2  * Copyright (c) 2004 Sam Leffler, Errno Consulting
 
   3  * Copyright (c) 2004 Video54 Technologies, Inc.
 
   4  * Copyright (c) 2008 Atheros Communications Inc.
 
   6  * Permission to use, copy, modify, and/or distribute this software for any
 
   7  * purpose with or without fee is hereby granted, provided that the above
 
   8  * copyright notice and this permission notice appear in all copies.
 
  10  * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
 
  11  * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
 
  12  * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
 
  13  * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
 
  14  * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
 
  15  * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
 
  16  * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
 
  26 #define ATH_RATE_MAX     30
 
  27 #define RATE_TABLE_SIZE  64
 
  28 #define MAX_TX_RATE_PHY  48
 
  30 /* VALID_ALL - valid for 20/40/Legacy,
 
  31  * VALID - Legacy only,
 
  32  * VALID_20 - HT 20 only,
 
  33  * VALID_40 - HT 40 only */
 
  39 #define VALID_2040 (VALID_20|VALID_40)
 
  40 #define VALID_ALL  (VALID_2040|VALID)
 
  42 #define WLAN_RC_PHY_DS(_phy)   ((_phy == WLAN_RC_PHY_HT_20_DS)          \
 
  43                                 || (_phy == WLAN_RC_PHY_HT_40_DS)       \
 
  44                                 || (_phy == WLAN_RC_PHY_HT_20_DS_HGI)   \
 
  45                                 || (_phy == WLAN_RC_PHY_HT_40_DS_HGI))
 
  46 #define WLAN_RC_PHY_40(_phy)   ((_phy == WLAN_RC_PHY_HT_40_SS)          \
 
  47                                 || (_phy == WLAN_RC_PHY_HT_40_DS)       \
 
  48                                 || (_phy == WLAN_RC_PHY_HT_40_SS_HGI)   \
 
  49                                 || (_phy == WLAN_RC_PHY_HT_40_DS_HGI))
 
  50 #define WLAN_RC_PHY_SGI(_phy)  ((_phy == WLAN_RC_PHY_HT_20_SS_HGI)      \
 
  51                                 || (_phy == WLAN_RC_PHY_HT_20_DS_HGI)   \
 
  52                                 || (_phy == WLAN_RC_PHY_HT_40_SS_HGI)   \
 
  53                                 || (_phy == WLAN_RC_PHY_HT_40_DS_HGI))
 
  55 #define WLAN_RC_PHY_HT(_phy)    (_phy >= WLAN_RC_PHY_HT_20_SS)
 
  57 #define WLAN_RC_CAP_MODE(capflag) (((capflag & WLAN_RC_HT_FLAG) ?       \
 
  58                 (capflag & WLAN_RC_40_FLAG) ? VALID_40 : VALID_20 : VALID))
 
  60 /* Return TRUE if flag supports HT20 && client supports HT20 or
 
  61  * return TRUE if flag supports HT40 && client supports HT40.
 
  62  * This is used becos some rates overlap between HT20/HT40.
 
  64 #define WLAN_RC_PHY_HT_VALID(flag, capflag)                     \
 
  65         (((flag & VALID_20) && !(capflag & WLAN_RC_40_FLAG)) || \
 
  66          ((flag & VALID_40) && (capflag & WLAN_RC_40_FLAG)))
 
  68 #define WLAN_RC_DS_FLAG         (0x01)
 
  69 #define WLAN_RC_40_FLAG         (0x02)
 
  70 #define WLAN_RC_SGI_FLAG        (0x04)
 
  71 #define WLAN_RC_HT_FLAG         (0x08)
 
  74  * struct ath_rate_table - Rate Control table
 
  75  * @valid: valid for use in rate control
 
  76  * @valid_single_stream: valid for use in rate control for
 
  77  *      single stream operation
 
  79  * @ratekbps: rate in Kbits per second
 
  80  * @user_ratekbps: user rate in Kbits per second
 
  81  * @ratecode: rate that goes into HW descriptors
 
  82  * @short_preamble: Mask for enabling short preamble in ratecode for CCK
 
  83  * @dot11rate: value that goes into supported
 
  84  *      rates info element of MLME
 
  85  * @ctrl_rate: Index of next lower basic rate, used for duration computation
 
  86  * @max_4ms_framelen: maximum frame length(bytes) for tx duration
 
  87  * @probe_interval: interval for rate control to probe for other rates
 
  88  * @rssi_reduce_interval: interval for rate control to reduce rssi
 
  89  * @initial_ratemax: initial ratemax value
 
  91 struct ath_rate_table {
 
  93         u8 rateCodeToIndex[256];
 
  96                 int valid_single_stream;
 
 104                 int8_t rssi_ack_validmin;
 
 105                 int8_t rssi_ack_deltamin;
 
 110                 u32 max_4ms_framelen;
 
 113         } info[RATE_TABLE_SIZE];
 
 115         u32 rssi_reduce_interval;
 
 119 struct ath_tx_ratectrl_state {
 
 120         int8_t rssi_thres;      /* required rssi for this rate (dB) */
 
 121         u8 per;                 /* recent estimate of packet error rate (%) */
 
 126         u8 rs_rates[ATH_RATE_MAX];
 
 130  * struct ath_rate_priv - Rate Control priv data
 
 132  * @rssi_last: last ACK rssi
 
 133  * @rssi_last_lookup: last ACK rssi used for lookup
 
 134  * @rssi_last_prev: previous last ACK rssi
 
 135  * @rssi_last_prev2: 2nd previous last ACK rssi
 
 136  * @rssi_sum_cnt: count of rssi_sum for averaging
 
 137  * @rssi_sum_rate: rate that we are averaging
 
 138  * @rssi_sum: running sum of rssi for averaging
 
 139  * @probe_rate: rate we are probing at
 
 140  * @rssi_time: msec timestamp for last ack rssi
 
 141  * @rssi_down_time: msec timestamp for last down step
 
 142  * @probe_time: msec timestamp for last probe
 
 143  * @hw_maxretry_pktcnt: num of packets since we got HW max retry error
 
 144  * @max_valid_rate: maximum number of valid rate
 
 145  * @per_down_time: msec timestamp for last PER down step
 
 146  * @valid_phy_ratecnt: valid rate count
 
 147  * @rate_max_phy: phy index for the max rate
 
 148  * @probe_interval: interval for ratectrl to probe for other rates
 
 149  * @prev_data_rix: rate idx of last data frame
 
 150  * @ht_cap: HT capabilities
 
 151  * @single_stream: When TRUE, only single TX stream possible
 
 152  * @neg_rates: Negotatied rates
 
 153  * @neg_ht_rates: Negotiated HT rates
 
 155 struct ath_rate_priv {
 
 157         int8_t rssi_last_lookup;
 
 158         int8_t rssi_last_prev;
 
 159         int8_t rssi_last_prev2;
 
 160         int32_t rssi_sum_cnt;
 
 161         int32_t rssi_sum_rate;
 
 165         u8 hw_maxretry_pktcnt;
 
 167         u8 valid_rate_index[RATE_TABLE_SIZE];
 
 170         u8 valid_phy_ratecnt[WLAN_RC_PHY_MAX];
 
 171         u8 valid_phy_rateidx[WLAN_RC_PHY_MAX][RATE_TABLE_SIZE];
 
 180         u32 tx_triglevel_max;
 
 181         struct ath_tx_ratectrl_state state[RATE_TABLE_SIZE];
 
 182         struct ath_rateset neg_rates;
 
 183         struct ath_rateset neg_ht_rates;
 
 184         struct ath_rate_softc *asc;
 
 187 struct ath_tx_info_priv {
 
 188         struct ath_tx_status tx;
 
 194 #define ATH_TX_INFO_PRIV(tx_info) \
 
 195         ((struct ath_tx_info_priv *)((tx_info)->rate_driver_data[0]))
 
 197 void ath_rate_attach(struct ath_softc *sc);
 
 198 u8 ath_rate_findrateix(struct ath_softc *sc, u8 dot11_rate);
 
 199 int ath_rate_control_register(void);
 
 200 void ath_rate_control_unregister(void);