630  * async events as they all use the same interrupt pin.  We use one SGE
 
2631  * response queue per port in this mode and protect all response queues with
 
2634 static irqreturn_t t3b_intr_napi(int irq, void *cookie)
 
2637         struct adapter *adap = cookie;
 
2638         struct sge_qset *qs0 = &adap->sge.qs[0];
 
2639         struct sge_rspq *q0 = &qs0->rspq;
 
2641         t3_write_reg(adap, A_PL_CLI, 0);
 
2642         map = t3_read_reg(adap, A_SG_DATA_INTR);
 
2644         if (unlikely(!map))     /* shared interrupt, most likely */
 
2647         spin_lock(&q0->lock);
 
2649         if (unlikely(map & F_ERRINTR))
 
2650                 t3_slow_intr_handler(adap);
 
2652         if (likely(map & 1))
 
2653                 napi_schedule(&qs0->napi);
 
2656                 napi_schedule(&adap->sge.qs[1].napi);
 
2658         spin_unlock(&q0->lock);
 
2663  *      t3_intr_handler - select the top-level interrupt handler
 
2664  *      @adap: the adapter
 
2665  *      @polling: whether using NAPI to service response queues
 
2667  *      Selects the top-level interrupt handler based on the type of interrupts
 
2668  *      (MSI-X, MSI, or legacy) and whether NAPI will be used to service the
 
2671 irq_handler_t t3_intr_handler(struct adapter *adap, int polling)
 
2673         if (adap->flags & USING_MSIX)
 
2674                 return polling ? t3_sge_intr_msix_napi : t3_sge_intr_msix;
 
2675         if (adap->flags & USING_MSI)
 
2676                 return polling ? t3_intr_msi_napi : t3_intr_msi;
 
2677         if (adap->params.rev > 0)
 
2678                 return polling ? t3b_intr_napi : t3b_intr;
 
2682 #define SGE_PARERR (F_CPPARITYERROR | F_OCPARITYERROR | F_RCPARITYERROR | \
 
2683                     F_IRPARITYERROR | V_ITPARITYERROR(M_ITPARITYERROR) | \
 
2684                     V_FLPARITYERROR(M_FLPARITYERROR) | F_LODRBPARITYERROR | \
 
2685                     F_HIDRBPARITYERROR | F_LORCQPARITYERROR | \
 
2687 #define SGE_FRAMINGERR (F_UC_REQ_FRAMINGERROR | F_R_REQ_FRAMINGERROR)
 
2688 #define SGE_FATALERR (SGE_PARERR | SGE_FRAMINGERR | F_RSPQCREDITOVERFOW | \
 
2692  *      t3_sge_err_intr_handler - SGE async event interrupt handler
 
2693  *      @adapter: the adapter
 
2695  *      Interrupt handler for SGE asynchronous (non-data) events.
 
2697 void t3_sge_err_intr_handler(struct adapter *adapter)
 
2699         unsigned int v, status = t3_read_reg(adapter, A_SG_INT_CAUSE);
 
2701         if (status & SGE_PARERR)
 
2702                 CH_ALERT(adapter, "SGE parity error (0x%x)\n",
 
2703                          status & SGE_PARERR);
 
2704         if (status & SGE_FRAMINGERR)
 
2705                 CH_ALERT(adapter, "SGE framing error (0x%x)\n",
 
2706                          status & SGE_FRAMINGERR);
 
2708         if (status & F_RSPQCREDITOVERFOW)
 
2709                 CH_ALERT(adapter, "SGE response queue credit overflow\n");
 
2711         if (status & F_RSPQDISABLED) {
 
2712                 v = t3_read_reg(adapter, A_SG_RSPQ_FL_STATUS);
 
2715                          "packet delivered to disabled response queue "
 
2716                          "(0x%x)\n", (v >> S_RSPQ0DISABLED) & 0xff);
 
2719         if (status & (F_HIPIODRBDROPERR | F_LOPIODRBDROPERR))
 
2720                 CH_ALERT(adapter, "SGE dropped %s priority doorbell\n",
 
2721                          status & F_HIPIODRBDROPERR ? "high" : "lo");
 
2723         t3_write_reg(adapter, A_SG_INT_CAUSE, status);
 
2724         if (status &  SGE_FATALERR)
 
2725                 t3_fatal_err(adapter);
 
2729  *      sge_timer_cb - perform periodic maintenance of an SGE qset
 
2730  *      @data: the SGE queue set to maintain
 
2732  *      Runs periodically from a timer to perform maintenance of an SGE queue
 
2733  *      set.  It performs two tasks:
 
2735  *      a) Cleans up any completed Tx descriptors that may still be pending.
 
2736  *      Normal descriptor cleanup happens when new packets are added to a Tx
 
2737  *      queue so this timer is relatively infrequent and does any cleanup only
 
2738  *      if the Tx queue has not seen any new packets in a while.  We make a
 
2739  *      best effort attempt to reclaim descriptors, in that we don't wait
 
2740  *      around if we cannot get a queue's lock (which most likely is because
 
2741  *      someone else is queueing new packets and so will also handle the clean
 
2742  *      up).  Since control queues use immediate data exclusively we don't
 
2743  *      bother cleaning them up here.
 
2745  *      b) Replenishes Rx queues that have run out due to memory shortage.
 
2746  *      Normally new Rx buffers are added when existing ones are consumed but
 
2747  *      when out of memory a queue can become empty.  We try to add only a few
 
2748  *      buffers here, the queue will be replenished fully as these new buffers
 
2749  *      are used up if memory shortage has subsided.
 
2751 static void sge_timer_cb(unsigned long data)
 
2754         struct sge_qset *qs = (struct sge_qset *)data;
 
2755         struct adapter *adap = qs->adap;
 
2757         if (spin_trylock(&qs->txq[TXQ_ETH].lock)) {
 
2758                 reclaim_completed_tx(adap, &qs->txq[TXQ_ETH]);
 
2759                 spin_unlock(&qs->txq[TXQ_ETH].lock);
 
2761         if (spin_trylock(&qs->txq[TXQ_OFLD].lock)) {
 
2762                 reclaim_completed_tx(adap, &qs->txq[TXQ_OFLD]);
 
2763                 spin_unlock(&qs->txq[TXQ_OFLD].lock);
 
2765         lock = (adap->flags & USING_MSIX) ? &qs->rspq.lock :
 
2766                                             &adap->sge.qs[0].rspq.lock;
 
2767         if (spin_trylock_irq(lock)) {
 
2768                 if (!napi_is_scheduled(&qs->napi)) {
 
2769                         u32 status = t3_read_reg(adap, A_SG_RSPQ_FL_STATUS);
 
2771                         if (qs->fl[0].credits < qs->fl[0].size)
 
2772                                 __refill_fl(adap, &qs->fl[0]);
 
2773                         if (qs->fl[1].credits < qs->fl[1].size)
 
2774                                 __refill_fl(adap, &qs->fl[1]);
 
2776                         if (status & (1 << qs->rspq.cntxt_id)) {
 
2778                                 if (qs->rspq.credits) {
 
2779                                         refill_rspq(adap, &qs->rspq, 1);
 
2781                                         qs->rspq.restarted++;
 
2782                                         t3_write_reg(adap, A_SG_RSPQ_FL_STATUS,
 
2783                                                      1 << qs->rspq.cntxt_id);
 
2787                 spin_unlock_irq(lock);
 
2789         mod_timer(&qs->tx_reclaim_timer, jiffies + TX_RECLAIM_PERIOD);
 
2793  *      t3_update_qset_coalesce - update coalescing settings for a queue set
 
2794  *      @qs: the SGE queue set
 
2795  *      @p: new queue set parameters
 
2797  *      Update the coalescing settings for an SGE queue set.  Nothing is done
 
2798  *      if the queue set is not initialized yet.
 
2800 void t3_update_qset_coalesce(struct sge_qset *qs, const struct qset_params *p)
 
2802         qs->rspq.holdoff_tmr = max(p->coalesce_usecs * 10, 1U);/* can't be 0 */
 
2803         qs->rspq.polling = p->polling;
 
2804         qs->napi.poll = p->polling ? napi_rx_handler : ofld_poll;
 
2808  *      t3_sge_alloc_qset - initialize an SGE queue set
 
2809  *      @adapter: the adapter
 
2810  *      @id: the queue set id
 
2811  *      @nports: how many Ethernet ports will be using this queue set
 
2812  *      @irq_vec_idx: the IRQ vector index for response queue interrupts
 
2813  *      @p: configuration parameters for this queue set
 
2814  *      @ntxq: number of Tx queues for the queue set
 
2815  *      @netdev: net device associated with this queue set
 
2816  *      @netdevq: net device TX queue associated with this queue set
 
2818  *      Allocate resources and initialize an SGE queue set.  A queue set
 
2819  *      comprises a response queue, two Rx free-buffer queues, and up to 3
 
2820  *      Tx queues.  The Tx queues are assigned roles in the order Ethernet
 
2821  *      queue, offload queue, and control queue.
 
2823 int t3_sge_alloc_qset(struct adapter *adapter, unsigned int id, int nports,
 
2824                       int irq_vec_idx, const struct qset_params *p,
 
2825                       int ntxq, struct net_device *dev,
 
2826                       struct netdev_queue *netdevq)
 
2828         int i, avail, ret = -ENOMEM;
 
2829         struct sge_qset *q = &adapter->sge.qs[id];
 
2831         init_qset_cntxt(q, id);
 
2832         setup_timer(&q->tx_reclaim_timer, sge_timer_cb, (unsigned long)q);
 
2834         q->fl[0].desc = alloc_ring(adapter->pdev, p->fl_size,
 
2835                                    sizeof(struct rx_desc),
 
2836                                    sizeof(struct rx_sw_desc),
 
2837                                    &q->fl[0].phys_addr, &q->fl[0].sdesc);
 
2841         q->fl[1].desc = alloc_ring(adapter->pdev, p->jumbo_size,
 
2842                                    sizeof(struct rx_desc),
 
2843                                    sizeof(struct rx_sw_desc),
 
2844                                    &q->fl[1].phys_addr, &q->fl[1].sdesc);
 
2848         q->rspq.desc = alloc_ring(adapter->pdev, p->rspq_size,
 
2849                                   sizeof(struct rsp_desc), 0,
 
2850                                   &q->rspq.phys_addr, NULL);
 
2854         for (i = 0; i < ntxq; ++i) {
 
2856                  * The control queue always uses immediate data so does not
 
2857                  * need to keep track of any sk_buffs.
 
2859                 size_t sz = i == TXQ_CTRL ? 0 : sizeof(struct tx_sw_desc);
 
2861                 q->txq[i].desc = alloc_ring(adapter->pdev, p->txq_size[i],
 
2862                                             sizeof(struct tx_desc), sz,
 
2863                                             &q->txq[i].phys_addr,
 
2865                 if (!q->txq[i].desc)
 
2869                 q->txq[i].size = p->txq_size[i];
 
2870                 spin_lock_init(&q->txq[i].lock);
 
2871                 skb_queue_head_init(&q->txq[i].sendq);
 
2874         tasklet_init(&q->txq[TXQ_OFLD].qresume_tsk, restart_offloadq,
 
2876         tasklet_init(&q->txq[TXQ_CTRL].qresume_tsk, restart_ctrlq,
 
2879         q->fl[0].gen = q->fl[1].gen = 1;
 
2880         q->fl[0].size = p->fl_size;
 
2881         q->fl[1].size = p->jumbo_size;
 
2884         q->rspq.size = p->rspq_size;
 
2885         spin_lock_init(&q->rspq.lock);
 
2886         skb_queue_head_init(&q->rspq.rx_queue);
 
2888         q->txq[TXQ_ETH].stop_thres = nports *
 
2889             flits_to_desc(sgl_len(MAX_SKB_FRAGS + 1) + 3);
 
2891 #if FL0_PG_CHUNK_SIZE > 0
 
2892         q->fl[0].buf_size = FL0_PG_CHUNK_SIZE;
 
2894         q->fl[0].buf_size = SGE_RX_SM_BUF_SIZE + sizeof(struct cpl_rx_data);
 
2896 #if FL1_PG_CHUNK_SIZE > 0
 
2897         q->fl[1].buf_size = FL1_PG_CHUNK_SIZE;
 
2899         q->fl[1].buf_size = is_offload(adapter) ?
 
2900                 (16 * 1024) - SKB_DATA_ALIGN(sizeof(struct skb_shared_info)) :
 
2901                 MAX_FRAME_SIZE + 2 + sizeof(struct cpl_rx_pkt);
 
2904         q->fl[0].use_pages = FL0_PG_CHUNK_SIZE > 0;
 
2905         q->fl[1].use_pages = FL1_PG_CHUNK_SIZE > 0;
 
2906         q->fl[0].order = FL0_PG_ORDER;
 
2907         q->fl[1].order = FL1_PG_ORDER;
 
2909         spin_lock_irq(&adapter->sge.reg_lock);
 
2911         /* FL threshold comparison uses < */
 
2912         ret = t3_sge_init_rspcntxt(adapter, q->rspq.cntxt_id, irq_vec_idx,
 
2913                                    q->rspq.phys_addr, q->rspq.size,
 
2914                                    q->fl[0].buf_size, 1, 0);
 
2918         for (i = 0; i < SGE_RXQ_PER_SET; ++i) {
 
2919                 ret = t3_sge_init_flcntxt(adapter, q->fl[i].cntxt_id, 0,
 
2920                                           q->fl[i].phys_addr, q->fl[i].size,
 
2921                                           q->fl[i].buf_size, p->cong_thres, 1,
 
2927         ret = t3_sge_init_ecntxt(adapter, q->txq[TXQ_ETH].cntxt_id, USE_GTS,
 
2928                                  SGE_CNTXT_ETH, id, q->txq[TXQ_ETH].phys_addr,
 
2929                                  q->txq[TXQ_ETH].size, q->txq[TXQ_ETH].token,
 
2935                 ret = t3_sge_init_ecntxt(adapter, q->txq[TXQ_OFLD].cntxt_id,
 
2936                                          USE_GTS, SGE_CNTXT_OFLD, id,
 
2937                                          q->txq[TXQ_OFLD].phys_addr,
 
2938                                          q->txq[TXQ_OFLD].size, 0, 1, 0);
 
2944                 ret = t3_sge_init_ecntxt(adapter, q->txq[TXQ_CTRL].cntxt_id, 0,
 
2946                                          q->txq[TXQ_CTRL].phys_addr,
 
2947                                          q->txq[TXQ_CTRL].size,
 
2948                                          q->txq[TXQ_CTRL].token, 1, 0);
 
2953         spin_unlock_irq(&adapter->sge.reg_lock);
 
2958         t3_update_qset_coalesce(q, p);
 
2960         avail = refill_fl(adapter, &q->fl[0], q->fl[0].size,
 
2961                           GFP_KERNEL | __GFP_COMP);
 
2963                 CH_ALERT(adapter, "free list queue 0 initialization failed\n");
 
2966         if (avail < q->fl[0].size)
 
2967                 CH_WARN(adapter, "free list queue 0 enabled with %d credits\n",
 
2970         avail = refill_fl(adapter, &q->fl[1], q->fl[1].size,
 
2971                           GFP_KERNEL | __GFP_COMP);
 
2972         if (avail < q->fl[1].size)
 
2973                 CH_WARN(adapter, "free list queue 1 enabled with %d credits\n",
 
2975         refill_rspq(adapter, &q->rspq, q->rspq.size - 1);
 
2977         t3_write_reg(adapter, A_SG_GTS, V_RSPQ(q->rspq.cntxt_id) |
 
2978                      V_NEWTIMER(q->rspq.holdoff_tmr));
 
2980         mod_timer(&q->tx_reclaim_timer, jiffies + TX_RECLAIM_PERIOD);
 
2984         spin_unlock_irq(&adapter->sge.reg_lock);
 
2986         t3_free_qset(adapter, q);
 
2991  *      t3_stop_sge_timers - stop SGE timer call backs
 
2992  *      @adap: the adapter
 
2994  *      Stops each SGE queue set's timer call back
 
2996 void t3_stop_sge_timers(struct adapter *adap)
 
3000         for (i = 0; i < SGE_QSETS; ++i) {
 
3001                 struct sge_qset *q = &adap->sge.qs[i];
 
3003                 if (q->tx_reclaim_timer.function)
 
3004                         del_timer_sync(&q->tx_reclaim_timer);
 
3009  *      t3_free_sge_resources - free SGE resources
 
3010  *      @adap: the adapter
 
3012  *      Frees resources used by the SGE queue sets.
 
3014 void t3_free_sge_resources(struct adapter *adap)
 
3018         for (i = 0; i < SGE_QSETS; ++i)
 
3019                 t3_free_qset(adap, &adap->sge.qs[i]);
 
3023  *      t3_sge_start - enable SGE
 
3024  *      @adap: the adapter
 
3026  *      Enables the SGE for DMAs.  This is the last step in starting packet
 
3029 void t3_sge_start(struct adapter *adap)
 
3031         t3_set_reg_field(adap, A_SG_CONTROL, F_GLOBALENABLE, F_GLOBALENABLE);
 
3035  *      t3_sge_stop - disable SGE operation
 
3036  *      @adap: the adapter
 
3038  *      Disables the DMA engine.  This can be called in emeregencies (e.g.,
 
3039  *      from error interrupts) or from normal process context.  In the latter
 
3040  *      case it also disables any pending queue restart tasklets.  Note that
 
3041  *      if it is called in interrupt context it cannot disable the restart
 
3042  *      tasklets as it cannot wait, however the tasklets will have no effect
 
3043  *      since the doorbells are disabled and the driver will call this again
 
3044  *      later from process context, at which time the tasklets will be stopped
 
3045  *      if they are still running.
 
3047 void t3_sge_stop(struct adapter *adap)
 
3049         t3_set_reg_field(adap, A_SG_CONTROL, F_GLOBALENABLE, 0);
 
3050         if (!in_interrupt()) {
 
3053                 for (i = 0; i < SGE_QSETS; ++i) {
 
3054                         struct sge_qset *qs = &adap->sge.qs[i];
 
3056                         tasklet_kill(&qs->txq[TXQ_OFLD].qresume_tsk);
 
3057                         tasklet_kill(&qs->txq[TXQ_CTRL].qresume_tsk);
 
3063  *      t3_sge_init - initialize SGE
 
3064  *      @adap: the adapter
 
3065  *      @p: the SGE parameters
 
3067  *      Performs SGE initialization needed every time after a chip reset.
 
3068  *      We do not initialize any of the queue sets here, instead the driver
 
3069  *      top-level must request those individually.  We also do not enable DMA
 
3070  *      here, that should be done after the queues have been set up.
 
3072 void t3_sge_init(struct adapter *adap, struct sge_params *p)
 
3074         unsigned int ctrl, ups = ffs(pci_resource_len(adap->pdev, 2) >> 12);
 
3076         ctrl = F_DROPPKT | V_PKTSHIFT(2) | F_FLMODE | F_AVOIDCQOVFL |
 
3077             F_CQCRDTCTRL | F_CONGMODE | F_TNLFLMODE | F_FATLPERREN |
 
3078             V_HOSTPAGESIZE(PAGE_SHIFT - 11) | F_BIGENDIANINGRESS |
 
3079             V_USERSPACESIZE(ups ? ups - 1 : 0) | F_ISCSICOALESCING;
 
3080 #if SGE_NUM_GENBITS == 1
 
3081         ctrl |= F_EGRGENCTRL;
 
3083         if (adap->params.rev > 0) {
 
3084                 if (!(adap->flags & (USING_MSIX | USING_MSI)))
 
3085                         ctrl |= F_ONEINTMULTQ | F_OPTONEINTMULTQ;
 
3087         t3_write_reg(adap, A_SG_CONTROL, ctrl);
 
3088         t3_write_reg(adap, A_SG_EGR_RCQ_DRB_THRSH, V_HIRCQDRBTHRSH(512) |
 
3089                      V_LORCQDRBTHRSH(512));
 
3090         t3_write_reg(adap, A_SG_TIMER_TICK, core_ticks_per_usec(adap) / 10);
 
3091         t3_write_reg(adap, A_SG_CMDQ_CREDIT_TH, V_THRESHOLD(32) |
 
3092                      V_TIMEOUT(200 * core_ticks_per_usec(adap)));
 
3093         t3_write_reg(adap, A_SG_HI_DRB_HI_THRSH,
 
3094                      adap->params.rev < T3_REV_C ? 1000 : 500);
 
3095         t3_write_reg(adap, A_SG_HI_DRB_LO_THRSH, 256);
 
3096         t3_write_reg(adap, A_SG_LO_DRB_HI_THRSH, 1000);
 
3097         t3_write_reg(adap, A_SG_LO_DRB_LO_THRSH, 256);
 
3098         t3_write_reg(adap, A_SG_OCO_BASE, V_BASE1(0xfff));
 
3099         t3_write_reg(adap, A_SG_DRB_PRI_THRESH, 63 * 1024);
 
3103  *      t3_sge_prep - one-time SGE initialization
 
3104  *      @adap: the associated adapter
 
3105  *      @p: SGE parameters
 
3107  *      Performs one-time initialization of SGE SW state.  Includes determining
 
3108  *      defaults for the assorted SGE parameters, which admins can change until
 
3109  *      they are used to initialize the SGE.
 
3111 void t3_sge_prep(struct adapter *adap, struct sge_params *p)
 
3115         p->max_pkt_size = (16 * 1024) - sizeof(struct cpl_rx_data) -
 
3116             SKB_DATA_ALIGN(sizeof(struct skb_shared_info));
 
3118         for (i = 0; i < SGE_QSETS; ++i) {
 
3119                 struct qset_params *q = p->qset + i;
 
3121                 q->polling = adap->params.rev > 0;
 
3122                 q->coalesce_usecs = 5;
 
3123                 q->rspq_size = 1024;
 
3125                 q->jumbo_size = 512;
 
3126                 q->txq_size[TXQ_ETH] = 1024;
 
3127                 q->txq_size[TXQ_OFLD] = 1024;
 
3128                 q->txq_size[TXQ_CTRL] = 256;
 
3132         spin_lock_init(&adap->sge.reg_lock);
 
3136  *      t3_get_desc - dump an SGE descriptor for debugging purposes
 
3137  *      @qs: the queue set
 
3138  *      @qnum: identifies the specific queue (0..2: Tx, 3:response, 4..5: Rx)
 
3139  *      @idx: the descriptor index in the queue
 
3140  *      @data: where to dump the descriptor contents
 
3142  *      Dumps the contents of a HW descriptor of an SGE queue.  Returns the
 
3143  *      size of the descriptor.
 
3145 int t3_get_desc(const struct sge_qset *qs, unsigned int qnum, unsigned int idx,
 
3146                 unsigned char *data)
 
3152                 if (!qs->txq[qnum].desc || idx >= qs->txq[qnum].size)
 
3154                 memcpy(data, &qs->txq[qnum].desc[idx], sizeof(struct tx_desc));
 
3155                 return sizeof(struct tx_desc);
 
3159                 if (!qs->rspq.desc || idx >= qs->rspq.size)
 
3161                 memcpy(data, &qs->rspq.desc[idx], sizeof(struct rsp_desc));
 
3162                 return sizeof(struct rsp_desc);
 
3166         if (!qs->fl[qnum].desc || idx >= qs->fl[qnum].size)
 
3168         memcpy(data, &qs->fl[qnum].desc[idx], sizeof(struct rx_desc));
 
3169         return sizeof(struct rx_desc);